/[pcre]/code/trunk/pcre_internal.h
ViewVC logotype

Diff of /code/trunk/pcre_internal.h

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 406 by ph10, Mon Mar 23 12:05:43 2009 UTC revision 576 by ph10, Sun Nov 21 18:45:10 2010 UTC
# Line 7  Line 7 
7  and semantics are as close as possible to those of the Perl 5 language.  and semantics are as close as possible to those of the Perl 5 language.
8    
9                         Written by Philip Hazel                         Written by Philip Hazel
10             Copyright (c) 1997-2009 University of Cambridge             Copyright (c) 1997-2010 University of Cambridge
11    
12  -----------------------------------------------------------------------------  -----------------------------------------------------------------------------
13  Redistribution and use in source and binary forms, with or without  Redistribution and use in source and binary forms, with or without
# Line 45  functions whose names all begin with "_p Line 45  functions whose names all begin with "_p
45  #ifndef PCRE_INTERNAL_H  #ifndef PCRE_INTERNAL_H
46  #define PCRE_INTERNAL_H  #define PCRE_INTERNAL_H
47    
48  /* Define DEBUG to get debugging output on stdout. */  /* Define PCRE_DEBUG to get debugging output on stdout. */
49    
50  #if 0  #if 0
51  #define DEBUG  #define PCRE_DEBUG
52  #endif  #endif
53    
54  /* We do not support both EBCDIC and UTF-8 at the same time. The "configure"  /* We do not support both EBCDIC and UTF-8 at the same time. The "configure"
# Line 74  It turns out that the Mac Debugging.h he Line 74  It turns out that the Mac Debugging.h he
74  be absolutely sure we get our version. */  be absolutely sure we get our version. */
75    
76  #undef DPRINTF  #undef DPRINTF
77  #ifdef DEBUG  #ifdef PCRE_DEBUG
78  #define DPRINTF(p) printf p  #define DPRINTF(p) printf p
79  #else  #else
80  #define DPRINTF(p) /* Nothing */  #define DPRINTF(p) /* Nothing */
# Line 86  setjmp and stdarg are used is when NO_RE Line 86  setjmp and stdarg are used is when NO_RE
86    
87  #include <ctype.h>  #include <ctype.h>
88  #include <limits.h>  #include <limits.h>
 #include <setjmp.h>  
 #include <stdarg.h>  
89  #include <stddef.h>  #include <stddef.h>
90  #include <stdio.h>  #include <stdio.h>
91  #include <stdlib.h>  #include <stdlib.h>
# Line 186  preprocessor time in standard C environm Line 184  preprocessor time in standard C environm
184    #error Cannot determine a type for 32-bit unsigned integers    #error Cannot determine a type for 32-bit unsigned integers
185  #endif  #endif
186    
187    /* When checking for integer overflow in pcre_compile(), we need to handle
188    large integers. If a 64-bit integer type is available, we can use that.
189    Otherwise we have to cast to double, which of course requires floating point
190    arithmetic. Handle this by defining a macro for the appropriate type. If
191    stdint.h is available, include it; it may define INT64_MAX. Systems that do not
192    have stdint.h (e.g. Solaris) may have inttypes.h. The macro int64_t may be set
193    by "configure". */
194    
195    #if HAVE_STDINT_H
196    #include <stdint.h>
197    #elif HAVE_INTTYPES_H
198    #include <inttypes.h>
199    #endif
200    
201    #if defined INT64_MAX || defined int64_t
202    #define INT64_OR_DOUBLE int64_t
203    #else
204    #define INT64_OR_DOUBLE double
205    #endif
206    
207  /* All character handling must be done as unsigned characters. Otherwise there  /* All character handling must be done as unsigned characters. Otherwise there
208  are problems with top-bit-set characters and functions such as isspace().  are problems with top-bit-set characters and functions such as isspace().
209  However, we leave the interface to the outside world as char *, because that  However, we leave the interface to the outside world as char *, because that
# Line 390  capturing parenthesis numbers in back re Line 408  capturing parenthesis numbers in back re
408    
409  /* When UTF-8 encoding is being used, a character is no longer just a single  /* When UTF-8 encoding is being used, a character is no longer just a single
410  byte. The macros for character handling generate simple sequences when used in  byte. The macros for character handling generate simple sequences when used in
411  byte-mode, and more complicated ones for UTF-8 characters. BACKCHAR should  byte-mode, and more complicated ones for UTF-8 characters. GETCHARLENTEST is
412  never be called in byte mode. To make sure it can never even appear when UTF-8  not used when UTF-8 is not supported, so it is not defined, and BACKCHAR should
413  support is omitted, we don't even define it. */  never be called in byte mode. To make sure they can never even appear when
414    UTF-8 support is omitted, we don't even define them. */
415    
416  #ifndef SUPPORT_UTF8  #ifndef SUPPORT_UTF8
417  #define GETCHAR(c, eptr) c = *eptr;  #define GETCHAR(c, eptr) c = *eptr;
# Line 400  support is omitted, we don't even define Line 419  support is omitted, we don't even define
419  #define GETCHARINC(c, eptr) c = *eptr++;  #define GETCHARINC(c, eptr) c = *eptr++;
420  #define GETCHARINCTEST(c, eptr) c = *eptr++;  #define GETCHARINCTEST(c, eptr) c = *eptr++;
421  #define GETCHARLEN(c, eptr, len) c = *eptr;  #define GETCHARLEN(c, eptr, len) c = *eptr;
422    /* #define GETCHARLENTEST(c, eptr, len) */
423  /* #define BACKCHAR(eptr) */  /* #define BACKCHAR(eptr) */
424    
425  #else   /* SUPPORT_UTF8 */  #else   /* SUPPORT_UTF8 */
426    
427    /* These macros were originally written in the form of loops that used data
428    from the tables whose names start with _pcre_utf8_table. They were rewritten by
429    a user so as not to use loops, because in some environments this gives a
430    significant performance advantage, and it seems never to do any harm. */
431    
432    /* Base macro to pick up the remaining bytes of a UTF-8 character, not
433    advancing the pointer. */
434    
435    #define GETUTF8(c, eptr) \
436        { \
437        if ((c & 0x20) == 0) \
438          c = ((c & 0x1f) << 6) | (eptr[1] & 0x3f); \
439        else if ((c & 0x10) == 0) \
440          c = ((c & 0x0f) << 12) | ((eptr[1] & 0x3f) << 6) | (eptr[2] & 0x3f); \
441        else if ((c & 0x08) == 0) \
442          c = ((c & 0x07) << 18) | ((eptr[1] & 0x3f) << 12) | \
443          ((eptr[2] & 0x3f) << 6) | (eptr[3] & 0x3f); \
