ViewVC logotype

Contents of /code/trunk/README

Parent Directory Parent Directory | Revision Log Revision Log

Revision 345 - (hide annotations) (download)
Mon Apr 28 15:10:02 2008 UTC (7 years ago) by ph10
File size: 34213 byte(s)
Tidies for the 7.7-RC1 distribution.

1 nigel 41 README file for PCRE (Perl-compatible regular expression library)
2     -----------------------------------------------------------------
3 nigel 3
4 nigel 43 The latest release of PCRE is always available from
6     ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-xxx.tar.gz
7 ph10 123
8 ph10 111 There is a mailing list for discussion about the development of PCRE at
9 nigel 43
10 ph10 123 pcre-dev@exim.org
12 nigel 41 Please read the NEWS file if you are upgrading from a previous release.
13 ph10 109 The contents of this README file are:
14 nigel 23
15 ph10 109 The PCRE APIs
16     Documentation for PCRE
17     Contributions by users of PCRE
18     Building PCRE on non-Unix systems
19 ph10 122 Building PCRE on Unix-like systems
20     Retrieving configuration information on Unix-like systems
21 ph10 109 Shared libraries on Unix-like systems
22 ph10 122 Cross-compiling on Unix-like systems
23 ph10 109 Using HP's ANSI C++ compiler (aCC)
24 ph10 111 Making new tarballs
25 ph10 109 Testing PCRE
26     Character tables
27     File manifest
28 nigel 35
29 ph10 109
30 nigel 77 The PCRE APIs
31     -------------
33 ph10 128 PCRE is written in C, and it has its own API. The distribution also includes a
34     set of C++ wrapper functions (see the pcrecpp man page for details), courtesy
35     of Google Inc.
36 nigel 77
37 ph10 128 In addition, there is a set of C wrapper functions that are based on the POSIX
38     regular expression API (see the pcreposix man page). These end up in the
39     library called libpcreposix. Note that this just provides a POSIX calling
40     interface to PCRE; the regular expressions themselves still follow Perl syntax
41     and semantics. The POSIX API is restricted, and does not give full access to
42     all of PCRE's facilities.
43 nigel 77
44 ph10 109 The header file for the POSIX-style functions is called pcreposix.h. The
45     official POSIX name is regex.h, but I did not want to risk possible problems
46     with existing files of that name by distributing it that way. To use PCRE with
47     an existing program that uses the POSIX API, pcreposix.h will have to be
48     renamed or pointed at by a link.
50 nigel 73 If you are using the POSIX interface to PCRE and there is already a POSIX regex
51 ph10 109 library installed on your system, as well as worrying about the regex.h header
52     file (as mentioned above), you must also take care when linking programs to
53 nigel 73 ensure that they link with PCRE's libpcreposix library. Otherwise they may pick
54 ph10 109 up the POSIX functions of the same name from the other library.
55 nigel 49
56 ph10 109 One way of avoiding this confusion is to compile PCRE with the addition of
57 ph10 122 -Dregcomp=PCREregcomp (and similarly for the other POSIX functions) to the
58     compiler flags (CFLAGS if you are using "configure" -- see below). This has the
59     effect of renaming the functions so that the names no longer clash. Of course,
60     you have to do the same thing for your applications, or write them using the
61     new names.
62 nigel 73
63 ph10 109
64 nigel 75 Documentation for PCRE
65     ----------------------
67 ph10 122 If you install PCRE in the normal way on a Unix-like system, you will end up
68     with a set of man pages whose names all start with "pcre". The one that is just
69     called "pcre" lists all the others. In addition to these man pages, the PCRE
70     documentation is supplied in two other forms:
71 nigel 75
72 ph10 109 1. There are files called doc/pcre.txt, doc/pcregrep.txt, and
73     doc/pcretest.txt in the source distribution. The first of these is a
74     concatenation of the text forms of all the section 3 man pages except
75     those that summarize individual functions. The other two are the text
76     forms of the section 1 man pages for the pcregrep and pcretest commands.
77     These text forms are provided for ease of scanning with text editors or
78 ph10 123 similar tools. They are installed in <prefix>/share/doc/pcre, where
79 ph10 111 <prefix> is the installation prefix (defaulting to /usr/local).
80 nigel 75
81 ph10 109 2. A set of files containing all the documentation in HTML form, hyperlinked
82 ph10 123 in various ways, and rooted in a file called index.html, is distributed in
83 ph10 122 doc/html and installed in <prefix>/share/doc/pcre/html.
