/[pcre]/code/trunk/ChangeLog
ViewVC logotype

Diff of /code/trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 377 by ph10, Sun Mar 1 12:07:19 2009 UTC revision 519 by ph10, Fri May 21 16:43:17 2010 UTC
# Line 1  Line 1 
1  ChangeLog for PCRE  ChangeLog for PCRE
2  ------------------  ------------------
3    
4  Version 7.9 xx-xxx-09  Version 8.10 03 May-2010
5    ------------------------
6    
7    1.  Added support for (*MARK:ARG) and for ARG additions to PRUNE, SKIP, and
8        THEN.
9    
10    2.  (*ACCEPT) was not working when inside an atomic group.
11    
12    3.  Inside a character class, \B is treated as a literal by default, but
13        faulted if PCRE_EXTRA is set. This mimics Perl's behaviour (the -w option
14        causes the error). The code is unchanged, but I tidied the documentation.
15    
16    4.  Inside a character class, PCRE always treated \R and \X as literals,
17        whereas Perl faults them if its -w option is set. I have changed PCRE so
18        that it faults them when PCRE_EXTRA is set.
19    
20    5.  Added support for \N, which always matches any character other than
21        newline. (It is the same as "." when PCRE_DOTALL is not set.)
22    
23    6.  When compiling pcregrep with newer versions of gcc which may have
24        FORTIFY_SOURCE set, several warnings "ignoring return value of 'fwrite',
25        declared with attribute warn_unused_result" were given. Just casting the
26        result to (void) does not stop the warnings; a more elaborate fudge is
27        needed. I've used a macro to implement this.
28    
29    7.  Minor change to pcretest.c to avoid a compiler warning.
30    
31    8.  Added four artifical Unicode properties to help with an option to make
32        \s etc use properties (see next item). The new properties are: Xan
33        (alphanumeric), Xsp (Perl space), Xps (POSIX space), and Xwd (word).
34    
35    9.  Added PCRE_UCP to make \b, \d, \s, \w, and certain POSIX character classes
36        use Unicode properties. (*UCP) at the start of a pattern can be used to set
37        this option. Modified pcretest to add /W to test this facility. Added
38        REG_UCP to make it available via the POSIX interface.
39    
40    10. Added --line-buffered to pcregrep.
41    
42    
43    Version 8.02 19-Mar-2010
44    ------------------------
45    
46    1.  The Unicode data tables have been updated to Unicode 5.2.0.
47    
48    2.  Added the option --libs-cpp to pcre-config, but only when C++ support is
49        configured.
50    
51    3.  Updated the licensing terms in the pcregexp.pas file, as agreed with the
52        original author of that file, following a query about its status.
53    
54    4.  On systems that do not have stdint.h (e.g. Solaris), check for and include
55        inttypes.h instead. This fixes a bug that was introduced by change 8.01/8.
56    
57    5.  A pattern such as (?&t)*+(?(DEFINE)(?<t>.)) which has a possessive
58        quantifier applied to a forward-referencing subroutine call, could compile
59        incorrect code or give the error "internal error: previously-checked
60        referenced subpattern not found".
61    
62    6.  Both MS Visual Studio and Symbian OS have problems with initializing
63        variables to point to external functions. For these systems, therefore,
64        pcre_malloc etc. are now initialized to local functions that call the
65        relevant global functions.
66    
67    7.  There were two entries missing in the vectors called coptable and poptable
68        in pcre_dfa_exec.c. This could lead to memory accesses outsize the vectors.
69        I've fixed the data, and added a kludgy way of testing at compile time that
70        the lengths are correct (equal to the number of opcodes).
71    
72    8.  Following on from 7, I added a similar kludge to check the length of the
73        eint vector in pcreposix.c.
74    
75    9.  Error texts for pcre_compile() are held as one long string to avoid too
76        much relocation at load time. To find a text, the string is searched,
77        counting zeros. There was no check for running off the end of the string,
78        which could happen if a new error number was added without updating the
79        string.
