/[pcre]/code/trunk/pcre_compile.c

Diff of /code/trunk/pcre_compile.c

Parent Directory | Revision Log | View Patch Patch

-revision 206 by ph10,
Fri Aug  3 14:53:04 2007 UTC
+revision 723 by ph10,
Sat Oct  8 15:55:23 2011 UTC
 Line 6
  and semantics are as close as possible to those of the Perl 5 language.
                         Written by Philip Hazel
-            Copyright (c) 1997-2007 University of Cambridge
+            Copyright (c) 1997-2011 University of Cambridge
  -----------------------------------------------------------------------------
  Redistribution and use in source and binary forms, with or without
 Line 43 
 supporting internal functions that are n
  #ifdef HAVE_CONFIG_H
- #include <config.h>
+ #include "config.h"
  #endif
  #define NLBLOCK cd             /* Block containing newline information */
 Line 53 
 supporting internal functions that are n
  #include "pcre_internal.h"
- /* When DEBUG is defined, we need the pcre_printint() function, which is also
+ /* When PCRE_DEBUG is defined, we need the pcre_printint() function, which is
- used by pcretest. DEBUG is not defined when building a production library. */
+ also used by pcretest. PCRE_DEBUG is not defined when building a production
+ library. */
- #ifdef DEBUG
+ #ifdef PCRE_DEBUG
  #include "pcre_printint.src"
  #endif
-Line 91 
 is 4 there is plenty of room. */
+Line 92 
 is 4 there is plenty of room. */
  #define COMPILE_WORK_SIZE (4096)
+ /* The overrun tests check for a slightly smaller size so that they detect the
+ overrun before it actually does run off the end of the data block. */
+ #define WORK_SIZE_CHECK (COMPILE_WORK_SIZE - 100)
  /* Table for handling escaped characters in the range '0'-'z'. Positive returns
  are simple data values; negative values are for special things like \d and so
  on. Zero means further processing is needed (for things like \x), or the escape
  is invalid. */
- #ifndef EBCDIC  /* This is the "normal" table for ASCII systems */
+ #ifndef EBCDIC
+ /* This is the "normal" table for ASCII systems or for EBCDIC systems running
+ in UTF-8 mode. */
  static const short int escapes[] = {
-,      0,      0,      0,      0,      0,      0,      0,   /* 0 - 7 */
+,                       0,
-,      0,    ':',    ';',    '<',    '=',    '>',    '?',   /* 8 - ? */
+,                       0,
-    '@', -ESC_A, -ESC_B, -ESC_C, -ESC_D, -ESC_E,      0, -ESC_G,   /* @ - G */
+,                       0,
- -ESC_H,      0,      0, -ESC_K,      0,      0,      0,      0,   /* H - O */
+,                       0,
- -ESC_P, -ESC_Q, -ESC_R, -ESC_S,      0,      0, -ESC_V, -ESC_W,   /* P - W */
+,                       0,
- -ESC_X,      0, -ESC_Z,    '[',   '\\',    ']',    '^',    '_',   /* X - _ */
+      CHAR_COLON,              CHAR_SEMICOLON,
-    '`',      7, -ESC_b,      0, -ESC_d,  ESC_e,  ESC_f,      0,   /* ` - g */
+      CHAR_LESS_THAN_SIGN,     CHAR_EQUALS_SIGN,
- -ESC_h,      0,      0, -ESC_k,      0,      0,  ESC_n,      0,   /* h - o */
+      CHAR_GREATER_THAN_SIGN,  CHAR_QUESTION_MARK,
- -ESC_p,      0,  ESC_r, -ESC_s,  ESC_tee,    0, -ESC_v, -ESC_w,   /* p - w */
+      CHAR_COMMERCIAL_AT,      -ESC_A,
-,      0, -ESC_z                                            /* x - z */
+      -ESC_B,                  -ESC_C,
+      -ESC_D,                  -ESC_E,
+,                       -ESC_G,
+      -ESC_H,                  0,
+,                       -ESC_K,
+,                       0,
+      -ESC_N,                  0,
+      -ESC_P,                  -ESC_Q,
+      -ESC_R,                  -ESC_S,
+,                       0,
+      -ESC_V,                  -ESC_W,
+      -ESC_X,                  0,
+      -ESC_Z,                  CHAR_LEFT_SQUARE_BRACKET,
+      CHAR_BACKSLASH,          CHAR_RIGHT_SQUARE_BRACKET,
+      CHAR_CIRCUMFLEX_ACCENT,  CHAR_UNDERSCORE,
+      CHAR_GRAVE_ACCENT,       7,
+      -ESC_b,                  0,
+      -ESC_d,                  ESC_e,
+      ESC_f,                   0,
+      -ESC_h,                  0,
+,                       -ESC_k,
+,                       0,
+      ESC_n,                   0,
+      -ESC_p,                  0,
+      ESC_r,                   -ESC_s,
+      ESC_tee,                 0,
+      -ESC_v,                  -ESC_w,
+,                       0,
+      -ESC_z
  };
- #else           /* This is the "abnormal" table for EBCDIC systems */
+ #else
+ /* This is the "abnormal" table for EBCDIC systems without UTF-8 support. */
  static const short int escapes[] = {
  /*  48 */     0,     0,      0,     '.',    '<',   '(',    '+',    '|',
  /*  50 */   '&',     0,      0,       0,      0,     0,      0,      0,
-Line 130 
 static const short int escapes[] = {
+Line 171 
 static const short int escapes[] = {
  /*  B8 */     0,     0,      0,       0,      0,   ']',    '=',    '-',
  /*  C0 */   '{',-ESC_A, -ESC_B,  -ESC_C, -ESC_D,-ESC_E,      0, -ESC_G,
  /*  C8 */-ESC_H,     0,      0,       0,      0,     0,      0,      0,
- /*  D0 */   '}',     0, -ESC_K,       0,      0,     0,      0, -ESC_P,
+ /*  D0 */   '}',     0, -ESC_K,       0,      0,-ESC_N,      0, -ESC_P,
  /*  D8 */-ESC_Q,-ESC_R,      0,       0,      0,     0,      0,      0,
  /*  E0 */  '\\',     0, -ESC_S,       0,      0,-ESC_V, -ESC_W, -ESC_X,
  /*  E8 */     0,-ESC_Z,      0,       0,      0,     0,      0,      0,
-Line 140 
 static const short int escapes[] = {
+Line 181 
 static const short int escapes[] = {
  #endif
- /* Tables of names of POSIX character classes and their lengths. The list is
+ /* Table of special "verbs" like (*PRUNE). This is a short table, so it is
- terminated by a zero length entry. The first three must be alpha, lower, upper,
+ searched linearly. Put all the names into a single string, in order to reduce
- as this is assumed for handling case independence. */
+ the number of relocations when a shared library is dynamically linked. The
+ string is built from string macros so that it works in UTF-8 mode on EBCDIC
- static const char *const posix_names[] = {
+ platforms. */
-   "alpha", "lower", "upper",
-   "alnum", "ascii", "blank", "cntrl", "digit", "graph",
+ typedef struct verbitem {
-   "print", "punct", "space", "word",  "xdigit" };
+   int   len;                 /* Length of verb name */
+   int   op;                  /* Op when no arg, or -1 if arg mandatory */
+   int   op_arg;              /* Op when arg present, or -1 if not allowed */
+ } verbitem;
+ static const char verbnames[] =
+   "\0"                       /* Empty name is a shorthand for MARK */
+   STRING_MARK0
+   STRING_ACCEPT0
+   STRING_COMMIT0
+   STRING_F0
+   STRING_FAIL0
+   STRING_PRUNE0
+   STRING_SKIP0
+   STRING_THEN;
+ static const verbitem verbs[] = {
+   { 0, -1,        OP_MARK },
+   { 4, -1,        OP_MARK },
+   { 6, OP_ACCEPT, -1 },
+   { 6, OP_COMMIT, -1 },
+   { 1, OP_FAIL,   -1 },
+   { 4, OP_FAIL,   -1 },
+   { 5, OP_PRUNE,  OP_PRUNE_ARG },
+   { 4, OP_SKIP,   OP_SKIP_ARG  },
+   { 4, OP_THEN,   OP_THEN_ARG  }
+ };
+ static const int verbcount = sizeof(verbs)/sizeof(verbitem);
+ /* Tables of names of POSIX character classes and their lengths. The names are
+ now all in a single string, to reduce the number of relocations when a shared
+ library is dynamically loaded. The list of lengths is terminated by a zero
+ length entry. The first three must be alpha, lower, upper, as this is assumed
+ for handling case independence. */
+ static const char posix_names[] =
+   STRING_alpha0 STRING_lower0 STRING_upper0 STRING_alnum0
+   STRING_ascii0 STRING_blank0 STRING_cntrl0 STRING_digit0
+   STRING_graph0 STRING_print0 STRING_punct0 STRING_space0
+   STRING_word0  STRING_xdigit;
  static const uschar posix_name_lengths[] = {
 , 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 4, 6, 0 };
-Line 179 
 static const int posix_class_maps[] = {
+Line 261 
 static const int posix_class_maps[] = {
    cbit_xdigit,-1,          0              /* xdigit */
  };
+ /* Table of substitutes for \d etc when PCRE_UCP is set. The POSIX class
+ substitutes must be in the order of the names, defined above, and there are
+ both positive and negative cases. NULL means no substitute. */
+ #ifdef SUPPORT_UCP
+ static const uschar *substitutes[] = {
+   (uschar *)"\\P{Nd}",    /* \D */
+   (uschar *)"\\p{Nd}",    /* \d */
+   (uschar *)"\\P{Xsp}",   /* \S */       /* NOTE: Xsp is Perl space */
+   (uschar *)"\\p{Xsp}",   /* \s */
+   (uschar *)"\\P{Xwd}",   /* \W */
+   (uschar *)"\\p{Xwd}"    /* \w */
+ };
+ static const uschar *posix_substitutes[] = {
+   (uschar *)"\\p{L}",     /* alpha */
+   (uschar *)"\\p{Ll}",    /* lower */
+   (uschar *)"\\p{Lu}",    /* upper */
+   (uschar *)"\\p{Xan}",   /* alnum */
+   NULL,                   /* ascii */
+   (uschar *)"\\h",        /* blank */
+   NULL,                   /* cntrl */
+   (uschar *)"\\p{Nd}",    /* digit */
+   NULL,                   /* graph */
+   NULL,                   /* print */
+   NULL,                   /* punct */
+   (uschar *)"\\p{Xps}",   /* space */    /* NOTE: Xps is POSIX space */
+   (uschar *)"\\p{Xwd}",   /* word */
+   NULL,                   /* xdigit */
+   /* Negated cases */
+   (uschar *)"\\P{L}",     /* ^alpha */
+   (uschar *)"\\P{Ll}",    /* ^lower */
+   (uschar *)"\\P{Lu}",    /* ^upper */
+   (uschar *)"\\P{Xan}",   /* ^alnum */
+   NULL,                   /* ^ascii */
+   (uschar *)"\\H",        /* ^blank */
+   NULL,                   /* ^cntrl */
+   (uschar *)"\\P{Nd}",    /* ^digit */
+   NULL,                   /* ^graph */
+   NULL,                   /* ^print */
+   NULL,                   /* ^punct */
+   (uschar *)"\\P{Xps}",   /* ^space */   /* NOTE: Xps is POSIX space */
+   (uschar *)"\\P{Xwd}",   /* ^word */
+   NULL                    /* ^xdigit */
+ };
+ #define POSIX_SUBSIZE (sizeof(posix_substitutes)/sizeof(uschar *))
+ #endif
  #define STRING(a)  # a
  #define XSTRING(s) STRING(s)
-Line 186 
 static const int posix_class_maps[] = {
+Line 315 
 static const int posix_class_maps[] = {
  /* The texts of compile-time error messages. These are "char *" because they
  are passed to the outside world. Do not ever re-use any error number, because
  they are documented. Always add a new error instead. Messages marked DEAD below
- are no longer used. */
+ are no longer used. This used to be a table of strings, but in order to reduce
+ the number of relocations needed when a shared library is loaded dynamically,
- static const char *error_texts[] = {
+ it is now one long string. We cannot use a table of offsets, because the
-   "no error",
+ lengths of inserts such as XSTRING(MAX_NAME_SIZE) are not known. Instead, we
-   "\\ at end of pattern",
+ simply count through to the one we want - this isn't a performance issue
-   "\\c at end of pattern",
+ because these strings are used only when there is a compilation error.
-   "unrecognized character follows \\",
-   "numbers out of order in {} quantifier",
+ Each substring ends with \0 to insert a null character. This includes the final
+ substring, so that the whole string ends with \0\0, which can be detected when
+ counting through. */
+ static const char error_texts[] =
+   "no error\0"
+   "\\ at end of pattern\0"
+   "\\c at end of pattern\0"
+   "unrecognized character follows \\\0"
+   "numbers out of order in {} quantifier\0"
    /* 5 */
-   "number too big in {} quantifier",
+   "number too big in {} quantifier\0"
-   "missing terminating ] for character class",
+   "missing terminating ] for character class\0"
-   "invalid escape sequence in character class",
+   "invalid escape sequence in character class\0"
-   "range out of order in character class",
+   "range out of order in character class\0"
-   "nothing to repeat",
+   "nothing to repeat\0"
    /* 10 */
-   "operand of unlimited repeat could match the empty string",  /** DEAD **/
+   "operand of unlimited repeat could match the empty string\0"  /** DEAD **/
-   "internal error: unexpected repeat",
+   "internal error: unexpected repeat\0"
-   "unrecognized character after (?",
+   "unrecognized character after (? or (?-\0"
-   "POSIX named classes are supported only within a class",
+   "POSIX named classes are supported only within a class\0"
-   "missing )",
+   "missing )\0"
    /* 15 */
-   "reference to non-existent subpattern",
+   "reference to non-existent subpattern\0"
-   "erroffset passed as NULL",
+   "erroffset passed as NULL\0"
-   "unknown option bit(s) set",
+   "unknown option bit(s) set\0"
-   "missing ) after comment",
+   "missing ) after comment\0"
-   "parentheses nested too deeply",  /** DEAD **/
+   "parentheses nested too deeply\0"  /** DEAD **/
    /* 20 */
-   "regular expression is too large",
+   "regular expression is too large\0"
-   "failed to get memory",
+   "failed to get memory\0"
-   "unmatched parentheses",
+   "unmatched parentheses\0"
-   "internal error: code overflow",
+   "internal error: code overflow\0"
-   "unrecognized character after (?<",
+   "unrecognized character after (?<\0"
    /* 25 */
-   "lookbehind assertion is not fixed length",
+   "lookbehind assertion is not fixed length\0"
-   "malformed number or name after (?(",
+   "malformed number or name after (?(\0"
-   "conditional group contains more than two branches",
+   "conditional group contains more than two branches\0"
-   "assertion expected after (?(",
+   "assertion expected after (?(\0"
-   "(?R or (?[+-]digits must be followed by )",
+   "(?R or (?[+-]digits must be followed by )\0"
    /* 30 */
-   "unknown POSIX class name",
+   "unknown POSIX class name\0"
-   "POSIX collating elements are not supported",
+   "POSIX collating elements are not supported\0"
-   "this version of PCRE is not compiled with PCRE_UTF8 support",
+   "this version of PCRE is not compiled with PCRE_UTF8 support\0"
-   "spare error",  /** DEAD **/
+   "spare error\0"  /** DEAD **/
-   "character value in \\x{...} sequence is too large",
+   "character value in \\x{...} sequence is too large\0"
    /* 35 */
-   "invalid condition (?(0)",
+   "invalid condition (?(0)\0"
-   "\\C not allowed in lookbehind assertion",
+   "\\C not allowed in lookbehind assertion\0"
-   "PCRE does not support \\L, \\l, \\N, \\U, or \\u",
+   "PCRE does not support \\L, \\l, \\N{name}, \\U, or \\u\0"
-   "number after (?C is > 255",
+   "number after (?C is > 255\0"
-   "closing ) for (?C expected",
+   "closing ) for (?C expected\0"
    /* 40 */
-   "recursive call could loop indefinitely",
+   "recursive call could loop indefinitely\0"
-   "unrecognized character after (?P",
+   "unrecognized character after (?P\0"
-   "syntax error in subpattern name (missing terminator)",
+   "syntax error in subpattern name (missing terminator)\0"
-   "two named subpatterns have the same name",
+   "two named subpatterns have the same name\0"
-   "invalid UTF-8 string",
+   "invalid UTF-8 string\0"
    /* 45 */
-   "support for \\P, \\p, and \\X has not been compiled",
+   "support for \\P, \\p, and \\X has not been compiled\0"
-   "malformed \\P or \\p sequence",
+   "malformed \\P or \\p sequence\0"
-   "unknown property name after \\P or \\p",
+   "unknown property name after \\P or \\p\0"
-   "subpattern name is too long (maximum " XSTRING(MAX_NAME_SIZE) " characters)",
+   "subpattern name is too long (maximum " XSTRING(MAX_NAME_SIZE) " characters)\0"
-   "too many named subpatterns (maximum " XSTRING(MAX_NAME_COUNT) ")",
+   "too many named subpatterns (maximum " XSTRING(MAX_NAME_COUNT) ")\0"
    /* 50 */
-   "repeated subpattern is too long",    /** DEAD **/
+   "repeated subpattern is too long\0"    /** DEAD **/
-   "octal value is greater than \\377 (not in UTF-8 mode)",
+   "octal value is greater than \\377 (not in UTF-8 mode)\0"
-   "internal error: overran compiling workspace",
+   "internal error: overran compiling workspace\0"
-   "internal error: previously-checked referenced subpattern not found",
+   "internal error: previously-checked referenced subpattern not found\0"
-   "DEFINE group contains more than one branch",
+   "DEFINE group contains more than one branch\0"
    /* 55 */
-   "repeating a DEFINE group is not allowed",
+   "repeating a DEFINE group is not allowed\0"  /** DEAD **/
-   "inconsistent NEWLINE options",
+   "inconsistent NEWLINE options\0"
-   "\\g is not followed by a braced name or an optionally braced non-zero number",
+   "\\g is not followed by a braced, angle-bracketed, or quoted name/number or by a plain number\0"
-   "(?+ or (?- or (?(+ or (?(- must be followed by a non-zero number"
+   "a numbered reference must not be zero\0"
- };
+   "an argument is not allowed for (*ACCEPT), (*FAIL), or (*COMMIT)\0"
+   /* 60 */
+   "(*VERB) not recognized\0"
+   "number is too big\0"
+   "subpattern name expected\0"
+   "digit expected after (?+\0"
+   "] is an invalid data character in JavaScript compatibility mode\0"
+   /* 65 */
+   "different names for subpatterns of the same number are not allowed\0"
+   "(*MARK) must have an argument\0"
+   "this version of PCRE is not compiled with PCRE_UCP support\0"
+   "\\c must be followed by an ASCII character\0"
+   "\\k is not followed by a braced, angle-bracketed, or quoted name\0"
+   ;
  /* Table to identify digits and hex digits. This is used when compiling
  patterns. Note that the tables in chartables are dependent on the locale, and
-Line 278 
 For convenience, we use the same bit def
+Line 428 
 For convenience, we use the same bit def
  Then we can use ctype_digit and ctype_xdigit in the code. */
- #ifndef EBCDIC  /* This is the "normal" case, for ASCII systems */
+ #ifndef EBCDIC
+ /* This is the "normal" case, for ASCII systems, and EBCDIC systems running in
+ UTF-8 mode. */
  static const unsigned char digitab[] =
    {
 x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*   0-  7 */
-Line 314 
 static const unsigned char digitab[] =
+Line 468 
 static const unsigned char digitab[] =
 x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 240-247 */
 x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};/* 248-255 */
- #else           /* This is the "abnormal" case, for EBCDIC systems */
+ #else
+ /* This is the "abnormal" case, for EBCDIC systems not running in UTF-8 mode. */
  static const unsigned char digitab[] =
    {
 x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*   0-  7  0 */
-Line 389 
 static const unsigned char ebcdic_charta
+Line 546 
 static const unsigned char ebcdic_charta
  /* Definition to allow mutual recursion */
  static BOOL
-   compile_regex(int, int, uschar **, const uschar **, int *, BOOL, BOOL, int,
+   compile_regex(int, uschar **, const uschar **, int *, BOOL, BOOL, int, int,
      int *, int *, branch_chain *, compile_data *, int *);
  /*************************************************
+ *            Find an error text                  *
+ *************************************************/
+ /* The error texts are now all in one long string, to save on relocations. As
+ some of the text is of unknown length, we can't use a table of offsets.
