/[pcre]/code/trunk/doc/pcrepattern.3

Diff of /code/trunk/doc/pcrepattern.3

Parent Directory | Revision Log | View Patch Patch

-revision 168 by ph10,
Tue May 29 15:18:18 2007 UTC
+revision 259 by ph10,
Wed Sep 19 09:52:44 2007 UTC
 Line 4 
 PCRE - Perl-compatible regular expressio
  .SH "PCRE REGULAR EXPRESSION DETAILS"
  .rs
  .sp
- The syntax and semantics of the regular expressions supported by PCRE are
+ The syntax and semantics of the regular expressions that are supported by PCRE
- described below. Regular expressions are also described in the Perl
+ are described in detail below. There is a quick-reference syntax summary in the
- documentation and in a number of books, some of which have copious examples.
+ .\" HREF
- Jeffrey Friedl's "Mastering Regular Expressions", published by O'Reilly, covers
+ \fBpcresyntax\fP
- regular expressions in great detail. This description of PCRE's regular
+ .\"
- expressions is intended as reference material.
+ page. Perl's regular expressions are described in its own documentation, and
+ regular expressions in general are covered in a number of books, some of which
+ have copious examples. Jeffrey Friedl's "Mastering Regular Expressions",
+ published by O'Reilly, covers regular expressions in great detail. This
+ description of PCRE's regular expressions is intended as reference material.
  .P
  The original operation of PCRE was on strings of one-byte characters. However,
  there is now also support for UTF-8 character strings. To use this, you must
-Line 30 
 The remainder of this document discusses
+Line 34 
 The remainder of this document discusses
  PCRE when its main matching function, \fBpcre_exec()\fP, is used.
  From release 6.0, PCRE offers a second matching function,
  \fBpcre_dfa_exec()\fP, which matches using a different algorithm that is not
  Perl-compatible. Some of the features discussed below are not available when
  \fBpcre_dfa_exec()\fP is used. The advantages and disadvantages of the
  alternative function, and how it differs from the normal function, are
  discussed in the
-Line 40 
 discussed in the
+Line 44 
 discussed in the
  page.
  .
  .
+ .SH "NEWLINE CONVENTIONS"
+ .rs
+ .sp
+ PCRE supports five different conventions for indicating line breaks in
+ strings: a single CR (carriage return) character, a single LF (linefeed)
+ character, the two-character sequence CRLF, any of the three preceding, or any
+ Unicode newline sequence. The
+ .\" HREF
+ \fBpcreapi\fP
+ .\"
+ page has
+ .\" HTML <a href="pcreapi.html#newlines">
+ .\" </a>
+ further discussion
+ .\"
+ about newlines, and shows how to set the newline convention in the
+ \fIoptions\fP arguments for the compiling and matching functions.
+ .P
+ It is also possible to specify a newline convention by starting a pattern
+ string with one of the following five sequences:
+ .sp
+   (*CR)        carriage return
+   (*LF)        linefeed
+   (*CRLF)      carriage return, followed by linefeed
+   (*ANYCRLF)   any of the three above
+   (*ANY)       all Unicode newline sequences
+ .sp
+ These override the default and the options given to \fBpcre_compile()\fP. For
+ example, on a Unix system where LF is the default newline sequence, the pattern
+ .sp
+   (*CR)a.b
+ .sp
+ changes the convention to CR. That pattern matches "a\enb" because LF is no
+ longer a newline. Note that these special settings, which are not
+ Perl-compatible, are recognized only at the very start of a pattern, and that
+ they must be in upper case. If more than one of them is present, the last one
+ is used.
+ .P
+ The newline convention does not affect what the \eR escape sequence matches. By
+ default, this is any Unicode newline sequence, for Perl compatibility. However,
+ this can be changed; see the description of \eR in the section entitled
+ .\" HTML <a href="#newlineseq">
+ .\" </a>
+ "Newline sequences"
+ .\"
+ below. A change of \eR setting can be combined with a change of newline
+ convention.
+ .
+ .
