code/trunk/RunTest.bat

@echo off
@rem This file must use CRLF linebreaks to function properly
@rem and requires both pcretest and pcregrep
@rem  This file was originally contributed by Ralf Junker, and touched up by
@rem  Daniel Richard G. Tests 10-12 added by Philip H.
@rem  Philip H also changed test 3 to use "wintest" files.
@rem
@rem  Updated by Tom Fortmann to support explicit test numbers on the command line.
@rem  Added argument validation and added error reporting.
@rem
@rem  MS Windows batch file to run pcretest on testfiles with the correct
@rem  options.
@rem
@rem Sheri Pierce added logic to skip feature dependent tests
@rem tests 4 5 8 and 12 require utf8 support
@rem tests 6 9 13 require ucp support
@rem 10 requires ucp and link size 2
@rem 14 requires presense of jit support
@rem 15 requires absence of jit support
@rem Sheri P also added override tests for study and jit testing

setlocal enabledelayedexpansion
if [%srcdir%]==[] (
if exist testdata\ set srcdir=.)
if [%srcdir%]==[] (
if exist ..\testdata\ set srcdir=..)
if [%srcdir%]==[] (
if exist ..\..\testdata\ set srcdir=..\..)
if NOT exist "%srcdir%\testdata\" (
Error: echo distribution testdata folder not found.
call :conferror
exit /b 1
goto :eof
)

if "%pcregrep%"=="" set pcregrep=.\pcregrep.exe
if "%pcretest%"=="" set pcretest=.\pcretest.exe

echo source dir is %srcdir%
echo pcretest=%pcretest%
echo pcregrep=%pcregrep%

if NOT exist "%pcregrep%" (
echo Error: "%pcregrep%" not found.
echo.
call :conferror
exit /b 1
)

if NOT exist "%pcretest%" (
echo Error: "%pcretest%" not found.
echo.
call :conferror
exit /b 1
)

"%pcretest%" -C|"%pcregrep%" --no-jit "No UTF-8 support">NUL
set utf8=%ERRORLEVEL%
"%pcretest%" -C|"%pcregrep%" --no-jit "No Unicode properties support">NUL
set ucp=%ERRORLEVEL%
"%pcretest%" -C|"%pcregrep%" --no-jit "No just-in-time compiler support">NUL
set jit=%ERRORLEVEL%
"%pcretest%" -C|"%pcregrep%" --no-jit "Internal link size = 2">NUL
set link2=%ERRORLEVEL%
set ucpandlink2=0
if %ucp% EQU 1 (
 if %link2% EQU 0 set ucpandlink2=1
)

if not exist testout md testout
if not exist testoutstudy md testoutstudy
if not exist testoutjit md testoutjit

set do1=no
set do2=no
set do3=no
set do4=no
set do5=no
set do6=no
set do7=no
set do8=no
set do9=no
set do10=no
set do11=no
set do12=no
set do13=no
set do14=no
set do15=no
set all=yes

for %%a in (%*) do (
  set valid=no
  for %%v in (1 2 3 4 5 6 7 8 9 10 11 12 13 14 15) do if %%v == %%a set valid=yes
  if "!valid!" == "yes" (
    set do%%a=yes
    set all=no
) else (
    echo Invalid test number - %%a!
        echo Usage %0 [ test_number ] ...
        echo Where test_number is one or more optional test numbers 1 through 15, default is all tests.
        exit /b 1
)
)
set failed="no"

if "%all%" == "yes" (
  set do1=yes
  set do2=yes
  set do3=yes
  set do4=yes
  set do5=yes
  set do6=yes
  set do7=yes
  set do8=yes
  set do9=yes
  set do10=yes
  set do11=yes
  set do12=yes
  set do13=yes
  set do14=yes
  set do15=yes
)