+ Instead, just count through the strings. This is not a performance issue
+ because it happens only when there has been a compilation error.
+ Argument:   the error number
+ Returns:    pointer to the error string
+ */
+ static const char *
+ find_error_text(int n)
+ {
+ const char *s = error_texts;
+ for (; n > 0; n--)
+   {
+   while (*s++ != 0) {};
+   if (*s == 0) return "Error text not found (please report)";
+   }
+ return s;
+ }
+ /*************************************************
+ *            Check for counted repeat            *
+ *************************************************/
+ /* This function is called when a '{' is encountered in a place where it might
+ start a quantifier. It looks ahead to see if it really is a quantifier or not.
+ It is only a quantifier if it is one of the forms {ddd} {ddd,} or {ddd,ddd}
+ where the ddds are digits.
+ Arguments:
+   p         pointer to the first char after '{'
+ Returns:    TRUE or FALSE
+ */
+ static BOOL
+ is_counted_repeat(const uschar *p)
+ {
+ if ((digitab[*p++] & ctype_digit) == 0) return FALSE;
+ while ((digitab[*p] & ctype_digit) != 0) p++;
+ if (*p == CHAR_RIGHT_CURLY_BRACKET) return TRUE;
+ if (*p++ != CHAR_COMMA) return FALSE;
+ if (*p == CHAR_RIGHT_CURLY_BRACKET) return TRUE;
+ if ((digitab[*p++] & ctype_digit) == 0) return FALSE;
+ while ((digitab[*p] & ctype_digit) != 0) p++;
+ return (*p == CHAR_RIGHT_CURLY_BRACKET);
+ }
+ /*************************************************
  *            Handle escapes                      *
  *************************************************/
-Line 415 
 Arguments:
+Line 631 
 Arguments:
  Returns:         zero or positive => a data character
                   negative => a special escape sequence
-                  on error, errorptr is set
+                  on error, errorcodeptr is set
  */
  static int
-Line 433 
 ptr--;                            /* Set
+Line 649 
 ptr--;                            /* Set
  if (c == 0) *errorcodeptr = ERR1;
- /* Non-alphamerics are literals. For digits or letters, do an initial lookup in
+ /* Non-alphanumerics are literals. For digits or letters, do an initial lookup
- a table. A non-zero result is something that can be returned immediately.
+ in a table. A non-zero result is something that can be returned immediately.
  Otherwise further processing may be required. */
- #ifndef EBCDIC  /* ASCII coding */
+ #ifndef EBCDIC  /* ASCII/UTF-8 coding */
- else if (c < '0' || c > 'z') {}                           /* Not alphameric */
+ else if (c < CHAR_0 || c > CHAR_z) {}                     /* Not alphanumeric */
- else if ((i = escapes[c - '0']) != 0) c = i;
+ else if ((i = escapes[c - CHAR_0]) != 0) c = i;
  #else           /* EBCDIC coding */
- else if (c < 'a' || (ebcdic_chartab[c] & 0x0E) == 0) {}   /* Not alphameric */
+ else if (c < 'a' || (ebcdic_chartab[c] & 0x0E) == 0) {}   /* Not alphanumeric */
  else if ((i = escapes[c - 0x48]) != 0)  c = i;
  #endif
-Line 458 
 else
+Line 674 
 else
      /* A number of Perl escapes are not handled by PCRE. We give an explicit
      error. */
-     case 'l':
+     case CHAR_l:
-     case 'L':
+     case CHAR_L:
-     case 'N':
+     case CHAR_u:
-     case 'u':
+     case CHAR_U:
-     case 'U':
      *errorcodeptr = ERR37;
      break;
-     /* \g must be followed by a number, either plain or braced. If positive, it
+     /* In a character class, \g is just a literal "g". Outside a character
-     is an absolute backreference. If negative, it is a relative backreference.
+     class, \g must be followed by one of a number of specific things:
-     This is a Perl 5.10 feature. Perl 5.10 also supports \g{name} as a
-     reference to a named group. This is part of Perl's movement towards a
-     unified syntax for back references. As this is synonymous with \k{name}, we
-     fudge it up by pretending it really was \k. */
-     case 'g':
+     (1) A number, either plain or braced. If positive, it is an absolute
-     if (ptr[1] == '{')
+     backreference. If negative, it is a relative backreference. This is a Perl
+.10 feature.
+     (2) Perl 5.10 also supports \g{name} as a reference to a named group. This
+     is part of Perl's movement towards a unified syntax for back references. As
+     this is synonymous with \k{name}, we fudge it up by pretending it really
+     was \k.
+     (3) For Oniguruma compatibility we also support \g followed by a name or a
+     number either in angle brackets or in single quotes. However, these are
+     (possibly recursive) subroutine calls, _not_ backreferences. Just return
+     the -ESC_g code (cf \k). */
+     case CHAR_g:
+     if (isclass) break;
+     if (ptr[1] == CHAR_LESS_THAN_SIGN || ptr[1] == CHAR_APOSTROPHE)
+       {
+       c = -ESC_g;
+       break;
+       }
+     /* Handle the Perl-compatible cases */
+     if (ptr[1] == CHAR_LEFT_CURLY_BRACKET)
        {
        const uschar *p;
-       for (p = ptr+2; *p != 0 && *p != '}'; p++)
+       for (p = ptr+2; *p != 0 && *p != CHAR_RIGHT_CURLY_BRACKET; p++)
-         if (*p != '-' && (digitab[*p] & ctype_digit) == 0) break;
+         if (*p != CHAR_MINUS && (digitab[*p] & ctype_digit) == 0) break;
-       if (*p != 0 && *p != '}')
+       if (*p != 0 && *p != CHAR_RIGHT_CURLY_BRACKET)
          {
          c = -ESC_k;
          break;
-Line 489 
 else
+Line 723 
 else
        }
      else braced = FALSE;
-     if (ptr[1] == '-')
+     if (ptr[1] == CHAR_MINUS)
        {
        negated = TRUE;
        ptr++;
-Line 498 
 else
+Line 732 
 else
      c = 0;
      while ((digitab[ptr[1]] & ctype_digit) != 0)
-       c = c * 10 + *(++ptr) - '0';
+       c = c * 10 + *(++ptr) - CHAR_0;
-     if (c == 0 || (braced && *(++ptr) != '}'))
+     if (c < 0)   /* Integer overflow */
+       {
+       *errorcodeptr = ERR61;
+       break;
+       }
+     if (braced && *(++ptr) != CHAR_RIGHT_CURLY_BRACKET)
        {
        *errorcodeptr = ERR57;
-       return 0;
+       break;
+       }
+     if (c == 0)
+       {
+       *errorcodeptr = ERR58;
+       break;
        }
      if (negated)
-Line 511 
 else
+Line 757 
 else
        if (c > bracount)
          {
          *errorcodeptr = ERR15;
-         return 0;
+         break;
          }
        c = bracount - (c - 1);
        }
-Line 531 
 else
+Line 777 
 else
      value is greater than 377, the least significant 8 bits are taken. Inside a
      character class, \ followed by a digit is always an octal number. */
-     case '1': case '2': case '3': case '4': case '5':
+     case CHAR_1: case CHAR_2: case CHAR_3: case CHAR_4: case CHAR_5:
-     case '6': case '7': case '8': case '9':
+     case CHAR_6: case CHAR_7: case CHAR_8: case CHAR_9:
      if (!isclass)
        {
        oldptr = ptr;
-       c -= '0';
+       c -= CHAR_0;
        while ((digitab[ptr[1]] & ctype_digit) != 0)
-         c = c * 10 + *(++ptr) - '0';
+         c = c * 10 + *(++ptr) - CHAR_0;
+       if (c < 0)    /* Integer overflow */
+         {
+         *errorcodeptr = ERR61;
+         break;
+         }
        if (c < 10 || c <= bracount)
          {
          c = -(ESC_REF + c);
-Line 552 
 else
+Line 803 
 else
      generates a binary zero byte and treats the digit as a following literal.
      Thus we have to pull back the pointer by one. */
-     if ((c = *ptr) >= '8')
+     if ((c = *ptr) >= CHAR_8)
        {
        ptr--;
        c = 0;
-Line 565 
 else
+Line 816 
 else
      to do). Nowadays we allow for larger numbers in UTF-8 mode, but no more
      than 3 octal digits. */
-     case '0':
+     case CHAR_0:
-     c -= '0';
+     c -= CHAR_0;
-     while(i++ < 2 && ptr[1] >= '0' && ptr[1] <= '7')
+     while(i++ < 2 && ptr[1] >= CHAR_0 && ptr[1] <= CHAR_7)
-         c = c * 8 + *(++ptr) - '0';
+         c = c * 8 + *(++ptr) - CHAR_0;
      if (!utf8 && c > 255) *errorcodeptr = ERR51;
      break;
-Line 576 
 else
+Line 827 
 else
      than 0xff in utf8 mode, but only if the ddd are hex digits. If not, { is
      treated as a data character. */
-     case 'x':
+     case CHAR_x:
-     if (ptr[1] == '{')
+     if (ptr[1] == CHAR_LEFT_CURLY_BRACKET)
        {
        const uschar *pt = ptr + 2;
        int count = 0;
-Line 586 
 else
+Line 837 
 else
        while ((digitab[*pt] & ctype_xdigit) != 0)
          {
          register int cc = *pt++;
-         if (c == 0 && cc == '0') continue;     /* Leading zeroes */
+         if (c == 0 && cc == CHAR_0) continue;     /* Leading zeroes */
          count++;
- #ifndef EBCDIC  /* ASCII coding */
+ #ifndef EBCDIC  /* ASCII/UTF-8 coding */
-         if (cc >= 'a') cc -= 32;               /* Convert to upper case */
+         if (cc >= CHAR_a) cc -= 32;               /* Convert to upper case */
-         c = (c << 4) + cc - ((cc < 'A')? '0' : ('A' - 10));
+         c = (c << 4) + cc - ((cc < CHAR_A)? CHAR_0 : (CHAR_A - 10));
  #else           /* EBCDIC coding */
-         if (cc >= 'a' && cc <= 'z') cc += 64;  /* Convert to upper case */
+         if (cc >= CHAR_a && cc <= CHAR_z) cc += 64;  /* Convert to upper case */
-         c = (c << 4) + cc - ((cc >= '0')? '0' : ('A' - 10));
+         c = (c << 4) + cc - ((cc >= CHAR_0)? CHAR_0 : (CHAR_A - 10));
  #endif
          }
-       if (*pt == '}')
+       if (*pt == CHAR_RIGHT_CURLY_BRACKET)
          {
          if (c < 0 || count > (utf8? 8 : 2)) *errorcodeptr = ERR34;
          ptr = pt;
-Line 614 
 else
+Line 865 
 else
      c = 0;
      while (i++ < 2 && (digitab[ptr[1]] & ctype_xdigit) != 0)
        {
-       int cc;                               /* Some compilers don't like ++ */
+       int cc;                                  /* Some compilers don't like */
-       cc = *(++ptr);                        /* in initializers */
+       cc = *(++ptr);                           /* ++ in initializers */
- #ifndef EBCDIC  /* ASCII coding */
+ #ifndef EBCDIC  /* ASCII/UTF-8 coding */
-       if (cc >= 'a') cc -= 32;              /* Convert to upper case */
+       if (cc >= CHAR_a) cc -= 32;              /* Convert to upper case */
-       c = c * 16 + cc - ((cc < 'A')? '0' : ('A' - 10));
+       c = c * 16 + cc - ((cc < CHAR_A)? CHAR_0 : (CHAR_A - 10));
  #else           /* EBCDIC coding */
-       if (cc <= 'z') cc += 64;              /* Convert to upper case */
+       if (cc <= CHAR_z) cc += 64;              /* Convert to upper case */
-       c = c * 16 + cc - ((cc >= '0')? '0' : ('A' - 10));
+       c = c * 16 + cc - ((cc >= CHAR_0)? CHAR_0 : (CHAR_A - 10));
  #endif
        }
      break;
      /* For \c, a following letter is upper-cased; then the 0x40 bit is flipped.
-     This coding is ASCII-specific, but then the whole concept of \cx is
+     An error is given if the byte following \c is not an ASCII character. This
+     coding is ASCII-specific, but then the whole concept of \cx is
      ASCII-specific. (However, an EBCDIC equivalent has now been added.) */
-     case 'c':
+     case CHAR_c:
      c = *(++ptr);
      if (c == 0)
        {
        *errorcodeptr = ERR2;
-       return 0;
+       break;
        }
+ #ifndef EBCDIC    /* ASCII/UTF-8 coding */
- #ifndef EBCDIC  /* ASCII coding */
+     if (c > 127)  /* Excludes all non-ASCII in either mode */
-     if (c >= 'a' && c <= 'z') c -= 32;
+       {
+       *errorcodeptr = ERR68;
+       break;
+       }
+     if (c >= CHAR_a && c <= CHAR_z) c -= 32;
      c ^= 0x40;
- #else           /* EBCDIC coding */
+ #else             /* EBCDIC coding */
-     if (c >= 'a' && c <= 'z') c += 64;
+     if (c >= CHAR_a && c <= CHAR_z) c += 64;
      c ^= 0xC0;
  #endif
      break;
      /* PCRE_EXTRA enables extensions to Perl in the matter of escapes. Any
-     other alphameric following \ is an error if PCRE_EXTRA was set; otherwise,
+     other alphanumeric following \ is an error if PCRE_EXTRA was set;
-     for Perl compatibility, it is a literal. This code looks a bit odd, but
+     otherwise, for Perl compatibility, it is a literal. This code looks a bit
-     there used to be some cases other than the default, and there may be again
+     odd, but there used to be some cases other than the default, and there may
-     in future, so I haven't "optimized" it. */
+     be again in future, so I haven't "optimized" it. */
      default:
      if ((options & PCRE_EXTRA) != 0) switch(c)
-Line 664 
 else
+Line 920 
 else
      }
    }
+ /* Perl supports \N{name} for character names, as well as plain \N for "not
+ newline". PCRE does not support \N{name}. However, it does support
+ quantification such as \N{2,3}. */
+ if (c == -ESC_N && ptr[1] == CHAR_LEFT_CURLY_BRACKET &&
+      !is_counted_repeat(ptr+2))
+   *errorcodeptr = ERR37;
+ /* If PCRE_UCP is set, we change the values for \d etc. */
+ if ((options & PCRE_UCP) != 0 && c <= -ESC_D && c >= -ESC_w)
+   c -= (ESC_DU - ESC_D);
+ /* Set the pointer to the final character before returning. */
  *ptrptr = ptr;
  return c;
  }
-Line 704 
 if (c == 0) goto ERROR_RETURN;
+Line 975 
 if (c == 0) goto ERROR_RETURN;
  /* \P or \p can be followed by a name in {}, optionally preceded by ^ for
  negation. */
- if (c == '{')
+ if (c == CHAR_LEFT_CURLY_BRACKET)
    {
-   if (ptr[1] == '^')
+   if (ptr[1] == CHAR_CIRCUMFLEX_ACCENT)
      {
      *negptr = TRUE;
      ptr++;
-Line 715 
 if (c == '{')
+Line 986 
 if (c == '{')
      {
      c = *(++ptr);
      if (c == 0) goto ERROR_RETURN;
-     if (c == '}') break;
+     if (c == CHAR_RIGHT_CURLY_BRACKET) break;
      name[i] = c;
      }
-   if (c !='}') goto ERROR_RETURN;
+   if (c != CHAR_RIGHT_CURLY_BRACKET) goto ERROR_RETURN;
    name[i] = 0;
    }
-Line 740 
 top = _pcre_utt_size;
+Line 1011 
 top = _pcre_utt_size;
  while (bot < top)
    {
    i = (bot + top) >> 1;
-   c = strcmp(name, _pcre_utt[i].name);
+   c = strcmp(name, _pcre_utt_names + _pcre_utt[i].name_offset);
    if (c == 0)
      {
      *dptr = _pcre_utt[i].value;
-Line 764 
 return -1;
+Line 1035 
 return -1;
  /*************************************************
- *            Check for counted repeat            *
- *************************************************/
- /* This function is called when a '{' is encountered in a place where it might
- start a quantifier. It looks ahead to see if it really is a quantifier or not.
