/[pcre]/code/trunk/ChangeLog
ViewVC logotype

Diff of /code/trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 63 by nigel, Sat Feb 24 21:40:03 2007 UTC revision 113 by ph10, Fri Mar 9 10:13:26 2007 UTC
# Line 1  Line 1 
1  ChangeLog for PCRE  ChangeLog for PCRE
2  ------------------  ------------------
3    
4  Version 4.00 17-Feb-03  Version 7.1 05-Mar-07
5  ----------------------  ---------------------
6    
7     1. Applied Bob Rossi and Daniel G's patches to convert the build system to one
8        that is more "standard", making use of automake and other autotools. There
9        is some re-arrangement of the files and adjustment of comments consequent
10        on this.
11    
12     2. Part of the patch fixed a problem with the pcregrep tests. The test of -r
13        for recursive directory scanning broke on some systems because the files
14        are not scanned in any specific order and on different systems the order
15        was different. A call to "sort" has been inserted into RunGrepTest for the
16        approprate test as a short-term fix. In the longer term there may be an
17        alternative.
18    
19     3. I had an email from Eric Raymond about problems translating some of PCRE's
20        man pages to HTML (despite the fact that I distribute HTML pages, some
21        people do their own conversions for various reasons). The problems
22        concerned the use of low-level troff macros .br and .in. I have therefore
23        removed all such uses from the man pages (some were redundant, some could
24        be replaced by .nf/.fi pairs). The 132html script that I use to generate
25        HTML has been updated to handle .nf/.fi and to complain if it encounters
26        .br or .in.
27    
28     4. Updated comments in configure.ac that get placed in config.h.in and also
29        arranged for config.h to be included in the distribution, with the name
30        config.h.generic, for the benefit of those who have to compile without
31        Autotools (compare pcre.h, which is now distributed as pcre.h.generic).
32    
33     5. Updated the support (such as it is) for Virtual Pascal, thanks to Stefan
34        Weber: (1) pcre_internal.h was missing some function renames; (2) updated
35        makevp.bat for the current PCRE, using the additional files !compile.txt,
36        !linklib.txt, and pcregexp.pas.
37    
38     6. A Windows user reported a minor discrepancy with test 2, which turned out
39        to be caused by a trailing space on an input line that had got lost in his
40        copy. The trailing space was an accident, so I've just removed it.
41    
42     7. Add -Wl,-R... flags in pcre-config.in for *BSD* systems, as I'm told
43        that is needed.
44    
45     8. Mark ucp_table (in ucptable.h) and ucp_gentype (in pcre_ucp_searchfuncs.c)
46        as "const" (a) because they are and (b) because it helps the PHP
47        maintainers who have recently made a script to detect big data structures
48        in the php code that should be moved to the .rodata section. I remembered
49        to update Builducptable as well, so it won't revert if ucptable.h is ever
50        re-created.
51    
52     9. Added some extra #ifdef SUPPORT_UTF8 conditionals into pcretest.c,
53        pcre_printint.src, pcre_compile.c, pcre_study.c, and pcre_tables.c, in
54        order to be able to cut out the UTF-8 tables in the latter when UTF-8
55        support is not required. This saves 1.5-2K of code, which is important in
56        some applications.
57    
58        Later: more #ifdefs are needed in pcre_ord2utf8.c and pcre_valid_utf8.c
59        so as not to refer to the tables, even though these functions will never be
60        called when UTF-8 support is disabled. Otherwise there are problems with a
61        shared library.
62    
63    10. The emulated memmove() function in pcre_internal.h (provided for those
64        environments that have neither memmove() nor bcopy()) was defining its
65        arguments as char * instead of void *.
66    
67    11. The script PrepareRelease is now distributed: it calls 132html, CleanTxt,
68        and Detrail to create the HTML documentation, the .txt form of the man
69        pages, and it removes trailing spaces from listed files. It also creates
70        pcre.h.generic and config.h.generic from pcre.h and config.h. In the latter
71        case, it wraps all the #defines with #ifndefs. This script should be run
72        before "make dist".
73    
74    
75    Version 7.0 19-Dec-06
76    ---------------------
77    
78     1. Fixed a signed/unsigned compiler warning in pcre_compile.c, shown up by
79        moving to gcc 4.1.1.
80    
81     2. The -S option for pcretest uses setrlimit(); I had omitted to #include
82        sys/time.h, which is documented as needed for this function. It doesn't
83        seem to matter on Linux, but it showed up on some releases of OS X.
84    
85     3. It seems that there are systems where bytes whose values are greater than
86        127 match isprint() in the "C" locale. The "C" locale should be the
87        default when a C program starts up. In most systems, only ASCII printing
88        characters match isprint(). This difference caused the output from pcretest
89        to vary, making some of the tests fail. I have changed pcretest so that:
90    
91        (a) When it is outputting text in the compiled version of a pattern, bytes
92            other than 32-126 are always shown as hex escapes.
93    
94        (b) When it is outputting text that is a matched part of a subject string,
95            it does the same, unless a different locale has been set for the match
96            (using the /L modifier). In this case, it uses isprint() to decide.
97    
98     4. Fixed a major bug that caused incorrect computation of the amount of memory
99        required for a compiled pattern when options that changed within the
100        pattern affected the logic of the preliminary scan that determines the
101        length. The relevant options are -x, and -i in UTF-8 mode. The result was
102        that the computed length was too small. The symptoms of this bug were
103        either the PCRE error "internal error: code overflow" from pcre_compile(),
104        or a glibc crash with a message such as "pcretest: free(): invalid next
105        size (fast)". Examples of patterns that provoked this bug (shown in
106        pcretest format) are:
107    
108          /(?-x: )/x
109          /(?x)(?-x: \s*#\s*)/
110          /((?i)[\x{c0}])/8
111          /(?i:[\x{c0}])/8
112    
113        HOWEVER: Change 17 below makes this fix obsolete as the memory computation
114        is now done differently.
115    
116     5. Applied patches from Google to: (a) add a QuoteMeta function to the C++
117        wrapper classes; (b) implement a new function in the C++ scanner that is
118        more efficient than the old way of doing things because it avoids levels of
119        recursion in the regex matching; (c) add a paragraph to the documentation
120        for the FullMatch() function.
121    
122     6. The escape sequence \n was being treated as whatever was defined as
123        "newline". Not only was this contrary to the documentation, which states
124        that \n is character 10 (hex 0A), but it also went horribly wrong when
125        "newline" was defined as CRLF. This has been fixed.
126    
127     7. In pcre_dfa_exec.c the value of an unsigned integer (the variable called c)
128        was being set to -1 for the "end of line" case (supposedly a value that no
129        character can have). Though this value is never used (the check for end of
130        line is "zero bytes in current character"), it caused compiler complaints.
131        I've changed it to 0xffffffff.
132    
133     8. In pcre_version.c, the version string was being built by a sequence of
134        C macros that, in the event of PCRE_PRERELEASE being defined as an empty
135        string (as it is for production releases) called a macro with an empty
136        argument. The C standard says the result of this is undefined. The gcc
137        compiler treats it as an empty string (which was what was wanted) but it is
138        reported that Visual C gives an error. The source has been hacked around to
139        avoid this problem.
140    
141     9. On the advice of a Windows user, included <io.h> and <fcntl.h> in Windows
142        builds of pcretest, and changed the call to _setmode() to use _O_BINARY
143        instead of 0x8000. Made all the #ifdefs test both _WIN32 and WIN32 (not all
144        of them did).
145    
146    10. Originally, pcretest opened its input and output without "b"; then I was
147        told that "b" was needed in some environments, so it was added for release
148        5.0 to both the input and output. (It makes no difference on Unix-like
149        systems.) Later I was told that it is wrong for the input on Windows. I've
150        now abstracted the modes into two macros, to make it easier to fiddle with
151        them, and removed "b" from the input mode under Windows.
152    
153    11. Added pkgconfig support for the C++ wrapper library, libpcrecpp.
154    
155    12. Added -help and --help to pcretest as an official way of being reminded
156        of the options.
157    
158    13. Removed some redundant semicolons after macro calls in pcrecpparg.h.in
159        and pcrecpp.cc because they annoy compilers at high warning levels.
160    
161    14. A bit of tidying/refactoring in pcre_exec.c in the main bumpalong loop.
162    
163    15. Fixed an occurrence of == in configure.ac that should have been = (shell
164        scripts are not C programs :-) and which was not noticed because it works
165        on Linux.
166    
167    16. pcretest is supposed to handle any length of pattern and data line (as one
168        line or as a continued sequence of lines) by extending its input buffer if
169        necessary. This feature was broken for very long pattern lines, leading to
170        a string of junk being passed to pcre_compile() if the pattern was longer
171        than about 50K.
