/[pcre]/code/trunk/ChangeLog
ViewVC logotype

Diff of /code/trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 151 by ph10, Tue Apr 17 15:07:29 2007 UTC revision 205 by ph10, Fri Aug 3 13:18:33 2007 UTC
# Line 1  Line 1 
1  ChangeLog for PCRE  ChangeLog for PCRE
2  ------------------  ------------------
3    
4  Version 7.1 12-Mar-07  Version 7.3 05-Jul-07
5    ---------------------
6    
7     1. In the rejigging of the build system that eventually resulted in 7.1, the
8        line "#include <pcre.h>" was included in pcre_internal.h. The use of angle
9        brackets there is not right, since it causes compilers to look for an
10        installed pcre.h, not the version that is in the source that is being
11        compiled (which of course may be different). I have changed it back to:
12    
13          #include "pcre.h"
14    
15        I have a vague recollection that the change was concerned with compiling in
16        different directories, but in the new build system, that is taken care of
17        by the VPATH setting the Makefile.
18    
19     2. The pattern .*$ when run in not-DOTALL UTF-8 mode with newline=any failed
20        when the subject happened to end in the byte 0x85 (e.g. if the last
21        character was \x{1ec5}). *Character* 0x85 is one of the "any" newline
22        characters but of course it shouldn't be taken as a newline when it is part
23        of another character. The bug was that, for an unlimited repeat of . in
24        not-DOTALL UTF-8 mode, PCRE was advancing by bytes rather than by
25        characters when looking for a newline.
26    
27     3. A small performance improvement in the DOTALL UTF-8 mode .* case.
28    
29     4. Debugging: adjusted the names of opcodes for different kinds of parentheses
30        in debug output.
31    
32     5. Arrange to use "%I64d" instead of "%lld" and "%I64u" instead of "%llu" for
33        long printing in the pcrecpp unittest when running under MinGW.
34    
35     6. ESC_K was left out of the EBCDIC table.
36    
37     7. Change 7.0/38 introduced a new limit on the number of nested non-capturing
38        parentheses; I made it 1000, which seemed large enough. Unfortunately, the
39        limit also applies to "virtual nesting" when a pattern is recursive, and in
40        this case 1000 isn't so big. I have been able to remove this limit at the
41        expense of backing off one optimization in certain circumstances. Normally,
42        when pcre_exec() would call its internal match() function recursively and
43        immediately return the result unconditionally, it uses a "tail recursion"
44        feature to save stack. However, when a subpattern that can match an empty
45        string has an unlimited repetition quantifier, it no longer makes this
46        optimization. That gives it a stack frame in which to save the data for
47        checking that an empty string has been matched. Previously this was taken
48        from the 1000-entry workspace that had been reserved. So now there is no
49        explicit limit, but more stack is used.
50    
51     8. Applied Daniel's patches to solve problems with the import/export magic
52        syntax that is required for Windows, and which was going wrong for the
53        pcreposix and pcrecpp parts of the library. These were overlooked when this
54        problem was solved for the main library.
55    
56     9. There were some crude static tests to avoid integer overflow when computing
57        the size of patterns that contain repeated groups with explicit upper
58        limits. As the maximum quantifier is 65535, the maximum group length was
59        set at 30,000 so that the product of these two numbers did not overflow a
60        32-bit integer. However, it turns out that people want to use groups that
61        are longer than 30,000 bytes (though not repeat them that many times).
62        Change 7.0/17 (the refactoring of the way the pattern size is computed) has
63        made it possible to implement the integer overflow checks in a much more
64        dynamic way, which I have now done. The artificial limitation on group
65        length has been removed - we now have only the limit on the total length of
66        the compiled pattern, which depends on the LINK_SIZE setting.
67    
68    10. Fixed a bug in the documentation for get/copy named substring when
69        duplicate names are permitted. If none of the named substrings are set, the
70        functions return PCRE_ERROR_NOSUBSTRING (7); the doc said they returned an
71        empty string.
72    
73    11. Because Perl interprets \Q...\E at a high level, and ignores orphan \E
74        instances, patterns such as [\Q\E] or [\E] or even [^\E] cause an error,
75        because the ] is interpreted as the first data character and the
76        terminating ] is not found. PCRE has been made compatible with Perl in this
77        regard. Previously, it interpreted [\Q\E] as an empty class, and [\E] could