- It is only a quantifier if it is one of the forms {ddd} {ddd,} or {ddd,ddd}
- where the ddds are digits.
- Arguments:
-   p         pointer to the first char after '{'
- Returns:    TRUE or FALSE
- */
- static BOOL
- is_counted_repeat(const uschar *p)
- {
- if ((digitab[*p++] & ctype_digit) == 0) return FALSE;
- while ((digitab[*p] & ctype_digit) != 0) p++;
- if (*p == '}') return TRUE;
- if (*p++ != ',') return FALSE;
- if (*p == '}') return TRUE;
- if ((digitab[*p++] & ctype_digit) == 0) return FALSE;
- while ((digitab[*p] & ctype_digit) != 0) p++;
- return (*p == '}');
- }
- /*************************************************
  *         Read repeat counts                     *
  *************************************************/
-Line 824 
 int max = -1;
+Line 1062 
 int max = -1;
  /* Read the minimum value and do a paranoid check: a negative value indicates
  an integer overflow. */
- while ((digitab[*p] & ctype_digit) != 0) min = min * 10 + *p++ - '0';
+ while ((digitab[*p] & ctype_digit) != 0) min = min * 10 + *p++ - CHAR_0;
  if (min < 0 || min > 65535)
    {
    *errorcodeptr = ERR5;
-Line 834 
 if (min < 0 || min > 65535)
+Line 1072 
 if (min < 0 || min > 65535)
  /* Read the maximum value if there is one, and again do a paranoid on its size.
  Also, max must not be less than min. */
- if (*p == '}') max = min; else
+ if (*p == CHAR_RIGHT_CURLY_BRACKET) max = min; else
    {
-   if (*(++p) != '}')
+   if (*(++p) != CHAR_RIGHT_CURLY_BRACKET)
      {
      max = 0;
-     while((digitab[*p] & ctype_digit) != 0) max = max * 10 + *p++ - '0';
+     while((digitab[*p] & ctype_digit) != 0) max = max * 10 + *p++ - CHAR_0;
      if (max < 0 || max > 65535)
        {
        *errorcodeptr = ERR5;
-Line 864 
 return p;
+Line 1102 
 return p;
  /*************************************************
- *       Find forward referenced subpattern       *
+ *  Subroutine for finding forward reference      *
  *************************************************/
- /* This function scans along a pattern's text looking for capturing
+ /* This recursive function is called only from find_parens() below. The
+ top-level call starts at the beginning of the pattern. All other calls must
+ start at a parenthesis. It scans along a pattern's text looking for capturing
  subpatterns, and counting them. If it finds a named pattern that matches the
  name it is given, it returns its number. Alternatively, if the name is NULL, it
- returns when it reaches a given numbered subpattern. This is used for forward
+ returns when it reaches a given numbered subpattern. Recursion is used to keep
- references to subpatterns. We know that if (?P< is encountered, the name will
+ track of subpatterns that reset the capturing group numbers - the (?| feature.
- be terminated by '>' because that is checked in the first pass.
+ This function was originally called only from the second pass, in which we know
+ that if (?< or (?' or (?P< is encountered, the name will be correctly
+ terminated because that is checked in the first pass. There is now one call to
+ this function in the first pass, to check for a recursive back reference by
+ name (so that we can make the whole group atomic). In this case, we need check
+ only up to the current position in the pattern, and that is still OK because
+ and previous occurrences will have been checked. To make this work, the test
+ for "end of pattern" is a check against cd->end_pattern in the main loop,
+ instead of looking for a binary zero. This means that the special first-pass
+ call can adjust cd->end_pattern temporarily. (Checks for binary zero while
+ processing items within the loop are OK, because afterwards the main loop will
+ terminate.)
  Arguments:
-   ptr          current position in the pattern
+   ptrptr       address of the current character pointer (updated)
-   count        current count of capturing parens so far encountered
+   cd           compile background data
    name         name to seek, or NULL if seeking a numbered subpattern
    lorn         name length, or subpattern number if name is NULL
    xmode        TRUE if we are in /x mode
+   utf8         TRUE if we are in UTF-8 mode
+   count        pointer to the current capturing subpattern number (updated)
  Returns:       the number of the named subpattern, or -1 if not found
  */
  static int
- find_parens(const uschar *ptr, int count, const uschar *name, int lorn,
+ find_parens_sub(uschar **ptrptr, compile_data *cd, const uschar *name, int lorn,
-   BOOL xmode)
+   BOOL xmode, BOOL utf8, int *count)
  {
- const uschar *thisname;
+ uschar *ptr = *ptrptr;
+ int start_count = *count;
+ int hwm_count = start_count;
+ BOOL dup_parens = FALSE;
- for (; *ptr != 0; ptr++)
+ /* If the first character is a parenthesis, check on the type of group we are
+ dealing with. The very first call may not start with a parenthesis. */
+ if (ptr[0] == CHAR_LEFT_PARENTHESIS)
    {
-   int term;
+   /* Handle specials such as (*SKIP) or (*UTF8) etc. */
+   if (ptr[1] == CHAR_ASTERISK) ptr += 2;
+   /* Handle a normal, unnamed capturing parenthesis. */
+   else if (ptr[1] != CHAR_QUESTION_MARK)
+     {
+     *count += 1;
+     if (name == NULL && *count == lorn) return *count;
+     ptr++;
+     }
+   /* All cases now have (? at the start. Remember when we are in a group
+   where the parenthesis numbers are duplicated. */
+   else if (ptr[2] == CHAR_VERTICAL_LINE)
+     {
+     ptr += 3;
+     dup_parens = TRUE;
+     }
+   /* Handle comments; all characters are allowed until a ket is reached. */
+   else if (ptr[2] == CHAR_NUMBER_SIGN)
+     {
+     for (ptr += 3; *ptr != 0; ptr++) if (*ptr == CHAR_RIGHT_PARENTHESIS) break;
+     goto FAIL_EXIT;
+     }
+   /* Handle a condition. If it is an assertion, just carry on so that it
+   is processed as normal. If not, skip to the closing parenthesis of the
+   condition (there can't be any nested parens). */
+   else if (ptr[2] == CHAR_LEFT_PARENTHESIS)
+     {
+     ptr += 2;
+     if (ptr[1] != CHAR_QUESTION_MARK)
+       {
+       while (*ptr != 0 && *ptr != CHAR_RIGHT_PARENTHESIS) ptr++;
+       if (*ptr != 0) ptr++;
+       }
+     }
+   /* Start with (? but not a condition. */
+   else
+     {
+     ptr += 2;
+     if (*ptr == CHAR_P) ptr++;                      /* Allow optional P */
+     /* We have to disambiguate (?<! and (?<= from (?<name> for named groups */
+     if ((*ptr == CHAR_LESS_THAN_SIGN && ptr[1] != CHAR_EXCLAMATION_MARK &&
+         ptr[1] != CHAR_EQUALS_SIGN) || *ptr == CHAR_APOSTROPHE)
+       {
+       int term;
+       const uschar *thisname;
+       *count += 1;
+       if (name == NULL && *count == lorn) return *count;
+       term = *ptr++;
+       if (term == CHAR_LESS_THAN_SIGN) term = CHAR_GREATER_THAN_SIGN;
+       thisname = ptr;
+       while (*ptr != term) ptr++;
+       if (name != NULL && lorn == ptr - thisname &&
+           strncmp((const char *)name, (const char *)thisname, lorn) == 0)
+         return *count;
+       term++;
+       }
+     }
+   }
+ /* Past any initial parenthesis handling, scan for parentheses or vertical
+ bars. Stop if we get to cd->end_pattern. Note that this is important for the
+ first-pass call when this value is temporarily adjusted to stop at the current
+ position. So DO NOT change this to a test for binary zero. */
+ for (; ptr < cd->end_pattern; ptr++)
+   {
    /* Skip over backslashed characters and also entire \Q...\E */
-   if (*ptr == '\\')
+   if (*ptr == CHAR_BACKSLASH)
      {
-     if (*(++ptr) == 0) return -1;
+     if (*(++ptr) == 0) goto FAIL_EXIT;
-     if (*ptr == 'Q') for (;;)
+     if (*ptr == CHAR_Q) for (;;)
        {
-       while (*(++ptr) != 0 && *ptr != '\\');
+       while (*(++ptr) != 0 && *ptr != CHAR_BACKSLASH) {};
-       if (*ptr == 0) return -1;
+       if (*ptr == 0) goto FAIL_EXIT;
-       if (*(++ptr) == 'E') break;
+       if (*(++ptr) == CHAR_E) break;
        }
      continue;
      }
-   /* Skip over character classes */
+   /* Skip over character classes; this logic must be similar to the way they
+   are handled for real. If the first character is '^', skip it. Also, if the
+   first few characters (either before or after ^) are \Q\E or \E we skip them
+   too. This makes for compatibility with Perl. Note the use of STR macros to
+   encode "Q\\E" so that it works in UTF-8 on EBCDIC platforms. */
-   if (*ptr == '[')
+   if (*ptr == CHAR_LEFT_SQUARE_BRACKET)
      {
-     while (*(++ptr) != ']')
+     BOOL negate_class = FALSE;
+     for (;;)
        {
-       if (*ptr == '\\')
+       if (ptr[1] == CHAR_BACKSLASH)
          {
-         if (*(++ptr) == 0) return -1;
+         if (ptr[2] == CHAR_E)
-         if (*ptr == 'Q') for (;;)
+           ptr+= 2;
+         else if (strncmp((const char *)ptr+2,
+                  STR_Q STR_BACKSLASH STR_E, 3) == 0)
+           ptr += 4;
+         else
+           break;
+         }
+       else if (!negate_class && ptr[1] == CHAR_CIRCUMFLEX_ACCENT)
+         {
+         negate_class = TRUE;
+         ptr++;
+         }
+       else break;
+       }
+     /* If the next character is ']', it is a data character that must be
+     skipped, except in JavaScript compatibility mode. */
+     if (ptr[1] == CHAR_RIGHT_SQUARE_BRACKET &&
+         (cd->external_options & PCRE_JAVASCRIPT_COMPAT) == 0)
+       ptr++;
+     while (*(++ptr) != CHAR_RIGHT_SQUARE_BRACKET)
+       {
+       if (*ptr == 0) return -1;
+       if (*ptr == CHAR_BACKSLASH)
+         {
+         if (*(++ptr) == 0) goto FAIL_EXIT;
+         if (*ptr == CHAR_Q) for (;;)
            {
-           while (*(++ptr) != 0 && *ptr != '\\');
+           while (*(++ptr) != 0 && *ptr != CHAR_BACKSLASH) {};
-           if (*ptr == 0) return -1;
+           if (*ptr == 0) goto FAIL_EXIT;
-           if (*(++ptr) == 'E') break;
+           if (*(++ptr) == CHAR_E) break;
            }
          continue;
          }
-Line 931 
 for (; *ptr != 0; ptr++)
+Line 1301 
 for (; *ptr != 0; ptr++)
    /* Skip comments in /x mode */
-   if (xmode && *ptr == '#')
+   if (xmode && *ptr == CHAR_NUMBER_SIGN)
      {
-     while (*(++ptr) != 0 && *ptr != '\n');
+     ptr++;
-     if (*ptr == 0) return -1;
+     while (*ptr != 0)
+       {
+       if (IS_NEWLINE(ptr)) { ptr += cd->nllen - 1; break; }
+       ptr++;
+ #ifdef SUPPORT_UTF8
+       if (utf8) while ((*ptr & 0xc0) == 0x80) ptr++;
+ #endif
+       }
+     if (*ptr == 0) goto FAIL_EXIT;
      continue;
      }
-   /* An opening parens must now be a real metacharacter */
+   /* Check for the special metacharacters */
-   if (*ptr != '(') continue;
+   if (*ptr == CHAR_LEFT_PARENTHESIS)
-   if (ptr[1] != '?')
      {
-     count++;
+     int rc = find_parens_sub(&ptr, cd, name, lorn, xmode, utf8, count);
-     if (name == NULL && count == lorn) return count;
+     if (rc > 0) return rc;
-     continue;
+     if (*ptr == 0) goto FAIL_EXIT;
      }
-   ptr += 2;
+   else if (*ptr == CHAR_RIGHT_PARENTHESIS)
-   if (*ptr == 'P') ptr++;                      /* Allow optional P */
+     {
+     if (dup_parens && *count < hwm_count) *count = hwm_count;
+     goto FAIL_EXIT;
+     }
-   /* We have to disambiguate (?<! and (?<= from (?<name> */
+   else if (*ptr == CHAR_VERTICAL_LINE && dup_parens)
+     {
+     if (*count > hwm_count) hwm_count = *count;
+     *count = start_count;
+     }
+   }
-   if ((*ptr != '<' || ptr[1] == '!' || ptr[1] == '=') &&
+ FAIL_EXIT:
-        *ptr != '\'')
+ *ptrptr = ptr;
-     continue;
+ return -1;
+ }
+ /*************************************************
+ *       Find forward referenced subpattern       *
+ *************************************************/
+ /* This function scans along a pattern's text looking for capturing
+ subpatterns, and counting them. If it finds a named pattern that matches the
+ name it is given, it returns its number. Alternatively, if the name is NULL, it
+ returns when it reaches a given numbered subpattern. This is used for forward
+ references to subpatterns. We used to be able to start this scan from the
+ current compiling point, using the current count value from cd->bracount, and
+ do it all in a single loop, but the addition of the possibility of duplicate
+ subpattern numbers means that we have to scan from the very start, in order to
+ take account of such duplicates, and to use a recursive function to keep track
+ of the different types of group.
+ Arguments:
+   cd           compile background data
+   name         name to seek, or NULL if seeking a numbered subpattern
+   lorn         name length, or subpattern number if name is NULL
+   xmode        TRUE if we are in /x mode
+   utf8         TRUE if we are in UTF-8 mode
+ Returns:       the number of the found subpattern, or -1 if not found
+ */
-   count++;
+ static int
+ find_parens(compile_data *cd, const uschar *name, int lorn, BOOL xmode,
+   BOOL utf8)
+ {
+ uschar *ptr = (uschar *)cd->start_pattern;
+ int count = 0;
+ int rc;
+ /* If the pattern does not start with an opening parenthesis, the first call
+ to find_parens_sub() will scan right to the end (if necessary). However, if it
+ does start with a parenthesis, find_parens_sub() will return when it hits the
+ matching closing parens. That is why we have to have a loop. */
-   if (name == NULL && count == lorn) return count;
+ for (;;)
-   term = *ptr++;
+   {
-   if (term == '<') term = '>';
+   rc = find_parens_sub(&ptr, cd, name, lorn, xmode, utf8, &count);
-   thisname = ptr;
+   if (rc > 0 || *ptr++ == 0) break;
-   while (*ptr != term) ptr++;
-   if (name != NULL && lorn == ptr - thisname &&
-       strncmp((const char *)name, (const char *)thisname, lorn) == 0)
-     return count;
    }
- return -1;
+ return rc;
  }
  /*************************************************
  *      Find first significant op code            *
  *************************************************/
  /* This is called by several functions that scan a compiled expression looking
  for a fixed first character, or an anchoring op code etc. It skips over things
- that do not influence this. For some calls, a change of option is important.
+ that do not influence this. For some calls, it makes sense to skip negative
- For some calls, it makes sense to skip negative forward and all backward
+ forward and all backward assertions, and also the \b assertion; for others it
- assertions, and also the \b assertion; for others it does not.
+ does not.
  Arguments:
    code         pointer to the start of the group
-   options      pointer to external options
-   optbit       the option bit whose changing is significant, or
-                  zero if none are
    skipassert   TRUE if certain assertions are to be skipped
  Returns:       pointer to the first significant opcode
  */
  static const uschar*
- first_significant_code(const uschar *code, int *options, int optbit,
+ first_significant_code(const uschar *code, BOOL skipassert)
-   BOOL skipassert)
  {
  for (;;)
    {
    switch ((int)*code)
      {
-     case OP_OPT:
-     if (optbit > 0 && ((int)code[1] & optbit) != (*options & optbit))
-       *options = (int)code[1];
-     code += 2;
-     break;
      case OP_ASSERT_NOT:
      case OP_ASSERTBACK:
      case OP_ASSERTBACK_NOT:
-Line 1023 
 for (;;)
+Line 1435 
 for (;;)
      case OP_CALLOUT:
      case OP_CREF:
+     case OP_NCREF:
      case OP_RREF:
+     case OP_NRREF:
      case OP_DEF:
      code += _pcre_OP_lengths[*code];
      break;
-Line 1039 
 for (;;)
+Line 1453 
 for (;;)
  /*************************************************
- *        Find the fixed length of a pattern      *
+ *        Find the fixed length of a branch       *
  *************************************************/
- /* Scan a pattern and compute the fixed length of subject that will match it,
+ /* Scan a branch and compute the fixed length of subject that will match it,
  if the length is fixed. This is needed for dealing with backward assertions.
- In UTF8 mode, the result is in characters rather than bytes.
+ In UTF8 mode, the result is in characters rather than bytes. The branch is
+ temporarily terminated with OP_END when this function is called.
+ This function is called when a backward assertion is encountered, so that if it
+ fails, the error message can point to the correct place in the pattern.
+ However, we cannot do this when the assertion contains subroutine calls,
+ because they can be forward references. We solve this by remembering this case
+ and doing the check at the end; a flag specifies which mode we are running in.
