/[pcre]/code/trunk/pcre_compile.c

Diff of /code/trunk/pcre_compile.c

Parent Directory | Revision Log | View Patch Patch

-revision 298 by ph10,
Thu Jan 10 17:09:12 2008 UTC
+revision 621 by ph10,
Mon Jul 18 10:14:09 2011 UTC
 Line 6
  and semantics are as close as possible to those of the Perl 5 language.
                         Written by Philip Hazel
-            Copyright (c) 1997-2007 University of Cambridge
+            Copyright (c) 1997-2011 University of Cambridge
  -----------------------------------------------------------------------------
  Redistribution and use in source and binary forms, with or without
 Line 53 
 supporting internal functions that are n
  #include "pcre_internal.h"
- /* When DEBUG is defined, we need the pcre_printint() function, which is also
+ /* When PCRE_DEBUG is defined, we need the pcre_printint() function, which is
- used by pcretest. DEBUG is not defined when building a production library. */
+ also used by pcretest. PCRE_DEBUG is not defined when building a production
+ library. */
- #ifdef DEBUG
+ #ifdef PCRE_DEBUG
  #include "pcre_printint.src"
  #endif
-Line 91 
 is 4 there is plenty of room. */
+Line 92 
 is 4 there is plenty of room. */
  #define COMPILE_WORK_SIZE (4096)
+ /* The overrun tests check for a slightly smaller size so that they detect the
+ overrun before it actually does run off the end of the data block. */
+ #define WORK_SIZE_CHECK (COMPILE_WORK_SIZE - 100)
  /* Table for handling escaped characters in the range '0'-'z'. Positive returns
  are simple data values; negative values are for special things like \d and so
  on. Zero means further processing is needed (for things like \x), or the escape
  is invalid. */
- #ifndef EBCDIC  /* This is the "normal" table for ASCII systems */
+ #ifndef EBCDIC
+ /* This is the "normal" table for ASCII systems or for EBCDIC systems running
+ in UTF-8 mode. */
  static const short int escapes[] = {
-,      0,      0,      0,      0,      0,      0,      0,   /* 0 - 7 */
+,                       0,
-,      0,    ':',    ';',    '<',    '=',    '>',    '?',   /* 8 - ? */
+,                       0,
-    '@', -ESC_A, -ESC_B, -ESC_C, -ESC_D, -ESC_E,      0, -ESC_G,   /* @ - G */
+,                       0,
- -ESC_H,      0,      0, -ESC_K,      0,      0,      0,      0,   /* H - O */
+,                       0,
- -ESC_P, -ESC_Q, -ESC_R, -ESC_S,      0,      0, -ESC_V, -ESC_W,   /* P - W */
+,                       0,
- -ESC_X,      0, -ESC_Z,    '[',   '\\',    ']',    '^',    '_',   /* X - _ */
+      CHAR_COLON,              CHAR_SEMICOLON,
-    '`',      7, -ESC_b,      0, -ESC_d,  ESC_e,  ESC_f,      0,   /* ` - g */
+      CHAR_LESS_THAN_SIGN,     CHAR_EQUALS_SIGN,
- -ESC_h,      0,      0, -ESC_k,      0,      0,  ESC_n,      0,   /* h - o */
+      CHAR_GREATER_THAN_SIGN,  CHAR_QUESTION_MARK,
- -ESC_p,      0,  ESC_r, -ESC_s,  ESC_tee,    0, -ESC_v, -ESC_w,   /* p - w */
+      CHAR_COMMERCIAL_AT,      -ESC_A,
-,      0, -ESC_z                                            /* x - z */
+      -ESC_B,                  -ESC_C,
+      -ESC_D,                  -ESC_E,
+,                       -ESC_G,
+      -ESC_H,                  0,
+,                       -ESC_K,
+,                       0,
+      -ESC_N,                  0,
+      -ESC_P,                  -ESC_Q,
+      -ESC_R,                  -ESC_S,
+,                       0,
+      -ESC_V,                  -ESC_W,
+      -ESC_X,                  0,
+      -ESC_Z,                  CHAR_LEFT_SQUARE_BRACKET,
+      CHAR_BACKSLASH,          CHAR_RIGHT_SQUARE_BRACKET,
+      CHAR_CIRCUMFLEX_ACCENT,  CHAR_UNDERSCORE,
+      CHAR_GRAVE_ACCENT,       7,
+      -ESC_b,                  0,
+      -ESC_d,                  ESC_e,
+      ESC_f,                   0,
+      -ESC_h,                  0,
+,                       -ESC_k,
+,                       0,
+      ESC_n,                   0,
+      -ESC_p,                  0,
+      ESC_r,                   -ESC_s,
+      ESC_tee,                 0,
+      -ESC_v,                  -ESC_w,
+,                       0,
+      -ESC_z
  };
- #else           /* This is the "abnormal" table for EBCDIC systems */
+ #else
+ /* This is the "abnormal" table for EBCDIC systems without UTF-8 support. */
  static const short int escapes[] = {
  /*  48 */     0,     0,      0,     '.',    '<',   '(',    '+',    '|',
  /*  50 */   '&',     0,      0,       0,      0,     0,      0,      0,
-Line 130 
 static const short int escapes[] = {
+Line 171 
 static const short int escapes[] = {
  /*  B8 */     0,     0,      0,       0,      0,   ']',    '=',    '-',
  /*  C0 */   '{',-ESC_A, -ESC_B,  -ESC_C, -ESC_D,-ESC_E,      0, -ESC_G,
  /*  C8 */-ESC_H,     0,      0,       0,      0,     0,      0,      0,
- /*  D0 */   '}',     0, -ESC_K,       0,      0,     0,      0, -ESC_P,
+ /*  D0 */   '}',     0, -ESC_K,       0,      0,-ESC_N,      0, -ESC_P,
  /*  D8 */-ESC_Q,-ESC_R,      0,       0,      0,     0,      0,      0,
  /*  E0 */  '\\',     0, -ESC_S,       0,      0,-ESC_V, -ESC_W, -ESC_X,
  /*  E8 */     0,-ESC_Z,      0,       0,      0,     0,      0,      0,
-Line 142 
 static const short int escapes[] = {
+Line 183 
 static const short int escapes[] = {
  /* Table of special "verbs" like (*PRUNE). This is a short table, so it is
  searched linearly. Put all the names into a single string, in order to reduce
- the number of relocations when a shared library is dynamically linked. */
+ the number of relocations when a shared library is dynamically linked. The
+ string is built from string macros so that it works in UTF-8 mode on EBCDIC
+ platforms. */
  typedef struct verbitem {
-   int   len;
+   int   len;                 /* Length of verb name */
-   int   op;
+   int   op;                  /* Op when no arg, or -1 if arg mandatory */
+   int   op_arg;              /* Op when arg present, or -1 if not allowed */
  } verbitem;
  static const char verbnames[] =
-   "ACCEPT\0"
+   "\0"                       /* Empty name is a shorthand for MARK */
-   "COMMIT\0"
+   STRING_MARK0
-   "F\0"
+   STRING_ACCEPT0
-   "FAIL\0"
+   STRING_COMMIT0
-   "PRUNE\0"
+   STRING_F0
-   "SKIP\0"
+   STRING_FAIL0
-   "THEN";
+   STRING_PRUNE0
+   STRING_SKIP0
- static verbitem verbs[] = {
+   STRING_THEN;
-   { 6, OP_ACCEPT },
-   { 6, OP_COMMIT },
+ static const verbitem verbs[] = {
-   { 1, OP_FAIL },
+   { 0, -1,        OP_MARK },
-   { 4, OP_FAIL },
+   { 4, -1,        OP_MARK },
-   { 5, OP_PRUNE },
+   { 6, OP_ACCEPT, -1 },
-   { 4, OP_SKIP  },
+   { 6, OP_COMMIT, -1 },
-   { 4, OP_THEN  }
+   { 1, OP_FAIL,   -1 },
+   { 4, OP_FAIL,   -1 },
+   { 5, OP_PRUNE,  OP_PRUNE_ARG },
+   { 4, OP_SKIP,   OP_SKIP_ARG  },
+   { 4, OP_THEN,   OP_THEN_ARG  }
  };
- static int verbcount = sizeof(verbs)/sizeof(verbitem);
+ static const int verbcount = sizeof(verbs)/sizeof(verbitem);
  /* Tables of names of POSIX character classes and their lengths. The names are
-Line 178 
 length entry. The first three must be al
+Line 226 
 length entry. The first three must be al
  for handling case independence. */
  static const char posix_names[] =
-   "alpha\0"  "lower\0"  "upper\0"  "alnum\0"  "ascii\0"  "blank\0"
+   STRING_alpha0 STRING_lower0 STRING_upper0 STRING_alnum0
-   "cntrl\0"  "digit\0"  "graph\0"  "print\0"  "punct\0"  "space\0"
+   STRING_ascii0 STRING_blank0 STRING_cntrl0 STRING_digit0
-   "word\0"   "xdigit";
+   STRING_graph0 STRING_print0 STRING_punct0 STRING_space0
+   STRING_word0  STRING_xdigit;
  static const uschar posix_name_lengths[] = {
 , 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 4, 6, 0 };
-Line 212 
 static const int posix_class_maps[] = {
+Line 261 
 static const int posix_class_maps[] = {
    cbit_xdigit,-1,          0              /* xdigit */
  };
+ /* Table of substitutes for \d etc when PCRE_UCP is set. The POSIX class
+ substitutes must be in the order of the names, defined above, and there are
+ both positive and negative cases. NULL means no substitute. */
+ #ifdef SUPPORT_UCP
+ static const uschar *substitutes[] = {
+   (uschar *)"\\P{Nd}",    /* \D */
+   (uschar *)"\\p{Nd}",    /* \d */
+   (uschar *)"\\P{Xsp}",   /* \S */       /* NOTE: Xsp is Perl space */
+   (uschar *)"\\p{Xsp}",   /* \s */
+   (uschar *)"\\P{Xwd}",   /* \W */
+   (uschar *)"\\p{Xwd}"    /* \w */
+ };
+ static const uschar *posix_substitutes[] = {
+   (uschar *)"\\p{L}",     /* alpha */
+   (uschar *)"\\p{Ll}",    /* lower */
+   (uschar *)"\\p{Lu}",    /* upper */
+   (uschar *)"\\p{Xan}",   /* alnum */
+   NULL,                   /* ascii */
+   (uschar *)"\\h",        /* blank */
+   NULL,                   /* cntrl */
+   (uschar *)"\\p{Nd}",    /* digit */
+   NULL,                   /* graph */
+   NULL,                   /* print */
+   NULL,                   /* punct */
+   (uschar *)"\\p{Xps}",   /* space */    /* NOTE: Xps is POSIX space */
+   (uschar *)"\\p{Xwd}",   /* word */
+   NULL,                   /* xdigit */
+   /* Negated cases */
+   (uschar *)"\\P{L}",     /* ^alpha */
+   (uschar *)"\\P{Ll}",    /* ^lower */
+   (uschar *)"\\P{Lu}",    /* ^upper */
+   (uschar *)"\\P{Xan}",   /* ^alnum */
+   NULL,                   /* ^ascii */
+   (uschar *)"\\H",        /* ^blank */
+   NULL,                   /* ^cntrl */
+   (uschar *)"\\P{Nd}",    /* ^digit */
+   NULL,                   /* ^graph */
+   NULL,                   /* ^print */
+   NULL,                   /* ^punct */
+   (uschar *)"\\P{Xps}",   /* ^space */   /* NOTE: Xps is POSIX space */
+   (uschar *)"\\P{Xwd}",   /* ^word */
+   NULL                    /* ^xdigit */
+ };
+ #define POSIX_SUBSIZE (sizeof(posix_substitutes)/sizeof(uschar *))
+ #endif
  #define STRING(a)  # a
  #define XSTRING(s) STRING(s)
-Line 224 
 the number of relocations needed when a
+Line 320 
 the number of relocations needed when a
  it is now one long string. We cannot use a table of offsets, because the
  lengths of inserts such as XSTRING(MAX_NAME_SIZE) are not known. Instead, we
  simply count through to the one we want - this isn't a performance issue
- because these strings are used only when there is a compilation error. */
+ because these strings are used only when there is a compilation error.
+ Each substring ends with \0 to insert a null character. This includes the final
+ substring, so that the whole string ends with \0\0, which can be detected when
+ counting through. */
  static const char error_texts[] =
    "no error\0"
-Line 271 
 static const char error_texts[] =
+Line 371 
 static const char error_texts[] =
    /* 35 */
    "invalid condition (?(0)\0"
    "\\C not allowed in lookbehind assertion\0"
-   "PCRE does not support \\L, \\l, \\N, \\U, or \\u\0"
+   "PCRE does not support \\L, \\l, \\N{name}, \\U, or \\u\0"
    "number after (?C is > 255\0"
    "closing ) for (?C expected\0"
    /* 40 */
-Line 295 
 static const char error_texts[] =
+Line 395 
 static const char error_texts[] =
    /* 55 */
    "repeating a DEFINE group is not allowed\0"
    "inconsistent NEWLINE options\0"
-   "\\g is not followed by a braced name or an optionally braced non-zero number\0"
+   "\\g is not followed by a braced, angle-bracketed, or quoted name/number or by a plain number\0"
-   "(?+ or (?- or (?(+ or (?(- must be followed by a non-zero number\0"
+   "a numbered reference must not be zero\0"
-   "(*VERB) with an argument is not supported\0"
+   "an argument is not allowed for (*ACCEPT), (*FAIL), or (*COMMIT)\0"
    /* 60 */
    "(*VERB) not recognized\0"
    "number is too big\0"
    "subpattern name expected\0"
-   "digit expected after (?+";
+   "digit expected after (?+\0"
+   "] is an invalid data character in JavaScript compatibility mode\0"
+   /* 65 */
+   "different names for subpatterns of the same number are not allowed\0"
+   "(*MARK) must have an argument\0"
+   "this version of PCRE is not compiled with PCRE_UCP support\0"
+   "\\c must be followed by an ASCII character\0"
+   ;
  /* Table to identify digits and hex digits. This is used when compiling
  patterns. Note that the tables in chartables are dependent on the locale, and
-Line 321 
 For convenience, we use the same bit def
+Line 427 
 For convenience, we use the same bit def
  Then we can use ctype_digit and ctype_xdigit in the code. */
- #ifndef EBCDIC  /* This is the "normal" case, for ASCII systems */
+ #ifndef EBCDIC
+ /* This is the "normal" case, for ASCII systems, and EBCDIC systems running in
+ UTF-8 mode. */
  static const unsigned char digitab[] =
    {
 x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*   0-  7 */
-Line 357 
 static const unsigned char digitab[] =
+Line 467 
 static const unsigned char digitab[] =
 x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 240-247 */
 x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};/* 248-255 */
- #else           /* This is the "abnormal" case, for EBCDIC systems */
+ #else
+ /* This is the "abnormal" case, for EBCDIC systems not running in UTF-8 mode. */
  static const unsigned char digitab[] =
    {
 x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*   0-  7  0 */
-Line 432 
 static const unsigned char ebcdic_charta
+Line 545 
 static const unsigned char ebcdic_charta
  /* Definition to allow mutual recursion */
  static BOOL
-   compile_regex(int, int, uschar **, const uschar **, int *, BOOL, BOOL, int,
+   compile_regex(int, uschar **, const uschar **, int *, BOOL, BOOL, int, int *,
-     int *, int *, branch_chain *, compile_data *, int *);
+     int *, branch_chain *, compile_data *, int *);
-Line 454 
 static const char *
+Line 567 
 static const char *
  find_error_text(int n)
  {
  const char *s = error_texts;
- for (; n > 0; n--) while (*s++ != 0);
+ for (; n > 0; n--)
+   {
+   while (*s++ != 0) {};
+   if (*s == 0) return "Error text not found (please report)";
+   }
  return s;
  }
-Line 502 
 if (c == 0) *errorcodeptr = ERR1;
+Line 619 
 if (c == 0) *errorcodeptr = ERR1;
  in a table. A non-zero result is something that can be returned immediately.
  Otherwise further processing may be required. */
- #ifndef EBCDIC  /* ASCII coding */
+ #ifndef EBCDIC  /* ASCII/UTF-8 coding */
- else if (c < '0' || c > 'z') {}                           /* Not alphanumeric */
+ else if (c < CHAR_0 || c > CHAR_z) {}                     /* Not alphanumeric */
- else if ((i = escapes[c - '0']) != 0) c = i;
+ else if ((i = escapes[c - CHAR_0]) != 0) c = i;
  #else           /* EBCDIC coding */
  else if (c < 'a' || (ebcdic_chartab[c] & 0x0E) == 0) {}   /* Not alphanumeric */
-Line 523 
 else
+Line 640 
 else
      /* A number of Perl escapes are not handled by PCRE. We give an explicit
      error. */
-     case 'l':
+     case CHAR_l:
-     case 'L':
+     case CHAR_L:
-     case 'N':
+     case CHAR_u:
-     case 'u':
+     case CHAR_U:
-     case 'U':
      *errorcodeptr = ERR37;
      break;
-     /* \g must be followed by a number, either plain or braced. If positive, it
+     /* \g must be followed by one of a number of specific things:
-     is an absolute backreference. If negative, it is a relative backreference.
-     This is a Perl 5.10 feature. Perl 5.10 also supports \g{name} as a
+     (1) A number, either plain or braced. If positive, it is an absolute
-     reference to a named group. This is part of Perl's movement towards a
+     backreference. If negative, it is a relative backreference. This is a Perl
-     unified syntax for back references. As this is synonymous with \k{name}, we
+.10 feature.
-     fudge it up by pretending it really was \k. */
+     (2) Perl 5.10 also supports \g{name} as a reference to a named group. This
+     is part of Perl's movement towards a unified syntax for back references. As
+     this is synonymous with \k{name}, we fudge it up by pretending it really
+     was \k.
