/[pcre]/code/trunk/pcretest.c

Diff of /code/trunk/pcretest.c

Parent Directory | Revision Log | View Patch Patch

-revision 65 by nigel,
Sat Feb 24 21:40:08 2007 UTC
+revision 905 by zherczeg,
Mon Jan 23 19:26:03 2012 UTC
 Line 4
  /* This program was hacked up as a tester for PCRE. I really should have
  written it more tidily in the first place. Will I ever learn? It has grown and
- been extended and consequently is now rather untidy in places. */
+ been extended and consequently is now rather, er, *very* untidy in places. The
+ addition of 16-bit support has made it even worse. :-(
+ -----------------------------------------------------------------------------
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+     * Redistributions of source code must retain the above copyright notice,
+       this list of conditions and the following disclaimer.
+     * Redistributions in binary form must reproduce the above copyright
+       notice, this list of conditions and the following disclaimer in the
+       documentation and/or other materials provided with the distribution.
+     * Neither the name of the University of Cambridge nor the names of its
+       contributors may be used to endorse or promote products derived from
+       this software without specific prior written permission.
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ -----------------------------------------------------------------------------
+ */
+ /* This program now supports the testing of both the 8-bit and 16-bit PCRE
+ libraries in a single program. This is different from the modules such as
+ pcre_compile.c in the library itself, which are compiled separately for each
+ mode. If both modes are enabled, for example, pcre_compile.c is compiled twice
+ (the second time with COMPILE_PCRE16 defined). By contrast, pcretest.c is
+ compiled only once. Therefore, it must not make use of any of the macros from
+ pcre_internal.h that depend on COMPILE_PCRE8 or COMPILE_PCRE16. It does,
+ however, make use of SUPPORT_PCRE8 and SUPPORT_PCRE16 to ensure that it calls
+ only supported library functions. */
+ #ifdef HAVE_CONFIG_H
+ #include "config.h"
+ #endif
  #include <ctype.h>
  #include <stdio.h>
-Line 12 
 been extended and consequently is now ra
+Line 57 
 been extended and consequently is now ra
  #include <stdlib.h>
  #include <time.h>
  #include <locale.h>
+ #include <errno.h>
+ #ifdef SUPPORT_LIBREADLINE
+ #ifdef HAVE_UNISTD_H
+ #include <unistd.h>
+ #endif
+ #include <readline/readline.h>
+ #include <readline/history.h>
+ #endif
+ /* A number of things vary for Windows builds. Originally, pcretest opened its
+ input and output without "b"; then I was told that "b" was needed in some
+ environments, so it was added for release 5.0 to both the input and output. (It
+ makes no difference on Unix-like systems.) Later I was told that it is wrong
+ for the input on Windows. I've now abstracted the modes into two macros that
+ are set here, to make it easier to fiddle with them, and removed "b" from the
+ input mode under Windows. */
+ #if defined(_WIN32) || defined(WIN32)
+ #include <io.h>                /* For _setmode() */
+ #include <fcntl.h>             /* For _O_BINARY */
+ #define INPUT_MODE   "r"
+ #define OUTPUT_MODE  "wb"
+ #ifndef isatty
+ #define isatty _isatty         /* This is what Windows calls them, I'm told, */
+ #endif                         /* though in some environments they seem to   */
+                                /* be already defined, hence the #ifndefs.    */
+ #ifndef fileno
+ #define fileno _fileno
+ #endif
+ /* A user sent this fix for Borland Builder 5 under Windows. */
+ #ifdef __BORLANDC__
+ #define _setmode(handle, mode) setmode(handle, mode)
+ #endif
+ /* Not Windows */
- /* We need the internal info for displaying the results of pcre_study(). Also
+ #else
- for getting the opcodes for showing compiled code. */
+ #include <sys/time.h>          /* These two includes are needed */
+ #include <sys/resource.h>      /* for setrlimit(). */
+ #define INPUT_MODE   "rb"
+ #define OUTPUT_MODE  "wb"
+ #endif
+ #define PRIV(name) name
+ /* We have to include pcre_internal.h because we need the internal info for
+ displaying the results of pcre_study() and we also need to know about the
+ internal macros, structures, and other internal data values; pcretest has
+ "inside information" compared to a program that strictly follows the PCRE API.
+ Although pcre_internal.h does itself include pcre.h, we explicitly include it
+ here before pcre_internal.h so that the PCRE_EXP_xxx macros get set
+ appropriately for an application, not for building PCRE. */
+ #include "pcre.h"
+ #if defined SUPPORT_PCRE16 && !defined SUPPORT_PCRE8
+ /* Configure internal macros to 16 bit mode. */
+ #define COMPILE_PCRE16
+ #endif
+ #include "pcre_internal.h"
+ /* The pcre_printint() function, which prints the internal form of a compiled
+ regex, is held in a separate file so that (a) it can be compiled in either
+-bit or 16-bit mode, and (b) it can be #included directly in pcre_compile.c
+ when that is compiled in debug mode. */
+ #ifdef SUPPORT_PCRE8
+ void pcre_printint(pcre *external_re, FILE *f, BOOL print_lengths);
+ #endif
+ #ifdef SUPPORT_PCRE16
+ void pcre16_printint(pcre *external_re, FILE *f, BOOL print_lengths);
+ #endif
+ /* We need access to some of the data tables that PCRE uses. So as not to have
+ to keep two copies, we include the source file here, changing the names of the
+ external symbols to prevent clashes. */
+ #define PCRE_INCLUDED
+ #include "pcre_tables.c"
+ /* The definition of the macro PRINTABLE, which determines whether to print an
+ output character as-is or as a hex value when showing compiled patterns, is
+ the same as in the printint.src file. We uses it here in cases when the locale
+ has not been explicitly changed, so as to get consistent output from systems
+ that differ in their output from isprint() even in the "C" locale. */
+ #ifdef EBCDIC
+ #define PRINTABLE(c) ((c) >= 64 && (c) < 255)
+ #else
+ #define PRINTABLE(c) ((c) >= 32 && (c) < 127)
+ #endif
- #define PCRE_SPY        /* For Win32 build, import data, not export */
+ #define PRINTOK(c) (locale_set? isprint(c) : PRINTABLE(c))
- #include "internal.h"
+ /* Posix support is disabled in 16 bit only mode. */
+ #if defined SUPPORT_PCRE16 && !defined SUPPORT_PCRE8 && !defined NOPOSIX
+ #define NOPOSIX
+ #endif
  /* It is possible to compile this test program without including support for
  testing the POSIX interface, though this is not available via the standard
-Line 27 
 Makefile. */
+Line 172 
 Makefile. */
  #include "pcreposix.h"
  #endif
+ /* It is also possible, originally for the benefit of a version that was
+ imported into Exim, to build pcretest without support for UTF8 or UTF16 (define
+ NOUTF), without the interface to the DFA matcher (NODFA). In fact, we
+ automatically cut out the UTF support if PCRE is built without it. */
+ #ifndef SUPPORT_UTF
+ #ifndef NOUTF
+ #define NOUTF
+ #endif
+ #endif
+ /* To make the code a bit tidier for 8-bit and 16-bit support, we define macros
+ for all the pcre[16]_xxx functions (except pcre16_fullinfo, which is called
+ only from one place and is handled differently). I couldn't dream up any way of
+ using a single macro to do this in a generic way, because of the many different
+ argument requirements. We know that at least one of SUPPORT_PCRE8 and
+ SUPPORT_PCRE16 must be set. First define macros for each individual mode; then
+ use these in the definitions of generic macros.
+ **** Special note about the PCHARSxxx macros: the address of the string to be
+ printed is always given as two arguments: a base address followed by an offset.
+ The base address is cast to the correct data size for 8 or 16 bit data; the
+ offset is in units of this size. If the string were given as base+offset in one
+ argument, the casting might be incorrectly applied. */
+ #ifdef SUPPORT_PCRE8
+ #define PCHARS8(lv, p, offset, len, f) \
+   lv = pchars((pcre_uint8 *)(p) + offset, len, f)
+ #define PCHARSV8(p, offset, len, f) \
+   (void)pchars((pcre_uint8 *)(p) + offset, len, f)
+ #define READ_CAPTURE_NAME8(p, cn8, cn16, re) \
+   p = read_capture_name8(p, cn8, re)
+ #define STRLEN8(p) ((int)strlen((char *)p))
+ #define SET_PCRE_CALLOUT8(callout) \
+   pcre_callout = callout
+ #define PCRE_ASSIGN_JIT_STACK8(extra, callback, userdata) \
+    pcre_assign_jit_stack(extra, callback, userdata)
+ #define PCRE_COMPILE8(re, pat, options, error, erroffset, tables) \
+   re = pcre_compile((char *)pat, options, error, erroffset, tables)
+ #define PCRE_COPY_NAMED_SUBSTRING8(rc, re, bptr, offsets, count, \
+     namesptr, cbuffer, size) \
+   rc = pcre_copy_named_substring(re, (char *)bptr, offsets, count, \
+     (char *)namesptr, cbuffer, size)
+ #define PCRE_COPY_SUBSTRING8(rc, bptr, offsets, count, i, cbuffer, size) \
+   rc = pcre_copy_substring((char *)bptr, offsets, count, i, cbuffer, size)
+ #define PCRE_DFA_EXEC8(count, re, extra, bptr, len, start_offset, options, \
+     offsets, size_offsets, workspace, size_workspace) \
+   count = pcre_dfa_exec(re, extra, (char *)bptr, len, start_offset, options, \
+     offsets, size_offsets, workspace, size_workspace)
+ #define PCRE_EXEC8(count, re, extra, bptr, len, start_offset, options, \
+     offsets, size_offsets) \
+   count = pcre_exec(re, extra, (char *)bptr, len, start_offset, options, \
+     offsets, size_offsets)
+ #define PCRE_FREE_STUDY8(extra) \
+   pcre_free_study(extra)
+ #define PCRE_FREE_SUBSTRING8(substring) \
+   pcre_free_substring(substring)
+ #define PCRE_FREE_SUBSTRING_LIST8(listptr) \
+   pcre_free_substring_list(listptr)
+ #define PCRE_GET_NAMED_SUBSTRING8(rc, re, bptr, offsets, count, \
+     getnamesptr, subsptr) \
+   rc = pcre_get_named_substring(re, (char *)bptr, offsets, count, \
+     (char *)getnamesptr, subsptr)
+ #define PCRE_GET_STRINGNUMBER8(n, rc, ptr) \
+   n = pcre_get_stringnumber(re, (char *)ptr)
+ #define PCRE_GET_SUBSTRING8(rc, bptr, offsets, count, i, subsptr) \
+   rc = pcre_get_substring((char *)bptr, offsets, count, i, subsptr)
+ #define PCRE_GET_SUBSTRING_LIST8(rc, bptr, offsets, count, listptr) \
+   rc = pcre_get_substring_list((const char *)bptr, offsets, count, listptr)
+ #define PCRE_PATTERN_TO_HOST_BYTE_ORDER8(rc, re, extra, tables) \
+   rc = pcre_pattern_to_host_byte_order(re, extra, tables)
+ #define PCRE_PRINTINT8(re, outfile, debug_lengths) \
+   pcre_printint(re, outfile, debug_lengths)
+ #define PCRE_STUDY8(extra, re, options, error) \
+   extra = pcre_study(re, options, error)
+ #define PCRE_JIT_STACK_ALLOC8(startsize, maxsize) \
+   pcre_jit_stack_alloc(startsize, maxsize)
+ #define PCRE_JIT_STACK_FREE8(stack) \
+   pcre_jit_stack_free(stack)
+ #endif /* SUPPORT_PCRE8 */
+ /* -----------------------------------------------------------*/
+ #ifdef SUPPORT_PCRE16
+ #define PCHARS16(lv, p, offset, len, f) \
+   lv = pchars16((PCRE_SPTR16)(p) + offset, len, f)
+ #define PCHARSV16(p, offset, len, f) \
+   (void)pchars16((PCRE_SPTR16)(p) + offset, len, f)
+ #define READ_CAPTURE_NAME16(p, cn8, cn16, re) \
+   p = read_capture_name16(p, cn16, re)
+ #define STRLEN16(p) ((int)strlen16((PCRE_SPTR16)p))
+ #define SET_PCRE_CALLOUT16(callout) \
+   pcre16_callout = (int (*)(pcre16_callout_block *))callout
+ #define PCRE_ASSIGN_JIT_STACK16(extra, callback, userdata) \
+   pcre16_assign_jit_stack((pcre16_extra *)extra, \
+     (pcre16_jit_callback)callback, userdata)
+ #define PCRE_COMPILE16(re, pat, options, error, erroffset, tables) \
+   re = (pcre *)pcre16_compile((PCRE_SPTR16)pat, options, error, erroffset, \
+     tables)
+ #define PCRE_COPY_NAMED_SUBSTRING16(rc, re, bptr, offsets, count, \
+     namesptr, cbuffer, size) \
+   rc = pcre16_copy_named_substring((pcre16 *)re, (PCRE_SPTR16)bptr, offsets, \
+     count, (PCRE_SPTR16)namesptr, (PCRE_UCHAR16 *)cbuffer, size/2)
+ #define PCRE_COPY_SUBSTRING16(rc, bptr, offsets, count, i, cbuffer, size) \
+   rc = pcre16_copy_substring((PCRE_SPTR16)bptr, offsets, count, i, \
+     (PCRE_UCHAR16 *)cbuffer, size/2)
+ #define PCRE_DFA_EXEC16(count, re, extra, bptr, len, start_offset, options, \
+     offsets, size_offsets, workspace, size_workspace) \
+   count = pcre16_dfa_exec((pcre16 *)re, (pcre16_extra *)extra, \
+     (PCRE_SPTR16)bptr, len, start_offset, options, offsets, size_offsets, \
+     workspace, size_workspace)
+ #define PCRE_EXEC16(count, re, extra, bptr, len, start_offset, options, \
+     offsets, size_offsets) \
+   count = pcre16_exec((pcre16 *)re, (pcre16_extra *)extra, (PCRE_SPTR16)bptr, \
+     len, start_offset, options, offsets, size_offsets)
+ #define PCRE_FREE_STUDY16(extra) \
+   pcre16_free_study((pcre16_extra *)extra)
+ #define PCRE_FREE_SUBSTRING16(substring) \
+   pcre16_free_substring((PCRE_SPTR16)substring)
+ #define PCRE_FREE_SUBSTRING_LIST16(listptr) \
+   pcre16_free_substring_list((PCRE_SPTR16 *)listptr)
+ #define PCRE_GET_NAMED_SUBSTRING16(rc, re, bptr, offsets, count, \
+     getnamesptr, subsptr) \
+   rc = pcre16_get_named_substring((pcre16 *)re, (PCRE_SPTR16)bptr, offsets, \