84 nigel 75
86 nigel 53 Contributions by users of PCRE
87     ------------------------------
89     You can find contributions from PCRE users in the directory
91     ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/Contrib
93 ph10 122 There is a README file giving brief descriptions of what they are. Some are
94     complete in themselves; others are pointers to URLs containing relevant files.
95 ph10 128 Some of this material is likely to be well out-of-date. Several of the earlier
96     contributions provided support for compiling PCRE on various flavours of
97     Windows (I myself do not use Windows). Nowadays there is more Windows support
98     in the standard distribution, so these contibutions have been archived.
99 nigel 53
101 ph10 109 Building PCRE on non-Unix systems
102     ---------------------------------
103 ph10 101
104 ph10 122 For a non-Unix system, please read the comments in the file NON-UNIX-USE,
105     though if your system supports the use of "configure" and "make" you may be
106 ph10 260 able to build PCRE in the same way as for Unix-like systems. PCRE can also be
107     configured in many platform environments using the GUI facility of CMake's
108     CMakeSetup. It creates Makefiles, solution files, etc.
109 ph10 101
110 ph10 109 PCRE has been compiled on many different operating systems. It should be
111     straightforward to build PCRE on any system that has a Standard C compiler and
112     library, because it uses only Standard C functions.
113 ph10 101
115 ph10 122 Building PCRE on Unix-like systems
116     ----------------------------------
117 nigel 3
118 nigel 87 If you are using HP's ANSI C++ compiler (aCC), please see the special note
119     in the section entitled "Using HP's ANSI C++ compiler (aCC)" below.
121 ph10 145 The following instructions assume the use of the widely used "configure, make,
122 ph10 317 make install" process. There is also support for CMake in the PCRE
123     distribution; there are some comments about using CMake in the NON-UNIX-USE
124     file, though it can also be used in Unix-like systems.
125 ph10 144
126 nigel 63 To build PCRE on a Unix-like system, first run the "configure" command from the
127     PCRE distribution directory, with your current directory set to the directory
128     where you want the files to be created. This command is a standard GNU
129     "autoconf" configuration script, for which generic instructions are supplied in
130 ph10 122 the file INSTALL.
131 nigel 3
132 nigel 53 Most commonly, people build PCRE within its own distribution directory, and in
133 ph10 109 this case, on many systems, just running "./configure" is sufficient. However,
134     the usual methods of changing standard defaults are available. For example:
135 nigel 53
136 nigel 41 CFLAGS='-O2 -Wall' ./configure --prefix=/opt/local
138     specifies that the C compiler should be run with the flags '-O2 -Wall' instead
139     of the default, and that "make install" should install PCRE under /opt/local
140 nigel 49 instead of the default /usr/local.
141 nigel 41
142 nigel 53 If you want to build in a different directory, just run "configure" with that
143     directory as current. For example, suppose you have unpacked the PCRE source
144     into /source/pcre/pcre-xxx, but you want to build it in /build/pcre/pcre-xxx:
146     cd /build/pcre/pcre-xxx
147     /source/pcre/pcre-xxx/configure
149 nigel 87 PCRE is written in C and is normally compiled as a C library. However, it is
150     possible to build it as a C++ library, though the provided building apparatus
151     does not have any features to support this.
153 nigel 63 There are some optional features that can be included or omitted from the PCRE
154     library. You can read more about them in the pcrebuild man page.
155 nigel 49
156 nigel 83 . If you want to suppress the building of the C++ wrapper library, you can add
157     --disable-cpp to the "configure" command. Otherwise, when "configure" is run,
158 ph10 128 it will try to find a C++ compiler and C++ header files, and if it succeeds,
159     it will try to build the C++ wrapper.
160 nigel 83
161 nigel 63 . If you want to make use of the support for UTF-8 character strings in PCRE,
162     you must add --enable-utf8 to the "configure" command. Without it, the code
163     for handling UTF-8 is not included in the library. (Even when included, it
164     still has to be enabled by an option at run time.)
166 nigel 75 . If, in addition to support for UTF-8 character strings, you want to include
167     support for the \P, \p, and \X sequences that recognize Unicode character
168     properties, you must add --enable-unicode-properties to the "configure"
169 nigel 91 command. This adds about 30K to the size of the library (in the form of a
170 nigel 75 property table); only the basic two-letter properties such as Lu are
171     supported.
