/[pcre]/code/trunk/configure

Diff of /code/trunk/configure

Parent Directory | Revision Log | View Patch Patch

-revision 52 by nigel,
Sat Feb 24 21:39:37 2007 UTC
+revision 53 by nigel,
Sat Feb 24 21:39:42 2007 UTC
 Line 1
  #! /bin/sh
  # Guess values for system-dependent variables and create Makefiles.
- # Generated automatically using autoconf version 2.13
+ # Generated by Autoconf 2.50.
- # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
  #
+ # Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
+ # Free Software Foundation, Inc.
  # This configure script is free software; the Free Software Foundation
  # gives unlimited permission to copy, distribute and modify it.
- # Defaults:
+ # Find the correct PATH separator.  Usually this is `:', but
- ac_help=
+ # DJGPP uses `;' like DOS.
+ if test "X${PATH_SEPARATOR+set}" != Xset; then
+   UNAME=${UNAME-`uname 2>/dev/null`}
+   case X$UNAME in
+     *-DOS) lt_cv_sys_path_separator=';' ;;
+     *)     lt_cv_sys_path_separator=':' ;;
+   esac
+ fi
+ # Check that we are running under the correct shell.
+ SHELL=${CONFIG_SHELL-/bin/sh}
+ case X$ECHO in
+ X*--fallback-echo)
+   # Remove one level of quotation (which was required for Make).
+   ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
+   ;;
+ esac
+ echo=${ECHO-echo}
+ if test "X$1" = X--no-reexec; then
+   # Discard the --no-reexec flag, and continue.
+   shift
+ elif test "X$1" = X--fallback-echo; then
+   # Avoid inline document here, it may be left over
+   :
+ elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+   # Yippee, $echo works!
+   :
+ else
+   # Restart under the correct shell.
+   exec $SHELL "$0" --no-reexec ${1+"$@"}
+ fi
+ if test "X$1" = X--fallback-echo; then
+   # used as fallback echo
+   shift
+   cat <<EOF
+ EOF
+   exit 0
+ fi
+ # The HP-UX ksh and POSIX shell print the target directory to stdout
+ # if CDPATH is set.
+ if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+ if test -z "$ECHO"; then
+ if test "X${echo_test_string+set}" != Xset; then
+ # find a string as large as possible, as long as the shell can cope with it
+   for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
+     # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+     if (echo_test_string="`eval $cmd`") 2>/dev/null &&
+        echo_test_string="`eval $cmd`" &&
+        (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
+     then
+       break
+     fi
+   done
+ fi
+ if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+    echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+    test "X$echo_testing_string" = "X$echo_test_string"; then
+   :
+ else
+   # The Solaris, AIX, and Digital Unix default echo programs unquote
+   # backslashes.  This makes it impossible to quote backslashes using
+   #   echo "$something" | sed 's/\\/\\\\/g'
+   #
+   # So, first we look for a working echo in the user's PATH.
+   IFS="${IFS=   }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+   for dir in $PATH /usr/ucb; do
+     if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+        test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+        echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+        test "X$echo_testing_string" = "X$echo_test_string"; then
+       echo="$dir/echo"
+       break
+     fi
+   done
+   IFS="$save_ifs"
+   if test "X$echo" = Xecho; then
+     # We didn't find a better echo, so look for alternatives.
+     if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
+        echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
+        test "X$echo_testing_string" = "X$echo_test_string"; then
+       # This shell has a builtin print -r that does the trick.
+       echo='print -r'
+     elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
+          test "X$CONFIG_SHELL" != X/bin/ksh; then
+       # If we have ksh, try running configure again with it.
+       ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+       export ORIGINAL_CONFIG_SHELL
+       CONFIG_SHELL=/bin/ksh
+       export CONFIG_SHELL
+       exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
+     else
+       # Try using printf.
+       echo='printf %s\n'
+       if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+          echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+          test "X$echo_testing_string" = "X$echo_test_string"; then
+         # Cool, printf works
+         :
+       elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+            test "X$echo_testing_string" = 'X\t' &&
+            echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+            test "X$echo_testing_string" = "X$echo_test_string"; then
+         CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+         export CONFIG_SHELL
+         SHELL="$CONFIG_SHELL"
+         export SHELL
+         echo="$CONFIG_SHELL $0 --fallback-echo"
+       elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+            test "X$echo_testing_string" = 'X\t' &&
+            echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+            test "X$echo_testing_string" = "X$echo_test_string"; then
+         echo="$CONFIG_SHELL $0 --fallback-echo"
+       else
+         # maybe with a smaller string...
+         prev=:
+         for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
+           if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
+           then
+             break
+           fi
+           prev="$cmd"
+         done
+         if test "$prev" != 'sed 50q "$0"'; then
+           echo_test_string=`eval $prev`
+           export echo_test_string
+           exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
+         else
+           # Oops.  We lost completely, so just stick with echo.
+           echo=echo
+         fi
+       fi
+     fi
+   fi
+ fi
+ fi
+ # Copy echo and quote the copy suitably for passing to libtool from
+ # the Makefile, instead of quoting the original, which is used later.
+ ECHO=$echo
+ if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
+    ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
+ fi
+ # Be Bourne compatible
+ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+   emulate sh
+   NULLCMD=:
+ elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+   set -o posix
+ fi
+ # Name of the executable.
+ as_me=`echo "$0" |sed 's,.*[\\/],,'`
+ if expr a : '\(a\)' >/dev/null 2>&1; then
+   as_expr=expr
+ else
+   as_expr=false
+ fi
+ rm -f conf$$ conf$$.exe conf$$.file
+ echo >conf$$.file
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+   # We could just check for DJGPP; but this test a) works b) is more generic
+   # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+   if test -f conf$$.exe; then
+     # Don't use ln at all; we don't have any links
+     as_ln_s='cp -p'
+   else
+     as_ln_s='ln -s'
+   fi
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+   as_ln_s=ln
+ else
+   as_ln_s='cp -p'
+ fi
+ rm -f conf$$ conf$$.exe conf$$.file
+ as_executable_p="test -f"
+ # Support unset when possible.
+ if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
+   as_unset=unset
+ else
+   as_unset=false
+ fi
+ # NLS nuisances.
+ $as_unset LANG || test "${LANG+set}" != set || { LANG=C; export LANG; }
+ $as_unset LC_ALL || test "${LC_ALL+set}" != set || { LC_ALL=C; export LC_ALL; }
+ $as_unset LC_TIME || test "${LC_TIME+set}" != set || { LC_TIME=C; export LC_TIME; }
+ $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set || { LC_CTYPE=C; export LC_CTYPE; }
+ $as_unset LANGUAGE || test "${LANGUAGE+set}" != set || { LANGUAGE=C; export LANGUAGE; }
+ $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set || { LC_COLLATE=C; export LC_COLLATE; }
+ $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set || { LC_NUMERIC=C; export LC_NUMERIC; }
+ $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set || { LC_MESSAGES=C; export LC_MESSAGES; }
+ # IFS
+ # We need space, tab and new line, in precisely that order.
+ as_nl='
+ '
+ IFS="   $as_nl"
+ # CDPATH.
+ $as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=:; export CDPATH; }
+ # Name of the host.
+ # hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+ # so uname gets run too.
+ ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+ exec 6>&1
+ #
+ # Initializations.
+ #
  ac_default_prefix=/usr/local
- # Any additions from configure.in:
+ cross_compiling=no
- ac_help="$ac_help
+ subdirs=
-   --disable-shared        build PCRE as a static library"
+ MFLAGS= MAKEFLAGS=
- ac_help="$ac_help
+ SHELL=${CONFIG_SHELL-/bin/sh}
-   --enable-utf8           enable UTF8 support (incomplete)"
+ # Maximum number of lines to put in a shell here document.
+ # This variable seems obsolete.  It should probably be removed, and
+ # only ac_max_sed_lines should be used.
+ : ${ac_max_here_lines=38}
+ # Avoid depending upon Character Ranges.
+ ac_cr_az='abcdefghijklmnopqrstuvwxyz'
+ ac_cr_AZ='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+ ac_cr_09='0123456789'
+ ac_cr_alnum=$ac_cr_az$ac_cr_AZ$ac_cr_09
+ # Sed expression to map a string onto a valid sh and CPP variable names.
+ ac_tr_sh="sed y%*+%pp%;s%[^_$ac_cr_alnum]%_%g"
+ ac_tr_cpp="sed y%*$ac_cr_az%P$ac_cr_AZ%;s%[^_$ac_cr_alnum]%_%g"
+ ac_unique_file="dftables.c"
+ # Factoring default headers for most tests.
+ ac_includes_default="\
+ #include <stdio.h>
+ #include <sys/types.h>
+ #include <sys/stat.h>
+ #if STDC_HEADERS
+ # include <stdlib.h>
+ # include <stddef.h>
+ #else
+ # if HAVE_STDLIB_H
+ #  include <stdlib.h>
+ # endif
+ #endif
+ #if HAVE_STRING_H
+ # if !STDC_HEADERS && HAVE_MEMORY_H
+ #  include <memory.h>
+ # endif
+ # include <string.h>
+ #else
+ # if HAVE_STRINGS_H
+ #  include <strings.h>
+ # endif
+ #endif
+ #if HAVE_INTTYPES_H
+ # include <inttypes.h>
+ #endif
+ #if HAVE_UNISTD_H
+ # include <unistd.h>
+ #endif"
  # Initialize some variables set by options.
+ ac_init_help=
+ ac_init_version=false
  # The variables have the same names as the options, with
  # dashes changed to underlines.
- build=NONE
+ cache_file=/dev/null
- cache_file=./config.cache
  exec_prefix=NONE
- host=NONE
  no_create=
- nonopt=NONE
  no_recursion=
  prefix=NONE
  program_prefix=NONE
-Line 33 
 program_transform_name=s,x,x,
+Line 303 
 program_transform_name=s,x,x,
  silent=
  site=
  srcdir=
- target=NONE
  verbose=
  x_includes=NONE
  x_libraries=NONE
+ # Installation directory options.
+ # These are left unexpanded so users can "make install exec_prefix=/foo"
+ # and all the variables that are supposed to be based on exec_prefix
+ # by default will actually change.
+ # Use braces instead of parens because sh, perl, etc. also accept them.
  bindir='${exec_prefix}/bin'
  sbindir='${exec_prefix}/sbin'
  libexecdir='${exec_prefix}/libexec'
-Line 50 
 oldincludedir='/usr/include'
+Line 325 
 oldincludedir='/usr/include'
  infodir='${prefix}/info'
  mandir='${prefix}/man'
- # Initialize some other variables.
+ # Identity of this package.
- subdirs=
+ PACKAGE_NAME=
- MFLAGS= MAKEFLAGS=
+ PACKAGE_TARNAME=
- SHELL=${CONFIG_SHELL-/bin/sh}
+ PACKAGE_VERSION=
- # Maximum number of lines to put in a shell here document.
+ PACKAGE_STRING=
- ac_max_here_lines=12
+ PACKAGE_BUGREPORT=
  ac_prev=
  for ac_option
  do
    # If the previous option needs an argument, assign it.
    if test -n "$ac_prev"; then
      eval "$ac_prev=\$ac_option"
-Line 68 
 do
+Line 342 
 do
      continue
    fi
-   case "$ac_option" in
+   ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
-   -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-   *) ac_optarg= ;;
-   esac
    # Accept the important Cygnus configure options, so we can diagnose typos.
-   case "$ac_option" in
+   case $ac_option in
    -bindir | --bindir | --bindi | --bind | --bin | --bi)
      ac_prev=bindir ;;
    -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-     bindir="$ac_optarg" ;;
+     bindir=$ac_optarg ;;
    -build | --build | --buil | --bui | --bu)
-     ac_prev=build ;;
+     ac_prev=build_alias ;;
    -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-     build="$ac_optarg" ;;
+     build_alias=$ac_optarg ;;
    -cache-file | --cache-file | --cache-fil | --cache-fi \
    | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
      ac_prev=cache_file ;;
    -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
    | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-     cache_file="$ac_optarg" ;;
+     cache_file=$ac_optarg ;;
+   --config-cache | -C)
+     cache_file=config.cache ;;
    -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
      ac_prev=datadir ;;
    -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
    | --da=*)
-     datadir="$ac_optarg" ;;
+     datadir=$ac_optarg ;;
    -disable-* | --disable-*)
-     ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
+     ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
      # Reject names that are not valid shell variable names.
-     if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
+     expr "x$ac_feature" : ".*[^-_$ac_cr_alnum]" >/dev/null &&
-       { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+       { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-     fi
+    { (exit 1); exit 1; }; }
-     ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+     ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-     eval "enable_${ac_feature}=no" ;;
+     eval "enable_$ac_feature=no" ;;
    -enable-* | --enable-*)
-     ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
+     ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
      # Reject names that are not valid shell variable names.
-     if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
+     expr "x$ac_feature" : ".*[^-_$ac_cr_alnum]" >/dev/null &&
-       { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+       { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-     fi
+    { (exit 1); exit 1; }; }
-     ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+     ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-     case "$ac_option" in
+     case $ac_option in
-       *=*) ;;
+       *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
        *) ac_optarg=yes ;;
      esac
-     eval "enable_${ac_feature}='$ac_optarg'" ;;
+     eval "enable_$ac_feature='$ac_optarg'" ;;
    -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
    | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-Line 129 
 do
+Line 403 
 do
    -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
    | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
    | --exec=* | --exe=* | --ex=*)
-     exec_prefix="$ac_optarg" ;;
+     exec_prefix=$ac_optarg ;;
    -gas | --gas | --ga | --g)
      # Obsolete; use --with-gas.
      with_gas=yes ;;
-   -help | --help | --hel | --he)
+   -help | --help | --hel | --he | -h)
-     # Omit some internal or obsolete options to make the list less imposing.
+     ac_init_help=long ;;
-     # The list generated by autoconf has been trimmed to remove many
+   -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
-     # options that are totally irrelevant to PCRE (e.g. relating to X),
+     ac_init_help=recursive ;;
-     # or are not supported by its Makefile.
+   -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
-     # The list generated by autoconf has been trimmed to remove many
+     ac_init_help=short ;;
-     # options that are totally irrelevant to PCRE (e.g. relating to X),
-     # or are not supported by its Makefile.
-     # The list generated by autoconf has been trimmed to remove many
-     # options that are totally irrelevant to PCRE (e.g. relating to X),
-     # or are not supported by its Makefile.
-     # This message is too long to be a string in the A/UX 3.1 sh.
