trunk/doc/pcre.txt

-----------------------------------------------------------------------------
This file contains a concatenation of the PCRE man pages, converted to plain
text format for ease of searching with a text editor, or for use on systems
that do not have a man page processor. The small individual files that give
synopses of each function in the library have not been included. There are
separate text files for the pcregrep and pcretest commands.
-----------------------------------------------------------------------------


PCRE(3)                                                                PCRE(3)


NAME
       PCRE - Perl-compatible regular expressions


INTRODUCTION

       The  PCRE  library is a set of functions that implement regular expres-
       sion pattern matching using the same syntax and semantics as Perl, with
       just  a  few differences. (Certain features that appeared in Python and
       PCRE before they appeared in Perl are also available using  the  Python
       syntax.)

       The  current  implementation of PCRE (release 7.x) corresponds approxi-
       mately with Perl 5.10, including support for UTF-8 encoded strings  and
       Unicode general category properties. However, UTF-8 and Unicode support
       has to be explicitly enabled; it is not the default. The Unicode tables
       correspond to Unicode release 5.0.0.

       In  addition to the Perl-compatible matching function, PCRE contains an
       alternative matching function that matches the same  compiled  patterns
       in  a different way. In certain circumstances, the alternative function
       has some advantages. For a discussion of the two  matching  algorithms,
       see the pcrematching page.

       PCRE  is  written  in C and released as a C library. A number of people
       have written wrappers and interfaces of various kinds.  In  particular,
       Google  Inc.   have  provided  a comprehensive C++ wrapper. This is now
       included as part of the PCRE distribution. The pcrecpp page has details
       of  this  interface.  Other  people's contributions can be found in the
       Contrib directory at the primary FTP site, which is:

       ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre

       Details of exactly which Perl regular expression features are  and  are
       not supported by PCRE are given in separate documents. See the pcrepat-
       tern and pcrecompat pages.

       Some features of PCRE can be included, excluded, or  changed  when  the
       library  is  built.  The pcre_config() function makes it possible for a
       client to discover which features are  available.  The  features  them-
       selves  are described in the pcrebuild page. Documentation about build-
       ing PCRE for various operating systems can be found in the README  file
       in the source distribution.

       The  library  contains  a number of undocumented internal functions and
       data tables that are used by more than one  of  the  exported  external
       functions,  but  which  are  not  intended for use by external callers.
       Their names all begin with "_pcre_", which hopefully will  not  provoke
       any name clashes. In some environments, it is possible to control which
       external symbols are exported when a shared library is  built,  and  in
       these cases the undocumented symbols are not exported.


USER DOCUMENTATION

       The  user  documentation  for PCRE comprises a number of different sec-
       tions. In the "man" format, each of these is a separate "man page".  In
       the  HTML  format, each is a separate page, linked from the index page.
       In the plain text format, all the sections are concatenated,  for  ease
       of searching. The sections are as follows:

         pcre              this document
         pcre-config       show PCRE installation configuration information
         pcreapi           details of PCRE's native C API
         pcrebuild         options for building PCRE
         pcrecallout       details of the callout feature
         pcrecompat        discussion of Perl compatibility
         pcrecpp           details of the C++ wrapper
         pcregrep          description of the pcregrep command
         pcrematching      discussion of the two matching algorithms
         pcrepartial       details of the partial matching facility
         pcrepattern       syntax and semantics of supported
                             regular expressions
         pcreperform       discussion of performance issues
         pcreposix         the POSIX-compatible C API
         pcreprecompile    details of saving and re-using precompiled patterns
         pcresample        discussion of the sample program
         pcrestack         discussion of stack usage
         pcretest          description of the pcretest testing command

       In addition, in the "man" and HTML formats, there is a short  page  for
       each C library function, listing its arguments and results.


LIMITATIONS

       There  are some size limitations in PCRE but it is hoped that they will
       never in practice be relevant.

       The maximum length of a compiled pattern is 65539 (sic) bytes  if  PCRE
       is compiled with the default internal linkage size of 2. If you want to
       process regular expressions that are truly enormous,  you  can  compile
       PCRE  with  an  internal linkage size of 3 or 4 (see the README file in
       the source distribution and the pcrebuild documentation  for  details).
       In  these  cases the limit is substantially larger.  However, the speed
       of execution is slower.

       All values in repeating quantifiers must be less than 65536. The  maxi-
       mum  compiled  length  of  subpattern  with an explicit repeat count is
       30000 bytes. The maximum number of capturing subpatterns is 65535.

       There is no limit to the number of parenthesized subpatterns, but there
       can be no more than 65535 capturing subpatterns.

       The maximum length of name for a named subpattern is 32 characters, and
       the maximum number of named subpatterns is 10000.

       The maximum length of a subject string is the largest  positive  number
       that  an integer variable can hold. However, when using the traditional
       matching function, PCRE uses recursion to handle subpatterns and indef-
       inite  repetition.  This means that the available stack space may limit
       the size of a subject string that can be processed by certain patterns.
       For a discussion of stack issues, see the pcrestack documentation.


UTF-8 AND UNICODE PROPERTY SUPPORT

       From  release  3.3,  PCRE  has  had  some support for character strings
       encoded in the UTF-8 format. For release 4.0 this was greatly  extended
       to  cover  most common requirements, and in release 5.0 additional sup-
       port for Unicode general category properties was added.

       In order process UTF-8 strings, you must build PCRE  to  include  UTF-8
       support  in  the  code,  and, in addition, you must call pcre_compile()
       with the PCRE_UTF8 option flag. When you do this, both the pattern  and
       any  subject  strings  that are matched against it are treated as UTF-8
       strings instead of just strings of bytes.

       If you compile PCRE with UTF-8 support, but do not use it at run  time,
       the  library will be a bit bigger, but the additional run time overhead
       is limited to testing the PCRE_UTF8 flag occasionally, so should not be
       very big.

       If PCRE is built with Unicode character property support (which implies
       UTF-8 support), the escape sequences \p{..}, \P{..}, and  \X  are  sup-
       ported.  The available properties that can be tested are limited to the
       general category properties such as Lu for an upper case letter  or  Nd
       for  a  decimal number, the Unicode script names such as Arabic or Han,
       and the derived properties Any and L&. A full  list  is  given  in  the
       pcrepattern documentation. Only the short names for properties are sup-
       ported. For example, \p{L} matches a letter. Its Perl synonym,  \p{Let-
       ter},  is  not  supported.   Furthermore,  in Perl, many properties may
       optionally be prefixed by "Is", for compatibility with Perl  5.6.  PCRE
       does not support this.

       The following comments apply when PCRE is running in UTF-8 mode:

       1.  When you set the PCRE_UTF8 flag, the strings passed as patterns and
       subjects are checked for validity on entry to the  relevant  functions.
       If an invalid UTF-8 string is passed, an error return is given. In some
       situations, you may already know  that  your  strings  are  valid,  and
       therefore want to skip these checks in order to improve performance. If
       you set the PCRE_NO_UTF8_CHECK flag at compile time  or  at  run  time,
       PCRE  assumes  that  the  pattern or subject it is given (respectively)
       contains only valid UTF-8 codes. In this case, it does not diagnose  an
       invalid  UTF-8 string. If you pass an invalid UTF-8 string to PCRE when
       PCRE_NO_UTF8_CHECK is set, the results are undefined. Your program  may
       crash.

       2.  An  unbraced  hexadecimal  escape sequence (such as \xb3) matches a
       two-byte UTF-8 character if the value is greater than 127.

       3. Octal numbers up to \777 are recognized, and  match  two-byte  UTF-8
       characters for values greater than \177.

       4.  Repeat quantifiers apply to complete UTF-8 characters, not to indi-
       vidual bytes, for example: \x{100}{3}.

       5. The dot metacharacter matches one UTF-8 character instead of a  sin-
       gle byte.

       6.  The  escape sequence \C can be used to match a single byte in UTF-8
       mode, but its use can lead to some strange effects.  This  facility  is
       not available in the alternative matching function, pcre_dfa_exec().

       7.  The  character escapes \b, \B, \d, \D, \s, \S, \w, and \W correctly
       test characters of any code value, but the characters that PCRE  recog-
       nizes  as  digits,  spaces,  or  word characters remain the same set as
       before, all with values less than 256. This remains true even when PCRE
       includes  Unicode  property support, because to do otherwise would slow
       down PCRE in many common cases. If you really want to test for a  wider
       sense  of,  say,  "digit",  you must use Unicode property tests such as
       \p{Nd}.

       8. Similarly, characters that match the POSIX named  character  classes
       are all low-valued characters.

       9.  Case-insensitive  matching  applies only to characters whose values
       are less than 128, unless PCRE is built with Unicode property  support.
       Even  when  Unicode  property support is available, PCRE still uses its
       own character tables when checking the case of  low-valued  characters,
       so  as not to degrade performance.  The Unicode property information is
       used only for characters with higher values. Even when Unicode property
       support is available, PCRE supports case-insensitive matching only when
       there is a one-to-one mapping between a letter's  cases.  There  are  a
       small  number  of  many-to-one  mappings in Unicode; these are not sup-
       ported by PCRE.


AUTHOR

       Philip Hazel
       University Computing Service
       Cambridge CB2 3QH, England.

       Putting an actual email address here seems to have been a spam  magnet,
       so  I've  taken  it away. If you want to email me, use my two initials,
       followed by the two digits 10, at the domain cam.ac.uk.


REVISION

       Last updated: 18 April 2007
       Copyright (c) 1997-2007 University of Cambridge.
------------------------------------------------------------------------------


PCREBUILD(3)                                                      PCREBUILD(3)


NAME
       PCRE - Perl-compatible regular expressions


PCRE BUILD-TIME OPTIONS

       This  document  describes  the  optional  features  of PCRE that can be
       selected when the library is compiled. They are all selected, or  dese-
       lected, by providing options to the configure script that is run before
       the make command. The complete list of  options  for  configure  (which
       includes  the  standard  ones such as the selection of the installation
       directory) can be obtained by running

         ./configure --help

       The following sections include  descriptions  of  options  whose  names
       begin with --enable or --disable. These settings specify changes to the
       defaults for the configure command. Because of the way  that  configure
       works,  --enable  and --disable always come in pairs, so the complemen-
       tary option always exists as well, but as it specifies the default,  it
       is not described.


C++ SUPPORT

       By default, the configure script will search for a C++ compiler and C++
       header files. If it finds them, it automatically builds the C++ wrapper
       library for PCRE. You can disable this by adding

         --disable-cpp

       to the configure command.


UTF-8 SUPPORT

       To build PCRE with support for UTF-8 character strings, add

         --enable-utf8

       to  the  configure  command.  Of  itself, this does not make PCRE treat
       strings as UTF-8. As well as compiling PCRE with this option, you  also
       have  have to set the PCRE_UTF8 option when you call the pcre_compile()
       function.


UNICODE CHARACTER PROPERTY SUPPORT

       UTF-8 support allows PCRE to process character values greater than  255
       in  the  strings that it handles. On its own, however, it does not pro-
       vide any facilities for accessing the properties of such characters. If
       you  want  to  be able to use the pattern escapes \P, \p, and \X, which
       refer to Unicode character properties, you must add

         --enable-unicode-properties

       to the configure command. This implies UTF-8 support, even if you  have
       not explicitly requested it.

       Including  Unicode  property  support  adds around 30K of tables to the
       PCRE library. Only the general category properties such as  Lu  and  Nd
       are supported. Details are given in the pcrepattern documentation.


CODE VALUE OF NEWLINE

       By  default,  PCRE interprets character 10 (linefeed, LF) as indicating
       the end of a line. This is the normal newline  character  on  Unix-like
       systems. You can compile PCRE to use character 13 (carriage return, CR)
       instead, by adding

         --enable-newline-is-cr

       to the  configure  command.  There  is  also  a  --enable-newline-is-lf
       option, which explicitly specifies linefeed as the newline character.

       Alternatively, you can specify that line endings are to be indicated by
       the two character sequence CRLF. If you want this, add

         --enable-newline-is-crlf

       to the configure command. There is a fourth option, specified by

         --enable-newline-is-anycrlf

       which causes PCRE to recognize any of the three sequences  CR,  LF,  or
       CRLF as indicating a line ending. Finally, a fifth option, specified by

         --enable-newline-is-any

       causes PCRE to recognize any Unicode newline sequence.

       Whatever line ending convention is selected when PCRE is built  can  be
       overridden  when  the library functions are called. At build time it is
       conventional to use the standard for your operating system.


BUILDING SHARED AND STATIC LIBRARIES

       The PCRE building process uses libtool to build both shared and  static
       Unix  libraries by default. You can suppress one of these by adding one
       of

         --disable-shared
         --disable-static

       to the configure command, as required.


POSIX MALLOC USAGE

       When PCRE is called through the POSIX interface (see the pcreposix doc-
       umentation),  additional  working  storage  is required for holding the
       pointers to capturing substrings, because PCRE requires three  integers
       per  substring,  whereas  the POSIX interface provides only two. If the
       number of expected substrings is small, the wrapper function uses space
       on the stack, because this is faster than using malloc() for each call.
       The default threshold above which the stack is no longer used is 10; it
       can be changed by adding a setting such as

         --with-posix-malloc-threshold=20

       to the configure command.


HANDLING VERY LARGE PATTERNS

       Within  a  compiled  pattern,  offset values are used to point from one
       part to another (for example, from an opening parenthesis to an  alter-
       nation  metacharacter).  By default, two-byte values are used for these
       offsets, leading to a maximum size for a  compiled  pattern  of  around
       64K.  This  is sufficient to handle all but the most gigantic patterns.
       Nevertheless, some people do want to process enormous patterns,  so  it
       is  possible  to compile PCRE to use three-byte or four-byte offsets by
       adding a setting such as

         --with-link-size=3

       to the configure command. The value given must be 2,  3,  or  4.  Using
       longer  offsets slows down the operation of PCRE because it has to load
       additional bytes when handling them.


AVOIDING EXCESSIVE STACK USAGE

       When matching with the pcre_exec() function, PCRE implements backtrack-
       ing  by  making recursive calls to an internal function called match().
       In environments where the size of the stack is limited,  this  can  se-
       verely  limit  PCRE's operation. (The Unix environment does not usually
       suffer from this problem, but it may sometimes be necessary to increase
       the  maximum  stack size.  There is a discussion in the pcrestack docu-
       mentation.) An alternative approach to recursion that uses memory  from
       the  heap  to remember data, instead of using recursive function calls,
       has been implemented to work round the problem of limited  stack  size.
       If you want to build a version of PCRE that works this way, add

         --disable-stack-for-recursion

       to  the  configure  command. With this configuration, PCRE will use the
       pcre_stack_malloc and pcre_stack_free variables to call memory  manage-
       ment  functions.  Separate  functions are provided because the usage is
       very predictable: the block sizes requested are always  the  same,  and
       the  blocks  are always freed in reverse order. A calling program might
       be able to implement optimized functions that perform better  than  the
       standard  malloc()  and  free()  functions.  PCRE  runs noticeably more
       slowly when built in this way. This option affects only the pcre_exec()
       function; it is not relevant for the the pcre_dfa_exec() function.


LIMITING PCRE RESOURCE USAGE

       Internally,  PCRE has a function called match(), which it calls repeat-
       edly  (sometimes  recursively)  when  matching  a  pattern   with   the
       pcre_exec()  function.  By controlling the maximum number of times this
       function may be called during a single matching operation, a limit  can
       be  placed  on  the resources used by a single call to pcre_exec(). The
       limit can be changed at run time, as described in the pcreapi  documen-
       tation.  The default is 10 million, but this can be changed by adding a
       setting such as

         --with-match-limit=500000

       to  the  configure  command.  This  setting  has  no  effect   on   the
       pcre_dfa_exec() matching function.

       In  some  environments  it is desirable to limit the depth of recursive
       calls of match() more strictly than the total number of calls, in order
       to  restrict  the maximum amount of stack (or heap, if --disable-stack-
       for-recursion is specified) that is used. A second limit controls this;
       it  defaults  to  the  value  that is set for --with-match-limit, which
       imposes no additional constraints. However, you can set a  lower  limit
       by adding, for example,

         --with-match-limit-recursion=10000

       to  the  configure  command.  This  value can also be overridden at run
       time.


CREATING CHARACTER TABLES AT BUILD TIME

       PCRE uses fixed tables for processing characters whose code values  are
       less  than 256. By default, PCRE is built with a set of tables that are
       distributed in the file pcre_chartables.c.dist. These  tables  are  for
       ASCII codes only. If you add

         --enable-rebuild-chartables

       to  the  configure  command, the distributed tables are no longer used.
       Instead, a program called dftables is compiled and  run.  This  outputs
       the source for new set of tables, created in the default locale of your
       C runtime system. (This method of replacing the tables does not work if
       you  are cross compiling, because dftables is run on the local host. If
       you need to create alternative tables when cross  compiling,  you  will
       have to do so "by hand".)


