code/trunk/Makefile.in


# Makefile.in for PCRE (Perl-Compatible Regular Expression) library.

#---------------------------------------------------------------------------#
# To build mingw32 DLL uncomment the next two lines. This addition for      #
# mingw32 was contributed by <Paul.Sokolovsky@technologist.com>. I (Philip  #
# Hazel) don't know anything about it! There are some additional targets at #
# the bottom of this Makefile.                                              #
#---------------------------------------------------------------------------#
#
# include dll.mk
# DLL_LDFLAGS=-s


#---------------------------------------------------------------------------#
# The next few lines are modified by "configure" to insert data that it is  #
# given in its arguments, or which it finds out for itself.                 #
#---------------------------------------------------------------------------#

# BINDIR is the directory in which the pgrep command is installed.
# INCDIR is the directory in which the public header file pcre.h is installed.
# LIBDIR is the directory in which the libraries are installed.
# MANDIR is the directory in which the man pages are installed.
# The pcretest program, as it is a test program, does not get installed
# anywhere.

prefix = @prefix@
exec_prefix = @exec_prefix@

BINDIR = @bindir@
LIBDIR = @libdir@
INCDIR = @includedir@
MANDIR = @mandir@

CC = @CC@
CFLAGS = @CFLAGS@
RANLIB = @RANLIB@

# LIBTOOL defaults to "", which cuts out the building of shared libraries.
# If "configure" is called with --enable-shared-libraries, then LIBTOOL is
# set to "./libtool", which causes shared libraries to be built, and LIBSUFFIX
# is set to "la" instead of "a", which causes the shared libraries to be
# installed.

LIBTOOL = @LIBTOOL@
LIBSUFFIX = @LIBSUFFIX@

# These are the version numbers for the shared libraries

PCRELIBVERSION = @PCRE_LIB_VERSION@
PCREPOSIXLIBVERSION = @PCRE_POSIXLIB_VERSION@


#---------------------------------------------------------------------------#
# A copy of install-sh is in this distribution and is used by default.      #
#---------------------------------------------------------------------------#

INSTALL = ./install-sh -c
INSTALL_DATA = ${INSTALL} -m 644


#---------------------------------------------------------------------------#
# For almost all systems, the command to create a library is "ar cq", but   #
# there is at least one where it is different, to make this configurable.   #
# However, I haven't got round to learning how to make "configure" find     #
# this out for itself. It is necessary to use a command such as             #
# "make AR='ar -rc'" if you need to vary this.                              #
#---------------------------------------------------------------------------#

AR = ar cq


##############################################################################


OBJ = maketables.o get.o study.o pcre.o
LOBJ = maketables.lo get.lo study.lo pcre.lo

all:            libtool libpcre.$(LIBSUFFIX) libpcreposix.$(LIBSUFFIX) pcretest pgrep

libtool:        config.guess config.sub ltconfig ltmain.sh
                @if test "$(LIBTOOL)" = "./libtool"; then \
                  echo '--- Building libtool ---'; \
                  ./ltconfig ./ltmain.sh; \
                  echo '--- Built libtool ---'; fi

pgrep:          libpcre.$(LIBSUFFIX) pgrep.o
                  @echo ' '
                  @echo '--- Building pgrep utility'
                  @echo ' '
                $(LIBTOOL) $(CC) $(CFLAGS) -o pgrep pgrep.o libpcre.$(LIBSUFFIX)

pcretest:       libpcre.$(LIBSUFFIX) libpcreposix.$(LIBSUFFIX) pcretest.o
                  @echo ' '
                  @echo '--- Building pcretest testing program'
                  @echo ' '
                $(LIBTOOL) $(PURIFY) $(CC) $(CFLAGS) -o pcretest pcretest.o \
                  libpcre.$(LIBSUFFIX) libpcreposix.$(LIBSUFFIX)

libpcre.a:      $(OBJ)
                @echo ' '
                @echo '--- Building static library: libpcre'
                @echo ' '
                -rm -f libpcre.a
                $(AR) libpcre.a $(OBJ)
                $(RANLIB) libpcre.a

