trunk/doc/pcregrep.1

.TH PCREGREP 1
.SH NAME
pcregrep - a grep with Perl-compatible regular expressions.
.SH SYNOPSIS
.B pcregrep [-Vcfhilnrsvx] pattern [file] ...


.SH DESCRIPTION
\fBpcregrep\fR searches files for character patterns, in the same way as other
grep commands do, but it uses the PCRE regular expression library to support
patterns that are compatible with the regular expressions of Perl 5. See
\fBpcre(3)\fR for a full description of syntax and semantics.

If no files are specified, \fBpcregrep\fR reads the standard input. By default,
each line that matches the pattern is copied to the standard output, and if
there is more than one file, the file name is printed before each line of
output. However, there are options that can change how \fBpcregrep\fR behaves.

Lines are limited to BUFSIZ characters. BUFSIZ is defined in \fB<stdio.h>\fR.
The newline character is removed from the end of each line before it is matched
against the pattern.


.SH OPTIONS
.TP 10
\fB-V\fR
Write the version number of the PCRE library being used to the standard error
stream.
.TP
\fB-c\fR
Do not print individual lines; instead just print a count of the number of
lines that would otherwise have been printed. If several files are given, a
count is printed for each of them.
.TP

       versity of Cambridge for use on Unix systems connected  to
       the  Internet.  It  is freely available under the terms of
       the GNU General Public Licence. In style it is similar  to
       Smail  3,  but  its  facilities are more extensive, and in
       particular it has some defences  against  mail  bombs  and
       unsolicited junk mail, in the form of options for refusing
       messages from particular hosts, networks, or senders.

       Exim's command line takes the  standard  Unix  form  of  a
       sequence  of  options, each starting with a hyphen charac\fB-f\fIfilename\fR
Read patterns from the file, one per line, and match all patterns against each
line. There is a maximum of 100 patterns. Trailing white space is removed, and
blank lines are ignored. An empty file contains no patterns and therefore
matches nothing.
.TP
\fB-h\fR
Suppress printing of filenames when searching multiple files.
.TP
\fB-i\fR
Ignore upper/lower case distinctions during comparisons.
.TP
\fB-l\fR
Instead of printing lines from the files, just print the names of the files
containing lines that would have been printed. Each file name is printed
once, on a separate line.
.TP
\fB-n\fR
Precede each line by its line number in the file.
.TP
\fB-r\fR
If any file is a directory, recursively scan the files it contains. Without
\fB-r\fR a directory is scanned as a normal file.
.TP
\fB-s\fR
Work silently, that is, display nothing except error messages.
The exit status indicates whether any matches were found.
.TP
\fB-v\fR
Invert the sense of the match, so that lines which do \fInot\fR match the
pattern are now the ones that are found.
.TP
\fB-x\fR
Force the pattern to be anchored (it must start matching at the beginning of
the line) and in addition, require it to match the entire line. This is
equivalent to having ^ and $ characters at the start and end of each
alternative branch in the regular expression.


.SH SEE ALSO
\fBpcre(3)\fR, Perl 5 documentation


.SH DIAGNOSTICS
Exit status is 0 if any matches were found, 1 if no matches were found, and 2
for syntax errors or inacessible files (even if matches were found).


.SH AUTHOR
Philip Hazel <ph10@cam.ac.uk>

Last updated: 15 August 2001
.br
Copyright (c) 1997-2001 University of Cambridge.
1	nigel	49	.TH PCREGREP 1
2			.SH NAME
3			pcregrep - a grep with Perl-compatible regular expressions.
4			.SH SYNOPSIS
5	nigel	53	.B pcregrep [-Vcfhilnrsvx] pattern [file] ...
6	nigel	49
7
8			.SH DESCRIPTION
9			\fBpcregrep\fR searches files for character patterns, in the same way as other
10			grep commands do, but it uses the PCRE regular expression library to support
11			patterns that are compatible with the regular expressions of Perl 5. See
12			\fBpcre(3)\fR for a full description of syntax and semantics.
13
14			If no files are specified, \fBpcregrep\fR reads the standard input. By default,
15			each line that matches the pattern is copied to the standard output, and if
16			there is more than one file, the file name is printed before each line of
17			output. However, there are options that can change how \fBpcregrep\fR behaves.
18
19			Lines are limited to BUFSIZ characters. BUFSIZ is defined in \fB<stdio.h>\fR.
20			The newline character is removed from the end of each line before it is matched
21			against the pattern.
22
23
24			.SH OPTIONS
25			.TP 10
26			\fB-V\fR
27			Write the version number of the PCRE library being used to the standard error
28			stream.
29			.TP
30			\fB-c\fR
31			Do not print individual lines; instead just print a count of the number of
32			lines that would otherwise have been printed. If several files are given, a
33			count is printed for each of them.
34			.TP
35	nigel	55
36			versity of Cambridge for use on Unix systems connected to
37			the Internet. It is freely available under the terms of
38			the GNU General Public Licence. In style it is similar to
39			Smail 3, but its facilities are more extensive, and in
40			particular it has some defences against mail bombs and
41			unsolicited junk mail, in the form of options for refusing
42			messages from particular hosts, networks, or senders.
43
44			Exim's command line takes the standard Unix form of a
45			sequence of options, each starting with a hyphen charac\fB-f\fIfilename\fR
46	nigel	53	Read patterns from the file, one per line, and match all patterns against each
47			line. There is a maximum of 100 patterns. Trailing white space is removed, and
48			blank lines are ignored. An empty file contains no patterns and therefore
49			matches nothing.
50			.TP
51	nigel	49	\fB-h\fR
52			Suppress printing of filenames when searching multiple files.
53			.TP
54			\fB-i\fR
55			Ignore upper/lower case distinctions during comparisons.
56			.TP
57			\fB-l\fR
58			Instead of printing lines from the files, just print the names of the files
59			containing lines that would have been printed. Each file name is printed
60			once, on a separate line.
61			.TP
62			\fB-n\fR
63			Precede each line by its line number in the file.
64			.TP
65	nigel	53	\fB-r\fR
66			If any file is a directory, recursively scan the files it contains. Without
67			\fB-r\fR a directory is scanned as a normal file.
68			.TP
69	nigel	49	\fB-s\fR
70			Work silently, that is, display nothing except error messages.
71			The exit status indicates whether any matches were found.
72			.TP
73			\fB-v\fR
74			Invert the sense of the match, so that lines which do \fInot\fR match the
75			pattern are now the ones that are found.
76			.TP
77			\fB-x\fR
78			Force the pattern to be anchored (it must start matching at the beginning of
79			the line) and in addition, require it to match the entire line. This is
80			equivalent to having ^ and $ characters at the start and end of each
81			alternative branch in the regular expression.
82
83
84			.SH SEE ALSO
85			\fBpcre(3)\fR, Perl 5 documentation
86
87
88			.SH DIAGNOSTICS
89			Exit status is 0 if any matches were found, 1 if no matches were found, and 2
90			for syntax errors or inacessible files (even if matches were found).
91
92
93			.SH AUTHOR
94			Philip Hazel <ph10@cam.ac.uk>
95	nigel	53
96			Last updated: 15 August 2001
97	nigel	49	.br
98	nigel	53	Copyright (c) 1997-2001 University of Cambridge.