+     (3) For Oniguruma compatibility we also support \g followed by a name or a
+     number either in angle brackets or in single quotes. However, these are
+     (possibly recursive) subroutine calls, _not_ backreferences. Just return
+     the -ESC_g code (cf \k). */
-     case 'g':
+     case CHAR_g:
-     if (ptr[1] == '{')
+     if (ptr[1] == CHAR_LESS_THAN_SIGN || ptr[1] == CHAR_APOSTROPHE)
+       {
+       c = -ESC_g;
+       break;
+       }
+     /* Handle the Perl-compatible cases */
+     if (ptr[1] == CHAR_LEFT_CURLY_BRACKET)
        {
        const uschar *p;
-       for (p = ptr+2; *p != 0 && *p != '}'; p++)
+       for (p = ptr+2; *p != 0 && *p != CHAR_RIGHT_CURLY_BRACKET; p++)
-         if (*p != '-' && (digitab[*p] & ctype_digit) == 0) break;
+         if (*p != CHAR_MINUS && (digitab[*p] & ctype_digit) == 0) break;
-       if (*p != 0 && *p != '}')
+       if (*p != 0 && *p != CHAR_RIGHT_CURLY_BRACKET)
          {
          c = -ESC_k;
          break;
-Line 554 
 else
+Line 687 
 else
        }
      else braced = FALSE;
-     if (ptr[1] == '-')
+     if (ptr[1] == CHAR_MINUS)
        {
        negated = TRUE;
        ptr++;
-Line 563 
 else
+Line 696 
 else
      c = 0;
      while ((digitab[ptr[1]] & ctype_digit) != 0)
-       c = c * 10 + *(++ptr) - '0';
+       c = c * 10 + *(++ptr) - CHAR_0;
-     if (c < 0)
+     if (c < 0)   /* Integer overflow */
        {
        *errorcodeptr = ERR61;
        break;
        }
-     if (c == 0 || (braced && *(++ptr) != '}'))
+     if (braced && *(++ptr) != CHAR_RIGHT_CURLY_BRACKET)
        {
        *errorcodeptr = ERR57;
        break;
        }
+     if (c == 0)
+       {
+       *errorcodeptr = ERR58;
+       break;
+       }
      if (negated)
        {
        if (c > bracount)
-Line 602 
 else
+Line 741 
 else
      value is greater than 377, the least significant 8 bits are taken. Inside a
      character class, \ followed by a digit is always an octal number. */
-     case '1': case '2': case '3': case '4': case '5':
+     case CHAR_1: case CHAR_2: case CHAR_3: case CHAR_4: case CHAR_5:
-     case '6': case '7': case '8': case '9':
+     case CHAR_6: case CHAR_7: case CHAR_8: case CHAR_9:
      if (!isclass)
        {
        oldptr = ptr;
-       c -= '0';
+       c -= CHAR_0;
        while ((digitab[ptr[1]] & ctype_digit) != 0)
-         c = c * 10 + *(++ptr) - '0';
+         c = c * 10 + *(++ptr) - CHAR_0;
-       if (c < 0)
+       if (c < 0)    /* Integer overflow */
          {
          *errorcodeptr = ERR61;
          break;
-Line 628 
 else
+Line 767 
 else
      generates a binary zero byte and treats the digit as a following literal.
      Thus we have to pull back the pointer by one. */
-     if ((c = *ptr) >= '8')
+     if ((c = *ptr) >= CHAR_8)
        {
        ptr--;
        c = 0;
-Line 641 
 else
+Line 780 
 else
      to do). Nowadays we allow for larger numbers in UTF-8 mode, but no more
      than 3 octal digits. */
-     case '0':
+     case CHAR_0:
-     c -= '0';
+     c -= CHAR_0;
-     while(i++ < 2 && ptr[1] >= '0' && ptr[1] <= '7')
+     while(i++ < 2 && ptr[1] >= CHAR_0 && ptr[1] <= CHAR_7)
-         c = c * 8 + *(++ptr) - '0';
+         c = c * 8 + *(++ptr) - CHAR_0;
      if (!utf8 && c > 255) *errorcodeptr = ERR51;
      break;
-Line 652 
 else
+Line 791 
 else
      than 0xff in utf8 mode, but only if the ddd are hex digits. If not, { is
      treated as a data character. */
-     case 'x':
+     case CHAR_x:
-     if (ptr[1] == '{')
+     if (ptr[1] == CHAR_LEFT_CURLY_BRACKET)
        {
        const uschar *pt = ptr + 2;
        int count = 0;
-Line 662 
 else
+Line 801 
 else
        while ((digitab[*pt] & ctype_xdigit) != 0)
          {
          register int cc = *pt++;
-         if (c == 0 && cc == '0') continue;     /* Leading zeroes */
+         if (c == 0 && cc == CHAR_0) continue;     /* Leading zeroes */
          count++;
- #ifndef EBCDIC  /* ASCII coding */
+ #ifndef EBCDIC  /* ASCII/UTF-8 coding */
-         if (cc >= 'a') cc -= 32;               /* Convert to upper case */
+         if (cc >= CHAR_a) cc -= 32;               /* Convert to upper case */
-         c = (c << 4) + cc - ((cc < 'A')? '0' : ('A' - 10));
+         c = (c << 4) + cc - ((cc < CHAR_A)? CHAR_0 : (CHAR_A - 10));
  #else           /* EBCDIC coding */
-         if (cc >= 'a' && cc <= 'z') cc += 64;  /* Convert to upper case */
+         if (cc >= CHAR_a && cc <= CHAR_z) cc += 64;  /* Convert to upper case */
-         c = (c << 4) + cc - ((cc >= '0')? '0' : ('A' - 10));
+         c = (c << 4) + cc - ((cc >= CHAR_0)? CHAR_0 : (CHAR_A - 10));
  #endif
          }
-       if (*pt == '}')
+       if (*pt == CHAR_RIGHT_CURLY_BRACKET)
          {
          if (c < 0 || count > (utf8? 8 : 2)) *errorcodeptr = ERR34;
          ptr = pt;
-Line 690 
 else
+Line 829 
 else
      c = 0;
      while (i++ < 2 && (digitab[ptr[1]] & ctype_xdigit) != 0)
        {
-       int cc;                               /* Some compilers don't like ++ */
+       int cc;                                  /* Some compilers don't like */
-       cc = *(++ptr);                        /* in initializers */
+       cc = *(++ptr);                           /* ++ in initializers */
- #ifndef EBCDIC  /* ASCII coding */
+ #ifndef EBCDIC  /* ASCII/UTF-8 coding */
-       if (cc >= 'a') cc -= 32;              /* Convert to upper case */
+       if (cc >= CHAR_a) cc -= 32;              /* Convert to upper case */
-       c = c * 16 + cc - ((cc < 'A')? '0' : ('A' - 10));
+       c = c * 16 + cc - ((cc < CHAR_A)? CHAR_0 : (CHAR_A - 10));
  #else           /* EBCDIC coding */
-       if (cc <= 'z') cc += 64;              /* Convert to upper case */
+       if (cc <= CHAR_z) cc += 64;              /* Convert to upper case */
-       c = c * 16 + cc - ((cc >= '0')? '0' : ('A' - 10));
+       c = c * 16 + cc - ((cc >= CHAR_0)? CHAR_0 : (CHAR_A - 10));
  #endif
        }
      break;
      /* For \c, a following letter is upper-cased; then the 0x40 bit is flipped.
-     This coding is ASCII-specific, but then the whole concept of \cx is
+     An error is given if the byte following \c is not an ASCII character. This
+     coding is ASCII-specific, but then the whole concept of \cx is
      ASCII-specific. (However, an EBCDIC equivalent has now been added.) */
-     case 'c':
+     case CHAR_c:
      c = *(++ptr);
      if (c == 0)
        {
        *errorcodeptr = ERR2;
        break;
        }
+ #ifndef EBCDIC    /* ASCII/UTF-8 coding */
- #ifndef EBCDIC  /* ASCII coding */
+     if (c > 127)  /* Excludes all non-ASCII in either mode */
-     if (c >= 'a' && c <= 'z') c -= 32;
+       {
+       *errorcodeptr = ERR68;
+       break;
+       }
+     if (c >= CHAR_a && c <= CHAR_z) c -= 32;
      c ^= 0x40;
- #else           /* EBCDIC coding */
+ #else             /* EBCDIC coding */
-     if (c >= 'a' && c <= 'z') c += 64;
+     if (c >= CHAR_a && c <= CHAR_z) c += 64;
      c ^= 0xC0;
  #endif
      break;
-Line 740 
 else
+Line 884 
 else
      }
    }
+ /* Perl supports \N{name} for character names, as well as plain \N for "not
+ newline". PCRE does not support \N{name}. */
+ if (c == -ESC_N && ptr[1] == CHAR_LEFT_CURLY_BRACKET)
+   *errorcodeptr = ERR37;
+ /* If PCRE_UCP is set, we change the values for \d etc. */
+ if ((options & PCRE_UCP) != 0 && c <= -ESC_D && c >= -ESC_w)
+   c -= (ESC_DU - ESC_D);
+ /* Set the pointer to the final character before returning. */
  *ptrptr = ptr;
  return c;
  }
-Line 780 
 if (c == 0) goto ERROR_RETURN;
+Line 937 
 if (c == 0) goto ERROR_RETURN;
  /* \P or \p can be followed by a name in {}, optionally preceded by ^ for
  negation. */
- if (c == '{')
+ if (c == CHAR_LEFT_CURLY_BRACKET)
    {
-   if (ptr[1] == '^')
+   if (ptr[1] == CHAR_CIRCUMFLEX_ACCENT)
      {
      *negptr = TRUE;
      ptr++;
-Line 791 
 if (c == '{')
+Line 948 
 if (c == '{')
      {
      c = *(++ptr);
      if (c == 0) goto ERROR_RETURN;
-     if (c == '}') break;
+     if (c == CHAR_RIGHT_CURLY_BRACKET) break;
      name[i] = c;
      }
-   if (c !='}') goto ERROR_RETURN;
+   if (c != CHAR_RIGHT_CURLY_BRACKET) goto ERROR_RETURN;
    name[i] = 0;
    }
-Line 859 
 is_counted_repeat(const uschar *p)
+Line 1016 
 is_counted_repeat(const uschar *p)
  {
  if ((digitab[*p++] & ctype_digit) == 0) return FALSE;
  while ((digitab[*p] & ctype_digit) != 0) p++;
- if (*p == '}') return TRUE;
+ if (*p == CHAR_RIGHT_CURLY_BRACKET) return TRUE;
- if (*p++ != ',') return FALSE;
+ if (*p++ != CHAR_COMMA) return FALSE;
- if (*p == '}') return TRUE;
+ if (*p == CHAR_RIGHT_CURLY_BRACKET) return TRUE;
  if ((digitab[*p++] & ctype_digit) == 0) return FALSE;
  while ((digitab[*p] & ctype_digit) != 0) p++;
- return (*p == '}');
+ return (*p == CHAR_RIGHT_CURLY_BRACKET);
  }
-Line 900 
 int max = -1;
+Line 1057 
 int max = -1;
  /* Read the minimum value and do a paranoid check: a negative value indicates
  an integer overflow. */
- while ((digitab[*p] & ctype_digit) != 0) min = min * 10 + *p++ - '0';
+ while ((digitab[*p] & ctype_digit) != 0) min = min * 10 + *p++ - CHAR_0;
  if (min < 0 || min > 65535)
    {
    *errorcodeptr = ERR5;
-Line 910 
 if (min < 0 || min > 65535)
+Line 1067 
 if (min < 0 || min > 65535)
  /* Read the maximum value if there is one, and again do a paranoid on its size.
  Also, max must not be less than min. */
- if (*p == '}') max = min; else
+ if (*p == CHAR_RIGHT_CURLY_BRACKET) max = min; else
    {
-   if (*(++p) != '}')
+   if (*(++p) != CHAR_RIGHT_CURLY_BRACKET)
      {
      max = 0;
-     while((digitab[*p] & ctype_digit) != 0) max = max * 10 + *p++ - '0';
+     while((digitab[*p] & ctype_digit) != 0) max = max * 10 + *p++ - CHAR_0;
      if (max < 0 || max > 65535)
        {
        *errorcodeptr = ERR5;
-Line 940 
 return p;
+Line 1097 
 return p;
  /*************************************************
- *       Find forward referenced subpattern       *
+ *  Subroutine for finding forward reference      *
  *************************************************/
- /* This function scans along a pattern's text looking for capturing
+ /* This recursive function is called only from find_parens() below. The
+ top-level call starts at the beginning of the pattern. All other calls must
+ start at a parenthesis. It scans along a pattern's text looking for capturing
  subpatterns, and counting them. If it finds a named pattern that matches the
  name it is given, it returns its number. Alternatively, if the name is NULL, it
- returns when it reaches a given numbered subpattern. This is used for forward
+ returns when it reaches a given numbered subpattern. Recursion is used to keep
- references to subpatterns. We know that if (?P< is encountered, the name will
+ track of subpatterns that reset the capturing group numbers - the (?| feature.
- be terminated by '>' because that is checked in the first pass.
+ This function was originally called only from the second pass, in which we know
+ that if (?< or (?' or (?P< is encountered, the name will be correctly
+ terminated because that is checked in the first pass. There is now one call to
+ this function in the first pass, to check for a recursive back reference by
+ name (so that we can make the whole group atomic). In this case, we need check
+ only up to the current position in the pattern, and that is still OK because
+ and previous occurrences will have been checked. To make this work, the test
+ for "end of pattern" is a check against cd->end_pattern in the main loop,
+ instead of looking for a binary zero. This means that the special first-pass
+ call can adjust cd->end_pattern temporarily. (Checks for binary zero while
+ processing items within the loop are OK, because afterwards the main loop will
+ terminate.)
  Arguments:
-   ptr          current position in the pattern
+   ptrptr       address of the current character pointer (updated)
-   count        current count of capturing parens so far encountered
+   cd           compile background data
    name         name to seek, or NULL if seeking a numbered subpattern
    lorn         name length, or subpattern number if name is NULL
    xmode        TRUE if we are in /x mode
+   utf8         TRUE if we are in UTF-8 mode
+   count        pointer to the current capturing subpattern number (updated)
  Returns:       the number of the named subpattern, or -1 if not found
  */
  static int
- find_parens(const uschar *ptr, int count, const uschar *name, int lorn,
+ find_parens_sub(uschar **ptrptr, compile_data *cd, const uschar *name, int lorn,
-   BOOL xmode)
+   BOOL xmode, BOOL utf8, int *count)
  {
- const uschar *thisname;
+ uschar *ptr = *ptrptr;
+ int start_count = *count;
+ int hwm_count = start_count;
+ BOOL dup_parens = FALSE;
- for (; *ptr != 0; ptr++)
+ /* If the first character is a parenthesis, check on the type of group we are
+ dealing with. The very first call may not start with a parenthesis. */
+ if (ptr[0] == CHAR_LEFT_PARENTHESIS)
    {
-   int term;
+   /* Handle specials such as (*SKIP) or (*UTF8) etc. */
+   if (ptr[1] == CHAR_ASTERISK) ptr += 2;
+   /* Handle a normal, unnamed capturing parenthesis. */
+   else if (ptr[1] != CHAR_QUESTION_MARK)
+     {
+     *count += 1;
+     if (name == NULL && *count == lorn) return *count;
+     ptr++;
+     }
+   /* All cases now have (? at the start. Remember when we are in a group
+   where the parenthesis numbers are duplicated. */
+   else if (ptr[2] == CHAR_VERTICAL_LINE)
+     {
+     ptr += 3;
+     dup_parens = TRUE;
+     }
+   /* Handle comments; all characters are allowed until a ket is reached. */
+   else if (ptr[2] == CHAR_NUMBER_SIGN)
+     {
+     for (ptr += 3; *ptr != 0; ptr++) if (*ptr == CHAR_RIGHT_PARENTHESIS) break;
+     goto FAIL_EXIT;
+     }
+   /* Handle a condition. If it is an assertion, just carry on so that it
+   is processed as normal. If not, skip to the closing parenthesis of the
+   condition (there can't be any nested parens). */
+   else if (ptr[2] == CHAR_LEFT_PARENTHESIS)
+     {
+     ptr += 2;
+     if (ptr[1] != CHAR_QUESTION_MARK)
+       {
+       while (*ptr != 0 && *ptr != CHAR_RIGHT_PARENTHESIS) ptr++;
+       if (*ptr != 0) ptr++;
+       }
+     }
+   /* Start with (? but not a condition. */
+   else
+     {
+     ptr += 2;
+     if (*ptr == CHAR_P) ptr++;                      /* Allow optional P */
+     /* We have to disambiguate (?<! and (?<= from (?<name> for named groups */
+     if ((*ptr == CHAR_LESS_THAN_SIGN && ptr[1] != CHAR_EXCLAMATION_MARK &&
+         ptr[1] != CHAR_EQUALS_SIGN) || *ptr == CHAR_APOSTROPHE)
+       {
+       int term;
+       const uschar *thisname;
+       *count += 1;
+       if (name == NULL && *count == lorn) return *count;
+       term = *ptr++;
+       if (term == CHAR_LESS_THAN_SIGN) term = CHAR_GREATER_THAN_SIGN;
+       thisname = ptr;
+       while (*ptr != term) ptr++;
+       if (name != NULL && lorn == ptr - thisname &&
+           strncmp((const char *)name, (const char *)thisname, lorn) == 0)
+         return *count;
+       term++;
+       }
+     }
+   }
+ /* Past any initial parenthesis handling, scan for parentheses or vertical
+ bars. Stop if we get to cd->end_pattern. Note that this is important for the
+ first-pass call when this value is temporarily adjusted to stop at the current
+ position. So DO NOT change this to a test for binary zero. */
+ for (; ptr < cd->end_pattern; ptr++)
+   {
    /* Skip over backslashed characters and also entire \Q...\E */
-   if (*ptr == '\\')
+   if (*ptr == CHAR_BACKSLASH)
      {
-     if (*(++ptr) == 0) return -1;
+     if (*(++ptr) == 0) goto FAIL_EXIT;
-     if (*ptr == 'Q') for (;;)
+     if (*ptr == CHAR_Q) for (;;)
        {
-       while (*(++ptr) != 0 && *ptr != '\\');
+       while (*(++ptr) != 0 && *ptr != CHAR_BACKSLASH) {};
-       if (*ptr == 0) return -1;
+       if (*ptr == 0) goto FAIL_EXIT;
-       if (*(++ptr) == 'E') break;
+       if (*(++ptr) == CHAR_E) break;
        }
      continue;
      }
-   /* Skip over character classes */
+   /* Skip over character classes; this logic must be similar to the way they
+   are handled for real. If the first character is '^', skip it. Also, if the
+   first few characters (either before or after ^) are \Q\E or \E we skip them
+   too. This makes for compatibility with Perl. Note the use of STR macros to
+   encode "Q\\E" so that it works in UTF-8 on EBCDIC platforms. */
-   if (*ptr == '[')
+   if (*ptr == CHAR_LEFT_SQUARE_BRACKET)
      {
-     while (*(++ptr) != ']')
+     BOOL negate_class = FALSE;
+     for (;;)
+       {
+       if (ptr[1] == CHAR_BACKSLASH)
+         {
+         if (ptr[2] == CHAR_E)
+           ptr+= 2;
+         else if (strncmp((const char *)ptr+2,
+                  STR_Q STR_BACKSLASH STR_E, 3) == 0)
+           ptr += 4;
+         else
+           break;
+         }
+       else if (!negate_class && ptr[1] == CHAR_CIRCUMFLEX_ACCENT)
+         {
+         negate_class = TRUE;
+         ptr++;
+         }
+       else break;
+       }
+     /* If the next character is ']', it is a data character that must be
+     skipped, except in JavaScript compatibility mode. */
+     if (ptr[1] == CHAR_RIGHT_SQUARE_BRACKET &&
+         (cd->external_options & PCRE_JAVASCRIPT_COMPAT) == 0)
+       ptr++;
+     while (*(++ptr) != CHAR_RIGHT_SQUARE_BRACKET)
        {
        if (*ptr == 0) return -1;
-       if (*ptr == '\\')
+       if (*ptr == CHAR_BACKSLASH)
          {
-         if (*(++ptr) == 0) return -1;
+         if (*(++ptr) == 0) goto FAIL_EXIT;
-         if (*ptr == 'Q') for (;;)
+         if (*ptr == CHAR_Q) for (;;)
            {
-           while (*(++ptr) != 0 && *ptr != '\\');
+           while (*(++ptr) != 0 && *ptr != CHAR_BACKSLASH) {};
-           if (*ptr == 0) return -1;
+           if (*ptr == 0) goto FAIL_EXIT;
-           if (*(++ptr) == 'E') break;
+           if (*(++ptr) == CHAR_E) break;
            }
          continue;
          }
-Line 1008 
 for (; *ptr != 0; ptr++)
+Line 1296 
 for (; *ptr != 0; ptr++)
    /* Skip comments in /x mode */
-   if (xmode && *ptr == '#')
+   if (xmode && *ptr == CHAR_NUMBER_SIGN)
      {
-     while (*(++ptr) != 0 && *ptr != '\n');
+     ptr++;
-     if (*ptr == 0) return -1;
+     while (*ptr != 0)
+       {
+       if (IS_NEWLINE(ptr)) { ptr += cd->nllen - 1; break; }
+       ptr++;
+ #ifdef SUPPORT_UTF8
+       if (utf8) while ((*ptr & 0xc0) == 0x80) ptr++;
+ #endif
+       }
+     if (*ptr == 0) goto FAIL_EXIT;
      continue;
      }
-   /* An opening parens must now be a real metacharacter */
+   /* Check for the special metacharacters */
-   if (*ptr != '(') continue;
+   if (*ptr == CHAR_LEFT_PARENTHESIS)
-   if (ptr[1] != '?' && ptr[1] != '*')
      {
-     count++;
+     int rc = find_parens_sub(&ptr, cd, name, lorn, xmode, utf8, count);
-     if (name == NULL && count == lorn) return count;
+     if (rc > 0) return rc;
-     continue;
+     if (*ptr == 0) goto FAIL_EXIT;
      }
-   ptr += 2;
+   else if (*ptr == CHAR_RIGHT_PARENTHESIS)
-   if (*ptr == 'P') ptr++;                      /* Allow optional P */
+     {
+     if (dup_parens && *count < hwm_count) *count = hwm_count;
+     goto FAIL_EXIT;
+     }
-   /* We have to disambiguate (?<! and (?<= from (?<name> */
+   else if (*ptr == CHAR_VERTICAL_LINE && dup_parens)
+     {
+     if (*count > hwm_count) hwm_count = *count;
+     *count = start_count;
+     }
+   }
-   if ((*ptr != '<' || ptr[1] == '!' || ptr[1] == '=') &&
+ FAIL_EXIT:
-        *ptr != '\'')
+ *ptrptr = ptr;
-     continue;
+ return -1;
+ }
+ /*************************************************
+ *       Find forward referenced subpattern       *
+ *************************************************/
+ /* This function scans along a pattern's text looking for capturing
+ subpatterns, and counting them. If it finds a named pattern that matches the
+ name it is given, it returns its number. Alternatively, if the name is NULL, it
+ returns when it reaches a given numbered subpattern. This is used for forward
+ references to subpatterns. We used to be able to start this scan from the
+ current compiling point, using the current count value from cd->bracount, and
+ do it all in a single loop, but the addition of the possibility of duplicate
+ subpattern numbers means that we have to scan from the very start, in order to
+ take account of such duplicates, and to use a recursive function to keep track
+ of the different types of group.
