/[pcre]/code/trunk/pcre_exec.c
ViewVC logotype

Diff of /code/trunk/pcre_exec.c

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 455 by ph10, Sat Sep 26 19:12:32 2009 UTC revision 733 by ph10, Tue Oct 11 10:29:36 2011 UTC
# Line 6  Line 6 
6  and semantics are as close as possible to those of the Perl 5 language.  and semantics are as close as possible to those of the Perl 5 language.
7    
8                         Written by Philip Hazel                         Written by Philip Hazel
9             Copyright (c) 1997-2009 University of Cambridge             Copyright (c) 1997-2011 University of Cambridge
10    
11  -----------------------------------------------------------------------------  -----------------------------------------------------------------------------
12  Redistribution and use in source and binary forms, with or without  Redistribution and use in source and binary forms, with or without
# Line 57  possible. There are also some static sup Line 57  possible. There are also some static sup
57  #undef min  #undef min
58  #undef max  #undef max
59    
60  /* Flag bits for the match() function */  /* Values for setting in md->match_function_type to indicate two special types
61    of call to match(). We do it this way to save on using another stack variable,
62    as stack usage is to be discouraged. */
63    
64  #define match_condassert     0x01  /* Called to check a condition assertion */  #define MATCH_CONDASSERT     1  /* Called to check a condition assertion */
65  #define match_cbegroup       0x02  /* Could-be-empty unlimited repeat group */  #define MATCH_CBEGROUP       2  /* Could-be-empty unlimited repeat group */
66    
67  /* Non-error returns from the match() function. Error returns are externally  /* Non-error returns from the match() function. Error returns are externally
68  defined PCRE_ERROR_xxx codes, which are all negative. */  defined PCRE_ERROR_xxx codes, which are all negative. */
# Line 71  defined PCRE_ERROR_xxx codes, which are Line 73  defined PCRE_ERROR_xxx codes, which are
73  /* Special internal returns from the match() function. Make them sufficiently  /* Special internal returns from the match() function. Make them sufficiently
74  negative to avoid the external error codes. */  negative to avoid the external error codes. */
75    
76  #define MATCH_COMMIT       (-999)  #define MATCH_ACCEPT       (-999)
77  #define MATCH_PRUNE        (-998)  #define MATCH_COMMIT       (-998)
78  #define MATCH_SKIP         (-997)  #define MATCH_KETRPOS      (-997)
79  #define MATCH_THEN         (-996)  #define MATCH_ONCE         (-996)
80    #define MATCH_PRUNE        (-995)
81    #define MATCH_SKIP         (-994)
82    #define MATCH_SKIP_ARG     (-993)
83    #define MATCH_THEN         (-992)
84    
85    /* This is a convenience macro for code that occurs many times. */
86    
87    #define MRRETURN(ra) \
88      { \
89      md->mark = markptr; \
90      RRETURN(ra); \
91      }
92    
93  /* Maximum number of ints of offset to save on the stack for recursive calls.  /* Maximum number of ints of offset to save on the stack for recursive calls.
94  If the offset vector is bigger, malloc is used. This should be a multiple of 3,  If the offset vector is bigger, malloc is used. This should be a multiple of 3,
# Line 89  static const char rep_max[] = { 0, 0, 0, Line 103  static const char rep_max[] = { 0, 0, 0,
103    
104    
105    
106  #ifdef DEBUG  #ifdef PCRE_DEBUG
107  /*************************************************  /*************************************************
108  *        Debugging function to print chars       *  *        Debugging function to print chars       *
109  *************************************************/  *************************************************/
# Line 122  while (length-- > 0) Line 136  while (length-- > 0)
136  *          Match a back-reference                *  *          Match a back-reference                *
137  *************************************************/  *************************************************/
138    
139  /* If a back reference hasn't been set, the length that is passed is greater  /* Normally, if a back reference hasn't been set, the length that is passed is
140  than the number of characters left in the string, so the match fails.  negative, so the match always fails. However, in JavaScript compatibility mode,
141    the length passed is zero. Note that in caseless UTF-8 mode, the number of
142    subject bytes matched may be different to the number of reference bytes.
143    
144  Arguments:  Arguments:
145    offset      index into the offset vector    offset      index into the offset vector
146    eptr        points into the subject    eptr        pointer into the subject
147    length      length to be matched    length      length of reference to be matched (number of bytes)
148    md          points to match data block    md          points to match data block
149    ims         the ims flags    caseless    TRUE if caseless
150    
151  Returns:      TRUE if matched  Returns:      < 0 if not matched, otherwise the number of subject bytes matched
152  */  */
153    
154  static BOOL  static int
155  match_ref(int offset, register USPTR eptr, int length, match_data *md,  match_ref(int offset, register USPTR eptr, int length, match_data *md,
156    unsigned long int ims)    BOOL caseless)
157  {  {
158  USPTR p = md->start_subject + md->offset_vector[offset];  USPTR eptr_start = eptr;
159    register USPTR p = md->start_subject + md->offset_vector[offset];
160    
161  #ifdef DEBUG  #ifdef PCRE_DEBUG
162  if (eptr >= md->end_subject)  if (eptr >= md->end_subject)
163    printf("matching subject <null>");    printf("matching subject <null>");
164  else  else
# Line 154  pchars(p, length, FALSE, md); Line 171  pchars(p, length, FALSE, md);
171  printf("\n");  printf("\n");
172  #endif  #endif
173    
174  /* Always fail if not enough characters left */  /* Always fail if reference not set (and not JavaScript compatible). */
175    
176  if (length > md->end_subject - eptr) return FALSE;  if (length < 0) return -1;
177    
178  /* Separate the caseless case for speed. In UTF-8 mode we can only do this  /* Separate the caseless case for speed. In UTF-8 mode we can only do this
179  properly if Unicode properties are supported. Otherwise, we can check only  properly if Unicode properties are supported. Otherwise, we can check only
180  ASCII characters. */  ASCII characters. */
181    
182  if ((ims & PCRE_CASELESS) != 0)  if (caseless)
183    {    {
184  #ifdef SUPPORT_UTF8  #ifdef SUPPORT_UTF8
185  #ifdef SUPPORT_UCP  #ifdef SUPPORT_UCP
186    if (md->utf8)    if (md->utf8)
187      {      {
188      USPTR endptr = eptr + length;      /* Match characters up to the end of the reference. NOTE: the number of
189      while (eptr < endptr)      bytes matched may differ, because there are some characters whose upper and
190        lower case versions code as different numbers of bytes. For example, U+023A
191        (2 bytes in UTF-8) is the upper case version of U+2C65 (3 bytes in UTF-8);
192        a sequence of 3 of the former uses 6 bytes, as does a sequence of two of
193        the latter. It is important, therefore, to check the length along the
194        reference, not along the subject (earlier code did this wrong). */
195    
196        USPTR endptr = p + length;
197        while (p < endptr)
198        {        {
199        int c, d;        int c, d;
200          if (eptr >= md->end_subject) return -1;
201        GETCHARINC(c, eptr);        GETCHARINC(c, eptr);
202        GETCHARINC(d, p);        GETCHARINC(d, p);
203        if (c != d && c != UCD_OTHERCASE(d)) return FALSE;        if (c != d && c != UCD_OTHERCASE(d)) return -1;
204        }        }
205      }      }
206    else    else
# Line 183  if ((ims & PCRE_CASELESS) != 0) Line 209  if ((ims & PCRE_CASELESS) != 0)
209    
210    /* The same code works when not in UTF-8 mode and in UTF-8 mode when there    /* The same code works when not in UTF-8 mode and in UTF-8 mode when there
211    is no UCP support. */    is no UCP support. */
212        {
213    while (length-- > 0)      if (eptr + length > md->end_subject) return -1;
214      { if (md->lcc[*p++] != md->lcc[*eptr++]) return FALSE; }      while (length-- > 0)
215          { if (md->lcc[*p++] != md->lcc[*eptr++]) return -1; }
216        }
217    }    }
218    
219  /* In the caseful case, we can just compare the bytes, whether or not we  /* In the caseful case, we can just compare the bytes, whether or not we
220  are in UTF-8 mode. */  are in UTF-8 mode. */
221    
222  else  else
223    { while (length-- > 0) if (*p++ != *eptr++) return FALSE; }    {
224      if (eptr + length > md->end_subject) return -1;
225      while (length-- > 0) if (*p++ != *eptr++) return -1;
226      }
227    
228  return TRUE;  return eptr - eptr_start;
229  }  }
230    
231    
# Line 245  enum { RM1=1, RM2, RM3, RM4, RM5, RM Line 276  enum { RM1=1, RM2, RM3, RM4, RM5, RM
276         RM21,  RM22, RM23, RM24, RM25, RM26, RM27, RM28, RM29, RM30,         RM21,  RM22, RM23, RM24, RM25, RM26, RM27, RM28, RM29, RM30,
277         RM31,  RM32, RM33, RM34, RM35, RM36, RM37, RM38, RM39, RM40,         RM31,  RM32, RM33, RM34, RM35, RM36, RM37, RM38, RM39, RM40,
278         RM41,  RM42, RM43, RM44, RM45, RM46, RM47, RM48, RM49, RM50,         RM41,  RM42, RM43, RM44, RM45, RM46, RM47, RM48, RM49, RM50,
279         RM51,  RM52, RM53, RM54 };         RM51,  RM52, RM53, RM54, RM55, RM56, RM57, RM58, RM59, RM60,
280           RM61,  RM62, RM63, RM64, RM65, RM66 };
281    
282  /* These versions of the macros use the stack, as normal. There are debugging  /* These versions of the macros use the stack, as normal. There are debugging
283  versions and production versions. Note that the "rw" argument of RMATCH isn't  versions and production versions. Note that the "rw" argument of RMATCH isn't
284  actuall used in this definition. */  actually used in this definition. */
285    
286  #ifndef NO_RECURSE  #ifndef NO_RECURSE
287  #define REGISTER register  #define REGISTER register
288    
289  #ifdef DEBUG  #ifdef PCRE_DEBUG
290  #define RMATCH(ra,rb,rc,rd,re,rf,rg,rw) \  #define RMATCH(ra,rb,rc,rd,re,rw) \
291    { \    { \
292    printf("match() called in line %d\n", __LINE__); \    printf("match() called in line %d\n", __LINE__); \
293    rrc = match(ra,rb,mstart,rc,rd,re,rf,rg,rdepth+1); \    rrc = match(ra,rb,mstart,markptr,rc,rd,re,rdepth+1); \
294    printf("to line %d\n", __LINE__); \    printf("to line %d\n", __LINE__); \
295    }    }
296  #define RRETURN(ra) \  #define RRETURN(ra) \
# Line 267  actuall used in this definition. */ Line 299  actuall used in this definition. */
299    return ra; \    return ra; \
300    }    }
301  #else  #else
302  #define RMATCH(ra,rb,rc,rd,re,rf,rg,rw) \  #define RMATCH(ra,rb,rc,rd,re,rw) \
303    rrc = match(ra,rb,mstart,rc,rd,re,rf,rg,rdepth+1)    rrc = match(ra,rb,mstart,markptr,rc,rd,re,rdepth+1)
304  #define RRETURN(ra) return ra  #define RRETURN(ra) return ra
305  #endif  #endif
306    
# Line 281  argument of match(), which never changes Line 313  argument of match(), which never changes
313    
314  #define REGISTER  #define REGISTER
315    
316  #define RMATCH(ra,rb,rc,rd,re,rf,rg,rw)\  #define RMATCH(ra,rb,rc,rd,re,rw)\
317    {\    {\
318    heapframe *newframe = (pcre_stack_malloc)(sizeof(heapframe));\    heapframe *newframe = (heapframe *)(pcre_stack_malloc)(sizeof(heapframe));\
319      if (newframe == NULL) RRETURN(PCRE_ERROR_NOMEMORY);\
320    frame->Xwhere = rw; \    frame->Xwhere = rw; \
321    newframe->Xeptr = ra;\    newframe->Xeptr = ra;\
322    newframe->Xecode = rb;\    newframe->Xecode = rb;\
323    newframe->Xmstart = mstart;\    newframe->Xmstart = mstart;\
324      newframe->Xmarkptr = markptr;\
325    newframe->Xoffset_top = rc;\    newframe->Xoffset_top = rc;\
326    newframe->Xims = re;\    newframe->Xeptrb = re;\
   newframe->Xeptrb = rf;\  
   newframe->Xflags = rg;\  
327    newframe->Xrdepth = frame->Xrdepth + 1;\    newframe->Xrdepth = frame->Xrdepth + 1;\
328    newframe->Xprevframe = frame;\    newframe->Xprevframe = frame;\
329    frame = newframe;\    frame = newframe;\
# Line 303  argument of match(), which never changes Line 335  argument of match(), which never changes
335    
336  #define RRETURN(ra)\  #define RRETURN(ra)\
337    {\    {\
338    heapframe *newframe = frame;\    heapframe *oldframe = frame;\
339    frame = newframe->Xprevframe;\    frame = oldframe->Xprevframe;\
340    (pcre_stack_free)(newframe);\    (pcre_stack_free)(oldframe);\
341    if (frame != NULL)\    if (frame != NULL)\
342      {\      {\
343      rrc = ra;\      rrc = ra;\
# Line 325  typedef struct heapframe { Line 357  typedef struct heapframe {
357    USPTR Xeptr;    USPTR Xeptr;
358    const uschar *Xecode;    const uschar *Xecode;
359    USPTR Xmstart;    USPTR Xmstart;
360      USPTR Xmarkptr;
361    int Xoffset_top;    int Xoffset_top;
   long int Xims;  
362    eptrblock *Xeptrb;    eptrblock *Xeptrb;
   int Xflags;  
363    unsigned int Xrdepth;    unsigned int Xrdepth;
364    
365    /* Function local variables */    /* Function local variables */
# Line 349  typedef struct heapframe { Line 380  typedef struct heapframe {
380    BOOL Xcondition;    BOOL Xcondition;
381    BOOL Xprev_is_word;    BOOL Xprev_is_word;
382    
   unsigned long int Xoriginal_ims;  
   
383  #ifdef SUPPORT_UCP  #ifdef SUPPORT_UCP
384    int Xprop_type;    int Xprop_type;
385    int Xprop_value;    int Xprop_value;
386    int Xprop_fail_result;    int Xprop_fail_result;
   int Xprop_category;  
   int Xprop_chartype;  
   int Xprop_script;  
387    int Xoclength;    int Xoclength;
388    uschar Xocchars[8];    uschar Xocchars[8];
389  #endif  #endif
# Line 408  immediately. The second one is used when Line 434  immediately. The second one is used when
434  the subject. */  the subject. */
435    
436  #define CHECK_PARTIAL()\  #define CHECK_PARTIAL()\
437    if (md->partial != 0 && eptr >= md->end_subject && eptr > mstart)\    if (md->partial != 0 && eptr >= md->end_subject && \
438      {\        eptr > md->start_used_ptr) \
439      md->hitend = TRUE;\      { \
440      if (md->partial > 1) RRETURN(PCRE_ERROR_PARTIAL);\      md->hitend = TRUE; \
441        if (md->partial > 1) MRRETURN(PCRE_ERROR_PARTIAL); \
442      }      }
443    
444  #define SCHECK_PARTIAL()\  #define SCHECK_PARTIAL()\
445    if (md->partial && eptr > mstart)\    if (md->partial != 0 && eptr > md->start_used_ptr) \
446      {\      { \
447      md->hitend = TRUE;\      md->hitend = TRUE; \
448      if (md->partial > 1) RRETURN(PCRE_ERROR_PARTIAL);\      if (md->partial > 1) MRRETURN(PCRE_ERROR_PARTIAL); \
449      }      }
450    
451    
# Line 432  Arguments: Line 459  Arguments:
459     ecode       pointer to current position in compiled code     ecode       pointer to current position in compiled code
460     mstart      pointer to the current match start position (can be modified     mstart      pointer to the current match start position (can be modified
461                   by encountering \K)                   by encountering \K)
462       markptr     pointer to the most recent MARK name, or NULL
463     offset_top  current top pointer     offset_top  current top pointer
464     md          pointer to "static" info for the match     md          pointer to "static" info for the match
    ims         current /i, /m, and /s options  
465     eptrb       pointer to chain of blocks containing eptr at start of     eptrb       pointer to chain of blocks containing eptr at start of
466                   brackets - for testing for empty matches                   brackets - for testing for empty matches
    flags       can contain  
                  match_condassert - this is an assertion condition  
                  match_cbegroup - this is the start of an unlimited repeat  
                    group that can match an empty string  
467     rdepth      the recursion depth     rdepth      the recursion depth
468    
469  Returns:       MATCH_MATCH if matched            )  these values are >= 0  Returns:       MATCH_MATCH if matched            )  these values are >= 0
470                 MATCH_NOMATCH if failed to match  )                 MATCH_NOMATCH if failed to match  )
471                   a negative MATCH_xxx value for PRUNE, SKIP, etc
472                 a negative PCRE_ERROR_xxx value if aborted by an error condition                 a negative PCRE_ERROR_xxx value if aborted by an error condition
473                   (e.g. stopped by repeated call or recursion limit)                   (e.g. stopped by repeated call or recursion limit)
474  */  */
475    
476  static int  static int
477  match(REGISTER USPTR eptr, REGISTER const uschar *ecode, USPTR mstart,  match(REGISTER USPTR eptr, REGISTER const uschar *ecode, USPTR mstart,
478    int offset_top, match_data *md, unsigned long int ims, eptrblock *eptrb,    const uschar *markptr, int offset_top, match_data *md, eptrblock *eptrb,
479    int flags, unsigned int rdepth)    unsigned int rdepth)
480  {  {
481  /* These variables do not need to be preserved over recursion in this function,  /* These variables do not need to be preserved over recursion in this function,
482  so they can be ordinary variables in all cases. Mark some of them with  so they can be ordinary variables in all cases. Mark some of them with
# Line 464  register unsigned int c; /* Character Line 488  register unsigned int c; /* Character
488  register BOOL utf8;        /* Local copy of UTF-8 flag for speed */  register BOOL utf8;        /* Local copy of UTF-8 flag for speed */
489    
490  BOOL minimize, possessive; /* Quantifier options */  BOOL minimize, possessive; /* Quantifier options */
491    BOOL caseless;
492  int condcode;  int condcode;
493    
494  /* When recursion is not being used, all "local" variables that have to be  /* When recursion is not being used, all "local" variables that have to be
# Line 472  heap storage. Set up the top-level frame Line 497  heap storage. Set up the top-level frame
497  heap whenever RMATCH() does a "recursion". See the macro definitions above. */  heap whenever RMATCH() does a "recursion". See the macro definitions above. */
498    
499  #ifdef NO_RECURSE  #ifdef NO_RECURSE
500  heapframe *frame = (pcre_stack_malloc)(sizeof(heapframe));  heapframe *frame = (heapframe *)(pcre_stack_malloc)(sizeof(heapframe));
501    if (frame == NULL) RRETURN(PCRE_ERROR_NOMEMORY);
502  frame->Xprevframe = NULL;            /* Marks the top level */  frame->Xprevframe = NULL;            /* Marks the top level */
503    
504  /* Copy in the original argument variables */  /* Copy in the original argument variables */
# Line 480  frame->Xprevframe = NULL; /* Line 506  frame->Xprevframe = NULL; /*
506  frame->Xeptr = eptr;  frame->Xeptr = eptr;
507  frame->Xecode = ecode;  frame->Xecode = ecode;
508  frame->Xmstart = mstart;  frame->Xmstart = mstart;
509    frame->Xmarkptr = markptr;
510  frame->Xoffset_top = offset_top;  frame->Xoffset_top = offset_top;
 frame->Xims = ims;  
511  frame->Xeptrb = eptrb;  frame->Xeptrb = eptrb;
 frame->Xflags = flags;  
512  frame->Xrdepth = rdepth;  frame->Xrdepth = rdepth;
513    
514  /* This is where control jumps back to to effect "recursion" */  /* This is where control jumps back to to effect "recursion" */
# Line 495  HEAP_RECURSE: Line 520  HEAP_RECURSE:
520  #define eptr               frame->Xeptr  #define eptr               frame->Xeptr
521  #define ecode              frame->Xecode  #define ecode              frame->Xecode
522  #define mstart             frame->Xmstart  #define mstart             frame->Xmstart
523    #define markptr            frame->Xmarkptr
524  #define offset_top         frame->Xoffset_top  #define offset_top         frame->Xoffset_top
 #define ims                frame->Xims  
525  #define eptrb              frame->Xeptrb  #define eptrb              frame->Xeptrb
 #define flags              frame->Xflags  
526  #define rdepth             frame->Xrdepth  #define rdepth             frame->Xrdepth
527    
528  /* Ditto for the local variables */  /* Ditto for the local variables */
# Line 520  HEAP_RECURSE: Line 544  HEAP_RECURSE:
544  #define condition          frame->Xcondition  #define condition          frame->Xcondition
545  #define prev_is_word       frame->Xprev_is_word  #define prev_is_word       frame->Xprev_is_word
546    
 #define original_ims       frame->Xoriginal_ims  
   