+     count, (PCRE_SPTR16)getnamesptr, (PCRE_SPTR16 *)(void*)subsptr)
+ #define PCRE_GET_STRINGNUMBER16(n, rc, ptr) \
+   n = pcre16_get_stringnumber(re, (PCRE_SPTR16)ptr)
+ #define PCRE_GET_SUBSTRING16(rc, bptr, offsets, count, i, subsptr) \
+   rc = pcre16_get_substring((PCRE_SPTR16)bptr, offsets, count, i, \
+     (PCRE_SPTR16 *)(void*)subsptr)
+ #define PCRE_GET_SUBSTRING_LIST16(rc, bptr, offsets, count, listptr) \
+   rc = pcre16_get_substring_list((PCRE_SPTR16)bptr, offsets, count, \
+     (PCRE_SPTR16 **)(void*)listptr)
+ #define PCRE_PATTERN_TO_HOST_BYTE_ORDER16(rc, re, extra, tables) \
+   rc = pcre16_pattern_to_host_byte_order((pcre16 *)re, (pcre16_extra *)extra, \
+     tables)
+ #define PCRE_PRINTINT16(re, outfile, debug_lengths) \
+   pcre16_printint(re, outfile, debug_lengths)
+ #define PCRE_STUDY16(extra, re, options, error) \
+   extra = (pcre_extra *)pcre16_study((pcre16 *)re, options, error)
+ #define PCRE_JIT_STACK_ALLOC16(startsize, maxsize) \
+   (pcre_jit_stack *)pcre16_jit_stack_alloc(startsize, maxsize)
+ #define PCRE_JIT_STACK_FREE16(stack) \
+   pcre16_jit_stack_free((pcre16_jit_stack *)stack)
+ #endif /* SUPPORT_PCRE16 */
+ /* ----- Both modes are supported; a runtime test is needed, except for
+ pcre_config(), and the JIT stack functions, when it doesn't matter which
+ version is called. ----- */
+ #if defined SUPPORT_PCRE8 && defined SUPPORT_PCRE16
+ #define CHAR_SIZE (use_pcre16? 2:1)
+ #define PCHARS(lv, p, offset, len, f) \
+   if (use_pcre16) \
+     PCHARS16(lv, p, offset, len, f); \
+   else \
+     PCHARS8(lv, p, offset, len, f)
+ #define PCHARSV(p, offset, len, f) \
+   if (use_pcre16) \
+     PCHARSV16(p, offset, len, f); \
+   else \
+     PCHARSV8(p, offset, len, f)
+ #define READ_CAPTURE_NAME(p, cn8, cn16, re) \
+   if (use_pcre16) \
+     READ_CAPTURE_NAME16(p, cn8, cn16, re); \
+   else \
+     READ_CAPTURE_NAME8(p, cn8, cn16, re)
+ #define SET_PCRE_CALLOUT(callout) \
+   if (use_pcre16) \
+     SET_PCRE_CALLOUT16(callout); \
+   else \
+     SET_PCRE_CALLOUT8(callout)
+ #define STRLEN(p) (use_pcre16? STRLEN16(p) : STRLEN8(p))
+ #define PCRE_ASSIGN_JIT_STACK(extra, callback, userdata) \
+   if (use_pcre16) \
+     PCRE_ASSIGN_JIT_STACK16(extra, callback, userdata); \
+   else \
+     PCRE_ASSIGN_JIT_STACK8(extra, callback, userdata)
+ #define PCRE_COMPILE(re, pat, options, error, erroffset, tables) \
+   if (use_pcre16) \
+     PCRE_COMPILE16(re, pat, options, error, erroffset, tables); \
+   else \
+     PCRE_COMPILE8(re, pat, options, error, erroffset, tables)
+ #define PCRE_CONFIG pcre_config
+ #define PCRE_COPY_NAMED_SUBSTRING(rc, re, bptr, offsets, count, \
+     namesptr, cbuffer, size) \
+   if (use_pcre16) \
+     PCRE_COPY_NAMED_SUBSTRING16(rc, re, bptr, offsets, count, \
+       namesptr, cbuffer, size); \
+   else \
+     PCRE_COPY_NAMED_SUBSTRING8(rc, re, bptr, offsets, count, \
+       namesptr, cbuffer, size)
+ #define PCRE_COPY_SUBSTRING(rc, bptr, offsets, count, i, cbuffer, size) \
+   if (use_pcre16) \
+     PCRE_COPY_SUBSTRING16(rc, bptr, offsets, count, i, cbuffer, size); \
+   else \
+     PCRE_COPY_SUBSTRING8(rc, bptr, offsets, count, i, cbuffer, size)
+ #define PCRE_DFA_EXEC(count, re, extra, bptr, len, start_offset, options, \
+     offsets, size_offsets, workspace, size_workspace) \
+   if (use_pcre16) \
+     PCRE_DFA_EXEC16(count, re, extra, bptr, len, start_offset, options, \
+       offsets, size_offsets, workspace, size_workspace); \
+   else \
+     PCRE_DFA_EXEC8(count, re, extra, bptr, len, start_offset, options, \
+       offsets, size_offsets, workspace, size_workspace)
+ #define PCRE_EXEC(count, re, extra, bptr, len, start_offset, options, \
+     offsets, size_offsets) \
+   if (use_pcre16) \
+     PCRE_EXEC16(count, re, extra, bptr, len, start_offset, options, \
+       offsets, size_offsets); \
+   else \
+     PCRE_EXEC8(count, re, extra, bptr, len, start_offset, options, \
+       offsets, size_offsets)
+ #define PCRE_FREE_STUDY(extra) \
+   if (use_pcre16) \
+     PCRE_FREE_STUDY16(extra); \
+   else \
+     PCRE_FREE_STUDY8(extra)
+ #define PCRE_FREE_SUBSTRING(substring) \
+   if (use_pcre16) \
+     PCRE_FREE_SUBSTRING16(substring); \
+   else \
+     PCRE_FREE_SUBSTRING8(substring)
+ #define PCRE_FREE_SUBSTRING_LIST(listptr) \
+   if (use_pcre16) \
+     PCRE_FREE_SUBSTRING_LIST16(listptr); \
+   else \
+     PCRE_FREE_SUBSTRING_LIST8(listptr)
+ #define PCRE_GET_NAMED_SUBSTRING(rc, re, bptr, offsets, count, \
+     getnamesptr, subsptr) \
+   if (use_pcre16) \
+     PCRE_GET_NAMED_SUBSTRING16(rc, re, bptr, offsets, count, \
+       getnamesptr, subsptr); \
+   else \
+     PCRE_GET_NAMED_SUBSTRING8(rc, re, bptr, offsets, count, \
+       getnamesptr, subsptr)
+ #define PCRE_GET_STRINGNUMBER(n, rc, ptr) \
+   if (use_pcre16) \
+     PCRE_GET_STRINGNUMBER16(n, rc, ptr); \
+   else \
+     PCRE_GET_STRINGNUMBER8(n, rc, ptr)
+ #define PCRE_GET_SUBSTRING(rc, bptr, use_offsets, count, i, subsptr) \
+   if (use_pcre16) \
+     PCRE_GET_SUBSTRING16(rc, bptr, use_offsets, count, i, subsptr); \
+   else \
+     PCRE_GET_SUBSTRING8(rc, bptr, use_offsets, count, i, subsptr)
+ #define PCRE_GET_SUBSTRING_LIST(rc, bptr, offsets, count, listptr) \
+   if (use_pcre16) \
+     PCRE_GET_SUBSTRING_LIST16(rc, bptr, offsets, count, listptr); \
+   else \
+     PCRE_GET_SUBSTRING_LIST8(rc, bptr, offsets, count, listptr)
+ #define PCRE_JIT_STACK_ALLOC(startsize, maxsize) \
+   (use_pcre16 ? \
+      PCRE_JIT_STACK_ALLOC16(startsize, maxsize) \
+     :PCRE_JIT_STACK_ALLOC8(startsize, maxsize))
+ #define PCRE_JIT_STACK_FREE(stack) \
+   if (use_pcre16) \
+     PCRE_JIT_STACK_FREE16(stack); \
+   else \
+     PCRE_JIT_STACK_FREE8(stack)
+ #define PCRE_MAKETABLES \
+   (use_pcre16? pcre16_maketables() : pcre_maketables())
+ #define PCRE_PATTERN_TO_HOST_BYTE_ORDER(rc, re, extra, tables) \
+   if (use_pcre16) \
+     PCRE_PATTERN_TO_HOST_BYTE_ORDER16(rc, re, extra, tables); \
+   else \
+     PCRE_PATTERN_TO_HOST_BYTE_ORDER8(rc, re, extra, tables)
+ #define PCRE_PRINTINT(re, outfile, debug_lengths) \
+   if (use_pcre16) \
+     PCRE_PRINTINT16(re, outfile, debug_lengths); \
+   else \
+     PCRE_PRINTINT8(re, outfile, debug_lengths)
+ #define PCRE_STUDY(extra, re, options, error) \
+   if (use_pcre16) \
+     PCRE_STUDY16(extra, re, options, error); \
+   else \
+     PCRE_STUDY8(extra, re, options, error)
+ /* ----- Only 8-bit mode is supported ----- */
+ #elif defined SUPPORT_PCRE8
+ #define CHAR_SIZE                 1
+ #define PCHARS                    PCHARS8
+ #define PCHARSV                   PCHARSV8
+ #define READ_CAPTURE_NAME         READ_CAPTURE_NAME8
+ #define SET_PCRE_CALLOUT          SET_PCRE_CALLOUT8
+ #define STRLEN                    STRLEN8
+ #define PCRE_ASSIGN_JIT_STACK     PCRE_ASSIGN_JIT_STACK8
+ #define PCRE_COMPILE              PCRE_COMPILE8
+ #define PCRE_CONFIG               pcre_config
+ #define PCRE_COPY_NAMED_SUBSTRING PCRE_COPY_NAMED_SUBSTRING8
+ #define PCRE_COPY_SUBSTRING       PCRE_COPY_SUBSTRING8
+ #define PCRE_DFA_EXEC             PCRE_DFA_EXEC8
+ #define PCRE_EXEC                 PCRE_EXEC8
+ #define PCRE_FREE_STUDY           PCRE_FREE_STUDY8
+ #define PCRE_FREE_SUBSTRING       PCRE_FREE_SUBSTRING8
+ #define PCRE_FREE_SUBSTRING_LIST  PCRE_FREE_SUBSTRING_LIST8
+ #define PCRE_GET_NAMED_SUBSTRING  PCRE_GET_NAMED_SUBSTRING8
+ #define PCRE_GET_STRINGNUMBER     PCRE_GET_STRINGNUMBER8
+ #define PCRE_GET_SUBSTRING        PCRE_GET_SUBSTRING8
+ #define PCRE_GET_SUBSTRING_LIST   PCRE_GET_SUBSTRING_LIST8
+ #define PCRE_JIT_STACK_ALLOC      PCRE_JIT_STACK_ALLOC8
+ #define PCRE_JIT_STACK_FREE       PCRE_JIT_STACK_FREE8
+ #define PCRE_MAKETABLES           pcre_maketables()
+ #define PCRE_PATTERN_TO_HOST_BYTE_ORDER PCRE_PATTERN_TO_HOST_BYTE_ORDER8
+ #define PCRE_PRINTINT             PCRE_PRINTINT8
+ #define PCRE_STUDY                PCRE_STUDY8
+ /* ----- Only 16-bit mode is supported ----- */
+ #else
+ #define CHAR_SIZE                 2
+ #define PCHARS                    PCHARS16
+ #define PCHARSV                   PCHARSV16
+ #define READ_CAPTURE_NAME         READ_CAPTURE_NAME16
+ #define SET_PCRE_CALLOUT          SET_PCRE_CALLOUT16
+ #define STRLEN                    STRLEN16
+ #define PCRE_ASSIGN_JIT_STACK     PCRE_ASSIGN_JIT_STACK16
+ #define PCRE_COMPILE              PCRE_COMPILE16
+ #define PCRE_CONFIG               pcre16_config
+ #define PCRE_COPY_NAMED_SUBSTRING PCRE_COPY_NAMED_SUBSTRING16
+ #define PCRE_COPY_SUBSTRING       PCRE_COPY_SUBSTRING16
+ #define PCRE_DFA_EXEC             PCRE_DFA_EXEC16
+ #define PCRE_EXEC                 PCRE_EXEC16
+ #define PCRE_FREE_STUDY           PCRE_FREE_STUDY16
+ #define PCRE_FREE_SUBSTRING       PCRE_FREE_SUBSTRING16
+ #define PCRE_FREE_SUBSTRING_LIST  PCRE_FREE_SUBSTRING_LIST16
+ #define PCRE_GET_NAMED_SUBSTRING  PCRE_GET_NAMED_SUBSTRING16
+ #define PCRE_GET_STRINGNUMBER     PCRE_GET_STRINGNUMBER16
+ #define PCRE_GET_SUBSTRING        PCRE_GET_SUBSTRING16
+ #define PCRE_GET_SUBSTRING_LIST   PCRE_GET_SUBSTRING_LIST16
+ #define PCRE_JIT_STACK_ALLOC      PCRE_JIT_STACK_ALLOC16
+ #define PCRE_JIT_STACK_FREE       PCRE_JIT_STACK_FREE16
+ #define PCRE_MAKETABLES           pcre16_maketables()
+ #define PCRE_PATTERN_TO_HOST_BYTE_ORDER PCRE_PATTERN_TO_HOST_BYTE_ORDER16
+ #define PCRE_PRINTINT             PCRE_PRINTINT16
+ #define PCRE_STUDY                PCRE_STUDY16
+ #endif
+ /* ----- End of mode-specific function call macros ----- */
+ /* Other parameters */
  #ifndef CLOCKS_PER_SEC
  #ifdef CLK_TCK
  #define CLOCKS_PER_SEC CLK_TCK
-Line 35 
 Makefile. */
+Line 599 
 Makefile. */
  #endif
  #endif
- #define LOOPREPEAT 50000
+ /* This is the default loop count for timing. */
+ #define LOOPREPEAT 500000
+ /* Static variables */
  static FILE *outfile;
  static int log_store = 0;
-Line 44 
 static int callout_count;
+Line 611 
 static int callout_count;
  static int callout_extra;
  static int callout_fail_count;
  static int callout_fail_id;
+ static int debug_lengths;
  static int first_callout;
- static int utf8;
+ static int locale_set = 0;
+ static int show_malloc;
+ static int use_utf;
  static size_t gotten_store;
+ static size_t first_gotten_store = 0;
+ static const unsigned char *last_callout_mark = NULL;
+ /* The buffers grow automatically if very long input lines are encountered. */
+ static int buffer_size = 50000;
+ static pcre_uint8 *buffer = NULL;
+ static pcre_uint8 *dbuffer = NULL;
+ static pcre_uint8 *pbuffer = NULL;
- static int utf8_table1[] = {
+ /* Another buffer is needed translation to 16-bit character strings. It will
-x0000007f, 0x000007ff, 0x0000ffff, 0x001fffff, 0x03ffffff, 0x7fffffff};
+ obtained and extended as required. */
- static int utf8_table2[] = {
+ #ifdef SUPPORT_PCRE16
-, 0xc0, 0xe0, 0xf0, 0xf8, 0xfc};
+ static int buffer16_size = 0;
+ static pcre_uint16 *buffer16 = NULL;
- static int utf8_table3[] = {
+ #ifdef SUPPORT_PCRE8
-xff, 0x1f, 0x0f, 0x07, 0x03, 0x01};
+ /* We need the table of operator lengths that is used for 16-bit compiling, in
+ order to swap bytes in a pattern for saving/reloading testing. Luckily, the
+ data is defined as a macro. However, we must ensure that LINK_SIZE is adjusted
+ appropriately for the 16-bit world. Just as a safety check, make sure that
+ COMPILE_PCRE16 is *not* set. */
+ #ifdef COMPILE_PCRE16
+ #error COMPILE_PCRE16 must not be set when compiling pcretest.c
+ #endif
- /*************************************************
+ #if LINK_SIZE == 2
- *         Print compiled regex                   *
+ #undef LINK_SIZE
- *************************************************/
+ #define LINK_SIZE 1
+ #elif LINK_SIZE == 3 || LINK_SIZE == 4
+ #undef LINK_SIZE
+ #define LINK_SIZE 2
+ #else
+ #error LINK_SIZE must be either 2, 3, or 4
+ #endif
- /* The code for doing this is held in a separate file that is also included in
+ #undef IMM2_SIZE
- pcre.c when it is compiled with the debug switch. It defines a function called
+ #define IMM2_SIZE 1
- print_internals(), which uses a table of opcode lengths defined by the macro
- OP_LENGTHS, whose name must be OP_lengths. */
- static uschar OP_lengths[] = { OP_LENGTHS };
+ #endif /* SUPPORT_PCRE8 */
- #include "printint.c"
+ static const pcre_uint16 OP_lengths16[] = { OP_LENGTHS };
+ #endif  /* SUPPORT_PCRE16 */
+ /* If we have 8-bit support, default use_pcre16 to false; if there is also
+-bit support, it can be changed by an option. If there is no 8-bit support,
+ there must be 16-bit support, so default it to 1. */
+ #ifdef SUPPORT_PCRE8
+ static int use_pcre16 = 0;
+ #else
+ static int use_pcre16 = 1;
+ #endif
- /*************************************************
+ /* Textual explanations for runtime error codes */
- *          Read number from string               *
- *************************************************/
- /* We don't use strtoul() because SunOS4 doesn't have it. Rather than mess
+ static const char *errtexts[] = {
- around with conditional compilation, just do the job by hand. It is only used
+   NULL,  /* 0 is no error */
- for unpicking the -o argument, so just keep it simple.