78        cause memory overwriting.
79    
80    
81    Version 7.2 19-Jun-07
82    ---------------------
83    
84     1. If the fr_FR locale cannot be found for test 3, try the "french" locale,
85        which is apparently normally available under Windows.
86    
87     2. Re-jig the pcregrep tests with different newline settings in an attempt
88        to make them independent of the local environment's newline setting.
89    
90     3. Add code to configure.ac to remove -g from the CFLAGS default settings.
91    
92     4. Some of the "internals" tests were previously cut out when the link size
93        was not 2, because the output contained actual offsets. The recent new
94        "Z" feature of pcretest means that these can be cut out, making the tests
95        usable with all link sizes.
96    
97     5. Implemented Stan Switzer's goto replacement for longjmp() when not using
98        stack recursion. This gives a massive performance boost under BSD, but just
99        a small improvement under Linux. However, it saves one field in the frame
100        in all cases.
101    
102     6. Added more features from the forthcoming Perl 5.10:
103    
104        (a) (?-n) (where n is a string of digits) is a relative subroutine or
105            recursion call. It refers to the nth most recently opened parentheses.
106    
107        (b) (?+n) is also a relative subroutine call; it refers to the nth next
108            to be opened parentheses.
109    
110        (c) Conditions that refer to capturing parentheses can be specified
111            relatively, for example, (?(-2)... or (?(+3)...
112    
113        (d) \K resets the start of the current match so that everything before
114            is not part of it.
115    
116        (e) \k{name} is synonymous with \k<name> and \k'name' (.NET compatible).
117    
118        (f) \g{name} is another synonym - part of Perl 5.10's unification of
119            reference syntax.
120    
121        (g) (?| introduces a group in which the numbering of parentheses in each
122            alternative starts with the same number.
123    
124        (h) \h, \H, \v, and \V match horizontal and vertical whitespace.
125    
126     7. Added two new calls to pcre_fullinfo(): PCRE_INFO_OKPARTIAL and
127        PCRE_INFO_JCHANGED.
128    
129     8. A pattern such as  (.*(.)?)*  caused pcre_exec() to fail by either not
130        terminating or by crashing. Diagnosed by Viktor Griph; it was in the code
131        for detecting groups that can match an empty string.
132    
133     9. A pattern with a very large number of alternatives (more than several
134        hundred) was running out of internal workspace during the pre-compile
135        phase, where pcre_compile() figures out how much memory will be needed. A
136        bit of new cunning has reduced the workspace needed for groups with
137        alternatives. The 1000-alternative test pattern now uses 12 bytes of
138        workspace instead of running out of the 4096 that are available.
139    
140    10. Inserted some missing (unsigned int) casts to get rid of compiler warnings.
141    
142    11. Applied patch from Google to remove an optimization that didn't quite work.
143        The report of the bug said:
144    
145          pcrecpp::RE("a*").FullMatch("aaa") matches, while
146          pcrecpp::RE("a*?").FullMatch("aaa") does not, and
147          pcrecpp::RE("a*?\\z").FullMatch("aaa") does again.
148    
149    12. If \p or \P was used in non-UTF-8 mode on a character greater than 127
150        it matched the wrong number of bytes.
151    
152    
153    Version 7.1 24-Apr-07
154  ---------------------  ---------------------
155    
156   1. Applied Bob Rossi and Daniel G's patches to convert the build system to one   1. Applied Bob Rossi and Daniel G's patches to convert the build system to one
# Line 142  Version 7.1 12-Mar-07 Line 291  Version 7.1 12-Mar-07
291    
292  21. Added PCRE_NEWLINE_ANYCRLF which is like ANY, but matches only CR, LF, or  21. Added PCRE_NEWLINE_ANYCRLF which is like ANY, but matches only CR, LF, or
293      CRLF as a newline sequence.      CRLF as a newline sequence.
294    
295  22. Code for handling Unicode properties in pcre_dfa_exec() wasn't being cut  22. Code for handling Unicode properties in pcre_dfa_exec() wasn't being cut
296      out by #ifdef SUPPORT_UCP. This did no harm, as it could never be used, but      out by #ifdef SUPPORT_UCP. This did no harm, as it could never be used, but
297      I have nevertheless tidied it up.      I have nevertheless tidied it up.
298    
299  23. Added some casts to kill warnings from HP-UX ia64 compiler.  23. Added some casts to kill warnings from HP-UX ia64 compiler.
300    
301    24. Added a man page for pcre-config.
302    
303    
304  Version 7.0 19-Dec-06  Version 7.0 19-Dec-06

Legend:
Removed from v.151  
changed lines
  Added in v.205

webmaster@exim.org
ViewVC Help
Powered by ViewVC 1.1.12