-   count++;
+ Arguments:
+   cd           compile background data
+   name         name to seek, or NULL if seeking a numbered subpattern
+   lorn         name length, or subpattern number if name is NULL
+   xmode        TRUE if we are in /x mode
+   utf8         TRUE if we are in UTF-8 mode
+ Returns:       the number of the found subpattern, or -1 if not found
+ */
-   if (name == NULL && count == lorn) return count;
+ static int
-   term = *ptr++;
+ find_parens(compile_data *cd, const uschar *name, int lorn, BOOL xmode,
-   if (term == '<') term = '>';
+   BOOL utf8)
-   thisname = ptr;
+ {
-   while (*ptr != term) ptr++;
+ uschar *ptr = (uschar *)cd->start_pattern;
-   if (name != NULL && lorn == ptr - thisname &&
+ int count = 0;
-       strncmp((const char *)name, (const char *)thisname, lorn) == 0)
+ int rc;
-     return count;
+ /* If the pattern does not start with an opening parenthesis, the first call
+ to find_parens_sub() will scan right to the end (if necessary). However, if it
+ does start with a parenthesis, find_parens_sub() will return when it hits the
+ matching closing parens. That is why we have to have a loop. */
+ for (;;)
+   {
+   rc = find_parens_sub(&ptr, cd, name, lorn, xmode, utf8, &count);
+   if (rc > 0 || *ptr++ == 0) break;
    }
- return -1;
+ return rc;
  }
  /*************************************************
  *      Find first significant op code            *
  *************************************************/
  /* This is called by several functions that scan a compiled expression looking
  for a fixed first character, or an anchoring op code etc. It skips over things
- that do not influence this. For some calls, a change of option is important.
+ that do not influence this. For some calls, it makes sense to skip negative
- For some calls, it makes sense to skip negative forward and all backward
+ forward and all backward assertions, and also the \b assertion; for others it
- assertions, and also the \b assertion; for others it does not.
+ does not.
  Arguments:
    code         pointer to the start of the group
-   options      pointer to external options
-   optbit       the option bit whose changing is significant, or
-                  zero if none are
    skipassert   TRUE if certain assertions are to be skipped
  Returns:       pointer to the first significant opcode
  */
  static const uschar*
- first_significant_code(const uschar *code, int *options, int optbit,
+ first_significant_code(const uschar *code, BOOL skipassert)
-   BOOL skipassert)
  {
  for (;;)
    {
    switch ((int)*code)
      {
-     case OP_OPT:
-     if (optbit > 0 && ((int)code[1] & optbit) != (*options & optbit))
-       *options = (int)code[1];
-     code += 2;
-     break;
      case OP_ASSERT_NOT:
      case OP_ASSERTBACK:
      case OP_ASSERTBACK_NOT:
-Line 1100 
 for (;;)
+Line 1430 
 for (;;)
      case OP_CALLOUT:
      case OP_CREF:
+     case OP_NCREF:
      case OP_RREF:
+     case OP_NRREF:
      case OP_DEF:
      code += _pcre_OP_lengths[*code];
      break;
-Line 1116 
 for (;;)
+Line 1448 
 for (;;)
  /*************************************************
- *        Find the fixed length of a pattern      *
+ *        Find the fixed length of a branch       *
  *************************************************/
- /* Scan a pattern and compute the fixed length of subject that will match it,
+ /* Scan a branch and compute the fixed length of subject that will match it,
  if the length is fixed. This is needed for dealing with backward assertions.
- In UTF8 mode, the result is in characters rather than bytes.
+ In UTF8 mode, the result is in characters rather than bytes. The branch is
+ temporarily terminated with OP_END when this function is called.
+ This function is called when a backward assertion is encountered, so that if it
+ fails, the error message can point to the correct place in the pattern.
+ However, we cannot do this when the assertion contains subroutine calls,
+ because they can be forward references. We solve this by remembering this case
+ and doing the check at the end; a flag specifies which mode we are running in.
  Arguments:
    code     points to the start of the pattern (the bracket)
-   options  the compiling options
+   utf8     TRUE in UTF-8 mode
+   atend    TRUE if called when the pattern is complete
+   cd       the "compile data" structure
- Returns:   the fixed length, or -1 if there is no fixed length,
+ Returns:   the fixed length,
+              or -1 if there is no fixed length,
               or -2 if \C was encountered
+              or -3 if an OP_RECURSE item was encountered and atend is FALSE
  */
  static int
- find_fixedlength(uschar *code, int options)
+ find_fixedlength(uschar *code, BOOL utf8, BOOL atend, compile_data *cd)
  {
  int length = -1;
-Line 1145 
 branch, check the length against that of
+Line 1488 
 branch, check the length against that of
  for (;;)
    {
    int d;
+   uschar *ce, *cs;
    register int op = *cc;
    switch (op)
      {
+     /* We only need to continue for OP_CBRA (normal capturing bracket) and
+     OP_BRA (normal non-capturing bracket) because the other variants of these
+     opcodes are all concerned with unlimited repeated groups, which of course
+     are not of fixed length. They will cause a -1 response from the default
+     case of this switch. */
      case OP_CBRA:
      case OP_BRA:
      case OP_ONCE:
      case OP_COND:
-     d = find_fixedlength(cc + ((op == OP_CBRA)? 2:0), options);
+     d = find_fixedlength(cc + ((op == OP_CBRA)? 2:0), utf8, atend, cd);
      if (d < 0) return d;
      branchlength += d;
      do cc += GET(cc, 1); while (*cc == OP_ALT);
-Line 1161 
 for (;;)
+Line 1511 
 for (;;)
      /* Reached end of a branch; if it's a ket it is the end of a nested
      call. If it's ALT it is an alternation in a nested call. If it is
-     END it's the end of the outer call. All can be handled by the same code. */
+     END it's the end of the outer call. All can be handled by the same code.
+     Note that we must not include the OP_KETRxxx opcodes here, because they
+     all imply an unlimited repeat. */
      case OP_ALT:
      case OP_KET:
-     case OP_KETRMAX:
-     case OP_KETRMIN:
      case OP_END:
      if (length < 0) length = branchlength;
        else if (length != branchlength) return -1;
-Line 1175 
 for (;;)
+Line 1525 
 for (;;)
      branchlength = 0;
      break;
+     /* A true recursion implies not fixed length, but a subroutine call may
+     be OK. If the subroutine is a forward reference, we can't deal with
+     it until the end of the pattern, so return -3. */
+     case OP_RECURSE:
+     if (!atend) return -3;
+     cs = ce = (uschar *)cd->start_code + GET(cc, 1);  /* Start subpattern */
+     do ce += GET(ce, 1); while (*ce == OP_ALT);       /* End subpattern */
+     if (cc > cs && cc < ce) return -1;                /* Recursion */
+     d = find_fixedlength(cs + 2, utf8, atend, cd);
+     if (d < 0) return d;
+     branchlength += d;
+     cc += 1 + LINK_SIZE;
+     break;
      /* Skip over assertive subpatterns */
      case OP_ASSERT:
-Line 1188 
 for (;;)
+Line 1553 
 for (;;)
      case OP_REVERSE:
      case OP_CREF:
+     case OP_NCREF:
      case OP_RREF:
+     case OP_NRREF:
      case OP_DEF:
-     case OP_OPT:
      case OP_CALLOUT:
      case OP_SOD:
      case OP_SOM:
+     case OP_SET_SOM:
      case OP_EOD:
      case OP_EODN:
      case OP_CIRC:
+     case OP_CIRCM:
      case OP_DOLL:
+     case OP_DOLLM:
      case OP_NOT_WORD_BOUNDARY:
      case OP_WORD_BOUNDARY:
      cc += _pcre_OP_lengths[*cc];
-Line 1206 
 for (;;)
+Line 1575 
 for (;;)
      /* Handle literal characters */
      case OP_CHAR:
-     case OP_CHARNC:
+     case OP_CHARI:
      case OP_NOT:
+     case OP_NOTI:
      branchlength++;
      cc += 2;
  #ifdef SUPPORT_UTF8
-     if ((options & PCRE_UTF8) != 0)
+     if (utf8 && cc[-1] >= 0xc0) cc += _pcre_utf8_table4[cc[-1] & 0x3f];
-       {
-       while ((*cc & 0xc0) == 0x80) cc++;
-       }
  #endif
      break;
-Line 1225 
 for (;;)
+Line 1592 
 for (;;)
      branchlength += GET2(cc,1);
      cc += 4;
  #ifdef SUPPORT_UTF8
-     if ((options & PCRE_UTF8) != 0)
+     if (utf8 && cc[-1] >= 0xc0) cc += _pcre_utf8_table4[cc[-1] & 0x3f];
-       {
-       while((*cc & 0x80) == 0x80) cc++;
-       }
  #endif
      break;
-Line 1252 
 for (;;)
+Line 1616 
 for (;;)
      case OP_NOT_WORDCHAR:
      case OP_WORDCHAR:
      case OP_ANY:
+     case OP_ALLANY:
      branchlength++;
      cc++;
      break;
-Line 1306 
 for (;;)
+Line 1671 
 for (;;)
  /*************************************************
- *    Scan compiled regex for numbered bracket    *
+ *    Scan compiled regex for specific bracket    *
  *************************************************/
  /* This little function scans through a compiled pattern until it finds a
- capturing bracket with the given number.
+ capturing bracket with the given number, or, if the number is negative, an
+ instance of OP_REVERSE for a lookbehind. The function is global in the C sense
+ so that it can be called from pcre_study() when finding the minimum matching
+ length.
  Arguments:
    code        points to start of expression
    utf8        TRUE in UTF-8 mode
-   number      the required bracket number
+   number      the required bracket number or negative to find a lookbehind
  Returns:      pointer to the opcode for the bracket, or NULL if not found
  */
- static const uschar *
+ const uschar *
- find_bracket(const uschar *code, BOOL utf8, int number)
+ _pcre_find_bracket(const uschar *code, BOOL utf8, int number)
  {
  for (;;)
    {
    register int c = *code;
    if (c == OP_END) return NULL;
    /* XCLASS is used for classes that cannot be represented just by a bit
-Line 1334 
 for (;;)
+Line 1703 
 for (;;)
    if (c == OP_XCLASS) code += GET(code, 1);
+   /* Handle recursion */
+   else if (c == OP_REVERSE)
+     {
+     if (number < 0) return (uschar *)code;
+     code += _pcre_OP_lengths[c];
+     }
    /* Handle capturing bracket */
-   else if (c == OP_CBRA)
+   else if (c == OP_CBRA || c == OP_SCBRA ||
+            c == OP_CBRAPOS || c == OP_SCBRAPOS)
      {
      int n = GET2(code, 1+LINK_SIZE);
      if (n == number) return (uschar *)code;
-Line 1345 
 for (;;)
+Line 1723 
 for (;;)
    /* Otherwise, we can get the item's length from the table, except that for
    repeated character types, we have to test for \p and \P, which have an extra
-   two bytes of parameters. */
+   two bytes of parameters, and for MARK/PRUNE/SKIP/THEN with an argument, we
+   must add in its length. */
    else
      {
-Line 1369 
 for (;;)
+Line 1748 
 for (;;)
        case OP_TYPEPOSUPTO:
        if (code[3] == OP_PROP || code[3] == OP_NOTPROP) code += 2;
        break;
+       case OP_MARK:
+       case OP_PRUNE_ARG:
+       case OP_SKIP_ARG:
+       code += code[1];
+       break;
+       case OP_THEN_ARG:
+       code += code[1+LINK_SIZE];
+       break;
        }
      /* Add in the fixed length from the table */
-Line 1383 
 for (;;)
+Line 1772 
 for (;;)
      if (utf8) switch(c)
        {
        case OP_CHAR:
-       case OP_CHARNC:
+       case OP_CHARI:
        case OP_EXACT:
+       case OP_EXACTI:
        case OP_UPTO:
+       case OP_UPTOI:
        case OP_MINUPTO:
+       case OP_MINUPTOI:
        case OP_POSUPTO:
+       case OP_POSUPTOI:
        case OP_STAR:
+       case OP_STARI:
        case OP_MINSTAR:
+       case OP_MINSTARI:
        case OP_POSSTAR:
+       case OP_POSSTARI:
        case OP_PLUS:
+       case OP_PLUSI:
        case OP_MINPLUS:
+       case OP_MINPLUSI:
        case OP_POSPLUS:
+       case OP_POSPLUSI:
        case OP_QUERY:
+       case OP_QUERYI:
        case OP_MINQUERY:
+       case OP_MINQUERYI:
        case OP_POSQUERY:
+       case OP_POSQUERYI:
        if (code[-1] >= 0xc0) code += _pcre_utf8_table4[code[-1] & 0x3f];
        break;
        }
+ #else
+     (void)(utf8);  /* Keep compiler happy by referencing function argument */
  #endif
      }
    }
-Line 1438 
 for (;;)
+Line 1842 
 for (;;)
    /* Otherwise, we can get the item's length from the table, except that for
    repeated character types, we have to test for \p and \P, which have an extra
-   two bytes of parameters. */
+   two bytes of parameters, and for MARK/PRUNE/SKIP/THEN with an argument, we
+   must add in its length. */
    else
      {
-Line 1462 
 for (;;)
+Line 1867 
 for (;;)
        case OP_TYPEEXACT:
        if (code[3] == OP_PROP || code[3] == OP_NOTPROP) code += 2;
        break;
+       case OP_MARK:
+       case OP_PRUNE_ARG:
+       case OP_SKIP_ARG:
+       code += code[1];
+       break;
+       case OP_THEN_ARG:
+       code += code[1+LINK_SIZE];
+       break;
        }
      /* Add in the fixed length from the table */
-Line 1476 
 for (;;)
+Line 1891 
 for (;;)
      if (utf8) switch(c)
        {
        case OP_CHAR:
-       case OP_CHARNC:
+       case OP_CHARI:
        case OP_EXACT:
+       case OP_EXACTI:
        case OP_UPTO:
+       case OP_UPTOI:
        case OP_MINUPTO:
+       case OP_MINUPTOI:
        case OP_POSUPTO:
+       case OP_POSUPTOI:
        case OP_STAR:
+       case OP_STARI:
        case OP_MINSTAR:
+       case OP_MINSTARI:
        case OP_POSSTAR:
+       case OP_POSSTARI:
        case OP_PLUS:
+       case OP_PLUSI:
        case OP_MINPLUS:
+       case OP_MINPLUSI:
        case OP_POSPLUS:
+       case OP_POSPLUSI:
        case OP_QUERY:
+       case OP_QUERYI:
        case OP_MINQUERY:
+       case OP_MINQUERYI:
        case OP_POSQUERY:
+       case OP_POSQUERYI:
        if (code[-1] >= 0xc0) code += _pcre_utf8_table4[code[-1] & 0x3f];
        break;
        }
+ #else
+     (void)(utf8);  /* Keep compiler happy by referencing function argument */
  #endif
      }
    }
-Line 1516 
 Arguments:
+Line 1946 
 Arguments:
    code        points to start of search
    endcode     points to where to stop
    utf8        TRUE if in UTF8 mode
+   cd          contains pointers to tables etc.
