/[pcre]/code/trunk/pcre_internal.h
ViewVC logotype

Contents of /code/trunk/pcre_internal.h

Parent Directory Parent Directory | Revision Log Revision Log


Revision 384 - (show annotations) (download)
Sun Mar 8 16:27:43 2009 UTC (5 years, 7 months ago) by ph10
File MIME type: text/plain
File size: 48475 byte(s)
Fix Unicode property support in character classes for chars > 127 in non-UTF-8 
mode.

1 /*************************************************
2 * Perl-Compatible Regular Expressions *
3 *************************************************/
4
5
6 /* PCRE is a library of functions to support regular expressions whose syntax
7 and semantics are as close as possible to those of the Perl 5 language.
8
9 Written by Philip Hazel
10 Copyright (c) 1997-2009 University of Cambridge
11
12 -----------------------------------------------------------------------------
13 Redistribution and use in source and binary forms, with or without
14 modification, are permitted provided that the following conditions are met:
15
16 * Redistributions of source code must retain the above copyright notice,
17 this list of conditions and the following disclaimer.
18
19 * Redistributions in binary form must reproduce the above copyright
20 notice, this list of conditions and the following disclaimer in the
21 documentation and/or other materials provided with the distribution.
22
23 * Neither the name of the University of Cambridge nor the names of its
24 contributors may be used to endorse or promote products derived from
25 this software without specific prior written permission.
26
27 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
28 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
29 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
30 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
31 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
32 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
33 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
34 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
35 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
36 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
37 POSSIBILITY OF SUCH DAMAGE.
38 -----------------------------------------------------------------------------
39 */
40
41 /* This header contains definitions that are shared between the different
42 modules, but which are not relevant to the exported API. This includes some
43 functions whose names all begin with "_pcre_". */
44
45 #ifndef PCRE_INTERNAL_H
46 #define PCRE_INTERNAL_H
47
48 /* Define DEBUG to get debugging output on stdout. */
49
50 #if 0
51 #define DEBUG
52 #endif
53
54 /* Use a macro for debugging printing, 'cause that eliminates the use of #ifdef
55 inline, and there are *still* stupid compilers about that don't like indented
56 pre-processor statements, or at least there were when I first wrote this. After
57 all, it had only been about 10 years then...
58
59 It turns out that the Mac Debugging.h header also defines the macro DPRINTF, so
60 be absolutely sure we get our version. */
61
62 #undef DPRINTF
63 #ifdef DEBUG
64 #define DPRINTF(p) printf p
65 #else
66 #define DPRINTF(p) /* Nothing */
67 #endif
68
69
70 /* Standard C headers plus the external interface definition. The only time
71 setjmp and stdarg are used is when NO_RECURSE is set. */
72
73 #include <ctype.h>
74 #include <limits.h>
75 #include <setjmp.h>
76 #include <stdarg.h>
77 #include <stddef.h>
78 #include <stdio.h>
79 #include <stdlib.h>
80 #include <string.h>
81
82 /* When compiling a DLL for Windows, the exported symbols have to be declared
83 using some MS magic. I found some useful information on this web page:
84 http://msdn2.microsoft.com/en-us/library/y4h7bcy6(VS.80).aspx. According to the
85 information there, using __declspec(dllexport) without "extern" we have a
86 definition; with "extern" we have a declaration. The settings here override the
87 setting in pcre.h (which is included below); it defines only PCRE_EXP_DECL,
88 which is all that is needed for applications (they just import the symbols). We
89 use:
90
91 PCRE_EXP_DECL for declarations
92 PCRE_EXP_DEFN for definitions of exported functions
93 PCRE_EXP_DATA_DEFN for definitions of exported variables
94
95 The reason for the two DEFN macros is that in non-Windows environments, one
96 does not want to have "extern" before variable definitions because it leads to
97 compiler warnings. So we distinguish between functions and variables. In
98 Windows, the two should always be the same.
99
100 The reason for wrapping this in #ifndef PCRE_EXP_DECL is so that pcretest,
101 which is an application, but needs to import this file in order to "peek" at
102 internals, can #include pcre.h first to get an application's-eye view.
103
104 In principle, people compiling for non-Windows, non-Unix-like (i.e. uncommon,
105 special-purpose environments) might want to stick other stuff in front of
106 exported symbols. That's why, in the non-Windows case, we set PCRE_EXP_DEFN and
107 PCRE_EXP_DATA_DEFN only if they are not already set. */
108
109 #ifndef PCRE_EXP_DECL
110 # ifdef _WIN32
111 # ifndef PCRE_STATIC
112 # define PCRE_EXP_DECL extern __declspec(dllexport)
113 # define PCRE_EXP_DEFN __declspec(dllexport)
114 # define PCRE_EXP_DATA_DEFN __declspec(dllexport)
115 # else
116 # define PCRE_EXP_DECL extern
117 # define PCRE_EXP_DEFN
118 # define PCRE_EXP_DATA_DEFN
119 # endif
120 # else
121 # ifdef __cplusplus
122 # define PCRE_EXP_DECL extern "C"
123 # else
124 # define PCRE_EXP_DECL extern
125 # endif
126 # ifndef PCRE_EXP_DEFN
127 # define PCRE_EXP_DEFN PCRE_EXP_DECL
128 # endif
129 # ifndef PCRE_EXP_DATA_DEFN
130 # define PCRE_EXP_DATA_DEFN
131 # endif
132 # endif
133 #endif
134
135 /* When compiling with the MSVC compiler, it is sometimes necessary to include
136 a "calling convention" before exported function names. (This is secondhand
137 information; I know nothing about MSVC myself). For example, something like
138
139 void __cdecl function(....)
140
141 might be needed. In order so make this easy, all the exported functions have
142 PCRE_CALL_CONVENTION just before their names. It is rarely needed; if not
143 set, we ensure here that it has no effect. */
144
145 #ifndef PCRE_CALL_CONVENTION
146 #define PCRE_CALL_CONVENTION
147 #endif
148
149 /* We need to have types that specify unsigned 16-bit and 32-bit integers. We
150 cannot determine these outside the compilation (e.g. by running a program as
151 part of "configure") because PCRE is often cross-compiled for use on other
152 systems. Instead we make use of the maximum sizes that are available at
153 preprocessor time in standard C environments. */
154
155 #if USHRT_MAX == 65535
156 typedef unsigned short pcre_uint16;
157 typedef short pcre_int16;
158 #elif UINT_MAX == 65535
159 typedef unsigned int pcre_uint16;
160 typedef int pcre_int16;
161 #else
162 #error Cannot determine a type for 16-bit unsigned integers
163 #endif
164
165 #if UINT_MAX == 4294967295
166 typedef unsigned int pcre_uint32;
167 typedef int pcre_int32;
168 #elif ULONG_MAX == 4294967295
169 typedef unsigned long int pcre_uint32;
170 typedef long int pcre_int32;
171 #else
172 #error Cannot determine a type for 32-bit unsigned integers
173 #endif
174
175 /* All character handling must be done as unsigned characters. Otherwise there
176 are problems with top-bit-set characters and functions such as isspace().