547  #ifdef SUPPORT_UCP  #ifdef SUPPORT_UCP
548  #define prop_type          frame->Xprop_type  #define prop_type          frame->Xprop_type
549  #define prop_value         frame->Xprop_value  #define prop_value         frame->Xprop_value
550  #define prop_fail_result   frame->Xprop_fail_result  #define prop_fail_result   frame->Xprop_fail_result
 #define prop_category      frame->Xprop_category  
 #define prop_chartype      frame->Xprop_chartype  
 #define prop_script        frame->Xprop_script  
551  #define oclength           frame->Xoclength  #define oclength           frame->Xoclength
552  #define occhars            frame->Xocchars  #define occhars            frame->Xocchars
553  #endif  #endif
# Line 558  i, and fc and c, can be the same variabl Line 577  i, and fc and c, can be the same variabl
577  #define fi i  #define fi i
578  #define fc c  #define fc c
579    
580    /* Many of the following variables are used only in small blocks of the code.
581    My normal style of coding would have declared them within each of those blocks.
582    However, in order to accommodate the version of this code that uses an external
583    "stack" implemented on the heap, it is easier to declare them all here, so the
584    declarations can be cut out in a block. The only declarations within blocks
585    below are for variables that do not have to be preserved over a recursive call
586    to RMATCH(). */
587    
588    #ifdef SUPPORT_UTF8
589    const uschar *charptr;
590    #endif
591    const uschar *callpat;
592    const uschar *data;
593    const uschar *next;
594    USPTR         pp;
595    const uschar *prev;
596    USPTR         saved_eptr;
597    
598  #ifdef SUPPORT_UTF8                /* Many of these variables are used only  */  recursion_info new_recursive;
599  const uschar *charptr;             /* in small blocks of the code. My normal */  
600  #endif                             /* style of coding would have declared    */  BOOL cur_is_word;
 const uschar *callpat;             /* them within each of those blocks.      */  
 const uschar *data;                /* However, in order to accommodate the   */  
 const uschar *next;                /* version of this code that uses an      */  
 USPTR         pp;                  /* external "stack" implemented on the    */  
 const uschar *prev;                /* heap, it is easier to declare them all */  
 USPTR         saved_eptr;          /* here, so the declarations can be cut   */  
                                    /* out in a block. The only declarations  */  
 recursion_info new_recursive;      /* within blocks below are for variables  */  
                                    /* that do not have to be preserved over  */  
 BOOL cur_is_word;                  /* a recursive call to RMATCH().          */  
601  BOOL condition;  BOOL condition;
602  BOOL prev_is_word;  BOOL prev_is_word;
603    
 unsigned long int original_ims;  
   
604  #ifdef SUPPORT_UCP  #ifdef SUPPORT_UCP
605  int prop_type;  int prop_type;
606  int prop_value;  int prop_value;
607  int prop_fail_result;  int prop_fail_result;
 int prop_category;  
 int prop_chartype;  
 int prop_script;  
608  int oclength;  int oclength;
609  uschar occhars[8];  uschar occhars[8];
610  #endif  #endif
# Line 603  int stacksave[REC_STACK_SAVE_MAX]; Line 624  int stacksave[REC_STACK_SAVE_MAX];
624  eptrblock newptrb;  eptrblock newptrb;
625  #endif     /* NO_RECURSE */  #endif     /* NO_RECURSE */
626    
627    /* To save space on the stack and in the heap frame, I have doubled up on some
628    of the local variables that are used only in localised parts of the code, but
629    still need to be preserved over recursive calls of match(). These macros define
630    the alternative names that are used. */
631    
632    #define allow_zero    cur_is_word
633    #define cbegroup      condition
634    #define code_offset   codelink
635    #define condassert    condition
636    #define matched_once  prev_is_word
637    
638  /* These statements are here to stop the compiler complaining about unitialized  /* These statements are here to stop the compiler complaining about unitialized
639  variables. */  variables. */
640    
# Line 622  TAIL_RECURSE: Line 654  TAIL_RECURSE:
654  /* OK, now we can get on with the real code of the function. Recursive calls  /* OK, now we can get on with the real code of the function. Recursive calls
655  are specified by the macro RMATCH and RRETURN is used to return. When  are specified by the macro RMATCH and RRETURN is used to return. When
656  NO_RECURSE is *not* defined, these just turn into a recursive call to match()  NO_RECURSE is *not* defined, these just turn into a recursive call to match()
657  and a "return", respectively (possibly with some debugging if DEBUG is  and a "return", respectively (possibly with some debugging if PCRE_DEBUG is
658  defined). However, RMATCH isn't like a function call because it's quite a  defined). However, RMATCH isn't like a function call because it's quite a
659  complicated macro. It has to be used in one particular way. This shouldn't,  complicated macro. It has to be used in one particular way. This shouldn't,
660  however, impact performance when true recursion is being used. */  however, impact performance when true recursion is being used. */
# Line 639  haven't exceeded the recursive call limi Line 671  haven't exceeded the recursive call limi
671  if (md->match_call_count++ >= md->match_limit) RRETURN(PCRE_ERROR_MATCHLIMIT);  if (md->match_call_count++ >= md->match_limit) RRETURN(PCRE_ERROR_MATCHLIMIT);
672  if (rdepth >= md->match_limit_recursion) RRETURN(PCRE_ERROR_RECURSIONLIMIT);  if (rdepth >= md->match_limit_recursion) RRETURN(PCRE_ERROR_RECURSIONLIMIT);
673    
 original_ims = ims;    /* Save for resetting on ')' */  
   
674  /* At the start of a group with an unlimited repeat that may match an empty  /* At the start of a group with an unlimited repeat that may match an empty
675  string, the match_cbegroup flag is set. When this is the case, add the current  string, the variable md->match_function_type is set to MATCH_CBEGROUP. It is
676  subject pointer to the chain of such remembered pointers, to be checked when we  done this way to save having to use another function argument, which would take
677  hit the closing ket, in order to break infinite loops that match no characters.  up space on the stack. See also MATCH_CONDASSERT below.
678  When match() is called in other circumstances, don't add to the chain. The  
679  match_cbegroup flag must NOT be used with tail recursion, because the memory  When MATCH_CBEGROUP is set, add the current subject pointer to the chain of
680  block that is used is on the stack, so a new one may be required for each  such remembered pointers, to be checked when we hit the closing ket, in order
681  match(). */  to break infinite loops that match no characters. When match() is called in
682    other circumstances, don't add to the chain. The MATCH_CBEGROUP feature must
683    NOT be used with tail recursion, because the memory block that is used is on
684    the stack, so a new one may be required for each match(). */
685    
686  if ((flags & match_cbegroup) != 0)  if (md->match_function_type == MATCH_CBEGROUP)
687    {    {
688    newptrb.epb_saved_eptr = eptr;    newptrb.epb_saved_eptr = eptr;
689    newptrb.epb_prev = eptrb;    newptrb.epb_prev = eptrb;
690    eptrb = &newptrb;    eptrb = &newptrb;
691      md->match_function_type = 0;
692    }    }
693    
694  /* Now start processing the opcodes. */  /* Now start processing the opcodes. */
# Line 666  for (;;) Line 700  for (;;)
700    
701    switch(op)    switch(op)
702      {      {
703        case OP_MARK:
704        markptr = ecode + 2;
705        RMATCH(eptr, ecode + _pcre_OP_lengths[*ecode] + ecode[1], offset_top, md,
706          eptrb, RM55);
707    
708        /* A return of MATCH_SKIP_ARG means that matching failed at SKIP with an
709        argument, and we must check whether that argument matches this MARK's
710        argument. It is passed back in md->start_match_ptr (an overloading of that
711        variable). If it does match, we reset that variable to the current subject
712        position and return MATCH_SKIP. Otherwise, pass back the return code
713        unaltered. */
714    
715        if (rrc == MATCH_SKIP_ARG &&
716            strcmp((char *)markptr, (char *)(md->start_match_ptr)) == 0)
717          {
718          md->start_match_ptr = eptr;
719          RRETURN(MATCH_SKIP);
720          }
721    
722        if (md->mark == NULL) md->mark = markptr;
723        RRETURN(rrc);
724    
725      case OP_FAIL:      case OP_FAIL:
726      RRETURN(MATCH_NOMATCH);      MRRETURN(MATCH_NOMATCH);
727    
728        /* COMMIT overrides PRUNE, SKIP, and THEN */
729    
730        case OP_COMMIT:
731        RMATCH(eptr, ecode + _pcre_OP_lengths[*ecode], offset_top, md,
732          eptrb, RM52);
733        if (rrc != MATCH_NOMATCH && rrc != MATCH_PRUNE &&
734            rrc != MATCH_SKIP && rrc != MATCH_SKIP_ARG &&
735            rrc != MATCH_THEN)
736          RRETURN(rrc);
737        MRRETURN(MATCH_COMMIT);
738    
739        /* PRUNE overrides THEN */
740    
741      case OP_PRUNE:      case OP_PRUNE:
742      RMATCH(eptr, ecode + _pcre_OP_lengths[*ecode], offset_top, md,      RMATCH(eptr, ecode + _pcre_OP_lengths[*ecode], offset_top, md,
743        ims, eptrb, flags, RM51);        eptrb, RM51);
744      if (rrc != MATCH_NOMATCH) RRETURN(rrc);      if (rrc != MATCH_NOMATCH && rrc != MATCH_THEN) RRETURN(rrc);
745        MRRETURN(MATCH_PRUNE);
746    
747        case OP_PRUNE_ARG:
748        RMATCH(eptr, ecode + _pcre_OP_lengths[*ecode] + ecode[1], offset_top, md,
749          eptrb, RM56);
750        if (rrc != MATCH_NOMATCH && rrc != MATCH_THEN) RRETURN(rrc);
751        md->mark = ecode + 2;
752      RRETURN(MATCH_PRUNE);      RRETURN(MATCH_PRUNE);
753    
754      case OP_COMMIT:      /* SKIP overrides PRUNE and THEN */
     RMATCH(eptr, ecode + _pcre_OP_lengths[*ecode], offset_top, md,  
       ims, eptrb, flags, RM52);  
     if (rrc != MATCH_NOMATCH) RRETURN(rrc);  
     RRETURN(MATCH_COMMIT);  
755    
756      case OP_SKIP:      case OP_SKIP:
757      RMATCH(eptr, ecode + _pcre_OP_lengths[*ecode], offset_top, md,      RMATCH(eptr, ecode + _pcre_OP_lengths[*ecode], offset_top, md,
758        ims, eptrb, flags, RM53);        eptrb, RM53);
759      if (rrc != MATCH_NOMATCH) RRETURN(rrc);      if (rrc != MATCH_NOMATCH && rrc != MATCH_PRUNE && rrc != MATCH_THEN)
760          RRETURN(rrc);
761      md->start_match_ptr = eptr;   /* Pass back current position */      md->start_match_ptr = eptr;   /* Pass back current position */
762      RRETURN(MATCH_SKIP);      MRRETURN(MATCH_SKIP);
763    
764        case OP_SKIP_ARG:
765        RMATCH(eptr, ecode + _pcre_OP_lengths[*ecode] + ecode[1], offset_top, md,
766          eptrb, RM57);
767        if (rrc != MATCH_NOMATCH && rrc != MATCH_PRUNE && rrc != MATCH_THEN)
768          RRETURN(rrc);
769    
770        /* Pass back the current skip name by overloading md->start_match_ptr and
771        returning the special MATCH_SKIP_ARG return code. This will either be
772        caught by a matching MARK, or get to the top, where it is treated the same
773        as PRUNE. */
774    
775        md->start_match_ptr = ecode + 2;
776        RRETURN(MATCH_SKIP_ARG);
777    
778        /* For THEN (and THEN_ARG) we pass back the address of the opcode, so that
779        the branch in which it occurs can be determined. Overload the start of
780        match pointer to do this. */
781    
782      case OP_THEN:      case OP_THEN:
783      RMATCH(eptr, ecode + _pcre_OP_lengths[*ecode], offset_top, md,      RMATCH(eptr, ecode + _pcre_OP_lengths[*ecode], offset_top, md,
784        ims, eptrb, flags, RM54);        eptrb, RM54);
785        if (rrc != MATCH_NOMATCH) RRETURN(rrc);
786        md->start_match_ptr = ecode;
787        MRRETURN(MATCH_THEN);
788    
789        case OP_THEN_ARG:
790        RMATCH(eptr, ecode + _pcre_OP_lengths[*ecode] + ecode[1], offset_top,
791          md, eptrb, RM58);
792      if (rrc != MATCH_NOMATCH) RRETURN(rrc);      if (rrc != MATCH_NOMATCH) RRETURN(rrc);
793        md->start_match_ptr = ecode;
794        md->mark = ecode + 2;
795      RRETURN(MATCH_THEN);      RRETURN(MATCH_THEN);
796    
797      /* Handle a capturing bracket. If there is space in the offset vector, save      /* Handle an atomic group that does not contain any capturing parentheses.
798      the current subject position in the working slot at the top of the vector.      This can be handled like an assertion. Prior to 8.13, all atomic groups
799      We mustn't change the current values of the data slot, because they may be      were handled this way. In 8.13, the code was changed as below for ONCE, so
800      set from a previous iteration of this group, and be referred to by a      that backups pass through the group and thereby reset captured values.
801      reference inside the group.      However, this uses a lot more stack, so in 8.20, atomic groups that do not
802        contain any captures generate OP_ONCE_NC, which can be handled in the old,
803      If the bracket fails to match, we need to restore this value and also the      less stack intensive way.
804      values of the final offsets, in case they were set by a previous iteration  
805      of the same bracket.      Check the alternative branches in turn - the matching won't pass the KET
806        for this kind of subpattern. If any one branch matches, we carry on as at
807        the end of a normal bracket, leaving the subject pointer, but resetting
808        the start-of-match value in case it was changed by \K. */
809    
810        case OP_ONCE_NC:
811        prev = ecode;
812        saved_eptr = eptr;
813        do
814          {
815          RMATCH(eptr, ecode + 1 + LINK_SIZE, offset_top, md, eptrb, RM64);
816          if (rrc == MATCH_MATCH)  /* Note: _not_ MATCH_ACCEPT */
817            {
818            mstart = md->start_match_ptr;
819            break;
820            }
821          if (rrc == MATCH_THEN)
822            {
823            next = ecode + GET(ecode,1);
824            if (md->start_match_ptr < next &&
825                (*ecode == OP_ALT || *next == OP_ALT))
826              rrc = MATCH_NOMATCH;
827            }
828    
829          if (rrc != MATCH_NOMATCH) RRETURN(rrc);
830          ecode += GET(ecode,1);
831          }
832        while (*ecode == OP_ALT);
833    
834        /* If hit the end of the group (which could be repeated), fail */
835    
836        if (*ecode != OP_ONCE_NC && *ecode != OP_ALT) RRETURN(MATCH_NOMATCH);
837    
838        /* Continue as from after the group, updating the offsets high water
839        mark, since extracts may have been taken. */
840    
841        do ecode += GET(ecode, 1); while (*ecode == OP_ALT);
842    
843        offset_top = md->end_offset_top;
844        eptr = md->end_match_ptr;
845    
846        /* For a non-repeating ket, just continue at this level. This also
847        happens for a repeating ket if no characters were matched in the group.
848        This is the forcible breaking of infinite loops as implemented in Perl
849        5.005. */
850    
851        if (*ecode == OP_KET || eptr == saved_eptr)
852          {
853          ecode += 1+LINK_SIZE;
854          break;
855          }
856    
857        /* The repeating kets try the rest of the pattern or restart from the
858        preceding bracket, in the appropriate order. The second "call" of match()
859        uses tail recursion, to avoid using another stack frame. */
860    
861        if (*ecode == OP_KETRMIN)
862          {
863          RMATCH(eptr, ecode + 1 + LINK_SIZE, offset_top, md, eptrb, RM65);
864          if (rrc != MATCH_NOMATCH) RRETURN(rrc);
865          ecode = prev;
866          goto TAIL_RECURSE;
867          }
868        else  /* OP_KETRMAX */
869          {
870          md->match_function_type = MATCH_CBEGROUP;
871          RMATCH(eptr, prev, offset_top, md, eptrb, RM66);
872          if (rrc != MATCH_NOMATCH) RRETURN(rrc);
873          ecode += 1 + LINK_SIZE;
874          goto TAIL_RECURSE;
875          }
876        /* Control never gets here */
877    
878        /* Handle a capturing bracket, other than those that are possessive with an
879        unlimited repeat. If there is space in the offset vector, save the current
880        subject position in the working slot at the top of the vector. We mustn't
881        change the current values of the data slot, because they may be set from a
882        previous iteration of this group, and be referred to by a reference inside
883        the group. A failure to match might occur after the group has succeeded,
884        if something later on doesn't match. For this reason, we need to restore
885        the working value and also the values of the final offsets, in case they
886        were set by a previous iteration of the same bracket.
887    
888      If there isn't enough space in the offset vector, treat this as if it were      If there isn't enough space in the offset vector, treat this as if it were
889      a non-capturing bracket. Don't worry about setting the flag for the error      a non-capturing bracket. Don't worry about setting the flag for the error
# Line 713  for (;;) Line 894  for (;;)
894      number = GET2(ecode, 1+LINK_SIZE);      number = GET2(ecode, 1+LINK_SIZE);
895      offset = number << 1;      offset = number << 1;
896    
897  #ifdef DEBUG  #ifdef PCRE_DEBUG
898      printf("start bracket %d\n", number);      printf("start bracket %d\n", number);
899      printf("subject=");      printf("subject=");
900      pchars(eptr, 16, TRUE, md);      pchars(eptr, 16, TRUE, md);
# Line 728  for (;;) Line 909  for (;;)
909        save_capture_last = md->capture_last;        save_capture_last = md->capture_last;
910    
911        DPRINTF(("saving %d %d %d\n", save_offset1, save_offset2, save_offset3));        DPRINTF(("saving %d %d %d\n", save_offset1, save_offset2, save_offset3));
912        md->offset_vector[md->offset_end - number] = eptr - md->start_subject;        md->offset_vector[md->offset_end - number] =
913            (int)(eptr - md->start_subject);
914    
915        flags = (op == OP_SCBRA)? match_cbegroup : 0;        for (;;)
       do  
916          {          {
917            if (op >= OP_SBRA) md->match_function_type = MATCH_CBEGROUP;
918          RMATCH(eptr, ecode + _pcre_OP_lengths[*ecode], offset_top, md,          RMATCH(eptr, ecode + _pcre_OP_lengths[*ecode], offset_top, md,
919            ims, eptrb, flags, RM1);            eptrb, RM1);
920          if (rrc != MATCH_NOMATCH && rrc != MATCH_THEN) RRETURN(rrc);          if (rrc == MATCH_ONCE) break;  /* Backing up through an atomic group */
921    
922            /* If we backed up to a THEN, check whether it is within the current
923            branch by comparing the address of the THEN that is passed back with
924            the end of the branch. If it is within the current branch, and the
925            branch is one of two or more alternatives (it either starts or ends
926            with OP_ALT), we have reached the limit of THEN's action, so convert
927            the return code to NOMATCH, which will cause normal backtracking to
928            happen from now on. Otherwise, THEN is passed back to an outer
929            alternative. This implements Perl's treatment of parenthesized groups,
930            where a group not containing | does not affect the current alternative,
931            that is, (X) is NOT the same as (X|(*F)). */
932    
933            if (rrc == MATCH_THEN)
934              {
935              next = ecode + GET(ecode,1);
936              if (md->start_match_ptr < next &&
937                  (*ecode == OP_ALT || *next == OP_ALT))
938                rrc = MATCH_NOMATCH;
939              }
940    
941            /* Anything other than NOMATCH is passed back. */
942    
943            if (rrc != MATCH_NOMATCH) RRETURN(rrc);
944          md->capture_last = save_capture_last;          md->capture_last = save_capture_last;
945          ecode += GET(ecode, 1);          ecode += GET(ecode, 1);
946            if (*ecode != OP_ALT) break;
947          }          }
       while (*ecode == OP_ALT);  
948    
949        DPRINTF(("bracket %d failed\n", number));        DPRINTF(("bracket %d failed\n", number));
   