@echo RunTest.bat's pcretest output is written to newly created subfolders named
@echo testout, testoutstudy and testoutjit.
@echo.
if "%do1%" == "yes" call :do1
if "%do2%" == "yes" call :do2
if "%do3%" == "yes" call :do3
if "%do4%" == "yes" call :do4
if "%do5%" == "yes" call :do5
if "%do6%" == "yes" call :do6
if "%do7%" == "yes" call :do7
if "%do8%" == "yes" call :do8
if "%do9%" == "yes" call :do9
if "%do10%" == "yes" call :do10
if "%do11%" == "yes" call :do11
if "%do12%" == "yes" call :do12
if "%do13%" == "yes" call :do13
if "%do14%" == "yes" call :do14
if "%do15%" == "yes" call :do15
if %failed% == "yes" (
echo In above output, one or more of the various tests failed!
exit /b 1
)
echo All OK
goto :eof

:runsub
@rem Function to execute pcretest and compare the output
@rem Arguments are as follows:
@rem
@rem       1 = test number
@rem       2 = outputdir
@rem       3 = test name use double quotes
@rem   4 - 9 = pcretest options

if [%1] == [] (
  echo Missing test number argument!
  exit /b 1
)

if [%2] == [] (
  echo Missing outputdir!
  exit /b 1
)

if [%3] == [] (
  echo Missing test name argument!
  exit /b 1
)

set testinput=testinput%1
set testoutput=testoutput%1
if exist %srcdir%\testdata\win%testinput% (
  set testinput=wintestinput%1
  set testoutput=wintestoutput%1
)

echo Test %1: %3
"%pcretest%" %4 %5 %6 %7 %8 %9 "%srcdir%\testdata\%testinput%">%2\%testoutput%
if errorlevel 1 (
  echo.          failed executing command-line:
  echo.            "%pcretest%" %4 %5 %6 %7 %8 %9 "%srcdir%\testdata\%testinput%"^>%2\%testoutput%
  set failed="yes"
  goto :eof
)

fc /n "%srcdir%\testdata\%testoutput%" "%2\%testoutput%">NUL
if errorlevel 1 (
  echo.          failed comparison: fc /n "%srcdir%\testdata\%testoutput%" "%2\%testoutput%"
  set failed="yes"
  if [%1]==[2] (
    echo.
    echo ** Test 2 requires a lot of stack. PCRE can be configured to
    echo ** use heap for recursion. Otherwise, to pass Test 2
    echo ** you generally need to allocate 8 mb stack to PCRE.
    echo ** See the 'pcrestack' page for a discussion of PCRE's
    echo ** stack usage.
    echo.
)
  if [%1]==[3] (
    echo.
    echo ** Test 3 failure usually means french locale is not
    echo ** available on the system, rather than a bug or problem with PCRE.
    echo.
)

  goto :eof
)

echo.          Passed.
goto :eof

:do1
call :runsub 1 testout "Main functionality - Compatible with Perl 5.8 and above" -q
call :runsub 1 testoutstudy "Test with Study Override" -q -s
if %jit% EQU 1 call :runsub 1 testoutjit "Test with JIT Override" -q -s+
goto :eof

:do2
  call :runsub 2 testout "API, errors, internals, and non-Perl stuff" -q
  call :runsub 2 testoutstudy "Test with Study Override" -q -s
  if %jit% EQU 1 call :runsub 2 testoutjit "Test with JIT Override" -q -s+
goto :eof

:do3
  call :runsub 3 testout "Locale-specific features" -q
  call :runsub 3 testoutstudy "Test with Study Override" -q -s
  if %jit% EQU 1 call :runsub 3 testoutjit "Test with JIT Override" -q -s+
goto :eof

:do4
  if %utf8% EQU 0 (
  echo Test 4 Skipped due to absence of UTF-8 support.
  goto :eof
)
  call :runsub 4 testout "UTF-8 support - Compatible with Perl 5.8 and above" -q
  call :runsub 4 testoutstudy "Test with Study Override" -q -s
  if %jit% EQU 1 call :runsub 4 testoutjit "Test with JIT Override" -q -s+
goto :eof

