Contents of /code/trunk/maint/ManyConfigTests

#! /bin/sh

# This is a script for the use of PCRE maintainers. It configures and rebuilds
# PCRE with a variety of configuration options, and in each case runs the tests
# to ensure that all goes well. Every possible combination would take far too
# long, so we use a representative sample. This script should be run in the
# PCRE source directory.

# Some of the tests have to be skipped when PCRE is built with non-Unix newline
# recognition. I am planning to reduce this as much as possible in due course.


# This is in case the caller has set aliases (as I do - PH)

unset cp ls mv rm

# Use -v to make the output more verbose

verbose=0
if [ "$1" = "-v" ] ; then verbose=1; fi

# This is a temporary directory for testing out-of-line builds

tmp=/tmp/pcretesting


# This function runs a single test with the set of configuration options that
# are in $opts. The source directory must be set in srcdir.

function runtest()
  {
  rm -f *_unittest

  if [ "$opts" = "" ] ; then
    echo "Configuring with: default settings"
  else
    olen=`expr length "$opts"`
    if [ $olen -gt 53 ] ; then
      echo "Configuring with:"
      echo "  $opts"
    else
      echo "Configuring with: $opts"
    fi
  fi

  $srcdir/configure $opts >/dev/null 2>teststderr
  if [ $? -ne 0 ]; then
    echo " "
    echo "**** Error while configuring ****"
    cat teststderr
    exit 1
  fi

  echo "Making"
  make >/dev/null 2>teststderr
  if [ $? -ne 0 ]; then
    echo " "
    echo "**** Error while making ****"
    cat teststderr
    exit 1
  fi

  if [ $verbose -eq 1 ]; then
    ./pcretest -C
  fi

  conf=`./pcretest -C`
  nl=`expr match "$conf" ".*Newline sequence is \([A-Z]*\)"`

  if [ "$nl" = "LF" -o "$nl" = "ANY" ]; then
    echo "Running C library tests"
    $srcdir/RunTest >teststdout
    if [ $? -ne 0 ]; then
      echo " "
      echo "**** Test failed ****"
      cat teststdout
      exit 1
    fi
  else
    echo "Skipping C library tests: newline is $nl"
  fi

  if [ "$nl" = "LF" ]; then
    echo "Running pcregrep tests"
    $srcdir/RunGrepTest >teststdout 2>teststderr
    if [ $? -ne 0 ]; then
      echo " "
      echo "**** Test failed ****"
      cat teststderr
      cat teststdout
      exit 1
    fi
  else
    echo "Skipping pcregrep tests: newline is $nl"
  fi

  if [ "$nl" = "LF" -o "$nl" = "ANY" ]; then
    if [ -f pcrecpp_unittest ] ; then
      for utest in pcrecpp_unittest \
                   pcre_scanner_unittest \
                   pcre_stringpiece_unittest
      do
        echo "Running $utest"
        $utest >teststdout
        if [ $? -ne 0 ]; then
          echo " "
          echo "**** Test failed ****"
          cat teststdout
          exit 1
        fi
      done
    else
      echo "Skipping C++ tests: pcrecpp_unittest does not exist"    
    fi
  else
    echo "Skipping C++ tests: newline is $nl"
  fi
  }


# This set of tests builds PCRE and runs the tests with a variety of configure
# options, in the current (source) directory. The first (empty) configuration
# builds with all the default settings. As well as testing that these options
# work, we use --disable-shared or --disable-static after the first test (which
# builds both) to save a bit of time by building only one version of the
# library for the subsequent tests.

echo "Tests in the current directory"
srcdir=.
for opts in \
  "" \
  "--enable-utf8 --disable-static" \
  "--enable-unicode-properties --disable-shared" \
  "--enable-unicode-properties --disable-stack-for-recursion --disable-shared" \
  "--enable-unicode-properties --disable-cpp --with-link-size=3 --disable-shared" \
  "--enable-rebuild-chartables --disable-shared" \
  "--enable-newline-is-any --disable-shared" \
  "--enable-newline-is-cr --disable-shared" \
  "--enable-newline-is-crlf --disable-shared" \
  "--enable-newline-is-anycrlf --disable-shared" \
  "--enable-utf8 --enable-newline-is-any --enable-unicode-properties --disable-stack-for-recursion --disable-static --disable-cpp"
do
  runtest
done


# Clean up the distribution and then do at least one build and test in a
# directory other than the source directory. It doesn't work unless the
# source directory is cleaned up first - and anyway, it's best to leave it
# in a clean state after all this reconfiguring.

if [ -f Makefile ]; then
  echo "Running 'make distclean'"
  make distclean >/dev/null 2>&1
  if [ $? -ne 0 ]; then
    echo "** 'make distclean' failed"
    exit 1
  fi    
fi   

echo "Tests in the $tmp directory"
srcdir=`pwd`
export srcdir

if [ ! -e $tmp ]; then
  mkdir $tmp
fi

if [ ! -d $tmp ]; then
  echo "** Failed to create $tmp or it is not a directory"
  exit 1
fi

cd $tmp
if [ $? -ne 0 ]; then
  echo "** Failed to cd to $tmp"
  exit 1
fi    

for opts in \
  "--enable-unicode-properties --disable-shared"
do
  runtest
done

echo "Removing $tmp"

rm -rf $tmp

echo "All done"

