/[pcre]/code/trunk/pcre_compile.c

Diff of /code/trunk/pcre_compile.c

Parent Directory | Revision Log | View Patch Patch

-revision 178 by ph10,
Wed Jun 13 08:44:34 2007 UTC
+revision 447 by ph10,
Tue Sep 15 18:17:54 2009 UTC
 Line 6
  and semantics are as close as possible to those of the Perl 5 language.
                         Written by Philip Hazel
-            Copyright (c) 1997-2007 University of Cambridge
+            Copyright (c) 1997-2009 University of Cambridge
  -----------------------------------------------------------------------------
  Redistribution and use in source and binary forms, with or without
 Line 42 
 POSSIBILITY OF SUCH DAMAGE.
  supporting internal functions that are not used by other modules. */
+ #ifdef HAVE_CONFIG_H
+ #include "config.h"
+ #endif
  #define NLBLOCK cd             /* Block containing newline information */
  #define PSSTART start_pattern  /* Field containing processed string start */
  #define PSEND   end_pattern    /* Field containing processed string end */
  #include "pcre_internal.h"
-Line 62 
 used by pcretest. DEBUG is not defined w
+Line 65 
 used by pcretest. DEBUG is not defined w
  #define SETBIT(a,b) a[b/8] |= (1 << (b%8))
+ /* Maximum length value to check against when making sure that the integer that
+ holds the compiled pattern length does not overflow. We make it a bit less than
+ INT_MAX to allow for adding in group terminating bytes, so that we don't have
+ to check them every time. */
+ #define OFLOW_MAX (INT_MAX - 20)
  /*************************************************
  *      Code parameters and static tables         *
-Line 87 
 are simple data values; negative values
+Line 97 
 are simple data values; negative values
  on. Zero means further processing is needed (for things like \x), or the escape
  is invalid. */
- #ifndef EBCDIC  /* This is the "normal" table for ASCII systems */
+ #ifndef EBCDIC
+ /* This is the "normal" table for ASCII systems or for EBCDIC systems running
+ in UTF-8 mode. */
  static const short int escapes[] = {
-,      0,      0,      0,      0,      0,      0,      0,   /* 0 - 7 */
+,                       0,
-,      0,    ':',    ';',    '<',    '=',    '>',    '?',   /* 8 - ? */
+,                       0,
-    '@', -ESC_A, -ESC_B, -ESC_C, -ESC_D, -ESC_E,      0, -ESC_G,   /* @ - G */
+,                       0,
- -ESC_H,      0,      0, -ESC_K,      0,      0,      0,      0,   /* H - O */
+,                       0,
- -ESC_P, -ESC_Q, -ESC_R, -ESC_S,      0,      0, -ESC_V, -ESC_W,   /* P - W */
+,                       0,
- -ESC_X,      0, -ESC_Z,    '[',   '\\',    ']',    '^',    '_',   /* X - _ */
+      CHAR_COLON,              CHAR_SEMICOLON,
-    '`',      7, -ESC_b,      0, -ESC_d,  ESC_e,  ESC_f,      0,   /* ` - g */
+      CHAR_LESS_THAN_SIGN,     CHAR_EQUALS_SIGN,
- -ESC_h,      0,      0, -ESC_k,      0,      0,  ESC_n,      0,   /* h - o */
+      CHAR_GREATER_THAN_SIGN,  CHAR_QUESTION_MARK,
- -ESC_p,      0,  ESC_r, -ESC_s,  ESC_tee,    0, -ESC_v, -ESC_w,   /* p - w */
+      CHAR_COMMERCIAL_AT,      -ESC_A,
-,      0, -ESC_z                                            /* x - z */
+      -ESC_B,                  -ESC_C,
+      -ESC_D,                  -ESC_E,
+,                       -ESC_G,
+      -ESC_H,                  0,
+,                       -ESC_K,
+,                       0,
+,                       0,
+      -ESC_P,                  -ESC_Q,
+      -ESC_R,                  -ESC_S,
+,                       0,
+      -ESC_V,                  -ESC_W,
+      -ESC_X,                  0,
+      -ESC_Z,                  CHAR_LEFT_SQUARE_BRACKET,
+      CHAR_BACKSLASH,          CHAR_RIGHT_SQUARE_BRACKET,
+      CHAR_CIRCUMFLEX_ACCENT,  CHAR_UNDERSCORE,
+      CHAR_GRAVE_ACCENT,       7,
+      -ESC_b,                  0,
+      -ESC_d,                  ESC_e,
+      ESC_f,                   0,
+      -ESC_h,                  0,
+,                       -ESC_k,
+,                       0,
+      ESC_n,                   0,
+      -ESC_p,                  0,
+      ESC_r,                   -ESC_s,
+      ESC_tee,                 0,
+      -ESC_v,                  -ESC_w,
+,                       0,
+      -ESC_z
  };
- #else           /* This is the "abnormal" table for EBCDIC systems */
+ #else
+ /* This is the "abnormal" table for EBCDIC systems without UTF-8 support. */
  static const short int escapes[] = {
  /*  48 */     0,     0,      0,     '.',    '<',   '(',    '+',    '|',
  /*  50 */   '&',     0,      0,       0,      0,     0,      0,      0,
-Line 120 
 static const short int escapes[] = {
+Line 165 
 static const short int escapes[] = {
  /*  B8 */     0,     0,      0,       0,      0,   ']',    '=',    '-',
  /*  C0 */   '{',-ESC_A, -ESC_B,  -ESC_C, -ESC_D,-ESC_E,      0, -ESC_G,
  /*  C8 */-ESC_H,     0,      0,       0,      0,     0,      0,      0,
- /*  D0 */   '}',     0,      0,       0,      0,     0,      0, -ESC_P,
+ /*  D0 */   '}',     0, -ESC_K,       0,      0,     0,      0, -ESC_P,
  /*  D8 */-ESC_Q,-ESC_R,      0,       0,      0,     0,      0,      0,
  /*  E0 */  '\\',     0, -ESC_S,       0,      0,-ESC_V, -ESC_W, -ESC_X,
  /*  E8 */     0,-ESC_Z,      0,       0,      0,     0,      0,      0,
-Line 130 
 static const short int escapes[] = {
+Line 175 
 static const short int escapes[] = {
  #endif
- /* Tables of names of POSIX character classes and their lengths. The list is
+ /* Table of special "verbs" like (*PRUNE). This is a short table, so it is
- terminated by a zero length entry. The first three must be alpha, lower, upper,
+ searched linearly. Put all the names into a single string, in order to reduce
- as this is assumed for handling case independence. */
+ the number of relocations when a shared library is dynamically linked. The
+ string is built from string macros so that it works in UTF-8 mode on EBCDIC
- static const char *const posix_names[] = {
+ platforms. */
-   "alpha", "lower", "upper",
-   "alnum", "ascii", "blank", "cntrl", "digit", "graph",
+ typedef struct verbitem {
-   "print", "punct", "space", "word",  "xdigit" };
+   int   len;
+   int   op;
+ } verbitem;
+ static const char verbnames[] =
+   STRING_ACCEPT0
+   STRING_COMMIT0
+   STRING_F0
+   STRING_FAIL0
+   STRING_PRUNE0
+   STRING_SKIP0
+   STRING_THEN;
+ static const verbitem verbs[] = {
+   { 6, OP_ACCEPT },
+   { 6, OP_COMMIT },
+   { 1, OP_FAIL },
+   { 4, OP_FAIL },
+   { 5, OP_PRUNE },
+   { 4, OP_SKIP  },
+   { 4, OP_THEN  }
+ };
+ static const int verbcount = sizeof(verbs)/sizeof(verbitem);
+ /* Tables of names of POSIX character classes and their lengths. The names are
+ now all in a single string, to reduce the number of relocations when a shared
+ library is dynamically loaded. The list of lengths is terminated by a zero
+ length entry. The first three must be alpha, lower, upper, as this is assumed
+ for handling case independence. */
+ static const char posix_names[] =
+   STRING_alpha0 STRING_lower0 STRING_upper0 STRING_alnum0
+   STRING_ascii0 STRING_blank0 STRING_cntrl0 STRING_digit0
+   STRING_graph0 STRING_print0 STRING_punct0 STRING_space0
+   STRING_word0  STRING_xdigit;
  static const uschar posix_name_lengths[] = {
 , 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 4, 6, 0 };
-Line 176 
 static const int posix_class_maps[] = {
+Line 257 
 static const int posix_class_maps[] = {
  /* The texts of compile-time error messages. These are "char *" because they
  are passed to the outside world. Do not ever re-use any error number, because
  they are documented. Always add a new error instead. Messages marked DEAD below
- are no longer used. */
+ are no longer used. This used to be a table of strings, but in order to reduce
+ the number of relocations needed when a shared library is loaded dynamically,
- static const char *error_texts[] = {
+ it is now one long string. We cannot use a table of offsets, because the
-   "no error",
+ lengths of inserts such as XSTRING(MAX_NAME_SIZE) are not known. Instead, we
-   "\\ at end of pattern",
+ simply count through to the one we want - this isn't a performance issue
-   "\\c at end of pattern",
+ because these strings are used only when there is a compilation error. */
-   "unrecognized character follows \\",
-   "numbers out of order in {} quantifier",
+ static const char error_texts[] =
+   "no error\0"
+   "\\ at end of pattern\0"
+   "\\c at end of pattern\0"
+   "unrecognized character follows \\\0"
+   "numbers out of order in {} quantifier\0"
    /* 5 */
-   "number too big in {} quantifier",
+   "number too big in {} quantifier\0"
-   "missing terminating ] for character class",
+   "missing terminating ] for character class\0"
-   "invalid escape sequence in character class",
+   "invalid escape sequence in character class\0"
-   "range out of order in character class",
+   "range out of order in character class\0"
-   "nothing to repeat",
+   "nothing to repeat\0"
    /* 10 */
-   "operand of unlimited repeat could match the empty string",  /** DEAD **/
+   "operand of unlimited repeat could match the empty string\0"  /** DEAD **/
-   "internal error: unexpected repeat",
+   "internal error: unexpected repeat\0"
-   "unrecognized character after (?",
+   "unrecognized character after (? or (?-\0"
-   "POSIX named classes are supported only within a class",
+   "POSIX named classes are supported only within a class\0"
-   "missing )",
+   "missing )\0"
    /* 15 */
-   "reference to non-existent subpattern",
+   "reference to non-existent subpattern\0"
-   "erroffset passed as NULL",
+   "erroffset passed as NULL\0"
-   "unknown option bit(s) set",
+   "unknown option bit(s) set\0"
-   "missing ) after comment",
+   "missing ) after comment\0"
-   "parentheses nested too deeply",  /** DEAD **/
+   "parentheses nested too deeply\0"  /** DEAD **/
    /* 20 */
-   "regular expression too large",
+   "regular expression is too large\0"
-   "failed to get memory",
+   "failed to get memory\0"
-   "unmatched parentheses",
+   "unmatched parentheses\0"
-   "internal error: code overflow",
+   "internal error: code overflow\0"
-   "unrecognized character after (?<",
+   "unrecognized character after (?<\0"
    /* 25 */
-   "lookbehind assertion is not fixed length",
+   "lookbehind assertion is not fixed length\0"
-   "malformed number or name after (?(",
+   "malformed number or name after (?(\0"
-   "conditional group contains more than two branches",
+   "conditional group contains more than two branches\0"
-   "assertion expected after (?(",
+   "assertion expected after (?(\0"
-   "(?R or (?[+-]digits must be followed by )",
+   "(?R or (?[+-]digits must be followed by )\0"
    /* 30 */
-   "unknown POSIX class name",
+   "unknown POSIX class name\0"
-   "POSIX collating elements are not supported",
+   "POSIX collating elements are not supported\0"
-   "this version of PCRE is not compiled with PCRE_UTF8 support",
+   "this version of PCRE is not compiled with PCRE_UTF8 support\0"
-   "spare error",  /** DEAD **/
+   "spare error\0"  /** DEAD **/
-   "character value in \\x{...} sequence is too large",
+   "character value in \\x{...} sequence is too large\0"
    /* 35 */
-   "invalid condition (?(0)",
+   "invalid condition (?(0)\0"
-   "\\C not allowed in lookbehind assertion",
+   "\\C not allowed in lookbehind assertion\0"
-   "PCRE does not support \\L, \\l, \\N, \\U, or \\u",
+   "PCRE does not support \\L, \\l, \\N, \\U, or \\u\0"
-   "number after (?C is > 255",
+   "number after (?C is > 255\0"
-   "closing ) for (?C expected",
+   "closing ) for (?C expected\0"
    /* 40 */
-   "recursive call could loop indefinitely",
+   "recursive call could loop indefinitely\0"
-   "unrecognized character after (?P",
+   "unrecognized character after (?P\0"
-   "syntax error in subpattern name (missing terminator)",
+   "syntax error in subpattern name (missing terminator)\0"
-   "two named subpatterns have the same name",
+   "two named subpatterns have the same name\0"
-   "invalid UTF-8 string",
+   "invalid UTF-8 string\0"
    /* 45 */
-   "support for \\P, \\p, and \\X has not been compiled",
+   "support for \\P, \\p, and \\X has not been compiled\0"
-   "malformed \\P or \\p sequence",
+   "malformed \\P or \\p sequence\0"
-   "unknown property name after \\P or \\p",
+   "unknown property name after \\P or \\p\0"
-   "subpattern name is too long (maximum " XSTRING(MAX_NAME_SIZE) " characters)",
+   "subpattern name is too long (maximum " XSTRING(MAX_NAME_SIZE) " characters)\0"
-   "too many named subpatterns (maximum " XSTRING(MAX_NAME_COUNT) ")",
+   "too many named subpatterns (maximum " XSTRING(MAX_NAME_COUNT) ")\0"
    /* 50 */
-   "repeated subpattern is too long",
+   "repeated subpattern is too long\0"    /** DEAD **/
-   "octal value is greater than \\377 (not in UTF-8 mode)",
+   "octal value is greater than \\377 (not in UTF-8 mode)\0"
-   "internal error: overran compiling workspace",
+   "internal error: overran compiling workspace\0"
-   "internal error: previously-checked referenced subpattern not found",
+   "internal error: previously-checked referenced subpattern not found\0"
-   "DEFINE group contains more than one branch",
+   "DEFINE group contains more than one branch\0"
    /* 55 */
-   "repeating a DEFINE group is not allowed",
+   "repeating a DEFINE group is not allowed\0"
-   "inconsistent NEWLINE options",
+   "inconsistent NEWLINE options\0"
-   "\\g is not followed by a braced name or an optionally braced non-zero number",
+   "\\g is not followed by a braced, angle-bracketed, or quoted name/number or by a plain number\0"
-   "(?+ or (?- or (?(+ or (?(- must be followed by a non-zero number"
+   "a numbered reference must not be zero\0"
- };
+   "(*VERB) with an argument is not supported\0"
+   /* 60 */
+   "(*VERB) not recognized\0"
+   "number is too big\0"
+   "subpattern name expected\0"
+   "digit expected after (?+\0"
+   "] is an invalid data character in JavaScript compatibility mode";
  /* Table to identify digits and hex digits. This is used when compiling
-Line 268 
 For convenience, we use the same bit def
+Line 360 
 For convenience, we use the same bit def
  Then we can use ctype_digit and ctype_xdigit in the code. */
- #ifndef EBCDIC  /* This is the "normal" case, for ASCII systems */
+ #ifndef EBCDIC
+ /* This is the "normal" case, for ASCII systems, and EBCDIC systems running in
+ UTF-8 mode. */
  static const unsigned char digitab[] =
    {
 x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*   0-  7 */
-Line 304 
 static const unsigned char digitab[] =
+Line 400 
 static const unsigned char digitab[] =
 x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 240-247 */
 x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};/* 248-255 */
- #else           /* This is the "abnormal" case, for EBCDIC systems */
+ #else
+ /* This is the "abnormal" case, for EBCDIC systems not running in UTF-8 mode. */
  static const unsigned char digitab[] =
    {
 x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*   0-  7  0 */
-Line 379 
 static const unsigned char ebcdic_charta
+Line 478 
 static const unsigned char ebcdic_charta
  /* Definition to allow mutual recursion */
  static BOOL
    compile_regex(int, int, uschar **, const uschar **, int *, BOOL, BOOL, int,
      int *, int *, branch_chain *, compile_data *, int *);
  /*************************************************
+ *            Find an error text                  *
+ *************************************************/
+ /* The error texts are now all in one long string, to save on relocations. As
+ some of the text is of unknown length, we can't use a table of offsets.
+ Instead, just count through the strings. This is not a performance issue
+ because it happens only when there has been a compilation error.
+ Argument:   the error number
+ Returns:    pointer to the error string
+ */
+ static const char *
+ find_error_text(int n)
+ {
+ const char *s = error_texts;
+ for (; n > 0; n--) while (*s++ != 0) {};
+ return s;
+ }
+ /*************************************************
  *            Handle escapes                      *
  *************************************************/
-Line 405 
 Arguments:
+Line 526 
 Arguments:
  Returns:         zero or positive => a data character
                   negative => a special escape sequence
-                  on error, errorptr is set
+                  on error, errorcodeptr is set
  */
  static int
-Line 423 
 ptr--;                            /* Set
+Line 544 
 ptr--;                            /* Set
  if (c == 0) *errorcodeptr = ERR1;
- /* Non-alphamerics are literals. For digits or letters, do an initial lookup in
+ /* Non-alphanumerics are literals. For digits or letters, do an initial lookup
- a table. A non-zero result is something that can be returned immediately.
+ in a table. A non-zero result is something that can be returned immediately.
  Otherwise further processing may be required. */
- #ifndef EBCDIC  /* ASCII coding */
+ #ifndef EBCDIC  /* ASCII/UTF-8 coding */
- else if (c < '0' || c > 'z') {}                           /* Not alphameric */
+ else if (c < CHAR_0 || c > CHAR_z) {}                     /* Not alphanumeric */
- else if ((i = escapes[c - '0']) != 0) c = i;
+ else if ((i = escapes[c - CHAR_0]) != 0) c = i;
  #else           /* EBCDIC coding */
- else if (c < 'a' || (ebcdic_chartab[c] & 0x0E) == 0) {}   /* Not alphameric */
+ else if (c < 'a' || (ebcdic_chartab[c] & 0x0E) == 0) {}   /* Not alphanumeric */
  else if ((i = escapes[c - 0x48]) != 0)  c = i;
  #endif
-Line 448 
 else
+Line 569 
 else
      /* A number of Perl escapes are not handled by PCRE. We give an explicit
      error. */
-     case 'l':
+     case CHAR_l:
-     case 'L':
+     case CHAR_L:
-     case 'N':
+     case CHAR_N:
-     case 'u':
+     case CHAR_u:
-     case 'U':
+     case CHAR_U:
      *errorcodeptr = ERR37;
      break;
-     /* \g must be followed by a number, either plain or braced. If positive, it
+     /* \g must be followed by one of a number of specific things:
-     is an absolute backreference. If negative, it is a relative backreference.