:do5
  if %utf8% EQU 0 (
  echo Test 5 Skipped due to absence of UTF-8 support.
  goto :eof
)
  call :runsub 5 testout "API, internals, and non-Perl stuff for UTF-8 support" -q
  call :runsub 5 testoutstudy "Test with Study Override" -q -s
  if %jit% EQU 1 call :runsub 5 testoutjit "Test with JIT Override" -q -s+
goto :eof

:do6
if %ucp% EQU 0 (
  echo Test 6 Skipped due to absence of ucp support.
  goto :eof
)
  call :runsub 6 testout "Unicode property support - Compatible with Perl 5.10 and above" -q
  call :runsub 6 testoutstudy "Test with Study Override" -q -s
  if %jit% EQU 1 call :runsub 6 testoutjit "Test with JIT Override" -q -s+
goto :eof

:do7
  call :runsub 7 testout "DFA matching" -q -dfa
  call :runsub 7 testoutstudy "Test with Study Override" -q -dfa -s
  if %jit% EQU 1 call :runsub 7 testoutjit "Test with JIT Override" -q -dfa -s+
goto :eof

:do8
  if %utf8% EQU 0 (
  echo Test 8 Skipped due to absence of UTF-8 support.
  goto :eof
)
  call :runsub 8 testout "DFA matching with UTF-8" -q -dfa
  call :runsub 8 testoutstudy "Test with Study Override" -q -dfa -s
  if %jit% EQU 1 call :runsub 8 testoutjit "Test with JIT Override" -q -dfa -s+
  goto :eof

:do9
  if %ucp% EQU 0 (
  echo Test 9 Skipped due to absence of ucp support.
  goto :eof
)
  call :runsub 9 testout "DFA matching with Unicode properties" -q -dfa
  call :runsub 9 testoutstudy "Test with Study Override" -q -dfa -s
  if %jit% EQU 1 call :runsub 9 testoutjit "Test with JIT Override" -q -dfa -s+
goto :eof

:do10
  if %ucpandlink2% EQU 0 (
  echo Test 10 Skipped due to requirements of ucp support AND link size 2.
  goto :eof
)
  call :runsub 10 testout "Internal offsets and code size tests" -q
  call :runsub 10 testoutstudy "Test with Study Override" -q -s
  if %jit% EQU 1 call :runsub 10 testoutjit "Test with JIT Override" -q -s+
goto :eof

:do11
  call :runsub 11 testout "Features from Perl 5.10 and above" -q
  call :runsub 11 testoutstudy "Test with Study Override" -q -s
  if %jit% EQU 1 call :runsub 11 testoutjit "Test with JIT Override" -q -s+
goto :eof

:do12
  if %utf8% EQU 0 (
  echo Test 12 Skipped due to absence of UTF-8 support.
  goto :eof
)
  call :runsub 12 testout "Features from Perl 5.10 and above w UTF-8" -q
  call :runsub 12 testoutstudy "Test with Study Override" -q -s
  if %jit% EQU 1 call :runsub 12 testoutjit "Test with JIT Override" -q -s+
goto :eof

:do13
  if %ucp% EQU 0 (
  echo Test 13 Skipped due to absence of ucp support.
  goto :eof
)
call :runsub 13 testout "API internals and non-Perl stuff for Unicode property support" -q
call :runsub 13 testoutstudy "Test with Study Override" -q -s
if %jit% EQU 1 call :runsub 13 testoutjit "Test with JIT Override" -q -s+
goto :eof

:do14
if %jit% EQU 0 (
  echo Test 14 Skipped due to absence of JIT support.
  goto :eof
)
  call :runsub 14 testout "JIT-specific features - have JIT" -q
  call :runsub 14 testoutstudy "Test with Study Override" -q -s
  call :runsub 14 testoutjit "Test with JIT Override" -q -s+
goto :eof

:do15
  if %jit% EQU 1 (
  echo Test 15 Skipped due to presence of JIT support.
  goto :eof
)
  call :runsub 15 testout "JIT-specific features - no JIT" -q
  call :runsub 15 testoutstudy "Test with Study Override" -q -s
goto :eof

