Contents of /code/trunk/README

README file for PCRE (Perl-compatible regular expressions)
----------------------------------------------------------

*******************************************************************************
*           IMPORTANT FOR THOSE UPGRADING FROM VERSIONS BEFORE 2.00           *
*                                                                             *
* Please note that there has been a change in the API such that a larger      *
* ovector is required at matching time, to provide some additional workspace. *
* The new man page has details. This change was necessary in order to support *
* some of the new functionality in Perl 5.005.                                *
*******************************************************************************

The distribution should contain the following files:

  ChangeLog         log of changes to the code
  Makefile          for building PCRE
  README            this file
  RunTest           a shell script for running tests
  Tech.Notes        notes on the encoding
  pcre.3            man page for the functions
  pcreposix.3       man page for the POSIX wrapper API
  maketables.c      auxiliary program for building chartables.c
  study.c           ) source of
  pcre.c            )   the functions
  pcreposix.c       )
  pcre.h            header for the external API
  pcreposix.h       header for the external POSIX wrapper API
  internal.h        header for internal use
  pcretest.c        test program
  pgrep.1           man page for pgrep
  pgrep.c           source of a grep utility that uses PCRE
  perltest          Perl test program
  testinput         test data, compatible with Perl 5.004 and 5.005
  testinput2        test data for error messages and non-Perl things
  testinput3        test data, compatible with Perl 5.005
  testoutput        test results corresponding to testinput
  testoutput2       test results corresponding to testinput2
  testoutput3       test results corresponding to testinpug3

To build PCRE, edit Makefile for your system (it is a fairly simple make file,
and there are some comments at the top) and then run it. It builds two
libraries called libpcre.a and libpcreposix.a, a test program called pcretest,
and the pgrep command.

To test PCRE, run the RunTest script in the pcre directory. This runs pcretest
on each of the testinput files in turn, and compares the output with the
contents of the corresponding testoutput file. A file called testtry is used to
hold the output from pcretest (which is documented below).

To run pcretest on just one of the test files, give its number as an argument
to RunTest, for example:

  RunTest 3

The first and third test files can also be fed directly into the perltest
program to check that Perl gives the same results. The third file requires the
additional features of release 5.005, which is why it is kept separate from the
main test input, which needs only Perl 5.004. In the long run, when 5.005 is
widespread, these two test files may get amalgamated.

The second set of tests check pcre_info(), pcre_study(), error detection and
run-time flags that are specific to PCRE, as well as the POSIX wrapper API.

To install PCRE, copy libpcre.a to any suitable library directory (e.g.
/usr/local/lib), pcre.h to any suitable include directory (e.g.
/usr/local/include), and pcre.3 to any suitable man directory (e.g.
/usr/local/man/man3).

To install the pgrep command, copy it to any suitable binary directory, (e.g.
/usr/local/bin) and pgrep.1 to any suitable man directory (e.g.
/usr/local/man/man1).

PCRE has its own native API, but a set of "wrapper" functions that are based on
the POSIX API are also supplied in the library libpcreposix.a. Note that this
just provides a POSIX calling interface to PCRE: the regular expressions
themselves still follow Perl syntax and semantics. The header file
for the POSIX-style functions is called pcreposix.h. The official POSIX name is
regex.h, but I didn't want to risk possible problems with existing files of
that name by distributing it that way. To use it with an existing program that
uses the POSIX API, it will have to be renamed or pointed at by a link.


Character tables
----------------

PCRE uses four tables for manipulating and identifying characters. These are
compiled from a source file called chartables.c. This is not supplied in
the distribution, but is built by the program maketables (compiled from
maketables.c), which uses the ANSI C character handling functions such as
isalnum(), isalpha(), isupper(), islower(), etc. to build the table sources.
This means that the default C locale set in your system may affect the contents
of the tables. You can change the tables by editing chartables.c and then
re-building PCRE. If you do this, you should probably also edit Makefile to
ensure that the file doesn't ever get re-generated.