+   NULL,  /* NOMATCH is handled specially */
+   "NULL argument passed",
+   "bad option value",
+   "magic number missing",
+   "unknown opcode - pattern overwritten?",
+   "no more memory",
+   NULL,  /* never returned by pcre_exec() or pcre_dfa_exec() */
+   "match limit exceeded",
+   "callout error code",
+   NULL,  /* BADUTF8/16 is handled specially */
+   NULL,  /* BADUTF8/16 offset is handled specially */
+   NULL,  /* PARTIAL is handled specially */
+   "not used - internal error",
+   "internal error - pattern overwritten?",
+   "bad count value",
+   "item unsupported for DFA matching",
+   "backreference condition or recursion test not supported for DFA matching",
+   "match limit not supported for DFA matching",
+   "workspace size exceeded in DFA matching",
+   "too much recursion for DFA matching",
+   "recursion limit exceeded",
+   "not used - internal error",
+   "invalid combination of newline options",
+   "bad offset value",
+   NULL,  /* SHORTUTF8/16 is handled specially */
+   "nested recursion at the same subject position",
+   "JIT stack limit reached",
+   "pattern compiled in wrong mode: 8-bit/16-bit error"
+ };
- Arguments:
-   str           string to be converted
-   endptr        where to put the end pointer
- Returns:        the unsigned long
+ /*************************************************
+ *         Alternate character tables             *
+ *************************************************/
+ /* By default, the "tables" pointer when calling PCRE is set to NULL, thereby
+ using the default tables of the library. However, the T option can be used to
+ select alternate sets of tables, for different kinds of testing. Note also that
+ the L (locale) option also adjusts the tables. */
+ /* This is the set of tables distributed as default with PCRE. It recognizes
+ only ASCII characters. */
+ static const pcre_uint8 tables0[] = {
+ /* This table is a lower casing table. */
+,  1,  2,  3,  4,  5,  6,  7,
+,  9, 10, 11, 12, 13, 14, 15,
+, 17, 18, 19, 20, 21, 22, 23,
+, 25, 26, 27, 28, 29, 30, 31,
+, 33, 34, 35, 36, 37, 38, 39,
+, 41, 42, 43, 44, 45, 46, 47,
+, 49, 50, 51, 52, 53, 54, 55,
+, 57, 58, 59, 60, 61, 62, 63,
+, 97, 98, 99,100,101,102,103,
+,105,106,107,108,109,110,111,
+,113,114,115,116,117,118,119,
+,121,122, 91, 92, 93, 94, 95,
+, 97, 98, 99,100,101,102,103,
+,105,106,107,108,109,110,111,
+,113,114,115,116,117,118,119,
+,121,122,123,124,125,126,127,
+,129,130,131,132,133,134,135,
+,137,138,139,140,141,142,143,
+,145,146,147,148,149,150,151,
+,153,154,155,156,157,158,159,
+,161,162,163,164,165,166,167,
+,169,170,171,172,173,174,175,
+,177,178,179,180,181,182,183,
+,185,186,187,188,189,190,191,
+,193,194,195,196,197,198,199,
+,201,202,203,204,205,206,207,
+,209,210,211,212,213,214,215,
+,217,218,219,220,221,222,223,
+,225,226,227,228,229,230,231,
+,233,234,235,236,237,238,239,
+,241,242,243,244,245,246,247,
+,249,250,251,252,253,254,255,
+ /* This table is a case flipping table. */
+,  1,  2,  3,  4,  5,  6,  7,
+,  9, 10, 11, 12, 13, 14, 15,
+, 17, 18, 19, 20, 21, 22, 23,
+, 25, 26, 27, 28, 29, 30, 31,
+, 33, 34, 35, 36, 37, 38, 39,
+, 41, 42, 43, 44, 45, 46, 47,
+, 49, 50, 51, 52, 53, 54, 55,
+, 57, 58, 59, 60, 61, 62, 63,
+, 97, 98, 99,100,101,102,103,
+,105,106,107,108,109,110,111,
+,113,114,115,116,117,118,119,
+,121,122, 91, 92, 93, 94, 95,
+, 65, 66, 67, 68, 69, 70, 71,
+, 73, 74, 75, 76, 77, 78, 79,
+, 81, 82, 83, 84, 85, 86, 87,
+, 89, 90,123,124,125,126,127,
+,129,130,131,132,133,134,135,
+,137,138,139,140,141,142,143,
+,145,146,147,148,149,150,151,
+,153,154,155,156,157,158,159,
+,161,162,163,164,165,166,167,
+,169,170,171,172,173,174,175,
+,177,178,179,180,181,182,183,
+,185,186,187,188,189,190,191,
+,193,194,195,196,197,198,199,
+,201,202,203,204,205,206,207,
+,209,210,211,212,213,214,215,
+,217,218,219,220,221,222,223,
+,225,226,227,228,229,230,231,
+,233,234,235,236,237,238,239,
+,241,242,243,244,245,246,247,
+,249,250,251,252,253,254,255,
+ /* This table contains bit maps for various character classes. Each map is 32
+ bytes long and the bits run from the least significant end of each byte. The
+ classes that have their own maps are: space, xdigit, digit, upper, lower, word,
+ graph, print, punct, and cntrl. Other classes are built from combinations. */
+x00,0x3e,0x00,0x00,0x01,0x00,0x00,0x00,
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+x00,0x00,0x00,0x00,0x00,0x00,0xff,0x03,
+x7e,0x00,0x00,0x00,0x7e,0x00,0x00,0x00,
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+x00,0x00,0x00,0x00,0x00,0x00,0xff,0x03,
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+xfe,0xff,0xff,0x07,0x00,0x00,0x00,0x00,
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+x00,0x00,0x00,0x00,0xfe,0xff,0xff,0x07,
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+x00,0x00,0x00,0x00,0x00,0x00,0xff,0x03,
+xfe,0xff,0xff,0x87,0xfe,0xff,0xff,0x07,
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+x00,0x00,0x00,0x00,0xfe,0xff,0xff,0xff,
+xff,0xff,0xff,0xff,0xff,0xff,0xff,0x7f,
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+x00,0x00,0x00,0x00,0xff,0xff,0xff,0xff,
+xff,0xff,0xff,0xff,0xff,0xff,0xff,0x7f,
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+x00,0x00,0x00,0x00,0xfe,0xff,0x00,0xfc,
+x01,0x00,0x00,0xf8,0x01,0x00,0x00,0x78,
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+xff,0xff,0xff,0xff,0x00,0x00,0x00,0x00,
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ /* This table identifies various classes of character by individual bits:
+x01   white space character
+x02   letter
+x04   decimal digit
+x08   hexadecimal digit
+x10   alphanumeric or '_'
+x80   regular expression metacharacter or binary zero
  */
- static int
+x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*   0-  7 */
- get_value(unsigned char *str, unsigned char **endptr)
+x00,0x01,0x01,0x00,0x01,0x01,0x00,0x00, /*   8- 15 */
- {
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  16- 23 */
- int result = 0;
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  24- 31 */
- while(*str != 0 && isspace(*str)) str++;
+x01,0x00,0x00,0x00,0x80,0x00,0x00,0x00, /*    - '  */
- while (isdigit(*str)) result = result * 10 + (int)(*str++ - '0');
+x80,0x80,0x80,0x80,0x00,0x00,0x80,0x00, /*  ( - /  */
- *endptr = str;
+x1c,0x1c,0x1c,0x1c,0x1c,0x1c,0x1c,0x1c, /*  0 - 7  */
- return(result);
+x1c,0x1c,0x00,0x00,0x00,0x00,0x00,0x80, /*  8 - ?  */
- }
+x00,0x1a,0x1a,0x1a,0x1a,0x1a,0x1a,0x12, /*  @ - G  */
+x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /*  H - O  */
+x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /*  P - W  */
+x12,0x12,0x12,0x80,0x80,0x00,0x80,0x10, /*  X - _  */
+x00,0x1a,0x1a,0x1a,0x1a,0x1a,0x1a,0x12, /*  ` - g  */
+x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /*  h - o  */
+x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /*  p - w  */
+x12,0x12,0x12,0x80,0x80,0x00,0x00,0x00, /*  x -127 */
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 128-135 */
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 136-143 */
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 144-151 */
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 152-159 */
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 160-167 */
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 168-175 */
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 176-183 */
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 184-191 */
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 192-199 */
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 200-207 */
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 208-215 */
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 216-223 */
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 224-231 */
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 232-239 */
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 240-247 */
+x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};/* 248-255 */
+ /* This is a set of tables that came orginally from a Windows user. It seems to
+ be at least an approximation of ISO 8859. In particular, there are characters
+ greater than 128 that are marked as spaces, letters, etc. */
+ static const pcre_uint8 tables1[] = {
+,1,2,3,4,5,6,7,
+,9,10,11,12,13,14,15,
+,17,18,19,20,21,22,23,
+,25,26,27,28,29,30,31,
+,33,34,35,36,37,38,39,
+,41,42,43,44,45,46,47,
+,49,50,51,52,53,54,55,
+,57,58,59,60,61,62,63,
+,97,98,99,100,101,102,103,
+,105,106,107,108,109,110,111,
+,113,114,115,116,117,118,119,
+,121,122,91,92,93,94,95,
+,97,98,99,100,101,102,103,
+,105,106,107,108,109,110,111,
+,113,114,115,116,117,118,119,
+,121,122,123,124,125,126,127,
+,129,130,131,132,133,134,135,
+,137,138,139,140,141,142,143,
+,145,146,147,148,149,150,151,
+,153,154,155,156,157,158,159,
+,161,162,163,164,165,166,167,
+,169,170,171,172,173,174,175,
+,177,178,179,180,181,182,183,
+,185,186,187,188,189,190,191,
+,225,226,227,228,229,230,231,
+,233,234,235,236,237,238,239,
+,241,242,243,244,245,246,215,
+,249,250,251,252,253,254,223,
+,225,226,227,228,229,230,231,
+,233,234,235,236,237,238,239,
+,241,242,243,244,245,246,247,
+,249,250,251,252,253,254,255,
+,1,2,3,4,5,6,7,
+,9,10,11,12,13,14,15,
+,17,18,19,20,21,22,23,
+,25,26,27,28,29,30,31,
+,33,34,35,36,37,38,39,
+,41,42,43,44,45,46,47,
+,49,50,51,52,53,54,55,
+,57,58,59,60,61,62,63,
+,97,98,99,100,101,102,103,
+,105,106,107,108,109,110,111,
+,113,114,115,116,117,118,119,
+,121,122,91,92,93,94,95,
+,65,66,67,68,69,70,71,
+,73,74,75,76,77,78,79,
+,81,82,83,84,85,86,87,
+,89,90,123,124,125,126,127,
+,129,130,131,132,133,134,135,
+,137,138,139,140,141,142,143,
+,145,146,147,148,149,150,151,
+,153,154,155,156,157,158,159,
+,161,162,163,164,165,166,167,
+,169,170,171,172,173,174,175,
+,177,178,179,180,181,182,183,
+,185,186,187,188,189,190,191,
+,225,226,227,228,229,230,231,
+,233,234,235,236,237,238,239,
+,241,242,243,244,245,246,215,
+,249,250,251,252,253,254,223,
+,193,194,195,196,197,198,199,
+,201,202,203,204,205,206,207,
+,209,210,211,212,213,214,247,
+,217,218,219,220,221,222,255,
+,62,0,0,1,0,0,0,
+,0,0,0,0,0,0,0,
+,0,0,0,1,0,0,0,
+,0,0,0,0,0,0,0,
+,0,0,0,0,0,255,3,
+,0,0,0,126,0,0,0,
+,0,0,0,0,0,0,0,
+,0,0,0,0,0,0,0,
+,0,0,0,0,0,255,3,
+,0,0,0,0,0,0,0,
+,0,0,0,0,0,12,2,
+,0,0,0,0,0,0,0,
+,0,0,0,0,0,0,0,
+,255,255,7,0,0,0,0,
+,0,0,0,0,0,0,0,
+,255,127,127,0,0,0,0,
+,0,0,0,0,0,0,0,
+,0,0,0,254,255,255,7,
+,0,0,0,0,4,32,4,
+,0,0,128,255,255,127,255,
+,0,0,0,0,0,255,3,
+,255,255,135,254,255,255,7,
+,0,0,0,0,4,44,6,
+,255,127,255,255,255,127,255,
+,0,0,0,254,255,255,255,
+,255,255,255,255,255,255,127,
+,0,0,0,254,255,255,255,
+,255,255,255,255,255,255,255,
+,2,0,0,255,255,255,255,
+,255,255,255,255,255,255,127,
+,0,0,0,255,255,255,255,
+,255,255,255,255,255,255,255,
+,0,0,0,254,255,0,252,
+,0,0,248,1,0,0,120,
+,0,0,0,254,255,255,255,
+,0,128,0,0,0,128,0,
+,255,255,255,0,0,0,0,
+,0,0,0,0,0,0,128,
+,255,255,255,0,0,0,0,
+,0,0,0,0,0,0,0,
+,0,0,0,0,0,0,0,
+,1,1,0,1,1,0,0,
+,0,0,0,0,0,0,0,
+,0,0,0,0,0,0,0,
+,0,0,0,128,0,0,0,
+,128,128,128,0,0,128,0,
+,28,28,28,28,28,28,28,
+,28,0,0,0,0,0,128,
+,26,26,26,26,26,26,18,
+,18,18,18,18,18,18,18,
+,18,18,18,18,18,18,18,
+,18,18,128,128,0,128,16,
+,26,26,26,26,26,26,18,
+,18,18,18,18,18,18,18,
+,18,18,18,18,18,18,18,
+,18,18,128,128,0,0,0,
+,0,0,0,0,1,0,0,
+,0,0,0,0,0,0,0,
+,0,0,0,0,0,0,0,
+,0,0,0,0,0,0,0,
+,0,0,0,0,0,0,0,
+,0,18,0,0,0,0,0,
+,0,20,20,0,18,0,0,
+,20,18,0,0,0,0,0,
+,18,18,18,18,18,18,18,
+,18,18,18,18,18,18,18,
+,18,18,18,18,18,18,0,
+,18,18,18,18,18,18,18,
+,18,18,18,18,18,18,18,
+,18,18,18,18,18,18,18,
+,18,18,18,18,18,18,0,
+,18,18,18,18,18,18,18
+ };
+ #ifndef HAVE_STRERROR
  /*************************************************
- *       Convert character value to UTF-8         *
+ *     Provide strerror() for non-ANSI libraries  *
  *************************************************/
- /* This function takes an integer value in the range 0 - 0x7fffffff
+ /* Some old-fashioned systems still around (e.g. SunOS4) don't have strerror()
- and encodes it as a UTF-8 character in 0 to 6 bytes.
+ in their libraries, but can provide the same facility by this simple
+ alternative function. */
- Arguments:
-   cvalue     the character value
-   buffer     pointer to buffer for result - at least 6 bytes long
- Returns:     number of characters placed in the buffer
+ extern int   sys_nerr;
-              -1 if input character is negative
+ extern char *sys_errlist[];
-if input character is positive but too big (only when
-              int is longer than 32 bits)
- */
- static int
+ char *
- ord2utf8(int cvalue, unsigned char *buffer)
+ strerror(int n)
  {
- register int i, j;
+ if (n < 0 || n >= sys_nerr) return "unknown error number";
- for (i = 0; i < sizeof(utf8_table1)/sizeof(int); i++)
+ return sys_errlist[n];
-   if (cvalue <= utf8_table1[i]) break;
+ }
- if (i >= sizeof(utf8_table1)/sizeof(int)) return 0;
+ #endif /* HAVE_STRERROR */
- if (cvalue < 0) return -1;
- buffer += i;
- for (j = i; j > 0; j--)
+ /*************************************************
-  {
+ *         JIT memory callback                    *
-  *buffer-- = 0x80 | (cvalue & 0x3f);
+ *************************************************/
-  cvalue >>= 6;
-  }
+ static pcre_jit_stack* jit_callback(void *arg)
- *buffer = utf8_table2[i] | cvalue;
+ {
- return i + 1;
+ return (pcre_jit_stack *)arg;
  }
+ #if !defined NOUTF || defined SUPPORT_PCRE16
  /*************************************************
  *            Convert UTF-8 string to value       *
  *************************************************/
-Line 148 
 return i + 1;
+Line 1076 
 return i + 1;
  and returns the value of the character.
  Argument:
-   buffer   a pointer to the byte vector
+   utf8bytes   a pointer to the byte vector
-   vptr     a pointer to an int to receive the value
+   vptr        a pointer to an int to receive the value
- Returns:   >  0 => the number of bytes consumed
+ Returns:      >  0 => the number of bytes consumed
-            -6 to 0 => malformed UTF-8 character at offset = (-return)
+               -6 to 0 => malformed UTF-8 character at offset = (-return)
  */
- int
+ static int
- utf82ord(unsigned char *buffer, int *vptr)
+ utf82ord(pcre_uint8 *utf8bytes, int *vptr)
  {
- int c = *buffer++;
+ int c = *utf8bytes++;
  int d = c;
  int i, j, s;
-Line 178 
 d = (c & utf8_table3[i]) << s;
+Line 1106 
 d = (c & utf8_table3[i]) << s;
  for (j = 0; j < i; j++)
    {
-   c = *buffer++;
+   c = *utf8bytes++;
    if ((c & 0xc0) != 0x80) return -(j+1);
    s -= 6;
    d |= (c & 0x3f) << s;
-Line 186 
 for (j = 0; j < i; j++)
+Line 1114 
 for (j = 0; j < i; j++)
  /* Check that encoding was the correct unique one */
- for (j = 0; j < sizeof(utf8_table1)/sizeof(int); j++)
+ for (j = 0; j < utf8_table1_size; j++)
    if (d <= utf8_table1[j]) break;
  if (j != i) return -(i+1);
-Line 195 
 if (j != i) return -(i+1);
+Line 1123 
 if (j != i) return -(i+1);
  *vptr = d;
  return i+1;
  }
+ #endif /* NOUTF || SUPPORT_PCRE16 */
+ #if !defined NOUTF || defined SUPPORT_PCRE16
  /*************************************************
- *             Print character string             *
+ *       Convert character value to UTF-8         *
  *************************************************/
- /* Character string printing function. Must handle UTF-8 strings in utf8
+ /* This function takes an integer value in the range 0 - 0x7fffffff
- mode. Yields number of characters printed. If handed a NULL file, just counts
+ and encodes it as a UTF-8 character in 0 to 6 bytes.
- chars without printing. */
+ Arguments:
+   cvalue     the character value
+   utf8bytes  pointer to buffer for result - at least 6 bytes long
+ Returns:     number of characters placed in the buffer
+ */
- static int pchars(unsigned char *p, int length, FILE *f)
+ static int
+ ord2utf8(int cvalue, pcre_uint8 *utf8bytes)
  {
- int c;
+ register int i, j;
- int yield = 0;
+ for (i = 0; i < utf8_table1_size; i++)
+   if (cvalue <= utf8_table1[i]) break;
+ utf8bytes += i;
+ for (j = i; j > 0; j--)
+  {
+  *utf8bytes-- = 0x80 | (cvalue & 0x3f);
+  cvalue >>= 6;
+  }
+ *utf8bytes = utf8_table2[i] | cvalue;
+ return i + 1;
+ }
+ #endif
- while (length-- > 0)
-   {
-   if (utf8)
-     {
-     int rc = utf82ord(p, &c);
-     if (rc > 0 && rc <= length + 1)   /* Mustn't run over the end */
+ #ifdef SUPPORT_PCRE16
-       {
+ /*************************************************
-       length -= rc - 1;
+ *         Convert a string to 16-bit             *
-       p += rc;
+ *************************************************/
-       if (c < 256 && isprint(c))
-         {
+ /* In non-UTF mode, the space needed for a 16-bit string is exactly double the
-         if (f != NULL) fprintf(f, "%c", c);
+-bit size. For a UTF-8 string, the size needed for UTF-16 is no more than
-         yield++;
+ double, because up to 0xffff uses no more than 3 bytes in UTF-8 but possibly 4
-         }
+ in UTF-16. Higher values use 4 bytes in UTF-8 and up to 4 bytes in UTF-16. The
-       else
+ result is always left in buffer16.
-         {
-         int n;
+ Note that this function does not object to surrogate values. This is
-         if (f != NULL) fprintf(f, "\\x{%02x}%n", c, &n);
+ deliberate; it makes it possible to construct UTF-16 strings that are invalid,
-         yield += n;
+ for the purpose of testing that they are correctly faulted.
-         }
-       continue;
+ Patterns to be converted are either plain ASCII or UTF-8; data lines are always
-       }
+ in UTF-8 so that values greater than 255 can be handled.
-     }
+ Arguments:
+   data       TRUE if converting a data line; FALSE for a regex
+   p          points to a byte string
+   utf        true if UTF-8 (to be converted to UTF-16)
+   len        number of bytes in the string (excluding trailing zero)
+ Returns:     number of 16-bit data items used (excluding trailing zero)
+              OR -1 if a UTF-8 string is malformed
+              OR -2 if a value > 0x10ffff is encountered
+              OR -3 if a value > 0xffff is encountered when not in UTF mode
+ */
-    /* Not UTF-8, or malformed UTF-8  */
+ static int
+ to16(int data, pcre_uint8 *p, int utf, int len)
+ {
+ pcre_uint16 *pp;
-   if (isprint(c = *(p++)))
+ if (buffer16_size < 2*len + 2)
+   {
+   if (buffer16 != NULL) free(buffer16);
+   buffer16_size = 2*len + 2;
+   buffer16 = (pcre_uint16 *)malloc(buffer16_size);
+   if (buffer16 == NULL)
      {
-     if (f != NULL) fprintf(f, "%c", c);
+     fprintf(stderr, "pcretest: malloc(%d) failed for buffer16\n", buffer16_size);
-     yield++;
+     exit(1);
      }
-   else
+   }
+ pp = buffer16;
+ if (!utf && !data)
+   {
+   while (len-- > 0) *pp++ = *p++;
+   }
+ else
+   {
+   int c = 0;
+   while (len > 0)
      {
-     if (f != NULL) fprintf(f, "\\x%02x", c);
+     int chlen = utf82ord(p, &c);
-     yield += 4;
+     if (chlen <= 0) return -1;
+     if (c > 0x10ffff) return -2;
+     p += chlen;
+     len -= chlen;
+     if (c < 0x10000) *pp++ = c; else
+       {
+       if (!utf) return -3;
+       c -= 0x10000;
+       *pp++ = 0xD800 | (c >> 10);
+       *pp++ = 0xDC00 | (c & 0x3ff);
+       }
      }
    }
- return yield;
+ *pp = 0;
+ return pp - buffer16;
  }
+ #endif
  /*************************************************
- *              Callout function                  *
+ *        Read or extend an input line            *
  *************************************************/
- /* Called from PCRE as a result of the (?C) item. We print out where we are in
+ /* Input lines are read into buffer, but both patterns and data lines can be
- the match. Yield zero unless more callouts than the fail count, or the callout
+ continued over multiple input lines. In addition, if the buffer fills up, we
- data is not zero. */
+ want to automatically expand it so as to be able to handle extremely large
+ lines that are needed for certain stress tests. When the input buffer is
+ expanded, the other two buffers must also be expanded likewise, and the
+ contents of pbuffer, which are a copy of the input for callouts, must be
+ preserved (for when expansion happens for a data line). This is not the most
+ optimal way of handling this, but hey, this is just a test program!