  .SH "CHARACTERS AND METACHARACTERS"
  .rs
  .sp
-Line 149 
 represents:
+Line 202 
 represents:
    \ecx       "control-x", where x is any character
    \ee        escape (hex 1B)
    \ef        formfeed (hex 0C)
-   \en        newline (hex 0A)
+   \en        linefeed (hex 0A)
    \er        carriage return (hex 0D)
    \et        tab (hex 09)
    \eddd      character with octal code ddd, or backreference
-Line 164 
 Thus \ecz becomes hex 1A, but \ec{ becom
+Line 217 
 Thus \ecz becomes hex 1A, but \ec{ becom
  After \ex, from zero to two hexadecimal digits are read (letters can be in
  upper or lower case). Any number of hexadecimal digits may appear between \ex{
  and }, but the value of the character code must be less than 256 in non-UTF-8
- mode, and less than 2**31 in UTF-8 mode (that is, the maximum hexadecimal value
+ mode, and less than 2**31 in UTF-8 mode. That is, the maximum value in
- is 7FFFFFFF). If characters other than hexadecimal digits appear between \ex{
+ hexadecimal is 7FFFFFFF. Note that this is bigger than the largest Unicode code
- and }, or if there is no terminating }, this form of escape is not recognized.
+ point, which is 10FFFF.
- Instead, the initial \ex will be interpreted as a basic hexadecimal escape,
+ .P
- with no following digits, giving a character whose value is zero.
+ If characters other than hexadecimal digits appear between \ex{ and }, or if
+ there is no terminating }, this form of escape is not recognized. Instead, the
+ initial \ex will be interpreted as a basic hexadecimal escape, with no
+ following digits, giving a character whose value is zero.
  .P
  Characters whose value is less than 256 can be defined by either of the two
  syntaxes for \ex. There is no difference in the way they are handled. For
-Line 240 
 meanings
+Line 296 
 meanings
  .SS "Absolute and relative back references"
  .rs
  .sp
- The sequence \eg followed by a positive or negative number, optionally enclosed
+ The sequence \eg followed by an unsigned or a negative number, optionally
- in braces, is an absolute or relative back reference. Back references are
+ enclosed in braces, is an absolute or relative back reference. A named back
- discussed
+ reference can be coded as \eg{name}. Back references are discussed
  .\" HTML <a href="#backreferences">
  .\" </a>
  later,
-Line 262 
 following are always recognized:
+Line 318 
 following are always recognized:
  .sp
    \ed     any decimal digit
    \eD     any character that is not a decimal digit
+   \eh     any horizontal whitespace character
+   \eH     any character that is not a horizontal whitespace character
    \es     any whitespace character
    \eS     any character that is not a whitespace character
+   \ev     any vertical whitespace character
+   \eV     any character that is not a vertical whitespace character
    \ew     any "word" character
    \eW     any "non-word" character
  .sp
-Line 277 
 there is no character to match.
+Line 337 
 there is no character to match.
  .P
  For compatibility with Perl, \es does not match the VT character (code 11).
  This makes it different from the the POSIX "space" class. The \es characters
- are HT (9), LF (10), FF (12), CR (13), and space (32). (If "use locale;" is
+ are HT (9), LF (10), FF (12), CR (13), and space (32). If "use locale;" is
  included in a Perl script, \es may match the VT character. In PCRE, it never
- does.)
+ does.
+ .P
+ In UTF-8 mode, characters with values greater than 128 never match \ed, \es, or
+ \ew, and always match \eD, \eS, and \eW. This is true even when Unicode
+ character property support is available. These sequences retain their original
+ meanings from before UTF-8 support was available, mainly for efficiency
+ reasons.
+ .P
+ The sequences \eh, \eH, \ev, and \eV are Perl 5.10 features. In contrast to the
+ other sequences, these do match certain high-valued codepoints in UTF-8 mode.
+ The horizontal space characters are:
+ .sp
+   U+0009     Horizontal tab
+   U+0020     Space
+   U+00A0     Non-break space
+   U+1680     Ogham space mark
+   U+180E     Mongolian vowel separator
+   U+2000     En quad
+   U+2001     Em quad
+   U+2002     En space
+   U+2003     Em space
+   U+2004     Three-per-em space
+   U+2005     Four-per-em space
+   U+2006     Six-per-em space
+   U+2007     Figure space
+   U+2008     Punctuation space
+   U+2009     Thin space
+   U+200A     Hair space
+   U+202F     Narrow no-break space
+   U+205F     Medium mathematical space
+   U+3000     Ideographic space
+ .sp
+ The vertical space characters are:
+ .sp
+   U+000A     Linefeed
+   U+000B     Vertical tab
+   U+000C     Formfeed
+   U+000D     Carriage return
+   U+0085     Next line
+   U+2028     Line separator
+   U+2029     Paragraph separator
  .P
  A "word" character is an underscore or any character less than 256 that is a
  letter or digit. The definition of letters and digits is controlled by PCRE's
-Line 295 
 in the
+Line 395 
 in the
  .\"
  page). For example, in a French locale such as "fr_FR" in Unix-like systems,
  or "french" in Windows, some character codes greater than 128 are used for
- accented letters, and these are matched by \ew.