444        else if ((c & 0x04) == 0) \
445          c = ((c & 0x03) << 24) | ((eptr[1] & 0x3f) << 18) | \
446              ((eptr[2] & 0x3f) << 12) | ((eptr[3] & 0x3f) << 6) | \
447              (eptr[4] & 0x3f); \
448        else \
449          c = ((c & 0x01) << 30) | ((eptr[1] & 0x3f) << 24) | \
450              ((eptr[2] & 0x3f) << 18) | ((eptr[3] & 0x3f) << 12) | \
451              ((eptr[4] & 0x3f) << 6) | (eptr[5] & 0x3f); \
452        }
453    
454  /* Get the next UTF-8 character, not advancing the pointer. This is called when  /* Get the next UTF-8 character, not advancing the pointer. This is called when
455  we know we are in UTF-8 mode. */  we know we are in UTF-8 mode. */
456    
457  #define GETCHAR(c, eptr) \  #define GETCHAR(c, eptr) \
458    c = *eptr; \    c = *eptr; \
459    if (c >= 0xc0) \    if (c >= 0xc0) GETUTF8(c, eptr);
     { \  
     int gcii; \  
     int gcaa = _pcre_utf8_table4[c & 0x3f];  /* Number of additional bytes */ \  
     int gcss = 6*gcaa; \  
     c = (c & _pcre_utf8_table3[gcaa]) << gcss; \  
     for (gcii = 1; gcii <= gcaa; gcii++) \  
       { \  
       gcss -= 6; \  
       c |= (eptr[gcii] & 0x3f) << gcss; \  
       } \  
     }  
460    
461  /* Get the next UTF-8 character, testing for UTF-8 mode, and not advancing the  /* Get the next UTF-8 character, testing for UTF-8 mode, and not advancing the
462  pointer. */  pointer. */
463    
464  #define GETCHARTEST(c, eptr) \  #define GETCHARTEST(c, eptr) \
465    c = *eptr; \    c = *eptr; \
466    if (utf8 && c >= 0xc0) \    if (utf8 && c >= 0xc0) GETUTF8(c, eptr);
467    
468    /* Base macro to pick up the remaining bytes of a UTF-8 character, advancing
469    the pointer. */
470    
471    #define GETUTF8INC(c, eptr) \
472      { \      { \
473      int gcii; \      if ((c & 0x20) == 0) \
474      int gcaa = _pcre_utf8_table4[c & 0x3f];  /* Number of additional bytes */ \        c = ((c & 0x1f) << 6) | (*eptr++ & 0x3f); \
475      int gcss = 6*gcaa; \      else if ((c & 0x10) == 0) \
476      c = (c & _pcre_utf8_table3[gcaa]) << gcss; \        { \
477      for (gcii = 1; gcii <= gcaa; gcii++) \        c = ((c & 0x0f) << 12) | ((*eptr & 0x3f) << 6) | (eptr[1] & 0x3f); \
478          eptr += 2; \
479          } \
480        else if ((c & 0x08) == 0) \
481          { \
482          c = ((c & 0x07) << 18) | ((*eptr & 0x3f) << 12) | \
483              ((eptr[1] & 0x3f) << 6) | (eptr[2] & 0x3f); \
484          eptr += 3; \
485          } \
486        else if ((c & 0x04) == 0) \
487          { \
488          c = ((c & 0x03) << 24) | ((*eptr & 0x3f) << 18) | \
489              ((eptr[1] & 0x3f) << 12) | ((eptr[2] & 0x3f) << 6) | \
490              (eptr[3] & 0x3f); \
491          eptr += 4; \
492          } \
493        else \
494        { \        { \
495        gcss -= 6; \        c = ((c & 0x01) << 30) | ((*eptr & 0x3f) << 24) | \
496        c |= (eptr[gcii] & 0x3f) << gcss; \            ((eptr[1] & 0x3f) << 18) | ((eptr[2] & 0x3f) << 12) | \
497              ((eptr[3] & 0x3f) << 6) | (eptr[4] & 0x3f); \
498          eptr += 5; \
499        } \        } \
500      }      }
501    
# Line 445  know we are in UTF-8 mode. */ Line 504  know we are in UTF-8 mode. */
504    
505  #define GETCHARINC(c, eptr) \  #define GETCHARINC(c, eptr) \
506    c = *eptr++; \    c = *eptr++; \
507    if (c >= 0xc0) \    if (c >= 0xc0) GETUTF8INC(c, eptr);
     { \  
     int gcaa = _pcre_utf8_table4[c & 0x3f];  /* Number of additional bytes */ \  
     int gcss = 6*gcaa; \  
     c = (c & _pcre_utf8_table3[gcaa]) << gcss; \  
     while (gcaa-- > 0) \  
       { \  
       gcss -= 6; \  
       c |= (*eptr++ & 0x3f) << gcss; \  
       } \  
     }  
508    
509  /* Get the next character, testing for UTF-8 mode, and advancing the pointer */  /* Get the next character, testing for UTF-8 mode, and advancing the pointer.
510    This is called when we don't know if we are in UTF-8 mode. */
511    
512  #define GETCHARINCTEST(c, eptr) \  #define GETCHARINCTEST(c, eptr) \
513    c = *eptr++; \    c = *eptr++; \
514    if (utf8 && c >= 0xc0) \    if (utf8 && c >= 0xc0) GETUTF8INC(c, eptr);
515    
516    /* Base macro to pick up the remaining bytes of a UTF-8 character, not
517    advancing the pointer, incrementing the length. */
518    
519    #define GETUTF8LEN(c, eptr, len) \
520      { \      { \
521      int gcaa = _pcre_utf8_table4[c & 0x3f];  /* Number of additional bytes */ \      if ((c & 0x20) == 0) \
     int gcss = 6*gcaa; \  
     c = (c & _pcre_utf8_table3[gcaa]) << gcss; \  
     while (gcaa-- > 0) \  
522        { \        { \
523        gcss -= 6; \        c = ((c & 0x1f) << 6) | (eptr[1] & 0x3f); \
524        c |= (*eptr++ & 0x3f) << gcss; \        len++; \
525          } \
526        else if ((c & 0x10)  == 0) \
527          { \
528          c = ((c & 0x0f) << 12) | ((eptr[1] & 0x3f) << 6) | (eptr[2] & 0x3f); \
529          len += 2; \
530          } \
531        else if ((c & 0x08)  == 0) \
532          {\
533          c = ((c & 0x07) << 18) | ((eptr[1] & 0x3f) << 12) | \
534              ((eptr[2] & 0x3f) << 6) | (eptr[3] & 0x3f); \
535          len += 3; \
536          } \
537        else if ((c & 0x04)  == 0) \
538          { \
539          c = ((c & 0x03) << 24) | ((eptr[1] & 0x3f) << 18) | \
540              ((eptr[2] & 0x3f) << 12) | ((eptr[3] & 0x3f) << 6) | \
541              (eptr[4] & 0x3f); \
542          len += 4; \
543          } \
544        else \
545          {\
546          c = ((c & 0x01) << 30) | ((eptr[1] & 0x3f) << 24) | \
547              ((eptr[2] & 0x3f) << 18) | ((eptr[3] & 0x3f) << 12) | \
548              ((eptr[4] & 0x3f) << 6) | (eptr[5] & 0x3f); \
549          len += 5; \
550        } \        } \
551      }      }
552    
# Line 478  if there are extra bytes. This is called Line 555  if there are extra bytes. This is called
555    
556  #define GETCHARLEN(c, eptr, len) \  #define GETCHARLEN(c, eptr, len) \
557    c = *eptr; \    c = *eptr; \
558    if (c >= 0xc0) \    if (c >= 0xc0) GETUTF8LEN(c, eptr, len);
     { \  
     int gcii; \  
     int gcaa = _pcre_utf8_table4[c & 0x3f];  /* Number of additional bytes */ \  
     int gcss = 6*gcaa; \  
     c = (c & _pcre_utf8_table3[gcaa]) << gcss; \  
     for (gcii = 1; gcii <= gcaa; gcii++) \  
       { \  
       gcss -= 6; \  
       c |= (eptr[gcii] & 0x3f) << gcss; \  
       } \  
     len += gcaa; \  
     }  