173 nigel 93 . You can build PCRE to recognize either CR or LF or the sequence CRLF or any
174 ph10 149 of the preceding, or any of the Unicode newline sequences as indicating the
175     end of a line. Whatever you specify at build time is the default; the caller
176     of PCRE can change the selection at run time. The default newline indicator
177     is a single LF character (the Unix standard). You can specify the default
178     newline indicator by adding --enable-newline-is-cr or --enable-newline-is-lf
179     or --enable-newline-is-crlf or --enable-newline-is-anycrlf or
180     --enable-newline-is-any to the "configure" command, respectively.
181 ph10 109
182 ph10 149 If you specify --enable-newline-is-cr or --enable-newline-is-crlf, some of
183     the standard tests will fail, because the lines in the test files end with
184     LF. Even if the files are edited to change the line endings, there are likely
185     to be some failures. With --enable-newline-is-anycrlf or
186     --enable-newline-is-any, many tests should succeed, but there may be some
187     failures.
188 ph10 254
189     . By default, the sequence \R in a pattern matches any Unicode line ending
190     sequence. This is independent of the option specifying what PCRE considers to
191 ph10 251 be the end of a line (see above). However, the caller of PCRE can restrict \R
192     to match only CR, LF, or CRLF. You can make this the default by adding
193     --enable-bsr-anycrlf to the "configure" command (bsr = "backslash R").
194 nigel 63
195     . When called via the POSIX interface, PCRE uses malloc() to get additional
196     storage for processing capturing parentheses if there are more than 10 of
197 ph10 128 them in a pattern. You can increase this threshold by setting, for example,
198 nigel 63
199     --with-posix-malloc-threshold=20
201     on the "configure" command.
203 nigel 77 . PCRE has a counter that can be set to limit the amount of resources it uses.
204 nigel 63 If the limit is exceeded during a match, the match fails. The default is ten
205     million. You can change the default by setting, for example,
207     --with-match-limit=500000
209     on the "configure" command. This is just the default; individual calls to
210 ph10 122 pcre_exec() can supply their own value. There is more discussion on the
211     pcreapi man page.
212 nigel 63
213 nigel 91 . There is a separate counter that limits the depth of recursive function calls
214     during a matching process. This also has a default of ten million, which is
215     essentially "unlimited". You can change the default by setting, for example,
217     --with-match-limit-recursion=500000
219     Recursive function calls use up the runtime stack; running out of stack can
220     cause programs to crash in strange ways. There is a discussion about stack
221     sizes in the pcrestack man page.
223 nigel 63 . The default maximum compiled pattern size is around 64K. You can increase
224     this by adding --with-link-size=3 to the "configure" command. You can
225     increase it even more by setting --with-link-size=4, but this is unlikely
226 ph10 128 ever to be necessary. Increasing the internal link size will reduce
227     performance.
228 nigel 63
229 nigel 77 . You can build PCRE so that its internal match() function that is called from
230 ph10 122 pcre_exec() does not call itself recursively. Instead, it uses memory blocks
231     obtained from the heap via the special functions pcre_stack_malloc() and
232     pcre_stack_free() to save data that would otherwise be saved on the stack. To
233     build PCRE like this, use
234 nigel 73
235     --disable-stack-for-recursion
237     on the "configure" command. PCRE runs more slowly in this mode, but it may be
238 nigel 77 necessary in environments with limited stack sizes. This applies only to the
239     pcre_exec() function; it does not apply to pcre_dfa_exec(), which does not
240 ph10 122 use deeply nested recursion. There is a discussion about stack sizes in the
241     pcrestack man page.
242 nigel 73
243 ph10 128 . For speed, PCRE uses four tables for manipulating and identifying characters
244     whose code point values are less than 256. By default, it uses a set of
245     tables for ASCII encoding that is part of the distribution. If you specify
247     --enable-rebuild-chartables
249     a program called dftables is compiled and run in the default C locale when
250     you obey "make". It builds a source file called pcre_chartables.c. If you do
251     not specify this option, pcre_chartables.c is created as a copy of
252     pcre_chartables.c.dist. See "Character tables" below for further information.
254     . It is possible to compile PCRE for use on systems that use EBCDIC as their
255     default character code (as opposed to ASCII) by specifying
257     --enable-ebcdic
259     This automatically implies --enable-rebuild-chartables (see above).
261 ph10 289 . It is possible to compile pcregrep to use libz and/or libbz2, in order to
262 ph10 287 read .gz and .bz2 files (respectively), by specifying one or both of
263 ph10 286
264     --enable-pcregrep-libz
265     --enable-pcregrep-libbz2
266 ph10 289
267 ph10 287 Of course, the relevant libraries must be installed on your system.