USING EBCDIC CODE

       PCRE  assumes  by  default that it will run in an environment where the
       character code is ASCII (or Unicode, which is  a  superset  of  ASCII).
       PCRE  can,  however,  be  compiled  to  run in an EBCDIC environment by
       adding

         --enable-ebcdic

       to the configure command. This setting implies --enable-rebuild-charta-
       bles.


SEE ALSO

       pcreapi(3), pcre_config(3).


AUTHOR

       Philip Hazel
       University Computing Service
       Cambridge CB2 3QH, England.


REVISION

       Last updated: 16 April 2007
       Copyright (c) 1997-2007 University of Cambridge.
------------------------------------------------------------------------------


PCREMATCHING(3)                                                PCREMATCHING(3)


NAME
       PCRE - Perl-compatible regular expressions


PCRE MATCHING ALGORITHMS

       This document describes the two different algorithms that are available
       in PCRE for matching a compiled regular expression against a given sub-
       ject  string.  The  "standard"  algorithm  is  the  one provided by the
       pcre_exec() function.  This works in the same was  as  Perl's  matching
       function, and provides a Perl-compatible matching operation.

       An  alternative  algorithm is provided by the pcre_dfa_exec() function;
       this operates in a different way, and is not  Perl-compatible.  It  has
       advantages  and disadvantages compared with the standard algorithm, and
       these are described below.

       When there is only one possible way in which a given subject string can
       match  a pattern, the two algorithms give the same answer. A difference
       arises, however, when there are multiple possibilities. For example, if
       the pattern

         ^<.*>

       is matched against the string

         <something> <something else> <something further>

       there are three possible answers. The standard algorithm finds only one
       of them, whereas the alternative algorithm finds all three.


REGULAR EXPRESSIONS AS TREES

       The set of strings that are matched by a regular expression can be rep-
       resented  as  a  tree structure. An unlimited repetition in the pattern
       makes the tree of infinite size, but it is still a tree.  Matching  the
       pattern  to a given subject string (from a given starting point) can be
       thought of as a search of the tree.  There are two  ways  to  search  a
       tree:  depth-first  and  breadth-first, and these correspond to the two
       matching algorithms provided by PCRE.


THE STANDARD MATCHING ALGORITHM

       In the terminology of Jeffrey Friedl's book "Mastering Regular  Expres-
       sions",  the  standard  algorithm  is an "NFA algorithm". It conducts a
       depth-first search of the pattern tree. That is, it  proceeds  along  a
       single path through the tree, checking that the subject matches what is
       required. When there is a mismatch, the algorithm  tries  any  alterna-
       tives  at  the  current point, and if they all fail, it backs up to the
       previous branch point in the  tree,  and  tries  the  next  alternative
       branch  at  that  level.  This often involves backing up (moving to the
       left) in the subject string as well.  The  order  in  which  repetition
       branches  are  tried  is controlled by the greedy or ungreedy nature of
       the quantifier.

       If a leaf node is reached, a matching string has  been  found,  and  at
       that  point the algorithm stops. Thus, if there is more than one possi-
       ble match, this algorithm returns the first one that it finds.  Whether
       this  is the shortest, the longest, or some intermediate length depends
       on the way the greedy and ungreedy repetition quantifiers are specified
       in the pattern.

       Because  it  ends  up  with a single path through the tree, it is rela-
       tively straightforward for this algorithm to keep  track  of  the  sub-
       strings  that  are  matched  by portions of the pattern in parentheses.
       This provides support for capturing parentheses and back references.


THE ALTERNATIVE MATCHING ALGORITHM

       This algorithm conducts a breadth-first search of  the  tree.  Starting
       from  the  first  matching  point  in the subject, it scans the subject
       string from left to right, once, character by character, and as it does
       this,  it remembers all the paths through the tree that represent valid
       matches. In Friedl's terminology, this is a kind  of  "DFA  algorithm",
       though  it is not implemented as a traditional finite state machine (it
       keeps multiple states active simultaneously).

       The scan continues until either the end of the subject is  reached,  or
       there  are  no more unterminated paths. At this point, terminated paths
       represent the different matching possibilities (if there are none,  the
       match  has  failed).   Thus,  if there is more than one possible match,
       this algorithm finds all of them, and in particular, it finds the long-
       est.  In PCRE, there is an option to stop the algorithm after the first
       match (which is necessarily the shortest) has been found.

       Note that all the matches that are found start at the same point in the
       subject. If the pattern

         cat(er(pillar)?)

       is  matched  against the string "the caterpillar catchment", the result
       will be the three strings "cat", "cater", and "caterpillar" that  start
       at the fourth character of the subject. The algorithm does not automat-
       ically move on to find matches that start at later positions.

       There are a number of features of PCRE regular expressions that are not
       supported by the alternative matching algorithm. They are as follows:

       1.  Because  the  algorithm  finds  all possible matches, the greedy or
       ungreedy nature of repetition quantifiers is not relevant.  Greedy  and
       ungreedy quantifiers are treated in exactly the same way. However, pos-
       sessive quantifiers can make a difference when what follows could  also
       match what is quantified, for example in a pattern like this:

         ^a++\w!

       This  pattern matches "aaab!" but not "aaa!", which would be matched by
       a non-possessive quantifier. Similarly, if an atomic group is  present,
       it  is matched as if it were a standalone pattern at the current point,
       and the longest match is then "locked in" for the rest of  the  overall
       pattern.

       2. When dealing with multiple paths through the tree simultaneously, it
       is not straightforward to keep track of  captured  substrings  for  the
       different  matching  possibilities,  and  PCRE's implementation of this
       algorithm does not attempt to do this. This means that no captured sub-
       strings are available.

       3.  Because no substrings are captured, back references within the pat-
       tern are not supported, and cause errors if encountered.

       4. For the same reason, conditional expressions that use  a  backrefer-
       ence  as  the  condition or test for a specific group recursion are not
       supported.

       5. Callouts are supported, but the value of the  capture_top  field  is
       always 1, and the value of the capture_last field is always -1.

       6.  The \C escape sequence, which (in the standard algorithm) matches a
       single byte, even in UTF-8 mode, is not supported because the  alterna-
       tive  algorithm  moves  through  the  subject string one character at a
       time, for all active paths through the tree.


ADVANTAGES OF THE ALTERNATIVE ALGORITHM

       Using the alternative matching algorithm provides the following  advan-
       tages:

       1. All possible matches (at a single point in the subject) are automat-
       ically found, and in particular, the longest match is  found.  To  find
       more than one match using the standard algorithm, you have to do kludgy
       things with callouts.

       2. There is much better support for partial matching. The  restrictions
       on  the content of the pattern that apply when using the standard algo-
       rithm for partial matching do not apply to the  alternative  algorithm.
       For  non-anchored patterns, the starting position of a partial match is
       available.

       3. Because the alternative algorithm  scans  the  subject  string  just
       once,  and  never  needs to backtrack, it is possible to pass very long
       subject strings to the matching function in  several  pieces,  checking
       for partial matching each time.


DISADVANTAGES OF THE ALTERNATIVE ALGORITHM

       The alternative algorithm suffers from a number of disadvantages:

       1.  It  is  substantially  slower  than the standard algorithm. This is
       partly because it has to search for all possible matches, but  is  also
       because it is less susceptible to optimization.

       2. Capturing parentheses and back references are not supported.

       3. Although atomic groups are supported, their use does not provide the
       performance advantage that it does for the standard algorithm.


AUTHOR

       Philip Hazel
       University Computing Service
       Cambridge CB2 3QH, England.


REVISION

       Last updated: 06 March 2007
       Copyright (c) 1997-2007 University of Cambridge.
------------------------------------------------------------------------------


PCREAPI(3)                                                          PCREAPI(3)


NAME
       PCRE - Perl-compatible regular expressions


PCRE NATIVE API

       #include <pcre.h>

       pcre *pcre_compile(const char *pattern, int options,
            const char **errptr, int *erroffset,
            const unsigned char *tableptr);

       pcre *pcre_compile2(const char *pattern, int options,
            int *errorcodeptr,
            const char **errptr, int *erroffset,
            const unsigned char *tableptr);

       pcre_extra *pcre_study(const pcre *code, int options,
            const char **errptr);

       int pcre_exec(const pcre *code, const pcre_extra *extra,
            const char *subject, int length, int startoffset,
            int options, int *ovector, int ovecsize);

       int pcre_dfa_exec(const pcre *code, const pcre_extra *extra,
            const char *subject, int length, int startoffset,
            int options, int *ovector, int ovecsize,
            int *workspace, int wscount);

       int pcre_copy_named_substring(const pcre *code,
            const char *subject, int *ovector,
            int stringcount, const char *stringname,
            char *buffer, int buffersize);

       int pcre_copy_substring(const char *subject, int *ovector,
            int stringcount, int stringnumber, char *buffer,
            int buffersize);

       int pcre_get_named_substring(const pcre *code,
            const char *subject, int *ovector,
            int stringcount, const char *stringname,
            const char **stringptr);

       int pcre_get_stringnumber(const pcre *code,
            const char *name);

       int pcre_get_stringtable_entries(const pcre *code,
            const char *name, char **first, char **last);

       int pcre_get_substring(const char *subject, int *ovector,
            int stringcount, int stringnumber,
            const char **stringptr);

       int pcre_get_substring_list(const char *subject,
            int *ovector, int stringcount, const char ***listptr);

       void pcre_free_substring(const char *stringptr);

       void pcre_free_substring_list(const char **stringptr);

       const unsigned char *pcre_maketables(void);

       int pcre_fullinfo(const pcre *code, const pcre_extra *extra,
            int what, void *where);

       int pcre_info(const pcre *code, int *optptr, int *firstcharptr);

       int pcre_refcount(pcre *code, int adjust);

       int pcre_config(int what, void *where);

       char *pcre_version(void);

       void *(*pcre_malloc)(size_t);

       void (*pcre_free)(void *);

       void *(*pcre_stack_malloc)(size_t);

       void (*pcre_stack_free)(void *);

       int (*pcre_callout)(pcre_callout_block *);


PCRE API OVERVIEW

       PCRE has its own native API, which is described in this document. There
       are also some wrapper functions that correspond to  the  POSIX  regular
       expression  API.  These  are  described in the pcreposix documentation.
       Both of these APIs define a set of C function calls. A C++  wrapper  is
       distributed with PCRE. It is documented in the pcrecpp page.

       The  native  API  C  function prototypes are defined in the header file
       pcre.h, and on Unix systems the library itself is called  libpcre.   It
       can normally be accessed by adding -lpcre to the command for linking an
       application  that  uses  PCRE.  The  header  file  defines  the  macros
       PCRE_MAJOR  and  PCRE_MINOR to contain the major and minor release num-
       bers for the library.  Applications can use these  to  include  support
       for different releases of PCRE.

       The   functions   pcre_compile(),  pcre_compile2(),  pcre_study(),  and
       pcre_exec() are used for compiling and matching regular expressions  in
       a  Perl-compatible  manner. A sample program that demonstrates the sim-
       plest way of using them is provided in the file  called  pcredemo.c  in
       the  source distribution. The pcresample documentation describes how to
       run it.

       A second matching function, pcre_dfa_exec(), which is not Perl-compati-
       ble,  is  also provided. This uses a different algorithm for the match-
       ing. The alternative algorithm finds all possible matches (at  a  given
       point  in  the subject), and scans the subject just once. However, this
       algorithm does not return captured substrings. A description of the two
       matching  algorithms and their advantages and disadvantages is given in
       the pcrematching documentation.

       In addition to the main compiling and  matching  functions,  there  are
       convenience functions for extracting captured substrings from a subject
       string that is matched by pcre_exec(). They are:

         pcre_copy_substring()
         pcre_copy_named_substring()
         pcre_get_substring()
         pcre_get_named_substring()
         pcre_get_substring_list()
         pcre_get_stringnumber()
         pcre_get_stringtable_entries()

       pcre_free_substring() and pcre_free_substring_list() are also provided,
       to free the memory used for extracted strings.

       The  function  pcre_maketables()  is  used  to build a set of character
       tables  in  the  current  locale   for   passing   to   pcre_compile(),
       pcre_exec(),  or  pcre_dfa_exec(). This is an optional facility that is
       provided for specialist use.  Most  commonly,  no  special  tables  are
       passed,  in  which case internal tables that are generated when PCRE is
       built are used.

       The function pcre_fullinfo() is used to find out  information  about  a
       compiled  pattern; pcre_info() is an obsolete version that returns only
       some of the available information, but is retained for  backwards  com-
       patibility.   The function pcre_version() returns a pointer to a string
       containing the version of PCRE and its date of release.

       The function pcre_refcount() maintains a  reference  count  in  a  data
       block  containing  a compiled pattern. This is provided for the benefit
       of object-oriented applications.

       The global variables pcre_malloc and pcre_free  initially  contain  the
       entry  points  of  the  standard malloc() and free() functions, respec-
       tively. PCRE calls the memory management functions via these variables,
       so  a  calling  program  can replace them if it wishes to intercept the
       calls. This should be done before calling any PCRE functions.

       The global variables pcre_stack_malloc  and  pcre_stack_free  are  also
       indirections  to  memory  management functions. These special functions
       are used only when PCRE is compiled to use  the  heap  for  remembering
       data, instead of recursive function calls, when running the pcre_exec()
       function. See the pcrebuild documentation for  details  of  how  to  do
       this.  It  is  a non-standard way of building PCRE, for use in environ-
       ments that have limited stacks. Because of the greater  use  of  memory
       management,  it  runs  more  slowly. Separate functions are provided so
       that special-purpose external code can be  used  for  this  case.  When
       used,  these  functions  are always called in a stack-like manner (last
       obtained, first freed), and always for memory blocks of the same  size.
       There  is  a discussion about PCRE's stack usage in the pcrestack docu-
       mentation.

       The global variable pcre_callout initially contains NULL. It can be set
       by  the  caller  to  a "callout" function, which PCRE will then call at
       specified points during a matching operation. Details are given in  the
       pcrecallout documentation.


NEWLINES

       PCRE  supports five different conventions for indicating line breaks in
       strings: a single CR (carriage return) character, a  single  LF  (line-
       feed) character, the two-character sequence CRLF, any of the three pre-
       ceding, or any Unicode newline sequence. The Unicode newline  sequences
       are  the  three just mentioned, plus the single characters VT (vertical
       tab, U+000B), FF (formfeed, U+000C), NEL (next line, U+0085), LS  (line
       separator, U+2028), and PS (paragraph separator, U+2029).

       Each  of  the first three conventions is used by at least one operating
       system as its standard newline sequence. When PCRE is built, a  default
       can  be  specified.  The default default is LF, which is the Unix stan-
       dard. When PCRE is run, the default can be overridden,  either  when  a
       pattern is compiled, or when it is matched.

       In the PCRE documentation the word "newline" is used to mean "the char-
       acter or pair of characters that indicate a line break". The choice  of
       newline  convention  affects  the  handling of the dot, circumflex, and
       dollar metacharacters, the handling of #-comments in /x mode, and, when
       CRLF  is a recognized line ending sequence, the match position advance-
       ment for a non-anchored pattern. The choice of newline convention  does
       not affect the interpretation of the \n or \r escape sequences.


MULTITHREADING

       The  PCRE  functions  can be used in multi-threading applications, with
       the  proviso  that  the  memory  management  functions  pointed  to  by
       pcre_malloc, pcre_free, pcre_stack_malloc, and pcre_stack_free, and the
       callout function pointed to by pcre_callout, are shared by all threads.

       The  compiled form of a regular expression is not altered during match-
       ing, so the same compiled pattern can safely be used by several threads
       at once.


SAVING PRECOMPILED PATTERNS FOR LATER USE

       The compiled form of a regular expression can be saved and re-used at a
       later time, possibly by a different program, and even on a  host  other
       than  the  one  on  which  it  was  compiled.  Details are given in the
       pcreprecompile documentation. However, compiling a  regular  expression
       with  one version of PCRE for use with a different version is not guar-
       anteed to work and may cause crashes.


CHECKING BUILD-TIME OPTIONS

       int pcre_config(int what, void *where);

       The function pcre_config() makes it possible for a PCRE client to  dis-
       cover which optional features have been compiled into the PCRE library.
       The pcrebuild documentation has more details about these optional  fea-
       tures.

       The  first  argument  for pcre_config() is an integer, specifying which
       information is required; the second argument is a pointer to a variable
       into  which  the  information  is  placed. The following information is
       available:

         PCRE_CONFIG_UTF8

       The output is an integer that is set to one if UTF-8 support is  avail-
       able; otherwise it is set to zero.

         PCRE_CONFIG_UNICODE_PROPERTIES

       The  output  is  an  integer  that is set to one if support for Unicode
       character properties is available; otherwise it is set to zero.

         PCRE_CONFIG_NEWLINE

       The output is an integer whose value specifies  the  default  character
       sequence  that is recognized as meaning "newline". The four values that
       are supported are: 10 for LF, 13 for CR, 3338 for CRLF, -2 for ANYCRLF,
       and  -1  for  ANY. The default should normally be the standard sequence
       for your operating system.