559    
560  /* Get the next UTF-8 character, testing for UTF-8 mode, not advancing the  /* Get the next UTF-8 character, testing for UTF-8 mode, not advancing the
561  pointer, incrementing length if there are extra bytes. This is called when we  pointer, incrementing length if there are extra bytes. This is called when we
562  know we are in UTF-8 mode. */  do not know if we are in UTF-8 mode. */
563    
564  #define GETCHARLENTEST(c, eptr, len) \  #define GETCHARLENTEST(c, eptr, len) \
565    c = *eptr; \    c = *eptr; \
566    if (utf8 && c >= 0xc0) \    if (utf8 && c >= 0xc0) GETUTF8LEN(c, eptr, len);
     { \  
     int gcii; \  
     int gcaa = _pcre_utf8_table4[c & 0x3f];  /* Number of additional bytes */ \  
     int gcss = 6*gcaa; \  
     c = (c & _pcre_utf8_table3[gcaa]) << gcss; \  
     for (gcii = 1; gcii <= gcaa; gcii++) \  
       { \  
       gcss -= 6; \  
       c |= (eptr[gcii] & 0x3f) << gcss; \  
       } \  
     len += gcaa; \  
     }  
567    
568  /* If the pointer is not at the start of a character, move it back until  /* If the pointer is not at the start of a character, move it back until
569  it is. This is called only in UTF-8 mode - we don't put a test within the macro  it is. This is called only in UTF-8 mode - we don't put a test within the macro
# Line 518  because almost all calls are already wit Line 571  because almost all calls are already wit
571    
572  #define BACKCHAR(eptr) while((*eptr & 0xc0) == 0x80) eptr--  #define BACKCHAR(eptr) while((*eptr & 0xc0) == 0x80) eptr--
573    
574  #endif  #endif  /* SUPPORT_UTF8 */
575    
576    
577  /* In case there is no definition of offsetof() provided - though any proper  /* In case there is no definition of offsetof() provided - though any proper
# Line 535  Standard C system should have one. */ Line 588  Standard C system should have one. */
588    
589  /* Private flags containing information about the compiled regex. They used to  /* Private flags containing information about the compiled regex. They used to
590  live at the top end of the options word, but that got almost full, so now they  live at the top end of the options word, but that got almost full, so now they
591  are in a 16-bit flags word. */  are in a 16-bit flags word. From release 8.00, PCRE_NOPARTIAL is unused, as
592    the restrictions on partial matching have been lifted. It remains for backwards
593    compatibility. */
594    
595  #define PCRE_NOPARTIAL     0x0001  /* can't use partial with this regex */  #define PCRE_NOPARTIAL     0x0001  /* can't use partial with this regex */
596  #define PCRE_FIRSTSET      0x0002  /* first_byte is set */  #define PCRE_FIRSTSET      0x0002  /* first_byte is set */
# Line 547  are in a 16-bit flags word. */ Line 602  are in a 16-bit flags word. */
602  /* Options for the "extra" block produced by pcre_study(). */  /* Options for the "extra" block produced by pcre_study(). */
603    
604  #define PCRE_STUDY_MAPPED   0x01     /* a map of starting chars exists */  #define PCRE_STUDY_MAPPED   0x01     /* a map of starting chars exists */
605    #define PCRE_STUDY_MINLEN   0x02     /* a minimum length field exists */
606    
607  /* Masks for identifying the public options that are permitted at compile  /* Masks for identifying the public options that are permitted at compile
608  time, run time, or study time, respectively. */  time, run time, or study time, respectively. */
# Line 559  time, run time, or study time, respectiv Line 615  time, run time, or study time, respectiv
615     PCRE_DOTALL|PCRE_DOLLAR_ENDONLY|PCRE_EXTRA|PCRE_UNGREEDY|PCRE_UTF8| \     PCRE_DOTALL|PCRE_DOLLAR_ENDONLY|PCRE_EXTRA|PCRE_UNGREEDY|PCRE_UTF8| \
616     PCRE_NO_AUTO_CAPTURE|PCRE_NO_UTF8_CHECK|PCRE_AUTO_CALLOUT|PCRE_FIRSTLINE| \     PCRE_NO_AUTO_CAPTURE|PCRE_NO_UTF8_CHECK|PCRE_AUTO_CALLOUT|PCRE_FIRSTLINE| \
617     PCRE_DUPNAMES|PCRE_NEWLINE_BITS|PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE| \     PCRE_DUPNAMES|PCRE_NEWLINE_BITS|PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE| \
618     PCRE_JAVASCRIPT_COMPAT)     PCRE_JAVASCRIPT_COMPAT|PCRE_UCP|PCRE_NO_START_OPTIMIZE)
619    
620  #define PUBLIC_EXEC_OPTIONS \  #define PUBLIC_EXEC_OPTIONS \
621    (PCRE_ANCHORED|PCRE_NOTBOL|PCRE_NOTEOL|PCRE_NOTEMPTY|PCRE_NO_UTF8_CHECK| \    (PCRE_ANCHORED|PCRE_NOTBOL|PCRE_NOTEOL|PCRE_NOTEMPTY|PCRE_NOTEMPTY_ATSTART| \
622     PCRE_PARTIAL|PCRE_NEWLINE_BITS|PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE| \     PCRE_NO_UTF8_CHECK|PCRE_PARTIAL_HARD|PCRE_PARTIAL_SOFT|PCRE_NEWLINE_BITS| \
623     PCRE_NO_START_OPTIMIZE)     PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE|PCRE_NO_START_OPTIMIZE)
624    
625  #define PUBLIC_DFA_EXEC_OPTIONS \  #define PUBLIC_DFA_EXEC_OPTIONS \
626    (PCRE_ANCHORED|PCRE_NOTBOL|PCRE_NOTEOL|PCRE_NOTEMPTY|PCRE_NO_UTF8_CHECK| \    (PCRE_ANCHORED|PCRE_NOTBOL|PCRE_NOTEOL|PCRE_NOTEMPTY|PCRE_NOTEMPTY_ATSTART| \
627     PCRE_PARTIAL|PCRE_DFA_SHORTEST|PCRE_DFA_RESTART|PCRE_NEWLINE_BITS| \     PCRE_NO_UTF8_CHECK|PCRE_PARTIAL_HARD|PCRE_PARTIAL_SOFT|PCRE_DFA_SHORTEST| \
628     PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE|PCRE_NO_START_OPTIMIZE)     PCRE_DFA_RESTART|PCRE_NEWLINE_BITS|PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE| \
629       PCRE_NO_START_OPTIMIZE)
630    
631  #define PUBLIC_STUDY_OPTIONS 0   /* None defined */  #define PUBLIC_STUDY_OPTIONS 0   /* None defined */
632    
# Line 853  so that PCRE works on both ASCII and EBC Line 910  so that PCRE works on both ASCII and EBC
910  #define STRING_COMMIT0              "COMMIT\0"  #define STRING_COMMIT0              "COMMIT\0"
911  #define STRING_F0                   "F\0"  #define STRING_F0                   "F\0"
912  #define STRING_FAIL0                "FAIL\0"  #define STRING_FAIL0                "FAIL\0"
913    #define STRING_MARK0                "MARK\0"
914  #define STRING_PRUNE0               "PRUNE\0"  #define STRING_PRUNE0               "PRUNE\0"
915  #define STRING_SKIP0                "SKIP\0"  #define STRING_SKIP0                "SKIP\0"
916  #define STRING_THEN                 "THEN"  #define STRING_THEN                 "THEN"
# Line 874  so that PCRE works on both ASCII and EBC Line 932  so that PCRE works on both ASCII and EBC
932    
933  #define STRING_DEFINE               "DEFINE"  #define STRING_DEFINE               "DEFINE"
934    