268 ph10 289
269     . It is possible to compile pcretest so that it links with the libreadline
270 ph10 287 library, by specifying
271 ph10 289
272     --enable-pcretest-libreadline
274 ph10 287 If this is done, when pcretest's input is from a terminal, it reads it using
275     the readline() function. This provides line-editing and history facilities.
276     Note that libreadline is GPL-licenced, so if you distribute a binary of
277     pcretest linked in this way, there may be licensing issues.
278 ph10 345
279     Setting this option causes the -lreadline option to be added to the pcretest
280 ph10 338 build. In many operating environments with a sytem-installed readline
281     library this is sufficient. However, in some environments (e.g. if an
282     unmodified distribution version of readline is in use), it may be necessary
283     to specify something like LIBS="-lncurses" as well. This is because, to quote
284     the readline INSTALL, "Readline uses the termcap functions, but does not link
285     with the termcap or curses library itself, allowing applications which link
286     with readline the to choose an appropriate library."
287 ph10 286
288 ph10 109 The "configure" script builds the following files for the basic C library:
289 nigel 49
290 nigel 77 . Makefile is the makefile that builds the library
291     . config.h contains build-time configuration options for the library
292 ph10 109 . pcre.h is the public PCRE header file
293 nigel 77 . pcre-config is a script that shows the settings of "configure" options
294     . libpcre.pc is data for the pkg-config command
295 nigel 75 . libtool is a script that builds shared and/or static libraries
296 ph10 109 . RunTest is a script for running tests on the basic C library
297 nigel 77 . RunGrepTest is a script for running tests on the pcregrep command
298 nigel 41
299 ph10 123 Versions of config.h and pcre.h are distributed in the PCRE tarballs under
300 ph10 122 the names config.h.generic and pcre.h.generic. These are provided for the
301     benefit of those who have to built PCRE without the benefit of "configure". If
302     you use "configure", the .generic versions are not used.
303 nigel 77
304 ph10 109 If a C++ compiler is found, the following files are also built:
306     . libpcrecpp.pc is data for the pkg-config command
307     . pcrecpparg.h is a header file for programs that call PCRE via the C++ wrapper
308 nigel 77 . pcre_stringpiece.h is the header for the C++ "stringpiece" functions
310     The "configure" script also creates config.status, which is an executable
311     script that can be run to recreate the configuration, and config.log, which
312     contains compiler output from tests that "configure" runs.
314     Once "configure" has run, you can run "make". It builds two libraries, called
315 ph10 312 libpcre and libpcreposix, a test program called pcretest, and the pcregrep
316     command. If a C++ compiler was found on your system, "make" also builds the C++
317     wrapper library, which is called libpcrecpp, and some test programs called
318     pcrecpp_unittest, pcre_scanner_unittest, and pcre_stringpiece_unittest.
319     Building the C++ wrapper can be disabled by adding --disable-cpp to the
320     "configure" command.
321 nigel 3
322 ph10 109 The command "make check" runs all the appropriate tests. Details of the PCRE
323     tests are given below in a separate section of this document.
324 nigel 75
325 ph10 109 You can use "make install" to install PCRE into live directories on your
326     system. The following are installed (file names are all relative to the
327     <prefix> that is set when "configure" is run):
328 nigel 77
329 ph10 109 Commands (bin):
330     pcretest
331     pcregrep
332 ph10 111 pcre-config
333 ph10 109
334     Libraries (lib):
335     libpcre
336     libpcreposix
337     libpcrecpp (if C++ support is enabled)
339     Configuration information (lib/pkgconfig):
340     libpcre.pc
341 ph10 122 libpcrecpp.pc (if C++ support is enabled)
342 ph10 109
343     Header files (include):
344     pcre.h
345     pcreposix.h
346     pcre_scanner.h )
347     pcre_stringpiece.h ) if C++ support is enabled
348     pcrecpp.h )
349     pcrecpparg.h )
351     Man pages (share/man/man{1,3}):
352     pcregrep.1
353     pcretest.1
354     pcre.3
355     pcre*.3 (lots more pages, all starting "pcre")
357     HTML documentation (share/doc/pcre/html):
358     index.html
359     *.html (lots more pages, hyperlinked from index.html)
361     Text file documentation (share/doc/pcre):
362     AUTHORS
363     COPYING
364     ChangeLog
365     LICENCE
366     NEWS
367     README
368     pcre.txt (a concatenation of the man(3) pages)
369     pcretest.txt the pcretest man page
370     pcregrep.txt the pcregrep man page
372 nigel 77 If you want to remove PCRE from your system, you can run "make uninstall".