177 However, we leave the interface to the outside world as char *, because that
178 should make things easier for callers. We define a short type for unsigned char
179 to save lots of typing. I tried "uchar", but it causes problems on Digital
180 Unix, where it is defined in sys/types, so use "uschar" instead. */
181
182 typedef unsigned char uschar;
183
184 /* This is an unsigned int value that no character can ever have. UTF-8
185 characters only go up to 0x7fffffff (though Unicode doesn't go beyond
186 0x0010ffff). */
187
188 #define NOTACHAR 0xffffffff
189
190 /* PCRE is able to support several different kinds of newline (CR, LF, CRLF,
191 "any" and "anycrlf" at present). The following macros are used to package up
192 testing for newlines. NLBLOCK, PSSTART, and PSEND are defined in the various
193 modules to indicate in which datablock the parameters exist, and what the
194 start/end of string field names are. */
195
196 #define NLTYPE_FIXED 0 /* Newline is a fixed length string */
197 #define NLTYPE_ANY 1 /* Newline is any Unicode line ending */
198 #define NLTYPE_ANYCRLF 2 /* Newline is CR, LF, or CRLF */
199
200 /* This macro checks for a newline at the given position */
201
202 #define IS_NEWLINE(p) \
203 ((NLBLOCK->nltype != NLTYPE_FIXED)? \
204 ((p) < NLBLOCK->PSEND && \
205 _pcre_is_newline((p), NLBLOCK->nltype, NLBLOCK->PSEND, &(NLBLOCK->nllen),\
206 utf8)) \
207 : \
208 ((p) <= NLBLOCK->PSEND - NLBLOCK->nllen && \
209 (p)[0] == NLBLOCK->nl[0] && \
210 (NLBLOCK->nllen == 1 || (p)[1] == NLBLOCK->nl[1]) \
211 ) \
212 )
213
214 /* This macro checks for a newline immediately preceding the given position */
215
216 #define WAS_NEWLINE(p) \
217 ((NLBLOCK->nltype != NLTYPE_FIXED)? \
218 ((p) > NLBLOCK->PSSTART && \
219 _pcre_was_newline((p), NLBLOCK->nltype, NLBLOCK->PSSTART, \
220 &(NLBLOCK->nllen), utf8)) \
221 : \
222 ((p) >= NLBLOCK->PSSTART + NLBLOCK->nllen && \
223 (p)[-NLBLOCK->nllen] == NLBLOCK->nl[0] && \
224 (NLBLOCK->nllen == 1 || (p)[-NLBLOCK->nllen+1] == NLBLOCK->nl[1]) \
225 ) \
226 )
227
228 /* When PCRE is compiled as a C++ library, the subject pointer can be replaced
229 with a custom type. This makes it possible, for example, to allow pcre_exec()
230 to process subject strings that are discontinuous by using a smart pointer
231 class. It must always be possible to inspect all of the subject string in
232 pcre_exec() because of the way it backtracks. Two macros are required in the
233 normal case, for sign-unspecified and unsigned char pointers. The former is
234 used for the external interface and appears in pcre.h, which is why its name
235 must begin with PCRE_. */
236
237 #ifdef CUSTOM_SUBJECT_PTR
238 #define PCRE_SPTR CUSTOM_SUBJECT_PTR
239 #define USPTR CUSTOM_SUBJECT_PTR
240 #else
241 #define PCRE_SPTR const char *
242 #define USPTR const unsigned char *
243 #endif
244
245
246
247 /* Include the public PCRE header and the definitions of UCP character property
248 values. */
249
250 #include "pcre.h"
251 #include "ucp.h"
252
253 /* When compiling for use with the Virtual Pascal compiler, these functions
254 need to have their names changed. PCRE must be compiled with the -DVPCOMPAT
255 option on the command line. */
256
257 #ifdef VPCOMPAT
258 #define strlen(s) _strlen(s)
259 #define strncmp(s1,s2,m) _strncmp(s1,s2,m)
260 #define memcmp(s,c,n) _memcmp(s,c,n)
261 #define memcpy(d,s,n) _memcpy(d,s,n)
262 #define memmove(d,s,n) _memmove(d,s,n)
263 #define memset(s,c,n) _memset(s,c,n)
264 #else /* VPCOMPAT */
265
266 /* To cope with SunOS4 and other systems that lack memmove() but have bcopy(),
267 define a macro for memmove() if HAVE_MEMMOVE is false, provided that HAVE_BCOPY
268 is set. Otherwise, include an emulating function for those systems that have
269 neither (there some non-Unix environments where this is the case). */
270
271 #ifndef HAVE_MEMMOVE
272 #undef memmove /* some systems may have a macro */
273 #ifdef HAVE_BCOPY
274 #define memmove(a, b, c) bcopy(b, a, c)
275 #else /* HAVE_BCOPY */
276 static void *
277 pcre_memmove(void *d, const void *s, size_t n)
278 {
279 size_t i;
280 unsigned char *dest = (unsigned char *)d;
281 const unsigned char *src = (const unsigned char *)s;
282 if (dest > src)
283 {
284 dest += n;
285 src += n;
286 for (i = 0; i < n; ++i) *(--dest) = *(--src);
287 return (void *)dest;
288 }
289 else
290 {
291 for (i = 0; i < n; ++i) *dest++ = *src++;
292 return (void *)(dest - n);
293 }
294 }
295 #define memmove(a, b, c) pcre_memmove(a, b, c)
296 #endif /* not HAVE_BCOPY */
297 #endif /* not HAVE_MEMMOVE */
298 #endif /* not VPCOMPAT */
299
300
301 /* PCRE keeps offsets in its compiled code as 2-byte quantities (always stored
302 in big-endian order) by default. These are used, for example, to link from the
303 start of a subpattern to its alternatives and its end. The use of 2 bytes per
304 offset limits the size of the compiled regex to around 64K, which is big enough
305 for almost everybody. However, I received a request for an even bigger limit.
306 For this reason, and also to make the code easier to maintain, the storing and
307 loading of offsets from the byte string is now handled by the macros that are
308 defined here.