935  #define STRING_CR_RIGHTPAR          "CR)"  #define STRING_CR_RIGHTPAR             "CR)"
936  #define STRING_LF_RIGHTPAR          "LF)"  #define STRING_LF_RIGHTPAR             "LF)"
937  #define STRING_CRLF_RIGHTPAR        "CRLF)"  #define STRING_CRLF_RIGHTPAR           "CRLF)"
938  #define STRING_ANY_RIGHTPAR         "ANY)"  #define STRING_ANY_RIGHTPAR            "ANY)"
939  #define STRING_ANYCRLF_RIGHTPAR     "ANYCRLF)"  #define STRING_ANYCRLF_RIGHTPAR        "ANYCRLF)"
940  #define STRING_BSR_ANYCRLF_RIGHTPAR "BSR_ANYCRLF)"  #define STRING_BSR_ANYCRLF_RIGHTPAR    "BSR_ANYCRLF)"
941  #define STRING_BSR_UNICODE_RIGHTPAR "BSR_UNICODE)"  #define STRING_BSR_UNICODE_RIGHTPAR    "BSR_UNICODE)"
942    #define STRING_UTF8_RIGHTPAR           "UTF8)"
943    #define STRING_UCP_RIGHTPAR            "UCP)"
944    #define STRING_NO_START_OPT_RIGHTPAR   "NO_START_OPT)"
945    
946  #else  /* SUPPORT_UTF8 */  #else  /* SUPPORT_UTF8 */
947    
# Line 1104  only. */ Line 1165  only. */
1165  #define STRING_COMMIT0              STR_C STR_O STR_M STR_M STR_I STR_T "\0"  #define STRING_COMMIT0              STR_C STR_O STR_M STR_M STR_I STR_T "\0"
1166  #define STRING_F0                   STR_F "\0"  #define STRING_F0                   STR_F "\0"
1167  #define STRING_FAIL0                STR_F STR_A STR_I STR_L "\0"  #define STRING_FAIL0                STR_F STR_A STR_I STR_L "\0"
1168    #define STRING_MARK0                STR_M STR_A STR_R STR_K "\0"
1169  #define STRING_PRUNE0               STR_P STR_R STR_U STR_N STR_E "\0"  #define STRING_PRUNE0               STR_P STR_R STR_U STR_N STR_E "\0"
1170  #define STRING_SKIP0                STR_S STR_K STR_I STR_P "\0"  #define STRING_SKIP0                STR_S STR_K STR_I STR_P "\0"
1171  #define STRING_THEN                 STR_T STR_H STR_E STR_N  #define STRING_THEN                 STR_T STR_H STR_E STR_N
# Line 1125  only. */ Line 1187  only. */
1187    
1188  #define STRING_DEFINE               STR_D STR_E STR_F STR_I STR_N STR_E  #define STRING_DEFINE               STR_D STR_E STR_F STR_I STR_N STR_E
1189    
1190  #define STRING_CR_RIGHTPAR          STR_C STR_R STR_RIGHT_PARENTHESIS  #define STRING_CR_RIGHTPAR             STR_C STR_R STR_RIGHT_PARENTHESIS
1191  #define STRING_LF_RIGHTPAR          STR_L STR_F STR_RIGHT_PARENTHESIS  #define STRING_LF_RIGHTPAR             STR_L STR_F STR_RIGHT_PARENTHESIS
1192  #define STRING_CRLF_RIGHTPAR        STR_C STR_R STR_L STR_F STR_RIGHT_PARENTHESIS  #define STRING_CRLF_RIGHTPAR           STR_C STR_R STR_L STR_F STR_RIGHT_PARENTHESIS
1193  #define STRING_ANY_RIGHTPAR         STR_A STR_N STR_Y STR_RIGHT_PARENTHESIS  #define STRING_ANY_RIGHTPAR            STR_A STR_N STR_Y STR_RIGHT_PARENTHESIS
1194  #define STRING_ANYCRLF_RIGHTPAR     STR_A STR_N STR_Y STR_C STR_R STR_L STR_F STR_RIGHT_PARENTHESIS  #define STRING_ANYCRLF_RIGHTPAR        STR_A STR_N STR_Y STR_C STR_R STR_L STR_F STR_RIGHT_PARENTHESIS
1195  #define STRING_BSR_ANYCRLF_RIGHTPAR STR_B STR_S STR_R STR_UNDERSCORE STR_A STR_N STR_Y STR_C STR_R STR_L STR_F STR_RIGHT_PARENTHESIS  #define STRING_BSR_ANYCRLF_RIGHTPAR    STR_B STR_S STR_R STR_UNDERSCORE STR_A STR_N STR_Y STR_C STR_R STR_L STR_F STR_RIGHT_PARENTHESIS
1196  #define STRING_BSR_UNICODE_RIGHTPAR STR_B STR_S STR_R STR_UNDERSCORE STR_U STR_N STR_I STR_C STR_O STR_D STR_E STR_RIGHT_PARENTHESIS  #define STRING_BSR_UNICODE_RIGHTPAR    STR_B STR_S STR_R STR_UNDERSCORE STR_U STR_N STR_I STR_C STR_O STR_D STR_E STR_RIGHT_PARENTHESIS
1197    #define STRING_UTF8_RIGHTPAR           STR_U STR_T STR_F STR_8 STR_RIGHT_PARENTHESIS
1198    #define STRING_UCP_RIGHTPAR            STR_U STR_C STR_P STR_RIGHT_PARENTHESIS
1199    #define STRING_NO_START_OPT_RIGHTPAR   STR_N STR_O STR_UNDERSCORE STR_S STR_T STR_A STR_R STR_T STR_UNDERSCORE STR_O STR_P STR_T STR_RIGHT_PARENTHESIS
1200    
1201  #endif  /* SUPPORT_UTF8 */  #endif  /* SUPPORT_UTF8 */
1202    
# Line 1164  only. */ Line 1229  only. */
1229    
1230  #define PT_ANY        0    /* Any property - matches all chars */  #define PT_ANY        0    /* Any property - matches all chars */
1231  #define PT_LAMP       1    /* L& - the union of Lu, Ll, Lt */  #define PT_LAMP       1    /* L& - the union of Lu, Ll, Lt */
1232  #define PT_GC         2    /* General characteristic (e.g. L) */  #define PT_GC         2    /* Specified general characteristic (e.g. L) */
1233  #define PT_PC         3    /* Particular characteristic (e.g. Lu) */  #define PT_PC         3    /* Specified particular characteristic (e.g. Lu) */
1234  #define PT_SC         4    /* Script (e.g. Han) */  #define PT_SC         4    /* Script (e.g. Han) */
1235    #define PT_ALNUM      5    /* Alphanumeric - the union of L and N */
1236    #define PT_SPACE      6    /* Perl space - Z plus 9,10,12,13 */
1237    #define PT_PXSPACE    7    /* POSIX space - Z plus 9,10,11,12,13 */
1238    #define PT_WORD       8    /* Word - L plus N plus underscore */
1239    
1240  /* Flag bits and data types for the extended class (OP_XCLASS) for classes that  /* Flag bits and data types for the extended class (OP_XCLASS) for classes that
1241  contain UTF-8 characters with values greater than 255. */  contain UTF-8 characters with values greater than 255. */
# Line 1183  contain UTF-8 characters with values gre Line 1252  contain UTF-8 characters with values gre
1252  /* These are escaped items that aren't just an encoding of a particular data  /* These are escaped items that aren't just an encoding of a particular data
1253  value such as \n. They must have non-zero values, as check_escape() returns  value such as \n. They must have non-zero values, as check_escape() returns
1254  their negation. Also, they must appear in the same order as in the opcode  their negation. Also, they must appear in the same order as in the opcode
1255  definitions below, up to ESC_z. There's a dummy for OP_ANY because it  definitions below, up to ESC_z. There's a dummy for OP_ALLANY because it
1256  corresponds to "." rather than an escape sequence, and another for OP_ALLANY  corresponds to "." in DOTALL mode rather than an escape sequence. It is also
1257  (which is used for [^] in JavaScript compatibility mode).  used for [^] in JavaScript compatibility mode. In non-DOTALL mode, "." behaves
1258    like \N.
1259    
1260    The special values ESC_DU, ESC_du, etc. are used instead of ESC_D, ESC_d, etc.
1261    when PCRE_UCP is set, when replacement of \d etc by \p sequences is required.