-     cat << EOF
- Usage: ./configure [options]
- Options: [defaults in brackets after descriptions]
- Configuration:
-   --cache-file=FILE       cache test results in FILE
-   --help                  print this message
-   --no-create             do not create output files
-   --quiet, --silent       do not print \`checking...' messages
-   --version               print the version of autoconf that created configure
- Directory and file names:
-   --prefix=PREFIX         install architecture-independent files in PREFIX
-                           [$ac_default_prefix]
-   --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                           [same as prefix]
-   --bindir=DIR            user executables in DIR [EPREFIX/bin]
-   --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-   --includedir=DIR        C header files in DIR [PREFIX/include]
-   --mandir=DIR            man documentation in DIR [PREFIX/man]
- EOF
-     cat << EOF
- EOF
-     if test -n "$ac_help"; then
-       echo "--enable and --with options recognized:$ac_help"
-     fi
-     exit 0 ;;
    -host | --host | --hos | --ho)
-     ac_prev=host ;;
+     ac_prev=host_alias ;;
    -host=* | --host=* | --hos=* | --ho=*)
-     host="$ac_optarg" ;;
+     host_alias=$ac_optarg ;;
    -includedir | --includedir | --includedi | --included | --include \
    | --includ | --inclu | --incl | --inc)
      ac_prev=includedir ;;
    -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
    | --includ=* | --inclu=* | --incl=* | --inc=*)
-     includedir="$ac_optarg" ;;
+     includedir=$ac_optarg ;;
    -infodir | --infodir | --infodi | --infod | --info | --inf)
      ac_prev=infodir ;;
    -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-     infodir="$ac_optarg" ;;
+     infodir=$ac_optarg ;;
    -libdir | --libdir | --libdi | --libd)
      ac_prev=libdir ;;
    -libdir=* | --libdir=* | --libdi=* | --libd=*)
-     libdir="$ac_optarg" ;;
+     libdir=$ac_optarg ;;
    -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
    | --libexe | --libex | --libe)
      ac_prev=libexecdir ;;
    -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
    | --libexe=* | --libex=* | --libe=*)
-     libexecdir="$ac_optarg" ;;
+     libexecdir=$ac_optarg ;;
    -localstatedir | --localstatedir | --localstatedi | --localstated \
    | --localstate | --localstat | --localsta | --localst \
-Line 209 
 EOF
+Line 452 
 EOF
    -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
    | --localstate=* | --localstat=* | --localsta=* | --localst=* \
    | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-     localstatedir="$ac_optarg" ;;
+     localstatedir=$ac_optarg ;;
    -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
      ac_prev=mandir ;;
    -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-     mandir="$ac_optarg" ;;
+     mandir=$ac_optarg ;;
    -nfp | --nfp | --nf)
      # Obsolete; use --without-fp.
-Line 235 
 EOF
+Line 478 
 EOF
    -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
    | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
    | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-     oldincludedir="$ac_optarg" ;;
+     oldincludedir=$ac_optarg ;;
    -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
      ac_prev=prefix ;;
    -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-     prefix="$ac_optarg" ;;
+     prefix=$ac_optarg ;;
    -program-prefix | --program-prefix | --program-prefi | --program-pref \
    | --program-pre | --program-pr | --program-p)
      ac_prev=program_prefix ;;
    -program-prefix=* | --program-prefix=* | --program-prefi=* \
    | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-     program_prefix="$ac_optarg" ;;
+     program_prefix=$ac_optarg ;;
    -program-suffix | --program-suffix | --program-suffi | --program-suff \
    | --program-suf | --program-su | --program-s)
      ac_prev=program_suffix ;;
    -program-suffix=* | --program-suffix=* | --program-suffi=* \
    | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-     program_suffix="$ac_optarg" ;;
+     program_suffix=$ac_optarg ;;
    -program-transform-name | --program-transform-name \
    | --program-transform-nam | --program-transform-na \
-Line 271 
 EOF
+Line 514 
 EOF
    | --program-transfo=* | --program-transf=* \
    | --program-trans=* | --program-tran=* \
    | --progr-tra=* | --program-tr=* | --program-t=*)
-     program_transform_name="$ac_optarg" ;;
+     program_transform_name=$ac_optarg ;;
    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
    | -silent | --silent | --silen | --sile | --sil)
-Line 281 
 EOF
+Line 524 
 EOF
      ac_prev=sbindir ;;
    -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
    | --sbi=* | --sb=*)
-     sbindir="$ac_optarg" ;;
+     sbindir=$ac_optarg ;;
    -sharedstatedir | --sharedstatedir | --sharedstatedi \
    | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-Line 292 
 EOF
+Line 535 
 EOF
    | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
    | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
    | --sha=* | --sh=*)
-     sharedstatedir="$ac_optarg" ;;
+     sharedstatedir=$ac_optarg ;;
    -site | --site | --sit)
      ac_prev=site ;;
    -site=* | --site=* | --sit=*)
-     site="$ac_optarg" ;;
+     site=$ac_optarg ;;
    -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
      ac_prev=srcdir ;;
    -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-     srcdir="$ac_optarg" ;;
+     srcdir=$ac_optarg ;;
    -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
    | --syscon | --sysco | --sysc | --sys | --sy)
      ac_prev=sysconfdir ;;
    -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
    | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-     sysconfdir="$ac_optarg" ;;
+     sysconfdir=$ac_optarg ;;
    -target | --target | --targe | --targ | --tar | --ta | --t)
-     ac_prev=target ;;
+     ac_prev=target_alias ;;
    -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-     target="$ac_optarg" ;;
+     target_alias=$ac_optarg ;;
    -v | -verbose | --verbose | --verbos | --verbo | --verb)
      verbose=yes ;;
-   -version | --version | --versio | --versi | --vers)
+   -version | --version | --versio | --versi | --vers | -V)
-     echo "configure generated by autoconf version 2.13"
+     ac_init_version=: ;;
-     exit 0 ;;
    -with-* | --with-*)
-     ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
+     ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
      # Reject names that are not valid shell variable names.
-     if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
+     expr "x$ac_package" : ".*[^-_$ac_cr_alnum]" >/dev/null &&
-       { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+       { echo "$as_me: error: invalid package name: $ac_package" >&2
-     fi
+    { (exit 1); exit 1; }; }
      ac_package=`echo $ac_package| sed 's/-/_/g'`
-     case "$ac_option" in
+     case $ac_option in
-       *=*) ;;
+       *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
        *) ac_optarg=yes ;;
      esac
-     eval "with_${ac_package}='$ac_optarg'" ;;
+     eval "with_$ac_package='$ac_optarg'" ;;
    -without-* | --without-*)
-     ac_package=`echo $ac_option|sed -e 's/-*without-//'`
+     ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
      # Reject names that are not valid shell variable names.
-     if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
+     expr "x$ac_package" : ".*[^-_$ac_cr_alnum]" >/dev/null &&
-       { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+       { echo "$as_me: error: invalid package name: $ac_package" >&2
-     fi
+    { (exit 1); exit 1; }; }
-     ac_package=`echo $ac_package| sed 's/-/_/g'`
+     ac_package=`echo $ac_package | sed 's/-/_/g'`
-     eval "with_${ac_package}=no" ;;
+     eval "with_$ac_package=no" ;;
    --x)
      # Obsolete; use --with-x.
-Line 354 
 EOF
+Line 596 
 EOF
      ac_prev=x_includes ;;
    -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
    | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-     x_includes="$ac_optarg" ;;
+     x_includes=$ac_optarg ;;
    -x-libraries | --x-libraries | --x-librarie | --x-librari \
    | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
      ac_prev=x_libraries ;;
    -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
    | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-     x_libraries="$ac_optarg" ;;
+     x_libraries=$ac_optarg ;;
-   -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
+   -*) { echo "$as_me: error: unrecognized option: $ac_option
+ Try \`$0 --help' for more information." >&2
+    { (exit 1); exit 1; }; }
      ;;
+   *=*)
+     ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+     # Reject names that are not valid shell variable names.
+     expr "x$ac_envvar" : ".*[^_$ac_cr_alnum]" >/dev/null &&
+       { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+    { (exit 1); exit 1; }; }
+     ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
+     eval "$ac_envvar='$ac_optarg'"
+     export $ac_envvar ;;
    *)
-     if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
+     # FIXME: should be removed in autoconf 3.0.
-       echo "configure: warning: $ac_option: invalid host type" 1>&2
+     echo "$as_me: WARNING: you should use --build, --host, --target" >&2
-     fi
+     expr "x$ac_option" : ".*[^-._$ac_cr_alnum]" >/dev/null &&
-     if test "x$nonopt" != xNONE; then
+       echo "$as_me: WARNING: invalid host type: $ac_option" >&2
-       { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
+     : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
-     fi
-     nonopt="$ac_option"
      ;;
    esac
  done
  if test -n "$ac_prev"; then
-   { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
+   ac_option=--`echo $ac_prev | sed 's/_/-/g'`
- fi
+   { echo "$as_me: error: missing argument to $ac_option" >&2
+    { (exit 1); exit 1; }; }
- trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
- # File descriptor usage:
- # 0 standard input
- # 1 file creation
- # 2 errors and warnings
- # 3 some systems may open it to /dev/tty
- # 4 used on the Kubota Titan
- # 6 checking for... messages and results
- # 5 compiler messages saved in config.log
- if test "$silent" = yes; then
-   exec 6>/dev/null
- else
-   exec 6>&1
  fi
- exec 5>./config.log
- echo "\
- This file contains any messages produced by compilers while
- running configure, to aid debugging if configure makes a mistake.
- " 1>&5
- # Strip out --no-create and --no-recursion so they do not pile up.
+ # Be sure to have absolute paths.
- # Also quote any args containing shell metacharacters.
+ for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
- ac_configure_args=
+               localstatedir libdir includedir oldincludedir infodir mandir \
- for ac_arg
+               exec_prefix prefix
  do
-   case "$ac_arg" in
+   eval ac_val=$`echo $ac_var`
-   -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+   case $ac_val in
-   | --no-cr | --no-c) ;;
+     [\\/$]* | ?:[\\/]* ) ;;
-   -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+     NONE ) ;;
-   | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
+     *)  { echo "$as_me: error: expected an absolute path for --$ac_var: $ac_val" >&2
-   *" "*|*"      "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+    { (exit 1); exit 1; }; };;
-   ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-   *) ac_configure_args="$ac_configure_args $ac_arg" ;;
    esac
  done
- # NLS nuisances.
+ # There might be people who depend on the old broken behavior: `$host'
- # Only set these to C if already set.  These must not be set unconditionally
+ # used to hold the argument of --host etc.
- # because not all systems understand e.g. LANG=C (notably SCO).
+ build=$build_alias
- # Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+ host=$host_alias
- # Non-C LC_CTYPE values break the ctype check.
+ target=$target_alias
- if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
- if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+ # FIXME: should be removed in autoconf 3.0.
- if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+ if test "x$host_alias" != x; then
- if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
+   if test "x$build_alias" = x; then
+     cross_compiling=maybe
+     echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+     If a cross compiler is detected then cross compile mode will be used." >&2
+   elif test "x$build_alias" != "x$host_alias"; then
+     cross_compiling=yes
+   fi
+ fi
- # confdefs.h avoids OS command line length limits that DEFS can exceed.
+ ac_tool_prefix=
- rm -rf conftest* confdefs.h
+ test -n "$host_alias" && ac_tool_prefix=$host_alias-
- # AIX cpp loses on an empty file, so make sure it contains at least a newline.
- echo > confdefs.h
- # A filename unique to this package, relative to the directory that
+ test "$silent" = yes && exec 6>/dev/null
- # configure is in, which we can look for to find out if srcdir is correct.
- ac_unique_file=dftables.c
  # Find the source files, if location was not specified.
  if test -z "$srcdir"; then
    ac_srcdir_defaulted=yes
    # Try the directory containing this script, then its parent.
    ac_prog=$0
-   ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
+   ac_confdir=`echo "$ac_prog" | sed 's%[\\/][^\\/][^\\/]*$%%'`
    test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
    srcdir=$ac_confdir
    if test ! -r $srcdir/$ac_unique_file; then
-Line 456 
 else
+Line 689 
 else
  fi
  if test ! -r $srcdir/$ac_unique_file; then
    if test "$ac_srcdir_defaulted" = yes; then
-     { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+     { echo "$as_me: error: cannot find sources in $ac_confdir or .." >&2
+    { (exit 1); exit 1; }; }
    else
-     { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+     { echo "$as_me: error: cannot find sources in $srcdir" >&2
+    { (exit 1); exit 1; }; }
    fi
  fi
- srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
+ srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
+ ac_env_build_alias_set=${build_alias+set}
+ ac_env_build_alias_value=$build_alias
+ ac_cv_env_build_alias_set=${build_alias+set}
+ ac_cv_env_build_alias_value=$build_alias
+ ac_env_host_alias_set=${host_alias+set}
+ ac_env_host_alias_value=$host_alias
+ ac_cv_env_host_alias_set=${host_alias+set}
+ ac_cv_env_host_alias_value=$host_alias
+ ac_env_target_alias_set=${target_alias+set}
+ ac_env_target_alias_value=$target_alias
+ ac_cv_env_target_alias_set=${target_alias+set}
+ ac_cv_env_target_alias_value=$target_alias
+ ac_env_CC_set=${CC+set}
+ ac_env_CC_value=$CC
+ ac_cv_env_CC_set=${CC+set}
+ ac_cv_env_CC_value=$CC
+ ac_env_CFLAGS_set=${CFLAGS+set}
+ ac_env_CFLAGS_value=$CFLAGS
+ ac_cv_env_CFLAGS_set=${CFLAGS+set}
+ ac_cv_env_CFLAGS_value=$CFLAGS
+ ac_env_LDFLAGS_set=${LDFLAGS+set}
+ ac_env_LDFLAGS_value=$LDFLAGS
+ ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
+ ac_cv_env_LDFLAGS_value=$LDFLAGS
+ ac_env_CPPFLAGS_set=${CPPFLAGS+set}
+ ac_env_CPPFLAGS_value=$CPPFLAGS
+ ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
+ ac_cv_env_CPPFLAGS_value=$CPPFLAGS
+ ac_env_CPP_set=${CPP+set}
+ ac_env_CPP_value=$CPP
+ ac_cv_env_CPP_set=${CPP+set}
+ ac_cv_env_CPP_value=$CPP
+ #
+ # Report the --help message.
+ #
+ if test "$ac_init_help" = "long"; then
+   # Omit some internal or obsolete options to make the list less imposing.
+     # The list generated by autoconf has been trimmed to remove many
+     # options that are totally irrelevant to PCRE (e.g. relating to X),
+     # or are not supported by its Makefile.
+     # The list generated by autoconf has been trimmed to remove many
+     # options that are totally irrelevant to PCRE (e.g. relating to X),
+     # or are not supported by its Makefile.
+     # The list generated by autoconf has been trimmed to remove many
+     # options that are totally irrelevant to PCRE (e.g. relating to X),
+     # or are not supported by its Makefile.
+     # The list generated by autoconf has been trimmed to remove many
+     # options that are totally irrelevant to PCRE (e.g. relating to X),
+     # or are not supported by its Makefile.
+   # This message is too long to be a string in the A/UX 3.1 sh.
+   cat <<EOF
+ \`configure' configures this package to adapt to many kinds of systems.
+ Usage: $0 [OPTION]... [VAR=VALUE]...
+ To assign environment variables (e.g., CC, CFLAGS...), specify them as
+ VAR=VALUE.  See below for descriptions of some of the useful variables.
+ Defaults for the options are specified in brackets.
+ Configuration:
+   -h, --help              display this help and exit
+       --help=short        display options specific to this package
+       --help=recursive    display the short help of all the included packages
+   -V, --version           display version information and exit
+   -q, --quiet, --silent   do not print \`checking...' messages
+       --cache-file=FILE   cache test results in FILE [disabled]
+   -C, --config-cache      alias for \`--cache-file=config.cache'
+   -n, --no-create         do not create output files
+       --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+ EOF
+   cat <<EOF
+ Installation directories:
+   --prefix=PREFIX         install architecture-independent files in PREFIX
+                           [$ac_default_prefix]
+   --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                           [PREFIX]
+ By default, \`make install' will install all the files in
+ \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+ an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+ for instance \`--prefix=\$HOME'.
+ For better control, use the options below.
+ Fine tuning of the installation directories:
+   --bindir=DIR           user executables [EPREFIX/bin]
+   --libdir=DIR           object code libraries [EPREFIX/lib]
+   --includedir=DIR       C header files [PREFIX/include]
+   --mandir=DIR           man documentation [PREFIX/man]
+ EOF
+   cat <<\EOF
+ EOF
+ fi
+ if test -n "$ac_init_help"; then
+   cat <<\EOF
+ Optional Features:
+   --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+   --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+   --enable-utf8           enable UTF8 support (incomplete)
+   --enable-newline-is-cr  use CR as the newline character
+   --enable-newline-is-lf  use LF as the newline character
+   --enable-shared       build shared libraries default=yes
+   --enable-static       build static libraries default=yes
+   --enable-fast-install       optimize for fast installation default=yes
+   --disable-libtool-lock  avoid locking (might break parallel builds)
+ Optional Packages:
+   --with-gnu-ld           assume the C compiler uses GNU ld default=no
+   --with-pic              try to use only PIC/non-PIC objects default=use both
+ Some influential environment variables:
+   CC          C compiler command
+   CFLAGS      C compiler flags
+   LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+               nonstandard directory <lib dir>
+   CPPFLAGS    C/C++ preprocessor flags, e.g. -I<include dir> if you have
+               headers in a nonstandard directory <include dir>
+   CPP         C preprocessor
+ Use these variables to override the choices made by `configure' or to help
+ it to find libraries and programs with nonstandard names/locations.
+ EOF
+ fi
+ if test "$ac_init_help" = "recursive"; then
+   # If there are subdirs, report their specific --help.
+   ac_popdir=`pwd`
+   for ac_subdir in : $ac_subdirs_all; do test "x$ac_subdir" = x: && continue
+     cd $ac_subdir
+     # A "../" for each directory in /$ac_subdir.
+     ac_dots=`echo $ac_subdir |
+              sed 's,^\./,,;s,[^/]$,&/,;s,[^/]*/,../,g'`
+     case $srcdir in
+     .) # No --srcdir option.  We are building in place.
+       ac_sub_srcdir=$srcdir ;;
+     [\\/]* | ?:[\\/]* ) # Absolute path.
+       ac_sub_srcdir=$srcdir/$ac_subdir ;;
+     *) # Relative path.
+       ac_sub_srcdir=$ac_dots$srcdir/$ac_subdir ;;
+     esac
+     # Check for guested configure; otherwise get Cygnus style configure.
+     if test -f $ac_sub_srcdir/configure.gnu; then
+       echo
+       $SHELL $ac_sub_srcdir/configure.gnu  --help=recursive
+     elif test -f $ac_sub_srcdir/configure; then
+       echo
+       $SHELL $ac_sub_srcdir/configure  --help=recursive
+     elif test -f $ac_sub_srcdir/configure.ac ||
+            test -f $ac_sub_srcdir/configure.in; then
+       echo
+       $ac_configure --help
+     else
+       echo "$as_me: WARNING: no configuration information is in $ac_subdir" >&2
+     fi
+     cd $ac_popdir
+   done
+ fi
+ test -n "$ac_init_help" && exit 0
+ if $ac_init_version; then
+   cat <<\EOF
+ Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
+ Free Software Foundation, Inc.