309
310 The macros are controlled by the value of LINK_SIZE. This defaults to 2 in
311 the config.h file, but can be overridden by using -D on the command line. This
312 is automated on Unix systems via the "configure" command. */
313
314 #if LINK_SIZE == 2
315
316 #define PUT(a,n,d) \
317 (a[n] = (d) >> 8), \
318 (a[(n)+1] = (d) & 255)
319
320 #define GET(a,n) \
321 (((a)[n] << 8) | (a)[(n)+1])
322
323 #define MAX_PATTERN_SIZE (1 << 16)
324
325
326 #elif LINK_SIZE == 3
327
328 #define PUT(a,n,d) \
329 (a[n] = (d) >> 16), \
330 (a[(n)+1] = (d) >> 8), \
331 (a[(n)+2] = (d) & 255)
332
333 #define GET(a,n) \
334 (((a)[n] << 16) | ((a)[(n)+1] << 8) | (a)[(n)+2])
335
336 #define MAX_PATTERN_SIZE (1 << 24)
337
338
339 #elif LINK_SIZE == 4
340
341 #define PUT(a,n,d) \
342 (a[n] = (d) >> 24), \
343 (a[(n)+1] = (d) >> 16), \
344 (a[(n)+2] = (d) >> 8), \
345 (a[(n)+3] = (d) & 255)
346
347 #define GET(a,n) \
348 (((a)[n] << 24) | ((a)[(n)+1] << 16) | ((a)[(n)+2] << 8) | (a)[(n)+3])
349
350 #define MAX_PATTERN_SIZE (1 << 30) /* Keep it positive */
351
352
353 #else
354 #error LINK_SIZE must be either 2, 3, or 4
355 #endif
356
357
358 /* Convenience macro defined in terms of the others */
359
360 #define PUTINC(a,n,d) PUT(a,n,d), a += LINK_SIZE
361
362
363 /* PCRE uses some other 2-byte quantities that do not change when the size of
364 offsets changes. There are used for repeat counts and for other things such as
365 capturing parenthesis numbers in back references. */
366
367 #define PUT2(a,n,d) \
368 a[n] = (d) >> 8; \
369 a[(n)+1] = (d) & 255
370
371 #define GET2(a,n) \
372 (((a)[n] << 8) | (a)[(n)+1])
373
374 #define PUT2INC(a,n,d) PUT2(a,n,d), a += 2
375
376
377 /* When UTF-8 encoding is being used, a character is no longer just a single
378 byte. The macros for character handling generate simple sequences when used in
379 byte-mode, and more complicated ones for UTF-8 characters. BACKCHAR should
380 never be called in byte mode. To make sure it can never even appear when UTF-8
381 support is omitted, we don't even define it. */
382
383 #ifndef SUPPORT_UTF8
384 #define GETCHAR(c, eptr) c = *eptr;
385 #define GETCHARTEST(c, eptr) c = *eptr;
386 #define GETCHARINC(c, eptr) c = *eptr++;
387 #define GETCHARINCTEST(c, eptr) c = *eptr++;
388 #define GETCHARLEN(c, eptr, len) c = *eptr;
389 /* #define BACKCHAR(eptr) */
390
391 #else /* SUPPORT_UTF8 */
392
393 /* Get the next UTF-8 character, not advancing the pointer. This is called when
394 we know we are in UTF-8 mode. */
395
396 #define GETCHAR(c, eptr) \
397 c = *eptr; \
398 if (c >= 0xc0) \
399 { \
400 int gcii; \
401 int gcaa = _pcre_utf8_table4[c & 0x3f]; /* Number of additional bytes */ \
402 int gcss = 6*gcaa; \
403 c = (c & _pcre_utf8_table3[gcaa]) << gcss; \
404 for (gcii = 1; gcii <= gcaa; gcii++) \
405 { \
406 gcss -= 6; \
407 c |= (eptr[gcii] & 0x3f) << gcss; \
408 } \
409 }
410
411 /* Get the next UTF-8 character, testing for UTF-8 mode, and not advancing the
412 pointer. */
413
414 #define GETCHARTEST(c, eptr) \
415 c = *eptr; \
416 if (utf8 && c >= 0xc0) \
417 { \
418 int gcii; \
419 int gcaa = _pcre_utf8_table4[c & 0x3f]; /* Number of additional bytes */ \
420 int gcss = 6*gcaa; \
421 c = (c & _pcre_utf8_table3[gcaa]) << gcss; \
422 for (gcii = 1; gcii <= gcaa; gcii++) \
423 { \
424 gcss -= 6; \
425 c |= (eptr[gcii] & 0x3f) << gcss; \
426 } \
427 }
428
429 /* Get the next UTF-8 character, advancing the pointer. This is called when we
430 know we are in UTF-8 mode. */
431
432 #define GETCHARINC(c, eptr) \
433 c = *eptr++; \
434 if (c >= 0xc0) \
435 { \
436 int gcaa = _pcre_utf8_table4[c & 0x3f]; /* Number of additional bytes */ \
437 int gcss = 6*gcaa; \
438 c = (c & _pcre_utf8_table3[gcaa]) << gcss; \
439 while (gcaa-- > 0) \
440 { \
441 gcss -= 6; \
442 c |= (*eptr++ & 0x3f) << gcss; \
443 } \
444 }
445
446 /* Get the next character, testing for UTF-8 mode, and advancing the pointer */
447
448 #define GETCHARINCTEST(c, eptr) \
449 c = *eptr++; \
450 if (utf8 && c >= 0xc0) \
451 { \
452 int gcaa = _pcre_utf8_table4[c & 0x3f]; /* Number of additional bytes */ \
453 int gcss = 6*gcaa; \
454 c = (c & _pcre_utf8_table3[gcaa]) << gcss; \
455 while (gcaa-- > 0) \
456 { \
457 gcss -= 6; \
458 c |= (*eptr++ & 0x3f) << gcss; \
459 } \
460 }
461
462 /* Get the next UTF-8 character, not advancing the pointer, incrementing length
463 if there are extra bytes. This is called when we know we are in UTF-8 mode. */
464
465 #define GETCHARLEN(c, eptr, len) \
466 c = *eptr; \
467 if (c >= 0xc0) \
468 { \
469 int gcii; \
470 int gcaa = _pcre_utf8_table4[c & 0x3f]; /* Number of additional bytes */ \
471 int gcss = 6*gcaa; \
472 c = (c & _pcre_utf8_table3[gcaa]) << gcss; \
473 for (gcii = 1; gcii <= gcaa; gcii++) \
474 { \
475 gcss -= 6; \
476 c |= (eptr[gcii] & 0x3f) << gcss; \
477 } \
478 len += gcaa; \
479 }
480
481 /* Get the next UTF-8 character, testing for UTF-8 mode, not advancing the
482 pointer, incrementing length if there are extra bytes. This is called when we
483 know we are in UTF-8 mode. */
484
485 #define GETCHARLENTEST(c, eptr, len) \
486 c = *eptr; \
487 if (utf8 && c >= 0xc0) \
488 { \
489 int gcii; \
490 int gcaa = _pcre_utf8_table4[c & 0x3f]; /* Number of additional bytes */ \
491 int gcss = 6*gcaa; \
492 c = (c & _pcre_utf8_table3[gcaa]) << gcss; \
493 for (gcii = 1; gcii <= gcaa; gcii++) \
494 { \
495 gcss -= 6; \
496 c |= (eptr[gcii] & 0x3f) << gcss; \
497 } \
498 len += gcaa; \
499 }
500
501 /* If the pointer is not at the start of a character, move it back until
502 it is. This is called only in UTF-8 mode - we don't put a test within the macro
503 because almost all calls are already within a block of UTF-8 only code. */
504
505 #define BACKCHAR(eptr) while((*eptr & 0xc0) == 0x80) eptr--