1262    They must be contiguous, and remain in order so that the replacements can be
1263    looked up from a table.
1264    
1265  The final escape must be ESC_REF as subsequent values are used for  The final escape must be ESC_REF as subsequent values are used for
1266  backreferences (\1, \2, \3, etc). There are two tests in the code for an escape  backreferences (\1, \2, \3, etc). There are two tests in the code for an escape
# Line 1195  put in between that don't consume a char Line 1270  put in between that don't consume a char
1270  */  */
1271    
1272  enum { ESC_A = 1, ESC_G, ESC_K, ESC_B, ESC_b, ESC_D, ESC_d, ESC_S, ESC_s,  enum { ESC_A = 1, ESC_G, ESC_K, ESC_B, ESC_b, ESC_D, ESC_d, ESC_S, ESC_s,
1273         ESC_W, ESC_w, ESC_dum1, ESC_dum2, ESC_C, ESC_P, ESC_p, ESC_R, ESC_H,         ESC_W, ESC_w, ESC_N, ESC_dum, ESC_C, ESC_P, ESC_p, ESC_R, ESC_H,
1274         ESC_h, ESC_V, ESC_v, ESC_X, ESC_Z, ESC_z, ESC_E, ESC_Q, ESC_g, ESC_k,         ESC_h, ESC_V, ESC_v, ESC_X, ESC_Z, ESC_z,
1275           ESC_E, ESC_Q, ESC_g, ESC_k,
1276           ESC_DU, ESC_du, ESC_SU, ESC_su, ESC_WU, ESC_wu,
1277         ESC_REF };         ESC_REF };
1278    
   
1279  /* Opcode table: Starting from 1 (i.e. after OP_END), the values up to  /* Opcode table: Starting from 1 (i.e. after OP_END), the values up to
1280  OP_EOD must correspond in order to the list of escapes immediately above.  OP_EOD must correspond in order to the list of escapes immediately above.
1281    
1282  *** NOTE NOTE NOTE *** Whenever this list is updated, the two macro definitions  *** NOTE NOTE NOTE *** Whenever this list is updated, the two macro definitions
1283  that follow must also be updated to match. There is also a table called  that follow must also be updated to match. There are also tables called
1284  "coptable" in pcre_dfa_exec.c that must be updated. */  "coptable" and "poptable" in pcre_dfa_exec.c that must be updated. */
1285    
1286  enum {  enum {
1287    OP_END,            /* 0 End of pattern */    OP_END,            /* 0 End of pattern */
# Line 1223  enum { Line 1299  enum {
1299    OP_WHITESPACE,         /*  9 \s */    OP_WHITESPACE,         /*  9 \s */
1300    OP_NOT_WORDCHAR,       /* 10 \W */    OP_NOT_WORDCHAR,       /* 10 \W */
1301    OP_WORDCHAR,           /* 11 \w */    OP_WORDCHAR,           /* 11 \w */
1302    OP_ANY,            /* 12 Match any character (subject to DOTALL) */    OP_ANY,            /* 12 Match any character except newline */
1303    OP_ALLANY,         /* 13 Match any character (not subject to DOTALL) */    OP_ALLANY,         /* 13 Match any character */
1304    OP_ANYBYTE,        /* 14 Match any byte (\C); different to OP_ANY for UTF-8 */    OP_ANYBYTE,        /* 14 Match any byte (\C); different to OP_ANY for UTF-8 */
1305    OP_NOTPROP,        /* 15 \P (not Unicode property) */    OP_NOTPROP,        /* 15 \P (not Unicode property) */
1306    OP_PROP,           /* 16 \p (Unicode property) */    OP_PROP,           /* 16 \p (Unicode property) */
# Line 1341  enum { Line 1417  enum {
1417    OP_SCBRA,          /* 98 Start of capturing bracket, check empty */    OP_SCBRA,          /* 98 Start of capturing bracket, check empty */
1418    OP_SCOND,          /* 99 Conditional group, check empty */    OP_SCOND,          /* 99 Conditional group, check empty */
1419    
1420      /* The next two pairs must (respectively) be kept together. */
1421    
1422    OP_CREF,           /* 100 Used to hold a capture number as condition */    OP_CREF,           /* 100 Used to hold a capture number as condition */
1423    OP_RREF,           /* 101 Used to hold a recursion number as condition */    OP_NCREF,          /* 101 Same, but generaged by a name reference*/
1424    OP_DEF,            /* 102 The DEFINE condition */    OP_RREF,           /* 102 Used to hold a recursion number as condition */
1425      OP_NRREF,          /* 103 Same, but generaged by a name reference*/
1426      OP_DEF,            /* 104 The DEFINE condition */
1427    
1428    OP_BRAZERO,        /* 103 These two must remain together and in this */    OP_BRAZERO,        /* 105 These two must remain together and in this */
1429    OP_BRAMINZERO,     /* 104 order. */    OP_BRAMINZERO,     /* 106 order. */
1430    
1431    /* These are backtracking control verbs */    /* These are backtracking control verbs */
1432    
1433    OP_PRUNE,          /* 105 */    OP_MARK,           /* 107 always has an argument */
1434    OP_SKIP,           /* 106 */    OP_PRUNE,          /* 108 */
1435    OP_THEN,           /* 107 */    OP_PRUNE_ARG,      /* 109 same, but with argument */
1436    OP_COMMIT,         /* 108 */    OP_SKIP,           /* 110 */
1437      OP_SKIP_ARG,       /* 111 same, but with argument */
1438      OP_THEN,           /* 112 */
1439      OP_THEN_ARG,       /* 113 same, but with argument */
1440      OP_COMMIT,         /* 114 */
1441    
1442    /* These are forced failure and success verbs */    /* These are forced failure and success verbs */
1443    
1444    OP_FAIL,           /* 109 */    OP_FAIL,           /* 115 */
1445    OP_ACCEPT,         /* 110 */    OP_ACCEPT,         /* 116 */
1446      OP_CLOSE,          /* 117 Used before OP_ACCEPT to close open captures */
1447    
1448    /* This is used to skip a subpattern with a {0} quantifier */    /* This is used to skip a subpattern with a {0} quantifier */
1449    
1450    OP_SKIPZERO        /* 111 */    OP_SKIPZERO,       /* 118 */
1451    
1452      /* This is not an opcode, but is used to check that tables indexed by opcode
1453      are the correct length, in order to catch updating errors - there have been
1454      some in the past. */
1455    
1456      OP_TABLE_LENGTH
1457  };  };
1458    
1459    /* *** NOTE NOTE NOTE *** Whenever the list above is updated, the two macro
1460    definitions that follow must also be updated to match. There are also tables
1461    called "coptable" and "poptable" in pcre_dfa_exec.c that must be updated. */
1462    
1463    
1464  /* This macro defines textual names for all the opcodes. These are used only  /* This macro defines textual names for all the opcodes. These are used only
1465  for debugging. The macro is referenced only in pcre_printint.c. */  for debugging. The macro is referenced only in pcre_printint.c. */