950        md->offset_vector[offset] = save_offset1;        md->offset_vector[offset] = save_offset1;
951        md->offset_vector[offset+1] = save_offset2;        md->offset_vector[offset+1] = save_offset2;
952        md->offset_vector[md->offset_end - number] = save_offset3;        md->offset_vector[md->offset_end - number] = save_offset3;
953    
954        RRETURN(MATCH_NOMATCH);        /* At this point, rrc will be one of MATCH_ONCE or MATCH_NOMATCH. */
955    
956          if (md->mark == NULL) md->mark = markptr;
957          RRETURN(rrc);
958        }        }
959    
960      /* FALL THROUGH ... Insufficient room for saving captured contents. Treat      /* FALL THROUGH ... Insufficient room for saving captured contents. Treat
# Line 761  for (;;) Line 968  for (;;)
968      /* VVVVVVVVVVVVVVVVVVVVVVVVV */      /* VVVVVVVVVVVVVVVVVVVVVVVVV */
969      /* VVVVVVVVVVVVVVVVVVVVVVVVV */      /* VVVVVVVVVVVVVVVVVVVVVVVVV */
970    
971      /* Non-capturing bracket. Loop for all the alternatives. When we get to the      /* Non-capturing or atomic group, except for possessive with unlimited
972      final alternative within the brackets, we would return the result of a      repeat and ONCE group with no captures. Loop for all the alternatives.
     recursive call to match() whatever happened. We can reduce stack usage by  
     turning this into a tail recursion, except in the case when match_cbegroup  
     is set.*/  
973    
974        When we get to the final alternative within the brackets, we used to return
975        the result of a recursive call to match() whatever happened so it was
976        possible to reduce stack usage by turning this into a tail recursion,
977        except in the case of a possibly empty group. However, now that there is
978        the possiblity of (*THEN) occurring in the final alternative, this
979        optimization is no longer always possible.
980    
981        We can optimize if we know there are no (*THEN)s in the pattern; at present
982        this is the best that can be done.
983    
984        MATCH_ONCE is returned when the end of an atomic group is successfully
985        reached, but subsequent matching fails. It passes back up the tree (causing
986        captured values to be reset) until the original atomic group level is
987        reached. This is tested by comparing md->once_target with the start of the
988        group. At this point, the return is converted into MATCH_NOMATCH so that
989        previous backup points can be taken. */
990    
991        case OP_ONCE:
992      case OP_BRA:      case OP_BRA:
993      case OP_SBRA:      case OP_SBRA:
994      DPRINTF(("start non-capturing bracket\n"));      DPRINTF(("start non-capturing bracket\n"));
995      flags = (op >= OP_SBRA)? match_cbegroup : 0;  
996      for (;;)      for (;;)
997        {        {
998        if (ecode[GET(ecode, 1)] != OP_ALT)   /* Final alternative */        if (op >= OP_SBRA || op == OP_ONCE) md->match_function_type = MATCH_CBEGROUP;
999    
1000          /* If this is not a possibly empty group, and there are no (*THEN)s in
1001          the pattern, and this is the final alternative, optimize as described
1002          above. */
1003    
1004          else if (!md->hasthen && ecode[GET(ecode, 1)] != OP_ALT)
1005            {
1006            ecode += _pcre_OP_lengths[*ecode];
1007            goto TAIL_RECURSE;
1008            }
1009    
1010          /* In all other cases, we have to make another call to match(). */
1011    
1012          RMATCH(eptr, ecode + _pcre_OP_lengths[*ecode], offset_top, md, eptrb,
1013            RM2);
1014    
1015          /* See comment in the code for capturing groups above about handling
1016          THEN. */
1017    
1018          if (rrc == MATCH_THEN)
1019          {          {
1020          if (flags == 0)    /* Not a possibly empty group */          next = ecode + GET(ecode,1);
1021            if (md->start_match_ptr < next &&
1022                (*ecode == OP_ALT || *next == OP_ALT))
1023              rrc = MATCH_NOMATCH;
1024            }
1025    
1026          if (rrc != MATCH_NOMATCH)
1027            {
1028            if (rrc == MATCH_ONCE)
1029            {            {
1030            ecode += _pcre_OP_lengths[*ecode];            const uschar *scode = ecode;
1031            DPRINTF(("bracket 0 tail recursion\n"));            if (*scode != OP_ONCE)           /* If not at start, find it */
1032            goto TAIL_RECURSE;              {
1033                while (*scode == OP_ALT) scode += GET(scode, 1);
1034                scode -= GET(scode, 1);
1035                }
1036              if (md->once_target == scode) rrc = MATCH_NOMATCH;
1037            }            }
1038            RRETURN(rrc);
1039            }
1040          ecode += GET(ecode, 1);
1041          if (*ecode != OP_ALT) break;
1042          }
1043    
1044        if (md->mark == NULL) md->mark = markptr;
1045        RRETURN(MATCH_NOMATCH);
1046    
1047          /* Possibly empty group; can't use tail recursion. */      /* Handle possessive capturing brackets with an unlimited repeat. We come
1048        here from BRAZERO with allow_zero set TRUE. The offset_vector values are
1049        handled similarly to the normal case above. However, the matching is
1050        different. The end of these brackets will always be OP_KETRPOS, which
1051        returns MATCH_KETRPOS without going further in the pattern. By this means
1052        we can handle the group by iteration rather than recursion, thereby
1053        reducing the amount of stack needed. */
1054    
1055        case OP_CBRAPOS:
1056        case OP_SCBRAPOS:
1057        allow_zero = FALSE;
1058    
1059          RMATCH(eptr, ecode + _pcre_OP_lengths[*ecode], offset_top, md, ims,      POSSESSIVE_CAPTURE:
1060            eptrb, flags, RM48);      number = GET2(ecode, 1+LINK_SIZE);
1061          RRETURN(rrc);      offset = number << 1;
1062    
1063    #ifdef PCRE_DEBUG
1064        printf("start possessive bracket %d\n", number);
1065        printf("subject=");
1066        pchars(eptr, 16, TRUE, md);
1067        printf("\n");
1068    #endif
1069    
1070        if (offset < md->offset_max)
1071          {
1072          matched_once = FALSE;
1073          code_offset = ecode - md->start_code;
1074    
1075          save_offset1 = md->offset_vector[offset];
1076          save_offset2 = md->offset_vector[offset+1];
1077          save_offset3 = md->offset_vector[md->offset_end - number];
1078          save_capture_last = md->capture_last;
1079    
1080          DPRINTF(("saving %d %d %d\n", save_offset1, save_offset2, save_offset3));
1081    
1082          /* Each time round the loop, save the current subject position for use
1083          when the group matches. For MATCH_MATCH, the group has matched, so we
1084          restart it with a new subject starting position, remembering that we had
1085          at least one match. For MATCH_NOMATCH, carry on with the alternatives, as
1086          usual. If we haven't matched any alternatives in any iteration, check to
1087          see if a previous iteration matched. If so, the group has matched;
1088          continue from afterwards. Otherwise it has failed; restore the previous
1089          capture values before returning NOMATCH. */
1090    
1091          for (;;)
1092            {
1093            md->offset_vector[md->offset_end - number] =
1094              (int)(eptr - md->start_subject);
1095            if (op >= OP_SBRA) md->match_function_type = MATCH_CBEGROUP;
1096            RMATCH(eptr, ecode + _pcre_OP_lengths[*ecode], offset_top, md,
1097              eptrb, RM63);
1098            if (rrc == MATCH_KETRPOS)
1099              {
1100              offset_top = md->end_offset_top;
1101              eptr = md->end_match_ptr;
1102              ecode = md->start_code + code_offset;
1103              save_capture_last = md->capture_last;
1104              matched_once = TRUE;
1105              continue;
1106              }
1107    
1108            /* See comment in the code for capturing groups above about handling
1109            THEN. */
1110    
1111            if (rrc == MATCH_THEN)
1112              {
1113              next = ecode + GET(ecode,1);
1114              if (md->start_match_ptr < next &&
1115                  (*ecode == OP_ALT || *next == OP_ALT))
1116                rrc = MATCH_NOMATCH;
1117              }
1118    
1119            if (rrc != MATCH_NOMATCH) RRETURN(rrc);
1120            md->capture_last = save_capture_last;
1121            ecode += GET(ecode, 1);
1122            if (*ecode != OP_ALT) break;
1123          }          }
1124    
1125        /* For non-final alternatives, continue the loop for a NOMATCH result;        if (!matched_once)
1126        otherwise return. */          {
1127            md->offset_vector[offset] = save_offset1;
1128            md->offset_vector[offset+1] = save_offset2;
1129            md->offset_vector[md->offset_end - number] = save_offset3;
1130            }
1131    
1132        RMATCH(eptr, ecode + _pcre_OP_lengths[*ecode], offset_top, md, ims,        if (md->mark == NULL) md->mark = markptr;
1133          eptrb, flags, RM2);        if (allow_zero || matched_once)
1134        if (rrc != MATCH_NOMATCH && rrc != MATCH_THEN) RRETURN(rrc);          {
1135            ecode += 1 + LINK_SIZE;
1136            break;
1137            }
1138    
1139          RRETURN(MATCH_NOMATCH);
1140          }
1141    
1142        /* FALL THROUGH ... Insufficient room for saving captured contents. Treat
1143        as a non-capturing bracket. */
1144    
1145        /* VVVVVVVVVVVVVVVVVVVVVVVVV */
1146        /* VVVVVVVVVVVVVVVVVVVVVVVVV */
1147    
1148        DPRINTF(("insufficient capture room: treat as non-capturing\n"));
1149    
1150        /* VVVVVVVVVVVVVVVVVVVVVVVVV */
1151        /* VVVVVVVVVVVVVVVVVVVVVVVVV */
1152    
1153        /* Non-capturing possessive bracket with unlimited repeat. We come here
1154        from BRAZERO with allow_zero = TRUE. The code is similar to the above,
1155        without the capturing complication. It is written out separately for speed
1156        and cleanliness. */
1157    
1158        case OP_BRAPOS:
1159        case OP_SBRAPOS:
1160        allow_zero = FALSE;
1161    
1162        POSSESSIVE_NON_CAPTURE:
1163        matched_once = FALSE;
1164        code_offset = ecode - md->start_code;
1165    
1166        for (;;)
1167          {
1168          if (op >= OP_SBRA) md->match_function_type = MATCH_CBEGROUP;
1169          RMATCH(eptr, ecode + _pcre_OP_lengths[*ecode], offset_top, md,
1170            eptrb, RM48);
1171          if (rrc == MATCH_KETRPOS)
1172            {
1173            offset_top = md->end_offset_top;
1174            eptr = md->end_match_ptr;
1175            ecode = md->start_code + code_offset;
1176            matched_once = TRUE;
1177            continue;
1178            }
1179    
1180          /* See comment in the code for capturing groups above about handling
1181          THEN. */
1182    
1183          if (rrc == MATCH_THEN)
1184            {
1185            next = ecode + GET(ecode,1);
1186            if (md->start_match_ptr < next &&
1187                (*ecode == OP_ALT || *next == OP_ALT))
1188              rrc = MATCH_NOMATCH;
1189            }
1190    
1191          if (rrc != MATCH_NOMATCH) RRETURN(rrc);
1192        ecode += GET(ecode, 1);        ecode += GET(ecode, 1);
1193          if (*ecode != OP_ALT) break;
1194          }
1195    
1196        if (matched_once || allow_zero)
1197          {
1198          ecode += 1 + LINK_SIZE;
1199          break;
1200        }        }
1201        RRETURN(MATCH_NOMATCH);
1202    
1203      /* Control never reaches here. */      /* Control never reaches here. */
1204    
1205      /* Conditional group: compilation checked that there are no more than      /* Conditional group: compilation checked that there are no more than
1206      two branches. If the condition is false, skipping the first branch takes us      two branches. If the condition is false, skipping the first branch takes us
1207      past the end if there is only one branch, but that's OK because that is      past the end if there is only one branch, but that's OK because that is
1208      exactly what going to the ket would do. As there is only one branch to be      exactly what going to the ket would do. */
     obeyed, we can use tail recursion to avoid using another stack frame. */  
1209    
1210      case OP_COND:      case OP_COND:
1211      case OP_SCOND:      case OP_SCOND:
1212      codelink= GET(ecode, 1);      codelink = GET(ecode, 1);
1213    
1214      /* Because of the way auto-callout works during compile, a callout item is      /* Because of the way auto-callout works during compile, a callout item is
1215      inserted between OP_COND and an assertion condition. */      inserted between OP_COND and an assertion condition. */
# Line 817  for (;;) Line 1219  for (;;)
1219        if (pcre_callout != NULL)        if (pcre_callout != NULL)
1220          {          {
1221          pcre_callout_block cb;          pcre_callout_block cb;
1222          cb.version          = 1;   /* Version 1 of the callout block */          cb.version          = 2;   /* Version 1 of the callout block */
1223          cb.callout_number   = ecode[LINK_SIZE+2];          cb.callout_number   = ecode[LINK_SIZE+2];
1224          cb.offset_vector    = md->offset_vector;          cb.offset_vector    = md->offset_vector;
1225          cb.subject          = (PCRE_SPTR)md->start_subject;          cb.subject          = (PCRE_SPTR)md->start_subject;
1226          cb.subject_length   = md->end_subject - md->start_subject;          cb.subject_length   = (int)(md->end_subject - md->start_subject);
1227          cb.start_match      = mstart - md->start_subject;          cb.start_match      = (int)(mstart - md->start_subject);
1228          cb.current_position = eptr - md->start_subject;          cb.current_position = (int)(eptr - md->start_subject);
1229          cb.pattern_position = GET(ecode, LINK_SIZE + 3);          cb.pattern_position = GET(ecode, LINK_SIZE + 3);
1230          cb.next_item_length = GET(ecode, 3 + 2*LINK_SIZE);          cb.next_item_length = GET(ecode, 3 + 2*LINK_SIZE);
1231          cb.capture_top      = offset_top/2;          cb.capture_top      = offset_top/2;
1232          cb.capture_last     = md->capture_last;          cb.capture_last     = md->capture_last;
1233          cb.callout_data     = md->callout_data;          cb.callout_data     = md->callout_data;
1234          if ((rrc = (*pcre_callout)(&cb)) > 0) RRETURN(MATCH_NOMATCH);          cb.mark             = markptr;
1235            if ((rrc = (*pcre_callout)(&cb)) > 0) MRRETURN(MATCH_NOMATCH);
1236          if (rrc < 0) RRETURN(rrc);          if (rrc < 0) RRETURN(rrc);
1237          }          }
1238        ecode += _pcre_OP_lengths[OP_CALLOUT];        ecode += _pcre_OP_lengths[OP_CALLOUT];
# Line 839  for (;;) Line 1242  for (;;)
1242    
1243      /* Now see what the actual condition is */      /* Now see what the actual condition is */
1244    
1245      if (condcode == OP_RREF)         /* Recursion test */      if (condcode == OP_RREF || condcode == OP_NRREF)    /* Recursion test */
1246        {        {
1247        offset = GET2(ecode, LINK_SIZE + 2);     /* Recursion group number*/        if (md->recursive == NULL)                /* Not recursing => FALSE */
1248        condition = md->recursive != NULL &&          {
1249          (offset == RREF_ANY || offset == md->recursive->group_num);          condition = FALSE;
1250        ecode += condition? 3 : GET(ecode, 1);          ecode += GET(ecode, 1);
1251            }
1252          else
1253            {
1254            int recno = GET2(ecode, LINK_SIZE + 2);   /* Recursion group number*/
1255            condition =  (recno == RREF_ANY || recno == md->recursive->group_num);
1256    
1257            /* If the test is for recursion into a specific subpattern, and it is
1258            false, but the test was set up by name, scan the table to see if the
1259            name refers to any other numbers, and test them. The condition is true
1260            if any one is set. */
1261    
1262            if (!condition && condcode == OP_NRREF && recno != RREF_ANY)
1263              {
1264              uschar *slotA = md->name_table;
1265              for (i = 0; i < md->name_count; i++)
1266                {
1267                if (GET2(slotA, 0) == recno) break;
1268                slotA += md->name_entry_size;
1269                }
1270    
1271              /* Found a name for the number - there can be only one; duplicate
1272              names for different numbers are allowed, but not vice versa. First
1273              scan down for duplicates. */
1274    
1275              if (i < md->name_count)
1276                {
1277                uschar *slotB = slotA;
1278                while (slotB > md->name_table)
1279                  {
1280                  slotB -= md->name_entry_size;
1281                  if (strcmp((char *)slotA + 2, (char *)slotB + 2) == 0)
1282                    {
1283                    condition = GET2(slotB, 0) == md->recursive->group_num;
1284                    if (condition) break;
1285                    }
1286                  else break;
1287                  }
1288    
1289                /* Scan up for duplicates */
1290    
1291                if (!condition)
1292                  {
1293                  slotB = slotA;
1294                  for (i++; i < md->name_count; i++)
1295                    {
1296                    slotB += md->name_entry_size;
1297                    if (strcmp((char *)slotA + 2, (char *)slotB + 2) == 0)
1298                      {
1299                      condition = GET2(slotB, 0) == md->recursive->group_num;
1300                      if (condition) break;
1301                      }
1302                    else break;
1303                    }
1304                  }
1305                }
1306              }
1307    
1308            /* Chose branch according to the condition */
1309    
1310            ecode += condition? 3 : GET(ecode, 1);
1311            }
1312        }        }
1313    
1314      else if (condcode == OP_CREF)    /* Group used test */      else if (condcode == OP_CREF || condcode == OP_NCREF)  /* Group used test */
1315        {        {
1316        offset = GET2(ecode, LINK_SIZE+2) << 1;  /* Doubled ref number */        offset = GET2(ecode, LINK_SIZE+2) << 1;  /* Doubled ref number */
1317        condition = offset < offset_top && md->offset_vector[offset] >= 0;        condition = offset < offset_top && md->offset_vector[offset] >= 0;
1318    
1319          /* If the numbered capture is unset, but the reference was by name,
1320          scan the table to see if the name refers to any other numbers, and test
1321          them. The condition is true if any one is set. This is tediously similar
1322          to the code above, but not close enough to try to amalgamate. */
1323    
1324          if (!condition && condcode == OP_NCREF)
1325            {
1326            int refno = offset >> 1;
1327            uschar *slotA = md->name_table;
1328    
1329            for (i = 0; i < md->name_count; i++)
1330              {
1331              if (GET2(slotA, 0) == refno) break;
1332              slotA += md->name_entry_size;
1333              }
1334    
1335            /* Found a name for the number - there can be only one; duplicate names
1336            for different numbers are allowed, but not vice versa. First scan down
1337            for duplicates. */
1338    
1339            if (i < md->name_count)
1340              {
1341              uschar *slotB = slotA;
1342              while (slotB > md->name_table)
1343                {
1344                slotB -= md->name_entry_size;
1345                if (strcmp((char *)slotA + 2, (char *)slotB + 2) == 0)
1346                  {
1347                  offset = GET2(slotB, 0) << 1;
1348                  condition = offset < offset_top &&
1349                    md->offset_vector[offset] >= 0;
1350                  if (condition) break;
1351                  }
1352                else break;
1353                }
1354    
1355              /* Scan up for duplicates */
1356    
1357              if (!condition)
1358                {
1359                slotB = slotA;
1360                for (i++; i < md->name_count; i++)
1361                  {
1362                  slotB += md->name_entry_size;
1363                  if (strcmp((char *)slotA + 2, (char *)slotB + 2) == 0)
1364                    {
1365                    offset = GET2(slotB, 0) << 1;
1366                    condition = offset < offset_top &&
1367                      md->offset_vector[offset] >= 0;
1368                    if (condition) break;
1369                    }
1370                  else break;
1371                  }
1372                }
1373              }
1374            }
1375    
1376          /* Chose branch according to the condition */
1377    
1378        ecode += condition? 3 : GET(ecode, 1);        ecode += condition? 3 : GET(ecode, 1);
1379        }        }
1380    
# Line 861  for (;;) Line 1385  for (;;)
1385        }        }
1386    
1387      /* The condition is an assertion. Call match() to evaluate it - setting      /* The condition is an assertion. Call match() to evaluate it - setting
1388      the final argument match_condassert causes it to stop at the end of an      md->match_function_type to MATCH_CONDASSERT causes it to stop at the end of
1389      assertion. */      an assertion. */
1390    
1391      else      else
1392        {        {
1393        RMATCH(eptr, ecode + 1 + LINK_SIZE, offset_top, md, ims, NULL,        md->match_function_type = MATCH_CONDASSERT;
1394            match_condassert, RM3);        RMATCH(eptr, ecode + 1 + LINK_SIZE, offset_top, md, NULL, RM3);
1395        if (rrc == MATCH_MATCH)        if (rrc == MATCH_MATCH)
1396          {          {
1397            if (md->end_offset_top > offset_top)
1398              offset_top = md->end_offset_top;  /* Captures may have happened */
1399          condition = TRUE;          condition = TRUE;
1400          ecode += 1 + LINK_SIZE + GET(ecode, LINK_SIZE + 2);          ecode += 1 + LINK_SIZE + GET(ecode, LINK_SIZE + 2);
1401          while (*ecode == OP_ALT) ecode += GET(ecode, 1);          while (*ecode == OP_ALT) ecode += GET(ecode, 1);
1402          }          }
1403    
1404          /* PCRE doesn't allow the effect of (*THEN) to escape beyond an
1405          assertion; it is therefore treated as NOMATCH. */
1406    
1407        else if (rrc != MATCH_NOMATCH && rrc != MATCH_THEN)        else if (rrc != MATCH_NOMATCH && rrc != MATCH_THEN)
1408          {          {
1409          RRETURN(rrc);         /* Need braces because of following else */          RRETURN(rrc);         /* Need braces because of following else */
# Line 885  for (;;) Line 1415  for (;;)
1415          }          }
1416        }        }
1417    
1418      /* We are now at the branch that is to be obeyed. As there is only one,      /* We are now at the branch that is to be obeyed. As there is only one, can
1419      we can use tail recursion to avoid using another stack frame, except when      use tail recursion to avoid using another stack frame, except when there is
1420      match_cbegroup is required for an unlimited repeat of a possibly empty      unlimited repeat of a possibly empty group. In the latter case, a recursive
1421      group. If the second alternative doesn't exist, we can just plough on. */      call to match() is always required, unless the second alternative doesn't
1422        exist, in which case we can just plough on. Note that, for compatibility
1423        with Perl, the | in a conditional group is NOT treated as creating two
1424        alternatives. If a THEN is encountered in the branch, it propagates out to
1425        the enclosing alternative (unless nested in a deeper set of alternatives,
1426        of course). */
1427    
1428      if (condition || *ecode == OP_ALT)      if (condition || *ecode == OP_ALT)
1429        {        {
1430        ecode += 1 + LINK_SIZE;        if (op != OP_SCOND)
       if (op == OP_SCOND)        /* Possibly empty group */  
         {  
         RMATCH(eptr, ecode, offset_top, md, ims, eptrb, match_cbegroup, RM49);  
         RRETURN(rrc);  
         }  
       else                       /* Group must match something */  
1431          {          {
1432          flags = 0;          ecode += 1 + LINK_SIZE;
1433          goto TAIL_RECURSE;          goto TAIL_RECURSE;
1434          }          }
1435    
1436          md->match_function_type = MATCH_CBEGROUP;
1437          RMATCH(eptr, ecode + 1 + LINK_SIZE, offset_top, md, eptrb, RM49);
1438          RRETURN(rrc);
1439        }        }
1440      else                         /* Condition false & no alternative */  
1441         /* Condition false & no alternative; continue after the group. */
1442    
1443        else
1444        {        {
1445        ecode += 1 + LINK_SIZE;        ecode += 1 + LINK_SIZE;
1446        }        }
1447      break;      break;
1448    
1449    
1450      /* Before OP_ACCEPT there may be any number of OP_CLOSE opcodes,      /* Before OP_ACCEPT there may be any number of OP_CLOSE opcodes,
1451      to close any currently open capturing brackets. */      to close any currently open capturing brackets. */
1452    
1453      case OP_CLOSE:      case OP_CLOSE:
1454      number = GET2(ecode, 1);      number = GET2(ecode, 1);
1455      offset = number << 1;      offset = number << 1;
1456    
1457  #ifdef DEBUG  #ifdef PCRE_DEBUG
1458        printf("end bracket %d at *ACCEPT", number);        printf("end bracket %d at *ACCEPT", number);
1459        printf("\n");        printf("\n");
1460  #endif  #endif
# Line 928  for (;;) Line 1464  for (;;)
1464        {        {
1465        md->offset_vector[offset] =        md->offset_vector[offset] =
1466          md->offset_vector[md->offset_end - number];          md->offset_vector[md->offset_end - number];
1467        md->offset_vector[offset+1] = eptr - md->start_subject;        md->offset_vector[offset+1] = (int)(eptr - md->start_subject);
1468        if (offset_top <= offset) offset_top = offset + 2;        if (offset_top <= offset) offset_top = offset + 2;
1469        }        }
1470      ecode += 3;      ecode += 3;
1471      break;      break;
1472    
1473    
1474      /* End of the pattern, either real or forced. If we are in a top-level      /* End of the pattern, either real or forced. */
     recursion, we should restore the offsets appropriately and continue from  
     after the call. */  
1475    
     case OP_ACCEPT:  
1476      case OP_END:      case OP_END:
1477      if (md->recursive != NULL && md->recursive->group_num == 0)      case OP_ACCEPT:
1478        {      case OP_ASSERT_ACCEPT:
       recursion_info *rec = md->recursive;  
       DPRINTF(("End of pattern in a (?0) recursion\n"));  
       md->recursive = rec->prevrec;  
       memmove(md->offset_vector, rec->offset_save,  
         rec->saved_max * sizeof(int));  
       offset_top = rec->offset_top;  
       mstart = rec->save_start;  
       ims = original_ims;  
       ecode = rec->after_call;  
       break;  
       }  
1479    
1480      /* Otherwise, if we have matched an empty string, fail if PCRE_NOTEMPTY is      /* If we have matched an empty string, fail if not in an assertion and not
1481      set, or if PCRE_NOTEMPTY_ATSTART is set and we have matched at the start of      in a recursion if either PCRE_NOTEMPTY is set, or if PCRE_NOTEMPTY_ATSTART
1482      the subject. In both cases, backtracking will then try other alternatives,      is set and we have matched at the start of the subject. In both cases,
1483      if any. */      backtracking will then try other alternatives, if any. */
1484    
1485      if (eptr == mstart &&      if (eptr == mstart && op != OP_ASSERT_ACCEPT &&
1486          (md->notempty ||           md->recursive == NULL &&
1487            (md->notempty_atstart &&           (md->notempty ||
1488              mstart == md->start_subject + md->start_offset)))             (md->notempty_atstart &&
1489        RRETURN(MATCH_NOMATCH);               mstart == md->start_subject + md->start_offset)))
1490          MRRETURN(MATCH_NOMATCH);
1491    
1492      /* Otherwise, we have a match. */      /* Otherwise, we have a match. */
1493    
1494      md->end_match_ptr = eptr;           /* Record where we ended */      md->end_match_ptr = eptr;           /* Record where we ended */
1495      md->end_offset_top = offset_top;    /* and how many extracts were taken */      md->end_offset_top = offset_top;    /* and how many extracts were taken */
1496      md->start_match_ptr = mstart;       /* and the start (\K can modify) */      md->start_match_ptr = mstart;       /* and the start (\K can modify) */
     RRETURN(MATCH_MATCH);  
1497    
1498      /* Change option settings */      /* For some reason, the macros don't work properly if an expression is
1499        given as the argument to MRRETURN when the heap is in use. */
1500    
1501      case OP_OPT:      rrc = (op == OP_END)? MATCH_MATCH : MATCH_ACCEPT;
1502      ims = ecode[1];      MRRETURN(rrc);
     ecode += 2;  
     DPRINTF(("ims set to %02lx\n", ims));  
     break;  
1503    
1504      /* Assertion brackets. Check the alternative branches in turn - the      /* Assertion brackets. Check the alternative branches in turn - the
1505      matching won't pass the KET for an assertion. If any one branch matches,      matching won't pass the KET for an assertion. If any one branch matches,
1506      the assertion is true. Lookbehind assertions have an OP_REVERSE item at the      the assertion is true. Lookbehind assertions have an OP_REVERSE item at the
1507      start of each branch to move the current point backwards, so the code at      start of each branch to move the current point backwards, so the code at
1508      this level is identical to the lookahead case. */      this level is identical to the lookahead case. When the assertion is part
1509        of a condition, we want to return immediately afterwards. The caller of
1510        this incarnation of the match() function will have set MATCH_CONDASSERT in
1511        md->match_function type, and one of these opcodes will be the first opcode
1512        that is processed. We use a local variable that is preserved over calls to
1513        match() to remember this case. */
1514    
1515      case OP_ASSERT:      case OP_ASSERT:
1516      case OP_ASSERTBACK:      case OP_ASSERTBACK:
1517        if (md->match_function_type == MATCH_CONDASSERT)
1518          {
1519          condassert = TRUE;
1520          md->match_function_type = 0;
1521          }
1522        else condassert = FALSE;
1523    
1524      do      do
1525        {        {
1526        RMATCH(eptr, ecode + 1 + LINK_SIZE, offset_top, md, ims, NULL, 0,        RMATCH(eptr, ecode + 1 + LINK_SIZE, offset_top, md, NULL, RM4);
1527          RM4);        if (rrc == MATCH_MATCH || rrc == MATCH_ACCEPT)
1528        if (rrc == MATCH_MATCH) break;          {
1529            mstart = md->start_match_ptr;   /* In case \K reset it */
1530            markptr = md->mark;
1531            break;
1532            }
1533    
1534          /* PCRE does not allow THEN to escape beyond an assertion; it is treated
1535          as NOMATCH. */
1536    
1537        if (rrc != MATCH_NOMATCH && rrc != MATCH_THEN) RRETURN(rrc);        if (rrc != MATCH_NOMATCH && rrc != MATCH_THEN) RRETURN(rrc);
1538        ecode += GET(ecode, 1);        ecode += GET(ecode, 1);
1539        }        }
1540      while (*ecode == OP_ALT);      while (*ecode == OP_ALT);
1541      if (*ecode == OP_KET) RRETURN(MATCH_NOMATCH);  
1542        if (*ecode == OP_KET) MRRETURN(MATCH_NOMATCH);
1543    
1544      /* If checking an assertion for a condition, return MATCH_MATCH. */      /* If checking an assertion for a condition, return MATCH_MATCH. */
1545    
1546      if ((flags & match_condassert) != 0) RRETURN(MATCH_MATCH);      if (condassert) RRETURN(MATCH_MATCH);
1547    
1548      /* Continue from after the assertion, updating the offsets high water      /* Continue from after the assertion, updating the offsets high water
1549      mark, since extracts may have been taken during the assertion. */      mark, since extracts may have been taken during the assertion. */
# Line 1012  for (;;) Line 1553  for (;;)
1553      offset_top = md->end_offset_top;      offset_top = md->end_offset_top;
1554      continue;      continue;
1555    
1556      /* Negative assertion: all branches must fail to match */      /* Negative assertion: all branches must fail to match. Encountering SKIP,
1557        PRUNE, or COMMIT means we must assume failure without checking subsequent
1558        branches. */
1559    
1560      case OP_ASSERT_NOT:      case OP_ASSERT_NOT:
1561      case OP_ASSERTBACK_NOT:      case OP_ASSERTBACK_NOT:
1562        if (md->match_function_type == MATCH_CONDASSERT)
1563          {
1564          condassert = TRUE;
1565          md->match_function_type = 0;
1566          }
1567        else condassert = FALSE;
1568    
1569      do      do
1570        {        {
1571        RMATCH(eptr, ecode + 1 + LINK_SIZE, offset_top, md, ims, NULL, 0,        RMATCH(eptr, ecode + 1 + LINK_SIZE, offset_top, md, NULL, RM5);
1572          RM5);        if (rrc == MATCH_MATCH || rrc == MATCH_ACCEPT) MRRETURN(MATCH_NOMATCH);
1573        if (rrc == MATCH_MATCH) RRETURN(MATCH_NOMATCH);        if (rrc == MATCH_SKIP || rrc == MATCH_PRUNE || rrc == MATCH_COMMIT)
1574            {
1575            do ecode += GET(ecode,1); while (*ecode == OP_ALT);
1576            break;
1577            }
1578    
1579          /* PCRE does not allow THEN to escape beyond an assertion; it is treated
1580          as NOMATCH. */
1581    
1582        if (rrc != MATCH_NOMATCH && rrc != MATCH_THEN) RRETURN(rrc);        if (rrc != MATCH_NOMATCH && rrc != MATCH_THEN) RRETURN(rrc);
1583        ecode += GET(ecode,1);        ecode += GET(ecode,1);
1584        }        }
1585      while (*ecode == OP_ALT);      while (*ecode == OP_ALT);
1586    
1587      if ((flags & match_condassert) != 0) RRETURN(MATCH_MATCH);      if (condassert) RRETURN(MATCH_MATCH);  /* Condition assertion */
1588    
1589      ecode += 1 + LINK_SIZE;      ecode += 1 + LINK_SIZE;
1590      continue;      continue;
# Line 1044  for (;;) Line 1602  for (;;)
1602        while (i-- > 0)        while (i-- > 0)
1603          {          {
1604          eptr--;          eptr--;
1605          if (eptr < md->start_subject) RRETURN(MATCH_NOMATCH);          if (eptr < md->start_subject) MRRETURN(MATCH_NOMATCH);
1606          BACKCHAR(eptr);          BACKCHAR(eptr);
1607          }          }
1608        }        }
# Line 1055  for (;;) Line 1613  for (;;)
1613    
1614        {        {
1615        eptr -= GET(ecode, 1);        eptr -= GET(ecode, 1);
1616        if (eptr < md->start_subject) RRETURN(MATCH_NOMATCH);        if (eptr < md->start_subject) MRRETURN(MATCH_NOMATCH);
1617        }        }
1618    
1619      /* Save the earliest consulted character, then skip to next op code */      /* Save the earliest consulted character, then skip to next op code */
# Line 1072  for (;;) Line 1630  for (;;)
1630      if (pcre_callout != NULL)      if (pcre_callout != NULL)
1631        {        {
1632        pcre_callout_block cb;        pcre_callout_block cb;
1633        cb.version          = 1;   /* Version 1 of the callout block */        cb.version          = 2;   /* Version 1 of the callout block */
1634        cb.callout_number   = ecode[1];        cb.callout_number   = ecode[1];
1635        cb.offset_vector    = md->offset_vector;        cb.offset_vector    = md->offset_vector;
1636        cb.subject          = (PCRE_SPTR)md->start_subject;        cb.subject          = (PCRE_SPTR)md->start_subject;
1637        cb.subject_length   = md->end_subject - md->start_subject;        cb.subject_length   = (int)(md->end_subject - md->start_subject);
1638        cb.start_match      = mstart - md->start_subject;        cb.start_match      = (int)(mstart - md->start_subject);
1639        cb.current_position = eptr - md->start_subject;        cb.current_position = (int)(eptr - md->start_subject);
1640        cb.pattern_position = GET(ecode, 2);        cb.pattern_position = GET(ecode, 2);
1641        cb.next_item_length = GET(ecode, 2 + LINK_SIZE);        cb.next_item_length = GET(ecode, 2 + LINK_SIZE);
1642        cb.capture_top      = offset_top/2;        cb.capture_top      = offset_top/2;
1643        cb.capture_last     = md->capture_last;        cb.capture_last     = md->capture_last;
1644        cb.callout_data     = md->callout_data;        cb.callout_data     = md->callout_data;
1645        if ((rrc = (*pcre_callout)(&cb)) > 0) RRETURN(MATCH_NOMATCH);        cb.mark             = markptr;
1646          if ((rrc = (*pcre_callout)(&cb)) > 0) MRRETURN(MATCH_NOMATCH);
1647        if (rrc < 0) RRETURN(rrc);        if (rrc < 0) RRETURN(rrc);
1648        }        }
1649      ecode += 2 + 2*LINK_SIZE;      ecode += 2 + 2*LINK_SIZE;
# Line 1094  for (;;) Line 1653  for (;;)
1653      offset data is the offset to the starting bracket from the start of the      offset data is the offset to the starting bracket from the start of the
1654      whole pattern. (This is so that it works from duplicated subpatterns.)      whole pattern. (This is so that it works from duplicated subpatterns.)
1655    
1656      If there are any capturing brackets started but not finished, we have to      The state of the capturing groups is preserved over recursion, and
1657      save their starting points and reinstate them after the recursion. However,      re-instated afterwards. We don't know how many are started and not yet
1658      we don't know how many such there are (offset_top records the completed      finished (offset_top records the completed total) so we just have to save
1659      total) so we just have to save all the potential data. There may be up to      all the potential data. There may be up to 65535 such values, which is too
1660      65535 such values, which is too large to put on the stack, but using malloc      large to put on the stack, but using malloc for small numbers seems
1661      for small numbers seems expensive. As a compromise, the stack is used when      expensive. As a compromise, the stack is used when there are no more than
1662      there are no more than REC_STACK_SAVE_MAX values to store; otherwise malloc      REC_STACK_SAVE_MAX values to store; otherwise malloc is used.
     is used. A problem is what to do if the malloc fails ... there is no way of  
     returning to the top level with an error. Save the top REC_STACK_SAVE_MAX  
     values on the stack, and accept that the rest may be wrong.  
1663    
1664      There are also other values that have to be saved. We use a chained      There are also other values that have to be saved. We use a chained
1665      sequence of blocks that actually live on the stack. Thanks to Robin Houston      sequence of blocks that actually live on the stack. Thanks to Robin Houston
1666      for the original version of this logic. */      for the original version of this logic. It has, however, been hacked around
1667        a lot, so he is not to blame for the current way it works. */
1668    
1669      case OP_RECURSE:      case OP_RECURSE:
1670        {        {
1671          recursion_info *ri;
1672          int recno;
1673    
1674        callpat = md->start_code + GET(ecode, 1);        callpat = md->start_code + GET(ecode, 1);
1675        new_recursive.group_num = (callpat == md->start_code)? 0 :        recno = (callpat == md->start_code)? 0 :
1676          GET2(callpat, 1 + LINK_SIZE);          GET2(callpat, 1 + LINK_SIZE);
1677    
1678          /* Check for repeating a recursion without advancing the subject pointer.
1679          This should catch convoluted mutual recursions. (Some simple cases are
1680          caught at compile time.) */
1681    
1682          for (ri = md->recursive; ri != NULL; ri = ri->prevrec)
1683            if (recno == ri->group_num && eptr == ri->subject_position)
1684              RRETURN(PCRE_ERROR_RECURSELOOP);
1685    
1686        /* Add to "recursing stack" */        /* Add to "recursing stack" */
1687    
1688          new_recursive.group_num = recno;
1689          new_recursive.subject_position = eptr;
1690        new_recursive.prevrec = md->recursive;        new_recursive.prevrec = md->recursive;
1691        md->recursive = &new_recursive;        md->recursive = &new_recursive;
1692    
1693        /* Find where to continue from afterwards */        /* Where to continue from afterwards */
1694    
1695        ecode += 1 + LINK_SIZE;        ecode += 1 + LINK_SIZE;
       new_recursive.after_call = ecode;  
1696    
1697        /* Now save the offset data. */        /* Now save the offset data */
1698    
1699        new_recursive.saved_max = md->offset_end;        new_recursive.saved_max = md->offset_end;
1700        if (new_recursive.saved_max <= REC_STACK_SAVE_MAX)        if (new_recursive.saved_max <= REC_STACK_SAVE_MAX)
# Line 1136  for (;;) Line 1705  for (;;)
1705            (int *)(pcre_malloc)(new_recursive.saved_max * sizeof(int));            (int *)(pcre_malloc)(new_recursive.saved_max * sizeof(int));
1706          if (new_recursive.offset_save == NULL) RRETURN(PCRE_ERROR_NOMEMORY);          if (new_recursive.offset_save == NULL) RRETURN(PCRE_ERROR_NOMEMORY);
1707          }          }
   
