MAINTENANCE README FOR PCRE --------------------------- The files in the "maint" directory of the PCRE source contain data, scripts, and programs that are used for the maintenance of PCRE, but which do not form part of the PCRE distribution tarballs. This document describes these files and also contains some notes for maintainers. Its contents are: Files in the maint directory Updating to a new Unicode release Preparing for a PCRE release Making a PCRE release Long-term ideas (wish list) Files in the maint directory ---------------------------- ----------------- This file is now OBSOLETE and no longer used ---------------- Builducptable A Perl script that creates the contents of the ucptable.h file from two Unicode data files, which themselves are downloaded from the Unicode web site. Run this script in the "maint" directory. ----------------- This file is now OBSOLETE and no longer used ---------------- GenerateUtt.py A Python script to generate part of the pcre_tables.c file that contains Unicode script names in a long string with offsets, which is tedious to maintain by hand. ManyConfigTests A shell script that runs "configure, make, test" a number of times with different configuration settings. MultiStage2.py A Python script that generates the file pcre_ucd.c from three Unicode data tables, which are themselves downloaded from the Unicode web site. Run this script in the "maint" directory. The generated file contains the tables for a 2-stage lookup of Unicode properties. README This file. Unicode.tables The files in this directory, DerivedGeneralCategory.txt, Scripts.txt and UnicodeData.txt, were downloaded from the Unicode web site. They contain information about Unicode characters and scripts. ucptest.c A short C program for testing the Unicode property macros that do lookups in the pcre_ucd.c data, mainly useful after rebuilding the Unicode property table. Compile and run this in the "maint" directory (see comments at its head). ucptestdata A directory containing two files, testinput1 and testoutput1, to use in conjunction with the ucptest program. utf8.c A short, freestanding C program for converting a Unicode code point into a sequence of bytes in the UTF-8 encoding, and vice versa. If its argument is a hex number such as 0x1234, it outputs a list of the equivalent UTF-8 bytes. If its argument is sequence of concatenated UTF-8 bytes (e.g. e188b4) it treats them as a UTF-8 character and outputs the equivalent code point in hex. Updating to a new Unicode release --------------------------------- When there is a new release of Unicode, the files in Unicode.tables must be refreshed from the web site. If the new version of Unicode adds new character scripts, the source file ucp.h and both the MultiStage2.py and the GenerateUtt.py scripts must be edited to add the new names. Then MultiStage2.py can be run to generate a new version of pcre_ucd.c, and GenerateUtt.py can be run to generate the tricky tables for inclusion in pcre_tables.c. If MultiStage2.py gives the error "ValueError: list.index(x): x not in list", the cause is usually a missing (or misspelt) name in the list of scripts. I couldn't find a straightforward list of scripts on the Unicode site, but there's a useful Wikipedia page that list them, and notes the Unicode version in which they were introduced: http://en.wikipedia.org/wiki/Unicode_scripts#Table_of_Unicode_scripts The ucptest program can be compiled and used to check that the new tables in pcre_ucd.c work properly, using the data files in ucptestdata to check a number of test characters. The source file ucptest.c must be updated whenever new Unicode script names are added. Note also that both the pcresyntax.3 and pcrepattern.3 man pages contain lists of Unicode script names. Preparing for a PCRE release ---------------------------- This section contains a checklist of things that I consult before building a distribution for a new release. . Ensure that the version number and version date are correct in configure.ac. . If new build options have been added, ensure that they are added to the CMake files as well as to the autoconf files. . Run ./autogen.sh to ensure everything is up-to-date. . Compile and test with many different config options, and combinations of options. The maint/ManyConfigTests script now encapsulates this testing. . Run perltest.pl on the test data for tests 1, 4, 6, and 11. The first two can be run with Perl 5.8 or 5.10; the last two require Perl 5.10. The output should match the PCRE test output, apart from the version identification at the start of each test. The other tests are not Perl-compatible (they use various PCRE-specific features or options). . Test with valgrind by running "RunTest valgrind". There is also "RunGrepTest valgrind", though that takes quite a long time. . It may also useful to test with Electric Fence, though the fact that it grumbles for missing free() calls can be a nuisance. (A missing free() in pcretest is hardly a big problem.) To build with EF, use: LIBS='/usr/lib/libefence.a -lpthread' with ./configure. Then all normal runs use it to check for buffer overflow. Also run everything with: EF_PROTECT_BELOW=1 because there have been problems with lookbehinds that looked too far. . Test with the emulated memmove() function by undefining HAVE_MEMMOVE and HAVE_BCOPY in config.h. You may see a number of "pcre_memmove defined but not used" warnings for the modules in which there is no call to memmove(). These can be ignored. . Documentation: check AUTHORS, COPYING, ChangeLog (check version and date), INSTALL, LICENCE, NEWS (check version and date), NON-UNIX-USE, and README. Many of these won't need changing, but over the long term things do change. . Man pages: Check all man pages for \ not followed by e or f or " because that indicates a markup error. . When the release is built, test it on a number of different operating systems if possible, and using different compilers as well. For example, on Solaris it is helpful to test using Sun's cc compiler as a change from gcc. Adding -xarch=v9 to the cc options does a 64-bit test, but it also needs -S 64 for pcretest to increase the stack size for test 2. Making a PCRE release --------------------- Run PrepareRelease and commit the files that it changes (by removing trailing spaces). Then run "make distcheck" to create the tarballs and the zipball. Double-check with "svn status", then create an SVN tagged copy: svn copy svn://vcs.exim.org/pcre/code/trunk \ svn://vcs.exim.org/pcre/code/tags/pcre-8.xx Don't forget to update Freshmeat when the new release is out, and to tell webmaster@pcre.org and the mailing list. Future ideas (wish list) ------------------------ This section records a list of ideas so that they do not get forgotten. They vary enormously in