         PCRE_CONFIG_LINK_SIZE

       The output is an integer that contains the number  of  bytes  used  for
       internal linkage in compiled regular expressions. The value is 2, 3, or
       4. Larger values allow larger regular expressions to  be  compiled,  at
       the  expense  of  slower matching. The default value of 2 is sufficient
       for all but the most massive patterns, since  it  allows  the  compiled
       pattern to be up to 64K in size.

         PCRE_CONFIG_POSIX_MALLOC_THRESHOLD

       The  output  is  an integer that contains the threshold above which the
       POSIX interface uses malloc() for output vectors. Further  details  are
       given in the pcreposix documentation.

         PCRE_CONFIG_MATCH_LIMIT

       The output is an integer that gives the default limit for the number of
       internal matching function calls in a  pcre_exec()  execution.  Further
       details are given with pcre_exec() below.

         PCRE_CONFIG_MATCH_LIMIT_RECURSION

       The  output is an integer that gives the default limit for the depth of
       recursion when calling the internal matching function in a  pcre_exec()
       execution. Further details are given with pcre_exec() below.

         PCRE_CONFIG_STACKRECURSE

       The  output is an integer that is set to one if internal recursion when
       running pcre_exec() is implemented by recursive function calls that use
       the  stack  to remember their state. This is the usual way that PCRE is
       compiled. The output is zero if PCRE was compiled to use blocks of data
       on  the  heap  instead  of  recursive  function  calls.  In  this case,
       pcre_stack_malloc and  pcre_stack_free  are  called  to  manage  memory
       blocks on the heap, thus avoiding the use of the stack.


COMPILING A PATTERN

       pcre *pcre_compile(const char *pattern, int options,
            const char **errptr, int *erroffset,
            const unsigned char *tableptr);

       pcre *pcre_compile2(const char *pattern, int options,
            int *errorcodeptr,
            const char **errptr, int *erroffset,
            const unsigned char *tableptr);

       Either of the functions pcre_compile() or pcre_compile2() can be called
       to compile a pattern into an internal form. The only difference between
       the  two interfaces is that pcre_compile2() has an additional argument,
       errorcodeptr, via which a numerical error code can be returned.

       The pattern is a C string terminated by a binary zero, and is passed in
       the  pattern  argument.  A  pointer to a single block of memory that is
       obtained via pcre_malloc is returned. This contains the  compiled  code
       and related data. The pcre type is defined for the returned block; this
       is a typedef for a structure whose contents are not externally defined.
       It is up to the caller to free the memory (via pcre_free) when it is no
       longer required.

       Although the compiled code of a PCRE regex is relocatable, that is,  it
       does not depend on memory location, the complete pcre data block is not
       fully relocatable, because it may contain a copy of the tableptr  argu-
       ment, which is an address (see below).

       The options argument contains various bit settings that affect the com-
       pilation. It should be zero if no options are required.  The  available
       options  are  described  below. Some of them, in particular, those that
       are compatible with Perl, can also be set and  unset  from  within  the
       pattern  (see  the  detailed  description in the pcrepattern documenta-
       tion). For these options, the contents of the options  argument  speci-
       fies  their initial settings at the start of compilation and execution.
       The PCRE_ANCHORED and PCRE_NEWLINE_xxx options can be set at  the  time
       of matching as well as at compile time.

       If errptr is NULL, pcre_compile() returns NULL immediately.  Otherwise,
       if compilation of a pattern fails,  pcre_compile()  returns  NULL,  and
       sets the variable pointed to by errptr to point to a textual error mes-
       sage. This is a static string that is part of the library. You must not
       try to free it. The offset from the start of the pattern to the charac-
       ter where the error was discovered is placed in the variable pointed to
       by  erroffset,  which must not be NULL. If it is, an immediate error is
       given.

       If pcre_compile2() is used instead of pcre_compile(),  and  the  error-
       codeptr  argument is not NULL, a non-zero error code number is returned
       via this argument in the event of an error. This is in addition to  the
       textual error message. Error codes and messages are listed below.

       If  the  final  argument, tableptr, is NULL, PCRE uses a default set of
       character tables that are  built  when  PCRE  is  compiled,  using  the
       default  C  locale.  Otherwise, tableptr must be an address that is the
       result of a call to pcre_maketables(). This value is  stored  with  the
       compiled  pattern,  and used again by pcre_exec(), unless another table
       pointer is passed to it. For more discussion, see the section on locale
       support below.

       This  code  fragment  shows a typical straightforward call to pcre_com-
       pile():

         pcre *re;
         const char *error;
         int erroffset;
         re = pcre_compile(
           "^A.*Z",          /* the pattern */
           0,                /* default options */
           &error,           /* for error message */
           &erroffset,       /* for error offset */
           NULL);            /* use default character tables */

       The following names for option bits are defined in  the  pcre.h  header
       file:

         PCRE_ANCHORED

       If this bit is set, the pattern is forced to be "anchored", that is, it
       is constrained to match only at the first matching point in the  string
       that  is being searched (the "subject string"). This effect can also be
       achieved by appropriate constructs in the pattern itself, which is  the
       only way to do it in Perl.

         PCRE_AUTO_CALLOUT

       If this bit is set, pcre_compile() automatically inserts callout items,
       all with number 255, before each pattern item. For  discussion  of  the
       callout facility, see the pcrecallout documentation.

         PCRE_CASELESS

       If  this  bit is set, letters in the pattern match both upper and lower
       case letters. It is equivalent to Perl's  /i  option,  and  it  can  be
       changed  within a pattern by a (?i) option setting. In UTF-8 mode, PCRE
       always understands the concept of case for characters whose values  are
       less  than 128, so caseless matching is always possible. For characters
       with higher values, the concept of case is supported if  PCRE  is  com-
       piled  with Unicode property support, but not otherwise. If you want to
       use caseless matching for characters 128 and  above,  you  must  ensure
       that  PCRE  is  compiled  with Unicode property support as well as with
       UTF-8 support.

         PCRE_DOLLAR_ENDONLY

       If this bit is set, a dollar metacharacter in the pattern matches  only
       at  the  end  of the subject string. Without this option, a dollar also
       matches immediately before a newline at the end of the string (but  not
       before  any  other newlines). The PCRE_DOLLAR_ENDONLY option is ignored
       if PCRE_MULTILINE is set.  There is no equivalent  to  this  option  in
       Perl, and no way to set it within a pattern.

         PCRE_DOTALL

       If this bit is set, a dot metacharater in the pattern matches all char-
       acters, including those that indicate newline. Without it, a  dot  does
       not  match  when  the  current position is at a newline. This option is
       equivalent to Perl's /s option, and it can be changed within a  pattern
       by  a (?s) option setting. A negative class such as [^a] always matches
       newline characters, independent of the setting of this option.

         PCRE_DUPNAMES

       If this bit is set, names used to identify capturing  subpatterns  need
       not be unique. This can be helpful for certain types of pattern when it
       is known that only one instance of the named  subpattern  can  ever  be
       matched.  There  are  more details of named subpatterns below; see also
       the pcrepattern documentation.

         PCRE_EXTENDED

       If this bit is set, whitespace  data  characters  in  the  pattern  are
       totally ignored except when escaped or inside a character class. White-
       space does not include the VT character (code 11). In addition, charac-
       ters between an unescaped # outside a character class and the next new-
       line, inclusive, are also ignored. This  is  equivalent  to  Perl's  /x
       option,  and  it  can be changed within a pattern by a (?x) option set-
       ting.

       This option makes it possible to include  comments  inside  complicated
       patterns.   Note,  however,  that this applies only to data characters.
       Whitespace  characters  may  never  appear  within  special   character
       sequences  in  a  pattern,  for  example  within the sequence (?( which
       introduces a conditional subpattern.

         PCRE_EXTRA

       This option was invented in order to turn on  additional  functionality
       of  PCRE  that  is  incompatible with Perl, but it is currently of very
       little use. When set, any backslash in a pattern that is followed by  a
       letter  that  has  no  special  meaning causes an error, thus reserving
       these combinations for future expansion. By  default,  as  in  Perl,  a
       backslash  followed by a letter with no special meaning is treated as a
       literal. (Perl can, however, be persuaded to give a warning for  this.)
       There  are  at  present no other features controlled by this option. It
       can also be set by a (?X) option setting within a pattern.

         PCRE_FIRSTLINE

       If this option is set, an  unanchored  pattern  is  required  to  match
       before  or  at  the  first  newline  in  the subject string, though the
       matched text may continue over the newline.

         PCRE_MULTILINE

       By default, PCRE treats the subject string as consisting  of  a  single
       line  of characters (even if it actually contains newlines). The "start
       of line" metacharacter (^) matches only at the  start  of  the  string,
       while  the  "end  of line" metacharacter ($) matches only at the end of
       the string, or before a terminating newline (unless PCRE_DOLLAR_ENDONLY
       is set). This is the same as Perl.

       When  PCRE_MULTILINE  it  is set, the "start of line" and "end of line"
       constructs match immediately following or immediately  before  internal
       newlines  in  the  subject string, respectively, as well as at the very
       start and end. This is equivalent to Perl's /m option, and  it  can  be
       changed within a pattern by a (?m) option setting. If there are no new-
       lines in a subject string, or no occurrences of ^ or $  in  a  pattern,
       setting PCRE_MULTILINE has no effect.

         PCRE_NEWLINE_CR
         PCRE_NEWLINE_LF
         PCRE_NEWLINE_CRLF
         PCRE_NEWLINE_ANYCRLF
         PCRE_NEWLINE_ANY

       These  options  override the default newline definition that was chosen
       when PCRE was built. Setting the first or the second specifies  that  a
       newline  is  indicated  by a single character (CR or LF, respectively).
       Setting PCRE_NEWLINE_CRLF specifies that a newline is indicated by  the
       two-character  CRLF  sequence.  Setting  PCRE_NEWLINE_ANYCRLF specifies
       that any of the three preceding sequences should be recognized. Setting
       PCRE_NEWLINE_ANY  specifies that any Unicode newline sequence should be
       recognized. The Unicode newline sequences are the three just mentioned,
       plus  the  single  characters  VT (vertical tab, U+000B), FF (formfeed,
       U+000C), NEL (next line, U+0085), LS (line separator, U+2028),  and  PS
       (paragraph  separator,  U+2029).  The  last  two are recognized only in
       UTF-8 mode.

       The newline setting in the  options  word  uses  three  bits  that  are
       treated as a number, giving eight possibilities. Currently only six are
       used (default plus the five values above). This means that if  you  set
       more  than one newline option, the combination may or may not be sensi-
       ble. For example, PCRE_NEWLINE_CR with PCRE_NEWLINE_LF is equivalent to
       PCRE_NEWLINE_CRLF,  but other combinations may yield unused numbers and
       cause an error.

       The only time that a line break is specially recognized when  compiling
       a  pattern  is  if  PCRE_EXTENDED  is set, and an unescaped # outside a
       character class is encountered. This indicates  a  comment  that  lasts
       until  after the next line break sequence. In other circumstances, line
       break  sequences  are  treated  as  literal  data,   except   that   in
       PCRE_EXTENDED mode, both CR and LF are treated as whitespace characters
       and are therefore ignored.

       The newline option that is set at compile time becomes the default that
       is  used for pcre_exec() and pcre_dfa_exec(), but it can be overridden.

         PCRE_NO_AUTO_CAPTURE

       If this option is set, it disables the use of numbered capturing paren-
       theses  in the pattern. Any opening parenthesis that is not followed by
       ? behaves as if it were followed by ?: but named parentheses can  still
       be  used  for  capturing  (and  they acquire numbers in the usual way).
       There is no equivalent of this option in Perl.

         PCRE_UNGREEDY

       This option inverts the "greediness" of the quantifiers  so  that  they
       are  not greedy by default, but become greedy if followed by "?". It is
       not compatible with Perl. It can also be set by a (?U)  option  setting
       within the pattern.

         PCRE_UTF8

       This  option  causes PCRE to regard both the pattern and the subject as
       strings of UTF-8 characters instead of single-byte  character  strings.
       However,  it is available only when PCRE is built to include UTF-8 sup-
       port. If not, the use of this option provokes an error. Details of  how
       this  option  changes the behaviour of PCRE are given in the section on
       UTF-8 support in the main pcre page.

         PCRE_NO_UTF8_CHECK

       When PCRE_UTF8 is set, the validity of the pattern as a UTF-8 string is
       automatically  checked. If an invalid UTF-8 sequence of bytes is found,
       pcre_compile() returns an error. If you already know that your  pattern
       is  valid, and you want to skip this check for performance reasons, you
       can set the PCRE_NO_UTF8_CHECK option. When it is set,  the  effect  of
       passing an invalid UTF-8 string as a pattern is undefined. It may cause
       your program to crash.  Note that this option can  also  be  passed  to
       pcre_exec()  and pcre_dfa_exec(), to suppress the UTF-8 validity check-
       ing of subject strings.


COMPILATION ERROR CODES

       The following table lists the error  codes  than  may  be  returned  by
       pcre_compile2(),  along with the error messages that may be returned by
       both compiling functions. As PCRE has developed, some error codes  have
       fallen out of use. To avoid confusion, they have not been re-used.

          0  no error
          1  \ at end of pattern
          2  \c at end of pattern
          3  unrecognized character follows \
          4  numbers out of order in {} quantifier
          5  number too big in {} quantifier
          6  missing terminating ] for character class
          7  invalid escape sequence in character class
          8  range out of order in character class
          9  nothing to repeat
         10  [this code is not in use]
         11  internal error: unexpected repeat
         12  unrecognized character after (?
         13  POSIX named classes are supported only within a class
         14  missing )
         15  reference to non-existent subpattern
         16  erroffset passed as NULL
         17  unknown option bit(s) set
         18  missing ) after comment
         19  [this code is not in use]
         20  regular expression too large
         21  failed to get memory
         22  unmatched parentheses
         23  internal error: code overflow
         24  unrecognized character after (?<
         25  lookbehind assertion is not fixed length
         26  malformed number or name after (?(
         27  conditional group contains more than two branches
         28  assertion expected after (?(
         29  (?R or (?digits must be followed by )
         30  unknown POSIX class name
         31  POSIX collating elements are not supported
         32  this version of PCRE is not compiled with PCRE_UTF8 support
         33  [this code is not in use]
         34  character value in \x{...} sequence is too large
         35  invalid condition (?(0)
         36  \C not allowed in lookbehind assertion
         37  PCRE does not support \L, \l, \N, \U, or \u
         38  number after (?C is > 255
         39  closing ) for (?C expected
         40  recursive call could loop indefinitely
         41  unrecognized character after (?P
         42  syntax error in subpattern name (missing terminator)
         43  two named subpatterns have the same name
         44  invalid UTF-8 string
         45  support for \P, \p, and \X has not been compiled
         46  malformed \P or \p sequence
         47  unknown property name after \P or \p
         48  subpattern name is too long (maximum 32 characters)
         49  too many named subpatterns (maximum 10,000)
         50  repeated subpattern is too long
         51  octal value is greater than \377 (not in UTF-8 mode)
         52  internal error: overran compiling workspace
         53   internal  error:  previously-checked  referenced  subpattern not
       found
         54  DEFINE group contains more than one branch
         55  repeating a DEFINE group is not allowed
         56  inconsistent NEWLINE options"


STUDYING A PATTERN

       pcre_extra *pcre_study(const pcre *code, int options
            const char **errptr);

       If a compiled pattern is going to be used several times,  it  is  worth
       spending more time analyzing it in order to speed up the time taken for
       matching. The function pcre_study() takes a pointer to a compiled  pat-
       tern as its first argument. If studying the pattern produces additional
       information that will help speed up matching,  pcre_study()  returns  a
       pointer  to a pcre_extra block, in which the study_data field points to
       the results of the study.

       The  returned  value  from  pcre_study()  can  be  passed  directly  to
       pcre_exec().  However,  a  pcre_extra  block also contains other fields
       that can be set by the caller before the block  is  passed;  these  are
       described below in the section on matching a pattern.

       If  studying  the  pattern  does not produce any additional information
       pcre_study() returns NULL. In that circumstance, if the calling program
       wants  to  pass  any of the other fields to pcre_exec(), it must set up
       its own pcre_extra block.

       The second argument of pcre_study() contains option bits.  At  present,
       no options are defined, and this argument should always be zero.

       The  third argument for pcre_study() is a pointer for an error message.
       If studying succeeds (even if no data is  returned),  the  variable  it
       points  to  is  set  to NULL. Otherwise it is set to point to a textual
       error message. This is a static string that is part of the library. You
       must  not  try  to  free it. You should test the error pointer for NULL
       after calling pcre_study(), to be sure that it has run successfully.

       This is a typical call to pcre_study():

         pcre_extra *pe;
         pe = pcre_study(
           re,             /* result of pcre_compile() */
           0,              /* no options exist */
           &error);        /* set to NULL or points to a message */

       At present, studying a pattern is useful only for non-anchored patterns
       that  do not have a single fixed starting character. A bitmap of possi-
       ble starting bytes is created.