80    
81    10. \K gave a compile-time error if it appeared in a lookbehind assersion.
82    
83    11. \K was not working if it appeared in an atomic group or in a group that
84        was called as a "subroutine", or in an assertion. Perl 5.11 documents that
85        \K is "not well defined" if used in an assertion. PCRE now accepts it if
86        the assertion is positive, but not if it is negative.
87    
88    12. Change 11 fortuitously reduced the size of the stack frame used in the
89        "match()" function of pcre_exec.c by one pointer. Forthcoming
90        implementation of support for (*MARK) will need an extra pointer on the
91        stack; I have reserved it now, so that the stack frame size does not
92        decrease.
93    
94    13. A pattern such as (?P<L1>(?P<L2>0)|(?P>L2)(?P>L1)) in which the only other
95        item in branch that calls a recursion is a subroutine call - as in the
96        second branch in the above example - was incorrectly given the compile-
97        time error "recursive call could loop indefinitely" because pcre_compile()
98        was not correctly checking the subroutine for matching a non-empty string.
99    
100    14. The checks for overrunning compiling workspace could trigger after an
101        overrun had occurred. This is a "should never occur" error, but it can be
102        triggered by pathological patterns such as hundreds of nested parentheses.
103        The checks now trigger 100 bytes before the end of the workspace.
104    
105    15. Fix typo in configure.ac: "srtoq" should be "strtoq".
106    
107    
108    Version 8.01 19-Jan-2010
109    ------------------------
110    
111    1.  If a pattern contained a conditional subpattern with only one branch (in
112        particular, this includes all (*DEFINE) patterns), a call to pcre_study()
113        computed the wrong minimum data length (which is of course zero for such
114        subpatterns). This could cause incorrect "no match" results.
115    
116    2.  For patterns such as (?i)a(?-i)b|c where an option setting at the start of
117        the pattern is reset in the first branch, pcre_compile() failed with
118        "internal error: code overflow at offset...". This happened only when
119        the reset was to the original external option setting. (An optimization
120        abstracts leading options settings into an external setting, which was the
121        cause of this.)
122    
123    3.  A pattern such as ^(?!a(*SKIP)b) where a negative assertion contained one
124        of the verbs SKIP, PRUNE, or COMMIT, did not work correctly. When the
125        assertion pattern did not match (meaning that the assertion was true), it
126        was incorrectly treated as false if the SKIP had been reached during the
127        matching. This also applied to assertions used as conditions.
128    
129    4.  If an item that is not supported by pcre_dfa_exec() was encountered in an
130        assertion subpattern, including such a pattern used as a condition,
131        unpredictable results occurred, instead of the error return
132        PCRE_ERROR_DFA_UITEM.
133    
134    5.  The C++ GlobalReplace function was not working like Perl for the special
135        situation when an empty string is matched. It now does the fancy magic
136        stuff that is necessary.
137    
138    6.  In pcre_internal.h, obsolete includes to setjmp.h and stdarg.h have been
139        removed. (These were left over from very, very early versions of PCRE.)
140    
141    7.  Some cosmetic changes to the code to make life easier when compiling it
142        as part of something else:
143    
144        (a) Change DEBUG to PCRE_DEBUG.
145    
146        (b) In pcre_compile(), rename the member of the "branch_chain" structure
147            called "current" as "current_branch", to prevent a collision with the
148            Linux macro when compiled as a kernel module.
149    
150        (c) In pcre_study(), rename the function set_bit() as set_table_bit(), to
151            prevent a collision with the Linux macro when compiled as a kernel
152            module.
153    
154    8.  In pcre_compile() there are some checks for integer overflows that used to
155        cast potentially large values to (double). This has been changed to that
156        when building, a check for int64_t is made, and if it is found, it is used
157        instead, thus avoiding the use of floating point arithmetic. (There is no
158        other use of FP in PCRE.) If int64_t is not found, the fallback is to
159        double.