373     This removes all the files that "make install" installed. However, it does not
374     remove any directories, because these are often shared with other programs.
377 ph10 122 Retrieving configuration information on Unix-like systems
378     ---------------------------------------------------------
379 nigel 75
380 ph10 109 Running "make install" installs the command pcre-config, which can be used to
381     recall information about the PCRE configuration and installation. For example:
382 nigel 37
383 nigel 43 pcre-config --version
385     prints the version number, and
387 nigel 75 pcre-config --libs
388 nigel 43
389     outputs information about where the library is installed. This command can be
390     included in makefiles for programs that use PCRE, saving the programmer from
391     having to remember too many details.
393 nigel 75 The pkg-config command is another system for saving and retrieving information
394     about installed libraries. Instead of separate commands for each library, a
395     single command is used. For example:
396 nigel 43
397 nigel 75 pkg-config --cflags pcre
399     The data is held in *.pc files that are installed in a directory called
400 ph10 109 <prefix>/lib/pkgconfig.
401 nigel 75
403 nigel 63 Shared libraries on Unix-like systems
404     -------------------------------------
405 nigel 53
406 nigel 77 The default distribution builds PCRE as shared libraries and static libraries,
407     as long as the operating system supports shared libraries. Shared library
408     support relies on the "libtool" script which is built as part of the
409 nigel 53 "configure" process.
410 nigel 39
411 nigel 53 The libtool script is used to compile and link both shared and static
412     libraries. They are placed in a subdirectory called .libs when they are newly
413     built. The programs pcretest and pcregrep are built to use these uninstalled
414     libraries (by means of wrapper scripts in the case of shared libraries). When
415     you use "make install" to install shared libraries, pcregrep and pcretest are
416     automatically re-built to use the newly installed shared libraries before being
417 ph10 122 installed themselves. However, the versions left in the build directory still
418 nigel 53 use the uninstalled libraries.
420     To build PCRE using static libraries only you must use --disable-shared when
421 nigel 75 configuring it. For example:
422 nigel 3
423 nigel 43 ./configure --prefix=/usr/gnu --disable-shared
424 nigel 41
425 nigel 53 Then run "make" in the usual way. Similarly, you can use --disable-static to
426     build only shared libraries.
427 nigel 41
428 nigel 43
429 ph10 122 Cross-compiling on Unix-like systems
430     ------------------------------------
431 nigel 63
432     You can specify CC and CFLAGS in the normal way to the "configure" command, in
433 ph10 128 order to cross-compile PCRE for some other host. However, you should NOT
434     specify --enable-rebuild-chartables, because if you do, the dftables.c source
435     file is compiled and run on the local host, in order to generate the inbuilt
436     character tables (the pcre_chartables.c file). This will probably not work,
437     because dftables.c needs to be compiled with the local compiler, not the cross
438     compiler.
439 nigel 63
440 ph10 128 When --enable-rebuild-chartables is not specified, pcre_chartables.c is created
441     by making a copy of pcre_chartables.c.dist, which is a default set of tables
442     that assumes ASCII code. Cross-compiling with the default tables should not be
443     a problem.
444 nigel 63
445 ph10 128 If you need to modify the character tables when cross-compiling, you should
446     move pcre_chartables.c.dist out of the way, then compile dftables.c by hand and
447     run it on the local host to make a new version of pcre_chartables.c.dist.
448     Then when you cross-compile PCRE this new version of the tables will be used.
451 nigel 87 Using HP's ANSI C++ compiler (aCC)
452     ----------------------------------
454 nigel 93 Unless C++ support is disabled by specifying the "--disable-cpp" option of the
455 ph10 122 "configure" script, you must include the "-AA" option in the CXXFLAGS
456 nigel 87 environment variable in order for the C++ components to compile correctly.
458     Also, note that the aCC compiler on PA-RISC platforms may have a defect whereby
459     needed libraries fail to get included when specifying the "-AA" compiler
460     option. If you experience unresolved symbols when linking the C++ programs,
461     use the workaround of specifying the following environment variable prior to
462     running the "configure" script:
464     CXXLDFLAGS="-lstd_v2 -lCsup_v2"
466 ph10 123
467 ph10 111 Making new tarballs
468     -------------------
469 nigel 87
470 ph10 123 The command "make dist" creates three PCRE tarballs, in tar.gz, tar.bz2, and
471 ph10 155 zip formats. The command "make distcheck" does the same, but then does a trial
472     build of the new distribution to ensure that it works.