-     This is a Perl 5.10 feature. Perl 5.10 also supports \g{name} as a
+     (1) A number, either plain or braced. If positive, it is an absolute
-     reference to a named group. This is part of Perl's movement towards a
+     backreference. If negative, it is a relative backreference. This is a Perl
-     unified syntax for back references. As this is synonymous with \k{name}, we
+.10 feature.
-     fudge it up by pretending it really was \k. */
+     (2) Perl 5.10 also supports \g{name} as a reference to a named group. This
+     is part of Perl's movement towards a unified syntax for back references. As
+     this is synonymous with \k{name}, we fudge it up by pretending it really
+     was \k.
+     (3) For Oniguruma compatibility we also support \g followed by a name or a
+     number either in angle brackets or in single quotes. However, these are
+     (possibly recursive) subroutine calls, _not_ backreferences. Just return
+     the -ESC_g code (cf \k). */
+     case CHAR_g:
+     if (ptr[1] == CHAR_LESS_THAN_SIGN || ptr[1] == CHAR_APOSTROPHE)
+       {
+       c = -ESC_g;
+       break;
+       }
+     /* Handle the Perl-compatible cases */
-     case 'g':
+     if (ptr[1] == CHAR_LEFT_CURLY_BRACKET)
-     if (ptr[1] == '{')
        {
        const uschar *p;
-       for (p = ptr+2; *p != 0 && *p != '}'; p++)
+       for (p = ptr+2; *p != 0 && *p != CHAR_RIGHT_CURLY_BRACKET; p++)
-         if (*p != '-' && (digitab[*p] & ctype_digit) == 0) break;
+         if (*p != CHAR_MINUS && (digitab[*p] & ctype_digit) == 0) break;
-       if (*p != 0 && *p != '}')
+       if (*p != 0 && *p != CHAR_RIGHT_CURLY_BRACKET)
          {
          c = -ESC_k;
          break;
-Line 479 
 else
+Line 617 
 else
        }
      else braced = FALSE;
-     if (ptr[1] == '-')
+     if (ptr[1] == CHAR_MINUS)
        {
        negated = TRUE;
        ptr++;
-Line 488 
 else
+Line 626 
 else
      c = 0;
      while ((digitab[ptr[1]] & ctype_digit) != 0)
-       c = c * 10 + *(++ptr) - '0';
+       c = c * 10 + *(++ptr) - CHAR_0;
-     if (c == 0 || (braced && *(++ptr) != '}'))
+     if (c < 0)   /* Integer overflow */
+       {
+       *errorcodeptr = ERR61;
+       break;
+       }
+     if (braced && *(++ptr) != CHAR_RIGHT_CURLY_BRACKET)
        {
        *errorcodeptr = ERR57;
-       return 0;
+       break;
+       }
+     if (c == 0)
+       {
+       *errorcodeptr = ERR58;
+       break;
        }
      if (negated)
-Line 501 
 else
+Line 651 
 else
        if (c > bracount)
          {
          *errorcodeptr = ERR15;
-         return 0;
+         break;
          }
        c = bracount - (c - 1);
        }
-Line 521 
 else
+Line 671 
 else
      value is greater than 377, the least significant 8 bits are taken. Inside a
      character class, \ followed by a digit is always an octal number. */
-     case '1': case '2': case '3': case '4': case '5':
+     case CHAR_1: case CHAR_2: case CHAR_3: case CHAR_4: case CHAR_5:
-     case '6': case '7': case '8': case '9':
+     case CHAR_6: case CHAR_7: case CHAR_8: case CHAR_9:
      if (!isclass)
        {
        oldptr = ptr;
-       c -= '0';
+       c -= CHAR_0;
        while ((digitab[ptr[1]] & ctype_digit) != 0)
-         c = c * 10 + *(++ptr) - '0';
+         c = c * 10 + *(++ptr) - CHAR_0;
+       if (c < 0)    /* Integer overflow */
+         {
+         *errorcodeptr = ERR61;
+         break;
+         }
        if (c < 10 || c <= bracount)
          {
          c = -(ESC_REF + c);
-Line 542 
 else
+Line 697 
 else
      generates a binary zero byte and treats the digit as a following literal.
      Thus we have to pull back the pointer by one. */
-     if ((c = *ptr) >= '8')
+     if ((c = *ptr) >= CHAR_8)
        {
        ptr--;
        c = 0;
-Line 555 
 else
+Line 710 
 else
      to do). Nowadays we allow for larger numbers in UTF-8 mode, but no more
      than 3 octal digits. */
-     case '0':
+     case CHAR_0:
-     c -= '0';
+     c -= CHAR_0;
-     while(i++ < 2 && ptr[1] >= '0' && ptr[1] <= '7')
+     while(i++ < 2 && ptr[1] >= CHAR_0 && ptr[1] <= CHAR_7)
-         c = c * 8 + *(++ptr) - '0';
+         c = c * 8 + *(++ptr) - CHAR_0;
      if (!utf8 && c > 255) *errorcodeptr = ERR51;
      break;
-Line 566 
 else
+Line 721 
 else
      than 0xff in utf8 mode, but only if the ddd are hex digits. If not, { is
      treated as a data character. */
-     case 'x':
+     case CHAR_x:
-     if (ptr[1] == '{')
+     if (ptr[1] == CHAR_LEFT_CURLY_BRACKET)
        {
        const uschar *pt = ptr + 2;
        int count = 0;
-Line 576 
 else
+Line 731 
 else
        while ((digitab[*pt] & ctype_xdigit) != 0)
          {
          register int cc = *pt++;
-         if (c == 0 && cc == '0') continue;     /* Leading zeroes */
+         if (c == 0 && cc == CHAR_0) continue;     /* Leading zeroes */
          count++;
- #ifndef EBCDIC  /* ASCII coding */
+ #ifndef EBCDIC  /* ASCII/UTF-8 coding */
-         if (cc >= 'a') cc -= 32;               /* Convert to upper case */
+         if (cc >= CHAR_a) cc -= 32;               /* Convert to upper case */
-         c = (c << 4) + cc - ((cc < 'A')? '0' : ('A' - 10));
+         c = (c << 4) + cc - ((cc < CHAR_A)? CHAR_0 : (CHAR_A - 10));
  #else           /* EBCDIC coding */
-         if (cc >= 'a' && cc <= 'z') cc += 64;  /* Convert to upper case */
+         if (cc >= CHAR_a && cc <= CHAR_z) cc += 64;  /* Convert to upper case */
-         c = (c << 4) + cc - ((cc >= '0')? '0' : ('A' - 10));
+         c = (c << 4) + cc - ((cc >= CHAR_0)? CHAR_0 : (CHAR_A - 10));
  #endif
          }
-       if (*pt == '}')
+       if (*pt == CHAR_RIGHT_CURLY_BRACKET)
          {
          if (c < 0 || count > (utf8? 8 : 2)) *errorcodeptr = ERR34;
          ptr = pt;
-Line 604 
 else
+Line 759 
 else
      c = 0;
      while (i++ < 2 && (digitab[ptr[1]] & ctype_xdigit) != 0)
        {
-       int cc;                               /* Some compilers don't like ++ */
+       int cc;                                  /* Some compilers don't like */
-       cc = *(++ptr);                        /* in initializers */
+       cc = *(++ptr);                           /* ++ in initializers */
- #ifndef EBCDIC  /* ASCII coding */
+ #ifndef EBCDIC  /* ASCII/UTF-8 coding */
-       if (cc >= 'a') cc -= 32;              /* Convert to upper case */
+       if (cc >= CHAR_a) cc -= 32;              /* Convert to upper case */
-       c = c * 16 + cc - ((cc < 'A')? '0' : ('A' - 10));
+       c = c * 16 + cc - ((cc < CHAR_A)? CHAR_0 : (CHAR_A - 10));
  #else           /* EBCDIC coding */
-       if (cc <= 'z') cc += 64;              /* Convert to upper case */
+       if (cc <= CHAR_z) cc += 64;              /* Convert to upper case */
-       c = c * 16 + cc - ((cc >= '0')? '0' : ('A' - 10));
+       c = c * 16 + cc - ((cc >= CHAR_0)? CHAR_0 : (CHAR_A - 10));
  #endif
        }
      break;
-Line 620 
 else
+Line 775 
 else
      This coding is ASCII-specific, but then the whole concept of \cx is
      ASCII-specific. (However, an EBCDIC equivalent has now been added.) */
-     case 'c':
+     case CHAR_c:
      c = *(++ptr);
      if (c == 0)
        {
        *errorcodeptr = ERR2;
-       return 0;
+       break;
        }
- #ifndef EBCDIC  /* ASCII coding */
+ #ifndef EBCDIC  /* ASCII/UTF-8 coding */
-     if (c >= 'a' && c <= 'z') c -= 32;
+     if (c >= CHAR_a && c <= CHAR_z) c -= 32;
      c ^= 0x40;
  #else           /* EBCDIC coding */
-     if (c >= 'a' && c <= 'z') c += 64;
+     if (c >= CHAR_a && c <= CHAR_z) c += 64;
      c ^= 0xC0;
  #endif
      break;
      /* PCRE_EXTRA enables extensions to Perl in the matter of escapes. Any
-     other alphameric following \ is an error if PCRE_EXTRA was set; otherwise,
+     other alphanumeric following \ is an error if PCRE_EXTRA was set;
-     for Perl compatibility, it is a literal. This code looks a bit odd, but
+     otherwise, for Perl compatibility, it is a literal. This code looks a bit
-     there used to be some cases other than the default, and there may be again
+     odd, but there used to be some cases other than the default, and there may
-     in future, so I haven't "optimized" it. */
+     be again in future, so I haven't "optimized" it. */
      default:
      if ((options & PCRE_EXTRA) != 0) switch(c)
-Line 694 
 if (c == 0) goto ERROR_RETURN;
+Line 849 
 if (c == 0) goto ERROR_RETURN;
  /* \P or \p can be followed by a name in {}, optionally preceded by ^ for
  negation. */
- if (c == '{')
+ if (c == CHAR_LEFT_CURLY_BRACKET)
    {
-   if (ptr[1] == '^')
+   if (ptr[1] == CHAR_CIRCUMFLEX_ACCENT)
      {
      *negptr = TRUE;
      ptr++;
      }
-   for (i = 0; i < sizeof(name) - 1; i++)
+   for (i = 0; i < (int)sizeof(name) - 1; i++)
      {
      c = *(++ptr);
      if (c == 0) goto ERROR_RETURN;
-     if (c == '}') break;
+     if (c == CHAR_RIGHT_CURLY_BRACKET) break;
      name[i] = c;
      }
-   if (c !='}') goto ERROR_RETURN;
+   if (c != CHAR_RIGHT_CURLY_BRACKET) goto ERROR_RETURN;
    name[i] = 0;
    }
-Line 730 
 top = _pcre_utt_size;
+Line 885 
 top = _pcre_utt_size;
  while (bot < top)
    {
    i = (bot + top) >> 1;
-   c = strcmp(name, _pcre_utt[i].name);
+   c = strcmp(name, _pcre_utt_names + _pcre_utt[i].name_offset);
    if (c == 0)
      {
      *dptr = _pcre_utt[i].value;
-Line 773 
 is_counted_repeat(const uschar *p)
+Line 928 
 is_counted_repeat(const uschar *p)
  {
  if ((digitab[*p++] & ctype_digit) == 0) return FALSE;
  while ((digitab[*p] & ctype_digit) != 0) p++;
- if (*p == '}') return TRUE;
+ if (*p == CHAR_RIGHT_CURLY_BRACKET) return TRUE;
- if (*p++ != ',') return FALSE;
+ if (*p++ != CHAR_COMMA) return FALSE;
- if (*p == '}') return TRUE;
+ if (*p == CHAR_RIGHT_CURLY_BRACKET) return TRUE;
  if ((digitab[*p++] & ctype_digit) == 0) return FALSE;
  while ((digitab[*p] & ctype_digit) != 0) p++;
- return (*p == '}');
+ return (*p == CHAR_RIGHT_CURLY_BRACKET);
  }
-Line 814 
 int max = -1;
+Line 969 
 int max = -1;
  /* Read the minimum value and do a paranoid check: a negative value indicates
  an integer overflow. */
- while ((digitab[*p] & ctype_digit) != 0) min = min * 10 + *p++ - '0';
+ while ((digitab[*p] & ctype_digit) != 0) min = min * 10 + *p++ - CHAR_0;
  if (min < 0 || min > 65535)
    {
    *errorcodeptr = ERR5;
-Line 824 
 if (min < 0 || min > 65535)
+Line 979 
 if (min < 0 || min > 65535)
  /* Read the maximum value if there is one, and again do a paranoid on its size.
  Also, max must not be less than min. */
- if (*p == '}') max = min; else
+ if (*p == CHAR_RIGHT_CURLY_BRACKET) max = min; else
    {
-   if (*(++p) != '}')
+   if (*(++p) != CHAR_RIGHT_CURLY_BRACKET)
      {
      max = 0;
-     while((digitab[*p] & ctype_digit) != 0) max = max * 10 + *p++ - '0';
+     while((digitab[*p] & ctype_digit) != 0) max = max * 10 + *p++ - CHAR_0;
      if (max < 0 || max > 65535)
        {
        *errorcodeptr = ERR5;
-Line 854 
 return p;
+Line 1009 
 return p;
  /*************************************************
- *       Find forward referenced subpattern       *
+ *  Subroutine for finding forward reference      *
  *************************************************/
- /* This function scans along a pattern's text looking for capturing
+ /* This recursive function is called only from find_parens() below. The
+ top-level call starts at the beginning of the pattern. All other calls must
+ start at a parenthesis. It scans along a pattern's text looking for capturing
  subpatterns, and counting them. If it finds a named pattern that matches the
  name it is given, it returns its number. Alternatively, if the name is NULL, it
- returns when it reaches a given numbered subpattern. This is used for forward
+ returns when it reaches a given numbered subpattern. We know that if (?P< is
- references to subpatterns. We know that if (?P< is encountered, the name will
+ encountered, the name will be terminated by '>' because that is checked in the
- be terminated by '>' because that is checked in the first pass.
+ first pass. Recursion is used to keep track of subpatterns that reset the
+ capturing group numbers - the (?| feature.
  Arguments:
-   ptr          current position in the pattern
+   ptrptr       address of the current character pointer (updated)
-   count        current count of capturing parens so far encountered
+   cd           compile background data
    name         name to seek, or NULL if seeking a numbered subpattern
    lorn         name length, or subpattern number if name is NULL
    xmode        TRUE if we are in /x mode
+   count        pointer to the current capturing subpattern number (updated)
  Returns:       the number of the named subpattern, or -1 if not found
  */
  static int
- find_parens(const uschar *ptr, int count, const uschar *name, int lorn,
+ find_parens_sub(uschar **ptrptr, compile_data *cd, const uschar *name, int lorn,
-   BOOL xmode)
+   BOOL xmode, int *count)
  {
- const uschar *thisname;
+ uschar *ptr = *ptrptr;
+ int start_count = *count;
+ int hwm_count = start_count;
+ BOOL dup_parens = FALSE;
- for (; *ptr != 0; ptr++)
+ /* If the first character is a parenthesis, check on the type of group we are
+ dealing with. The very first call may not start with a parenthesis. */
+ if (ptr[0] == CHAR_LEFT_PARENTHESIS)
    {
-   int term;
+   if (ptr[1] == CHAR_QUESTION_MARK &&
+       ptr[2] == CHAR_VERTICAL_LINE)
+     {
+     ptr += 3;
+     dup_parens = TRUE;
+     }
+   /* Handle a normal, unnamed capturing parenthesis */
+   else if (ptr[1] != CHAR_QUESTION_MARK && ptr[1] != CHAR_ASTERISK)
+     {
+     *count += 1;
+     if (name == NULL && *count == lorn) return *count;
+     ptr++;
+     }
+   /* Handle a condition. If it is an assertion, just carry on so that it
+   is processed as normal. If not, skip to the closing parenthesis of the
+   condition (there can't be any nested parens. */
+   else if (ptr[2] == CHAR_LEFT_PARENTHESIS)
+     {
+     ptr += 2;
+     if (ptr[1] != CHAR_QUESTION_MARK)
+       {
+       while (*ptr != 0 && *ptr != CHAR_RIGHT_PARENTHESIS) ptr++;
+       if (*ptr != 0) ptr++;
+       }
+     }
+   /* We have either (? or (* and not a condition */
+   else
+     {
+     ptr += 2;
+     if (*ptr == CHAR_P) ptr++;                      /* Allow optional P */
+     /* We have to disambiguate (?<! and (?<= from (?<name> for named groups */
+     if ((*ptr == CHAR_LESS_THAN_SIGN && ptr[1] != CHAR_EXCLAMATION_MARK &&
+         ptr[1] != CHAR_EQUALS_SIGN) || *ptr == CHAR_APOSTROPHE)
+       {
+       int term;
+       const uschar *thisname;
+       *count += 1;
+       if (name == NULL && *count == lorn) return *count;
+       term = *ptr++;
+       if (term == CHAR_LESS_THAN_SIGN) term = CHAR_GREATER_THAN_SIGN;
+       thisname = ptr;
+       while (*ptr != term) ptr++;
+       if (name != NULL && lorn == ptr - thisname &&
+           strncmp((const char *)name, (const char *)thisname, lorn) == 0)
+         return *count;
+       term++;
+       }
+     }
+   }
+ /* Past any initial parenthesis handling, scan for parentheses or vertical
+ bars. */
+ for (; *ptr != 0; ptr++)
+   {
    /* Skip over backslashed characters and also entire \Q...\E */
-   if (*ptr == '\\')
+   if (*ptr == CHAR_BACKSLASH)
      {
-     if (*(++ptr) == 0) return -1;
+     if (*(++ptr) == 0) goto FAIL_EXIT;
-     if (*ptr == 'Q') for (;;)
+     if (*ptr == CHAR_Q) for (;;)
        {
-       while (*(++ptr) != 0 && *ptr != '\\');
+       while (*(++ptr) != 0 && *ptr != CHAR_BACKSLASH) {};
-       if (*ptr == 0) return -1;
+       if (*ptr == 0) goto FAIL_EXIT;
-       if (*(++ptr) == 'E') break;
+       if (*(++ptr) == CHAR_E) break;
        }
      continue;
      }
-   /* Skip over character classes */
+   /* Skip over character classes; this logic must be similar to the way they
+   are handled for real. If the first character is '^', skip it. Also, if the
+   first few characters (either before or after ^) are \Q\E or \E we skip them
+   too. This makes for compatibility with Perl. Note the use of STR macros to
+   encode "Q\\E" so that it works in UTF-8 on EBCDIC platforms. */
+   if (*ptr == CHAR_LEFT_SQUARE_BRACKET)
+     {
+     BOOL negate_class = FALSE;
+     for (;;)
+       {
+       if (ptr[1] == CHAR_BACKSLASH)
+         {
+         if (ptr[2] == CHAR_E)
+           ptr+= 2;
+         else if (strncmp((const char *)ptr+2,
+                  STR_Q STR_BACKSLASH STR_E, 3) == 0)
+           ptr += 4;
+         else
+           break;
+         }
+       else if (!negate_class && ptr[1] == CHAR_CIRCUMFLEX_ACCENT)
+         {
+         negate_class = TRUE;
+         ptr++;
+         }
+       else break;
+       }
-   if (*ptr == '[')
+     /* If the next character is ']', it is a data character that must be
-     {
+     skipped, except in JavaScript compatibility mode. */
-     while (*(++ptr) != ']')
+     if (ptr[1] == CHAR_RIGHT_SQUARE_BRACKET &&
+         (cd->external_options & PCRE_JAVASCRIPT_COMPAT) == 0)
+       ptr++;
+     while (*(++ptr) != CHAR_RIGHT_SQUARE_BRACKET)
        {
-       if (*ptr == '\\')
+       if (*ptr == 0) return -1;
+       if (*ptr == CHAR_BACKSLASH)
          {
-         if (*(++ptr) == 0) return -1;
+         if (*(++ptr) == 0) goto FAIL_EXIT;
-         if (*ptr == 'Q') for (;;)
+         if (*ptr == CHAR_Q) for (;;)
            {
-           while (*(++ptr) != 0 && *ptr != '\\');
+           while (*(++ptr) != 0 && *ptr != CHAR_BACKSLASH) {};
-           if (*ptr == 0) return -1;
+           if (*ptr == 0) goto FAIL_EXIT;
-           if (*(++ptr) == 'E') break;
+           if (*(++ptr) == CHAR_E) break;
            }
          continue;
          }
-Line 921 
 for (; *ptr != 0; ptr++)
+Line 1180 
 for (; *ptr != 0; ptr++)
    /* Skip comments in /x mode */
-   if (xmode && *ptr == '#')
+   if (xmode && *ptr == CHAR_NUMBER_SIGN)
      {
-     while (*(++ptr) != 0 && *ptr != '\n');
+     while (*(++ptr) != 0 && *ptr != CHAR_NL) {};
-     if (*ptr == 0) return -1;
+     if (*ptr == 0) goto FAIL_EXIT;
      continue;
      }
-   /* An opening parens must now be a real metacharacter */
+   /* Check for the special metacharacters */
-   if (*ptr != '(') continue;
+   if (*ptr == CHAR_LEFT_PARENTHESIS)
-   if (ptr[1] != '?')