506
507 #endif
508
509
510 /* In case there is no definition of offsetof() provided - though any proper
511 Standard C system should have one. */
512
513 #ifndef offsetof
514 #define offsetof(p_type,field) ((size_t)&(((p_type *)0)->field))
515 #endif
516
517
518 /* These are the public options that can change during matching. */
519
520 #define PCRE_IMS (PCRE_CASELESS|PCRE_MULTILINE|PCRE_DOTALL)
521
522 /* Private flags containing information about the compiled regex. They used to
523 live at the top end of the options word, but that got almost full, so now they
524 are in a 16-bit flags word. */
525
526 #define PCRE_NOPARTIAL 0x0001 /* can't use partial with this regex */
527 #define PCRE_FIRSTSET 0x0002 /* first_byte is set */
528 #define PCRE_REQCHSET 0x0004 /* req_byte is set */
529 #define PCRE_STARTLINE 0x0008 /* start after \n for multiline */
530 #define PCRE_JCHANGED 0x0010 /* j option used in regex */
531 #define PCRE_HASCRORLF 0x0020 /* explicit \r or \n in pattern */
532
533 /* Options for the "extra" block produced by pcre_study(). */
534
535 #define PCRE_STUDY_MAPPED 0x01 /* a map of starting chars exists */
536
537 /* Masks for identifying the public options that are permitted at compile
538 time, run time, or study time, respectively. */
539
540 #define PCRE_NEWLINE_BITS (PCRE_NEWLINE_CR|PCRE_NEWLINE_LF|PCRE_NEWLINE_ANY| \
541 PCRE_NEWLINE_ANYCRLF)
542
543 #define PUBLIC_OPTIONS \
544 (PCRE_CASELESS|PCRE_EXTENDED|PCRE_ANCHORED|PCRE_MULTILINE| \
545 PCRE_DOTALL|PCRE_DOLLAR_ENDONLY|PCRE_EXTRA|PCRE_UNGREEDY|PCRE_UTF8| \
546 PCRE_NO_AUTO_CAPTURE|PCRE_NO_UTF8_CHECK|PCRE_AUTO_CALLOUT|PCRE_FIRSTLINE| \
547 PCRE_DUPNAMES|PCRE_NEWLINE_BITS|PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE| \
548 PCRE_JAVASCRIPT_COMPAT)
549
550 #define PUBLIC_EXEC_OPTIONS \
551 (PCRE_ANCHORED|PCRE_NOTBOL|PCRE_NOTEOL|PCRE_NOTEMPTY|PCRE_NO_UTF8_CHECK| \
552 PCRE_PARTIAL|PCRE_NEWLINE_BITS|PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE)
553
554 #define PUBLIC_DFA_EXEC_OPTIONS \
555 (PCRE_ANCHORED|PCRE_NOTBOL|PCRE_NOTEOL|PCRE_NOTEMPTY|PCRE_NO_UTF8_CHECK| \
556 PCRE_PARTIAL|PCRE_DFA_SHORTEST|PCRE_DFA_RESTART|PCRE_NEWLINE_BITS| \
557 PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE)
558
559 #define PUBLIC_STUDY_OPTIONS 0 /* None defined */
560
561 /* Magic number to provide a small check against being handed junk. Also used
562 to detect whether a pattern was compiled on a host of different endianness. */
563
564 #define MAGIC_NUMBER 0x50435245UL /* 'PCRE' */
565
566 /* Negative values for the firstchar and reqchar variables */
567
568 #define REQ_UNSET (-2)
569 #define REQ_NONE (-1)
570
571 /* The maximum remaining length of subject we are prepared to search for a
572 req_byte match. */
573
574 #define REQ_BYTE_MAX 1000
575
576 /* Flags added to firstbyte or reqbyte; a "non-literal" item is either a
577 variable-length repeat, or a anything other than literal characters. */
578
579 #define REQ_CASELESS 0x0100 /* indicates caselessness */
580 #define REQ_VARY 0x0200 /* reqbyte followed non-literal item */
581
582 /* Miscellaneous definitions. The #ifndef is to pacify compiler warnings in
583 environments where these macros are defined elsewhere. Unfortunately, there
584 is no way to do the same for the typedef. */
585
586 typedef int BOOL;
587
588 #ifndef FALSE
589 #define FALSE 0
590 #define TRUE 1
591 #endif
592
593 /* Escape items that are just an encoding of a particular data value. */
594
595 #ifndef ESC_e
596 #define ESC_e 27
597 #endif
598
599 #ifndef ESC_f
600 #define ESC_f '\f'
601 #endif
602
603 #ifndef ESC_n
604 #define ESC_n '\n'
605 #endif
606
607 #ifndef ESC_r
608 #define ESC_r '\r'
609 #endif
610
611 /* We can't officially use ESC_t because it is a POSIX reserved identifier
612 (presumably because of all the others like size_t). */
613
614 #ifndef ESC_tee
615 #define ESC_tee '\t'
616 #endif
617
618 /* Codes for different types of Unicode property */
619
620 #define PT_ANY 0 /* Any property - matches all chars */
621 #define PT_LAMP 1 /* L& - the union of Lu, Ll, Lt */
622 #define PT_GC 2 /* General characteristic (e.g. L) */
623 #define PT_PC 3 /* Particular characteristic (e.g. Lu) */
624 #define PT_SC 4 /* Script (e.g. Han) */
625
626 /* Flag bits and data types for the extended class (OP_XCLASS) for classes that
627 contain UTF-8 characters with values greater than 255. */
628
629 #define XCL_NOT 0x01 /* Flag: this is a negative class */
630 #define XCL_MAP 0x02 /* Flag: a 32-byte map is present */
631
632 #define XCL_END 0 /* Marks end of individual items */
633 #define XCL_SINGLE 1 /* Single item (one multibyte char) follows */
634 #define XCL_RANGE 2 /* A range (two multibyte chars) follows */
635 #define XCL_PROP 3 /* Unicode property (2-byte property code follows) */
636 #define XCL_NOTPROP 4 /* Unicode inverted property (ditto) */
637
638 /* These are escaped items that aren't just an encoding of a particular data
639 value such as \n. They must have non-zero values, as check_escape() returns
640 their negation. Also, they must appear in the same order as in the opcode
641 definitions below, up to ESC_z. There's a dummy for OP_ANY because it
642 corresponds to "." rather than an escape sequence, and another for OP_ALLANY
643 (which is used for [^] in JavaScript compatibility mode).
644
645 The final escape must be ESC_REF as subsequent values are used for
646 backreferences (\1, \2, \3, etc). There are two tests in the code for an escape
647 greater than ESC_b and less than ESC_Z to detect the types that may be
648 repeated. These are the types that consume characters. If any new escapes are
649 put in between that don't consume a character, that code will have to change.