The first two tables pcre_lcc[] and pcre_fcc[] provide lower casing and a
case flipping functions, respectively. The pcre_cbits[] table consists of four
32-byte bit maps which identify digits, letters, "word" characters, and white
space, respectively. These are used when building 32-byte bit maps that
represent character classes.

The pcre_ctypes[] table has bits indicating various character types, as
follows:

    1   white space character
    2   letter
    4   decimal digit
    8   hexadecimal digit
   16   alphanumeric or '_'
  128   regular expression metacharacter or binary zero

You should not alter the set of characters that contain the 128 bit, as that
will cause PCRE to malfunction.


The pcretest program
--------------------

This program is intended for testing PCRE, but it can also be used for
experimenting with regular expressions.

If it is given two filename arguments, it reads from the first and writes to
the second. If it is given only one filename argument, it reads from that file
and writes to stdout. Otherwise, it reads from stdin and writes to stdout, and
prompts for each line of input.

The program handles any number of sets of input on a single input file. Each
set starts with a regular expression, and continues with any number of data
lines to be matched against the pattern. An empty line signals the end of the
set. The regular expressions are given enclosed in any non-alphameric
delimiters, for example

  /(a|bc)x+yz/

and may be followed by i, m, s, or x to set the PCRE_CASELESS, PCRE_MULTILINE,
PCRE_DOTALL, or PCRE_EXTENDED options, respectively. These options have the
same effect as they do in Perl.

There are also some upper case options that do not match Perl options: /A, /E,
and /X set PCRE_ANCHORED, PCRE_DOLLAR_ENDONLY, and PCRE_EXTRA respectively.
The /D option is a PCRE debugging feature. It causes the internal form of
compiled regular expressions to be output after compilation. The /S option
causes pcre_study() to be called after the expression has been compiled, and
the results used when the expression is matched.

Finally, the /P option causes pcretest to call PCRE via the POSIX wrapper API
rather than its native API. When this is done, all other options except /i and
/m are ignored. REG_ICASE is set if /i is present, and REG_NEWLINE is set if /m
is present. The wrapper functions force PCRE_DOLLAR_ENDONLY always, and
PCRE_DOTALL unless REG_NEWLINE is set.

A regular expression can extend over several lines of input; the newlines are
included in it. See the testinput files for many examples.

Before each data line is passed to pcre_exec(), leading and trailing whitespace
is removed, and it is then scanned for \ escapes. The following are recognized:

  \a     alarm (= BEL)
  \b     backspace
  \e     escape
  \f     formfeed
  \n     newline
  \r     carriage return
  \t     tab
  \v     vertical tab
  \nnn   octal character (up to 3 octal digits)
  \xhh   hexadecimal character (up to 2 hex digits)

  \A     pass the PCRE_ANCHORED option to pcre_exec()
  \B     pass the PCRE_NOTBOL option to pcre_exec()
  \Odd   set the size of the output vector passed to pcre_exec() to dd
           (any number of decimal digits)
  \Z     pass the PCRE_NOTEOL option to pcre_exec()

A backslash followed by anything else just escapes the anything else. If the
very last character is a backslash, it is ignored. This gives a way of passing
an empty line as data, since a real empty line terminates the data input.

If /P was present on the regex, causing the POSIX wrapper API to be used, only
\B, and \Z have any effect, causing REG_NOTBOL and REG_NOTEOL to be passed to
regexec() respectively.

When a match succeeds, pcretest outputs the list of identified substrings that
pcre_exec() returns, starting with number 0 for the string that matched the
whole pattern. Here is an example of an interactive pcretest run.

  $ pcretest
  Testing Perl-Compatible Regular Expressions
  PCRE version 0.90 08-Sep-1997

    re> /^abc(\d+)/
  data> abc123
    0: abc123
    1: 123
  data> xyz
  No match

Note that while patterns can be continued over several lines (a plain ">"
prompt is used for continuations), data lines may not. However newlines can be
included in data by means of the \n escape.

If the -p option is given to pcretest, it is equivalent to adding /P to each
regular expression: the POSIX wrapper API is used to call PCRE. None of the
following flags has any effect in this case.