LOCALE SUPPORT

       PCRE handles caseless matching, and determines whether  characters  are
       letters,  digits, or whatever, by reference to a set of tables, indexed
       by character value. When running in UTF-8 mode, this  applies  only  to
       characters  with  codes  less than 128. Higher-valued codes never match
       escapes such as \w or \d, but can be tested with \p if  PCRE  is  built
       with  Unicode  character property support. The use of locales with Uni-
       code is discouraged. If you are handling characters with codes  greater
       than  128, you should either use UTF-8 and Unicode, or use locales, but
       not try to mix the two.

       PCRE contains an internal set of tables that are used  when  the  final
       argument  of  pcre_compile()  is  NULL.  These  are sufficient for many
       applications.  Normally, the internal tables recognize only ASCII char-
       acters. However, when PCRE is built, it is possible to cause the inter-
       nal tables to be rebuilt in the default "C" locale of the local system,
       which may cause them to be different.

       The  internal tables can always be overridden by tables supplied by the
       application that calls PCRE. These may be created in a different locale
       from  the  default.  As more and more applications change to using Uni-
       code, the need for this locale support is expected to die away.

       External tables are built by calling  the  pcre_maketables()  function,
       which  has no arguments, in the relevant locale. The result can then be
       passed to pcre_compile() or pcre_exec()  as  often  as  necessary.  For
       example,  to  build  and use tables that are appropriate for the French
       locale (where accented characters with  values  greater  than  128  are
       treated as letters), the following code could be used:

         setlocale(LC_CTYPE, "fr_FR");
         tables = pcre_maketables();
         re = pcre_compile(..., tables);

       The  locale  name "fr_FR" is used on Linux and other Unix-like systems;
       if you are using Windows, the name for the French locale is "french".

       When pcre_maketables() runs, the tables are built  in  memory  that  is
       obtained  via  pcre_malloc. It is the caller's responsibility to ensure
       that the memory containing the tables remains available for as long  as
       it is needed.

       The pointer that is passed to pcre_compile() is saved with the compiled
       pattern, and the same tables are used via this pointer by  pcre_study()
       and normally also by pcre_exec(). Thus, by default, for any single pat-
       tern, compilation, studying and matching all happen in the same locale,
       but different patterns can be compiled in different locales.

       It  is  possible to pass a table pointer or NULL (indicating the use of
       the internal tables) to pcre_exec(). Although  not  intended  for  this
       purpose,  this facility could be used to match a pattern in a different
       locale from the one in which it was compiled. Passing table pointers at
       run time is discussed below in the section on matching a pattern.


INFORMATION ABOUT A PATTERN

       int pcre_fullinfo(const pcre *code, const pcre_extra *extra,
            int what, void *where);

       The  pcre_fullinfo() function returns information about a compiled pat-
       tern. It replaces the obsolete pcre_info() function, which is neverthe-
       less retained for backwards compability (and is documented below).

       The  first  argument  for  pcre_fullinfo() is a pointer to the compiled
       pattern. The second argument is the result of pcre_study(), or NULL  if
       the  pattern  was not studied. The third argument specifies which piece
       of information is required, and the fourth argument is a pointer  to  a
       variable  to  receive  the  data. The yield of the function is zero for
       success, or one of the following negative numbers:

         PCRE_ERROR_NULL       the argument code was NULL
                               the argument where was NULL
         PCRE_ERROR_BADMAGIC   the "magic number" was not found
         PCRE_ERROR_BADOPTION  the value of what was invalid

       The "magic number" is placed at the start of each compiled  pattern  as
       an  simple check against passing an arbitrary memory pointer. Here is a
       typical call of pcre_fullinfo(), to obtain the length of  the  compiled
       pattern:

         int rc;
         size_t length;
         rc = pcre_fullinfo(
           re,               /* result of pcre_compile() */
           pe,               /* result of pcre_study(), or NULL */
           PCRE_INFO_SIZE,   /* what is required */
           &length);         /* where to put the data */

       The  possible  values for the third argument are defined in pcre.h, and
       are as follows:

         PCRE_INFO_BACKREFMAX

       Return the number of the highest back reference  in  the  pattern.  The
       fourth  argument  should  point to an int variable. Zero is returned if
       there are no back references.

         PCRE_INFO_CAPTURECOUNT

       Return the number of capturing subpatterns in the pattern.  The  fourth
       argument should point to an int variable.

         PCRE_INFO_DEFAULT_TABLES

       Return  a pointer to the internal default character tables within PCRE.
       The fourth argument should point to an unsigned char *  variable.  This
       information call is provided for internal use by the pcre_study() func-
       tion. External callers can cause PCRE to use  its  internal  tables  by
       passing a NULL table pointer.

         PCRE_INFO_FIRSTBYTE

       Return  information  about  the first byte of any matched string, for a
       non-anchored pattern. The fourth argument should point to an int  vari-
       able.  (This option used to be called PCRE_INFO_FIRSTCHAR; the old name
       is still recognized for backwards compatibility.)

       If there is a fixed first byte, for example, from  a  pattern  such  as
       (cat|cow|coyote), its value is returned. Otherwise, if either

       (a)  the pattern was compiled with the PCRE_MULTILINE option, and every
       branch starts with "^", or

       (b) every branch of the pattern starts with ".*" and PCRE_DOTALL is not
       set (if it were set, the pattern would be anchored),

       -1  is  returned, indicating that the pattern matches only at the start
       of a subject string or after any newline within the  string.  Otherwise
       -2 is returned. For anchored patterns, -2 is returned.

         PCRE_INFO_FIRSTTABLE

       If  the pattern was studied, and this resulted in the construction of a
       256-bit table indicating a fixed set of bytes for the first byte in any
       matching  string, a pointer to the table is returned. Otherwise NULL is
       returned. The fourth argument should point to an unsigned char *  vari-
       able.

         PCRE_INFO_LASTLITERAL

       Return  the  value of the rightmost literal byte that must exist in any
       matched string, other than at its  start,  if  such  a  byte  has  been
       recorded. The fourth argument should point to an int variable. If there
       is no such byte, -1 is returned. For anchored patterns, a last  literal
       byte  is  recorded only if it follows something of variable length. For
       example, for the pattern /^a\d+z\d+/ the returned value is "z", but for
       /^a\dz\d/ the returned value is -1.

         PCRE_INFO_NAMECOUNT
         PCRE_INFO_NAMEENTRYSIZE
         PCRE_INFO_NAMETABLE

       PCRE  supports the use of named as well as numbered capturing parenthe-
       ses. The names are just an additional way of identifying the  parenthe-
       ses, which still acquire numbers. Several convenience functions such as
       pcre_get_named_substring() are provided for  extracting  captured  sub-
       strings  by  name. It is also possible to extract the data directly, by
       first converting the name to a number in order to  access  the  correct
       pointers in the output vector (described with pcre_exec() below). To do
       the conversion, you need  to  use  the  name-to-number  map,  which  is
       described by these three values.

       The map consists of a number of fixed-size entries. PCRE_INFO_NAMECOUNT
       gives the number of entries, and PCRE_INFO_NAMEENTRYSIZE gives the size
       of  each  entry;  both  of  these  return  an int value. The entry size
       depends on the length of the longest name. PCRE_INFO_NAMETABLE  returns
       a  pointer  to  the  first  entry of the table (a pointer to char). The
       first two bytes of each entry are the number of the capturing parenthe-
       sis,  most  significant byte first. The rest of the entry is the corre-
       sponding name, zero terminated. The names are  in  alphabetical  order.
       When PCRE_DUPNAMES is set, duplicate names are in order of their paren-
       theses numbers. For example, consider  the  following  pattern  (assume
       PCRE_EXTENDED  is  set,  so  white  space  -  including  newlines  - is
       ignored):

         (?<date> (?<year>(\d\d)?\d\d) -
         (?<month>\d\d) - (?<day>\d\d) )

       There are four named subpatterns, so the table has  four  entries,  and
       each  entry  in the table is eight bytes long. The table is as follows,
       with non-printing bytes shows in hexadecimal, and undefined bytes shown
       as ??:

         00 01 d  a  t  e  00 ??
         00 05 d  a  y  00 ?? ??
         00 04 m  o  n  t  h  00
         00 02 y  e  a  r  00 ??

       When  writing  code  to  extract  data from named subpatterns using the
       name-to-number map, remember that the length of the entries  is  likely
       to be different for each compiled pattern.

         PCRE_INFO_OPTIONS

       Return  a  copy of the options with which the pattern was compiled. The
       fourth argument should point to an unsigned long  int  variable.  These
       option bits are those specified in the call to pcre_compile(), modified
       by any top-level option settings within the pattern itself.

       A pattern is automatically anchored by PCRE if  all  of  its  top-level
       alternatives begin with one of the following:

         ^     unless PCRE_MULTILINE is set
         \A    always
         \G    always
         .*    if PCRE_DOTALL is set and there are no back
                 references to the subpattern in which .* appears

       For such patterns, the PCRE_ANCHORED bit is set in the options returned
       by pcre_fullinfo().

         PCRE_INFO_SIZE

       Return the size of the compiled pattern, that is, the  value  that  was
       passed as the argument to pcre_malloc() when PCRE was getting memory in
       which to place the compiled data. The fourth argument should point to a
       size_t variable.

         PCRE_INFO_STUDYSIZE

       Return the size of the data block pointed to by the study_data field in
       a pcre_extra block. That is,  it  is  the  value  that  was  passed  to
       pcre_malloc() when PCRE was getting memory into which to place the data
       created by pcre_study(). The fourth argument should point to  a  size_t
       variable.


OBSOLETE INFO FUNCTION

       int pcre_info(const pcre *code, int *optptr, int *firstcharptr);

       The  pcre_info()  function is now obsolete because its interface is too
       restrictive to return all the available data about a compiled  pattern.
       New   programs   should  use  pcre_fullinfo()  instead.  The  yield  of
       pcre_info() is the number of capturing subpatterns, or one of the  fol-
       lowing negative numbers:

         PCRE_ERROR_NULL       the argument code was NULL
         PCRE_ERROR_BADMAGIC   the "magic number" was not found

       If  the  optptr  argument is not NULL, a copy of the options with which
       the pattern was compiled is placed in the integer  it  points  to  (see
       PCRE_INFO_OPTIONS above).

       If  the  pattern  is  not anchored and the firstcharptr argument is not
       NULL, it is used to pass back information about the first character  of
       any matched string (see PCRE_INFO_FIRSTBYTE above).


REFERENCE COUNTS

       int pcre_refcount(pcre *code, int adjust);

       The  pcre_refcount()  function is used to maintain a reference count in
       the data block that contains a compiled pattern. It is provided for the
       benefit  of  applications  that  operate  in an object-oriented manner,
       where different parts of the application may be using the same compiled
       pattern, but you want to free the block when they are all done.

       When a pattern is compiled, the reference count field is initialized to
       zero.  It is changed only by calling this function, whose action is  to
       add  the  adjust  value  (which may be positive or negative) to it. The
       yield of the function is the new value. However, the value of the count
       is  constrained to lie between 0 and 65535, inclusive. If the new value
       is outside these limits, it is forced to the appropriate limit value.

       Except when it is zero, the reference count is not correctly  preserved
       if  a  pattern  is  compiled on one host and then transferred to a host
       whose byte-order is different. (This seems a highly unlikely scenario.)


MATCHING A PATTERN: THE TRADITIONAL FUNCTION

       int pcre_exec(const pcre *code, const pcre_extra *extra,
            const char *subject, int length, int startoffset,
            int options, int *ovector, int ovecsize);

       The  function pcre_exec() is called to match a subject string against a
       compiled pattern, which is passed in the code argument. If the  pattern
       has been studied, the result of the study should be passed in the extra
       argument. This function is the main matching facility of  the  library,
       and it operates in a Perl-like manner. For specialist use there is also
       an alternative matching function, which is described below in the  sec-
       tion about the pcre_dfa_exec() function.

       In  most applications, the pattern will have been compiled (and option-
       ally studied) in the same process that calls pcre_exec().  However,  it
       is possible to save compiled patterns and study data, and then use them
       later in different processes, possibly even on different hosts.  For  a
       discussion about this, see the pcreprecompile documentation.

       Here is an example of a simple call to pcre_exec():

         int rc;
         int ovector[30];
         rc = pcre_exec(
           re,             /* result of pcre_compile() */
           NULL,           /* we didn't study the pattern */
           "some string",  /* the subject string */
           11,             /* the length of the subject string */
           0,              /* start at offset 0 in the subject */
           0,              /* default options */
           ovector,        /* vector of integers for substring information */
           30);            /* number of elements (NOT size in bytes) */

   Extra data for pcre_exec()

       If  the  extra argument is not NULL, it must point to a pcre_extra data
       block. The pcre_study() function returns such a block (when it  doesn't
       return  NULL), but you can also create one for yourself, and pass addi-
       tional information in it. The pcre_extra block contains  the  following
       fields (not necessarily in this order):

         unsigned long int flags;
         void *study_data;
         unsigned long int match_limit;
         unsigned long int match_limit_recursion;
         void *callout_data;
         const unsigned char *tables;

       The  flags  field  is a bitmap that specifies which of the other fields
       are set. The flag bits are:

         PCRE_EXTRA_STUDY_DATA
         PCRE_EXTRA_MATCH_LIMIT
         PCRE_EXTRA_MATCH_LIMIT_RECURSION
         PCRE_EXTRA_CALLOUT_DATA
         PCRE_EXTRA_TABLES

       Other flag bits should be set to zero. The study_data field is  set  in
       the  pcre_extra  block  that is returned by pcre_study(), together with
       the appropriate flag bit. You should not set this yourself, but you may
       add  to  the  block by setting the other fields and their corresponding
       flag bits.

       The match_limit field provides a means of preventing PCRE from using up
       a  vast amount of resources when running patterns that are not going to
       match, but which have a very large number  of  possibilities  in  their
       search  trees.  The  classic  example  is  the  use of nested unlimited
       repeats.

       Internally, PCRE uses a function called match() which it calls  repeat-
       edly  (sometimes  recursively). The limit set by match_limit is imposed
       on the number of times this function is called during  a  match,  which
       has  the  effect  of  limiting the amount of backtracking that can take
       place. For patterns that are not anchored, the count restarts from zero
       for each position in the subject string.

       The  default  value  for  the  limit can be set when PCRE is built; the
       default default is 10 million, which handles all but the  most  extreme
       cases.  You  can  override  the  default by suppling pcre_exec() with a
       pcre_extra    block    in    which    match_limit    is    set,     and
       PCRE_EXTRA_MATCH_LIMIT  is  set  in  the  flags  field. If the limit is
       exceeded, pcre_exec() returns PCRE_ERROR_MATCHLIMIT.

       The match_limit_recursion field is similar to match_limit, but  instead
       of limiting the total number of times that match() is called, it limits
       the depth of recursion. The recursion depth is a  smaller  number  than
       the  total number of calls, because not all calls to match() are recur-
       sive.  This limit is of use only if it is set smaller than match_limit.

       Limiting  the  recursion  depth  limits the amount of stack that can be
       used, or, when PCRE has been compiled to use memory on the heap instead
       of the stack, the amount of heap memory that can be used.

       The  default  value  for  match_limit_recursion can be set when PCRE is
       built; the default default  is  the  same  value  as  the  default  for
       match_limit.  You can override the default by suppling pcre_exec() with
       a  pcre_extra  block  in  which  match_limit_recursion  is   set,   and
       PCRE_EXTRA_MATCH_LIMIT_RECURSION  is  set  in  the  flags field. If the
       limit is exceeded, pcre_exec() returns PCRE_ERROR_RECURSIONLIMIT.

       The pcre_callout field is used in conjunction with the  "callout"  fea-
       ture, which is described in the pcrecallout documentation.

       The  tables  field  is  used  to  pass  a  character  tables pointer to
       pcre_exec(); this overrides the value that is stored with the  compiled
       pattern.  A  non-NULL value is stored with the compiled pattern only if
       custom tables were supplied to pcre_compile() via  its  tableptr  argu-
       ment.  If NULL is passed to pcre_exec() using this mechanism, it forces
       PCRE's internal tables to be used. This facility is  helpful  when  re-
       using  patterns  that  have been saved after compiling with an external
       set of tables, because the external tables  might  be  at  a  different
       address  when  pcre_exec() is called. See the pcreprecompile documenta-
       tion for a discussion of saving compiled patterns for later use.

   Option bits for pcre_exec()

       The unused bits of the options argument for pcre_exec() must  be  zero.
       The  only  bits  that  may  be set are PCRE_ANCHORED, PCRE_NEWLINE_xxx,
       PCRE_NOTBOL,   PCRE_NOTEOL,   PCRE_NOTEMPTY,   PCRE_NO_UTF8_CHECK   and
       PCRE_PARTIAL.

         PCRE_ANCHORED

       The  PCRE_ANCHORED  option  limits pcre_exec() to matching at the first
       matching position. If a pattern was  compiled  with  PCRE_ANCHORED,  or
       turned  out to be anchored by virtue of its contents, it cannot be made
       unachored at matching time.