650 */
651
652 enum { ESC_A = 1, ESC_G, ESC_K, ESC_B, ESC_b, ESC_D, ESC_d, ESC_S, ESC_s,
653 ESC_W, ESC_w, ESC_dum1, ESC_dum2, ESC_C, ESC_P, ESC_p, ESC_R, ESC_H,
654 ESC_h, ESC_V, ESC_v, ESC_X, ESC_Z, ESC_z, ESC_E, ESC_Q, ESC_g, ESC_k,
655 ESC_REF };
656
657
658 /* Opcode table: Starting from 1 (i.e. after OP_END), the values up to
659 OP_EOD must correspond in order to the list of escapes immediately above.
660
661 *** NOTE NOTE NOTE *** Whenever this list is updated, the two macro definitions
662 that follow must also be updated to match. There is also a table called
663 "coptable" in pcre_dfa_exec.c that must be updated. */
664
665 enum {
666 OP_END, /* 0 End of pattern */
667
668 /* Values corresponding to backslashed metacharacters */
669
670 OP_SOD, /* 1 Start of data: \A */
671 OP_SOM, /* 2 Start of match (subject + offset): \G */
672 OP_SET_SOM, /* 3 Set start of match (\K) */
673 OP_NOT_WORD_BOUNDARY, /* 4 \B */
674 OP_WORD_BOUNDARY, /* 5 \b */
675 OP_NOT_DIGIT, /* 6 \D */
676 OP_DIGIT, /* 7 \d */
677 OP_NOT_WHITESPACE, /* 8 \S */
678 OP_WHITESPACE, /* 9 \s */
679 OP_NOT_WORDCHAR, /* 10 \W */
680 OP_WORDCHAR, /* 11 \w */
681 OP_ANY, /* 12 Match any character (subject to DOTALL) */
682 OP_ALLANY, /* 13 Match any character (not subject to DOTALL) */
683 OP_ANYBYTE, /* 14 Match any byte (\C); different to OP_ANY for UTF-8 */
684 OP_NOTPROP, /* 15 \P (not Unicode property) */
685 OP_PROP, /* 16 \p (Unicode property) */
686 OP_ANYNL, /* 17 \R (any newline sequence) */
687 OP_NOT_HSPACE, /* 18 \H (not horizontal whitespace) */
688 OP_HSPACE, /* 19 \h (horizontal whitespace) */
689 OP_NOT_VSPACE, /* 20 \V (not vertical whitespace) */
690 OP_VSPACE, /* 21 \v (vertical whitespace) */
691 OP_EXTUNI, /* 22 \X (extended Unicode sequence */
692 OP_EODN, /* 23 End of data or \n at end of data: \Z. */
693 OP_EOD, /* 24 End of data: \z */
694
695 OP_OPT, /* 25 Set runtime options */
696 OP_CIRC, /* 26 Start of line - varies with multiline switch */
697 OP_DOLL, /* 27 End of line - varies with multiline switch */
698 OP_CHAR, /* 28 Match one character, casefully */
699 OP_CHARNC, /* 29 Match one character, caselessly */
700 OP_NOT, /* 30 Match one character, not the following one */
701
702 OP_STAR, /* 31 The maximizing and minimizing versions of */
703 OP_MINSTAR, /* 32 these six opcodes must come in pairs, with */
704 OP_PLUS, /* 33 the minimizing one second. */
705 OP_MINPLUS, /* 34 This first set applies to single characters.*/
706 OP_QUERY, /* 35 */
707 OP_MINQUERY, /* 36 */
708
709 OP_UPTO, /* 37 From 0 to n matches */
710 OP_MINUPTO, /* 38 */
711 OP_EXACT, /* 39 Exactly n matches */
712
713 OP_POSSTAR, /* 40 Possessified star */
714 OP_POSPLUS, /* 41 Possessified plus */
715 OP_POSQUERY, /* 42 Posesssified query */
716 OP_POSUPTO, /* 43 Possessified upto */
717
718 OP_NOTSTAR, /* 44 The maximizing and minimizing versions of */
719 OP_NOTMINSTAR, /* 45 these six opcodes must come in pairs, with */
720 OP_NOTPLUS, /* 46 the minimizing one second. They must be in */
721 OP_NOTMINPLUS, /* 47 exactly the same order as those above. */
722 OP_NOTQUERY, /* 48 This set applies to "not" single characters. */
723 OP_NOTMINQUERY, /* 49 */
724
725 OP_NOTUPTO, /* 50 From 0 to n matches */
726 OP_NOTMINUPTO, /* 51 */
727 OP_NOTEXACT, /* 52 Exactly n matches */
728
729 OP_NOTPOSSTAR, /* 53 Possessified versions */
730 OP_NOTPOSPLUS, /* 54 */
731 OP_NOTPOSQUERY, /* 55 */
732 OP_NOTPOSUPTO, /* 56 */
733
734 OP_TYPESTAR, /* 57 The maximizing and minimizing versions of */
735 OP_TYPEMINSTAR, /* 58 these six opcodes must come in pairs, with */
736 OP_TYPEPLUS, /* 59 the minimizing one second. These codes must */
737 OP_TYPEMINPLUS, /* 60 be in exactly the same order as those above. */
738 OP_TYPEQUERY, /* 61 This set applies to character types such as \d */
739 OP_TYPEMINQUERY, /* 62 */
740
741 OP_TYPEUPTO, /* 63 From 0 to n matches */
742 OP_TYPEMINUPTO, /* 64 */
743 OP_TYPEEXACT, /* 65 Exactly n matches */
744
745 OP_TYPEPOSSTAR, /* 66 Possessified versions */
746 OP_TYPEPOSPLUS, /* 67 */
747 OP_TYPEPOSQUERY, /* 68 */
748 OP_TYPEPOSUPTO, /* 69 */
749
750 OP_CRSTAR, /* 70 The maximizing and minimizing versions of */
751 OP_CRMINSTAR, /* 71 all these opcodes must come in pairs, with */
752 OP_CRPLUS, /* 72 the minimizing one second. These codes must */
753 OP_CRMINPLUS, /* 73 be in exactly the same order as those above. */
754 OP_CRQUERY, /* 74 These are for character classes and back refs */
755 OP_CRMINQUERY, /* 75 */
756 OP_CRRANGE, /* 76 These are different to the three sets above. */
757 OP_CRMINRANGE, /* 77 */
758
759 OP_CLASS, /* 78 Match a character class, chars < 256 only */
760 OP_NCLASS, /* 79 Same, but the bitmap was created from a negative
761 class - the difference is relevant only when a UTF-8
762 character > 255 is encountered. */
763
764 OP_XCLASS, /* 80 Extended class for handling UTF-8 chars within the
765 class. This does both positive and negative. */
766
767 OP_REF, /* 81 Match a back reference */
768 OP_RECURSE, /* 82 Match a numbered subpattern (possibly recursive) */
769 OP_CALLOUT, /* 83 Call out to external function if provided */
770
771 OP_ALT, /* 84 Start of alternation */
772 OP_KET, /* 85 End of group that doesn't have an unbounded repeat */
773 OP_KETRMAX, /* 86 These two must remain together and in this */
774 OP_KETRMIN, /* 87 order. They are for groups the repeat for ever. */
775
776 /* The assertions must come before BRA, CBRA, ONCE, and COND.*/
777
778 OP_ASSERT, /* 88 Positive lookahead */
779 OP_ASSERT_NOT, /* 89 Negative lookahead */
780 OP_ASSERTBACK, /* 90 Positive lookbehind */
781 OP_ASSERTBACK_NOT, /* 91 Negative lookbehind */
782 OP_REVERSE, /* 92 Move pointer back - used in lookbehind assertions */
783
784 /* ONCE, BRA, CBRA, and COND must come after the assertions, with ONCE first,
785 as there's a test for >= ONCE for a subpattern that isn't an assertion. */
786
787 OP_ONCE, /* 93 Atomic group */
788 OP_BRA, /* 94 Start of non-capturing bracket */
789 OP_CBRA, /* 95 Start of capturing bracket */