:conferror
@echo Configuration error.
@echo.
@echo If configured with cmake and executed via "make test" or the MSVC "RUN_TESTS"
@echo project, pcre_test.bat defines variables and automatically calls RunTest.bat.
@echo For manual testing of all available features, after configuring with cmake
@echo and building, you can run the built pcre_test.bat. For best results with
@echo cmake builds and tests avoid directories with full path names that include
@echo spaces for source or build.
@echo.
@echo Otherwise, if the build dir is in a subdir of the source dir, testdata needed
@echo for input and verification should be found automatically when (from the
@echo location of the the built exes) you call RunTest.bat. By default RunTest.bat
@echo runs all tests compatible with the linked pcre library but it can be given
@echo a test number as an argument.
@echo.
@echo If the build dir is not under the source dir you can either copy your exes
@echo to the source folder or copy RunTest.bat and the testdata folder to the
@echo location of your built exes and then run RunTest.bat.
@echo.
goto :eof
1	ph10	709	@echo off
2			@rem This file must use CRLF linebreaks to function properly
3	ph10	719	@rem and requires both pcretest and pcregrep
4			@rem This file was originally contributed by Ralf Junker, and touched up by
5	ph10	709	@rem Daniel Richard G. Tests 10-12 added by Philip H.
6			@rem Philip H also changed test 3 to use "wintest" files.
7			@rem
8			@rem Updated by Tom Fortmann to support explicit test numbers on the command line.
9			@rem Added argument validation and added error reporting.
10			@rem
11			@rem MS Windows batch file to run pcretest on testfiles with the correct
12			@rem options.
13			@rem
14			@rem Sheri Pierce added logic to skip feature dependent tests
15			@rem tests 4 5 8 and 12 require utf8 support
16			@rem tests 6 9 13 require ucp support
17			@rem 10 requires ucp and link size 2
18			@rem 14 requires presense of jit support
19			@rem 15 requires absence of jit support
20			@rem Sheri P also added override tests for study and jit testing
21
22			setlocal enabledelayedexpansion
23	ph10	719	if [%srcdir%]==[] (
24			if exist testdata\ set srcdir=.)
25			if [%srcdir%]==[] (
26			if exist ..\testdata\ set srcdir=..)
27			if [%srcdir%]==[] (
28			if exist ..\..\testdata\ set srcdir=..\..)
29			if NOT exist "%srcdir%\testdata\" (
30			Error: echo distribution testdata folder not found.
31			call :conferror
32	ph10	709	exit /b 1
33			goto :eof
34			)
35
36	ph10	719	if "%pcregrep%"=="" set pcregrep=.\pcregrep.exe
37			if "%pcretest%"=="" set pcretest=.\pcretest.exe
38
39			echo source dir is %srcdir%
40			echo pcretest=%pcretest%
41			echo pcregrep=%pcregrep%
42
43			if NOT exist "%pcregrep%" (
44			echo Error: "%pcregrep%" not found.
45			echo.
46			call :conferror
47			exit /b 1
48			)
49
50			if NOT exist "%pcretest%" (
51			echo Error: "%pcretest%" not found.
52			echo.
53			call :conferror
54			exit /b 1
55			)
56
57			"%pcretest%" -C\|"%pcregrep%" --no-jit "No UTF-8 support">NUL
58	ph10	709	set utf8=%ERRORLEVEL%
59	ph10	719	"%pcretest%" -C\|"%pcregrep%" --no-jit "No Unicode properties support">NUL
60	ph10	709	set ucp=%ERRORLEVEL%
61	ph10	719	"%pcretest%" -C\|"%pcregrep%" --no-jit "No just-in-time compiler support">NUL
62	ph10	709	set jit=%ERRORLEVEL%
63	ph10	719	"%pcretest%" -C\|"%pcregrep%" --no-jit "Internal link size = 2">NUL