+ accented letters, and these are matched by \ew. The use of locales with Unicode
- .P
+ is discouraged.
- In UTF-8 mode, characters with values greater than 128 never match \ed, \es, or
- \ew, and always match \eD, \eS, and \eW. This is true even when Unicode
- character property support is available. The use of locales with Unicode is
- discouraged.
  .
  .
+ .\" HTML <a name="newlineseq"></a>
  .SS "Newline sequences"
  .rs
  .sp
- Outside a character class, the escape sequence \eR matches any Unicode newline
+ Outside a character class, by default, the escape sequence \eR matches any
- sequence. This is an extension to Perl. In non-UTF-8 mode \eR is equivalent to
+ Unicode newline sequence. This is a Perl 5.10 feature. In non-UTF-8 mode \eR is
- the following:
+ equivalent to the following:
  .sp
    (?>\er\en|\en|\ex0b|\ef|\er|\ex85)
  .sp
-Line 328 
 are added: LS (line separator, U+2028) a
+Line 425 
 are added: LS (line separator, U+2028) a
  Unicode character property support is not needed for these characters to be
  recognized.
  .P
+ It is possible to restrict \eR to match only CR, LF, or CRLF (instead of the
+ complete set of Unicode line endings) by setting the option PCRE_BSR_ANYCRLF
+ either at compile time or when the pattern is matched. (BSR is an abbrevation
+ for "backslash R".) This can be made the default when PCRE is built; if this is
+ the case, the other behaviour can be requested via the PCRE_BSR_UNICODE option.
+ It is also possible to specify these settings by starting a pattern string with
+ one of the following sequences:
+ .sp
+   (*BSR_ANYCRLF)   CR, LF, or CRLF only
+   (*BSR_UNICODE)   any Unicode newline sequence
+ .sp
+ These override the default and the options given to \fBpcre_compile()\fP, but
+ they can be overridden by options given to \fBpcre_exec()\fP. Note that these
+ special settings, which are not Perl-compatible, are recognized only at the
+ very start of a pattern, and that they must be in upper case. If more than one
+ of them is present, the last one is used. They can be combined with a change of
+ newline convention, for example, a pattern can start with:
+ .sp
+   (*ANY)(*BSR_ANYCRLF)
+ .sp
  Inside a character class, \eR matches the letter "R".
  .
  .
-Line 336 
 Inside a character class, \eR matches th
+Line 453 
 Inside a character class, \eR matches th
  .rs
  .sp
  When PCRE is built with Unicode character property support, three additional
- escape sequences to match character properties are available when UTF-8 mode
+ escape sequences that match characters with specific properties are available.
- is selected. They are:
+ When not in UTF-8 mode, these sequences are of course limited to testing
+ characters whose codepoints are less than 256, but they do work in this mode.
+ The extra escape sequences are:
  .sp
    \ep{\fIxx\fP}   a character with the \fIxx\fP property
    \eP{\fIxx\fP}   a character without the \fIxx\fP property
-Line 489 
 The special property L& is also supporte
+Line 608 
 The special property L& is also supporte
  the Lu, Ll, or Lt property, in other words, a letter that is not classified as
  a modifier or "other".
  .P
+ The Cs (Surrogate) property applies only to characters in the range U+D800 to
+ U+DFFF. Such characters are not valid in UTF-8 strings (see RFC 3629) and so
+ cannot be tested by PCRE, unless UTF-8 validity checking has been turned off
+ (see the discussion of PCRE_NO_UTF8_CHECK in the
+ .\" HREF
+ \fBpcreapi\fP
+ .\"
+ page).
