/[pcre]/code/trunk/pcreposix.c
ViewVC logotype

Contents of /code/trunk/pcreposix.c

Parent Directory Parent Directory | Revision Log Revision Log


Revision 964 - (show annotations) (download)
Fri May 4 13:03:39 2012 UTC (2 years, 2 months ago) by ph10
File MIME type: text/plain
File size: 15607 byte(s)
Check for overlong name in (*MARK) etc.

1 /*************************************************
2 * Perl-Compatible Regular Expressions *
3 *************************************************/
4
5 /* PCRE is a library of functions to support regular expressions whose syntax
6 and semantics are as close as possible to those of the Perl 5 language.
7
8 Written by Philip Hazel
9 Copyright (c) 1997-2012 University of Cambridge
10
11 -----------------------------------------------------------------------------
12 Redistribution and use in source and binary forms, with or without
13 modification, are permitted provided that the following conditions are met:
14
15 * Redistributions of source code must retain the above copyright notice,
16 this list of conditions and the following disclaimer.
17
18 * Redistributions in binary form must reproduce the above copyright
19 notice, this list of conditions and the following disclaimer in the
20 documentation and/or other materials provided with the distribution.
21
22 * Neither the name of the University of Cambridge nor the names of its
23 contributors may be used to endorse or promote products derived from
24 this software without specific prior written permission.
25
26 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
27 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
28 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
29 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
30 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
31 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
32 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
33 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
34 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
35 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
36 POSSIBILITY OF SUCH DAMAGE.
37 -----------------------------------------------------------------------------
38 */
39
40
41 /* This module is a wrapper that provides a POSIX API to the underlying PCRE
42 functions. */
43
44
45 #ifdef HAVE_CONFIG_H
46 #include "config.h"
47 #endif
48
49
50 /* Ensure that the PCREPOSIX_EXP_xxx macros are set appropriately for
51 compiling these functions. This must come before including pcreposix.h, where
52 they are set for an application (using these functions) if they have not
53 previously been set. */
54
55 #if defined(_WIN32) && !defined(PCRE_STATIC)
56 # define PCREPOSIX_EXP_DECL extern __declspec(dllexport)
57 # define PCREPOSIX_EXP_DEFN __declspec(dllexport)
58 #endif
59
60 /* We include pcre.h before pcre_internal.h so that the PCRE library functions
61 are declared as "import" for Windows by defining PCRE_EXP_DECL as "import".
62 This is needed even though pcre_internal.h itself includes pcre.h, because it
63 does so after it has set PCRE_EXP_DECL to "export" if it is not already set. */
64
65 #include "pcre.h"
66 #include "pcre_internal.h"
67 #include "pcreposix.h"
68
69
70 /* Table to translate PCRE compile time error codes into POSIX error codes. */
71
72 static const int eint[] = {
73 0, /* no error */
74 REG_EESCAPE, /* \ at end of pattern */
75 REG_EESCAPE, /* \c at end of pattern */
76 REG_EESCAPE, /* unrecognized character follows \ */
77 REG_BADBR, /* numbers out of order in {} quantifier */
78 /* 5 */
79 REG_BADBR, /* number too big in {} quantifier */
80 REG_EBRACK, /* missing terminating ] for character class */
81 REG_ECTYPE, /* invalid escape sequence in character class */
82 REG_ERANGE, /* range out of order in character class */
83 REG_BADRPT, /* nothing to repeat */
84 /* 10 */
85 REG_BADRPT, /* operand of unlimited repeat could match the empty string */
86 REG_ASSERT, /* internal error: unexpected repeat */
87 REG_BADPAT, /* unrecognized character after (? */