      {
-     count++;
+     int rc = find_parens_sub(&ptr, cd, name, lorn, xmode, count);
-     if (name == NULL && count == lorn) return count;
+     if (rc > 0) return rc;
-     continue;
+     if (*ptr == 0) goto FAIL_EXIT;
      }
-   ptr += 2;
+   else if (*ptr == CHAR_RIGHT_PARENTHESIS)
-   if (*ptr == 'P') ptr++;                      /* Allow optional P */
+     {
+     if (dup_parens && *count < hwm_count) *count = hwm_count;
+     *ptrptr = ptr;
+     return -1;
+     }
-   /* We have to disambiguate (?<! and (?<= from (?<name> */
+   else if (*ptr == CHAR_VERTICAL_LINE && dup_parens)
+     {
+     if (*count > hwm_count) hwm_count = *count;
+     *count = start_count;
+     }
+   }
-   if ((*ptr != '<' || ptr[1] == '!' || ptr[1] == '=') &&
+ FAIL_EXIT:
-        *ptr != '\'')
+ *ptrptr = ptr;
-     continue;
+ return -1;
+ }
+ /*************************************************
+ *       Find forward referenced subpattern       *
+ *************************************************/
+ /* This function scans along a pattern's text looking for capturing
+ subpatterns, and counting them. If it finds a named pattern that matches the
+ name it is given, it returns its number. Alternatively, if the name is NULL, it
+ returns when it reaches a given numbered subpattern. This is used for forward
+ references to subpatterns. We used to be able to start this scan from the
+ current compiling point, using the current count value from cd->bracount, and
+ do it all in a single loop, but the addition of the possibility of duplicate
+ subpattern numbers means that we have to scan from the very start, in order to
+ take account of such duplicates, and to use a recursive function to keep track
+ of the different types of group.
-   count++;
+ Arguments:
+   cd           compile background data
+   name         name to seek, or NULL if seeking a numbered subpattern
+   lorn         name length, or subpattern number if name is NULL
+   xmode        TRUE if we are in /x mode
-   if (name == NULL && count == lorn) return count;
+ Returns:       the number of the found subpattern, or -1 if not found
-   term = *ptr++;
+ */
-   if (term == '<') term = '>';
-   thisname = ptr;
+ static int
-   while (*ptr != term) ptr++;
+ find_parens(compile_data *cd, const uschar *name, int lorn, BOOL xmode)
-   if (name != NULL && lorn == ptr - thisname &&
+ {
-       strncmp((const char *)name, (const char *)thisname, lorn) == 0)
+ uschar *ptr = (uschar *)cd->start_pattern;
-     return count;
+ int count = 0;
+ int rc;
+ /* If the pattern does not start with an opening parenthesis, the first call
+ to find_parens_sub() will scan right to the end (if necessary). However, if it
+ does start with a parenthesis, find_parens_sub() will return when it hits the
+ matching closing parens. That is why we have to have a loop. */
+ for (;;)
+   {
+   rc = find_parens_sub(&ptr, cd, name, lorn, xmode, &count);
+   if (rc > 0 || *ptr++ == 0) break;
    }
- return -1;
+ return rc;
  }
  /*************************************************
  *      Find first significant op code            *
  *************************************************/
-Line 1059 
 for (;;)
+Line 1361 
 for (;;)
    {
    int d;
    register int op = *cc;
    switch (op)
      {
      case OP_CBRA:
-Line 1125 
 for (;;)
+Line 1426 
 for (;;)
      branchlength++;
      cc += 2;
  #ifdef SUPPORT_UTF8
-     if ((options & PCRE_UTF8) != 0)
+     if ((options & PCRE_UTF8) != 0 && cc[-1] >= 0xc0)
-       {
+       cc += _pcre_utf8_table4[cc[-1] & 0x3f];
-       while ((*cc & 0xc0) == 0x80) cc++;
-       }
  #endif
      break;
-Line 1139 
 for (;;)
+Line 1438 
 for (;;)
      branchlength += GET2(cc,1);
      cc += 4;
  #ifdef SUPPORT_UTF8
-     if ((options & PCRE_UTF8) != 0)
+     if ((options & PCRE_UTF8) != 0 && cc[-1] >= 0xc0)
-       {
+       cc += _pcre_utf8_table4[cc[-1] & 0x3f];
-       while((*cc & 0x80) == 0x80) cc++;
-       }
  #endif
      break;
      case OP_TYPEEXACT:
      branchlength += GET2(cc,1);
+     if (cc[3] == OP_PROP || cc[3] == OP_NOTPROP) cc += 2;
      cc += 4;
      break;
-Line 1165 
 for (;;)
+Line 1463 
 for (;;)
      case OP_NOT_WORDCHAR:
      case OP_WORDCHAR:
      case OP_ANY:
+     case OP_ALLANY:
      branchlength++;
      cc++;
      break;
-Line 1256 
 for (;;)
+Line 1555 
 for (;;)
      code += _pcre_OP_lengths[c];
      }
-   /* In UTF-8 mode, opcodes that are followed by a character may be followed by
+   /* Otherwise, we can get the item's length from the table, except that for
-   a multi-byte character. The length in the table is a minimum, so we have to
+   repeated character types, we have to test for \p and \P, which have an extra
-   arrange to skip the extra bytes. */
+   two bytes of parameters. */
    else
      {
+     switch(c)
+       {
+       case OP_TYPESTAR:
+       case OP_TYPEMINSTAR:
+       case OP_TYPEPLUS:
+       case OP_TYPEMINPLUS:
+       case OP_TYPEQUERY:
+       case OP_TYPEMINQUERY:
+       case OP_TYPEPOSSTAR:
+       case OP_TYPEPOSPLUS:
+       case OP_TYPEPOSQUERY:
+       if (code[1] == OP_PROP || code[1] == OP_NOTPROP) code += 2;
+       break;
+       case OP_TYPEUPTO:
+       case OP_TYPEMINUPTO:
+       case OP_TYPEEXACT:
+       case OP_TYPEPOSUPTO:
+       if (code[3] == OP_PROP || code[3] == OP_NOTPROP) code += 2;
+       break;
+       }
+     /* Add in the fixed length from the table */
      code += _pcre_OP_lengths[c];
+   /* In UTF-8 mode, opcodes that are followed by a character may be followed by
+   a multi-byte character. The length in the table is a minimum, so we have to
+   arrange to skip the extra bytes. */
  #ifdef SUPPORT_UTF8
      if (utf8) switch(c)
        {
-Line 1284 
 for (;;)
+Line 1612 
 for (;;)
        if (code[-1] >= 0xc0) code += _pcre_utf8_table4[code[-1] & 0x3f];
        break;
        }
+ #else
+     (void)(utf8);  /* Keep compiler happy by referencing function argument */
  #endif
      }
    }
-Line 1320 
 for (;;)
+Line 1650 
 for (;;)
    if (c == OP_XCLASS) code += GET(code, 1);
-   /* Otherwise, we get the item's length from the table. In UTF-8 mode, opcodes
+   /* Otherwise, we can get the item's length from the table, except that for
-   that are followed by a character may be followed by a multi-byte character.
+   repeated character types, we have to test for \p and \P, which have an extra
-   The length in the table is a minimum, so we have to arrange to skip the extra
+   two bytes of parameters. */
-   bytes. */
    else
      {
+     switch(c)
+       {
+       case OP_TYPESTAR:
+       case OP_TYPEMINSTAR:
+       case OP_TYPEPLUS:
+       case OP_TYPEMINPLUS:
+       case OP_TYPEQUERY:
+       case OP_TYPEMINQUERY:
+       case OP_TYPEPOSSTAR:
+       case OP_TYPEPOSPLUS:
+       case OP_TYPEPOSQUERY:
+       if (code[1] == OP_PROP || code[1] == OP_NOTPROP) code += 2;
+       break;
+       case OP_TYPEPOSUPTO:
+       case OP_TYPEUPTO:
+       case OP_TYPEMINUPTO:
+       case OP_TYPEEXACT:
+       if (code[3] == OP_PROP || code[3] == OP_NOTPROP) code += 2;
+       break;
+       }
+     /* Add in the fixed length from the table */
      code += _pcre_OP_lengths[c];
+     /* In UTF-8 mode, opcodes that are followed by a character may be followed
+     by a multi-byte character. The length in the table is a minimum, so we have
+     to arrange to skip the extra bytes. */
  #ifdef SUPPORT_UTF8
      if (utf8) switch(c)
        {
-Line 1349 
 for (;;)
+Line 1707 
 for (;;)
        if (code[-1] >= 0xc0) code += _pcre_utf8_table4[code[-1] & 0x3f];
        break;
        }
+ #else
+     (void)(utf8);  /* Keep compiler happy by referencing function argument */
  #endif
      }
    }
-Line 1364 
 for (;;)
+Line 1724 
 for (;;)
  can match the empty string or not. It is called from could_be_empty()
  below and from compile_branch() when checking for an unlimited repeat of a
  group that can match nothing. Note that first_significant_code() skips over
- assertions. If we hit an unclosed bracket, we return "empty" - this means we've
+ backward and negative forward assertions when its final argument is TRUE. If we
- struck an inner bracket whose current branch will already have been scanned.
+ hit an unclosed bracket, we return "empty" - this means we've struck an inner
+ bracket whose current branch will already have been scanned.
  Arguments:
    code        points to start of search
-Line 1387 
 for (code = first_significant_code(code
+Line 1748 
 for (code = first_significant_code(code
    c = *code;
+   /* Skip over forward assertions; the other assertions are skipped by
+   first_significant_code() with a TRUE final argument. */
+   if (c == OP_ASSERT)
+     {
+     do code += GET(code, 1); while (*code == OP_ALT);
+     c = *code;
+     continue;
+     }
    /* Groups with zero repeats can of course be empty; skip them. */
-   if (c == OP_BRAZERO || c == OP_BRAMINZERO)
+   if (c == OP_BRAZERO || c == OP_BRAMINZERO || c == OP_SKIPZERO)
      {
      code += _pcre_OP_lengths[c];
      do code += GET(code, 1); while (*code == OP_ALT);
-Line 1399 
 for (code = first_significant_code(code
+Line 1770 
 for (code = first_significant_code(code
    /* For other groups, scan the branches. */
-   if (c == OP_BRA || c == OP_CBRA || c == OP_ONCE)
+   if (c == OP_BRA || c == OP_CBRA || c == OP_ONCE || c == OP_COND)
      {
      BOOL empty_branch;
      if (GET(code, 1) == 0) return TRUE;    /* Hit unclosed bracket */
-     /* Scan a closed bracket */
+     /* If a conditional group has only one branch, there is a second, implied,
+     empty branch, so just skip over the conditional, because it could be empty.
+     Otherwise, scan the individual branches of the group. */
-     empty_branch = FALSE;
+     if (c == OP_COND && code[GET(code, 1)] != OP_ALT)
-     do
-       {
-       if (!empty_branch && could_be_empty_branch(code, endcode, utf8))
-         empty_branch = TRUE;
        code += GET(code, 1);
+     else
+       {
+       empty_branch = FALSE;
+       do
+         {
+         if (!empty_branch && could_be_empty_branch(code, endcode, utf8))
+           empty_branch = TRUE;
+         code += GET(code, 1);
+         }
+       while (*code == OP_ALT);
+       if (!empty_branch) return FALSE;   /* All branches are non-empty */
        }
-     while (*code == OP_ALT);
-     if (!empty_branch) return FALSE;   /* All branches are non-empty */
      c = *code;
      continue;
      }
-Line 1423 
 for (code = first_significant_code(code
+Line 1802 
 for (code = first_significant_code(code
    switch (c)
      {
-     /* Check for quantifiers after a class */
+     /* Check for quantifiers after a class. XCLASS is used for classes that
+     cannot be represented just by a bit map. This includes negated single
+     high-valued characters. The length in _pcre_OP_lengths[] is zero; the
+     actual length is stored in the compiled code, so we must update "code"
+     here. */
  #ifdef SUPPORT_UTF8
      case OP_XCLASS:
-     ccode = code + GET(code, 1);
+     ccode = code += GET(code, 1);
      goto CHECK_CLASS_REPEAT;
  #endif
-Line 1471 
 for (code = first_significant_code(code
+Line 1854 
 for (code = first_significant_code(code
      case OP_NOT_WORDCHAR:
      case OP_WORDCHAR:
      case OP_ANY:
+     case OP_ALLANY:
      case OP_ANYBYTE:
      case OP_CHAR:
      case OP_CHARNC:
-Line 1489 
 for (code = first_significant_code(code
+Line 1873 
 for (code = first_significant_code(code
      case OP_TYPEEXACT:
      return FALSE;
+     /* These are going to continue, as they may be empty, but we have to
+     fudge the length for the \p and \P cases. */
+     case OP_TYPESTAR:
+     case OP_TYPEMINSTAR:
+     case OP_TYPEPOSSTAR:
+     case OP_TYPEQUERY:
+     case OP_TYPEMINQUERY:
+     case OP_TYPEPOSQUERY:
+     if (code[1] == OP_PROP || code[1] == OP_NOTPROP) code += 2;
+     break;
+     /* Same for these */
+     case OP_TYPEUPTO:
+     case OP_TYPEMINUPTO:
+     case OP_TYPEPOSUPTO:
+     if (code[3] == OP_PROP || code[3] == OP_NOTPROP) code += 2;
+     break;
      /* End of branch */
      case OP_KET:
-Line 1507 
 for (code = first_significant_code(code
+Line 1911 
 for (code = first_significant_code(code
      case OP_QUERY:
      case OP_MINQUERY:
      case OP_POSQUERY:
+     if (utf8 && code[1] >= 0xc0) code += _pcre_utf8_table4[code[1] & 0x3f];
+     break;
      case OP_UPTO:
      case OP_MINUPTO:
      case OP_POSUPTO:
-     if (utf8) while ((code[2] & 0xc0) == 0x80) code++;
+     if (utf8 && code[3] >= 0xc0) code += _pcre_utf8_table4[code[3] & 0x3f];
      break;
  #endif
      }
-Line 1558 
 return TRUE;
+Line 1965 
 return TRUE;
  *************************************************/
  /* This function is called when the sequence "[:" or "[." or "[=" is
- encountered in a character class. It checks whether this is followed by an
+ encountered in a character class. It checks whether this is followed by a
- optional ^ and then a sequence of letters, terminated by a matching ":]" or
+ sequence of characters terminated by a matching ":]" or ".]" or "=]". If we
- ".]" or "=]".
+ reach an unescaped ']' without the special preceding character, return FALSE.
+ Originally, this function only recognized a sequence of letters between the
+ terminators, but it seems that Perl recognizes any sequence of characters,
+ though of course unknown POSIX names are subsequently rejected. Perl gives an
+ "Unknown POSIX class" error for [:f\oo:] for example, where previously PCRE
+ didn't consider this to be a POSIX class. Likewise for [:1234:].
+ The problem in trying to be exactly like Perl is in the handling of escapes. We
+ have to be sure that [abc[:x\]pqr] is *not* treated as containing a POSIX
+ class, but [abc[:x\]pqr:]] is (so that an error can be generated). The code
+ below handles the special case of \], but does not try to do any other escape
+ processing. This makes it different from Perl for cases such as [:l\ower:]
+ where Perl recognizes it as the POSIX class "lower" but PCRE does not recognize
+ "l\ower". This is a lesser evil that not diagnosing bad classes when Perl does,
+ I think.