172    
173    17. I have done a major re-factoring of the way pcre_compile() computes the
174        amount of memory needed for a compiled pattern. Previously, there was code
175        that made a preliminary scan of the pattern in order to do this. That was
176        OK when PCRE was new, but as the facilities have expanded, it has become
177        harder and harder to keep it in step with the real compile phase, and there
178        have been a number of bugs (see for example, 4 above). I have now found a
179        cunning way of running the real compile function in a "fake" mode that
180        enables it to compute how much memory it would need, while actually only
181        ever using a few hundred bytes of working memory and without too many
182        tests of the mode. This should make future maintenance and development
183        easier. A side effect of this work is that the limit of 200 on the nesting
184        depth of parentheses has been removed (though this was never a serious
185        limitation, I suspect). However, there is a downside: pcre_compile() now
186        runs more slowly than before (30% or more, depending on the pattern). I
187        hope this isn't a big issue. There is no effect on runtime performance.
188    
189    18. Fixed a minor bug in pcretest: if a pattern line was not terminated by a
190        newline (only possible for the last line of a file) and it was a
191        pattern that set a locale (followed by /Lsomething), pcretest crashed.
192    
193    19. Added additional timing features to pcretest. (1) The -tm option now times
194        matching only, not compiling. (2) Both -t and -tm can be followed, as a
195        separate command line item, by a number that specifies the number of
196        repeats to use when timing. The default is 50000; this gives better
197        precision, but takes uncomfortably long for very large patterns.
198    
199    20. Extended pcre_study() to be more clever in cases where a branch of a
200        subpattern has no definite first character. For example, (a*|b*)[cd] would
201        previously give no result from pcre_study(). Now it recognizes that the
202        first character must be a, b, c, or d.
203    
204    21. There was an incorrect error "recursive call could loop indefinitely" if
205        a subpattern (or the entire pattern) that was being tested for matching an
206        empty string contained only one non-empty item after a nested subpattern.
207        For example, the pattern (?>\x{100}*)\d(?R) provoked this error
208        incorrectly, because the \d was being skipped in the check.
209    
210    22. The pcretest program now has a new pattern option /B and a command line
211        option -b, which is equivalent to adding /B to every pattern. This causes
212        it to show the compiled bytecode, without the additional information that
213        -d shows. The effect of -d is now the same as -b with -i (and similarly, /D
214        is the same as /B/I).
215    
216    23. A new optimization is now able automatically to treat some sequences such
217        as a*b as a*+b. More specifically, if something simple (such as a character
218        or a simple class like \d) has an unlimited quantifier, and is followed by
219        something that cannot possibly match the quantified thing, the quantifier
220        is automatically "possessified".
221    
222    24. A recursive reference to a subpattern whose number was greater than 39
223        went wrong under certain circumstances in UTF-8 mode. This bug could also
224        have affected the operation of pcre_study().
225    
226    25. Realized that a little bit of performance could be had by replacing
227        (c & 0xc0) == 0xc0 with c >= 0xc0 when processing UTF-8 characters.
228    
229    26. Timing data from pcretest is now shown to 4 decimal places instead of 3.
230    
231    27. Possessive quantifiers such as a++ were previously implemented by turning
232        them into atomic groups such as ($>a+). Now they have their own opcodes,
233        which improves performance. This includes the automatically created ones
234        from 23 above.
235    
236    28. A pattern such as (?=(\w+))\1: which simulates an atomic group using a
237        lookahead was broken if it was not anchored. PCRE was mistakenly expecting
238        the first matched character to be a colon. This applied both to named and
239        numbered groups.
240    
241    29. The ucpinternal.h header file was missing its idempotency #ifdef.
242    
243    30. I was sent a "project" file called libpcre.a.dev which I understand makes
244        building PCRE on Windows easier, so I have included it in the distribution.
245    
246    31. There is now a check in pcretest against a ridiculously large number being
247        returned by pcre_exec() or pcre_dfa_exec(). If this happens in a /g or /G
248        loop, the loop is abandoned.
249    
250    32. Forward references to subpatterns in conditions such as (?(2)...) where
251        subpattern 2 is defined later cause pcre_compile() to search forwards in
252        the pattern for the relevant set of parentheses. This search went wrong
253        when there were unescaped parentheses in a character class, parentheses
254        escaped with \Q...\E, or parentheses in a #-comment in /x mode.
255    
256    33. "Subroutine" calls and backreferences were previously restricted to
257        referencing subpatterns earlier in the regex. This restriction has now
258        been removed.
259    
260    34. Added a number of extra features that are going to be in Perl 5.10. On the
261        whole, these are just syntactic alternatives for features that PCRE had
262        previously implemented using the Python syntax or my own invention. The
263        other formats are all retained for compatibility.
264    
265        (a) Named groups can now be defined as (?<name>...) or (?'name'...) as well
266            as (?P<name>...). The new forms, as well as being in Perl 5.10, are
267            also .NET compatible.
268    
269        (b) A recursion or subroutine call to a named group can now be defined as
270            (?&name) as well as (?P>name).
271    
272        (c) A backreference to a named group can now be defined as \k<name> or
273            \k'name' as well as (?P=name). The new forms, as well as being in Perl
274            5.10, are also .NET compatible.
275    
276        (d) A conditional reference to a named group can now use the syntax
277            (?(<name>) or (?('name') as well as (?(name).
278    
279        (e) A "conditional group" of the form (?(DEFINE)...) can be used to define
280            groups (named and numbered) that are never evaluated inline, but can be
281            called as "subroutines" from elsewhere. In effect, the DEFINE condition
282            is always false. There may be only one alternative in such a group.
283    
284        (f) A test for recursion can be given as (?(R1).. or (?(R&name)... as well
285            as the simple (?(R). The condition is true only if the most recent
286            recursion is that of the given number or name. It does not search out
287            through the entire recursion stack.
288    
289        (g) The escape \gN or \g{N} has been added, where N is a positive or
290            negative number, specifying an absolute or relative reference.
291    
292    35. Tidied to get rid of some further signed/unsigned compiler warnings and
293        some "unreachable code" warnings.
294    
295    36. Updated the Unicode property tables to Unicode version 5.0.0. Amongst other
296        things, this adds five new scripts.
297    
298    37. Perl ignores orphaned \E escapes completely. PCRE now does the same.
299        There were also incompatibilities regarding the handling of \Q..\E inside
300        character classes, for example with patterns like [\Qa\E-\Qz\E] where the
301        hyphen was adjacent to \Q or \E. I hope I've cleared all this up now.
302    
303    38. Like Perl, PCRE detects when an indefinitely repeated parenthesized group
304        matches an empty string, and forcibly breaks the loop. There were bugs in
305        this code in non-simple cases. For a pattern such as  ^(a()*)*  matched
306        against  aaaa  the result was just "a" rather than "aaaa", for example. Two
307        separate and independent bugs (that affected different cases) have been
308        fixed.
309    
310    39. Refactored the code to abolish the use of different opcodes for small
311        capturing bracket numbers. This is a tidy that I avoided doing when I
312        removed the limit on the number of capturing brackets for 3.5 back in 2001.
313        The new approach is not only tidier, it makes it possible to reduce the
314        memory needed to fix the previous bug (38).
315    
316    40. Implemented PCRE_NEWLINE_ANY to recognize any of the Unicode newline
317        sequences (http://unicode.org/unicode/reports/tr18/) as "newline" when
318        processing dot, circumflex, or dollar metacharacters, or #-comments in /x
319        mode.
320    
321    41. Add \R to match any Unicode newline sequence, as suggested in the Unicode
322        report.
323    
324    42. Applied patch, originally from Ari Pollak, modified by Google, to allow
325        copy construction and assignment in the C++ wrapper.
326    
327    43. Updated pcregrep to support "--newline=any". In the process, I fixed a
328        couple of bugs that could have given wrong results in the "--newline=crlf"
329        case.
330    
331    44. Added a number of casts and did some reorganization of signed/unsigned int
332        variables following suggestions from Dair Grant. Also renamed the variable
333        "this" as "item" because it is a C++ keyword.
334    
335    45. Arranged for dftables to add
336    
337          #include "pcre_internal.h"
338    
339        to pcre_chartables.c because without it, gcc 4.x may remove the array
340        definition from the final binary if PCRE is built into a static library and
341        dead code stripping is activated.
342    
343    46. For an unanchored pattern, if a match attempt fails at the start of a
344        newline sequence, and the newline setting is CRLF or ANY, and the next two
345        characters are CRLF, advance by two characters instead of one.
