/[pcre]/code/trunk/maint/ManyConfigTests
ViewVC logotype

Contents of /code/trunk/maint/ManyConfigTests

Parent Directory Parent Directory | Revision Log Revision Log


Revision 149 - (hide annotations) (download)
Mon Apr 16 15:28:08 2007 UTC (7 years, 6 months ago) by ph10
File size: 4868 byte(s)
Add PCRE_NEWLINE_ANYCRLF.

1 ph10 129 #! /bin/sh
2    
3     # This is a script for the use of PCRE maintainers. It configures and rebuilds
4     # PCRE with a variety of configuration options, and in each case runs the tests
5     # to ensure that all goes well. Every possible combination would take far too
6 ph10 139 # long, so we use a representative sample. This script should be run in the
7     # PCRE source directory.
8 ph10 129
9     # Some of the tests have to be skipped when PCRE is built with non-Unix newline
10     # recognition. I am planning to reduce this as much as possible in due course.
11    
12 ph10 139
13 ph10 129 # This is in case the caller has set aliases (as I do - PH)
14    
15     unset cp ls mv rm
16    
17     # Use -v to make the output more verbose
18    
19     verbose=0
20     if [ "$1" = "-v" ] ; then verbose=1; fi
21    
22 ph10 139 # This is a temporary directory for testing out-of-line builds
23 ph10 129
24 ph10 139 tmp=/tmp/pcretesting
25    
26    
27     # This function runs a single test with the set of configuration options that
28     # are in $opts. The source directory must be set in srcdir.
29    
30     function runtest()
31     {
32 ph10 129 rm -f *_unittest
33    
34     if [ "$opts" = "" ] ; then
35 ph10 139 echo "Configuring with: default settings"
36 ph10 129 else
37     olen=`expr length "$opts"`
38 ph10 139 if [ $olen -gt 53 ] ; then
39     echo "Configuring with:"
40     echo " $opts"
41 ph10 129 else
42 ph10 139 echo "Configuring with: $opts"
43 ph10 129 fi
44     fi
45    
46 ph10 139 $srcdir/configure $opts >/dev/null 2>teststderr
47 ph10 129 if [ $? -ne 0 ]; then
48     echo " "
49     echo "**** Error while configuring ****"
50     cat teststderr
51     exit 1
52     fi
53    
54 ph10 139 echo "Making"
55 ph10 129 make >/dev/null 2>teststderr
56     if [ $? -ne 0 ]; then
57     echo " "
58     echo "**** Error while making ****"
59     cat teststderr
60     exit 1
61     fi
62    
63     if [ $verbose -eq 1 ]; then
64     ./pcretest -C
65     fi
66    
67     conf=`./pcretest -C`
68     nl=`expr match "$conf" ".*Newline sequence is \([A-Z]*\)"`
69    
70     if [ "$nl" = "LF" -o "$nl" = "ANY" ]; then
71 ph10 139 echo "Running C library tests"
72     $srcdir/RunTest >teststdout
73 ph10 129 if [ $? -ne 0 ]; then
74     echo " "
75     echo "**** Test failed ****"
76     cat teststdout
77     exit 1
78     fi
79     else
80 ph10 139 echo "Skipping C library tests: newline is $nl"
81 ph10 129 fi
82    
83     if [ "$nl" = "LF" ]; then
84 ph10 139 echo "Running pcregrep tests"
85     $srcdir/RunGrepTest >teststdout 2>teststderr
86 ph10 129 if [ $? -ne 0 ]; then
87     echo " "
88     echo "**** Test failed ****"
89     cat teststderr
90     cat teststdout
91     exit 1
92     fi
93     else
94 ph10 139 echo "Skipping pcregrep tests: newline is $nl"
95 ph10 129 fi
96    
97     if [ "$nl" = "LF" -o "$nl" = "ANY" ]; then
98     if [ -f pcrecpp_unittest ] ; then
99     for utest in pcrecpp_unittest \
100     pcre_scanner_unittest \
101     pcre_stringpiece_unittest
102     do
103 ph10 139 echo "Running $utest"
104 ph10 129 $utest >teststdout
105     if [ $? -ne 0 ]; then
106     echo " "
107     echo "**** Test failed ****"
108     cat teststdout
109     exit 1
110     fi
111     done
112 ph10 139 else
113     echo "Skipping C++ tests: pcrecpp_unittest does not exist"
114 ph10 129 fi
115     else
116 ph10 139 echo "Skipping C++ tests: newline is $nl"
117 ph10 129 fi
118 ph10 139 }
119 ph10 129
120 ph10 139
121     # This set of tests builds PCRE and runs the tests with a variety of configure
122     # options, in the current (source) directory. The first (empty) configuration
123     # builds with all the default settings. As well as testing that these options
124     # work, we use --disable-shared or --disable-static after the first test (which
125     # builds both) to save a bit of time by building only one version of the
126     # library for the subsequent tests.
127    
128     echo "Tests in the current directory"
129     srcdir=.
130     for opts in \
131     "" \
132     "--enable-utf8 --disable-static" \
133     "--enable-unicode-properties --disable-shared" \
134     "--enable-unicode-properties --disable-stack-for-recursion --disable-shared" \
135     "--enable-unicode-properties --disable-cpp --with-link-size=3 --disable-shared" \
136     "--enable-rebuild-chartables --disable-shared" \
137     "--enable-newline-is-any --disable-shared" \
138     "--enable-newline-is-cr --disable-shared" \
139     "--enable-newline-is-crlf --disable-shared" \
140 ph10 149 "--enable-newline-is-anycrlf --disable-shared" \
141 ph10 139 "--enable-utf8 --enable-newline-is-any --enable-unicode-properties --disable-stack-for-recursion --disable-static --disable-cpp"
142     do
143     runtest
144 ph10 129 done
145    
146 ph10 139
147     # Clean up the distribution and then do at least one build and test in a
148     # directory other than the source directory. It doesn't work unless the
149     # source directory is cleaned up first - and anyway, it's best to leave it
150     # in a clean state after all this reconfiguring.
151    
152     if [ -f Makefile ]; then
153     echo "Running 'make distclean'"
154     make distclean >/dev/null 2>&1
155     if [ $? -ne 0 ]; then
156     echo "** 'make distclean' failed"
157     exit 1
158     fi
159     fi
160    
161     echo "Tests in the $tmp directory"
162     srcdir=`pwd`
163     export srcdir
164    
165     if [ ! -e $tmp ]; then
166     mkdir $tmp
167     fi
168    
169     if [ ! -d $tmp ]; then
170     echo "** Failed to create $tmp or it is not a directory"
171     exit 1
172     fi
173    
174     cd $tmp
175     if [ $? -ne 0 ]; then
176     echo "** Failed to cd to $tmp"
177     exit 1
178     fi
179    
180     for opts in \
181     "--enable-unicode-properties --disable-shared"
182     do
183     runtest
184     done
185    
186     echo "Removing $tmp"
187    
188     rm -rf $tmp
189    
190     echo "All done"
191    
192 ph10 129 # End

Properties

Name Value
svn:executable *

webmaster@exim.org
ViewVC Help
Powered by ViewVC 1.1.12