+ This configure script is free software; the Free Software Foundation
+ gives unlimited permission to copy, distribute and modify it.
+ EOF
+   exit 0
+ fi
+ exec 5>config.log
+ cat >&5 <<EOF
+ This file contains any messages produced by compilers while
+ running configure, to aid debugging if configure makes a mistake.
+ It was created by $as_me, which was
+ generated by GNU Autoconf 2.50.  Invocation command line was
+   $ $0 $@
+ EOF
+ {
+ cat <<_ASUNAME
+ ## ---------- ##
+ ## Platform.  ##
+ ## ---------- ##
+ hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+ uname -m = `(uname -m) 2>/dev/null || echo unknown`
+ uname -r = `(uname -r) 2>/dev/null || echo unknown`
+ uname -s = `(uname -s) 2>/dev/null || echo unknown`
+ uname -v = `(uname -v) 2>/dev/null || echo unknown`
+ /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+ /bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+ /bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+ /usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+ /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+ hostinfo               = `(hostinfo) 2>/dev/null               || echo unknown`
+ /bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+ /usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+ /bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+ PATH = $PATH
+ _ASUNAME
+ } >&5
+ cat >&5 <<EOF
+ ## ------------ ##
+ ## Core tests.  ##
+ ## ------------ ##
+ EOF
+ # Keep a trace of the command line.
+ # Strip out --no-create and --no-recursion so they do not pile up.
+ # Also quote any args containing shell meta-characters.
+ ac_configure_args=
+ ac_sep=
+ for ac_arg
+ do
+   case $ac_arg in
+   -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+   | --no-cr | --no-c) ;;
+   -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+   | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
+   *" "*|*"      "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+     ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"`
+     ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
+     ac_sep=" " ;;
+   *) ac_configure_args="$ac_configure_args$ac_sep$ac_arg"
+      ac_sep=" " ;;
+   esac
+   # Get rid of the leading space.
+ done
+ # When interrupted or exit'd, cleanup temporary files, and complete
+ # config.log.  We remove comments because anyway the quotes in there
+ # would cause problems or look ugly.
+ trap 'exit_status=$?
+   # Save into config.log some information that might help in debugging.
+   echo >&5
+   echo "## ----------------- ##" >&5
+   echo "## Cache variables.  ##" >&5
+   echo "## ----------------- ##" >&5
+   echo >&5
+   # The following way of writing the cache mishandles newlines in values,
+ {
+   (set) 2>&1 |
+     case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
+     *ac_space=\ *)
+       sed -n \
+         "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
+           s/^\\([_$ac_cr_alnum]*_cv_[_$ac_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
+       ;;
+     *)
+       sed -n \
+         "s/^\\([_$ac_cr_alnum]*_cv_[_$ac_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+       ;;
+     esac;
+ } >&5
+   sed "/^$/d" confdefs.h >conftest.log
+   if test -s conftest.log; then
+     echo >&5
+     echo "## ------------ ##" >&5
+     echo "## confdefs.h.  ##" >&5
+     echo "## ------------ ##" >&5
+     echo >&5
+     cat conftest.log >&5
+   fi
+   (echo; echo) >&5
+   test "$ac_signal" != 0 &&
+     echo "$as_me: caught signal $ac_signal" >&5
+   echo "$as_me: exit $exit_status" >&5
+   rm -rf conftest* confdefs* core core.* *.core conf$$* $ac_clean_files &&
+     exit $exit_status
+      ' 0
+ for ac_signal in 1 2 13 15; do
+   trap 'ac_status=$?; ac_signal='$ac_signal'; { (exit $ac_status); exit $ac_status; }' $ac_signal
+ done
+ ac_signal=0
+ # confdefs.h avoids OS command line length limits that DEFS can exceed.
+ rm -rf conftest* confdefs.h
+ # AIX cpp loses on an empty file, so make sure it contains at least a newline.
+ echo >confdefs.h
+ # Let the site file select an alternate cache file if it wants to.
  # Prefer explicitly selected file to automatically selected ones.
  if test -z "$CONFIG_SITE"; then
    if test "x$prefix" != xNONE; then
-Line 473 
 if test -z "$CONFIG_SITE"; then
+Line 1008 
 if test -z "$CONFIG_SITE"; then
  fi
  for ac_site_file in $CONFIG_SITE; do
    if test -r "$ac_site_file"; then
-     echo "loading site script $ac_site_file"
+     { echo "$as_me:1012: loading site script $ac_site_file" >&5
+ echo "$as_me: loading site script $ac_site_file" >&6;}
+     cat "$ac_site_file" >&5
      . "$ac_site_file"
    fi
  done
  if test -r "$cache_file"; then
-   echo "loading cache $cache_file"
+   # Some versions of bash will fail to source /dev/null (special
-   . $cache_file
+   # files actually), so we avoid doing that.
+   if test -f "$cache_file"; then
+     { echo "$as_me:1023: loading cache $cache_file" >&5
+ echo "$as_me: loading cache $cache_file" >&6;}
+     case $cache_file in
+       [\\/]* | ?:[\\/]* ) . $cache_file;;
+       *)                      . ./$cache_file;;
+     esac
+   fi
  else
-   echo "creating cache $cache_file"
+   { echo "$as_me:1031: creating cache $cache_file" >&5
-   > $cache_file
+ echo "$as_me: creating cache $cache_file" >&6;}
+   >$cache_file
+ fi
+ # Check that the precious variables saved in the cache have kept the same
+ # value.
+ ac_suggest_removing_cache=false
+ for ac_var in `(set) 2>&1 |
+                sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
+   eval ac_old_set=\$ac_cv_env_${ac_var}_set
+   eval ac_new_set=\$ac_env_${ac_var}_set
+   eval ac_old_val="\$ac_cv_env_${ac_var}_value"
+   eval ac_new_val="\$ac_env_${ac_var}_value"
+   case $ac_old_set,$ac_new_set in
+     set,)
+       { echo "$as_me:1047: WARNING: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+ echo "$as_me: WARNING: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+       ac_suggest_removing_cache=: ;;
+     ,set)
+       { echo "$as_me:1051: WARNING: \`$ac_var' was not set in the previous run" >&5
+ echo "$as_me: WARNING: \`$ac_var' was not set in the previous run" >&2;}
+       ac_suggest_removing_cache=: ;;
+     ,);;
+     *)
+       if test "x$ac_old_val" != "x$ac_new_val"; then
+         { echo "$as_me:1057: WARNING: \`$ac_var' has changed since the previous run:" >&5
+ echo "$as_me: WARNING: \`$ac_var' has changed since the previous run:" >&2;}
+         { echo "$as_me:1059: WARNING:   former value:  $ac_old_val" >&5
+ echo "$as_me: WARNING:   former value:  $ac_old_val" >&2;}
+         { echo "$as_me:1061: WARNING:   current value: $ac_new_val" >&5
+ echo "$as_me: WARNING:   current value: $ac_new_val" >&2;}
+         ac_suggest_removing_cache=:
+       fi;;
+   esac
+ done
+ if $ac_suggest_removing_cache; then
+   { echo "$as_me:1068: WARNING: changes in the environment can compromise the build" >&5
+ echo "$as_me: WARNING: changes in the environment can compromise the build" >&2;}
+   { echo "$as_me:1070: WARNING: consider removing $cache_file and starting over" >&5
+ echo "$as_me: WARNING: consider removing $cache_file and starting over" >&2;}
  fi
  ac_ext=c
- # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
  ac_cpp='$CPP $CPPFLAGS'
- ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
- ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
- cross_compiling=$ac_cv_prog_cc_cross
+ ac_compiler_gnu=$ac_cv_c_compiler_gnu
- ac_exeext=
+ case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
- ac_objext=o
+   *c*,-n*) ECHO_N= ECHO_C='
- if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+ ' ECHO_T='      ' ;;
-   # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+   *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-   if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+   *)      ECHO_N= ECHO_C='\c' ECHO_T= ;;
-     ac_n= ac_c='
+ esac
- ' ac_t='        '
+ echo "#! $SHELL" >conftest.sh
-   else
+ echo  "exit 0"   >>conftest.sh
-     ac_n=-n ac_c= ac_t=
+ chmod +x conftest.sh
-   fi
+ if { (echo "$as_me:1089: PATH=\".;.\"; conftest.sh") >&5
+   (PATH=".;."; conftest.sh) 2>&5
+   ac_status=$?
+   echo "$as_me:1092: \$? = $ac_status" >&5
+   (exit $ac_status); }; then
+   ac_path_separator=';'
  else
-   ac_n= ac_c='\c' ac_t=
+   ac_path_separator=:
  fi
+ PATH_SEPARATOR="$ac_path_separator"
+ rm -f conftest.sh
+ ac_config_headers="$ac_config_headers config.h:config.in"
  PCRE_MAJOR=3
- PCRE_MINOR=4
+ PCRE_MINOR=5
- PCRE_DATE=22-Aug-2000
+ PCRE_DATE=15-Aug-2001
  PCRE_VERSION=${PCRE_MAJOR}.${PCRE_MINOR}
  PCRE_LIB_VERSION=0:1:0
  PCRE_POSIXLIB_VERSION=0:0:0
+ ac_ext=c
+ ac_cpp='$CPP $CPPFLAGS'
+ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ ac_compiler_gnu=$ac_cv_c_compiler_gnu
+ if test -n "$ac_tool_prefix"; then
+   # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}gcc; ac_word=$2
+ echo "$as_me:1119: checking for $ac_word" >&5
+ echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+ if test "${ac_cv_prog_CC+set}" = set; then
+   echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+   if test -n "$CC"; then
+   ac_cv_prog_CC="$CC" # Let the user override the test.
+ else
+   ac_save_IFS=$IFS; IFS=$ac_path_separator
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+   IFS=$ac_save_IFS
+   test -z "$ac_dir" && ac_dir=.
+   $as_executable_p "$ac_dir/$ac_word" || continue
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ echo "$as_me:1134: found $ac_dir/$ac_word" >&5
+ break
+ done
+ fi
+ fi
+ CC=$ac_cv_prog_CC
+ if test -n "$CC"; then
+   echo "$as_me:1142: result: $CC" >&5
+ echo "${ECHO_T}$CC" >&6
+ else
+   echo "$as_me:1145: result: no" >&5
+ echo "${ECHO_T}no" >&6
+ fi
- # Extract the first word of "gcc", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_CC"; then
+   ac_ct_CC=$CC
+   # Extract the first word of "gcc", so it can be a program name with args.
  set dummy gcc; ac_word=$2
- echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+ echo "$as_me:1154: checking for $ac_word" >&5
- echo "configure:546: checking for $ac_word" >&5
+ echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
- if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-   echo $ac_n "(cached) $ac_c" 1>&6
+   echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+   if test -n "$ac_ct_CC"; then
+   ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+ else
+   ac_save_IFS=$IFS; IFS=$ac_path_separator
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+   IFS=$ac_save_IFS
+   test -z "$ac_dir" && ac_dir=.
+   $as_executable_p "$ac_dir/$ac_word" || continue
+ ac_cv_prog_ac_ct_CC="gcc"
+ echo "$as_me:1169: found $ac_dir/$ac_word" >&5
+ break
+ done
+ fi
+ fi
+ ac_ct_CC=$ac_cv_prog_ac_ct_CC
+ if test -n "$ac_ct_CC"; then
+   echo "$as_me:1177: result: $ac_ct_CC" >&5
+ echo "${ECHO_T}$ac_ct_CC" >&6
+ else
+   echo "$as_me:1180: result: no" >&5
+ echo "${ECHO_T}no" >&6
+ fi
+   CC=$ac_ct_CC
+ else
+   CC="$ac_cv_prog_CC"
+ fi
+ if test -z "$CC"; then
+   if test -n "$ac_tool_prefix"; then
+   # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}cc; ac_word=$2
+ echo "$as_me:1193: checking for $ac_word" >&5
+ echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+ if test "${ac_cv_prog_CC+set}" = set; then
+   echo $ECHO_N "(cached) $ECHO_C" >&6
  else
    if test -n "$CC"; then
    ac_cv_prog_CC="$CC" # Let the user override the test.
  else
-   IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
+   ac_save_IFS=$IFS; IFS=$ac_path_separator
-   ac_dummy="$PATH"
+ ac_dummy="$PATH"
-   for ac_dir in $ac_dummy; do
+ for ac_dir in $ac_dummy; do
-     test -z "$ac_dir" && ac_dir=.
+   IFS=$ac_save_IFS
-     if test -f $ac_dir/$ac_word; then
+   test -z "$ac_dir" && ac_dir=.
-       ac_cv_prog_CC="gcc"
+   $as_executable_p "$ac_dir/$ac_word" || continue
-       break
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
-     fi
+ echo "$as_me:1208: found $ac_dir/$ac_word" >&5
-   done
+ break
-   IFS="$ac_save_ifs"
+ done
  fi
  fi
- CC="$ac_cv_prog_CC"
+ CC=$ac_cv_prog_CC
  if test -n "$CC"; then
-   echo "$ac_t""$CC" 1>&6
+   echo "$as_me:1216: result: $CC" >&5
+ echo "${ECHO_T}$CC" >&6
+ else
+   echo "$as_me:1219: result: no" >&5
+ echo "${ECHO_T}no" >&6
+ fi
+ fi
+ if test -z "$ac_cv_prog_CC"; then
+   ac_ct_CC=$CC
+   # Extract the first word of "cc", so it can be a program name with args.
+ set dummy cc; ac_word=$2
+ echo "$as_me:1228: checking for $ac_word" >&5
+ echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+ if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+   echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+   if test -n "$ac_ct_CC"; then
+   ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+ else
+   ac_save_IFS=$IFS; IFS=$ac_path_separator
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+   IFS=$ac_save_IFS
+   test -z "$ac_dir" && ac_dir=.
+   $as_executable_p "$ac_dir/$ac_word" || continue
+ ac_cv_prog_ac_ct_CC="cc"
+ echo "$as_me:1243: found $ac_dir/$ac_word" >&5
+ break
+ done
+ fi
+ fi
+ ac_ct_CC=$ac_cv_prog_ac_ct_CC
+ if test -n "$ac_ct_CC"; then
+   echo "$as_me:1251: result: $ac_ct_CC" >&5
+ echo "${ECHO_T}$ac_ct_CC" >&6
+ else
+   echo "$as_me:1254: result: no" >&5
+ echo "${ECHO_T}no" >&6
+ fi
+   CC=$ac_ct_CC
  else
-   echo "$ac_t""no" 1>&6
+   CC="$ac_cv_prog_CC"
  fi
+ fi
  if test -z "$CC"; then
    # Extract the first word of "cc", so it can be a program name with args.
  set dummy cc; ac_word=$2
- echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+ echo "$as_me:1267: checking for $ac_word" >&5
- echo "configure:576: checking for $ac_word" >&5
+ echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
- if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ if test "${ac_cv_prog_CC+set}" = set; then
-   echo $ac_n "(cached) $ac_c" 1>&6
+   echo $ECHO_N "(cached) $ECHO_C" >&6
  else
    if test -n "$CC"; then
    ac_cv_prog_CC="$CC" # Let the user override the test.
  else
-   IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
    ac_prog_rejected=no
-   ac_dummy="$PATH"
+   ac_save_IFS=$IFS; IFS=$ac_path_separator
-   for ac_dir in $ac_dummy; do
+ ac_dummy="$PATH"
-     test -z "$ac_dir" && ac_dir=.
+ for ac_dir in $ac_dummy; do
-     if test -f $ac_dir/$ac_word; then
+   IFS=$ac_save_IFS
-       if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
+   test -z "$ac_dir" && ac_dir=.
