/[pcre]/code/trunk/ChangeLog
ViewVC logotype

Contents of /code/trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 189 - (show annotations) (download)
Thu Jul 5 11:50:49 2007 UTC (7 years, 3 months ago) by ph10
File size: 130580 byte(s)
Change #include <pcre.h> to #include "pcre.h" in pcre_internal.h (an error that 
crept in at 7.1).

1 ChangeLog for PCRE
2 ------------------
3
4 Version 7.3 05-Jul-07
5 ---------------------
6
7 1. In the rejigging of the build system that eventually resulted in 7.1, the
8 line "#include <pcre.h>" was included in pcre_internal.h. The use of angle
9 brackets there is not right, since it causes compilers to look for an
10 installed pcre.h, not the version that is in the source that is being
11 compiled (which of course may be different). I have changed it back to:
12
13 #include "pcre.h"
14
15 I have a vague recollection that the change was concerned with compiling in
16 different directories, but in the new build system, that is taken care of
17 by the VPATH setting the Makefile.
18
19
20
21 Version 7.2 19-Jun-07
22 ---------------------
23
24 1. If the fr_FR locale cannot be found for test 3, try the "french" locale,
25 which is apparently normally available under Windows.
26
27 2. Re-jig the pcregrep tests with different newline settings in an attempt
28 to make them independent of the local environment's newline setting.
29
30 3. Add code to configure.ac to remove -g from the CFLAGS default settings.
31
32 4. Some of the "internals" tests were previously cut out when the link size
33 was not 2, because the output contained actual offsets. The recent new
34 "Z" feature of pcretest means that these can be cut out, making the tests
35 usable with all link sizes.
36
37 5. Implemented Stan Switzer's goto replacement for longjmp() when not using
38 stack recursion. This gives a massive performance boost under BSD, but just
39 a small improvement under Linux. However, it saves one field in the frame
40 in all cases.
41
42 6. Added more features from the forthcoming Perl 5.10:
43
44 (a) (?-n) (where n is a string of digits) is a relative subroutine or
45 recursion call. It refers to the nth most recently opened parentheses.
46
47 (b) (?+n) is also a relative subroutine call; it refers to the nth next
48 to be opened parentheses.
49
50 (c) Conditions that refer to capturing parentheses can be specified
51 relatively, for example, (?(-2)... or (?(+3)...
52
53 (d) \K resets the start of the current match so that everything before
54 is not part of it.
55
56 (e) \k{name} is synonymous with \k<name> and \k'name' (.NET compatible).
57
58 (f) \g{name} is another synonym - part of Perl 5.10's unification of
59 reference syntax.
60
61 (g) (?| introduces a group in which the numbering of parentheses in each
62 alternative starts with the same number.
63
64 (h) \h, \H, \v, and \V match horizontal and vertical whitespace.
65
66 7. Added two new calls to pcre_fullinfo(): PCRE_INFO_OKPARTIAL and
67 PCRE_INFO_JCHANGED.
68
69 8. A pattern such as (.*(.)?)* caused pcre_exec() to fail by either not
70 terminating or by crashing. Diagnosed by Viktor Griph; it was in the code
71 for detecting groups that can match an empty string.
72
73 9. A pattern with a very large number of alternatives (more than several
74 hundred) was running out of internal workspace during the pre-compile
75 phase, where pcre_compile() figures out how much memory will be needed. A
76 bit of new cunning has reduced the workspace needed for groups with
77 alternatives. The 1000-alternative test pattern now uses 12 bytes of
78 workspace instead of running out of the 4096 that are available.
79
80 10. Inserted some missing (unsigned int) casts to get rid of compiler warnings.
81
82 11. Applied patch from Google to remove an optimization that didn't quite work.
83 The report of the bug said:
84
85 pcrecpp::RE("a*").FullMatch("aaa") matches, while
86 pcrecpp::RE("a*?").FullMatch("aaa") does not, and
87 pcrecpp::RE("a*?\\z").FullMatch("aaa") does again.
88
89 12. If \p or \P was used in non-UTF-8 mode on a character greater than 127
90 it matched the wrong number of bytes.
91
92
93 Version 7.1 24-Apr-07
94 ---------------------
95
96 1. Applied Bob Rossi and Daniel G's patches to convert the build system to one
97 that is more "standard", making use of automake and other Autotools. There
98 is some re-arrangement of the files and adjustment of comments consequent
99 on this.
100
101 2. Part of the patch fixed a problem with the pcregrep tests. The test of -r
102 for recursive directory scanning broke on some systems because the files
103 are not scanned in any specific order and on different systems the order
104 was different. A call to "sort" has been inserted into RunGrepTest for the
105 approprate test as a short-term fix. In the longer term there may be an
106 alternative.
107
108 3. I had an email from Eric Raymond about problems translating some of PCRE's
109 man pages to HTML (despite the fact that I distribute HTML pages, some
110 people do their own conversions for various reasons). The problems
111 concerned the use of low-level troff macros .br and .in. I have therefore
112 removed all such uses from the man pages (some were redundant, some could
113 be replaced by .nf/.fi pairs). The 132html script that I use to generate
114 HTML has been updated to handle .nf/.fi and to complain if it encounters
115 .br or .in.
116
117 4. Updated comments in configure.ac that get placed in config.h.in and also
118 arranged for config.h to be included in the distribution, with the name
119 config.h.generic, for the benefit of those who have to compile without
120 Autotools (compare pcre.h, which is now distributed as pcre.h.generic).
121
122 5. Updated the support (such as it is) for Virtual Pascal, thanks to Stefan
123 Weber: (1) pcre_internal.h was missing some function renames; (2) updated
124 makevp.bat for the current PCRE, using the additional files
125 makevp_c.txt, makevp_l.txt, and pcregexp.pas.
126
127 6. A Windows user reported a minor discrepancy with test 2, which turned out
128 to be caused by a trailing space on an input line that had got lost in his
129 copy. The trailing space was an accident, so I've just removed it.
130
131 7. Add -Wl,-R... flags in pcre-config.in for *BSD* systems, as I'm told
132 that is needed.
133
134 8. Mark ucp_table (in ucptable.h) and ucp_gentype (in pcre_ucp_searchfuncs.c)
135 as "const" (a) because they are and (b) because it helps the PHP
136 maintainers who have recently made a script to detect big data structures
137 in the php code that should be moved to the .rodata section. I remembered
138 to update Builducptable as well, so it won't revert if ucptable.h is ever
139 re-created.
140
141 9. Added some extra #ifdef SUPPORT_UTF8 conditionals into pcretest.c,
142 pcre_printint.src, pcre_compile.c, pcre_study.c, and pcre_tables.c, in
143 order to be able to cut out the UTF-8 tables in the latter when UTF-8
144 support is not required. This saves 1.5-2K of code, which is important in
145 some applications.
146
147 Later: more #ifdefs are needed in pcre_ord2utf8.c and pcre_valid_utf8.c
148 so as not to refer to the tables, even though these functions will never be
149 called when UTF-8 support is disabled. Otherwise there are problems with a
150 shared library.
151
152 10. Fixed two bugs in the emulated memmove() function in pcre_internal.h:
153
154 (a) It was defining its arguments as char * instead of void *.
155
156 (b) It was assuming that all moves were upwards in memory; this was true
157 a long time ago when I wrote it, but is no longer the case.
158
159 The emulated memove() is provided for those environments that have neither
160 memmove() nor bcopy(). I didn't think anyone used it these days, but that
161 is clearly not the case, as these two bugs were recently reported.
162
163 11. The script PrepareRelease is now distributed: it calls 132html, CleanTxt,
164 and Detrail to create the HTML documentation, the .txt form of the man
165 pages, and it removes trailing spaces from listed files. It also creates
166 pcre.h.generic and config.h.generic from pcre.h and config.h. In the latter
167 case, it wraps all the #defines with #ifndefs. This script should be run
168 before "make dist".
169
170 12. Fixed two fairly obscure bugs concerned with quantified caseless matching
171 with Unicode property support.
172
173 (a) For a maximizing quantifier, if the two different cases of the
174 character were of different lengths in their UTF-8 codings (there are
175 some cases like this - I found 11), and the matching function had to
176 back up over a mixture of the two cases, it incorrectly assumed they
177 were both the same length.
178
179 (b) When PCRE was configured to use the heap rather than the stack for
180 recursion during matching, it was not correctly preserving the data for
181 the other case of a UTF-8 character when checking ahead for a match
182 while processing a minimizing repeat. If the check also involved
183 matching a wide character, but failed, corruption could cause an
184 erroneous result when trying to check for a repeat of the original
185 character.
186
187 13. Some tidying changes to the testing mechanism:
188
189 (a) The RunTest script now detects the internal link size and whether there
190 is UTF-8 and UCP support by running ./pcretest -C instead of relying on
191 values substituted by "configure". (The RunGrepTest script already did
192 this for UTF-8.) The configure.ac script no longer substitutes the
193 relevant variables.
194
195 (b) The debugging options /B and /D in pcretest show the compiled bytecode
196 with length and offset values. This means that the output is different
197 for different internal link sizes. Test 2 is skipped for link sizes
198 other than 2 because of this, bypassing the problem. Unfortunately,
199 there was also a test in test 3 (the locale tests) that used /B and
200 failed for link sizes other than 2. Rather than cut the whole test out,
201 I have added a new /Z option to pcretest that replaces the length and
202 offset values with spaces. This is now used to make test 3 independent
203 of link size. (Test 2 will be tidied up later.)
204
205 14. If erroroffset was passed as NULL to pcre_compile, it provoked a
206 segmentation fault instead of returning the appropriate error message.
207
208 15. In multiline mode when the newline sequence was set to "any", the pattern
209 ^$ would give a match between the \r and \n of a subject such as "A\r\nB".
210 This doesn't seem right; it now treats the CRLF combination as the line
211 ending, and so does not match in that case. It's only a pattern such as ^$
212 that would hit this one: something like ^ABC$ would have failed after \r
213 and then tried again after \r\n.
214
215 16. Changed the comparison command for RunGrepTest from "diff -u" to "diff -ub"
216 in an attempt to make files that differ only in their line terminators
217 compare equal. This works on Linux.
218
219 17. Under certain error circumstances pcregrep might try to free random memory
220 as it exited. This is now fixed, thanks to valgrind.
221
222 19. In pcretest, if the pattern /(?m)^$/g<any> was matched against the string
223 "abc\r\n\r\n", it found an unwanted second match after the second \r. This
224 was because its rules for how to advance for /g after matching an empty
225 string at the end of a line did not allow for this case. They now check for
226 it specially.
227
228 20. pcretest is supposed to handle patterns and data of any length, by
229 extending its buffers when necessary. It was getting this wrong when the
230 buffer for a data line had to be extended.
231
232 21. Added PCRE_NEWLINE_ANYCRLF which is like ANY, but matches only CR, LF, or
233 CRLF as a newline sequence.
234
235 22. Code for handling Unicode properties in pcre_dfa_exec() wasn't being cut
236 out by #ifdef SUPPORT_UCP. This did no harm, as it could never be used, but
237 I have nevertheless tidied it up.
238
239 23. Added some casts to kill warnings from HP-UX ia64 compiler.