64	ph10	709	set link2=%ERRORLEVEL%
65			set ucpandlink2=0
66			if %ucp% EQU 1 (
67			if %link2% EQU 0 set ucpandlink2=1
68			)
69
70			if not exist testout md testout
71			if not exist testoutstudy md testoutstudy
72			if not exist testoutjit md testoutjit
73
74			set do1=no
75			set do2=no
76			set do3=no
77			set do4=no
78			set do5=no
79			set do6=no
80			set do7=no
81			set do8=no
82			set do9=no
83			set do10=no
84			set do11=no
85			set do12=no
86			set do13=no
87			set do14=no
88			set do15=no
89			set all=yes
90
91			for %%a in (%*) do (
92			set valid=no
93			for %%v in (1 2 3 4 5 6 7 8 9 10 11 12 13 14 15) do if %%v == %%a set valid=yes
94			if "!valid!" == "yes" (
95			set do%%a=yes
96			set all=no
97			) else (
98			echo Invalid test number - %%a!
99			echo Usage %0 [ test_number ] ...
100			echo Where test_number is one or more optional test numbers 1 through 15, default is all tests.
101			exit /b 1
102			)
103			)
104	ph10	719	set failed="no"
105
106	ph10	709	if "%all%" == "yes" (
107			set do1=yes
108			set do2=yes
109			set do3=yes
110			set do4=yes
111			set do5=yes
112			set do6=yes
113			set do7=yes
114			set do8=yes
115			set do9=yes
116			set do10=yes
117			set do11=yes
118			set do12=yes
119			set do13=yes
120			set do14=yes
121			set do15=yes
122			)
123
124	ph10	719	@echo RunTest.bat's pcretest output is written to newly created subfolders named
125			@echo testout, testoutstudy and testoutjit.
126			@echo.
127	ph10	709	if "%do1%" == "yes" call :do1
128			if "%do2%" == "yes" call :do2
129			if "%do3%" == "yes" call :do3
130			if "%do4%" == "yes" call :do4
131			if "%do5%" == "yes" call :do5
132			if "%do6%" == "yes" call :do6
133			if "%do7%" == "yes" call :do7
134			if "%do8%" == "yes" call :do8
135			if "%do9%" == "yes" call :do9
136			if "%do10%" == "yes" call :do10
137			if "%do11%" == "yes" call :do11
138			if "%do12%" == "yes" call :do12
139			if "%do13%" == "yes" call :do13
140			if "%do14%" == "yes" call :do14
141			if "%do15%" == "yes" call :do15
142	ph10	719	if %failed% == "yes" (
143			echo In above output, one or more of the various tests failed!
144			exit /b 1
145			)
146			echo All OK
147	ph10	709	goto :eof
148
149			:runsub
150			@rem Function to execute pcretest and compare the output
151			@rem Arguments are as follows:
152			@rem
153			@rem 1 = test number
154			@rem 2 = outputdir
155			@rem 3 = test name use double quotes
156			@rem 4 - 9 = pcretest options
157
158			if [%1] == [] (
159			echo Missing test number argument!
160			exit /b 1
161			)
162
163			if [%2] == [] (
164			echo Missing outputdir!
165			exit /b 1
166			)
167
168			if [%3] == [] (
169			echo Missing test name argument!
170			exit /b 1
171			)
172
173			set testinput=testinput%1
174			set testoutput=testoutput%1
175			if exist %srcdir%\testdata\win%testinput% (
176			set testinput=wintestinput%1
177			set testoutput=wintestoutput%1
178			)
179
180			echo Test %1: %3
181	ph10	719	"%pcretest%" %4 %5 %6 %7 %8 %9 "%srcdir%\testdata\%testinput%">%2\%testoutput%
182	ph10	709	if errorlevel 1 (
183	ph10	719	echo. failed executing command-line:
184			echo. "%pcretest%" %4 %5 %6 %7 %8 %9 "%srcdir%\testdata\%testinput%"^>%2\%testoutput%
185			set failed="yes"
186	ph10	709	goto :eof
187			)
188
189	ph10	719	fc /n "%srcdir%\testdata\%testoutput%" "%2\%testoutput%">NUL
190	ph10	709	if errorlevel 1 (