1708        memcpy(new_recursive.offset_save, md->offset_vector,        memcpy(new_recursive.offset_save, md->offset_vector,
1709              new_recursive.saved_max * sizeof(int));              new_recursive.saved_max * sizeof(int));
       new_recursive.save_start = mstart;  
       new_recursive.offset_top = offset_top;  
       mstart = eptr;  
1710    
1711        /* OK, now we can do the recursion. For each top-level alternative we        /* OK, now we can do the recursion. After processing each alternative,
1712        restore the offset and recursion data. */        restore the offset data. If there were nested recursions, md->recursive
1713          might be changed, so reset it before looping. */
1714    
1715        DPRINTF(("Recursing into group %d\n", new_recursive.group_num));        DPRINTF(("Recursing into group %d\n", new_recursive.group_num));
1716        flags = (*callpat >= OP_SBRA)? match_cbegroup : 0;        cbegroup = (*callpat >= OP_SBRA);
1717        do        do
1718          {          {
1719            if (cbegroup) md->match_function_type = MATCH_CBEGROUP;
1720          RMATCH(eptr, callpat + _pcre_OP_lengths[*callpat], offset_top,          RMATCH(eptr, callpat + _pcre_OP_lengths[*callpat], offset_top,
1721            md, ims, eptrb, flags, RM6);            md, eptrb, RM6);
1722          if (rrc == MATCH_MATCH)          memcpy(md->offset_vector, new_recursive.offset_save,
1723                new_recursive.saved_max * sizeof(int));
1724            md->recursive = new_recursive.prevrec;
1725            if (rrc == MATCH_MATCH || rrc == MATCH_ACCEPT)
1726            {            {
1727            DPRINTF(("Recursion matched\n"));            DPRINTF(("Recursion matched\n"));
           md->recursive = new_recursive.prevrec;  
1728            if (new_recursive.offset_save != stacksave)            if (new_recursive.offset_save != stacksave)
1729              (pcre_free)(new_recursive.offset_save);              (pcre_free)(new_recursive.offset_save);
1730            RRETURN(MATCH_MATCH);  
1731              /* Set where we got to in the subject, and reset the start in case
1732              it was changed by \K. This *is* propagated back out of a recursion,
1733              for Perl compatibility. */
1734    
1735              eptr = md->end_match_ptr;
1736              mstart = md->start_match_ptr;
1737              goto RECURSION_MATCHED;        /* Exit loop; end processing */
1738            }            }
1739    
1740            /* PCRE does not allow THEN to escape beyond a recursion; it is treated
1741            as NOMATCH. */
1742    
1743          else if (rrc != MATCH_NOMATCH && rrc != MATCH_THEN)          else if (rrc != MATCH_NOMATCH && rrc != MATCH_THEN)
1744            {            {
1745            DPRINTF(("Recursion gave error %d\n", rrc));            DPRINTF(("Recursion gave error %d\n", rrc));
# Line 1169  for (;;) Line 1749  for (;;)
1749            }            }
1750    
1751          md->recursive = &new_recursive;          md->recursive = &new_recursive;
         memcpy(md->offset_vector, new_recursive.offset_save,  
             new_recursive.saved_max * sizeof(int));  
1752          callpat += GET(callpat, 1);          callpat += GET(callpat, 1);
1753          }          }
1754        while (*callpat == OP_ALT);        while (*callpat == OP_ALT);
# Line 1179  for (;;) Line 1757  for (;;)
1757        md->recursive = new_recursive.prevrec;        md->recursive = new_recursive.prevrec;
1758        if (new_recursive.offset_save != stacksave)        if (new_recursive.offset_save != stacksave)
1759          (pcre_free)(new_recursive.offset_save);          (pcre_free)(new_recursive.offset_save);
1760        RRETURN(MATCH_NOMATCH);        MRRETURN(MATCH_NOMATCH);
       }  
     /* Control never reaches here */  
   
     /* "Once" brackets are like assertion brackets except that after a match,  
     the point in the subject string is not moved back. Thus there can never be  
     a move back into the brackets. Friedl calls these "atomic" subpatterns.  
     Check the alternative branches in turn - the matching won't pass the KET  
     for this kind of subpattern. If any one branch matches, we carry on as at  
     the end of a normal bracket, leaving the subject pointer. */  
   
     case OP_ONCE:  
     prev = ecode;  
     saved_eptr = eptr;  
   
     do  
       {  
       RMATCH(eptr, ecode + 1 + LINK_SIZE, offset_top, md, ims, eptrb, 0, RM7);  
       if (rrc == MATCH_MATCH) break;  
       if (rrc != MATCH_NOMATCH && rrc != MATCH_THEN) RRETURN(rrc);  
       ecode += GET(ecode,1);  
       }  
     while (*ecode == OP_ALT);  
   
     /* If hit the end of the group (which could be repeated), fail */  
   
     if (*ecode != OP_ONCE && *ecode != OP_ALT) RRETURN(MATCH_NOMATCH);  
   
     /* Continue as from after the assertion, updating the offsets high water  
     mark, since extracts may have been taken. */  
   
     do ecode += GET(ecode, 1); while (*ecode == OP_ALT);  
   
     offset_top = md->end_offset_top;  
     eptr = md->end_match_ptr;  
   