-         ac_prog_rejected=yes
+   $as_executable_p "$ac_dir/$ac_word" || continue
-         continue
+ if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-       fi
+   ac_prog_rejected=yes
-       ac_cv_prog_CC="cc"
+   continue
-       break
+ fi
-     fi
+ ac_cv_prog_CC="cc"
-   done
+ echo "$as_me:1287: found $ac_dir/$ac_word" >&5
-   IFS="$ac_save_ifs"
+ break
+ done
  if test $ac_prog_rejected = yes; then
    # We found a bogon in the path, so make sure we never use it.
    set dummy $ac_cv_prog_CC
    shift
-   if test $# -gt 0; then
+   if test $# != 0; then
      # We chose a different compiler from the bogus one.
      # However, it has the same basename, so the bogon will be chosen
      # first if we set CC to just the basename; use the full file name.
      shift
-     set dummy "$ac_dir/$ac_word" "$@"
+     set dummy "$ac_dir/$ac_word" ${1+"$@"}
      shift
      ac_cv_prog_CC="$@"
    fi
  fi
  fi
  fi
- CC="$ac_cv_prog_CC"
+ CC=$ac_cv_prog_CC
  if test -n "$CC"; then
-   echo "$ac_t""$CC" 1>&6
+   echo "$as_me:1309: result: $CC" >&5
+ echo "${ECHO_T}$CC" >&6
  else
-   echo "$ac_t""no" 1>&6
+   echo "$as_me:1312: result: no" >&5
+ echo "${ECHO_T}no" >&6
  fi
-   if test -z "$CC"; then
+ fi
-     case "`uname -s`" in
+ if test -z "$CC"; then
-     *win32* | *WIN32*)
+   if test -n "$ac_tool_prefix"; then
-       # Extract the first word of "cl", so it can be a program name with args.
+   for ac_prog in cl
- set dummy cl; ac_word=$2
+   do
- echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+     # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
- echo "configure:627: checking for $ac_word" >&5
+ set dummy $ac_tool_prefix$ac_prog; ac_word=$2
- if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo "$as_me:1323: checking for $ac_word" >&5
-   echo $ac_n "(cached) $ac_c" 1>&6
+ echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+ if test "${ac_cv_prog_CC+set}" = set; then
+   echo $ECHO_N "(cached) $ECHO_C" >&6
  else
    if test -n "$CC"; then
    ac_cv_prog_CC="$CC" # Let the user override the test.
  else
-   IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
+   ac_save_IFS=$IFS; IFS=$ac_path_separator
-   ac_dummy="$PATH"
+ ac_dummy="$PATH"
-   for ac_dir in $ac_dummy; do
+ for ac_dir in $ac_dummy; do
-     test -z "$ac_dir" && ac_dir=.
+   IFS=$ac_save_IFS
-     if test -f $ac_dir/$ac_word; then
+   test -z "$ac_dir" && ac_dir=.
-       ac_cv_prog_CC="cl"
+   $as_executable_p "$ac_dir/$ac_word" || continue
-       break
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-     fi
+ echo "$as_me:1338: found $ac_dir/$ac_word" >&5
-   done
+ break
-   IFS="$ac_save_ifs"
+ done
  fi
  fi
- CC="$ac_cv_prog_CC"
+ CC=$ac_cv_prog_CC
  if test -n "$CC"; then
-   echo "$ac_t""$CC" 1>&6
+   echo "$as_me:1346: result: $CC" >&5
+ echo "${ECHO_T}$CC" >&6
  else
-   echo "$ac_t""no" 1>&6
+   echo "$as_me:1349: result: no" >&5
+ echo "${ECHO_T}no" >&6
+ fi
+     test -n "$CC" && break
+   done
+ fi
+ if test -z "$CC"; then
+   ac_ct_CC=$CC
+   for ac_prog in cl
+ do
+   # Extract the first word of "$ac_prog", so it can be a program name with args.
+ set dummy $ac_prog; ac_word=$2
+ echo "$as_me:1362: checking for $ac_word" >&5
+ echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+ if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+   echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+   if test -n "$ac_ct_CC"; then
+   ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+ else
+   ac_save_IFS=$IFS; IFS=$ac_path_separator
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+   IFS=$ac_save_IFS
+   test -z "$ac_dir" && ac_dir=.
+   $as_executable_p "$ac_dir/$ac_word" || continue
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+ echo "$as_me:1377: found $ac_dir/$ac_word" >&5
+ break
+ done
  fi
-  ;;
+ fi
-     esac
+ ac_ct_CC=$ac_cv_prog_ac_ct_CC
-   fi
+ if test -n "$ac_ct_CC"; then
-   test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
+   echo "$as_me:1385: result: $ac_ct_CC" >&5
+ echo "${ECHO_T}$ac_ct_CC" >&6
+ else
+   echo "$as_me:1388: result: no" >&5
+ echo "${ECHO_T}no" >&6
  fi
- echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+   test -n "$ac_ct_CC" && break
- echo "configure:659: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+ done
- ac_ext=c
+   CC=$ac_ct_CC
- # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ fi
- ac_cpp='$CPP $CPPFLAGS'
- ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ fi
- ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
- cross_compiling=$ac_cv_prog_cc_cross
- cat > conftest.$ac_ext << EOF
+ test -z "$CC" && { { echo "$as_me:1400: error: no acceptable cc found in \$PATH" >&5
+ echo "$as_me: error: no acceptable cc found in \$PATH" >&2;}
+    { (exit 1); exit 1; }; }
- #line 670 "configure"
+ cat >conftest.$ac_ext <<_ACEOF
+ #line 1405 "configure"
  #include "confdefs.h"
- main(){return(0);}
+ int
- EOF
+ main ()
- if { (eval echo configure:675: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ {
-   ac_cv_prog_cc_works=yes
-   # If we can't run a trivial program, we are probably using a cross compiler.
+   ;
-   if (./conftest; exit) 2>/dev/null; then
+   return 0;
-     ac_cv_prog_cc_cross=no
+ }
+ _ACEOF
+ ac_clean_files_save=$ac_clean_files
+ ac_clean_files="$ac_clean_files a.out a.exe"
+ # Try to create an executable without -o first, disregard a.out.
+ # It will help us diagnose broken compiler, and finding out an intuition
+ # of exeext.
+ echo "$as_me:1421: checking for C compiler default output" >&5
+ echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6
+ ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+ if { (eval echo "$as_me:1424: \"$ac_link_default\"") >&5
+   (eval $ac_link_default) 2>&5
+   ac_status=$?
+   echo "$as_me:1427: \$? = $ac_status" >&5
+   (exit $ac_status); }; then
+   for ac_file in `ls a.exe conftest.exe a.* conftest conftest.* 2>/dev/null`; do
+   case $ac_file in
+     *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb ) ;;
+     a.out ) # We found the default executable, but exeext='' is most
+             # certainly right.
+             break;;
+     *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+           export ac_cv_exeext
+           break;;
+     * ) break;;
+   esac
+ done
+ else
+   echo "$as_me: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ { { echo "$as_me:1444: error: C compiler cannot create executables" >&5
+ echo "$as_me: error: C compiler cannot create executables" >&2;}
+    { (exit 77); exit 77; }; }
+ fi
+ ac_exeext=$ac_cv_exeext
+ echo "$as_me:1450: result: $ac_file" >&5
+ echo "${ECHO_T}$ac_file" >&6
+ # Check the compiler produces executables we can run.  If not, either
+ # the compiler is broken, or we cross compile.
+ echo "$as_me:1455: checking whether the C compiler works" >&5
+ echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
+ # FIXME: These cross compiler hacks should be removed for Autoconf 3.0
+ # If not cross compiling, check that we can run a simple program.
+ if test "$cross_compiling" != yes; then
+   if { ac_try='./$ac_file'
+   { (eval echo "$as_me:1461: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+   echo "$as_me:1464: \$? = $ac_status" >&5
+   (exit $ac_status); }; }; then
+     cross_compiling=no
    else
-     ac_cv_prog_cc_cross=yes
+     if test "$cross_compiling" = maybe; then
+         cross_compiling=yes
+     else
+         { { echo "$as_me:1471: error: cannot run C compiled programs.
+ If you meant to cross compile, use \`--host'." >&5
+ echo "$as_me: error: cannot run C compiled programs.
+ If you meant to cross compile, use \`--host'." >&2;}
+    { (exit 1); exit 1; }; }
+     fi
    fi
- else
-   echo "configure: failed program was:" >&5
-   cat conftest.$ac_ext >&5
-   ac_cv_prog_cc_works=no
- fi
- rm -fr conftest*
- ac_ext=c
- # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
- ac_cpp='$CPP $CPPFLAGS'
- ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
- ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
- cross_compiling=$ac_cv_prog_cc_cross
- echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
- if test $ac_cv_prog_cc_works = no; then
-   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
  fi
- echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+ echo "$as_me:1479: result: yes" >&5
- echo "configure:701: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+ echo "${ECHO_T}yes" >&6
- echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
- cross_compiling=$ac_cv_prog_cc_cross
- echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
+ rm -f a.out a.exe conftest$ac_cv_exeext
- echo "configure:706: checking whether we are using GNU C" >&5
+ ac_clean_files=$ac_clean_files_save
- if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
+ # Check the compiler produces executables we can run.  If not, either
-   echo $ac_n "(cached) $ac_c" 1>&6
+ # the compiler is broken, or we cross compile.
+ echo "$as_me:1486: checking whether we are cross compiling" >&5
+ echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
+ echo "$as_me:1488: result: $cross_compiling" >&5
+ echo "${ECHO_T}$cross_compiling" >&6
+ echo "$as_me:1491: checking for executable suffix" >&5
+ echo $ECHO_N "checking for executable suffix... $ECHO_C" >&6
+ if { (eval echo "$as_me:1493: \"$ac_link\"") >&5
+   (eval $ac_link) 2>&5
+   ac_status=$?
+   echo "$as_me:1496: \$? = $ac_status" >&5
+   (exit $ac_status); }; then
+   # If both `conftest.exe' and `conftest' are `present' (well, observable)
+ # catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
+ # work properly (i.e., refer to `conftest.exe'), while it won't with
+ # `rm'.
+ for ac_file in `(ls conftest.exe; ls conftest; ls conftest.*) 2>/dev/null`; do
+   case $ac_file in
+     *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb ) ;;
+     *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+           export ac_cv_exeext
+           break;;
+     * ) break;;
+   esac
+ done
  else
-   cat > conftest.c <<EOF
+   { { echo "$as_me:1512: error: cannot compute EXEEXT: cannot compile and link" >&5
- #ifdef __GNUC__
+ echo "$as_me: error: cannot compute EXEEXT: cannot compile and link" >&2;}
-   yes;
+    { (exit 1); exit 1; }; }
- #endif
+ fi
- EOF
- if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:715: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+ rm -f conftest$ac_cv_exeext
-   ac_cv_prog_gcc=yes
+ echo "$as_me:1518: result: $ac_cv_exeext" >&5
+ echo "${ECHO_T}$ac_cv_exeext" >&6
+ rm -f conftest.$ac_ext
+ EXEEXT=$ac_cv_exeext
+ ac_exeext=$EXEEXT
+ echo "$as_me:1524: checking for object suffix" >&5
+ echo $ECHO_N "checking for object suffix... $ECHO_C" >&6
+ if test "${ac_cv_objext+set}" = set; then
+   echo $ECHO_N "(cached) $ECHO_C" >&6
  else
-   ac_cv_prog_gcc=no
+   cat >conftest.$ac_ext <<_ACEOF
- fi
+ #line 1530 "configure"
- fi
+ #include "confdefs.h"
- echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+ int
+ main ()
+ {
- if test $ac_cv_prog_gcc = yes; then
+   ;
-   GCC=yes
+   return 0;
+ }
+ _ACEOF
+ rm -f conftest.o conftest.obj
+ if { (eval echo "$as_me:1542: \"$ac_compile\"") >&5
+   (eval $ac_compile) 2>&5
+   ac_status=$?
+   echo "$as_me:1545: \$? = $ac_status" >&5
+   (exit $ac_status); }; then
+   for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
+   case $ac_file in
+     *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb ) ;;
+     *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+        break;;
+   esac
+ done
  else
-   GCC=
+   echo "$as_me: failed program was:" >&5
- fi
+ cat conftest.$ac_ext >&5
+ { { echo "$as_me:1557: error: cannot compute OBJEXT: cannot compile" >&5
+ echo "$as_me: error: cannot compute OBJEXT: cannot compile" >&2;}
+    { (exit 1); exit 1; }; }
+ fi
+ rm -f conftest.$ac_cv_objext conftest.$ac_ext
+ fi
+ echo "$as_me:1564: result: $ac_cv_objext" >&5
+ echo "${ECHO_T}$ac_cv_objext" >&6
+ OBJEXT=$ac_cv_objext
+ ac_objext=$OBJEXT
+ echo "$as_me:1568: checking whether we are using the GNU C compiler" >&5
+ echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
+ if test "${ac_cv_c_compiler_gnu+set}" = set; then
+   echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+   cat >conftest.$ac_ext <<_ACEOF
+ #line 1574 "configure"
+ #include "confdefs.h"
- ac_test_CFLAGS="${CFLAGS+set}"
+ int
- ac_save_CFLAGS="$CFLAGS"
+ main ()
- CFLAGS=
+ {
- echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+ #ifndef __GNUC__
- echo "configure:734: checking whether ${CC-cc} accepts -g" >&5
+        choke me
- if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+ #endif
-   echo $ac_n "(cached) $ac_c" 1>&6
+   ;
+   return 0;
+ }
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:1589: \"$ac_compile\"") >&5
+   (eval $ac_compile) 2>&5
+   ac_status=$?
+   echo "$as_me:1592: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+          { ac_try='test -s conftest.$ac_objext'
+   { (eval echo "$as_me:1595: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+   echo "$as_me:1598: \$? = $ac_status" >&5
+   (exit $ac_status); }; }; then
+   ac_compiler_gnu=yes
+ else
+   echo "$as_me: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ ac_compiler_gnu=no
+ fi
+ rm -f conftest.$ac_objext conftest.$ac_ext
+ ac_cv_c_compiler_gnu=$ac_compiler_gnu
+ fi
+ echo "$as_me:1610: result: $ac_cv_c_compiler_gnu" >&5
+ echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
+ GCC=`test $ac_compiler_gnu = yes && echo yes`
+ ac_test_CFLAGS=${CFLAGS+set}
+ ac_save_CFLAGS=$CFLAGS
+ CFLAGS="-g"
+ echo "$as_me:1616: checking whether $CC accepts -g" >&5
+ echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
+ if test "${ac_cv_prog_cc_g+set}" = set; then
+   echo $ECHO_N "(cached) $ECHO_C" >&6
  else
-   echo 'void f(){}' > conftest.c
+   cat >conftest.$ac_ext <<_ACEOF
- if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
+ #line 1622 "configure"
+ #include "confdefs.h"
+ int
+ main ()
+ {
+   ;
+   return 0;
+ }
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:1634: \"$ac_compile\"") >&5
+   (eval $ac_compile) 2>&5
+   ac_status=$?
+   echo "$as_me:1637: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+          { ac_try='test -s conftest.$ac_objext'
+   { (eval echo "$as_me:1640: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+   echo "$as_me:1643: \$? = $ac_status" >&5
+   (exit $ac_status); }; }; then
    ac_cv_prog_cc_g=yes
  else
-   ac_cv_prog_cc_g=no
+   echo "$as_me: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ ac_cv_prog_cc_g=no
  fi
- rm -f conftest*
+ rm -f conftest.$ac_objext conftest.$ac_ext
  fi
+ echo "$as_me:1653: result: $ac_cv_prog_cc_g" >&5
- echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+ echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
  if test "$ac_test_CFLAGS" = set; then
-   CFLAGS="$ac_save_CFLAGS"
+   CFLAGS=$ac_save_CFLAGS
  elif test $ac_cv_prog_cc_g = yes; then
    if test "$GCC" = yes; then
      CFLAGS="-g -O2"
-Line 743 
 else
+Line 1666 
 else
      CFLAGS=
    fi
  fi
+ # Some people use a C++ compiler to compile C.  Since we use `exit',
+ # in C++ we need to declare it.  In case someone uses the same compiler
+ # for both compiling C and C++ we need to have the C++ compiler decide
+ # the declaration of exit, since it's the most demanding environment.
+ cat >conftest.$ac_ext <<_ACEOF
+ #ifndef __cplusplus
+   choke me
+ #endif
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:1680: \"$ac_compile\"") >&5
+   (eval $ac_compile) 2>&5
+   ac_status=$?
+   echo "$as_me:1683: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+          { ac_try='test -s conftest.$ac_objext'
+   { (eval echo "$as_me:1686: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+   echo "$as_me:1689: \$? = $ac_status" >&5
+   (exit $ac_status); }; }; then
+   for ac_declaration in \
+    ''\
+    '#include <stdlib.h>' \
+    'extern "C" void std::exit (int) throw (); using std::exit;' \
+    'extern "C" void std::exit (int); using std::exit;' \
+    'extern "C" void exit (int) throw ();' \
+    'extern "C" void exit (int);' \
+    'void exit (int);'
+ do
+   cat >conftest.$ac_ext <<_ACEOF
+ #line 1701 "configure"
+ #include "confdefs.h"
+ #include <stdlib.h>
+ $ac_declaration
+ int
+ main ()
+ {
+ exit (42);
+   ;
+   return 0;
+ }
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:1714: \"$ac_compile\"") >&5
+   (eval $ac_compile) 2>&5
+   ac_status=$?