- static int callout(pcre_callout_block *cb)
+ Arguments:
+   f            the file to read
+   start        where in buffer to start (this *must* be within buffer)
+   prompt       for stdin or readline()
+ Returns:       pointer to the start of new data
+                could be a copy of start, or could be moved
+                NULL if no data read and EOF reached
+ */
+ static pcre_uint8 *
+ extend_inputline(FILE *f, pcre_uint8 *start, const char *prompt)
  {
- FILE *f = (first_callout | callout_extra)? outfile : NULL;
+ pcre_uint8 *here = start;
- int i, pre_start, post_start;
- if (callout_extra)
+ for (;;)
    {
-   int i;
+   size_t rlen = (size_t)(buffer_size - (here - buffer));
-   fprintf(f, "Callout %d: last capture = %d\n",
-     cb->callout_number, cb->capture_last);
-   for (i = 0; i < cb->capture_top * 2; i += 2)
+   if (rlen > 1000)
      {
-     if (cb->offset_vector[i] < 0)
+     int dlen;
-       fprintf(f, "%2d: <unset>\n", i/2);
-     else
-       {
-       fprintf(f, "%2d: ", i/2);
-       (void)pchars((unsigned char *)cb->subject + cb->offset_vector[i],
-         cb->offset_vector[i+1] - cb->offset_vector[i], f);
-       fprintf(f, "\n");
-       }
-     }
-   }
- /* Re-print the subject in canonical form, the first time or if giving full
+     /* If libreadline support is required, use readline() to read a line if the
- datails. On subsequent calls in the same match, we use pchars just to find the
+     input is a terminal. Note that readline() removes the trailing newline, so
- printed lengths of the substrings. */
+     we must put it back again, to be compatible with fgets(). */
- if (f != NULL) fprintf(f, "--->");
+ #ifdef SUPPORT_LIBREADLINE
+     if (isatty(fileno(f)))
+       {
+       size_t len;
+       char *s = readline(prompt);
+       if (s == NULL) return (here == start)? NULL : start;
+       len = strlen(s);
+       if (len > 0) add_history(s);
+       if (len > rlen - 1) len = rlen - 1;
+       memcpy(here, s, len);
+       here[len] = '\n';
+       here[len+1] = 0;
+       free(s);
+       }
+     else
+ #endif
- pre_start = pchars((unsigned char *)cb->subject, cb->start_match, f);
+     /* Read the next line by normal means, prompting if the file is stdin. */
- post_start = pchars((unsigned char *)(cb->subject + cb->start_match),
-   cb->current_position - cb->start_match, f);
- (void)pchars((unsigned char *)(cb->subject + cb->current_position),
+       {
-   cb->subject_length - cb->current_position, f);
+       if (f == stdin) printf("%s", prompt);
+       if (fgets((char *)here, rlen,  f) == NULL)
+         return (here == start)? NULL : start;
+       }
- if (f != NULL) fprintf(f, "\n");
+     dlen = (int)strlen((char *)here);
+     if (dlen > 0 && here[dlen - 1] == '\n') return start;
+     here += dlen;
+     }
- /* Always print appropriate indicators, with callout number if not already
+   else
- shown */
+     {
+     int new_buffer_size = 2*buffer_size;
+     pcre_uint8 *new_buffer = (pcre_uint8 *)malloc(new_buffer_size);
+     pcre_uint8 *new_dbuffer = (pcre_uint8 *)malloc(new_buffer_size);
+     pcre_uint8 *new_pbuffer = (pcre_uint8 *)malloc(new_buffer_size);
- if (callout_extra) fprintf(outfile, "    ");
+     if (new_buffer == NULL || new_dbuffer == NULL || new_pbuffer == NULL)
-   else fprintf(outfile, "%3d ", cb->callout_number);
+       {
+       fprintf(stderr, "pcretest: malloc(%d) failed\n", new_buffer_size);
+       exit(1);
+       }
- for (i = 0; i < pre_start; i++) fprintf(outfile, " ");
+     memcpy(new_buffer, buffer, buffer_size);
- fprintf(outfile, "^");
+     memcpy(new_pbuffer, pbuffer, buffer_size);
- if (post_start > 0)
+     buffer_size = new_buffer_size;
-   {
-   for (i = 0; i < post_start - 1; i++) fprintf(outfile, " ");
-   fprintf(outfile, "^");
-   }
- fprintf(outfile, "\n");
+     start = new_buffer + (start - buffer);
+     here = new_buffer + (here - buffer);
- first_callout = 0;
+     free(buffer);
+     free(dbuffer);
+     free(pbuffer);
- if ((int)(cb->callout_data) != 0)
+     buffer = new_buffer;
-   {
+     dbuffer = new_dbuffer;
-   fprintf(outfile, "Callout data = %d\n", (int)(cb->callout_data));
+     pbuffer = new_pbuffer;
-   return (int)(cb->callout_data);
+     }
    }
- return (cb->callout_number != callout_fail_id)? 0 :
+ return NULL;  /* Control never gets here */
-        (++callout_count >= callout_fail_count)? 1 : 0;
  }
  /*************************************************
- *            Local malloc function               *
+ *          Read number from string               *
  *************************************************/
- /* Alternative malloc function, to test functionality and show the size of the
+ /* We don't use strtoul() because SunOS4 doesn't have it. Rather than mess
- compiled re. */
+ around with conditional compilation, just do the job by hand. It is only used
+ for unpicking arguments, so just keep it simple.
- static void *new_malloc(size_t size)
+ Arguments:
+   str           string to be converted
+   endptr        where to put the end pointer
+ Returns:        the unsigned long
+ */
+ static int
+ get_value(pcre_uint8 *str, pcre_uint8 **endptr)
  {
- gotten_store = size;
+ int result = 0;
- return malloc(size);
+ while(*str != 0 && isspace(*str)) str++;
+ while (isdigit(*str)) result = result * 10 + (int)(*str++ - '0');
+ *endptr = str;
+ return(result);
  }
  /*************************************************
- *          Call pcre_fullinfo()                  *
+ *             Print one character                *
  *************************************************/
- /* Get one piece of information from the pcre_fullinfo() function */
+ /* Print a single character either literally, or as a hex escape. */
- static void new_info(pcre *re, pcre_extra *study, int option, void *ptr)
+ static int pchar(int c, FILE *f)
  {
- int rc;
+ if (PRINTOK(c))
- if ((rc = pcre_fullinfo(re, study, option, ptr)) < 0)
+   {
-   fprintf(outfile, "Error %d from pcre_fullinfo(%d)\n", rc, option);
+   if (f != NULL) fprintf(f, "%c", c);
+   return 1;
+   }
+ if (c < 0x100)
+   {
+   if (use_utf)
+     {
+     if (f != NULL) fprintf(f, "\\x{%02x}", c);
+     return 6;
+     }
+   else
+     {
+     if (f != NULL) fprintf(f, "\\x%02x", c);
+     return 4;
+     }
+   }
+ if (f != NULL) fprintf(f, "\\x{%02x}", c);
+ return (c <= 0x000000ff)? 6 :
+        (c <= 0x00000fff)? 7 :
+        (c <= 0x0000ffff)? 8 :
+        (c <= 0x000fffff)? 9 : 10;
  }
+ #ifdef SUPPORT_PCRE8
  /*************************************************
- *                Main Program                    *
+ *         Print 8-bit character string           *
  *************************************************/
- /* Read lines from named file or stdin and write to named file or stdout; lines
+ /* Must handle UTF-8 strings in utf8 mode. Yields number of characters printed.
- consist of a regular expression, in delimiters and optionally followed by
+ If handed a NULL file, just counts chars without printing. */
- options, followed by a set of test data, terminated by an empty line. */
- int main(int argc, char **argv)
+ static int pchars(pcre_uint8 *p, int length, FILE *f)
  {
- FILE *infile = stdin;
+ int c = 0;
- int options = 0;
+ int yield = 0;
- int study_options = 0;
- int op = 1;
+ if (length < 0)
- int timeit = 0;
+   length = strlen((char *)p);
- int showinfo = 0;
- int showstore = 0;
+ while (length-- > 0)
+   {
+ #if !defined NOUTF
+   if (use_utf)
+     {
+     int rc = utf82ord(p, &c);
+     if (rc > 0 && rc <= length + 1)   /* Mustn't run over the end */
+       {
+       length -= rc - 1;
+       p += rc;
+       yield += pchar(c, f);
+       continue;
+       }
+     }
+ #endif
+   c = *p++;
+   yield += pchar(c, f);
+   }
+ return yield;
+ }
+ #endif
+ #ifdef SUPPORT_PCRE16
+ /*************************************************
+ *    Find length of 0-terminated 16-bit string   *
+ *************************************************/
+ static int strlen16(PCRE_SPTR16 p)
+ {
+ int len = 0;
+ while (*p++ != 0) len++;
+ return len;
+ }
+ #endif  /* SUPPORT_PCRE16 */
+ #ifdef SUPPORT_PCRE16
+ /*************************************************
+ *           Print 16-bit character string        *
+ *************************************************/
+ /* Must handle UTF-16 strings in utf mode. Yields number of characters printed.
+ If handed a NULL file, just counts chars without printing. */
+ static int pchars16(PCRE_SPTR16 p, int length, FILE *f)
+ {
+ int yield = 0;
+ if (length < 0)
+   length = strlen16(p);
+ while (length-- > 0)
+   {
+   int c = *p++ & 0xffff;
+ #if !defined NOUTF
+   if (use_utf && c >= 0xD800 && c < 0xDC00 && length > 0)
+     {
+     int d = *p & 0xffff;
+     if (d >= 0xDC00 && d < 0xDFFF)
+       {
+       c = ((c & 0x3ff) << 10) + (d & 0x3ff) + 0x10000;
+       length--;
+       p++;
+       }
+     }
+ #endif
+   yield += pchar(c, f);
+   }
+ return yield;
+ }
+ #endif  /* SUPPORT_PCRE16 */
+ #ifdef SUPPORT_PCRE8
+ /*************************************************
+ *     Read a capture name (8-bit) and check it   *
+ *************************************************/
+ static pcre_uint8 *
+ read_capture_name8(pcre_uint8 *p, pcre_uint8 **pp, pcre *re)
+ {
+ pcre_uint8 *npp = *pp;
+ while (isalnum(*p)) *npp++ = *p++;
+ *npp++ = 0;
+ *npp = 0;
+ if (pcre_get_stringnumber(re, (char *)(*pp)) < 0)
+   {
+   fprintf(outfile, "no parentheses with name \"");
+   PCHARSV(*pp, 0, -1, outfile);
+   fprintf(outfile, "\"\n");
+   }
+ *pp = npp;
+ return p;
+ }
+ #endif  /* SUPPORT_PCRE8 */
+ #ifdef SUPPORT_PCRE16
+ /*************************************************
+ *     Read a capture name (16-bit) and check it  *
+ *************************************************/
+ /* Note that the text being read is 8-bit. */
+ static pcre_uint8 *
+ read_capture_name16(pcre_uint8 *p, pcre_uint16 **pp, pcre *re)
+ {
+ pcre_uint16 *npp = *pp;
+ while (isalnum(*p)) *npp++ = *p++;
+ *npp++ = 0;
+ *npp = 0;
+ if (pcre16_get_stringnumber((pcre16 *)re, (PCRE_SPTR16)(*pp)) < 0)
+   {
+   fprintf(outfile, "no parentheses with name \"");
+   PCHARSV(*pp, 0, -1, outfile);
+   fprintf(outfile, "\"\n");
+   }
+ *pp = npp;
+ return p;
+ }
+ #endif  /* SUPPORT_PCRE16 */
+ /*************************************************
+ *              Callout function                  *
+ *************************************************/
+ /* Called from PCRE as a result of the (?C) item. We print out where we are in
+ the match. Yield zero unless more callouts than the fail count, or the callout
+ data is not zero. */
+ static int callout(pcre_callout_block *cb)
+ {
+ FILE *f = (first_callout | callout_extra)? outfile : NULL;
+ int i, pre_start, post_start, subject_length;
+ if (callout_extra)
+   {
+   fprintf(f, "Callout %d: last capture = %d\n",
+     cb->callout_number, cb->capture_last);
+   for (i = 0; i < cb->capture_top * 2; i += 2)
+     {
+     if (cb->offset_vector[i] < 0)
+       fprintf(f, "%2d: <unset>\n", i/2);
+     else
+       {
+       fprintf(f, "%2d: ", i/2);
+       PCHARSV(cb->subject, cb->offset_vector[i],
+         cb->offset_vector[i+1] - cb->offset_vector[i], f);
+       fprintf(f, "\n");
+       }
+     }
+   }
+ /* Re-print the subject in canonical form, the first time or if giving full
+ datails. On subsequent calls in the same match, we use pchars just to find the
+ printed lengths of the substrings. */
+ if (f != NULL) fprintf(f, "--->");
+ PCHARS(pre_start, cb->subject, 0, cb->start_match, f);
+ PCHARS(post_start, cb->subject, cb->start_match,
+   cb->current_position - cb->start_match, f);
+ PCHARS(subject_length, cb->subject, 0, cb->subject_length, NULL);
+ PCHARSV(cb->subject, cb->current_position,
+   cb->subject_length - cb->current_position, f);
+ if (f != NULL) fprintf(f, "\n");
+ /* Always print appropriate indicators, with callout number if not already
+ shown. For automatic callouts, show the pattern offset. */
+ if (cb->callout_number == 255)
+   {
+   fprintf(outfile, "%+3d ", cb->pattern_position);
+   if (cb->pattern_position > 99) fprintf(outfile, "\n    ");
+   }
+ else
+   {
+   if (callout_extra) fprintf(outfile, "    ");
+     else fprintf(outfile, "%3d ", cb->callout_number);
+   }
+ for (i = 0; i < pre_start; i++) fprintf(outfile, " ");
+ fprintf(outfile, "^");
+ if (post_start > 0)
+   {
+   for (i = 0; i < post_start - 1; i++) fprintf(outfile, " ");
+   fprintf(outfile, "^");
+   }
+ for (i = 0; i < subject_length - pre_start - post_start + 4; i++)
+   fprintf(outfile, " ");
+ fprintf(outfile, "%.*s", (cb->next_item_length == 0)? 1 : cb->next_item_length,
+   pbuffer + cb->pattern_position);
+ fprintf(outfile, "\n");
+ first_callout = 0;
+ if (cb->mark != last_callout_mark)
+   {
+   if (cb->mark == NULL)
+     fprintf(outfile, "Latest Mark: <unset>\n");
+   else
+     {
+     fprintf(outfile, "Latest Mark: ");
+     PCHARSV(cb->mark, 0, -1, outfile);
+     putc('\n', outfile);
+     }
+   last_callout_mark = cb->mark;
+   }
+ if (cb->callout_data != NULL)
+   {
+   int callout_data = *((int *)(cb->callout_data));
+   if (callout_data != 0)
+     {
+     fprintf(outfile, "Callout data = %d\n", callout_data);
+     return callout_data;
+     }
+   }
+ return (cb->callout_number != callout_fail_id)? 0 :
+        (++callout_count >= callout_fail_count)? 1 : 0;
+ }
+ /*************************************************
+ *            Local malloc functions              *
+ *************************************************/
+ /* Alternative malloc function, to test functionality and save the size of a
+ compiled re, which is the first store request that pcre_compile() makes. The
+ show_malloc variable is set only during matching. */
+ static void *new_malloc(size_t size)
+ {
+ void *block = malloc(size);
+ gotten_store = size;
+ if (first_gotten_store == 0) first_gotten_store = size;
+ if (show_malloc)
+   fprintf(outfile, "malloc       %3d %p\n", (int)size, block);
+ return block;
+ }
+ static void new_free(void *block)
+ {
+ if (show_malloc)
+   fprintf(outfile, "free             %p\n", block);
+ free(block);
+ }
+ /* For recursion malloc/free, to test stacking calls */
+ static void *stack_malloc(size_t size)
+ {
+ void *block = malloc(size);
+ if (show_malloc)
+   fprintf(outfile, "stack_malloc %3d %p\n", (int)size, block);
+ return block;
+ }
+ static void stack_free(void *block)
+ {
+ if (show_malloc)
+   fprintf(outfile, "stack_free       %p\n", block);
+ free(block);
+ }
+ /*************************************************
+ *          Call pcre_fullinfo()                  *
+ *************************************************/
+ /* Get one piece of information from the pcre_fullinfo() function. When only
+ one of 8-bit or 16-bit is supported, use_pcre16 should always have the correct
+ value, but the code is defensive.
+ Arguments:
+   re        compiled regex
+   study     study data
+   option    PCRE_INFO_xxx option
+   ptr       where to put the data
+ Returns:    0 when OK, < 0 on error
+ */
+ static int
+ new_info(pcre *re, pcre_extra *study, int option, void *ptr)
+ {
+ int rc;
+ if (use_pcre16)
+ #ifdef SUPPORT_PCRE16
+   rc = pcre16_fullinfo((pcre16 *)re, (pcre16_extra *)study, option, ptr);
+ #else
+   rc = PCRE_ERROR_BADMODE;
+ #endif
+ else
+ #ifdef SUPPORT_PCRE8
+   rc = pcre_fullinfo(re, study, option, ptr);
+ #else
+   rc = PCRE_ERROR_BADMODE;
+ #endif
+ if (rc < 0)
+   {
+   fprintf(outfile, "Error %d from pcre%s_fullinfo(%d)\n", rc,
+     use_pcre16? "16" : "", option);
+   if (rc == PCRE_ERROR_BADMODE)
+     fprintf(outfile, "Running in %s-bit mode but pattern was compiled in "
+       "%s-bit mode\n", use_pcre16? "16":"8", use_pcre16? "8":"16");
+   }
+ return rc;
+ }
+ /*************************************************
+ *             Swap byte functions                *
+ *************************************************/
+ /* The following functions swap the bytes of a pcre_uint16 and pcre_uint32
+ value, respectively.