346    
347    
348    Version 6.7 04-Jul-06
349    ---------------------
350    
351     1. In order to handle tests when input lines are enormously long, pcretest has
352        been re-factored so that it automatically extends its buffers when
353        necessary. The code is crude, but this _is_ just a test program. The
354        default size has been increased from 32K to 50K.
355    
356     2. The code in pcre_study() was using the value of the re argument before
357        testing it for NULL. (Of course, in any sensible call of the function, it
358        won't be NULL.)
359    
360     3. The memmove() emulation function in pcre_internal.h, which is used on
361        systems that lack both memmove() and bcopy() - that is, hardly ever -
362        was missing a "static" storage class specifier.
363    
364     4. When UTF-8 mode was not set, PCRE looped when compiling certain patterns
365        containing an extended class (one that cannot be represented by a bitmap
366        because it contains high-valued characters or Unicode property items, e.g.
367        [\pZ]). Almost always one would set UTF-8 mode when processing such a
368        pattern, but PCRE should not loop if you do not (it no longer does).
369        [Detail: two cases were found: (a) a repeated subpattern containing an
370        extended class; (b) a recursive reference to a subpattern that followed a
371        previous extended class. It wasn't skipping over the extended class
372        correctly when UTF-8 mode was not set.]
373    
374     5. A negated single-character class was not being recognized as fixed-length
375        in lookbehind assertions such as (?<=[^f]), leading to an incorrect
376        compile error "lookbehind assertion is not fixed length".
377    
378     6. The RunPerlTest auxiliary script was showing an unexpected difference
379        between PCRE and Perl for UTF-8 tests. It turns out that it is hard to
380        write a Perl script that can interpret lines of an input file either as
381        byte characters or as UTF-8, which is what "perltest" was being required to
382        do for the non-UTF-8 and UTF-8 tests, respectively. Essentially what you
383        can't do is switch easily at run time between having the "use utf8;" pragma
384        or not. In the end, I fudged it by using the RunPerlTest script to insert
385        "use utf8;" explicitly for the UTF-8 tests.
386    
387     7. In multiline (/m) mode, PCRE was matching ^ after a terminating newline at
388        the end of the subject string, contrary to the documentation and to what
389        Perl does. This was true of both matching functions. Now it matches only at
390        the start of the subject and immediately after *internal* newlines.
391    
392     8. A call of pcre_fullinfo() from pcretest to get the option bits was passing
393        a pointer to an int instead of a pointer to an unsigned long int. This
394        caused problems on 64-bit systems.
395    
396     9. Applied a patch from the folks at Google to pcrecpp.cc, to fix "another
397        instance of the 'standard' template library not being so standard".
398    
399    10. There was no check on the number of named subpatterns nor the maximum
400        length of a subpattern name. The product of these values is used to compute
401        the size of the memory block for a compiled pattern. By supplying a very
402        long subpattern name and a large number of named subpatterns, the size
403        computation could be caused to overflow. This is now prevented by limiting
404        the length of names to 32 characters, and the number of named subpatterns
405        to 10,000.
406    
407    11. Subpatterns that are repeated with specific counts have to be replicated in
408        the compiled pattern. The size of memory for this was computed from the
409        length of the subpattern and the repeat count. The latter is limited to
410        65535, but there was no limit on the former, meaning that integer overflow
411        could in principle occur. The compiled length of a repeated subpattern is
412        now limited to 30,000 bytes in order to prevent this.
413    
414    12. Added the optional facility to have named substrings with the same name.
415    
416    13. Added the ability to use a named substring as a condition, using the
417        Python syntax: (?(name)yes|no). This overloads (?(R)... and names that
418        are numbers (not recommended). Forward references are permitted.
419    
420    14. Added forward references in named backreferences (if you see what I mean).
421    
422    15. In UTF-8 mode, with the PCRE_DOTALL option set, a quantified dot in the
423        pattern could run off the end of the subject. For example, the pattern
424        "(?s)(.{1,5})"8 did this with the subject "ab".
425    
426    16. If PCRE_DOTALL or PCRE_MULTILINE were set, pcre_dfa_exec() behaved as if
427        PCRE_CASELESS was set when matching characters that were quantified with ?
428        or *.
429    
430    17. A character class other than a single negated character that had a minimum
431        but no maximum quantifier - for example [ab]{6,} - was not handled
432        correctly by pce_dfa_exec(). It would match only one character.
433    
434    18. A valid (though odd) pattern that looked like a POSIX character
435        class but used an invalid character after [ (for example [[,abc,]]) caused
436        pcre_compile() to give the error "Failed: internal error: code overflow" or
437        in some cases to crash with a glibc free() error. This could even happen if
438        the pattern terminated after [[ but there just happened to be a sequence of
439        letters, a binary zero, and a closing ] in the memory that followed.
440    
441    19. Perl's treatment of octal escapes in the range \400 to \777 has changed
442        over the years. Originally (before any Unicode support), just the bottom 8
443        bits were taken. Thus, for example, \500 really meant \100. Nowadays the
444        output from "man perlunicode" includes this:
445    
446          The regular expression compiler produces polymorphic opcodes.  That
447          is, the pattern adapts to the data and automatically switches to
448          the Unicode character scheme when presented with Unicode data--or
449          instead uses a traditional byte scheme when presented with byte
450          data.
451    
452        Sadly, a wide octal escape does not cause a switch, and in a string with
453        no other multibyte characters, these octal escapes are treated as before.
454        Thus, in Perl, the pattern  /\500/ actually matches \100 but the pattern
455        /\500|\x{1ff}/ matches \500 or \777 because the whole thing is treated as a
456        Unicode string.
457    
458        I have not perpetrated such confusion in PCRE. Up till now, it took just
459        the bottom 8 bits, as in old Perl. I have now made octal escapes with
460        values greater than \377 illegal in non-UTF-8 mode. In UTF-8 mode they
461        translate to the appropriate multibyte character.
462    
463    29. Applied some refactoring to reduce the number of warnings from Microsoft
464        and Borland compilers. This has included removing the fudge introduced
465        seven years ago for the OS/2 compiler (see 2.02/2 below) because it caused
466        a warning about an unused variable.
467    
468    21. PCRE has not included VT (character 0x0b) in the set of whitespace
469        characters since release 4.0, because Perl (from release 5.004) does not.
470        [Or at least, is documented not to: some releases seem to be in conflict
471        with the documentation.] However, when a pattern was studied with
472        pcre_study() and all its branches started with \s, PCRE still included VT
473        as a possible starting character. Of course, this did no harm; it just
474        caused an unnecessary match attempt.
475    
476    22. Removed a now-redundant internal flag bit that recorded the fact that case
477        dependency changed within the pattern. This was once needed for "required
478        byte" processing, but is no longer used. This recovers a now-scarce options
479        bit. Also moved the least significant internal flag bit to the most-
480        significant bit of the word, which was not previously used (hangover from
481        the days when it was an int rather than a uint) to free up another bit for
482        the future.
483    
484    23. Added support for CRLF line endings as well as CR and LF. As well as the
485        default being selectable at build time, it can now be changed at runtime
486        via the PCRE_NEWLINE_xxx flags. There are now options for pcregrep to
487        specify that it is scanning data with non-default line endings.
488    
489    24. Changed the definition of CXXLINK to make it agree with the definition of
490        LINK in the Makefile, by replacing LDFLAGS to CXXFLAGS.
491    
492    25. Applied Ian Taylor's patches to avoid using another stack frame for tail
493        recursions. This makes a big different to stack usage for some patterns.
494    
495    26. If a subpattern containing a named recursion or subroutine reference such
496        as (?P>B) was quantified, for example (xxx(?P>B)){3}, the calculation of
497        the space required for the compiled pattern went wrong and gave too small a
498        value. Depending on the environment, this could lead to "Failed: internal
499        error: code overflow at offset 49" or "glibc detected double free or
500        corruption" errors.
501    
502    27. Applied patches from Google (a) to support the new newline modes and (b) to
503        advance over multibyte UTF-8 characters in GlobalReplace.
504    
505    28. Change free() to pcre_free() in pcredemo.c. Apparently this makes a
506        difference for some implementation of PCRE in some Windows version.
507    
508    29. Added some extra testing facilities to pcretest:
509    
510        \q<number>   in a data line sets the "match limit" value
511        \Q<number>   in a data line sets the "match recursion limt" value
512        -S <number>  sets the stack size, where <number> is in megabytes
513    
514        The -S option isn't available for Windows.
515    
516    
517    Version 6.6 06-Feb-06
518    ---------------------
519    
520     1. Change 16(a) for 6.5 broke things, because PCRE_DATA_SCOPE was not defined
521        in pcreposix.h. I have copied the definition from pcre.h.
522    
523     2. Change 25 for 6.5 broke compilation in a build directory out-of-tree
524        because pcre.h is no longer a built file.