         PCRE_NEWLINE_CR
         PCRE_NEWLINE_LF
         PCRE_NEWLINE_CRLF
         PCRE_NEWLINE_ANYCRLF
         PCRE_NEWLINE_ANY

       These options override  the  newline  definition  that  was  chosen  or
       defaulted  when the pattern was compiled. For details, see the descrip-
       tion of pcre_compile()  above.  During  matching,  the  newline  choice
       affects  the  behaviour  of the dot, circumflex, and dollar metacharac-
       ters. It may also alter the way the match position is advanced after  a
       match  failure  for  an  unanchored  pattern.  When  PCRE_NEWLINE_CRLF,
       PCRE_NEWLINE_ANYCRLF, or PCRE_NEWLINE_ANY is set, and a  match  attempt
       fails  when the current position is at a CRLF sequence, the match posi-
       tion is advanced by two characters instead of one, in other  words,  to
       after the CRLF.

         PCRE_NOTBOL

       This option specifies that first character of the subject string is not
       the beginning of a line, so the  circumflex  metacharacter  should  not
       match  before it. Setting this without PCRE_MULTILINE (at compile time)
       causes circumflex never to match. This option affects only  the  behav-
       iour of the circumflex metacharacter. It does not affect \A.

         PCRE_NOTEOL

       This option specifies that the end of the subject string is not the end
       of a line, so the dollar metacharacter should not match it nor  (except
       in  multiline mode) a newline immediately before it. Setting this with-
       out PCRE_MULTILINE (at compile time) causes dollar never to match. This
       option  affects only the behaviour of the dollar metacharacter. It does
       not affect \Z or \z.

         PCRE_NOTEMPTY

       An empty string is not considered to be a valid match if this option is
       set.  If  there are alternatives in the pattern, they are tried. If all
       the alternatives match the empty string, the entire  match  fails.  For
       example, if the pattern

         a?b?

       is  applied  to  a string not beginning with "a" or "b", it matches the
       empty string at the start of the subject. With PCRE_NOTEMPTY set,  this
       match is not valid, so PCRE searches further into the string for occur-
       rences of "a" or "b".

       Perl has no direct equivalent of PCRE_NOTEMPTY, but it does make a spe-
       cial  case  of  a  pattern match of the empty string within its split()
       function, and when using the /g modifier. It  is  possible  to  emulate
       Perl's behaviour after matching a null string by first trying the match
       again at the same offset with PCRE_NOTEMPTY and PCRE_ANCHORED, and then
       if  that  fails by advancing the starting offset (see below) and trying
       an ordinary match again. There is some code that demonstrates how to do
       this in the pcredemo.c sample program.

         PCRE_NO_UTF8_CHECK

       When PCRE_UTF8 is set at compile time, the validity of the subject as a
       UTF-8 string is automatically checked when pcre_exec() is  subsequently
       called.   The  value  of  startoffset is also checked to ensure that it
       points to the start of a UTF-8 character. If an invalid UTF-8  sequence
       of bytes is found, pcre_exec() returns the error PCRE_ERROR_BADUTF8. If
       startoffset contains an  invalid  value,  PCRE_ERROR_BADUTF8_OFFSET  is
       returned.

       If  you  already  know that your subject is valid, and you want to skip
       these   checks   for   performance   reasons,   you   can    set    the
       PCRE_NO_UTF8_CHECK  option  when calling pcre_exec(). You might want to
       do this for the second and subsequent calls to pcre_exec() if  you  are
       making  repeated  calls  to  find  all  the matches in a single subject
       string. However, you should be  sure  that  the  value  of  startoffset
       points  to  the  start of a UTF-8 character. When PCRE_NO_UTF8_CHECK is
       set, the effect of passing an invalid UTF-8 string as a subject,  or  a
       value  of startoffset that does not point to the start of a UTF-8 char-
       acter, is undefined. Your program may crash.

         PCRE_PARTIAL

       This option turns on the  partial  matching  feature.  If  the  subject
       string  fails to match the pattern, but at some point during the match-
       ing process the end of the subject was reached (that  is,  the  subject
       partially  matches  the  pattern and the failure to match occurred only
       because there were not enough subject characters), pcre_exec()  returns
       PCRE_ERROR_PARTIAL  instead of PCRE_ERROR_NOMATCH. When PCRE_PARTIAL is
       used, there are restrictions on what may appear in the  pattern.  These
       are discussed in the pcrepartial documentation.

   The string to be matched by pcre_exec()

       The  subject string is passed to pcre_exec() as a pointer in subject, a
       length in length, and a starting byte offset in startoffset.  In  UTF-8
       mode,  the  byte  offset  must point to the start of a UTF-8 character.
       Unlike the pattern string, the subject may contain binary  zero  bytes.
       When  the starting offset is zero, the search for a match starts at the
       beginning of the subject, and this is by far the most common case.

       A non-zero starting offset is useful when searching for  another  match
       in  the same subject by calling pcre_exec() again after a previous suc-
       cess.  Setting startoffset differs from just passing over  a  shortened
       string  and  setting  PCRE_NOTBOL  in the case of a pattern that begins
       with any kind of lookbehind. For example, consider the pattern

         \Biss\B

       which finds occurrences of "iss" in the middle of  words.  (\B  matches
       only  if  the  current position in the subject is not a word boundary.)
       When applied to the string "Mississipi" the first call  to  pcre_exec()
       finds  the  first  occurrence. If pcre_exec() is called again with just
       the remainder of the subject,  namely  "issipi",  it  does  not  match,
       because \B is always false at the start of the subject, which is deemed
       to be a word boundary. However, if pcre_exec()  is  passed  the  entire
       string again, but with startoffset set to 4, it finds the second occur-
       rence of "iss" because it is able to look behind the starting point  to
       discover that it is preceded by a letter.

       If  a  non-zero starting offset is passed when the pattern is anchored,
       one attempt to match at the given offset is made. This can only succeed
       if  the  pattern  does  not require the match to be at the start of the
       subject.

   How pcre_exec() returns captured substrings

       In general, a pattern matches a certain portion of the subject, and  in
       addition,  further  substrings  from  the  subject may be picked out by
       parts of the pattern. Following the usage  in  Jeffrey  Friedl's  book,
       this  is  called "capturing" in what follows, and the phrase "capturing
       subpattern" is used for a fragment of a pattern that picks out  a  sub-
       string.  PCRE  supports several other kinds of parenthesized subpattern
       that do not cause substrings to be captured.

       Captured substrings are returned to the caller via a vector of  integer
       offsets  whose  address is passed in ovector. The number of elements in
       the vector is passed in ovecsize, which must be a non-negative  number.
       Note: this argument is NOT the size of ovector in bytes.

       The  first  two-thirds of the vector is used to pass back captured sub-
       strings, each substring using a pair of integers. The  remaining  third
       of  the  vector is used as workspace by pcre_exec() while matching cap-
       turing subpatterns, and is not available for passing back  information.
       The  length passed in ovecsize should always be a multiple of three. If
       it is not, it is rounded down.

       When a match is successful, information about  captured  substrings  is
       returned  in  pairs  of integers, starting at the beginning of ovector,
       and continuing up to two-thirds of its length at the  most.  The  first
       element of a pair is set to the offset of the first character in a sub-
       string, and the second is set to the  offset  of  the  first  character
       after  the  end  of  a  substring. The first pair, ovector[0] and ovec-
       tor[1], identify the portion of  the  subject  string  matched  by  the
       entire  pattern.  The next pair is used for the first capturing subpat-
       tern, and so on. The value returned by pcre_exec() is one more than the
       highest numbered pair that has been set. For example, if two substrings
       have been captured, the returned value is 3. If there are no  capturing
       subpatterns,  the return value from a successful match is 1, indicating
       that just the first pair of offsets has been set.

       If a capturing subpattern is matched repeatedly, it is the last portion
       of the string that it matched that is returned.

       If  the vector is too small to hold all the captured substring offsets,
       it is used as far as possible (up to two-thirds of its length), and the
       function  returns a value of zero. In particular, if the substring off-
       sets are not of interest, pcre_exec() may be called with ovector passed
       as  NULL  and  ovecsize  as zero. However, if the pattern contains back
       references and the ovector is not big enough to  remember  the  related
       substrings,  PCRE has to get additional memory for use during matching.
       Thus it is usually advisable to supply an ovector.

       The pcre_info() function can be used to find  out  how  many  capturing
       subpatterns  there  are  in  a  compiled pattern. The smallest size for
       ovector that will allow for n captured substrings, in addition  to  the
       offsets of the substring matched by the whole pattern, is (n+1)*3.

       It  is  possible for capturing subpattern number n+1 to match some part
       of the subject when subpattern n has not been used at all. For example,
       if  the  string  "abc"  is  matched against the pattern (a|(z))(bc) the
       return from the function is 4, and subpatterns 1 and 3 are matched, but
       2  is  not.  When  this happens, both values in the offset pairs corre-
       sponding to unused subpatterns are set to -1.

       Offset values that correspond to unused subpatterns at the end  of  the
       expression  are  also  set  to  -1. For example, if the string "abc" is
       matched against the pattern (abc)(x(yz)?)? subpatterns 2 and 3 are  not
       matched.  The  return  from the function is 2, because the highest used
       capturing subpattern number is 1. However, you can refer to the offsets
       for  the  second  and third capturing subpatterns if you wish (assuming
       the vector is large enough, of course).

       Some convenience functions are provided  for  extracting  the  captured
       substrings as separate strings. These are described below.

   Error return values from pcre_exec()

       If  pcre_exec()  fails, it returns a negative number. The following are
       defined in the header file:

         PCRE_ERROR_NOMATCH        (-1)

       The subject string did not match the pattern.

         PCRE_ERROR_NULL           (-2)

       Either code or subject was passed as NULL,  or  ovector  was  NULL  and
       ovecsize was not zero.

         PCRE_ERROR_BADOPTION      (-3)

       An unrecognized bit was set in the options argument.

         PCRE_ERROR_BADMAGIC       (-4)

       PCRE  stores a 4-byte "magic number" at the start of the compiled code,
       to catch the case when it is passed a junk pointer and to detect when a
       pattern that was compiled in an environment of one endianness is run in
       an environment with the other endianness. This is the error  that  PCRE
       gives when the magic number is not present.

         PCRE_ERROR_UNKNOWN_OPCODE (-5)

       While running the pattern match, an unknown item was encountered in the
       compiled pattern. This error could be caused by a bug  in  PCRE  or  by
       overwriting of the compiled pattern.

         PCRE_ERROR_NOMEMORY       (-6)

       If  a  pattern contains back references, but the ovector that is passed
       to pcre_exec() is not big enough to remember the referenced substrings,
       PCRE  gets  a  block of memory at the start of matching to use for this
       purpose. If the call via pcre_malloc() fails, this error is given.  The
       memory is automatically freed at the end of matching.

         PCRE_ERROR_NOSUBSTRING    (-7)

       This  error is used by the pcre_copy_substring(), pcre_get_substring(),
       and  pcre_get_substring_list()  functions  (see  below).  It  is  never
       returned by pcre_exec().

         PCRE_ERROR_MATCHLIMIT     (-8)

       The  backtracking  limit,  as  specified  by the match_limit field in a
       pcre_extra structure (or defaulted) was reached.  See  the  description
       above.

         PCRE_ERROR_CALLOUT        (-9)

       This error is never generated by pcre_exec() itself. It is provided for
       use by callout functions that want to yield a distinctive  error  code.
       See the pcrecallout documentation for details.

         PCRE_ERROR_BADUTF8        (-10)

       A  string  that contains an invalid UTF-8 byte sequence was passed as a
       subject.

         PCRE_ERROR_BADUTF8_OFFSET (-11)

       The UTF-8 byte sequence that was passed as a subject was valid, but the
       value  of startoffset did not point to the beginning of a UTF-8 charac-
       ter.

         PCRE_ERROR_PARTIAL        (-12)

       The subject string did not match, but it did match partially.  See  the
       pcrepartial documentation for details of partial matching.

         PCRE_ERROR_BADPARTIAL     (-13)

       The  PCRE_PARTIAL  option  was  used with a compiled pattern containing
       items that are not supported for partial matching. See the  pcrepartial
       documentation for details of partial matching.

         PCRE_ERROR_INTERNAL       (-14)

       An  unexpected  internal error has occurred. This error could be caused
       by a bug in PCRE or by overwriting of the compiled pattern.

         PCRE_ERROR_BADCOUNT       (-15)

       This error is given if the value of the ovecsize argument is  negative.

         PCRE_ERROR_RECURSIONLIMIT (-21)

       The internal recursion limit, as specified by the match_limit_recursion
       field in a pcre_extra structure (or defaulted)  was  reached.  See  the
       description above.

         PCRE_ERROR_NULLWSLIMIT    (-22)

       When  a  group  that  can  match an empty substring is repeated with an
       unbounded upper limit, the subject position at the start of  the  group
       must be remembered, so that a test for an empty string can be made when
       the end of the group is reached. Some workspace is required  for  this;
       if it runs out, this error is given.

         PCRE_ERROR_BADNEWLINE     (-23)

       An invalid combination of PCRE_NEWLINE_xxx options was given.

       Error numbers -16 to -20 are not used by pcre_exec().


EXTRACTING CAPTURED SUBSTRINGS BY NUMBER

       int pcre_copy_substring(const char *subject, int *ovector,
            int stringcount, int stringnumber, char *buffer,
            int buffersize);

       int pcre_get_substring(const char *subject, int *ovector,
            int stringcount, int stringnumber,
            const char **stringptr);

       int pcre_get_substring_list(const char *subject,
            int *ovector, int stringcount, const char ***listptr);

       Captured  substrings  can  be  accessed  directly  by using the offsets
       returned by pcre_exec() in  ovector.  For  convenience,  the  functions
       pcre_copy_substring(),    pcre_get_substring(),    and    pcre_get_sub-
       string_list() are provided for extracting captured substrings  as  new,
       separate,  zero-terminated strings. These functions identify substrings
       by number. The next section describes functions  for  extracting  named
       substrings.

       A  substring that contains a binary zero is correctly extracted and has
       a further zero added on the end, but the result is not, of course, a  C
       string.   However,  you  can  process such a string by referring to the
       length that is  returned  by  pcre_copy_substring()  and  pcre_get_sub-
       string().  Unfortunately, the interface to pcre_get_substring_list() is
       not adequate for handling strings containing binary zeros, because  the
       end of the final string is not independently indicated.

       The  first  three  arguments  are the same for all three of these func-
       tions: subject is the subject string that has  just  been  successfully
       matched, ovector is a pointer to the vector of integer offsets that was
       passed to pcre_exec(), and stringcount is the number of substrings that
       were  captured  by  the match, including the substring that matched the
       entire regular expression. This is the value returned by pcre_exec() if
       it  is greater than zero. If pcre_exec() returned zero, indicating that
       it ran out of space in ovector, the value passed as stringcount  should
       be the number of elements in the vector divided by three.

       The  functions pcre_copy_substring() and pcre_get_substring() extract a
       single substring, whose number is given as  stringnumber.  A  value  of
       zero  extracts  the  substring that matched the entire pattern, whereas
       higher values  extract  the  captured  substrings.  For  pcre_copy_sub-
       string(),  the  string  is  placed  in buffer, whose length is given by
       buffersize, while for pcre_get_substring() a new  block  of  memory  is
       obtained  via  pcre_malloc,  and its address is returned via stringptr.
       The yield of the function is the length of the  string,  not  including
       the terminating zero, or one of these error codes:

         PCRE_ERROR_NOMEMORY       (-6)

       The  buffer  was too small for pcre_copy_substring(), or the attempt to
       get memory failed for pcre_get_substring().

         PCRE_ERROR_NOSUBSTRING    (-7)

       There is no substring whose number is stringnumber.

       The pcre_get_substring_list()  function  extracts  all  available  sub-
       strings  and  builds  a list of pointers to them. All this is done in a
       single block of memory that is obtained via pcre_malloc. The address of
       the  memory  block  is returned via listptr, which is also the start of
       the list of string pointers. The end of the list is marked  by  a  NULL
       pointer.  The  yield  of  the function is zero if all went well, or the
       error code

         PCRE_ERROR_NOMEMORY       (-6)

       if the attempt to get the memory block failed.

       When any of these functions encounter a substring that is unset,  which
       can  happen  when  capturing subpattern number n+1 matches some part of
       the subject, but subpattern n has not been used at all, they return  an
       empty string. This can be distinguished from a genuine zero-length sub-
       string by inspecting the appropriate offset in ovector, which is  nega-
       tive for unset substrings.

       The  two convenience functions pcre_free_substring() and pcre_free_sub-
       string_list() can be used to free the memory  returned  by  a  previous
       call  of  pcre_get_substring()  or  pcre_get_substring_list(),  respec-
       tively. They do nothing more than  call  the  function  pointed  to  by
       pcre_free,  which  of course could be called directly from a C program.
       However, PCRE is used in some situations where it is linked via a  spe-
       cial   interface  to  another  programming  language  that  cannot  use
       pcre_free directly; it is for these cases that the functions  are  pro-
       vided.