+ .P
  The long synonyms for these properties that Perl supports (such as \ep{Letter})
  are not supported by PCRE, nor is it permitted to prefix any of these
  properties with "Is".
-Line 513 
 atomic group
+Line 641 
 atomic group
  (see below).
  .\"
  Characters with the "mark" property are typically accents that affect the
- preceding character.
+ preceding character. None of them have codepoints less than 256, so in
+ non-UTF-8 mode \eX matches any one character.
  .P
  Matching characters by Unicode property is not fast, because PCRE has to search
  a structure that contains data for over fifteen thousand characters. That is
-Line 525 
 properties in PCRE.
+Line 654 
 properties in PCRE.
  .SS "Resetting the match start"
  .rs
  .sp
  The escape sequence \eK, which is a Perl 5.10 feature, causes any previously
  matched characters not to be included in the final matched sequence. For
  example, the pattern:
  .sp
    foo\eKbar
  .sp
  matches "foobar", but reports that it has matched "bar". This feature is
  similar to a lookbehind assertion
  .\" HTML <a href="#lookbehind">
  .\" </a>
  (described below).
  .\"
  However, in this case, the part of the subject before the real match does not
  have to be of fixed length, as lookbehind assertions do. The use of \eK does
  not interfere with the setting of
  .\" HTML <a href="#subpattern">
  .\" </a>
  captured substrings.
  .\"
  For example, when the pattern
  .sp
    (foo)\eKbar
  .sp
  matches "foobar", the first substring is still set to "foo".
  .
  .
  .\" HTML <a name="smallassertions"></a>
-Line 863 
 alternative in the subpattern.
+Line 992 
 alternative in the subpattern.
  .rs
  .sp
  The settings of the PCRE_CASELESS, PCRE_MULTILINE, PCRE_DOTALL, and
- PCRE_EXTENDED options can be changed from within the pattern by a sequence of
+ PCRE_EXTENDED options (which are Perl-compatible) can be changed from within
- Perl option letters enclosed between "(?" and ")". The option letters are
+ the pattern by a sequence of Perl option letters enclosed between "(?" and ")".
+ The option letters are
  .sp
    i  for PCRE_CASELESS
    m  for PCRE_MULTILINE
-Line 878 
 PCRE_MULTILINE while unsetting PCRE_DOTA
+Line 1008 
 PCRE_MULTILINE while unsetting PCRE_DOTA
  permitted. If a letter appears both before and after the hyphen, the option is
  unset.
  .P
+ The PCRE-specific options PCRE_DUPNAMES, PCRE_UNGREEDY, and PCRE_EXTRA can be
+ changed in the same way as the Perl-compatible options by using the characters
+ J, U and X respectively.
+ .P
  When an option change occurs at top level (that is, not inside subpattern
  parentheses), the change applies to the remainder of the pattern that follows.
  If the change is placed right at the start of a pattern, PCRE extracts it into
-Line 901 
 branch is abandoned before the option se
+Line 1035 
 branch is abandoned before the option se
  option settings happen at compile time. There would be some very weird
  behaviour otherwise.
  .P
- The PCRE-specific options PCRE_DUPNAMES, PCRE_UNGREEDY, and PCRE_EXTRA can be
+ \fBNote:\fP There are other PCRE-specific options that can be set by the
- changed in the same way as the Perl-compatible options by using the characters
+ application when the compile or match functions are called. In some cases the
- J, U and X respectively.
+ pattern can contain special leading sequences to override what the application
+ has set or what has been defaulted. Details are given in the section entitled
+ .\" HTML <a href="#newlineseq">
+ .\" </a>
+ "Newline sequences"
+ .\"
+ above.
  .
  .
  .\" HTML <a name="subpattern"></a>
-Line 958 
 is reached, an option setting in one bra
+Line 1098 
 is reached, an option setting in one bra
  the above patterns match "SUNDAY" as well as "Saturday".
  .
  .