libpcre.la:     $(OBJ)
                @echo ' '
                @echo '--- Building shared library: libpcre'
                @echo ' '
                -rm -f libpcre.la
                ./libtool $(CC) -version-info '$(PCRELIBVERSION)' -o libpcre.la -rpath $(LIBDIR) $(LOBJ)

libpcreposix.a: pcreposix.o
                @echo ' '
                @echo '--- Building static library: libpcreposix'
                @echo ' '
                -rm -f libpcreposix.a
                $(AR) libpcreposix.a pcreposix.o
                $(RANLIB) libpcreposix.a

libpcreposix.la: pcreposix.o
                @echo ' '
                @echo '--- Building shared library: libpcreposix'
                @echo ' '
                -rm -f libpcreposix.la
                ./libtool $(CC) -version-info '$(PCREPOSIXLIBVERSION)' -o libpcreposix.la -rpath $(LIBDIR) pcreposix.lo

pcre.o:         chartables.c pcre.c pcre.h internal.h config.h Makefile
                $(LIBTOOL) $(CC) -c $(CFLAGS) pcre.c

pcreposix.o:    pcreposix.c pcreposix.h internal.h pcre.h config.h Makefile
                $(LIBTOOL) $(CC) -c $(CFLAGS) pcreposix.c

maketables.o:   maketables.c pcre.h internal.h config.h Makefile
                $(LIBTOOL) $(CC) -c $(CFLAGS) maketables.c

get.o:          get.c pcre.h internal.h config.h Makefile
                $(LIBTOOL) $(CC) -c $(CFLAGS) get.c

study.o:        study.c pcre.h internal.h config.h Makefile
                $(LIBTOOL) $(CC) -c $(CFLAGS) study.c

pcretest.o:     pcretest.c pcre.h config.h Makefile
                $(CC) -c $(CFLAGS) pcretest.c

pgrep.o:        pgrep.c pcre.h Makefile config.h
                $(CC) -c $(CFLAGS) pgrep.c

# An auxiliary program makes the default character table source

chartables.c:   dftables
                ./dftables >chartables.c

dftables:       dftables.c maketables.c pcre.h internal.h config.h Makefile
                $(CC) -o dftables $(CFLAGS) dftables.c

install:        all
                $(LIBTOOL) $(INSTALL_DATA) libpcre.$(LIBSUFFIX) $(LIBDIR)/libpcre.$(LIBSUFFIX)
                $(LIBTOOL) $(INSTALL_DATA) libpcreposix.$(LIBSUFFIX) $(LIBDIR)/libpcreposix.$(LIBSUFFIX)
                $(INSTALL_DATA) pcre.h $(INCDIR)/pcre.h
                $(INSTALL_DATA) pcreposix.h $(INCDIR)/pcreposix.h
                $(INSTALL_DATA) doc/pcre.3 $(MANDIR)/man3/pcre.3
                $(INSTALL_DATA) doc/pcreposix.3 $(MANDIR)/man3/pcreposix.3
                $(INSTALL_DATA) doc/pgrep.1 $(MANDIR)/man1/pgrep.1
                @if test "$(LIBTOOL)" = "./libtool"; then \
                  echo ' '; \
                  echo '--- Rebuilding pgrep to use installed shared library ---'; \
                  echo $(CC) $(CFLAGS) -o pgrep pgrep.o -L$(LIBDIR) -lpcre; \
                  $(CC) $(CFLAGS) -o pgrep pgrep.o -L$(LIBDIR) -lpcre; \
                  echo '--- Rebuilding pcretest to use installed shared library ---'; \
                  echo $(CC) $(CFLAGS) -o pcretest pcretest.o -L$(LIBDIR) -lpcre -lpcreposix; \
                  $(CC) $(CFLAGS) -o pcretest pcretest.o -L$(LIBDIR) -lpcre -lpcreposix; \
                fi
                $(INSTALL)      pgrep $(BINDIR)/pgrep
                $(INSTALL)      pcre-config $(BINDIR)/pcre-config