  Arguments:
    code     points to the start of the pattern (the bracket)
-   options  the compiling options
+   utf8     TRUE in UTF-8 mode
+   atend    TRUE if called when the pattern is complete
+   cd       the "compile data" structure
- Returns:   the fixed length, or -1 if there is no fixed length,
+ Returns:   the fixed length,
+              or -1 if there is no fixed length,
               or -2 if \C was encountered
+              or -3 if an OP_RECURSE item was encountered and atend is FALSE
  */
  static int
- find_fixedlength(uschar *code, int options)
+ find_fixedlength(uschar *code, BOOL utf8, BOOL atend, compile_data *cd)
  {
  int length = -1;
-Line 1068 
 branch, check the length against that of
+Line 1493 
 branch, check the length against that of
  for (;;)
    {
    int d;
+   uschar *ce, *cs;
    register int op = *cc;
    switch (op)
      {
+     /* We only need to continue for OP_CBRA (normal capturing bracket) and
+     OP_BRA (normal non-capturing bracket) because the other variants of these
+     opcodes are all concerned with unlimited repeated groups, which of course
+     are not of fixed length. They will cause a -1 response from the default
+     case of this switch. */
      case OP_CBRA:
      case OP_BRA:
      case OP_ONCE:
+     case OP_ONCE_NC:
      case OP_COND:
-     d = find_fixedlength(cc + ((op == OP_CBRA)? 2:0), options);
+     d = find_fixedlength(cc + ((op == OP_CBRA)? 2:0), utf8, atend, cd);
      if (d < 0) return d;
      branchlength += d;
      do cc += GET(cc, 1); while (*cc == OP_ALT);
-Line 1085 
 for (;;)
+Line 1517 
 for (;;)
      /* Reached end of a branch; if it's a ket it is the end of a nested
      call. If it's ALT it is an alternation in a nested call. If it is
-     END it's the end of the outer call. All can be handled by the same code. */
+     END it's the end of the outer call. All can be handled by the same code.
+     Note that we must not include the OP_KETRxxx opcodes here, because they
+     all imply an unlimited repeat. */
      case OP_ALT:
      case OP_KET:
-     case OP_KETRMAX:
-     case OP_KETRMIN:
      case OP_END:
      if (length < 0) length = branchlength;
        else if (length != branchlength) return -1;
-Line 1099 
 for (;;)
+Line 1531 
 for (;;)
      branchlength = 0;
      break;
+     /* A true recursion implies not fixed length, but a subroutine call may
+     be OK. If the subroutine is a forward reference, we can't deal with
+     it until the end of the pattern, so return -3. */
+     case OP_RECURSE:
+     if (!atend) return -3;
+     cs = ce = (uschar *)cd->start_code + GET(cc, 1);  /* Start subpattern */
+     do ce += GET(ce, 1); while (*ce == OP_ALT);       /* End subpattern */
+     if (cc > cs && cc < ce) return -1;                /* Recursion */
+     d = find_fixedlength(cs + 2, utf8, atend, cd);
+     if (d < 0) return d;
+     branchlength += d;
+     cc += 1 + LINK_SIZE;
+     break;
      /* Skip over assertive subpatterns */
      case OP_ASSERT:
-Line 1112 
 for (;;)
+Line 1559 
 for (;;)
      case OP_REVERSE:
      case OP_CREF:
+     case OP_NCREF:
      case OP_RREF:
+     case OP_NRREF:
      case OP_DEF:
-     case OP_OPT:
      case OP_CALLOUT:
      case OP_SOD:
      case OP_SOM:
+     case OP_SET_SOM:
      case OP_EOD:
      case OP_EODN:
      case OP_CIRC:
+     case OP_CIRCM:
      case OP_DOLL:
+     case OP_DOLLM:
      case OP_NOT_WORD_BOUNDARY:
      case OP_WORD_BOUNDARY:
      cc += _pcre_OP_lengths[*cc];
-Line 1130 
 for (;;)
+Line 1581 
 for (;;)
      /* Handle literal characters */
      case OP_CHAR:
-     case OP_CHARNC:
+     case OP_CHARI:
      case OP_NOT:
+     case OP_NOTI:
      branchlength++;
      cc += 2;
  #ifdef SUPPORT_UTF8
-     if ((options & PCRE_UTF8) != 0)
+     if (utf8 && cc[-1] >= 0xc0) cc += _pcre_utf8_table4[cc[-1] & 0x3f];
-       {
-       while ((*cc & 0xc0) == 0x80) cc++;
-       }
  #endif
      break;
-Line 1149 
 for (;;)
+Line 1598 
 for (;;)
      branchlength += GET2(cc,1);
      cc += 4;
  #ifdef SUPPORT_UTF8
-     if ((options & PCRE_UTF8) != 0)
+     if (utf8 && cc[-1] >= 0xc0) cc += _pcre_utf8_table4[cc[-1] & 0x3f];
-       {
-       while((*cc & 0x80) == 0x80) cc++;
-       }
  #endif
      break;
      case OP_TYPEEXACT:
      branchlength += GET2(cc,1);
+     if (cc[3] == OP_PROP || cc[3] == OP_NOTPROP) cc += 2;
      cc += 4;
      break;
-Line 1175 
 for (;;)
+Line 1622 
 for (;;)
      case OP_NOT_WORDCHAR:
      case OP_WORDCHAR:
      case OP_ANY:
+     case OP_ALLANY:
      branchlength++;
      cc++;
      break;
-Line 1229 
 for (;;)
+Line 1677 
 for (;;)
  /*************************************************
- *    Scan compiled regex for numbered bracket    *
+ *    Scan compiled regex for specific bracket    *
  *************************************************/
  /* This little function scans through a compiled pattern until it finds a
- capturing bracket with the given number.
+ capturing bracket with the given number, or, if the number is negative, an
+ instance of OP_REVERSE for a lookbehind. The function is global in the C sense
+ so that it can be called from pcre_study() when finding the minimum matching
+ length.
  Arguments:
    code        points to start of expression
    utf8        TRUE in UTF-8 mode
-   number      the required bracket number
+   number      the required bracket number or negative to find a lookbehind
  Returns:      pointer to the opcode for the bracket, or NULL if not found
  */
- static const uschar *
+ const uschar *
- find_bracket(const uschar *code, BOOL utf8, int number)
+ _pcre_find_bracket(const uschar *code, BOOL utf8, int number)
  {
  for (;;)
    {
    register int c = *code;
    if (c == OP_END) return NULL;
    /* XCLASS is used for classes that cannot be represented just by a bit
-Line 1257 
 for (;;)
+Line 1709 
 for (;;)
    if (c == OP_XCLASS) code += GET(code, 1);
+   /* Handle recursion */
+   else if (c == OP_REVERSE)
+     {
+     if (number < 0) return (uschar *)code;
+     code += _pcre_OP_lengths[c];
+     }
    /* Handle capturing bracket */
-   else if (c == OP_CBRA)
+   else if (c == OP_CBRA || c == OP_SCBRA ||
+            c == OP_CBRAPOS || c == OP_SCBRAPOS)
      {
      int n = GET2(code, 1+LINK_SIZE);
      if (n == number) return (uschar *)code;
      code += _pcre_OP_lengths[c];
      }
-   /* In UTF-8 mode, opcodes that are followed by a character may be followed by
+   /* Otherwise, we can get the item's length from the table, except that for
-   a multi-byte character. The length in the table is a minimum, so we have to
+   repeated character types, we have to test for \p and \P, which have an extra
-   arrange to skip the extra bytes. */
+   two bytes of parameters, and for MARK/PRUNE/SKIP/THEN with an argument, we
+   must add in its length. */
    else
      {
+     switch(c)
+       {
+       case OP_TYPESTAR:
+       case OP_TYPEMINSTAR:
+       case OP_TYPEPLUS:
+       case OP_TYPEMINPLUS:
+       case OP_TYPEQUERY:
+       case OP_TYPEMINQUERY:
+       case OP_TYPEPOSSTAR:
+       case OP_TYPEPOSPLUS:
+       case OP_TYPEPOSQUERY:
+       if (code[1] == OP_PROP || code[1] == OP_NOTPROP) code += 2;
+       break;
+       case OP_TYPEUPTO:
+       case OP_TYPEMINUPTO:
+       case OP_TYPEEXACT:
+       case OP_TYPEPOSUPTO:
+       if (code[3] == OP_PROP || code[3] == OP_NOTPROP) code += 2;
+       break;
+       case OP_MARK:
+       case OP_PRUNE_ARG:
+       case OP_SKIP_ARG:
+       code += code[1];
+       break;
+       case OP_THEN_ARG:
+       code += code[1];
+       break;
+       }
+     /* Add in the fixed length from the table */
      code += _pcre_OP_lengths[c];
+   /* In UTF-8 mode, opcodes that are followed by a character may be followed by
+   a multi-byte character. The length in the table is a minimum, so we have to
+   arrange to skip the extra bytes. */
  #ifdef SUPPORT_UTF8
      if (utf8) switch(c)
        {
        case OP_CHAR:
-       case OP_CHARNC:
+       case OP_CHARI:
        case OP_EXACT:
+       case OP_EXACTI:
        case OP_UPTO:
+       case OP_UPTOI:
        case OP_MINUPTO:
+       case OP_MINUPTOI:
        case OP_POSUPTO:
+       case OP_POSUPTOI:
        case OP_STAR:
+       case OP_STARI:
        case OP_MINSTAR:
+       case OP_MINSTARI:
        case OP_POSSTAR:
+       case OP_POSSTARI:
        case OP_PLUS:
+       case OP_PLUSI:
        case OP_MINPLUS:
+       case OP_MINPLUSI:
        case OP_POSPLUS:
+       case OP_POSPLUSI:
        case OP_QUERY:
+       case OP_QUERYI:
        case OP_MINQUERY:
+       case OP_MINQUERYI:
        case OP_POSQUERY:
+       case OP_POSQUERYI:
        if (code[-1] >= 0xc0) code += _pcre_utf8_table4[code[-1] & 0x3f];
        break;
        }
+ #else
+     (void)(utf8);  /* Keep compiler happy by referencing function argument */
  #endif
      }
    }
-Line 1330 
 for (;;)
+Line 1846 
 for (;;)
    if (c == OP_XCLASS) code += GET(code, 1);
-   /* Otherwise, we get the item's length from the table. In UTF-8 mode, opcodes
+   /* Otherwise, we can get the item's length from the table, except that for
-   that are followed by a character may be followed by a multi-byte character.
+   repeated character types, we have to test for \p and \P, which have an extra
-   The length in the table is a minimum, so we have to arrange to skip the extra
+   two bytes of parameters, and for MARK/PRUNE/SKIP/THEN with an argument, we
-   bytes. */
+   must add in its length. */
    else
      {
+     switch(c)
+       {
+       case OP_TYPESTAR:
+       case OP_TYPEMINSTAR:
+       case OP_TYPEPLUS:
+       case OP_TYPEMINPLUS:
+       case OP_TYPEQUERY:
+       case OP_TYPEMINQUERY:
+       case OP_TYPEPOSSTAR:
+       case OP_TYPEPOSPLUS:
+       case OP_TYPEPOSQUERY:
+       if (code[1] == OP_PROP || code[1] == OP_NOTPROP) code += 2;
+       break;
+       case OP_TYPEPOSUPTO:
+       case OP_TYPEUPTO:
+       case OP_TYPEMINUPTO:
+       case OP_TYPEEXACT:
+       if (code[3] == OP_PROP || code[3] == OP_NOTPROP) code += 2;
+       break;
+       case OP_MARK:
+       case OP_PRUNE_ARG:
+       case OP_SKIP_ARG:
+       code += code[1];
+       break;
+       case OP_THEN_ARG:
+       code += code[1];
+       break;
+       }
+     /* Add in the fixed length from the table */
      code += _pcre_OP_lengths[c];
+     /* In UTF-8 mode, opcodes that are followed by a character may be followed
+     by a multi-byte character. The length in the table is a minimum, so we have
+     to arrange to skip the extra bytes. */
  #ifdef SUPPORT_UTF8
      if (utf8) switch(c)
        {
        case OP_CHAR:
-       case OP_CHARNC:
+       case OP_CHARI:
        case OP_EXACT:
+       case OP_EXACTI:
        case OP_UPTO:
+       case OP_UPTOI:
        case OP_MINUPTO:
+       case OP_MINUPTOI:
        case OP_POSUPTO:
+       case OP_POSUPTOI:
        case OP_STAR:
+       case OP_STARI:
        case OP_MINSTAR:
+       case OP_MINSTARI:
        case OP_POSSTAR:
+       case OP_POSSTARI:
        case OP_PLUS:
+       case OP_PLUSI:
        case OP_MINPLUS:
+       case OP_MINPLUSI:
        case OP_POSPLUS:
+       case OP_POSPLUSI:
        case OP_QUERY:
+       case OP_QUERYI:
        case OP_MINQUERY:
+       case OP_MINQUERYI:
        case OP_POSQUERY:
+       case OP_POSQUERYI:
        if (code[-1] >= 0xc0) code += _pcre_utf8_table4[code[-1] & 0x3f];
        break;
        }
+ #else
+     (void)(utf8);  /* Keep compiler happy by referencing function argument */
  #endif
      }
    }
-Line 1374 
 for (;;)
+Line 1944 
 for (;;)
  can match the empty string or not. It is called from could_be_empty()
  below and from compile_branch() when checking for an unlimited repeat of a
  group that can match nothing. Note that first_significant_code() skips over
- assertions. If we hit an unclosed bracket, we return "empty" - this means we've
+ backward and negative forward assertions when its final argument is TRUE. If we
- struck an inner bracket whose current branch will already have been scanned.
+ hit an unclosed bracket, we return "empty" - this means we've struck an inner
+ bracket whose current branch will already have been scanned.
+ Arguments:
+   code        points to start of search
+   endcode     points to where to stop
+   utf8        TRUE if in UTF8 mode
+   cd          contains pointers to tables etc.
+ Returns:      TRUE if what is matched could be empty
+ */
+ static BOOL
+ could_be_empty_branch(const uschar *code, const uschar *endcode, BOOL utf8,
+   compile_data *cd)
+ {
+ register int c;
+ for (code = first_significant_code(code + _pcre_OP_lengths[*code], TRUE);
+      code < endcode;
+      code = first_significant_code(code + _pcre_OP_lengths[c], TRUE))
+   {
+   const uschar *ccode;
+   c = *code;
+   /* Skip over forward assertions; the other assertions are skipped by
+   first_significant_code() with a TRUE final argument. */
+   if (c == OP_ASSERT)
+     {
+     do code += GET(code, 1); while (*code == OP_ALT);
+     c = *code;
+     continue;
+     }
+   /* For a recursion/subroutine call, if its end has been reached, which
+   implies a backward reference subroutine call, we can scan it. If it's a
+   forward reference subroutine call, we can't. To detect forward reference
+   we have to scan up the list that is kept in the workspace. This function is
+   called only when doing the real compile, not during the pre-compile that
+   measures the size of the compiled pattern. */
+   if (c == OP_RECURSE)
+     {
+     const uschar *scode;
+     BOOL empty_branch;
- Arguments:
+     /* Test for forward reference */
-   code        points to start of search
-   endcode     points to where to stop
-   utf8        TRUE if in UTF8 mode
- Returns:      TRUE if what is matched could be empty
+     for (scode = cd->start_workspace; scode < cd->hwm; scode += LINK_SIZE)
- */
+       if (GET(scode, 0) == code + 1 - cd->start_code) return TRUE;
- static BOOL
+     /* Not a forward reference, test for completed backward reference */
- could_be_empty_branch(const uschar *code, const uschar *endcode, BOOL utf8)
- {
- register int c;
- for (code = first_significant_code(code + _pcre_OP_lengths[*code], NULL, 0, TRUE);
-      code < endcode;
-      code = first_significant_code(code + _pcre_OP_lengths[c], NULL, 0, TRUE))
-   {
-   const uschar *ccode;
-   c = *code;
+     empty_branch = FALSE;
+     scode = cd->start_code + GET(code, 1);
+     if (GET(scode, 1) == 0) return TRUE;    /* Unclosed */
+     /* Completed backwards reference */
+     do
+       {
+       if (could_be_empty_branch(scode, endcode, utf8, cd))
+         {
+         empty_branch = TRUE;
+         break;
+         }
+       scode += GET(scode, 1);
+       }
+     while (*scode == OP_ALT);
+     if (!empty_branch) return FALSE;  /* All branches are non-empty */
+     continue;
+     }
    /* Groups with zero repeats can of course be empty; skip them. */
-   if (c == OP_BRAZERO || c == OP_BRAMINZERO)
+   if (c == OP_BRAZERO || c == OP_BRAMINZERO || c == OP_SKIPZERO ||
+       c == OP_BRAPOSZERO)
      {
      code += _pcre_OP_lengths[c];
      do code += GET(code, 1); while (*code == OP_ALT);
-Line 1407 
 for (code = first_significant_code(code
+Line 2031 
 for (code = first_significant_code(code
      continue;
      }
+   /* A nested group that is already marked as "could be empty" can just be
+   skipped. */
+   if (c == OP_SBRA  || c == OP_SBRAPOS ||
+       c == OP_SCBRA || c == OP_SCBRAPOS)
+     {
+     do code += GET(code, 1); while (*code == OP_ALT);
+     c = *code;
+     continue;
+     }
    /* For other groups, scan the branches. */
-   if (c == OP_BRA || c == OP_CBRA || c == OP_ONCE || c == OP_COND)
+   if (c == OP_BRA  || c == OP_BRAPOS ||
+       c == OP_CBRA || c == OP_CBRAPOS ||
+       c == OP_ONCE || c == OP_ONCE_NC ||
+       c == OP_COND)
      {
      BOOL empty_branch;
      if (GET(code, 1) == 0) return TRUE;    /* Hit unclosed bracket */
-     /* Scan a closed bracket */
+     /* If a conditional group has only one branch, there is a second, implied,
+     empty branch, so just skip over the conditional, because it could be empty.