EXTRACTING CAPTURED SUBSTRINGS BY NAME

       int pcre_get_stringnumber(const pcre *code,
            const char *name);

       int pcre_copy_named_substring(const pcre *code,
            const char *subject, int *ovector,
            int stringcount, const char *stringname,
            char *buffer, int buffersize);

       int pcre_get_named_substring(const pcre *code,
            const char *subject, int *ovector,
            int stringcount, const char *stringname,
            const char **stringptr);

       To  extract a substring by name, you first have to find associated num-
       ber.  For example, for this pattern

         (a+)b(?<xxx>\d+)...

       the number of the subpattern called "xxx" is 2. If the name is known to
       be unique (PCRE_DUPNAMES was not set), you can find the number from the
       name by calling pcre_get_stringnumber(). The first argument is the com-
       piled pattern, and the second is the name. The yield of the function is
       the subpattern number, or PCRE_ERROR_NOSUBSTRING (-7) if  there  is  no
       subpattern of that name.

       Given the number, you can extract the substring directly, or use one of
       the functions described in the previous section. For convenience, there
       are also two functions that do the whole job.

       Most    of    the    arguments   of   pcre_copy_named_substring()   and
       pcre_get_named_substring() are the same  as  those  for  the  similarly
       named  functions  that extract by number. As these are described in the
       previous section, they are not re-described here. There  are  just  two
       differences:

       First,  instead  of a substring number, a substring name is given. Sec-
       ond, there is an extra argument, given at the start, which is a pointer
       to  the compiled pattern. This is needed in order to gain access to the
       name-to-number translation table.

       These functions call pcre_get_stringnumber(), and if it succeeds,  they
       then  call  pcre_copy_substring() or pcre_get_substring(), as appropri-
       ate. NOTE: If PCRE_DUPNAMES is set and there are duplicate  names,  the
       behaviour may not be what you want (see the next section).


DUPLICATE SUBPATTERN NAMES

       int pcre_get_stringtable_entries(const pcre *code,
            const char *name, char **first, char **last);

       When  a  pattern  is  compiled with the PCRE_DUPNAMES option, names for
       subpatterns are not required to  be  unique.  Normally,  patterns  with
       duplicate  names  are such that in any one match, only one of the named
       subpatterns participates. An example is shown in the pcrepattern  docu-
       mentation. When duplicates are present, pcre_copy_named_substring() and
       pcre_get_named_substring() return the first substring corresponding  to
       the  given  name  that  is  set.  If  none  are set, an empty string is
       returned.  The pcre_get_stringnumber() function returns one of the num-
       bers  that are associated with the name, but it is not defined which it
       is.

       If you want to get full details of all captured substrings for a  given
       name,  you  must  use  the pcre_get_stringtable_entries() function. The
       first argument is the compiled pattern, and the second is the name. The
       third  and  fourth  are  pointers to variables which are updated by the
       function. After it has run, they point to the first and last entries in
       the  name-to-number  table  for  the  given  name.  The function itself
       returns the length of each entry,  or  PCRE_ERROR_NOSUBSTRING  (-7)  if
       there  are none. The format of the table is described above in the sec-
       tion entitled Information about a  pattern.   Given  all  the  relevant
       entries  for the name, you can extract each of their numbers, and hence
       the captured data, if any.


FINDING ALL POSSIBLE MATCHES

       The traditional matching function uses a  similar  algorithm  to  Perl,
       which stops when it finds the first match, starting at a given point in
       the subject. If you want to find all possible matches, or  the  longest
       possible  match,  consider using the alternative matching function (see
       below) instead. If you cannot use the alternative function,  but  still
       need  to  find all possible matches, you can kludge it up by making use
       of the callout facility, which is described in the pcrecallout documen-
       tation.

       What you have to do is to insert a callout right at the end of the pat-
       tern.  When your callout function is called, extract and save the  cur-
       rent  matched  substring.  Then  return  1, which forces pcre_exec() to
       backtrack and try other alternatives. Ultimately, when it runs  out  of
       matches, pcre_exec() will yield PCRE_ERROR_NOMATCH.


MATCHING A PATTERN: THE ALTERNATIVE FUNCTION

       int pcre_dfa_exec(const pcre *code, const pcre_extra *extra,
            const char *subject, int length, int startoffset,
            int options, int *ovector, int ovecsize,
            int *workspace, int wscount);

       The  function  pcre_dfa_exec()  is  called  to  match  a subject string
       against a compiled pattern, using a matching algorithm that  scans  the
       subject  string  just  once, and does not backtrack. This has different
       characteristics to the normal algorithm, and  is  not  compatible  with
       Perl.  Some  of the features of PCRE patterns are not supported. Never-
       theless, there are times when this kind of matching can be useful.  For
       a discussion of the two matching algorithms, see the pcrematching docu-
       mentation.

       The arguments for the pcre_dfa_exec() function  are  the  same  as  for
       pcre_exec(), plus two extras. The ovector argument is used in a differ-
       ent way, and this is described below. The other  common  arguments  are
       used  in  the  same way as for pcre_exec(), so their description is not
       repeated here.

       The two additional arguments provide workspace for  the  function.  The
       workspace  vector  should  contain at least 20 elements. It is used for
       keeping  track  of  multiple  paths  through  the  pattern  tree.  More
       workspace  will  be  needed for patterns and subjects where there are a
       lot of potential matches.

       Here is an example of a simple call to pcre_dfa_exec():

         int rc;
         int ovector[10];
         int wspace[20];
         rc = pcre_dfa_exec(
           re,             /* result of pcre_compile() */
           NULL,           /* we didn't study the pattern */
           "some string",  /* the subject string */
           11,             /* the length of the subject string */
           0,              /* start at offset 0 in the subject */
           0,              /* default options */
           ovector,        /* vector of integers for substring information */
           10,             /* number of elements (NOT size in bytes) */
           wspace,         /* working space vector */
           20);            /* number of elements (NOT size in bytes) */

   Option bits for pcre_dfa_exec()

       The unused bits of the options argument  for  pcre_dfa_exec()  must  be
       zero.  The  only  bits  that  may  be  set are PCRE_ANCHORED, PCRE_NEW-
       LINE_xxx, PCRE_NOTBOL, PCRE_NOTEOL, PCRE_NOTEMPTY,  PCRE_NO_UTF8_CHECK,
       PCRE_PARTIAL, PCRE_DFA_SHORTEST, and PCRE_DFA_RESTART. All but the last
       three of these are the same as for pcre_exec(), so their description is
       not repeated here.

         PCRE_PARTIAL

       This  has  the  same general effect as it does for pcre_exec(), but the
       details  are  slightly  different.  When  PCRE_PARTIAL   is   set   for
       pcre_dfa_exec(),  the  return code PCRE_ERROR_NOMATCH is converted into
       PCRE_ERROR_PARTIAL if the end of the subject  is  reached,  there  have
       been no complete matches, but there is still at least one matching pos-
       sibility. The portion of the string that provided the partial match  is
       set as the first matching string.

         PCRE_DFA_SHORTEST

       Setting  the  PCRE_DFA_SHORTEST option causes the matching algorithm to
       stop as soon as it has found one match. Because of the way the alterna-
       tive  algorithm  works, this is necessarily the shortest possible match
       at the first possible matching point in the subject string.

         PCRE_DFA_RESTART

       When pcre_dfa_exec()  is  called  with  the  PCRE_PARTIAL  option,  and
       returns  a  partial  match, it is possible to call it again, with addi-
       tional subject characters, and have it continue with  the  same  match.
       The  PCRE_DFA_RESTART  option requests this action; when it is set, the
       workspace and wscount options must reference the same vector as  before
       because  data  about  the  match so far is left in them after a partial
       match. There is more discussion of this  facility  in  the  pcrepartial
       documentation.

   Successful returns from pcre_dfa_exec()

       When  pcre_dfa_exec()  succeeds, it may have matched more than one sub-
       string in the subject. Note, however, that all the matches from one run
       of  the  function  start  at the same point in the subject. The shorter
       matches are all initial substrings of the longer matches. For  example,
       if the pattern

         <.*>

       is matched against the string

         This is <something> <something else> <something further> no more

       the three matched strings are

         <something>
         <something> <something else>
         <something> <something else> <something further>

       On  success,  the  yield of the function is a number greater than zero,
       which is the number of matched substrings.  The  substrings  themselves
       are  returned  in  ovector. Each string uses two elements; the first is
       the offset to the start, and the second is the offset to  the  end.  In
       fact,  all  the  strings  have the same start offset. (Space could have
       been saved by giving this only once, but it was decided to retain  some
       compatibility  with  the  way pcre_exec() returns data, even though the
       meaning of the strings is different.)

       The strings are returned in reverse order of length; that is, the long-
       est  matching  string is given first. If there were too many matches to
       fit into ovector, the yield of the function is zero, and the vector  is
       filled with the longest matches.

   Error returns from pcre_dfa_exec()

       The  pcre_dfa_exec()  function returns a negative number when it fails.
       Many of the errors are the same  as  for  pcre_exec(),  and  these  are
       described  above.   There are in addition the following errors that are
       specific to pcre_dfa_exec():

         PCRE_ERROR_DFA_UITEM      (-16)

       This return is given if pcre_dfa_exec() encounters an item in the  pat-
       tern  that  it  does not support, for instance, the use of \C or a back
       reference.

         PCRE_ERROR_DFA_UCOND      (-17)

       This return is given if pcre_dfa_exec()  encounters  a  condition  item
       that  uses  a back reference for the condition, or a test for recursion
       in a specific group. These are not supported.

         PCRE_ERROR_DFA_UMLIMIT    (-18)

       This return is given if pcre_dfa_exec() is called with an  extra  block
       that contains a setting of the match_limit field. This is not supported
       (it is meaningless).

         PCRE_ERROR_DFA_WSSIZE     (-19)

       This return is given if  pcre_dfa_exec()  runs  out  of  space  in  the
       workspace vector.

         PCRE_ERROR_DFA_RECURSE    (-20)

       When  a  recursive subpattern is processed, the matching function calls
       itself recursively, using private vectors for  ovector  and  workspace.
       This  error  is  given  if  the output vector is not large enough. This
       should be extremely rare, as a vector of size 1000 is used.


SEE ALSO

       pcrebuild(3), pcrecallout(3), pcrecpp(3)(3), pcrematching(3),  pcrepar-
       tial(3),  pcreposix(3), pcreprecompile(3), pcresample(3), pcrestack(3).


AUTHOR

       Philip Hazel
       University Computing Service
       Cambridge CB2 3QH, England.


REVISION

       Last updated: 24 April 2007
       Copyright (c) 1997-2007 University of Cambridge.
------------------------------------------------------------------------------


PCRECALLOUT(3)                                                  PCRECALLOUT(3)


NAME
       PCRE - Perl-compatible regular expressions


PCRE CALLOUTS

       int (*pcre_callout)(pcre_callout_block *);

       PCRE provides a feature called "callout", which is a means of temporar-
       ily passing control to the caller of PCRE  in  the  middle  of  pattern
       matching.  The  caller of PCRE provides an external function by putting
       its entry point in the global variable pcre_callout. By  default,  this
       variable contains NULL, which disables all calling out.

       Within  a  regular  expression,  (?C) indicates the points at which the
       external function is to be called.  Different  callout  points  can  be
       identified  by  putting  a number less than 256 after the letter C. The
       default value is zero.  For  example,  this  pattern  has  two  callout
       points:

         (?C1)abc(?C2)def

       If  the  PCRE_AUTO_CALLOUT  option  bit  is  set when pcre_compile() is
       called, PCRE automatically  inserts  callouts,  all  with  number  255,
       before  each  item in the pattern. For example, if PCRE_AUTO_CALLOUT is
       used with the pattern

         A(\d{2}|--)

       it is processed as if it were

       (?C255)A(?C255)((?C255)\d{2}(?C255)|(?C255)-(?C255)-(?C255))(?C255)

       Notice that there is a callout before and after  each  parenthesis  and
       alternation  bar.  Automatic  callouts  can  be  used  for tracking the
       progress of pattern matching. The pcretest command has an  option  that
       sets  automatic callouts; when it is used, the output indicates how the
       pattern is matched. This is useful information when you are  trying  to
       optimize the performance of a particular pattern.


MISSING CALLOUTS

       You  should  be  aware  that,  because of optimizations in the way PCRE
       matches patterns, callouts sometimes do not happen. For example, if the
       pattern is

         ab(?C4)cd

       PCRE knows that any matching string must contain the letter "d". If the
       subject string is "abyz", the lack of "d" means that  matching  doesn't
       ever  start,  and  the  callout is never reached. However, with "abyd",
       though the result is still no match, the callout is obeyed.


THE CALLOUT INTERFACE

       During matching, when PCRE reaches a callout point, the external  func-
       tion  defined by pcre_callout is called (if it is set). This applies to
       both the pcre_exec() and the pcre_dfa_exec()  matching  functions.  The
       only  argument  to  the callout function is a pointer to a pcre_callout
       block. This structure contains the following fields:

         int          version;
         int          callout_number;
         int         *offset_vector;
         const char  *subject;
         int          subject_length;
         int          start_match;
         int          current_position;
         int          capture_top;
         int          capture_last;
         void        *callout_data;
         int          pattern_position;
         int          next_item_length;

       The version field is an integer containing the version  number  of  the
       block  format. The initial version was 0; the current version is 1. The
       version number will change again in future  if  additional  fields  are
       added, but the intention is never to remove any of the existing fields.

       The callout_number field contains the number of the  callout,  as  com-
       piled  into  the pattern (that is, the number after ?C for manual call-
       outs, and 255 for automatically generated callouts).

       The offset_vector field is a pointer to the vector of offsets that  was
       passed   by   the   caller  to  pcre_exec()  or  pcre_dfa_exec().  When
       pcre_exec() is used, the contents can be inspected in order to  extract
       substrings  that  have  been  matched  so  far,  in the same way as for
       extracting substrings after a match has completed. For  pcre_dfa_exec()
       this field is not useful.

       The subject and subject_length fields contain copies of the values that
       were passed to pcre_exec().

       The start_match field contains the offset within the subject  at  which
       the  current match attempt started. If the pattern is not anchored, the
       callout function may be called several times from the same point in the
       pattern for different starting points in the subject.

       The  current_position  field  contains the offset within the subject of
       the current match pointer.

       When the pcre_exec() function is used, the capture_top  field  contains
       one  more than the number of the highest numbered captured substring so
       far. If no substrings have been captured, the value of  capture_top  is
       one.  This  is always the case when pcre_dfa_exec() is used, because it
       does not support captured substrings.

       The capture_last field contains the number of the  most  recently  cap-
       tured  substring. If no substrings have been captured, its value is -1.
       This is always the case when pcre_dfa_exec() is used.

       The callout_data field contains a value that is passed  to  pcre_exec()
       or  pcre_dfa_exec() specifically so that it can be passed back in call-
       outs. It is passed in the pcre_callout field  of  the  pcre_extra  data
       structure.  If  no such data was passed, the value of callout_data in a
       pcre_callout block is NULL. There is a description  of  the  pcre_extra
       structure in the pcreapi documentation.

       The  pattern_position field is present from version 1 of the pcre_call-
       out structure. It contains the offset to the next item to be matched in
       the pattern string.

       The  next_item_length field is present from version 1 of the pcre_call-
       out structure. It contains the length of the next item to be matched in
       the  pattern  string. When the callout immediately precedes an alterna-
       tion bar, a closing parenthesis, or the end of the pattern, the  length
       is  zero.  When the callout precedes an opening parenthesis, the length
       is that of the entire subpattern.

       The pattern_position and next_item_length fields are intended  to  help
       in  distinguishing between different automatic callouts, which all have
       the same callout number. However, they are set for all callouts.


RETURN VALUES

       The external callout function returns an integer to PCRE. If the  value
       is  zero,  matching  proceeds  as  normal. If the value is greater than
       zero, matching fails at the current point, but  the  testing  of  other
       matching possibilities goes ahead, just as if a lookahead assertion had
       failed. If the value is less than zero, the  match  is  abandoned,  and
       pcre_exec() (or pcre_dfa_exec()) returns the negative value.

       Negative   values   should   normally   be   chosen  from  the  set  of
       PCRE_ERROR_xxx values. In particular, PCRE_ERROR_NOMATCH forces a stan-
       dard  "no  match"  failure.   The  error  number  PCRE_ERROR_CALLOUT is
       reserved for use by callout functions; it will never be  used  by  PCRE
       itself.


AUTHOR

       Philip Hazel
       University Computing Service
       Cambridge CB2 3QH, England.


REVISION

       Last updated: 06 March 2007
       Copyright (c) 1997-2007 University of Cambridge.
------------------------------------------------------------------------------


PCRECOMPAT(3)                                                    PCRECOMPAT(3)


NAME
       PCRE - Perl-compatible regular expressions


DIFFERENCES BETWEEN PCRE AND PERL

       This  document describes the differences in the ways that PCRE and Perl
       handle regular expressions. The differences described here  are  mainly
       with  respect  to  Perl 5.8, though PCRE version 7.0 contains some fea-
       tures that are expected to be in the forthcoming Perl 5.10.