- Argument:
+ Arguments:
    ptr      pointer to the initial [
    endptr   where to return the end pointer
-   cd       pointer to compile data
  Returns:   TRUE or FALSE
  */
  static BOOL
- check_posix_syntax(const uschar *ptr, const uschar **endptr, compile_data *cd)
+ check_posix_syntax(const uschar *ptr, const uschar **endptr)
  {
  int terminator;          /* Don't combine these lines; the Solaris cc */
  terminator = *(++ptr);   /* compiler warns about "non-constant" initializer. */
- if (*(++ptr) == '^') ptr++;
+ for (++ptr; *ptr != 0; ptr++)
- while ((cd->ctypes[*ptr] & ctype_letter) != 0) ptr++;
- if (*ptr == terminator && ptr[1] == ']')
    {
-   *endptr = ptr;
+   if (*ptr == CHAR_BACKSLASH && ptr[1] == CHAR_RIGHT_SQUARE_BRACKET) ptr++; else
-   return TRUE;
+     {
+     if (*ptr == CHAR_RIGHT_SQUARE_BRACKET) return FALSE;
+     if (*ptr == terminator && ptr[1] == CHAR_RIGHT_SQUARE_BRACKET)
+       {
+       *endptr = ptr;
+       return TRUE;
+       }
+     }
    }
  return FALSE;
  }
-Line 1605 
 Returns:     a value representing the na
+Line 2031 
 Returns:     a value representing the na
  static int
  check_posix_name(const uschar *ptr, int len)
  {
+ const char *pn = posix_names;
  register int yield = 0;
  while (posix_name_lengths[yield] != 0)
    {
    if (len == posix_name_lengths[yield] &&
-     strncmp((const char *)ptr, posix_names[yield], len) == 0) return yield;
+     strncmp((const char *)ptr, pn, len) == 0) return yield;
+   pn += posix_name_lengths[yield] + 1;
    yield++;
    }
  return -1;
-Line 1624 
 return -1;
+Line 2052 
 return -1;
  that is referenced. This means that groups can be replicated for fixed
  repetition simply by copying (because the recursion is allowed to refer to
  earlier groups that are outside the current group). However, when a group is
- optional (i.e. the minimum quantifier is zero), OP_BRAZERO is inserted before
+ optional (i.e. the minimum quantifier is zero), OP_BRAZERO or OP_SKIPZERO is
- it, after it has been compiled. This means that any OP_RECURSE items within it
+ inserted before it, after it has been compiled. This means that any OP_RECURSE
- that refer to the group itself or any contained groups have to have their
+ items within it that refer to the group itself or any contained groups have to
- offsets adjusted. That one of the jobs of this function. Before it is called,
+ have their offsets adjusted. That one of the jobs of this function. Before it
- the partially compiled regex must be temporarily terminated with OP_END.
+ is called, the partially compiled regex must be temporarily terminated with
+ OP_END.
  This function has been extended with the possibility of forward references for
  recursions and subroutine calls. It must also check the list of such references
-Line 1651 
 adjust_recurse(uschar *group, int adjust
+Line 2080 
 adjust_recurse(uschar *group, int adjust
    uschar *save_hwm)
  {
  uschar *ptr = group;
  while ((ptr = (uschar *)find_recurse(ptr, utf8)) != NULL)
    {
    int offset;
-Line 1762 
 get_othercase_range(unsigned int *cptr,
+Line 2192 
 get_othercase_range(unsigned int *cptr,
  unsigned int c, othercase, next;
  for (c = *cptr; c <= d; c++)
-   { if ((othercase = _pcre_ucp_othercase(c)) != NOTACHAR) break; }
+   { if ((othercase = UCD_OTHERCASE(c)) != c) break; }
  if (c > d) return FALSE;
-Line 1771 
 next = othercase + 1;
+Line 2201 
 next = othercase + 1;
  for (++c; c <= d; c++)
    {
-   if (_pcre_ucp_othercase(c) != next) break;
+   if (UCD_OTHERCASE(c) != next) break;
    next++;
    }
-Line 1817 
 if ((options & PCRE_EXTENDED) != 0)
+Line 2247 
 if ((options & PCRE_EXTENDED) != 0)
    for (;;)
      {
      while ((cd->ctypes[*ptr] & ctype_space) != 0) ptr++;
-     if (*ptr == '#')
+     if (*ptr == CHAR_NUMBER_SIGN)
        {
        while (*(++ptr) != 0)
          if (IS_NEWLINE(ptr)) { ptr += cd->nllen; break; }
-Line 1829 
 if ((options & PCRE_EXTENDED) != 0)
+Line 2259 
 if ((options & PCRE_EXTENDED) != 0)
  /* If the next item is one that we can handle, get its value. A non-negative
  value is a character, a negative value is an escape value. */
- if (*ptr == '\\')
+ if (*ptr == CHAR_BACKSLASH)
    {
    int temperrorcode = 0;
    next = check_escape(&ptr, &temperrorcode, cd->bracount, options, FALSE);
-Line 1854 
 if ((options & PCRE_EXTENDED) != 0)
+Line 2284 
 if ((options & PCRE_EXTENDED) != 0)
    for (;;)
      {
      while ((cd->ctypes[*ptr] & ctype_space) != 0) ptr++;
-     if (*ptr == '#')
+     if (*ptr == CHAR_NUMBER_SIGN)
        {
        while (*(++ptr) != 0)
          if (IS_NEWLINE(ptr)) { ptr += cd->nllen; break; }
-Line 1865 
 if ((options & PCRE_EXTENDED) != 0)
+Line 2295 
 if ((options & PCRE_EXTENDED) != 0)
  /* If the next thing is itself optional, we have to give up. */
- if (*ptr == '*' || *ptr == '?' || strncmp((char *)ptr, "{0,", 3) == 0)
+ if (*ptr == CHAR_ASTERISK || *ptr == CHAR_QUESTION_MARK ||
-   return FALSE;
+   strncmp((char *)ptr, STR_LEFT_CURLY_BRACKET STR_0 STR_COMMA, 3) == 0)
+     return FALSE;
  /* Now compare the next item with the previous opcode. If the previous is a
  positive single character match, "item" either contains the character or, if
-Line 1881 
 if (next >= 0) switch(op_code)
+Line 2312 
 if (next >= 0) switch(op_code)
    case OP_CHAR:
  #ifdef SUPPORT_UTF8
    if (utf8 && item > 127) { GETCHAR(item, utf8_char); }
+ #else
+   (void)(utf8_char);  /* Keep compiler happy by referencing function argument */
  #endif
    return item != next;
-Line 1899 
 if (next >= 0) switch(op_code)
+Line 2332 
 if (next >= 0) switch(op_code)
      unsigned int othercase;
      if (next < 128) othercase = cd->fcc[next]; else
  #ifdef SUPPORT_UCP
-     othercase = _pcre_ucp_othercase((unsigned int)next);
+     othercase = UCD_OTHERCASE((unsigned int)next);
  #else
      othercase = NOTACHAR;
  #endif
-Line 1912 
 if (next >= 0) switch(op_code)
+Line 2345 
 if (next >= 0) switch(op_code)
    /* For OP_NOT, "item" must be a single-byte character. */
    case OP_NOT:
-   if (next < 0) return FALSE;  /* Not a character */
    if (item == next) return TRUE;
    if ((options & PCRE_CASELESS) == 0) return FALSE;
  #ifdef SUPPORT_UTF8
-Line 1921 
 if (next >= 0) switch(op_code)
+Line 2353 
 if (next >= 0) switch(op_code)
      unsigned int othercase;
      if (next < 128) othercase = cd->fcc[next]; else
  #ifdef SUPPORT_UCP
-     othercase = _pcre_ucp_othercase(next);
+     othercase = UCD_OTHERCASE(next);
  #else
      othercase = NOTACHAR;
  #endif
-Line 1949 
 if (next >= 0) switch(op_code)
+Line 2381 
 if (next >= 0) switch(op_code)
    case OP_NOT_WORDCHAR:
    return next <= 127 && (cd->ctypes[next] & ctype_word) != 0;
+   case OP_HSPACE:
+   case OP_NOT_HSPACE:
+   switch(next)
+     {
+     case 0x09:
+     case 0x20:
+     case 0xa0:
+     case 0x1680:
+     case 0x180e:
+     case 0x2000:
+     case 0x2001:
+     case 0x2002:
+     case 0x2003:
+     case 0x2004:
+     case 0x2005:
+     case 0x2006:
+     case 0x2007:
+     case 0x2008:
+     case 0x2009:
+     case 0x200A:
+     case 0x202f:
+     case 0x205f:
+     case 0x3000:
+     return op_code != OP_HSPACE;
+     default:
+     return op_code == OP_HSPACE;
+     }
+   case OP_VSPACE:
+   case OP_NOT_VSPACE:
+   switch(next)
+     {
+     case 0x0a:
+     case 0x0b:
+     case 0x0c:
+     case 0x0d:
+     case 0x85:
+     case 0x2028:
+     case 0x2029:
+     return op_code != OP_VSPACE;
+     default:
+     return op_code == OP_VSPACE;
+     }
    default:
    return FALSE;
    }
-Line 1983 
 switch(op_code)
+Line 2459 
 switch(op_code)
      case ESC_W:
      return item <= 127 && (cd->ctypes[item] & ctype_word) != 0;
+     case ESC_h:
+     case ESC_H:
+     switch(item)
+       {
+       case 0x09:
+       case 0x20:
+       case 0xa0:
+       case 0x1680:
+       case 0x180e:
+       case 0x2000:
+       case 0x2001:
+       case 0x2002:
+       case 0x2003:
+       case 0x2004:
+       case 0x2005:
+       case 0x2006:
+       case 0x2007:
+       case 0x2008:
+       case 0x2009:
+       case 0x200A:
+       case 0x202f:
+       case 0x205f:
+       case 0x3000:
+       return -next != ESC_h;
+       default:
+       return -next == ESC_h;
+       }
+     case ESC_v:
+     case ESC_V:
+     switch(item)
+       {
+       case 0x0a:
+       case 0x0b:
+       case 0x0c:
+       case 0x0d:
+       case 0x85:
+       case 0x2028:
+       case 0x2029:
+       return -next != ESC_v;
+       default:
+       return -next == ESC_v;
+       }
      default:
      return FALSE;
      }
    case OP_DIGIT:
-   return next == -ESC_D || next == -ESC_s || next == -ESC_W;
+   return next == -ESC_D || next == -ESC_s || next == -ESC_W ||
+          next == -ESC_h || next == -ESC_v;
    case OP_NOT_DIGIT:
    return next == -ESC_d;
-Line 1997 
 switch(op_code)
+Line 2518 
 switch(op_code)
    return next == -ESC_S || next == -ESC_d || next == -ESC_w;
    case OP_NOT_WHITESPACE:
-   return next == -ESC_s;
+   return next == -ESC_s || next == -ESC_h || next == -ESC_v;
+   case OP_HSPACE:
+   return next == -ESC_S || next == -ESC_H || next == -ESC_d || next == -ESC_w;
+   case OP_NOT_HSPACE:
+   return next == -ESC_h;
+   /* Can't have \S in here because VT matches \S (Perl anomaly) */
+   case OP_VSPACE:
+   return next == -ESC_V || next == -ESC_d || next == -ESC_w;
+   case OP_NOT_VSPACE:
+   return next == -ESC_v;
    case OP_WORDCHAR:
-   return next == -ESC_W || next == -ESC_s;
+   return next == -ESC_W || next == -ESC_s || next == -ESC_h || next == -ESC_v;
    case OP_NOT_WORDCHAR:
    return next == -ESC_w || next == -ESC_d;
-Line 2073 
 uschar classbits[32];
+Line 2607 
 uschar classbits[32];
  BOOL class_utf8;
  BOOL utf8 = (options & PCRE_UTF8) != 0;
  uschar *class_utf8data;
+ uschar *class_utf8data_base;
  uschar utf8_char[6];
  #else
  BOOL utf8 = FALSE;
-Line 2112 
 req_caseopt = ((options & PCRE_CASELESS)
+Line 2647 
 req_caseopt = ((options & PCRE_CASELESS)
  for (;; ptr++)
    {
    BOOL negate_class;
+   BOOL should_flip_negation;
    BOOL possessive_quantifier;
    BOOL is_quantifier;
    BOOL is_recurse;
    BOOL reset_bracount;
    int class_charcount;
    int class_lastchar;
    int newoptions;
-Line 2153 
 for (;; ptr++)
+Line 2689 
 for (;; ptr++)
      */
      if (code < last_code) code = last_code;
+     /* Paranoid check for integer overflow */
+     if (OFLOW_MAX - *lengthptr < code - last_code)
+       {
+       *errorcodeptr = ERR20;
+       goto FAILED;
+       }
      *lengthptr += code - last_code;
      DPRINTF(("length=%d added %d c=%c\n", *lengthptr, code - last_code, c));
-Line 2190 
 for (;; ptr++)
+Line 2735 
 for (;; ptr++)
    if (inescq && c != 0)
      {
-     if (c == '\\' && ptr[1] == 'E')
+     if (c == CHAR_BACKSLASH && ptr[1] == CHAR_E)
        {
        inescq = FALSE;
        ptr++;
-Line 2216 
 for (;; ptr++)
+Line 2761 
 for (;; ptr++)
    /* Fill in length of a previous callout, except when the next thing is
    a quantifier. */
-   is_quantifier = c == '*' || c == '+' || c == '?' ||
+   is_quantifier =
-     (c == '{' && is_counted_repeat(ptr+1));
+     c == CHAR_ASTERISK || c == CHAR_PLUS || c == CHAR_QUESTION_MARK ||
+     (c == CHAR_LEFT_CURLY_BRACKET && is_counted_repeat(ptr+1));
    if (!is_quantifier && previous_callout != NULL &&
         after_manual_callout-- <= 0)
-Line 2232 
 for (;; ptr++)
+Line 2778 
 for (;; ptr++)
    if ((options & PCRE_EXTENDED) != 0)
      {
      if ((cd->ctypes[c] & ctype_space) != 0) continue;
-     if (c == '#')
+     if (c == CHAR_NUMBER_SIGN)
        {
        while (*(++ptr) != 0)
          {
-Line 2257 
 for (;; ptr++)
+Line 2803 
 for (;; ptr++)
      {
      /* ===================================================================*/
      case 0:                        /* The branch terminates at string end */
-     case '|':                      /* or | or ) */
+     case CHAR_VERTICAL_LINE:       /* or | or ) */
-     case ')':
+     case CHAR_RIGHT_PARENTHESIS:
      *firstbyteptr = firstbyte;
      *reqbyteptr = reqbyte;
      *codeptr = code;
      *ptrptr = ptr;
      if (lengthptr != NULL)
        {
+       if (OFLOW_MAX - *lengthptr < code - last_code)
+         {
+         *errorcodeptr = ERR20;
+         goto FAILED;
+         }
        *lengthptr += code - last_code;   /* To include callout length */
        DPRINTF((">> end branch\n"));
        }
-Line 2275 
 for (;; ptr++)
+Line 2826 
 for (;; ptr++)
      /* Handle single-character metacharacters. In multiline mode, ^ disables
      the setting of any following char as a first character. */
-     case '^':
+     case CHAR_CIRCUMFLEX_ACCENT:
      if ((options & PCRE_MULTILINE) != 0)
        {
        if (firstbyte == REQ_UNSET) firstbyte = REQ_NONE;
-Line 2284 
 for (;; ptr++)
+Line 2835 
 for (;; ptr++)
      *code++ = OP_CIRC;
      break;
-     case '$':
+     case CHAR_DOLLAR_SIGN:
      previous = NULL;
      *code++ = OP_DOLL;
      break;
-Line 2292 
 for (;; ptr++)
+Line 2843 
 for (;; ptr++)
      /* There can never be a first char if '.' is first, whatever happens about
      repeats. The value of reqbyte doesn't change either. */
-     case '.':
+     case CHAR_DOT:
      if (firstbyte == REQ_UNSET) firstbyte = REQ_NONE;
      zerofirstbyte = firstbyte;
      zeroreqbyte = reqbyte;
      previous = code;
-     *code++ = OP_ANY;
+     *code++ = ((options & PCRE_DOTALL) != 0)? OP_ALLANY: OP_ANY;
      break;
-Line 2312 
 for (;; ptr++)
+Line 2863 
 for (;; ptr++)
      opcode is compiled. It may optionally have a bit map for characters < 256,
      but those above are are explicitly listed afterwards. A flag byte tells
      whether the bitmap is present, and whether this is a negated class or not.