240
241 24. Added a man page for pcre-config.
242
243
244 Version 7.0 19-Dec-06
245 ---------------------
246
247 1. Fixed a signed/unsigned compiler warning in pcre_compile.c, shown up by
248 moving to gcc 4.1.1.
249
250 2. The -S option for pcretest uses setrlimit(); I had omitted to #include
251 sys/time.h, which is documented as needed for this function. It doesn't
252 seem to matter on Linux, but it showed up on some releases of OS X.
253
254 3. It seems that there are systems where bytes whose values are greater than
255 127 match isprint() in the "C" locale. The "C" locale should be the
256 default when a C program starts up. In most systems, only ASCII printing
257 characters match isprint(). This difference caused the output from pcretest
258 to vary, making some of the tests fail. I have changed pcretest so that:
259
260 (a) When it is outputting text in the compiled version of a pattern, bytes
261 other than 32-126 are always shown as hex escapes.
262
263 (b) When it is outputting text that is a matched part of a subject string,
264 it does the same, unless a different locale has been set for the match
265 (using the /L modifier). In this case, it uses isprint() to decide.
266
267 4. Fixed a major bug that caused incorrect computation of the amount of memory
268 required for a compiled pattern when options that changed within the
269 pattern affected the logic of the preliminary scan that determines the
270 length. The relevant options are -x, and -i in UTF-8 mode. The result was
271 that the computed length was too small. The symptoms of this bug were
272 either the PCRE error "internal error: code overflow" from pcre_compile(),
273 or a glibc crash with a message such as "pcretest: free(): invalid next
274 size (fast)". Examples of patterns that provoked this bug (shown in
275 pcretest format) are:
276
277 /(?-x: )/x
278 /(?x)(?-x: \s*#\s*)/
279 /((?i)[\x{c0}])/8
280 /(?i:[\x{c0}])/8
281
282 HOWEVER: Change 17 below makes this fix obsolete as the memory computation
283 is now done differently.
284
285 5. Applied patches from Google to: (a) add a QuoteMeta function to the C++
286 wrapper classes; (b) implement a new function in the C++ scanner that is
287 more efficient than the old way of doing things because it avoids levels of
288 recursion in the regex matching; (c) add a paragraph to the documentation
289 for the FullMatch() function.
290
291 6. The escape sequence \n was being treated as whatever was defined as
292 "newline". Not only was this contrary to the documentation, which states
293 that \n is character 10 (hex 0A), but it also went horribly wrong when
294 "newline" was defined as CRLF. This has been fixed.
295
296 7. In pcre_dfa_exec.c the value of an unsigned integer (the variable called c)
297 was being set to -1 for the "end of line" case (supposedly a value that no
298 character can have). Though this value is never used (the check for end of
299 line is "zero bytes in current character"), it caused compiler complaints.
300 I've changed it to 0xffffffff.
301
302 8. In pcre_version.c, the version string was being built by a sequence of
303 C macros that, in the event of PCRE_PRERELEASE being defined as an empty
304 string (as it is for production releases) called a macro with an empty
305 argument. The C standard says the result of this is undefined. The gcc
306 compiler treats it as an empty string (which was what was wanted) but it is
307 reported that Visual C gives an error. The source has been hacked around to
308 avoid this problem.
309
310 9. On the advice of a Windows user, included <io.h> and <fcntl.h> in Windows
311 builds of pcretest, and changed the call to _setmode() to use _O_BINARY
312 instead of 0x8000. Made all the #ifdefs test both _WIN32 and WIN32 (not all
313 of them did).
314
315 10. Originally, pcretest opened its input and output without "b"; then I was
316 told that "b" was needed in some environments, so it was added for release
317 5.0 to both the input and output. (It makes no difference on Unix-like
318 systems.) Later I was told that it is wrong for the input on Windows. I've
319 now abstracted the modes into two macros, to make it easier to fiddle with
320 them, and removed "b" from the input mode under Windows.
321
322 11. Added pkgconfig support for the C++ wrapper library, libpcrecpp.
323
324 12. Added -help and --help to pcretest as an official way of being reminded
325 of the options.
326
327 13. Removed some redundant semicolons after macro calls in pcrecpparg.h.in
328 and pcrecpp.cc because they annoy compilers at high warning levels.
329
330 14. A bit of tidying/refactoring in pcre_exec.c in the main bumpalong loop.
331
332 15. Fixed an occurrence of == in configure.ac that should have been = (shell
333 scripts are not C programs :-) and which was not noticed because it works
334 on Linux.
335
336 16. pcretest is supposed to handle any length of pattern and data line (as one
337 line or as a continued sequence of lines) by extending its input buffer if
338 necessary. This feature was broken for very long pattern lines, leading to
339 a string of junk being passed to pcre_compile() if the pattern was longer
340 than about 50K.
341
342 17. I have done a major re-factoring of the way pcre_compile() computes the
343 amount of memory needed for a compiled pattern. Previously, there was code
344 that made a preliminary scan of the pattern in order to do this. That was
345 OK when PCRE was new, but as the facilities have expanded, it has become
346 harder and harder to keep it in step with the real compile phase, and there
347 have been a number of bugs (see for example, 4 above). I have now found a
348 cunning way of running the real compile function in a "fake" mode that
349 enables it to compute how much memory it would need, while actually only
350 ever using a few hundred bytes of working memory and without too many
351 tests of the mode. This should make future maintenance and development
352 easier. A side effect of this work is that the limit of 200 on the nesting
353 depth of parentheses has been removed (though this was never a serious
354 limitation, I suspect). However, there is a downside: pcre_compile() now
355 runs more slowly than before (30% or more, depending on the pattern). I
356 hope this isn't a big issue. There is no effect on runtime performance.
357
358 18. Fixed a minor bug in pcretest: if a pattern line was not terminated by a
359 newline (only possible for the last line of a file) and it was a
360 pattern that set a locale (followed by /Lsomething), pcretest crashed.
361
362 19. Added additional timing features to pcretest. (1) The -tm option now times
363 matching only, not compiling. (2) Both -t and -tm can be followed, as a
364 separate command line item, by a number that specifies the number of
365 repeats to use when timing. The default is 50000; this gives better
366 precision, but takes uncomfortably long for very large patterns.
367
368 20. Extended pcre_study() to be more clever in cases where a branch of a
369 subpattern has no definite first character. For example, (a*|b*)[cd] would
370 previously give no result from pcre_study(). Now it recognizes that the
371 first character must be a, b, c, or d.
372
373 21. There was an incorrect error "recursive call could loop indefinitely" if
374 a subpattern (or the entire pattern) that was being tested for matching an
375 empty string contained only one non-empty item after a nested subpattern.
376 For example, the pattern (?>\x{100}*)\d(?R) provoked this error
377 incorrectly, because the \d was being skipped in the check.
378
379 22. The pcretest program now has a new pattern option /B and a command line
380 option -b, which is equivalent to adding /B to every pattern. This causes
381 it to show the compiled bytecode, without the additional information that
382 -d shows. The effect of -d is now the same as -b with -i (and similarly, /D
383 is the same as /B/I).
384
385 23. A new optimization is now able automatically to treat some sequences such
386 as a*b as a*+b. More specifically, if something simple (such as a character
387 or a simple class like \d) has an unlimited quantifier, and is followed by
388 something that cannot possibly match the quantified thing, the quantifier
389 is automatically "possessified".
390
391 24. A recursive reference to a subpattern whose number was greater than 39
392 went wrong under certain circumstances in UTF-8 mode. This bug could also
393 have affected the operation of pcre_study().
394
395 25. Realized that a little bit of performance could be had by replacing
396 (c & 0xc0) == 0xc0 with c >= 0xc0 when processing UTF-8 characters.
397
398 26. Timing data from pcretest is now shown to 4 decimal places instead of 3.
399
400 27. Possessive quantifiers such as a++ were previously implemented by turning
401 them into atomic groups such as ($>a+). Now they have their own opcodes,
402 which improves performance. This includes the automatically created ones
403 from 23 above.
404
405 28. A pattern such as (?=(\w+))\1: which simulates an atomic group using a
406 lookahead was broken if it was not anchored. PCRE was mistakenly expecting
407 the first matched character to be a colon. This applied both to named and
408 numbered groups.
409
410 29. The ucpinternal.h header file was missing its idempotency #ifdef.
411
412 30. I was sent a "project" file called libpcre.a.dev which I understand makes
413 building PCRE on Windows easier, so I have included it in the distribution.
414
415 31. There is now a check in pcretest against a ridiculously large number being
416 returned by pcre_exec() or pcre_dfa_exec(). If this happens in a /g or /G
417 loop, the loop is abandoned.
418
419 32. Forward references to subpatterns in conditions such as (?(2)...) where
420 subpattern 2 is defined later cause pcre_compile() to search forwards in
421 the pattern for the relevant set of parentheses. This search went wrong
422 when there were unescaped parentheses in a character class, parentheses
423 escaped with \Q...\E, or parentheses in a #-comment in /x mode.
424
425 33. "Subroutine" calls and backreferences were previously restricted to
426 referencing subpatterns earlier in the regex. This restriction has now
427 been removed.
428
429 34. Added a number of extra features that are going to be in Perl 5.10. On the
430 whole, these are just syntactic alternatives for features that PCRE had
431 previously implemented using the Python syntax or my own invention. The
432 other formats are all retained for compatibility.
433
434 (a) Named groups can now be defined as (?<name>...) or (?'name'...) as well
435 as (?P<name>...). The new forms, as well as being in Perl 5.10, are
436 also .NET compatible.
437
438 (b) A recursion or subroutine call to a named group can now be defined as
439 (?&name) as well as (?P>name).
440
441 (c) A backreference to a named group can now be defined as \k<name> or
442 \k'name' as well as (?P=name). The new forms, as well as being in Perl
443 5.10, are also .NET compatible.
444
445 (d) A conditional reference to a named group can now use the syntax
446 (?(<name>) or (?('name') as well as (?(name).
447
448 (e) A "conditional group" of the form (?(DEFINE)...) can be used to define
449 groups (named and numbered) that are never evaluated inline, but can be
450 called as "subroutines" from elsewhere. In effect, the DEFINE condition
451 is always false. There may be only one alternative in such a group.
452
453 (f) A test for recursion can be given as (?(R1).. or (?(R&name)... as well
454 as the simple (?(R). The condition is true only if the most recent
455 recursion is that of the given number or name. It does not search out
456 through the entire recursion stack.
457
458 (g) The escape \gN or \g{N} has been added, where N is a positive or
459 negative number, specifying an absolute or relative reference.
460
461 35. Tidied to get rid of some further signed/unsigned compiler warnings and
462 some "unreachable code" warnings.
463
464 36. Updated the Unicode property tables to Unicode version 5.0.0. Amongst other
465 things, this adds five new scripts.
466
467 37. Perl ignores orphaned \E escapes completely. PCRE now does the same.
468 There were also incompatibilities regarding the handling of \Q..\E inside
469 character classes, for example with patterns like [\Qa\E-\Qz\E] where the
470 hyphen was adjacent to \Q or \E. I hope I've cleared all this up now.