160    
161    9.  Added two casts to avoid signed/unsigned warnings from VS Studio Express
162        2005 (difference between two addresses compared to an unsigned value).
163    
164    10. Change the standard AC_CHECK_LIB test for libbz2 in configure.ac to a
165        custom one, because of the following reported problem in Windows:
166    
167          - libbz2 uses the Pascal calling convention (WINAPI) for the functions
168              under Win32.
169          - The standard autoconf AC_CHECK_LIB fails to include "bzlib.h",
170              therefore missing the function definition.
171          - The compiler thus generates a "C" signature for the test function.
172          - The linker fails to find the "C" function.
173          - PCRE fails to configure if asked to do so against libbz2.
174    
175    11. When running libtoolize from libtool-2.2.6b as part of autogen.sh, these
176        messages were output:
177    
178          Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and
179          rerunning libtoolize, to keep the correct libtool macros in-tree.
180          Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
181    
182        I have done both of these things.
183    
184    12. Although pcre_dfa_exec() does not use nearly as much stack as pcre_exec()
185        most of the time, it *can* run out if it is given a pattern that contains a
186        runaway infinite recursion. I updated the discussion in the pcrestack man
187        page.
188    
189    13. Now that we have gone to the x.xx style of version numbers, the minor
190        version may start with zero. Using 08 or 09 is a bad idea because users
191        might check the value of PCRE_MINOR in their code, and 08 or 09 may be
192        interpreted as invalid octal numbers. I've updated the previous comment in
193        configure.ac, and also added a check that gives an error if 08 or 09 are
194        used.
195    
196    14. Change 8.00/11 was not quite complete: code had been accidentally omitted,
197        causing partial matching to fail when the end of the subject matched \W
198        in a UTF-8 pattern where \W was quantified with a minimum of 3.
199    
200    15. There were some discrepancies between the declarations in pcre_internal.h
201        of _pcre_is_newline(), _pcre_was_newline(), and _pcre_valid_utf8() and
202        their definitions. The declarations used "const uschar *" and the
203        definitions used USPTR. Even though USPTR is normally defined as "const
204        unsigned char *" (and uschar is typedeffed as "unsigned char"), it was
205        reported that: "This difference in casting confuses some C++ compilers, for
206        example, SunCC recognizes above declarations as different functions and
207        generates broken code for hbpcre." I have changed the declarations to use
208        USPTR.
209    
210    16. GNU libtool is named differently on some systems. The autogen.sh script now
211        tries several variants such as glibtoolize (MacOSX) and libtoolize1x
212        (FreeBSD).
213    
214    17. Applied Craig's patch that fixes an HP aCC compile error in pcre 8.00
215        (strtoXX undefined when compiling pcrecpp.cc). The patch contains this
216        comment: "Figure out how to create a longlong from a string: strtoll and
217        equivalent. It's not enough to call AC_CHECK_FUNCS: hpux has a strtoll, for
218        instance, but it only takes 2 args instead of 3!"
219    
220    18. A subtle bug concerned with back references has been fixed by a change of
221        specification, with a corresponding code fix. A pattern such as
222        ^(xa|=?\1a)+$ which contains a back reference inside the group to which it
223        refers, was giving matches when it shouldn't. For example, xa=xaaa would
224        match that pattern. Interestingly, Perl (at least up to 5.11.3) has the
225        same bug. Such groups have to be quantified to be useful, or contained
226        inside another quantified group. (If there's no repetition, the reference
227        can never match.) The problem arises because, having left the group and
228        moved on to the rest of the pattern, a later failure that backtracks into
229        the group uses the captured value from the final iteration of the group
230        rather than the correct earlier one. I have fixed this in PCRE by forcing
231        any group that contains a reference to itself to be an atomic group; that
232        is, there cannot be any backtracking into it once it has completed. This is
233        similar to recursive and subroutine calls.