88 REG_BADPAT, /* POSIX named classes are supported only within a class */
89 REG_EPAREN, /* missing ) */
90 /* 15 */
91 REG_ESUBREG, /* reference to non-existent subpattern */
92 REG_INVARG, /* erroffset passed as NULL */
93 REG_INVARG, /* unknown option bit(s) set */
94 REG_EPAREN, /* missing ) after comment */
95 REG_ESIZE, /* parentheses nested too deeply */
96 /* 20 */
97 REG_ESIZE, /* regular expression too large */
98 REG_ESPACE, /* failed to get memory */
99 REG_EPAREN, /* unmatched parentheses */
100 REG_ASSERT, /* internal error: code overflow */
101 REG_BADPAT, /* unrecognized character after (?< */
102 /* 25 */
103 REG_BADPAT, /* lookbehind assertion is not fixed length */
104 REG_BADPAT, /* malformed number or name after (?( */
105 REG_BADPAT, /* conditional group contains more than two branches */
106 REG_BADPAT, /* assertion expected after (?( */
107 REG_BADPAT, /* (?R or (?[+-]digits must be followed by ) */
108 /* 30 */
109 REG_ECTYPE, /* unknown POSIX class name */
110 REG_BADPAT, /* POSIX collating elements are not supported */
111 REG_INVARG, /* this version of PCRE is not compiled with PCRE_UTF8 support */
112 REG_BADPAT, /* spare error */
113 REG_BADPAT, /* character value in \x{...} sequence is too large */
114 /* 35 */
115 REG_BADPAT, /* invalid condition (?(0) */
116 REG_BADPAT, /* \C not allowed in lookbehind assertion */
117 REG_EESCAPE, /* PCRE does not support \L, \l, \N, \U, or \u */
118 REG_BADPAT, /* number after (?C is > 255 */
119 REG_BADPAT, /* closing ) for (?C expected */
120 /* 40 */
121 REG_BADPAT, /* recursive call could loop indefinitely */
122 REG_BADPAT, /* unrecognized character after (?P */
123 REG_BADPAT, /* syntax error in subpattern name (missing terminator) */
124 REG_BADPAT, /* two named subpatterns have the same name */
125 REG_BADPAT, /* invalid UTF-8 string */
126 /* 45 */
127 REG_BADPAT, /* support for \P, \p, and \X has not been compiled */
128 REG_BADPAT, /* malformed \P or \p sequence */
129 REG_BADPAT, /* unknown property name after \P or \p */
130 REG_BADPAT, /* subpattern name is too long (maximum 32 characters) */
131 REG_BADPAT, /* too many named subpatterns (maximum 10,000) */
132 /* 50 */
133 REG_BADPAT, /* repeated subpattern is too long */
134 REG_BADPAT, /* octal value is greater than \377 (not in UTF-8 mode) */
135 REG_BADPAT, /* internal error: overran compiling workspace */
136 REG_BADPAT, /* internal error: previously-checked referenced subpattern not found */
137 REG_BADPAT, /* DEFINE group contains more than one branch */
138 /* 55 */
139 REG_BADPAT, /* repeating a DEFINE group is not allowed */
140 REG_INVARG, /* inconsistent NEWLINE options */
141 REG_BADPAT, /* \g is not followed followed by an (optionally braced) non-zero number */
142 REG_BADPAT, /* a numbered reference must not be zero */
143 REG_BADPAT, /* an argument is not allowed for (*ACCEPT), (*FAIL), or (*COMMIT) */
144 /* 60 */
145 REG_BADPAT, /* (*VERB) not recognized */
146 REG_BADPAT, /* number is too big */
147 REG_BADPAT, /* subpattern name expected */
148 REG_BADPAT, /* digit expected after (?+ */
149 REG_BADPAT, /* ] is an invalid data character in JavaScript compatibility mode */
150 /* 65 */
151 REG_BADPAT, /* different names for subpatterns of the same number are not allowed */
152 REG_BADPAT, /* (*MARK) must have an argument */
153 REG_INVARG, /* this version of PCRE is not compiled with PCRE_UCP support */
154 REG_BADPAT, /* \c must be followed by an ASCII character */
155 REG_BADPAT, /* \k is not followed by a braced, angle-bracketed, or quoted name */
156 /* 70 */
157 REG_BADPAT, /* internal error: unknown opcode in find_fixedlength() */
158 REG_BADPAT, /* \N is not supported in a class */
159 REG_BADPAT, /* too many forward references */
160 REG_BADPAT, /* disallowed UTF-8/16 code point (>= 0xd800 && <= 0xdfff) */
161 REG_BADPAT, /* invalid UTF-16 string (should not occur) */
162 /* 75 */
163 REG_BADPAT /* overlong MARK name */
164 };
165
166 /* Table of texts corresponding to POSIX error codes */
167
168 static const char *const pstring[] = {
169 "", /* Dummy for value 0 */