471
472 38. Like Perl, PCRE detects when an indefinitely repeated parenthesized group
473 matches an empty string, and forcibly breaks the loop. There were bugs in
474 this code in non-simple cases. For a pattern such as ^(a()*)* matched
475 against aaaa the result was just "a" rather than "aaaa", for example. Two
476 separate and independent bugs (that affected different cases) have been
477 fixed.
478
479 39. Refactored the code to abolish the use of different opcodes for small
480 capturing bracket numbers. This is a tidy that I avoided doing when I
481 removed the limit on the number of capturing brackets for 3.5 back in 2001.
482 The new approach is not only tidier, it makes it possible to reduce the
483 memory needed to fix the previous bug (38).
484
485 40. Implemented PCRE_NEWLINE_ANY to recognize any of the Unicode newline
486 sequences (http://unicode.org/unicode/reports/tr18/) as "newline" when
487 processing dot, circumflex, or dollar metacharacters, or #-comments in /x
488 mode.
489
490 41. Add \R to match any Unicode newline sequence, as suggested in the Unicode
491 report.
492
493 42. Applied patch, originally from Ari Pollak, modified by Google, to allow
494 copy construction and assignment in the C++ wrapper.
495
496 43. Updated pcregrep to support "--newline=any". In the process, I fixed a
497 couple of bugs that could have given wrong results in the "--newline=crlf"
498 case.
499
500 44. Added a number of casts and did some reorganization of signed/unsigned int
501 variables following suggestions from Dair Grant. Also renamed the variable
502 "this" as "item" because it is a C++ keyword.
503
504 45. Arranged for dftables to add
505
506 #include "pcre_internal.h"
507
508 to pcre_chartables.c because without it, gcc 4.x may remove the array
509 definition from the final binary if PCRE is built into a static library and
510 dead code stripping is activated.
511
512 46. For an unanchored pattern, if a match attempt fails at the start of a
513 newline sequence, and the newline setting is CRLF or ANY, and the next two
514 characters are CRLF, advance by two characters instead of one.
515
516
517 Version 6.7 04-Jul-06
518 ---------------------
519
520 1. In order to handle tests when input lines are enormously long, pcretest has
521 been re-factored so that it automatically extends its buffers when
522 necessary. The code is crude, but this _is_ just a test program. The
523 default size has been increased from 32K to 50K.
524
525 2. The code in pcre_study() was using the value of the re argument before
526 testing it for NULL. (Of course, in any sensible call of the function, it
527 won't be NULL.)
528
529 3. The memmove() emulation function in pcre_internal.h, which is used on
530 systems that lack both memmove() and bcopy() - that is, hardly ever -
531 was missing a "static" storage class specifier.
532
533 4. When UTF-8 mode was not set, PCRE looped when compiling certain patterns
534 containing an extended class (one that cannot be represented by a bitmap
535 because it contains high-valued characters or Unicode property items, e.g.
536 [\pZ]). Almost always one would set UTF-8 mode when processing such a
537 pattern, but PCRE should not loop if you do not (it no longer does).
538 [Detail: two cases were found: (a) a repeated subpattern containing an
539 extended class; (b) a recursive reference to a subpattern that followed a
540 previous extended class. It wasn't skipping over the extended class
541 correctly when UTF-8 mode was not set.]
542
543 5. A negated single-character class was not being recognized as fixed-length
544 in lookbehind assertions such as (?<=[^f]), leading to an incorrect
545 compile error "lookbehind assertion is not fixed length".
546
547 6. The RunPerlTest auxiliary script was showing an unexpected difference
548 between PCRE and Perl for UTF-8 tests. It turns out that it is hard to
549 write a Perl script that can interpret lines of an input file either as
550 byte characters or as UTF-8, which is what "perltest" was being required to
551 do for the non-UTF-8 and UTF-8 tests, respectively. Essentially what you
552 can't do is switch easily at run time between having the "use utf8;" pragma
553 or not. In the end, I fudged it by using the RunPerlTest script to insert
554 "use utf8;" explicitly for the UTF-8 tests.
555
556 7. In multiline (/m) mode, PCRE was matching ^ after a terminating newline at
557 the end of the subject string, contrary to the documentation and to what
558 Perl does. This was true of both matching functions. Now it matches only at
559 the start of the subject and immediately after *internal* newlines.
560
561 8. A call of pcre_fullinfo() from pcretest to get the option bits was passing
562 a pointer to an int instead of a pointer to an unsigned long int. This
563 caused problems on 64-bit systems.
564
565 9. Applied a patch from the folks at Google to pcrecpp.cc, to fix "another
566 instance of the 'standard' template library not being so standard".
567
568 10. There was no check on the number of named subpatterns nor the maximum
569 length of a subpattern name. The product of these values is used to compute
570 the size of the memory block for a compiled pattern. By supplying a very
571 long subpattern name and a large number of named subpatterns, the size
572 computation could be caused to overflow. This is now prevented by limiting
573 the length of names to 32 characters, and the number of named subpatterns
574 to 10,000.
575
576 11. Subpatterns that are repeated with specific counts have to be replicated in
577 the compiled pattern. The size of memory for this was computed from the
578 length of the subpattern and the repeat count. The latter is limited to
579 65535, but there was no limit on the former, meaning that integer overflow
580 could in principle occur. The compiled length of a repeated subpattern is
581 now limited to 30,000 bytes in order to prevent this.
582
583 12. Added the optional facility to have named substrings with the same name.
584
585 13. Added the ability to use a named substring as a condition, using the
586 Python syntax: (?(name)yes|no). This overloads (?(R)... and names that
587 are numbers (not recommended). Forward references are permitted.
588
589 14. Added forward references in named backreferences (if you see what I mean).
590
591 15. In UTF-8 mode, with the PCRE_DOTALL option set, a quantified dot in the
592 pattern could run off the end of the subject. For example, the pattern
593 "(?s)(.{1,5})"8 did this with the subject "ab".
594
595 16. If PCRE_DOTALL or PCRE_MULTILINE were set, pcre_dfa_exec() behaved as if
596 PCRE_CASELESS was set when matching characters that were quantified with ?
597 or *.
598
599 17. A character class other than a single negated character that had a minimum
600 but no maximum quantifier - for example [ab]{6,} - was not handled
601 correctly by pce_dfa_exec(). It would match only one character.
602
603 18. A valid (though odd) pattern that looked like a POSIX character
604 class but used an invalid character after [ (for example [[,abc,]]) caused
605 pcre_compile() to give the error "Failed: internal error: code overflow" or
606 in some cases to crash with a glibc free() error. This could even happen if
607 the pattern terminated after [[ but there just happened to be a sequence of
608 letters, a binary zero, and a closing ] in the memory that followed.
609
610 19. Perl's treatment of octal escapes in the range \400 to \777 has changed
611 over the years. Originally (before any Unicode support), just the bottom 8
612 bits were taken. Thus, for example, \500 really meant \100. Nowadays the
613 output from "man perlunicode" includes this:
614
615 The regular expression compiler produces polymorphic opcodes. That
616 is, the pattern adapts to the data and automatically switches to
617 the Unicode character scheme when presented with Unicode data--or
618 instead uses a traditional byte scheme when presented with byte
619 data.
620
621 Sadly, a wide octal escape does not cause a switch, and in a string with
622 no other multibyte characters, these octal escapes are treated as before.
623 Thus, in Perl, the pattern /\500/ actually matches \100 but the pattern
624 /\500|\x{1ff}/ matches \500 or \777 because the whole thing is treated as a
625 Unicode string.
626
627 I have not perpetrated such confusion in PCRE. Up till now, it took just
628 the bottom 8 bits, as in old Perl. I have now made octal escapes with
629 values greater than \377 illegal in non-UTF-8 mode. In UTF-8 mode they
630 translate to the appropriate multibyte character.
631
632 29. Applied some refactoring to reduce the number of warnings from Microsoft
633 and Borland compilers. This has included removing the fudge introduced
634 seven years ago for the OS/2 compiler (see 2.02/2 below) because it caused
635 a warning about an unused variable.
636
637 21. PCRE has not included VT (character 0x0b) in the set of whitespace
638 characters since release 4.0, because Perl (from release 5.004) does not.
639 [Or at least, is documented not to: some releases seem to be in conflict
640 with the documentation.] However, when a pattern was studied with
641 pcre_study() and all its branches started with \s, PCRE still included VT
642 as a possible starting character. Of course, this did no harm; it just
643 caused an unnecessary match attempt.
644
645 22. Removed a now-redundant internal flag bit that recorded the fact that case
646 dependency changed within the pattern. This was once needed for "required
647 byte" processing, but is no longer used. This recovers a now-scarce options
648 bit. Also moved the least significant internal flag bit to the most-
649 significant bit of the word, which was not previously used (hangover from
650 the days when it was an int rather than a uint) to free up another bit for
651 the future.
652
653 23. Added support for CRLF line endings as well as CR and LF. As well as the
654 default being selectable at build time, it can now be changed at runtime
655 via the PCRE_NEWLINE_xxx flags. There are now options for pcregrep to
656 specify that it is scanning data with non-default line endings.
657
658 24. Changed the definition of CXXLINK to make it agree with the definition of
659 LINK in the Makefile, by replacing LDFLAGS to CXXFLAGS.
660
661 25. Applied Ian Taylor's patches to avoid using another stack frame for tail
662 recursions. This makes a big different to stack usage for some patterns.
663
664 26. If a subpattern containing a named recursion or subroutine reference such
665 as (?P>B) was quantified, for example (xxx(?P>B)){3}, the calculation of
666 the space required for the compiled pattern went wrong and gave too small a
667 value. Depending on the environment, this could lead to "Failed: internal
668 error: code overflow at offset 49" or "glibc detected double free or
669 corruption" errors.
670
671 27. Applied patches from Google (a) to support the new newline modes and (b) to
672 advance over multibyte UTF-8 characters in GlobalReplace.
673
674 28. Change free() to pcre_free() in pcredemo.c. Apparently this makes a
675 difference for some implementation of PCRE in some Windows version.
676
677 29. Added some extra testing facilities to pcretest:
678
679 \q<number> in a data line sets the "match limit" value
680 \Q<number> in a data line sets the "match recursion limt" value
681 -S <number> sets the stack size, where <number> is in megabytes
682
683 The -S option isn't available for Windows.
684
685
686 Version 6.6 06-Feb-06
687 ---------------------
688
689 1. Change 16(a) for 6.5 broke things, because PCRE_DATA_SCOPE was not defined
690 in pcreposix.h. I have copied the definition from pcre.h.
691
692 2. Change 25 for 6.5 broke compilation in a build directory out-of-tree
693 because pcre.h is no longer a built file.
694
695 3. Added Jeff Friedl's additional debugging patches to pcregrep. These are
696 not normally included in the compiled code.
697
698
699 Version 6.5 01-Feb-06
700 ---------------------
701
702 1. When using the partial match feature with pcre_dfa_exec(), it was not
703 anchoring the second and subsequent partial matches at the new starting
704 point. This could lead to incorrect results. For example, with the pattern
705 /1234/, partially matching against "123" and then "a4" gave a match.