+ .SH "DUPLICATE SUBPATTERN NUMBERS"
+ .rs
+ .sp
+ Perl 5.10 introduced a feature whereby each alternative in a subpattern uses
+ the same numbers for its capturing parentheses. Such a subpattern starts with
+ (?| and is itself a non-capturing subpattern. For example, consider this
+ pattern:
+ .sp
+   (?|(Sat)ur|(Sun))day
+ .sp
+ Because the two alternatives are inside a (?| group, both sets of capturing
+ parentheses are numbered one. Thus, when the pattern matches, you can look
+ at captured substring number one, whichever alternative matched. This construct
+ is useful when you want to capture part, but not all, of one of a number of
+ alternatives. Inside a (?| group, parentheses are numbered as usual, but the
+ number is reset at the start of each branch. The numbers of any capturing
+ buffers that follow the subpattern start after the highest number used in any
+ branch. The following example is taken from the Perl documentation.
+ The numbers underneath show in which buffer the captured content will be
+ stored.
+ .sp
+   # before  ---------------branch-reset----------- after
+   / ( a )  (?| x ( y ) z | (p (q) r) | (t) u (v) ) ( z ) /x
+   # 1            2         2  3        2     3     4
+ .sp
+ A backreference or a recursive call to a numbered subpattern always refers to
+ the first one in the pattern with the given number.
+ .P
+ An alternative approach to using this "branch reset" feature is to use
+ duplicate named subpatterns, as described in the next section.
+ .
+ .
  .SH "NAMED SUBPATTERNS"
  .rs
  .sp
-Line 1007 
 abbreviation. This pattern (ignoring the
+Line 1179 
 abbreviation. This pattern (ignoring the
    (?<DN>Sat)(?:urday)?
  .sp
  There are five capturing substrings, but only one is ever set after a match.
+ (An alternative way of solving this problem is to use a "branch reset"
+ subpattern, as described in the previous section.)
+ .P
  The convenience function for extracting the data by name returns the substring
  for the first (and in this example, the only) subpattern of that name that
  matched. This saves searching to find which numbered subpattern it was. If you
-Line 1212 
 previous example can be rewritten as
+Line 1387 
 previous example can be rewritten as
  .sp
    \ed++foo
  .sp
+ Note that a possessive quantifier can be used with an entire group, for
+ example:
+ .sp
+   (abc|xyz){2,3}+
+ .sp
  Possessive quantifiers are always greedy; the setting of the PCRE_UNGREEDY
  option is ignored. They are a convenient notation for the simpler forms of
  atomic group. However, there is no difference in the meaning of a possessive
-Line 1286 
 subpattern is possible using named paren
+Line 1466 
 subpattern is possible using named paren
  .P
  Another way of avoiding the ambiguity inherent in the use of digits following a
  backslash is to use the \eg escape sequence, which is a feature introduced in
- Perl 5.10. This escape must be followed by a positive or a negative number,
+ Perl 5.10. This escape must be followed by an unsigned number or a negative
- optionally enclosed in braces. These examples are all identical:
+ number, optionally enclosed in braces. These examples are all identical:
  .sp
    (ring), \e1
    (ring), \eg1
    (ring), \eg{1}
  .sp
- A positive number specifies an absolute reference without the ambiguity that is
+ An unsigned number specifies an absolute reference without the ambiguity that
- present in the older syntax. It is also useful when literal digits follow the
+ is present in the older syntax. It is also useful when literal digits follow
- reference. A negative number is a relative reference. Consider this example:
+ the reference. A negative number is a relative reference. Consider this
+ example:
  .sp
    (abc(def)ghi)\eg{-1}
  .sp
-Line 1325 
 back reference, the case of letters is r
+Line 1506 
 back reference, the case of letters is r
  matches "rah rah" and "RAH RAH", but not "RAH rah", even though the original
  capturing subpattern is matched caselessly.
  .P
- Back references to named subpatterns use the Perl syntax \ek<name> or \ek'name'
+ There are several different ways of writing back references to named
- or the Python syntax (?P=name). We could rewrite the above example in either of
+ subpatterns. The .NET syntax \ek{name} and the Perl syntax \ek<name> or
+ \ek'name' are supported, as is the Python syntax (?P=name). Perl 5.10's unified
+ back reference syntax, in which \eg can be used for both numeric and named
+ references, is also supported. We could rewrite the above example in any of
  the following ways:
  .sp
    (?<p1>(?i)rah)\es+\ek<p1>
+   (?'p1'(?i)rah)\es+\ek{p1}
    (?P<p1>(?i)rah)\es+(?P=p1)
+   (?<p1>(?i)rah)\es+\eg{p1}
  .sp
  A subpattern that is referenced by name may appear in the pattern before or
  after the reference.