+   echo "$as_me:1717: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+          { ac_try='test -s conftest.$ac_objext'
+   { (eval echo "$as_me:1720: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+   echo "$as_me:1723: \$? = $ac_status" >&5
+   (exit $ac_status); }; }; then
+   :
+ else
+   echo "$as_me: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ continue
+ fi
+ rm -f conftest.$ac_objext conftest.$ac_ext
+   cat >conftest.$ac_ext <<_ACEOF
+ #line 1733 "configure"
+ #include "confdefs.h"
+ $ac_declaration
+ int
+ main ()
+ {
+ exit (42);
+   ;
+   return 0;
+ }
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:1745: \"$ac_compile\"") >&5
+   (eval $ac_compile) 2>&5
+   ac_status=$?
+   echo "$as_me:1748: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+          { ac_try='test -s conftest.$ac_objext'
+   { (eval echo "$as_me:1751: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+   echo "$as_me:1754: \$? = $ac_status" >&5
+   (exit $ac_status); }; }; then
+   break
+ else
+   echo "$as_me: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ fi
+ rm -f conftest.$ac_objext conftest.$ac_ext
+ done
+ echo '#ifdef __cplusplus' >>confdefs.h
+ echo $ac_declaration      >>confdefs.h
+ echo '#endif'             >>confdefs.h
- # Extract the first word of "ranlib", so it can be a program name with args.
+ else
- set dummy ranlib; ac_word=$2
+   echo "$as_me: failed program was:" >&5
- echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+ cat conftest.$ac_ext >&5
- echo "configure:768: checking for $ac_word" >&5
+ fi
- if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ rm -f conftest.$ac_objext conftest.$ac_ext
-   echo $ac_n "(cached) $ac_c" 1>&6
+ ac_ext=c
+ ac_cpp='$CPP $CPPFLAGS'
+ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ ac_compiler_gnu=$ac_cv_c_compiler_gnu
+ ac_aux_dir=
+ for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+   if test -f $ac_dir/install-sh; then
+     ac_aux_dir=$ac_dir
+     ac_install_sh="$ac_aux_dir/install-sh -c"
+     break
+   elif test -f $ac_dir/install.sh; then
+     ac_aux_dir=$ac_dir
+     ac_install_sh="$ac_aux_dir/install.sh -c"
+     break
+   elif test -f $ac_dir/shtool; then
+     ac_aux_dir=$ac_dir
+     ac_install_sh="$ac_aux_dir/shtool install -c"
+     break
+   fi
+ done
+ if test -z "$ac_aux_dir"; then
+   { { echo "$as_me:1795: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
+ echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
+    { (exit 1); exit 1; }; }
+ fi
+ ac_config_guess="$SHELL $ac_aux_dir/config.guess"
+ ac_config_sub="$SHELL $ac_aux_dir/config.sub"
+ ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+ # Find a good install program.  We prefer a C program (faster),
+ # so one script is as good as another.  But avoid the broken or
+ # incompatible versions:
+ # SysV /etc/install, /usr/sbin/install
+ # SunOS /usr/etc/install
+ # IRIX /sbin/install
+ # AIX /bin/install
+ # AmigaOS /C/install, which installs bootblocks on floppy discs
+ # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+ # AFS /usr/afsws/bin/install, which mishandles nonexistent args
+ # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+ # ./install, which can be erroneously created by make from ./install.sh.
+ echo "$as_me:1815: checking for a BSD compatible install" >&5
+ echo $ECHO_N "checking for a BSD compatible install... $ECHO_C" >&6
+ if test -z "$INSTALL"; then
+ if test "${ac_cv_path_install+set}" = set; then
+   echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+     ac_save_IFS=$IFS; IFS=$ac_path_separator
+   for ac_dir in $PATH; do
+     IFS=$ac_save_IFS
+     # Account for people who put trailing slashes in PATH elements.
+     case $ac_dir/ in
+     / | ./ | .// | /cC/* \
+     | /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* \
+     | /usr/ucb/* ) ;;
+     *)
+       # OSF1 and SCO ODT 3.0 have their own names for install.
+       # Don't use installbsd from OSF since it installs stuff as root
+       # by default.
+       for ac_prog in ginstall scoinst install; do
+         if $as_executable_p "$ac_dir/$ac_prog"; then
+           if test $ac_prog = install &&
+             grep dspmsg "$ac_dir/$ac_prog" >/dev/null 2>&1; then
+             # AIX install.  It has an incompatible calling convention.
+             :
+           elif test $ac_prog = install &&
+             grep pwplus "$ac_dir/$ac_prog" >/dev/null 2>&1; then
+             # program-specific install script used by HP pwplus--don't use.
+             :
+           else
+             ac_cv_path_install="$ac_dir/$ac_prog -c"
+             break 2
+           fi
+         fi
+       done
+       ;;
+     esac
+   done
+ fi
+   if test "${ac_cv_path_install+set}" = set; then
+     INSTALL=$ac_cv_path_install
+   else
+     # As a last resort, use the slow shell script.  We don't cache a
+     # path for INSTALL within a source directory, because that will
+     # break other packages using the cache if that directory is
+     # removed, or if the path is relative.
+     INSTALL=$ac_install_sh
+   fi
+ fi
+ echo "$as_me:1864: result: $INSTALL" >&5
+ echo "${ECHO_T}$INSTALL" >&6
+ # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+ # It thinks the first close brace ends the variable substitution.
+ test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+ if test -n "$ac_tool_prefix"; then
+   # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+ echo "$as_me:1878: checking for $ac_word" >&5
+ echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+ if test "${ac_cv_prog_RANLIB+set}" = set; then
+   echo $ECHO_N "(cached) $ECHO_C" >&6
  else
    if test -n "$RANLIB"; then
    ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
  else
-   IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
+   ac_save_IFS=$IFS; IFS=$ac_path_separator
-   ac_dummy="$PATH"
+ ac_dummy="$PATH"
-   for ac_dir in $ac_dummy; do
+ for ac_dir in $ac_dummy; do
-     test -z "$ac_dir" && ac_dir=.
+   IFS=$ac_save_IFS
-     if test -f $ac_dir/$ac_word; then
+   test -z "$ac_dir" && ac_dir=.
-       ac_cv_prog_RANLIB="ranlib"
+   $as_executable_p "$ac_dir/$ac_word" || continue
-       break
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-     fi
+ echo "$as_me:1893: found $ac_dir/$ac_word" >&5
-   done
+ break
-   IFS="$ac_save_ifs"
+ done
-   test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
  fi
  fi
- RANLIB="$ac_cv_prog_RANLIB"
+ RANLIB=$ac_cv_prog_RANLIB
  if test -n "$RANLIB"; then
-   echo "$ac_t""$RANLIB" 1>&6
+   echo "$as_me:1901: result: $RANLIB" >&5
+ echo "${ECHO_T}$RANLIB" >&6
  else
-   echo "$ac_t""no" 1>&6
+   echo "$as_me:1904: result: no" >&5
+ echo "${ECHO_T}no" >&6
+ fi
  fi
+ if test -z "$ac_cv_prog_RANLIB"; then
+   ac_ct_RANLIB=$RANLIB
+   # Extract the first word of "ranlib", so it can be a program name with args.
+ set dummy ranlib; ac_word=$2
+ echo "$as_me:1913: checking for $ac_word" >&5
+ echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+ if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
+   echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+   if test -n "$ac_ct_RANLIB"; then
+   ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+ else
+   ac_save_IFS=$IFS; IFS=$ac_path_separator
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+   IFS=$ac_save_IFS
+   test -z "$ac_dir" && ac_dir=.
+   $as_executable_p "$ac_dir/$ac_word" || continue
+ ac_cv_prog_ac_ct_RANLIB="ranlib"
+ echo "$as_me:1928: found $ac_dir/$ac_word" >&5
+ break
+ done
+   test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
+ fi
+ fi
+ ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+ if test -n "$ac_ct_RANLIB"; then
+   echo "$as_me:1937: result: $ac_ct_RANLIB" >&5
+ echo "${ECHO_T}$ac_ct_RANLIB" >&6
+ else
+   echo "$as_me:1940: result: no" >&5
+ echo "${ECHO_T}no" >&6
+ fi
+   RANLIB=$ac_ct_RANLIB
+ else
+   RANLIB="$ac_cv_prog_RANLIB"
+ fi
- echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
+ ac_ext=c
- echo "configure:798: checking how to run the C preprocessor" >&5
+ ac_cpp='$CPP $CPPFLAGS'
+ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ ac_compiler_gnu=$ac_cv_c_compiler_gnu
+ echo "$as_me:1954: checking how to run the C preprocessor" >&5
+ echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
  # On Suns, sometimes $CPP names a directory.
  if test -n "$CPP" && test -d "$CPP"; then
    CPP=
  fi
  if test -z "$CPP"; then
- if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
+   if test "${ac_cv_prog_CPP+set}" = set; then
-   echo $ac_n "(cached) $ac_c" 1>&6
+   echo $ECHO_N "(cached) $ECHO_C" >&6
  else
-     # This must be in double quotes, not single quotes, because CPP may get
+       # Double quotes because CPP needs to be expanded
-   # substituted into the Makefile and "${CC-cc}" will confuse make.
+     for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
-   CPP="${CC-cc} -E"
+     do
+       # break 2 since there is a loop in there.
+       ac_preproc_ok=false
+ for ac_c_preproc_warn_flag in '' yes
+ do
+   # Use a header file that comes with gcc, so configuring glibc
+   # with a fresh cross-compiler works.
    # On the NeXT, cc -E runs the code through the compiler's parser,
-   # not just through cpp.
+   # not just through cpp. "Syntax error" is here to catch this case.
-   cat > conftest.$ac_ext <<EOF
+   cat >conftest.$ac_ext <<_ACEOF
- #line 813 "configure"
+ #line 1976 "configure"
  #include "confdefs.h"
  #include <assert.h>
- Syntax Error
+                      Syntax error
- EOF
+ _ACEOF
- ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+ if { (eval echo "$as_me:1981: \"$ac_cpp conftest.$ac_ext\"") >&5
- { (eval echo configure:819: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
- ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+   ac_status=$?
- if test -z "$ac_err"; then
+   egrep -v '^ *\+' conftest.er1 >conftest.err
+   rm -f conftest.er1
+   cat conftest.err >&5
+   echo "$as_me:1987: \$? = $ac_status" >&5
+   (exit $ac_status); } >/dev/null; then
+   if test -s conftest.err; then
+     ac_cpp_err=$ac_c_preproc_warn_flag
+   else
+     ac_cpp_err=
+   fi
+ else
+   ac_cpp_err=yes
+ fi
+ if test -z "$ac_cpp_err"; then
    :
  else
-   echo "$ac_err" >&5
+   echo "$as_me: failed program was:" >&5
-   echo "configure: failed program was:" >&5
    cat conftest.$ac_ext >&5
-   rm -rf conftest*
+   # Broken: fails on valid input.
-   CPP="${CC-cc} -E -traditional-cpp"
+ continue
-   cat > conftest.$ac_ext <<EOF
+ fi
- #line 830 "configure"
+ rm -f conftest.err conftest.$ac_ext
+   # OK, works on sane cases.  Now check whether non-existent headers
+   # can be detected and how.
+   cat >conftest.$ac_ext <<_ACEOF
+ #line 2010 "configure"
  #include "confdefs.h"
- #include <assert.h>
+ #include <ac_nonexistent.h>
- Syntax Error
+ _ACEOF
- EOF
+ if { (eval echo "$as_me:2014: \"$ac_cpp conftest.$ac_ext\"") >&5
- ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
- { (eval echo configure:836: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+   ac_status=$?
- ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+   egrep -v '^ *\+' conftest.er1 >conftest.err
- if test -z "$ac_err"; then
+   rm -f conftest.er1
-   :
+   cat conftest.err >&5
+   echo "$as_me:2020: \$? = $ac_status" >&5
+   (exit $ac_status); } >/dev/null; then
+   if test -s conftest.err; then
+     ac_cpp_err=$ac_c_preproc_warn_flag
+   else
+     ac_cpp_err=
+   fi
+ else
+   ac_cpp_err=yes
+ fi
+ if test -z "$ac_cpp_err"; then
+   # Broken: success on invalid input.
+ continue
  else
-   echo "$ac_err" >&5
+   echo "$as_me: failed program was:" >&5
-   echo "configure: failed program was:" >&5
    cat conftest.$ac_ext >&5
-   rm -rf conftest*
+   # Passes both tests.
-   CPP="${CC-cc} -nologo -E"
+ ac_preproc_ok=:
-   cat > conftest.$ac_ext <<EOF
+ break
- #line 847 "configure"
+ fi
+ rm -f conftest.err conftest.$ac_ext
+ done
+ # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+ rm -f conftest.err conftest.$ac_ext
+ if $ac_preproc_ok; then
+   break 2
+ fi
+     done
+     ac_cv_prog_CPP=$CPP
+ fi
+   CPP=$ac_cv_prog_CPP
+ else
+   ac_cv_prog_CPP=$CPP
+ fi
+ echo "$as_me:2057: result: $CPP" >&5
+ echo "${ECHO_T}$CPP" >&6
+ ac_preproc_ok=false
+ for ac_c_preproc_warn_flag in '' yes
+ do
+   # Use a header file that comes with gcc, so configuring glibc
+   # with a fresh cross-compiler works.
+   # On the NeXT, cc -E runs the code through the compiler's parser,
+   # not just through cpp. "Syntax error" is here to catch this case.
+   cat >conftest.$ac_ext <<_ACEOF
+ #line 2067 "configure"
  #include "confdefs.h"
  #include <assert.h>
- Syntax Error
+                      Syntax error
- EOF
+ _ACEOF
- ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+ if { (eval echo "$as_me:2072: \"$ac_cpp conftest.$ac_ext\"") >&5
- { (eval echo configure:853: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
- ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+   ac_status=$?
- if test -z "$ac_err"; then
+   egrep -v '^ *\+' conftest.er1 >conftest.err
+   rm -f conftest.er1
+   cat conftest.err >&5
+   echo "$as_me:2078: \$? = $ac_status" >&5
+   (exit $ac_status); } >/dev/null; then
+   if test -s conftest.err; then
+     ac_cpp_err=$ac_c_preproc_warn_flag
+   else
+     ac_cpp_err=
+   fi
+ else
+   ac_cpp_err=yes
+ fi
+ if test -z "$ac_cpp_err"; then
    :
  else
-   echo "$ac_err" >&5
+   echo "$as_me: failed program was:" >&5
-   echo "configure: failed program was:" >&5
    cat conftest.$ac_ext >&5
-   rm -rf conftest*
+   # Broken: fails on valid input.
-   CPP=/lib/cpp
+ continue
- fi
- rm -f conftest*
  fi
- rm -f conftest*
+ rm -f conftest.err conftest.$ac_ext
+   # OK, works on sane cases.  Now check whether non-existent headers
+   # can be detected and how.
+   cat >conftest.$ac_ext <<_ACEOF
+ #line 2101 "configure"
+ #include "confdefs.h"
+ #include <ac_nonexistent.h>
+ _ACEOF
+ if { (eval echo "$as_me:2105: \"$ac_cpp conftest.$ac_ext\"") >&5
+   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+   ac_status=$?
+   egrep -v '^ *\+' conftest.er1 >conftest.err
+   rm -f conftest.er1
+   cat conftest.err >&5
+   echo "$as_me:2111: \$? = $ac_status" >&5
+   (exit $ac_status); } >/dev/null; then
+   if test -s conftest.err; then
+     ac_cpp_err=$ac_c_preproc_warn_flag
+   else
+     ac_cpp_err=
+   fi
+ else
+   ac_cpp_err=yes
  fi
- rm -f conftest*
+ if test -z "$ac_cpp_err"; then
-   ac_cv_prog_CPP="$CPP"
+   # Broken: success on invalid input.
+ continue
+ else
+   echo "$as_me: failed program was:" >&5
+   cat conftest.$ac_ext >&5
+   # Passes both tests.
+ ac_preproc_ok=:
+ break
  fi
-   CPP="$ac_cv_prog_CPP"
+ rm -f conftest.err conftest.$ac_ext
+ done
+ # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+ rm -f conftest.err conftest.$ac_ext
+ if $ac_preproc_ok; then
+   :
  else
-   ac_cv_prog_CPP="$CPP"
+   { { echo "$as_me:2139: error: C preprocessor \"$CPP\" fails sanity check" >&5
+ echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check" >&2;}
+    { (exit 1); exit 1; }; }
  fi
- echo "$ac_t""$CPP" 1>&6
- echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
+ ac_ext=c
- echo "configure:878: checking for ANSI C header files" >&5
+ ac_cpp='$CPP $CPPFLAGS'
- if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
+ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-   echo $ac_n "(cached) $ac_c" 1>&6
+ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ ac_compiler_gnu=$ac_cv_c_compiler_gnu
+ echo "$as_me:2150: checking for ANSI C header files" >&5
+ echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
+ if test "${ac_cv_header_stdc+set}" = set; then
+   echo $ECHO_N "(cached) $ECHO_C" >&6
  else
-   cat > conftest.$ac_ext <<EOF
+   cat >conftest.$ac_ext <<_ACEOF
- #line 883 "configure"
+ #line 2156 "configure"
  #include "confdefs.h"
  #include <stdlib.h>
  #include <stdarg.h>
  #include <string.h>
  #include <float.h>
- EOF
- ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+ _ACEOF
- { (eval echo configure:891: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ if { (eval echo "$as_me:2164: \"$ac_cpp conftest.$ac_ext\"") >&5
- ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
- if test -z "$ac_err"; then
+   ac_status=$?