706
707 2. Changes to pcregrep:
708
709 (a) All non-match returns from pcre_exec() were being treated as failures
710 to match the line. Now, unless the error is PCRE_ERROR_NOMATCH, an
711 error message is output. Some extra information is given for the
712 PCRE_ERROR_MATCHLIMIT and PCRE_ERROR_RECURSIONLIMIT errors, which are
713 probably the only errors that are likely to be caused by users (by
714 specifying a regex that has nested indefinite repeats, for instance).
715 If there are more than 20 of these errors, pcregrep is abandoned.
716
717 (b) A binary zero was treated as data while matching, but terminated the
718 output line if it was written out. This has been fixed: binary zeroes
719 are now no different to any other data bytes.
720
721 (c) Whichever of the LC_ALL or LC_CTYPE environment variables is set is
722 used to set a locale for matching. The --locale=xxxx long option has
723 been added (no short equivalent) to specify a locale explicitly on the
724 pcregrep command, overriding the environment variables.
725
726 (d) When -B was used with -n, some line numbers in the output were one less
727 than they should have been.
728
729 (e) Added the -o (--only-matching) option.
730
731 (f) If -A or -C was used with -c (count only), some lines of context were
732 accidentally printed for the final match.
733
734 (g) Added the -H (--with-filename) option.
735
736 (h) The combination of options -rh failed to suppress file names for files
737 that were found from directory arguments.
738
739 (i) Added the -D (--devices) and -d (--directories) options.
740
741 (j) Added the -F (--fixed-strings) option.
742
743 (k) Allow "-" to be used as a file name for -f as well as for a data file.
744
745 (l) Added the --colo(u)r option.
746
747 (m) Added Jeffrey Friedl's -S testing option, but within #ifdefs so that it
748 is not present by default.
749
750 3. A nasty bug was discovered in the handling of recursive patterns, that is,
751 items such as (?R) or (?1), when the recursion could match a number of
752 alternatives. If it matched one of the alternatives, but subsequently,
753 outside the recursion, there was a failure, the code tried to back up into
754 the recursion. However, because of the way PCRE is implemented, this is not
755 possible, and the result was an incorrect result from the match.
756
757 In order to prevent this happening, the specification of recursion has
758 been changed so that all such subpatterns are automatically treated as
759 atomic groups. Thus, for example, (?R) is treated as if it were (?>(?R)).
760
761 4. I had overlooked the fact that, in some locales, there are characters for
762 which isalpha() is true but neither isupper() nor islower() are true. In
763 the fr_FR locale, for instance, the \xAA and \xBA characters (ordmasculine
764 and ordfeminine) are like this. This affected the treatment of \w and \W
765 when they appeared in character classes, but not when they appeared outside
766 a character class. The bit map for "word" characters is now created
767 separately from the results of isalnum() instead of just taking it from the
768 upper, lower, and digit maps. (Plus the underscore character, of course.)
769
770 5. The above bug also affected the handling of POSIX character classes such as
771 [[:alpha:]] and [[:alnum:]]. These do not have their own bit maps in PCRE's
772 permanent tables. Instead, the bit maps for such a class were previously
773 created as the appropriate unions of the upper, lower, and digit bitmaps.
774 Now they are created by subtraction from the [[:word:]] class, which has
775 its own bitmap.
776
777 6. The [[:blank:]] character class matches horizontal, but not vertical space.
778 It is created by subtracting the vertical space characters (\x09, \x0a,
779 \x0b, \x0c) from the [[:space:]] bitmap. Previously, however, the
780 subtraction was done in the overall bitmap for a character class, meaning
781 that a class such as [\x0c[:blank:]] was incorrect because \x0c would not
782 be recognized. This bug has been fixed.
783
784 7. Patches from the folks at Google:
785
786 (a) pcrecpp.cc: "to handle a corner case that may or may not happen in
787 real life, but is still worth protecting against".
788
789 (b) pcrecpp.cc: "corrects a bug when negative radixes are used with
790 regular expressions".
791
792 (c) pcre_scanner.cc: avoid use of std::count() because not all systems
793 have it.
794
795 (d) Split off pcrecpparg.h from pcrecpp.h and had the former built by
796 "configure" and the latter not, in order to fix a problem somebody had
797 with compiling the Arg class on HP-UX.
798
799 (e) Improve the error-handling of the C++ wrapper a little bit.
800
801 (f) New tests for checking recursion limiting.
802
803 8. The pcre_memmove() function, which is used only if the environment does not
804 have a standard memmove() function (and is therefore rarely compiled),
805 contained two bugs: (a) use of int instead of size_t, and (b) it was not
806 returning a result (though PCRE never actually uses the result).
807
808 9. In the POSIX regexec() interface, if nmatch is specified as a ridiculously
809 large number - greater than INT_MAX/(3*sizeof(int)) - REG_ESPACE is
810 returned instead of calling malloc() with an overflowing number that would
811 most likely cause subsequent chaos.
812
813 10. The debugging option of pcretest was not showing the NO_AUTO_CAPTURE flag.
814
815 11. The POSIX flag REG_NOSUB is now supported. When a pattern that was compiled
816 with this option is matched, the nmatch and pmatch options of regexec() are
817 ignored.
818
819 12. Added REG_UTF8 to the POSIX interface. This is not defined by POSIX, but is
820 provided in case anyone wants to the the POSIX interface with UTF-8
821 strings.
822
823 13. Added CXXLDFLAGS to the Makefile parameters to provide settings only on the
824 C++ linking (needed for some HP-UX environments).
825
826 14. Avoid compiler warnings in get_ucpname() when compiled without UCP support
827 (unused parameter) and in the pcre_printint() function (omitted "default"
828 switch label when the default is to do nothing).
829
830 15. Added some code to make it possible, when PCRE is compiled as a C++
831 library, to replace subject pointers for pcre_exec() with a smart pointer
832 class, thus making it possible to process discontinuous strings.
833
834 16. The two macros PCRE_EXPORT and PCRE_DATA_SCOPE are confusing, and perform
835 much the same function. They were added by different people who were trying
836 to make PCRE easy to compile on non-Unix systems. It has been suggested
837 that PCRE_EXPORT be abolished now that there is more automatic apparatus
838 for compiling on Windows systems. I have therefore replaced it with
839 PCRE_DATA_SCOPE. This is set automatically for Windows; if not set it
840 defaults to "extern" for C or "extern C" for C++, which works fine on
841 Unix-like systems. It is now possible to override the value of PCRE_DATA_
842 SCOPE with something explicit in config.h. In addition:
843
844 (a) pcreposix.h still had just "extern" instead of either of these macros;
845 I have replaced it with PCRE_DATA_SCOPE.
846
847 (b) Functions such as _pcre_xclass(), which are internal to the library,
848 but external in the C sense, all had PCRE_EXPORT in their definitions.
849 This is apparently wrong for the Windows case, so I have removed it.
850 (It makes no difference on Unix-like systems.)
851
852 17. Added a new limit, MATCH_LIMIT_RECURSION, which limits the depth of nesting
853 of recursive calls to match(). This is different to MATCH_LIMIT because
854 that limits the total number of calls to match(), not all of which increase
855 the depth of recursion. Limiting the recursion depth limits the amount of
856 stack (or heap if NO_RECURSE is set) that is used. The default can be set
857 when PCRE is compiled, and changed at run time. A patch from Google adds
858 this functionality to the C++ interface.
859
860 18. Changes to the handling of Unicode character properties:
861
862 (a) Updated the table to Unicode 4.1.0.
863
864 (b) Recognize characters that are not in the table as "Cn" (undefined).
865
866 (c) I revised the way the table is implemented to a much improved format
867 which includes recognition of ranges. It now supports the ranges that
868 are defined in UnicodeData.txt, and it also amalgamates other
869 characters into ranges. This has reduced the number of entries in the
870 table from around 16,000 to around 3,000, thus reducing its size
871 considerably. I realized I did not need to use a tree structure after
872 all - a binary chop search is just as efficient. Having reduced the
873 number of entries, I extended their size from 6 bytes to 8 bytes to
874 allow for more data.
875
876 (d) Added support for Unicode script names via properties such as \p{Han}.
877
878 19. In UTF-8 mode, a backslash followed by a non-Ascii character was not
879 matching that character.
880
881 20. When matching a repeated Unicode property with a minimum greater than zero,
882 (for example \pL{2,}), PCRE could look past the end of the subject if it
883 reached it while seeking the minimum number of characters. This could
884 happen only if some of the characters were more than one byte long, because
885 there is a check for at least the minimum number of bytes.
886
887 21. Refactored the implementation of \p and \P so as to be more general, to
888 allow for more different types of property in future. This has changed the
889 compiled form incompatibly. Anybody with saved compiled patterns that use
890 \p or \P will have to recompile them.
891
892 22. Added "Any" and "L&" to the supported property types.
893
894 23. Recognize \x{...} as a code point specifier, even when not in UTF-8 mode,
895 but give a compile time error if the value is greater than 0xff.
896
897 24. The man pages for pcrepartial, pcreprecompile, and pcre_compile2 were
898 accidentally not being installed or uninstalled.
899
900 25. The pcre.h file was built from pcre.h.in, but the only changes that were
901 made were to insert the current release number. This seemed silly, because
902 it made things harder for people building PCRE on systems that don't run
903 "configure". I have turned pcre.h into a distributed file, no longer built
904 by "configure", with the version identification directly included. There is
905 no longer a pcre.h.in file.
906
907 However, this change necessitated a change to the pcre-config script as
908 well. It is built from pcre-config.in, and one of the substitutions was the
909 release number. I have updated configure.ac so that ./configure now finds
910 the release number by grepping pcre.h.
911
912 26. Added the ability to run the tests under valgrind.
913
914
915 Version 6.4 05-Sep-05
916 ---------------------
917
918 1. Change 6.0/10/(l) to pcregrep introduced a bug that caused separator lines
919 "--" to be printed when multiple files were scanned, even when none of the
920 -A, -B, or -C options were used. This is not compatible with Gnu grep, so I
921 consider it to be a bug, and have restored the previous behaviour.
922
923 2. A couple of code tidies to get rid of compiler warnings.
924
925 3. The pcretest program used to cheat by referring to symbols in the library
926 whose names begin with _pcre_. These are internal symbols that are not
927 really supposed to be visible externally, and in some environments it is
928 possible to suppress them. The cheating is now confined to including
929 certain files from the library's source, which is a bit cleaner.
930
931 4. Renamed pcre.in as pcre.h.in to go with pcrecpp.h.in; it also makes the
932 file's purpose clearer.
933
934 5. Reorganized pcre_ucp_findchar().
935
936
937 Version 6.3 15-Aug-05
938 ---------------------
939
940 1. The file libpcre.pc.in did not have general read permission in the tarball.
941
942 2. There were some problems when building without C++ support:
943
944 (a) If C++ support was not built, "make install" and "make test" still
945 tried to test it.
946
947 (b) There were problems when the value of CXX was explicitly set. Some
948 changes have been made to try to fix these, and ...
949
950 (c) --disable-cpp can now be used to explicitly disable C++ support.
951
952 (d) The use of @CPP_OBJ@ directly caused a blank line preceded by a
953 backslash in a target when C++ was disabled. This confuses some
954 versions of "make", apparently. Using an intermediate variable solves
955 this. (Same for CPP_LOBJ.)