-     */
-     case '[':
+     In JavaScript compatibility mode, an isolated ']' causes an error. In
+     default (Perl) mode, it is treated as a data character. */
+     case CHAR_RIGHT_SQUARE_BRACKET:
+     if ((cd->external_options & PCRE_JAVASCRIPT_COMPAT) != 0)
+       {
+       *errorcodeptr = ERR64;
+       goto FAILED;
+       }
+     goto NORMAL_CHAR;
+     case CHAR_LEFT_SQUARE_BRACKET:
      previous = code;
      /* PCRE supports POSIX class stuff inside a class. Perl gives an error if
      they are encountered at the top level, so we'll do that too. */
-     if ((ptr[1] == ':' || ptr[1] == '.' || ptr[1] == '=') &&
+     if ((ptr[1] == CHAR_COLON || ptr[1] == CHAR_DOT ||
-         check_posix_syntax(ptr, &tempptr, cd))
+          ptr[1] == CHAR_EQUALS_SIGN) &&
+         check_posix_syntax(ptr, &tempptr))
        {
-       *errorcodeptr = (ptr[1] == ':')? ERR13 : ERR31;
+       *errorcodeptr = (ptr[1] == CHAR_COLON)? ERR13 : ERR31;
        goto FAILED;
        }
-     /* If the first character is '^', set the negation flag and skip it. */
+     /* If the first character is '^', set the negation flag and skip it. Also,
+     if the first few characters (either before or after ^) are \Q\E or \E we
+     skip them too. This makes for compatibility with Perl. */
-     if ((c = *(++ptr)) == '^')
+     negate_class = FALSE;
+     for (;;)
        {
-       negate_class = TRUE;
        c = *(++ptr);
+       if (c == CHAR_BACKSLASH)
+         {
+         if (ptr[1] == CHAR_E)
+           ptr++;
+         else if (strncmp((const char *)ptr+1,
+                           STR_Q STR_BACKSLASH STR_E, 3) == 0)
+           ptr += 3;
+         else
+           break;
+         }
+       else if (!negate_class && c == CHAR_CIRCUMFLEX_ACCENT)
+         negate_class = TRUE;
+       else break;
        }
-     else
+     /* Empty classes are allowed in JavaScript compatibility mode. Otherwise,
+     an initial ']' is taken as a data character -- the code below handles
+     that. In JS mode, [] must always fail, so generate OP_FAIL, whereas
+     [^] must match any character, so generate OP_ALLANY. */
+     if (c == CHAR_RIGHT_SQUARE_BRACKET &&
+         (cd->external_options & PCRE_JAVASCRIPT_COMPAT) != 0)
        {
-       negate_class = FALSE;
+       *code++ = negate_class? OP_ALLANY : OP_FAIL;
+       if (firstbyte == REQ_UNSET) firstbyte = REQ_NONE;
+       zerofirstbyte = firstbyte;
+       break;
        }
+     /* If a class contains a negative special such as \S, we need to flip the
+     negation flag at the end, so that support for characters > 255 works
+     correctly (they are all included in the class). */
+     should_flip_negation = FALSE;
      /* Keep a count of chars with values < 256 so that we can optimize the case
      of just a single character (as long as it's < 256). However, For higher
      valued UTF-8 characters, we don't yet do any optimization. */
-Line 2356 
 for (;; ptr++)
+Line 2949 
 for (;; ptr++)
  #ifdef SUPPORT_UTF8
      class_utf8 = FALSE;                       /* No chars >= 256 */
      class_utf8data = code + LINK_SIZE + 2;    /* For UTF-8 items */
+     class_utf8data_base = class_utf8data;     /* For resetting in pass 1 */
  #endif
      /* Process characters until ] is reached. By writing this as a "do" it
-Line 2371 
 for (;; ptr++)
+Line 2965 
 for (;; ptr++)
          {                           /* Braces are required because the */
          GETCHARLEN(c, ptr, ptr);    /* macro generates multiple statements */
          }
+       /* In the pre-compile phase, accumulate the length of any UTF-8 extra
+       data and reset the pointer. This is so that very large classes that
+       contain a zillion UTF-8 characters no longer overwrite the work space
+       (which is on the stack). */
+       if (lengthptr != NULL)
+         {
+         *lengthptr += class_utf8data - class_utf8data_base;
+         class_utf8data = class_utf8data_base;
+         }
  #endif
        /* Inside \Q...\E everything is literal except \E */
        if (inescq)
          {
-         if (c == '\\' && ptr[1] == 'E')     /* If we are at \E */
+         if (c == CHAR_BACKSLASH && ptr[1] == CHAR_E)  /* If we are at \E */
            {
            inescq = FALSE;                   /* Reset literal state */
            ptr++;                            /* Skip the 'E' */
-Line 2392 
 for (;; ptr++)
+Line 2998 
 for (;; ptr++)
        [.ch.] and [=ch=] ("collating elements") and fault them, as Perl
 .6 and 5.8 do. */
-       if (c == '[' &&
+       if (c == CHAR_LEFT_SQUARE_BRACKET &&
-           (ptr[1] == ':' || ptr[1] == '.' || ptr[1] == '=') &&
+           (ptr[1] == CHAR_COLON || ptr[1] == CHAR_DOT ||
-           check_posix_syntax(ptr, &tempptr, cd))
+            ptr[1] == CHAR_EQUALS_SIGN) && check_posix_syntax(ptr, &tempptr))
          {
          BOOL local_negate = FALSE;
          int posix_class, taboffset, tabopt;
          register const uschar *cbits = cd->cbits;
          uschar pbits[32];
-         if (ptr[1] != ':')
+         if (ptr[1] != CHAR_COLON)
            {
            *errorcodeptr = ERR31;
            goto FAILED;
            }
          ptr += 2;
-         if (*ptr == '^')
+         if (*ptr == CHAR_CIRCUMFLEX_ACCENT)
            {
            local_negate = TRUE;
+           should_flip_negation = TRUE;  /* Note negative special */
            ptr++;
            }
-Line 2477 
 for (;; ptr++)
+Line 3084 
 for (;; ptr++)
        of the specials, which just set a flag. The sequence \b is a special
        case. Inside a class (and only there) it is treated as backspace.
        Elsewhere it marks a word boundary. Other escapes have preset maps ready
-       to or into the one we are building. We assume they have more than one
+       to 'or' into the one we are building. We assume they have more than one
        character in them, so set class_charcount bigger than one. */
-       if (c == '\\')
+       if (c == CHAR_BACKSLASH)
          {
          c = check_escape(&ptr, errorcodeptr, cd->bracount, options, TRUE);
          if (*errorcodeptr != 0) goto FAILED;
-         if (-c == ESC_b) c = '\b';       /* \b is backslash in a class */
+         if (-c == ESC_b) c = CHAR_BS;       /* \b is backspace in a class */
-         else if (-c == ESC_X) c = 'X';   /* \X is literal X in a class */
+         else if (-c == ESC_X) c = CHAR_X;   /* \X is literal X in a class */
-         else if (-c == ESC_R) c = 'R';   /* \R is literal R in a class */
+         else if (-c == ESC_R) c = CHAR_R;   /* \R is literal R in a class */
          else if (-c == ESC_Q)            /* Handle start of quoted string */
            {
-           if (ptr[1] == '\\' && ptr[2] == 'E')
+           if (ptr[1] == CHAR_BACKSLASH && ptr[2] == CHAR_E)
              {
              ptr += 2; /* avoid empty string */
              }
            else inescq = TRUE;
            continue;
            }
+         else if (-c == ESC_E) continue;  /* Ignore orphan \E */
          if (c < 0)
            {
-Line 2512 
 for (;; ptr++)
+Line 3120 
 for (;; ptr++)
              continue;
              case ESC_D:
+             should_flip_negation = TRUE;
              for (c = 0; c < 32; c++) classbits[c] |= ~cbits[c+cbit_digit];
              continue;
-Line 2520 
 for (;; ptr++)
+Line 3129 
 for (;; ptr++)
              continue;
              case ESC_W:
+             should_flip_negation = TRUE;
              for (c = 0; c < 32; c++) classbits[c] |= ~cbits[c+cbit_word];
              continue;
-Line 2529 
 for (;; ptr++)
+Line 3139 
 for (;; ptr++)
              continue;
              case ESC_S:
+             should_flip_negation = TRUE;
              for (c = 0; c < 32; c++) classbits[c] |= ~cbits[c+cbit_space];
              classbits[1] |= 0x08;    /* Perl 5.004 onwards omits VT from \s */
              continue;
-             case ESC_E: /* Perl ignores an orphan \E */
-             continue;
              default:    /* Not recognized; fall through */
              break;      /* Need "default" setting to stop compiler warning. */
              }
-Line 2544 
 for (;; ptr++)
+Line 3152 
 for (;; ptr++)
            else if (c == -ESC_d || c == -ESC_D || c == -ESC_w ||
                     c == -ESC_W || c == -ESC_s || c == -ESC_S) continue;
            /* We need to deal with \H, \h, \V, and \v in both phases because
            they use extra memory. */
            if (-c == ESC_h)
              {
              SETBIT(classbits, 0x09); /* VT */
              SETBIT(classbits, 0x20); /* SPACE */
              SETBIT(classbits, 0xa0); /* NSBP */
  #ifdef SUPPORT_UTF8
              if (utf8)
                {
                class_utf8 = TRUE;
                *class_utf8data++ = XCL_SINGLE;
                class_utf8data += _pcre_ord2utf8(0x1680, class_utf8data);
                *class_utf8data++ = XCL_SINGLE;
                class_utf8data += _pcre_ord2utf8(0x180e, class_utf8data);
                *class_utf8data++ = XCL_RANGE;
                class_utf8data += _pcre_ord2utf8(0x2000, class_utf8data);
                class_utf8data += _pcre_ord2utf8(0x200A, class_utf8data);
                *class_utf8data++ = XCL_SINGLE;
                class_utf8data += _pcre_ord2utf8(0x202f, class_utf8data);
                *class_utf8data++ = XCL_SINGLE;
                class_utf8data += _pcre_ord2utf8(0x205f, class_utf8data);
                *class_utf8data++ = XCL_SINGLE;
                class_utf8data += _pcre_ord2utf8(0x3000, class_utf8data);
                }
  #endif
              continue;
              }
            if (-c == ESC_H)
              {
-Line 2581 
 for (;; ptr++)
+Line 3189 
 for (;; ptr++)
                {
                int x = 0xff;
                switch (c)
                  {
                  case 0x09/8: x ^= 1 << (0x09%8); break;
                  case 0x20/8: x ^= 1 << (0x20%8); break;
                  case 0xa0/8: x ^= 1 << (0xa0%8); break;
                  default: break;
                  }
                classbits[c] |= x;
                }
  #ifdef SUPPORT_UTF8
              if (utf8)
                {
                class_utf8 = TRUE;
                *class_utf8data++ = XCL_RANGE;
                class_utf8data += _pcre_ord2utf8(0x0100, class_utf8data);
                class_utf8data += _pcre_ord2utf8(0x167f, class_utf8data);
                *class_utf8data++ = XCL_RANGE;
                class_utf8data += _pcre_ord2utf8(0x1681, class_utf8data);
                class_utf8data += _pcre_ord2utf8(0x180d, class_utf8data);
                *class_utf8data++ = XCL_RANGE;
                class_utf8data += _pcre_ord2utf8(0x180f, class_utf8data);
                class_utf8data += _pcre_ord2utf8(0x1fff, class_utf8data);
                *class_utf8data++ = XCL_RANGE;
                class_utf8data += _pcre_ord2utf8(0x200B, class_utf8data);
                class_utf8data += _pcre_ord2utf8(0x202e, class_utf8data);
                *class_utf8data++ = XCL_RANGE;
                class_utf8data += _pcre_ord2utf8(0x2030, class_utf8data);
                class_utf8data += _pcre_ord2utf8(0x205e, class_utf8data);
                *class_utf8data++ = XCL_RANGE;
                class_utf8data += _pcre_ord2utf8(0x2060, class_utf8data);
                class_utf8data += _pcre_ord2utf8(0x2fff, class_utf8data);
                *class_utf8data++ = XCL_RANGE;
                class_utf8data += _pcre_ord2utf8(0x3001, class_utf8data);
                class_utf8data += _pcre_ord2utf8(0x7fffffff, class_utf8data);
                }
  #endif
              continue;
              }
            if (-c == ESC_v)
              {
              SETBIT(classbits, 0x0a); /* LF */
              SETBIT(classbits, 0x0b); /* VT */
              SETBIT(classbits, 0x0c); /* FF */
              SETBIT(classbits, 0x0d); /* CR */
              SETBIT(classbits, 0x85); /* NEL */
  #ifdef SUPPORT_UTF8
              if (utf8)
                {
                class_utf8 = TRUE;
                *class_utf8data++ = XCL_RANGE;
                class_utf8data += _pcre_ord2utf8(0x2028, class_utf8data);
                class_utf8data += _pcre_ord2utf8(0x2029, class_utf8data);
                }
  #endif
              continue;
              }
            if (-c == ESC_V)
              {
-Line 2645 
 for (;; ptr++)
+Line 3253 
 for (;; ptr++)
                {
                int x = 0xff;
                switch (c)
                  {
                  case 0x0a/8: x ^= 1 << (0x0a%8);
                               x ^= 1 << (0x0b%8);
                               x ^= 1 << (0x0c%8);
                               x ^= 1 << (0x0d%8);
                               break;
                  case 0x85/8: x ^= 1 << (0x85%8); break;
                  default: break;
                  }
                classbits[c] |= x;
                }
  #ifdef SUPPORT_UTF8
              if (utf8)
                {
                class_utf8 = TRUE;
                *class_utf8data++ = XCL_RANGE;
                class_utf8data += _pcre_ord2utf8(0x0100, class_utf8data);
                class_utf8data += _pcre_ord2utf8(0x2027, class_utf8data);
                *class_utf8data++ = XCL_RANGE;
                class_utf8data += _pcre_ord2utf8(0x2029, class_utf8data);
                class_utf8data += _pcre_ord2utf8(0x7fffffff, class_utf8data);
                }
  #endif
              continue;
              }
            /* We need to deal with \P and \p in both phases. */
-Line 2715 
 for (;; ptr++)
+Line 3323 
 for (;; ptr++)
        entirely. The code for handling \Q and \E is messy. */
        CHECK_RANGE:
-       while (ptr[1] == '\\' && ptr[2] == 'E')
+       while (ptr[1] == CHAR_BACKSLASH && ptr[2] == CHAR_E)
          {
          inescq = FALSE;
          ptr += 2;
-Line 2723 
 for (;; ptr++)
+Line 3331 
 for (;; ptr++)
        oldptr = ptr;
-       if (!inescq && ptr[1] == '-')
+       /* Remember \r or \n */
+       if (c == CHAR_CR || c == CHAR_NL) cd->external_flags |= PCRE_HASCRORLF;
+       /* Check for range */
+       if (!inescq && ptr[1] == CHAR_MINUS)
          {
          int d;
          ptr += 2;
-         while (*ptr == '\\' && ptr[1] == 'E') ptr += 2;
+         while (*ptr == CHAR_BACKSLASH && ptr[1] == CHAR_E) ptr += 2;
          /* If we hit \Q (not followed by \E) at this point, go into escaped
          mode. */
-         while (*ptr == '\\' && ptr[1] == 'Q')
+         while (*ptr == CHAR_BACKSLASH && ptr[1] == CHAR_Q)
            {
            ptr += 2;
-           if (*ptr == '\\' && ptr[1] == 'E') { ptr += 2; continue; }
+           if (*ptr == CHAR_BACKSLASH && ptr[1] == CHAR_E)
+             { ptr += 2; continue; }
            inescq = TRUE;
            break;
            }
-         if (*ptr == 0 || (!inescq && *ptr == ']'))
+         if (*ptr == 0 || (!inescq && *ptr == CHAR_RIGHT_SQUARE_BRACKET))
            {
            ptr = oldptr;
            goto LONE_SINGLE_CHARACTER;
-Line 2759 
 for (;; ptr++)
+Line 3374 
 for (;; ptr++)
          not any of the other escapes. Perl 5.6 treats a hyphen as a literal
          in such circumstances. */
-         if (!inescq && d == '\\')
+         if (!inescq && d == CHAR_BACKSLASH)
            {
            d = check_escape(&ptr, errorcodeptr, cd->bracount, options, TRUE);
            if (*errorcodeptr != 0) goto FAILED;
-           /* \b is backslash; \X is literal X; \R is literal R; any other
+           /* \b is backspace; \X is literal X; \R is literal R; any other
            special means the '-' was literal */
            if (d < 0)
              {
-             if (d == -ESC_b) d = '\b';
+             if (d == -ESC_b) d = CHAR_BS;
-             else if (d == -ESC_X) d = 'X';
+             else if (d == -ESC_X) d = CHAR_X;
-             else if (d == -ESC_R) d = 'R'; else
+             else if (d == -ESC_R) d = CHAR_R; else
                {
                ptr = oldptr;
                goto LONE_SINGLE_CHARACTER;  /* A few lines below */
-Line 2790 
 for (;; ptr++)
+Line 3405 
 for (;; ptr++)
          if (d == c) goto LONE_SINGLE_CHARACTER;  /* A few lines below */
+         /* Remember \r or \n */
+         if (d == CHAR_CR || d == CHAR_NL) cd->external_flags |= PCRE_HASCRORLF;
          /* In UTF-8 mode, if the upper limit is > 255, or > 127 for caseless
          matching, we have to use an XCLASS with extra data items. Caseless
          matching for characters > 127 is available only if UCP support is
-Line 2812 
 for (;; ptr++)
+Line 3431 
 for (;; ptr++)
              unsigned int origd = d;
              while (get_othercase_range(&cc, origd, &occ, &ocd))
                {
                if (occ >= (unsigned int)c &&
                    ocd <= (unsigned int)d)
                  continue;                          /* Skip embedded ranges */
                if (occ < (unsigned int)c  &&
                    ocd >= (unsigned int)c - 1)      /* Extend the basic range */
                  {                                  /* if there is overlap,   */
                  c = occ;                           /* noting that if occ < c */
                  continue;                          /* we can't have ocd > d  */
                  }                                  /* because a subrange is  */
                if (ocd > (unsigned int)d &&
                    occ <= (unsigned int)d + 1)      /* always shorter than    */
                  {                                  /* the basic range.       */
                  d = ocd;
-Line 2908 
 for (;; ptr++)
+Line 3527 
 for (;; ptr++)
          if ((options & PCRE_CASELESS) != 0)
            {
            unsigned int othercase;
-           if ((othercase = _pcre_ucp_othercase(c)) != NOTACHAR)
+           if ((othercase = UCD_OTHERCASE(c)) != c)
              {
              *class_utf8data++ = XCL_SINGLE;
              class_utf8data += _pcre_ord2utf8(othercase, class_utf8data);
-Line 2935 
 for (;; ptr++)
+Line 3554 
 for (;; ptr++)
      /* Loop until ']' reached. This "while" is the end of the "do" above. */
-     while ((c = *(++ptr)) != 0 && (c != ']' || inescq));
+     while ((c = *(++ptr)) != 0 && (c != CHAR_RIGHT_SQUARE_BRACKET || inescq));
      if (c == 0)                          /* Missing terminating ']' */
        {
-Line 2943 
 for (;; ptr++)
+Line 3562 
 for (;; ptr++)
        goto FAILED;
        }
+ /* This code has been disabled because it would mean that \s counts as
+ an explicit \r or \n reference, and that's not really what is wanted. Now
+ we set the flag only if there is a literal "\r" or "\n" in the class. */
+ #if 0
+     /* Remember whether \r or \n are in this class */
+     if (negate_class)
+       {
+       if ((classbits[1] & 0x24) != 0x24) cd->external_flags |= PCRE_HASCRORLF;
+       }
+     else
+       {
+       if ((classbits[1] & 0x24) != 0) cd->external_flags |= PCRE_HASCRORLF;
+       }
+ #endif
      /* If class_charcount is 1, we saw precisely one character whose value is
-     less than 256. In non-UTF-8 mode we can always optimize. In UTF-8 mode, we
+     less than 256. As long as there were no characters >= 128 and there was no
-     can optimize the negative case only if there were no characters >= 128
+     use of \p or \P, in other words, no use of any XCLASS features, we can
-     because OP_NOT and the related opcodes like OP_NOTSTAR operate on
+     optimize.
-     single-bytes only. This is an historical hangover. Maybe one day we can
-     tidy these opcodes to handle multi-byte characters.
+     In UTF-8 mode, we can optimize the negative case only if there were no
+     characters >= 128 because OP_NOT and the related opcodes like OP_NOTSTAR
+     operate on single-bytes only. This is an historical hangover. Maybe one day
+     we can tidy these opcodes to handle multi-byte characters.