# Line 1386  for debugging. The macro is referenced o Line 1481  for debugging. The macro is referenced o
1481    "Alt", "Ket", "KetRmax", "KetRmin", "Assert", "Assert not",     \    "Alt", "Ket", "KetRmax", "KetRmin", "Assert", "Assert not",     \
1482    "AssertB", "AssertB not", "Reverse",                            \    "AssertB", "AssertB not", "Reverse",                            \
1483    "Once", "Bra", "CBra", "Cond", "SBra", "SCBra", "SCond",        \    "Once", "Bra", "CBra", "Cond", "SBra", "SCBra", "SCond",        \
1484    "Cond ref", "Cond rec", "Cond def", "Brazero", "Braminzero",    \    "Cond ref", "Cond nref", "Cond rec", "Cond nrec", "Cond def",   \
1485    "*PRUNE", "*SKIP", "*THEN", "*COMMIT", "*FAIL", "*ACCEPT",      \    "Brazero", "Braminzero",                                        \
1486    "Skip zero"    "*MARK", "*PRUNE", "*PRUNE", "*SKIP", "*SKIP",                  \
1487      "*THEN", "*THEN", "*COMMIT", "*FAIL", "*ACCEPT",                \
1488      "Close", "Skip zero"
1489    
1490    
1491  /* This macro defines the length of fixed length operations in the compiled  /* This macro defines the length of fixed length operations in the compiled
# Line 1405  in UTF-8 mode. The code that uses this t Line 1502  in UTF-8 mode. The code that uses this t
1502    1, 1, 1, 1, 1,                 /* \A, \G, \K, \B, \b                     */ \    1, 1, 1, 1, 1,                 /* \A, \G, \K, \B, \b                     */ \
1503    1, 1, 1, 1, 1, 1,              /* \D, \d, \S, \s, \W, \w                 */ \    1, 1, 1, 1, 1, 1,              /* \D, \d, \S, \s, \W, \w                 */ \
1504    1, 1, 1,                       /* Any, AllAny, Anybyte                   */ \    1, 1, 1,                       /* Any, AllAny, Anybyte                   */ \
1505    3, 3, 1,                       /* NOTPROP, PROP, EXTUNI                  */ \    3, 3,                          /* \P, \p                                 */ \
1506    1, 1, 1, 1, 1,                 /* \R, \H, \h, \V, \v                     */ \    1, 1, 1, 1, 1,                 /* \R, \H, \h, \V, \v                     */ \
1507      1,                             /* \X                                     */ \
1508    1, 1, 2, 1, 1,                 /* \Z, \z, Opt, ^, $                      */ \    1, 1, 2, 1, 1,                 /* \Z, \z, Opt, ^, $                      */ \
1509    2,                             /* Char  - the minimum length             */ \    2,                             /* Char  - the minimum length             */ \
1510    2,                             /* Charnc  - the minimum length           */ \    2,                             /* Charnc  - the minimum length           */ \
# Line 1448  in UTF-8 mode. The code that uses this t Line 1546  in UTF-8 mode. The code that uses this t
1546    1+LINK_SIZE,                   /* SBRA                                   */ \    1+LINK_SIZE,                   /* SBRA                                   */ \
1547    3+LINK_SIZE,                   /* SCBRA                                  */ \    3+LINK_SIZE,                   /* SCBRA                                  */ \
1548    1+LINK_SIZE,                   /* SCOND                                  */ \    1+LINK_SIZE,                   /* SCOND                                  */ \
1549    3,                             /* CREF                                   */ \    3, 3,                          /* CREF, NCREF                            */ \
1550    3,                             /* RREF                                   */ \    3, 3,                          /* RREF, NRREF                            */ \
1551    1,                             /* DEF                                    */ \    1,                             /* DEF                                    */ \
1552    1, 1,                          /* BRAZERO, BRAMINZERO                    */ \    1, 1,                          /* BRAZERO, BRAMINZERO                    */ \
1553    1, 1, 1, 1,                    /* PRUNE, SKIP, THEN, COMMIT,             */ \    3, 1, 3,                       /* MARK, PRUNE, PRUNE_ARG                 */ \
1554    1, 1, 1                        /* FAIL, ACCEPT, SKIPZERO                 */    1, 3,                          /* SKIP, SKIP_ARG                         */ \
1555      1+LINK_SIZE, 3+LINK_SIZE,      /* THEN, THEN_ARG                         */ \
1556      1, 1, 1, 3, 1                  /* COMMIT, FAIL, ACCEPT, CLOSE, SKIPZERO  */
1557    
1558    
1559  /* A magic value for OP_RREF to indicate the "any recursion" condition. */  /* A magic value for OP_RREF and OP_NRREF to indicate the "any recursion"
1560    condition. */
1561    
1562  #define RREF_ANY  0xffff  #define RREF_ANY  0xffff
1563    
1564  /* Error code numbers. They are given names so that they can more easily be  /* Compile time error code numbers. They are given names so that they can more
1565  tracked. */  easily be tracked. When a new number is added, the table called eint in
1566    pcreposix.c must be updated. */
1567    
1568  enum { ERR0,  ERR1,  ERR2,  ERR3,  ERR4,  ERR5,  ERR6,  ERR7,  ERR8,  ERR9,  enum { ERR0,  ERR1,  ERR2,  ERR3,  ERR4,  ERR5,  ERR6,  ERR7,  ERR8,  ERR9,
1569         ERR10, ERR11, ERR12, ERR13, ERR14, ERR15, ERR16, ERR17, ERR18, ERR19,         ERR10, ERR11, ERR12, ERR13, ERR14, ERR15, ERR16, ERR17, ERR18, ERR19,
# Line 1469  enum { ERR0, ERR1, ERR2, ERR3, ERR4, Line 1571  enum { ERR0, ERR1, ERR2, ERR3, ERR4,
1571         ERR30, ERR31, ERR32, ERR33, ERR34, ERR35, ERR36, ERR37, ERR38, ERR39,         ERR30, ERR31, ERR32, ERR33, ERR34, ERR35, ERR36, ERR37, ERR38, ERR39,
1572         ERR40, ERR41, ERR42, ERR43, ERR44, ERR45, ERR46, ERR47, ERR48, ERR49,         ERR40, ERR41, ERR42, ERR43, ERR44, ERR45, ERR46, ERR47, ERR48, ERR49,
1573         ERR50, ERR51, ERR52, ERR53, ERR54, ERR55, ERR56, ERR57, ERR58, ERR59,         ERR50, ERR51, ERR52, ERR53, ERR54, ERR55, ERR56, ERR57, ERR58, ERR59,
1574         ERR60, ERR61, ERR62, ERR63, ERR64 };         ERR60, ERR61, ERR62, ERR63, ERR64, ERR65, ERR66, ERR67, ERR68,
1575           ERRCOUNT };
1576    
1577  /* The real format of the start of the pcre block; the index of names and the  /* The real format of the start of the pcre block; the index of names and the
1578  code vector run on as long as necessary after the end. We store an explicit  code vector run on as long as necessary after the end. We store an explicit