-   rm -rf conftest*
+   egrep -v '^ *\+' conftest.er1 >conftest.err
+   rm -f conftest.er1
+   cat conftest.err >&5
+   echo "$as_me:2170: \$? = $ac_status" >&5
+   (exit $ac_status); } >/dev/null; then
+   if test -s conftest.err; then
+     ac_cpp_err=$ac_c_preproc_warn_flag
+   else
+     ac_cpp_err=
+   fi
+ else
+   ac_cpp_err=yes
+ fi
+ if test -z "$ac_cpp_err"; then
    ac_cv_header_stdc=yes
  else
-   echo "$ac_err" >&5
+   echo "$as_me: failed program was:" >&5
-   echo "configure: failed program was:" >&5
    cat conftest.$ac_ext >&5
-   rm -rf conftest*
    ac_cv_header_stdc=no
  fi
- rm -f conftest*
+ rm -f conftest.err conftest.$ac_ext
  if test $ac_cv_header_stdc = yes; then
    # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
- cat > conftest.$ac_ext <<EOF
+   cat >conftest.$ac_ext <<_ACEOF
- #line 908 "configure"
+ #line 2192 "configure"
  #include "confdefs.h"
  #include <string.h>
- EOF
+ _ACEOF
  if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
    egrep "memchr" >/dev/null 2>&1; then
    :
  else
-   rm -rf conftest*
    ac_cv_header_stdc=no
  fi
  rm -f conftest*
-Line 904 
 fi
+Line 2205 
 fi
  if test $ac_cv_header_stdc = yes; then
    # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
- cat > conftest.$ac_ext <<EOF
+   cat >conftest.$ac_ext <<_ACEOF
- #line 926 "configure"
+ #line 2210 "configure"
  #include "confdefs.h"
  #include <stdlib.h>
- EOF
+ _ACEOF
  if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
    egrep "free" >/dev/null 2>&1; then
    :
  else
-   rm -rf conftest*
    ac_cv_header_stdc=no
  fi
  rm -f conftest*
-Line 922 
 fi
+Line 2223 
 fi
  if test $ac_cv_header_stdc = yes; then
    # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
- if test "$cross_compiling" = yes; then
+   if test "$cross_compiling" = yes; then
    :
  else
-   cat > conftest.$ac_ext <<EOF
+   cat >conftest.$ac_ext <<_ACEOF
- #line 947 "configure"
+ #line 2231 "configure"
  #include "confdefs.h"
  #include <ctype.h>
- #define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+ #if ((' ' & 0x0FF) == 0x020)
- #define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+ # define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
- #define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+ # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
- int main () { int i; for (i = 0; i < 256; i++)
+ #else
- if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
+ # define ISLOWER(c) (('a' <= (c) && (c) <= 'i') \
- exit (0); }
+                      || ('j' <= (c) && (c) <= 'r') \
+                      || ('s' <= (c) && (c) <= 'z'))
+ # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+ #endif
- EOF
+ #define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
- if { (eval echo configure:958: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+ int
- then
+ main ()
+ {
+   int i;
+   for (i = 0; i < 256; i++)
+     if (XOR (islower (i), ISLOWER (i))
+         || toupper (i) != TOUPPER (i))
+       exit(2);
+   exit (0);
+ }
+ _ACEOF
+ rm -f conftest$ac_exeext
+ if { (eval echo "$as_me:2257: \"$ac_link\"") >&5
+   (eval $ac_link) 2>&5
+   ac_status=$?
+   echo "$as_me:2260: \$? = $ac_status" >&5
+   (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+   { (eval echo "$as_me:2262: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+   echo "$as_me:2265: \$? = $ac_status" >&5
+   (exit $ac_status); }; }; then
    :
  else
-   echo "configure: failed program was:" >&5
+   echo "$as_me: program exited with status $ac_status" >&5
-   cat conftest.$ac_ext >&5
+ echo "$as_me: failed program was:" >&5
-   rm -fr conftest*
+ cat conftest.$ac_ext >&5
-   ac_cv_header_stdc=no
+ ac_cv_header_stdc=no
  fi
- rm -fr conftest*
+ rm -f core core.* *.core conftest$ac_exeext conftest.$ac_ext
  fi
  fi
  fi
+ echo "$as_me:2278: result: $ac_cv_header_stdc" >&5
- echo "$ac_t""$ac_cv_header_stdc" 1>&6
+ echo "${ECHO_T}$ac_cv_header_stdc" >&6
  if test $ac_cv_header_stdc = yes; then
-   cat >> confdefs.h <<\EOF
+ cat >>confdefs.h <<\EOF
  #define STDC_HEADERS 1
  EOF
  fi
- for ac_hdr in limits.h
+ for ac_header in limits.h
  do
- ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+ ac_ac_Header=`echo "ac_cv_header_$ac_header" | $ac_tr_sh`
- echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+ echo "$as_me:2291: checking for $ac_header" >&5
- echo "configure:985: checking for $ac_hdr" >&5
+ echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
- if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ if eval "test \"\${$ac_ac_Header+set}\" = set"; then
-   echo $ac_n "(cached) $ac_c" 1>&6
+   echo $ECHO_N "(cached) $ECHO_C" >&6
  else
-   cat > conftest.$ac_ext <<EOF
+   cat >conftest.$ac_ext <<_ACEOF
- #line 990 "configure"
+ #line 2297 "configure"
  #include "confdefs.h"
- #include <$ac_hdr>
+ #include <$ac_header>
- EOF
+ _ACEOF
- ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+ if { (eval echo "$as_me:2301: \"$ac_cpp conftest.$ac_ext\"") >&5
- { (eval echo configure:995: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
- ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+   ac_status=$?
- if test -z "$ac_err"; then
+   egrep -v '^ *\+' conftest.er1 >conftest.err
-   rm -rf conftest*
+   rm -f conftest.er1
-   eval "ac_cv_header_$ac_safe=yes"
+   cat conftest.err >&5
+   echo "$as_me:2307: \$? = $ac_status" >&5
+   (exit $ac_status); } >/dev/null; then
+   if test -s conftest.err; then
+     ac_cpp_err=$ac_c_preproc_warn_flag
+   else
+     ac_cpp_err=
+   fi
  else
-   echo "$ac_err" >&5
+   ac_cpp_err=yes
-   echo "configure: failed program was:" >&5
+ fi
+ if test -z "$ac_cpp_err"; then
+   eval "$ac_ac_Header=yes"
+ else
+   echo "$as_me: failed program was:" >&5
    cat conftest.$ac_ext >&5
-   rm -rf conftest*
+   eval "$ac_ac_Header=no"
-   eval "ac_cv_header_$ac_safe=no"
  fi
- rm -f conftest*
+ rm -f conftest.err conftest.$ac_ext
  fi
- if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$as_me:2326: result: `eval echo '${'$ac_ac_Header'}'`" >&5
-   echo "$ac_t""yes" 1>&6
+ echo "${ECHO_T}`eval echo '${'$ac_ac_Header'}'`" >&6
-     ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ if test `eval echo '${'$ac_ac_Header'}'` = yes; then
-   cat >> confdefs.h <<EOF
+   cat >>confdefs.h <<EOF
- #define $ac_tr_hdr 1
+ #define `echo "HAVE_$ac_header" | $ac_tr_cpp` 1
  EOF
- else
-   echo "$ac_t""no" 1>&6
  fi
  done
+ echo "$as_me:2336: checking for $CC option to accept ANSI C" >&5
+ echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
+ if test "${ac_cv_prog_cc_stdc+set}" = set; then
+   echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+   ac_cv_prog_cc_stdc=no
+ ac_save_CC=$CC
+ cat >conftest.$ac_ext <<_ACEOF
+ #line 2344 "configure"
+ #include "confdefs.h"
+ #include <stdarg.h>
+ #include <stdio.h>
+ #include <sys/types.h>
+ #include <sys/stat.h>
+ /* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+ struct buf { int x; };
+ FILE * (*rcsopen) (struct buf *, struct stat *, int);
+ static char *e (p, i)
+      char **p;
+      int i;
+ {
+   return p[i];
+ }
+ static char *f (char * (*g) (char **, int), char **p, ...)
+ {
+   char *s;
+   va_list v;
+   va_start (v,p);
+   s = g (p, va_arg (v,int));
+   va_end (v);
+   return s;
+ }
+ int test (int i, double x);
+ struct s1 {int (*f) (int a);};
+ struct s2 {int (*f) (double a);};
+ int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+ int argc;
+ char **argv;
+ int
+ main ()
+ {
+ return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+   ;
+   return 0;
+ }
+ _ACEOF
+ # Don't try gcc -ansi; that turns off useful extensions and
+ # breaks some systems' header files.
+ # AIX                   -qlanglvl=ansi
+ # Ultrix and OSF/1      -std1
+ # HP-UX 10.20 and later -Ae
+ # HP-UX older versions  -Aa -D_HPUX_SOURCE
+ # SVR4                  -Xc -D__EXTENSIONS__
+ for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+ do
+   CC="$ac_save_CC $ac_arg"
+   rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:2393: \"$ac_compile\"") >&5
+   (eval $ac_compile) 2>&5
+   ac_status=$?
+   echo "$as_me:2396: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+          { ac_try='test -s conftest.$ac_objext'
+   { (eval echo "$as_me:2399: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+   echo "$as_me:2402: \$? = $ac_status" >&5
+   (exit $ac_status); }; }; then
+   ac_cv_prog_cc_stdc=$ac_arg
+ break
+ else
+   echo "$as_me: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ fi
+ rm -f conftest.$ac_objext
+ done
+ rm -f conftest.$ac_ext conftest.$ac_objext
+ CC=$ac_save_CC
+ fi
- echo $ac_n "checking for working const""... $ac_c" 1>&6
+ case "x$ac_cv_prog_cc_stdc" in
- echo "configure:1024: checking for working const" >&5
+   x|xno)
- if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
+     echo "$as_me:2419: result: none needed" >&5
-   echo $ac_n "(cached) $ac_c" 1>&6
+ echo "${ECHO_T}none needed" >&6 ;;
+   *)
+     echo "$as_me:2422: result: $ac_cv_prog_cc_stdc" >&5
+ echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
+     CC="$CC $ac_cv_prog_cc_stdc" ;;
+ esac
+ echo "$as_me:2427: checking for an ANSI C-conforming const" >&5
+ echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6
+ if test "${ac_cv_c_const+set}" = set; then
+   echo $ECHO_N "(cached) $ECHO_C" >&6
  else
-   cat > conftest.$ac_ext <<EOF
+   cat >conftest.$ac_ext <<_ACEOF
- #line 1029 "configure"
+ #line 2433 "configure"
  #include "confdefs.h"
- int main() {
+ int
+ main ()
+ {
+ /* FIXME: Include the comments suggested by Paul. */
+ #ifndef __cplusplus
+   /* Ultrix mips cc rejects this.  */
+   typedef int charset[2];
+   const charset x;
+   /* SunOS 4.1.1 cc rejects this.  */
+   char const *const *ccp;
+   char **p;
+   /* NEC SVR4.0.2 mips cc rejects this.  */
+   struct point {int x, y;};
+   static struct point const zero = {0,0};
+   /* AIX XL C 1.02.0.0 rejects this.
+      It does not let you subtract one const X* pointer from another in
+      an arm of an if-expression whose if-part is not a constant
+      expression */
+   const char *g = "string";
+   ccp = &g + (g ? g-g : 0);
+   /* HPUX 7.0 cc rejects these. */
+   ++ccp;
+   p = (char**) ccp;
+   ccp = (char const *const *) p;
+   { /* SCO 3.2v4 cc rejects this.  */
+     char *t;
+     char const *s = 0 ? (char *) 0 : (char const *) 0;
+     *t++ = 0;
+   }
+   { /* Someone thinks the Sun supposedly-ANSI compiler will reject this.  */
+     int x[] = {25, 17};
+     const int *foo = &x[0];
+     ++foo;
+   }
+   { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+     typedef const int *iptr;
+     iptr p = 0;
+     ++p;
+   }
+   { /* AIX XL C 1.02.0.0 rejects this saying
+        "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+     struct s { int j; const int *ap[3]; };
+     struct s *b; b->j = 5;
+   }
+   { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+     const int foo = 10;
+   }
+ #endif
- /* Ultrix mips cc rejects this.  */
+   ;
- typedef int charset[2]; const charset x;
+   return 0;
- /* SunOS 4.1.1 cc rejects this.  */
- char const *const *ccp;
- char **p;
- /* NEC SVR4.0.2 mips cc rejects this.  */
- struct point {int x, y;};
- static struct point const zero = {0,0};
- /* AIX XL C 1.02.0.0 rejects this.
-    It does not let you subtract one const X* pointer from another in an arm
-    of an if-expression whose if-part is not a constant expression */
- const char *g = "string";
- ccp = &g + (g ? g-g : 0);
- /* HPUX 7.0 cc rejects these. */
- ++ccp;
- p = (char**) ccp;
- ccp = (char const *const *) p;
- { /* SCO 3.2v4 cc rejects this.  */
-   char *t;
-   char const *s = 0 ? (char *) 0 : (char const *) 0;
-   *t++ = 0;
- }
- { /* Someone thinks the Sun supposedly-ANSI compiler will reject this.  */
-   int x[] = {25, 17};
-   const int *foo = &x[0];
-   ++foo;
- }
- { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
-   typedef const int *iptr;
-   iptr p = 0;
-   ++p;
- }
- { /* AIX XL C 1.02.0.0 rejects this saying
-      "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
-   struct s { int j; const int *ap[3]; };
-   struct s *b; b->j = 5;
  }
- { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+ _ACEOF
-   const int foo = 10;
+ rm -f conftest.$ac_objext
- }
+ if { (eval echo "$as_me:2491: \"$ac_compile\"") >&5
+   (eval $ac_compile) 2>&5
- ; return 0; }
+   ac_status=$?
- EOF
+   echo "$as_me:2494: \$? = $ac_status" >&5
- if { (eval echo configure:1078: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+   (exit $ac_status); } &&
-   rm -rf conftest*
+          { ac_try='test -s conftest.$ac_objext'
+   { (eval echo "$as_me:2497: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+   echo "$as_me:2500: \$? = $ac_status" >&5
+   (exit $ac_status); }; }; then
    ac_cv_c_const=yes
  else
-   echo "configure: failed program was:" >&5
+   echo "$as_me: failed program was:" >&5
-   cat conftest.$ac_ext >&5
+ cat conftest.$ac_ext >&5
-   rm -rf conftest*
+ ac_cv_c_const=no
-   ac_cv_c_const=no
  fi
- rm -f conftest*
+ rm -f conftest.$ac_objext conftest.$ac_ext
  fi
+ echo "$as_me:2510: result: $ac_cv_c_const" >&5
- echo "$ac_t""$ac_cv_c_const" 1>&6
+ echo "${ECHO_T}$ac_cv_c_const" >&6
  if test $ac_cv_c_const = no; then
-   cat >> confdefs.h <<\EOF
- #define const
+ cat >>confdefs.h <<\EOF
+ #define const
  EOF
  fi
- echo $ac_n "checking for size_t""... $ac_c" 1>&6
+ for ac_header in stdlib.h string.h memory.h strings.h inttypes.h unistd.h
- echo "configure:1099: checking for size_t" >&5
+ do
- if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
+ ac_ac_Header=`echo "ac_cv_header_$ac_header" | $ac_tr_sh`
-   echo $ac_n "(cached) $ac_c" 1>&6
+ echo "$as_me:2523: checking for $ac_header" >&5
+ echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+ if eval "test \"\${$ac_ac_Header+set}\" = set"; then
+   echo $ECHO_N "(cached) $ECHO_C" >&6
  else
-   cat > conftest.$ac_ext <<EOF
+   cat >conftest.$ac_ext <<_ACEOF
- #line 1104 "configure"
+ #line 2529 "configure"
  #include "confdefs.h"
- #include <sys/types.h>
+ #include <$ac_header>
- #if STDC_HEADERS
+ _ACEOF
- #include <stdlib.h>
+ if { (eval echo "$as_me:2533: \"$ac_cpp conftest.$ac_ext\"") >&5
- #include <stddef.h>
+   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
- #endif
+   ac_status=$?