      The optimization throws away the bit map. We turn the item into a
 -character OP_CHAR[NC] if it's positive, or OP_NOT if it's negative. Note
-Line 2958 
 for (;; ptr++)
+Line 3599 
 for (;; ptr++)
      reqbyte, save the previous value for reinstating. */
  #ifdef SUPPORT_UTF8
-     if (class_charcount == 1 &&
+     if (class_charcount == 1 && !class_utf8 &&
-           (!utf8 ||
+       (!utf8 || !negate_class || class_lastchar < 128))
-           (!class_utf8 && (!negate_class || class_lastchar < 128))))
  #else
      if (class_charcount == 1)
  #endif
-Line 3004 
 for (;; ptr++)
+Line 3643 
 for (;; ptr++)
      zeroreqbyte = reqbyte;
      /* If there are characters with values > 255, we have to compile an
-     extended class, with its own opcode. If there are no characters < 256,
+     extended class, with its own opcode, unless there was a negated special
-     we can omit the bitmap in the actual compiled code. */
+     such as \S in the class, because in that case all characters > 255 are in
+     the class, so any that were explicitly given as well can be ignored. If
+     (when there are explicit characters > 255 that must be listed) there are no
+     characters < 256, we can omit the bitmap in the actual compiled code. */
  #ifdef SUPPORT_UTF8
-     if (class_utf8)
+     if (class_utf8 && !should_flip_negation)
        {
        *class_utf8data++ = XCL_END;    /* Marks the end of extra data */
        *code++ = OP_XCLASS;
-Line 3034 
 for (;; ptr++)
+Line 3676 
 for (;; ptr++)
        }
  #endif
-     /* If there are no characters > 255, negate the 32-byte map if necessary,
+     /* If there are no characters > 255, set the opcode to OP_CLASS or
-     and copy it into the code vector. If this is the first thing in the branch,
+     OP_NCLASS, depending on whether the whole class was negated and whether
-     there can be no first char setting, whatever the repeat count. Any reqbyte
+     there were negative specials such as \S in the class. Then copy the 32-byte
-     setting must remain unchanged after any kind of repeat. */
+     map into the code vector, negating it if necessary. */
+     *code++ = (negate_class == should_flip_negation) ? OP_CLASS : OP_NCLASS;
      if (negate_class)
        {
-       *code++ = OP_NCLASS;
        if (lengthptr == NULL)    /* Save time in the pre-compile phase */
          for (c = 0; c < 32; c++) code[c] = ~classbits[c];
        }
      else
        {
-       *code++ = OP_CLASS;
        memcpy(code, classbits, 32);
        }
      code += 32;
-Line 3058 
 for (;; ptr++)
+Line 3699 
 for (;; ptr++)
      /* Various kinds of repeat; '{' is not necessarily a quantifier, but this
      has been tested above. */
-     case '{':
+     case CHAR_LEFT_CURLY_BRACKET:
      if (!is_quantifier) goto NORMAL_CHAR;
      ptr = read_repeat_counts(ptr+1, &repeat_min, &repeat_max, errorcodeptr);
      if (*errorcodeptr != 0) goto FAILED;
      goto REPEAT;
-     case '*':
+     case CHAR_ASTERISK:
      repeat_min = 0;
      repeat_max = -1;
      goto REPEAT;
-     case '+':
+     case CHAR_PLUS:
      repeat_min = 1;
      repeat_max = -1;
      goto REPEAT;
-     case '?':
+     case CHAR_QUESTION_MARK:
      repeat_min = 0;
      repeat_max = 1;
-Line 3109 
 for (;; ptr++)
+Line 3750 
 for (;; ptr++)
      but if PCRE_UNGREEDY is set, it works the other way round. We change the
      repeat type to the non-default. */
-     if (ptr[1] == '+')
+     if (ptr[1] == CHAR_PLUS)
        {
        repeat_type = 0;                  /* Force greedy */
        possessive_quantifier = TRUE;
        ptr++;
        }
-     else if (ptr[1] == '?')
+     else if (ptr[1] == CHAR_QUESTION_MARK)
        {
        repeat_type = greedy_non_default;
        ptr++;
-Line 3230 
 for (;; ptr++)
+Line 3871 
 for (;; ptr++)
        if (repeat_max == 0) goto END_REPEAT;
+       /*--------------------------------------------------------------------*/
+       /* This code is obsolete from release 8.00; the restriction was finally
+       removed: */
        /* All real repeats make it impossible to handle partial matching (maybe
        one day we will be able to remove this restriction). */
-       if (repeat_max != 1) cd->nopartial = TRUE;
+       /* if (repeat_max != 1) cd->external_flags |= PCRE_NOPARTIAL; */
+       /*--------------------------------------------------------------------*/
        /* Combine the op_type with the repeat_type */
-Line 3380 
 for (;; ptr++)
+Line 4026 
 for (;; ptr++)
          goto END_REPEAT;
          }
+       /*--------------------------------------------------------------------*/
+       /* This code is obsolete from release 8.00; the restriction was finally
+       removed: */
        /* All real repeats make it impossible to handle partial matching (maybe
        one day we will be able to remove this restriction). */
-       if (repeat_max != 1) cd->nopartial = TRUE;
+       /* if (repeat_max != 1) cd->external_flags |= PCRE_NOPARTIAL; */
+       /*--------------------------------------------------------------------*/
        if (repeat_min == 0 && repeat_max == -1)
          *code++ = OP_CRSTAR + repeat_type;
-Line 3419 
 for (;; ptr++)
+Line 4070 
 for (;; ptr++)
          goto FAILED;
          }
-       /* This is a paranoid check to stop integer overflow later on */
-       if (len > MAX_DUPLENGTH)
-         {
-         *errorcodeptr = ERR50;
-         goto FAILED;
-         }
        /* If the maximum repeat count is unlimited, find the end of the bracket
        by scanning through from the start, and compute the offset back to it
        from the current code pointer. There may be an OP_OPT setting following
-Line 3449 
 for (;; ptr++)
+Line 4092 
 for (;; ptr++)
        if (repeat_min == 0)
          {
-         /* If the maximum is also zero, we just omit the group from the output
+         /* If the maximum is also zero, we used to just omit the group from the
-         altogether. */
+         output altogether, like this:
-         if (repeat_max == 0)
-           {
-           code = previous;
-           goto END_REPEAT;
-           }
-         /* If the maximum is 1 or unlimited, we just have to stick in the
+         ** if (repeat_max == 0)
-         BRAZERO and do no more at this point. However, we do need to adjust
+         **   {
-         any OP_RECURSE calls inside the group that refer to the group itself or
+         **   code = previous;
-         any internal or forward referenced group, because the offset is from
+         **   goto END_REPEAT;
-         the start of the whole regex. Temporarily terminate the pattern while
+         **   }
-         doing this. */
+         However, that fails when a group is referenced as a subroutine from
+         elsewhere in the pattern, so now we stick in OP_SKIPZERO in front of it
+         so that it is skipped on execution. As we don't have a list of which
+         groups are referenced, we cannot do this selectively.
+         If the maximum is 1 or unlimited, we just have to stick in the BRAZERO
+         and do no more at this point. However, we do need to adjust any
+         OP_RECURSE calls inside the group that refer to the group itself or any
+         internal or forward referenced group, because the offset is from the
+         start of the whole regex. Temporarily terminate the pattern while doing
+         this. */
-         if (repeat_max <= 1)
+         if (repeat_max <= 1)    /* Covers 0, 1, and unlimited */
            {
            *code = OP_END;
            adjust_recurse(previous, 1, utf8, cd, save_hwm);
            memmove(previous+1, previous, len);
            code++;
+           if (repeat_max == 0)
+             {
+             *previous++ = OP_SKIPZERO;
+             goto END_REPEAT;
+             }
            *previous++ = OP_BRAZERO + repeat_type;
            }
-Line 3515 
 for (;; ptr++)
+Line 4168 
 for (;; ptr++)
          if (repeat_min > 1)
            {
            /* In the pre-compile phase, we don't actually do the replication. We
-           just adjust the length as if we had. */
+           just adjust the length as if we had. Do some paranoid checks for
+           potential integer overflow. */
            if (lengthptr != NULL)
-             *lengthptr += (repeat_min - 1)*length_prevgroup;
+             {
+             int delta = (repeat_min - 1)*length_prevgroup;
+             if ((double)(repeat_min - 1)*(double)length_prevgroup >
+                                                             (double)INT_MAX ||
+                 OFLOW_MAX - *lengthptr < delta)
+               {
+               *errorcodeptr = ERR20;
+               goto FAILED;
+               }
+             *lengthptr += delta;
+             }
            /* This is compiling for real */
-Line 3556 
 for (;; ptr++)
+Line 4220 
 for (;; ptr++)
          /* In the pre-compile phase, we don't actually do the replication. We
          just adjust the length as if we had. For each repetition we must add 1
          to the length for BRAZERO and for all but the last repetition we must
-         add 2 + 2*LINKSIZE to allow for the nesting that occurs. */
+         add 2 + 2*LINKSIZE to allow for the nesting that occurs. Do some
+         paranoid checks to avoid integer overflow. */
          if (lengthptr != NULL && repeat_max > 0)
-           *lengthptr += repeat_max * (length_prevgroup + 1 + 2 + 2*LINK_SIZE) -
+           {
-- 2*LINK_SIZE;  /* Last one doesn't nest */
+           int delta = repeat_max * (length_prevgroup + 1 + 2 + 2*LINK_SIZE) -
+- 2*LINK_SIZE;   /* Last one doesn't nest */
+           if ((double)repeat_max *
+                 (double)(length_prevgroup + 1 + 2 + 2*LINK_SIZE)
+                   > (double)INT_MAX ||
+               OFLOW_MAX - *lengthptr < delta)
+             {
+             *errorcodeptr = ERR20;
+             goto FAILED;
+             }
+           *lengthptr += delta;
+           }
          /* This is compiling for real */
-Line 3642 
 for (;; ptr++)
+Line 4318 
 for (;; ptr++)
          }
        }
+     /* If previous is OP_FAIL, it was generated by an empty class [] in
+     JavaScript mode. The other ways in which OP_FAIL can be generated, that is
+     by (*FAIL) or (?!) set previous to NULL, which gives a "nothing to repeat"
+     error above. We can just ignore the repeat in JS case. */
+     else if (*previous == OP_FAIL) goto END_REPEAT;
      /* Else there's some kind of shambles */
      else
-Line 3666 
 for (;; ptr++)
+Line 4349 
 for (;; ptr++)
      if (possessive_quantifier)
        {
        int len;
-       if (*tempcode == OP_EXACT || *tempcode == OP_TYPEEXACT ||
-           *tempcode == OP_NOTEXACT)
+       if (*tempcode == OP_TYPEEXACT)
+         tempcode += _pcre_OP_lengths[*tempcode] +
+           ((tempcode[3] == OP_PROP || tempcode[3] == OP_NOTPROP)? 2 : 0);
+       else if (*tempcode == OP_EXACT || *tempcode == OP_NOTEXACT)
+         {
          tempcode += _pcre_OP_lengths[*tempcode];
+ #ifdef SUPPORT_UTF8
+         if (utf8 && tempcode[-1] >= 0xc0)
+           tempcode += _pcre_utf8_table4[tempcode[-1] & 0x3f];
+ #endif
+         }
        len = code - tempcode;
        if (len > 0) switch (*tempcode)
          {
-Line 3712 
 for (;; ptr++)
+Line 4406 
 for (;; ptr++)
      /* ===================================================================*/
      /* Start of nested parenthesized sub-expression, or comment or lookahead or
      lookbehind or option setting or condition or all the other extended
-     parenthesis forms. First deal with the specials; all are introduced by ?,
+     parenthesis forms.  */
-     and the appearance of any of them means that this is not a capturing
-     group. */
-     case '(':
+     case CHAR_LEFT_PARENTHESIS:
      newoptions = options;
      skipbytes = 0;
      bravalue = OP_CBRA;
      save_hwm = cd->hwm;
      reset_bracount = FALSE;
+     /* First deal with various "verbs" that can be introduced by '*'. */
-     if (*(++ptr) == '?')
+     if (*(++ptr) == CHAR_ASTERISK && (cd->ctypes[ptr[1]] & ctype_letter) != 0)
+       {
+       int i, namelen;
+       const char *vn = verbnames;
+       const uschar *name = ++ptr;
+       previous = NULL;
+       while ((cd->ctypes[*++ptr] & ctype_letter) != 0) {};
+       if (*ptr == CHAR_COLON)
+         {
+         *errorcodeptr = ERR59;   /* Not supported */
+         goto FAILED;
+         }
+       if (*ptr != CHAR_RIGHT_PARENTHESIS)
+         {
+         *errorcodeptr = ERR60;
+         goto FAILED;
+         }
+       namelen = ptr - name;
+       for (i = 0; i < verbcount; i++)
+         {
+         if (namelen == verbs[i].len &&
+             strncmp((char *)name, vn, namelen) == 0)
+           {
+           /* Check for open captures before ACCEPT */
+           if (verbs[i].op == OP_ACCEPT)
+             {
+             open_capitem *oc;
+             cd->had_accept = TRUE;
+             for (oc = cd->open_caps; oc != NULL; oc = oc->next)
+               {
+               *code++ = OP_CLOSE;
+               PUT2INC(code, 0, oc->number);
+               }
+             }
+           *code++ = verbs[i].op;
+           break;
+           }
+         vn += verbs[i].len + 1;
+         }
+       if (i < verbcount) continue;
+       *errorcodeptr = ERR60;
+       goto FAILED;
+       }
+     /* Deal with the extended parentheses; all are introduced by '?', and the
+     appearance of any of them means that this is not a capturing group. */
+     else if (*ptr == CHAR_QUESTION_MARK)
        {
        int i, set, unset, namelen;
        int *optset;
-Line 3732 
 for (;; ptr++)
+Line 4474 
 for (;; ptr++)
        switch (*(++ptr))
          {
-         case '#':                 /* Comment; skip to ket */
+         case CHAR_NUMBER_SIGN:                 /* Comment; skip to ket */
          ptr++;
-         while (*ptr != 0 && *ptr != ')') ptr++;
+         while (*ptr != 0 && *ptr != CHAR_RIGHT_PARENTHESIS) ptr++;
          if (*ptr == 0)
            {
            *errorcodeptr = ERR18;
-Line 3744 
 for (;; ptr++)
+Line 4486 
 for (;; ptr++)
          /* ------------------------------------------------------------ */
-         case '|':                 /* Reset capture count for each branch */
+         case CHAR_VERTICAL_LINE:  /* Reset capture count for each branch */
          reset_bracount = TRUE;
          /* Fall through */
          /* ------------------------------------------------------------ */
-         case ':':                 /* Non-capturing bracket */
+         case CHAR_COLON:          /* Non-capturing bracket */
          bravalue = OP_BRA;
          ptr++;
          break;
          /* ------------------------------------------------------------ */
-         case '(':
+         case CHAR_LEFT_PARENTHESIS:
          bravalue = OP_COND;       /* Conditional group */
          /* A condition can be an assertion, a number (referring to a numbered
-Line 3776 
 for (;; ptr++)
+Line 4518 
 for (;; ptr++)
          the switch. This will take control down to where bracketed groups,
          including assertions, are processed. */
-         if (ptr[1] == '?' && (ptr[2] == '=' || ptr[2] == '!' || ptr[2] == '<'))
+         if (ptr[1] == CHAR_QUESTION_MARK && (ptr[2] == CHAR_EQUALS_SIGN ||
+             ptr[2] == CHAR_EXCLAMATION_MARK || ptr[2] == CHAR_LESS_THAN_SIGN))
            break;
          /* Most other conditions use OP_CREF (a couple change to OP_RREF
-Line 3788 
 for (;; ptr++)
+Line 4531 
 for (;; ptr++)
          /* Check for a test for recursion in a named group. */
-         if (ptr[1] == 'R' && ptr[2] == '&')
+         if (ptr[1] == CHAR_R && ptr[2] == CHAR_AMPERSAND)
            {
            terminator = -1;
            ptr += 2;
-Line 3798 
 for (;; ptr++)
+Line 4541 
 for (;; ptr++)
          /* Check for a test for a named group's having been set, using the Perl
          syntax (?(<name>) or (?('name') */
-         else if (ptr[1] == '<')
+         else if (ptr[1] == CHAR_LESS_THAN_SIGN)
            {
-           terminator = '>';
+           terminator = CHAR_GREATER_THAN_SIGN;
            ptr++;
            }
-         else if (ptr[1] == '\'')
+         else if (ptr[1] == CHAR_APOSTROPHE)
            {
-           terminator = '\'';
+           terminator = CHAR_APOSTROPHE;
            ptr++;
            }
          else
            {
            terminator = 0;
-           if (ptr[1] == '-' || ptr[1] == '+') refsign = *(++ptr);
+           if (ptr[1] == CHAR_MINUS || ptr[1] == CHAR_PLUS) refsign = *(++ptr);
            }
          /* We now expect to read a name; any thing else is an error */
-Line 3831 
 for (;; ptr++)
+Line 4574 
 for (;; ptr++)
            {
            if (recno >= 0)
              recno = ((digitab[*ptr] & ctype_digit) != 0)?
-               recno * 10 + *ptr - '0' : -1;
+               recno * 10 + *ptr - CHAR_0 : -1;
            ptr++;
            }
          namelen = ptr - name;
-         if ((terminator > 0 && *ptr++ != terminator) || *ptr++ != ')')
+         if ((terminator > 0 && *ptr++ != terminator) ||
+             *ptr++ != CHAR_RIGHT_PARENTHESIS)
            {
            ptr--;      /* Error offset */
            *errorcodeptr = ERR26;
-Line 3858 
 for (;; ptr++)
+Line 4602 
 for (;; ptr++)
              *errorcodeptr = ERR58;
              goto FAILED;
              }
-           if (refsign == '-')
+           recno = (refsign == CHAR_MINUS)?