+     Otherwise, scan the individual branches of the group. */
-     empty_branch = FALSE;
+     if (c == OP_COND && code[GET(code, 1)] != OP_ALT)
-     do
-       {
-       if (!empty_branch && could_be_empty_branch(code, endcode, utf8))
-         empty_branch = TRUE;
        code += GET(code, 1);
+     else
+       {
+       empty_branch = FALSE;
+       do
+         {
+         if (!empty_branch && could_be_empty_branch(code, endcode, utf8, cd))
+           empty_branch = TRUE;
+         code += GET(code, 1);
+         }
+       while (*code == OP_ALT);
+       if (!empty_branch) return FALSE;   /* All branches are non-empty */
        }
-     while (*code == OP_ALT);
-     if (!empty_branch) return FALSE;   /* All branches are non-empty */
      c = *code;
      continue;
      }
-Line 1433 
 for (code = first_significant_code(code
+Line 2079 
 for (code = first_significant_code(code
    switch (c)
      {
-     /* Check for quantifiers after a class */
+     /* Check for quantifiers after a class. XCLASS is used for classes that
+     cannot be represented just by a bit map. This includes negated single
+     high-valued characters. The length in _pcre_OP_lengths[] is zero; the
+     actual length is stored in the compiled code, so we must update "code"
+     here. */
  #ifdef SUPPORT_UTF8
      case OP_XCLASS:
-     ccode = code + GET(code, 1);
+     ccode = code += GET(code, 1);
      goto CHECK_CLASS_REPEAT;
  #endif
-Line 1481 
 for (code = first_significant_code(code
+Line 2131 
 for (code = first_significant_code(code
      case OP_NOT_WORDCHAR:
      case OP_WORDCHAR:
      case OP_ANY:
+     case OP_ALLANY:
      case OP_ANYBYTE:
      case OP_CHAR:
-     case OP_CHARNC:
+     case OP_CHARI:
      case OP_NOT:
+     case OP_NOTI:
      case OP_PLUS:
      case OP_MINPLUS:
      case OP_POSPLUS:
-Line 1499 
 for (code = first_significant_code(code
+Line 2151 
 for (code = first_significant_code(code
      case OP_TYPEEXACT:
      return FALSE;
+     /* These are going to continue, as they may be empty, but we have to
+     fudge the length for the \p and \P cases. */
+     case OP_TYPESTAR:
+     case OP_TYPEMINSTAR:
+     case OP_TYPEPOSSTAR:
+     case OP_TYPEQUERY:
+     case OP_TYPEMINQUERY:
+     case OP_TYPEPOSQUERY:
+     if (code[1] == OP_PROP || code[1] == OP_NOTPROP) code += 2;
+     break;
+     /* Same for these */
+     case OP_TYPEUPTO:
+     case OP_TYPEMINUPTO:
+     case OP_TYPEPOSUPTO:
+     if (code[3] == OP_PROP || code[3] == OP_NOTPROP) code += 2;
+     break;
      /* End of branch */
      case OP_KET:
      case OP_KETRMAX:
      case OP_KETRMIN:
+     case OP_KETRPOS:
      case OP_ALT:
      return TRUE;
-Line 1512 
 for (code = first_significant_code(code
+Line 2185 
 for (code = first_significant_code(code
  #ifdef SUPPORT_UTF8
      case OP_STAR:
+     case OP_STARI:
      case OP_MINSTAR:
+     case OP_MINSTARI:
      case OP_POSSTAR:
+     case OP_POSSTARI:
      case OP_QUERY:
+     case OP_QUERYI:
      case OP_MINQUERY:
+     case OP_MINQUERYI:
      case OP_POSQUERY:
+     case OP_POSQUERYI:
+     if (utf8 && code[1] >= 0xc0) code += _pcre_utf8_table4[code[1] & 0x3f];
+     break;
      case OP_UPTO:
+     case OP_UPTOI:
      case OP_MINUPTO:
+     case OP_MINUPTOI:
      case OP_POSUPTO:
-     if (utf8) while ((code[2] & 0xc0) == 0x80) code++;
+     case OP_POSUPTOI:
+     if (utf8 && code[3] >= 0xc0) code += _pcre_utf8_table4[code[3] & 0x3f];
      break;
  #endif
+     /* MARK, and PRUNE/SKIP/THEN with an argument must skip over the argument
+     string. */
+     case OP_MARK:
+     case OP_PRUNE_ARG:
+     case OP_SKIP_ARG:
+     code += code[1];
+     break;
+     case OP_THEN_ARG:
+     code += code[1];
+     break;
+     /* None of the remaining opcodes are required to match a character. */
+     default:
+     break;
      }
    }
-Line 1539 
 return TRUE;
+Line 2242 
 return TRUE;
  the current branch of the current pattern to see if it could match the empty
  string. If it could, we must look outwards for branches at other levels,
  stopping when we pass beyond the bracket which is the subject of the recursion.
+ This function is called only during the real compile, not during the
+ pre-compile.
  Arguments:
    code        points to start of the recursion
    endcode     points to where to stop (current RECURSE item)
    bcptr       points to the chain of current (unclosed) branch starts
    utf8        TRUE if in UTF-8 mode
+   cd          pointers to tables etc
  Returns:      TRUE if what is matched could be empty
  */
  static BOOL
  could_be_empty(const uschar *code, const uschar *endcode, branch_chain *bcptr,
-   BOOL utf8)
+   BOOL utf8, compile_data *cd)
  {
- while (bcptr != NULL && bcptr->current >= code)
+ while (bcptr != NULL && bcptr->current_branch >= code)
    {
-   if (!could_be_empty_branch(bcptr->current, endcode, utf8)) return FALSE;
+   if (!could_be_empty_branch(bcptr->current_branch, endcode, utf8, cd))
+     return FALSE;
    bcptr = bcptr->outer;
    }
  return TRUE;
-Line 1568 
 return TRUE;
+Line 2275 
 return TRUE;
  *************************************************/
  /* This function is called when the sequence "[:" or "[." or "[=" is
- encountered in a character class. It checks whether this is followed by an
+ encountered in a character class. It checks whether this is followed by a
- optional ^ and then a sequence of letters, terminated by a matching ":]" or
+ sequence of characters terminated by a matching ":]" or ".]" or "=]". If we
- ".]" or "=]".
+ reach an unescaped ']' without the special preceding character, return FALSE.
+ Originally, this function only recognized a sequence of letters between the
+ terminators, but it seems that Perl recognizes any sequence of characters,
+ though of course unknown POSIX names are subsequently rejected. Perl gives an
+ "Unknown POSIX class" error for [:f\oo:] for example, where previously PCRE
+ didn't consider this to be a POSIX class. Likewise for [:1234:].
+ The problem in trying to be exactly like Perl is in the handling of escapes. We
+ have to be sure that [abc[:x\]pqr] is *not* treated as containing a POSIX
+ class, but [abc[:x\]pqr:]] is (so that an error can be generated). The code
+ below handles the special case of \], but does not try to do any other escape
+ processing. This makes it different from Perl for cases such as [:l\ower:]
+ where Perl recognizes it as the POSIX class "lower" but PCRE does not recognize
+ "l\ower". This is a lesser evil that not diagnosing bad classes when Perl does,
+ I think.
+ A user pointed out that PCRE was rejecting [:a[:digit:]] whereas Perl was not.
+ It seems that the appearance of a nested POSIX class supersedes an apparent
+ external class. For example, [:a[:digit:]b:] matches "a", "b", ":", or
+ a digit.
+ In Perl, unescaped square brackets may also appear as part of class names. For
+ example, [:a[:abc]b:] gives unknown POSIX class "[:abc]b:]". However, for
+ [:a[:abc]b][b:] it gives unknown POSIX class "[:abc]b][b:]", which does not
+ seem right at all. PCRE does not allow closing square brackets in POSIX class
+ names.
- Argument:
+ Arguments:
    ptr      pointer to the initial [
    endptr   where to return the end pointer
-   cd       pointer to compile data
  Returns:   TRUE or FALSE
  */
  static BOOL
- check_posix_syntax(const uschar *ptr, const uschar **endptr, compile_data *cd)
+ check_posix_syntax(const uschar *ptr, const uschar **endptr)
  {
  int terminator;          /* Don't combine these lines; the Solaris cc */
  terminator = *(++ptr);   /* compiler warns about "non-constant" initializer. */
- if (*(++ptr) == '^') ptr++;
+ for (++ptr; *ptr != 0; ptr++)
- while ((cd->ctypes[*ptr] & ctype_letter) != 0) ptr++;
- if (*ptr == terminator && ptr[1] == ']')
    {
-   *endptr = ptr;
+   if (*ptr == CHAR_BACKSLASH && ptr[1] == CHAR_RIGHT_SQUARE_BRACKET)
-   return TRUE;
+     ptr++;
+   else if (*ptr == CHAR_RIGHT_SQUARE_BRACKET) return FALSE;
+   else
+     {
+     if (*ptr == terminator && ptr[1] == CHAR_RIGHT_SQUARE_BRACKET)
+       {
+       *endptr = ptr;
+       return TRUE;
+       }
+     if (*ptr == CHAR_LEFT_SQUARE_BRACKET &&
+          (ptr[1] == CHAR_COLON || ptr[1] == CHAR_DOT ||
+           ptr[1] == CHAR_EQUALS_SIGN) &&
+         check_posix_syntax(ptr, endptr))
+       return FALSE;
+     }
    }
  return FALSE;
  }
-Line 1615 
 Returns:     a value representing the na
+Line 2359 
 Returns:     a value representing the na
  static int
  check_posix_name(const uschar *ptr, int len)
  {
+ const char *pn = posix_names;
  register int yield = 0;
  while (posix_name_lengths[yield] != 0)
    {
    if (len == posix_name_lengths[yield] &&
-     strncmp((const char *)ptr, posix_names[yield], len) == 0) return yield;
+     strncmp((const char *)ptr, pn, len) == 0) return yield;
+   pn += posix_name_lengths[yield] + 1;
    yield++;
    }
  return -1;
-Line 1634 
 return -1;
+Line 2380 
 return -1;
  that is referenced. This means that groups can be replicated for fixed
  repetition simply by copying (because the recursion is allowed to refer to
  earlier groups that are outside the current group). However, when a group is
- optional (i.e. the minimum quantifier is zero), OP_BRAZERO is inserted before
+ optional (i.e. the minimum quantifier is zero), OP_BRAZERO or OP_SKIPZERO is
- it, after it has been compiled. This means that any OP_RECURSE items within it
+ inserted before it, after it has been compiled. This means that any OP_RECURSE
- that refer to the group itself or any contained groups have to have their
+ items within it that refer to the group itself or any contained groups have to
- offsets adjusted. That one of the jobs of this function. Before it is called,
+ have their offsets adjusted. That one of the jobs of this function. Before it
- the partially compiled regex must be temporarily terminated with OP_END.
+ is called, the partially compiled regex must be temporarily terminated with
+ OP_END.
  This function has been extended with the possibility of forward references for
  recursions and subroutine calls. It must also check the list of such references
-Line 1661 
 adjust_recurse(uschar *group, int adjust
+Line 2408 
 adjust_recurse(uschar *group, int adjust
    uschar *save_hwm)
  {
  uschar *ptr = group;
  while ((ptr = (uschar *)find_recurse(ptr, utf8)) != NULL)
    {
    int offset;
-Line 1714 
 auto_callout(uschar *code, const uschar
+Line 2462 
 auto_callout(uschar *code, const uschar
  {
  *code++ = OP_CALLOUT;
  *code++ = 255;
- PUT(code, 0, ptr - cd->start_pattern);  /* Pattern offset */
+ PUT(code, 0, (int)(ptr - cd->start_pattern));  /* Pattern offset */
- PUT(code, LINK_SIZE, 0);                /* Default length */
+ PUT(code, LINK_SIZE, 0);                       /* Default length */
  return code + 2*LINK_SIZE;
  }
-Line 1740 
 Returns:             nothing
+Line 2488 
 Returns:             nothing
  static void
  complete_callout(uschar *previous_callout, const uschar *ptr, compile_data *cd)
  {
- int length = ptr - cd->start_pattern - GET(previous_callout, 2);
+ int length = (int)(ptr - cd->start_pattern - GET(previous_callout, 2));
  PUT(previous_callout, 2 + LINK_SIZE, length);
  }
-Line 1772 
 get_othercase_range(unsigned int *cptr,
+Line 2520 
 get_othercase_range(unsigned int *cptr,
  unsigned int c, othercase, next;
  for (c = *cptr; c <= d; c++)
-   { if ((othercase = _pcre_ucp_othercase(c)) != NOTACHAR) break; }
+   { if ((othercase = UCD_OTHERCASE(c)) != c) break; }
  if (c > d) return FALSE;
-Line 1781 
 next = othercase + 1;
+Line 2529 
 next = othercase + 1;
  for (++c; c <= d; c++)
    {
-   if (_pcre_ucp_othercase(c) != next) break;
+   if (UCD_OTHERCASE(c) != next) break;
    next++;
    }
-Line 1790 
 for (++c; c <= d; c++)
+Line 2538 
 for (++c; c <= d; c++)
  return TRUE;
  }
+ /*************************************************
+ *        Check a character and a property        *
+ *************************************************/
+ /* This function is called by check_auto_possessive() when a property item
+ is adjacent to a fixed character.
+ Arguments:
+   c            the character
+   ptype        the property type
+   pdata        the data for the type
+   negated      TRUE if it's a negated property (\P or \p{^)
+ Returns:       TRUE if auto-possessifying is OK
+ */
+ static BOOL
+ check_char_prop(int c, int ptype, int pdata, BOOL negated)
+ {
+ const ucd_record *prop = GET_UCD(c);
+ switch(ptype)
+   {
+   case PT_LAMP:
+   return (prop->chartype == ucp_Lu ||
+           prop->chartype == ucp_Ll ||
+           prop->chartype == ucp_Lt) == negated;
+   case PT_GC:
+   return (pdata == _pcre_ucp_gentype[prop->chartype]) == negated;
+   case PT_PC:
+   return (pdata == prop->chartype) == negated;
+   case PT_SC:
+   return (pdata == prop->script) == negated;
+   /* These are specials */
+   case PT_ALNUM:
+   return (_pcre_ucp_gentype[prop->chartype] == ucp_L ||
+           _pcre_ucp_gentype[prop->chartype] == ucp_N) == negated;
+   case PT_SPACE:    /* Perl space */
+   return (_pcre_ucp_gentype[prop->chartype] == ucp_Z ||
+           c == CHAR_HT || c == CHAR_NL || c == CHAR_FF || c == CHAR_CR)
+           == negated;
+   case PT_PXSPACE:  /* POSIX space */
+   return (_pcre_ucp_gentype[prop->chartype] == ucp_Z ||
+           c == CHAR_HT || c == CHAR_NL || c == CHAR_VT ||
+           c == CHAR_FF || c == CHAR_CR)
+           == negated;
+   case PT_WORD:
+   return (_pcre_ucp_gentype[prop->chartype] == ucp_L ||
+           _pcre_ucp_gentype[prop->chartype] == ucp_N ||
+           c == CHAR_UNDERSCORE) == negated;
+   }
+ return FALSE;
+ }
  #endif  /* SUPPORT_UCP */
-Line 1803 
 whether the next thing could possibly ma
+Line 2614 
 whether the next thing could possibly ma
  sense to automatically possessify the repeated item.
  Arguments:
-   op_code       the repeated op code
+   previous      pointer to the repeated opcode
-   this          data for this item, depends on the opcode
    utf8          TRUE in UTF-8 mode
-   utf8_char     used for utf8 character bytes, NULL if not relevant
    ptr           next character in pattern
    options       options bits
    cd            contains pointers to tables etc.
-Line 1815 
 Returns:        TRUE if possessifying is
+Line 2624 
 Returns:        TRUE if possessifying is
  */
  static BOOL
- check_auto_possessive(int op_code, int item, BOOL utf8, uschar *utf8_char,
+ check_auto_possessive(const uschar *previous, BOOL utf8, const uschar *ptr,
-   const uschar *ptr, int options, compile_data *cd)
+   int options, compile_data *cd)
  {
- int next;
+ int c, next;
+ int op_code = *previous++;
  /* Skip whitespace and comments in extended mode */
-Line 1827 
 if ((options & PCRE_EXTENDED) != 0)
+Line 2637 
 if ((options & PCRE_EXTENDED) != 0)
    for (;;)
      {
      while ((cd->ctypes[*ptr] & ctype_space) != 0) ptr++;
-     if (*ptr == '#')
+     if (*ptr == CHAR_NUMBER_SIGN)
        {
-       while (*(++ptr) != 0)
+       ptr++;
+       while (*ptr != 0)
+         {
          if (IS_NEWLINE(ptr)) { ptr += cd->nllen; break; }
+         ptr++;
+ #ifdef SUPPORT_UTF8
+         if (utf8) while ((*ptr & 0xc0) == 0x80) ptr++;
+ #endif
+         }
        }
      else break;
      }
-Line 1839 
 if ((options & PCRE_EXTENDED) != 0)
+Line 2656 
 if ((options & PCRE_EXTENDED) != 0)
  /* If the next item is one that we can handle, get its value. A non-negative
  value is a character, a negative value is an escape value. */
- if (*ptr == '\\')
+ if (*ptr == CHAR_BACKSLASH)
    {
    int temperrorcode = 0;
    next = check_escape(&ptr, &temperrorcode, cd->bracount, options, FALSE);
-Line 1864 
 if ((options & PCRE_EXTENDED) != 0)
+Line 2681 
 if ((options & PCRE_EXTENDED) != 0)
    for (;;)
      {
      while ((cd->ctypes[*ptr] & ctype_space) != 0) ptr++;
-     if (*ptr == '#')
+     if (*ptr == CHAR_NUMBER_SIGN)
        {
-       while (*(++ptr) != 0)
+       ptr++;
+       while (*ptr != 0)
+         {
          if (IS_NEWLINE(ptr)) { ptr += cd->nllen; break; }
+         ptr++;
+ #ifdef SUPPORT_UTF8
+         if (utf8) while ((*ptr & 0xc0) == 0x80) ptr++;
+ #endif
+         }
        }
      else break;
      }
-Line 1875 
 if ((options & PCRE_EXTENDED) != 0)
+Line 2699 
 if ((options & PCRE_EXTENDED) != 0)
  /* If the next thing is itself optional, we have to give up. */
- if (*ptr == '*' || *ptr == '?' || strncmp((char *)ptr, "{0,", 3) == 0)
+ if (*ptr == CHAR_ASTERISK || *ptr == CHAR_QUESTION_MARK ||
-   return FALSE;
+   strncmp((char *)ptr, STR_LEFT_CURLY_BRACKET STR_0 STR_COMMA, 3) == 0)
+     return FALSE;
- /* Now compare the next item with the previous opcode. If the previous is a
- positive single character match, "item" either contains the character or, if
- "item" is greater than 127 in utf8 mode, the character's bytes are in
- utf8_char. */
- /* Handle cases when the next item is a character. */
+ /* Now compare the next item with the previous opcode. First, handle cases when
+ the next item is a character. */
  if (next >= 0) switch(op_code)
    {
    case OP_CHAR:
  #ifdef SUPPORT_UTF8
-   if (utf8 && item > 127) { GETCHAR(item, utf8_char); }
+   GETCHARTEST(c, previous);
+ #else
+   c = *previous;
  #endif
-   return item != next;
+   return c != next;
-   /* For CHARNC (caseless character) we must check the other case. If we have
+   /* For CHARI (caseless character) we must check the other case. If we have
    Unicode property support, we can use it to test the other case of
    high-valued characters. */
-   case OP_CHARNC:
+   case OP_CHARI:
  #ifdef SUPPORT_UTF8
-   if (utf8 && item > 127) { GETCHAR(item, utf8_char); }
+   GETCHARTEST(c, previous);
+ #else
+   c = *previous;
  #endif
-   if (item == next) return FALSE;
+   if (c == next) return FALSE;
  #ifdef SUPPORT_UTF8
    if (utf8)
      {
      unsigned int othercase;
      if (next < 128) othercase = cd->fcc[next]; else
  #ifdef SUPPORT_UCP
-     othercase = _pcre_ucp_othercase((unsigned int)next);
+     othercase = UCD_OTHERCASE((unsigned int)next);
  #else
      othercase = NOTACHAR;
  #endif
-     return (unsigned int)item != othercase;
+     return (unsigned int)c != othercase;
      }
    else
  #endif  /* SUPPORT_UTF8 */
-   return (item != cd->fcc[next]);  /* Non-UTF-8 mode */
+   return (c != cd->fcc[next]);  /* Non-UTF-8 mode */
-   /* For OP_NOT, "item" must be a single-byte character. */
+   /* For OP_NOT and OP_NOTI, the data is always a single-byte character. These
+   opcodes are not used for multi-byte characters, because they are coded using
+   an XCLASS instead. */
    case OP_NOT:
-   if (next < 0) return FALSE;  /* Not a character */
+   return (c = *previous) == next;
-   if (item == next) return TRUE;
-   if ((options & PCRE_CASELESS) == 0) return FALSE;
+   case OP_NOTI:
+   if ((c = *previous) == next) return TRUE;
  #ifdef SUPPORT_UTF8
    if (utf8)
      {
      unsigned int othercase;
      if (next < 128) othercase = cd->fcc[next]; else
  #ifdef SUPPORT_UCP
-     othercase = _pcre_ucp_othercase(next);
+     othercase = UCD_OTHERCASE(next);
  #else
      othercase = NOTACHAR;
  #endif
-     return (unsigned int)item == othercase;
+     return (unsigned int)c == othercase;
      }
    else
  #endif  /* SUPPORT_UTF8 */
-   return (item == cd->fcc[next]);  /* Non-UTF-8 mode */
+   return (c == cd->fcc[next]);  /* Non-UTF-8 mode */
+   /* Note that OP_DIGIT etc. are generated only when PCRE_UCP is *not* set.