If the option -d is given to pcretest, it is equivalent to adding /D to each
regular expression: the internal form is output after compilation.

If the option -i (for "information") is given to pcretest, it calls pcre_info()
after compiling an expression, and outputs the information it gets back. If the
pattern is studied, the results of that are also output.

If the option -s is given to pcretest, it outputs the size of each compiled
pattern after it has been compiled.

If the -t option is given, each compile, study, and match is run 10000 times
while being timed, and the resulting time per compile or match is output in
milliseconds. Do not set -t with -s, because you will then get the size output
10000 times and the timing will be distorted. If you want to change the number
of repetitions used for timing, edit the definition of LOOPREPEAT at the top of
pcretest.c


The perltest program
--------------------

The perltest program tests Perl's regular expressions; it has the same
specification as pcretest, and so can be given identical input, except that
input patterns can be followed only by Perl's lower case options. The contents
of testinput and testinput3 meet this condition.

The data lines are processed as Perl strings, so if they contain $ or @
characters, these have to be escaped. For this reason, all such characters in
the testinput file are escaped so that it can be used for perltest as well as
for pcretest, and the special upper case options such as /A that pcretest
recognizes are not used in this file. The output should be identical, apart
from the initial identifying banner.

The testinput2 file is not suitable for feeding to Perltest, since it does
make use of the special upper case options and escapes that pcretest uses to
test some features of PCRE. It also contains malformed regular expressions, in
order to check that PCRE diagnoses them correctly.