     /* For a non-repeating ket, just continue at this level. This also  
     happens for a repeating ket if no characters were matched in the group.  
     This is the forcible breaking of infinite loops as implemented in Perl  
     5.005. If there is an options reset, it will get obeyed in the normal  
     course of events. */  
   
     if (*ecode == OP_KET || eptr == saved_eptr)  
       {  
       ecode += 1+LINK_SIZE;  
       break;  
1761        }        }
1762    
1763      /* The repeating kets try the rest of the pattern or restart from the      RECURSION_MATCHED:
1764      preceding bracket, in the appropriate order. The second "call" of match()      break;
     uses tail recursion, to avoid using another stack frame. We need to reset  
     any options that changed within the bracket before re-running it, so  
     check the next opcode. */  
   
     if (ecode[1+LINK_SIZE] == OP_OPT)  
       {  
       ims = (ims & ~PCRE_IMS) | ecode[4];  
       DPRINTF(("ims set to %02lx at group repeat\n", ims));  
       }  
   
     if (*ecode == OP_KETRMIN)  
       {  
       RMATCH(eptr, ecode + 1 + LINK_SIZE, offset_top, md, ims, eptrb, 0, RM8);  
       if (rrc != MATCH_NOMATCH) RRETURN(rrc);  
       ecode = prev;  
       flags = 0;  
       goto TAIL_RECURSE;  
       }  
     else  /* OP_KETRMAX */  
       {  
       RMATCH(eptr, prev, offset_top, md, ims, eptrb, match_cbegroup, RM9);  
       if (rrc != MATCH_NOMATCH) RRETURN(rrc);  
       ecode += 1 + LINK_SIZE;  
       flags = 0;  
       goto TAIL_RECURSE;  
       }  
     /* Control never gets here */  
1765    
1766      /* An alternation is the end of a branch; scan along to find the end of the      /* An alternation is the end of a branch; scan along to find the end of the
1767      bracketed group and go to there. */      bracketed group and go to there. */
# Line 1271  for (;;) Line 1777  for (;;)
1777      optional ones preceded by BRAZERO or BRAMINZERO. */      optional ones preceded by BRAZERO or BRAMINZERO. */
1778    
1779      case OP_BRAZERO:      case OP_BRAZERO:
1780        {      next = ecode + 1;
1781        next = ecode+1;      RMATCH(eptr, next, offset_top, md, eptrb, RM10);
1782        RMATCH(eptr, next, offset_top, md, ims, eptrb, 0, RM10);      if (rrc != MATCH_NOMATCH) RRETURN(rrc);
1783        if (rrc != MATCH_NOMATCH) RRETURN(rrc);      do next += GET(next, 1); while (*next == OP_ALT);
1784        do next += GET(next,1); while (*next == OP_ALT);      ecode = next + 1 + LINK_SIZE;
       ecode = next + 1 + LINK_SIZE;  
       }  
1785      break;      break;
1786    
1787      case OP_BRAMINZERO:      case OP_BRAMINZERO:
1788        {      next = ecode + 1;
1789        next = ecode+1;      do next += GET(next, 1); while (*next == OP_ALT);
1790        do next += GET(next, 1); while (*next == OP_ALT);      RMATCH(eptr, next + 1+LINK_SIZE, offset_top, md, eptrb, RM11);
1791        RMATCH(eptr, next + 1+LINK_SIZE, offset_top, md, ims, eptrb, 0, RM11);      if (rrc != MATCH_NOMATCH) RRETURN(rrc);
1792        if (rrc != MATCH_NOMATCH) RRETURN(rrc);      ecode++;
       ecode++;  
       }  
1793      break;      break;
1794    
1795      case OP_SKIPZERO:      case OP_SKIPZERO:
1796        {      next = ecode+1;
1797        next = ecode+1;      do next += GET(next,1); while (*next == OP_ALT);
1798        do next += GET(next,1); while (*next == OP_ALT);      ecode = next + 1 + LINK_SIZE;
       ecode = next + 1 + LINK_SIZE;  
       }  
1799      break;      break;
1800    
1801        /* BRAPOSZERO occurs before a possessive bracket group. Don't do anything
1802        here; just jump to the group, with allow_zero set TRUE. */
1803    
1804        case OP_BRAPOSZERO:
1805        op = *(++ecode);
1806        allow_zero = TRUE;
1807        if (op == OP_CBRAPOS || op == OP_SCBRAPOS) goto POSSESSIVE_CAPTURE;
1808          goto POSSESSIVE_NON_CAPTURE;
1809    
1810      /* End of a group, repeated or non-repeating. */      /* End of a group, repeated or non-repeating. */
1811    
1812      case OP_KET:      case OP_KET:
1813      case OP_KETRMIN:      case OP_KETRMIN:
1814      case OP_KETRMAX:      case OP_KETRMAX:
1815        case OP_KETRPOS:
1816      prev = ecode - GET(ecode, 1);      prev = ecode - GET(ecode, 1);
1817    
1818      /* If this was a group that remembered the subject start, in order to break      /* If this was a group that remembered the subject start, in order to break
1819      infinite repeats of empty string matches, retrieve the subject start from      infinite repeats of empty string matches, retrieve the subject start from
1820      the chain. Otherwise, set it NULL. */      the chain. Otherwise, set it NULL. */
1821    
1822      if (*prev >= OP_SBRA)      if (*prev >= OP_SBRA || *prev == OP_ONCE)
1823        {        {
1824        saved_eptr = eptrb->epb_saved_eptr;   /* Value at start of group */        saved_eptr = eptrb->epb_saved_eptr;   /* Value at start of group */
1825        eptrb = eptrb->epb_prev;              /* Backup to previous group */        eptrb = eptrb->epb_prev;              /* Backup to previous group */
1826        }        }
1827      else saved_eptr = NULL;      else saved_eptr = NULL;
1828    
1829      /* If we are at the end of an assertion group, stop matching and return      /* If we are at the end of an assertion group or a non-capturing atomic
1830      MATCH_MATCH, but record the current high water mark for use by positive      group, stop matching and return MATCH_MATCH, but record the current high
1831      assertions. Do this also for the "once" (atomic) groups. */      water mark for use by positive assertions. We also need to record the match
1832        start in case it was changed by \K. */
1833      if (*prev == OP_ASSERT || *prev == OP_ASSERT_NOT ||  
1834          *prev == OP_ASSERTBACK || *prev == OP_ASSERTBACK_NOT ||      if ((*prev >= OP_ASSERT && *prev <= OP_ASSERTBACK_NOT) ||
1835          *prev == OP_ONCE)           *prev == OP_ONCE_NC)
1836        {        {
1837        md->end_match_ptr = eptr;      /* For ONCE */        md->end_match_ptr = eptr;      /* For ONCE_NC */
1838        md->end_offset_top = offset_top;        md->end_offset_top = offset_top;
1839        RRETURN(MATCH_MATCH);        md->start_match_ptr = mstart;
1840          MRRETURN(MATCH_MATCH);         /* Sets md->mark */
1841        }        }
1842    
1843      /* For capturing groups we have to check the group number back at the start      /* For capturing groups we have to check the group number back at the start
1844      and if necessary complete handling an extraction by setting the offsets and      and if necessary complete handling an extraction by setting the offsets and
1845      bumping the high water mark. Note that whole-pattern recursion is coded as      bumping the high water mark. Whole-pattern recursion is coded as a recurse
1846      a recurse into group 0, so it won't be picked up here. Instead, we catch it      into group 0, so it won't be picked up here. Instead, we catch it when the
1847      when the OP_END is reached. Other recursion is handled here. */      OP_END is reached. Other recursion is handled here. We just have to record
1848        the current subject position and start match pointer and give a MATCH
1849        return. */
1850    
1851      if (*prev == OP_CBRA || *prev == OP_SCBRA)      if (*prev == OP_CBRA || *prev == OP_SCBRA ||
1852            *prev == OP_CBRAPOS || *prev == OP_SCBRAPOS)
1853        {        {
1854        number = GET2(prev, 1+LINK_SIZE);        number = GET2(prev, 1+LINK_SIZE);
1855        offset = number << 1;        offset = number << 1;
1856    
1857  #ifdef DEBUG  #ifdef PCRE_DEBUG
1858        printf("end bracket %d", number);        printf("end bracket %d", number);
1859        printf("\n");        printf("\n");
1860  #endif  #endif
1861    
1862          /* Handle a recursively called group. */
1863    
1864          if (md->recursive != NULL && md->recursive->group_num == number)
1865            {
1866            md->end_match_ptr = eptr;
1867            md->start_match_ptr = mstart;
1868            RRETURN(MATCH_MATCH);
1869            }
1870    
1871          /* Deal with capturing */
1872    
1873        md->capture_last = number;        md->capture_last = number;
1874        if (offset >= md->offset_max) md->offset_overflow = TRUE; else        if (offset >= md->offset_max) md->offset_overflow = TRUE; else
1875          {          {
1876            /* If offset is greater than offset_top, it means that we are
1877            "skipping" a capturing group, and that group's offsets must be marked
1878            unset. In earlier versions of PCRE, all the offsets were unset at the
1879            start of matching, but this doesn't work because atomic groups and
1880            assertions can cause a value to be set that should later be unset.
1881            Example: matching /(?>(a))b|(a)c/ against "ac". This sets group 1 as
1882            part of the atomic group, but this is not on the final matching path,
1883            so must be unset when 2 is set. (If there is no group 2, there is no
1884            problem, because offset_top will then be 2, indicating no capture.) */
1885    
1886            if (offset > offset_top)
1887              {
1888              register int *iptr = md->offset_vector + offset_top;
1889              register int *iend = md->offset_vector + offset;
1890              while (iptr < iend) *iptr++ = -1;
1891              }
1892    
1893            /* Now make the extraction */
1894    
1895          md->offset_vector[offset] =          md->offset_vector[offset] =
1896            md->offset_vector[md->offset_end - number];            md->offset_vector[md->offset_end - number];
1897          md->offset_vector[offset+1] = eptr - md->start_subject;          md->offset_vector[offset+1] = (int)(eptr - md->start_subject);
1898          if (offset_top <= offset) offset_top = offset + 2;          if (offset_top <= offset) offset_top = offset + 2;
1899          }          }
1900          }
1901    
1902        /* Handle a recursively called group. Restore the offsets      /* For an ordinary non-repeating ket, just continue at this level. This
1903        appropriately and continue from after the call. */      also happens for a repeating ket if no characters were matched in the
1904        group. This is the forcible breaking of infinite loops as implemented in
1905        Perl 5.005. For a non-repeating atomic group that includes captures,
1906        establish a backup point by processing the rest of the pattern at a lower
1907        level. If this results in a NOMATCH return, pass MATCH_ONCE back to the
1908        original OP_ONCE level, thereby bypassing intermediate backup points, but
1909        resetting any captures that happened along the way. */
1910    
1911        if (md->recursive != NULL && md->recursive->group_num == number)      if (*ecode == OP_KET || eptr == saved_eptr)
1912          {
1913          if (*prev == OP_ONCE)
1914          {          {
1915          recursion_info *rec = md->recursive;          RMATCH(eptr, ecode + 1 + LINK_SIZE, offset_top, md, eptrb, RM12);
1916          DPRINTF(("Recursion (%d) succeeded - continuing\n", number));          if (rrc != MATCH_NOMATCH) RRETURN(rrc);
1917          md->recursive = rec->prevrec;          md->once_target = prev;  /* Level at which to change to MATCH_NOMATCH */
1918          mstart = rec->save_start;          RRETURN(MATCH_ONCE);
         memcpy(md->offset_vector, rec->offset_save,  
           rec->saved_max * sizeof(int));  
         offset_top = rec->offset_top;  
         ecode = rec->after_call;  
         ims = original_ims;  
         break;  
1919          }          }
1920          ecode += 1 + LINK_SIZE;    /* Carry on at this level */
1921          break;
1922        }        }
1923    
1924      /* For both capturing and non-capturing groups, reset the value of the ims      /* OP_KETRPOS is a possessive repeating ket. Remember the current position,
1925      flags, in case they got changed during the group. */      and return the MATCH_KETRPOS. This makes it possible to do the repeats one
1926        at a time from the outer level, thus saving stack. */
1927    
1928      ims = original_ims;      if (*ecode == OP_KETRPOS)
     DPRINTF(("ims reset to %02lx\n", ims));  
   
     /* For a non-repeating ket, just continue at this level. This also  
     happens for a repeating ket if no characters were matched in the group.  
     This is the forcible breaking of infinite loops as implemented in Perl  
     5.005. If there is an options reset, it will get obeyed in the normal  
     course of events. */  
   