525    
526     3. Added Jeff Friedl's additional debugging patches to pcregrep. These are
527        not normally included in the compiled code.
528    
529    
530    Version 6.5 01-Feb-06
531    ---------------------
532    
533     1. When using the partial match feature with pcre_dfa_exec(), it was not
534        anchoring the second and subsequent partial matches at the new starting
535        point. This could lead to incorrect results. For example, with the pattern
536        /1234/, partially matching against "123" and then "a4" gave a match.
537    
538     2. Changes to pcregrep:
539    
540        (a) All non-match returns from pcre_exec() were being treated as failures
541            to match the line. Now, unless the error is PCRE_ERROR_NOMATCH, an
542            error message is output. Some extra information is given for the
543            PCRE_ERROR_MATCHLIMIT and PCRE_ERROR_RECURSIONLIMIT errors, which are
544            probably the only errors that are likely to be caused by users (by
545            specifying a regex that has nested indefinite repeats, for instance).
546            If there are more than 20 of these errors, pcregrep is abandoned.
547    
548        (b) A binary zero was treated as data while matching, but terminated the
549            output line if it was written out. This has been fixed: binary zeroes
550            are now no different to any other data bytes.
551    
552        (c) Whichever of the LC_ALL or LC_CTYPE environment variables is set is
553            used to set a locale for matching. The --locale=xxxx long option has
554            been added (no short equivalent) to specify a locale explicitly on the
555            pcregrep command, overriding the environment variables.
556    
557        (d) When -B was used with -n, some line numbers in the output were one less
558            than they should have been.
559    
560        (e) Added the -o (--only-matching) option.
561    
562        (f) If -A or -C was used with -c (count only), some lines of context were
563            accidentally printed for the final match.
564    
565        (g) Added the -H (--with-filename) option.
566    
567        (h) The combination of options -rh failed to suppress file names for files
568            that were found from directory arguments.
569    
570        (i) Added the -D (--devices) and -d (--directories) options.
571    
572        (j) Added the -F (--fixed-strings) option.
573    
574        (k) Allow "-" to be used as a file name for -f as well as for a data file.
575    
576        (l) Added the --colo(u)r option.
577    
578        (m) Added Jeffrey Friedl's -S testing option, but within #ifdefs so that it
579            is not present by default.
580    
581     3. A nasty bug was discovered in the handling of recursive patterns, that is,
582        items such as (?R) or (?1), when the recursion could match a number of
583        alternatives. If it matched one of the alternatives, but subsequently,
584        outside the recursion, there was a failure, the code tried to back up into
585        the recursion. However, because of the way PCRE is implemented, this is not
586        possible, and the result was an incorrect result from the match.
587    
588        In order to prevent this happening, the specification of recursion has
589        been changed so that all such subpatterns are automatically treated as
590        atomic groups. Thus, for example, (?R) is treated as if it were (?>(?R)).
591    
592     4. I had overlooked the fact that, in some locales, there are characters for
593        which isalpha() is true but neither isupper() nor islower() are true. In
594        the fr_FR locale, for instance, the \xAA and \xBA characters (ordmasculine
595        and ordfeminine) are like this. This affected the treatment of \w and \W
596        when they appeared in character classes, but not when they appeared outside
597        a character class. The bit map for "word" characters is now created
598        separately from the results of isalnum() instead of just taking it from the
599        upper, lower, and digit maps. (Plus the underscore character, of course.)
600    
601     5. The above bug also affected the handling of POSIX character classes such as
602        [[:alpha:]] and [[:alnum:]]. These do not have their own bit maps in PCRE's
603        permanent tables. Instead, the bit maps for such a class were previously
604        created as the appropriate unions of the upper, lower, and digit bitmaps.
605        Now they are created by subtraction from the [[:word:]] class, which has
606        its own bitmap.
607    
608     6. The [[:blank:]] character class matches horizontal, but not vertical space.
609        It is created by subtracting the vertical space characters (\x09, \x0a,
610        \x0b, \x0c) from the [[:space:]] bitmap. Previously, however, the
611        subtraction was done in the overall bitmap for a character class, meaning
612        that a class such as [\x0c[:blank:]] was incorrect because \x0c would not
613        be recognized. This bug has been fixed.
614    
615     7. Patches from the folks at Google:
616    
617          (a) pcrecpp.cc: "to handle a corner case that may or may not happen in
618          real life, but is still worth protecting against".
619    
620          (b) pcrecpp.cc: "corrects a bug when negative radixes are used with
621          regular expressions".
622    
623          (c) pcre_scanner.cc: avoid use of std::count() because not all systems
624          have it.
625    
626          (d) Split off pcrecpparg.h from pcrecpp.h and had the former built by
627          "configure" and the latter not, in order to fix a problem somebody had
628          with compiling the Arg class on HP-UX.
629    
630          (e) Improve the error-handling of the C++ wrapper a little bit.
631    
632          (f) New tests for checking recursion limiting.
633    
634     8. The pcre_memmove() function, which is used only if the environment does not
635        have a standard memmove() function (and is therefore rarely compiled),
636        contained two bugs: (a) use of int instead of size_t, and (b) it was not
637        returning a result (though PCRE never actually uses the result).
638    
639     9. In the POSIX regexec() interface, if nmatch is specified as a ridiculously
640        large number - greater than INT_MAX/(3*sizeof(int)) - REG_ESPACE is
641        returned instead of calling malloc() with an overflowing number that would
642        most likely cause subsequent chaos.
643    
644    10. The debugging option of pcretest was not showing the NO_AUTO_CAPTURE flag.
645    
646    11. The POSIX flag REG_NOSUB is now supported. When a pattern that was compiled
647        with this option is matched, the nmatch and pmatch options of regexec() are
648        ignored.
649    
650    12. Added REG_UTF8 to the POSIX interface. This is not defined by POSIX, but is
651        provided in case anyone wants to the the POSIX interface with UTF-8
652        strings.
653    
654    13. Added CXXLDFLAGS to the Makefile parameters to provide settings only on the
655        C++ linking (needed for some HP-UX environments).
656    
657    14. Avoid compiler warnings in get_ucpname() when compiled without UCP support
658        (unused parameter) and in the pcre_printint() function (omitted "default"
659        switch label when the default is to do nothing).
660    
661    15. Added some code to make it possible, when PCRE is compiled as a C++
662        library, to replace subject pointers for pcre_exec() with a smart pointer
663        class, thus making it possible to process discontinuous strings.
664    
665    16. The two macros PCRE_EXPORT and PCRE_DATA_SCOPE are confusing, and perform
666        much the same function. They were added by different people who were trying
667        to make PCRE easy to compile on non-Unix systems. It has been suggested
668        that PCRE_EXPORT be abolished now that there is more automatic apparatus
669        for compiling on Windows systems. I have therefore replaced it with
670        PCRE_DATA_SCOPE. This is set automatically for Windows; if not set it
671        defaults to "extern" for C or "extern C" for C++, which works fine on
672        Unix-like systems. It is now possible to override the value of PCRE_DATA_
673        SCOPE with something explicit in config.h. In addition:
674    
675        (a) pcreposix.h still had just "extern" instead of either of these macros;
676            I have replaced it with PCRE_DATA_SCOPE.
677    
678        (b) Functions such as _pcre_xclass(), which are internal to the library,
679            but external in the C sense, all had PCRE_EXPORT in their definitions.
680            This is apparently wrong for the Windows case, so I have removed it.
681            (It makes no difference on Unix-like systems.)
682    
683    17. Added a new limit, MATCH_LIMIT_RECURSION, which limits the depth of nesting
684        of recursive calls to match(). This is different to MATCH_LIMIT because
685        that limits the total number of calls to match(), not all of which increase
686        the depth of recursion. Limiting the recursion depth limits the amount of
687        stack (or heap if NO_RECURSE is set) that is used. The default can be set
688        when PCRE is compiled, and changed at run time. A patch from Google adds
689        this functionality to the C++ interface.
690    
691    18. Changes to the handling of Unicode character properties:
692    
693        (a) Updated the table to Unicode 4.1.0.
694    
695        (b) Recognize characters that are not in the table as "Cn" (undefined).
696    
697        (c) I revised the way the table is implemented to a much improved format
698            which includes recognition of ranges. It now supports the ranges that
699            are defined in UnicodeData.txt, and it also amalgamates other
700            characters into ranges. This has reduced the number of entries in the
701            table from around 16,000 to around 3,000, thus reducing its size
702            considerably. I realized I did not need to use a tree structure after
703            all - a binary chop search is just as efficient. Having reduced the
704            number of entries, I extended their size from 6 bytes to 8 bytes to
705            allow for more data.