+ Arguments:
+   value        any number
+ Returns:       the byte swapped value
+ */
+ static pcre_uint32
+ swap_uint32(pcre_uint32 value)
+ {
+ return ((value & 0x000000ff) << 24) |
+        ((value & 0x0000ff00) <<  8) |
+        ((value & 0x00ff0000) >>  8) |
+        (value >> 24);
+ }
+ static pcre_uint16
+ swap_uint16(pcre_uint16 value)
+ {
+ return (value >> 8) | (value << 8);
+ }
+ /*************************************************
+ *        Flip bytes in a compiled pattern        *
+ *************************************************/
+ /* This function is called if the 'F' option was present on a pattern that is
+ to be written to a file. We flip the bytes of all the integer fields in the
+ regex data block and the study block. In 16-bit mode this also flips relevant
+ bytes in the pattern itself. This is to make it possible to test PCRE's
+ ability to reload byte-flipped patterns, e.g. those compiled on a different
+ architecture. */
+ static void
+ regexflip(pcre *ere, pcre_extra *extra)
+ {
+ REAL_PCRE *re = (REAL_PCRE *)ere;
+ #ifdef SUPPORT_PCRE16
+ int op;
+ pcre_uint16 *ptr = (pcre_uint16 *)re + re->name_table_offset;
+ int length = re->name_count * re->name_entry_size;
+ #ifdef SUPPORT_UTF
+ BOOL utf = (re->options & PCRE_UTF16) != 0;
+ BOOL utf16_char = FALSE;
+ #endif /* SUPPORT_UTF */
+ #endif /* SUPPORT_PCRE16 */
+ /* Always flip the bytes in the main data block and study blocks. */
+ re->magic_number = REVERSED_MAGIC_NUMBER;
+ re->size = swap_uint32(re->size);
+ re->options = swap_uint32(re->options);
+ re->flags = swap_uint16(re->flags);
+ re->top_bracket = swap_uint16(re->top_bracket);
+ re->top_backref = swap_uint16(re->top_backref);
+ re->first_char = swap_uint16(re->first_char);
+ re->req_char = swap_uint16(re->req_char);
+ re->name_table_offset = swap_uint16(re->name_table_offset);
+ re->name_entry_size = swap_uint16(re->name_entry_size);
+ re->name_count = swap_uint16(re->name_count);
+ if (extra != NULL)
+   {
+   pcre_study_data *rsd = (pcre_study_data *)(extra->study_data);
+   rsd->size = swap_uint32(rsd->size);
+   rsd->flags = swap_uint32(rsd->flags);
+   rsd->minlength = swap_uint32(rsd->minlength);
+   }
+ /* In 8-bit mode, that is all we need to do. In 16-bit mode we must swap bytes
+ in the name table, if present, and then in the pattern itself. */
+ #ifdef SUPPORT_PCRE16
+ if (!use_pcre16) return;
+ while(TRUE)
+   {
+   /* Swap previous characters. */
+   while (length-- > 0)
+     {
+     *ptr = swap_uint16(*ptr);
+     ptr++;
+     }
+ #ifdef SUPPORT_UTF
+   if (utf16_char)
+     {
+     if ((ptr[-1] & 0xfc00) == 0xd800)
+       {
+       /* We know that there is only one extra character in UTF-16. */
+       *ptr = swap_uint16(*ptr);
+       ptr++;
+       }
+     }
+   utf16_char = FALSE;
+ #endif /* SUPPORT_UTF */
+   /* Get next opcode. */
+   length = 0;
+   op = *ptr;
+   *ptr++ = swap_uint16(op);
+   switch (op)
+     {
+     case OP_END:
+     return;
+ #ifdef SUPPORT_UTF
+     case OP_CHAR:
+     case OP_CHARI:
+     case OP_NOT:
+     case OP_NOTI:
+     case OP_STAR:
+     case OP_MINSTAR:
+     case OP_PLUS:
+     case OP_MINPLUS:
+     case OP_QUERY:
+     case OP_MINQUERY:
+     case OP_UPTO:
+     case OP_MINUPTO:
+     case OP_EXACT:
+     case OP_POSSTAR:
+     case OP_POSPLUS:
+     case OP_POSQUERY:
+     case OP_POSUPTO:
+     case OP_STARI:
+     case OP_MINSTARI:
+     case OP_PLUSI:
+     case OP_MINPLUSI:
+     case OP_QUERYI:
+     case OP_MINQUERYI:
+     case OP_UPTOI:
+     case OP_MINUPTOI:
+     case OP_EXACTI:
+     case OP_POSSTARI:
+     case OP_POSPLUSI:
+     case OP_POSQUERYI:
+     case OP_POSUPTOI:
+     case OP_NOTSTAR:
+     case OP_NOTMINSTAR:
+     case OP_NOTPLUS:
+     case OP_NOTMINPLUS:
+     case OP_NOTQUERY:
+     case OP_NOTMINQUERY:
+     case OP_NOTUPTO:
+     case OP_NOTMINUPTO:
+     case OP_NOTEXACT:
+     case OP_NOTPOSSTAR:
+     case OP_NOTPOSPLUS:
+     case OP_NOTPOSQUERY:
+     case OP_NOTPOSUPTO:
+     case OP_NOTSTARI:
+     case OP_NOTMINSTARI:
+     case OP_NOTPLUSI:
+     case OP_NOTMINPLUSI:
+     case OP_NOTQUERYI:
+     case OP_NOTMINQUERYI:
+     case OP_NOTUPTOI:
+     case OP_NOTMINUPTOI:
+     case OP_NOTEXACTI:
+     case OP_NOTPOSSTARI:
+     case OP_NOTPOSPLUSI:
+     case OP_NOTPOSQUERYI:
+     case OP_NOTPOSUPTOI:
+     if (utf) utf16_char = TRUE;
+ #endif
+     /* Fall through. */
+     default:
+     length = OP_lengths16[op] - 1;
+     break;
+     case OP_CLASS:
+     case OP_NCLASS:
+     /* Skip the character bit map. */
+     ptr += 32/sizeof(pcre_uint16);
+     length = 0;
+     break;
+     case OP_XCLASS:
+     /* LINK_SIZE can be 1 or 2 in 16 bit mode. */
+     if (LINK_SIZE > 1)
+       length = (int)((((unsigned int)(ptr[0]) << 16) | (unsigned int)(ptr[1]))
+         - (1 + LINK_SIZE + 1));
+     else
+       length = (int)((unsigned int)(ptr[0]) - (1 + LINK_SIZE + 1));
+     /* Reverse the size of the XCLASS instance. */
+     *ptr = swap_uint16(*ptr);
+     ptr++;
+     if (LINK_SIZE > 1)
+       {
+       *ptr = swap_uint16(*ptr);
+       ptr++;
+       }
+     op = *ptr;
+     *ptr = swap_uint16(op);
+     ptr++;
+     if ((op & XCL_MAP) != 0)
+       {
+       /* Skip the character bit map. */
+       ptr += 32/sizeof(pcre_uint16);
+       length -= 32/sizeof(pcre_uint16);
+       }
+     break;
+     }
+   }
+ /* Control should never reach here in 16 bit mode. */
+ #endif /* SUPPORT_PCRE16 */
+ }
+ /*************************************************
+ *        Check match or recursion limit          *
+ *************************************************/
+ static int
+ check_match_limit(pcre *re, pcre_extra *extra, pcre_uint8 *bptr, int len,
+   int start_offset, int options, int *use_offsets, int use_size_offsets,
+   int flag, unsigned long int *limit, int errnumber, const char *msg)
+ {
+ int count;
+ int min = 0;
+ int mid = 64;
+ int max = -1;
+ extra->flags |= flag;
+ for (;;)
+   {
+   *limit = mid;
+   PCRE_EXEC(count, re, extra, bptr, len, start_offset, options,
+     use_offsets, use_size_offsets);
+   if (count == errnumber)
+     {
+     /* fprintf(outfile, "Testing %s limit = %d\n", msg, mid); */
+     min = mid;
+     mid = (mid == max - 1)? max : (max > 0)? (min + max)/2 : mid*2;
+     }
+   else if (count >= 0 || count == PCRE_ERROR_NOMATCH ||
+                          count == PCRE_ERROR_PARTIAL)
+     {
+     if (mid == min + 1)
+       {
+       fprintf(outfile, "Minimum %s limit = %d\n", msg, mid);
+       break;
+       }
+     /* fprintf(outfile, "Testing %s limit = %d\n", msg, mid); */
+     max = mid;
+     mid = (min + mid)/2;
+     }
+   else break;    /* Some other error */
+   }
+ extra->flags &= ~flag;
+ return count;
+ }
+ /*************************************************
+ *         Case-independent strncmp() function    *
+ *************************************************/
+ /*
+ Arguments:
+   s         first string
+   t         second string
+   n         number of characters to compare
+ Returns:    < 0, = 0, or > 0, according to the comparison
+ */
+ static int
+ strncmpic(pcre_uint8 *s, pcre_uint8 *t, int n)
+ {
+ while (n--)
+   {
+   int c = tolower(*s++) - tolower(*t++);
+   if (c) return c;
+   }
+ return 0;
+ }
+ /*************************************************
+ *         Check newline indicator                *
+ *************************************************/
+ /* This is used both at compile and run-time to check for <xxx> escapes. Print
+ a message and return 0 if there is no match.
+ Arguments:
+   p           points after the leading '<'
+   f           file for error message
+ Returns:      appropriate PCRE_NEWLINE_xxx flags, or 0
+ */
+ static int
+ check_newline(pcre_uint8 *p, FILE *f)
+ {
+ if (strncmpic(p, (pcre_uint8 *)"cr>", 3) == 0) return PCRE_NEWLINE_CR;
+ if (strncmpic(p, (pcre_uint8 *)"lf>", 3) == 0) return PCRE_NEWLINE_LF;
+ if (strncmpic(p, (pcre_uint8 *)"crlf>", 5) == 0) return PCRE_NEWLINE_CRLF;
+ if (strncmpic(p, (pcre_uint8 *)"anycrlf>", 8) == 0) return PCRE_NEWLINE_ANYCRLF;
+ if (strncmpic(p, (pcre_uint8 *)"any>", 4) == 0) return PCRE_NEWLINE_ANY;
+ if (strncmpic(p, (pcre_uint8 *)"bsr_anycrlf>", 12) == 0) return PCRE_BSR_ANYCRLF;
+ if (strncmpic(p, (pcre_uint8 *)"bsr_unicode>", 12) == 0) return PCRE_BSR_UNICODE;
+ fprintf(f, "Unknown newline type at: <%s\n", p);
+ return 0;
+ }
+ /*************************************************
+ *             Usage function                     *
+ *************************************************/
+ static void
+ usage(void)
+ {
+ printf("Usage:     pcretest [options] [<input file> [<output file>]]\n\n");
+ printf("Input and output default to stdin and stdout.\n");
+ #ifdef SUPPORT_LIBREADLINE
+ printf("If input is a terminal, readline() is used to read from it.\n");
+ #else
+ printf("This version of pcretest is not linked with readline().\n");
+ #endif
+ printf("\nOptions:\n");
+ #ifdef SUPPORT_PCRE16
+ printf("  -16      use the 16-bit library\n");
+ #endif
+ printf("  -b       show compiled code\n");
+ printf("  -C       show PCRE compile-time options and exit\n");
+ printf("  -C arg   show a specific compile-time option\n");
+ printf("           and exit with its value. The arg can be:\n");
+ printf("     linksize     internal link size [2, 3, 4]\n");
+ printf("     pcre8        8 bit library support enabled [0, 1]\n");
+ printf("     pcre16       16 bit library support enabled [0, 1]\n");
+ printf("     utf          Unicode Transformation Format supported [0, 1]\n");
+ printf("     ucp          Unicode Properties supported [0, 1]\n");
+ printf("     jit          Just-in-time compiler supported [0, 1]\n");
+ printf("     newline      Newline type [CR, LF, CRLF, ANYCRLF, ANY, ???]\n");
+ printf("  -d       debug: show compiled code and information (-b and -i)\n");
+ #if !defined NODFA
+ printf("  -dfa     force DFA matching for all subjects\n");
+ #endif
+ printf("  -help    show usage information\n");
+ printf("  -i       show information about compiled patterns\n"
+        "  -M       find MATCH_LIMIT minimum for each subject\n"
+        "  -m       output memory used information\n"
+        "  -o <n>   set size of offsets vector to <n>\n");
+ #if !defined NOPOSIX
+ printf("  -p       use POSIX interface\n");
+ #endif
+ printf("  -q       quiet: do not output PCRE version number at start\n");
+ printf("  -S <n>   set stack size to <n> megabytes\n");
+ printf("  -s       force each pattern to be studied at basic level\n"
+        "  -s+      force each pattern to be studied, using JIT if available\n"
+        "  -t       time compilation and execution\n");
+ printf("  -t <n>   time compilation and execution, repeating <n> times\n");
+ printf("  -tm      time execution (matching) only\n");
+ printf("  -tm <n>  time execution (matching) only, repeating <n> times\n");
+ }
+ /*************************************************
+ *                Main Program                    *
+ *************************************************/
+ /* Read lines from named file or stdin and write to named file or stdout; lines
+ consist of a regular expression, in delimiters and optionally followed by
+ options, followed by a set of test data, terminated by an empty line. */
+ int main(int argc, char **argv)
+ {
+ FILE *infile = stdin;
+ const char *version;
+ int options = 0;
+ int study_options = 0;
+ int default_find_match_limit = FALSE;
+ int op = 1;
+ int timeit = 0;
+ int timeitm = 0;
+ int showinfo = 0;
+ int showstore = 0;
+ int force_study = -1;
+ int force_study_options = 0;
+ int quiet = 0;
  int size_offsets = 45;
  int size_offsets_max;
- int *offsets;
+ int *offsets = NULL;
  #if !defined NOPOSIX
  int posix = 0;
  #endif
  int debug = 0;
  int done = 0;
- unsigned char buffer[30000];
+ int all_use_dfa = 0;
- unsigned char dbuffer[1024];
+ int yield = 0;
+ int stack_size;
+ pcre_jit_stack *jit_stack = NULL;
+ /* These vectors store, end-to-end, a list of zero-terminated captured
+ substring names, each list itself being terminated by an empty name. Assume
+ that 1024 is plenty long enough for the few names we'll be testing. It is
+ easiest to keep separate 8-bit and 16-bit versions, using the 16-bit version
+ for the actual memory, to ensure alignment. */
+ pcre_uint16 copynames[1024];
+ pcre_uint16 getnames[1024];
+ #ifdef SUPPORT_PCRE16
+ pcre_uint16 *cn16ptr;
+ pcre_uint16 *gn16ptr;
+ #endif
+ #ifdef SUPPORT_PCRE8
+ pcre_uint8 *copynames8 = (pcre_uint8 *)copynames;
+ pcre_uint8 *getnames8 = (pcre_uint8 *)getnames;
+ pcre_uint8 *cn8ptr;
+ pcre_uint8 *gn8ptr;
+ #endif
+ /* Get buffers from malloc() so that valgrind will check their misuse when
+ debugging. They grow automatically when very long lines are read. The 16-bit
+ buffer (buffer16) is obtained only if needed. */
+ buffer = (pcre_uint8 *)malloc(buffer_size);
+ dbuffer = (pcre_uint8 *)malloc(buffer_size);
+ pbuffer = (pcre_uint8 *)malloc(buffer_size);
- /* Static so that new_malloc can use it. */
+ /* The outfile variable is static so that new_malloc can use it. */
  outfile = stdout;
+ /* The following  _setmode() stuff is some Windows magic that tells its runtime
+ library to translate CRLF into a single LF character. At least, that's what
+ I've been told: never having used Windows I take this all on trust. Originally
+ it set 0x8000, but then I was advised that _O_BINARY was better. */
+ #if defined(_WIN32) || defined(WIN32)
+ _setmode( _fileno( stdout ), _O_BINARY );
+ #endif
+ /* Get the version number: both pcre_version() and pcre16_version() give the
+ same answer. We just need to ensure that we call one that is available. */
+ #ifdef SUPPORT_PCRE8
+ version = pcre_version();
+ #else
+ version = pcre16_version();
+ #endif
  /* Scan options */
  while (argc > 1 && argv[op][0] == '-')
    {
-   unsigned char *endptr;
+   pcre_uint8 *endptr;
-   if (strcmp(argv[op], "-s") == 0 || strcmp(argv[op], "-m") == 0)
+   if (strcmp(argv[op], "-m") == 0) showstore = 1;
-     showstore = 1;
+   else if (strcmp(argv[op], "-s") == 0) force_study = 0;
-   else if (strcmp(argv[op], "-t") == 0) timeit = 1;
+   else if (strcmp(argv[op], "-s+") == 0)
+     {
+     force_study = 1;
+     force_study_options = PCRE_STUDY_JIT_COMPILE;
+     }
+   else if (strcmp(argv[op], "-16") == 0)
+     {
+ #ifdef SUPPORT_PCRE16
+     use_pcre16 = 1;
+ #else
+     printf("** This version of PCRE was built without 16-bit support\n");
+     exit(1);
+ #endif
+     }
+   else if (strcmp(argv[op], "-q") == 0) quiet = 1;
+   else if (strcmp(argv[op], "-b") == 0) debug = 1;
    else if (strcmp(argv[op], "-i") == 0) showinfo = 1;
    else if (strcmp(argv[op], "-d") == 0) showinfo = debug = 1;
+   else if (strcmp(argv[op], "-M") == 0) default_find_match_limit = TRUE;
+ #if !defined NODFA
+   else if (strcmp(argv[op], "-dfa") == 0) all_use_dfa = 1;
+ #endif
    else if (strcmp(argv[op], "-o") == 0 && argc > 2 &&
-       ((size_offsets = get_value((unsigned char *)argv[op+1], &endptr)),
+       ((size_offsets = get_value((pcre_uint8 *)argv[op+1], &endptr)),
          *endptr == 0))
      {
      op++;
      argc--;
      }
+   else if (strcmp(argv[op], "-t") == 0 || strcmp(argv[op], "-tm") == 0)
+     {
+     int both = argv[op][2] == 0;
+     int temp;
+     if (argc > 2 && (temp = get_value((pcre_uint8 *)argv[op+1], &endptr),
+                      *endptr == 0))
+       {
+       timeitm = temp;
+       op++;
+       argc--;
+       }
+     else timeitm = LOOPREPEAT;
+     if (both) timeit = timeitm;
+     }
+   else if (strcmp(argv[op], "-S") == 0 && argc > 2 &&
+       ((stack_size = get_value((pcre_uint8 *)argv[op+1], &endptr)),
+         *endptr == 0))
+     {
+ #if defined(_WIN32) || defined(WIN32) || defined(__minix)
+     printf("PCRE: -S not supported on this OS\n");
+     exit(1);
+ #else
+     int rc;
+     struct rlimit rlim;
+     getrlimit(RLIMIT_STACK, &rlim);
+     rlim.rlim_cur = stack_size * 1024 * 1024;
+     rc = setrlimit(RLIMIT_STACK, &rlim);
+     if (rc != 0)
+       {
+     printf("PCRE: setrlimit() failed with error %d\n", rc);
+     exit(1);
+       }
+     op++;
+     argc--;
+ #endif
+     }
  #if !defined NOPOSIX
    else if (strcmp(argv[op], "-p") == 0) posix = 1;