  Returns:      TRUE if what is matched could be empty
  */
  static BOOL
- could_be_empty_branch(const uschar *code, const uschar *endcode, BOOL utf8)
+ could_be_empty_branch(const uschar *code, const uschar *endcode, BOOL utf8,
+   compile_data *cd)
  {
  register int c;
- for (code = first_significant_code(code + _pcre_OP_lengths[*code], NULL, 0, TRUE);
+ for (code = first_significant_code(code + _pcre_OP_lengths[*code], TRUE);
       code < endcode;
-      code = first_significant_code(code + _pcre_OP_lengths[c], NULL, 0, TRUE))
+      code = first_significant_code(code + _pcre_OP_lengths[c], TRUE))
    {
    const uschar *ccode;
-Line 1542 
 for (code = first_significant_code(code
+Line 1974 
 for (code = first_significant_code(code
      continue;
      }
+   /* For a recursion/subroutine call, if its end has been reached, which
+   implies a subroutine call, we can scan it. */
+   if (c == OP_RECURSE)
+     {
+     BOOL empty_branch = FALSE;
+     const uschar *scode = cd->start_code + GET(code, 1);
+     if (GET(scode, 1) == 0) return TRUE;    /* Unclosed */
+     do
+       {
+       if (could_be_empty_branch(scode, endcode, utf8, cd))
+         {
+         empty_branch = TRUE;
+         break;
+         }
+       scode += GET(scode, 1);
+       }
+     while (*scode == OP_ALT);
+     if (!empty_branch) return FALSE;  /* All branches are non-empty */
+     continue;
+     }
    /* Groups with zero repeats can of course be empty; skip them. */
-   if (c == OP_BRAZERO || c == OP_BRAMINZERO)
+   if (c == OP_BRAZERO || c == OP_BRAMINZERO || c == OP_SKIPZERO ||
+       c == OP_BRAPOSZERO)
      {
      code += _pcre_OP_lengths[c];
      do code += GET(code, 1); while (*code == OP_ALT);
-Line 1552 
 for (code = first_significant_code(code
+Line 2007 
 for (code = first_significant_code(code
      continue;
      }
+   /* A nested group that is already marked as "could be empty" can just be
+   skipped. */
+   if (c == OP_SBRA  || c == OP_SBRAPOS ||
+       c == OP_SCBRA || c == OP_SCBRAPOS)
+     {
+     do code += GET(code, 1); while (*code == OP_ALT);
+     c = *code;
+     continue;
+     }
    /* For other groups, scan the branches. */
-   if (c == OP_BRA || c == OP_CBRA || c == OP_ONCE || c == OP_COND)
+   if (c == OP_BRA  || c == OP_BRAPOS ||
+       c == OP_CBRA || c == OP_CBRAPOS ||
+       c == OP_ONCE || c == OP_COND)
      {
      BOOL empty_branch;
      if (GET(code, 1) == 0) return TRUE;    /* Hit unclosed bracket */
-     /* Scan a closed bracket */
+     /* If a conditional group has only one branch, there is a second, implied,
+     empty branch, so just skip over the conditional, because it could be empty.
+     Otherwise, scan the individual branches of the group. */
-     empty_branch = FALSE;
+     if (c == OP_COND && code[GET(code, 1)] != OP_ALT)
-     do
-       {
-       if (!empty_branch && could_be_empty_branch(code, endcode, utf8))
-         empty_branch = TRUE;
        code += GET(code, 1);
+     else
+       {
+       empty_branch = FALSE;
+       do
+         {
+         if (!empty_branch && could_be_empty_branch(code, endcode, utf8, cd))
+           empty_branch = TRUE;
+         code += GET(code, 1);
+         }
+       while (*code == OP_ALT);
+       if (!empty_branch) return FALSE;   /* All branches are non-empty */
        }
-     while (*code == OP_ALT);
-     if (!empty_branch) return FALSE;   /* All branches are non-empty */
      c = *code;
      continue;
      }
-Line 1630 
 for (code = first_significant_code(code
+Line 2106 
 for (code = first_significant_code(code
      case OP_NOT_WORDCHAR:
      case OP_WORDCHAR:
      case OP_ANY:
+     case OP_ALLANY:
      case OP_ANYBYTE:
      case OP_CHAR:
-     case OP_CHARNC:
+     case OP_CHARI:
      case OP_NOT:
+     case OP_NOTI:
      case OP_PLUS:
      case OP_MINPLUS:
      case OP_POSPLUS:
-Line 1673 
 for (code = first_significant_code(code
+Line 2151 
 for (code = first_significant_code(code
      case OP_KET:
      case OP_KETRMAX:
      case OP_KETRMIN:
+     case OP_KETRPOS:
      case OP_ALT:
      return TRUE;
-Line 1681 
 for (code = first_significant_code(code
+Line 2160 
 for (code = first_significant_code(code
  #ifdef SUPPORT_UTF8
      case OP_STAR:
+     case OP_STARI:
      case OP_MINSTAR:
+     case OP_MINSTARI:
      case OP_POSSTAR:
+     case OP_POSSTARI:
      case OP_QUERY:
+     case OP_QUERYI:
      case OP_MINQUERY:
+     case OP_MINQUERYI:
      case OP_POSQUERY:
+     case OP_POSQUERYI:
+     if (utf8 && code[1] >= 0xc0) code += _pcre_utf8_table4[code[1] & 0x3f];
+     break;
      case OP_UPTO:
+     case OP_UPTOI:
      case OP_MINUPTO:
+     case OP_MINUPTOI:
      case OP_POSUPTO:
-     if (utf8) while ((code[2] & 0xc0) == 0x80) code++;
+     case OP_POSUPTOI:
+     if (utf8 && code[3] >= 0xc0) code += _pcre_utf8_table4[code[3] & 0x3f];
      break;
  #endif
+     /* MARK, and PRUNE/SKIP/THEN with an argument must skip over the argument
+     string. */
+     case OP_MARK:
+     case OP_PRUNE_ARG:
+     case OP_SKIP_ARG:
+     code += code[1];
+     break;
+     case OP_THEN_ARG:
+     code += code[1+LINK_SIZE];
+     break;
+     /* None of the remaining opcodes are required to match a character. */
+     default:
+     break;
      }
    }
-Line 1714 
 Arguments:
+Line 2223 
 Arguments:
    endcode     points to where to stop (current RECURSE item)
    bcptr       points to the chain of current (unclosed) branch starts
    utf8        TRUE if in UTF-8 mode
+   cd          pointers to tables etc
  Returns:      TRUE if what is matched could be empty
  */
  static BOOL
  could_be_empty(const uschar *code, const uschar *endcode, branch_chain *bcptr,
-   BOOL utf8)
+   BOOL utf8, compile_data *cd)
  {
- while (bcptr != NULL && bcptr->current >= code)
+ while (bcptr != NULL && bcptr->current_branch >= code)
    {
-   if (!could_be_empty_branch(bcptr->current, endcode, utf8)) return FALSE;
+   if (!could_be_empty_branch(bcptr->current_branch, endcode, utf8, cd))
+     return FALSE;
    bcptr = bcptr->outer;
    }
  return TRUE;
-Line 1770 
 int terminator;          /* Don't combin
+Line 2281 
 int terminator;          /* Don't combin
  terminator = *(++ptr);   /* compiler warns about "non-constant" initializer. */
  for (++ptr; *ptr != 0; ptr++)
    {
-   if (*ptr == '\\' && ptr[1] == ']') ptr++; else
+   if (*ptr == CHAR_BACKSLASH && ptr[1] == CHAR_RIGHT_SQUARE_BRACKET) ptr++; else
      {
-     if (*ptr == ']') return FALSE;
+     if (*ptr == CHAR_RIGHT_SQUARE_BRACKET) return FALSE;
-     if (*ptr == terminator && ptr[1] == ']')
+     if (*ptr == terminator && ptr[1] == CHAR_RIGHT_SQUARE_BRACKET)
        {
        *endptr = ptr;
        return TRUE;
-Line 1824 
 return -1;
+Line 2335 
 return -1;
  that is referenced. This means that groups can be replicated for fixed
  repetition simply by copying (because the recursion is allowed to refer to
  earlier groups that are outside the current group). However, when a group is
- optional (i.e. the minimum quantifier is zero), OP_BRAZERO is inserted before
+ optional (i.e. the minimum quantifier is zero), OP_BRAZERO or OP_SKIPZERO is
- it, after it has been compiled. This means that any OP_RECURSE items within it
+ inserted before it, after it has been compiled. This means that any OP_RECURSE
- that refer to the group itself or any contained groups have to have their
+ items within it that refer to the group itself or any contained groups have to
- offsets adjusted. That one of the jobs of this function. Before it is called,
+ have their offsets adjusted. That one of the jobs of this function. Before it
- the partially compiled regex must be temporarily terminated with OP_END.
+ is called, the partially compiled regex must be temporarily terminated with
+ OP_END.
  This function has been extended with the possibility of forward references for
  recursions and subroutine calls. It must also check the list of such references
-Line 1905 
 auto_callout(uschar *code, const uschar
+Line 2417 
 auto_callout(uschar *code, const uschar
  {
  *code++ = OP_CALLOUT;
  *code++ = 255;
- PUT(code, 0, ptr - cd->start_pattern);  /* Pattern offset */
+ PUT(code, 0, (int)(ptr - cd->start_pattern));  /* Pattern offset */
- PUT(code, LINK_SIZE, 0);                /* Default length */
+ PUT(code, LINK_SIZE, 0);                       /* Default length */
  return code + 2*LINK_SIZE;
  }
-Line 1931 
 Returns:             nothing
+Line 2443 
 Returns:             nothing
  static void
  complete_callout(uschar *previous_callout, const uschar *ptr, compile_data *cd)
  {
- int length = ptr - cd->start_pattern - GET(previous_callout, 2);
+ int length = (int)(ptr - cd->start_pattern - GET(previous_callout, 2));
  PUT(previous_callout, 2 + LINK_SIZE, length);
  }
-Line 1963 
 get_othercase_range(unsigned int *cptr,
+Line 2475 
 get_othercase_range(unsigned int *cptr,
  unsigned int c, othercase, next;
  for (c = *cptr; c <= d; c++)
-   { if ((othercase = _pcre_ucp_othercase(c)) != NOTACHAR) break; }
+   { if ((othercase = UCD_OTHERCASE(c)) != c) break; }
  if (c > d) return FALSE;
-Line 1972 
 next = othercase + 1;
+Line 2484 
 next = othercase + 1;
  for (++c; c <= d; c++)
    {
-   if (_pcre_ucp_othercase(c) != next) break;
+   if (UCD_OTHERCASE(c) != next) break;
    next++;
    }
-Line 1981 
 for (++c; c <= d; c++)
+Line 2493 
 for (++c; c <= d; c++)
  return TRUE;
  }
+ /*************************************************
+ *        Check a character and a property        *
+ *************************************************/
+ /* This function is called by check_auto_possessive() when a property item
+ is adjacent to a fixed character.
+ Arguments:
+   c            the character
+   ptype        the property type
+   pdata        the data for the type
+   negated      TRUE if it's a negated property (\P or \p{^)
+ Returns:       TRUE if auto-possessifying is OK
+ */
+ static BOOL
+ check_char_prop(int c, int ptype, int pdata, BOOL negated)
+ {
+ const ucd_record *prop = GET_UCD(c);
+ switch(ptype)
+   {
+   case PT_LAMP:
+   return (prop->chartype == ucp_Lu ||
+           prop->chartype == ucp_Ll ||
+           prop->chartype == ucp_Lt) == negated;
+   case PT_GC:
+   return (pdata == _pcre_ucp_gentype[prop->chartype]) == negated;
+   case PT_PC:
+   return (pdata == prop->chartype) == negated;
+   case PT_SC:
+   return (pdata == prop->script) == negated;
+   /* These are specials */
+   case PT_ALNUM:
+   return (_pcre_ucp_gentype[prop->chartype] == ucp_L ||
+           _pcre_ucp_gentype[prop->chartype] == ucp_N) == negated;
+   case PT_SPACE:    /* Perl space */
+   return (_pcre_ucp_gentype[prop->chartype] == ucp_Z ||
+           c == CHAR_HT || c == CHAR_NL || c == CHAR_FF || c == CHAR_CR)
+           == negated;
+   case PT_PXSPACE:  /* POSIX space */
+   return (_pcre_ucp_gentype[prop->chartype] == ucp_Z ||
+           c == CHAR_HT || c == CHAR_NL || c == CHAR_VT ||
+           c == CHAR_FF || c == CHAR_CR)
+           == negated;
+   case PT_WORD:
+   return (_pcre_ucp_gentype[prop->chartype] == ucp_L ||
+           _pcre_ucp_gentype[prop->chartype] == ucp_N ||
+           c == CHAR_UNDERSCORE) == negated;
+   }
+ return FALSE;
+ }
  #endif  /* SUPPORT_UCP */
-Line 1994 
 whether the next thing could possibly ma
+Line 2569 
 whether the next thing could possibly ma
  sense to automatically possessify the repeated item.
  Arguments:
-   op_code       the repeated op code
+   previous      pointer to the repeated opcode
-   this          data for this item, depends on the opcode
    utf8          TRUE in UTF-8 mode
-   utf8_char     used for utf8 character bytes, NULL if not relevant
    ptr           next character in pattern
    options       options bits
    cd            contains pointers to tables etc.
-Line 2006 
 Returns:        TRUE if possessifying is
+Line 2579 
 Returns:        TRUE if possessifying is
  */
  static BOOL
- check_auto_possessive(int op_code, int item, BOOL utf8, uschar *utf8_char,
+ check_auto_possessive(const uschar *previous, BOOL utf8, const uschar *ptr,
-   const uschar *ptr, int options, compile_data *cd)
+   int options, compile_data *cd)
  {
- int next;
+ int c, next;
+ int op_code = *previous++;
  /* Skip whitespace and comments in extended mode */
-Line 2018 
 if ((options & PCRE_EXTENDED) != 0)
+Line 2592 
 if ((options & PCRE_EXTENDED) != 0)
    for (;;)
      {
      while ((cd->ctypes[*ptr] & ctype_space) != 0) ptr++;
-     if (*ptr == '#')
+     if (*ptr == CHAR_NUMBER_SIGN)
        {
-       while (*(++ptr) != 0)
+       ptr++;
+       while (*ptr != 0)
+         {
          if (IS_NEWLINE(ptr)) { ptr += cd->nllen; break; }
+         ptr++;
+ #ifdef SUPPORT_UTF8
+         if (utf8) while ((*ptr & 0xc0) == 0x80) ptr++;
+ #endif
+         }
        }
      else break;
      }
-Line 2030 
 if ((options & PCRE_EXTENDED) != 0)
+Line 2611 
 if ((options & PCRE_EXTENDED) != 0)
  /* If the next item is one that we can handle, get its value. A non-negative
  value is a character, a negative value is an escape value. */
- if (*ptr == '\\')
+ if (*ptr == CHAR_BACKSLASH)
    {
    int temperrorcode = 0;
    next = check_escape(&ptr, &temperrorcode, cd->bracount, options, FALSE);
-Line 2055 
 if ((options & PCRE_EXTENDED) != 0)
+Line 2636 
 if ((options & PCRE_EXTENDED) != 0)
    for (;;)
      {
      while ((cd->ctypes[*ptr] & ctype_space) != 0) ptr++;
-     if (*ptr == '#')
+     if (*ptr == CHAR_NUMBER_SIGN)
        {
-       while (*(++ptr) != 0)
+       ptr++;
+       while (*ptr != 0)
+         {
          if (IS_NEWLINE(ptr)) { ptr += cd->nllen; break; }
+         ptr++;
+ #ifdef SUPPORT_UTF8
+         if (utf8) while ((*ptr & 0xc0) == 0x80) ptr++;
+ #endif
+         }
        }
      else break;
      }
-Line 2066 
 if ((options & PCRE_EXTENDED) != 0)
+Line 2654 
 if ((options & PCRE_EXTENDED) != 0)
  /* If the next thing is itself optional, we have to give up. */
- if (*ptr == '*' || *ptr == '?' || strncmp((char *)ptr, "{0,", 3) == 0)
+ if (*ptr == CHAR_ASTERISK || *ptr == CHAR_QUESTION_MARK ||
-   return FALSE;
+   strncmp((char *)ptr, STR_LEFT_CURLY_BRACKET STR_0 STR_COMMA, 3) == 0)
+     return FALSE;
- /* Now compare the next item with the previous opcode. If the previous is a
- positive single character match, "item" either contains the character or, if
- "item" is greater than 127 in utf8 mode, the character's bytes are in
- utf8_char. */
- /* Handle cases when the next item is a character. */
+ /* Now compare the next item with the previous opcode. First, handle cases when
+ the next item is a character. */
  if (next >= 0) switch(op_code)
    {
    case OP_CHAR:
  #ifdef SUPPORT_UTF8
-   if (utf8 && item > 127) { GETCHAR(item, utf8_char); }
+   GETCHARTEST(c, previous);
+ #else
+   c = *previous;
  #endif
-   return item != next;
+   return c != next;
-   /* For CHARNC (caseless character) we must check the other case. If we have
+   /* For CHARI (caseless character) we must check the other case. If we have
    Unicode property support, we can use it to test the other case of
    high-valued characters. */
-   case OP_CHARNC:
+   case OP_CHARI:
  #ifdef SUPPORT_UTF8
-   if (utf8 && item > 127) { GETCHAR(item, utf8_char); }
+   GETCHARTEST(c, previous);
+ #else
+   c = *previous;
  #endif
-   if (item == next) return FALSE;
+   if (c == next) return FALSE;
  #ifdef SUPPORT_UTF8
    if (utf8)
      {
      unsigned int othercase;
      if (next < 128) othercase = cd->fcc[next]; else
  #ifdef SUPPORT_UCP
-     othercase = _pcre_ucp_othercase((unsigned int)next);
+     othercase = UCD_OTHERCASE((unsigned int)next);
  #else
      othercase = NOTACHAR;
  #endif
-     return (unsigned int)item != othercase;
+     return (unsigned int)c != othercase;
      }
    else
  #endif  /* SUPPORT_UTF8 */
-   return (item != cd->fcc[next]);  /* Non-UTF-8 mode */
+   return (c != cd->fcc[next]);  /* Non-UTF-8 mode */
-   /* For OP_NOT, "item" must be a single-byte character. */
+   /* For OP_NOT and OP_NOTI, the data is always a single-byte character. These
+   opcodes are not used for multi-byte characters, because they are coded using
+   an XCLASS instead. */
    case OP_NOT:
-   if (next < 0) return FALSE;  /* Not a character */
+   return (c = *previous) == next;
-   if (item == next) return TRUE;
-   if ((options & PCRE_CASELESS) == 0) return FALSE;
+   case OP_NOTI:
+   if ((c = *previous) == next) return TRUE;
  #ifdef SUPPORT_UTF8
    if (utf8)
      {
      unsigned int othercase;
      if (next < 128) othercase = cd->fcc[next]; else
  #ifdef SUPPORT_UCP
-     othercase = _pcre_ucp_othercase(next);
+     othercase = UCD_OTHERCASE(next);
  #else
      othercase = NOTACHAR;
  #endif
-     return (unsigned int)item == othercase;
+     return (unsigned int)c == othercase;
      }
    else
  #endif  /* SUPPORT_UTF8 */
-   return (item == cd->fcc[next]);  /* Non-UTF-8 mode */
+   return (c == cd->fcc[next]);  /* Non-UTF-8 mode */
+   /* Note that OP_DIGIT etc. are generated only when PCRE_UCP is *not* set.