706    
707        (d) Added support for Unicode script names via properties such as \p{Han}.
708    
709    19. In UTF-8 mode, a backslash followed by a non-Ascii character was not
710        matching that character.
711    
712    20. When matching a repeated Unicode property with a minimum greater than zero,
713        (for example \pL{2,}), PCRE could look past the end of the subject if it
714        reached it while seeking the minimum number of characters. This could
715        happen only if some of the characters were more than one byte long, because
716        there is a check for at least the minimum number of bytes.
717    
718    21. Refactored the implementation of \p and \P so as to be more general, to
719        allow for more different types of property in future. This has changed the
720        compiled form incompatibly. Anybody with saved compiled patterns that use
721        \p or \P will have to recompile them.
722    
723    22. Added "Any" and "L&" to the supported property types.
724    
725    23. Recognize \x{...} as a code point specifier, even when not in UTF-8 mode,
726        but give a compile time error if the value is greater than 0xff.
727    
728    24. The man pages for pcrepartial, pcreprecompile, and pcre_compile2 were
729        accidentally not being installed or uninstalled.
730    
731    25. The pcre.h file was built from pcre.h.in, but the only changes that were
732        made were to insert the current release number. This seemed silly, because
733        it made things harder for people building PCRE on systems that don't run
734        "configure". I have turned pcre.h into a distributed file, no longer built
735        by "configure", with the version identification directly included. There is
736        no longer a pcre.h.in file.
737    
738        However, this change necessitated a change to the pcre-config script as
739        well. It is built from pcre-config.in, and one of the substitutions was the
740        release number. I have updated configure.ac so that ./configure now finds
741        the release number by grepping pcre.h.
742    
743    26. Added the ability to run the tests under valgrind.
744    
745    
746    Version 6.4 05-Sep-05
747    ---------------------
748    
749     1. Change 6.0/10/(l) to pcregrep introduced a bug that caused separator lines
750        "--" to be printed when multiple files were scanned, even when none of the
751        -A, -B, or -C options were used. This is not compatible with Gnu grep, so I
752        consider it to be a bug, and have restored the previous behaviour.
753    
754     2. A couple of code tidies to get rid of compiler warnings.
755    
756     3. The pcretest program used to cheat by referring to symbols in the library
757        whose names begin with _pcre_. These are internal symbols that are not
758        really supposed to be visible externally, and in some environments it is
759        possible to suppress them. The cheating is now confined to including
760        certain files from the library's source, which is a bit cleaner.
761    
762     4. Renamed pcre.in as pcre.h.in to go with pcrecpp.h.in; it also makes the
763        file's purpose clearer.
764    
765     5. Reorganized pcre_ucp_findchar().
766    
767    
768    Version 6.3 15-Aug-05
769    ---------------------
770    
771     1. The file libpcre.pc.in did not have general read permission in the tarball.
772    
773     2. There were some problems when building without C++ support:
774    
775        (a) If C++ support was not built, "make install" and "make test" still
776            tried to test it.
777    
778        (b) There were problems when the value of CXX was explicitly set. Some
779            changes have been made to try to fix these, and ...
780    
781        (c) --disable-cpp can now be used to explicitly disable C++ support.
782    
783        (d) The use of @CPP_OBJ@ directly caused a blank line preceded by a
784            backslash in a target when C++ was disabled. This confuses some
785            versions of "make", apparently. Using an intermediate variable solves
786            this. (Same for CPP_LOBJ.)
787    
788     3. $(LINK_FOR_BUILD) now includes $(CFLAGS_FOR_BUILD) and $(LINK)
789        (non-Windows) now includes $(CFLAGS) because these flags are sometimes
790        necessary on certain architectures.
791    
792     4. Added a setting of -export-symbols-regex to the link command to remove
793        those symbols that are exported in the C sense, but actually are local
794        within the library, and not documented. Their names all begin with
795        "_pcre_". This is not a perfect job, because (a) we have to except some
796        symbols that pcretest ("illegally") uses, and (b) the facility isn't always
797        available (and never for static libraries). I have made a note to try to
798        find a way round (a) in the future.
799    
800    
801    Version 6.2 01-Aug-05
802    ---------------------
803    
804     1. There was no test for integer overflow of quantifier values. A construction
805        such as {1111111111111111} would give undefined results. What is worse, if
806        a minimum quantifier for a parenthesized subpattern overflowed and became
807        negative, the calculation of the memory size went wrong. This could have
808        led to memory overwriting.
809    
810     2. Building PCRE using VPATH was broken. Hopefully it is now fixed.
811    
812     3. Added "b" to the 2nd argument of fopen() in dftables.c, for non-Unix-like
813        operating environments where this matters.
814    
815     4. Applied Giuseppe Maxia's patch to add additional features for controlling
816        PCRE options from within the C++ wrapper.
817    
818     5. Named capturing subpatterns were not being correctly counted when a pattern
819        was compiled. This caused two problems: (a) If there were more than 100
820        such subpatterns, the calculation of the memory needed for the whole
821        compiled pattern went wrong, leading to an overflow error. (b) Numerical
822        back references of the form \12, where the number was greater than 9, were
823        not recognized as back references, even though there were sufficient
824        previous subpatterns.
825    
826     6. Two minor patches to pcrecpp.cc in order to allow it to compile on older
827        versions of gcc, e.g. 2.95.4.
828    
829    
830    Version 6.1 21-Jun-05
831    ---------------------
832    
833     1. There was one reference to the variable "posix" in pcretest.c that was not
834        surrounded by "#if !defined NOPOSIX".
835    
836     2. Make it possible to compile pcretest without DFA support, UTF8 support, or
837        the cross-check on the old pcre_info() function, for the benefit of the
838        cut-down version of PCRE that is currently imported into Exim.
839    
840     3. A (silly) pattern starting with (?i)(?-i) caused an internal space
841        allocation error. I've done the easy fix, which wastes 2 bytes for sensible
842        patterns that start (?i) but I don't think that matters. The use of (?i) is
843        just an example; this all applies to the other options as well.
844    
845     4. Since libtool seems to echo the compile commands it is issuing, the output
846        from "make" can be reduced a bit by putting "@" in front of each libtool
847        compile command.
848    
849     5. Patch from the folks at Google for configure.in to be a bit more thorough
850        in checking for a suitable C++ installation before trying to compile the
851        C++ stuff. This should fix a reported problem when a compiler was present,
852        but no suitable headers.
853    
854     6. The man pages all had just "PCRE" as their title. I have changed them to
855        be the relevant file name. I have also arranged that these names are
856        retained in the file doc/pcre.txt, which is a concatenation in text format
857        of all the man pages except the little individual ones for each function.
858    
859     7. The NON-UNIX-USE file had not been updated for the different set of source
860        files that come with release 6. I also added a few comments about the C++
861        wrapper.
862    
863    
864    Version 6.0 07-Jun-05
865    ---------------------
866    
867     1. Some minor internal re-organization to help with my DFA experiments.
868    
869     2. Some missing #ifdef SUPPORT_UCP conditionals in pcretest and printint that
870        didn't matter for the library itself when fully configured, but did matter
871        when compiling without UCP support, or within Exim, where the ucp files are
872        not imported.
873    
874     3. Refactoring of the library code to split up the various functions into
875        different source modules. The addition of the new DFA matching code (see
876        below) to a single monolithic source would have made it really too
877        unwieldy, quite apart from causing all the code to be include in a
878        statically linked application, when only some functions are used. This is
879        relevant even without the DFA addition now that patterns can be compiled in
880        one application and matched in another.
881    
882        The downside of splitting up is that there have to be some external
883        functions and data tables that are used internally in different modules of
884        the library but which are not part of the API. These have all had their
885        names changed to start with "_pcre_" so that they are unlikely to clash
886        with other external names.
887    
888     4. Added an alternate matching function, pcre_dfa_exec(), which matches using
889        a different (DFA) algorithm. Although it is slower than the original
890        function, it does have some advantages for certain types of matching
891        problem.
892    
893     5. Upgrades to pcretest in order to test the features of pcre_dfa_exec(),
894        including restarting after a partial match.
895    
896     6. A patch for pcregrep that defines INVALID_FILE_ATTRIBUTES if it is not
897        defined when compiling for Windows was sent to me. I have put it into the
898        code, though I have no means of testing or verifying it.
899    
900     7. Added the pcre_refcount() auxiliary function.
901    
902     8. Added the PCRE_FIRSTLINE option. This constrains an unanchored pattern to
903        match before or at the first newline in the subject string. In pcretest,
904        the /f option on a pattern can be used to set this.
905    
906     9. A repeated \w when used in UTF-8 mode with characters greater than 256
907        would behave wrongly. This has been present in PCRE since release 4.0.