# We deliberately omit dftables and chartables.c from 'make clean'; once made
# chartables.c shouldn't change, and if people have edited the tables by hand,
# you don't want to throw them away.

clean:;         -rm -rf *.o *.lo *.a *.la .libs pcretest pgrep testtry

# But "make distclean" should get back to a virgin distribution

distclean:      clean
                -rm -f chartables.c libtool pcre-config pcre.h \
                Makefile config.h config.status config.log config.cache

check:          runtest

runtest:        all
                ./RunTest

######## MINGW32 ############### MINGW32 ############### MINGW32 #############

# This addition for mingw32 was contributed by  Paul Sokolovsky
# <Paul.Sokolovsky@technologist.com>. I (PH) don't know anything about it!

dll:            _dll libpcre.dll.a pgrep_d pcretest_d

_dll:
                $(MAKE) CFLAGS=-DSTATIC pcre.dll

pcre.dll:       $(OBJ) pcreposix.o pcre.def
libpcre.dll.a:  pcre.def

pgrep_d:        libpcre.dll.a pgrep.o
                $(CC) $(CFLAGS) -L. -o pgrep pgrep.o -lpcre.dll

pcretest_d:     libpcre.dll.a pcretest.o
                $(PURIFY) $(CC) $(CFLAGS) -L. -o pcretest pcretest.o -lpcre.dll