Philip Hazel <ph10@cam.ac.uk>
September 1998
1	README file for PCRE (Perl-compatible regular expressions)
2	----------------------------------------------------------
3
4	*******************************************************************************
5	* IMPORTANT FOR THOSE UPGRADING FROM VERSIONS BEFORE 2.00 *
6	* *
7	* Please note that there has been a change in the API such that a larger *
8	* ovector is required at matching time, to provide some additional workspace. *
9	* The new man page has details. This change was necessary in order to support *
10	* some of the new functionality in Perl 5.005. *
11	*******************************************************************************
12
13	The distribution should contain the following files:
14
15	ChangeLog log of changes to the code
16	Makefile for building PCRE
17	README this file
18	RunTest a shell script for running tests
19	Tech.Notes notes on the encoding
20	pcre.3 man page for the functions
21	pcreposix.3 man page for the POSIX wrapper API
22	maketables.c auxiliary program for building chartables.c
23	study.c ) source of
24	pcre.c ) the functions
25	pcreposix.c )
26	pcre.h header for the external API
27	pcreposix.h header for the external POSIX wrapper API
28	internal.h header for internal use
29	pcretest.c test program
30	pgrep.1 man page for pgrep
31	pgrep.c source of a grep utility that uses PCRE
32	perltest Perl test program
33	testinput test data, compatible with Perl 5.004 and 5.005
34	testinput2 test data for error messages and non-Perl things
35	testinput3 test data, compatible with Perl 5.005
36	testoutput test results corresponding to testinput
37	testoutput2 test results corresponding to testinput2
38	testoutput3 test results corresponding to testinpug3
39
40	To build PCRE, edit Makefile for your system (it is a fairly simple make file,
41	and there are some comments at the top) and then run it. It builds two
42	libraries called libpcre.a and libpcreposix.a, a test program called pcretest,
43	and the pgrep command.
44
45	To test PCRE, run the RunTest script in the pcre directory. This runs pcretest
46	on each of the testinput files in turn, and compares the output with the
47	contents of the corresponding testoutput file. A file called testtry is used to
48	hold the output from pcretest (which is documented below).
49
50	To run pcretest on just one of the test files, give its number as an argument
51	to RunTest, for example:
52
53	RunTest 3
54
55	The first and third test files can also be fed directly into the perltest
56	program to check that Perl gives the same results. The third file requires the
57	additional features of release 5.005, which is why it is kept separate from the
58	main test input, which needs only Perl 5.004. In the long run, when 5.005 is
59	widespread, these two test files may get amalgamated.
60
61	The second set of tests check pcre_info(), pcre_study(), error detection and
62	run-time flags that are specific to PCRE, as well as the POSIX wrapper API.
63
64	To install PCRE, copy libpcre.a to any suitable library directory (e.g.
65	/usr/local/lib), pcre.h to any suitable include directory (e.g.
66	/usr/local/include), and pcre.3 to any suitable man directory (e.g.
67	/usr/local/man/man3).
68
69	To install the pgrep command, copy it to any suitable binary directory, (e.g.
70	/usr/local/bin) and pgrep.1 to any suitable man directory (e.g.
71	/usr/local/man/man1).
72
73	PCRE has its own native API, but a set of "wrapper" functions that are based on
74	the POSIX API are also supplied in the library libpcreposix.a. Note that this
75	just provides a POSIX calling interface to PCRE: the regular expressions
76	themselves still follow Perl syntax and semantics. The header file
77	for the POSIX-style functions is called pcreposix.h. The official POSIX name is
78	regex.h, but I didn't want to risk possible problems with existing files of
79	that name by distributing it that way. To use it with an existing program that
80	uses the POSIX API, it will have to be renamed or pointed at by a link.
81
82
83	Character tables
84	----------------
85
86	PCRE uses four tables for manipulating and identifying characters. These are
87	compiled from a source file called chartables.c. This is not supplied in
88	the distribution, but is built by the program maketables (compiled from
89	maketables.c), which uses the ANSI C character handling functions such as
90	isalnum(), isalpha(), isupper(), islower(), etc. to build the table sources.
91	This means that the default C locale set in your system may affect the contents
92	of the tables. You can change the tables by editing chartables.c and then
93	re-building PCRE. If you do this, you should probably also edit Makefile to
94	ensure that the file doesn't ever get re-generated.
95
96	The first two tables pcre_lcc[] and pcre_fcc[] provide lower casing and a
97	case flipping functions, respectively. The pcre_cbits[] table consists of four
98	32-byte bit maps which identify digits, letters, "word" characters, and white
99	space, respectively. These are used when building 32-byte bit maps that
100	represent character classes.
101
102	The pcre_ctypes[] table has bits indicating various character types, as
103	follows:
104
105	1 white space character
106	2 letter
107	4 decimal digit
108	8 hexadecimal digit
109	16 alphanumeric or '_'
110	128 regular expression metacharacter or binary zero
111
112	You should not alter the set of characters that contain the 128 bit, as that
113	will cause PCRE to malfunction.
114
115
116	The pcretest program
117	--------------------
118
119	This program is intended for testing PCRE, but it can also be used for
120	experimenting with regular expressions.
121
122	If it is given two filename arguments, it reads from the first and writes to