191	ph10	719	echo. failed comparison: fc /n "%srcdir%\testdata\%testoutput%" "%2\%testoutput%"
192			set failed="yes"
193			if [%1]==[2] (
194			echo.
195			echo ** Test 2 requires a lot of stack. PCRE can be configured to
196			echo ** use heap for recursion. Otherwise, to pass Test 2
197			echo ** you generally need to allocate 8 mb stack to PCRE.
198			echo ** See the 'pcrestack' page for a discussion of PCRE's
199			echo ** stack usage.
200			echo.
201			)
202			if [%1]==[3] (
203			echo.
204			echo ** Test 3 failure usually means french locale is not
205			echo ** available on the system, rather than a bug or problem with PCRE.
206			echo.
207			)
208
209	ph10	709	goto :eof
210			)
211
212	ph10	719	echo. Passed.
213	ph10	709	goto :eof
214
215			:do1
216			call :runsub 1 testout "Main functionality - Compatible with Perl 5.8 and above" -q
217			call :runsub 1 testoutstudy "Test with Study Override" -q -s
218			if %jit% EQU 1 call :runsub 1 testoutjit "Test with JIT Override" -q -s+
219			goto :eof
220
221			:do2
222			call :runsub 2 testout "API, errors, internals, and non-Perl stuff" -q
223			call :runsub 2 testoutstudy "Test with Study Override" -q -s
224			if %jit% EQU 1 call :runsub 2 testoutjit "Test with JIT Override" -q -s+
225			goto :eof
226
227			:do3
228			call :runsub 3 testout "Locale-specific features" -q
229			call :runsub 3 testoutstudy "Test with Study Override" -q -s
230			if %jit% EQU 1 call :runsub 3 testoutjit "Test with JIT Override" -q -s+
231			goto :eof
232
233			:do4
234			if %utf8% EQU 0 (
235			echo Test 4 Skipped due to absence of UTF-8 support.
236			goto :eof
237			)
238			call :runsub 4 testout "UTF-8 support - Compatible with Perl 5.8 and above" -q
239			call :runsub 4 testoutstudy "Test with Study Override" -q -s
240			if %jit% EQU 1 call :runsub 4 testoutjit "Test with JIT Override" -q -s+
241			goto :eof
242
243			:do5
244			if %utf8% EQU 0 (
245			echo Test 5 Skipped due to absence of UTF-8 support.
246			goto :eof
247			)
248			call :runsub 5 testout "API, internals, and non-Perl stuff for UTF-8 support" -q
249			call :runsub 5 testoutstudy "Test with Study Override" -q -s
250			if %jit% EQU 1 call :runsub 5 testoutjit "Test with JIT Override" -q -s+
251			goto :eof
252
253			:do6
254			if %ucp% EQU 0 (
255			echo Test 6 Skipped due to absence of ucp support.
256			goto :eof
257			)
258			call :runsub 6 testout "Unicode property support - Compatible with Perl 5.10 and above" -q
259			call :runsub 6 testoutstudy "Test with Study Override" -q -s
260			if %jit% EQU 1 call :runsub 6 testoutjit "Test with JIT Override" -q -s+
261			goto :eof
262
263			:do7
264			call :runsub 7 testout "DFA matching" -q -dfa
265			call :runsub 7 testoutstudy "Test with Study Override" -q -dfa -s
266			if %jit% EQU 1 call :runsub 7 testoutjit "Test with JIT Override" -q -dfa -s+
267			goto :eof
268
269			:do8
270			if %utf8% EQU 0 (
271			echo Test 8 Skipped due to absence of UTF-8 support.
272			goto :eof
273			)
274			call :runsub 8 testout "DFA matching with UTF-8" -q -dfa
275			call :runsub 8 testoutstudy "Test with Study Override" -q -dfa -s
276			if %jit% EQU 1 call :runsub 8 testoutjit "Test with JIT Override" -q -dfa -s+
277			goto :eof
278
279			:do9
280			if %ucp% EQU 0 (
281			echo Test 9 Skipped due to absence of ucp support.
282			goto :eof
283			)
284			call :runsub 9 testout "DFA matching with Unicode properties" -q -dfa