+             cd->bracount - recno + 1 : recno +cd->bracount;
+           if (recno <= 0 || recno > cd->final_bracount)
              {
-             recno = cd->bracount - recno + 1;
+             *errorcodeptr = ERR15;
-             if (recno <= 0)
+             goto FAILED;
-               {
-               *errorcodeptr = ERR15;
-               goto FAILED;
-               }
              }
-           else recno += cd->bracount;
            PUT2(code, 2+LINK_SIZE, recno);
            break;
            }
-Line 3892 
 for (;; ptr++)
+Line 4633 
 for (;; ptr++)
          /* Search the pattern for a forward reference */
-         else if ((i = find_parens(ptr, cd->bracount, name, namelen,
+         else if ((i = find_parens(cd, name, namelen,
                          (options & PCRE_EXTENDED) != 0)) > 0)
            {
            PUT2(code, 2+LINK_SIZE, i);
-Line 3913 
 for (;; ptr++)
+Line 4654 
 for (;; ptr++)
          /* Check for (?(R) for recursion. Allow digits after R to specify a
          specific group number. */
-         else if (*name == 'R')
+         else if (*name == CHAR_R)
            {
            recno = 0;
            for (i = 1; i < namelen; i++)
-Line 3923 
 for (;; ptr++)
+Line 4664 
 for (;; ptr++)
                *errorcodeptr = ERR15;
                goto FAILED;
                }
-             recno = recno * 10 + name[i] - '0';
+             recno = recno * 10 + name[i] - CHAR_0;
              }
            if (recno == 0) recno = RREF_ANY;
            code[1+LINK_SIZE] = OP_RREF;      /* Change test type */
-Line 3933 
 for (;; ptr++)
+Line 4674 
 for (;; ptr++)
          /* Similarly, check for the (?(DEFINE) "condition", which is always
          false. */
-         else if (namelen == 6 && strncmp((char *)name, "DEFINE", 6) == 0)
+         else if (namelen == 6 && strncmp((char *)name, STRING_DEFINE, 6) == 0)
            {
            code[1+LINK_SIZE] = OP_DEF;
            skipbytes = 1;
            }
-         /* Check for the "name" actually being a subpattern number. */
+         /* Check for the "name" actually being a subpattern number. We are
+         in the second pass here, so final_bracount is set. */
-         else if (recno > 0)
+         else if (recno > 0 && recno <= cd->final_bracount)
            {
            PUT2(code, 2+LINK_SIZE, recno);
            }
-Line 3957 
 for (;; ptr++)
+Line 4699 
 for (;; ptr++)
          /* ------------------------------------------------------------ */
-         case '=':                 /* Positive lookahead */
+         case CHAR_EQUALS_SIGN:                 /* Positive lookahead */
          bravalue = OP_ASSERT;
          ptr++;
          break;
          /* ------------------------------------------------------------ */
-         case '!':                 /* Negative lookahead */
+         case CHAR_EXCLAMATION_MARK:            /* Negative lookahead */
-         bravalue = OP_ASSERT_NOT;
          ptr++;
+         if (*ptr == CHAR_RIGHT_PARENTHESIS)    /* Optimize (?!) */
+           {
+           *code++ = OP_FAIL;
+           previous = NULL;
+           continue;
+           }
+         bravalue = OP_ASSERT_NOT;
          break;
          /* ------------------------------------------------------------ */
-         case '<':                 /* Lookbehind or named define */
+         case CHAR_LESS_THAN_SIGN:              /* Lookbehind or named define */
          switch (ptr[1])
            {
-           case '=':               /* Positive lookbehind */
+           case CHAR_EQUALS_SIGN:               /* Positive lookbehind */
            bravalue = OP_ASSERTBACK;
            ptr += 2;
            break;
-           case '!':               /* Negative lookbehind */
+           case CHAR_EXCLAMATION_MARK:          /* Negative lookbehind */
            bravalue = OP_ASSERTBACK_NOT;
            ptr += 2;
            break;
-Line 3994 
 for (;; ptr++)
+Line 4742 
 for (;; ptr++)
          /* ------------------------------------------------------------ */
-         case '>':                 /* One-time brackets */
+         case CHAR_GREATER_THAN_SIGN:           /* One-time brackets */
          bravalue = OP_ONCE;
          ptr++;
          break;
          /* ------------------------------------------------------------ */
-         case 'C':                 /* Callout - may be followed by digits; */
+         case CHAR_C:                 /* Callout - may be followed by digits; */
          previous_callout = code;  /* Save for later completion */
          after_manual_callout = 1; /* Skip one item before completing */
          *code++ = OP_CALLOUT;
            {
            int n = 0;
            while ((digitab[*(++ptr)] & ctype_digit) != 0)
-             n = n * 10 + *ptr - '0';
+             n = n * 10 + *ptr - CHAR_0;
-           if (*ptr != ')')
+           if (*ptr != CHAR_RIGHT_PARENTHESIS)
              {
              *errorcodeptr = ERR39;
              goto FAILED;
-Line 4029 
 for (;; ptr++)
+Line 4777 
 for (;; ptr++)
          /* ------------------------------------------------------------ */
-         case 'P':                 /* Python-style named subpattern handling */
+         case CHAR_P:              /* Python-style named subpattern handling */
-         if (*(++ptr) == '=' || *ptr == '>')  /* Reference or recursion */
+         if (*(++ptr) == CHAR_EQUALS_SIGN ||
+             *ptr == CHAR_GREATER_THAN_SIGN)  /* Reference or recursion */
            {
-           is_recurse = *ptr == '>';
+           is_recurse = *ptr == CHAR_GREATER_THAN_SIGN;
-           terminator = ')';
+           terminator = CHAR_RIGHT_PARENTHESIS;
            goto NAMED_REF_OR_RECURSE;
            }
-         else if (*ptr != '<')    /* Test for Python-style definition */
+         else if (*ptr != CHAR_LESS_THAN_SIGN)  /* Test for Python-style defn */
            {
            *errorcodeptr = ERR41;
            goto FAILED;
-Line 4046 
 for (;; ptr++)
+Line 4795 
 for (;; ptr++)
          /* ------------------------------------------------------------ */
          DEFINE_NAME:    /* Come here from (?< handling */
-         case '\'':
+         case CHAR_APOSTROPHE:
            {
-           terminator = (*ptr == '<')? '>' : '\'';
+           terminator = (*ptr == CHAR_LESS_THAN_SIGN)?
+             CHAR_GREATER_THAN_SIGN : CHAR_APOSTROPHE;
            name = ++ptr;
            while ((cd->ctypes[*ptr] & ctype_word) != 0) ptr++;
-Line 4122 
 for (;; ptr++)
+Line 4872 
 for (;; ptr++)
          /* ------------------------------------------------------------ */
-         case '&':                 /* Perl recursion/subroutine syntax */
+         case CHAR_AMPERSAND:            /* Perl recursion/subroutine syntax */
-         terminator = ')';
+         terminator = CHAR_RIGHT_PARENTHESIS;
          is_recurse = TRUE;
          /* Fall through */
          /* We come here from the Python syntax above that handles both
          references (?P=name) and recursion (?P>name), as well as falling
-         through from the Perl recursion syntax (?&name). */
+         through from the Perl recursion syntax (?&name). We also come here from
+         the Perl \k<name> or \k'name' back reference syntax and the \k{name}
+         .NET syntax, and the Oniguruma \g<...> and \g'...' subroutine syntax. */
          NAMED_REF_OR_RECURSE:
          name = ++ptr;
-Line 4141 
 for (;; ptr++)
+Line 4893 
 for (;; ptr++)
          if (lengthptr != NULL)
            {
+           if (namelen == 0)
+             {
+             *errorcodeptr = ERR62;
+             goto FAILED;
+             }
            if (*ptr != terminator)
              {
              *errorcodeptr = ERR42;
-Line 4154 
 for (;; ptr++)
+Line 4911 
 for (;; ptr++)
            recno = 0;
            }
-         /* In the real compile, seek the name in the table */
+         /* In the real compile, seek the name in the table. We check the name
+         first, and then check that we have reached the end of the name in the
+         table. That way, if the name that is longer than any in the table,
+         the comparison will fail without reading beyond the table entry. */
          else
            {
            slot = cd->name_table;
            for (i = 0; i < cd->names_found; i++)
              {
-             if (strncmp((char *)name, (char *)slot+2, namelen) == 0) break;
+             if (strncmp((char *)name, (char *)slot+2, namelen) == 0 &&
+                 slot[2+namelen] == 0)
+               break;
              slot += cd->name_entry_size;
              }
-Line 4170 
 for (;; ptr++)
+Line 4932 
 for (;; ptr++)
              recno = GET2(slot, 0);
              }
            else if ((recno =                /* Forward back reference */
-                     find_parens(ptr, cd->bracount, name, namelen,
+                     find_parens(cd, name, namelen,
                        (options & PCRE_EXTENDED) != 0)) <= 0)
              {
              *errorcodeptr = ERR15;
-Line 4186 
 for (;; ptr++)
+Line 4948 
 for (;; ptr++)
          /* ------------------------------------------------------------ */
-         case 'R':                 /* Recursion */
+         case CHAR_R:              /* Recursion */
          ptr++;                    /* Same as (?0)      */
          /* Fall through */
          /* ------------------------------------------------------------ */
-         case '-': case '+':
+         case CHAR_MINUS: case CHAR_PLUS:  /* Recursion or subroutine */
-         case '0': case '1': case '2': case '3': case '4':   /* Recursion or */
+         case CHAR_0: case CHAR_1: case CHAR_2: case CHAR_3: case CHAR_4:
-         case '5': case '6': case '7': case '8': case '9':   /* subroutine */
+         case CHAR_5: case CHAR_6: case CHAR_7: case CHAR_8: case CHAR_9:
            {
            const uschar *called;
+           terminator = CHAR_RIGHT_PARENTHESIS;
+           /* Come here from the \g<...> and \g'...' code (Oniguruma
+           compatibility). However, the syntax has been checked to ensure that
+           the ... are a (signed) number, so that neither ERR63 nor ERR29 will
+           be called on this path, nor with the jump to OTHER_CHAR_AFTER_QUERY
+           ever be taken. */
-           if ((refsign = *ptr) == '+') ptr++;
+           HANDLE_NUMERICAL_RECURSION:
-           else if (refsign == '-')
+           if ((refsign = *ptr) == CHAR_PLUS)
+             {
+             ptr++;
+             if ((digitab[*ptr] & ctype_digit) == 0)
+               {
+               *errorcodeptr = ERR63;
+               goto FAILED;
+               }
+             }
+           else if (refsign == CHAR_MINUS)
              {
              if ((digitab[ptr[1]] & ctype_digit) == 0)
                goto OTHER_CHAR_AFTER_QUERY;
-Line 4208 
 for (;; ptr++)
+Line 4987 
 for (;; ptr++)
            recno = 0;
            while((digitab[*ptr] & ctype_digit) != 0)
-             recno = recno * 10 + *ptr++ - '0';
+             recno = recno * 10 + *ptr++ - CHAR_0;
-           if (*ptr != ')')
+           if (*ptr != terminator)
              {
              *errorcodeptr = ERR29;
              goto FAILED;
              }
-           if (refsign == '-')
+           if (refsign == CHAR_MINUS)
              {
              if (recno == 0)
                {
-Line 4230 
 for (;; ptr++)
+Line 5009 
 for (;; ptr++)
                goto FAILED;
                }
              }
-           else if (refsign == '+')
+           else if (refsign == CHAR_PLUS)
              {
              if (recno == 0)
                {
-Line 4263 
 for (;; ptr++)
+Line 5042 
 for (;; ptr++)
              if (called == NULL)
                {
-               if (find_parens(ptr, cd->bracount, NULL, recno,
+               if (find_parens(cd, NULL, recno,
-                    (options & PCRE_EXTENDED) != 0) < 0)
+                     (options & PCRE_EXTENDED) != 0) < 0)
                  {
                  *errorcodeptr = ERR15;
                  goto FAILED;
-Line 4316 
 for (;; ptr++)
+Line 5095 
 for (;; ptr++)
          set = unset = 0;
          optset = &set;
-         while (*ptr != ')' && *ptr != ':')
+         while (*ptr != CHAR_RIGHT_PARENTHESIS && *ptr != CHAR_COLON)
            {
            switch (*ptr++)
              {
-             case '-': optset = &unset; break;
+             case CHAR_MINUS: optset = &unset; break;
-             case 'J':    /* Record that it changed in the external options */
+             case CHAR_J:    /* Record that it changed in the external options */
              *optset |= PCRE_DUPNAMES;
-             cd->external_options |= PCRE_JCHANGED;
+             cd->external_flags |= PCRE_JCHANGED;
              break;
-             case 'i': *optset |= PCRE_CASELESS; break;
+             case CHAR_i: *optset |= PCRE_CASELESS; break;
-             case 'm': *optset |= PCRE_MULTILINE; break;
+             case CHAR_m: *optset |= PCRE_MULTILINE; break;
-             case 's': *optset |= PCRE_DOTALL; break;
+             case CHAR_s: *optset |= PCRE_DOTALL; break;
-             case 'x': *optset |= PCRE_EXTENDED; break;
+             case CHAR_x: *optset |= PCRE_EXTENDED; break;
-             case 'U': *optset |= PCRE_UNGREEDY; break;
+             case CHAR_U: *optset |= PCRE_UNGREEDY; break;
-             case 'X': *optset |= PCRE_EXTRA; break;
+             case CHAR_X: *optset |= PCRE_EXTRA; break;
              default:  *errorcodeptr = ERR12;
                        ptr--;    /* Correct the offset */
-Line 4363 
 for (;; ptr++)
+Line 5142 
 for (;; ptr++)
          both phases.
          If we are not at the pattern start, compile code to change the ims
-         options if this setting actually changes any of them. We also pass the
+         options if this setting actually changes any of them, and reset the
-         new setting back so that it can be put at the start of any following
+         greedy defaults and the case value for firstbyte and reqbyte. */
-         branches, and when this group ends (if we are in a group), a resetting
-         item can be compiled. */
-         if (*ptr == ')')
+         if (*ptr == CHAR_RIGHT_PARENTHESIS)
            {
            if (code == cd->start_code + 1 + LINK_SIZE &&
                 (lengthptr == NULL || *lengthptr == 2 + 2*LINK_SIZE))
              {
              cd->external_options = newoptions;
-             options = newoptions;
              }
           else
              {
-Line 4383 
 for (;; ptr++)
+Line 5159 
 for (;; ptr++)
                *code++ = OP_OPT;
                *code++ = newoptions & PCRE_IMS;
                }
-             /* Change options at this level, and pass them back for use
-             in subsequent branches. Reset the greedy defaults and the case
-             value for firstbyte and reqbyte. */
-             *optionsptr = options = newoptions;
              greedy_default = ((newoptions & PCRE_UNGREEDY) != 0);
              greedy_non_default = greedy_default ^ 1;
-             req_caseopt = ((options & PCRE_CASELESS) != 0)? REQ_CASELESS : 0;
+             req_caseopt = ((newoptions & PCRE_CASELESS) != 0)? REQ_CASELESS : 0;
              }
+           /* Change options at this level, and pass them back for use
+           in subsequent branches. When not at the start of the pattern, this
+           information is also necessary so that a resetting item can be
+           compiled at the end of a group (if we are in a group). */
+           *optionsptr = options = newoptions;
            previous = NULL;       /* This item can't be repeated */
            continue;              /* It is complete */
            }
-Line 4447 
 for (;; ptr++)
+Line 5223 
 for (;; ptr++)
           errorcodeptr,                 /* Where to put an error message */
           (bravalue == OP_ASSERTBACK ||
            bravalue == OP_ASSERTBACK_NOT), /* TRUE if back assert */
           reset_bracount,               /* True if (?| group */
           skipbytes,                    /* Skip over bracket number */
           &subfirstbyte,                /* For possible first char */
           &subreqbyte,                  /* For possible last char */
-Line 4509 
 for (;; ptr++)
+Line 5285 
 for (;; ptr++)
      /* Error if hit end of pattern */
-     if (*ptr != ')')
+     if (*ptr != CHAR_RIGHT_PARENTHESIS)
        {
        *errorcodeptr = ERR14;
        goto FAILED;
        }
-     /* In the pre-compile phase, update the length by the length of the nested
+     /* In the pre-compile phase, update the length by the length of the group,
-     group, less the brackets at either end. Then reduce the compiled code to
+     less the brackets at either end. Then reduce the compiled code to just a
-     just the brackets so that it doesn't use much memory if it is duplicated by
+     set of non-capturing brackets so that it doesn't use much memory if it is
-     a quantifier. */
+     duplicated by a quantifier.*/
      if (lengthptr != NULL)
        {
+       if (OFLOW_MAX - *lengthptr < length_prevgroup - 2 - 2*LINK_SIZE)
+         {
+         *errorcodeptr = ERR20;
+         goto FAILED;
+         }
        *lengthptr += length_prevgroup - 2 - 2*LINK_SIZE;
-       code++;
+       *code++ = OP_BRA;
        PUTINC(code, 0, 1 + LINK_SIZE);
        *code++ = OP_KET;
        PUTINC(code, 0, 1 + LINK_SIZE);
+       break;    /* No need to waste time with special character handling */
        }
      /* Otherwise update the main code pointer to the end of the group. */
-     else code = tempcode;
+     code = tempcode;
      /* For a DEFINE group, required and first character settings are not
      relevant. */
-Line 4601 
 for (;; ptr++)
+Line 5383 
 for (;; ptr++)
      We can test for values between ESC_b and ESC_Z for the latter; this may
      have to change if any new ones are ever created. */
-     case '\\':
+     case CHAR_BACKSLASH:
      tempptr = ptr;
      c = check_escape(&ptr, errorcodeptr, cd->bracount, options, FALSE);
      if (*errorcodeptr != 0) goto FAILED;
-Line 4610 
 for (;; ptr++)
+Line 5392 
 for (;; ptr++)
        {
        if (-c == ESC_Q)            /* Handle start of quoted string */
          {
-         if (ptr[1] == '\\' && ptr[2] == 'E') ptr += 2; /* avoid empty string */
+         if (ptr[1] == CHAR_BACKSLASH && ptr[2] == CHAR_E)
-           else inescq = TRUE;
+           ptr += 2;               /* avoid empty string */
+             else inescq = TRUE;
          continue;
          }
-Line 4628 
 for (;; ptr++)
+Line 5411 
 for (;; ptr++)
        zerofirstbyte = firstbyte;
        zeroreqbyte = reqbyte;
+       /* \g<name> or \g'name' is a subroutine call by name and \g<n> or \g'n'
+       is a subroutine call by number (Oniguruma syntax). In fact, the value
+       -ESC_g is returned only for these cases. So we don't need to check for <
+       or ' if the value is -ESC_g. For the Perl syntax \g{n} the value is
+       -ESC_REF+n, and for the Perl syntax \g{name} the result is -ESC_k (as
+       that is a synonym for a named back reference). */
+       if (-c == ESC_g)
+         {
+         const uschar *p;
+         save_hwm = cd->hwm;   /* Normally this is set when '(' is read */
+         terminator = (*(++ptr) == CHAR_LESS_THAN_SIGN)?