+   When it is set, \d etc. are converted into OP_(NOT_)PROP codes. */
    case OP_DIGIT:
    return next > 127 || (cd->ctypes[next] & ctype_digit) == 0;
-Line 1982 
 if (next >= 0) switch(op_code)
+Line 2812 
 if (next >= 0) switch(op_code)
      case 0x202f:
      case 0x205f:
      case 0x3000:
-     return op_code != OP_HSPACE;
+     return op_code == OP_NOT_HSPACE;
      default:
-     return op_code == OP_HSPACE;
+     return op_code != OP_NOT_HSPACE;
      }
+   case OP_ANYNL:
    case OP_VSPACE:
    case OP_NOT_VSPACE:
    switch(next)
-Line 1998 
 if (next >= 0) switch(op_code)
+Line 2829 
 if (next >= 0) switch(op_code)
      case 0x85:
      case 0x2028:
      case 0x2029:
-     return op_code != OP_VSPACE;
+     return op_code == OP_NOT_VSPACE;
      default:
-     return op_code == OP_VSPACE;
+     return op_code != OP_NOT_VSPACE;
      }
+ #ifdef SUPPORT_UCP
+   case OP_PROP:
+   return check_char_prop(next, previous[0], previous[1], FALSE);
+   case OP_NOTPROP:
+   return check_char_prop(next, previous[0], previous[1], TRUE);
+ #endif
    default:
    return FALSE;
    }
- /* Handle the case when the next item is \d, \s, etc. */
+ /* Handle the case when the next item is \d, \s, etc. Note that when PCRE_UCP
+ is set, \d turns into ESC_du rather than ESC_d, etc., so ESC_d etc. are
+ generated only when PCRE_UCP is *not* set, that is, when only ASCII
+ characteristics are recognized. Similarly, the opcodes OP_DIGIT etc. are
+ replaced by OP_PROP codes when PCRE_UCP is set. */
  switch(op_code)
    {
    case OP_CHAR:
-   case OP_CHARNC:
+   case OP_CHARI:
  #ifdef SUPPORT_UTF8
-   if (utf8 && item > 127) { GETCHAR(item, utf8_char); }
+   GETCHARTEST(c, previous);
+ #else
+   c = *previous;
  #endif
    switch(-next)
      {
      case ESC_d:
-     return item > 127 || (cd->ctypes[item] & ctype_digit) == 0;
+     return c > 127 || (cd->ctypes[c] & ctype_digit) == 0;
      case ESC_D:
-     return item <= 127 && (cd->ctypes[item] & ctype_digit) != 0;
+     return c <= 127 && (cd->ctypes[c] & ctype_digit) != 0;
      case ESC_s:
-     return item > 127 || (cd->ctypes[item] & ctype_space) == 0;
+     return c > 127 || (cd->ctypes[c] & ctype_space) == 0;
      case ESC_S:
-     return item <= 127 && (cd->ctypes[item] & ctype_space) != 0;
+     return c <= 127 && (cd->ctypes[c] & ctype_space) != 0;
      case ESC_w:
-     return item > 127 || (cd->ctypes[item] & ctype_word) == 0;
+     return c > 127 || (cd->ctypes[c] & ctype_word) == 0;
      case ESC_W:
-     return item <= 127 && (cd->ctypes[item] & ctype_word) != 0;
+     return c <= 127 && (cd->ctypes[c] & ctype_word) != 0;
      case ESC_h:
      case ESC_H:
-     switch(item)
+     switch(c)
        {
        case 0x09:
        case 0x20:
-Line 2067 
 switch(op_code)
+Line 2912 
 switch(op_code)
      case ESC_v:
      case ESC_V:
-     switch(item)
+     switch(c)
        {
        case 0x0a:
        case 0x0b:
-Line 2081 
 switch(op_code)
+Line 2926 
 switch(op_code)
        return -next == ESC_v;
        }
+     /* When PCRE_UCP is set, these values get generated for \d etc. Find
+     their substitutions and process them. The result will always be either
+     -ESC_p or -ESC_P. Then fall through to process those values. */
+ #ifdef SUPPORT_UCP
+     case ESC_du:
+     case ESC_DU:
+     case ESC_wu:
+     case ESC_WU:
+     case ESC_su:
+     case ESC_SU:
+       {
+       int temperrorcode = 0;
+       ptr = substitutes[-next - ESC_DU];
+       next = check_escape(&ptr, &temperrorcode, 0, options, FALSE);
+       if (temperrorcode != 0) return FALSE;
+       ptr++;    /* For compatibility */
+       }
+     /* Fall through */
+     case ESC_p:
+     case ESC_P:
+       {
+       int ptype, pdata, errorcodeptr;
+       BOOL negated;
+       ptr--;      /* Make ptr point at the p or P */
+       ptype = get_ucp(&ptr, &negated, &pdata, &errorcodeptr);
+       if (ptype < 0) return FALSE;
+       ptr++;      /* Point past the final curly ket */
+       /* If the property item is optional, we have to give up. (When generated
+       from \d etc by PCRE_UCP, this test will have been applied much earlier,
+       to the original \d etc. At this point, ptr will point to a zero byte. */
+       if (*ptr == CHAR_ASTERISK || *ptr == CHAR_QUESTION_MARK ||
+         strncmp((char *)ptr, STR_LEFT_CURLY_BRACKET STR_0 STR_COMMA, 3) == 0)
+           return FALSE;
+       /* Do the property check. */
+       return check_char_prop(c, ptype, pdata, (next == -ESC_P) != negated);
+       }
+ #endif
      default:
      return FALSE;
      }
+   /* In principle, support for Unicode properties should be integrated here as
+   well. It means re-organizing the above code so as to get hold of the property
+   values before switching on the op-code. However, I wonder how many patterns
+   combine ASCII \d etc with Unicode properties? (Note that if PCRE_UCP is set,
+   these op-codes are never generated.) */
    case OP_DIGIT:
    return next == -ESC_D || next == -ESC_s || next == -ESC_W ||
-          next == -ESC_h || next == -ESC_v;
+          next == -ESC_h || next == -ESC_v || next == -ESC_R;
    case OP_NOT_DIGIT:
    return next == -ESC_d;
    case OP_WHITESPACE:
-   return next == -ESC_S || next == -ESC_d || next == -ESC_w;
+   return next == -ESC_S || next == -ESC_d || next == -ESC_w || next == -ESC_R;
    case OP_NOT_WHITESPACE:
    return next == -ESC_s || next == -ESC_h || next == -ESC_v;
    case OP_HSPACE:
-   return next == -ESC_S || next == -ESC_H || next == -ESC_d || next == -ESC_w;
+   return next == -ESC_S || next == -ESC_H || next == -ESC_d ||
+          next == -ESC_w || next == -ESC_v || next == -ESC_R;
    case OP_NOT_HSPACE:
    return next == -ESC_h;
    /* Can't have \S in here because VT matches \S (Perl anomaly) */
+   case OP_ANYNL:
    case OP_VSPACE:
    return next == -ESC_V || next == -ESC_d || next == -ESC_w;
    case OP_NOT_VSPACE:
-   return next == -ESC_v;
+   return next == -ESC_v || next == -ESC_R;
    case OP_WORDCHAR:
-   return next == -ESC_W || next == -ESC_s || next == -ESC_h || next == -ESC_v;
+   return next == -ESC_W || next == -ESC_s || next == -ESC_h ||
+          next == -ESC_v || next == -ESC_R;
    case OP_NOT_WORDCHAR:
    return next == -ESC_w || next == -ESC_d;
-Line 2144 
 Arguments:
+Line 3043 
 Arguments:
    firstbyteptr   set to initial literal character, or < 0 (REQ_UNSET, REQ_NONE)
    reqbyteptr     set to the last literal character required, else < 0
    bcptr          points to current branch chain
+   cond_depth     conditional nesting depth
    cd             contains pointers to tables etc.
    lengthptr      NULL during the real compile phase
                   points to length accumulator during pre-compile phase
-Line 2155 
 Returns:         TRUE on success
+Line 3055 
 Returns:         TRUE on success
  static BOOL
  compile_branch(int *optionsptr, uschar **codeptr, const uschar **ptrptr,
    int *errorcodeptr, int *firstbyteptr, int *reqbyteptr, branch_chain *bcptr,
-   compile_data *cd, int *lengthptr)
+   int cond_depth, compile_data *cd, int *lengthptr)
  {
  int repeat_type, op_type;
  int repeat_min = 0, repeat_max = 0;      /* To please picky compilers */
-Line 2164 
 int greedy_default, greedy_non_default;
+Line 3064 
 int greedy_default, greedy_non_default;
  int firstbyte, reqbyte;
  int zeroreqbyte, zerofirstbyte;
  int req_caseopt, reqvary, tempreqvary;
- int options = *optionsptr;
+ int options = *optionsptr;               /* May change dynamically */
  int after_manual_callout = 0;
  int length_prevgroup = 0;
  register int c;
-Line 2176 
 BOOL inescq = FALSE;
+Line 3076 
 BOOL inescq = FALSE;
  BOOL groupsetfirstbyte = FALSE;
  const uschar *ptr = *ptrptr;
  const uschar *tempptr;
+ const uschar *nestptr = NULL;
  uschar *previous = NULL;
  uschar *previous_callout = NULL;
  uschar *save_hwm = NULL;
  uschar classbits[32];
+ /* We can fish out the UTF-8 setting once and for all into a BOOL, but we
+ must not do this for other options (e.g. PCRE_EXTENDED) because they may change
+ dynamically as we process the pattern. */
  #ifdef SUPPORT_UTF8
  BOOL class_utf8;
  BOOL utf8 = (options & PCRE_UTF8) != 0;
  uschar *class_utf8data;
+ uschar *class_utf8data_base;
  uschar utf8_char[6];
  #else
  BOOL utf8 = FALSE;
- uschar *utf8_char = NULL;
  #endif
- #ifdef DEBUG
+ #ifdef PCRE_DEBUG
  if (lengthptr != NULL) DPRINTF((">> start branch\n"));
  #endif
-Line 2224 
 req_caseopt = ((options & PCRE_CASELESS)
+Line 3129 
 req_caseopt = ((options & PCRE_CASELESS)
  for (;; ptr++)
    {
    BOOL negate_class;
+   BOOL should_flip_negation;
    BOOL possessive_quantifier;
    BOOL is_quantifier;
    BOOL is_recurse;
-Line 2238 
 for (;; ptr++)
+Line 3144 
 for (;; ptr++)
    int subfirstbyte;
    int terminator;
    int mclength;
+   int tempbracount;
    uschar mcbuffer[8];
    /* Get next byte in the pattern */
    c = *ptr;
+   /* If we are at the end of a nested substitution, revert to the outer level
+   string. Nesting only happens one level deep. */
+   if (c == 0 && nestptr != NULL)
+     {
+     ptr = nestptr;
+     nestptr = NULL;
+     c = *ptr;
+     }
    /* If we are in the pre-compile phase, accumulate the length used for the
    previous cycle of this loop. */
    if (lengthptr != NULL)
      {
- #ifdef DEBUG
+ #ifdef PCRE_DEBUG
      if (code > cd->hwm) cd->hwm = code;                 /* High water info */
  #endif
-     if (code > cd->start_workspace + COMPILE_WORK_SIZE) /* Check for overrun */
+     if (code > cd->start_workspace + WORK_SIZE_CHECK)   /* Check for overrun */
        {
        *errorcodeptr = ERR52;
        goto FAILED;
-Line 2274 
 for (;; ptr++)
+Line 3191 
 for (;; ptr++)
        goto FAILED;
        }
-     *lengthptr += code - last_code;
+     *lengthptr += (int)(code - last_code);
      DPRINTF(("length=%d added %d c=%c\n", *lengthptr, code - last_code, c));
      /* If "previous" is set and it is not at the start of the work space, move
-Line 2301 
 for (;; ptr++)
+Line 3218 
 for (;; ptr++)
    /* In the real compile phase, just check the workspace used by the forward
    reference list. */
-   else if (cd->hwm > cd->start_workspace + COMPILE_WORK_SIZE)
+   else if (cd->hwm > cd->start_workspace + WORK_SIZE_CHECK)
      {
      *errorcodeptr = ERR52;
      goto FAILED;
-Line 2311 
 for (;; ptr++)
+Line 3228 
 for (;; ptr++)
    if (inescq && c != 0)
      {
-     if (c == '\\' && ptr[1] == 'E')
+     if (c == CHAR_BACKSLASH && ptr[1] == CHAR_E)
        {
        inescq = FALSE;
        ptr++;
-Line 2337 
 for (;; ptr++)
+Line 3254 
 for (;; ptr++)
    /* Fill in length of a previous callout, except when the next thing is
    a quantifier. */
-   is_quantifier = c == '*' || c == '+' || c == '?' ||
+   is_quantifier =
-     (c == '{' && is_counted_repeat(ptr+1));
+     c == CHAR_ASTERISK || c == CHAR_PLUS || c == CHAR_QUESTION_MARK ||
+     (c == CHAR_LEFT_CURLY_BRACKET && is_counted_repeat(ptr+1));
    if (!is_quantifier && previous_callout != NULL &&
         after_manual_callout-- <= 0)
-Line 2348 
 for (;; ptr++)
+Line 3266 
 for (;; ptr++)
      previous_callout = NULL;
      }
-   /* In extended mode, skip white space and comments */
+   /* In extended mode, skip white space and comments. */
    if ((options & PCRE_EXTENDED) != 0)
      {
      if ((cd->ctypes[c] & ctype_space) != 0) continue;
-     if (c == '#')
+     if (c == CHAR_NUMBER_SIGN)
        {
-       while (*(++ptr) != 0)
+       ptr++;
+       while (*ptr != 0)
          {
          if (IS_NEWLINE(ptr)) { ptr += cd->nllen - 1; break; }
+         ptr++;
+ #ifdef SUPPORT_UTF8
+         if (utf8) while ((*ptr & 0xc0) == 0x80) ptr++;
+ #endif
          }
        if (*ptr != 0) continue;
-Line 2378 
 for (;; ptr++)
+Line 3301 
 for (;; ptr++)
      {
      /* ===================================================================*/
      case 0:                        /* The branch terminates at string end */
-     case '|':                      /* or | or ) */
+     case CHAR_VERTICAL_LINE:       /* or | or ) */
-     case ')':
+     case CHAR_RIGHT_PARENTHESIS:
      *firstbyteptr = firstbyte;
      *reqbyteptr = reqbyte;
      *codeptr = code;
-Line 2391 
 for (;; ptr++)
+Line 3314 
 for (;; ptr++)
          *errorcodeptr = ERR20;
          goto FAILED;
          }
-       *lengthptr += code - last_code;   /* To include callout length */
+       *lengthptr += (int)(code - last_code);   /* To include callout length */
        DPRINTF((">> end branch\n"));
        }
      return TRUE;
-Line 2401 
 for (;; ptr++)
+Line 3324 
 for (;; ptr++)
      /* Handle single-character metacharacters. In multiline mode, ^ disables
      the setting of any following char as a first character. */
-     case '^':
+     case CHAR_CIRCUMFLEX_ACCENT:
+     previous = NULL;
      if ((options & PCRE_MULTILINE) != 0)
        {
        if (firstbyte == REQ_UNSET) firstbyte = REQ_NONE;
+       *code++ = OP_CIRCM;
        }
-     previous = NULL;
+     else *code++ = OP_CIRC;
-     *code++ = OP_CIRC;
      break;
-     case '$':
+     case CHAR_DOLLAR_SIGN:
      previous = NULL;
-     *code++ = OP_DOLL;
+     *code++ = ((options & PCRE_MULTILINE) != 0)? OP_DOLLM : OP_DOLL;
      break;
      /* There can never be a first char if '.' is first, whatever happens about
      repeats. The value of reqbyte doesn't change either. */
-     case '.':
+     case CHAR_DOT:
      if (firstbyte == REQ_UNSET) firstbyte = REQ_NONE;
      zerofirstbyte = firstbyte;
      zeroreqbyte = reqbyte;
      previous = code;
-     *code++ = OP_ANY;
+     *code++ = ((options & PCRE_DOTALL) != 0)? OP_ALLANY: OP_ANY;
      break;
-Line 2438 
 for (;; ptr++)
+Line 3362 
 for (;; ptr++)
      opcode is compiled. It may optionally have a bit map for characters < 256,
      but those above are are explicitly listed afterwards. A flag byte tells
      whether the bitmap is present, and whether this is a negated class or not.