       1. PCRE has only a subset of Perl's UTF-8 and Unicode support.  Details
       of  what  it does have are given in the section on UTF-8 support in the
       main pcre page.

       2. PCRE does not allow repeat quantifiers on lookahead assertions. Perl
       permits  them,  but they do not mean what you might think. For example,
       (?!a){3} does not assert that the next three characters are not "a". It
       just asserts that the next character is not "a" three times.

       3.  Capturing  subpatterns  that occur inside negative lookahead asser-
       tions are counted, but their entries in the offsets  vector  are  never
       set.  Perl sets its numerical variables from any such patterns that are
       matched before the assertion fails to match something (thereby succeed-
       ing),  but  only  if the negative lookahead assertion contains just one
       branch.

       4. Though binary zero characters are supported in the  subject  string,
       they are not allowed in a pattern string because it is passed as a nor-
       mal C string, terminated by zero. The escape sequence \0 can be used in
       the pattern to represent a binary zero.

       5.  The  following Perl escape sequences are not supported: \l, \u, \L,
       \U, and \N. In fact these are implemented by Perl's general string-han-
       dling  and are not part of its pattern matching engine. If any of these
       are encountered by PCRE, an error is generated.

       6. The Perl escape sequences \p, \P, and \X are supported only if  PCRE
       is  built  with Unicode character property support. The properties that
       can be tested with \p and \P are limited to the general category  prop-
       erties  such  as  Lu and Nd, script names such as Greek or Han, and the
       derived properties Any and L&.

       7. PCRE does support the \Q...\E escape for quoting substrings. Charac-
       ters  in  between  are  treated as literals. This is slightly different
       from Perl in that $ and @ are  also  handled  as  literals  inside  the
       quotes.  In Perl, they cause variable interpolation (but of course PCRE
       does not have variables). Note the following examples:

           Pattern            PCRE matches      Perl matches

           \Qabc$xyz\E        abc$xyz           abc followed by the
                                                  contents of $xyz
           \Qabc\$xyz\E       abc\$xyz          abc\$xyz
           \Qabc\E\$\Qxyz\E   abc$xyz           abc$xyz

       The \Q...\E sequence is recognized both inside  and  outside  character
       classes.

       8. Fairly obviously, PCRE does not support the (?{code}) and (??{code})
       constructions. However, there is support for recursive  patterns.  This
       is  not available in Perl 5.8, but will be in Perl 5.10. Also, the PCRE
       "callout" feature allows an external function to be called during  pat-
       tern matching. See the pcrecallout documentation for details.

       9.  Subpatterns  that  are  called  recursively or as "subroutines" are
       always treated as atomic groups in  PCRE.  This  is  like  Python,  but
       unlike Perl.

       10.  There are some differences that are concerned with the settings of
       captured strings when part of  a  pattern  is  repeated.  For  example,
       matching  "aba"  against  the  pattern  /^(a(b)?)+$/  in Perl leaves $2
       unset, but in PCRE it is set to "b".

       11. PCRE provides some extensions to the Perl regular expression facil-
       ities.   Perl  5.10  will  include new features that are not in earlier
       versions, some of which (such as named parentheses) have been  in  PCRE
       for some time. This list is with respect to Perl 5.10:

       (a)  Although  lookbehind  assertions  must match fixed length strings,
       each alternative branch of a lookbehind assertion can match a different
       length of string. Perl requires them all to have the same length.

       (b)  If PCRE_DOLLAR_ENDONLY is set and PCRE_MULTILINE is not set, the $
       meta-character matches only at the very end of the string.

       (c) If PCRE_EXTRA is set, a backslash followed by a letter with no spe-
       cial  meaning  is  faulted.  Otherwise,  like  Perl,  the  backslash is
       ignored. (Perl can be made to issue a warning.)

       (d) If PCRE_UNGREEDY is set, the greediness of the  repetition  quanti-
       fiers is inverted, that is, by default they are not greedy, but if fol-
       lowed by a question mark they are.

       (e) PCRE_ANCHORED can be used at matching time to force a pattern to be
       tried only at the first matching position in the subject string.

       (f)  The PCRE_NOTBOL, PCRE_NOTEOL, PCRE_NOTEMPTY, and PCRE_NO_AUTO_CAP-
       TURE options for pcre_exec() have no Perl equivalents.

       (g) The callout facility is PCRE-specific.

       (h) The partial matching facility is PCRE-specific.

       (i) Patterns compiled by PCRE can be saved and re-used at a later time,
       even on different hosts that have the other endianness.

       (j)  The  alternative  matching function (pcre_dfa_exec()) matches in a
       different way and is not Perl-compatible.


AUTHOR

       Philip Hazel
       University Computing Service
       Cambridge CB2 3QH, England.


REVISION

       Last updated: 06 March 2007
       Copyright (c) 1997-2007 University of Cambridge.
------------------------------------------------------------------------------


PCREPATTERN(3)                                                  PCREPATTERN(3)


NAME
       PCRE - Perl-compatible regular expressions


PCRE REGULAR EXPRESSION DETAILS

       The  syntax  and semantics of the regular expressions supported by PCRE
       are described below. Regular expressions are also described in the Perl
       documentation  and  in  a  number  of books, some of which have copious
       examples.  Jeffrey Friedl's "Mastering Regular Expressions",  published
       by  O'Reilly, covers regular expressions in great detail. This descrip-
       tion of PCRE's regular expressions is intended as reference material.

       The original operation of PCRE was on strings of  one-byte  characters.
       However,  there is now also support for UTF-8 character strings. To use
       this, you must build PCRE to  include  UTF-8  support,  and  then  call
       pcre_compile()  with  the  PCRE_UTF8  option.  How this affects pattern
       matching is mentioned in several places below. There is also a  summary
       of  UTF-8  features  in  the  section on UTF-8 support in the main pcre
       page.

       The remainder of this document discusses the  patterns  that  are  sup-
       ported  by  PCRE when its main matching function, pcre_exec(), is used.
       From  release  6.0,   PCRE   offers   a   second   matching   function,
       pcre_dfa_exec(),  which matches using a different algorithm that is not
       Perl-compatible. The advantages and disadvantages  of  the  alternative
       function, and how it differs from the normal function, are discussed in
       the pcrematching page.


CHARACTERS AND METACHARACTERS

       A regular expression is a pattern that is  matched  against  a  subject
       string  from  left  to right. Most characters stand for themselves in a
       pattern, and match the corresponding characters in the  subject.  As  a
       trivial example, the pattern

         The quick brown fox

       matches a portion of a subject string that is identical to itself. When
       caseless matching is specified (the PCRE_CASELESS option), letters  are
       matched  independently  of case. In UTF-8 mode, PCRE always understands
       the concept of case for characters whose values are less than  128,  so
       caseless  matching  is always possible. For characters with higher val-
       ues, the concept of case is supported if PCRE is compiled with  Unicode
       property  support,  but  not  otherwise.   If  you want to use caseless
       matching for characters 128 and above, you must  ensure  that  PCRE  is
       compiled with Unicode property support as well as with UTF-8 support.

       The  power  of  regular  expressions  comes from the ability to include
       alternatives and repetitions in the pattern. These are encoded  in  the
       pattern by the use of metacharacters, which do not stand for themselves
       but instead are interpreted in some special way.

       There are two different sets of metacharacters: those that  are  recog-
       nized  anywhere in the pattern except within square brackets, and those
       that are recognized within square brackets.  Outside  square  brackets,
       the metacharacters are as follows:

         \      general escape character with several uses
         ^      assert start of string (or line, in multiline mode)
         $      assert end of string (or line, in multiline mode)
         .      match any character except newline (by default)
         [      start character class definition
         |      start of alternative branch
         (      start subpattern
         )      end subpattern
         ?      extends the meaning of (
                also 0 or 1 quantifier
                also quantifier minimizer
         *      0 or more quantifier
         +      1 or more quantifier
                also "possessive quantifier"
         {      start min/max quantifier

       Part  of  a  pattern  that is in square brackets is called a "character
       class". In a character class the only metacharacters are:

         \      general escape character
         ^      negate the class, but only if the first character
         -      indicates character range
         [      POSIX character class (only if followed by POSIX
                  syntax)
         ]      terminates the character class

       The following sections describe the use of each of the  metacharacters.


BACKSLASH

       The backslash character has several uses. Firstly, if it is followed by
       a non-alphanumeric character, it takes away any  special  meaning  that
       character  may  have.  This  use  of  backslash  as an escape character
       applies both inside and outside character classes.

       For example, if you want to match a * character, you write  \*  in  the
       pattern.   This  escaping  action  applies whether or not the following
       character would otherwise be interpreted as a metacharacter, so  it  is
       always  safe  to  precede  a non-alphanumeric with backslash to specify
       that it stands for itself. In particular, if you want to match a  back-
       slash, you write \\.

       If  a  pattern is compiled with the PCRE_EXTENDED option, whitespace in
       the pattern (other than in a character class) and characters between  a
       # outside a character class and the next newline are ignored. An escap-
       ing backslash can be used to include a whitespace  or  #  character  as
       part of the pattern.

       If  you  want  to remove the special meaning from a sequence of charac-
       ters, you can do so by putting them between \Q and \E. This is  differ-
       ent  from  Perl  in  that  $  and  @ are handled as literals in \Q...\E
       sequences in PCRE, whereas in Perl, $ and @ cause  variable  interpola-
       tion. Note the following examples:

         Pattern            PCRE matches   Perl matches

         \Qabc$xyz\E        abc$xyz        abc followed by the
                                             contents of $xyz
         \Qabc\$xyz\E       abc\$xyz       abc\$xyz
         \Qabc\E\$\Qxyz\E   abc$xyz        abc$xyz

       The  \Q...\E  sequence  is recognized both inside and outside character
       classes.

   Non-printing characters

       A second use of backslash provides a way of encoding non-printing char-
       acters  in patterns in a visible manner. There is no restriction on the
       appearance of non-printing characters, apart from the binary zero  that
       terminates  a  pattern,  but  when  a pattern is being prepared by text
       editing, it is usually easier  to  use  one  of  the  following  escape
       sequences than the binary character it represents:

         \a        alarm, that is, the BEL character (hex 07)
         \cx       "control-x", where x is any character
         \e        escape (hex 1B)
         \f        formfeed (hex 0C)
         \n        newline (hex 0A)
         \r        carriage return (hex 0D)
         \t        tab (hex 09)
         \ddd      character with octal code ddd, or backreference
         \xhh      character with hex code hh
         \x{hhh..} character with hex code hhh..

       The  precise  effect of \cx is as follows: if x is a lower case letter,
       it is converted to upper case. Then bit 6 of the character (hex 40)  is
       inverted.   Thus  \cz becomes hex 1A, but \c{ becomes hex 3B, while \c;
       becomes hex 7B.

       After \x, from zero to two hexadecimal digits are read (letters can  be
       in  upper  or  lower case). Any number of hexadecimal digits may appear
       between \x{ and }, but the value of the character  code  must  be  less
       than 256 in non-UTF-8 mode, and less than 2**31 in UTF-8 mode (that is,
       the maximum hexadecimal value is 7FFFFFFF). If  characters  other  than
       hexadecimal  digits  appear between \x{ and }, or if there is no termi-
       nating }, this form of escape is not recognized.  Instead, the  initial
       \x will be interpreted as a basic hexadecimal escape, with no following
       digits, giving a character whose value is zero.

       Characters whose value is less than 256 can be defined by either of the
       two  syntaxes  for  \x. There is no difference in the way they are han-
       dled. For example, \xdc is exactly the same as \x{dc}.

       After \0 up to two further octal digits are read. If  there  are  fewer
       than  two  digits,  just  those  that  are  present  are used. Thus the
       sequence \0\x\07 specifies two binary zeros followed by a BEL character
       (code  value 7). Make sure you supply two digits after the initial zero
       if the pattern character that follows is itself an octal digit.

       The handling of a backslash followed by a digit other than 0 is compli-
       cated.  Outside a character class, PCRE reads it and any following dig-
       its as a decimal number. If the number is less than  10,  or  if  there
       have been at least that many previous capturing left parentheses in the
       expression, the entire  sequence  is  taken  as  a  back  reference.  A
       description  of how this works is given later, following the discussion
       of parenthesized subpatterns.

       Inside a character class, or if the decimal number is  greater  than  9
       and  there have not been that many capturing subpatterns, PCRE re-reads
       up to three octal digits following the backslash, and uses them to gen-
       erate  a data character. Any subsequent digits stand for themselves. In
       non-UTF-8 mode, the value of a character specified  in  octal  must  be
       less  than  \400.  In  UTF-8 mode, values up to \777 are permitted. For
       example:

         \040   is another way of writing a space
         \40    is the same, provided there are fewer than 40
                   previous capturing subpatterns
         \7     is always a back reference
         \11    might be a back reference, or another way of
                   writing a tab
         \011   is always a tab
         \0113  is a tab followed by the character "3"
         \113   might be a back reference, otherwise the
                   character with octal code 113
         \377   might be a back reference, otherwise
                   the byte consisting entirely of 1 bits
         \81    is either a back reference, or a binary zero
                   followed by the two characters "8" and "1"

       Note that octal values of 100 or greater must not be  introduced  by  a
       leading zero, because no more than three octal digits are ever read.

       All the sequences that define a single character value can be used both
       inside and outside character classes. In addition, inside  a  character
       class,  the  sequence \b is interpreted as the backspace character (hex
       08), and the sequences \R and \X are interpreted as the characters  "R"
       and  "X", respectively. Outside a character class, these sequences have
       different meanings (see below).

   Absolute and relative back references

       The sequence \g followed by a positive or negative  number,  optionally
       enclosed  in  braces,  is  an absolute or relative back reference. Back
       references are discussed later, following the discussion  of  parenthe-
       sized subpatterns.

   Generic character types

       Another use of backslash is for specifying generic character types. The
       following are always recognized:

         \d     any decimal digit
         \D     any character that is not a decimal digit
         \s     any whitespace character
         \S     any character that is not a whitespace character
         \w     any "word" character
         \W     any "non-word" character

       Each pair of escape sequences partitions the complete set of characters
       into  two disjoint sets. Any given character matches one, and only one,
       of each pair.

       These character type sequences can appear both inside and outside char-
       acter  classes.  They each match one character of the appropriate type.
       If the current matching point is at the end of the subject string,  all
       of them fail, since there is no character to match.

       For  compatibility  with Perl, \s does not match the VT character (code
       11).  This makes it different from the the POSIX "space" class. The  \s
       characters  are  HT (9), LF (10), FF (12), CR (13), and space (32). (If
       "use locale;" is included in a Perl script, \s may match the VT charac-
       ter. In PCRE, it never does.)

       A "word" character is an underscore or any character less than 256 that
       is a letter or digit. The definition of  letters  and  digits  is  con-
       trolled  by PCRE's low-valued character tables, and may vary if locale-
       specific matching is taking place (see "Locale support" in the  pcreapi
       page).  For  example,  in  a French locale such as "fr_FR" in Unix-like
       systems, or "french" in Windows, some character codes greater than  128
       are used for accented letters, and these are matched by \w.

       In  UTF-8 mode, characters with values greater than 128 never match \d,
       \s, or \w, and always match \D, \S, and \W. This is true even when Uni-
       code  character  property support is available. The use of locales with
       Unicode is discouraged.

   Newline sequences

       Outside a character class, the escape sequence \R matches  any  Unicode
       newline sequence. This is an extension to Perl. In non-UTF-8 mode \R is
       equivalent to the following:

         (?>\r\n|\n|\x0b|\f|\r|\x85)

       This is an example of an "atomic group", details  of  which  are  given
       below.  This particular group matches either the two-character sequence
       CR followed by LF, or  one  of  the  single  characters  LF  (linefeed,
       U+000A), VT (vertical tab, U+000B), FF (formfeed, U+000C), CR (carriage
       return, U+000D), or NEL (next line, U+0085). The two-character sequence
       is treated as a single unit that cannot be split.

       In  UTF-8  mode, two additional characters whose codepoints are greater
       than 255 are added: LS (line separator, U+2028) and PS (paragraph sepa-
       rator,  U+2029).   Unicode character property support is not needed for
       these characters to be recognized.

       Inside a character class, \R matches the letter "R".

   Unicode character properties

       When PCRE is built with Unicode character property support, three addi-
       tional  escape  sequences  to  match character properties are available
       when UTF-8 mode is selected. They are:

         \p{xx}   a character with the xx property
         \P{xx}   a character without the xx property
         \X       an extended Unicode sequence

       The property names represented by xx above are limited to  the  Unicode
       script names, the general category properties, and "Any", which matches
       any character (including newline). Other properties such as "InMusical-
       Symbols"  are  not  currently supported by PCRE. Note that \P{Any} does
       not match any characters, so always causes a match failure.