     if (*ecode == OP_KET || eptr == saved_eptr)  
1929        {        {
1930        ecode += 1 + LINK_SIZE;        md->end_match_ptr = eptr;
1931        break;        md->end_offset_top = offset_top;
1932          RRETURN(MATCH_KETRPOS);
1933        }        }
1934    
1935      /* The repeating kets try the rest of the pattern or restart from the      /* The normal repeating kets try the rest of the pattern or restart from
1936      preceding bracket, in the appropriate order. In the second case, we can use      the preceding bracket, in the appropriate order. In the second case, we can
1937      tail recursion to avoid using another stack frame, unless we have an      use tail recursion to avoid using another stack frame, unless we have an
1938      unlimited repeat of a group that can match an empty string. */      an atomic group or an unlimited repeat of a group that can match an empty
1939        string. */
     flags = (*prev >= OP_SBRA)? match_cbegroup : 0;  
1940    
1941      if (*ecode == OP_KETRMIN)      if (*ecode == OP_KETRMIN)
1942        {        {
1943        RMATCH(eptr, ecode + 1 + LINK_SIZE, offset_top, md, ims, eptrb, 0, RM12);        RMATCH(eptr, ecode + 1 + LINK_SIZE, offset_top, md, eptrb, RM7);
1944        if (rrc != MATCH_NOMATCH) RRETURN(rrc);        if (rrc != MATCH_NOMATCH) RRETURN(rrc);
1945        if (flags != 0)    /* Could match an empty string */        if (*prev == OP_ONCE)
1946            {
1947            RMATCH(eptr, prev, offset_top, md, eptrb, RM8);
1948            if (rrc != MATCH_NOMATCH) RRETURN(rrc);
1949            md->once_target = prev;  /* Level at which to change to MATCH_NOMATCH */
1950            RRETURN(MATCH_ONCE);
1951            }
1952          if (*prev >= OP_SBRA)    /* Could match an empty string */
1953          {          {
1954          RMATCH(eptr, prev, offset_top, md, ims, eptrb, flags, RM50);          md->match_function_type = MATCH_CBEGROUP;
1955            RMATCH(eptr, prev, offset_top, md, eptrb, RM50);
1956          RRETURN(rrc);          RRETURN(rrc);
1957          }          }
1958        ecode = prev;        ecode = prev;
# Line 1411  for (;;) Line 1960  for (;;)
1960        }        }
1961      else  /* OP_KETRMAX */      else  /* OP_KETRMAX */
1962        {        {
1963        RMATCH(eptr, prev, offset_top, md, ims, eptrb, flags, RM13);        if (*prev >= OP_SBRA) md->match_function_type = MATCH_CBEGROUP;
1964          RMATCH(eptr, prev, offset_top, md, eptrb, RM13);
1965          if (rrc == MATCH_ONCE && md->once_target == prev) rrc = MATCH_NOMATCH;
1966        if (rrc != MATCH_NOMATCH) RRETURN(rrc);        if (rrc != MATCH_NOMATCH) RRETURN(rrc);
1967          if (*prev == OP_ONCE)
1968            {
1969            RMATCH(eptr, ecode + 1 + LINK_SIZE, offset_top, md, eptrb, RM9);
1970            if (rrc != MATCH_NOMATCH) RRETURN(rrc);
1971            md->once_target = prev;
1972            RRETURN(MATCH_ONCE);
1973            }
1974        ecode += 1 + LINK_SIZE;        ecode += 1 + LINK_SIZE;
       flags = 0;  
1975        goto TAIL_RECURSE;        goto TAIL_RECURSE;
1976        }        }
1977      /* Control never gets here */      /* Control never gets here */
1978    
1979      /* Start of subject unless notbol, or after internal newline if multiline */      /* Not multiline mode: start of subject assertion, unless notbol. */
1980    
1981      case OP_CIRC:      case OP_CIRC:
1982      if (md->notbol && eptr == md->start_subject) RRETURN(MATCH_NOMATCH);      if (md->notbol && eptr == md->start_subject) MRRETURN(MATCH_NOMATCH);
     if ((ims & PCRE_MULTILINE) != 0)  
       {  
       if (eptr != md->start_subject &&  
           (eptr == md->end_subject || !WAS_NEWLINE(eptr)))  
         RRETURN(MATCH_NOMATCH);  
       ecode++;  
       break;  
       }  
     /* ... else fall through */  
1983    
1984      /* Start of subject assertion */      /* Start of subject assertion */
1985    
1986      case OP_SOD:      case OP_SOD:
1987      if (eptr != md->start_subject) RRETURN(MATCH_NOMATCH);      if (eptr != md->start_subject) MRRETURN(MATCH_NOMATCH);
1988        ecode++;
1989        break;
1990    
1991        /* Multiline mode: start of subject unless notbol, or after any newline. */
1992    
1993        case OP_CIRCM:
1994        if (md->notbol && eptr == md->start_subject) MRRETURN(MATCH_NOMATCH);
1995        if (eptr != md->start_subject &&
1996            (eptr == md->end_subject || !WAS_NEWLINE(eptr)))
1997          MRRETURN(MATCH_NOMATCH);
1998      ecode++;      ecode++;
1999      break;      break;
2000    
2001      /* Start of match assertion */      /* Start of match assertion */
2002    
2003      case OP_SOM:      case OP_SOM:
2004      if (eptr != md->start_subject + md->start_offset) RRETURN(MATCH_NOMATCH);      if (eptr != md->start_subject + md->start_offset) MRRETURN(MATCH_NOMATCH);
2005      ecode++;      ecode++;
2006      break;      break;
2007    
# Line 1454  for (;;) Line 2012  for (;;)
2012      ecode++;      ecode++;
2013      break;      break;
2014    
2015      /* Assert before internal newline if multiline, or before a terminating      /* Multiline mode: assert before any newline, or before end of subject
2016      newline unless endonly is set, else end of subject unless noteol is set. */      unless noteol is set. */
2017    
2018      case OP_DOLL:      case OP_DOLLM:
2019      if ((ims & PCRE_MULTILINE) != 0)      if (eptr < md->end_subject)
2020        {        { if (!IS_NEWLINE(eptr)) MRRETURN(MATCH_NOMATCH); }
       if (eptr < md->end_subject)  
         { if (!IS_NEWLINE(eptr)) RRETURN(MATCH_NOMATCH); }  
       else  
         { if (md->noteol) RRETURN(MATCH_NOMATCH); }  
       ecode++;  
       break;  
       }  
2021      else      else
2022        {        {
2023        if (md->noteol) RRETURN(MATCH_NOMATCH);        if (md->noteol) MRRETURN(MATCH_NOMATCH);
2024        if (!md->endonly)        SCHECK_PARTIAL();
         {  
         if (eptr != md->end_subject &&  
             (!IS_NEWLINE(eptr) || eptr != md->end_subject - md->nllen))  
           RRETURN(MATCH_NOMATCH);  
         ecode++;  
         break;  
         }  
2025        }        }
2026        ecode++;
2027        break;
2028    
2029        /* Not multiline mode: assert before a terminating newline or before end of
2030        subject unless noteol is set. */
2031    
2032        case OP_DOLL:
2033        if (md->noteol) MRRETURN(MATCH_NOMATCH);
2034        if (!md->endonly) goto ASSERT_NL_OR_EOS;
2035    
2036      /* ... else fall through for endonly */      /* ... else fall through for endonly */
2037    
2038      /* End of subject assertion (\z) */      /* End of subject assertion (\z) */
2039    
2040      case OP_EOD:      case OP_EOD:
2041      if (eptr < md->end_subject) RRETURN(MATCH_NOMATCH);      if (eptr < md->end_subject) MRRETURN(MATCH_NOMATCH);
2042        SCHECK_PARTIAL();
2043      ecode++;      ecode++;
2044      break;      break;
2045    
2046      /* End of subject or ending \n assertion (\Z) */      /* End of subject or ending \n assertion (\Z) */
2047    
2048      case OP_EODN:      case OP_EODN:
2049      if (eptr != md->end_subject &&      ASSERT_NL_OR_EOS:
2050        if (eptr < md->end_subject &&
2051          (!IS_NEWLINE(eptr) || eptr != md->end_subject - md->nllen))          (!IS_NEWLINE(eptr) || eptr != md->end_subject - md->nllen))
2052        RRETURN(MATCH_NOMATCH);        MRRETURN(MATCH_NOMATCH);
2053    
2054        /* Either at end of string or \n before end. */
2055    
2056        SCHECK_PARTIAL();
2057      ecode++;      ecode++;
2058      break;      break;
2059    
# Line 1511  for (;;) Line 2071  for (;;)
2071  #ifdef SUPPORT_UTF8  #ifdef SUPPORT_UTF8
2072        if (utf8)        if (utf8)
2073          {          {
2074            /* Get status of previous character */
2075    
2076          if (eptr == md->start_subject) prev_is_word = FALSE; else          if (eptr == md->start_subject) prev_is_word = FALSE; else
2077            {            {
2078            USPTR lastptr = eptr - 1;            USPTR lastptr = eptr - 1;
2079            while((*lastptr & 0xc0) == 0x80) lastptr--;            while((*lastptr & 0xc0) == 0x80) lastptr--;
2080            if (lastptr < md->start_used_ptr) md->start_used_ptr = lastptr;            if (lastptr < md->start_used_ptr) md->start_used_ptr = lastptr;
2081            GETCHAR(c, lastptr);            GETCHAR(c, lastptr);
2082    #ifdef SUPPORT_UCP
2083              if (md->use_ucp)
2084                {
2085                if (c == '_') prev_is_word = TRUE; else
2086                  {
2087                  int cat = UCD_CATEGORY(c);
2088                  prev_is_word = (cat == ucp_L || cat == ucp_N);
2089                  }
2090                }
2091              else
2092    #endif
2093            prev_is_word = c < 256 && (md->ctypes[c] & ctype_word) != 0;            prev_is_word = c < 256 && (md->ctypes[c] & ctype_word) != 0;
2094            }            }
2095    
2096            /* Get status of next character */
2097    
2098          if (eptr >= md->end_subject)          if (eptr >= md->end_subject)
2099            {            {
2100            SCHECK_PARTIAL();            SCHECK_PARTIAL();
# Line 1527  for (;;) Line 2103  for (;;)
2103          else          else
2104            {            {
2105            GETCHAR(c, eptr);            GETCHAR(c, eptr);
2106    #ifdef SUPPORT_UCP
2107              if (md->use_ucp)
2108                {
2109                if (c == '_') cur_is_word = TRUE; else
2110                  {
2111                  int cat = UCD_CATEGORY(c);
2112                  cur_is_word = (cat == ucp_L || cat == ucp_N);
2113                  }
2114                }
2115              else
2116    #endif
2117            cur_is_word = c < 256 && (md->ctypes[c] & ctype_word) != 0;            cur_is_word = c < 256 && (md->ctypes[c] & ctype_word) != 0;
2118            }            }
2119          }          }
2120        else        else
2121  #endif  #endif
2122    
2123        /* Not in UTF-8 mode */        /* Not in UTF-8 mode, but we may still have PCRE_UCP set, and for
2124          consistency with the behaviour of \w we do use it in this case. */
2125    
2126          {          {
2127            /* Get status of previous character */
2128    
2129          if (eptr == md->start_subject) prev_is_word = FALSE; else          if (eptr == md->start_subject) prev_is_word = FALSE; else
2130            {            {
2131            if (eptr <= md->start_used_ptr) md->start_used_ptr = eptr - 1;            if (eptr <= md->start_used_ptr) md->start_used_ptr = eptr - 1;
2132    #ifdef SUPPORT_UCP
2133              if (md->use_ucp)
2134                {
2135                c = eptr[-1];
2136                if (c == '_') prev_is_word = TRUE; else
2137                  {
2138                  int cat = UCD_CATEGORY(c);
2139                  prev_is_word = (cat == ucp_L || cat == ucp_N);
2140                  }
2141                }
2142              else
2143    #endif
2144            prev_is_word = ((md->ctypes[eptr[-1]] & ctype_word) != 0);            prev_is_word = ((md->ctypes[eptr[-1]] & ctype_word) != 0);
2145            }            }
2146    
2147            /* Get status of next character */
2148    
2149          if (eptr >= md->end_subject)          if (eptr >= md->end_subject)
2150            {            {
2151            SCHECK_PARTIAL();            SCHECK_PARTIAL();
2152            cur_is_word = FALSE;            cur_is_word = FALSE;
2153            }            }
2154          else cur_is_word = ((md->ctypes[*eptr] & ctype_word) != 0);          else
2155    #ifdef SUPPORT_UCP
2156            if (md->use_ucp)
2157              {
2158              c = *eptr;
2159              if (c == '_') cur_is_word = TRUE; else
2160                {
2161                int cat = UCD_CATEGORY(c);
2162                cur_is_word = (cat == ucp_L || cat == ucp_N);
2163                }
2164              }
2165            else
2166    #endif
2167            cur_is_word = ((md->ctypes[*eptr] & ctype_word) != 0);
2168          }          }
2169    
2170        /* Now see if the situation is what we want */        /* Now see if the situation is what we want */
2171    
2172        if ((*ecode++ == OP_WORD_BOUNDARY)?        if ((*ecode++ == OP_WORD_BOUNDARY)?
2173             cur_is_word == prev_is_word : cur_is_word != prev_is_word)             cur_is_word == prev_is_word : cur_is_word != prev_is_word)
2174          RRETURN(MATCH_NOMATCH);          MRRETURN(MATCH_NOMATCH);
2175        }        }
2176      break;      break;
2177    
2178      /* Match a single character type; inline for speed */      /* Match a single character type; inline for speed */
2179    
2180      case OP_ANY:      case OP_ANY:
2181      if (IS_NEWLINE(eptr)) RRETURN(MATCH_NOMATCH);      if (IS_NEWLINE(eptr)) MRRETURN(MATCH_NOMATCH);
2182      /* Fall through */      /* Fall through */
2183    
2184      case OP_ALLANY:      case OP_ALLANY:
2185      if (eptr++ >= md->end_subject)      if (eptr >= md->end_subject)   /* DO NOT merge the eptr++ here; it must */
2186        {        {                            /* not be updated before SCHECK_PARTIAL. */
2187        SCHECK_PARTIAL();        SCHECK_PARTIAL();
2188        RRETURN(MATCH_NOMATCH);        MRRETURN(MATCH_NOMATCH);
2189        }        }
2190        eptr++;
2191      if (utf8) while (eptr < md->end_subject && (*eptr & 0xc0) == 0x80) eptr++;      if (utf8) while (eptr < md->end_subject && (*eptr & 0xc0) == 0x80) eptr++;
2192      ecode++;      ecode++;
2193      break;      break;
# Line 1577  for (;;) Line 2196  for (;;)
2196      any byte, even newline, independent of the setting of PCRE_DOTALL. */      any byte, even newline, independent of the setting of PCRE_DOTALL. */
2197    
2198      case OP_ANYBYTE:      case OP_ANYBYTE:
2199      if (eptr++ >= md->end_subject)      if (eptr >= md->end_subject)   /* DO NOT merge the eptr++ here; it must */
2200        {        {                            /* not be updated before SCHECK_PARTIAL. */
2201        SCHECK_PARTIAL();        SCHECK_PARTIAL();
2202        RRETURN(MATCH_NOMATCH);        MRRETURN(MATCH_NOMATCH);
2203        }        }
2204        eptr++;
2205      ecode++;      ecode++;
2206      break;      break;
2207    
# Line 1589  for (;;) Line 2209  for (;;)
2209      if (eptr >= md->end_subject)      if (eptr >= md->end_subject)
2210        {        {
2211        SCHECK_PARTIAL();        SCHECK_PARTIAL();
2212        RRETURN(MATCH_NOMATCH);        MRRETURN(MATCH_NOMATCH);
2213        }        }
2214      GETCHARINCTEST(c, eptr);      GETCHARINCTEST(c, eptr);
2215      if (      if (
# Line 1598  for (;;) Line 2218  for (;;)
2218  #endif  #endif
2219         (md->ctypes[c] & ctype_digit) != 0         (md->ctypes[c] & ctype_digit) != 0
2220         )         )
2221        RRETURN(MATCH_NOMATCH);        MRRETURN(MATCH_NOMATCH);
2222      ecode++;      ecode++;
2223      break;      break;
2224    
# Line 1606  for (;;) Line 2226  for (;;)
2226      if (eptr >= md->end_subject)      if (eptr >= md->end_subject)
2227        {        {
2228        SCHECK_PARTIAL();        SCHECK_PARTIAL();
2229        RRETURN(MATCH_NOMATCH);        MRRETURN(MATCH_NOMATCH);
2230        }        }
2231      GETCHARINCTEST(c, eptr);      GETCHARINCTEST(c, eptr);
2232      if (      if (
# Line 1615  for (;;) Line 2235  for (;;)
2235  #endif  #endif
2236         (md->ctypes[c] & ctype_digit) == 0         (md->ctypes[c] & ctype_digit) == 0
2237         )         )
2238        RRETURN(MATCH_NOMATCH);        MRRETURN(MATCH_NOMATCH);
2239      ecode++;      ecode++;
2240      break;      break;
2241    
# Line 1623  for (;;) Line 2243  for (;;)
2243      if (eptr >= md->end_subject)      if (eptr >= md->end_subject)
2244        {        {
2245        SCHECK_PARTIAL();        SCHECK_PARTIAL();
2246        RRETURN(MATCH_NOMATCH);        MRRETURN(MATCH_NOMATCH);
2247        }        }
2248      GETCHARINCTEST(c, eptr);      GETCHARINCTEST(c, eptr);
2249      if (      if (
# Line 1632  for (;;) Line 2252  for (;;)
2252  #endif  #endif
2253         (md->ctypes[c] & ctype_space) != 0         (md->ctypes[c] & ctype_space) != 0
2254         )         )
2255        RRETURN(MATCH_NOMATCH);        MRRETURN(MATCH_NOMATCH);
2256      ecode++;      ecode++;
2257      break;      break;
2258    
# Line 1640  for (;;) Line 2260  for (;;)
2260      if (eptr >= md->end_subject)      if (eptr >= md->end_subject)
2261        {        {
2262        SCHECK_PARTIAL();        SCHECK_PARTIAL();
2263        RRETURN(MATCH_NOMATCH);        MRRETURN(MATCH_NOMATCH);
2264        }        }
2265      GETCHARINCTEST(c, eptr);      GETCHARINCTEST(c, eptr);
2266      if (      if (
# Line 1649  for (;;) Line 2269  for (;;)
2269  #endif  #endif
2270         (md->ctypes[c] & ctype_space) == 0         (md->ctypes[c] & ctype_space) == 0
2271         )         )
2272        RRETURN(MATCH_NOMATCH);        MRRETURN(MATCH_NOMATCH);
2273      ecode++;      ecode++;
2274      break;      break;
2275    
# Line 1657  for (;;) Line 2277  for (;;)
2277      if (eptr >= md->end_subject)      if (eptr >= md->end_subject)
2278        {        {
2279        SCHECK_PARTIAL();        SCHECK_PARTIAL();
2280        RRETURN(MATCH_NOMATCH);        MRRETURN(MATCH_NOMATCH);
2281        }        }
2282      GETCHARINCTEST(c, eptr);      GETCHARINCTEST(c, eptr);
2283      if (      if (
# Line 1666  for (;;) Line 2286  for (;;)
2286  #endif  #endif
2287         (md->ctypes[c] & ctype_word) != 0         (md->ctypes[c] & ctype_word) != 0
2288         )         )
2289        RRETURN(MATCH_NOMATCH);        MRRETURN(MATCH_NOMATCH);
2290      ecode++;      ecode++;
2291      break;      break;
2292    
# Line 1674  for (;;) Line 2294  for (;;)
2294      if (eptr >= md->end_subject)      if (eptr >= md->end_subject)
2295        {        {
2296        SCHECK_PARTIAL();        SCHECK_PARTIAL();
2297        RRETURN(MATCH_NOMATCH);        MRRETURN(MATCH_NOMATCH);
2298        }        }
2299      GETCHARINCTEST(c, eptr);      GETCHARINCTEST(c, eptr);
2300      if (      if (
# Line 1683  for (;;) Line 2303  for (;;)
2303  #endif  #endif
2304         (md->ctypes[c] & ctype_word) == 0         (md->ctypes[c] & ctype_word) == 0
2305         )         )
2306        RRETURN(MATCH_NOMATCH);        MRRETURN(MATCH_NOMATCH);
2307      ecode++;      ecode++;
2308      break;      break;
2309    
# Line 1691  for (;;) Line 2311  for (;;)
2311      if (eptr >= md->end_subject)      if (eptr >= md->end_subject)
2312        {        {
2313        SCHECK_PARTIAL();        SCHECK_PARTIAL();
2314        RRETURN(MATCH_NOMATCH);        MRRETURN(MATCH_NOMATCH);
2315        }        }
2316      GETCHARINCTEST(c, eptr);      GETCHARINCTEST(c, eptr);
2317      switch(c)      switch(c)
2318        {        {
2319        default: RRETURN(MATCH_NOMATCH);        default: MRRETURN(MATCH_NOMATCH);
2320    
2321        case 0x000d:        case 0x000d:
2322        if (eptr < md->end_subject && *eptr == 0x0a) eptr++;        if (eptr < md->end_subject && *eptr == 0x0a) eptr++;
2323        break;        break;
# Line 1709  for (;;) Line 2330  for (;;)
2330        case 0x0085:        case 0x0085:
2331        case 0x2028:        case 0x2028:
2332        case 0x2029:        case 0x2029:
2333        if (md->bsr_anycrlf) RRETURN(MATCH_NOMATCH);        if (md->bsr_anycrlf) MRRETURN(MATCH_NOMATCH);
2334        break;        break;
2335        }        }
2336      ecode++;      ecode++;
# Line 1719  for (;;) Line 2340  for (;;)
2340      if (eptr >= md->end_subject)      if (eptr >= md->end_subject)
2341        {        {
2342        SCHECK_PARTIAL();        SCHECK_PARTIAL();
2343        RRETURN(MATCH_NOMATCH);        MRRETURN(MATCH_NOMATCH);
2344        }        }
2345      GETCHARINCTEST(c, eptr);      GETCHARINCTEST(c, eptr);
2346      switch(c)      switch(c)
# Line 1744  for (;;) Line 2365  for (;;)
2365        case 0x202f:    /* NARROW NO-BREAK SPACE */        case 0x202f:    /* NARROW NO-BREAK SPACE */
2366        case 0x205f:    /* MEDIUM MATHEMATICAL SPACE */        case 0x205f:    /* MEDIUM MATHEMATICAL SPACE */
2367        case 0x3000:    /* IDEOGRAPHIC SPACE */        case 0x3000:    /* IDEOGRAPHIC SPACE */
2368        RRETURN(MATCH_NOMATCH);        MRRETURN(MATCH_NOMATCH);
2369        }        }
2370      ecode++;      ecode++;
2371      break;      break;
# Line 1753  for (;;) Line 2374  for (;;)
2374      if (eptr >= md->end_subject)      if (eptr >= md->end_subject)
2375        {        {
2376        SCHECK_PARTIAL();        SCHECK_PARTIAL();
2377        RRETURN(MATCH_NOMATCH);        MRRETURN(MATCH_NOMATCH);
2378        }        }
2379      GETCHARINCTEST(c, eptr);      GETCHARINCTEST(c, eptr);
2380      switch(c)      switch(c)
2381        {        {
2382        default: RRETURN(MATCH_NOMATCH);        default: MRRETURN(MATCH_NOMATCH);
2383        case 0x09:      /* HT */        case 0x09:      /* HT */
2384        case 0x20:      /* SPACE */        case 0x20:      /* SPACE */
2385        case 0xa0:      /* NBSP */        case 0xa0:      /* NBSP */
# Line 1787  for (;;) Line 2408  for (;;)
2408      if (eptr >= md->end_subject)      if (eptr >= md->end_subject)
2409        {        {
2410        SCHECK_PARTIAL();        SCHECK_PARTIAL();
2411        RRETURN(MATCH_NOMATCH);        MRRETURN(MATCH_NOMATCH);
2412        }        }
2413      GETCHARINCTEST(c, eptr);      GETCHARINCTEST(c, eptr);
2414      switch(c)      switch(c)
# Line 1800  for (;;) Line 2421  for (;;)
2421        case 0x85:      /* NEL */        case 0x85:      /* NEL */
2422        case 0x2028:    /* LINE SEPARATOR */        case 0x2028:    /* LINE SEPARATOR */
2423        case 0x2029:    /* PARAGRAPH SEPARATOR */        case 0x2029:    /* PARAGRAPH SEPARATOR */
2424        RRETURN(MATCH_NOMATCH);        MRRETURN(MATCH_NOMATCH);
2425        }        }
2426      ecode++;      ecode++;
2427      break;      break;
# Line 1809  for (;;) Line 2430  for (;;)
2430      if (eptr >= md->end_subject)      if (eptr >= md->end_subject)
2431        {        {
2432        SCHECK_PARTIAL();        SCHECK_PARTIAL();
2433        RRETURN(MATCH_NOMATCH);        MRRETURN(MATCH_NOMATCH);
2434        }        }
2435      GETCHARINCTEST(c, eptr);      GETCHARINCTEST(c, eptr);
2436      switch(c)      switch(c)
2437        {        {
2438        default: RRETURN(MATCH_NOMATCH);        default: MRRETURN(MATCH_NOMATCH);
2439        case 0x0a:      /* LF */        case 0x0a:      /* LF */
2440        case 0x0b:      /* VT */        case 0x0b:      /* VT */
2441        case 0x0c:      /* FF */        case 0x0c:      /* FF */
# Line 1836  for (;;) Line 2457  for (;;)
2457      if (eptr >= md->end_subject)      if (eptr >= md->end_subject)
2458        {        {
2459        SCHECK_PARTIAL();        SCHECK_PARTIAL();
2460        RRETURN(MATCH_NOMATCH);        MRRETURN(MATCH_NOMATCH);
2461        }        }
2462      GETCHARINCTEST(c, eptr);      GETCHARINCTEST(c, eptr);
2463        {        {
# Line 1845  for (;;) Line 2466  for (;;)
2466        switch(ecode[1])        switch(ecode[1])
2467          {          {
2468          case PT_ANY:          case PT_ANY:
2469          if (op == OP_NOTPROP) RRETURN(MATCH_NOMATCH);          if (op == OP_NOTPROP) MRRETURN(MATCH_NOMATCH);
2470          break;          break;
2471    
2472          case PT_LAMP:          case PT_LAMP:
2473          if ((prop->chartype == ucp_Lu ||          if ((prop->chartype == ucp_Lu ||
2474               prop->chartype == ucp_Ll ||               prop->chartype == ucp_Ll ||
2475               prop->chartype == ucp_Lt) == (op == OP_NOTPROP))               prop->chartype == ucp_Lt) == (op == OP_NOTPROP))
2476            RRETURN(MATCH_NOMATCH);            MRRETURN(MATCH_NOMATCH);
2477           break;          break;
2478    
2479          case PT_GC:          case PT_GC:
2480          if ((ecode[2] != _pcre_ucp_gentype[prop->chartype]) == (op == OP_PROP))          if ((ecode[2] != _pcre_ucp_gentype[prop->chartype]) == (op == OP_PROP))
2481            RRETURN(MATCH_NOMATCH);            MRRETURN(MATCH_NOMATCH);
2482          break;          break;
2483    
2484          case PT_PC:          case PT_PC:
2485          if ((ecode[2] != prop->chartype) == (op == OP_PROP))          if ((ecode[2] != prop->chartype) == (op == OP_PROP))
2486            RRETURN(MATCH_NOMATCH);            MRRETURN(MATCH_NOMATCH);
2487          break;          break;
2488    
2489          case PT_SC:          case PT_SC:
2490          if ((ecode[2] != prop->script) == (op == OP_PROP))          if ((ecode[2] != prop->script) == (op == OP_PROP))
2491            RRETURN(MATCH_NOMATCH);            MRRETURN(MATCH_NOMATCH);
2492          break;          break;
2493    
2494            /* These are specials */
2495    
2496            case PT_ALNUM:
2497            if ((_pcre_ucp_gentype[prop->chartype] == ucp_L ||
2498                 _pcre_ucp_gentype[prop->chartype] == ucp_N) == (op == OP_NOTPROP))
2499              MRRETURN(MATCH_NOMATCH);
2500            break;
2501    
2502            case PT_SPACE:    /* Perl space */
2503            if ((_pcre_ucp_gentype[prop->chartype] == ucp_Z ||
2504                 c == CHAR_HT || c == CHAR_NL || c == CHAR_FF || c == CHAR_CR)
2505                   == (op == OP_NOTPROP))
2506              MRRETURN(MATCH_NOMATCH);
2507            break;
2508    
2509            case PT_PXSPACE:  /* POSIX space */
2510            if ((_pcre_ucp_gentype[prop->chartype] == ucp_Z ||
2511                 c == CHAR_HT || c == CHAR_NL || c == CHAR_VT ||
2512                 c == CHAR_FF || c == CHAR_CR)
2513                   == (op == OP_NOTPROP))
2514              MRRETURN(MATCH_NOMATCH);
2515            break;
2516    
2517            case PT_WORD:
2518            if ((_pcre_ucp_gentype[prop->chartype] == ucp_L ||
2519                 _pcre_ucp_gentype[prop->chartype] == ucp_N ||
2520                 c == CHAR_UNDERSCORE) == (op == OP_NOTPROP))
2521              MRRETURN(MATCH_NOMATCH);
2522            break;
2523    
2524            /* This should never occur */
2525    
2526          default:          default:
2527          RRETURN(PCRE_ERROR_INTERNAL);          RRETURN(PCRE_ERROR_INTERNAL);
2528          }          }
# Line 1885  for (;;) Line 2538  for (;;)
2538      if (eptr >= md->end_subject)      if (eptr >= md->end_subject)
2539        {        {
2540        SCHECK_PARTIAL();        SCHECK_PARTIAL();
2541        RRETURN(MATCH_NOMATCH);        MRRETURN(MATCH_NOMATCH);
2542        }        }
2543      GETCHARINCTEST(c, eptr);      GETCHARINCTEST(c, eptr);
2544        if (UCD_CATEGORY(c) == ucp_M) MRRETURN(MATCH_NOMATCH);
2545        while (eptr < md->end_subject)
2546        {        {
2547        int category = UCD_CATEGORY(c);        int len = 1;
2548        if (category == ucp_M) RRETURN(MATCH_NOMATCH);        if (!utf8) c = *eptr; else { GETCHARLEN(c, eptr, len); }
2549        while (eptr < md->end_subject)        if (UCD_CATEGORY(c) != ucp_M) break;
2550          {        eptr += len;
         int len = 1;  
         if (!utf8) c = *eptr; else  
           {  
           GETCHARLEN(c, eptr, len);  
           }  
         category = UCD_CATEGORY(c);  
         if (category != ucp_M) break;  
         eptr += len;  
         }  
2551        }        }
2552      ecode++;      ecode++;
2553      break;      break;
# Line 1917  for (;;) Line 2563  for (;;)
2563      loops). */      loops). */
2564    
2565      case OP_REF:      case OP_REF:
2566        {      case OP_REFI:
2567        offset = GET2(ecode, 1) << 1;               /* Doubled ref number */      caseless = op == OP_REFI;
2568        ecode += 3;      offset = GET2(ecode, 1) << 1;               /* Doubled ref number */
2569        ecode += 3;
       /* If the reference is unset, there are two possibilities:  
2570    
2571        (a) In the default, Perl-compatible state, set the length to be longer      /* If the reference is unset, there are two possibilities:
       than the amount of subject left; this ensures that every attempt at a  
       match fails. We can't just fail here, because of the possibility of  
       quantifiers with zero minima.  
2572    
2573        (b) If the JavaScript compatibility flag is set, set the length to zero      (a) In the default, Perl-compatible state, set the length negative;
2574        so that the back reference matches an empty string.      this ensures that every attempt at a match fails. We can't just fail
2575        here, because of the possibility of quantifiers with zero minima.
2576    
2577        Otherwise, set the length to the length of what was matched by the      (b) If the JavaScript compatibility flag is set, set the length to zero
2578        referenced subpattern. */      so that the back reference matches an empty string.
2579    
2580        if (offset >= offset_top || md->offset_vector[offset] < 0)      Otherwise, set the length to the length of what was matched by the
2581          length = (md->jscript_compat)? 0 : md->end_subject - eptr + 1;      referenced subpattern. */
       else  
         length = md->offset_vector[offset+1] - md->offset_vector[offset];  
2582    
2583        /* Set up for repetition, or handle the non-repeated case */      if (offset >= offset_top || md->offset_vector[offset] < 0)
2584          length = (md->jscript_compat)? 0 : -1;
2585        switch (*ecode)      else
2586          {        length = md->offset_vector[offset+1] - md->offset_vector[offset];
         case OP_CRSTAR:  
         case OP_CRMINSTAR:  
         case OP_CRPLUS:  
         case OP_CRMINPLUS:  
         case OP_CRQUERY:  
         case OP_CRMINQUERY:  
         c = *ecode++ - OP_CRSTAR;  
         minimize = (c & 1) != 0;  
         min = rep_min[c];                 /* Pick up values from tables; */  
         max = rep_max[c];                 /* zero for max => infinity */  
         if (max == 0) max = INT_MAX;  
         break;  
2587    
2588          case OP_CRRANGE:      /* Set up for repetition, or handle the non-repeated case */
         case OP_CRMINRANGE:  
         minimize = (*ecode == OP_CRMINRANGE);  
         min = GET2(ecode, 1);  
         max = GET2(ecode, 3);  
         if (max == 0) max = INT_MAX;  
         ecode += 5;  
         break;  
2589    
2590          default:               /* No repeat follows */      switch (*ecode)
2591          if (!match_ref(offset, eptr, length, md, ims))        {
2592            {        case OP_CRSTAR:
2593            CHECK_PARTIAL();        case OP_CRMINSTAR:
2594            RRETURN(MATCH_NOMATCH);        case OP_CRPLUS:
2595            }        case OP_CRMINPLUS:
2596          eptr += length;        case OP_CRQUERY:
2597          continue;              /* With the main loop */        case OP_CRMINQUERY:
2598          c = *ecode++ - OP_CRSTAR;
2599          minimize = (c & 1) != 0;
2600          min = rep_min[c];                 /* Pick up values from tables; */
2601          max = rep_max[c];                 /* zero for max => infinity */
2602          if (max == 0) max = INT_MAX;
2603          break;
2604    
2605          case OP_CRRANGE:
2606          case OP_CRMINRANGE:
2607          minimize = (*ecode == OP_CRMINRANGE);
2608          min = GET2(ecode, 1);
2609          max = GET2(ecode, 3);
2610          if (max == 0) max = INT_MAX;
2611          ecode += 5;
2612          break;
2613    
2614          default:               /* No repeat follows */
2615          if ((length = match_ref(offset, eptr, length, md, caseless)) < 0)
2616            {
2617            CHECK_PARTIAL();
2618            MRRETURN(MATCH_NOMATCH);
2619          }          }
2620          eptr += length;
2621          continue;              /* With the main loop */
2622          }
2623    
2624        /* If the length of the reference is zero, just continue with the      /* Handle repeated back references. If the length of the reference is
2625        main loop. */      zero, just continue with the main loop. */
2626    
2627        if (length == 0) continue;      if (length == 0) continue;
2628    
2629        /* First, ensure the minimum number of matches are present. We get back      /* First, ensure the minimum number of matches are present. We get back
2630        the length of the reference string explicitly rather than passing the      the length of the reference string explicitly rather than passing the
2631        address of eptr, so that eptr can be a register variable. */      address of eptr, so that eptr can be a register variable. */
2632    
2633        for (i = 1; i <= min; i++)      for (i = 1; i <= min; i++)
2634          {
2635          int slength;
2636          if ((slength = match_ref(offset, eptr, length, md, caseless)) < 0)
2637          {          {
2638          if (!match_ref(offset, eptr, length, md, ims))          CHECK_PARTIAL();
2639            {          MRRETURN(MATCH_NOMATCH);
           CHECK_PARTIAL();  
           RRETURN(MATCH_NOMATCH);  
           }  
         eptr += length;  
2640          }          }
2641          eptr += slength;
2642          }
2643    
2644        /* If min = max, continue at the same level without recursion.      /* If min = max, continue at the same level without recursion.
2645        They are not both allowed to be zero. */      They are not both allowed to be zero. */
2646    
2647        if (min == max) continue;      if (min == max) continue;
2648    
2649        /* If minimizing, keep trying and advancing the pointer */      /* If minimizing, keep trying and advancing the pointer */
2650    
2651        if (minimize)      if (minimize)
2652          {
2653          for (fi = min;; fi++)
2654          {          {
2655          for (fi = min;; fi++)          int slength;
2656            RMATCH(eptr, ecode, offset_top, md, eptrb, RM14);
2657            if (rrc != MATCH_NOMATCH) RRETURN(rrc);
2658            if (fi >= max) MRRETURN(MATCH_NOMATCH);
2659            if ((slength = match_ref(offset, eptr, length, md, caseless)) < 0)
2660            {            {
2661            RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM14);            CHECK_PARTIAL();
2662            if (rrc != MATCH_NOMATCH) RRETURN(rrc);            MRRETURN(MATCH_NOMATCH);
           if (fi >= max) RRETURN(MATCH_NOMATCH);  
           if (!match_ref(offset, eptr, length, md, ims))  
             {  
             CHECK_PARTIAL();  
             RRETURN(MATCH_NOMATCH);  
             }  
           eptr += length;  
2663            }            }
2664          /* Control never gets here */          eptr += slength;
2665          }          }
2666          /* Control never gets here */
2667          }
2668    
2669        /* If maximizing, find the longest string and work backwards */      /* If maximizing, find the longest string and work backwards */
2670    
2671        else      else
2672          {
2673          pp = eptr;
2674          for (i = min; i < max; i++)
2675          {          {
2676          pp = eptr;          int slength;
2677          for (i = min; i < max; i++)          if ((slength = match_ref(offset, eptr, length, md, caseless)) < 0)
           {  
           if (!match_ref(offset, eptr, length, md, ims)) break;  
           eptr += length;  
           }  
         while (eptr >= pp)  
2678            {            {
2679            RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM15);            CHECK_PARTIAL();
2680            if (rrc != MATCH_NOMATCH) RRETURN(rrc);            break;
           eptr -= length;  
2681            }            }
2682          RRETURN(MATCH_NOMATCH);          eptr += slength;
2683          }          }
2684          while (eptr >= pp)
2685            {
2686            RMATCH(eptr, ecode, offset_top, md, eptrb, RM15);
2687            if (rrc != MATCH_NOMATCH) RRETURN(rrc);
2688            eptr -= length;
2689            }
2690          MRRETURN(MATCH_NOMATCH);
2691        }        }
2692      /* Control never gets here */      /* Control never gets here */
2693    
# Line 2096  for (;;) Line 2748  for (;;)
2748            if (eptr >= md->end_subject)            if (eptr >= md->end_subject)
2749              {              {
2750              SCHECK_PARTIAL();              SCHECK_PARTIAL();
2751              RRETURN(MATCH_NOMATCH);              MRRETURN(MATCH_NOMATCH);
2752              }              }
2753            GETCHARINC(c, eptr);            GETCHARINC(c, eptr);
2754            if (c > 255)            if (c > 255)
2755              {              {
2756              if (op == OP_CLASS) RRETURN(MATCH_NOMATCH);              if (op == OP_CLASS) MRRETURN(MATCH_NOMATCH);
2757              }              }
2758            else            else
2759              {              {
2760              if ((data[c/8] & (1 << (c&7))) == 0) RRETURN(MATCH_NOMATCH);              if ((data[c/8] & (1 << (c&7))) == 0) MRRETURN(MATCH_NOMATCH);
2761              }              }
2762            }            }
2763          }          }
# Line 2118  for (;;) Line 2770  for (;;)
2770            if (eptr >= md->end_subject)            if (eptr >= md->end_subject)
2771              {              {
2772              SCHECK_PARTIAL();              SCHECK_PARTIAL();
2773              RRETURN(MATCH_NOMATCH);              MRRETURN(MATCH_NOMATCH);
2774              }              }
2775            c = *eptr++;            c = *eptr++;
2776            if ((data[c/8] & (1 << (c&7))) == 0) RRETURN(MATCH_NOMATCH);            if ((data[c/8] & (1 << (c&7))) == 0) MRRETURN(MATCH_NOMATCH);
2777            }            }
2778          }          }
2779    
# Line 2141  for (;;) Line 2793  for (;;)
2793            {            {
2794            for (fi = min;; fi++)            for (fi = min;; fi++)
2795              {              {
2796              RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM16);              RMATCH(eptr, ecode, offset_top, md, eptrb, RM16);
2797              if (rrc != MATCH_NOMATCH) RRETURN(rrc);              if (rrc != MATCH_NOMATCH) RRETURN(rrc);
2798              if (fi >= max) RRETURN(MATCH_NOMATCH);              if (fi >= max) MRRETURN(MATCH_NOMATCH);
2799              if (eptr >= md->end_subject)              if (eptr >= md->end_subject)
2800                {                {
2801                SCHECK_PARTIAL();                SCHECK_PARTIAL();
2802                RRETURN(MATCH_NOMATCH);                MRRETURN(MATCH_NOMATCH);
2803                }                }
2804              GETCHARINC(c, eptr);              GETCHARINC(c, eptr);
2805              if (c > 255)              if (c > 255)
2806                {                {
2807                if (op == OP_CLASS) RRETURN(MATCH_NOMATCH);                if (op == OP_CLASS) MRRETURN(MATCH_NOMATCH);
2808                }                }
2809              else              else
2810                {                {
2811                if ((data[c/8] & (1 << (c&7))) == 0) RRETURN(MATCH_NOMATCH);                if ((data[c/8] & (1 << (c&7))) == 0) MRRETURN(MATCH_NOMATCH);
2812                }                }
2813              }              }
2814            }            }
# Line 2166  for (;;) Line 2818  for (;;)
2818            {            {
2819            for (fi = min;; fi++)            for (fi = min;; fi++)
2820              {              {
2821              RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM17);              RMATCH(eptr, ecode, offset_top, md, eptrb, RM17);
2822              if (rrc != MATCH_NOMATCH) RRETURN(rrc);              if (rrc != MATCH_NOMATCH) RRETURN(rrc);
2823              if (fi >= max) RRETURN(MATCH_NOMATCH);              if (fi >= max) MRRETURN(MATCH_NOMATCH);
2824              if (eptr >= md->end_subject)              if (eptr >= md->end_subject)
2825                {                {
2826                SCHECK_PARTIAL();                SCHECK_PARTIAL();
2827                RRETURN(MATCH_NOMATCH);                MRRETURN(MATCH_NOMATCH);
2828                }                }
2829              c = *eptr++;              c = *eptr++;
2830              if ((data[c/8] & (1 << (c&7))) == 0) RRETURN(MATCH_NOMATCH);              if ((data[c/8] & (1 << (c&7))) == 0) MRRETURN(MATCH_NOMATCH);
2831              }              }
2832            }            }
2833          /* Control never gets here */          /* Control never gets here */
# Line 2194  for (;;) Line 2846  for (;;)
2846            for (i = min; i < max; i++)            for (i = min; i < max; i++)
2847              {              {
2848              int len = 1;              int len = 1;
2849              if (eptr >= md->end_subject) break;              if (eptr >= md->end_subject)
2850                  {
2851                  SCHECK_PARTIAL();
2852                  break;
2853                  }
2854              GETCHARLEN(c, eptr, len);              GETCHARLEN(c, eptr, len);
2855              if (c > 255)              if (c > 255)
2856                {                {
# Line 2208  for (;;) Line 2864  for (;;)
2864              }              }
2865            for (;;)            for (;;)
2866              {              {
2867              RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM18);              RMATCH(eptr, ecode, offset_top, md, eptrb, RM18);
2868              if (rrc != MATCH_NOMATCH) RRETURN(rrc);              if (rrc != MATCH_NOMATCH) RRETURN(rrc);
2869              if (eptr-- == pp) break;        /* Stop if tried at original pos */              if (eptr-- == pp) break;        /* Stop if tried at original pos */
2870              BACKCHAR(eptr);              BACKCHAR(eptr);
# Line 2220  for (;;) Line 2876  for (;;)
2876            {            {
2877            for (i = min; i < max; i++)            for (i = min; i < max; i++)
2878              {              {
2879              if (eptr >= md->end_subject) break;              if (eptr >= md->end_subject)
2880                  {
2881                  SCHECK_PARTIAL();
2882                  break;
2883                  }
2884              c = *eptr;              c = *eptr;
2885              if ((data[c/8] & (1 << (c&7))) == 0) break;              if ((data[c/8] & (1 << (c&7))) == 0) break;
2886              eptr++;              eptr++;
2887              }              }
2888            while (eptr >= pp)            while (eptr >= pp)
2889              {              {
2890              RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM19);              RMATCH(eptr, ecode, offset_top, md, eptrb, RM19);
2891              if (rrc != MATCH_NOMATCH) RRETURN(rrc);              if (rrc != MATCH_NOMATCH) RRETURN(rrc);
2892              eptr--;              eptr--;
2893              }              }
2894            }            }
2895    
2896          RRETURN(MATCH_NOMATCH);          MRRETURN(MATCH_NOMATCH);
2897          }          }
2898        }        }
2899      /* Control never gets here */      /* Control never gets here */
# Line 2285  for (;;) Line 2945  for (;;)
2945          if (eptr >= md->end_subject)          if (eptr >= md->end_subject)
2946            {            {
2947            SCHECK_PARTIAL();            SCHECK_PARTIAL();
2948            RRETURN(MATCH_NOMATCH);            MRRETURN(MATCH_NOMATCH);
2949            }            }
2950          GETCHARINCTEST(c, eptr);          GETCHARINCTEST(c, eptr);
2951          if (!_pcre_xclass(c, data)) RRETURN(MATCH_NOMATCH);          if (!_pcre_xclass(c, data)) MRRETURN(MATCH_NOMATCH);
2952          }          }
2953    
2954        /* If max == min we can continue with the main loop without the        /* If max == min we can continue with the main loop without the
# Line 2303  for (;;) Line 2963  for (;;)
2963          {          {
2964          for (fi = min;; fi++)          for (fi = min;; fi++)
2965            {            {
2966            RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM20);            RMATCH(eptr, ecode, offset_top, md, eptrb, RM20);
2967            if (rrc != MATCH_NOMATCH) RRETURN(rrc);            if (rrc != MATCH_NOMATCH) RRETURN(rrc);
2968            if (fi >= max) RRETURN(MATCH_NOMATCH);            if (fi >= max) MRRETURN(MATCH_NOMATCH);
2969            if (eptr >= md->end_subject)            if (eptr >= md->end_subject)
2970              {              {
2971              SCHECK_PARTIAL();              SCHECK_PARTIAL();
2972              RRETURN(MATCH_NOMATCH);              MRRETURN(MATCH_NOMATCH);
2973              }              }
2974            GETCHARINCTEST(c, eptr);            GETCHARINCTEST(c, eptr);
2975            if (!_pcre_xclass(c, data)) RRETURN(MATCH_NOMATCH);            if (!_pcre_xclass(c, data)) MRRETURN(MATCH_NOMATCH);
2976            }            }
2977          /* Control never gets here */          /* Control never gets here */
2978          }          }
# Line 2325  for (;;) Line 2985  for (;;)
2985          for (i = min; i < max; i++)          for (i = min; i < max; i++)
2986            {            {
2987            int len = 1;            int len = 1;
2988            if (eptr >= md->end_subject) break;            if (eptr >= md->end_subject)
2989                {
2990                SCHECK_PARTIAL();
2991                break;
2992                }
2993            GETCHARLENTEST(c, eptr, len);            GETCHARLENTEST(c, eptr, len);
2994            if (!_pcre_xclass(c, data)) break;            if (!_pcre_xclass(c, data)) break;
2995            eptr += len;            eptr += len;
2996            }            }
2997          for(;;)          for(;;)
2998            {            {
2999            RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM21);            RMATCH(eptr, ecode, offset_top, md, eptrb, RM21);
3000            if (rrc != MATCH_NOMATCH) RRETURN(rrc);            if (rrc != MATCH_NOMATCH) RRETURN(rrc);
3001            if (eptr-- == pp) break;        /* Stop if tried at original pos */            if (eptr-- == pp) break;        /* Stop if tried at original pos */
3002            if (utf8) BACKCHAR(eptr);            if (utf8) BACKCHAR(eptr);
3003            }            }
3004          RRETURN(MATCH_NOMATCH);          MRRETURN(MATCH_NOMATCH);
3005          }          }
3006    
3007        /* Control never gets here */        /* Control never gets here */
# Line 2356  for (;;) Line 3020  for (;;)
3020        if (length > md->end_subject - eptr)        if (length > md->end_subject - eptr)
3021          {          {
3022          CHECK_PARTIAL();             /* Not SCHECK_PARTIAL() */          CHECK_PARTIAL();             /* Not SCHECK_PARTIAL() */
3023          RRETURN(MATCH_NOMATCH);          MRRETURN(MATCH_NOMATCH);
3024          }          }
3025        while (length-- > 0) if (*ecode++ != *eptr++) RRETURN(MATCH_NOMATCH);        while (length-- > 0) if (*ecode++ != *eptr++) MRRETURN(MATCH_NOMATCH);
3026        }        }
3027      else      else
3028  #endif  #endif
# Line 2368  for (;;) Line 3032  for (;;)
3032        if (md->end_subject - eptr < 1)        if (md->end_subject - eptr < 1)
3033          {          {
3034          SCHECK_PARTIAL();            /* This one can use SCHECK_PARTIAL() */          SCHECK_PARTIAL();            /* This one can use SCHECK_PARTIAL() */
3035          RRETURN(MATCH_NOMATCH);          MRRETURN(MATCH_NOMATCH);
3036          }          }
3037        if (ecode[1] != *eptr++) RRETURN(MATCH_NOMATCH);        if (ecode[1] != *eptr++) MRRETURN(MATCH_NOMATCH);
3038        ecode += 2;        ecode += 2;
3039        }        }
3040      break;      break;
3041    
3042      /* Match a single character, caselessly */      /* Match a single character, caselessly */
3043    
3044      case OP_CHARNC:      case OP_CHARI:
3045  #ifdef SUPPORT_UTF8  #ifdef SUPPORT_UTF8
3046      if (utf8)      if (utf8)
3047        {        {
# Line 2388  for (;;) Line 3052  for (;;)
3052        if (length > md->end_subject - eptr)        if (length > md->end_subject - eptr)
3053          {          {
3054          CHECK_PARTIAL();             /* Not SCHECK_PARTIAL() */          CHECK_PARTIAL();             /* Not SCHECK_PARTIAL() */
3055          RRETURN(MATCH_NOMATCH);          MRRETURN(MATCH_NOMATCH);
3056          }          }
3057    
3058        /* If the pattern character's value is < 128, we have only one byte, and        /* If the pattern character's value is < 128, we have only one byte, and
# Line 2396  for (;;) Line 3060  for (;;)
3060    
3061        if (fc < 128)        if (fc < 128)
3062          {          {
3063          if (md->lcc[*ecode++] != md->lcc[*eptr++]) RRETURN(MATCH_NOMATCH);          if (md->lcc[*ecode++] != md->lcc[*eptr++]) MRRETURN(MATCH_NOMATCH);
3064          }          }
3065    
3066        /* Otherwise we must pick up the subject character */        /* Otherwise we must pick up the subject character */
# Line 2415  for (;;) Line 3079  for (;;)
3079  #ifdef SUPPORT_UCP  #ifdef SUPPORT_UCP
3080            if (dc != UCD_OTHERCASE(fc))            if (dc != UCD_OTHERCASE(fc))
3081  #endif  #endif
3082              RRETURN(MATCH_NOMATCH);              MRRETURN(MATCH_NOMATCH);
3083            }            }
3084          }          }
3085        }        }
# Line 2427  for (;;) Line 3091  for (;;)
3091        if (md->end_subject - eptr < 1)        if (md->end_subject - eptr < 1)
3092          {          {
3093          SCHECK_PARTIAL();            /* This one can use SCHECK_PARTIAL() */          SCHECK_PARTIAL();            /* This one can use SCHECK_PARTIAL() */
3094          RRETURN(MATCH_NOMATCH);          MRRETURN(MATCH_NOMATCH);
3095          }          }
3096        if (md->lcc[ecode[1]] != md->lcc[*eptr++]) RRETURN(MATCH_NOMATCH);        if (md->lcc[ecode[1]] != md->lcc[*eptr++]) MRRETURN(MATCH_NOMATCH);
3097        ecode += 2;        ecode += 2;
3098        }        }
3099      break;      break;
# Line 2437  for (;;) Line 3101  for (;;)
3101      /* Match a single character repeatedly. */      /* Match a single character repeatedly. */
3102    
3103      case OP_EXACT:      case OP_EXACT:
3104        case OP_EXACTI:
3105      min = max = GET2(ecode, 1);      min = max = GET2(ecode, 1);
3106      ecode += 3;      ecode += 3;
3107      goto REPEATCHAR;      goto REPEATCHAR;
3108    
3109      case OP_POSUPTO:      case OP_POSUPTO:
3110        case OP_POSUPTOI:
3111      possessive = TRUE;      possessive = TRUE;
3112      /* Fall through */      /* Fall through */
3113    
3114      case OP_UPTO:      case OP_UPTO:
3115        case OP_UPTOI:
3116      case OP_MINUPTO:      case OP_MINUPTO:
3117        case OP_MINUPTOI:
3118      min = 0;      min = 0;
3119      max = GET2(ecode, 1);      max = GET2(ecode, 1);
3120      minimize = *ecode == OP_MINUPTO;      minimize = *ecode == OP_MINUPTO || *ecode == OP_MINUPTOI;
3121      ecode += 3;      ecode += 3;
3122      goto REPEATCHAR;      goto REPEATCHAR;
3123    
3124      case OP_POSSTAR:      case OP_POSSTAR:
3125        case OP_POSSTARI:
3126      possessive = TRUE;      possessive = TRUE;
3127      min = 0;      min = 0;
3128      max = INT_MAX;      max = INT_MAX;
# Line 2461  for (;;) Line 3130  for (;;)
3130      goto REPEATCHAR;      goto REPEATCHAR;
3131    
3132      case OP_POSPLUS:      case OP_POSPLUS:
3133        case OP_POSPLUSI:
3134      possessive = TRUE;      possessive = TRUE;
3135      min = 1;      min = 1;
3136      max = INT_MAX;      max = INT_MAX;
# Line 2468  for (;;) Line 3138  for (;;)
3138      goto REPEATCHAR;      goto REPEATCHAR;
3139    
3140      case OP_POSQUERY:      case OP_POSQUERY:
3141        case OP_POSQUERYI:
3142      possessive = TRUE;      possessive = TRUE;
3143      min = 0;      min = 0;
3144      max = 1;      max = 1;
# Line 2475  for (;;) Line 3146  for (;;)
3146      goto REPEATCHAR;      goto REPEATCHAR;
3147    
3148      case OP_STAR:      case OP_STAR:
3149        case OP_STARI:
3150      case OP_MINSTAR:      case OP_MINSTAR:
3151        case OP_MINSTARI:
3152      case OP_PLUS:      case OP_PLUS:
3153        case OP_PLUSI:
3154      case OP_MINPLUS:      case OP_MINPLUS:
3155        case OP_MINPLUSI:
3156      case OP_QUERY:      case OP_QUERY:
3157        case OP_QUERYI:
3158      case OP_MINQUERY:      case OP_MINQUERY:
3159      c = *ecode++ - OP_STAR;      case OP_MINQUERYI:
3160        c = *ecode++ - ((op < OP_STARI)? OP_STAR : OP_STARI);
3161      minimize = (c & 1) != 0;      minimize = (c & 1) != 0;
   