956
957 3. $(LINK_FOR_BUILD) now includes $(CFLAGS_FOR_BUILD) and $(LINK)
958 (non-Windows) now includes $(CFLAGS) because these flags are sometimes
959 necessary on certain architectures.
960
961 4. Added a setting of -export-symbols-regex to the link command to remove
962 those symbols that are exported in the C sense, but actually are local
963 within the library, and not documented. Their names all begin with
964 "_pcre_". This is not a perfect job, because (a) we have to except some
965 symbols that pcretest ("illegally") uses, and (b) the facility isn't always
966 available (and never for static libraries). I have made a note to try to
967 find a way round (a) in the future.
968
969
970 Version 6.2 01-Aug-05
971 ---------------------
972
973 1. There was no test for integer overflow of quantifier values. A construction
974 such as {1111111111111111} would give undefined results. What is worse, if
975 a minimum quantifier for a parenthesized subpattern overflowed and became
976 negative, the calculation of the memory size went wrong. This could have
977 led to memory overwriting.
978
979 2. Building PCRE using VPATH was broken. Hopefully it is now fixed.
980
981 3. Added "b" to the 2nd argument of fopen() in dftables.c, for non-Unix-like
982 operating environments where this matters.
983
984 4. Applied Giuseppe Maxia's patch to add additional features for controlling
985 PCRE options from within the C++ wrapper.
986
987 5. Named capturing subpatterns were not being correctly counted when a pattern
988 was compiled. This caused two problems: (a) If there were more than 100
989 such subpatterns, the calculation of the memory needed for the whole
990 compiled pattern went wrong, leading to an overflow error. (b) Numerical
991 back references of the form \12, where the number was greater than 9, were
992 not recognized as back references, even though there were sufficient
993 previous subpatterns.
994
995 6. Two minor patches to pcrecpp.cc in order to allow it to compile on older
996 versions of gcc, e.g. 2.95.4.
997
998
999 Version 6.1 21-Jun-05
1000 ---------------------
1001
1002 1. There was one reference to the variable "posix" in pcretest.c that was not
1003 surrounded by "#if !defined NOPOSIX".
1004
1005 2. Make it possible to compile pcretest without DFA support, UTF8 support, or
1006 the cross-check on the old pcre_info() function, for the benefit of the
1007 cut-down version of PCRE that is currently imported into Exim.
1008
1009 3. A (silly) pattern starting with (?i)(?-i) caused an internal space
1010 allocation error. I've done the easy fix, which wastes 2 bytes for sensible
1011 patterns that start (?i) but I don't think that matters. The use of (?i) is
1012 just an example; this all applies to the other options as well.
1013
1014 4. Since libtool seems to echo the compile commands it is issuing, the output
1015 from "make" can be reduced a bit by putting "@" in front of each libtool
1016 compile command.
1017
1018 5. Patch from the folks at Google for configure.in to be a bit more thorough
1019 in checking for a suitable C++ installation before trying to compile the
1020 C++ stuff. This should fix a reported problem when a compiler was present,
1021 but no suitable headers.
1022
1023 6. The man pages all had just "PCRE" as their title. I have changed them to
1024 be the relevant file name. I have also arranged that these names are
1025 retained in the file doc/pcre.txt, which is a concatenation in text format
1026 of all the man pages except the little individual ones for each function.
1027
1028 7. The NON-UNIX-USE file had not been updated for the different set of source
1029 files that come with release 6. I also added a few comments about the C++
1030 wrapper.
1031
1032
1033 Version 6.0 07-Jun-05
1034 ---------------------
1035
1036 1. Some minor internal re-organization to help with my DFA experiments.
1037
1038 2. Some missing #ifdef SUPPORT_UCP conditionals in pcretest and printint that
1039 didn't matter for the library itself when fully configured, but did matter
1040 when compiling without UCP support, or within Exim, where the ucp files are
1041 not imported.
1042
1043 3. Refactoring of the library code to split up the various functions into
1044 different source modules. The addition of the new DFA matching code (see
1045 below) to a single monolithic source would have made it really too
1046 unwieldy, quite apart from causing all the code to be include in a
1047 statically linked application, when only some functions are used. This is
1048 relevant even without the DFA addition now that patterns can be compiled in
1049 one application and matched in another.
1050
1051 The downside of splitting up is that there have to be some external
1052 functions and data tables that are used internally in different modules of
1053 the library but which are not part of the API. These have all had their
1054 names changed to start with "_pcre_" so that they are unlikely to clash
1055 with other external names.
1056
1057 4. Added an alternate matching function, pcre_dfa_exec(), which matches using
1058 a different (DFA) algorithm. Although it is slower than the original
1059 function, it does have some advantages for certain types of matching
1060 problem.
1061
1062 5. Upgrades to pcretest in order to test the features of pcre_dfa_exec(),
1063 including restarting after a partial match.
1064
1065 6. A patch for pcregrep that defines INVALID_FILE_ATTRIBUTES if it is not
1066 defined when compiling for Windows was sent to me. I have put it into the
1067 code, though I have no means of testing or verifying it.
1068
1069 7. Added the pcre_refcount() auxiliary function.
1070
1071 8. Added the PCRE_FIRSTLINE option. This constrains an unanchored pattern to
1072 match before or at the first newline in the subject string. In pcretest,
1073 the /f option on a pattern can be used to set this.
1074
1075 9. A repeated \w when used in UTF-8 mode with characters greater than 256
1076 would behave wrongly. This has been present in PCRE since release 4.0.
1077
1078 10. A number of changes to the pcregrep command:
1079
1080 (a) Refactored how -x works; insert ^(...)$ instead of setting
1081 PCRE_ANCHORED and checking the length, in preparation for adding
1082 something similar for -w.
1083
1084 (b) Added the -w (match as a word) option.
1085
1086 (c) Refactored the way lines are read and buffered so as to have more
1087 than one at a time available.
1088
1089 (d) Implemented a pcregrep test script.
1090
1091 (e) Added the -M (multiline match) option. This allows patterns to match
1092 over several lines of the subject. The buffering ensures that at least
1093 8K, or the rest of the document (whichever is the shorter) is available
1094 for matching (and similarly the previous 8K for lookbehind assertions).
1095
1096 (f) Changed the --help output so that it now says
1097
1098 -w, --word-regex(p)
1099
1100 instead of two lines, one with "regex" and the other with "regexp"
1101 because that confused at least one person since the short forms are the
1102 same. (This required a bit of code, as the output is generated
1103 automatically from a table. It wasn't just a text change.)
1104
1105 (g) -- can be used to terminate pcregrep options if the next thing isn't an
1106 option but starts with a hyphen. Could be a pattern or a path name
1107 starting with a hyphen, for instance.
1108
1109 (h) "-" can be given as a file name to represent stdin.
1110
1111 (i) When file names are being printed, "(standard input)" is used for
1112 the standard input, for compatibility with GNU grep. Previously
1113 "<stdin>" was used.
1114
1115 (j) The option --label=xxx can be used to supply a name to be used for
1116 stdin when file names are being printed. There is no short form.
1117
1118 (k) Re-factored the options decoding logic because we are going to add
1119 two more options that take data. Such options can now be given in four
1120 different ways, e.g. "-fname", "-f name", "--file=name", "--file name".
1121
1122 (l) Added the -A, -B, and -C options for requesting that lines of context
1123 around matches be printed.
1124
1125 (m) Added the -L option to print the names of files that do not contain
1126 any matching lines, that is, the complement of -l.
1127
1128 (n) The return code is 2 if any file cannot be opened, but pcregrep does
1129 continue to scan other files.
1130
1131 (o) The -s option was incorrectly implemented. For compatibility with other
1132 greps, it now suppresses the error message for a non-existent or non-
1133 accessible file (but not the return code). There is a new option called
1134 -q that suppresses the output of matching lines, which was what -s was
1135 previously doing.
1136
1137 (p) Added --include and --exclude options to specify files for inclusion
1138 and exclusion when recursing.
1139
1140 11. The Makefile was not using the Autoconf-supported LDFLAGS macro properly.
1141 Hopefully, it now does.
1142
1143 12. Missing cast in pcre_study().
1144
1145 13. Added an "uninstall" target to the makefile.
1146
1147 14. Replaced "extern" in the function prototypes in Makefile.in with
1148 "PCRE_DATA_SCOPE", which defaults to 'extern' or 'extern "C"' in the Unix
1149 world, but is set differently for Windows.
1150
1151 15. Added a second compiling function called pcre_compile2(). The only
1152 difference is that it has an extra argument, which is a pointer to an
1153 integer error code. When there is a compile-time failure, this is set
1154 non-zero, in addition to the error test pointer being set to point to an
1155 error message. The new argument may be NULL if no error number is required
1156 (but then you may as well call pcre_compile(), which is now just a
1157 wrapper). This facility is provided because some applications need a
1158 numeric error indication, but it has also enabled me to tidy up the way
1159 compile-time errors are handled in the POSIX wrapper.
1160
1161 16. Added VPATH=.libs to the makefile; this should help when building with one
1162 prefix path and installing with another. (Or so I'm told by someone who
1163 knows more about this stuff than I do.)
1164
1165 17. Added a new option, REG_DOTALL, to the POSIX function regcomp(). This
1166 passes PCRE_DOTALL to the pcre_compile() function, making the "." character
1167 match everything, including newlines. This is not POSIX-compatible, but
1168 somebody wanted the feature. From pcretest it can be activated by using
1169 both the P and the s flags.
1170
1171 18. AC_PROG_LIBTOOL appeared twice in Makefile.in. Removed one.
1172
1173 19. libpcre.pc was being incorrectly installed as executable.
1174
1175 20. A couple of places in pcretest check for end-of-line by looking for '\n';
1176 it now also looks for '\r' so that it will work unmodified on Windows.
1177
1178 21. Added Google's contributed C++ wrapper to the distribution.
1179
1180 22. Added some untidy missing memory free() calls in pcretest, to keep
1181 Electric Fence happy when testing.
1182
1183
1184
1185 Version 5.0 13-Sep-04
1186 ---------------------
1187
1188 1. Internal change: literal characters are no longer packed up into items
1189 containing multiple characters in a single byte-string. Each character
1190 is now matched using a separate opcode. However, there may be more than one
1191 byte in the character in UTF-8 mode.
1192
1193 2. The pcre_callout_block structure has two new fields: pattern_position and
1194 next_item_length. These contain the offset in the pattern to the next match
1195 item, and its length, respectively.
1196
1197 3. The PCRE_AUTO_CALLOUT option for pcre_compile() requests the automatic
1198 insertion of callouts before each pattern item. Added the /C option to
1199 pcretest to make use of this.
1200
1201 4. On the advice of a Windows user, the lines
1202
1203 #if defined(_WIN32) || defined(WIN32)
1204 _setmode( _fileno( stdout ), 0x8000 );
1205 #endif /* defined(_WIN32) || defined(WIN32) */
1206
1207 have been added to the source of pcretest. This apparently does useful
1208 magic in relation to line terminators.
1209
1210 5. Changed "r" and "w" in the calls to fopen() in pcretest to "rb" and "wb"
1211 for the benefit of those environments where the "b" makes a difference.