# Line 1485  Because people can now save and re-use c Line 1588  Because people can now save and re-use c
1588  structure should be made at the end, and something earlier (e.g. a new  structure should be made at the end, and something earlier (e.g. a new
1589  flag in the options or one of the dummy fields) should indicate that the new  flag in the options or one of the dummy fields) should indicate that the new
1590  fields are present. Currently PCRE always sets the dummy fields to zero.  fields are present. Currently PCRE always sets the dummy fields to zero.
1591  NOTE NOTE NOTE:  NOTE NOTE NOTE
1592  */  */
1593    
1594  typedef struct real_pcre {  typedef struct real_pcre {
# Line 1512  remark (see NOTE above) about extending Line 1615  remark (see NOTE above) about extending
1615    
1616  typedef struct pcre_study_data {  typedef struct pcre_study_data {
1617    pcre_uint32 size;               /* Total that was malloced */    pcre_uint32 size;               /* Total that was malloced */
1618    pcre_uint32 options;    pcre_uint32 flags;              /* Private flags */
1619    uschar start_bits[32];    uschar start_bits[32];          /* Starting char bits */
1620      pcre_uint32 minlength;          /* Minimum subject length */
1621  } pcre_study_data;  } pcre_study_data;
1622    
1623    /* Structure for building a chain of open capturing subpatterns during
1624    compiling, so that instructions to close them can be compiled when (*ACCEPT) is
1625    encountered. This is also used to identify subpatterns that contain recursive
1626    back references to themselves, so that they can be made atomic. */
1627    
1628    typedef struct open_capitem {
1629      struct open_capitem *next;    /* Chain link */
1630      pcre_uint16 number;           /* Capture number */
1631      pcre_uint16 flag;             /* Set TRUE if recursive back ref */
1632    } open_capitem;
1633    
1634  /* Structure for passing "static" information around between the functions  /* Structure for passing "static" information around between the functions
1635  doing the compiling, so that they are thread-safe. */  doing the compiling, so that they are thread-safe. */
1636    
# Line 1528  typedef struct compile_data { Line 1643  typedef struct compile_data {
1643    const uschar *start_code;     /* The start of the compiled code */    const uschar *start_code;     /* The start of the compiled code */
1644    const uschar *start_pattern;  /* The start of the pattern */    const uschar *start_pattern;  /* The start of the pattern */
1645    const uschar *end_pattern;    /* The end of the pattern */    const uschar *end_pattern;    /* The end of the pattern */
1646      open_capitem *open_caps;      /* Chain of open capture items */
1647    uschar *hwm;                  /* High watermark of workspace */    uschar *hwm;                  /* High watermark of workspace */
1648    uschar *name_table;           /* The name/number table */    uschar *name_table;           /* The name/number table */
1649    int  names_found;             /* Number of entries so far */    int  names_found;             /* Number of entries so far */
# Line 1540  typedef struct compile_data { Line 1656  typedef struct compile_data {
1656    int  external_flags;          /* External flag bits to be set */    int  external_flags;          /* External flag bits to be set */
1657    int  req_varyopt;             /* "After variable item" flag for reqbyte */    int  req_varyopt;             /* "After variable item" flag for reqbyte */
1658    BOOL had_accept;              /* (*ACCEPT) encountered */    BOOL had_accept;              /* (*ACCEPT) encountered */
1659      BOOL check_lookbehind;        /* Lookbehinds need later checking */
1660    int  nltype;                  /* Newline type */    int  nltype;                  /* Newline type */
1661    int  nllen;                   /* Newline string length */    int  nllen;                   /* Newline string length */
1662    uschar nl[4];                 /* Newline string when fixed length */    uschar nl[4];                 /* Newline string when fixed length */
# Line 1550  branches, for testing for left recursion Line 1667  branches, for testing for left recursion
1667    
1668  typedef struct branch_chain {  typedef struct branch_chain {
1669    struct branch_chain *outer;    struct branch_chain *outer;
1670    uschar *current;    uschar *current_branch;
1671  } branch_chain;  } branch_chain;
1672    
1673  /* Structure for items in a linked list that represents an explicit recursive  /* Structure for items in a linked list that represents an explicit recursive
# Line 1560  typedef struct recursion_info { Line 1677  typedef struct recursion_info {
1677    struct recursion_info *prevrec; /* Previous recursion record (or NULL) */    struct recursion_info *prevrec; /* Previous recursion record (or NULL) */
1678    int group_num;                /* Number of group that was called */    int group_num;                /* Number of group that was called */
1679    const uschar *after_call;     /* "Return value": points after the call in the expr */    const uschar *after_call;     /* "Return value": points after the call in the expr */
   USPTR save_start;             /* Old value of mstart */  
1680    int *offset_save;             /* Pointer to start of saved offsets */    int *offset_save;             /* Pointer to start of saved offsets */
1681    int saved_max;                /* Number of saved offsets */    int saved_max;                /* Number of saved offsets */
1682      int save_offset_top;          /* Current value of offset_top */
1683  } recursion_info;  } recursion_info;
1684    
1685  /* Structure for building a chain of data for holding the values of the subject  /* Structure for building a chain of data for holding the values of the subject
# Line 1587  typedef struct match_data { Line 1704  typedef struct match_data {
1704    int    offset_max;            /* The maximum usable for return data */    int    offset_max;            /* The maximum usable for return data */
1705    int    nltype;                /* Newline type */    int    nltype;                /* Newline type */
1706    int    nllen;                 /* Newline string length */    int    nllen;                 /* Newline string length */
1707      int    name_count;            /* Number of names in name table */
1708      int    name_entry_size;       /* Size of entry in names table */