# End
1	nigel	41
2			# Makefile.in for PCRE (Perl-Compatible Regular Expression) library.
3
4			#---------------------------------------------------------------------------#
5			# To build mingw32 DLL uncomment the next two lines. This addition for #
6			# mingw32 was contributed by <Paul.Sokolovsky@technologist.com>. I (Philip #
7			# Hazel) don't know anything about it! There are some additional targets at #
8			# the bottom of this Makefile. #
9			#---------------------------------------------------------------------------#
10			#
11			# include dll.mk
12			# DLL_LDFLAGS=-s
13
14
15			#---------------------------------------------------------------------------#
16			# The next few lines are modified by "configure" to insert data that it is #
17			# given in its arguments, or which it finds out for itself. #
18			#---------------------------------------------------------------------------#
19
20			# BINDIR is the directory in which the pgrep command is installed.
21			# INCDIR is the directory in which the public header file pcre.h is installed.
22			# LIBDIR is the directory in which the libraries are installed.
23			# MANDIR is the directory in which the man pages are installed.
24			# The pcretest program, as it is a test program, does not get installed
25			# anywhere.
26
27			prefix = @prefix@
28			exec_prefix = @exec_prefix@
29
30	nigel	43	BINDIR = @bindir@
31			LIBDIR = @libdir@
32			INCDIR = @includedir@
33			MANDIR = @mandir@
34	nigel	41
35			CC = @CC@
36			CFLAGS = @CFLAGS@
37			RANLIB = @RANLIB@
38
39			# LIBTOOL defaults to "", which cuts out the building of shared libraries.
40			# If "configure" is called with --enable-shared-libraries, then LIBTOOL is
41	nigel	47	# set to "./libtool", which causes shared libraries to be built, and LIBSUFFIX
42	nigel	41	# is set to "la" instead of "a", which causes the shared libraries to be
43			# installed.
44
45			LIBTOOL = @LIBTOOL@
46			LIBSUFFIX = @LIBSUFFIX@
47
48	nigel	43	# These are the version numbers for the shared libraries
49	nigel	41
50	nigel	43	PCRELIBVERSION = @PCRE_LIB_VERSION@
51			PCREPOSIXLIBVERSION = @PCRE_POSIXLIB_VERSION@
52
53
54	nigel	41	#---------------------------------------------------------------------------#
55			# A copy of install-sh is in this distribution and is used by default. #
56			#---------------------------------------------------------------------------#
57
58			INSTALL = ./install-sh -c
59			INSTALL_DATA = ${INSTALL} -m 644
60
61
62			#---------------------------------------------------------------------------#
63			# For almost all systems, the command to create a library is "ar cq", but #
64			# there is at least one where it is different, to make this configurable. #
65			# However, I haven't got round to learning how to make "configure" find #
66			# this out for itself. It is necessary to use a command such as #
67			# "make AR='ar -rc'" if you need to vary this. #
68			#---------------------------------------------------------------------------#
69
70			AR = ar cq
71
72
73			##############################################################################
74
75
76			OBJ = maketables.o get.o study.o pcre.o
77			LOBJ = maketables.lo get.lo study.lo pcre.lo
78
79			all: libtool libpcre.$(LIBSUFFIX) libpcreposix.$(LIBSUFFIX) pcretest pgrep
80
81			libtool: config.guess config.sub ltconfig ltmain.sh
82	nigel	47	@if test "$(LIBTOOL)" = "./libtool"; then \
83	nigel	41	echo '--- Building libtool ---'; \
84			./ltconfig ./ltmain.sh; \
85			echo '--- Built libtool ---'; fi
86
87			pgrep: libpcre.$(LIBSUFFIX) pgrep.o
88			@echo ' '
89			@echo '--- Building pgrep utility'
90			@echo ' '
91			$(LIBTOOL) $(CC) $(CFLAGS) -o pgrep pgrep.o libpcre.$(LIBSUFFIX)
92
93			pcretest: libpcre.$(LIBSUFFIX) libpcreposix.$(LIBSUFFIX) pcretest.o
94			@echo ' '
95			@echo '--- Building pcretest testing program'
96			@echo ' '
97			$(LIBTOOL) $(PURIFY) $(CC) $(CFLAGS) -o pcretest pcretest.o \
98			libpcre.$(LIBSUFFIX) libpcreposix.$(LIBSUFFIX)
99
100			libpcre.a: $(OBJ)
101			@echo ' '
102			@echo '--- Building static library: libpcre'
103			@echo ' '
104			-rm -f libpcre.a
105			$(AR) libpcre.a $(OBJ)
106			$(RANLIB) libpcre.a
107