       Sets of Unicode characters are defined as belonging to certain scripts.
       A  character from one of these sets can be matched using a script name.
       For example:

         \p{Greek}
         \P{Han}

       Those that are not part of an identified script are lumped together  as
       "Common". The current list of scripts is:

       Arabic,  Armenian,  Balinese,  Bengali,  Bopomofo,  Braille,  Buginese,
       Buhid,  Canadian_Aboriginal,  Cherokee,  Common,   Coptic,   Cuneiform,
       Cypriot, Cyrillic, Deseret, Devanagari, Ethiopic, Georgian, Glagolitic,
       Gothic, Greek, Gujarati, Gurmukhi, Han, Hangul, Hanunoo, Hebrew,  Hira-
       gana,  Inherited,  Kannada,  Katakana,  Kharoshthi,  Khmer, Lao, Latin,
       Limbu,  Linear_B,  Malayalam,  Mongolian,  Myanmar,  New_Tai_Lue,  Nko,
       Ogham,  Old_Italic,  Old_Persian, Oriya, Osmanya, Phags_Pa, Phoenician,
       Runic,  Shavian,  Sinhala,  Syloti_Nagri,  Syriac,  Tagalog,  Tagbanwa,
       Tai_Le, Tamil, Telugu, Thaana, Thai, Tibetan, Tifinagh, Ugaritic, Yi.

       Each  character has exactly one general category property, specified by
       a two-letter abbreviation. For compatibility with Perl, negation can be
       specified  by  including a circumflex between the opening brace and the
       property name. For example, \p{^Lu} is the same as \P{Lu}.

       If only one letter is specified with \p or \P, it includes all the gen-
       eral  category properties that start with that letter. In this case, in
       the absence of negation, the curly brackets in the escape sequence  are
       optional; these two examples have the same effect:

         \p{L}
         \pL

       The following general category property codes are supported:

         C     Other
         Cc    Control
         Cf    Format
         Cn    Unassigned
         Co    Private use
         Cs    Surrogate

         L     Letter
         Ll    Lower case letter
         Lm    Modifier letter
         Lo    Other letter
         Lt    Title case letter
         Lu    Upper case letter

         M     Mark
         Mc    Spacing mark
         Me    Enclosing mark
         Mn    Non-spacing mark

         N     Number
         Nd    Decimal number
         Nl    Letter number
         No    Other number

         P     Punctuation
         Pc    Connector punctuation
         Pd    Dash punctuation
         Pe    Close punctuation
         Pf    Final punctuation
         Pi    Initial punctuation
         Po    Other punctuation
         Ps    Open punctuation

         S     Symbol
         Sc    Currency symbol
         Sk    Modifier symbol
         Sm    Mathematical symbol
         So    Other symbol

         Z     Separator
         Zl    Line separator
         Zp    Paragraph separator
         Zs    Space separator

       The  special property L& is also supported: it matches a character that
       has the Lu, Ll, or Lt property, in other words, a letter  that  is  not
       classified as a modifier or "other".

       The  long  synonyms  for  these  properties that Perl supports (such as
       \p{Letter}) are not supported by PCRE, nor is it  permitted  to  prefix
       any of these properties with "Is".

       No character that is in the Unicode table has the Cn (unassigned) prop-
       erty.  Instead, this property is assumed for any code point that is not
       in the Unicode table.

       Specifying  caseless  matching  does not affect these escape sequences.
       For example, \p{Lu} always matches only upper case letters.

       The \X escape matches any number of Unicode  characters  that  form  an
       extended Unicode sequence. \X is equivalent to

         (?>\PM\pM*)

       That  is,  it matches a character without the "mark" property, followed
       by zero or more characters with the "mark"  property,  and  treats  the
       sequence  as  an  atomic group (see below).  Characters with the "mark"
       property are typically accents that affect the preceding character.

       Matching characters by Unicode property is not fast, because  PCRE  has
       to  search  a  structure  that  contains data for over fifteen thousand
       characters. That is why the traditional escape sequences such as \d and
       \w do not use Unicode properties in PCRE.

   Simple assertions

       The  final use of backslash is for certain simple assertions. An asser-
       tion specifies a condition that has to be met at a particular point  in
       a  match, without consuming any characters from the subject string. The
       use of subpatterns for more complicated assertions is described  below.
       The backslashed assertions are:

         \b     matches at a word boundary
         \B     matches when not at a word boundary
         \A     matches at the start of the subject
         \Z     matches at the end of the subject
                 also matches before a newline at the end of the subject
         \z     matches only at the end of the subject
         \G     matches at the first matching position in the subject

       These  assertions may not appear in character classes (but note that \b
       has a different meaning, namely the backspace character, inside a char-
       acter class).

       A  word  boundary is a position in the subject string where the current
       character and the previous character do not both match \w or  \W  (i.e.
       one  matches  \w  and the other matches \W), or the start or end of the
       string if the first or last character matches \w, respectively.

       The \A, \Z, and \z assertions differ from  the  traditional  circumflex
       and dollar (described in the next section) in that they only ever match
       at the very start and end of the subject string, whatever  options  are
       set.  Thus,  they are independent of multiline mode. These three asser-
       tions are not affected by the PCRE_NOTBOL or PCRE_NOTEOL options, which
       affect  only the behaviour of the circumflex and dollar metacharacters.
       However, if the startoffset argument of pcre_exec() is non-zero,  indi-
       cating that matching is to start at a point other than the beginning of
       the subject, \A can never match. The difference between \Z  and  \z  is
       that \Z matches before a newline at the end of the string as well as at
       the very end, whereas \z matches only at the end.

       The \G assertion is true only when the current matching position is  at
       the  start point of the match, as specified by the startoffset argument
       of pcre_exec(). It differs from \A when the  value  of  startoffset  is
       non-zero.  By calling pcre_exec() multiple times with appropriate argu-
       ments, you can mimic Perl's /g option, and it is in this kind of imple-
       mentation where \G can be useful.

       Note,  however,  that  PCRE's interpretation of \G, as the start of the
       current match, is subtly different from Perl's, which defines it as the
       end  of  the  previous  match. In Perl, these can be different when the
       previously matched string was empty. Because PCRE does just  one  match
       at a time, it cannot reproduce this behaviour.

       If  all  the alternatives of a pattern begin with \G, the expression is
       anchored to the starting match position, and the "anchored" flag is set
       in the compiled regular expression.


CIRCUMFLEX AND DOLLAR

       Outside a character class, in the default matching mode, the circumflex
       character is an assertion that is true only  if  the  current  matching
       point  is  at the start of the subject string. If the startoffset argu-
       ment of pcre_exec() is non-zero, circumflex  can  never  match  if  the
       PCRE_MULTILINE  option  is  unset. Inside a character class, circumflex
       has an entirely different meaning (see below).

       Circumflex need not be the first character of the pattern if  a  number
       of  alternatives are involved, but it should be the first thing in each
       alternative in which it appears if the pattern is ever  to  match  that
       branch.  If all possible alternatives start with a circumflex, that is,
       if the pattern is constrained to match only at the start  of  the  sub-
       ject,  it  is  said  to be an "anchored" pattern. (There are also other
       constructs that can cause a pattern to be anchored.)

       A dollar character is an assertion that is true  only  if  the  current
       matching  point  is  at  the  end of the subject string, or immediately
       before a newline at the end of the string (by default). Dollar need not
       be  the  last  character of the pattern if a number of alternatives are
       involved, but it should be the last item in  any  branch  in  which  it
       appears. Dollar has no special meaning in a character class.

       The  meaning  of  dollar  can be changed so that it matches only at the
       very end of the string, by setting the  PCRE_DOLLAR_ENDONLY  option  at
       compile time. This does not affect the \Z assertion.

       The meanings of the circumflex and dollar characters are changed if the
       PCRE_MULTILINE option is set. When  this  is  the  case,  a  circumflex
       matches  immediately after internal newlines as well as at the start of
       the subject string. It does not match after a  newline  that  ends  the
       string.  A dollar matches before any newlines in the string, as well as
       at the very end, when PCRE_MULTILINE is set. When newline is  specified
       as  the  two-character  sequence CRLF, isolated CR and LF characters do
       not indicate newlines.

       For example, the pattern /^abc$/ matches the subject string  "def\nabc"
       (where  \n  represents a newline) in multiline mode, but not otherwise.
       Consequently, patterns that are anchored in single  line  mode  because
       all  branches  start  with  ^ are not anchored in multiline mode, and a
       match for circumflex is  possible  when  the  startoffset  argument  of
       pcre_exec()  is  non-zero. The PCRE_DOLLAR_ENDONLY option is ignored if
       PCRE_MULTILINE is set.

       Note that the sequences \A, \Z, and \z can be used to match  the  start
       and  end of the subject in both modes, and if all branches of a pattern
       start with \A it is always anchored, whether or not  PCRE_MULTILINE  is
       set.


FULL STOP (PERIOD, DOT)

       Outside a character class, a dot in the pattern matches any one charac-
       ter in the subject string except (by default) a character  that  signi-
       fies  the  end  of  a line. In UTF-8 mode, the matched character may be
       more than one byte long.

       When a line ending is defined as a single character, dot never  matches
       that  character; when the two-character sequence CRLF is used, dot does
       not match CR if it is immediately followed  by  LF,  but  otherwise  it
       matches  all characters (including isolated CRs and LFs). When any Uni-
       code line endings are being recognized, dot does not match CR or LF  or
       any of the other line ending characters.

       The  behaviour  of  dot  with regard to newlines can be changed. If the
       PCRE_DOTALL option is set, a dot matches  any  one  character,  without
       exception. If the two-character sequence CRLF is present in the subject
       string, it takes two dots to match it.

       The handling of dot is entirely independent of the handling of  circum-
       flex  and  dollar,  the  only relationship being that they both involve
       newlines. Dot has no special meaning in a character class.


MATCHING A SINGLE BYTE

       Outside a character class, the escape sequence \C matches any one byte,
       both  in  and  out  of  UTF-8 mode. Unlike a dot, it always matches any
       line-ending characters. The feature is provided in  Perl  in  order  to
       match  individual bytes in UTF-8 mode. Because it breaks up UTF-8 char-
       acters into individual bytes, what remains in the string may be a  mal-
       formed  UTF-8  string.  For this reason, the \C escape sequence is best
       avoided.

       PCRE does not allow \C to appear in  lookbehind  assertions  (described
       below),  because  in UTF-8 mode this would make it impossible to calcu-
       late the length of the lookbehind.


SQUARE BRACKETS AND CHARACTER CLASSES

       An opening square bracket introduces a character class, terminated by a
       closing square bracket. A closing square bracket on its own is not spe-
       cial. If a closing square bracket is required as a member of the class,
       it  should  be  the first data character in the class (after an initial
       circumflex, if present) or escaped with a backslash.

       A character class matches a single character in the subject.  In  UTF-8
       mode,  the character may occupy more than one byte. A matched character
       must be in the set of characters defined by the class, unless the first
       character  in  the  class definition is a circumflex, in which case the
       subject character must not be in the set defined by  the  class.  If  a
       circumflex  is actually required as a member of the class, ensure it is
       not the first character, or escape it with a backslash.

       For example, the character class [aeiou] matches any lower case  vowel,
       while  [^aeiou]  matches  any character that is not a lower case vowel.
       Note that a circumflex is just a convenient notation for specifying the
       characters  that  are in the class by enumerating those that are not. A
       class that starts with a circumflex is not an assertion: it still  con-
       sumes  a  character  from the subject string, and therefore it fails if
       the current pointer is at the end of the string.

       In UTF-8 mode, characters with values greater than 255 can be  included
       in  a  class as a literal string of bytes, or by using the \x{ escaping
       mechanism.

       When caseless matching is set, any letters in a  class  represent  both
       their  upper  case  and lower case versions, so for example, a caseless
       [aeiou] matches "A" as well as "a", and a caseless  [^aeiou]  does  not
       match  "A", whereas a caseful version would. In UTF-8 mode, PCRE always
       understands the concept of case for characters whose  values  are  less
       than  128, so caseless matching is always possible. For characters with
       higher values, the concept of case is supported  if  PCRE  is  compiled
       with  Unicode  property support, but not otherwise.  If you want to use
       caseless matching for characters 128 and above, you  must  ensure  that
       PCRE  is  compiled  with Unicode property support as well as with UTF-8
       support.

       Characters that might indicate line breaks are  never  treated  in  any
       special  way  when  matching  character  classes,  whatever line-ending
       sequence is in  use,  and  whatever  setting  of  the  PCRE_DOTALL  and
       PCRE_MULTILINE options is used. A class such as [^a] always matches one
       of these characters.

       The minus (hyphen) character can be used to specify a range of  charac-
       ters  in  a  character  class.  For  example,  [d-m] matches any letter
       between d and m, inclusive. If a  minus  character  is  required  in  a
       class,  it  must  be  escaped  with a backslash or appear in a position
       where it cannot be interpreted as indicating a range, typically as  the
       first or last character in the class.

       It is not possible to have the literal character "]" as the end charac-
       ter of a range. A pattern such as [W-]46] is interpreted as a class  of
       two  characters ("W" and "-") followed by a literal string "46]", so it
       would match "W46]" or "-46]". However, if the "]"  is  escaped  with  a
       backslash  it is interpreted as the end of range, so [W-\]46] is inter-
       preted as a class containing a range followed by two other  characters.
       The  octal or hexadecimal representation of "]" can also be used to end
       a range.

       Ranges operate in the collating sequence of character values. They  can
       also   be  used  for  characters  specified  numerically,  for  example
       [\000-\037]. In UTF-8 mode, ranges can include characters whose  values
       are greater than 255, for example [\x{100}-\x{2ff}].

       If a range that includes letters is used when caseless matching is set,
       it matches the letters in either case. For example, [W-c] is equivalent
       to  [][\\^_`wxyzabc],  matched  caselessly,  and  in non-UTF-8 mode, if
       character tables for a French locale are in  use,  [\xc8-\xcb]  matches
       accented  E  characters in both cases. In UTF-8 mode, PCRE supports the
       concept of case for characters with values greater than 128  only  when
       it is compiled with Unicode property support.

       The  character types \d, \D, \p, \P, \s, \S, \w, and \W may also appear
       in a character class, and add the characters that  they  match  to  the
       class. For example, [\dABCDEF] matches any hexadecimal digit. A circum-
       flex can conveniently be used with the upper case  character  types  to
       specify  a  more  restricted  set of characters than the matching lower
       case type. For example, the class [^\W_] matches any letter  or  digit,
       but not underscore.

       The  only  metacharacters  that are recognized in character classes are
       backslash, hyphen (only where it can be  interpreted  as  specifying  a
       range),  circumflex  (only  at the start), opening square bracket (only
       when it can be interpreted as introducing a POSIX class name - see  the
       next  section),  and  the  terminating closing square bracket. However,
       escaping other non-alphanumeric characters does no harm.


POSIX CHARACTER CLASSES

       Perl supports the POSIX notation for character classes. This uses names
       enclosed  by  [: and :] within the enclosing square brackets. PCRE also
       supports this notation. For example,

         [01[:alpha:]%]

       matches "0", "1", any alphabetic character, or "%". The supported class
       names are

         alnum    letters and digits
         alpha    letters
         ascii    character codes 0 - 127
         blank    space or tab only
         cntrl    control characters
         digit    decimal digits (same as \d)
         graph    printing characters, excluding space
         lower    lower case letters
         print    printing characters, including space
         punct    printing characters, excluding letters and digits
         space    white space (not quite the same as \s)
         upper    upper case letters
         word     "word" characters (same as \w)
         xdigit   hexadecimal digits

       The  "space" characters are HT (9), LF (10), VT (11), FF (12), CR (13),
       and space (32). Notice that this list includes the VT  character  (code
       11). This makes "space" different to \s, which does not include VT (for
       Perl compatibility).

       The name "word" is a Perl extension, and "blank"  is  a  GNU  extension
       from  Perl  5.8. Another Perl extension is negation, which is indicated
       by a ^ character after the colon. For example,

         [12[:^digit:]]

       matches "1", "2", or any non-digit. PCRE (and Perl) also recognize  the
       POSIX syntax [.ch.] and [=ch=] where "ch" is a "collating element", but
       these are not supported, and an error is given if they are encountered.

       In UTF-8 mode, characters with values greater than 128 do not match any
       of the POSIX character classes.


VERTICAL BAR

       Vertical bar characters are used to separate alternative patterns.  For
       example, the pattern

         gilbert|sullivan

       matches  either "gilbert" or "sullivan". Any number of alternatives may
       appear, and an empty  alternative  is  permitted  (matching  the  empty
       string). The matching process tries each alternative in turn, from left
       to right, and the first one that succeeds is used. If the  alternatives
       are  within a subpattern (defined below), "succeeds" means matching the
       rest of the main pattern as well as the alternative in the  subpattern.


INTERNAL OPTION SETTING

       The  settings  of  the  PCRE_CASELESS, PCRE_MULTILINE, PCRE_DOTALL, and
       PCRE_EXTENDED options can be changed  from  within  the  pattern  by  a
       sequence  of  Perl  option  letters  enclosed between "(?" and ")". The
       option letters are

         i  for PCRE_CASELESS
         m  for PCRE_MULTILINE
         s  for PCRE_DOTALL
         x  for PCRE_EXTENDED

       For example, (?im) sets caseless, multiline matching. It is also possi-