234    
235    
236    Version 8.00 19-Oct-09
237    ----------------------
238    
239    1.  The table for translating pcre_compile() error codes into POSIX error codes
240        was out-of-date, and there was no check on the pcre_compile() error code
241        being within the table. This could lead to an OK return being given in
242        error.
243    
244    2.  Changed the call to open a subject file in pcregrep from fopen(pathname,
245        "r") to fopen(pathname, "rb"), which fixed a problem with some of the tests
246        in a Windows environment.
247    
248    3.  The pcregrep --count option prints the count for each file even when it is
249        zero, as does GNU grep. However, pcregrep was also printing all files when
250        --files-with-matches was added. Now, when both options are given, it prints
251        counts only for those files that have at least one match. (GNU grep just
252        prints the file name in this circumstance, but including the count seems
253        more useful - otherwise, why use --count?) Also ensured that the
254        combination -clh just lists non-zero counts, with no names.
255    
256    4.  The long form of the pcregrep -F option was incorrectly implemented as
257        --fixed_strings instead of --fixed-strings. This is an incompatible change,
258        but it seems right to fix it, and I didn't think it was worth preserving
259        the old behaviour.
260    
261    5.  The command line items --regex=pattern and --regexp=pattern were not
262        recognized by pcregrep, which required --regex pattern or --regexp pattern
263        (with a space rather than an '='). The man page documented the '=' forms,
264        which are compatible with GNU grep; these now work.
265    
266    6.  No libpcreposix.pc file was created for pkg-config; there was just
267        libpcre.pc and libpcrecpp.pc. The omission has been rectified.
268    
269    7.  Added #ifndef SUPPORT_UCP into the pcre_ucd.c module, to reduce its size
270        when UCP support is not needed, by modifying the Python script that
271        generates it from Unicode data files. This should not matter if the module
272        is correctly used as a library, but I received one complaint about 50K of
273        unwanted data. My guess is that the person linked everything into his
274        program rather than using a library. Anyway, it does no harm.
275    
276    8.  A pattern such as /\x{123}{2,2}+/8 was incorrectly compiled; the trigger
277        was a minimum greater than 1 for a wide character in a possessive
278        repetition. The same bug could also affect patterns like /(\x{ff}{0,2})*/8
279        which had an unlimited repeat of a nested, fixed maximum repeat of a wide
280        character. Chaos in the form of incorrect output or a compiling loop could
281        result.
282    
283    9.  The restrictions on what a pattern can contain when partial matching is
284        requested for pcre_exec() have been removed. All patterns can now be
285        partially matched by this function. In addition, if there are at least two
286        slots in the offset vector, the offset of the earliest inspected character
287        for the match and the offset of the end of the subject are set in them when
288        PCRE_ERROR_PARTIAL is returned.
289    
290    10. Partial matching has been split into two forms: PCRE_PARTIAL_SOFT, which is
291        synonymous with PCRE_PARTIAL, for backwards compatibility, and
292        PCRE_PARTIAL_HARD, which causes a partial match to supersede a full match,
293        and may be more useful for multi-segment matching.
294    
295    11. Partial matching with pcre_exec() is now more intuitive. A partial match
296        used to be given if ever the end of the subject was reached; now it is
297        given only if matching could not proceed because another character was
298        needed. This makes a difference in some odd cases such as Z(*FAIL) with the
299        string "Z", which now yields "no match" instead of "partial match". In the
300        case of pcre_dfa_exec(), "no match" is given if every matching path for the
301        final character ended with (*FAIL).
302    
303    12. Restarting a match using pcre_dfa_exec() after a partial match did not work
304        if the pattern had a "must contain" character that was already found in the
305        earlier partial match, unless partial matching was again requested. For
306        example, with the pattern /dog.(body)?/, the "must contain" character is
307        "g". If the first part-match was for the string "dog", restarting with
308        "sbody" failed. This bug has been fixed.