- EOF
+   egrep -v '^ *\+' conftest.er1 >conftest.err
- if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+   rm -f conftest.er1
-   egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
+   cat conftest.err >&5
-   rm -rf conftest*
+   echo "$as_me:2539: \$? = $ac_status" >&5
-   ac_cv_type_size_t=yes
+   (exit $ac_status); } >/dev/null; then
+   if test -s conftest.err; then
+     ac_cpp_err=$ac_c_preproc_warn_flag
+   else
+     ac_cpp_err=
+   fi
  else
-   rm -rf conftest*
+   ac_cpp_err=yes
-   ac_cv_type_size_t=no
  fi
- rm -f conftest*
+ if test -z "$ac_cpp_err"; then
+   eval "$ac_ac_Header=yes"
+ else
+   echo "$as_me: failed program was:" >&5
+   cat conftest.$ac_ext >&5
+   eval "$ac_ac_Header=no"
  fi
- echo "$ac_t""$ac_cv_type_size_t" 1>&6
+ rm -f conftest.err conftest.$ac_ext
- if test $ac_cv_type_size_t = no; then
+ fi
-   cat >> confdefs.h <<\EOF
+ echo "$as_me:2558: result: `eval echo '${'$ac_ac_Header'}'`" >&5
- #define size_t unsigned
+ echo "${ECHO_T}`eval echo '${'$ac_ac_Header'}'`" >&6
+ if test `eval echo '${'$ac_ac_Header'}'` = yes; then
+   cat >>confdefs.h <<EOF
+ #define `echo "HAVE_$ac_header" | $ac_tr_cpp` 1
  EOF
  fi
+ done
+ echo "$as_me:2568: checking for size_t" >&5
+ echo $ECHO_N "checking for size_t... $ECHO_C" >&6
- for ac_func in bcopy memmove strerror
+ if test "${ac_cv_type_size_t+set}" = set; then
- do
+   echo $ECHO_N "(cached) $ECHO_C" >&6
- echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
- echo "configure:1136: checking for $ac_func" >&5
- if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
-   echo $ac_n "(cached) $ac_c" 1>&6
  else
-   cat > conftest.$ac_ext <<EOF
+   cat >conftest.$ac_ext <<_ACEOF
- #line 1141 "configure"
+ #line 2574 "configure"
  #include "confdefs.h"
- /* System header to define __stub macros and hopefully few prototypes,
+ $ac_includes_default
-     which can conflict with char $ac_func(); below.  */
+ int
- #include <assert.h>
+ main ()
+ {
+ if ((size_t *) 0)
+   return 0;
+ if (sizeof (size_t))
+   return 0;
+   ;
+   return 0;
+ }
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:2589: \"$ac_compile\"") >&5
+   (eval $ac_compile) 2>&5
+   ac_status=$?
+   echo "$as_me:2592: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+          { ac_try='test -s conftest.$ac_objext'
+   { (eval echo "$as_me:2595: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+   echo "$as_me:2598: \$? = $ac_status" >&5
+   (exit $ac_status); }; }; then
+   ac_cv_type_size_t=yes
+ else
+   echo "$as_me: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ ac_cv_type_size_t=no
+ fi
+ rm -f conftest.$ac_objext conftest.$ac_ext
+ fi
+ echo "$as_me:2608: result: $ac_cv_type_size_t" >&5
+ echo "${ECHO_T}$ac_cv_type_size_t" >&6
+ if test $ac_cv_type_size_t = yes; then
+   :
+ else
+ cat >>confdefs.h <<EOF
+ #define size_t unsigned
+ EOF
+ fi
+ for ac_func in bcopy memmove strerror
+ do
+ ac_ac_var=`echo "ac_cv_func_$ac_func" | $ac_tr_sh`
+ echo "$as_me:2623: checking for $ac_func" >&5
+ echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
+ if eval "test \"\${$ac_ac_var+set}\" = set"; then
+   echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+   cat >conftest.$ac_ext <<_ACEOF
+ #line 2629 "configure"
+ #include "confdefs.h"
+ /* System header to define __stub macros and hopefully few prototypes,
+     which can conflict with char $ac_func (); below.  */
+ #include <assert.h>
+ /* Override any gcc2 internal prototype to avoid an error.  */
+ #ifdef __cplusplus
+ extern "C"
+ #endif
+ /* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+ char $ac_func ();
+ char (*f) ();
+ int
+ main ()
+ {
+ /* The GNU C library defines this for functions which it implements
+     to always fail with ENOSYS.  Some functions are actually named
+     something starting with __ and the normal name is an alias.  */
+ #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+ choke me
+ #else
+ f = $ac_func;
+ #endif
+   ;
+   return 0;
+ }
+ _ACEOF
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { (eval echo "$as_me:2660: \"$ac_link\"") >&5
+   (eval $ac_link) 2>&5
+   ac_status=$?
+   echo "$as_me:2663: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+          { ac_try='test -s conftest$ac_exeext'
+   { (eval echo "$as_me:2666: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+   echo "$as_me:2669: \$? = $ac_status" >&5
+   (exit $ac_status); }; }; then
+   eval "$ac_ac_var=yes"
+ else
+   echo "$as_me: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ eval "$ac_ac_var=no"
+ fi
+ rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+ fi
+ echo "$as_me:2679: result: `eval echo '${'$ac_ac_var'}'`" >&5
+ echo "${ECHO_T}`eval echo '${'$ac_ac_var'}'`" >&6
+ if test `eval echo '${'$ac_ac_var'}'` = yes; then
+   cat >>confdefs.h <<EOF
+ #define `echo "HAVE_$ac_func" | $ac_tr_cpp` 1
+ EOF
+ fi
+ done
+ # Check whether --enable-utf8 or --disable-utf8 was given.
+ if test "${enable_utf8+set}" = set; then
+   enableval="$enable_utf8"
+   if test "$enableval" = "yes"; then
+   UTF8=-DSUPPORT_UTF8
+ fi
+ fi;
+ # Check whether --enable-newline-is-cr or --disable-newline-is-cr was given.
+ if test "${enable_newline_is_cr+set}" = set; then
+   enableval="$enable_newline_is_cr"
+   if test "$enableval" = "yes"; then
+   NEWLINE=-DNEWLINE=13
+ fi
+ fi;
+ # Check whether --enable-newline-is-lf or --disable-newline-is-lf was given.
+ if test "${enable_newline_is_lf+set}" = set; then
+   enableval="$enable_newline_is_lf"
+   if test "$enableval" = "yes"; then
+   NEWLINE=-DNEWLINE=10
+ fi
+ fi;
+ # Check whether --enable-shared or --disable-shared was given.
+ if test "${enable_shared+set}" = set; then
+   enableval="$enable_shared"
+   p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_shared=yes ;;
+ no) enable_shared=no ;;
+ *)
+   enable_shared=no
+   # Look at the argument we got.  We use all the common list separators.
+   IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+   for pkg in $enableval; do
+     if test "X$pkg" = "X$p"; then
+       enable_shared=yes
+     fi
+   done
+   IFS="$ac_save_ifs"
+   ;;
+ esac
+ else
+   enable_shared=yes
+ fi;
+ # Check whether --enable-static or --disable-static was given.
+ if test "${enable_static+set}" = set; then
+   enableval="$enable_static"
+   p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_static=yes ;;
+ no) enable_static=no ;;
+ *)
+   enable_static=no
+   # Look at the argument we got.  We use all the common list separators.
+   IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+   for pkg in $enableval; do
+     if test "X$pkg" = "X$p"; then
+       enable_static=yes
+     fi
+   done
+   IFS="$ac_save_ifs"
+   ;;
+ esac
+ else
+   enable_static=yes
+ fi;
+ # Check whether --enable-fast-install or --disable-fast-install was given.
+ if test "${enable_fast_install+set}" = set; then
+   enableval="$enable_fast_install"
+   p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_fast_install=yes ;;
+ no) enable_fast_install=no ;;
+ *)
+   enable_fast_install=no
+   # Look at the argument we got.  We use all the common list separators.
+   IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+   for pkg in $enableval; do
+     if test "X$pkg" = "X$p"; then
+       enable_fast_install=yes
+     fi
+   done
+   IFS="$ac_save_ifs"
+   ;;
+ esac
+ else
+   enable_fast_install=yes
+ fi;
+ # Make sure we can run config.sub.
+ $ac_config_sub sun4 >/dev/null 2>&1 ||
+   { { echo "$as_me:2784: error: cannot run $ac_config_sub" >&5
+ echo "$as_me: error: cannot run $ac_config_sub" >&2;}
+    { (exit 1); exit 1; }; }
+ echo "$as_me:2788: checking build system type" >&5
+ echo $ECHO_N "checking build system type... $ECHO_C" >&6
+ if test "${ac_cv_build+set}" = set; then
+   echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+   ac_cv_build_alias=$build_alias
+ test -z "$ac_cv_build_alias" &&
+   ac_cv_build_alias=`$ac_config_guess`
+ test -z "$ac_cv_build_alias" &&
+   { { echo "$as_me:2797: error: cannot guess build type; you must specify one" >&5
+ echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
+    { (exit 1); exit 1; }; }
+ ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
+   { { echo "$as_me:2801: error: $ac_config_sub $ac_cv_build_alias failed." >&5
+ echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed." >&2;}
+    { (exit 1); exit 1; }; }
+ fi
+ echo "$as_me:2806: result: $ac_cv_build" >&5
+ echo "${ECHO_T}$ac_cv_build" >&6
+ build=$ac_cv_build
+ build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+ build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+ build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+ echo "$as_me:2813: checking host system type" >&5
+ echo $ECHO_N "checking host system type... $ECHO_C" >&6
+ if test "${ac_cv_host+set}" = set; then
+   echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+   ac_cv_host_alias=$host_alias
+ test -z "$ac_cv_host_alias" &&
+   ac_cv_host_alias=$ac_cv_build_alias
+ ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
+   { { echo "$as_me:2822: error: $ac_config_sub $ac_cv_host_alias failed" >&5
+ echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
+    { (exit 1); exit 1; }; }
+ fi
+ echo "$as_me:2827: result: $ac_cv_host" >&5
+ echo "${ECHO_T}$ac_cv_host" >&6
+ host=$ac_cv_host
+ host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+ host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+ host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+ # Check whether --with-gnu-ld or --without-gnu-ld was given.
+ if test "${with_gnu_ld+set}" = set; then
+   withval="$with_gnu_ld"
+   test "$withval" = no || with_gnu_ld=yes
+ else
+   with_gnu_ld=no
+ fi;
+ ac_prog=ld
+ if test "$GCC" = yes; then
+   # Check if gcc -print-prog-name=ld gives a path.
+   echo "$as_me:2844: checking for ld used by GCC" >&5
+ echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6
+   case $host in
+   *-*-mingw*)
+     # gcc leaves a trailing carriage return which upsets mingw
+     ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+   *)
+     ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+   esac
+   case $ac_prog in
+     # Accept absolute paths.
+     [\\/]* | [A-Za-z]:[\\/]*)
+       re_direlt='/[^/][^/]*/\.\./'
+       # Canonicalize the path of ld
+       ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+       while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+         ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+       done
+       test -z "$LD" && LD="$ac_prog"
+       ;;
+   "")
+     # If it fails, then pretend we aren't using GCC.
+     ac_prog=ld
+     ;;
+   *)
+     # If it is relative, then search for the first ld in PATH.
+     with_gnu_ld=unknown
+     ;;
+   esac
+ elif test "$with_gnu_ld" = yes; then
+   echo "$as_me:2874: checking for GNU ld" >&5
+ echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6
+ else
+   echo "$as_me:2877: checking for non-GNU ld" >&5
+ echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
+ fi
+ if test "${lt_cv_path_LD+set}" = set; then
+   echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+   if test -z "$LD"; then
+   IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+   for ac_dir in $PATH; do
+     test -z "$ac_dir" && ac_dir=.
+     if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+       lt_cv_path_LD="$ac_dir/$ac_prog"
+       # Check to see if the program is GNU ld.  I'd rather use --version,
+       # but apparently some GNU ld's only accept -v.
+       # Break only if it was the GNU/non-GNU ld that we prefer.
+       if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+         test "$with_gnu_ld" != no && break
+       else
+         test "$with_gnu_ld" != yes && break
+       fi
+     fi
+   done
+   IFS="$ac_save_ifs"
+ else
+   lt_cv_path_LD="$LD" # Let the user override the test with a path.
+ fi
+ fi
+ LD="$lt_cv_path_LD"
+ if test -n "$LD"; then
+   echo "$as_me:2907: result: $LD" >&5
+ echo "${ECHO_T}$LD" >&6
+ else
+   echo "$as_me:2910: result: no" >&5
+ echo "${ECHO_T}no" >&6
+ fi
+ test -z "$LD" && { { echo "$as_me:2913: error: no acceptable ld found in \$PATH" >&5
+ echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
+    { (exit 1); exit 1; }; }
+ echo "$as_me:2916: checking if the linker ($LD) is GNU ld" >&5
+ echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
+ if test "${lt_cv_prog_gnu_ld+set}" = set; then
+   echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+   # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+ if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+   lt_cv_prog_gnu_ld=yes
+ else
+   lt_cv_prog_gnu_ld=no
+ fi
+ fi
+ echo "$as_me:2928: result: $lt_cv_prog_gnu_ld" >&5
+ echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6
+ with_gnu_ld=$lt_cv_prog_gnu_ld
+ echo "$as_me:2932: checking for $LD option to reload object files" >&5
+ echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6
+ if test "${lt_cv_ld_reload_flag+set}" = set; then
+   echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+   lt_cv_ld_reload_flag='-r'
+ fi
+ echo "$as_me:2939: result: $lt_cv_ld_reload_flag" >&5
+ echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6
+ reload_flag=$lt_cv_ld_reload_flag
+ test -n "$reload_flag" && reload_flag=" $reload_flag"
+ echo "$as_me:2944: checking for BSD-compatible nm" >&5
+ echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6
+ if test "${lt_cv_path_NM+set}" = set; then
+   echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+   if test -n "$NM"; then
+   # Let the user override the test.
+   lt_cv_path_NM="$NM"
+ else
+   IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+   for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+     test -z "$ac_dir" && ac_dir=.
+     tmp_nm=$ac_dir/${ac_tool_prefix}nm
+     if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
+       # Check to see if the nm accepts a BSD-compat flag.
+       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+       #   nm: unknown option "B" ignored
+       # Tru64's nm complains that /dev/null is an invalid object file
+       if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
+         lt_cv_path_NM="$tmp_nm -B"
+         break
+       elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+         lt_cv_path_NM="$tmp_nm -p"
+         break
+       else
+         lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+         continue # so that we can try to find one that supports BSD flags
+       fi
+     fi
+   done
+   IFS="$ac_save_ifs"
+   test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+ fi
+ fi
+ NM="$lt_cv_path_NM"
+ echo "$as_me:2980: result: $NM" >&5
+ echo "${ECHO_T}$NM" >&6
+ echo "$as_me:2983: checking whether ln -s works" >&5
+ echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
+ LN_S=$as_ln_s
+ if test "$LN_S" = "ln -s"; then
+   echo "$as_me:2987: result: yes" >&5
+ echo "${ECHO_T}yes" >&6
+ else
+   echo "$as_me:2990: result: no, using $LN_S" >&5
+ echo "${ECHO_T}no, using $LN_S" >&6
+ fi
+ echo "$as_me:2994: checking how to recognise dependant libraries" >&5
+ echo $ECHO_N "checking how to recognise dependant libraries... $ECHO_C" >&6
+ if test "${lt_cv_deplibs_check_method+set}" = set; then
+   echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+   lt_cv_file_magic_cmd='$MAGIC_CMD'
+ lt_cv_file_magic_test_file=
+ lt_cv_deplibs_check_method='unknown'
+ # Need to set the preceding variable on all platforms that support
+ # interlibrary dependencies.
+ # 'none' -- dependencies not supported.
+ # `unknown' -- same as none, but documents that we really don't know.
+ # 'pass_all' -- all dependencies passed with no checks.
+ # 'test_compile' -- check by making test program.
+ # ['file_magic [regex]'] -- check by looking for files in library path
+ # which responds to the $file_magic_cmd with a given egrep regex.
+ # If you have `file' or equivalent on your system and you're not sure
+ # whether `pass_all' will *always* work, you probably want this one.