170 "internal error", /* REG_ASSERT */
171 "invalid repeat counts in {}", /* BADBR */
172 "pattern error", /* BADPAT */
173 "? * + invalid", /* BADRPT */
174 "unbalanced {}", /* EBRACE */
175 "unbalanced []", /* EBRACK */
176 "collation error - not relevant", /* ECOLLATE */
177 "bad class", /* ECTYPE */
178 "bad escape sequence", /* EESCAPE */
179 "empty expression", /* EMPTY */
180 "unbalanced ()", /* EPAREN */
181 "bad range inside []", /* ERANGE */
182 "expression too big", /* ESIZE */
183 "failed to get memory", /* ESPACE */
184 "bad back reference", /* ESUBREG */
185 "bad argument", /* INVARG */
186 "match failed" /* NOMATCH */
187 };
188
189
190
191
192 /*************************************************
193 * Translate error code to string *
194 *************************************************/
195
196 PCREPOSIX_EXP_DEFN size_t PCRE_CALL_CONVENTION
197 regerror(int errcode, const regex_t *preg, char *errbuf, size_t errbuf_size)
198 {
199 const char *message, *addmessage;
200 size_t length, addlength;
201
202 message = (errcode >= (int)(sizeof(pstring)/sizeof(char *)))?
203 "unknown error code" : pstring[errcode];
204 length = strlen(message) + 1;
205
206 addmessage = " at offset ";
207 addlength = (preg != NULL && (int)preg->re_erroffset != -1)?
208 strlen(addmessage) + 6 : 0;
209
210 if (errbuf_size > 0)
211 {
212 if (addlength > 0 && errbuf_size >= length + addlength)
213 sprintf(errbuf, "%s%s%-6d", message, addmessage, (int)preg->re_erroffset);
214 else
215 {
216 strncpy(errbuf, message, errbuf_size - 1);
217 errbuf[errbuf_size-1] = 0;
218 }
219 }
220
221 return length + addlength;
222 }
223
224
225
226
227 /*************************************************
228 * Free store held by a regex *
229 *************************************************/
230
231 PCREPOSIX_EXP_DEFN void PCRE_CALL_CONVENTION
232 regfree(regex_t *preg)
233 {
234 (PUBL(free))(preg->re_pcre);
235 }
236
237
238
239
240 /*************************************************
241 * Compile a regular expression *
242 *************************************************/
243
244 /*
245 Arguments:
246 preg points to a structure for recording the compiled expression
247 pattern the pattern to compile
248 cflags compilation flags
249
250 Returns: 0 on success
251 various non-zero codes on failure
252 */
253
254 PCREPOSIX_EXP_DEFN int PCRE_CALL_CONVENTION
255 regcomp(regex_t *preg, const char *pattern, int cflags)
256 {
257 const char *errorptr;
258 int erroffset;
259 int errorcode;
260 int options = 0;
261
262 if ((cflags & REG_ICASE) != 0) options |= PCRE_CASELESS;
263 if ((cflags & REG_NEWLINE) != 0) options |= PCRE_MULTILINE;
264 if ((cflags & REG_DOTALL) != 0) options |= PCRE_DOTALL;
265 if ((cflags & REG_NOSUB) != 0) options |= PCRE_NO_AUTO_CAPTURE;
266 if ((cflags & REG_UTF8) != 0) options |= PCRE_UTF8;
267 if ((cflags & REG_UCP) != 0) options |= PCRE_UCP;
268 if ((cflags & REG_UNGREEDY) != 0) options |= PCRE_UNGREEDY;
269
270 preg->re_pcre = pcre_compile2(pattern, options, &errorcode, &errorptr,
271 &erroffset, NULL);
272 preg->re_erroffset = erroffset;
273
274 /* Safety: if the error code is too big for the translation vector (which
275 should not happen, but we all make mistakes), return REG_BADPAT. */
276
277 if (preg->re_pcre == NULL)
278 {
279 return (errorcode < (int)(sizeof(eint)/sizeof(const int)))?
280 eint[errorcode] : REG_BADPAT;
281 }
282
283 (void)pcre_fullinfo((const pcre *)preg->re_pcre, NULL, PCRE_INFO_CAPTURECOUNT,
284 &(preg->re_nsub));
285 return 0;
286 }
287
288
289
290
291 /*************************************************
292 * Match a regular expression *
293 *************************************************/
294
295 /* Unfortunately, PCRE requires 3 ints of working space for each captured
296 substring, so we have to get and release working store instead of just using
297 the POSIX structures as was done in earlier releases when PCRE needed only 2
298 ints. However, if the number of possible capturing brackets is small, use a
299 block of store on the stack, to reduce the use of malloc/free. The threshold is