908    
909    10. A number of changes to the pcregrep command:
910    
911        (a) Refactored how -x works; insert ^(...)$ instead of setting
912            PCRE_ANCHORED and checking the length, in preparation for adding
913            something similar for -w.
914    
915        (b) Added the -w (match as a word) option.
916    
917        (c) Refactored the way lines are read and buffered so as to have more
918            than one at a time available.
919    
920        (d) Implemented a pcregrep test script.
921    
922        (e) Added the -M (multiline match) option. This allows patterns to match
923            over several lines of the subject. The buffering ensures that at least
924            8K, or the rest of the document (whichever is the shorter) is available
925            for matching (and similarly the previous 8K for lookbehind assertions).
926    
927        (f) Changed the --help output so that it now says
928    
929              -w, --word-regex(p)
930    
931            instead of two lines, one with "regex" and the other with "regexp"
932            because that confused at least one person since the short forms are the
933            same. (This required a bit of code, as the output is generated
934            automatically from a table. It wasn't just a text change.)
935    
936        (g) -- can be used to terminate pcregrep options if the next thing isn't an
937            option but starts with a hyphen. Could be a pattern or a path name
938            starting with a hyphen, for instance.
939    
940        (h) "-" can be given as a file name to represent stdin.
941    
942        (i) When file names are being printed, "(standard input)" is used for
943            the standard input, for compatibility with GNU grep. Previously
944            "<stdin>" was used.
945    
946        (j) The option --label=xxx can be used to supply a name to be used for
947            stdin when file names are being printed. There is no short form.
948    
949        (k) Re-factored the options decoding logic because we are going to add
950            two more options that take data. Such options can now be given in four
951            different ways, e.g. "-fname", "-f name", "--file=name", "--file name".
952    
953        (l) Added the -A, -B, and -C options for requesting that lines of context
954            around matches be printed.
955    
956        (m) Added the -L option to print the names of files that do not contain
957            any matching lines, that is, the complement of -l.
958    
959        (n) The return code is 2 if any file cannot be opened, but pcregrep does
960            continue to scan other files.
961    
962        (o) The -s option was incorrectly implemented. For compatibility with other
963            greps, it now suppresses the error message for a non-existent or non-
964            accessible file (but not the return code). There is a new option called
965            -q that suppresses the output of matching lines, which was what -s was
966            previously doing.
967    
968        (p) Added --include and --exclude options to specify files for inclusion
969            and exclusion when recursing.
970    
971    11. The Makefile was not using the Autoconf-supported LDFLAGS macro properly.
972        Hopefully, it now does.
973    
974    12. Missing cast in pcre_study().
975    
976    13. Added an "uninstall" target to the makefile.
977    
978    14. Replaced "extern" in the function prototypes in Makefile.in with
979        "PCRE_DATA_SCOPE", which defaults to 'extern' or 'extern "C"' in the Unix
980        world, but is set differently for Windows.
981    
982    15. Added a second compiling function called pcre_compile2(). The only
983        difference is that it has an extra argument, which is a pointer to an
984        integer error code. When there is a compile-time failure, this is set
985        non-zero, in addition to the error test pointer being set to point to an
986        error message. The new argument may be NULL if no error number is required
987        (but then you may as well call pcre_compile(), which is now just a
988        wrapper). This facility is provided because some applications need a
989        numeric error indication, but it has also enabled me to tidy up the way
990        compile-time errors are handled in the POSIX wrapper.
991    
992    16. Added VPATH=.libs to the makefile; this should help when building with one
993        prefix path and installing with another. (Or so I'm told by someone who
994        knows more about this stuff than I do.)
995    
996    17. Added a new option, REG_DOTALL, to the POSIX function regcomp(). This
997        passes PCRE_DOTALL to the pcre_compile() function, making the "." character
998        match everything, including newlines. This is not POSIX-compatible, but
999        somebody wanted the feature. From pcretest it can be activated by using
1000        both the P and the s flags.
1001    
1002    18. AC_PROG_LIBTOOL appeared twice in Makefile.in. Removed one.
1003    
1004    19. libpcre.pc was being incorrectly installed as executable.
1005    
1006    20. A couple of places in pcretest check for end-of-line by looking for '\n';
1007        it now also looks for '\r' so that it will work unmodified on Windows.
1008    
1009    21. Added Google's contributed C++ wrapper to the distribution.
1010    
1011    22. Added some untidy missing memory free() calls in pcretest, to keep
1012        Electric Fence happy when testing.
1013    
1014    
1015    
1016    Version 5.0 13-Sep-04
1017    ---------------------
1018    
1019     1. Internal change: literal characters are no longer packed up into items
1020        containing multiple characters in a single byte-string. Each character
1021        is now matched using a separate opcode. However, there may be more than one
1022        byte in the character in UTF-8 mode.
1023    
1024     2. The pcre_callout_block structure has two new fields: pattern_position and
1025        next_item_length. These contain the offset in the pattern to the next match
1026        item, and its length, respectively.
1027    
1028     3. The PCRE_AUTO_CALLOUT option for pcre_compile() requests the automatic
1029        insertion of callouts before each pattern item. Added the /C option to
1030        pcretest to make use of this.
1031    
1032     4. On the advice of a Windows user, the lines
1033    
1034          #if defined(_WIN32) || defined(WIN32)
1035          _setmode( _fileno( stdout ), 0x8000 );
1036          #endif  /* defined(_WIN32) || defined(WIN32) */
1037    
1038        have been added to the source of pcretest. This apparently does useful
1039        magic in relation to line terminators.
1040    
1041     5. Changed "r" and "w" in the calls to fopen() in pcretest to "rb" and "wb"
1042        for the benefit of those environments where the "b" makes a difference.
1043    
1044     6. The icc compiler has the same options as gcc, but "configure" doesn't seem
1045        to know about it. I have put a hack into configure.in that adds in code
1046        to set GCC=yes if CC=icc. This seems to end up at a point in the
1047        generated configure script that is early enough to affect the setting of
1048        compiler options, which is what is needed, but I have no means of testing
1049        whether it really works. (The user who reported this had patched the
1050        generated configure script, which of course I cannot do.)
1051    
1052        LATER: After change 22 below (new libtool files), the configure script
1053        seems to know about icc (and also ecc). Therefore, I have commented out
1054        this hack in configure.in.
1055    
1056     7. Added support for pkg-config (2 patches were sent in).
1057    
1058     8. Negated POSIX character classes that used a combination of internal tables
1059        were completely broken. These were [[:^alpha:]], [[:^alnum:]], and
1060        [[:^ascii]]. Typically, they would match almost any characters. The other
1061        POSIX classes were not broken in this way.
1062    
1063     9. Matching the pattern "\b.*?" against "ab cd", starting at offset 1, failed
1064        to find the match, as PCRE was deluded into thinking that the match had to
1065        start at the start point or following a newline. The same bug applied to
1066        patterns with negative forward assertions or any backward assertions
1067        preceding ".*" at the start, unless the pattern required a fixed first
1068        character. This was a failing pattern: "(?!.bcd).*". The bug is now fixed.
1069    
1070    10. In UTF-8 mode, when moving forwards in the subject after a failed match
1071        starting at the last subject character, bytes beyond the end of the subject
1072        string were read.
1073    
1074    11. Renamed the variable "class" as "classbits" to make life easier for C++
1075        users. (Previously there was a macro definition, but it apparently wasn't
1076        enough.)
1077    
1078    12. Added the new field "tables" to the extra data so that tables can be passed
1079        in at exec time, or the internal tables can be re-selected. This allows
1080        a compiled regex to be saved and re-used at a later time by a different
1081        program that might have everything at different addresses.
1082    
1083    13. Modified the pcre-config script so that, when run on Solaris, it shows a
1084        -R library as well as a -L library.
1085    
1086    14. The debugging options of pcretest (-d on the command line or D on a
1087        pattern) showed incorrect output for anything following an extended class
1088        that contained multibyte characters and which was followed by a quantifier.
1089    
1090    15. Added optional support for general category Unicode character properties
1091        via the \p, \P, and \X escapes. Unicode property support implies UTF-8
1092        support. It adds about 90K to the size of the library. The meanings of the
1093        inbuilt class escapes such as \d and \s have NOT been changed.
1094    
1095    16. Updated pcredemo.c to include calls to free() to release the memory for the
1096        compiled pattern.
1097    
1098    17. The generated file chartables.c was being created in the source directory
1099        instead of in the building directory. This caused the build to fail if the
1100        source directory was different from the building directory, and was
1101        read-only.