309    
310    13. The string returned by pcre_dfa_exec() after a partial match has been
311        changed so that it starts at the first inspected character rather than the
312        first character of the match. This makes a difference only if the pattern
313        starts with a lookbehind assertion or \b or \B (\K is not supported by
314        pcre_dfa_exec()). It's an incompatible change, but it makes the two
315        matching functions compatible, and I think it's the right thing to do.
316    
317    14. Added a pcredemo man page, created automatically from the pcredemo.c file,
318        so that the demonstration program is easily available in environments where
319        PCRE has not been installed from source.
320    
321    15. Arranged to add -DPCRE_STATIC to cflags in libpcre.pc, libpcreposix.cp,
322        libpcrecpp.pc and pcre-config when PCRE is not compiled as a shared
323        library.
324    
325    16. Added REG_UNGREEDY to the pcreposix interface, at the request of a user.
326        It maps to PCRE_UNGREEDY. It is not, of course, POSIX-compatible, but it
327        is not the first non-POSIX option to be added. Clearly some people find
328        these options useful.
329    
330    17. If a caller to the POSIX matching function regexec() passes a non-zero
331        value for nmatch with a NULL value for pmatch, the value of
332        nmatch is forced to zero.
333    
334    18. RunGrepTest did not have a test for the availability of the -u option of
335        the diff command, as RunTest does. It now checks in the same way as
336        RunTest, and also checks for the -b option.
337    
338    19. If an odd number of negated classes containing just a single character
339        interposed, within parentheses, between a forward reference to a named
340        subpattern and the definition of the subpattern, compilation crashed with
341        an internal error, complaining that it could not find the referenced
342        subpattern. An example of a crashing pattern is /(?&A)(([^m])(?<A>))/.
343        [The bug was that it was starting one character too far in when skipping
344        over the character class, thus treating the ] as data rather than
345        terminating the class. This meant it could skip too much.]
346    
347    20. Added PCRE_NOTEMPTY_ATSTART in order to be able to correctly implement the
348        /g option in pcretest when the pattern contains \K, which makes it possible
349        to have an empty string match not at the start, even when the pattern is
350        anchored. Updated pcretest and pcredemo to use this option.
351    
352    21. If the maximum number of capturing subpatterns in a recursion was greater
353        than the maximum at the outer level, the higher number was returned, but
354        with unset values at the outer level. The correct (outer level) value is
355        now given.
356    
357    22. If (*ACCEPT) appeared inside capturing parentheses, previous releases of
358        PCRE did not set those parentheses (unlike Perl). I have now found a way to
359        make it do so. The string so far is captured, making this feature
360        compatible with Perl.
361    
362    23. The tests have been re-organized, adding tests 11 and 12, to make it
363        possible to check the Perl 5.10 features against Perl 5.10.
364    
365    24. Perl 5.10 allows subroutine calls in lookbehinds, as long as the subroutine
366        pattern matches a fixed length string. PCRE did not allow this; now it
367        does. Neither allows recursion.
368    
369    25. I finally figured out how to implement a request to provide the minimum
370        length of subject string that was needed in order to match a given pattern.
371        (It was back references and recursion that I had previously got hung up
372        on.) This code has now been added to pcre_study(); it finds a lower bound
373        to the length of subject needed. It is not necessarily the greatest lower
374        bound, but using it to avoid searching strings that are too short does give
375        some useful speed-ups. The value is available to calling programs via
376        pcre_fullinfo().
377    
378    26. While implementing 25, I discovered to my embarrassment that pcretest had
379        not been passing the result of pcre_study() to pcre_dfa_exec(), so the
380        study optimizations had never been tested with that matching function.
381        Oops. What is worse, even when it was passed study data, there was a bug in
382        pcre_dfa_exec() that meant it never actually used it. Double oops. There
383        were also very few tests of studied patterns with pcre_dfa_exec().
384    
385    27. If (?| is used to create subpatterns with duplicate numbers, they are now
386        allowed to have the same name, even if PCRE_DUPNAMES is not set. However,
387        on the other side of the coin, they are no longer allowed to have different
388        names, because these cannot be distinguished in PCRE, and this has caused
389        confusion. (This is a difference from Perl.)