473 ph10 111
474 ph10 155 If you have modified any of the man page sources in the doc directory, you
475     should first run the PrepareRelease script before making a distribution. This
476     script creates the .txt and HTML forms of the documentation from the man pages.
477 ph10 111
478 ph10 155
479 nigel 41 Testing PCRE
480     ------------
482 ph10 122 To test the basic PCRE library on a Unix system, run the RunTest script that is
483     created by the configuring process. There is also a script called RunGrepTest
484     that tests the options of the pcregrep command. If the C++ wrapper library is
485     built, three test programs called pcrecpp_unittest, pcre_scanner_unittest, and
486 ph10 109 pcre_stringpiece_unittest are also built.
487 nigel 41
488 ph10 109 Both the scripts and all the program tests are run if you obey "make check" or
489     "make test". For other systems, see the instructions in NON-UNIX-USE.
490 nigel 77
491     The RunTest script runs the pcretest test program (which is documented in its
492 ph10 122 own man page) on each of the testinput files in the testdata directory in
493 nigel 77 turn, and compares the output with the contents of the corresponding testoutput
494 nigel 93 files. A file called testtry is used to hold the main output from pcretest
495 nigel 75 (testsavedregex is also used as a working file). To run pcretest on just one of
496     the test files, give its number as an argument to RunTest, for example:
497 nigel 41
498 nigel 63 RunTest 2
499 nigel 3
500 ph10 109 The first test file can also be fed directly into the perltest.pl script to
501     check that Perl gives the same results. The only difference you should see is
502     in the first few lines, where the Perl version is given instead of the PCRE
503     version.
504 nigel 3
505 nigel 49 The second set of tests check pcre_fullinfo(), pcre_info(), pcre_study(),
506     pcre_copy_substring(), pcre_get_substring(), pcre_get_substring_list(), error
507     detection, and run-time flags that are specific to PCRE, as well as the POSIX
508 ph10 122 wrapper API. It also uses the debugging flags to check some of the internals of
509 nigel 49 pcre_compile().
510 nigel 7
511 nigel 49 If you build PCRE with a locale setting that is not the standard C locale, the
512     character tables may be different (see next paragraph). In some cases, this may
513     cause failures in the second set of tests. For example, in a locale where the
514     isprint() function yields TRUE for characters in the range 128-255, the use of
515     [:isascii:] inside a character class defines a different set of characters, and
516     this shows up in this test as a difference in the compiled code, which is being
517     listed for checking. Where the comparison test output contains [\x00-\x7f] the
518     test will contain [\x00-\xff], and similarly in some other cases. This is not a
519     bug in PCRE.
521 nigel 63 The third set of tests checks pcre_maketables(), the facility for building a
522 nigel 25 set of character tables for a specific locale and using them instead of the
523 nigel 73 default tables. The tests make use of the "fr_FR" (French) locale. Before
524     running the test, the script checks for the presence of this locale by running
525     the "locale" command. If that command fails, or if it doesn't include "fr_FR"
526     in the list of available locales, the third test cannot be run, and a comment
527     is output to say why. If running this test produces instances of the error
528 nigel 25
529 nigel 73 ** Failed to set locale "fr_FR"
530 nigel 25
531     in the comparison output, it means that locale is not available on your system,
532     despite being listed by "locale". This does not mean that PCRE is broken.
534 ph10 142 [If you are trying to run this test on Windows, you may be able to get it to
535 ph10 260 work by changing "fr_FR" to "french" everywhere it occurs. Alternatively, use
536     RunTest.bat. The version of RunTest.bat included with PCRE 7.4 and above uses
537     Windows versions of test 2. More info on using RunTest.bat is included in the
538     document entitled NON-UNIX-USE.]
539 ph10 139
540 nigel 63 The fourth test checks the UTF-8 support. It is not run automatically unless
541     PCRE is built with UTF-8 support. To do this you must set --enable-utf8 when
542     running "configure". This file can be also fed directly to the perltest script,
543     provided you are running Perl 5.8 or higher. (For Perl 5.6, a small patch,
544     commented in the script, can be be used.)
545 nigel 3
546 nigel 75 The fifth test checks error handling with UTF-8 encoding, and internal UTF-8
547     features of PCRE that are not relevant to Perl.
548 nigel 3
549 ph10 122 The sixth test checks the support for Unicode character properties. It it not
550     run automatically unless PCRE is built with Unicode property support. To to
551 nigel 77 this you must set --enable-unicode-properties when running "configure".