+   When it is set, \d etc. are converted into OP_(NOT_)PROP codes. */
    case OP_DIGIT:
    return next > 127 || (cd->ctypes[next] & ctype_digit) == 0;
-Line 2173 
 if (next >= 0) switch(op_code)
+Line 2767 
 if (next >= 0) switch(op_code)
      case 0x202f:
      case 0x205f:
      case 0x3000:
-     return op_code != OP_HSPACE;
+     return op_code == OP_NOT_HSPACE;
      default:
-     return op_code == OP_HSPACE;
+     return op_code != OP_NOT_HSPACE;
      }
+   case OP_ANYNL:
    case OP_VSPACE:
    case OP_NOT_VSPACE:
    switch(next)
-Line 2189 
 if (next >= 0) switch(op_code)
+Line 2784 
 if (next >= 0) switch(op_code)
      case 0x85:
      case 0x2028:
      case 0x2029:
-     return op_code != OP_VSPACE;
+     return op_code == OP_NOT_VSPACE;
      default:
-     return op_code == OP_VSPACE;
+     return op_code != OP_NOT_VSPACE;
      }
+ #ifdef SUPPORT_UCP
+   case OP_PROP:
+   return check_char_prop(next, previous[0], previous[1], FALSE);
+   case OP_NOTPROP:
+   return check_char_prop(next, previous[0], previous[1], TRUE);
+ #endif
    default:
    return FALSE;
    }
- /* Handle the case when the next item is \d, \s, etc. */
+ /* Handle the case when the next item is \d, \s, etc. Note that when PCRE_UCP
+ is set, \d turns into ESC_du rather than ESC_d, etc., so ESC_d etc. are
+ generated only when PCRE_UCP is *not* set, that is, when only ASCII
+ characteristics are recognized. Similarly, the opcodes OP_DIGIT etc. are
+ replaced by OP_PROP codes when PCRE_UCP is set. */
  switch(op_code)
    {
    case OP_CHAR:
-   case OP_CHARNC:
+   case OP_CHARI:
  #ifdef SUPPORT_UTF8
-   if (utf8 && item > 127) { GETCHAR(item, utf8_char); }
+   GETCHARTEST(c, previous);
+ #else
+   c = *previous;
  #endif
    switch(-next)
      {
      case ESC_d:
-     return item > 127 || (cd->ctypes[item] & ctype_digit) == 0;
+     return c > 127 || (cd->ctypes[c] & ctype_digit) == 0;
      case ESC_D:
-     return item <= 127 && (cd->ctypes[item] & ctype_digit) != 0;
+     return c <= 127 && (cd->ctypes[c] & ctype_digit) != 0;
      case ESC_s:
-     return item > 127 || (cd->ctypes[item] & ctype_space) == 0;
+     return c > 127 || (cd->ctypes[c] & ctype_space) == 0;
      case ESC_S:
-     return item <= 127 && (cd->ctypes[item] & ctype_space) != 0;
+     return c <= 127 && (cd->ctypes[c] & ctype_space) != 0;
      case ESC_w:
-     return item > 127 || (cd->ctypes[item] & ctype_word) == 0;
+     return c > 127 || (cd->ctypes[c] & ctype_word) == 0;
      case ESC_W:
-     return item <= 127 && (cd->ctypes[item] & ctype_word) != 0;
+     return c <= 127 && (cd->ctypes[c] & ctype_word) != 0;
      case ESC_h:
      case ESC_H:
-     switch(item)
+     switch(c)
        {
        case 0x09:
        case 0x20:
-Line 2258 
 switch(op_code)
+Line 2867 
 switch(op_code)
      case ESC_v:
      case ESC_V:
-     switch(item)
+     switch(c)
        {
        case 0x0a:
        case 0x0b:
-Line 2272 
 switch(op_code)
+Line 2881 
 switch(op_code)
        return -next == ESC_v;
        }
+     /* When PCRE_UCP is set, these values get generated for \d etc. Find
+     their substitutions and process them. The result will always be either
+     -ESC_p or -ESC_P. Then fall through to process those values. */
+ #ifdef SUPPORT_UCP
+     case ESC_du:
+     case ESC_DU:
+     case ESC_wu:
+     case ESC_WU:
+     case ESC_su:
+     case ESC_SU:
+       {
+       int temperrorcode = 0;
+       ptr = substitutes[-next - ESC_DU];
+       next = check_escape(&ptr, &temperrorcode, 0, options, FALSE);
+       if (temperrorcode != 0) return FALSE;
+       ptr++;    /* For compatibility */
+       }
+     /* Fall through */
+     case ESC_p:
+     case ESC_P:
+       {
+       int ptype, pdata, errorcodeptr;
+       BOOL negated;
+       ptr--;      /* Make ptr point at the p or P */
+       ptype = get_ucp(&ptr, &negated, &pdata, &errorcodeptr);
+       if (ptype < 0) return FALSE;
+       ptr++;      /* Point past the final curly ket */
+       /* If the property item is optional, we have to give up. (When generated
+       from \d etc by PCRE_UCP, this test will have been applied much earlier,
+       to the original \d etc. At this point, ptr will point to a zero byte. */
+       if (*ptr == CHAR_ASTERISK || *ptr == CHAR_QUESTION_MARK ||
+         strncmp((char *)ptr, STR_LEFT_CURLY_BRACKET STR_0 STR_COMMA, 3) == 0)
+           return FALSE;
+       /* Do the property check. */
+       return check_char_prop(c, ptype, pdata, (next == -ESC_P) != negated);
+       }
+ #endif
      default:
      return FALSE;
      }
+   /* In principle, support for Unicode properties should be integrated here as
+   well. It means re-organizing the above code so as to get hold of the property
+   values before switching on the op-code. However, I wonder how many patterns
+   combine ASCII \d etc with Unicode properties? (Note that if PCRE_UCP is set,
+   these op-codes are never generated.) */
    case OP_DIGIT:
    return next == -ESC_D || next == -ESC_s || next == -ESC_W ||
-          next == -ESC_h || next == -ESC_v;
+          next == -ESC_h || next == -ESC_v || next == -ESC_R;
    case OP_NOT_DIGIT:
    return next == -ESC_d;
    case OP_WHITESPACE:
-   return next == -ESC_S || next == -ESC_d || next == -ESC_w;
+   return next == -ESC_S || next == -ESC_d || next == -ESC_w || next == -ESC_R;
    case OP_NOT_WHITESPACE:
    return next == -ESC_s || next == -ESC_h || next == -ESC_v;
    case OP_HSPACE:
-   return next == -ESC_S || next == -ESC_H || next == -ESC_d || next == -ESC_w;
+   return next == -ESC_S || next == -ESC_H || next == -ESC_d ||
+          next == -ESC_w || next == -ESC_v || next == -ESC_R;
    case OP_NOT_HSPACE:
    return next == -ESC_h;
    /* Can't have \S in here because VT matches \S (Perl anomaly) */
+   case OP_ANYNL:
    case OP_VSPACE:
    return next == -ESC_V || next == -ESC_d || next == -ESC_w;
    case OP_NOT_VSPACE:
-   return next == -ESC_v;
+   return next == -ESC_v || next == -ESC_R;
    case OP_WORDCHAR:
-   return next == -ESC_W || next == -ESC_s || next == -ESC_h || next == -ESC_v;
+   return next == -ESC_W || next == -ESC_s || next == -ESC_h ||
+          next == -ESC_v || next == -ESC_R;
    case OP_NOT_WORDCHAR:
    return next == -ESC_w || next == -ESC_d;
-Line 2367 
 BOOL inescq = FALSE;
+Line 3030 
 BOOL inescq = FALSE;
  BOOL groupsetfirstbyte = FALSE;
  const uschar *ptr = *ptrptr;
  const uschar *tempptr;
+ const uschar *nestptr = NULL;
  uschar *previous = NULL;
  uschar *previous_callout = NULL;
  uschar *save_hwm = NULL;
-Line 2376 
 uschar classbits[32];
+Line 3040 
 uschar classbits[32];
  BOOL class_utf8;
  BOOL utf8 = (options & PCRE_UTF8) != 0;
  uschar *class_utf8data;
+ uschar *class_utf8data_base;
  uschar utf8_char[6];
  #else
  BOOL utf8 = FALSE;
  uschar *utf8_char = NULL;
  #endif
- #ifdef DEBUG
+ #ifdef PCRE_DEBUG
  if (lengthptr != NULL) DPRINTF((">> start branch\n"));
  #endif
-Line 2436 
 for (;; ptr++)
+Line 3101 
 for (;; ptr++)
    c = *ptr;
+   /* If we are at the end of a nested substitution, revert to the outer level
+   string. Nesting only happens one level deep. */
+   if (c == 0 && nestptr != NULL)
+     {
+     ptr = nestptr;
+     nestptr = NULL;
+     c = *ptr;
+     }
    /* If we are in the pre-compile phase, accumulate the length used for the
    previous cycle of this loop. */
    if (lengthptr != NULL)
      {
- #ifdef DEBUG
+ #ifdef PCRE_DEBUG
      if (code > cd->hwm) cd->hwm = code;                 /* High water info */
  #endif
-     if (code > cd->start_workspace + COMPILE_WORK_SIZE) /* Check for overrun */
+     if (code > cd->start_workspace + WORK_SIZE_CHECK)   /* Check for overrun */
        {
        *errorcodeptr = ERR52;
        goto FAILED;
-Line 2466 
 for (;; ptr++)
+Line 3141 
 for (;; ptr++)
        goto FAILED;
        }
-     *lengthptr += code - last_code;
+     *lengthptr += (int)(code - last_code);
      DPRINTF(("length=%d added %d c=%c\n", *lengthptr, code - last_code, c));
      /* If "previous" is set and it is not at the start of the work space, move
-Line 2493 
 for (;; ptr++)
+Line 3168 
 for (;; ptr++)
    /* In the real compile phase, just check the workspace used by the forward
    reference list. */
-   else if (cd->hwm > cd->start_workspace + COMPILE_WORK_SIZE)
+   else if (cd->hwm > cd->start_workspace + WORK_SIZE_CHECK)
      {
      *errorcodeptr = ERR52;
      goto FAILED;
-Line 2503 
 for (;; ptr++)
+Line 3178 
 for (;; ptr++)
    if (inescq && c != 0)
      {
-     if (c == '\\' && ptr[1] == 'E')
+     if (c == CHAR_BACKSLASH && ptr[1] == CHAR_E)
        {
        inescq = FALSE;
        ptr++;
-Line 2529 
 for (;; ptr++)
+Line 3204 
 for (;; ptr++)
    /* Fill in length of a previous callout, except when the next thing is
    a quantifier. */
-   is_quantifier = c == '*' || c == '+' || c == '?' ||
+   is_quantifier =
-     (c == '{' && is_counted_repeat(ptr+1));
+     c == CHAR_ASTERISK || c == CHAR_PLUS || c == CHAR_QUESTION_MARK ||
+     (c == CHAR_LEFT_CURLY_BRACKET && is_counted_repeat(ptr+1));
    if (!is_quantifier && previous_callout != NULL &&
         after_manual_callout-- <= 0)
-Line 2545 
 for (;; ptr++)
+Line 3221 
 for (;; ptr++)
    if ((options & PCRE_EXTENDED) != 0)
      {
      if ((cd->ctypes[c] & ctype_space) != 0) continue;
-     if (c == '#')
+     if (c == CHAR_NUMBER_SIGN)
        {
-       while (*(++ptr) != 0)
+       ptr++;
+       while (*ptr != 0)
          {
          if (IS_NEWLINE(ptr)) { ptr += cd->nllen - 1; break; }
+         ptr++;
+ #ifdef SUPPORT_UTF8
+         if (utf8) while ((*ptr & 0xc0) == 0x80) ptr++;
+ #endif
          }
        if (*ptr != 0) continue;
-Line 2570 
 for (;; ptr++)
+Line 3251 
 for (;; ptr++)
      {
      /* ===================================================================*/
      case 0:                        /* The branch terminates at string end */
-     case '|':                      /* or | or ) */
+     case CHAR_VERTICAL_LINE:       /* or | or ) */
-     case ')':
+     case CHAR_RIGHT_PARENTHESIS:
      *firstbyteptr = firstbyte;
      *reqbyteptr = reqbyte;
      *codeptr = code;
-Line 2583 
 for (;; ptr++)
+Line 3264 
 for (;; ptr++)
          *errorcodeptr = ERR20;
          goto FAILED;
          }
-       *lengthptr += code - last_code;   /* To include callout length */
+       *lengthptr += (int)(code - last_code);   /* To include callout length */
        DPRINTF((">> end branch\n"));
        }
      return TRUE;
-Line 2593 
 for (;; ptr++)
+Line 3274 
 for (;; ptr++)
      /* Handle single-character metacharacters. In multiline mode, ^ disables
      the setting of any following char as a first character. */
-     case '^':
+     case CHAR_CIRCUMFLEX_ACCENT:
+     previous = NULL;
      if ((options & PCRE_MULTILINE) != 0)
        {
        if (firstbyte == REQ_UNSET) firstbyte = REQ_NONE;
+       *code++ = OP_CIRCM;
        }
-     previous = NULL;
+     else *code++ = OP_CIRC;
-     *code++ = OP_CIRC;
      break;
-     case '$':
+     case CHAR_DOLLAR_SIGN:
      previous = NULL;
-     *code++ = OP_DOLL;
+     *code++ = ((options & PCRE_MULTILINE) != 0)? OP_DOLLM : OP_DOLL;
      break;
      /* There can never be a first char if '.' is first, whatever happens about
      repeats. The value of reqbyte doesn't change either. */
-     case '.':
+     case CHAR_DOT:
      if (firstbyte == REQ_UNSET) firstbyte = REQ_NONE;
      zerofirstbyte = firstbyte;
      zeroreqbyte = reqbyte;
      previous = code;
-     *code++ = OP_ANY;
+     *code++ = ((options & PCRE_DOTALL) != 0)? OP_ALLANY: OP_ANY;
      break;
-Line 2630 
 for (;; ptr++)
+Line 3312 
 for (;; ptr++)
      opcode is compiled. It may optionally have a bit map for characters < 256,
      but those above are are explicitly listed afterwards. A flag byte tells
      whether the bitmap is present, and whether this is a negated class or not.