-Line 1453 
 lengths, but it is acceptable if rewritt
+Line 1639 
 lengths, but it is acceptable if rewritt
  .sp
    (?<=abc|abde)
  .sp
  In some cases, the Perl 5.10 escape sequence \eK
  .\" HTML <a href="#resetmatchstart">
  .\" </a>
  (see above)
-Line 1555 
 recursion, a pseudo-condition called DEF
+Line 1741 
 recursion, a pseudo-condition called DEF
  .sp
  If the text between the parentheses consists of a sequence of digits, the
  condition is true if the capturing subpattern of that number has previously
  matched. An alternative notation is to precede the digits with a plus or minus
  sign. In this case, the subpattern number is relative rather than absolute.
  The most recently opened parentheses can be referenced by (?(-1), the next most
  recent by (?(-2), and so on. In looping constructs it can also make sense to
  refer to subsequent groups with constructs such as (?(+2).
  .P
-Line 1577 
 parenthesis is required. Otherwise, sinc
+Line 1763 
 parenthesis is required. Otherwise, sinc
  subpattern matches nothing. In other words, this pattern matches a sequence of
  non-parentheses, optionally enclosed in parentheses.
  .P
  If you were embedding this pattern in a larger one, you could use a relative
  reference:
  .sp
    ...other stuff... ( \e( )?    [^()]+    (?(-1) \e) ) ...
-Line 1725 
 pattern, so instead you could use this:
+Line 1911 
 pattern, so instead you could use this:
    ( \e( ( (?>[^()]+) | (?1) )* \e) )
  .sp
  We have put the pattern into parentheses, and caused the recursion to refer to
  them instead of the whole pattern.
  .P
  In a larger pattern, keeping track of parenthesis numbers can be tricky. This
  is made easier by the use of relative references. (A Perl 5.10 feature.)
-Line 1746 
 could rewrite the above example as follo
+Line 1932 
 could rewrite the above example as follo
    (?<pn> \e( ( (?>[^()]+) | (?&pn) )* \e) )
  .sp
  If there is more than one subpattern with the same name, the earliest one is
  used.
  .P
  This particular example pattern that we have been looking at contains nested
  unlimited repeats, and so the use of atomic grouping for matching strings of
-Line 1808 
 relative, as in these examples:
+Line 1994 
 relative, as in these examples:
  .sp
    (...(absolute)...)...(?2)...
    (...(relative)...)...(?-1)...
    (...(?+1)...(relative)...
  .sp
  An earlier example pointed out that the pattern
  .sp
-Line 1873 
 description of the interface to the call
+Line 2059 
 description of the interface to the call
  documentation.
  .
  .
+ .SH "BACKTRACKING CONTROL"
+ .rs
+ .sp
+ Perl 5.10 introduced a number of "Special Backtracking Control Verbs", which
+ are described in the Perl documentation as "experimental and subject to change
+ or removal in a future version of Perl". It goes on to say: "Their usage in
+ production code should be noted to avoid problems during upgrades." The same
+ remarks apply to the PCRE features described in this section.
+ .P
+ Since these verbs are specifically related to backtracking, they can be used
+ only when the pattern is to be matched using \fBpcre_exec()\fP, which uses a
+ backtracking algorithm. They cause an error if encountered by
+ \fBpcre_dfa_exec()\fP.
+ .P
+ The new verbs make use of what was previously invalid syntax: an opening
+ parenthesis followed by an asterisk. In Perl, they are generally of the form
+ (*VERB:ARG) but PCRE does not support the use of arguments, so its general
+ form is just (*VERB). Any number of these verbs may occur in a pattern. There
+ are two kinds:
+ .
+ .SS "Verbs that act immediately"
+ .rs
+ .sp
+ The following verbs act as soon as they are encountered:
+ .sp
+    (*ACCEPT)
+ .sp
+ This verb causes the match to end successfully, skipping the remainder of the
+ pattern. When inside a recursion, only the innermost pattern is ended
+ immediately. PCRE differs from Perl in what happens if the (*ACCEPT) is inside
+ capturing parentheses. In Perl, the data so far is captured: in PCRE no data is
+ captured. For example:
+ .sp
+   A(A|B(*ACCEPT)|C)D
+ .sp
+ This matches "AB", "AAD", or "ACD", but when it matches "AB", no data is
+ captured.