123	the second. If it is given only one filename argument, it reads from that file
124	and writes to stdout. Otherwise, it reads from stdin and writes to stdout, and
125	prompts for each line of input.
126
127	The program handles any number of sets of input on a single input file. Each
128	set starts with a regular expression, and continues with any number of data
129	lines to be matched against the pattern. An empty line signals the end of the
130	set. The regular expressions are given enclosed in any non-alphameric
131	delimiters, for example
132
133	/(a\|bc)x+yz/
134
135	and may be followed by i, m, s, or x to set the PCRE_CASELESS, PCRE_MULTILINE,
136	PCRE_DOTALL, or PCRE_EXTENDED options, respectively. These options have the
137	same effect as they do in Perl.
138
139	There are also some upper case options that do not match Perl options: /A, /E,
140	and /X set PCRE_ANCHORED, PCRE_DOLLAR_ENDONLY, and PCRE_EXTRA respectively.
141	The /D option is a PCRE debugging feature. It causes the internal form of
142	compiled regular expressions to be output after compilation. The /S option
143	causes pcre_study() to be called after the expression has been compiled, and
144	the results used when the expression is matched.
145
146	Finally, the /P option causes pcretest to call PCRE via the POSIX wrapper API
147	rather than its native API. When this is done, all other options except /i and
148	/m are ignored. REG_ICASE is set if /i is present, and REG_NEWLINE is set if /m
149	is present. The wrapper functions force PCRE_DOLLAR_ENDONLY always, and
150	PCRE_DOTALL unless REG_NEWLINE is set.
151
152	A regular expression can extend over several lines of input; the newlines are
153	included in it. See the testinput files for many examples.
154
155	Before each data line is passed to pcre_exec(), leading and trailing whitespace
156	is removed, and it is then scanned for \ escapes. The following are recognized:
157
158	\a alarm (= BEL)
159	\b backspace
160	\e escape
161	\f formfeed
162	\n newline
163	\r carriage return
164	\t tab
165	\v vertical tab
166	\nnn octal character (up to 3 octal digits)
167	\xhh hexadecimal character (up to 2 hex digits)
168
169	\A pass the PCRE_ANCHORED option to pcre_exec()
170	\B pass the PCRE_NOTBOL option to pcre_exec()
171	\Odd set the size of the output vector passed to pcre_exec() to dd
172	(any number of decimal digits)
173	\Z pass the PCRE_NOTEOL option to pcre_exec()
174
175	A backslash followed by anything else just escapes the anything else. If the
176	very last character is a backslash, it is ignored. This gives a way of passing
177	an empty line as data, since a real empty line terminates the data input.
178
179	If /P was present on the regex, causing the POSIX wrapper API to be used, only
180	\B, and \Z have any effect, causing REG_NOTBOL and REG_NOTEOL to be passed to
181	regexec() respectively.
182
183	When a match succeeds, pcretest outputs the list of identified substrings that
184	pcre_exec() returns, starting with number 0 for the string that matched the
185	whole pattern. Here is an example of an interactive pcretest run.
186
187	$ pcretest
188	Testing Perl-Compatible Regular Expressions
189	PCRE version 0.90 08-Sep-1997
190
191	re> /^abc(\d+)/
192	data> abc123
193	0: abc123
194	1: 123
195	data> xyz
196	No match
197
198	Note that while patterns can be continued over several lines (a plain ">"
199	prompt is used for continuations), data lines may not. However newlines can be
200	included in data by means of the \n escape.
201
202	If the -p option is given to pcretest, it is equivalent to adding /P to each
203	regular expression: the POSIX wrapper API is used to call PCRE. None of the
204	following flags has any effect in this case.
205
206	If the option -d is given to pcretest, it is equivalent to adding /D to each
207	regular expression: the internal form is output after compilation.
208
209	If the option -i (for "information") is given to pcretest, it calls pcre_info()
210	after compiling an expression, and outputs the information it gets back. If the
211	pattern is studied, the results of that are also output.
212
213	If the option -s is given to pcretest, it outputs the size of each compiled
214	pattern after it has been compiled.
215
216	If the -t option is given, each compile, study, and match is run 10000 times
217	while being timed, and the resulting time per compile or match is output in
218	milliseconds. Do not set -t with -s, because you will then get the size output
219	10000 times and the timing will be distorted. If you want to change the number
220	of repetitions used for timing, edit the definition of LOOPREPEAT at the top of
221	pcretest.c
222
223
224
225	The perltest program
226	--------------------
227
228	The perltest program tests Perl's regular expressions; it has the same
229	specification as pcretest, and so can be given identical input, except that
230	input patterns can be followed only by Perl's lower case options. The contents
231	of testinput and testinput3 meet this condition.
232
233	The data lines are processed as Perl strings, so if they contain $ or @
234	characters, these have to be escaped. For this reason, all such characters in
235	the testinput file are escaped so that it can be used for perltest as well as
236	for pcretest, and the special upper case options such as /A that pcretest
237	recognizes are not used in this file. The output should be identical, apart
238	from the initial identifying banner.
239
240	The testinput2 file is not suitable for feeding to Perltest, since it does
241	make use of the special upper case options and escapes that pcretest uses to
242	test some features of PCRE. It also contains malformed regular expressions, in
243	order to check that PCRE diagnoses them correctly.
244
245	Philip Hazel <ph10@cam.ac.uk>
246	September 1998