-     */
-     case '[':
+     In JavaScript compatibility mode, an isolated ']' causes an error. In
+     default (Perl) mode, it is treated as a data character. */
+     case CHAR_RIGHT_SQUARE_BRACKET:
+     if ((cd->external_options & PCRE_JAVASCRIPT_COMPAT) != 0)
+       {
+       *errorcodeptr = ERR64;
+       goto FAILED;
+       }
+     goto NORMAL_CHAR;
+     case CHAR_LEFT_SQUARE_BRACKET:
      previous = code;
      /* PCRE supports POSIX class stuff inside a class. Perl gives an error if
      they are encountered at the top level, so we'll do that too. */
-     if ((ptr[1] == ':' || ptr[1] == '.' || ptr[1] == '=') &&
+     if ((ptr[1] == CHAR_COLON || ptr[1] == CHAR_DOT ||
+          ptr[1] == CHAR_EQUALS_SIGN) &&
          check_posix_syntax(ptr, &tempptr))
        {
-       *errorcodeptr = (ptr[1] == ':')? ERR13 : ERR31;
+       *errorcodeptr = (ptr[1] == CHAR_COLON)? ERR13 : ERR31;
        goto FAILED;
        }
-Line 2653 
 for (;; ptr++)
+Line 3346 
 for (;; ptr++)
      for (;;)
        {
        c = *(++ptr);
-       if (c == '\\')
+       if (c == CHAR_BACKSLASH)
          {
-         if (ptr[1] == 'E') ptr++;
+         if (ptr[1] == CHAR_E)
-           else if (strncmp((const char *)ptr+1, "Q\\E", 3) == 0) ptr += 3;
+           ptr++;
-             else break;
+         else if (strncmp((const char *)ptr+1,
+                           STR_Q STR_BACKSLASH STR_E, 3) == 0)
+           ptr += 3;
+         else
+           break;
          }
-       else if (!negate_class && c == '^')
+       else if (!negate_class && c == CHAR_CIRCUMFLEX_ACCENT)
          negate_class = TRUE;
        else break;
        }
+     /* Empty classes are allowed in JavaScript compatibility mode. Otherwise,
+     an initial ']' is taken as a data character -- the code below handles
+     that. In JS mode, [] must always fail, so generate OP_FAIL, whereas
+     [^] must match any character, so generate OP_ALLANY. */
+     if (c == CHAR_RIGHT_SQUARE_BRACKET &&
+         (cd->external_options & PCRE_JAVASCRIPT_COMPAT) != 0)
+       {
+       *code++ = negate_class? OP_ALLANY : OP_FAIL;
+       if (firstbyte == REQ_UNSET) firstbyte = REQ_NONE;
+       zerofirstbyte = firstbyte;
+       break;
+       }
      /* If a class contains a negative special such as \S, we need to flip the
      negation flag at the end, so that support for characters > 255 works
      correctly (they are all included in the class). */
-Line 2687 
 for (;; ptr++)
+Line 3398 
 for (;; ptr++)
  #ifdef SUPPORT_UTF8
      class_utf8 = FALSE;                       /* No chars >= 256 */
      class_utf8data = code + LINK_SIZE + 2;    /* For UTF-8 items */
+     class_utf8data_base = class_utf8data;     /* For resetting in pass 1 */
  #endif
      /* Process characters until ] is reached. By writing this as a "do" it
-Line 2702 
 for (;; ptr++)
+Line 3414 
 for (;; ptr++)
          {                           /* Braces are required because the */
          GETCHARLEN(c, ptr, ptr);    /* macro generates multiple statements */
          }
+       /* In the pre-compile phase, accumulate the length of any UTF-8 extra
+       data and reset the pointer. This is so that very large classes that
+       contain a zillion UTF-8 characters no longer overwrite the work space
+       (which is on the stack). */
+       if (lengthptr != NULL)
+         {
+         *lengthptr += class_utf8data - class_utf8data_base;
+         class_utf8data = class_utf8data_base;
+         }
  #endif
        /* Inside \Q...\E everything is literal except \E */
        if (inescq)
          {
-         if (c == '\\' && ptr[1] == 'E')     /* If we are at \E */
+         if (c == CHAR_BACKSLASH && ptr[1] == CHAR_E)  /* If we are at \E */
            {
            inescq = FALSE;                   /* Reset literal state */
            ptr++;                            /* Skip the 'E' */
-Line 2723 
 for (;; ptr++)
+Line 3447 
 for (;; ptr++)
        [.ch.] and [=ch=] ("collating elements") and fault them, as Perl
 .6 and 5.8 do. */
-       if (c == '[' &&
+       if (c == CHAR_LEFT_SQUARE_BRACKET &&
-           (ptr[1] == ':' || ptr[1] == '.' || ptr[1] == '=') &&
+           (ptr[1] == CHAR_COLON || ptr[1] == CHAR_DOT ||
-           check_posix_syntax(ptr, &tempptr))
+            ptr[1] == CHAR_EQUALS_SIGN) && check_posix_syntax(ptr, &tempptr))
          {
          BOOL local_negate = FALSE;
          int posix_class, taboffset, tabopt;
          register const uschar *cbits = cd->cbits;
          uschar pbits[32];
-         if (ptr[1] != ':')
+         if (ptr[1] != CHAR_COLON)
            {
            *errorcodeptr = ERR31;
            goto FAILED;
            }
          ptr += 2;
-         if (*ptr == '^')
+         if (*ptr == CHAR_CIRCUMFLEX_ACCENT)
            {
            local_negate = TRUE;
            should_flip_negation = TRUE;  /* Note negative special */
            ptr++;
            }
-         posix_class = check_posix_name(ptr, tempptr - ptr);
+         posix_class = check_posix_name(ptr, (int)(tempptr - ptr));
          if (posix_class < 0)
            {
            *errorcodeptr = ERR30;
-Line 2760 
 for (;; ptr++)
+Line 3484 
 for (;; ptr++)
          if ((options & PCRE_CASELESS) != 0 && posix_class <= 2)
            posix_class = 0;
-         /* We build the bit map for the POSIX class in a chunk of local store
+         /* When PCRE_UCP is set, some of the POSIX classes are converted to
-         because we may be adding and subtracting from it, and we don't want to
+         different escape sequences that use Unicode properties. */
-         subtract bits that may be in the main map already. At the end we or the
-         result into the bit map that is being built. */
+ #ifdef SUPPORT_UCP
+         if ((options & PCRE_UCP) != 0)
+           {
+           int pc = posix_class + ((local_negate)? POSIX_SUBSIZE/2 : 0);
+           if (posix_substitutes[pc] != NULL)
+             {
+             nestptr = tempptr + 1;
+             ptr = posix_substitutes[pc] - 1;
+             continue;
+             }
+           }
+ #endif
+         /* In the non-UCP case, we build the bit map for the POSIX class in a
+         chunk of local store because we may be adding and subtracting from it,
+         and we don't want to subtract bits that may be in the main map already.
+         At the end we or the result into the bit map that is being built. */
          posix_class *= 3;
-Line 2807 
 for (;; ptr++)
+Line 3546 
 for (;; ptr++)
        /* Backslash may introduce a single character, or it may introduce one
        of the specials, which just set a flag. The sequence \b is a special
-       case. Inside a class (and only there) it is treated as backspace.
+       case. Inside a class (and only there) it is treated as backspace. We
-       Elsewhere it marks a word boundary. Other escapes have preset maps ready
+       assume that other escapes have more than one character in them, so set
-       to 'or' into the one we are building. We assume they have more than one
+       class_charcount bigger than one. Unrecognized escapes fall through and
-       character in them, so set class_charcount bigger than one. */
+       are either treated as literal characters (by default), or are faulted if
+       PCRE_EXTRA is set. */
-       if (c == '\\')
+       if (c == CHAR_BACKSLASH)
          {
          c = check_escape(&ptr, errorcodeptr, cd->bracount, options, TRUE);
          if (*errorcodeptr != 0) goto FAILED;
-         if (-c == ESC_b) c = '\b';       /* \b is backspace in a class */
+         if (-c == ESC_b) c = CHAR_BS;    /* \b is backspace in a class */
-         else if (-c == ESC_X) c = 'X';   /* \X is literal X in a class */
-         else if (-c == ESC_R) c = 'R';   /* \R is literal R in a class */
          else if (-c == ESC_Q)            /* Handle start of quoted string */
            {
-           if (ptr[1] == '\\' && ptr[2] == 'E')
+           if (ptr[1] == CHAR_BACKSLASH && ptr[2] == CHAR_E)
              {
              ptr += 2; /* avoid empty string */
              }
-Line 2836 
 for (;; ptr++)
+Line 3574 
 for (;; ptr++)
            register const uschar *cbits = cd->cbits;
            class_charcount += 2;     /* Greater than 1 is what matters */
-           /* Save time by not doing this in the pre-compile phase. */
+           switch (-c)
-           if (lengthptr == NULL) switch (-c)
              {
+ #ifdef SUPPORT_UCP
+             case ESC_du:     /* These are the values given for \d etc */
+             case ESC_DU:     /* when PCRE_UCP is set. We replace the */
+             case ESC_wu:     /* escape sequence with an appropriate \p */
+             case ESC_WU:     /* or \P to test Unicode properties instead */
+             case ESC_su:     /* of the default ASCII testing. */
+             case ESC_SU:
+             nestptr = ptr;
+             ptr = substitutes[-c - ESC_DU] - 1;  /* Just before substitute */
+             class_charcount -= 2;                /* Undo! */
+             continue;
+ #endif
              case ESC_d:
              for (c = 0; c < 32; c++) classbits[c] |= cbits[c+cbit_digit];
              continue;
-Line 2858 
 for (;; ptr++)
+Line 3606 
 for (;; ptr++)
              for (c = 0; c < 32; c++) classbits[c] |= ~cbits[c+cbit_word];
              continue;
+             /* Perl 5.004 onwards omits VT from \s, but we must preserve it
+             if it was previously set by something earlier in the character
+             class. */
              case ESC_s:
-             for (c = 0; c < 32; c++) classbits[c] |= cbits[c+cbit_space];
+             classbits[0] |= cbits[cbit_space];
-             classbits[1] &= ~0x08;   /* Perl 5.004 onwards omits VT from \s */
+             classbits[1] |= cbits[cbit_space+1] & ~0x08;
+             for (c = 2; c < 32; c++) classbits[c] |= cbits[c+cbit_space];
              continue;
              case ESC_S:
-Line 2869 
 for (;; ptr++)
+Line 3622 
 for (;; ptr++)
              classbits[1] |= 0x08;    /* Perl 5.004 onwards omits VT from \s */
              continue;
-             default:    /* Not recognized; fall through */
+             case ESC_h:
-             break;      /* Need "default" setting to stop compiler warning. */
-             }
-           /* In the pre-compile phase, just do the recognition. */
-           else if (c == -ESC_d || c == -ESC_D || c == -ESC_w ||
-                    c == -ESC_W || c == -ESC_s || c == -ESC_S) continue;
-           /* We need to deal with \H, \h, \V, and \v in both phases because
-           they use extra memory. */
-           if (-c == ESC_h)
-             {
              SETBIT(classbits, 0x09); /* VT */
              SETBIT(classbits, 0x20); /* SPACE */
              SETBIT(classbits, 0xa0); /* NSBP */
-Line 2906 
 for (;; ptr++)
+Line 3646 
 for (;; ptr++)
                }
  #endif
              continue;
-             }
-           if (-c == ESC_H)
+             case ESC_H:
-             {
              for (c = 0; c < 32; c++)
                {
                int x = 0xff;
-Line 2951 
 for (;; ptr++)
+Line 3689 
 for (;; ptr++)
                }
  #endif
              continue;
-             }
-           if (-c == ESC_v)
+             case ESC_v:
-             {
              SETBIT(classbits, 0x0a); /* LF */
              SETBIT(classbits, 0x0b); /* VT */
              SETBIT(classbits, 0x0c); /* FF */
-Line 2970 
 for (;; ptr++)
+Line 3706 
 for (;; ptr++)
                }
  #endif
              continue;
-             }
-           if (-c == ESC_V)
+             case ESC_V:
-             {
              for (c = 0; c < 32; c++)
                {
                int x = 0xff;
-Line 3003 
 for (;; ptr++)
+Line 3737 
 for (;; ptr++)
                }
  #endif
              continue;
-             }
-           /* We need to deal with \P and \p in both phases. */
  #ifdef SUPPORT_UCP
-           if (-c == ESC_p || -c == ESC_P)
+             case ESC_p:
-             {
+             case ESC_P:
-             BOOL negated;
+               {
-             int pdata;
+               BOOL negated;
-             int ptype = get_ucp(&ptr, &negated, &pdata, errorcodeptr);
+               int pdata;
-             if (ptype < 0) goto FAILED;
+               int ptype = get_ucp(&ptr, &negated, &pdata, errorcodeptr);
-             class_utf8 = TRUE;
+               if (ptype < 0) goto FAILED;
-             *class_utf8data++ = ((-c == ESC_p) != negated)?
+               class_utf8 = TRUE;
-               XCL_PROP : XCL_NOTPROP;
+               *class_utf8data++ = ((-c == ESC_p) != negated)?
-             *class_utf8data++ = ptype;
+                 XCL_PROP : XCL_NOTPROP;
-             *class_utf8data++ = pdata;
+               *class_utf8data++ = ptype;
-             class_charcount -= 2;   /* Not a < 256 character */
+               *class_utf8data++ = pdata;
-             continue;
+               class_charcount -= 2;   /* Not a < 256 character */
-             }
+               continue;
+               }
  #endif
-           /* Unrecognized escapes are faulted if PCRE is running in its
+             /* Unrecognized escapes are faulted if PCRE is running in its
-           strict mode. By default, for compatibility with Perl, they are
+             strict mode. By default, for compatibility with Perl, they are
-           treated as literals. */
+             treated as literals. */
-           if ((options & PCRE_EXTRA) != 0)
+             default:
-             {
+             if ((options & PCRE_EXTRA) != 0)
-             *errorcodeptr = ERR7;
+               {
-             goto FAILED;
+               *errorcodeptr = ERR7;
+               goto FAILED;
+               }
+             class_charcount -= 2;  /* Undo the default count from above */
+             c = *ptr;              /* Get the final character and fall through */
+             break;
              }
-           class_charcount -= 2;  /* Undo the default count from above */
-           c = *ptr;              /* Get the final character and fall through */
            }
          /* Fall through if we have a single character (c >= 0). This may be
-Line 3048 
 for (;; ptr++)
+Line 3782 
 for (;; ptr++)
        entirely. The code for handling \Q and \E is messy. */
        CHECK_RANGE:
-       while (ptr[1] == '\\' && ptr[2] == 'E')
+       while (ptr[1] == CHAR_BACKSLASH && ptr[2] == CHAR_E)
          {
          inescq = FALSE;
          ptr += 2;
-Line 3058 
 for (;; ptr++)
+Line 3792 
 for (;; ptr++)
        /* Remember \r or \n */
-       if (c == '\r' || c == '\n') cd->external_flags |= PCRE_HASCRORLF;
+       if (c == CHAR_CR || c == CHAR_NL) cd->external_flags |= PCRE_HASCRORLF;
        /* Check for range */
-       if (!inescq && ptr[1] == '-')
+       if (!inescq && ptr[1] == CHAR_MINUS)
          {
          int d;
          ptr += 2;
-         while (*ptr == '\\' && ptr[1] == 'E') ptr += 2;
+         while (*ptr == CHAR_BACKSLASH && ptr[1] == CHAR_E) ptr += 2;
          /* If we hit \Q (not followed by \E) at this point, go into escaped
          mode. */
-         while (*ptr == '\\' && ptr[1] == 'Q')
+         while (*ptr == CHAR_BACKSLASH && ptr[1] == CHAR_Q)
            {
            ptr += 2;
-           if (*ptr == '\\' && ptr[1] == 'E') { ptr += 2; continue; }
+           if (*ptr == CHAR_BACKSLASH && ptr[1] == CHAR_E)
+             { ptr += 2; continue; }
            inescq = TRUE;
            break;
            }
-         if (*ptr == 0 || (!inescq && *ptr == ']'))
+         if (*ptr == 0 || (!inescq && *ptr == CHAR_RIGHT_SQUARE_BRACKET))
            {
            ptr = oldptr;
            goto LONE_SINGLE_CHARACTER;
-Line 3098 
 for (;; ptr++)
+Line 3833 
 for (;; ptr++)
          not any of the other escapes. Perl 5.6 treats a hyphen as a literal
          in such circumstances. */
-         if (!inescq && d == '\\')
+         if (!inescq && d == CHAR_BACKSLASH)
            {
            d = check_escape(&ptr, errorcodeptr, cd->bracount, options, TRUE);
            if (*errorcodeptr != 0) goto FAILED;
-           /* \b is backspace; \X is literal X; \R is literal R; any other
+           /* \b is backspace; any other special means the '-' was literal */
-           special means the '-' was literal */
            if (d < 0)
              {
-             if (d == -ESC_b) d = '\b';
+             if (d == -ESC_b) d = CHAR_BS; else
-             else if (d == -ESC_X) d = 'X';
-             else if (d == -ESC_R) d = 'R'; else
                {
                ptr = oldptr;
                goto LONE_SINGLE_CHARACTER;  /* A few lines below */
-Line 3131 
 for (;; ptr++)
+Line 3863 
 for (;; ptr++)
          /* Remember \r or \n */
-         if (d == '\r' || d == '\n') cd->external_flags |= PCRE_HASCRORLF;
+         if (d == CHAR_CR || d == CHAR_NL) cd->external_flags |= PCRE_HASCRORLF;
          /* In UTF-8 mode, if the upper limit is > 255, or > 127 for caseless
          matching, we have to use an XCLASS with extra data items. Caseless
-Line 3251 
 for (;; ptr++)
+Line 3983 
 for (;; ptr++)
          if ((options & PCRE_CASELESS) != 0)
            {
            unsigned int othercase;
-           if ((othercase = _pcre_ucp_othercase(c)) != NOTACHAR)
+           if ((othercase = UCD_OTHERCASE(c)) != c)
              {
              *class_utf8data++ = XCL_SINGLE;
              class_utf8data += _pcre_ord2utf8(othercase, class_utf8data);
-Line 3276 
 for (;; ptr++)
+Line 4008 
 for (;; ptr++)
          }
        }
-     /* Loop until ']' reached. This "while" is the end of the "do" above. */
+     /* Loop until ']' reached. This "while" is the end of the "do" far above.
+     If we are at the end of an internal nested string, revert to the outer
-     while ((c = *(++ptr)) != 0 && (c != ']' || inescq));
+     string. */
-     if (c == 0)                          /* Missing terminating ']' */
+     while (((c = *(++ptr)) != 0 ||
-       {
+            (nestptr != NULL &&
-       *errorcodeptr = ERR6;
+              (ptr = nestptr, nestptr = NULL, c = *(++ptr)) != 0)) &&
-       goto FAILED;
+            (c != CHAR_RIGHT_SQUARE_BRACKET || inescq));
-       }
- /* This code has been disabled because it would mean that \s counts as
- an explicit \r or \n reference, and that's not really what is wanted. Now
- we set the flag only if there is a literal "\r" or "\n" in the class. */
- #if 0
+     /* Check for missing terminating ']' */
-     /* Remember whether \r or \n are in this class */
+     if (c == 0)
-     if (negate_class)
-       {
-       if ((classbits[1] & 0x24) != 0x24) cd->external_flags |= PCRE_HASCRORLF;
-       }
-     else
        {
-       if ((classbits[1] & 0x24) != 0) cd->external_flags |= PCRE_HASCRORLF;
+       *errorcodeptr = ERR6;
+       goto FAILED;
        }
- #endif
      /* If class_charcount is 1, we saw precisely one character whose value is
      less than 256. As long as there were no characters >= 128 and there was no
-Line 3312 
 we set the flag only if there is a liter
+Line 4032 
 we set the flag only if there is a liter
      In UTF-8 mode, we can optimize the negative case only if there were no
      characters >= 128 because OP_NOT and the related opcodes like OP_NOTSTAR
-     operate on single-bytes only. This is an historical hangover. Maybe one day
+     operate on single-bytes characters only. This is an historical hangover.