552 nigel 63
553 nigel 77 The seventh, eighth, and ninth tests check the pcre_dfa_exec() alternative
554     matching function, in non-UTF-8 mode, UTF-8 mode, and UTF-8 mode with Unicode
555     property support, respectively. The eighth and ninth tests are not run
556     automatically unless PCRE is build with the relevant support.
557 nigel 75
558 nigel 77
559 nigel 3 Character tables
560     ----------------
562 ph10 122 For speed, PCRE uses four tables for manipulating and identifying characters
563     whose code point values are less than 256. The final argument of the
564     pcre_compile() function is a pointer to a block of memory containing the
565     concatenated tables. A call to pcre_maketables() can be used to generate a set
566     of tables in the current locale. If the final argument for pcre_compile() is
567     passed as NULL, a set of default tables that is built into the binary is used.
568 nigel 3
569 ph10 128 The source file called pcre_chartables.c contains the default set of tables. By
570     default, this is created as a copy of pcre_chartables.c.dist, which contains
571     tables for ASCII coding. However, if --enable-rebuild-chartables is specified
572     for ./configure, a different version of pcre_chartables.c is built by the
573     program dftables (compiled from dftables.c), which uses the ANSI C character
574     handling functions such as isalnum(), isalpha(), isupper(), islower(), etc. to
575     build the table sources. This means that the default C locale which is set for
576     your system will control the contents of these default tables. You can change
577     the default tables by editing pcre_chartables.c and then re-building PCRE. If
578     you do this, you should take care to ensure that the file does not get
579     automatically re-generated. The best way to do this is to move
580     pcre_chartables.c.dist out of the way and replace it with your customized
581     tables.
582 nigel 3
583 ph10 128 When the dftables program is run as a result of --enable-rebuild-chartables,
584     it uses the default C locale that is set on your system. It does not pay
585     attention to the LC_xxx environment variables. In other words, it uses the
586     system's default locale rather than whatever the compiling user happens to have
587     set. If you really do want to build a source set of character tables in a
588     locale that is specified by the LC_xxx variables, you can run the dftables
589     program by hand with the -L option. For example:
591     ./dftables -L pcre_chartables.c.special
593 nigel 25 The first two 256-byte tables provide lower casing and case flipping functions,
594     respectively. The next table consists of three 32-byte bit maps which identify
595     digits, "word" characters, and white space, respectively. These are used when
596 ph10 111 building 32-byte bit maps that represent character classes for code points less
597 ph10 109 than 256.
598 nigel 25
599     The final 256-byte table has bits indicating various character types, as
600 nigel 3 follows:
602     1 white space character
603     2 letter
604     4 decimal digit
605     8 hexadecimal digit
606     16 alphanumeric or '_'
607     128 regular expression metacharacter or binary zero
609     You should not alter the set of characters that contain the 128 bit, as that
610     will cause PCRE to malfunction.
613 ph10 109 File manifest
614     -------------
615 nigel 3
616 nigel 41 The distribution should contain the following files:
617 nigel 3
618 ph10 109 (A) Source files of the PCRE library functions and their headers:
619 nigel 3
620 ph10 128 dftables.c auxiliary program for building pcre_chartables.c
621     when --enable-rebuild-chartables is specified
622 ph10 111
623 ph10 128 pcre_chartables.c.dist a default set of character tables that assume ASCII
624     coding; used, unless --enable-rebuild-chartables is
625     specified, by copying to pcre_chartables.c
626 ph10 111
627 ph10 128 pcreposix.c )
628     pcre_compile.c )
629     pcre_config.c )
630     pcre_dfa_exec.c )
631     pcre_exec.c )
632     pcre_fullinfo.c )
633     pcre_get.c ) sources for the functions in the library,
634     pcre_globals.c ) and some internal functions that they use
635     pcre_info.c )
636     pcre_maketables.c )
637     pcre_newline.c )
638     pcre_ord2utf8.c )
639     pcre_refcount.c )
640     pcre_study.c )
641     pcre_tables.c )
642     pcre_try_flipped.c )
643     pcre_ucp_searchfuncs.c )
644     pcre_valid_utf8.c )
645     pcre_version.c )
646     pcre_xclass.c )
647     pcre_printint.src ) debugging function that is #included in pcretest,
648     ) and can also be #included in pcre_compile()