1212
1213 6. The icc compiler has the same options as gcc, but "configure" doesn't seem
1214 to know about it. I have put a hack into configure.in that adds in code
1215 to set GCC=yes if CC=icc. This seems to end up at a point in the
1216 generated configure script that is early enough to affect the setting of
1217 compiler options, which is what is needed, but I have no means of testing
1218 whether it really works. (The user who reported this had patched the
1219 generated configure script, which of course I cannot do.)
1220
1221 LATER: After change 22 below (new libtool files), the configure script
1222 seems to know about icc (and also ecc). Therefore, I have commented out
1223 this hack in configure.in.
1224
1225 7. Added support for pkg-config (2 patches were sent in).
1226
1227 8. Negated POSIX character classes that used a combination of internal tables
1228 were completely broken. These were [[:^alpha:]], [[:^alnum:]], and
1229 [[:^ascii]]. Typically, they would match almost any characters. The other
1230 POSIX classes were not broken in this way.
1231
1232 9. Matching the pattern "\b.*?" against "ab cd", starting at offset 1, failed
1233 to find the match, as PCRE was deluded into thinking that the match had to
1234 start at the start point or following a newline. The same bug applied to
1235 patterns with negative forward assertions or any backward assertions
1236 preceding ".*" at the start, unless the pattern required a fixed first
1237 character. This was a failing pattern: "(?!.bcd).*". The bug is now fixed.
1238
1239 10. In UTF-8 mode, when moving forwards in the subject after a failed match
1240 starting at the last subject character, bytes beyond the end of the subject
1241 string were read.
1242
1243 11. Renamed the variable "class" as "classbits" to make life easier for C++
1244 users. (Previously there was a macro definition, but it apparently wasn't
1245 enough.)
1246
1247 12. Added the new field "tables" to the extra data so that tables can be passed
1248 in at exec time, or the internal tables can be re-selected. This allows
1249 a compiled regex to be saved and re-used at a later time by a different
1250 program that might have everything at different addresses.
1251
1252 13. Modified the pcre-config script so that, when run on Solaris, it shows a
1253 -R library as well as a -L library.
1254
1255 14. The debugging options of pcretest (-d on the command line or D on a
1256 pattern) showed incorrect output for anything following an extended class
1257 that contained multibyte characters and which was followed by a quantifier.
1258
1259 15. Added optional support for general category Unicode character properties
1260 via the \p, \P, and \X escapes. Unicode property support implies UTF-8
1261 support. It adds about 90K to the size of the library. The meanings of the
1262 inbuilt class escapes such as \d and \s have NOT been changed.
1263
1264 16. Updated pcredemo.c to include calls to free() to release the memory for the
1265 compiled pattern.
1266
1267 17. The generated file chartables.c was being created in the source directory
1268 instead of in the building directory. This caused the build to fail if the
1269 source directory was different from the building directory, and was
1270 read-only.
1271
1272 18. Added some sample Win commands from Mark Tetrode into the NON-UNIX-USE
1273 file. No doubt somebody will tell me if they don't make sense... Also added
1274 Dan Mooney's comments about building on OpenVMS.
1275
1276 19. Added support for partial matching via the PCRE_PARTIAL option for
1277 pcre_exec() and the \P data escape in pcretest.
1278
1279 20. Extended pcretest with 3 new pattern features:
1280
1281 (i) A pattern option of the form ">rest-of-line" causes pcretest to
1282 write the compiled pattern to the file whose name is "rest-of-line".
1283 This is a straight binary dump of the data, with the saved pointer to
1284 the character tables forced to be NULL. The study data, if any, is
1285 written too. After writing, pcretest reads a new pattern.
1286
1287 (ii) If, instead of a pattern, "<rest-of-line" is given, pcretest reads a
1288 compiled pattern from the given file. There must not be any
1289 occurrences of "<" in the file name (pretty unlikely); if there are,
1290 pcretest will instead treat the initial "<" as a pattern delimiter.
1291 After reading in the pattern, pcretest goes on to read data lines as
1292 usual.
1293
1294 (iii) The F pattern option causes pcretest to flip the bytes in the 32-bit
1295 and 16-bit fields in a compiled pattern, to simulate a pattern that
1296 was compiled on a host of opposite endianness.
1297
1298 21. The pcre-exec() function can now cope with patterns that were compiled on
1299 hosts of opposite endianness, with this restriction:
1300
1301 As for any compiled expression that is saved and used later, the tables
1302 pointer field cannot be preserved; the extra_data field in the arguments
1303 to pcre_exec() should be used to pass in a tables address if a value
1304 other than the default internal tables were used at compile time.
1305
1306 22. Calling pcre_exec() with a negative value of the "ovecsize" parameter is
1307 now diagnosed as an error. Previously, most of the time, a negative number
1308 would have been treated as zero, but if in addition "ovector" was passed as
1309 NULL, a crash could occur.
1310
1311 23. Updated the files ltmain.sh, config.sub, config.guess, and aclocal.m4 with
1312 new versions from the libtool 1.5 distribution (the last one is a copy of
1313 a file called libtool.m4). This seems to have fixed the need to patch
1314 "configure" to support Darwin 1.3 (which I used to do). However, I still
1315 had to patch ltmain.sh to ensure that ${SED} is set (it isn't on my
1316 workstation).
1317
1318 24. Changed the PCRE licence to be the more standard "BSD" licence.
1319
1320
1321 Version 4.5 01-Dec-03
1322 ---------------------
1323
1324 1. There has been some re-arrangement of the code for the match() function so
1325 that it can be compiled in a version that does not call itself recursively.
1326 Instead, it keeps those local variables that need separate instances for
1327 each "recursion" in a frame on the heap, and gets/frees frames whenever it
1328 needs to "recurse". Keeping track of where control must go is done by means
1329 of setjmp/longjmp. The whole thing is implemented by a set of macros that
1330 hide most of the details from the main code, and operates only if
1331 NO_RECURSE is defined while compiling pcre.c. If PCRE is built using the
1332 "configure" mechanism, "--disable-stack-for-recursion" turns on this way of
1333 operating.
1334
1335 To make it easier for callers to provide specially tailored get/free
1336 functions for this usage, two new functions, pcre_stack_malloc, and
1337 pcre_stack_free, are used. They are always called in strict stacking order,
1338 and the size of block requested is always the same.
1339
1340 The PCRE_CONFIG_STACKRECURSE info parameter can be used to find out whether
1341 PCRE has been compiled to use the stack or the heap for recursion. The
1342 -C option of pcretest uses this to show which version is compiled.
1343
1344 A new data escape \S, is added to pcretest; it causes the amounts of store
1345 obtained and freed by both kinds of malloc/free at match time to be added
1346 to the output.
1347
1348 2. Changed the locale test to use "fr_FR" instead of "fr" because that's
1349 what's available on my current Linux desktop machine.
1350
1351 3. When matching a UTF-8 string, the test for a valid string at the start has
1352 been extended. If start_offset is not zero, PCRE now checks that it points
1353 to a byte that is the start of a UTF-8 character. If not, it returns
1354 PCRE_ERROR_BADUTF8_OFFSET (-11). Note: the whole string is still checked;
1355 this is necessary because there may be backward assertions in the pattern.
1356 When matching the same subject several times, it may save resources to use
1357 PCRE_NO_UTF8_CHECK on all but the first call if the string is long.
1358
1359 4. The code for checking the validity of UTF-8 strings has been tightened so
1360 that it rejects (a) strings containing 0xfe or 0xff bytes and (b) strings
1361 containing "overlong sequences".
1362
1363 5. Fixed a bug (appearing twice) that I could not find any way of exploiting!
1364 I had written "if ((digitab[*p++] && chtab_digit) == 0)" where the "&&"
1365 should have been "&", but it just so happened that all the cases this let
1366 through by mistake were picked up later in the function.
1367
1368 6. I had used a variable called "isblank" - this is a C99 function, causing
1369 some compilers to warn. To avoid this, I renamed it (as "blankclass").
1370
1371 7. Cosmetic: (a) only output another newline at the end of pcretest if it is
1372 prompting; (b) run "./pcretest /dev/null" at the start of the test script
1373 so the version is shown; (c) stop "make test" echoing "./RunTest".
1374
1375 8. Added patches from David Burgess to enable PCRE to run on EBCDIC systems.
1376
1377 9. The prototype for memmove() for systems that don't have it was using
1378 size_t, but the inclusion of the header that defines size_t was later. I've
1379 moved the #includes for the C headers earlier to avoid this.
1380
1381 10. Added some adjustments to the code to make it easier to compiler on certain
1382 special systems:
1383
1384 (a) Some "const" qualifiers were missing.
1385 (b) Added the macro EXPORT before all exported functions; by default this
1386 is defined to be empty.
1387 (c) Changed the dftables auxiliary program (that builds chartables.c) so
1388 that it reads its output file name as an argument instead of writing
1389 to the standard output and assuming this can be redirected.
1390
1391 11. In UTF-8 mode, if a recursive reference (e.g. (?1)) followed a character
1392 class containing characters with values greater than 255, PCRE compilation
1393 went into a loop.
1394
1395 12. A recursive reference to a subpattern that was within another subpattern
1396 that had a minimum quantifier of zero caused PCRE to crash. For example,
1397 (x(y(?2))z)? provoked this bug with a subject that got as far as the
1398 recursion. If the recursively-called subpattern itself had a zero repeat,
1399 that was OK.
1400
1401 13. In pcretest, the buffer for reading a data line was set at 30K, but the
1402 buffer into which it was copied (for escape processing) was still set at
1403 1024, so long lines caused crashes.
1404
1405 14. A pattern such as /[ab]{1,3}+/ failed to compile, giving the error
1406 "internal error: code overflow...". This applied to any character class
1407 that was followed by a possessive quantifier.
1408
1409 15. Modified the Makefile to add libpcre.la as a prerequisite for
1410 libpcreposix.la because I was told this is needed for a parallel build to
1411 work.
1412
1413 16. If a pattern that contained .* following optional items at the start was
1414 studied, the wrong optimizing data was generated, leading to matching
1415 errors. For example, studying /[ab]*.*c/ concluded, erroneously, that any
1416 matching string must start with a or b or c. The correct conclusion for
1417 this pattern is that a match can start with any character.
1418
1419
1420 Version 4.4 13-Aug-03
1421 ---------------------
1422
1423 1. In UTF-8 mode, a character class containing characters with values between
1424 127 and 255 was not handled correctly if the compiled pattern was studied.
1425 In fixing this, I have also improved the studying algorithm for such
1426 classes (slightly).
1427
1428 2. Three internal functions had redundant arguments passed to them. Removal
1429 might give a very teeny performance improvement.
1430
1431 3. Documentation bug: the value of the capture_top field in a callout is *one
1432 more than* the number of the hightest numbered captured substring.
1433
1434 4. The Makefile linked pcretest and pcregrep with -lpcre, which could result
1435 in incorrectly linking with a previously installed version. They now link
1436 explicitly with libpcre.la.
1437
1438 5. configure.in no longer needs to recognize Cygwin specially.
1439
1440 6. A problem in pcre.in for Windows platforms is fixed.