1102    
1103    18. Added some sample Win commands from Mark Tetrode into the NON-UNIX-USE
1104        file. No doubt somebody will tell me if they don't make sense... Also added
1105        Dan Mooney's comments about building on OpenVMS.
1106    
1107    19. Added support for partial matching via the PCRE_PARTIAL option for
1108        pcre_exec() and the \P data escape in pcretest.
1109    
1110    20. Extended pcretest with 3 new pattern features:
1111    
1112        (i)   A pattern option of the form ">rest-of-line" causes pcretest to
1113              write the compiled pattern to the file whose name is "rest-of-line".
1114              This is a straight binary dump of the data, with the saved pointer to
1115              the character tables forced to be NULL. The study data, if any, is
1116              written too. After writing, pcretest reads a new pattern.
1117    
1118        (ii)  If, instead of a pattern, "<rest-of-line" is given, pcretest reads a
1119              compiled pattern from the given file. There must not be any
1120              occurrences of "<" in the file name (pretty unlikely); if there are,
1121              pcretest will instead treat the initial "<" as a pattern delimiter.
1122              After reading in the pattern, pcretest goes on to read data lines as
1123              usual.
1124    
1125        (iii) The F pattern option causes pcretest to flip the bytes in the 32-bit
1126              and 16-bit fields in a compiled pattern, to simulate a pattern that
1127              was compiled on a host of opposite endianness.
1128    
1129    21. The pcre-exec() function can now cope with patterns that were compiled on
1130        hosts of opposite endianness, with this restriction:
1131    
1132          As for any compiled expression that is saved and used later, the tables
1133          pointer field cannot be preserved; the extra_data field in the arguments
1134          to pcre_exec() should be used to pass in a tables address if a value
1135          other than the default internal tables were used at compile time.
1136    
1137    22. Calling pcre_exec() with a negative value of the "ovecsize" parameter is
1138        now diagnosed as an error. Previously, most of the time, a negative number
1139        would have been treated as zero, but if in addition "ovector" was passed as
1140        NULL, a crash could occur.
1141    
1142    23. Updated the files ltmain.sh, config.sub, config.guess, and aclocal.m4 with
1143        new versions from the libtool 1.5 distribution (the last one is a copy of
1144        a file called libtool.m4). This seems to have fixed the need to patch
1145        "configure" to support Darwin 1.3 (which I used to do). However, I still
1146        had to patch ltmain.sh to ensure that ${SED} is set (it isn't on my
1147        workstation).
1148    
1149    24. Changed the PCRE licence to be the more standard "BSD" licence.
1150    
1151    
1152    Version 4.5 01-Dec-03
1153    ---------------------
1154    
1155     1. There has been some re-arrangement of the code for the match() function so
1156        that it can be compiled in a version that does not call itself recursively.
1157        Instead, it keeps those local variables that need separate instances for
1158        each "recursion" in a frame on the heap, and gets/frees frames whenever it
1159        needs to "recurse". Keeping track of where control must go is done by means
1160        of setjmp/longjmp. The whole thing is implemented by a set of macros that
1161        hide most of the details from the main code, and operates only if
1162        NO_RECURSE is defined while compiling pcre.c. If PCRE is built using the
1163        "configure" mechanism, "--disable-stack-for-recursion" turns on this way of
1164        operating.
1165    
1166        To make it easier for callers to provide specially tailored get/free
1167        functions for this usage, two new functions, pcre_stack_malloc, and
1168        pcre_stack_free, are used. They are always called in strict stacking order,
1169        and the size of block requested is always the same.
1170    
1171        The PCRE_CONFIG_STACKRECURSE info parameter can be used to find out whether
1172        PCRE has been compiled to use the stack or the heap for recursion. The
1173        -C option of pcretest uses this to show which version is compiled.
1174    
1175        A new data escape \S, is added to pcretest; it causes the amounts of store
1176        obtained and freed by both kinds of malloc/free at match time to be added
1177        to the output.
1178    
1179     2. Changed the locale test to use "fr_FR" instead of "fr" because that's
1180        what's available on my current Linux desktop machine.
1181    
1182     3. When matching a UTF-8 string, the test for a valid string at the start has
1183        been extended. If start_offset is not zero, PCRE now checks that it points
1184        to a byte that is the start of a UTF-8 character. If not, it returns
1185        PCRE_ERROR_BADUTF8_OFFSET (-11). Note: the whole string is still checked;
1186        this is necessary because there may be backward assertions in the pattern.
1187        When matching the same subject several times, it may save resources to use
1188        PCRE_NO_UTF8_CHECK on all but the first call if the string is long.
1189    
1190     4. The code for checking the validity of UTF-8 strings has been tightened so
1191        that it rejects (a) strings containing 0xfe or 0xff bytes and (b) strings
1192        containing "overlong sequences".
1193    
1194     5. Fixed a bug (appearing twice) that I could not find any way of exploiting!
1195        I had written "if ((digitab[*p++] && chtab_digit) == 0)" where the "&&"
1196        should have been "&", but it just so happened that all the cases this let
1197        through by mistake were picked up later in the function.
1198    
1199     6. I had used a variable called "isblank" - this is a C99 function, causing
1200        some compilers to warn. To avoid this, I renamed it (as "blankclass").
1201    
1202     7. Cosmetic: (a) only output another newline at the end of pcretest if it is
1203        prompting; (b) run "./pcretest /dev/null" at the start of the test script
1204        so the version is shown; (c) stop "make test" echoing "./RunTest".
1205    
1206     8. Added patches from David Burgess to enable PCRE to run on EBCDIC systems.
1207    
1208     9. The prototype for memmove() for systems that don't have it was using
1209        size_t, but the inclusion of the header that defines size_t was later. I've
1210        moved the #includes for the C headers earlier to avoid this.
1211    
1212    10. Added some adjustments to the code to make it easier to compiler on certain
1213        special systems:
1214    
1215          (a) Some "const" qualifiers were missing.
1216          (b) Added the macro EXPORT before all exported functions; by default this
1217              is defined to be empty.
1218          (c) Changed the dftables auxiliary program (that builds chartables.c) so
1219              that it reads its output file name as an argument instead of writing
1220              to the standard output and assuming this can be redirected.
1221    
1222    11. In UTF-8 mode, if a recursive reference (e.g. (?1)) followed a character
1223        class containing characters with values greater than 255, PCRE compilation
1224        went into a loop.
1225    
1226    12. A recursive reference to a subpattern that was within another subpattern
1227        that had a minimum quantifier of zero caused PCRE to crash. For example,
1228        (x(y(?2))z)? provoked this bug with a subject that got as far as the
1229        recursion. If the recursively-called subpattern itself had a zero repeat,
1230        that was OK.
1231    
1232    13. In pcretest, the buffer for reading a data line was set at 30K, but the
1233        buffer into which it was copied (for escape processing) was still set at
1234        1024, so long lines caused crashes.
1235    
1236    14. A pattern such as /[ab]{1,3}+/ failed to compile, giving the error
1237        "internal error: code overflow...". This applied to any character class
1238        that was followed by a possessive quantifier.
1239    
1240    15. Modified the Makefile to add libpcre.la as a prerequisite for
1241        libpcreposix.la because I was told this is needed for a parallel build to
1242        work.
1243    
1244    16. If a pattern that contained .* following optional items at the start was
1245        studied, the wrong optimizing data was generated, leading to matching
1246        errors. For example, studying /[ab]*.*c/ concluded, erroneously, that any
1247        matching string must start with a or b or c. The correct conclusion for
1248        this pattern is that a match can start with any character.
1249    
1250    
1251    Version 4.4 13-Aug-03
1252    ---------------------
1253    
1254     1. In UTF-8 mode, a character class containing characters with values between
1255        127 and 255 was not handled correctly if the compiled pattern was studied.
1256        In fixing this, I have also improved the studying algorithm for such
1257        classes (slightly).
1258    
1259     2. Three internal functions had redundant arguments passed to them. Removal
1260        might give a very teeny performance improvement.
1261    
1262     3. Documentation bug: the value of the capture_top field in a callout is *one
1263        more than* the number of the hightest numbered captured substring.
1264    
1265     4. The Makefile linked pcretest and pcregrep with -lpcre, which could result
1266        in incorrectly linking with a previously installed version. They now link
1267        explicitly with libpcre.la.
1268    
1269     5. configure.in no longer needs to recognize Cygwin specially.
1270    
1271     6. A problem in pcre.in for Windows platforms is fixed.
1272    
1273     7. If a pattern was successfully studied, and the -d (or /D) flag was given to
1274        pcretest, it used to include the size of the study block as part of its
1275        output. Unfortunately, the structure contains a field that has a different
1276        size on different hardware architectures. This meant that the tests that
1277        showed this size failed. As the block is currently always of a fixed size,
1278        this information isn't actually particularly useful in pcretest output, so
1279        I have just removed it.
1280    
1281     8. Three pre-processor statements accidentally did not start in column 1.