their usefulness and potential for implementation. Some are very sensible; some are rather wacky. Some have been on this list for years; others are relatively new. . Optimization There are always ideas for new optimizations so as to speed up pattern matching. Most of them try to save work by recognizing a non-match without having to scan all the possibilities. These are some that I've recorded: * /((A{0,5}){0,5}){0,5}(something complex)/ on a non-matching string is very slow, though Perl is fast. Can we speed up somehow? Convert to {0,125}? OTOH, this is pathological - the user could easily fix it. * Turn ={4} into ==== ? (for speed). I once did an experiment, and it seems to have little effect, and maybe makes things worse. * "Ends with literal string" - note that a single character doesn't gain much over the existing "required byte" (reqbyte) feature that just remembers one byte. * These probably need to go in study(): o Remember an initial string rather than just 1 char? o A required byte from alternatives - not just the last char, but an earlier one if common to all alternatives. o Friedl contains other ideas. . If Perl gets to a consistent state over the settings of capturing sub- patterns inside repeats, see if we can match it. One example of the difference is the matching of /(main(O)?)+/ against mainOmain, where PCRE leaves $2 set. In Perl, it's unset. Changing this in PCRE will be very hard because I think it needs much more state to be remembered. . Perl 6 will be a revolution. Is it a revolution too far for PCRE? . Unicode * Note that in Perl, \s matches \pZ and similarly for \d, \w and the POSIX character classes. For the moment, I've chosen not to support this for backward compatibility, for speed, and because it would be messy to implement. * A different approach to Unicode might be to use a typedef to do everything in unsigned shorts instead of unsigned chars. Actually, we'd have to have a new typedef to distinguish data from bits of compiled pattern that are in bytes, I think. There would need to be conversion functions in and out. I don't think this is particularly trivial - and anyway, Unicode now has characters that need more than 16 bits, so is this at all sensible? * There has been a request for direct support of 16-bit characters and UTF-16. However, since Unicode is moving beyond purely 16-bit characters, is this worth it at all? One possible way of handling 16-bit characters would be to "load" them in the same way that UTF-8 characters are loaded. . Allow errorptr and erroroffset to be NULL. I don't like this idea. . Line endings: * Option to use NUL as a line terminator in subject strings. This could now be done relatively easily since the extension to support LF, CR, and CRLF. If it is done, a suitable option for pcregrep is also required. . Option to provide the pattern with a length instead of with a NUL terminator. This affects quite a few places in the code and is not trivial. . Catch SIGSEGV for stack overflows? . A feature to suspend a match via a callout was once requested. . Option to convert results into character offsets and character lengths. . Option for pcregrep to scan only the start of a file. I am not keen - this is the job of "head". . A (non-Unix) user wanted pcregrep options to (a) list a file name just once, preceded by a blank line, instead of adding it to every matched line, and (b) support --outputfile=name. . Consider making UTF-8 and UCP the default for PCRE n.0 for some n > 8. . Add a user pointer to pcre_malloc/free functions -- some option would be needed to retain backward compatibility. . Define a union for the results from pcre_fullinfo(). . Provide a "random access to the subject" facility so that the way in which it is stored is independent of PCRE. For efficiency, it probably isn't possible to switch this dynamically. It would have to be specified when PCRE was compiled. PCRE would then call a function every time it wanted a character. . Wild thought: the ability to compile from PCRE's internal byte code to a real FSM and a very fast (third) matcher to process the result. There would be even more restrictions than for pcre_dfa_exec(), however. This is not easy. . Should pcretest have some private locale data, to avoid relying on the available locales for the test data, since different OS have different ideas? This won't be as thorough a test, but perhaps that doesn't really matter. . pcregrep: add -rs for a sorted recurse? Having to store file names and sort them will of course slow it down. . Someone suggested --disable-callout to save code space when callouts are never wanted. This seems rather marginal. . Check names that consist entirely of digits: PCRE allows, but do Perl and Python, etc? . A user suggested a parameter to limit the length of string matched, for example if the parameter is N, the current match should fail if the matched substring exceeds N. This could apply to both match functions. The value could be a new field in the extra block. . Callouts with arguments: (?Cn:ARG) for instance. . A user is going to supply a patch to generalize the API for user-specific memory allocation so that it is more flexible in threaded environments. Thiw was promised a long time ago, and never appeared... . Write a function that generates random matching strings for a compiled regex. . Write a wrapper to maintain a structure with specified runtime parameters, such as recurse limit, and pass these to PCRE each time it is called. Also maybe malloc and free. A user sent a prototype. . Pcregrep: an option to specify the output line separator, either as a string or select from a fixed list. This is not dead easy, because at the moment it outputs whatever is in the input file. . Improve the code for duplicate checking in pcre_dfa_exec(). An incomplete, non-thread-safe patch showed that this can help performance for patterns where there are many alternatives. However, a simple thread-safe implementation that I tried made things worse in many simple cases, so this is not an obviously good thing. . Make the longest lookbehind available via pcre_fullinfo(). This is not straightforward because lookbehinds can be nested inside lookbehinds. This case will have to be identified, and the amounts added. This should then give the maximum possible lookbehind length. The reason for wanting this is to help when implementing multi-segment matching using pcre_exec() with partial matching and overlapping segments. . PCRE cannot at present distinguish between subpatterns with different names, but the same number (created by the use of ?|). In order to do so, a way of remembering *which* subpattern numbered n matched is needed. Bugzilla #760. Philip Hazel Email local part: ph10 Email domain: cam.ac.uk Last updated: 26 September 2009