790 OP_COND, /* 96 Conditional group */
791
792 /* These three must follow the previous three, in the same order. There's a
793 check for >= SBRA to distinguish the two sets. */
794
795 OP_SBRA, /* 97 Start of non-capturing bracket, check empty */
796 OP_SCBRA, /* 98 Start of capturing bracket, check empty */
797 OP_SCOND, /* 99 Conditional group, check empty */
798
799 OP_CREF, /* 100 Used to hold a capture number as condition */
800 OP_RREF, /* 101 Used to hold a recursion number as condition */
801 OP_DEF, /* 102 The DEFINE condition */
802
803 OP_BRAZERO, /* 103 These two must remain together and in this */
804 OP_BRAMINZERO, /* 104 order. */
805
806 /* These are backtracking control verbs */
807
808 OP_PRUNE, /* 105 */
809 OP_SKIP, /* 106 */
810 OP_THEN, /* 107 */
811 OP_COMMIT, /* 108 */
812
813 /* These are forced failure and success verbs */
814
815 OP_FAIL, /* 109 */
816 OP_ACCEPT, /* 110 */
817
818 /* This is used to skip a subpattern with a {0} quantifier */
819
820 OP_SKIPZERO /* 111 */
821 };
822
823
824 /* This macro defines textual names for all the opcodes. These are used only
825 for debugging. The macro is referenced only in pcre_printint.c. */
826
827 #define OP_NAME_LIST \
828 "End", "\\A", "\\G", "\\K", "\\B", "\\b", "\\D", "\\d", \
829 "\\S", "\\s", "\\W", "\\w", "Any", "AllAny", "Anybyte", \
830 "notprop", "prop", "\\R", "\\H", "\\h", "\\V", "\\v", \
831 "extuni", "\\Z", "\\z", \
832 "Opt", "^", "$", "char", "charnc", "not", \
833 "*", "*?", "+", "+?", "?", "??", "{", "{", "{", \
834 "*+","++", "?+", "{", \
835 "*", "*?", "+", "+?", "?", "??", "{", "{", "{", \
836 "*+","++", "?+", "{", \
837 "*", "*?", "+", "+?", "?", "??", "{", "{", "{", \
838 "*+","++", "?+", "{", \
839 "*", "*?", "+", "+?", "?", "??", "{", "{", \
840 "class", "nclass", "xclass", "Ref", "Recurse", "Callout", \
841 "Alt", "Ket", "KetRmax", "KetRmin", "Assert", "Assert not", \
842 "AssertB", "AssertB not", "Reverse", \
843 "Once", "Bra", "CBra", "Cond", "SBra", "SCBra", "SCond", \
844 "Cond ref", "Cond rec", "Cond def", "Brazero", "Braminzero", \
845 "*PRUNE", "*SKIP", "*THEN", "*COMMIT", "*FAIL", "*ACCEPT", \
846 "Skip zero"
847
848
849 /* This macro defines the length of fixed length operations in the compiled
850 regex. The lengths are used when searching for specific things, and also in the
851 debugging printing of a compiled regex. We use a macro so that it can be
852 defined close to the definitions of the opcodes themselves.
853
854 As things have been extended, some of these are no longer fixed lenths, but are
855 minima instead. For example, the length of a single-character repeat may vary
856 in UTF-8 mode. The code that uses this table must know about such things. */
857
858 #define OP_LENGTHS \
859 1, /* End */ \
860 1, 1, 1, 1, 1, /* \A, \G, \K, \B, \b */ \
861 1, 1, 1, 1, 1, 1, /* \D, \d, \S, \s, \W, \w */ \
862 1, 1, 1, /* Any, AllAny, Anybyte */ \
863 3, 3, 1, /* NOTPROP, PROP, EXTUNI */ \
864 1, 1, 1, 1, 1, /* \R, \H, \h, \V, \v */ \
865 1, 1, 2, 1, 1, /* \Z, \z, Opt, ^, $ */ \
866 2, /* Char - the minimum length */ \
867 2, /* Charnc - the minimum length */ \
868 2, /* not */ \
869 /* Positive single-char repeats ** These are */ \
870 2, 2, 2, 2, 2, 2, /* *, *?, +, +?, ?, ?? ** minima in */ \
871 4, 4, 4, /* upto, minupto, exact ** UTF-8 mode */ \
872 2, 2, 2, 4, /* *+, ++, ?+, upto+ */ \
873 /* Negative single-char repeats - only for chars < 256 */ \
874 2, 2, 2, 2, 2, 2, /* NOT *, *?, +, +?, ?, ?? */ \
875 4, 4, 4, /* NOT upto, minupto, exact */ \
876 2, 2, 2, 4, /* Possessive *, +, ?, upto */ \
877 /* Positive type repeats */ \
878 2, 2, 2, 2, 2, 2, /* Type *, *?, +, +?, ?, ?? */ \
879 4, 4, 4, /* Type upto, minupto, exact */ \
880 2, 2, 2, 4, /* Possessive *+, ++, ?+, upto+ */ \
881 /* Character class & ref repeats */ \
882 1, 1, 1, 1, 1, 1, /* *, *?, +, +?, ?, ?? */ \
883 5, 5, /* CRRANGE, CRMINRANGE */ \
884 33, /* CLASS */ \
885 33, /* NCLASS */ \
886 0, /* XCLASS - variable length */ \
887 3, /* REF */ \
888 1+LINK_SIZE, /* RECURSE */ \
889 2+2*LINK_SIZE, /* CALLOUT */ \
890 1+LINK_SIZE, /* Alt */ \
891 1+LINK_SIZE, /* Ket */ \
892 1+LINK_SIZE, /* KetRmax */ \
893 1+LINK_SIZE, /* KetRmin */ \
894 1+LINK_SIZE, /* Assert */ \
895 1+LINK_SIZE, /* Assert not */ \
896 1+LINK_SIZE, /* Assert behind */ \
897 1+LINK_SIZE, /* Assert behind not */ \
898 1+LINK_SIZE, /* Reverse */ \
899 1+LINK_SIZE, /* ONCE */ \
900 1+LINK_SIZE, /* BRA */ \
901 3+LINK_SIZE, /* CBRA */ \
902 1+LINK_SIZE, /* COND */ \
903 1+LINK_SIZE, /* SBRA */ \
904 3+LINK_SIZE, /* SCBRA */ \
905 1+LINK_SIZE, /* SCOND */ \
906 3, /* CREF */ \
907 3, /* RREF */ \
908 1, /* DEF */ \
909 1, 1, /* BRAZERO, BRAMINZERO */ \
910 1, 1, 1, 1, /* PRUNE, SKIP, THEN, COMMIT, */ \
911 1, 1, 1 /* FAIL, ACCEPT, SKIPZERO */
912
913
914 /* A magic value for OP_RREF to indicate the "any recursion" condition. */
915
916 #define RREF_ANY 0xffff
917
918 /* Error code numbers. They are given names so that they can more easily be
919 tracked. */
920
921 enum { ERR0, ERR1, ERR2, ERR3, ERR4, ERR5, ERR6, ERR7, ERR8, ERR9,
922 ERR10, ERR11, ERR12, ERR13, ERR14, ERR15, ERR16, ERR17, ERR18, ERR19,
923 ERR20, ERR21, ERR22, ERR23, ERR24, ERR25, ERR26, ERR27, ERR28, ERR29,
924 ERR30, ERR31, ERR32, ERR33, ERR34, ERR35, ERR36, ERR37, ERR38, ERR39,
925 ERR40, ERR41, ERR42, ERR43, ERR44, ERR45, ERR46, ERR47, ERR48, ERR49,
926 ERR50, ERR51, ERR52, ERR53, ERR54, ERR55, ERR56, ERR57, ERR58, ERR59,
927 ERR60, ERR61, ERR62, ERR63, ERR64 };
928
929 /* The real format of the start of the pcre block; the index of names and the
930 code vector run on as long as necessary after the end. We store an explicit
931 offset to the name table so that if a regex is compiled on one host, saved, and
932 then run on another where the size of pointers is different, all might still
933 be well. For the case of compiled-on-4 and run-on-8, we include an extra
934 pointer that is always NULL. For future-proofing, a few dummy fields were
935 originally included - even though you can never get this planning right - but
936 there is only one left now.