285			call :runsub 9 testoutstudy "Test with Study Override" -q -dfa -s
286			if %jit% EQU 1 call :runsub 9 testoutjit "Test with JIT Override" -q -dfa -s+
287			goto :eof
288
289			:do10
290			if %ucpandlink2% EQU 0 (
291			echo Test 10 Skipped due to requirements of ucp support AND link size 2.
292			goto :eof
293			)
294			call :runsub 10 testout "Internal offsets and code size tests" -q
295			call :runsub 10 testoutstudy "Test with Study Override" -q -s
296			if %jit% EQU 1 call :runsub 10 testoutjit "Test with JIT Override" -q -s+
297			goto :eof
298
299			:do11
300			call :runsub 11 testout "Features from Perl 5.10 and above" -q
301			call :runsub 11 testoutstudy "Test with Study Override" -q -s
302			if %jit% EQU 1 call :runsub 11 testoutjit "Test with JIT Override" -q -s+
303			goto :eof
304
305			:do12
306			if %utf8% EQU 0 (
307			echo Test 12 Skipped due to absence of UTF-8 support.
308			goto :eof
309			)
310			call :runsub 12 testout "Features from Perl 5.10 and above w UTF-8" -q
311			call :runsub 12 testoutstudy "Test with Study Override" -q -s
312			if %jit% EQU 1 call :runsub 12 testoutjit "Test with JIT Override" -q -s+
313			goto :eof
314
315			:do13
316			if %ucp% EQU 0 (
317			echo Test 13 Skipped due to absence of ucp support.
318			goto :eof
319			)
320			call :runsub 13 testout "API internals and non-Perl stuff for Unicode property support" -q
321			call :runsub 13 testoutstudy "Test with Study Override" -q -s
322			if %jit% EQU 1 call :runsub 13 testoutjit "Test with JIT Override" -q -s+
323			goto :eof
324
325			:do14
326			if %jit% EQU 0 (
327			echo Test 14 Skipped due to absence of JIT support.
328			goto :eof
329			)
330			call :runsub 14 testout "JIT-specific features - have JIT" -q
331			call :runsub 14 testoutstudy "Test with Study Override" -q -s
332			call :runsub 14 testoutjit "Test with JIT Override" -q -s+
333			goto :eof
334
335			:do15
336			if %jit% EQU 1 (
337			echo Test 15 Skipped due to presence of JIT support.
338			goto :eof
339			)
340			call :runsub 15 testout "JIT-specific features - no JIT" -q
341			call :runsub 15 testoutstudy "Test with Study Override" -q -s
342			goto :eof
343	ph10	719
344			:conferror
345			@echo Configuration error.
346			@echo.
347			@echo If configured with cmake and executed via "make test" or the MSVC "RUN_TESTS"
348			@echo project, pcre_test.bat defines variables and automatically calls RunTest.bat.
349			@echo For manual testing of all available features, after configuring with cmake
350			@echo and building, you can run the built pcre_test.bat. For best results with
351			@echo cmake builds and tests avoid directories with full path names that include
352			@echo spaces for source or build.
353			@echo.
354			@echo Otherwise, if the build dir is in a subdir of the source dir, testdata needed
355			@echo for input and verification should be found automatically when (from the
356			@echo location of the the built exes) you call RunTest.bat. By default RunTest.bat
357			@echo runs all tests compatible with the linked pcre library but it can be given
358			@echo a test number as an argument.
359			@echo.
360			@echo If the build dir is not under the source dir you can either copy your exes
361			@echo to the source folder or copy RunTest.bat and the testdata folder to the
362			@echo location of your built exes and then run RunTest.bat.
363			@echo.
364			goto :eof