+           CHAR_GREATER_THAN_SIGN : CHAR_APOSTROPHE;
+         /* These two statements stop the compiler for warning about possibly
+         unset variables caused by the jump to HANDLE_NUMERICAL_RECURSION. In
+         fact, because we actually check for a number below, the paths that
+         would actually be in error are never taken. */
+         skipbytes = 0;
+         reset_bracount = FALSE;
+         /* Test for a name */
+         if (ptr[1] != CHAR_PLUS && ptr[1] != CHAR_MINUS)
+           {
+           BOOL isnumber = TRUE;
+           for (p = ptr + 1; *p != 0 && *p != terminator; p++)
+             {
+             if ((cd->ctypes[*p] & ctype_digit) == 0) isnumber = FALSE;
+             if ((cd->ctypes[*p] & ctype_word) == 0) break;
+             }
+           if (*p != terminator)
+             {
+             *errorcodeptr = ERR57;
+             break;
+             }
+           if (isnumber)
+             {
+             ptr++;
+             goto HANDLE_NUMERICAL_RECURSION;
+             }
+           is_recurse = TRUE;
+           goto NAMED_REF_OR_RECURSE;
+           }
+         /* Test a signed number in angle brackets or quotes. */
+         p = ptr + 2;
+         while ((digitab[*p] & ctype_digit) != 0) p++;
+         if (*p != terminator)
+           {
+           *errorcodeptr = ERR57;
+           break;
+           }
+         ptr++;
+         goto HANDLE_NUMERICAL_RECURSION;
+         }
        /* \k<name> or \k'name' is a back reference by name (Perl syntax).
        We also support \k{name} (.NET syntax) */
-       if (-c == ESC_k && (ptr[1] == '<' || ptr[1] == '\'' || ptr[1] == '{'))
+       if (-c == ESC_k && (ptr[1] == CHAR_LESS_THAN_SIGN ||
+           ptr[1] == CHAR_APOSTROPHE || ptr[1] == CHAR_LEFT_CURLY_BRACKET))
          {
          is_recurse = FALSE;
-         terminator = (*(++ptr) == '<')? '>' : (*ptr == '\'')? '\'' : '}';
+         terminator = (*(++ptr) == CHAR_LESS_THAN_SIGN)?
+           CHAR_GREATER_THAN_SIGN : (*ptr == CHAR_APOSTROPHE)?
+           CHAR_APOSTROPHE : CHAR_RIGHT_CURLY_BRACKET;
          goto NAMED_REF_OR_RECURSE;
          }
-Line 4735 
 for (;; ptr++)
+Line 5580 
 for (;; ptr++)
      *code++ = ((options & PCRE_CASELESS) != 0)? OP_CHARNC : OP_CHAR;
      for (c = 0; c < mclength; c++) *code++ = mcbuffer[c];
+     /* Remember if \r or \n were seen */
+     if (mcbuffer[0] == CHAR_CR || mcbuffer[0] == CHAR_NL)
+       cd->external_flags |= PCRE_HASCRORLF;
      /* Set the first and required bytes appropriately. If no previous first
      byte, set it from this character, but revert to none on a zero repeat.
      Otherwise, leave the firstbyte value alone, and don't change it on a zero
-Line 4807 
 Arguments:
+Line 5657 
 Arguments:
    ptrptr         -> the address of the current pattern pointer
    errorcodeptr   -> pointer to error code variable
    lookbehind     TRUE if this is a lookbehind assertion
    reset_bracount TRUE to reset the count for each branch
    skipbytes      skip this many bytes at start (for brackets and OP_COND)
    firstbyteptr   place to put the first required character, or a negative number
    reqbyteptr     place to put the last required character, or a negative number
-Line 4821 
 Returns:         TRUE on success
+Line 5671 
 Returns:         TRUE on success
  static BOOL
  compile_regex(int options, int oldims, uschar **codeptr, const uschar **ptrptr,
    int *errorcodeptr, BOOL lookbehind, BOOL reset_bracount, int skipbytes,
    int *firstbyteptr, int *reqbyteptr, branch_chain *bcptr, compile_data *cd,
    int *lengthptr)
  {
  const uschar *ptr = *ptrptr;
-Line 4830 
 uschar *code = *codeptr;
+Line 5680 
 uschar *code = *codeptr;
  uschar *last_branch = code;
  uschar *start_bracket = code;
  uschar *reverse_count = NULL;
+ open_capitem capitem;
+ int capnumber = 0;
  int firstbyte, reqbyte;
  int branchfirstbyte, branchreqbyte;
  int length;
-Line 4856 
 the code that abstracts option settings
+Line 5708 
 the code that abstracts option settings
  them global. It tests the value of length for (2 + 2*LINK_SIZE) in the
  pre-compile phase to find out whether anything has yet been compiled or not. */
+ /* If this is a capturing subpattern, add to the chain of open capturing items
+ so that we can detect them if (*ACCEPT) is encountered. */
+ if (*code == OP_CBRA)
+   {
+   capnumber = GET2(code, 1 + LINK_SIZE);
+   capitem.number = capnumber;
+   capitem.next = cd->open_caps;
+   cd->open_caps = &capitem;
+   }
  /* Offset is set zero to mark that this bracket is still open */
  PUT(code, 1, 0);
-Line 4867 
 orig_bracount = max_bracount = cd->braco
+Line 5730 
 orig_bracount = max_bracount = cd->braco
  for (;;)
    {
    /* For a (?| group, reset the capturing bracket count so that each branch
    uses the same numbers. */
    if (reset_bracount) cd->bracount = orig_bracount;
    /* Handle a change of ims options at the start of the branch */
    if ((options & PCRE_IMS) != oldims)
-Line 4899 
 for (;;)
+Line 5762 
 for (;;)
      *ptrptr = ptr;
      return FALSE;
      }
    /* Keep the highest bracket count in case (?| was used and some branch
    has fewer than the rest. */
    if (cd->bracount > max_bracount) max_bracount = cd->bracount;
    /* In the real compile phase, there is some post-processing to be done. */
-Line 4977 
 for (;;)
+Line 5840 
 for (;;)
    compile a resetting op-code following, except at the very end of the pattern.
    Return leaving the pointer at the terminating char. */
-   if (*ptr != '|')
+   if (*ptr != CHAR_VERTICAL_LINE)
      {
      if (lengthptr == NULL)
        {
-Line 4991 
 for (;;)
+Line 5854 
 for (;;)
          }
        while (branch_length > 0);
        }
+     /* If it was a capturing subpattern, remove it from the chain. */
+     if (capnumber > 0) cd->open_caps = cd->open_caps->next;
      /* Fill in the ket */
-Line 5000 
 for (;;)
+Line 5867 
 for (;;)
      /* Resetting option if needed */
-     if ((options & PCRE_IMS) != oldims && *ptr == ')')
+     if ((options & PCRE_IMS) != oldims && *ptr == CHAR_RIGHT_PARENTHESIS)
        {
        *code++ = OP_OPT;
        *code++ = oldims;
        length += 2;
        }
      /* Retain the highest bracket number, in case resetting was used. */
      cd->bracount = max_bracount;
      /* Set values to pass back */
-Line 5017 
 for (;;)
+Line 5884 
 for (;;)
      *ptrptr = ptr;
      *firstbyteptr = firstbyte;
      *reqbyteptr = reqbyte;
-     if (lengthptr != NULL) *lengthptr += length;
+     if (lengthptr != NULL)
+       {
+       if (OFLOW_MAX - *lengthptr < length)
+         {
+         *errorcodeptr = ERR20;
+         return FALSE;
+         }
+       *lengthptr += length;
+       }
      return TRUE;
      }
-Line 5121 
 do {
+Line 5996 
 do {
       if (!is_anchored(scode, options, bracket_map, backref_map)) return FALSE;
       }
-    /* .* is not anchored unless DOTALL is set and it isn't in brackets that
+    /* .* is not anchored unless DOTALL is set (which generates OP_ALLANY) and
-    are or may be referenced. */
+    it isn't in brackets that are or may be referenced. */
     else if ((op == OP_TYPESTAR || op == OP_TYPEMINSTAR ||
-              op == OP_TYPEPOSSTAR) &&
+              op == OP_TYPEPOSSTAR))
-             (*options & PCRE_DOTALL) != 0)
       {
-      if (scode[1] != OP_ANY || (bracket_map & backref_map) != 0) return FALSE;
+      if (scode[1] != OP_ALLANY || (bracket_map & backref_map) != 0)
+        return FALSE;
       }
     /* Check for explicit anchoring */
-Line 5174 
 do {
+Line 6049 
 do {
       NULL, 0, FALSE);
     register int op = *scode;
+    /* If we are at the start of a conditional assertion group, *both* the
+    conditional assertion *and* what follows the condition must satisfy the test
+    for start of line. Other kinds of condition fail. Note that there may be an
+    auto-callout at the start of a condition. */
+    if (op == OP_COND)
+      {
+      scode += 1 + LINK_SIZE;
+      if (*scode == OP_CALLOUT) scode += _pcre_OP_lengths[OP_CALLOUT];
+      switch (*scode)
+        {
+        case OP_CREF:
+        case OP_RREF:
+        case OP_DEF:
+        return FALSE;
+        default:     /* Assertion */
+        if (!is_startline(scode, bracket_map, backref_map)) return FALSE;
+        do scode += GET(scode, 1); while (*scode == OP_ALT);
+        scode += 1 + LINK_SIZE;
+        break;
+        }
+      scode = first_significant_code(scode, NULL, 0, FALSE);
+      op = *scode;
+      }
     /* Non-capturing brackets */
     if (op == OP_BRA)
-Line 5192 
 do {
+Line 6093 
 do {
     /* Other brackets */
-    else if (op == OP_ASSERT || op == OP_ONCE || op == OP_COND)
+    else if (op == OP_ASSERT || op == OP_ONCE)
-      { if (!is_startline(scode, bracket_map, backref_map)) return FALSE; }
+      {
+      if (!is_startline(scode, bracket_map, backref_map)) return FALSE;
+      }
     /* .* means "start at start or after \n" if it isn't in brackets that
     may be referenced. */
-Line 5310 
 Returns:        pointer to compiled data
+Line 6213 
 Returns:        pointer to compiled data
                  with errorptr and erroroffset set
  */
- PCRE_EXP_DEFN pcre *
+ PCRE_EXP_DEFN pcre * PCRE_CALL_CONVENTION
  pcre_compile(const char *pattern, int options, const char **errorptr,
    int *erroroffset, const unsigned char *tables)
  {
-Line 5318 
 return pcre_compile2(pattern, options, N
+Line 6221 
 return pcre_compile2(pattern, options, N
  }
- PCRE_EXP_DEFN pcre *
+ PCRE_EXP_DEFN pcre * PCRE_CALL_CONVENTION
  pcre_compile2(const char *pattern, int options, int *errorcodeptr,
    const char **errorptr, int *erroroffset, const unsigned char *tables)
  {
-Line 5326 
 real_pcre *re;
+Line 6229 
 real_pcre *re;
  int length = 1;  /* For final END opcode */
  int firstbyte, reqbyte, newline;
  int errorcode = 0;
+ int skipatstart = 0;
  #ifdef SUPPORT_UTF8
  BOOL utf8;
  #endif
-Line 5344 
 to fill in forward references to subpatt
+Line 6248 
 to fill in forward references to subpatt
  uschar cworkspace[COMPILE_WORK_SIZE];
  /* Set this early so that early errors get offset 0. */
  ptr = (const uschar *)pattern;
-Line 5372 
 if (erroroffset == NULL)
+Line 6275 
 if (erroroffset == NULL)
  *erroroffset = 0;
+ /* Set up pointers to the individual character tables */
+ if (tables == NULL) tables = _pcre_default_tables;
+ cd->lcc = tables + lcc_offset;
+ cd->fcc = tables + fcc_offset;
+ cd->cbits = tables + cbits_offset;
+ cd->ctypes = tables + ctypes_offset;
+ /* Check that all undefined public option bits are zero */
+ if ((options & ~PUBLIC_COMPILE_OPTIONS) != 0)
+   {
+   errorcode = ERR17;
+   goto PCRE_EARLY_ERROR_RETURN;
+   }
+ /* Check for global one-time settings at the start of the pattern, and remember
+ the offset for later. */
+ while (ptr[skipatstart] == CHAR_LEFT_PARENTHESIS &&
+        ptr[skipatstart+1] == CHAR_ASTERISK)
+   {
+   int newnl = 0;
+   int newbsr = 0;
+   if (strncmp((char *)(ptr+skipatstart+2), STRING_UTF8_RIGHTPAR, 5) == 0)
+     { skipatstart += 7; options |= PCRE_UTF8; continue; }
+   if (strncmp((char *)(ptr+skipatstart+2), STRING_CR_RIGHTPAR, 3) == 0)
+     { skipatstart += 5; newnl = PCRE_NEWLINE_CR; }
+   else if (strncmp((char *)(ptr+skipatstart+2), STRING_LF_RIGHTPAR, 3)  == 0)
+     { skipatstart += 5; newnl = PCRE_NEWLINE_LF; }
+   else if (strncmp((char *)(ptr+skipatstart+2), STRING_CRLF_RIGHTPAR, 5)  == 0)
+     { skipatstart += 7; newnl = PCRE_NEWLINE_CR + PCRE_NEWLINE_LF; }
+   else if (strncmp((char *)(ptr+skipatstart+2), STRING_ANY_RIGHTPAR, 4) == 0)
+     { skipatstart += 6; newnl = PCRE_NEWLINE_ANY; }
+   else if (strncmp((char *)(ptr+skipatstart+2), STRING_ANYCRLF_RIGHTPAR, 8) == 0)
+     { skipatstart += 10; newnl = PCRE_NEWLINE_ANYCRLF; }
+   else if (strncmp((char *)(ptr+skipatstart+2), STRING_BSR_ANYCRLF_RIGHTPAR, 12) == 0)
+     { skipatstart += 14; newbsr = PCRE_BSR_ANYCRLF; }
+   else if (strncmp((char *)(ptr+skipatstart+2), STRING_BSR_UNICODE_RIGHTPAR, 12) == 0)
+     { skipatstart += 14; newbsr = PCRE_BSR_UNICODE; }
+   if (newnl != 0)
+     options = (options & ~PCRE_NEWLINE_BITS) | newnl;
+   else if (newbsr != 0)
+     options = (options & ~(PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE)) | newbsr;
+   else break;
+   }
  /* Can't support UTF8 unless PCRE has been compiled to include the code. */
  #ifdef SUPPORT_UTF8
-Line 5390 
 if ((options & PCRE_UTF8) != 0)
+Line 6344 
 if ((options & PCRE_UTF8) != 0)
    }
  #endif
- if ((options & ~PUBLIC_OPTIONS) != 0)
+ /* Check validity of \R options. */
+ switch (options & (PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE))
    {
-   errorcode = ERR17;
+   case 0:
-   goto PCRE_EARLY_ERROR_RETURN;
+   case PCRE_BSR_ANYCRLF:
+   case PCRE_BSR_UNICODE:
+   break;
+   default: errorcode = ERR56; goto PCRE_EARLY_ERROR_RETURN;
    }
- /* Set up pointers to the individual character tables */
- if (tables == NULL) tables = _pcre_default_tables;
- cd->lcc = tables + lcc_offset;
- cd->fcc = tables + fcc_offset;
- cd->cbits = tables + cbits_offset;
- cd->ctypes = tables + ctypes_offset;
  /* Handle different types of newline. The three bits give seven cases. The
  current code allows for fixed one- or two-byte sequences, plus "any" and
  "anycrlf". */
- switch (options & (PCRE_NEWLINE_CRLF | PCRE_NEWLINE_ANY))
+ switch (options & PCRE_NEWLINE_BITS)
    {
-   case 0: newline = NEWLINE; break;   /* Compile-time default */
+   case 0: newline = NEWLINE; break;   /* Build-time default */
-   case PCRE_NEWLINE_CR: newline = '\r'; break;
+   case PCRE_NEWLINE_CR: newline = CHAR_CR; break;
-   case PCRE_NEWLINE_LF: newline = '\n'; break;
+   case PCRE_NEWLINE_LF: newline = CHAR_NL; break;
    case PCRE_NEWLINE_CR+
-        PCRE_NEWLINE_LF: newline = ('\r' << 8) | '\n'; break;
+        PCRE_NEWLINE_LF: newline = (CHAR_CR << 8) | CHAR_NL; break;
    case PCRE_NEWLINE_ANY: newline = -1; break;
    case PCRE_NEWLINE_ANYCRLF: newline = -2; break;
    default: errorcode = ERR56; goto PCRE_EARLY_ERROR_RETURN;
-Line 5463 
 to compile parts of the pattern into; th
+Line 6414 
 to compile parts of the pattern into; th
  no longer needed, so hopefully this workspace will never overflow, though there
  is a test for its doing so. */
- cd->bracount = 0;
+ cd->bracount = cd->final_bracount = 0;
  cd->names_found = 0;
  cd->name_entry_size = 0;
  cd->name_table = NULL;
-Line 5473 
 cd->hwm = cworkspace;
+Line 6424 
 cd->hwm = cworkspace;
  cd->start_pattern = (const uschar *)pattern;
  cd->end_pattern = (const uschar *)(pattern + strlen(pattern));
  cd->req_varyopt = 0;
- cd->nopartial = FALSE;
  cd->external_options = options;
+ cd->external_flags = 0;
+ cd->open_caps = NULL;
  /* Now do the pre-compile. On error, errorcode will be set non-zero, so we
  don't need to look at the result of the function here. The initial options have
-Line 5482 
 been put into the cd block so that they
+Line 6434 
 been put into the cd block so that they
  found within the regex right at the beginning. Bringing initial option settings
  outside can help speed up starting point checks. */
+ ptr += skipatstart;
  code = cworkspace;
  *code = OP_BRA;
  (void)compile_regex(cd->external_options, cd->external_options & PCRE_IMS,
    &code, &ptr, &errorcode, FALSE, FALSE, 0, &firstbyte, &reqbyte, NULL, cd,
    &length);
  if (errorcode != 0) goto PCRE_EARLY_ERROR_RETURN;
-Line 5512 
 if (re == NULL)
+Line 6465 
 if (re == NULL)
    goto PCRE_EARLY_ERROR_RETURN;
    }
- /* Put in the magic number, and save the sizes, initial options, and character
+ /* Put in the magic number, and save the sizes, initial options, internal
- table pointer. NULL is used for the default character tables. The nullpad field
+ flags, and character table pointer. NULL is used for the default character
- is at the end; it's there to help in the case when a regex compiled on a system
+ tables. The nullpad field is at the end; it's there to help in the case when a
- with 4-byte pointers is run on another with 8-byte pointers. */
+ regex compiled on a system with 4-byte pointers is run on another with 8-byte
+ pointers. */