937
938 NOTE NOTE NOTE:
939 Because people can now save and re-use compiled patterns, any additions to this
940 structure should be made at the end, and something earlier (e.g. a new
941 flag in the options or one of the dummy fields) should indicate that the new
942 fields are present. Currently PCRE always sets the dummy fields to zero.
943 NOTE NOTE NOTE:
944 */
945
946 typedef struct real_pcre {
947 pcre_uint32 magic_number;
948 pcre_uint32 size; /* Total that was malloced */
949 pcre_uint32 options; /* Public options */
950 pcre_uint16 flags; /* Private flags */
951 pcre_uint16 dummy1; /* For future use */
952 pcre_uint16 top_bracket;
953 pcre_uint16 top_backref;
954 pcre_uint16 first_byte;
955 pcre_uint16 req_byte;
956 pcre_uint16 name_table_offset; /* Offset to name table that follows */
957 pcre_uint16 name_entry_size; /* Size of any name items */
958 pcre_uint16 name_count; /* Number of name items */
959 pcre_uint16 ref_count; /* Reference count */
960
961 const unsigned char *tables; /* Pointer to tables or NULL for std */
962 const unsigned char *nullpad; /* NULL padding */
963 } real_pcre;
964
965 /* The format of the block used to store data from pcre_study(). The same
966 remark (see NOTE above) about extending this structure applies. */
967
968 typedef struct pcre_study_data {
969 pcre_uint32 size; /* Total that was malloced */
970 pcre_uint32 options;
971 uschar start_bits[32];
972 } pcre_study_data;
973
974 /* Structure for passing "static" information around between the functions
975 doing the compiling, so that they are thread-safe. */
976
977 typedef struct compile_data {
978 const uschar *lcc; /* Points to lower casing table */
979 const uschar *fcc; /* Points to case-flipping table */
980 const uschar *cbits; /* Points to character type table */
981 const uschar *ctypes; /* Points to table of type maps */
982 const uschar *start_workspace;/* The start of working space */
983 const uschar *start_code; /* The start of the compiled code */
984 const uschar *start_pattern; /* The start of the pattern */
985 const uschar *end_pattern; /* The end of the pattern */
986 uschar *hwm; /* High watermark of workspace */
987 uschar *name_table; /* The name/number table */
988 int names_found; /* Number of entries so far */
989 int name_entry_size; /* Size of each entry */
990 int bracount; /* Count of capturing parens as we compile */
991 int final_bracount; /* Saved value after first pass */
992 int top_backref; /* Maximum back reference */
993 unsigned int backref_map; /* Bitmap of low back refs */
994 int external_options; /* External (initial) options */
995 int external_flags; /* External flag bits to be set */
996 int req_varyopt; /* "After variable item" flag for reqbyte */
997 BOOL had_accept; /* (*ACCEPT) encountered */
998 int nltype; /* Newline type */
999 int nllen; /* Newline string length */
1000 uschar nl[4]; /* Newline string when fixed length */
1001 } compile_data;
1002
1003 /* Structure for maintaining a chain of pointers to the currently incomplete
1004 branches, for testing for left recursion. */
1005
1006 typedef struct branch_chain {
1007 struct branch_chain *outer;
1008 uschar *current;
1009 } branch_chain;
1010
1011 /* Structure for items in a linked list that represents an explicit recursive
1012 call within the pattern. */
1013
1014 typedef struct recursion_info {
1015 struct recursion_info *prevrec; /* Previous recursion record (or NULL) */
1016 int group_num; /* Number of group that was called */
1017 const uschar *after_call; /* "Return value": points after the call in the expr */
1018 USPTR save_start; /* Old value of mstart */
1019 int *offset_save; /* Pointer to start of saved offsets */
1020 int saved_max; /* Number of saved offsets */
1021 } recursion_info;
1022
1023 /* Structure for building a chain of data for holding the values of the subject
1024 pointer at the start of each subpattern, so as to detect when an empty string
1025 has been matched by a subpattern - to break infinite loops. */
1026
1027 typedef struct eptrblock {
1028 struct eptrblock *epb_prev;
1029 USPTR epb_saved_eptr;
1030 } eptrblock;
1031
1032
1033 /* Structure for passing "static" information around between the functions
1034 doing traditional NFA matching, so that they are thread-safe. */
1035
1036 typedef struct match_data {
1037 unsigned long int match_call_count; /* As it says */
1038 unsigned long int match_limit; /* As it says */
1039 unsigned long int match_limit_recursion; /* As it says */
1040 int *offset_vector; /* Offset vector */
1041 int offset_end; /* One past the end */
1042 int offset_max; /* The maximum usable for return data */
1043 int nltype; /* Newline type */
1044 int nllen; /* Newline string length */
1045 uschar nl[4]; /* Newline string when fixed */
1046 const uschar *lcc; /* Points to lower casing table */
1047 const uschar *ctypes; /* Points to table of type maps */
1048 BOOL offset_overflow; /* Set if too many extractions */
1049 BOOL notbol; /* NOTBOL flag */
1050 BOOL noteol; /* NOTEOL flag */
1051 BOOL utf8; /* UTF8 flag */
1052 BOOL jscript_compat; /* JAVASCRIPT_COMPAT flag */
1053 BOOL endonly; /* Dollar not before final \n */
1054 BOOL notempty; /* Empty string match not wanted */
1055 BOOL partial; /* PARTIAL flag */
1056 BOOL hitend; /* Hit the end of the subject at some point */
1057 BOOL bsr_anycrlf; /* \R is just any CRLF, not full Unicode */
1058 const uschar *start_code; /* For use when recursing */