1441
1442 7. If a pattern was successfully studied, and the -d (or /D) flag was given to
1443 pcretest, it used to include the size of the study block as part of its
1444 output. Unfortunately, the structure contains a field that has a different
1445 size on different hardware architectures. This meant that the tests that
1446 showed this size failed. As the block is currently always of a fixed size,
1447 this information isn't actually particularly useful in pcretest output, so
1448 I have just removed it.
1449
1450 8. Three pre-processor statements accidentally did not start in column 1.
1451 Sadly, there are *still* compilers around that complain, even though
1452 standard C has not required this for well over a decade. Sigh.
1453
1454 9. In pcretest, the code for checking callouts passed small integers in the
1455 callout_data field, which is a void * field. However, some picky compilers
1456 complained about the casts involved for this on 64-bit systems. Now
1457 pcretest passes the address of the small integer instead, which should get
1458 rid of the warnings.
1459
1460 10. By default, when in UTF-8 mode, PCRE now checks for valid UTF-8 strings at
1461 both compile and run time, and gives an error if an invalid UTF-8 sequence
1462 is found. There is a option for disabling this check in cases where the
1463 string is known to be correct and/or the maximum performance is wanted.
1464
1465 11. In response to a bug report, I changed one line in Makefile.in from
1466
1467 -Wl,--out-implib,.libs/lib@WIN_PREFIX@pcreposix.dll.a \
1468 to
1469 -Wl,--out-implib,.libs/@WIN_PREFIX@libpcreposix.dll.a \
1470
1471 to look similar to other lines, but I have no way of telling whether this
1472 is the right thing to do, as I do not use Windows. No doubt I'll get told
1473 if it's wrong...
1474
1475
1476 Version 4.3 21-May-03
1477 ---------------------
1478
1479 1. Two instances of @WIN_PREFIX@ omitted from the Windows targets in the
1480 Makefile.
1481
1482 2. Some refactoring to improve the quality of the code:
1483
1484 (i) The utf8_table... variables are now declared "const".
1485
1486 (ii) The code for \cx, which used the "case flipping" table to upper case
1487 lower case letters, now just substracts 32. This is ASCII-specific,
1488 but the whole concept of \cx is ASCII-specific, so it seems
1489 reasonable.
1490
1491 (iii) PCRE was using its character types table to recognize decimal and
1492 hexadecimal digits in the pattern. This is silly, because it handles
1493 only 0-9, a-f, and A-F, but the character types table is locale-
1494 specific, which means strange things might happen. A private
1495 table is now used for this - though it costs 256 bytes, a table is
1496 much faster than multiple explicit tests. Of course, the standard
1497 character types table is still used for matching digits in subject
1498 strings against \d.
1499
1500 (iv) Strictly, the identifier ESC_t is reserved by POSIX (all identifiers
1501 ending in _t are). So I've renamed it as ESC_tee.
1502
1503 3. The first argument for regexec() in the POSIX wrapper should have been
1504 defined as "const".
1505
1506 4. Changed pcretest to use malloc() for its buffers so that they can be
1507 Electric Fenced for debugging.
1508
1509 5. There were several places in the code where, in UTF-8 mode, PCRE would try
1510 to read one or more bytes before the start of the subject string. Often this
1511 had no effect on PCRE's behaviour, but in some circumstances it could
1512 provoke a segmentation fault.
1513
1514 6. A lookbehind at the start of a pattern in UTF-8 mode could also cause PCRE
1515 to try to read one or more bytes before the start of the subject string.
1516
1517 7. A lookbehind in a pattern matched in non-UTF-8 mode on a PCRE compiled with
1518 UTF-8 support could misbehave in various ways if the subject string
1519 contained bytes with the 0x80 bit set and the 0x40 bit unset in a lookbehind
1520 area. (PCRE was not checking for the UTF-8 mode flag, and trying to move
1521 back over UTF-8 characters.)
1522
1523
1524 Version 4.2 14-Apr-03
1525 ---------------------
1526
1527 1. Typo "#if SUPPORT_UTF8" instead of "#ifdef SUPPORT_UTF8" fixed.
1528
1529 2. Changes to the building process, supplied by Ronald Landheer-Cieslak
1530 [ON_WINDOWS]: new variable, "#" on non-Windows platforms
1531 [NOT_ON_WINDOWS]: new variable, "#" on Windows platforms
1532 [WIN_PREFIX]: new variable, "cyg" for Cygwin
1533 * Makefile.in: use autoconf substitution for OBJEXT, EXEEXT, BUILD_OBJEXT
1534 and BUILD_EXEEXT
1535 Note: automatic setting of the BUILD variables is not yet working
1536 set CPPFLAGS and BUILD_CPPFLAGS (but don't use yet) - should be used at
1537 compile-time but not at link-time
1538 [LINK]: use for linking executables only
1539 make different versions for Windows and non-Windows
1540 [LINKLIB]: new variable, copy of UNIX-style LINK, used for linking
1541 libraries
1542 [LINK_FOR_BUILD]: new variable
1543 [OBJEXT]: use throughout
1544 [EXEEXT]: use throughout
1545 <winshared>: new target
1546 <wininstall>: new target
1547 <dftables.o>: use native compiler
1548 <dftables>: use native linker
1549 <install>: handle Windows platform correctly
1550 <clean>: ditto
1551 <check>: ditto
1552 copy DLL to top builddir before testing
1553
1554 As part of these changes, -no-undefined was removed again. This was reported
1555 to give trouble on HP-UX 11.0, so getting rid of it seems like a good idea
1556 in any case.
1557
1558 3. Some tidies to get rid of compiler warnings:
1559
1560 . In the match_data structure, match_limit was an unsigned long int, whereas
1561 match_call_count was an int. I've made them both unsigned long ints.
1562
1563 . In pcretest the fact that a const uschar * doesn't automatically cast to
1564 a void * provoked a warning.
1565
1566 . Turning on some more compiler warnings threw up some "shadow" variables
1567 and a few more missing casts.
1568
1569 4. If PCRE was complied with UTF-8 support, but called without the PCRE_UTF8
1570 option, a class that contained a single character with a value between 128
1571 and 255 (e.g. /[\xFF]/) caused PCRE to crash.
1572
1573 5. If PCRE was compiled with UTF-8 support, but called without the PCRE_UTF8
1574 option, a class that contained several characters, but with at least one
1575 whose value was between 128 and 255 caused PCRE to crash.
1576
1577
1578 Version 4.1 12-Mar-03
1579 ---------------------
1580
1581 1. Compiling with gcc -pedantic found a couple of places where casts were
1582 needed, and a string in dftables.c that was longer than standard compilers are
1583 required to support.
1584
1585 2. Compiling with Sun's compiler found a few more places where the code could
1586 be tidied up in order to avoid warnings.
1587
1588 3. The variables for cross-compiling were called HOST_CC and HOST_CFLAGS; the
1589 first of these names is deprecated in the latest Autoconf in favour of the name
1590 CC_FOR_BUILD, because "host" is typically used to mean the system on which the
1591 compiled code will be run. I can't find a reference for HOST_CFLAGS, but by
1592 analogy I have changed it to CFLAGS_FOR_BUILD.
1593
1594 4. Added -no-undefined to the linking command in the Makefile, because this is
1595 apparently helpful for Windows. To make it work, also added "-L. -lpcre" to the
1596 linking step for the pcreposix library.
1597
1598 5. PCRE was failing to diagnose the case of two named groups with the same
1599 name.
1600
1601 6. A problem with one of PCRE's optimizations was discovered. PCRE remembers a
1602 literal character that is needed in the subject for a match, and scans along to
1603 ensure that it is present before embarking on the full matching process. This
1604 saves time in cases of nested unlimited repeats that are never going to match.
1605 Problem: the scan can take a lot of time if the subject is very long (e.g.
1606 megabytes), thus penalizing straightforward matches. It is now done only if the
1607 amount of subject to be scanned is less than 1000 bytes.
1608
1609 7. A lesser problem with the same optimization is that it was recording the
1610 first character of an anchored pattern as "needed", thus provoking a search
1611 right along the subject, even when the first match of the pattern was going to
1612 fail. The "needed" character is now not set for anchored patterns, unless it
1613 follows something in the pattern that is of non-fixed length. Thus, it still
1614 fulfils its original purpose of finding quick non-matches in cases of nested
1615 unlimited repeats, but isn't used for simple anchored patterns such as /^abc/.
1616
1617
1618 Version 4.0 17-Feb-03
1619 ---------------------
1620
1621 1. If a comment in an extended regex that started immediately after a meta-item
1622 extended to the end of string, PCRE compiled incorrect data. This could lead to
1623 all kinds of weird effects. Example: /#/ was bad; /()#/ was bad; /a#/ was not.
1624
1625 2. Moved to autoconf 2.53 and libtool 1.4.2.
1626
1627 3. Perl 5.8 no longer needs "use utf8" for doing UTF-8 things. Consequently,
1628 the special perltest8 script is no longer needed - all the tests can be run
1629 from a single perltest script.
1630
1631 4. From 5.004, Perl has not included the VT character (0x0b) in the set defined
1632 by \s. It has now been removed in PCRE. This means it isn't recognized as
1633 whitespace in /x regexes too, which is the same as Perl. Note that the POSIX
1634 class [:space:] *does* include VT, thereby creating a mess.
1635
1636 5. Added the class [:blank:] (a GNU extension from Perl 5.8) to match only
1637 space and tab.
1638
1639 6. Perl 5.005 was a long time ago. It's time to amalgamate the tests that use
1640 its new features into the main test script, reducing the number of scripts.
1641
1642 7. Perl 5.8 has changed the meaning of patterns like /a(?i)b/. Earlier versions
1643 were backward compatible, and made the (?i) apply to the whole pattern, as if
1644 /i were given. Now it behaves more logically, and applies the option setting
1645 only to what follows. PCRE has been changed to follow suit. However, if it
1646 finds options settings right at the start of the pattern, it extracts them into
1647 the global options, as before. Thus, they show up in the info data.
1648
1649 8. Added support for the \Q...\E escape sequence. Characters in between are
1650 treated as literals. This is slightly different from Perl in that $ and @ are
1651 also handled as literals inside the quotes. In Perl, they will cause variable
1652 interpolation. Note the following examples:
1653
1654 Pattern PCRE matches Perl matches
1655
1656 \Qabc$xyz\E abc$xyz abc followed by the contents of $xyz
1657 \Qabc\$xyz\E abc\$xyz abc\$xyz
1658 \Qabc\E\$\Qxyz\E abc$xyz abc$xyz
1659
1660 For compatibility with Perl, \Q...\E sequences are recognized inside character
1661 classes as well as outside them.
1662
1663 9. Re-organized 3 code statements in pcretest to avoid "overflow in
1664 floating-point constant arithmetic" warnings from a Microsoft compiler. Added a
1665 (size_t) cast to one statement in pcretest and one in pcreposix to avoid
1666 signed/unsigned warnings.
1667
1668 10. SunOS4 doesn't have strtoul(). This was used only for unpicking the -o
1669 option for pcretest, so I've replaced it by a simple function that does just
1670 that job.
1671
1672 11. pcregrep was ending with code 0 instead of 2 for the commands "pcregrep" or
1673 "pcregrep -".