-     */
-     case '[':
+     In JavaScript compatibility mode, an isolated ']' causes an error. In
+     default (Perl) mode, it is treated as a data character. */
+     case CHAR_RIGHT_SQUARE_BRACKET:
+     if ((cd->external_options & PCRE_JAVASCRIPT_COMPAT) != 0)
+       {
+       *errorcodeptr = ERR64;
+       goto FAILED;
+       }
+     goto NORMAL_CHAR;
+     case CHAR_LEFT_SQUARE_BRACKET:
      previous = code;
      /* PCRE supports POSIX class stuff inside a class. Perl gives an error if
      they are encountered at the top level, so we'll do that too. */
-     if ((ptr[1] == ':' || ptr[1] == '.' || ptr[1] == '=') &&
+     if ((ptr[1] == CHAR_COLON || ptr[1] == CHAR_DOT ||
-         check_posix_syntax(ptr, &tempptr, cd))
+          ptr[1] == CHAR_EQUALS_SIGN) &&
+         check_posix_syntax(ptr, &tempptr))
        {
-       *errorcodeptr = (ptr[1] == ':')? ERR13 : ERR31;
+       *errorcodeptr = (ptr[1] == CHAR_COLON)? ERR13 : ERR31;
        goto FAILED;
        }
      /* If the first character is '^', set the negation flag and skip it. Also,
      if the first few characters (either before or after ^) are \Q\E or \E we
      skip them too. This makes for compatibility with Perl. */
      negate_class = FALSE;
      for (;;)
        {
        c = *(++ptr);
-       if (c == '\\')
+       if (c == CHAR_BACKSLASH)
          {
-         if (ptr[1] == 'E') ptr++;
+         if (ptr[1] == CHAR_E)
-           else if (strncmp((const char *)ptr+1, "Q\\E", 3) == 0) ptr += 3;
+           ptr++;
-             else break;
+         else if (strncmp((const char *)ptr+1,
+                           STR_Q STR_BACKSLASH STR_E, 3) == 0)
+           ptr += 3;
+         else
+           break;
          }
-       else if (!negate_class && c == '^')
+       else if (!negate_class && c == CHAR_CIRCUMFLEX_ACCENT)
          negate_class = TRUE;
        else break;
        }
+     /* Empty classes are allowed in JavaScript compatibility mode. Otherwise,
+     an initial ']' is taken as a data character -- the code below handles
+     that. In JS mode, [] must always fail, so generate OP_FAIL, whereas
+     [^] must match any character, so generate OP_ALLANY. */
+     if (c == CHAR_RIGHT_SQUARE_BRACKET &&
+         (cd->external_options & PCRE_JAVASCRIPT_COMPAT) != 0)
+       {
+       *code++ = negate_class? OP_ALLANY : OP_FAIL;
+       if (firstbyte == REQ_UNSET) firstbyte = REQ_NONE;
+       zerofirstbyte = firstbyte;
+       break;
+       }
+     /* If a class contains a negative special such as \S, we need to flip the
+     negation flag at the end, so that support for characters > 255 works
+     correctly (they are all included in the class). */
+     should_flip_negation = FALSE;
      /* Keep a count of chars with values < 256 so that we can optimize the case
      of just a single character (as long as it's < 256). However, For higher
-Line 2489 
 for (;; ptr++)
+Line 3448 
 for (;; ptr++)
  #ifdef SUPPORT_UTF8
      class_utf8 = FALSE;                       /* No chars >= 256 */
      class_utf8data = code + LINK_SIZE + 2;    /* For UTF-8 items */
+     class_utf8data_base = class_utf8data;     /* For resetting in pass 1 */
  #endif
      /* Process characters until ] is reached. By writing this as a "do" it
-Line 2504 
 for (;; ptr++)
+Line 3464 
 for (;; ptr++)
          {                           /* Braces are required because the */
          GETCHARLEN(c, ptr, ptr);    /* macro generates multiple statements */
          }
+       /* In the pre-compile phase, accumulate the length of any UTF-8 extra
+       data and reset the pointer. This is so that very large classes that
+       contain a zillion UTF-8 characters no longer overwrite the work space
+       (which is on the stack). */
+       if (lengthptr != NULL)
+         {
+         *lengthptr += class_utf8data - class_utf8data_base;
+         class_utf8data = class_utf8data_base;
+         }
  #endif
        /* Inside \Q...\E everything is literal except \E */
        if (inescq)
          {
-         if (c == '\\' && ptr[1] == 'E')     /* If we are at \E */
+         if (c == CHAR_BACKSLASH && ptr[1] == CHAR_E)  /* If we are at \E */
            {
            inescq = FALSE;                   /* Reset literal state */
            ptr++;                            /* Skip the 'E' */
-Line 2525 
 for (;; ptr++)
+Line 3497 
 for (;; ptr++)
        [.ch.] and [=ch=] ("collating elements") and fault them, as Perl
 .6 and 5.8 do. */
-       if (c == '[' &&
+       if (c == CHAR_LEFT_SQUARE_BRACKET &&
-           (ptr[1] == ':' || ptr[1] == '.' || ptr[1] == '=') &&
+           (ptr[1] == CHAR_COLON || ptr[1] == CHAR_DOT ||
-           check_posix_syntax(ptr, &tempptr, cd))
+            ptr[1] == CHAR_EQUALS_SIGN) && check_posix_syntax(ptr, &tempptr))
          {
          BOOL local_negate = FALSE;
          int posix_class, taboffset, tabopt;
          register const uschar *cbits = cd->cbits;
          uschar pbits[32];
-         if (ptr[1] != ':')
+         if (ptr[1] != CHAR_COLON)
            {
            *errorcodeptr = ERR31;
            goto FAILED;
            }
          ptr += 2;
-         if (*ptr == '^')
+         if (*ptr == CHAR_CIRCUMFLEX_ACCENT)
            {
            local_negate = TRUE;
+           should_flip_negation = TRUE;  /* Note negative special */
            ptr++;
            }
-         posix_class = check_posix_name(ptr, tempptr - ptr);
+         posix_class = check_posix_name(ptr, (int)(tempptr - ptr));
          if (posix_class < 0)
            {
            *errorcodeptr = ERR30;
-Line 2561 
 for (;; ptr++)
+Line 3534 
 for (;; ptr++)
          if ((options & PCRE_CASELESS) != 0 && posix_class <= 2)
            posix_class = 0;
-         /* We build the bit map for the POSIX class in a chunk of local store
+         /* When PCRE_UCP is set, some of the POSIX classes are converted to
-         because we may be adding and subtracting from it, and we don't want to
+         different escape sequences that use Unicode properties. */
-         subtract bits that may be in the main map already. At the end we or the
-         result into the bit map that is being built. */
+ #ifdef SUPPORT_UCP
+         if ((options & PCRE_UCP) != 0)
+           {
+           int pc = posix_class + ((local_negate)? POSIX_SUBSIZE/2 : 0);
+           if (posix_substitutes[pc] != NULL)
+             {
+             nestptr = tempptr + 1;
+             ptr = posix_substitutes[pc] - 1;
+             continue;
+             }
+           }
+ #endif
+         /* In the non-UCP case, we build the bit map for the POSIX class in a
+         chunk of local store because we may be adding and subtracting from it,
+         and we don't want to subtract bits that may be in the main map already.
+         At the end we or the result into the bit map that is being built. */
          posix_class *= 3;
-Line 2608 
 for (;; ptr++)
+Line 3596 
 for (;; ptr++)
        /* Backslash may introduce a single character, or it may introduce one
        of the specials, which just set a flag. The sequence \b is a special
-       case. Inside a class (and only there) it is treated as backspace.
+       case. Inside a class (and only there) it is treated as backspace. We
-       Elsewhere it marks a word boundary. Other escapes have preset maps ready
+       assume that other escapes have more than one character in them, so set
-       to 'or' into the one we are building. We assume they have more than one
+       class_charcount bigger than one. Unrecognized escapes fall through and
-       character in them, so set class_charcount bigger than one. */
+       are either treated as literal characters (by default), or are faulted if
+       PCRE_EXTRA is set. */
-       if (c == '\\')
+       if (c == CHAR_BACKSLASH)
          {
          c = check_escape(&ptr, errorcodeptr, cd->bracount, options, TRUE);
          if (*errorcodeptr != 0) goto FAILED;
-         if (-c == ESC_b) c = '\b';       /* \b is backslash in a class */
+         if (-c == ESC_b) c = CHAR_BS;    /* \b is backspace in a class */
-         else if (-c == ESC_X) c = 'X';   /* \X is literal X in a class */
-         else if (-c == ESC_R) c = 'R';   /* \R is literal R in a class */
          else if (-c == ESC_Q)            /* Handle start of quoted string */
            {
-           if (ptr[1] == '\\' && ptr[2] == 'E')
+           if (ptr[1] == CHAR_BACKSLASH && ptr[2] == CHAR_E)
              {
              ptr += 2; /* avoid empty string */
              }
            else inescq = TRUE;
            continue;
            }
+         else if (-c == ESC_E) continue;  /* Ignore orphan \E */
          if (c < 0)
            {
            register const uschar *cbits = cd->cbits;
            class_charcount += 2;     /* Greater than 1 is what matters */
-           /* Save time by not doing this in the pre-compile phase. */
+           switch (-c)
-           if (lengthptr == NULL) switch (-c)
              {
+ #ifdef SUPPORT_UCP
+             case ESC_du:     /* These are the values given for \d etc */
+             case ESC_DU:     /* when PCRE_UCP is set. We replace the */
+             case ESC_wu:     /* escape sequence with an appropriate \p */
+             case ESC_WU:     /* or \P to test Unicode properties instead */
+             case ESC_su:     /* of the default ASCII testing. */
+             case ESC_SU:
+             nestptr = ptr;
+             ptr = substitutes[-c - ESC_DU] - 1;  /* Just before substitute */
+             class_charcount -= 2;                /* Undo! */
+             continue;
+ #endif
              case ESC_d:
              for (c = 0; c < 32; c++) classbits[c] |= cbits[c+cbit_digit];
              continue;
              case ESC_D:
+             should_flip_negation = TRUE;
              for (c = 0; c < 32; c++) classbits[c] |= ~cbits[c+cbit_digit];
              continue;
-Line 2653 
 for (;; ptr++)
+Line 3652 
 for (;; ptr++)
              continue;
              case ESC_W:
+             should_flip_negation = TRUE;
              for (c = 0; c < 32; c++) classbits[c] |= ~cbits[c+cbit_word];
              continue;
+             /* Perl 5.004 onwards omits VT from \s, but we must preserve it
+             if it was previously set by something earlier in the character
+             class. */
              case ESC_s:
-             for (c = 0; c < 32; c++) classbits[c] |= cbits[c+cbit_space];
+             classbits[0] |= cbits[cbit_space];
-             classbits[1] &= ~0x08;   /* Perl 5.004 onwards omits VT from \s */
+             classbits[1] |= cbits[cbit_space+1] & ~0x08;
+             for (c = 2; c < 32; c++) classbits[c] |= cbits[c+cbit_space];
              continue;
              case ESC_S:
+             should_flip_negation = TRUE;
              for (c = 0; c < 32; c++) classbits[c] |= ~cbits[c+cbit_space];
              classbits[1] |= 0x08;    /* Perl 5.004 onwards omits VT from \s */
              continue;
-             case ESC_E: /* Perl ignores an orphan \E */
+             case ESC_h:
-             continue;
-             default:    /* Not recognized; fall through */
-             break;      /* Need "default" setting to stop compiler warning. */
-             }
-           /* In the pre-compile phase, just do the recognition. */
-           else if (c == -ESC_d || c == -ESC_D || c == -ESC_w ||
-                    c == -ESC_W || c == -ESC_s || c == -ESC_S) continue;
-           /* We need to deal with \H, \h, \V, and \v in both phases because
-           they use extra memory. */
-           if (-c == ESC_h)
-             {
              SETBIT(classbits, 0x09); /* VT */
              SETBIT(classbits, 0x20); /* SPACE */
              SETBIT(classbits, 0xa0); /* NSBP */
-Line 2706 
 for (;; ptr++)
+Line 3696 
 for (;; ptr++)
                }
  #endif
              continue;
-             }
-           if (-c == ESC_H)
+             case ESC_H:
-             {
              for (c = 0; c < 32; c++)
                {
                int x = 0xff;
-Line 2751 
 for (;; ptr++)
+Line 3739 
 for (;; ptr++)
                }
  #endif
              continue;
-             }
-           if (-c == ESC_v)
+             case ESC_v:
-             {
              SETBIT(classbits, 0x0a); /* LF */
              SETBIT(classbits, 0x0b); /* VT */
              SETBIT(classbits, 0x0c); /* FF */
-Line 2770 
 for (;; ptr++)
+Line 3756 
 for (;; ptr++)
                }
  #endif
              continue;
-             }
-           if (-c == ESC_V)
+             case ESC_V:
-             {
              for (c = 0; c < 32; c++)
                {
                int x = 0xff;
-Line 2803 
 for (;; ptr++)
+Line 3787 
 for (;; ptr++)
                }
  #endif
              continue;
-             }
-           /* We need to deal with \P and \p in both phases. */
  #ifdef SUPPORT_UCP
-           if (-c == ESC_p || -c == ESC_P)
+             case ESC_p:
-             {
+             case ESC_P:
-             BOOL negated;
+               {
-             int pdata;
+               BOOL negated;
-             int ptype = get_ucp(&ptr, &negated, &pdata, errorcodeptr);
+               int pdata;
-             if (ptype < 0) goto FAILED;
+               int ptype = get_ucp(&ptr, &negated, &pdata, errorcodeptr);
-             class_utf8 = TRUE;
+               if (ptype < 0) goto FAILED;
-             *class_utf8data++ = ((-c == ESC_p) != negated)?
+               class_utf8 = TRUE;
-               XCL_PROP : XCL_NOTPROP;
+               *class_utf8data++ = ((-c == ESC_p) != negated)?
-             *class_utf8data++ = ptype;
+                 XCL_PROP : XCL_NOTPROP;
-             *class_utf8data++ = pdata;
+               *class_utf8data++ = ptype;
-             class_charcount -= 2;   /* Not a < 256 character */
+               *class_utf8data++ = pdata;
-             continue;
+               class_charcount -= 2;   /* Not a < 256 character */
-             }
+               continue;
+               }
  #endif
-           /* Unrecognized escapes are faulted if PCRE is running in its
+             /* Unrecognized escapes are faulted if PCRE is running in its
-           strict mode. By default, for compatibility with Perl, they are
+             strict mode. By default, for compatibility with Perl, they are
-           treated as literals. */
+             treated as literals. */
-           if ((options & PCRE_EXTRA) != 0)
+             default:
-             {
+             if ((options & PCRE_EXTRA) != 0)
-             *errorcodeptr = ERR7;
+               {
-             goto FAILED;
+               *errorcodeptr = ERR7;
+               goto FAILED;
+               }
+             class_charcount -= 2;  /* Undo the default count from above */
+             c = *ptr;              /* Get the final character and fall through */
+             break;
              }
-           class_charcount -= 2;  /* Undo the default count from above */
-           c = *ptr;              /* Get the final character and fall through */
            }
          /* Fall through if we have a single character (c >= 0). This may be
-Line 2848 
 for (;; ptr++)
+Line 3832 
 for (;; ptr++)
        entirely. The code for handling \Q and \E is messy. */
        CHECK_RANGE:
-       while (ptr[1] == '\\' && ptr[2] == 'E')
+       while (ptr[1] == CHAR_BACKSLASH && ptr[2] == CHAR_E)
          {
          inescq = FALSE;
          ptr += 2;
-Line 2856 
 for (;; ptr++)
+Line 3840 
 for (;; ptr++)
        oldptr = ptr;
-       if (!inescq && ptr[1] == '-')
+       /* Remember \r or \n */
+       if (c == CHAR_CR || c == CHAR_NL) cd->external_flags |= PCRE_HASCRORLF;
+       /* Check for range */
+       if (!inescq && ptr[1] == CHAR_MINUS)
          {
          int d;
          ptr += 2;
-         while (*ptr == '\\' && ptr[1] == 'E') ptr += 2;
+         while (*ptr == CHAR_BACKSLASH && ptr[1] == CHAR_E) ptr += 2;
          /* If we hit \Q (not followed by \E) at this point, go into escaped
          mode. */
-         while (*ptr == '\\' && ptr[1] == 'Q')
+         while (*ptr == CHAR_BACKSLASH && ptr[1] == CHAR_Q)
            {
            ptr += 2;
-           if (*ptr == '\\' && ptr[1] == 'E') { ptr += 2; continue; }
+           if (*ptr == CHAR_BACKSLASH && ptr[1] == CHAR_E)
+             { ptr += 2; continue; }
            inescq = TRUE;
            break;
            }
-         if (*ptr == 0 || (!inescq && *ptr == ']'))
+         if (*ptr == 0 || (!inescq && *ptr == CHAR_RIGHT_SQUARE_BRACKET))
            {
            ptr = oldptr;
            goto LONE_SINGLE_CHARACTER;
-Line 2892 
 for (;; ptr++)
+Line 3883 
 for (;; ptr++)
          not any of the other escapes. Perl 5.6 treats a hyphen as a literal
          in such circumstances. */
-         if (!inescq && d == '\\')
+         if (!inescq && d == CHAR_BACKSLASH)
            {
            d = check_escape(&ptr, errorcodeptr, cd->bracount, options, TRUE);
            if (*errorcodeptr != 0) goto FAILED;
-           /* \b is backslash; \X is literal X; \R is literal R; any other
+           /* \b is backspace; any other special means the '-' was literal */
-           special means the '-' was literal */
            if (d < 0)
              {
-             if (d == -ESC_b) d = '\b';
+             if (d == -ESC_b) d = CHAR_BS; else
-             else if (d == -ESC_X) d = 'X';
-             else if (d == -ESC_R) d = 'R'; else
                {
                ptr = oldptr;
                goto LONE_SINGLE_CHARACTER;  /* A few lines below */
-Line 2923 
 for (;; ptr++)
+Line 3911 
 for (;; ptr++)
          if (d == c) goto LONE_SINGLE_CHARACTER;  /* A few lines below */
+         /* Remember \r or \n */
+         if (d == CHAR_CR || d == CHAR_NL) cd->external_flags |= PCRE_HASCRORLF;
          /* In UTF-8 mode, if the upper limit is > 255, or > 127 for caseless
          matching, we have to use an XCLASS with extra data items. Caseless
          matching for characters > 127 is available only if UCP support is
-Line 3041 
 for (;; ptr++)
+Line 4033 
 for (;; ptr++)
          if ((options & PCRE_CASELESS) != 0)
            {
            unsigned int othercase;
-           if ((othercase = _pcre_ucp_othercase(c)) != NOTACHAR)
+           if ((othercase = UCD_OTHERCASE(c)) != c)
              {
              *class_utf8data++ = XCL_SINGLE;
              class_utf8data += _pcre_ord2utf8(othercase, class_utf8data);
-Line 3066 
 for (;; ptr++)
+Line 4058 
 for (;; ptr++)
          }
        }
-     /* Loop until ']' reached. This "while" is the end of the "do" above. */
+     /* Loop until ']' reached. This "while" is the end of the "do" far above.