3162      min = rep_min[c];                 /* Pick up values from tables; */      min = rep_min[c];                 /* Pick up values from tables; */
3163      max = rep_max[c];                 /* zero for max => infinity */      max = rep_max[c];                 /* zero for max => infinity */
3164      if (max == 0) max = INT_MAX;      if (max == 0) max = INT_MAX;
# Line 2505  for (;;) Line 3181  for (;;)
3181          {          {
3182  #ifdef SUPPORT_UCP  #ifdef SUPPORT_UCP
3183          unsigned int othercase;          unsigned int othercase;
3184          if ((ims & PCRE_CASELESS) != 0 &&          if (op >= OP_STARI &&     /* Caseless */
3185              (othercase = UCD_OTHERCASE(fc)) != fc)              (othercase = UCD_OTHERCASE(fc)) != fc)
3186            oclength = _pcre_ord2utf8(othercase, occhars);            oclength = _pcre_ord2utf8(othercase, occhars);
3187          else oclength = 0;          else oclength = 0;
# Line 2523  for (;;) Line 3199  for (;;)
3199            else            else
3200              {              {
3201              CHECK_PARTIAL();              CHECK_PARTIAL();
3202              RRETURN(MATCH_NOMATCH);              MRRETURN(MATCH_NOMATCH);
3203              }              }
3204            }            }
3205    
# Line 2533  for (;;) Line 3209  for (;;)
3209            {            {
3210            for (fi = min;; fi++)            for (fi = min;; fi++)
3211              {              {
3212              RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM22);              RMATCH(eptr, ecode, offset_top, md, eptrb, RM22);
3213              if (rrc != MATCH_NOMATCH) RRETURN(rrc);              if (rrc != MATCH_NOMATCH) RRETURN(rrc);
3214              if (fi >= max) RRETURN(MATCH_NOMATCH);              if (fi >= max) MRRETURN(MATCH_NOMATCH);
3215              if (eptr <= md->end_subject - length &&              if (eptr <= md->end_subject - length &&
3216                memcmp(eptr, charptr, length) == 0) eptr += length;                memcmp(eptr, charptr, length) == 0) eptr += length;
3217  #ifdef SUPPORT_UCP  #ifdef SUPPORT_UCP
# Line 2546  for (;;) Line 3222  for (;;)
3222              else              else
3223                {                {
3224                CHECK_PARTIAL();                CHECK_PARTIAL();
3225                RRETURN(MATCH_NOMATCH);                MRRETURN(MATCH_NOMATCH);
3226                }                }
3227              }              }
3228            /* Control never gets here */            /* Control never gets here */
# Line 2564  for (;;) Line 3240  for (;;)
3240                       eptr <= md->end_subject - oclength &&                       eptr <= md->end_subject - oclength &&
3241                       memcmp(eptr, occhars, oclength) == 0) eptr += oclength;                       memcmp(eptr, occhars, oclength) == 0) eptr += oclength;
3242  #endif  /* SUPPORT_UCP */  #endif  /* SUPPORT_UCP */
3243              else break;              else
3244                  {
3245                  CHECK_PARTIAL();
3246                  break;
3247                  }
3248              }              }
3249    
3250            if (possessive) continue;            if (possessive) continue;
3251    
3252            for(;;)            for(;;)
3253              {              {
3254              RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM23);              RMATCH(eptr, ecode, offset_top, md, eptrb, RM23);
3255              if (rrc != MATCH_NOMATCH) RRETURN(rrc);              if (rrc != MATCH_NOMATCH) RRETURN(rrc);
3256              if (eptr == pp) { RRETURN(MATCH_NOMATCH); }              if (eptr == pp) { MRRETURN(MATCH_NOMATCH); }
3257  #ifdef SUPPORT_UCP  #ifdef SUPPORT_UCP
3258              eptr--;              eptr--;
3259              BACKCHAR(eptr);              BACKCHAR(eptr);
# Line 2608  for (;;) Line 3288  for (;;)
3288      DPRINTF(("matching %c{%d,%d} against subject %.*s\n", fc, min, max,      DPRINTF(("matching %c{%d,%d} against subject %.*s\n", fc, min, max,
3289        max, eptr));        max, eptr));
3290    
3291      if ((ims & PCRE_CASELESS) != 0)      if (op >= OP_STARI)  /* Caseless */
3292        {        {
3293        fc = md->lcc[fc];        fc = md->lcc[fc];
3294        for (i = 1; i <= min; i++)        for (i = 1; i <= min; i++)
# Line 2616  for (;;) Line 3296  for (;;)
3296          if (eptr >= md->end_subject)          if (eptr >= md->end_subject)
3297            {            {
3298            SCHECK_PARTIAL();            SCHECK_PARTIAL();
3299            RRETURN(MATCH_NOMATCH);            MRRETURN(MATCH_NOMATCH);
3300            }            }
3301          if (fc != md->lcc[*eptr++]) RRETURN(MATCH_NOMATCH);          if (fc != md->lcc[*eptr++]) MRRETURN(MATCH_NOMATCH);
3302          }          }
3303        if (min == max) continue;        if (min == max) continue;
3304        if (minimize)        if (minimize)
3305          {          {
3306          for (fi = min;; fi++)          for (fi = min;; fi++)
3307            {            {
3308            RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM24);            RMATCH(eptr, ecode, offset_top, md, eptrb, RM24);
3309            if (rrc != MATCH_NOMATCH) RRETURN(rrc);            if (rrc != MATCH_NOMATCH) RRETURN(rrc);
3310            if (fi >= max) RRETURN(MATCH_NOMATCH);            if (fi >= max) MRRETURN(MATCH_NOMATCH);
3311            if (eptr >= md->end_subject)            if (eptr >= md->end_subject)
3312              {              {
3313              SCHECK_PARTIAL();              SCHECK_PARTIAL();
3314              RRETURN(MATCH_NOMATCH);              MRRETURN(MATCH_NOMATCH);
3315              }              }
3316            if (fc != md->lcc[*eptr++]) RRETURN(MATCH_NOMATCH);            if (fc != md->lcc[*eptr++]) MRRETURN(MATCH_NOMATCH);
3317            }            }
3318          /* Control never gets here */          /* Control never gets here */
3319          }          }
# Line 2642  for (;;) Line 3322  for (;;)
3322          pp = eptr;          pp = eptr;
3323          for (i = min; i < max; i++)          for (i = min; i < max; i++)
3324            {            {
3325            if (eptr >= md->end_subject || fc != md->lcc[*eptr]) break;            if (eptr >= md->end_subject)
3326                {
3327                SCHECK_PARTIAL();
3328                break;
3329                }
3330              if (fc != md->lcc[*eptr]) break;
3331            eptr++;            eptr++;
3332            }            }
3333    
# Line 2650  for (;;) Line 3335  for (;;)
3335    
3336          while (eptr >= pp)          while (eptr >= pp)
3337            {            {
3338            RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM25);            RMATCH(eptr, ecode, offset_top, md, eptrb, RM25);
3339            eptr--;            eptr--;
3340            if (rrc != MATCH_NOMATCH) RRETURN(rrc);            if (rrc != MATCH_NOMATCH) RRETURN(rrc);
3341            }            }
3342          RRETURN(MATCH_NOMATCH);          MRRETURN(MATCH_NOMATCH);
3343          }          }
3344        /* Control never gets here */        /* Control never gets here */
3345        }        }
# Line 2668  for (;;) Line 3353  for (;;)
3353          if (eptr >= md->end_subject)          if (eptr >= md->end_subject)
3354            {            {
3355            SCHECK_PARTIAL();            SCHECK_PARTIAL();
3356            RRETURN(MATCH_NOMATCH);            MRRETURN(MATCH_NOMATCH);
3357            }            }
3358          if (fc != *eptr++) RRETURN(MATCH_NOMATCH);          if (fc != *eptr++) MRRETURN(MATCH_NOMATCH);
3359          }          }
3360    
3361        if (min == max) continue;        if (min == max) continue;
# Line 2679  for (;;) Line 3364  for (;;)
3364          {          {
3365          for (fi = min;; fi++)          for (fi = min;; fi++)
3366            {            {
3367            RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM26);            RMATCH(eptr, ecode, offset_top, md, eptrb, RM26);
3368            if (rrc != MATCH_NOMATCH) RRETURN(rrc);            if (rrc != MATCH_NOMATCH) RRETURN(rrc);
3369            if (fi >= max) RRETURN(MATCH_NOMATCH);            if (fi >= max) MRRETURN(MATCH_NOMATCH);
3370            if (eptr >= md->end_subject)            if (eptr >= md->end_subject)
3371              {              {
3372              SCHECK_PARTIAL();              SCHECK_PARTIAL();
3373              RRETURN(MATCH_NOMATCH);              MRRETURN(MATCH_NOMATCH);
3374              }              }
3375            if (fc != *eptr++) RRETURN(MATCH_NOMATCH);            if (fc != *eptr++) MRRETURN(MATCH_NOMATCH);
3376            }            }
3377          /* Control never gets here */          /* Control never gets here */
3378          }          }
# Line 2696  for (;;) Line 3381  for (;;)
3381          pp = eptr;          pp = eptr;
3382          for (i = min; i < max; i++)          for (i = min; i < max; i++)
3383            {            {
3384            if (eptr >= md->end_subject || fc != *eptr) break;            if (eptr >= md->end_subject)
3385                {
3386                SCHECK_PARTIAL();
3387                break;
3388                }
3389              if (fc != *eptr) break;
3390            eptr++;            eptr++;
3391            }            }
3392          if (possessive) continue;          if (possessive) continue;
3393    
3394          while (eptr >= pp)          while (eptr >= pp)
3395            {            {
3396            RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM27);            RMATCH(eptr, ecode, offset_top, md, eptrb, RM27);
3397            eptr--;            eptr--;
3398            if (rrc != MATCH_NOMATCH) RRETURN(rrc);            if (rrc != MATCH_NOMATCH) RRETURN(rrc);
3399            }            }
3400          RRETURN(MATCH_NOMATCH);          MRRETURN(MATCH_NOMATCH);
3401          }          }
3402        }        }
3403      /* Control never gets here */      /* Control never gets here */
# Line 2716  for (;;) Line 3406  for (;;)
3406      checking can be multibyte. */      checking can be multibyte. */
3407    
3408      case OP_NOT:      case OP_NOT:
3409        case OP_NOTI:
3410      if (eptr >= md->end_subject)      if (eptr >= md->end_subject)
3411        {        {
3412        SCHECK_PARTIAL();        SCHECK_PARTIAL();
3413        RRETURN(MATCH_NOMATCH);        MRRETURN(MATCH_NOMATCH);
3414        }        }
3415      ecode++;      ecode++;
3416      GETCHARINCTEST(c, eptr);      GETCHARINCTEST(c, eptr);
3417      if ((ims & PCRE_CASELESS) != 0)      if (op == OP_NOTI)         /* The caseless case */
3418        {        {
3419  #ifdef SUPPORT_UTF8  #ifdef SUPPORT_UTF8
3420        if (c < 256)        if (c < 256)
3421  #endif  #endif
3422        c = md->lcc[c];        c = md->lcc[c];
3423        if (md->lcc[*ecode++] == c) RRETURN(MATCH_NOMATCH);        if (md->lcc[*ecode++] == c) MRRETURN(MATCH_NOMATCH);
3424        }        }
3425      else      else    /* Caseful */
3426        {        {
3427        if (*ecode++ == c) RRETURN(MATCH_NOMATCH);        if (*ecode++ == c) MRRETURN(MATCH_NOMATCH);
3428        }        }
3429      break;      break;
3430    
# Line 2745  for (;;) Line 3436  for (;;)
3436      about... */      about... */
3437    
3438      case OP_NOTEXACT:      case OP_NOTEXACT:
3439        case OP_NOTEXACTI:
3440      min = max = GET2(ecode, 1);      min = max = GET2(ecode, 1);
3441      ecode += 3;      ecode += 3;
3442      goto REPEATNOTCHAR;      goto REPEATNOTCHAR;
3443    
3444      case OP_NOTUPTO:      case OP_NOTUPTO:
3445        case OP_NOTUPTOI:
3446      case OP_NOTMINUPTO:      case OP_NOTMINUPTO:
3447        case OP_NOTMINUPTOI:
3448      min = 0;      min = 0;
3449      max = GET2(ecode, 1);      max = GET2(ecode, 1);
3450      minimize = *ecode == OP_NOTMINUPTO;      minimize = *ecode == OP_NOTMINUPTO || *ecode == OP_NOTMINUPTOI;
3451      ecode += 3;      ecode += 3;
3452      goto REPEATNOTCHAR;      goto REPEATNOTCHAR;
3453    
3454      case OP_NOTPOSSTAR:      case OP_NOTPOSSTAR:
3455        case OP_NOTPOSSTARI:
3456      possessive = TRUE;      possessive = TRUE;
3457      min = 0;      min = 0;
3458      max = INT_MAX;      max = INT_MAX;
# Line 2765  for (;;) Line 3460  for (;;)
3460      goto REPEATNOTCHAR;      goto REPEATNOTCHAR;
3461    
3462      case OP_NOTPOSPLUS:      case OP_NOTPOSPLUS:
3463        case OP_NOTPOSPLUSI:
3464      possessive = TRUE;      possessive = TRUE;
3465      min = 1;      min = 1;
3466      max = INT_MAX;      max = INT_MAX;
# Line 2772  for (;;) Line 3468  for (;;)
3468      goto REPEATNOTCHAR;      goto REPEATNOTCHAR;
3469    
3470      case OP_NOTPOSQUERY:      case OP_NOTPOSQUERY:
3471        case OP_NOTPOSQUERYI:
3472      possessive = TRUE;      possessive = TRUE;
3473      min = 0;      min = 0;
3474      max = 1;      max = 1;
# Line 2779  for (;;) Line 3476  for (;;)
3476      goto REPEATNOTCHAR;      goto REPEATNOTCHAR;
3477    
3478      case OP_NOTPOSUPTO:      case OP_NOTPOSUPTO:
3479        case OP_NOTPOSUPTOI:
3480      possessive = TRUE;      possessive = TRUE;
3481      min = 0;      min = 0;
3482      max = GET2(ecode, 1);      max = GET2(ecode, 1);
# Line 2786  for (;;) Line 3484  for (;;)
3484      goto REPEATNOTCHAR;      goto REPEATNOTCHAR;
3485    
3486      case OP_NOTSTAR:      case OP_NOTSTAR:
3487        case OP_NOTSTARI:
3488      case OP_NOTMINSTAR:      case OP_NOTMINSTAR:
3489        case OP_NOTMINSTARI:
3490      case OP_NOTPLUS:      case OP_NOTPLUS:
3491        case OP_NOTPLUSI:
3492      case OP_NOTMINPLUS:      case OP_NOTMINPLUS:
3493        case OP_NOTMINPLUSI:
3494      case OP_NOTQUERY:      case OP_NOTQUERY:
3495        case OP_NOTQUERYI:
3496      case OP_NOTMINQUERY:      case OP_NOTMINQUERY:
3497      c = *ecode++ - OP_NOTSTAR;      case OP_NOTMINQUERYI:
3498        c = *ecode++ - ((op >= OP_NOTSTARI)? OP_NOTSTARI: OP_NOTSTAR);
3499      minimize = (c & 1) != 0;      minimize = (c & 1) != 0;
3500      min = rep_min[c];                 /* Pick up values from tables; */      min = rep_min[c];                 /* Pick up values from tables; */
3501      max = rep_max[c];                 /* zero for max => infinity */      max = rep_max[c];                 /* zero for max => infinity */
# Line 2813  for (;;) Line 3517  for (;;)
3517      DPRINTF(("negative matching %c{%d,%d} against subject %.*s\n", fc, min, max,      DPRINTF(("negative matching %c{%d,%d} against subject %.*s\n", fc, min, max,
3518        max, eptr));        max, eptr));
3519    
3520      if ((ims & PCRE_CASELESS) != 0)      if (op >= OP_NOTSTARI)     /* Caseless */
3521        {        {
3522        fc = md->lcc[fc];        fc = md->lcc[fc];
3523    
# Line 2827  for (;;) Line 3531  for (;;)
3531            if (eptr >= md->end_subject)            if (eptr >= md->end_subject)
3532              {              {
3533              SCHECK_PARTIAL();              SCHECK_PARTIAL();
3534              RRETURN(MATCH_NOMATCH);              MRRETURN(MATCH_NOMATCH);
3535              }              }
3536            GETCHARINC(d, eptr);            GETCHARINC(d, eptr);
3537            if (d < 256) d = md->lcc[d];            if (d < 256) d = md->lcc[d];
3538            if (fc == d) RRETURN(MATCH_NOMATCH);            if (fc == d) MRRETURN(MATCH_NOMATCH);
3539            }            }
3540          }          }
3541        else        else
# Line 2844  for (;;) Line 3548  for (;;)
3548            if (eptr >= md->end_subject)            if (eptr >= md->end_subject)
3549              {              {
3550              SCHECK_PARTIAL();              SCHECK_PARTIAL();
3551              RRETURN(MATCH_NOMATCH);              MRRETURN(MATCH_NOMATCH);
3552              }              }
3553            if (fc == md->lcc[*eptr++]) RRETURN(MATCH_NOMATCH);            if (fc == md->lcc[*eptr++]) MRRETURN(MATCH_NOMATCH);
3554            }            }
3555          }          }
3556    
# Line 2861  for (;;) Line 3565  for (;;)
3565            register unsigned int d;            register unsigned int d;
3566            for (fi = min;; fi++)            for (fi = min;; fi++)
3567              {              {
3568              RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM28);              RMATCH(eptr, ecode, offset_top, md, eptrb, RM28);
3569              if (rrc != MATCH_NOMATCH) RRETURN(rrc);              if (rrc != MATCH_NOMATCH) RRETURN(rrc);
3570              if (fi >= max) RRETURN(MATCH_NOMATCH);              if (fi >= max) MRRETURN(MATCH_NOMATCH);
3571              if (eptr >= md->end_subject)              if (eptr >= md->end_subject)
3572                {                {
3573                SCHECK_PARTIAL();                SCHECK_PARTIAL();
3574                RRETURN(MATCH_NOMATCH);                MRRETURN(MATCH_NOMATCH);
3575                }                }
3576              GETCHARINC(d, eptr);              GETCHARINC(d, eptr);
3577              if (d < 256) d = md->lcc[d];              if (d < 256) d = md->lcc[d];
3578              if (fc == d) RRETURN(MATCH_NOMATCH);              if (fc == d) MRRETURN(MATCH_NOMATCH);
3579              }              }
3580            }            }
3581          else          else
# Line 2880  for (;;) Line 3584  for (;;)
3584            {            {
3585            for (fi = min;; fi++)            for (fi = min;; fi++)
3586              {              {
3587              RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM29);              RMATCH(eptr, ecode, offset_top, md, eptrb, RM29);
3588              if (rrc != MATCH_NOMATCH) RRETURN(rrc);              if (rrc != MATCH_NOMATCH) RRETURN(rrc);
3589              if (fi >= max) RRETURN(MATCH_NOMATCH);              if (fi >= max) MRRETURN(MATCH_NOMATCH);
3590              if (eptr >= md->end_subject)              if (eptr >= md->end_subject)
3591                {                {
3592                SCHECK_PARTIAL();                SCHECK_PARTIAL();
3593                RRETURN(MATCH_NOMATCH);                MRRETURN(MATCH_NOMATCH);
3594                }                }
3595              if (fc == md->lcc[*eptr++]) RRETURN(MATCH_NOMATCH);              if (fc == md->lcc[*eptr++]) MRRETURN(MATCH_NOMATCH);
3596              }              }
3597            }            }
3598          /* Control never gets here */          /* Control never gets here */
# Line 2908  for (;;) Line 3612  for (;;)
3612            for (i = min; i < max; i++)            for (i = min; i < max; i++)
3613              {              {
3614              int len = 1;              int len = 1;
3615              if (eptr >= md->end_subject) break;              if (eptr >= md->end_subject)
3616                  {
3617                  SCHECK_PARTIAL();
3618                  break;
3619                  }
3620              GETCHARLEN(d, eptr, len);              GETCHARLEN(d, eptr, len);
3621              if (d < 256) d = md->lcc[d];              if (d < 256) d = md->lcc[d];
3622              if (fc == d) break;              if (fc == d) break;
# Line 2917  for (;;) Line 3625  for (;;)
3625          if (possessive) continue;          if (possessive) continue;
3626          for(;;)          for(;;)
3627              {              {
3628              RMATCH(eptr, ecode, offset_top, md, ims, eptrb, 0, RM30);              RMATCH(eptr, ecode, offset_top, md, eptrb, RM30);
3629              if (rrc != MATCH_NOMATCH) RRETURN(rrc);              if (rrc != MATCH_NOMATCH) RRETURN(rrc);
3630              if (eptr-- == pp) break;        /* Stop if tried at original pos */              if (eptr-- == pp) break;        /* Stop if tried at original pos */
3631              BACKCHAR(eptr);              BACKCHAR(eptr);
# Line 2929  for (;;) Line 3637  for (;;)
3637            {            {
3638            for (i = min; i < max; i++)            for (i = min; i < max; i++)