108			libpcre.la: $(OBJ)
109			@echo ' '
110			@echo '--- Building shared library: libpcre'
111			@echo ' '
112			-rm -f libpcre.la
113	nigel	47	./libtool $(CC) -version-info '$(PCRELIBVERSION)' -o libpcre.la -rpath $(LIBDIR) $(LOBJ)
114	nigel	41
115			libpcreposix.a: pcreposix.o
116			@echo ' '
117			@echo '--- Building static library: libpcreposix'
118			@echo ' '
119			-rm -f libpcreposix.a
120			$(AR) libpcreposix.a pcreposix.o
121			$(RANLIB) libpcreposix.a
122
123			libpcreposix.la: pcreposix.o
124			@echo ' '
125			@echo '--- Building shared library: libpcreposix'
126			@echo ' '
127			-rm -f libpcreposix.la
128	nigel	47	./libtool $(CC) -version-info '$(PCREPOSIXLIBVERSION)' -o libpcreposix.la -rpath $(LIBDIR) pcreposix.lo
129	nigel	41
130			pcre.o: chartables.c pcre.c pcre.h internal.h config.h Makefile
131			$(LIBTOOL) $(CC) -c $(CFLAGS) pcre.c
132
133			pcreposix.o: pcreposix.c pcreposix.h internal.h pcre.h config.h Makefile
134			$(LIBTOOL) $(CC) -c $(CFLAGS) pcreposix.c
135
136			maketables.o: maketables.c pcre.h internal.h config.h Makefile
137			$(LIBTOOL) $(CC) -c $(CFLAGS) maketables.c
138
139			get.o: get.c pcre.h internal.h config.h Makefile
140			$(LIBTOOL) $(CC) -c $(CFLAGS) get.c
141
142			study.o: study.c pcre.h internal.h config.h Makefile
143			$(LIBTOOL) $(CC) -c $(CFLAGS) study.c
144
145			pcretest.o: pcretest.c pcre.h config.h Makefile
146			$(CC) -c $(CFLAGS) pcretest.c
147
148			pgrep.o: pgrep.c pcre.h Makefile config.h
149			$(CC) -c $(CFLAGS) pgrep.c
150
151			# An auxiliary program makes the default character table source
152
153			chartables.c: dftables
154			./dftables >chartables.c
155
156			dftables: dftables.c maketables.c pcre.h internal.h config.h Makefile
157			$(CC) -o dftables $(CFLAGS) dftables.c
158
159			install: all
160			$(LIBTOOL) $(INSTALL_DATA) libpcre.$(LIBSUFFIX) $(LIBDIR)/libpcre.$(LIBSUFFIX)
161			$(LIBTOOL) $(INSTALL_DATA) libpcreposix.$(LIBSUFFIX) $(LIBDIR)/libpcreposix.$(LIBSUFFIX)
162			$(INSTALL_DATA) pcre.h $(INCDIR)/pcre.h
163	nigel	45	$(INSTALL_DATA) pcreposix.h $(INCDIR)/pcreposix.h
164	nigel	41	$(INSTALL_DATA) doc/pcre.3 $(MANDIR)/man3/pcre.3
165	nigel	45	$(INSTALL_DATA) doc/pcreposix.3 $(MANDIR)/man3/pcreposix.3
166	nigel	41	$(INSTALL_DATA) doc/pgrep.1 $(MANDIR)/man1/pgrep.1
167	nigel	47	@if test "$(LIBTOOL)" = "./libtool"; then \
168	nigel	43	echo ' '; \
169	nigel	41	echo '--- Rebuilding pgrep to use installed shared library ---'; \
170			echo $(CC) $(CFLAGS) -o pgrep pgrep.o -L$(LIBDIR) -lpcre; \
171			$(CC) $(CFLAGS) -o pgrep pgrep.o -L$(LIBDIR) -lpcre; \
172	nigel	43	echo '--- Rebuilding pcretest to use installed shared library ---'; \
173			echo $(CC) $(CFLAGS) -o pcretest pcretest.o -L$(LIBDIR) -lpcre -lpcreposix; \
174			$(CC) $(CFLAGS) -o pcretest pcretest.o -L$(LIBDIR) -lpcre -lpcreposix; \
175	nigel	41	fi
176	nigel	43	$(INSTALL) pgrep $(BINDIR)/pgrep
177			$(INSTALL) pcre-config $(BINDIR)/pcre-config
178	nigel	41
179			# We deliberately omit dftables and chartables.c from 'make clean'; once made
180			# chartables.c shouldn't change, and if people have edited the tables by hand,
181			# you don't want to throw them away.
182
183			clean:; -rm -rf .o .lo .a .la .libs pcretest pgrep testtry
184
185			# But "make distclean" should get back to a virgin distribution
186
187			distclean: clean
188	nigel	43	-rm -f chartables.c libtool pcre-config pcre.h \
189	nigel	41	Makefile config.h config.status config.log config.cache
190
191			check: runtest
192
193			runtest: all
194			./RunTest
195
196			######## MINGW32 ############### MINGW32 ############### MINGW32 #############
197
198			# This addition for mingw32 was contributed by Paul Sokolovsky
199			# <Paul.Sokolovsky@technologist.com>. I (PH) don't know anything about it!
200
201			dll: _dll libpcre.dll.a pgrep_d pcretest_d
202
203			_dll:
204			$(MAKE) CFLAGS=-DSTATIC pcre.dll
205
206			pcre.dll: $(OBJ) pcreposix.o pcre.def
207			libpcre.dll.a: pcre.def
208
209			pgrep_d: libpcre.dll.a pgrep.o
210			$(CC) $(CFLAGS) -L. -o pgrep pgrep.o -lpcre.dll
211
212			pcretest_d: libpcre.dll.a pcretest.o
213			$(PURIFY) $(CC) $(CFLAGS) -L. -o pcretest pcretest.o -lpcre.dll
214
215			# End