300 in a macro that can be changed at configure time.
301
302 If REG_NOSUB was specified at compile time, the PCRE_NO_AUTO_CAPTURE flag will
303 be set. When this is the case, the nmatch and pmatch arguments are ignored, and
304 the only result is yes/no/error. */
305
306 PCREPOSIX_EXP_DEFN int PCRE_CALL_CONVENTION
307 regexec(const regex_t *preg, const char *string, size_t nmatch,
308 regmatch_t pmatch[], int eflags)
309 {
310 int rc, so, eo;
311 int options = 0;
312 int *ovector = NULL;
313 int small_ovector[POSIX_MALLOC_THRESHOLD * 3];
314 BOOL allocated_ovector = FALSE;
315 BOOL nosub =
316 (((const pcre *)preg->re_pcre)->options & PCRE_NO_AUTO_CAPTURE) != 0;
317
318 if ((eflags & REG_NOTBOL) != 0) options |= PCRE_NOTBOL;
319 if ((eflags & REG_NOTEOL) != 0) options |= PCRE_NOTEOL;
320 if ((eflags & REG_NOTEMPTY) != 0) options |= PCRE_NOTEMPTY;
321
322 ((regex_t *)preg)->re_erroffset = (size_t)(-1); /* Only has meaning after compile */
323
324 /* When no string data is being returned, or no vector has been passed in which
325 to put it, ensure that nmatch is zero. Otherwise, ensure the vector for holding
326 the return data is large enough. */
327
328 if (nosub || pmatch == NULL) nmatch = 0;
329
330 else if (nmatch > 0)
331 {
332 if (nmatch <= POSIX_MALLOC_THRESHOLD)
333 {
334 ovector = &(small_ovector[0]);
335 }
336 else
337 {
338 if (nmatch > INT_MAX/(sizeof(int) * 3)) return REG_ESPACE;
339 ovector = (int *)malloc(sizeof(int) * nmatch * 3);
340 if (ovector == NULL) return REG_ESPACE;
341 allocated_ovector = TRUE;
342 }
343 }
344
345 /* REG_STARTEND is a BSD extension, to allow for non-NUL-terminated strings.
346 The man page from OS X says "REG_STARTEND affects only the location of the
347 string, not how it is matched". That is why the "so" value is used to bump the
348 start location rather than being passed as a PCRE "starting offset". */
349
350 if ((eflags & REG_STARTEND) != 0)
351 {
352 so = pmatch[0].rm_so;
353 eo = pmatch[0].rm_eo;
354 }
355 else
356 {
357 so = 0;
358 eo = (int)strlen(string);
359 }
360
361 rc = pcre_exec((const pcre *)preg->re_pcre, NULL, string + so, (eo - so),
362 0, options, ovector, (int)(nmatch * 3));
363
364 if (rc == 0) rc = (int)nmatch; /* All captured slots were filled in */
365
366 /* Successful match */
367
368 if (rc >= 0)
369 {
370 size_t i;
371 if (!nosub)
372 {
373 for (i = 0; i < (size_t)rc; i++)
374 {
375 pmatch[i].rm_so = ovector[i*2];
376 pmatch[i].rm_eo = ovector[i*2+1];
377 }
378 if (allocated_ovector) free(ovector);
379 for (; i < nmatch; i++) pmatch[i].rm_so = pmatch[i].rm_eo = -1;
380 }
381 return 0;
382 }
383
384 /* Unsuccessful match */
385
386 if (allocated_ovector) free(ovector);
387 switch(rc)
388 {
389 /* ========================================================================== */
390 /* These cases are never obeyed. This is a fudge that causes a compile-time
391 error if the vector eint, which is indexed by compile-time error number, is
392 not the correct length. It seems to be the only way to do such a check at
393 compile time, as the sizeof() operator does not work in the C preprocessor.
394 As all the PCRE_ERROR_xxx values are negative, we can use 0 and 1. */
395
396 case 0:
397 case (sizeof(eint)/sizeof(int) == ERRCOUNT):
398 return REG_ASSERT;
399 /* ========================================================================== */
400
401 case PCRE_ERROR_NOMATCH: return REG_NOMATCH;
402 case PCRE_ERROR_NULL: return REG_INVARG;
403 case PCRE_ERROR_BADOPTION: return REG_INVARG;
404 case PCRE_ERROR_BADMAGIC: return REG_INVARG;
405 case PCRE_ERROR_UNKNOWN_NODE: return REG_ASSERT;
406 case PCRE_ERROR_NOMEMORY: return REG_ESPACE;
407 case PCRE_ERROR_MATCHLIMIT: return REG_ESPACE;
408 case PCRE_ERROR_BADUTF8: return REG_INVARG;
409 case PCRE_ERROR_BADUTF8_OFFSET: return REG_INVARG;
410 case PCRE_ERROR_BADMODE: return REG_INVARG;
411 default: return REG_ASSERT;
412 }
413 }
414
415 /* End of pcreposix.c */

Properties

Name Value
svn:eol-style native
svn:keywords "Author Date Id Revision Url"

webmaster@exim.org
ViewVC Help
Powered by ViewVC 1.1.12