  #endif
    else if (strcmp(argv[op], "-C") == 0)
      {
      int rc;
-     printf("PCRE version %s\n", pcre_version());
+     unsigned long int lrc;
+     if (argc > 2)
+       {
+       if (strcmp(argv[op + 1], "linksize") == 0)
+         {
+         (void)PCRE_CONFIG(PCRE_CONFIG_LINK_SIZE, &rc);
+         printf("%d\n", rc);
+         yield = rc;
+         goto EXIT;
+         }
+       if (strcmp(argv[op + 1], "pcre8") == 0)
+         {
+ #ifdef SUPPORT_PCRE8
+         printf("1\n");
+         yield = 1;
+ #else
+         printf("0\n");
+         yield = 0;
+ #endif
+         goto EXIT;
+         }
+       if (strcmp(argv[op + 1], "pcre16") == 0)
+         {
+ #ifdef SUPPORT_PCRE16
+         printf("1\n");
+         yield = 1;
+ #else
+         printf("0\n");
+         yield = 0;
+ #endif
+         goto EXIT;
+         }
+       if (strcmp(argv[op + 1], "utf") == 0)
+         {
+ #ifdef SUPPORT_PCRE8
+         (void)pcre_config(PCRE_CONFIG_UTF8, &rc);
+         printf("%d\n", rc);
+         yield = rc;
+ #else
+         (void)pcre16_config(PCRE_CONFIG_UTF16, &rc);
+         printf("%d\n", rc);
+         yield = rc;
+ #endif
+         goto EXIT;
+         }
+       if (strcmp(argv[op + 1], "ucp") == 0)
+         {
+         (void)PCRE_CONFIG(PCRE_CONFIG_UNICODE_PROPERTIES, &rc);
+         printf("%d\n", rc);
+         yield = rc;
+         goto EXIT;
+         }
+       if (strcmp(argv[op + 1], "jit") == 0)
+         {
+         (void)PCRE_CONFIG(PCRE_CONFIG_JIT, &rc);
+         printf("%d\n", rc);
+         yield = rc;
+         goto EXIT;
+         }
+       if (strcmp(argv[op + 1], "newline") == 0)
+         {
+         (void)PCRE_CONFIG(PCRE_CONFIG_NEWLINE, &rc);
+         /* Note that these values are always the ASCII values, even
+         in EBCDIC environments. CR is 13 and NL is 10. */
+         printf("%s\n", (rc == 13)? "CR" :
+           (rc == 10)? "LF" : (rc == (13<<8 | 10))? "CRLF" :
+           (rc == -2)? "ANYCRLF" :
+           (rc == -1)? "ANY" : "???");
+         goto EXIT;
+         }
+       printf("Unknown -C option: %s\n", argv[op + 1]);
+       goto EXIT;
+       }
+     printf("PCRE version %s\n", version);
      printf("Compiled with\n");
+ /* At least one of SUPPORT_PCRE8 and SUPPORT_PCRE16 will be set. If both
+ are set, either both UTFs are supported or both are not supported. */
+ #if defined SUPPORT_PCRE8 && defined SUPPORT_PCRE16
+     printf("  8-bit and 16-bit support\n");
+     (void)pcre_config(PCRE_CONFIG_UTF8, &rc);
+     if (rc)
+       printf("  UTF-8 and UTF-16 support\n");
+     else
+       printf("  No UTF-8 or UTF-16 support\n");
+ #elif defined SUPPORT_PCRE8
+     printf("  8-bit support only\n");
      (void)pcre_config(PCRE_CONFIG_UTF8, &rc);
      printf("  %sUTF-8 support\n", rc? "" : "No ");
-     (void)pcre_config(PCRE_CONFIG_NEWLINE, &rc);
+ #else
-     printf("  Newline character is %s\n", (rc == '\r')? "CR" : "LF");
+     printf("  16-bit support only\n");
-     (void)pcre_config(PCRE_CONFIG_LINK_SIZE, &rc);
+     (void)pcre16_config(PCRE_CONFIG_UTF16, &rc);
+     printf("  %sUTF-16 support\n", rc? "" : "No ");
+ #endif
+     (void)PCRE_CONFIG(PCRE_CONFIG_UNICODE_PROPERTIES, &rc);
+     printf("  %sUnicode properties support\n", rc? "" : "No ");
+     (void)PCRE_CONFIG(PCRE_CONFIG_JIT, &rc);
+     if (rc)
+       {
+       const char *arch;
+       (void)PCRE_CONFIG(PCRE_CONFIG_JITTARGET, &arch);
+       printf("  Just-in-time compiler support: %s\n", arch);
+       }
+     else
+       printf("  No just-in-time compiler support\n");
+     (void)PCRE_CONFIG(PCRE_CONFIG_NEWLINE, &rc);
+     /* Note that these values are always the ASCII values, even
+     in EBCDIC environments. CR is 13 and NL is 10. */
+     printf("  Newline sequence is %s\n", (rc == 13)? "CR" :
+       (rc == 10)? "LF" : (rc == (13<<8 | 10))? "CRLF" :
+       (rc == -2)? "ANYCRLF" :
+       (rc == -1)? "ANY" : "???");
+     (void)PCRE_CONFIG(PCRE_CONFIG_BSR, &rc);
+     printf("  \\R matches %s\n", rc? "CR, LF, or CRLF only" :
+                                      "all Unicode newlines");
+     (void)PCRE_CONFIG(PCRE_CONFIG_LINK_SIZE, &rc);
      printf("  Internal link size = %d\n", rc);
-     (void)pcre_config(PCRE_CONFIG_POSIX_MALLOC_THRESHOLD, &rc);
+     (void)PCRE_CONFIG(PCRE_CONFIG_POSIX_MALLOC_THRESHOLD, &rc);
      printf("  POSIX malloc threshold = %d\n", rc);
-     (void)pcre_config(PCRE_CONFIG_MATCH_LIMIT, &rc);
+     (void)PCRE_CONFIG(PCRE_CONFIG_MATCH_LIMIT, &lrc);
-     printf("  Default match limit = %d\n", rc);
+     printf("  Default match limit = %ld\n", lrc);
-     exit(0);
+     (void)PCRE_CONFIG(PCRE_CONFIG_MATCH_LIMIT_RECURSION, &lrc);
+     printf("  Default recursion depth limit = %ld\n", lrc);
+     (void)PCRE_CONFIG(PCRE_CONFIG_STACKRECURSE, &rc);
+     printf("  Match recursion uses %s", rc? "stack" : "heap");
+     if (showstore)
+       {
+       PCRE_EXEC(stack_size, NULL, NULL, NULL, -999, -999, 0, NULL, 0);
+       printf(": %sframe size = %d bytes", rc? "approximate " : "", -stack_size);
+       }
+     printf("\n");
+     goto EXIT;
+     }
+   else if (strcmp(argv[op], "-help") == 0 ||
+            strcmp(argv[op], "--help") == 0)
+     {
+     usage();
+     goto EXIT;
      }
    else
      {
      printf("** Unknown or malformed option %s\n", argv[op]);
-     printf("Usage:   pcretest [-d] [-i] [-o <n>] [-p] [-s] [-t] [<input> [<output>]]\n");
+     usage();
-     printf("  -C     show PCRE compile-time options and exit\n");
+     yield = 1;
-     printf("  -d     debug: show compiled code; implies -i\n"
+     goto EXIT;
-            "  -i     show information about compiled pattern\n"
-            "  -o <n> set size of offsets vector to <n>\n");
- #if !defined NOPOSIX
-     printf("  -p     use POSIX interface\n");
- #endif
-     printf("  -s     output store information\n"
-            "  -t     time compilation and execution\n");
-     return 1;
      }
    op++;
    argc--;
-Line 455 
 while (argc > 1 && argv[op][0] == '-')
+Line 2464 
 while (argc > 1 && argv[op][0] == '-')
  /* Get the store for the offsets vector, and remember what it was */
  size_offsets_max = size_offsets;
- offsets = malloc(size_offsets_max * sizeof(int));
+ offsets = (int *)malloc(size_offsets_max * sizeof(int));
  if (offsets == NULL)
    {
    printf("** Failed to get %d bytes of memory for offsets vector\n",
-     size_offsets_max * sizeof(int));
+     (int)(size_offsets_max * sizeof(int)));
-   return 1;
+   yield = 1;
+   goto EXIT;
    }
  /* Sort out the input and output files */
  if (argc > 1)
    {
-   infile = fopen(argv[op], "r");
+   infile = fopen(argv[op], INPUT_MODE);
    if (infile == NULL)
      {
      printf("** Failed to open %s\n", argv[op]);
-     return 1;
+     yield = 1;
+     goto EXIT;
      }
    }
  if (argc > 2)
    {
-   outfile = fopen(argv[op+1], "w");
+   outfile = fopen(argv[op+1], OUTPUT_MODE);
    if (outfile == NULL)
      {
      printf("** Failed to open %s\n", argv[op+1]);
-     return 1;
+     yield = 1;
+     goto EXIT;
      }
    }
  /* Set alternative malloc function */
+ #ifdef SUPPORT_PCRE8
  pcre_malloc = new_malloc;
+ pcre_free = new_free;
+ pcre_stack_malloc = stack_malloc;
+ pcre_stack_free = stack_free;
+ #endif
+ #ifdef SUPPORT_PCRE16
+ pcre16_malloc = new_malloc;
+ pcre16_free = new_free;
+ pcre16_stack_malloc = stack_malloc;
+ pcre16_stack_free = stack_free;
+ #endif
- /* Heading line, then prompt for first regex if stdin */
+ /* Heading line unless quiet, then prompt for first regex if stdin */
- fprintf(outfile, "PCRE version %s\n\n", pcre_version());
+ if (!quiet) fprintf(outfile, "PCRE version %s\n\n", version);
  /* Main loop */
-Line 506 
 while (!done)
+Line 2530 
 while (!done)
  #endif
    const char *error;
-   unsigned char *p, *pp, *ppp;
+   pcre_uint8 *markptr;
-   const unsigned char *tables = NULL;
+   pcre_uint8 *p, *pp, *ppp;
+   pcre_uint8 *to_file = NULL;
+   const pcre_uint8 *tables = NULL;
+   unsigned long int get_options;
+   unsigned long int true_size, true_study_size = 0;
+   size_t size, regex_gotten_store;
+   int do_allcaps = 0;
+   int do_mark = 0;
    int do_study = 0;
+   int no_force_study = 0;
    int do_debug = debug;
    int do_G = 0;
    int do_g = 0;
    int do_showinfo = showinfo;
    int do_showrest = 0;
-   int erroroffset, len, delimiter;
+   int do_showcaprest = 0;
+   int do_flip = 0;
+   int erroroffset, len, delimiter, poffset;
-   utf8 = 0;
+   use_utf = 0;
+   debug_lengths = 1;
-   if (infile == stdin) printf("  re> ");
+   if (extend_inputline(infile, buffer, "  re> ") == NULL) break;
-   if (fgets((char *)buffer, sizeof(buffer), infile) == NULL) break;
    if (infile != stdin) fprintf(outfile, "%s", (char *)buffer);
    fflush(outfile);
-Line 527 
 while (!done)
+Line 2561 
 while (!done)
    while (isspace(*p)) p++;
    if (*p == 0) continue;
-   /* Get the delimiter and seek the end of the pattern; if is isn't
+   /* See if the pattern is to be loaded pre-compiled from a file. */
-   complete, read more. */
+   if (*p == '<' && strchr((char *)(p+1), '<') == NULL)
+     {
+     pcre_uint32 magic;
+     pcre_uint8 sbuf[8];
+     FILE *f;
+     p++;
+     if (*p == '!')
+       {
+       do_debug = TRUE;
+       do_showinfo = TRUE;
+       p++;
+       }
+     pp = p + (int)strlen((char *)p);
+     while (isspace(pp[-1])) pp--;
+     *pp = 0;
+     f = fopen((char *)p, "rb");
+     if (f == NULL)
+       {
+       fprintf(outfile, "Failed to open %s: %s\n", p, strerror(errno));
+       continue;
+       }
+     first_gotten_store = 0;
+     if (fread(sbuf, 1, 8, f) != 8) goto FAIL_READ;
+     true_size =
+       (sbuf[0] << 24) | (sbuf[1] << 16) | (sbuf[2] << 8) | sbuf[3];
+     true_study_size =
+       (sbuf[4] << 24) | (sbuf[5] << 16) | (sbuf[6] << 8) | sbuf[7];
+     re = (pcre *)new_malloc(true_size);
+     regex_gotten_store = first_gotten_store;
+     if (fread(re, 1, true_size, f) != true_size) goto FAIL_READ;
+     magic = ((REAL_PCRE *)re)->magic_number;
+     if (magic != MAGIC_NUMBER)
+       {
+       if (swap_uint32(magic) == MAGIC_NUMBER)
+         {
+         do_flip = 1;
+         }
+       else
+         {
+         fprintf(outfile, "Data in %s is not a compiled PCRE regex\n", p);
+         fclose(f);
+         continue;
+         }
+       }
+     /* We hide the byte-invert info for little and big endian tests. */
+     fprintf(outfile, "Compiled pattern%s loaded from %s\n",
+       do_flip && (p[-1] == '<') ? " (byte-inverted)" : "", p);
+     /* Now see if there is any following study data. */
+     if (true_study_size != 0)
+       {
+       pcre_study_data *psd;
+       extra = (pcre_extra *)new_malloc(sizeof(pcre_extra) + true_study_size);
+       extra->flags = PCRE_EXTRA_STUDY_DATA;
+       psd = (pcre_study_data *)(((char *)extra) + sizeof(pcre_extra));
+       extra->study_data = psd;
+       if (fread(psd, 1, true_study_size, f) != true_study_size)
+         {
+         FAIL_READ:
+         fprintf(outfile, "Failed to read data from %s\n", p);
+         if (extra != NULL)
+           {
+           PCRE_FREE_STUDY(extra);
+           }
+         if (re != NULL) new_free(re);
+         fclose(f);
+         continue;
+         }
+       fprintf(outfile, "Study data loaded from %s\n", p);
+       do_study = 1;     /* To get the data output if requested */
+       }
+     else fprintf(outfile, "No study data\n");
+     /* Flip the necessary bytes. */
+     if (do_flip)
+       {
+       int rc;
+       PCRE_PATTERN_TO_HOST_BYTE_ORDER(rc, re, extra, NULL);
+       if (rc == PCRE_ERROR_BADMODE)
+         {
+         /* Simulate the result of the function call below. */
+         fprintf(outfile, "Error %d from pcre%s_fullinfo(%d)\n", rc,
+           use_pcre16? "16" : "", PCRE_INFO_OPTIONS);
+         fprintf(outfile, "Running in %s-bit mode but pattern was compiled in "
+           "%s-bit mode\n", use_pcre16? "16":"8", use_pcre16? "8":"16");
+         continue;
+         }
+       }
+     /* Need to know if UTF-8 for printing data strings. */
+     if (new_info(re, NULL, PCRE_INFO_OPTIONS, &get_options) < 0) continue;
+     use_utf = (get_options & PCRE_UTF8) != 0;
+     fclose(f);
+     goto SHOW_INFO;
+     }
+   /* In-line pattern (the usual case). Get the delimiter and seek the end of
+   the pattern; if it isn't complete, read more. */
    delimiter = *p++;
    if (isalnum(delimiter) || delimiter == '\\')
      {
-     fprintf(outfile, "** Delimiter must not be alphameric or \\\n");
+     fprintf(outfile, "** Delimiter must not be alphanumeric or \\\n");
      goto SKIP_DATA;
      }
    pp = p;
+   poffset = (int)(p - buffer);
    for(;;)
      {
-Line 549 
 while (!done)
+Line 2697 
 while (!done)
        pp++;
        }
      if (*pp != 0) break;
+     if ((pp = extend_inputline(infile, pp, "    > ")) == NULL)
-     len = sizeof(buffer) - (pp - buffer);
-     if (len < 256)
-       {
-       fprintf(outfile, "** Expression too long - missing delimiter?\n");
-       goto SKIP_DATA;
-       }
-     if (infile == stdin) printf("    > ");
-     if (fgets((char *)pp, len, infile) == NULL)
        {
        fprintf(outfile, "** Unexpected EOF\n");
        done = 1;
-Line 567 
 while (!done)
+Line 2706 
 while (!done)
      if (infile != stdin) fprintf(outfile, "%s", (char *)pp);
      }
+   /* The buffer may have moved while being extended; reset the start of data
+   pointer to the correct relative point in the buffer. */
+   p = buffer + poffset;
    /* If the first character after the delimiter is backslash, make
    the pattern end with backslash. This is purely to provide a way
    of testing for the error message when a pattern ends with backslash. */
    if (pp[1] == '\\') *pp++ = '\\';
-   /* Terminate the pattern at the delimiter */
+   /* Terminate the pattern at the delimiter, and save a copy of the pattern
+   for callouts. */
    *pp++ = 0;
+   strcpy((char *)pbuffer, (char *)p);
    /* Look for options after final delimiter */
-Line 587 
 while (!done)
+Line 2733 
 while (!done)
      {
      switch (*pp++)
        {
+       case 'f': options |= PCRE_FIRSTLINE; break;
        case 'g': do_g = 1; break;
        case 'i': options |= PCRE_CASELESS; break;
        case 'm': options |= PCRE_MULTILINE; break;
        case 's': options |= PCRE_DOTALL; break;
        case 'x': options |= PCRE_EXTENDED; break;
-       case '+': do_showrest = 1; break;
+       case '+':
+       if (do_showrest) do_showcaprest = 1; else do_showrest = 1;
+       break;
+       case '=': do_allcaps = 1; break;
        case 'A': options |= PCRE_ANCHORED; break;
+       case 'B': do_debug = 1; break;
+       case 'C': options |= PCRE_AUTO_CALLOUT; break;
        case 'D': do_debug = do_showinfo = 1; break;
        case 'E': options |= PCRE_DOLLAR_ENDONLY; break;
+       case 'F': do_flip = 1; break;
        case 'G': do_G = 1; break;
        case 'I': do_showinfo = 1; break;
+       case 'J': options |= PCRE_DUPNAMES; break;
+       case 'K': do_mark = 1; break;
        case 'M': log_store = 1; break;
        case 'N': options |= PCRE_NO_AUTO_CAPTURE; break;
-Line 606 
 while (!done)
+Line 2762 
 while (!done)
        case 'P': do_posix = 1; break;
  #endif
-       case 'S': do_study = 1; break;
+       case 'S':
+       if (do_study == 0)
+         {
+         do_study = 1;
+         if (*pp == '+')
+           {
+           study_options |= PCRE_STUDY_JIT_COMPILE;
+           pp++;
+           }
+         }
+       else
+         {
+         do_study = 0;
+         no_force_study = 1;
+         }
+       break;
        case 'U': options |= PCRE_UNGREEDY; break;
+       case 'W': options |= PCRE_UCP; break;
        case 'X': options |= PCRE_EXTRA; break;
-       case '8': options |= PCRE_UTF8; utf8 = 1; break;
+       case 'Y': options |= PCRE_NO_START_OPTIMISE; break;
+       case 'Z': debug_lengths = 0; break;
+       case '8': options |= PCRE_UTF8; use_utf = 1; break;
+       case '?': options |= PCRE_NO_UTF8_CHECK; break;
+       case 'T':
+       switch (*pp++)
+         {
+         case '0': tables = tables0; break;
+         case '1': tables = tables1; break;
+         case '\r':