1282        Sadly, there are *still* compilers around that complain, even though
1283        standard C has not required this for well over a decade. Sigh.
1284    
1285     9. In pcretest, the code for checking callouts passed small integers in the
1286        callout_data field, which is a void * field. However, some picky compilers
1287        complained about the casts involved for this on 64-bit systems. Now
1288        pcretest passes the address of the small integer instead, which should get
1289        rid of the warnings.
1290    
1291    10. By default, when in UTF-8 mode, PCRE now checks for valid UTF-8 strings at
1292        both compile and run time, and gives an error if an invalid UTF-8 sequence
1293        is found. There is a option for disabling this check in cases where the
1294        string is known to be correct and/or the maximum performance is wanted.
1295    
1296    11. In response to a bug report, I changed one line in Makefile.in from
1297    
1298            -Wl,--out-implib,.libs/lib@WIN_PREFIX@pcreposix.dll.a \
1299        to
1300            -Wl,--out-implib,.libs/@WIN_PREFIX@libpcreposix.dll.a \
1301    
1302        to look similar to other lines, but I have no way of telling whether this
1303        is the right thing to do, as I do not use Windows. No doubt I'll get told
1304        if it's wrong...
1305    
1306    
1307    Version 4.3 21-May-03
1308    ---------------------
1309    
1310    1. Two instances of @WIN_PREFIX@ omitted from the Windows targets in the
1311       Makefile.
1312    
1313    2. Some refactoring to improve the quality of the code:
1314    
1315       (i)   The utf8_table... variables are now declared "const".
1316    
1317       (ii)  The code for \cx, which used the "case flipping" table to upper case
1318             lower case letters, now just substracts 32. This is ASCII-specific,
1319             but the whole concept of \cx is ASCII-specific, so it seems
1320             reasonable.
1321    
1322       (iii) PCRE was using its character types table to recognize decimal and
1323             hexadecimal digits in the pattern. This is silly, because it handles
1324             only 0-9, a-f, and A-F, but the character types table is locale-
1325             specific, which means strange things might happen. A private
1326             table is now used for this - though it costs 256 bytes, a table is
1327             much faster than multiple explicit tests. Of course, the standard
1328             character types table is still used for matching digits in subject
1329             strings against \d.
1330    
1331       (iv)  Strictly, the identifier ESC_t is reserved by POSIX (all identifiers
1332             ending in _t are). So I've renamed it as ESC_tee.
1333    
1334    3. The first argument for regexec() in the POSIX wrapper should have been
1335       defined as "const".
1336    
1337    4. Changed pcretest to use malloc() for its buffers so that they can be
1338       Electric Fenced for debugging.
1339    
1340    5. There were several places in the code where, in UTF-8 mode, PCRE would try
1341       to read one or more bytes before the start of the subject string. Often this
1342       had no effect on PCRE's behaviour, but in some circumstances it could
1343       provoke a segmentation fault.
1344    
1345    6. A lookbehind at the start of a pattern in UTF-8 mode could also cause PCRE
1346       to try to read one or more bytes before the start of the subject string.
1347    
1348    7. A lookbehind in a pattern matched in non-UTF-8 mode on a PCRE compiled with
1349       UTF-8 support could misbehave in various ways if the subject string
1350       contained bytes with the 0x80 bit set and the 0x40 bit unset in a lookbehind
1351       area. (PCRE was not checking for the UTF-8 mode flag, and trying to move
1352       back over UTF-8 characters.)
1353    
1354    
1355    Version 4.2 14-Apr-03
1356    ---------------------
1357    
1358    1. Typo "#if SUPPORT_UTF8" instead of "#ifdef SUPPORT_UTF8" fixed.
1359    
1360    2. Changes to the building process, supplied by Ronald Landheer-Cieslak
1361         [ON_WINDOWS]: new variable, "#" on non-Windows platforms
1362         [NOT_ON_WINDOWS]: new variable, "#" on Windows platforms
1363         [WIN_PREFIX]: new variable, "cyg" for Cygwin
1364         * Makefile.in: use autoconf substitution for OBJEXT, EXEEXT, BUILD_OBJEXT
1365           and BUILD_EXEEXT
1366         Note: automatic setting of the BUILD variables is not yet working
1367         set CPPFLAGS and BUILD_CPPFLAGS (but don't use yet) - should be used at
1368           compile-time but not at link-time
1369         [LINK]: use for linking executables only
1370         make different versions for Windows and non-Windows
1371         [LINKLIB]: new variable, copy of UNIX-style LINK, used for linking
1372           libraries
1373         [LINK_FOR_BUILD]: new variable
1374         [OBJEXT]: use throughout
1375         [EXEEXT]: use throughout
1376         <winshared>: new target
1377         <wininstall>: new target
1378         <dftables.o>: use native compiler
1379         <dftables>: use native linker
1380         <install>: handle Windows platform correctly
1381         <clean>: ditto
1382         <check>: ditto
1383         copy DLL to top builddir before testing
1384    
1385       As part of these changes, -no-undefined was removed again. This was reported
1386       to give trouble on HP-UX 11.0, so getting rid of it seems like a good idea
1387       in any case.
1388    
1389    3. Some tidies to get rid of compiler warnings:
1390    
1391       . In the match_data structure, match_limit was an unsigned long int, whereas
1392         match_call_count was an int. I've made them both unsigned long ints.
1393    
1394       . In pcretest the fact that a const uschar * doesn't automatically cast to
1395         a void * provoked a warning.
1396    
1397       . Turning on some more compiler warnings threw up some "shadow" variables
1398         and a few more missing casts.
1399    
1400    4. If PCRE was complied with UTF-8 support, but called without the PCRE_UTF8
1401       option, a class that contained a single character with a value between 128
1402       and 255 (e.g. /[\xFF]/) caused PCRE to crash.
1403    
1404    5. If PCRE was compiled with UTF-8 support, but called without the PCRE_UTF8
1405       option, a class that contained several characters, but with at least one
1406       whose value was between 128 and 255 caused PCRE to crash.
1407    
1408    
1409    Version 4.1 12-Mar-03
1410    ---------------------
1411    
1412    1. Compiling with gcc -pedantic found a couple of places where casts were
1413    needed, and a string in dftables.c that was longer than standard compilers are
1414    required to support.
1415    
1416    2. Compiling with Sun's compiler found a few more places where the code could
1417    be tidied up in order to avoid warnings.
1418    
1419    3. The variables for cross-compiling were called HOST_CC and HOST_CFLAGS; the
1420    first of these names is deprecated in the latest Autoconf in favour of the name
1421    CC_FOR_BUILD, because "host" is typically used to mean the system on which the
1422    compiled code will be run. I can't find a reference for HOST_CFLAGS, but by
1423    analogy I have changed it to CFLAGS_FOR_BUILD.
1424    
1425    4. Added -no-undefined to the linking command in the Makefile, because this is
1426    apparently helpful for Windows. To make it work, also added "-L. -lpcre" to the
1427    linking step for the pcreposix library.
1428    
1429    5. PCRE was failing to diagnose the case of two named groups with the same
1430    name.
1431    
1432    6. A problem with one of PCRE's optimizations was discovered. PCRE remembers a
1433    literal character that is needed in the subject for a match, and scans along to
1434    ensure that it is present before embarking on the full matching process. This
1435    saves time in cases of nested unlimited repeats that are never going to match.
1436    Problem: the scan can take a lot of time if the subject is very long (e.g.
1437    megabytes), thus penalizing straightforward matches. It is now done only if the
1438    amount of subject to be scanned is less than 1000 bytes.
1439    
1440    7. A lesser problem with the same optimization is that it was recording the
1441    first character of an anchored pattern as "needed", thus provoking a search
1442    right along the subject, even when the first match of the pattern was going to
1443    fail. The "needed" character is now not set for anchored patterns, unless it
1444    follows something in the pattern that is of non-fixed length. Thus, it still
1445    fulfils its original purpose of finding quick non-matches in cases of nested
1446    unlimited repeats, but isn't used for simple anchored patterns such as /^abc/.
1447    
1448    
1449    Version 4.0 17-Feb-03
1450    ---------------------
1451    
1452  1. If a comment in an extended regex that started immediately after a meta-item  1. If a comment in an extended regex that started immediately after a meta-item
1453  extended to the end of string, PCRE compiled incorrect data. This could lead to  extended to the end of string, PCRE compiled incorrect data. This could lead to

Legend:
Removed from v.63  
changed lines
  Added in v.113

webmaster@exim.org
ViewVC Help
Powered by ViewVC 1.1.12