1709      uschar *name_table;           /* Table of names */
1710    uschar nl[4];                 /* Newline string when fixed */    uschar nl[4];                 /* Newline string when fixed */
1711    const uschar *lcc;            /* Points to lower casing table */    const uschar *lcc;            /* Points to lower casing table */
1712    const uschar *ctypes;         /* Points to table of type maps */    const uschar *ctypes;         /* Points to table of type maps */
# Line 1595  typedef struct match_data { Line 1715  typedef struct match_data {
1715    BOOL   noteol;                /* NOTEOL flag */    BOOL   noteol;                /* NOTEOL flag */
1716    BOOL   utf8;                  /* UTF8 flag */    BOOL   utf8;                  /* UTF8 flag */
1717    BOOL   jscript_compat;        /* JAVASCRIPT_COMPAT flag */    BOOL   jscript_compat;        /* JAVASCRIPT_COMPAT flag */
1718      BOOL   use_ucp;               /* PCRE_UCP flag */
1719    BOOL   endonly;               /* Dollar not before final \n */    BOOL   endonly;               /* Dollar not before final \n */
1720    BOOL   notempty;              /* Empty string match not wanted */    BOOL   notempty;              /* Empty string match not wanted */
1721    BOOL   partial;               /* PARTIAL flag */    BOOL   notempty_atstart;      /* Empty string match at start not wanted */
1722    BOOL   hitend;                /* Hit the end of the subject at some point */    BOOL   hitend;                /* Hit the end of the subject at some point */
1723    BOOL   bsr_anycrlf;           /* \R is just any CRLF, not full Unicode */    BOOL   bsr_anycrlf;           /* \R is just any CRLF, not full Unicode */
1724    const uschar *start_code;     /* For use when recursing */    const uschar *start_code;     /* For use when recursing */
# Line 1605  typedef struct match_data { Line 1726  typedef struct match_data {
1726    USPTR  end_subject;           /* End of the subject string */    USPTR  end_subject;           /* End of the subject string */
1727    USPTR  start_match_ptr;       /* Start of matched string */    USPTR  start_match_ptr;       /* Start of matched string */
1728    USPTR  end_match_ptr;         /* Subject position at end match */    USPTR  end_match_ptr;         /* Subject position at end match */
1729      USPTR  start_used_ptr;        /* Earliest consulted character */
1730      int    partial;               /* PARTIAL options */
1731    int    end_offset_top;        /* Highwater mark at end of match */    int    end_offset_top;        /* Highwater mark at end of match */
1732    int    capture_last;          /* Most recent capture number */    int    capture_last;          /* Most recent capture number */
1733    int    start_offset;          /* The start offset value */    int    start_offset;          /* The start offset value */
# Line 1612  typedef struct match_data { Line 1735  typedef struct match_data {
1735    int    eptrn;                 /* Next free eptrblock */    int    eptrn;                 /* Next free eptrblock */
1736    recursion_info *recursive;    /* Linked list of recursion data */    recursion_info *recursive;    /* Linked list of recursion data */
1737    void  *callout_data;          /* To pass back to callouts */    void  *callout_data;          /* To pass back to callouts */
1738      const uschar *mark;           /* Mark pointer to pass back */
1739  } match_data;  } match_data;
1740    
1741  /* A similar structure is used for the same purpose by the DFA matching  /* A similar structure is used for the same purpose by the DFA matching
# Line 1621  typedef struct dfa_match_data { Line 1745  typedef struct dfa_match_data {
1745    const uschar *start_code;     /* Start of the compiled pattern */    const uschar *start_code;     /* Start of the compiled pattern */
1746    const uschar *start_subject;  /* Start of the subject string */    const uschar *start_subject;  /* Start of the subject string */
1747    const uschar *end_subject;    /* End of subject string */    const uschar *end_subject;    /* End of subject string */
1748      const uschar *start_used_ptr; /* Earliest consulted character */
1749    const uschar *tables;         /* Character tables */    const uschar *tables;         /* Character tables */
1750      int   start_offset;           /* The start offset value */
1751    int   moptions;               /* Match options */    int   moptions;               /* Match options */
1752    int   poptions;               /* Pattern options */    int   poptions;               /* Pattern options */
1753    int    nltype;                /* Newline type */    int    nltype;                /* Newline type */
# Line 1700  extern const uschar _pcre_OP_lengths[]; Line 1826  extern const uschar _pcre_OP_lengths[];
1826  one of the exported public functions. They have to be "external" in the C  one of the exported public functions. They have to be "external" in the C
1827  sense, but are not part of the PCRE public API. */  sense, but are not part of the PCRE public API. */
1828    
1829  extern BOOL         _pcre_is_newline(const uschar *, int, const uschar *,  extern const uschar *_pcre_find_bracket(const uschar *, BOOL, int);
1830                        int *, BOOL);  extern BOOL          _pcre_is_newline(USPTR, int, USPTR, int *, BOOL);
1831  extern int          _pcre_ord2utf8(int, uschar *);  extern int           _pcre_ord2utf8(int, uschar *);
1832  extern real_pcre   *_pcre_try_flipped(const real_pcre *, real_pcre *,  extern real_pcre    *_pcre_try_flipped(const real_pcre *, real_pcre *,
1833                        const pcre_study_data *, pcre_study_data *);                         const pcre_study_data *, pcre_study_data *);
1834  extern int          _pcre_valid_utf8(const uschar *, int);  extern int           _pcre_valid_utf8(USPTR, int);
1835  extern BOOL         _pcre_was_newline(const uschar *, int, const uschar *,  extern BOOL          _pcre_was_newline(USPTR, int, USPTR, int *, BOOL);
1836                        int *, BOOL);  extern BOOL          _pcre_xclass(int, const uschar *);
 extern BOOL         _pcre_xclass(int, const uschar *);  
1837    
1838    
1839  /* Unicode character database (UCD) */  /* Unicode character database (UCD) */

Legend:
Removed from v.406  
changed lines
  Added in v.576

webmaster@exim.org
ViewVC Help
Powered by ViewVC 1.1.12