1059 USPTR start_subject; /* Start of the subject string */
1060 USPTR end_subject; /* End of the subject string */
1061 USPTR start_match_ptr; /* Start of matched string */
1062 USPTR end_match_ptr; /* Subject position at end match */
1063 int end_offset_top; /* Highwater mark at end of match */
1064 int capture_last; /* Most recent capture number */
1065 int start_offset; /* The start offset value */
1066 eptrblock *eptrchain; /* Chain of eptrblocks for tail recursions */
1067 int eptrn; /* Next free eptrblock */
1068 recursion_info *recursive; /* Linked list of recursion data */
1069 void *callout_data; /* To pass back to callouts */
1070 } match_data;
1071
1072 /* A similar structure is used for the same purpose by the DFA matching
1073 functions. */
1074
1075 typedef struct dfa_match_data {
1076 const uschar *start_code; /* Start of the compiled pattern */
1077 const uschar *start_subject; /* Start of the subject string */
1078 const uschar *end_subject; /* End of subject string */
1079 const uschar *tables; /* Character tables */
1080 int moptions; /* Match options */
1081 int poptions; /* Pattern options */
1082 int nltype; /* Newline type */
1083 int nllen; /* Newline string length */
1084 uschar nl[4]; /* Newline string when fixed */
1085 void *callout_data; /* To pass back to callouts */
1086 } dfa_match_data;
1087
1088 /* Bit definitions for entries in the pcre_ctypes table. */
1089
1090 #define ctype_space 0x01
1091 #define ctype_letter 0x02
1092 #define ctype_digit 0x04
1093 #define ctype_xdigit 0x08
1094 #define ctype_word 0x10 /* alphanumeric or '_' */
1095 #define ctype_meta 0x80 /* regexp meta char or zero (end pattern) */
1096
1097 /* Offsets for the bitmap tables in pcre_cbits. Each table contains a set
1098 of bits for a class map. Some classes are built by combining these tables. */
1099
1100 #define cbit_space 0 /* [:space:] or \s */
1101 #define cbit_xdigit 32 /* [:xdigit:] */
1102 #define cbit_digit 64 /* [:digit:] or \d */
1103 #define cbit_upper 96 /* [:upper:] */
1104 #define cbit_lower 128 /* [:lower:] */
1105 #define cbit_word 160 /* [:word:] or \w */
1106 #define cbit_graph 192 /* [:graph:] */
1107 #define cbit_print 224 /* [:print:] */
1108 #define cbit_punct 256 /* [:punct:] */
1109 #define cbit_cntrl 288 /* [:cntrl:] */
1110 #define cbit_length 320 /* Length of the cbits table */
1111
1112 /* Offsets of the various tables from the base tables pointer, and
1113 total length. */
1114
1115 #define lcc_offset 0
1116 #define fcc_offset 256
1117 #define cbits_offset 512
1118 #define ctypes_offset (cbits_offset + cbit_length)
1119 #define tables_length (ctypes_offset + 256)
1120
1121 /* Layout of the UCP type table that translates property names into types and
1122 codes. Each entry used to point directly to a name, but to reduce the number of
1123 relocations in shared libraries, it now has an offset into a single string
1124 instead. */
1125
1126 typedef struct {
1127 pcre_uint16 name_offset;
1128 pcre_uint16 type;
1129 pcre_uint16 value;
1130 } ucp_type_table;
1131
1132
1133 /* Internal shared data tables. These are tables that are used by more than one
1134 of the exported public functions. They have to be "external" in the C sense,
1135 but are not part of the PCRE public API. The data for these tables is in the
1136 pcre_tables.c module. */
1137
1138 extern const int _pcre_utf8_table1[];
1139 extern const int _pcre_utf8_table2[];
1140 extern const int _pcre_utf8_table3[];
1141 extern const uschar _pcre_utf8_table4[];
1142
1143 extern const int _pcre_utf8_table1_size;
1144
1145 extern const char _pcre_utt_names[];
1146 extern const ucp_type_table _pcre_utt[];
1147 extern const int _pcre_utt_size;
1148
1149 extern const uschar _pcre_default_tables[];
1150
1151 extern const uschar _pcre_OP_lengths[];
1152
1153
1154 /* Internal shared functions. These are functions that are used by more than
1155 one of the exported public functions. They have to be "external" in the C
1156 sense, but are not part of the PCRE public API. */
1157
1158 extern BOOL _pcre_is_newline(const uschar *, int, const uschar *,
1159 int *, BOOL);
1160 extern int _pcre_ord2utf8(int, uschar *);
1161 extern real_pcre *_pcre_try_flipped(const real_pcre *, real_pcre *,
1162 const pcre_study_data *, pcre_study_data *);
1163 extern int _pcre_valid_utf8(const uschar *, int);
1164 extern BOOL _pcre_was_newline(const uschar *, int, const uschar *,
1165 int *, BOOL);
1166 extern BOOL _pcre_xclass(int, const uschar *);
1167
1168
1169 /* Unicode character database (UCD) */
1170
1171 typedef struct {
1172 uschar script;
1173 uschar chartype;
1174 pcre_int32 other_case;
1175 } ucd_record;
1176
1177 extern const ucd_record _pcre_ucd_records[];
1178 extern const uschar _pcre_ucd_stage1[];
1179 extern const pcre_uint16 _pcre_ucd_stage2[];
1180 extern const int _pcre_ucp_gentype[];
1181
1182
1183 /* UCD access macros */
1184
1185 #define UCD_BLOCK_SIZE 128
1186 #define GET_UCD(ch) (_pcre_ucd_records + \
1187 _pcre_ucd_stage2[_pcre_ucd_stage1[(ch) / UCD_BLOCK_SIZE] * \
1188 UCD_BLOCK_SIZE + ch % UCD_BLOCK_SIZE])
1189
1190 #define UCD_CHARTYPE(ch) GET_UCD(ch)->chartype
1191 #define UCD_SCRIPT(ch) GET_UCD(ch)->script
1192 #define UCD_CATEGORY(ch) _pcre_ucp_gentype[UCD_CHARTYPE(ch)]
1193 #define UCD_OTHERCASE(ch) (ch + GET_UCD(ch)->other_case)
1194
1195 #endif
1196
1197 /* End of pcre_internal.h */

Properties

Name Value
svn:eol-style native
svn:keywords "Author Date Id Revision Url"

webmaster@exim.org
ViewVC Help
Powered by ViewVC 1.1.12