-     we can tidy these opcodes to handle multi-byte characters.
+     Maybe one day we can tidy these opcodes to handle multi-byte characters.
      The optimization throws away the bit map. We turn the item into a
--character OP_CHAR[NC] if it's positive, or OP_NOT if it's negative. Note
+-character OP_CHAR[I] if it's positive, or OP_NOT[I] if it's negative.
-     that OP_NOT does not support multibyte characters. In the positive case, it
+     Note that OP_NOT[I] does not support multibyte characters. In the positive
-     can cause firstbyte to be set. Otherwise, there can be no first char if
+     case, it can cause firstbyte to be set. Otherwise, there can be no first
-     this item is first, whatever repeat count may follow. In the case of
+     char if this item is first, whatever repeat count may follow. In the case
-     reqbyte, save the previous value for reinstating. */
+     of reqbyte, save the previous value for reinstating. */
  #ifdef SUPPORT_UTF8
      if (class_charcount == 1 && !class_utf8 &&
-Line 3331 
 we set the flag only if there is a liter
+Line 4051 
 we set the flag only if there is a liter
        {
        zeroreqbyte = reqbyte;
-       /* The OP_NOT opcode works on one-byte characters only. */
+       /* The OP_NOT[I] opcodes work on one-byte characters only. */
        if (negate_class)
          {
          if (firstbyte == REQ_UNSET) firstbyte = REQ_NONE;
          zerofirstbyte = firstbyte;
-         *code++ = OP_NOT;
+         *code++ = ((options & PCRE_CASELESS) != 0)? OP_NOTI: OP_NOT;
          *code++ = class_lastchar;
          break;
          }
-Line 3368 
 we set the flag only if there is a liter
+Line 4088 
 we set the flag only if there is a liter
      /* If there are characters with values > 255, we have to compile an
      extended class, with its own opcode, unless there was a negated special
-     such as \S in the class, because in that case all characters > 255 are in
+     such as \S in the class, and PCRE_UCP is not set, because in that case all
-     the class, so any that were explicitly given as well can be ignored. If
+     characters > 255 are in the class, so any that were explicitly given as
-     (when there are explicit characters > 255 that must be listed) there are no
+     well can be ignored. If (when there are explicit characters > 255 that must
-     characters < 256, we can omit the bitmap in the actual compiled code. */
+     be listed) there are no characters < 256, we can omit the bitmap in the
+     actual compiled code. */
  #ifdef SUPPORT_UTF8
-     if (class_utf8 && !should_flip_negation)
+     if (class_utf8 && (!should_flip_negation || (options & PCRE_UCP) != 0))
        {
        *class_utf8data++ = XCL_END;    /* Marks the end of extra data */
        *code++ = OP_XCLASS;
-Line 3400 
 we set the flag only if there is a liter
+Line 4121 
 we set the flag only if there is a liter
        }
  #endif
-     /* If there are no characters > 255, set the opcode to OP_CLASS or
+     /* If there are no characters > 255, or they are all to be included or
-     OP_NCLASS, depending on whether the whole class was negated and whether
+     excluded, set the opcode to OP_CLASS or OP_NCLASS, depending on whether the
-     there were negative specials such as \S in the class. Then copy the 32-byte
+     whole class was negated and whether there were negative specials such as \S
-     map into the code vector, negating it if necessary. */
+     (non-UCP) in the class. Then copy the 32-byte map into the code vector,
+     negating it if necessary. */
      *code++ = (negate_class == should_flip_negation) ? OP_CLASS : OP_NCLASS;
      if (negate_class)
-Line 3423 
 we set the flag only if there is a liter
+Line 4145 
 we set the flag only if there is a liter
      /* Various kinds of repeat; '{' is not necessarily a quantifier, but this
      has been tested above. */
-     case '{':
+     case CHAR_LEFT_CURLY_BRACKET:
      if (!is_quantifier) goto NORMAL_CHAR;
      ptr = read_repeat_counts(ptr+1, &repeat_min, &repeat_max, errorcodeptr);
      if (*errorcodeptr != 0) goto FAILED;
      goto REPEAT;
-     case '*':
+     case CHAR_ASTERISK:
      repeat_min = 0;
      repeat_max = -1;
      goto REPEAT;
-     case '+':
+     case CHAR_PLUS:
      repeat_min = 1;
      repeat_max = -1;
      goto REPEAT;
-     case '?':
+     case CHAR_QUESTION_MARK:
      repeat_min = 0;
      repeat_max = 1;
-Line 3474 
 we set the flag only if there is a liter
+Line 4196 
 we set the flag only if there is a liter
      but if PCRE_UNGREEDY is set, it works the other way round. We change the
      repeat type to the non-default. */
-     if (ptr[1] == '+')
+     if (ptr[1] == CHAR_PLUS)
        {
        repeat_type = 0;                  /* Force greedy */
        possessive_quantifier = TRUE;
        ptr++;
        }
-     else if (ptr[1] == '?')
+     else if (ptr[1] == CHAR_QUESTION_MARK)
        {
        repeat_type = greedy_non_default;
        ptr++;
        }
      else repeat_type = greedy_default;
+     /* If previous was a recursion call, wrap it in atomic brackets so that
+     previous becomes the atomic group. All recursions were so wrapped in the
+     past, but it no longer happens for non-repeated recursions. In fact, the
+     repeated ones could be re-implemented independently so as not to need this,
+     but for the moment we rely on the code for repeating groups. */
+     if (*previous == OP_RECURSE)
+       {
+       memmove(previous + 1 + LINK_SIZE, previous, 1 + LINK_SIZE);
+       *previous = OP_ONCE;
+       PUT(previous, 1, 2 + 2*LINK_SIZE);
+       previous[2 + 2*LINK_SIZE] = OP_KET;
+       PUT(previous, 3 + 2*LINK_SIZE, 2 + 2*LINK_SIZE);
+       code += 2 + 2 * LINK_SIZE;
+       length_prevgroup = 3 + 3*LINK_SIZE;
+       /* When actually compiling, we need to check whether this was a forward
+       reference, and if so, adjust the offset. */
+       if (lengthptr == NULL && cd->hwm >= cd->start_workspace + LINK_SIZE)
+         {
+         int offset = GET(cd->hwm, -LINK_SIZE);
+         if (offset == previous + 1 - cd->start_code)
+           PUT(cd->hwm, -LINK_SIZE, offset + 1 + LINK_SIZE);
+         }
+       }
+     /* Now handle repetition for the different types of item. */
      /* If previous was a character match, abolish the item and generate a
      repeat item instead. If a char item has a minumum of more than one, ensure
-Line 3493 
 we set the flag only if there is a liter
+Line 4244 
 we set the flag only if there is a liter
      the first thing in a branch because the x will have gone into firstbyte
      instead.  */
-     if (*previous == OP_CHAR || *previous == OP_CHARNC)
+     if (*previous == OP_CHAR || *previous == OP_CHARI)
        {
+       op_type = (*previous == OP_CHAR)? 0 : OP_STARI - OP_STAR;
        /* Deal with UTF-8 characters that take up more than one byte. It's
        easier to write this out separately than try to macrify it. Use c to
        hold the length of the character in bytes, plus 0x80 to flag that it's a
-Line 3527 
 we set the flag only if there is a liter
+Line 4280 
 we set the flag only if there is a liter
        if (!possessive_quantifier &&
            repeat_max < 0 &&
-           check_auto_possessive(*previous, c, utf8, utf8_char, ptr + 1,
+           check_auto_possessive(previous, utf8, ptr + 1, options, cd))
-             options, cd))
          {
          repeat_type = 0;    /* Force greedy */
          possessive_quantifier = TRUE;
-Line 3540 
 we set the flag only if there is a liter
+Line 4292 
 we set the flag only if there is a liter
      /* If previous was a single negated character ([^a] or similar), we use
      one of the special opcodes, replacing it. The code is shared with single-
      character repeats by setting opt_type to add a suitable offset into
-     repeat_type. We can also test for auto-possessification. OP_NOT is
+     repeat_type. We can also test for auto-possessification. OP_NOT and OP_NOTI
-     currently used only for single-byte chars. */
+     are currently used only for single-byte chars. */
-     else if (*previous == OP_NOT)
+     else if (*previous == OP_NOT || *previous == OP_NOTI)
        {
-       op_type = OP_NOTSTAR - OP_STAR;  /* Use "not" opcodes */
+       op_type = ((*previous == OP_NOT)? OP_NOTSTAR : OP_NOTSTARI) - OP_STAR;
        c = previous[1];
        if (!possessive_quantifier &&
            repeat_max < 0 &&
-           check_auto_possessive(OP_NOT, c, utf8, NULL, ptr + 1, options, cd))
+           check_auto_possessive(previous, utf8, ptr + 1, options, cd))
          {
          repeat_type = 0;    /* Force greedy */
          possessive_quantifier = TRUE;
-Line 3573 
 we set the flag only if there is a liter
+Line 4325 
 we set the flag only if there is a liter
        if (!possessive_quantifier &&
            repeat_max < 0 &&
-           check_auto_possessive(c, 0, utf8, NULL, ptr + 1, options, cd))
+           check_auto_possessive(previous, utf8, ptr + 1, options, cd))
          {
          repeat_type = 0;    /* Force greedy */
          possessive_quantifier = TRUE;
-Line 3595 
 we set the flag only if there is a liter
+Line 4347 
 we set the flag only if there is a liter
        if (repeat_max == 0) goto END_REPEAT;
+       /*--------------------------------------------------------------------*/
+       /* This code is obsolete from release 8.00; the restriction was finally
+       removed: */
        /* All real repeats make it impossible to handle partial matching (maybe
        one day we will be able to remove this restriction). */
-       if (repeat_max != 1) cd->external_flags |= PCRE_NOPARTIAL;
+       /* if (repeat_max != 1) cd->external_flags |= PCRE_NOPARTIAL; */
+       /*--------------------------------------------------------------------*/
        /* Combine the op_type with the repeat_type */
-Line 3737 
 we set the flag only if there is a liter
+Line 4494 
 we set the flag only if there is a liter
  #ifdef SUPPORT_UTF8
               *previous == OP_XCLASS ||
  #endif
-              *previous == OP_REF)
+              *previous == OP_REF ||
+              *previous == OP_REFI)
        {
        if (repeat_max == 0)
          {
-Line 3745 
 we set the flag only if there is a liter
+Line 4503 
 we set the flag only if there is a liter
          goto END_REPEAT;
          }
+       /*--------------------------------------------------------------------*/
+       /* This code is obsolete from release 8.00; the restriction was finally
+       removed: */
        /* All real repeats make it impossible to handle partial matching (maybe
        one day we will be able to remove this restriction). */
-       if (repeat_max != 1) cd->external_flags |= PCRE_NOPARTIAL;
+       /* if (repeat_max != 1) cd->external_flags |= PCRE_NOPARTIAL; */
+       /*--------------------------------------------------------------------*/
        if (repeat_min == 0 && repeat_max == -1)
          *code++ = OP_CRSTAR + repeat_type;
-Line 3766 
 we set the flag only if there is a liter
+Line 4529 
 we set the flag only if there is a liter
        }
      /* If previous was a bracket group, we may have to replicate it in certain
-     cases. */
+     cases. Note that at this point we can encounter only the "basic" BRA and
+     KET opcodes, as this is the place where they get converted into the more
+     special varieties. */
      else if (*previous == OP_BRA  || *previous == OP_CBRA ||
               *previous == OP_ONCE || *previous == OP_COND)
        {
        register int i;
-       int ketoffset = 0;
+       int len = (int)(code - previous);
-       int len = code - previous;
        uschar *bralink = NULL;
+       uschar *brazeroptr = NULL;
        /* Repeating a DEFINE group is pointless */
        if (*previous == OP_COND && previous[LINK_SIZE+1] == OP_DEF)
-Line 3784 
 we set the flag only if there is a liter
+Line 4549 
 we set the flag only if there is a liter
          goto FAILED;
          }
-       /* If the maximum repeat count is unlimited, find the end of the bracket
-       by scanning through from the start, and compute the offset back to it
-       from the current code pointer. There may be an OP_OPT setting following
-       the final KET, so we can't find the end just by going back from the code
-       pointer. */
-       if (repeat_max == -1)
-         {
-         register uschar *ket = previous;
-         do ket += GET(ket, 1); while (*ket != OP_KET);
-         ketoffset = code - ket;
-         }
        /* The case of a zero minimum is special because of the need to stick
        OP_BRAZERO in front of it, and because the group appears once in the
        data, whereas in other cases it appears the minimum number of times. For
-Line 3806 
 we set the flag only if there is a liter
+Line 4558 
 we set the flag only if there is a liter
        if (repeat_min == 0)
          {
-         /* If the maximum is also zero, we just omit the group from the output
+         /* If the maximum is also zero, we used to just omit the group from the
-         altogether. */
+         output altogether, like this:
-         if (repeat_max == 0)
+         ** if (repeat_max == 0)
-           {
+         **   {
-           code = previous;
+         **   code = previous;
-           goto END_REPEAT;
+         **   goto END_REPEAT;
-           }
+         **   }
+         However, that fails when a group is referenced as a subroutine from
+         elsewhere in the pattern, so now we stick in OP_SKIPZERO in front of it
+         so that it is skipped on execution. As we don't have a list of which
+         groups are referenced, we cannot do this selectively.
+         If the maximum is 1 or unlimited, we just have to stick in the BRAZERO
+         and do no more at this point. However, we do need to adjust any
+         OP_RECURSE calls inside the group that refer to the group itself or any
+         internal or forward referenced group, because the offset is from the
+         start of the whole regex. Temporarily terminate the pattern while doing
+         this. */
-         /* If the maximum is 1 or unlimited, we just have to stick in the
+         if (repeat_max <= 1)    /* Covers 0, 1, and unlimited */
-         BRAZERO and do no more at this point. However, we do need to adjust
-         any OP_RECURSE calls inside the group that refer to the group itself or
-         any internal or forward referenced group, because the offset is from
-         the start of the whole regex. Temporarily terminate the pattern while
-         doing this. */
-         if (repeat_max <= 1)
            {
            *code = OP_END;
            adjust_recurse(previous, 1, utf8, cd, save_hwm);
            memmove(previous+1, previous, len);
            code++;
+           if (repeat_max == 0)
+             {
+             *previous++ = OP_SKIPZERO;
+             goto END_REPEAT;
+             }
+           brazeroptr = previous;    /* Save for possessive optimizing */
            *previous++ = OP_BRAZERO + repeat_type;
            }
-Line 3852 
 we set the flag only if there is a liter
+Line 4615 
 we set the flag only if there is a liter
            /* We chain together the bracket offset fields that have to be
            filled in later when the ends of the brackets are reached. */
-           offset = (bralink == NULL)? 0 : previous - bralink;
+           offset = (bralink == NULL)? 0 : (int)(previous - bralink);
            bralink = previous;
            PUTINC(previous, 0, offset);
            }
-Line 3873 
 we set the flag only if there is a liter
+Line 4636 
 we set the flag only if there is a liter
            {
            /* In the pre-compile phase, we don't actually do the replication. We
            just adjust the length as if we had. Do some paranoid checks for
-           potential integer overflow. */
+           potential integer overflow. The INT64_OR_DOUBLE type is a 64-bit
+           integer type when available, otherwise double. */
            if (lengthptr != NULL)
              {
              int delta = (repeat_min - 1)*length_prevgroup;
-             if ((double)(repeat_min - 1)*(double)length_prevgroup >
+             if ((INT64_OR_DOUBLE)(repeat_min - 1)*
-                                                             (double)INT_MAX ||
+                   (INT64_OR_DOUBLE)length_prevgroup >
+                     (INT64_OR_DOUBLE)INT_MAX ||
                  OFLOW_MAX - *lengthptr < delta)
                {
                *errorcodeptr = ERR20;
-Line 3925 
 we set the flag only if there is a liter
+Line 4690 
 we set the flag only if there is a liter
          just adjust the length as if we had. For each repetition we must add 1
          to the length for BRAZERO and for all but the last repetition we must
          add 2 + 2*LINKSIZE to allow for the nesting that occurs. Do some
-         paranoid checks to avoid integer overflow. */
+         paranoid checks to avoid integer overflow. The INT64_OR_DOUBLE type is
+         a 64-bit integer type when available, otherwise double. */
          if (lengthptr != NULL && repeat_max > 0)
            {
            int delta = repeat_max * (length_prevgroup + 1 + 2 + 2*LINK_SIZE) -
 - 2*LINK_SIZE;   /* Last one doesn't nest */
-           if ((double)repeat_max *
+           if ((INT64_OR_DOUBLE)repeat_max *
-                 (double)(length_prevgroup + 1 + 2 + 2*LINK_SIZE)
+                 (INT64_OR_DOUBLE)(length_prevgroup + 1 + 2 + 2*LINK_SIZE)
-                   > (double)INT_MAX ||
+                   > (INT64_OR_DOUBLE)INT_MAX ||
                OFLOW_MAX - *lengthptr < delta)
              {
              *errorcodeptr = ERR20;
-Line 3958 
 we set the flag only if there is a liter
+Line 4724 
 we set the flag only if there is a liter
              {
              int offset;
              *code++ = OP_BRA;
-             offset = (bralink == NULL)? 0 : code - bralink;
+             offset = (bralink == NULL)? 0 : (int)(code - bralink);
              bralink = code;
              PUTINC(code, 0, offset);
              }
-Line 3979 
 we set the flag only if there is a liter
+Line 4745 
 we set the flag only if there is a liter
          while (bralink != NULL)
            {
            int oldlinkoffset;
-           int offset = code - bralink + 1;
+           int offset = (int)(code - bralink + 1);
            uschar *bra = code - offset;
            oldlinkoffset = GET(bra, 1);
            bralink = (oldlinkoffset == 0)? NULL : bralink - oldlinkoffset;
-Line 3989 
 we set the flag only if there is a liter
+Line 4755 
 we set the flag only if there is a liter
            }
          }
-       /* If the maximum is unlimited, set a repeater in the final copy. We
+       /* If the maximum is unlimited, set a repeater in the final copy. For
-       can't just offset backwards from the current code point, because we
+       ONCE brackets, that's all we need to do. However, possessively repeated
-       don't know if there's been an options resetting after the ket. The
+       ONCE brackets can be converted into non-capturing brackets, as the
-       correct offset was computed above.