# End
1	#! /bin/sh
2
3	# This is a script for the use of PCRE maintainers. It configures and rebuilds
4	# PCRE with a variety of configuration options, and in each case runs the tests
5	# to ensure that all goes well. Every possible combination would take far too
6	# long, so we use a representative sample. This script should be run in the
7	# PCRE source directory.
8
9	# Some of the tests have to be skipped when PCRE is built with non-Unix newline
10	# recognition. I am planning to reduce this as much as possible in due course.
11
12
13	# This is in case the caller has set aliases (as I do - PH)
14
15	unset cp ls mv rm
16
17	# Use -v to make the output more verbose
18
19	verbose=0
20	if [ "$1" = "-v" ] ; then verbose=1; fi
21
22	# This is a temporary directory for testing out-of-line builds
23
24	tmp=/tmp/pcretesting
25
26
27	# This function runs a single test with the set of configuration options that
28	# are in $opts. The source directory must be set in srcdir.
29
30	function runtest()
31	{
32	rm -f *_unittest
33
34	if [ "$opts" = "" ] ; then
35	echo "Configuring with: default settings"
36	else
37	olen=`expr length "$opts"`
38	if [ $olen -gt 53 ] ; then
39	echo "Configuring with:"
40	echo " $opts"
41	else
42	echo "Configuring with: $opts"
43	fi
44	fi
45
46	$srcdir/configure $opts >/dev/null 2>teststderr
47	if [ $? -ne 0 ]; then
48	echo " "
49	echo "** Error while configuring **"
50	cat teststderr
51	exit 1
52	fi
53
54	echo "Making"
55	make >/dev/null 2>teststderr
56	if [ $? -ne 0 ]; then
57	echo " "
58	echo "** Error while making **"
59	cat teststderr
60	exit 1
61	fi
62
63	if [ $verbose -eq 1 ]; then
64	./pcretest -C
65	fi
66
67	conf=`./pcretest -C`
68	nl=`expr match "$conf" ".Newline sequence is \([A-Z]\)"`
69
70	if [ "$nl" = "LF" -o "$nl" = "ANY" ]; then
71	echo "Running C library tests"
72	$srcdir/RunTest >teststdout
73	if [ $? -ne 0 ]; then
74	echo " "
75	echo "** Test failed **"
76	cat teststdout
77	exit 1
78	fi
79	else
80	echo "Skipping C library tests: newline is $nl"
81	fi
82
83	if [ "$nl" = "LF" ]; then
84	echo "Running pcregrep tests"
85	$srcdir/RunGrepTest >teststdout 2>teststderr
86	if [ $? -ne 0 ]; then
87	echo " "
88	echo "** Test failed **"
89	cat teststderr
90	cat teststdout
91	exit 1
92	fi
93	else
94	echo "Skipping pcregrep tests: newline is $nl"
95	fi
96
97	if [ "$nl" = "LF" -o "$nl" = "ANY" ]; then
98	if [ -f pcrecpp_unittest ] ; then
99	for utest in pcrecpp_unittest \
100	pcre_scanner_unittest \
101	pcre_stringpiece_unittest
102	do
103	echo "Running $utest"
104	$utest >teststdout
105	if [ $? -ne 0 ]; then
106	echo " "
107	echo "** Test failed **"
108	cat teststdout
109	exit 1
110	fi
111	done
112	else
113	echo "Skipping C++ tests: pcrecpp_unittest does not exist"
114	fi
115	else
116	echo "Skipping C++ tests: newline is $nl"
117	fi
118	}
119
120
121	# This set of tests builds PCRE and runs the tests with a variety of configure
122	# options, in the current (source) directory. The first (empty) configuration
123	# builds with all the default settings. As well as testing that these options
124	# work, we use --disable-shared or --disable-static after the first test (which
125	# builds both) to save a bit of time by building only one version of the
126	# library for the subsequent tests.
127
128	echo "Tests in the current directory"
129	srcdir=.
130	for opts in \
131	"" \
132	"--enable-utf8 --disable-static" \
133	"--enable-unicode-properties --disable-shared" \
134	"--enable-unicode-properties --disable-stack-for-recursion --disable-shared" \
135	"--enable-unicode-properties --disable-cpp --with-link-size=3 --disable-shared" \
136	"--enable-rebuild-chartables --disable-shared" \
137	"--enable-newline-is-any --disable-shared" \
138	"--enable-newline-is-cr --disable-shared" \
139	"--enable-newline-is-crlf --disable-shared" \
140	"--enable-newline-is-anycrlf --disable-shared" \
141	"--enable-utf8 --enable-newline-is-any --enable-unicode-properties --disable-stack-for-recursion --disable-static --disable-cpp"
142	do
143	runtest
144	done
145
146
147	# Clean up the distribution and then do at least one build and test in a
148	# directory other than the source directory. It doesn't work unless the
149	# source directory is cleaned up first - and anyway, it's best to leave it
150	# in a clean state after all this reconfiguring.
151
152	if [ -f Makefile ]; then
153	echo "Running 'make distclean'"
154	make distclean >/dev/null 2>&1
155	if [ $? -ne 0 ]; then
156	echo "** 'make distclean' failed"
157	exit 1
158	fi
159	fi
160
161	echo "Tests in the $tmp directory"
162	srcdir=`pwd`
163	export srcdir
164
165	if [ ! -e $tmp ]; then
166	mkdir $tmp
167	fi
168
169	if [ ! -d $tmp ]; then
170	echo "** Failed to create $tmp or it is not a directory"
171	exit 1
172	fi
173
174	cd $tmp
175	if [ $? -ne 0 ]; then
176	echo "** Failed to cd to $tmp"
177	exit 1
178	fi
179
180	for opts in \
181	"--enable-unicode-properties --disable-shared"
182	do
183	runtest
184	done
185
186	echo "Removing $tmp"
187
188	rm -rf $tmp
189
190	echo "All done"
191
192	# End