390    
391    28. When duplicate subpattern names are present (necessarily with different
392        numbers, as required by 27 above), and a test is made by name in a
393        conditional pattern, either for a subpattern having been matched, or for
394        recursion in such a pattern, all the associated numbered subpatterns are
395        tested, and the overall condition is true if the condition is true for any
396        one of them. This is the way Perl works, and is also more like the way
397        testing by number works.
398    
399    
400    Version 7.9 11-Apr-09
401  ---------------------  ---------------------
402    
403  1.  When building with support for bzlib/zlib (pcregrep) and/or readline  1.  When building with support for bzlib/zlib (pcregrep) and/or readline
404      (pcretest), all targets were linked against these libraries. This included      (pcretest), all targets were linked against these libraries. This included
405      libpcre, libpcreposix, and libpcrecpp, even though they do not use these      libpcre, libpcreposix, and libpcrecpp, even though they do not use these
406      libraries. This caused unwanted dependencies to be created. This problem      libraries. This caused unwanted dependencies to be created. This problem
407      has been fixed, and now only pcregrep is linked with bzlib/zlib and only      has been fixed, and now only pcregrep is linked with bzlib/zlib and only
408      pcretest is linked with readline.      pcretest is linked with readline.
409    
410  2.  The "typedef int BOOL" in pcre_internal.h that was included inside the  2.  The "typedef int BOOL" in pcre_internal.h that was included inside the
411      "#ifndef FALSE" condition by an earlier change (probably 7.8/18) has been      "#ifndef FALSE" condition by an earlier change (probably 7.8/18) has been
412      moved outside it again, because FALSE and TRUE are already defined in AIX,      moved outside it again, because FALSE and TRUE are already defined in AIX,
413      but BOOL is not.      but BOOL is not.
414    
415  3.  The pcre_config() function was treating the PCRE_MATCH_LIMIT and  3.  The pcre_config() function was treating the PCRE_MATCH_LIMIT and
416      PCRE_MATCH_LIMIT_RETURSION values as ints, when they should be long ints.      PCRE_MATCH_LIMIT_RECURSION values as ints, when they should be long ints.
417    
418  4.  The pcregrep documentation said spaces were inserted as well as colons (or  4.  The pcregrep documentation said spaces were inserted as well as colons (or
419      hyphens) following file names and line numbers when outputting matching      hyphens) following file names and line numbers when outputting matching
420      lines. This is not true; no spaces are inserted. I have also clarified the      lines. This is not true; no spaces are inserted. I have also clarified the
421      wording for the --colour (or --color) option.      wording for the --colour (or --color) option.
422    
423  5.  When --colour was used with -o, the list of matching strings was not  5.  In pcregrep, when --colour was used with -o, the list of matching strings
424      coloured; this is different to GNU grep, so I have changed it to be the      was not coloured; this is different to GNU grep, so I have changed it to be
425      same.      the same.
426    
427    6.  When --colo(u)r was used in pcregrep, only the first matching substring in
428        each matching line was coloured. Now it goes on to look for further matches
429        of any of the test patterns, which is the same behaviour as GNU grep.
430    
431    7.  A pattern that could match an empty string could cause pcregrep to loop; it
432        doesn't make sense to accept an empty string match in pcregrep, so I have
433        locked it out (using PCRE's PCRE_NOTEMPTY option). By experiment, this
434        seems to be how GNU grep behaves.
435    
436    8.  The pattern (?(?=.*b)b|^) was incorrectly compiled as "match must be at
437        start or after a newline", because the conditional assertion was not being
438        correctly handled. The rule now is that both the assertion and what follows
439        in the first alternative must satisfy the test.
440    
441    9.  If auto-callout was enabled in a pattern with a conditional group whose
442        condition was an assertion, PCRE could crash during matching, both with
443        pcre_exec() and pcre_dfa_exec().