+     If we are at the end of an internal nested string, revert to the outer
+     string. */
+     while (((c = *(++ptr)) != 0 ||
+            (nestptr != NULL &&
+              (ptr = nestptr, nestptr = NULL, c = *(++ptr)) != 0)) &&
+            (c != CHAR_RIGHT_SQUARE_BRACKET || inescq));
-     while ((c = *(++ptr)) != 0 && (c != ']' || inescq));
+     /* Check for missing terminating ']' */
-     if (c == 0)                          /* Missing terminating ']' */
+     if (c == 0)
        {
        *errorcodeptr = ERR6;
        goto FAILED;
        }
      /* If class_charcount is 1, we saw precisely one character whose value is
-     less than 256. In non-UTF-8 mode we can always optimize. In UTF-8 mode, we
+     less than 256. As long as there were no characters >= 128 and there was no
-     can optimize the negative case only if there were no characters >= 128
+     use of \p or \P, in other words, no use of any XCLASS features, we can
-     because OP_NOT and the related opcodes like OP_NOTSTAR operate on
+     optimize.
-     single-bytes only. This is an historical hangover. Maybe one day we can
-     tidy these opcodes to handle multi-byte characters.
+     In UTF-8 mode, we can optimize the negative case only if there were no
+     characters >= 128 because OP_NOT and the related opcodes like OP_NOTSTAR
+     operate on single-bytes characters only. This is an historical hangover.
+     Maybe one day we can tidy these opcodes to handle multi-byte characters.
      The optimization throws away the bit map. We turn the item into a
--character OP_CHAR[NC] if it's positive, or OP_NOT if it's negative. Note
+-character OP_CHAR[I] if it's positive, or OP_NOT[I] if it's negative.
-     that OP_NOT does not support multibyte characters. In the positive case, it
+     Note that OP_NOT[I] does not support multibyte characters. In the positive
-     can cause firstbyte to be set. Otherwise, there can be no first char if
+     case, it can cause firstbyte to be set. Otherwise, there can be no first
-     this item is first, whatever repeat count may follow. In the case of
+     char if this item is first, whatever repeat count may follow. In the case
-     reqbyte, save the previous value for reinstating. */
+     of reqbyte, save the previous value for reinstating. */
  #ifdef SUPPORT_UTF8
-     if (class_charcount == 1 &&
+     if (class_charcount == 1 && !class_utf8 &&
-           (!utf8 ||
+       (!utf8 || !negate_class || class_lastchar < 128))
-           (!class_utf8 && (!negate_class || class_lastchar < 128))))
  #else
      if (class_charcount == 1)
  #endif
        {
        zeroreqbyte = reqbyte;
-       /* The OP_NOT opcode works on one-byte characters only. */
+       /* The OP_NOT[I] opcodes work on one-byte characters only. */
        if (negate_class)
          {
          if (firstbyte == REQ_UNSET) firstbyte = REQ_NONE;
          zerofirstbyte = firstbyte;
-         *code++ = OP_NOT;
+         *code++ = ((options & PCRE_CASELESS) != 0)? OP_NOTI: OP_NOT;
          *code++ = class_lastchar;
          break;
          }
-Line 3137 
 for (;; ptr++)
+Line 4137 
 for (;; ptr++)
      zeroreqbyte = reqbyte;
      /* If there are characters with values > 255, we have to compile an
-     extended class, with its own opcode. If there are no characters < 256,
+     extended class, with its own opcode, unless there was a negated special
-     we can omit the bitmap in the actual compiled code. */
+     such as \S in the class, and PCRE_UCP is not set, because in that case all
+     characters > 255 are in the class, so any that were explicitly given as
+     well can be ignored. If (when there are explicit characters > 255 that must
+     be listed) there are no characters < 256, we can omit the bitmap in the
+     actual compiled code. */
  #ifdef SUPPORT_UTF8
-     if (class_utf8)
+     if (class_utf8 && (!should_flip_negation || (options & PCRE_UCP) != 0))
        {
        *class_utf8data++ = XCL_END;    /* Marks the end of extra data */
        *code++ = OP_XCLASS;
-Line 3167 
 for (;; ptr++)
+Line 4171 
 for (;; ptr++)
        }
  #endif
-     /* If there are no characters > 255, negate the 32-byte map if necessary,
+     /* If there are no characters > 255, or they are all to be included or
-     and copy it into the code vector. If this is the first thing in the branch,
+     excluded, set the opcode to OP_CLASS or OP_NCLASS, depending on whether the
-     there can be no first char setting, whatever the repeat count. Any reqbyte
+     whole class was negated and whether there were negative specials such as \S
-     setting must remain unchanged after any kind of repeat. */
+     (non-UCP) in the class. Then copy the 32-byte map into the code vector,
+     negating it if necessary. */
+     *code++ = (negate_class == should_flip_negation) ? OP_CLASS : OP_NCLASS;
      if (negate_class)
        {
-       *code++ = OP_NCLASS;
        if (lengthptr == NULL)    /* Save time in the pre-compile phase */
          for (c = 0; c < 32; c++) code[c] = ~classbits[c];
        }
      else
        {
-       *code++ = OP_CLASS;
        memcpy(code, classbits, 32);
        }
      code += 32;
-Line 3191 
 for (;; ptr++)
+Line 4195 
 for (;; ptr++)
      /* Various kinds of repeat; '{' is not necessarily a quantifier, but this
      has been tested above. */
-     case '{':
+     case CHAR_LEFT_CURLY_BRACKET:
      if (!is_quantifier) goto NORMAL_CHAR;
      ptr = read_repeat_counts(ptr+1, &repeat_min, &repeat_max, errorcodeptr);
      if (*errorcodeptr != 0) goto FAILED;
      goto REPEAT;
-     case '*':
+     case CHAR_ASTERISK:
      repeat_min = 0;
      repeat_max = -1;
      goto REPEAT;
-     case '+':
+     case CHAR_PLUS:
      repeat_min = 1;
      repeat_max = -1;
      goto REPEAT;
-     case '?':
+     case CHAR_QUESTION_MARK:
      repeat_min = 0;
      repeat_max = 1;
-Line 3231 
 for (;; ptr++)
+Line 4235 
 for (;; ptr++)
      op_type = 0;                    /* Default single-char op codes */
      possessive_quantifier = FALSE;  /* Default not possessive quantifier */
-     /* Save start of previous item, in case we have to move it up to make space
+     /* Save start of previous item, in case we have to move it up in order to
-     for an inserted OP_ONCE for the additional '+' extension. */
+     insert something before it. */
      tempcode = previous;
-Line 3242 
 for (;; ptr++)
+Line 4246 
 for (;; ptr++)
      but if PCRE_UNGREEDY is set, it works the other way round. We change the
      repeat type to the non-default. */
-     if (ptr[1] == '+')
+     if (ptr[1] == CHAR_PLUS)
        {
        repeat_type = 0;                  /* Force greedy */
        possessive_quantifier = TRUE;
        ptr++;
        }
-     else if (ptr[1] == '?')
+     else if (ptr[1] == CHAR_QUESTION_MARK)
        {
        repeat_type = greedy_non_default;
        ptr++;
        }
      else repeat_type = greedy_default;
+     /* If previous was a recursion call, wrap it in atomic brackets so that
+     previous becomes the atomic group. All recursions were so wrapped in the
+     past, but it no longer happens for non-repeated recursions. In fact, the
+     repeated ones could be re-implemented independently so as not to need this,
+     but for the moment we rely on the code for repeating groups. */
+     if (*previous == OP_RECURSE)
+       {
+       memmove(previous + 1 + LINK_SIZE, previous, 1 + LINK_SIZE);
+       *previous = OP_ONCE;
+       PUT(previous, 1, 2 + 2*LINK_SIZE);
+       previous[2 + 2*LINK_SIZE] = OP_KET;
+       PUT(previous, 3 + 2*LINK_SIZE, 2 + 2*LINK_SIZE);
+       code += 2 + 2 * LINK_SIZE;
+       length_prevgroup = 3 + 3*LINK_SIZE;
+       /* When actually compiling, we need to check whether this was a forward
+       reference, and if so, adjust the offset. */
+       if (lengthptr == NULL && cd->hwm >= cd->start_workspace + LINK_SIZE)
+         {
+         int offset = GET(cd->hwm, -LINK_SIZE);
+         if (offset == previous + 1 - cd->start_code)
+           PUT(cd->hwm, -LINK_SIZE, offset + 1 + LINK_SIZE);
+         }
+       }
+     /* Now handle repetition for the different types of item. */
      /* If previous was a character match, abolish the item and generate a
      repeat item instead. If a char item has a minumum of more than one, ensure
      that it is set in reqbyte - it might not be if a sequence such as x{3} is
      the first thing in a branch because the x will have gone into firstbyte
      instead.  */
-     if (*previous == OP_CHAR || *previous == OP_CHARNC)
+     if (*previous == OP_CHAR || *previous == OP_CHARI)
        {
+       op_type = (*previous == OP_CHAR)? 0 : OP_STARI - OP_STAR;
        /* Deal with UTF-8 characters that take up more than one byte. It's
        easier to write this out separately than try to macrify it. Use c to
        hold the length of the character in bytes, plus 0x80 to flag that it's a
-Line 3295 
 for (;; ptr++)
+Line 4330 
 for (;; ptr++)
        if (!possessive_quantifier &&
            repeat_max < 0 &&
-           check_auto_possessive(*previous, c, utf8, utf8_char, ptr + 1,
+           check_auto_possessive(previous, utf8, ptr + 1, options, cd))
-             options, cd))
          {
          repeat_type = 0;    /* Force greedy */
          possessive_quantifier = TRUE;
-Line 3308 
 for (;; ptr++)
+Line 4342 
 for (;; ptr++)
      /* If previous was a single negated character ([^a] or similar), we use
      one of the special opcodes, replacing it. The code is shared with single-
      character repeats by setting opt_type to add a suitable offset into
-     repeat_type. We can also test for auto-possessification. OP_NOT is
+     repeat_type. We can also test for auto-possessification. OP_NOT and OP_NOTI
-     currently used only for single-byte chars. */
+     are currently used only for single-byte chars. */
-     else if (*previous == OP_NOT)
+     else if (*previous == OP_NOT || *previous == OP_NOTI)
        {
-       op_type = OP_NOTSTAR - OP_STAR;  /* Use "not" opcodes */
+       op_type = ((*previous == OP_NOT)? OP_NOTSTAR : OP_NOTSTARI) - OP_STAR;
        c = previous[1];
        if (!possessive_quantifier &&
            repeat_max < 0 &&
-           check_auto_possessive(OP_NOT, c, utf8, NULL, ptr + 1, options, cd))
+           check_auto_possessive(previous, utf8, ptr + 1, options, cd))
          {
          repeat_type = 0;    /* Force greedy */
          possessive_quantifier = TRUE;
-Line 3341 
 for (;; ptr++)
+Line 4375 
 for (;; ptr++)
        if (!possessive_quantifier &&
            repeat_max < 0 &&
-           check_auto_possessive(c, 0, utf8, NULL, ptr + 1, options, cd))
+           check_auto_possessive(previous, utf8, ptr + 1, options, cd))
          {
          repeat_type = 0;    /* Force greedy */
          possessive_quantifier = TRUE;
-Line 3363 
 for (;; ptr++)
+Line 4397 
 for (;; ptr++)
        if (repeat_max == 0) goto END_REPEAT;
+       /*--------------------------------------------------------------------*/
+       /* This code is obsolete from release 8.00; the restriction was finally
+       removed: */
        /* All real repeats make it impossible to handle partial matching (maybe
        one day we will be able to remove this restriction). */
-       if (repeat_max != 1) cd->nopartial = TRUE;
+       /* if (repeat_max != 1) cd->external_flags |= PCRE_NOPARTIAL; */
+       /*--------------------------------------------------------------------*/
        /* Combine the op_type with the repeat_type */
-Line 3505 
 for (;; ptr++)
+Line 4544 
 for (;; ptr++)
  #ifdef SUPPORT_UTF8
               *previous == OP_XCLASS ||
  #endif
-              *previous == OP_REF)
+              *previous == OP_REF ||
+              *previous == OP_REFI)
        {
        if (repeat_max == 0)
          {
-Line 3513 
 for (;; ptr++)
+Line 4553 
 for (;; ptr++)
          goto END_REPEAT;
          }
+       /*--------------------------------------------------------------------*/
+       /* This code is obsolete from release 8.00; the restriction was finally
+       removed: */
        /* All real repeats make it impossible to handle partial matching (maybe
        one day we will be able to remove this restriction). */
-       if (repeat_max != 1) cd->nopartial = TRUE;
+       /* if (repeat_max != 1) cd->external_flags |= PCRE_NOPARTIAL; */
+       /*--------------------------------------------------------------------*/
        if (repeat_min == 0 && repeat_max == -1)
          *code++ = OP_CRSTAR + repeat_type;
-Line 3534 
 for (;; ptr++)
+Line 4579 
 for (;; ptr++)
        }
      /* If previous was a bracket group, we may have to replicate it in certain
-     cases. */
+     cases. Note that at this point we can encounter only the "basic" bracket
+     opcodes such as BRA and CBRA, as this is the place where they get converted
+     into the more special varieties such as BRAPOS and SBRA. A test for >=
+     OP_ASSERT and <= OP_COND includes ASSERT, ASSERT_NOT, ASSERTBACK,
+     ASSERTBACK_NOT, ONCE, BRA, CBRA, and COND. Originally, PCRE did not allow
+     repetition of assertions, but now it does, for Perl compatibility. */
-     else if (*previous == OP_BRA  || *previous == OP_CBRA ||
+     else if (*previous >= OP_ASSERT && *previous <= OP_COND)
-              *previous == OP_ONCE || *previous == OP_COND)
        {
        register int i;
-       int ketoffset = 0;
+       int len = (int)(code - previous);
-       int len = code - previous;
        uschar *bralink = NULL;
+       uschar *brazeroptr = NULL;
-       /* Repeating a DEFINE group is pointless */
+       /* Repeating a DEFINE group is pointless, but Perl allows the syntax, so
+       we just ignore the repeat. */
        if (*previous == OP_COND && previous[LINK_SIZE+1] == OP_DEF)
-         {
+         goto END_REPEAT;
-         *errorcodeptr = ERR55;
-         goto FAILED;
+       /* There is no sense in actually repeating assertions. The only potential
-         }
+       use of repetition is in cases when the assertion is optional. Therefore,
+       if the minimum is greater than zero, just ignore the repeat. If the
+       maximum is not not zero or one, set it to 1. */
-       /* If the maximum repeat count is unlimited, find the end of the bracket
+       if (*previous < OP_ONCE)    /* Assertion */
-       by scanning through from the start, and compute the offset back to it
+         {
-       from the current code pointer. There may be an OP_OPT setting following
+         if (repeat_min > 0) goto END_REPEAT;
-       the final KET, so we can't find the end just by going back from the code
+         if (repeat_max < 0 || repeat_max > 1) repeat_max = 1;
-       pointer. */
-       if (repeat_max == -1)
-         {
-         register uschar *ket = previous;
-         do ket += GET(ket, 1); while (*ket != OP_KET);
-         ketoffset = code - ket;
          }
        /* The case of a zero minimum is special because of the need to stick
-Line 3574 
 for (;; ptr++)
+Line 4619 
 for (;; ptr++)
        if (repeat_min == 0)
          {
-         /* If the maximum is also zero, we just omit the group from the output
+         /* If the maximum is also zero, we used to just omit the group from the
-         altogether. */
+         output altogether, like this:
-         if (repeat_max == 0)
-           {
-           code = previous;
-           goto END_REPEAT;
-           }
-         /* If the maximum is 1 or unlimited, we just have to stick in the
+         ** if (repeat_max == 0)
-         BRAZERO and do no more at this point. However, we do need to adjust
+         **   {
-         any OP_RECURSE calls inside the group that refer to the group itself or
+         **   code = previous;
-         any internal or forward referenced group, because the offset is from
+         **   goto END_REPEAT;
-         the start of the whole regex. Temporarily terminate the pattern while
+         **   }
-         doing this. */
+         However, that fails when a group or a subgroup within it is referenced
+         as a subroutine from elsewhere in the pattern, so now we stick in
+         OP_SKIPZERO in front of it so that it is skipped on execution. As we
+         don't have a list of which groups are referenced, we cannot do this
+         selectively.
+         If the maximum is 1 or unlimited, we just have to stick in the BRAZERO