+         case '\n':
+         case ' ':
+         case 0:
+         fprintf(outfile, "** Missing table number after /T\n");
+         goto SKIP_DATA;
+         default:
+         fprintf(outfile, "** Bad table number \"%c\" after /T\n", pp[-1]);
+         goto SKIP_DATA;
+         }
+       break;
        case 'L':
        ppp = pp;
-       while (*ppp != '\n' && *ppp != ' ') ppp++;
+       /* The '\r' test here is so that it works on Windows. */
+       /* The '0' test is just in case this is an unterminated line. */
+       while (*ppp != 0 && *ppp != '\n' && *ppp != '\r' && *ppp != ' ') ppp++;
        *ppp = 0;
        if (setlocale(LC_CTYPE, (const char *)pp) == NULL)
          {
          fprintf(outfile, "** Failed to set locale \"%s\"\n", pp);
          goto SKIP_DATA;
          }
-       tables = pcre_maketables();
+       locale_set = 1;
+       tables = PCRE_MAKETABLES;
        pp = ppp;
        break;
-       case '\n': case ' ': break;
+       case '>':
+       to_file = pp;
+       while (*pp != 0) pp++;
+       while (isspace(pp[-1])) pp--;
+       *pp = 0;
+       break;
+       case '<':
+         {
+         if (strncmpic(pp, (pcre_uint8 *)"JS>", 3) == 0)
+           {
+           options |= PCRE_JAVASCRIPT_COMPAT;
+           pp += 3;
+           }
+         else
+           {
+           int x = check_newline(pp, outfile);
+           if (x == 0) goto SKIP_DATA;
+           options |= x;
+           while (*pp++ != '>');
+           }
+         }
+       break;
+       case '\r':                      /* So that it works in Windows */
+       case '\n':
+       case ' ':
+       break;
        default:
        fprintf(outfile, "** Unknown option '%c'\n", pp[-1]);
        goto SKIP_DATA;
-Line 633 
 while (!done)
+Line 2859 
 while (!done)
    /* Handle compiling via the POSIX interface, which doesn't support the
    timing, showing, or debugging options, nor the ability to pass over
-   local character tables. */
+   local character tables. Neither does it have 16-bit support. */
  #if !defined NOPOSIX
    if (posix || do_posix)
      {
      int rc;
      int cflags = 0;
      if ((options & PCRE_CASELESS) != 0) cflags |= REG_ICASE;
      if ((options & PCRE_MULTILINE) != 0) cflags |= REG_NEWLINE;
+     if ((options & PCRE_DOTALL) != 0) cflags |= REG_DOTALL;
+     if ((options & PCRE_NO_AUTO_CAPTURE) != 0) cflags |= REG_NOSUB;
+     if ((options & PCRE_UTF8) != 0) cflags |= REG_UTF8;
+     if ((options & PCRE_UCP) != 0) cflags |= REG_UCP;
+     if ((options & PCRE_UNGREEDY) != 0) cflags |= REG_UNGREEDY;
+     first_gotten_store = 0;
      rc = regcomp(&preg, (char *)p, cflags);
      /* Compilation failed; go back for another re, skipping to blank line
-Line 649 
 while (!done)
+Line 2883 
 while (!done)
      if (rc != 0)
        {
-       (void)regerror(rc, &preg, (char *)buffer, sizeof(buffer));
+       (void)regerror(rc, &preg, (char *)buffer, buffer_size);
        fprintf(outfile, "Failed: POSIX code %d: %s\n", rc, buffer);
        goto SKIP_DATA;
        }
-Line 661 
 while (!done)
+Line 2895 
 while (!done)
  #endif  /* !defined NOPOSIX */
      {
-     if (timeit)
+     /* In 16-bit mode, convert the input. */
+ #ifdef SUPPORT_PCRE16
+     if (use_pcre16)
+       {
+       switch(to16(FALSE, p, options & PCRE_UTF8, (int)strlen((char *)p)))
+         {
+         case -1:
+         fprintf(outfile, "**Failed: invalid UTF-8 string cannot be "
+           "converted to UTF-16\n");
+         goto SKIP_DATA;
+         case -2:
+         fprintf(outfile, "**Failed: character value greater than 0x10ffff "
+           "cannot be converted to UTF-16\n");
+         goto SKIP_DATA;
+         case -3: /* "Impossible error" when to16 is called arg1 FALSE */
+         fprintf(outfile, "**Failed: character value greater than 0xffff "
+           "cannot be converted to 16-bit in non-UTF mode\n");
+         goto SKIP_DATA;
+         default:
+         break;
+         }
+       p = (pcre_uint8 *)buffer16;
+       }
+ #endif
+     /* Compile many times when timing */
+     if (timeit > 0)
        {
        register int i;
        clock_t time_taken;
        clock_t start_time = clock();
-       for (i = 0; i < LOOPREPEAT; i++)
+       for (i = 0; i < timeit; i++)
          {
-         re = pcre_compile((char *)p, options, &error, &erroroffset, tables);
+         PCRE_COMPILE(re, p, options, &error, &erroroffset, tables);
          if (re != NULL) free(re);
          }
        time_taken = clock() - start_time;
-       fprintf(outfile, "Compile time %.3f milliseconds\n",
+       fprintf(outfile, "Compile time %.4f milliseconds\n",
-         (((double)time_taken * 1000.0) / (double)LOOPREPEAT) /
+         (((double)time_taken * 1000.0) / (double)timeit) /
            (double)CLOCKS_PER_SEC);
        }
-     re = pcre_compile((char *)p, options, &error, &erroroffset, tables);
+     first_gotten_store = 0;
+     PCRE_COMPILE(re, p, options, &error, &erroroffset, tables);
      /* Compilation failed; go back for another re, skipping to blank line
      if non-interactive. */
-Line 690 
 while (!done)
+Line 2956 
 while (!done)
          {
          for (;;)
            {
-           if (fgets((char *)buffer, sizeof(buffer), infile) == NULL)
+           if (extend_inputline(infile, buffer, NULL) == NULL)
              {
              done = 1;
              goto CONTINUE;
-Line 704 
 while (!done)
+Line 2970 
 while (!done)
        goto CONTINUE;
        }
-     /* Compilation succeeded; print data if required. There are now two
+     /* Compilation succeeded. It is now possible to set the UTF-8 option from
-     info-returning functions. The old one has a limited interface and
+     within the regex; check for this so that we know how to process the data
-     returns only limited data. Check that it agrees with the newer one. */
+     lines. */
+     if (new_info(re, NULL, PCRE_INFO_OPTIONS, &get_options) < 0)
+       goto SKIP_DATA;
+     if ((get_options & PCRE_UTF8) != 0) use_utf = 1;
+     /* Extract the size for possible writing before possibly flipping it,
+     and remember the store that was got. */
+     true_size = ((REAL_PCRE *)re)->size;
+     regex_gotten_store = first_gotten_store;
+     /* Output code size information if requested */
      if (log_store)
        fprintf(outfile, "Memory allocation (code space): %d\n",
-         (int)(gotten_store -
+         (int)(first_gotten_store -
-               sizeof(real_pcre) -
+               sizeof(REAL_PCRE) -
-               ((real_pcre *)re)->name_count * ((real_pcre *)re)->name_entry_size));
+               ((REAL_PCRE *)re)->name_count * ((REAL_PCRE *)re)->name_entry_size));
+     /* If -s or /S was present, study the regex to generate additional info to
+     help with the matching, unless the pattern has the SS option, which
+     suppresses the effect of /S (used for a few test patterns where studying is
+     never sensible). */
-     if (do_showinfo)
+     if (do_study || (force_study >= 0 && !no_force_study))
        {
-       unsigned long int get_options;
+       if (timeit > 0)
-       int old_first_char, old_options, old_count;
-       int count, backrefmax, first_char, need_char;
-       int nameentrysize, namecount;
-       const uschar *nametable;
-       size_t size;
-       if (do_debug)
          {
-         fprintf(outfile, "------------------------------------------------------------------\n");
+         register int i;
-         print_internals(re, outfile);
+         clock_t time_taken;
+         clock_t start_time = clock();
+         for (i = 0; i < timeit; i++)
+           {
+           PCRE_STUDY(extra, re, study_options | force_study_options, &error);
+           }
+         time_taken = clock() - start_time;
+         if (extra != NULL)
+           {
+           PCRE_FREE_STUDY(extra);
+           }
+         fprintf(outfile, "  Study time %.4f milliseconds\n",
+           (((double)time_taken * 1000.0) / (double)timeit) /
+             (double)CLOCKS_PER_SEC);
          }
+       PCRE_STUDY(extra, re, study_options | force_study_options, &error);
-       new_info(re, NULL, PCRE_INFO_OPTIONS, &get_options);
+       if (error != NULL)
-       new_info(re, NULL, PCRE_INFO_SIZE, &size);
+         fprintf(outfile, "Failed to study: %s\n", error);
-       new_info(re, NULL, PCRE_INFO_CAPTURECOUNT, &count);
+       else if (extra != NULL)
-       new_info(re, NULL, PCRE_INFO_BACKREFMAX, &backrefmax);
-       new_info(re, NULL, PCRE_INFO_FIRSTBYTE, &first_char);
-       new_info(re, NULL, PCRE_INFO_LASTLITERAL, &need_char);
-       new_info(re, NULL, PCRE_INFO_NAMEENTRYSIZE, &nameentrysize);
-       new_info(re, NULL, PCRE_INFO_NAMECOUNT, &namecount);
-       new_info(re, NULL, PCRE_INFO_NAMETABLE, &nametable);
-       old_count = pcre_info(re, &old_options, &old_first_char);
-       if (count < 0) fprintf(outfile,
-         "Error %d from pcre_info()\n", count);
-       else
          {
-         if (old_count != count) fprintf(outfile,
+         true_study_size = ((pcre_study_data *)(extra->study_data))->size;
-           "Count disagreement: pcre_fullinfo=%d pcre_info=%d\n", count,
+         if (log_store)
-             old_count);
+           {
+           size_t jitsize;
+           if (new_info(re, extra, PCRE_INFO_JITSIZE, &jitsize) == 0 &&
+               jitsize != 0)
+             fprintf(outfile, "Memory allocation (JIT code): %d\n", (int)jitsize);
+           }
+         }
+       }
-         if (old_first_char != first_char) fprintf(outfile,
+     /* If /K was present, we set up for handling MARK data. */
-           "First char disagreement: pcre_fullinfo=%d pcre_info=%d\n",
-             first_char, old_first_char);
-         if (old_options != (int)get_options) fprintf(outfile,
+     if (do_mark)
-           "Options disagreement: pcre_fullinfo=%ld pcre_info=%d\n",
+       {
-             get_options, old_options);
+       if (extra == NULL)
+         {
+         extra = (pcre_extra *)malloc(sizeof(pcre_extra));
+         extra->flags = 0;
          }
+       extra->mark = &markptr;
+       extra->flags |= PCRE_EXTRA_MARK;
+       }
+     /* Extract and display information from the compiled data if required. */
+     SHOW_INFO:
+     if (do_debug)
+       {
+       fprintf(outfile, "------------------------------------------------------------------\n");
+       PCRE_PRINTINT(re, outfile, debug_lengths);
+       }
+     /* We already have the options in get_options (see above) */
+     if (do_showinfo)
+       {
+       unsigned long int all_options;
+       int count, backrefmax, first_char, need_char, okpartial, jchanged,
+         hascrorlf;
+       int nameentrysize, namecount;
+       const pcre_uint8 *nametable;
+       if (new_info(re, NULL, PCRE_INFO_SIZE, &size) +
+           new_info(re, NULL, PCRE_INFO_CAPTURECOUNT, &count) +
+           new_info(re, NULL, PCRE_INFO_BACKREFMAX, &backrefmax) +
+           new_info(re, NULL, PCRE_INFO_FIRSTBYTE, &first_char) +
+           new_info(re, NULL, PCRE_INFO_LASTLITERAL, &need_char) +
+           new_info(re, NULL, PCRE_INFO_NAMEENTRYSIZE, &nameentrysize) +
+           new_info(re, NULL, PCRE_INFO_NAMECOUNT, &namecount) +
+           new_info(re, NULL, PCRE_INFO_NAMETABLE, (void *)&nametable) +
+           new_info(re, NULL, PCRE_INFO_OKPARTIAL, &okpartial) +
+           new_info(re, NULL, PCRE_INFO_JCHANGED, &jchanged) +
+           new_info(re, NULL, PCRE_INFO_HASCRORLF, &hascrorlf)
+           != 0)
+         goto SKIP_DATA;
-       if (size != gotten_store) fprintf(outfile,
+       if (size != regex_gotten_store) fprintf(outfile,
          "Size disagreement: pcre_fullinfo=%d call to malloc for %d\n",
-         size, gotten_store);
+         (int)size, (int)regex_gotten_store);
        fprintf(outfile, "Capturing subpattern count = %d\n", count);
        if (backrefmax > 0)
-Line 770 
 while (!done)
+Line 3093 
 while (!done)
          fprintf(outfile, "Named capturing subpatterns:\n");
          while (namecount-- > 0)
            {
-           fprintf(outfile, "  %s %*s%3d\n", nametable + 2,
+ #if defined SUPPORT_PCRE8 && defined SUPPORT_PCRE16
-             nameentrysize - 3 - (int)strlen((char *)nametable + 2), "",
+           int imm2_size = use_pcre16 ? 1 : 2;
-             GET2(nametable, 0));
+ #else
+           int imm2_size = IMM2_SIZE;
+ #endif
+           int length = (int)STRLEN(nametable + imm2_size);
+           fprintf(outfile, "  ");
+           PCHARSV(nametable, imm2_size, length, outfile);
+           while (length++ < nameentrysize - imm2_size) putc(' ', outfile);
+ #if defined SUPPORT_PCRE8 && defined SUPPORT_PCRE16
+           fprintf(outfile, "%3d\n", use_pcre16?
+              (int)(((PCRE_SPTR16)nametable)[0])
+             :((int)nametable[0] << 8) | (int)nametable[1]);
+           nametable += nameentrysize * (use_pcre16 ? 2 : 1);
+ #else
+           fprintf(outfile, "%3d\n", GET2(nametable, 0));
+ #ifdef SUPPORT_PCRE8
            nametable += nameentrysize;
+ #else
+           nametable += nameentrysize * 2;
+ #endif
+ #endif
            }
          }
+       if (!okpartial) fprintf(outfile, "Partial matching not supported\n");
+       if (hascrorlf) fprintf(outfile, "Contains explicit CR or LF match\n");
+       all_options = ((REAL_PCRE *)re)->options;
+       if (do_flip) all_options = swap_uint32(all_options);
        if (get_options == 0) fprintf(outfile, "No options\n");
-         else fprintf(outfile, "Options:%s%s%s%s%s%s%s%s%s\n",
+         else fprintf(outfile, "Options:%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
            ((get_options & PCRE_ANCHORED) != 0)? " anchored" : "",
            ((get_options & PCRE_CASELESS) != 0)? " caseless" : "",
            ((get_options & PCRE_EXTENDED) != 0)? " extended" : "",
            ((get_options & PCRE_MULTILINE) != 0)? " multiline" : "",
+           ((get_options & PCRE_FIRSTLINE) != 0)? " firstline" : "",
            ((get_options & PCRE_DOTALL) != 0)? " dotall" : "",
+           ((get_options & PCRE_BSR_ANYCRLF) != 0)? " bsr_anycrlf" : "",
+           ((get_options & PCRE_BSR_UNICODE) != 0)? " bsr_unicode" : "",
            ((get_options & PCRE_DOLLAR_ENDONLY) != 0)? " dollar_endonly" : "",
            ((get_options & PCRE_EXTRA) != 0)? " extra" : "",
            ((get_options & PCRE_UNGREEDY) != 0)? " ungreedy" : "",
-           ((get_options & PCRE_UTF8) != 0)? " utf8" : "");
+           ((get_options & PCRE_NO_AUTO_CAPTURE) != 0)? " no_auto_capture" : "",
+           ((get_options & PCRE_UTF8) != 0)? " utf" : "",
+           ((get_options & PCRE_UCP) != 0)? " ucp" : "",
+           ((get_options & PCRE_NO_UTF8_CHECK) != 0)? " no_utf_check" : "",
+           ((get_options & PCRE_NO_START_OPTIMIZE) != 0)? " no_start_optimize" : "",
+           ((get_options & PCRE_DUPNAMES) != 0)? " dupnames" : "");
+       if (jchanged) fprintf(outfile, "Duplicate name status changes\n");
+       switch (get_options & PCRE_NEWLINE_BITS)
+         {
+         case PCRE_NEWLINE_CR:
+         fprintf(outfile, "Forced newline sequence: CR\n");
+         break;
-       if (((((real_pcre *)re)->options) & PCRE_ICHANGED) != 0)
+         case PCRE_NEWLINE_LF:
-         fprintf(outfile, "Case state changes\n");
+         fprintf(outfile, "Forced newline sequence: LF\n");
+         break;
+         case PCRE_NEWLINE_CRLF:
+         fprintf(outfile, "Forced newline sequence: CRLF\n");
+         break;
+         case PCRE_NEWLINE_ANYCRLF:
+         fprintf(outfile, "Forced newline sequence: ANYCRLF\n");
+         break;
+         case PCRE_NEWLINE_ANY:
+         fprintf(outfile, "Forced newline sequence: ANY\n");
+         break;
+         default:
+         break;
+         }
        if (first_char == -1)
          {
-         fprintf(outfile, "First char at start or follows \\n\n");
+         fprintf(outfile, "First char at start or follows newline\n");
          }
        else if (first_char < 0)
          {
-Line 802 
 while (!done)
+Line 3182 
 while (!done)
          }
        else
          {
-         int ch = first_char & 255;
+         const char *caseless =
-         char *caseless = ((first_char & REQ_CASELESS) == 0)?