444    
445    10. The PCRE_DOLLAR_ENDONLY option was not working when pcre_dfa_exec() was
446        used for matching.
447    
448    11. Unicode property support in character classes was not working for
449        characters (bytes) greater than 127 when not in UTF-8 mode.
450    
451    12. Added the -M command line option to pcretest.
452    
453    14. Added the non-standard REG_NOTEMPTY option to the POSIX interface.
454    
455    15. Added the PCRE_NO_START_OPTIMIZE match-time option.
456    
457    16. Added comments and documentation about mis-use of no_arg in the C++
458        wrapper.
459    
460    17. Implemented support for UTF-8 encoding in EBCDIC environments, a patch
461        from Martin Jerabek that uses macro names for all relevant character and
462        string constants.
463    
464    18. Added to pcre_internal.h two configuration checks: (a) If both EBCDIC and
465        SUPPORT_UTF8 are set, give an error; (b) If SUPPORT_UCP is set without
466        SUPPORT_UTF8, define SUPPORT_UTF8. The "configure" script handles both of
467        these, but not everybody uses configure.
468    
469    19. A conditional group that had only one branch was not being correctly
470        recognized as an item that could match an empty string. This meant that an
471        enclosing group might also not be so recognized, causing infinite looping
472        (and probably a segfault) for patterns such as ^"((?(?=[a])[^"])|b)*"$
473        with the subject "ab", where knowledge that the repeated group can match
474        nothing is needed in order to break the loop.
475    
476    20. If a pattern that was compiled with callouts was matched using pcre_dfa_
477        exec(), but without supplying a callout function, matching went wrong.
478    
479    21. If PCRE_ERROR_MATCHLIMIT occurred during a recursion, there was a memory
480        leak if the size of the offset vector was greater than 30. When the vector
481        is smaller, the saved offsets during recursion go onto a local stack
482        vector, but for larger vectors malloc() is used. It was failing to free
483        when the recursion yielded PCRE_ERROR_MATCH_LIMIT (or any other "abnormal"
484        error, in fact).
485    
486    22. There was a missing #ifdef SUPPORT_UTF8 round one of the variables in the
487        heapframe that is used only when UTF-8 support is enabled. This caused no
488        problem, but was untidy.
489    
490    23. Steven Van Ingelgem's patch to CMakeLists.txt to change the name
491        CMAKE_BINARY_DIR to PROJECT_BINARY_DIR so that it works when PCRE is
492        included within another project.
493    
494    24. Steven Van Ingelgem's patches to add more options to the CMake support,
495        slightly modified by me:
496    
497          (a) PCRE_BUILD_TESTS can be set OFF not to build the tests, including
498              not building pcregrep.
499    
500          (b) PCRE_BUILD_PCREGREP can be see OFF not to build pcregrep, but only
501              if PCRE_BUILD_TESTS is also set OFF, because the tests use pcregrep.
502    
503    25. Forward references, both numeric and by name, in patterns that made use of
504        duplicate group numbers, could behave incorrectly or give incorrect errors,
505        because when scanning forward to find the reference group, PCRE was not
506        taking into account the duplicate group numbers. A pattern such as
507        ^X(?3)(a)(?|(b)|(q))(Y) is an example.
508    
509    26. Changed a few more instances of "const unsigned char *" to USPTR, making
510        the feature of a custom pointer more persuasive (as requested by a user).
511    
512    27. Wrapped the definitions of fileno and isatty for Windows, which appear in
513        pcretest.c, inside #ifndefs, because it seems they are sometimes already
514        pre-defined.
515    
516    28. Added support for (*UTF8) at the start of a pattern.
517    
518    29. Arrange for flags added by the "release type" setting in CMake to be shown
519        in the configuration summary.
520    
521    
522  Version 7.8 05-Sep-08  Version 7.8 05-Sep-08
523  ---------------------  ---------------------

Legend:
Removed from v.377  
changed lines
  Added in v.519

webmaster@exim.org
ViewVC Help
Powered by ViewVC 1.1.12