649     pcre.h.in template for pcre.h when built by "configure"
650     pcreposix.h header for the external POSIX wrapper API
651     pcre_internal.h header for internal use
652     ucp.h ) headers concerned with
653     ucpinternal.h ) Unicode property handling
654     ucptable.h ) (this one is the data table)
655 ph10 111
656 ph10 128 config.h.in template for config.h, which is built by "configure"
657 ph10 111
658 ph10 128 pcrecpp.h public header file for the C++ wrapper
659     pcrecpparg.h.in template for another C++ header file
660     pcre_scanner.h public header file for C++ scanner functions
661     pcrecpp.cc )
662     pcre_scanner.cc ) source for the C++ wrapper library
663 ph10 111
664 ph10 128 pcre_stringpiece.h.in template for pcre_stringpiece.h, the header for the
665     C++ stringpiece functions
666     pcre_stringpiece.cc source for the C++ stringpiece functions
668 ph10 109 (B) Source files for programs that use PCRE:
669 nigel 75
670 ph10 128 pcredemo.c simple demonstration of coding calls to PCRE
671     pcregrep.c source of a grep utility that uses PCRE
672     pcretest.c comprehensive test program
673 ph10 111
674     (C) Auxiliary files:
676 ph10 128 132html script to turn "man" pages into HTML
677     AUTHORS information about the author of PCRE
678     ChangeLog log of changes to the code
679     CleanTxt script to clean nroff output for txt man pages
680     Detrail script to remove trailing spaces
681     HACKING some notes about the internals of PCRE
682     INSTALL generic installation instructions
683     LICENCE conditions for the use of PCRE
684     COPYING the same, using GNU's standard name
685     Makefile.in ) template for Unix Makefile, which is built by
686     ) "configure"
687     Makefile.am ) the automake input that was used to create
688     ) Makefile.in
689     NEWS important changes in this release
690     NON-UNIX-USE notes on building PCRE on non-Unix systems
691     PrepareRelease script to make preparations for "make dist"
692     README this file
693 ph10 138 RunTest a Unix shell script for running tests
694     RunGrepTest a Unix shell script for pcregrep tests
695 ph10 128 aclocal.m4 m4 macros (generated by "aclocal")
696     config.guess ) files used by libtool,
697     config.sub ) used only when building a shared library
698     configure a configuring shell script (built by autoconf)
699     configure.ac ) the autoconf input that was used to build
700     ) "configure" and config.h
701     depcomp ) script to find program dependencies, generated by
702     ) automake
703     doc/*.3 man page sources for the PCRE functions
704     doc/*.1 man page sources for pcregrep and pcretest
705     doc/index.html.src the base HTML page
706     doc/html/* HTML documentation
707     doc/pcre.txt plain text version of the man pages
708     doc/pcretest.txt plain text documentation of test program
709     doc/perltest.txt plain text documentation of Perl test program
710     install-sh a shell script for installing files
711     libpcre.pc.in template for libpcre.pc for pkg-config
712     libpcrecpp.pc.in template for libpcrecpp.pc for pkg-config
713     ltmain.sh file used to build a libtool script
714     missing ) common stub for a few missing GNU programs while
715     ) installing, generated by automake
716     mkinstalldirs script for making install directories
717     perltest.pl Perl test program
718     pcre-config.in source of script which retains PCRE information
719 ph10 111 pcrecpp_unittest.cc )
720     pcre_scanner_unittest.cc ) test programs for the C++ wrapper
721     pcre_stringpiece_unittest.cc )
722 ph10 128 testdata/testinput* test data for main library tests
723     testdata/testoutput* expected test results
724     testdata/grep* input and output for pcregrep tests
725 ph10 111
726 ph10 109 (D) Auxiliary files for cmake support
727 nigel 3
728 ph10 109 CMakeLists.txt
729 ph10 111 config-cmake.h.in
730 nigel 29
731 ph10 109 (E) Auxiliary files for VPASCAL
732 nigel 29
733 nigel 63 makevp.bat
734 ph10 135 makevp_c.txt
735     makevp_l.txt
736 ph10 111 pcregexp.pas
738     (F) Auxiliary files for building PCRE "by hand"
740 ph10 128 pcre.h.generic ) a version of the public PCRE header file
741     ) for use in non-"configure" environments
742     config.h.generic ) a version of config.h for use in non-"configure"
743     ) environments
744 ph10 111
745 ph10 109 (F) Miscellaneous
746 nigel 63
747 ph10 109 RunTest.bat a script for running tests under Windows
749 nigel 77 Philip Hazel
750     Email local part: ph10
751     Email domain: cam.ac.uk
752 ph10 338 Last updated: 13 April 2008


Name Value
svn:eol-style native
svn:keywords "Author Date Id Revision Url"

ViewVC Help
Powered by ViewVC 1.1.12