+           ((((REAL_PCRE *)re)->flags & PCRE_FCH_CASELESS) == 0)?
            "" : " (caseless)";
-         if (isprint(ch))
-           fprintf(outfile, "First char = \'%c\'%s\n", ch, caseless);
+         if (PRINTOK(first_char))
+           fprintf(outfile, "First char = \'%c\'%s\n", first_char, caseless);
          else
-           fprintf(outfile, "First char = %d%s\n", ch, caseless);
+           {
+           fprintf(outfile, "First char = ");
+           pchar(first_char, outfile);
+           fprintf(outfile, "%s\n", caseless);
+           }
          }
        if (need_char < 0)
-Line 817 
 while (!done)
+Line 3202 
 while (!done)
          }
        else
          {
-         int ch = need_char & 255;
+         const char *caseless =
-         char *caseless = ((need_char & REQ_CASELESS) == 0)?
+           ((((REAL_PCRE *)re)->flags & PCRE_RCH_CASELESS) == 0)?
            "" : " (caseless)";
-         if (isprint(ch))
-           fprintf(outfile, "Need char = \'%c\'%s\n", ch, caseless);
+         if (PRINTOK(need_char))
+           fprintf(outfile, "Need char = \'%c\'%s\n", need_char, caseless);
+         else
+           {
+           fprintf(outfile, "Need char = ");
+           pchar(need_char, outfile);
+           fprintf(outfile, "%s\n", caseless);
+           }
+         }
+       /* Don't output study size; at present it is in any case a fixed
+       value, but it varies, depending on the computer architecture, and
+       so messes up the test suite. (And with the /F option, it might be
+       flipped.) If study was forced by an external -s, don't show this
+       information unless -i or -d was also present. This means that, except
+       when auto-callouts are involved, the output from runs with and without
+       -s should be identical. */
+       if (do_study || (force_study >= 0 && showinfo && !no_force_study))
+         {
+         if (extra == NULL)
+           fprintf(outfile, "Study returned NULL\n");
          else
-           fprintf(outfile, "Need char = %d%s\n", ch, caseless);
+           {
+           pcre_uint8 *start_bits = NULL;
+           int minlength;
+           if (new_info(re, extra, PCRE_INFO_MINLENGTH, &minlength) == 0)
+             fprintf(outfile, "Subject length lower bound = %d\n", minlength);
+           if (new_info(re, extra, PCRE_INFO_FIRSTTABLE, &start_bits) == 0)
+             {
+             if (start_bits == NULL)
+               fprintf(outfile, "No set of starting bytes\n");
+             else
+               {
+               int i;
+               int c = 24;
+               fprintf(outfile, "Starting byte set: ");
+               for (i = 0; i < 256; i++)
+                 {
+                 if ((start_bits[i/8] & (1<<(i&7))) != 0)
+                   {
+                   if (c > 75)
+                     {
+                     fprintf(outfile, "\n  ");
+                     c = 2;
+                     }
+                   if (PRINTOK(i) && i != ' ')
+                     {
+                     fprintf(outfile, "%c ", i);
+                     c += 2;
+                     }
+                   else
+                     {
+                     fprintf(outfile, "\\x%02x ", i);
+                     c += 5;
+                     }
+                   }
+                 }
+               fprintf(outfile, "\n");
+               }
+             }
+           }
+         /* Show this only if the JIT was set by /S, not by -s. */
+         if ((study_options & PCRE_STUDY_JIT_COMPILE) != 0)
+           {
+           int jit;
+           if (new_info(re, extra, PCRE_INFO_JIT, &jit) == 0)
+             {
+             if (jit)
+               fprintf(outfile, "JIT study was successful\n");
+             else
+ #ifdef SUPPORT_JIT
+               fprintf(outfile, "JIT study was not successful\n");
+ #else
+               fprintf(outfile, "JIT support is not available in this version of PCRE\n");
+ #endif
+             }
+           }
          }
        }
-     /* If /S was present, study the regexp to generate additional info to
+     /* If the '>' option was present, we write out the regex to a file, and
-     help with the matching. */
+     that is all. The first 8 bytes of the file are the regex length and then
+     the study length, in big-endian order. */
-     if (do_study)
+     if (to_file != NULL)
        {
-       if (timeit)
+       FILE *f = fopen((char *)to_file, "wb");
+       if (f == NULL)
          {
-         register int i;
+         fprintf(outfile, "Unable to open %s: %s\n", to_file, strerror(errno));
-         clock_t time_taken;
-         clock_t start_time = clock();
-         for (i = 0; i < LOOPREPEAT; i++)
-           extra = pcre_study(re, study_options, &error);
-         time_taken = clock() - start_time;
-         if (extra != NULL) free(extra);
-         fprintf(outfile, "  Study time %.3f milliseconds\n",
-           (((double)time_taken * 1000.0) / (double)LOOPREPEAT) /
-             (double)CLOCKS_PER_SEC);
          }
+       else
+         {
+         pcre_uint8 sbuf[8];
-       extra = pcre_study(re, study_options, &error);
+         if (do_flip) regexflip(re, extra);
-       if (error != NULL)
+         sbuf[0] = (pcre_uint8)((true_size >> 24) & 255);
-         fprintf(outfile, "Failed to study: %s\n", error);
+         sbuf[1] = (pcre_uint8)((true_size >> 16) & 255);
-       else if (extra == NULL)
+         sbuf[2] = (pcre_uint8)((true_size >>  8) & 255);
-         fprintf(outfile, "Study returned NULL\n");
+         sbuf[3] = (pcre_uint8)((true_size) & 255);
+         sbuf[4] = (pcre_uint8)((true_study_size >> 24) & 255);
+         sbuf[5] = (pcre_uint8)((true_study_size >> 16) & 255);
+         sbuf[6] = (pcre_uint8)((true_study_size >>  8) & 255);
+         sbuf[7] = (pcre_uint8)((true_study_size) & 255);
-       else if (do_showinfo)
+         if (fwrite(sbuf, 1, 8, f) < 8 ||
-         {
+             fwrite(re, 1, true_size, f) < true_size)
-         size_t size;
+           {
-         uschar *start_bits = NULL;
+           fprintf(outfile, "Write error on %s: %s\n", to_file, strerror(errno));
-         new_info(re, extra, PCRE_INFO_STUDYSIZE, &size);
+           }
-         new_info(re, extra, PCRE_INFO_FIRSTTABLE, &start_bits);
-         fprintf(outfile, "Study size = %d\n", size);
-         if (start_bits == NULL)
-           fprintf(outfile, "No starting character set\n");
          else
            {
-           int i;
+           fprintf(outfile, "Compiled pattern written to %s\n", to_file);
-           int c = 24;
-           fprintf(outfile, "Starting character set: ");
+           /* If there is study data, write it. */
-           for (i = 0; i < 256; i++)
+           if (extra != NULL)
              {
-             if ((start_bits[i/8] & (1<<(i%8))) != 0)
+             if (fwrite(extra->study_data, 1, true_study_size, f) <
+                 true_study_size)
                {
-               if (c > 75)
+               fprintf(outfile, "Write error on %s: %s\n", to_file,
-                 {
+                 strerror(errno));
-                 fprintf(outfile, "\n  ");
-                 c = 2;
-                 }
-               if (isprint(i) && i != ' ')
-                 {
-                 fprintf(outfile, "%c ", i);
-                 c += 2;
-                 }
-               else
-                 {
-                 fprintf(outfile, "\\x%02x ", i);
-                 c += 5;
-                 }
                }
+             else fprintf(outfile, "Study data written to %s\n", to_file);
              }
-           fprintf(outfile, "\n");
            }
+         fclose(f);
+         }
+       new_free(re);
+       if (extra != NULL)
+         {
+         PCRE_FREE_STUDY(extra);
          }
+       if (locale_set)
+         {
+         new_free((void *)tables);
+         setlocale(LC_CTYPE, "C");
+         locale_set = 0;
+         }
+       continue;  /* With next regex */
        }
-     }
+     }        /* End of non-POSIX compile */
    /* Read data lines and test them */
    for (;;)
      {
-     unsigned char *q;
+     pcre_uint8 *q;
-     unsigned char *bptr = dbuffer;
+     pcre_uint8 *bptr;
      int *use_offsets = offsets;
      int use_size_offsets = size_offsets;
      int callout_data = 0;
      int callout_data_set = 0;
      int count, c;
      int copystrings = 0;
-     int find_match_limit = 0;
+     int find_match_limit = default_find_match_limit;
      int getstrings = 0;
      int getlist = 0;
      int gmatched = 0;
      int start_offset = 0;
+     int start_offset_sign = 1;
      int g_notempty = 0;
+     int use_dfa = 0;
-     options = 0;
+     *copynames = 0;
+     *getnames = 0;
-     pcre_callout = callout;
+ #ifdef SUPPORT_PCRE16
+     cn16ptr = copynames;
+     gn16ptr = getnames;
+ #endif
+ #ifdef SUPPORT_PCRE8
+     cn8ptr = copynames8;
+     gn8ptr = getnames8;
+ #endif
+     SET_PCRE_CALLOUT(callout);
      first_callout = 1;
+     last_callout_mark = NULL;
      callout_extra = 0;
      callout_count = 0;
      callout_fail_count = 999999;
      callout_fail_id = -1;
+     show_malloc = 0;
+     options = 0;
-     if (infile == stdin) printf("data> ");
+     if (extra != NULL) extra->flags &=
-     if (fgets((char *)buffer, sizeof(buffer), infile) == NULL)
+       ~(PCRE_EXTRA_MATCH_LIMIT|PCRE_EXTRA_MATCH_LIMIT_RECURSION);
-       {
-       done = 1;
+     len = 0;
-       goto CONTINUE;
+     for (;;)
+       {
+       if (extend_inputline(infile, buffer + len, "data> ") == NULL)
+         {
+         if (len > 0)    /* Reached EOF without hitting a newline */
+           {
+           fprintf(outfile, "\n");
+           break;
+           }
+         done = 1;
+         goto CONTINUE;
+         }
+       if (infile != stdin) fprintf(outfile, "%s", (char *)buffer);
+       len = (int)strlen((char *)buffer);
+       if (buffer[len-1] == '\n') break;
        }
-     if (infile != stdin) fprintf(outfile, "%s", (char *)buffer);
-     len = (int)strlen((char *)buffer);
      while (len > 0 && isspace(buffer[len-1])) len--;
      buffer[len] = 0;
      if (len == 0) break;
-Line 937 
 while (!done)
+Line 3427 
 while (!done)
      p = buffer;
      while (isspace(*p)) p++;
-     q = dbuffer;
+     bptr = q = dbuffer;
      while ((c = *p++) != 0)
        {
        int i = 0;
        int n = 0;
-       if (c == '\\') switch ((c = *p++))
+       /* In UTF mode, input can be UTF-8, so just copy all non-backslash bytes.
+       In non-UTF mode, allow the value of the byte to fall through to later,
+       where values greater than 127 are turned into UTF-8 when running in
+-bit mode. */
+       if (c != '\\')
+         {
+         if (use_utf)
+           {
+           *q++ = c;
+           continue;
+           }
+         }
+       /* Handle backslash escapes */
+       else switch ((c = *p++))
          {
          case 'a': c =    7; break;
          case 'b': c = '\b'; break;
-Line 962 
 while (!done)
+Line 3468 
 while (!done)
          break;
          case 'x':
-         /* Handle \x{..} specially - new Perl thing for utf8 */
          if (*p == '{')
            {
-           unsigned char *pt = p;
+           pcre_uint8 *pt = p;
            c = 0;
-           while (isxdigit(*(++pt)))
-             c = c * 16 + tolower(*pt) - ((isdigit(*pt))? '0' : 'W');
+           /* We used to have "while (isxdigit(*(++pt)))" here, but it fails
+           when isxdigit() is a macro that refers to its argument more than
+           once. This is banned by the C Standard, but apparently happens in at
+           least one MacOS environment. */
+           for (pt++; isxdigit(*pt); pt++)
+             {
+             if (++i == 9)
+               fprintf(outfile, "** Too many hex digits in \\x{...} item; "
+                                "using only the first eight.\n");
+             else c = c * 16 + tolower(*pt) - ((isdigit(*pt))? '0' : 'a' - 10);
+             }
            if (*pt == '}')
              {
-             unsigned char buffer[8];
-             int ii, utn;
-             utn = ord2utf8(c, buffer);
-             for (ii = 0; ii < utn - 1; ii++) *q++ = buffer[ii];
-             c = buffer[ii];   /* Last byte */
              p = pt + 1;
              break;
              }
-           /* Not correct form; fall through */
+           /* Not correct form for \x{...}; fall through */
            }
-         /* Ordinary \x */
+         /* \x without {} always defines just one byte in 8-bit mode. This
+         allows UTF-8 characters to be constructed byte by byte, and also allows
+         invalid UTF-8 sequences to be made. Just copy the byte in UTF mode.
+         Otherwise, pass it down to later code so that it can be turned into
+         UTF-8 when running in 16-bit mode. */
          c = 0;
          while (i++ < 2 && isxdigit(*p))
            {
-           c = c * 16 + tolower(*p) - ((isdigit(*p))? '0' : 'W');
+           c = c * 16 + tolower(*p) - ((isdigit(*p))? '0' : 'a' - 10);
            p++;
            }
+         if (use_utf)
+           {
+           *q++ = c;
+           continue;
+           }
          break;
-         case 0:   /* Allows for an empty line */
+         case 0:   /* \ followed by EOF allows for an empty line */
          p--;
          continue;
+         case '>':
+         if (*p == '-')
+           {
+           start_offset_sign = -1;
+           p++;
+           }
+         while(isdigit(*p)) start_offset = start_offset * 10 + *p++ - '0';
+         start_offset *= start_offset_sign;
+         continue;
          case 'A':  /* Option setting */
          options |= PCRE_ANCHORED;
          continue;
-Line 1014 
 while (!done)
+Line 3542 
 while (!done)
            }
          else if (isalnum(*p))
            {
-           uschar name[256];
+           READ_CAPTURE_NAME(p, &cn8ptr, &cn16ptr, re);
-           uschar *pp = name;
-           while (isalnum(*p)) *pp++ = *p++;
-           *pp = 0;
-           n = pcre_get_stringnumber(re, (char *)name);
-           if (n < 0)
-             fprintf(outfile, "no parentheses with name \"%s\"\n", name);
-           else copystrings |= 1 << n;
            }
          else if (*p == '+')
            {
-Line 1030 
 while (!done)
+Line 3551 
 while (!done)
            }
          else if (*p == '-')
            {
-           pcre_callout = NULL;
+           SET_PCRE_CALLOUT(NULL);
            p++;
            }
          else if (*p == '!')
-Line 1059 
 while (!done)
+Line 3580 
 while (!done)
            }
          continue;
+ #if !defined NODFA
+         case 'D':
+ #if !defined NOPOSIX
+         if (posix || do_posix)
+           printf("** Can't use dfa matching in POSIX mode: \\D ignored\n");
+         else
+ #endif
+           use_dfa = 1;
+         continue;
+ #endif
+ #if !defined NODFA
+         case 'F':
+         options |= PCRE_DFA_SHORTEST;
+         continue;
+ #endif
          case 'G':
          if (isdigit(*p))
            {
-Line 1067 
 while (!done)
+Line 3605 
 while (!done)
            }
          else if (isalnum(*p))
            {
-           uschar name[256];
+           READ_CAPTURE_NAME(p, &gn8ptr, &gn16ptr, re);
-           uschar *pp = name;
+           }
-           while (isalnum(*p)) *pp++ = *p++;
+         continue;
-           *pp = 0;
-           n = pcre_get_stringnumber(re, (char *)name);
+         case 'J':
-           if (n < 0)
+         while(isdigit(*p)) n = n * 10 + *p++ - '0';
-             fprintf(outfile, "no parentheses with name \"%s\"\n", name);
+         if (extra != NULL
-           else getstrings |= 1 << n;
+             && (extra->flags & PCRE_EXTRA_EXECUTABLE_JIT) != 0
+             && extra->executable_jit != NULL)
+           {
+           if (jit_stack != NULL) { PCRE_JIT_STACK_FREE(jit_stack); }
+           jit_stack = PCRE_JIT_STACK_ALLOC(1, n * 1024);
+           PCRE_ASSIGN_JIT_STACK(extra, jit_callback, jit_stack);
            }
          continue;
-Line 1087 
 while (!done)
+Line 3630 
 while (!done)
          continue;
          case 'N':
-         options |= PCRE_NOTEMPTY;
+         if ((options & PCRE_NOTEMPTY) != 0)
+           options = (options & ~PCRE_NOTEMPTY) | PCRE_NOTEMPTY_ATSTART;
+         else
+           options |= PCRE_NOTEMPTY;
          continue;
          case 'O':
-Line 1096 
 while (!done)
+Line 3642 
 while (!done)
            {
            size_offsets_max = n;
            free(offsets);
-           use_offsets = offsets = malloc(size_offsets_max * sizeof(int));
+           use_offsets = offse