+       behaviour of (?:xx)++ is the same as (?>xx)++ and this saves having to
+       deal with possessive ONCEs specially.
+       Otherwise, if the quantifier was possessive, we convert the BRA code to
+       the POS form, and the KET code to KETRPOS. (It turns out to be convenient
+       at runtime to detect this kind of subpattern at both the start and at the
+       end.) The use of special opcodes makes it possible to reduce greatly the
+       stack usage in pcre_exec(). If the group is preceded by OP_BRAZERO,
+       convert this to OP_BRAPOSZERO. Then cancel the possessive flag so that
+       the default action below, of wrapping everything inside atomic brackets,
+       does not happen.
        Then, when we are doing the actual compile phase, check to see whether
-       this group is a non-atomic one that could match an empty string. If so,
+       this group is one that could match an empty string. If so, convert the
-       convert the initial operator to the S form (e.g. OP_BRA -> OP_SBRA) so
+       initial operator to the S form (e.g. OP_BRA -> OP_SBRA) so that runtime
-       that runtime checking can be done. [This check is also applied to
+       checking can be done. [This check is also applied to ONCE groups at
-       atomic groups at runtime, but in a different way.] */
+       runtime, but in a different way.] */
        else
          {
-         uschar *ketcode = code - ketoffset;
+         uschar *ketcode = code - 1 - LINK_SIZE;
          uschar *bracode = ketcode - GET(ketcode, 1);
-         *ketcode = OP_KETRMAX + repeat_type;
-         if (lengthptr == NULL && *bracode != OP_ONCE)
+         if (*bracode == OP_ONCE && possessive_quantifier) *bracode = OP_BRA;
+         if (*bracode == OP_ONCE)
+           *ketcode = OP_KETRMAX + repeat_type;
+         else
            {
-           uschar *scode = bracode;
+           if (possessive_quantifier)
-           do
+             {
+             *bracode += 1;                   /* Switch to xxxPOS opcodes */
+             *ketcode = OP_KETRPOS;
+             if (brazeroptr != NULL) *brazeroptr = OP_BRAPOSZERO;
+             possessive_quantifier = FALSE;
+             }
+           else *ketcode = OP_KETRMAX + repeat_type;
+           if (lengthptr == NULL)
              {
-             if (could_be_empty_branch(scode, ketcode, utf8))
+             uschar *scode = bracode;
+             do
                {
-               *bracode += OP_SBRA - OP_BRA;
+               if (could_be_empty_branch(scode, ketcode, utf8, cd))
-               break;
+                 {
+                 *bracode += OP_SBRA - OP_BRA;
+                 break;
+                 }
+               scode += GET(scode, 1);
                }
-             scode += GET(scode, 1);
+             while (*scode == OP_ALT);
              }
-           while (*scode == OP_ALT);
            }
          }
        }
+     /* If previous is OP_FAIL, it was generated by an empty class [] in
+     JavaScript mode. The other ways in which OP_FAIL can be generated, that is
+     by (*FAIL) or (?!) set previous to NULL, which gives a "nothing to repeat"
+     error above. We can just ignore the repeat in JS case. */
+     else if (*previous == OP_FAIL) goto END_REPEAT;
      /* Else there's some kind of shambles */
      else
-Line 4031 
 we set the flag only if there is a liter
+Line 4829 
 we set the flag only if there is a liter
        }
      /* If the character following a repeat is '+', or if certain optimization
-     tests above succeeded, possessive_quantifier is TRUE. For some of the
+     tests above succeeded, possessive_quantifier is TRUE. For some opcodes,
-     simpler opcodes, there is an special alternative opcode for this. For
+     there are special alternative opcodes for this case. For anything else, we
-     anything else, we wrap the entire repeated item inside OP_ONCE brackets.
+     wrap the entire repeated item inside OP_ONCE brackets. Logically, the '+'
-     The '+' notation is just syntactic sugar, taken from Sun's Java package,
+     notation is just syntactic sugar, taken from Sun's Java package, but the
-     but the special opcodes can optimize it a bit. The repeated item starts at
+     special opcodes can optimize it.
-     tempcode, not at previous, which might be the first part of a string whose
-     (former) last char we repeated.
+     Possessively repeated subpatterns have already been handled in the code
+     just above, so possessive_quantifier is always FALSE for them at this
+     stage.
+     Note that the repeated item starts at tempcode, not at previous, which
+     might be the first part of a string whose (former) last char we repeated.
      Possessifying an 'exact' quantifier has no effect, so we can ignore it. But
      an 'upto' may follow. We skip over an 'exact' item, and then test the
-Line 4046 
 we set the flag only if there is a liter
+Line 4849 
 we set the flag only if there is a liter
      if (possessive_quantifier)
        {
        int len;
-       if (*tempcode == OP_EXACT || *tempcode == OP_TYPEEXACT ||
-           *tempcode == OP_NOTEXACT)
+       if (*tempcode == OP_TYPEEXACT)
          tempcode += _pcre_OP_lengths[*tempcode] +
-           ((*tempcode == OP_TYPEEXACT &&
+           ((tempcode[3] == OP_PROP || tempcode[3] == OP_NOTPROP)? 2 : 0);
-              (tempcode[3] == OP_PROP || tempcode[3] == OP_NOTPROP))? 2:0);
-       len = code - tempcode;
+       else if (*tempcode == OP_EXACT || *tempcode == OP_NOTEXACT)
+         {
+         tempcode += _pcre_OP_lengths[*tempcode];
+ #ifdef SUPPORT_UTF8
+         if (utf8 && tempcode[-1] >= 0xc0)
+           tempcode += _pcre_utf8_table4[tempcode[-1] & 0x3f];
+ #endif
+         }
+       len = (int)(code - tempcode);
        if (len > 0) switch (*tempcode)
          {
          case OP_STAR:  *tempcode = OP_POSSTAR; break;
-Line 4059 
 we set the flag only if there is a liter
+Line 4871 
 we set the flag only if there is a liter
          case OP_QUERY: *tempcode = OP_POSQUERY; break;
          case OP_UPTO:  *tempcode = OP_POSUPTO; break;
-         case OP_TYPESTAR:  *tempcode = OP_TYPEPOSSTAR; break;
+         case OP_STARI:  *tempcode = OP_POSSTARI; break;
-         case OP_TYPEPLUS:  *tempcode = OP_TYPEPOSPLUS; break;
+         case OP_PLUSI:  *tempcode = OP_POSPLUSI; break;
-         case OP_TYPEQUERY: *tempcode = OP_TYPEPOSQUERY; break;
+         case OP_QUERYI: *tempcode = OP_POSQUERYI; break;
-         case OP_TYPEUPTO:  *tempcode = OP_TYPEPOSUPTO; break;
+         case OP_UPTOI:  *tempcode = OP_POSUPTOI; break;
          case OP_NOTSTAR:  *tempcode = OP_NOTPOSSTAR; break;
          case OP_NOTPLUS:  *tempcode = OP_NOTPOSPLUS; break;
          case OP_NOTQUERY: *tempcode = OP_NOTPOSQUERY; break;
          case OP_NOTUPTO:  *tempcode = OP_NOTPOSUPTO; break;
+         case OP_NOTSTARI:  *tempcode = OP_NOTPOSSTARI; break;
+         case OP_NOTPLUSI:  *tempcode = OP_NOTPOSPLUSI; break;
+         case OP_NOTQUERYI: *tempcode = OP_NOTPOSQUERYI; break;
+         case OP_NOTUPTOI:  *tempcode = OP_NOTPOSUPTOI; break;
+         case OP_TYPESTAR:  *tempcode = OP_TYPEPOSSTAR; break;
+         case OP_TYPEPLUS:  *tempcode = OP_TYPEPOSPLUS; break;
+         case OP_TYPEQUERY: *tempcode = OP_TYPEPOSQUERY; break;
+         case OP_TYPEUPTO:  *tempcode = OP_TYPEPOSUPTO; break;
+         /* Because we are moving code along, we must ensure that any
+         pending recursive references are updated. */
          default:
+         *code = OP_END;
+         adjust_recurse(tempcode, 1 + LINK_SIZE, utf8, cd, save_hwm);
          memmove(tempcode + 1+LINK_SIZE, tempcode, len);
          code += 1 + LINK_SIZE;
          len += 1 + LINK_SIZE;
-Line 4096 
 we set the flag only if there is a liter
+Line 4923 
 we set the flag only if there is a liter
      lookbehind or option setting or condition or all the other extended
      parenthesis forms.  */
-     case '(':
+     case CHAR_LEFT_PARENTHESIS:
      newoptions = options;
      skipbytes = 0;
      bravalue = OP_CBRA;
-Line 4105 
 we set the flag only if there is a liter
+Line 4932 
 we set the flag only if there is a liter
      /* First deal with various "verbs" that can be introduced by '*'. */
-     if (*(++ptr) == '*' && (cd->ctypes[ptr[1]] & ctype_letter) != 0)
+     if (*(++ptr) == CHAR_ASTERISK &&
+          ((cd->ctypes[ptr[1]] & ctype_letter) != 0 || ptr[1] == ':'))
        {
        int i, namelen;
+       int arglen = 0;
        const char *vn = verbnames;
-       const uschar *name = ++ptr;
+       const uschar *name = ptr + 1;
+       const uschar *arg = NULL;
        previous = NULL;
-       while ((cd->ctypes[*++ptr] & ctype_letter) != 0);
+       while ((cd->ctypes[*++ptr] & ctype_letter) != 0) {};
-       if (*ptr == ':')
+       namelen = (int)(ptr - name);
+       if (*ptr == CHAR_COLON)
          {
-         *errorcodeptr = ERR59;   /* Not supported */
+         arg = ++ptr;
-         goto FAILED;
+         while ((cd->ctypes[*ptr] & (ctype_letter|ctype_digit)) != 0
+           || *ptr == '_') ptr++;
+         arglen = (int)(ptr - arg);
          }
-       if (*ptr != ')')
+       if (*ptr != CHAR_RIGHT_PARENTHESIS)
          {
          *errorcodeptr = ERR60;
          goto FAILED;
          }
-       namelen = ptr - name;
+       /* Scan the table of verb names */
        for (i = 0; i < verbcount; i++)
          {
          if (namelen == verbs[i].len &&
              strncmp((char *)name, vn, namelen) == 0)
            {
-           *code = verbs[i].op;
+           /* Check for open captures before ACCEPT and convert it to
-           if (*code++ == OP_ACCEPT) cd->had_accept = TRUE;
+           ASSERT_ACCEPT if in an assertion. */
-           break;
+           if (verbs[i].op == OP_ACCEPT)
+             {
+             open_capitem *oc;
+             if (arglen != 0)
+               {
+               *errorcodeptr = ERR59;
+               goto FAILED;
+               }
+             cd->had_accept = TRUE;
+             for (oc = cd->open_caps; oc != NULL; oc = oc->next)
+               {
+               *code++ = OP_CLOSE;
+               PUT2INC(code, 0, oc->number);
+               }
+             *code++ = (cd->assert_depth > 0)? OP_ASSERT_ACCEPT : OP_ACCEPT;
+             }
+           /* Handle other cases with/without an argument */
+           else if (arglen == 0)
+             {
+             if (verbs[i].op < 0)   /* Argument is mandatory */
+               {
+               *errorcodeptr = ERR66;
+               goto FAILED;
+               }
+             *code = verbs[i].op;
+             if (*code++ == OP_THEN)
+               {
+               PUT(code, 0, code - bcptr->current_branch - 1);
+               code += LINK_SIZE;
+               }
+             }
+           else
+             {
+             if (verbs[i].op_arg < 0)   /* Argument is forbidden */
+               {
+               *errorcodeptr = ERR59;
+               goto FAILED;
+               }
+             *code = verbs[i].op_arg;
+             if (*code++ == OP_THEN_ARG)
+               {
+               PUT(code, 0, code - bcptr->current_branch - 1);
+               code += LINK_SIZE;
+               }
+             *code++ = arglen;
+             memcpy(code, arg, arglen);
+             code += arglen;
+             *code++ = 0;
+             }
+           break;  /* Found verb, exit loop */
            }
          vn += verbs[i].len + 1;
          }
-       if (i < verbcount) continue;
-       *errorcodeptr = ERR60;
+       if (i < verbcount) continue;    /* Successfully handled a verb */
+       *errorcodeptr = ERR60;          /* Verb not recognized */
        goto FAILED;
        }
      /* Deal with the extended parentheses; all are introduced by '?', and the
      appearance of any of them means that this is not a capturing group. */
-     else if (*ptr == '?')
+     else if (*ptr == CHAR_QUESTION_MARK)
        {
        int i, set, unset, namelen;
        int *optset;
-Line 4151 
 we set the flag only if there is a liter
+Line 5044 
 we set the flag only if there is a liter
        switch (*(++ptr))
          {
-         case '#':                 /* Comment; skip to ket */
+         case CHAR_NUMBER_SIGN:                 /* Comment; skip to ket */
          ptr++;
-         while (*ptr != 0 && *ptr != ')') ptr++;
+         while (*ptr != 0 && *ptr != CHAR_RIGHT_PARENTHESIS) ptr++;
          if (*ptr == 0)
            {
            *errorcodeptr = ERR18;
-Line 4163 
 we set the flag only if there is a liter
+Line 5056 
 we set the flag only if there is a liter
          /* ------------------------------------------------------------ */
-         case '|':                 /* Reset capture count for each branch */
+         case CHAR_VERTICAL_LINE:  /* Reset capture count for each branch */
          reset_bracount = TRUE;
          /* Fall through */
          /* ------------------------------------------------------------ */
-         case ':':                 /* Non-capturing bracket */
+         case CHAR_COLON:          /* Non-capturing bracket */
          bravalue = OP_BRA;
          ptr++;
          break;
          /* ------------------------------------------------------------ */
-         case '(':
+         case CHAR_LEFT_PARENTHESIS:
          bravalue = OP_COND;       /* Conditional group */
          /* A condition can be an assertion, a number (referring to a numbered
-Line 4195 
 we set the flag only if there is a liter
+Line 5088 
 we set the flag only if there is a liter
          the switch. This will take control down to where bracketed groups,
          including assertions, are processed. */
-         if (ptr[1] == '?' && (ptr[2] == '=' || ptr[2] == '!' || ptr[2] == '<'))
+         if (ptr[1] == CHAR_QUESTION_MARK && (ptr[2] == CHAR_EQUALS_SIGN ||
+             ptr[2] == CHAR_EXCLAMATION_MARK || ptr[2] == CHAR_LESS_THAN_SIGN))
            break;
          /* Most other conditions use OP_CREF (a couple change to OP_RREF
-Line 4207 
 we set the flag only if there is a liter
+Line 5101 
 we set the flag only if there is a liter
          /* Check for a test for recursion in a named group. */
-         if (ptr[1] == 'R' && ptr[2] == '&')
+         if (ptr[1] == CHAR_R && ptr[2] == CHAR_AMPERSAND)
            {
            terminator = -1;
            ptr += 2;
-Line 4217 
 we set the flag only if there is a liter
+Line 5111 
 we set the flag only if there is a liter
          /* Check for a test for a named group's having been set, using the Perl
          syntax (?(<name>) or (?('name') */
-         else if (ptr[1] == '<')
+         else if (ptr[1] == CHAR_LESS_THAN_SIGN)
            {
-           terminator = '>';
+           terminator = CHAR_GREATER_THAN_SIGN;
            ptr++;
            }
-         else if (ptr[1] == '\'')
+         else if (ptr[1] == CHAR_APOSTROPHE)
            {
-           terminator = '\'';
+           terminator = CHAR_APOSTROPHE;
            ptr++;
            }
          else
            {
            terminator = 0;
-           if (ptr[1] == '-' || ptr[1] == '+') refsign = *(++ptr);
+           if (ptr[1] == CHAR_MINUS || ptr[1] == CHAR_PLUS) refsign = *(++ptr);
            }
          /* We now expect to read a name; any thing else is an error */
-Line 4250 
 we set the flag only if there is a liter
+Line 5144 
 we set the flag only if there is a liter
            {
            if (recno >= 0)
              recno = ((digitab[*ptr] & ctype_digit) != 0)?
-               recno * 10 + *ptr - '0' : -1;
+               recno * 10 + *ptr - CHAR_0 : -1;
            ptr++;
            }
-         namelen = ptr - name;
+         namelen = (int)(ptr - name);
-         if ((terminator > 0 && *ptr++ != terminator) || *ptr++ != ')')
+         if ((terminator > 0 && *ptr++ != terminator) ||
+             *ptr++ != CHAR_RIGHT_PARENTHESIS)
            {
            ptr--;      /* Error offset */
            *errorcodeptr = ERR26;
-Line 4277 
 we set the flag only if there is a liter
+Line 5172 
 we set the flag only if there is a liter
              *errorcodeptr = ERR58;
              goto FAILED;
              }
-           recno = (refsign == '-')?
+           recno = (refsign == CHAR_MINUS)?
              cd->bracount - recno + 1 : recno +cd->bracount;
            if (recno <= 0 || recno > cd->final_bracount)
              {
-Line 4289 
 we set the flag only if there is a liter
+Line 5184 
 we set the flag only if there is a liter
            }
          /* Otherwise (did not start with "+" or "-"), start by looking for the
-         name. */
+         name. If we find a name, add one to the opcode to change OP_CREF or
+         OP_RREF into OP_NCREF or OP_NRREF. These behave exactly the same,
+         except they record that the reference was originally to a name. The
+         information is used to check duplicate names. */
          slot = cd->name_table;
          for (i = 0; i < cd->names_found; i++)