+ .sp
+   (*FAIL) or (*F)
+ .sp
+ This verb causes the match to fail, forcing backtracking to occur. It is
+ equivalent to (?!) but easier to read. The Perl documentation notes that it is
+ probably useful only when combined with (?{}) or (??{}). Those are, of course,
+ Perl features that are not present in PCRE. The nearest equivalent is the
+ callout feature, as for example in this pattern:
+ .sp
+   a+(?C)(*FAIL)
+ .sp
+ A match with the string "aaaa" always fails, but the callout is taken before
+ each backtrack happens (in this example, 10 times).
+ .
+ .SS "Verbs that act after backtracking"
+ .rs
+ .sp
+ The following verbs do nothing when they are encountered. Matching continues
+ with what follows, but if there is no subsequent match, a failure is forced.
+ The verbs differ in exactly what kind of failure occurs.
+ .sp
+   (*COMMIT)
+ .sp
+ This verb causes the whole match to fail outright if the rest of the pattern
+ does not match. Even if the pattern is unanchored, no further attempts to find
+ a match by advancing the start point take place. Once (*COMMIT) has been
+ passed, \fBpcre_exec()\fP is committed to finding a match at the current
+ starting point, or not at all. For example:
+ .sp
+   a+(*COMMIT)b
+ .sp
+ This matches "xxaab" but not "aacaab". It can be thought of as a kind of
+ dynamic anchor, or "I've started, so I must finish."
+ .sp
+   (*PRUNE)
+ .sp
+ This verb causes the match to fail at the current position if the rest of the
+ pattern does not match. If the pattern is unanchored, the normal "bumpalong"
+ advance to the next starting character then happens. Backtracking can occur as
+ usual to the left of (*PRUNE), or when matching to the right of (*PRUNE), but
+ if there is no match to the right, backtracking cannot cross (*PRUNE).
+ In simple cases, the use of (*PRUNE) is just an alternative to an atomic
+ group or possessive quantifier, but there are some uses of (*PRUNE) that cannot
+ be expressed in any other way.
+ .sp
+   (*SKIP)
+ .sp
+ This verb is like (*PRUNE), except that if the pattern is unanchored, the
+ "bumpalong" advance is not to the next character, but to the position in the
+ subject where (*SKIP) was encountered. (*SKIP) signifies that whatever text
+ was matched leading up to it cannot be part of a successful match. Consider:
+ .sp
+   a+(*SKIP)b
+ .sp
+ If the subject is "aaaac...", after the first match attempt fails (starting at
+ the first character in the string), the starting point skips on to start the
+ next attempt at "c". Note that a possessive quantifer does not have the same
+ effect in this example; although it would suppress backtracking during the
+ first match attempt, the second attempt would start at the second character
+ instead of skipping on to "c".
+ .sp
+   (*THEN)
+ .sp
+ This verb causes a skip to the next alternation if the rest of the pattern does
+ not match. That is, it cancels pending backtracking, but only within the
+ current alternation. Its name comes from the observation that it can be used
+ for a pattern-based if-then-else block:
+ .sp
+   ( COND1 (*THEN) FOO | COND2 (*THEN) BAR | COND3 (*THEN) BAZ ) ...
+ .sp
+ If the COND1 pattern matches, FOO is tried (and possibly further items after
+ the end of the group if FOO succeeds); on failure the matcher skips to the
+ second alternative and tries COND2, without backtracking into COND1. If (*THEN)
+ is used outside of any alternation, it acts exactly like (*PRUNE).
+ .
+ .
  .SH "SEE ALSO"
  .rs
  .sp
-Line 1893 
 Cambridge CB2 3QH, England.
+Line 2192 
 Cambridge CB2 3QH, England.
  .rs
  .sp
  .nf
- Last updated: 29 May 2007
+ Last updated: 17 September 2007
  Copyright (c) 1997-2007 University of Cambridge.
  .fi

 Legend:



Removed from v.168
 


changed lines


 
Added in v.259
 Legend:



Removed from v.168
 


changed lines


 
Added in v.259
-Removed from v.168
+Added in v.259

webmaster@exim.org	ViewVC Help
Powered by ViewVC 1.1.12