+ case $host_os in
+ aix4* | aix5*)
+   lt_cv_deplibs_check_method=pass_all
+   ;;
+ beos*)
+   lt_cv_deplibs_check_method=pass_all
+   ;;
+ bsdi4*)
+   lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+   lt_cv_file_magic_cmd='/usr/bin/file -L'
+   lt_cv_file_magic_test_file=/shlib/libc.so
+   ;;
+ cygwin* | mingw* | pw32*)
+   lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+   lt_cv_file_magic_cmd='$OBJDUMP -f'
+   ;;
+ darwin* | rhapsody*)
+   lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
+   lt_cv_file_magic_cmd='/usr/bin/file -L'
+   case "$host_os" in
+   rhapsody* | darwin1.012)
+     lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1`
+     ;;
+   *) # Darwin 1.3 on
+     lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
+     ;;
+   esac
+   ;;
+ freebsd*)
+   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+     case $host_cpu in
+     i*86 )
+       # Not sure whether the presence of OpenBSD here was a mistake.
+       # Let's accept both of them until this is cleared up.
+       lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
+       lt_cv_file_magic_cmd=/usr/bin/file
+       lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+       ;;
+     esac
+   else
+     lt_cv_deplibs_check_method=pass_all
+   fi
+   ;;
+ gnu*)
+   lt_cv_deplibs_check_method=pass_all
+   ;;
+ hpux10.20*|hpux11*)
+   lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+   lt_cv_file_magic_cmd=/usr/bin/file
+   lt_cv_file_magic_test_file=/usr/lib/libc.sl
+   ;;
+ irix5* | irix6*)
+   case $host_os in
+   irix5*)
+     # this will be overridden with pass_all, but let us keep it just in case
+     lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+     ;;
+   *)
+     case $LD in
+     *-32|*"-32 ") libmagic=32-bit;;
+     *-n32|*"-n32 ") libmagic=N32;;
+     *-64|*"-64 ") libmagic=64-bit;;
+     *) libmagic=never-match;;
+     esac
+     # this will be overridden with pass_all, but let us keep it just in case
+     lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
+     ;;
+   esac
+   lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+   lt_cv_deplibs_check_method=pass_all
+   ;;
+ # This must be Linux ELF.
+ linux-gnu*)
+   case $host_cpu in
+   alpha* | i*86 | powerpc* | sparc* | ia64* )
+     lt_cv_deplibs_check_method=pass_all ;;
+   *)
+     # glibc up to 2.1.1 does not perform some relocations on ARM
+     lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
+   esac
+   lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+   ;;
+ netbsd*)
+   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+     lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
+   else
+     lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
+   fi
+   ;;
+ newos6*)
+   lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+   lt_cv_file_magic_cmd=/usr/bin/file
+   lt_cv_file_magic_test_file=/usr/lib/libnls.so
+   ;;
+ osf3* | osf4* | osf5*)
+   # this will be overridden with pass_all, but let us keep it just in case
+   lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
+   lt_cv_file_magic_test_file=/shlib/libc.so
+   lt_cv_deplibs_check_method=pass_all
+   ;;
+ sco3.2v5*)
+   lt_cv_deplibs_check_method=pass_all
+   ;;
+ solaris*)
+   lt_cv_deplibs_check_method=pass_all
+   lt_cv_file_magic_test_file=/lib/libc.so
+   ;;
+ sysv5uw[78]* | sysv4*uw2*)
+   lt_cv_deplibs_check_method=pass_all
+   ;;
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+   case $host_vendor in
+   motorola)
+     lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+     lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+     ;;
+   ncr)
+     lt_cv_deplibs_check_method=pass_all
+     ;;
+   sequent)
+     lt_cv_file_magic_cmd='/bin/file'
+     lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+     ;;
+   sni)
+     lt_cv_file_magic_cmd='/bin/file'
+     lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+     lt_cv_file_magic_test_file=/lib/libc.so
+     ;;
+   esac
+   ;;
+ esac
+ fi
+ echo "$as_me:3162: result: $lt_cv_deplibs_check_method" >&5
+ echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6
+ file_magic_cmd=$lt_cv_file_magic_cmd
+ deplibs_check_method=$lt_cv_deplibs_check_method
+ # Check for command to grab the raw symbol name followed by C symbol from nm.
+ echo "$as_me:3168: checking command to parse $NM output" >&5
+ echo $ECHO_N "checking command to parse $NM output... $ECHO_C" >&6
+ if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
+   echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ # These are sane defaults that work on at least a few old systems.
+ # [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+ # Character class describing NM global symbol codes.
+ symcode='[BCDEGRST]'
+ # Regexp to match symbols that can be accessed directly from C.
+ sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+ # Transform the above into a raw symbol and a C symbol.
+ symxfrm='\1 \2\3 \3'
+ # Transform an extracted symbol line into a proper C declaration
+ lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
+ # Define system-specific variables.
+ case $host_os in
+ aix*)
+   symcode='[BCDT]'
+   ;;
+ cygwin* | mingw* | pw32*)
+   symcode='[ABCDGISTW]'
+   ;;
+ hpux*) # Its linker distinguishes data from code symbols
+   lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+   ;;
+ irix*)
+   symcode='[BCDEGRST]'
+   ;;
+ solaris* | sysv5*)
+   symcode='[BDT]'
+   ;;
+ sysv4)
+   symcode='[DFNSTU]'
+   ;;
+ esac
+ # Handle CRLF in mingw tool chain
+ opt_cr=
+ case $host_os in
+ mingw*)
+   opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+   ;;
+ esac
+ # If we're using GNU nm, then use its standard symbol codes.
+ if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
+   symcode='[ABCDGISTW]'
+ fi
+ # Try without a prefix undercore, then with it.
+ for ac_symprfx in "" "_"; do
+   # Write the raw and C identifiers.
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[         ]\($symcode$symcode*\)[         ][      ]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
+   # Check to see that the pipe works correctly.
+   pipe_works=no
+   rm -f conftest*
+   cat > conftest.$ac_ext <<EOF
+ #ifdef __cplusplus
+ extern "C" {
+ #endif
+ char nm_test_var;
+ void nm_test_func(){}
+ #ifdef __cplusplus
+ }
+ #endif
+ int main(){nm_test_var='a';nm_test_func();return(0);}
+ EOF
+   if { (eval echo "$as_me:3245: \"$ac_compile\"") >&5
+   (eval $ac_compile) 2>&5
+   ac_status=$?
+   echo "$as_me:3248: \$? = $ac_status" >&5
+   (exit $ac_status); }; then
+     # Now try to grab the symbols.
+     nlist=conftest.nm
+     if { (eval echo "$as_me:3252: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
+   (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
+   ac_status=$?
+   echo "$as_me:3255: \$? = $ac_status" >&5
+   (exit $ac_status); } && test -s "$nlist"; then
+       # Try sorting and uniquifying the output.
+       if sort "$nlist" | uniq > "$nlist"T; then
+         mv -f "$nlist"T "$nlist"
+       else
+         rm -f "$nlist"T
+       fi
+       # Make sure that we snagged all the symbols we need.
+       if egrep ' nm_test_var$' "$nlist" >/dev/null; then
+         if egrep ' nm_test_func$' "$nlist" >/dev/null; then
+           cat <<EOF > conftest.$ac_ext
+ #ifdef __cplusplus
+ extern "C" {
+ #endif
+ EOF
+           # Now generate the symbol file.
+           eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext'
+           cat <<EOF >> conftest.$ac_ext
+ #if defined (__STDC__) && __STDC__
+ # define lt_ptr_t void *
+ #else
+ # define lt_ptr_t char *
+ # define const
+ #endif
+ /* The mapping between symbol names and symbols. */
+ const struct {
+   const char *name;
+   lt_ptr_t address;
+ }
+ lt_preloaded_symbols[] =
+ {
+ EOF
+           sed "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" >> conftest.$ac_ext
+           cat <<\EOF >> conftest.$ac_ext
+   {0, (lt_ptr_t) 0}
+ };
+ #ifdef __cplusplus
+ }
+ #endif
+ EOF
+           # Now try linking the two files.
+           mv conftest.$ac_objext conftstm.$ac_objext
+           save_LIBS="$LIBS"
+           save_CFLAGS="$CFLAGS"
+           LIBS="conftstm.$ac_objext"
+           CFLAGS="$CFLAGS$no_builtin_flag"
+           if { (eval echo "$as_me:3307: \"$ac_link\"") >&5
+   (eval $ac_link) 2>&5
+   ac_status=$?
+   echo "$as_me:3310: \$? = $ac_status" >&5
+   (exit $ac_status); } && test -s conftest; then
+             pipe_works=yes
+           fi
+           LIBS="$save_LIBS"
+           CFLAGS="$save_CFLAGS"
+         else
+           echo "cannot find nm_test_func in $nlist" >&5
+         fi
+       else
+         echo "cannot find nm_test_var in $nlist" >&5
+       fi
+     else
+       echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+     fi
+   else
+     echo "$progname: failed program was:" >&5
+     cat conftest.$ac_ext >&5
+   fi
+   rm -f conftest* conftst*
+   # Do not use the global_symbol_pipe unless it works.
+   if test "$pipe_works" = yes; then
+     break
+   else
+     lt_cv_sys_global_symbol_pipe=
+   fi
+ done
+ fi
+ global_symbol_pipe="$lt_cv_sys_global_symbol_pipe"
+ if test -z "$lt_cv_sys_global_symbol_pipe"; then
+   global_symbol_to_cdecl=
+ else
+   global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl"
+ fi
+ if test -z "$global_symbol_pipe$global_symbol_to_cdecl"; then
+   echo "$as_me:3348: result: failed" >&5
+ echo "${ECHO_T}failed" >&6
+ else
+   echo "$as_me:3351: result: ok" >&5
+ echo "${ECHO_T}ok" >&6
+ fi
+ for ac_header in dlfcn.h
+ do
+ ac_ac_Header=`echo "ac_cv_header_$ac_header" | $ac_tr_sh`
+ echo "$as_me:3358: checking for $ac_header" >&5
+ echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+ if eval "test \"\${$ac_ac_Header+set}\" = set"; then
+   echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+   cat >conftest.$ac_ext <<_ACEOF
+ #line 3364 "configure"
+ #include "confdefs.h"
+ #include <$ac_header>
+ _ACEOF
+ if { (eval echo "$as_me:3368: \"$ac_cpp conftest.$ac_ext\"") >&5
+   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+   ac_status=$?
+   egrep -v '^ *\+' conftest.er1 >conftest.err
+   rm -f conftest.er1
+   cat conftest.err >&5
+   echo "$as_me:3374: \$? = $ac_status" >&5
+   (exit $ac_status); } >/dev/null; then
+   if test -s conftest.err; then
+     ac_cpp_err=$ac_c_preproc_warn_flag
+   else
+     ac_cpp_err=
+   fi
+ else
+   ac_cpp_err=yes
+ fi
+ if test -z "$ac_cpp_err"; then
+   eval "$ac_ac_Header=yes"
+ else
+   echo "$as_me: failed program was:" >&5
+   cat conftest.$ac_ext >&5
+   eval "$ac_ac_Header=no"
+ fi
+ rm -f conftest.err conftest.$ac_ext
+ fi
+ echo "$as_me:3393: result: `eval echo '${'$ac_ac_Header'}'`" >&5
+ echo "${ECHO_T}`eval echo '${'$ac_ac_Header'}'`" >&6
+ if test `eval echo '${'$ac_ac_Header'}'` = yes; then
+   cat >>confdefs.h <<EOF
+ #define `echo "HAVE_$ac_header" | $ac_tr_cpp` 1
+ EOF
+ fi
+ done
+ # Only perform the check for file, if the check method requires it
+ case $deplibs_check_method in
+ file_magic*)
+   if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+     echo "$as_me:3407: checking for ${ac_tool_prefix}file" >&5
+ echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6
+ if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
+   echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+   case $MAGIC_CMD in
+   /*)
+   lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+   ;;
+   ?:/*)
+   lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+   ;;
+   *)
+   ac_save_MAGIC_CMD="$MAGIC_CMD"
+   IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
+   ac_dummy="/usr/bin:$PATH"
+   for ac_dir in $ac_dummy; do
+     test -z "$ac_dir" && ac_dir=.
+     if test -f $ac_dir/${ac_tool_prefix}file; then
+       lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+       if test -n "$file_magic_test_file"; then
+         case $deplibs_check_method in
+         "file_magic "*)
+           file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+           MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+           if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+             egrep "$file_magic_regex" > /dev/null; then
+             :
+           else
+             cat <<EOF 1>&2
+ *** Warning: the command libtool uses to detect shared libraries,
+ *** $file_magic_cmd, produces output that libtool cannot recognize.
+ *** The result is that libtool may fail to recognize shared libraries
+ *** as such.  This will affect the creation of libtool libraries that
+ *** depend on shared libraries, but programs linked with such libtool
+ *** libraries will work regardless of this problem.  Nevertheless, you
+ *** may want to report the problem to your system manager and/or to
+ *** bug-libtool@gnu.org
+ EOF
+           fi ;;
+         esac
+       fi
+       break
+     fi
+   done
+   IFS="$ac_save_ifs"
+   MAGIC_CMD="$ac_save_MAGIC_CMD"
+   ;;
+ esac
+ fi
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if test -n "$MAGIC_CMD"; then
+   echo "$as_me:3462: result: $MAGIC_CMD" >&5
+ echo "${ECHO_T}$MAGIC_CMD" >&6
+ else
+   echo "$as_me:3465: result: no" >&5
+ echo "${ECHO_T}no" >&6
+ fi
+ if test -z "$lt_cv_path_MAGIC_CMD"; then
+   if test -n "$ac_tool_prefix"; then
+     echo "$as_me:3471: checking for file" >&5
+ echo $ECHO_N "checking for file... $ECHO_C" >&6
+ if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
+   echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+   case $MAGIC_CMD in
+   /*)
+   lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+   ;;
+   ?:/*)
+   lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+   ;;
+   *)
+   ac_save_MAGIC_CMD="$MAGIC_CMD"
+   IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
+   ac_dummy="/usr/bin:$PATH"
+   for ac_dir in $ac_dummy; do
+     test -z "$ac_dir" && ac_dir=.
+     if test -f $ac_dir/file; then
+       lt_cv_path_MAGIC_CMD="$ac_dir/file"
+       if test -n "$file_magic_test_file"; then
+         case $deplibs_check_method in
+         "file_magic "*)
+           file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+           MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+           if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+             egrep "$file_magic_regex" > /dev/null; then
+             :
+           else
+             cat <<EOF 1>&2
+ *** Warning: the command libtool uses to detect shared libraries,
+ *** $file_magic_cmd, produces output that libtool cannot recognize.
+ *** The result is that libtool may fail to recognize shared libraries
+ *** as such.  This will affect the creation of libtool libraries that
+ *** depend on shared libraries, but programs linked with such libtool
+ *** libraries will work regardless of this problem.  Nevertheless, you
+ *** may want to report the problem to your system manager and/or to
+ *** bug-libtool@gnu.org
+ EOF
+           fi ;;
+         esac
+       fi
+       break
+     fi
+   done
+   IFS="$ac_save_ifs"
+   MAGIC_CMD="$ac_save_MAGIC_CMD"
+   ;;
+ esac
+ fi
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if test -n "$MAGIC_CMD"; then
+   echo "$as_me:3526: result: $MAGIC_CMD" >&5
+ echo "${ECHO_T}$MAGIC_CMD" >&6
+ else
+   echo "$as_me:3529: result: no" >&5
+ echo "${ECHO_T}no" >&6
+ fi
+   else
+     MAGIC_CMD=:
+   fi
+ fi
+   fi
+   ;;
+ esac
+ if test -n "$ac_tool_prefix"; then
+   # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+ echo "$as_me:3545: checking for $ac_word" >&5
+ echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+ if test "${ac_cv_prog_RANLIB+set}" = set; then
+   echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+   if test -n "$RANLIB"; then
+   ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+ else
+   ac_save_IFS=$IFS; IFS=$ac_path_separator
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+   IFS=$ac_save_IFS
+   test -z "$ac_dir" && ac_dir=.
+   $as_executable_p "$ac_dir/$ac_word" || continue
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ echo "$as_me:3560: found $ac_dir/$ac_word" >&5
+ break
+ done
+ fi
+ fi
+ RANLIB=$ac_cv_prog_RANLIB
+ if test -n "$RANLIB"; then
+   echo "$as_me:3568: result: $RANLIB" >&5
+ echo "${ECHO_T}$RANLIB" >&6
+ else
+   echo "$as_me:3571: result: no" >&5
+ echo "${ECHO_T}no" >&6
+ fi
+ fi
+ if test -z "$ac_cv_prog_RANLIB"; then
+   ac_ct_RANLIB=$RANLIB
+   # Extract the first word of "ranlib", so it can be a program name with args.
+ set dummy ranlib; ac_word=$2
+ echo "$as_me:3580: checking for $ac_word" >&5
+ echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+ if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
+   echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+   if test -n "$ac_ct_RANLIB"; then
+   ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+ else