1674
1675 12. Added "possessive quantifiers" ?+, *+, ++, and {,}+ which come from Sun's
1676 Java package. This provides some syntactic sugar for simple cases of what my
1677 documentation calls "once-only subpatterns". A pattern such as x*+ is the same
1678 as (?>x*). In other words, if what is inside (?>...) is just a single repeated
1679 item, you can use this simplified notation. Note that only makes sense with
1680 greedy quantifiers. Consequently, the use of the possessive quantifier forces
1681 greediness, whatever the setting of the PCRE_UNGREEDY option.
1682
1683 13. A change of greediness default within a pattern was not taking effect at
1684 the current level for patterns like /(b+(?U)a+)/. It did apply to parenthesized
1685 subpatterns that followed. Patterns like /b+(?U)a+/ worked because the option
1686 was abstracted outside.
1687
1688 14. PCRE now supports the \G assertion. It is true when the current matching
1689 position is at the start point of the match. This differs from \A when the
1690 starting offset is non-zero. Used with the /g option of pcretest (or similar
1691 code), it works in the same way as it does for Perl's /g option. If all
1692 alternatives of a regex begin with \G, the expression is anchored to the start
1693 match position, and the "anchored" flag is set in the compiled expression.
1694
1695 15. Some bugs concerning the handling of certain option changes within patterns
1696 have been fixed. These applied to options other than (?ims). For example,
1697 "a(?x: b c )d" did not match "XabcdY" but did match "Xa b c dY". It should have
1698 been the other way round. Some of this was related to change 7 above.
1699
1700 16. PCRE now gives errors for /[.x.]/ and /[=x=]/ as unsupported POSIX
1701 features, as Perl does. Previously, PCRE gave the warnings only for /[[.x.]]/
1702 and /[[=x=]]/. PCRE now also gives an error for /[:name:]/ because it supports
1703 POSIX classes only within a class (e.g. /[[:alpha:]]/).
1704
1705 17. Added support for Perl's \C escape. This matches one byte, even in UTF8
1706 mode. Unlike ".", it always matches newline, whatever the setting of
1707 PCRE_DOTALL. However, PCRE does not permit \C to appear in lookbehind
1708 assertions. Perl allows it, but it doesn't (in general) work because it can't
1709 calculate the length of the lookbehind. At least, that's the case for Perl
1710 5.8.0 - I've been told they are going to document that it doesn't work in
1711 future.
1712
1713 18. Added an error diagnosis for escapes that PCRE does not support: these are
1714 \L, \l, \N, \P, \p, \U, \u, and \X.
1715
1716 19. Although correctly diagnosing a missing ']' in a character class, PCRE was
1717 reading past the end of the pattern in cases such as /[abcd/.
1718
1719 20. PCRE was getting more memory than necessary for patterns with classes that
1720 contained both POSIX named classes and other characters, e.g. /[[:space:]abc/.
1721
1722 21. Added some code, conditional on #ifdef VPCOMPAT, to make life easier for
1723 compiling PCRE for use with Virtual Pascal.
1724
1725 22. Small fix to the Makefile to make it work properly if the build is done
1726 outside the source tree.
1727
1728 23. Added a new extension: a condition to go with recursion. If a conditional
1729 subpattern starts with (?(R) the "true" branch is used if recursion has
1730 happened, whereas the "false" branch is used only at the top level.
1731
1732 24. When there was a very long string of literal characters (over 255 bytes
1733 without UTF support, over 250 bytes with UTF support), the computation of how
1734 much memory was required could be incorrect, leading to segfaults or other
1735 strange effects.
1736
1737 25. PCRE was incorrectly assuming anchoring (either to start of subject or to
1738 start of line for a non-DOTALL pattern) when a pattern started with (.*) and
1739 there was a subsequent back reference to those brackets. This meant that, for
1740 example, /(.*)\d+\1/ failed to match "abc123bc". Unfortunately, it isn't
1741 possible to check for precisely this case. All we can do is abandon the
1742 optimization if .* occurs inside capturing brackets when there are any back
1743 references whatsoever. (See below for a better fix that came later.)
1744
1745 26. The handling of the optimization for finding the first character of a
1746 non-anchored pattern, and for finding a character that is required later in the
1747 match were failing in some cases. This didn't break the matching; it just
1748 failed to optimize when it could. The way this is done has been re-implemented.
1749
1750 27. Fixed typo in error message for invalid (?R item (it said "(?p").
1751
1752 28. Added a new feature that provides some of the functionality that Perl
1753 provides with (?{...}). The facility is termed a "callout". The way it is done
1754 in PCRE is for the caller to provide an optional function, by setting
1755 pcre_callout to its entry point. Like pcre_malloc and pcre_free, this is a
1756 global variable. By default it is unset, which disables all calling out. To get
1757 the function called, the regex must include (?C) at appropriate points. This
1758 is, in fact, equivalent to (?C0), and any number <= 255 may be given with (?C).
1759 This provides a means of identifying different callout points. When PCRE
1760 reaches such a point in the regex, if pcre_callout has been set, the external
1761 function is called. It is provided with data in a structure called
1762 pcre_callout_block, which is defined in pcre.h. If the function returns 0,
1763 matching continues; if it returns a non-zero value, the match at the current
1764 point fails. However, backtracking will occur if possible. [This was changed
1765 later and other features added - see item 49 below.]
1766
1767 29. pcretest is upgraded to test the callout functionality. It provides a
1768 callout function that displays information. By default, it shows the start of
1769 the match and the current position in the text. There are some new data escapes
1770 to vary what happens:
1771
1772 \C+ in addition, show current contents of captured substrings
1773 \C- do not supply a callout function
1774 \C!n return 1 when callout number n is reached
1775 \C!n!m return 1 when callout number n is reached for the mth time
1776
1777 30. If pcregrep was called with the -l option and just a single file name, it
1778 output "<stdin>" if a match was found, instead of the file name.
1779
1780 31. Improve the efficiency of the POSIX API to PCRE. If the number of capturing
1781 slots is less than POSIX_MALLOC_THRESHOLD, use a block on the stack to pass to
1782 pcre_exec(). This saves a malloc/free per call. The default value of
1783 POSIX_MALLOC_THRESHOLD is 10; it can be changed by --with-posix-malloc-threshold
1784 when configuring.
1785
1786 32. The default maximum size of a compiled pattern is 64K. There have been a
1787 few cases of people hitting this limit. The code now uses macros to handle the
1788 storing of links as offsets within the compiled pattern. It defaults to 2-byte
1789 links, but this can be changed to 3 or 4 bytes by --with-link-size when
1790 configuring. Tests 2 and 5 work only with 2-byte links because they output
1791 debugging information about compiled patterns.
1792
1793 33. Internal code re-arrangements:
1794
1795 (a) Moved the debugging function for printing out a compiled regex into
1796 its own source file (printint.c) and used #include to pull it into
1797 pcretest.c and, when DEBUG is defined, into pcre.c, instead of having two
1798 separate copies.
1799
1800 (b) Defined the list of op-code names for debugging as a macro in
1801 internal.h so that it is next to the definition of the opcodes.
1802
1803 (c) Defined a table of op-code lengths for simpler skipping along compiled
1804 code. This is again a macro in internal.h so that it is next to the
1805 definition of the opcodes.
1806
1807 34. Added support for recursive calls to individual subpatterns, along the
1808 lines of Robin Houston's patch (but implemented somewhat differently).
1809
1810 35. Further mods to the Makefile to help Win32. Also, added code to pcregrep to
1811 allow it to read and process whole directories in Win32. This code was
1812 contributed by Lionel Fourquaux; it has not been tested by me.
1813
1814 36. Added support for named subpatterns. The Python syntax (?P<name>...) is
1815 used to name a group. Names consist of alphanumerics and underscores, and must
1816 be unique. Back references use the syntax (?P=name) and recursive calls use
1817 (?P>name) which is a PCRE extension to the Python extension. Groups still have
1818 numbers. The function pcre_fullinfo() can be used after compilation to extract
1819 a name/number map. There are three relevant calls:
1820
1821 PCRE_INFO_NAMEENTRYSIZE yields the size of each entry in the map
1822 PCRE_INFO_NAMECOUNT yields the number of entries
1823 PCRE_INFO_NAMETABLE yields a pointer to the map.
1824
1825 The map is a vector of fixed-size entries. The size of each entry depends on
1826 the length of the longest name used. The first two bytes of each entry are the
1827 group number, most significant byte first. There follows the corresponding
1828 name, zero terminated. The names are in alphabetical order.
1829
1830 37. Make the maximum literal string in the compiled code 250 for the non-UTF-8
1831 case instead of 255. Making it the same both with and without UTF-8 support
1832 means that the same test output works with both.
1833
1834 38. There was a case of malloc(0) in the POSIX testing code in pcretest. Avoid
1835 calling malloc() with a zero argument.
1836
1837 39. Change 25 above had to resort to a heavy-handed test for the .* anchoring
1838 optimization. I've improved things by keeping a bitmap of backreferences with
1839 numbers 1-31 so that if .* occurs inside capturing brackets that are not in
1840 fact referenced, the optimization can be applied. It is unlikely that a
1841 relevant occurrence of .* (i.e. one which might indicate anchoring or forcing
1842 the match to follow \n) will appear inside brackets with a number greater than
1843 31, but if it does, any back reference > 31 suppresses the optimization.
1844
1845 40. Added a new compile-time option PCRE_NO_AUTO_CAPTURE. This has the effect
1846 of disabling numbered capturing parentheses. Any opening parenthesis that is
1847 not followed by ? behaves as if it were followed by ?: but named parentheses
1848 can still be used for capturing (and they will acquire numbers in the usual
1849 way).
1850
1851 41. Redesigned the return codes from the match() function into yes/no/error so
1852 that errors can be passed back from deep inside the nested calls. A malloc
1853 failure while inside a recursive subpattern call now causes the
1854 PCRE_ERROR_NOMEMORY return instead of quietly going wrong.
1855
1856 42. It is now possible to set a limit on the number of times the match()
1857 function is called in a call to pcre_exec(). This facility makes it possible to
1858 limit the amount of recursion and backtracking, though not in a directly
1859 obvious way, because the match() function is used in a number of different
1860 circumstances. The count starts from zero for each position in the subject
1861 string (for non-anchored patterns). The default limit is, for compatibility, a
1862 large number, namely 10 000 000. You can change this in two ways:
1863
1864 (a) When configuring PCRE before making, you can use --with-match-limit=n
1865 to set a default value for the compiled library.
1866
1867 (b) For each call to pcre_exec(), you can pass a pcre_extra block in which
1868 a different value is set. See 45 below.
1869
1870 If the limit is exceeded, pcre_exec() returns PCRE_ERROR_MATCHLIMIT.
1871
1872 43. Added a new function pcre_config(int, void *) to enable run-time extraction
1873 of things that can be changed at compile time. The first argument specifies
1874 what is wanted and the second points to where the information is to be placed.
1875 The current list of available information is:
1876
1877 PCRE_CONFIG_UTF8
1878
1879 The output is an integer that is set to one if UTF-8 support is available;
1880 otherwise it is set to zero.
1881
1882 PCRE_CONFIG_NEWLINE
1883
1884 The output is an integer that it set to the value of the code that is used for
1885 newline. It is either LF (10) or CR (13).
1886
1887 PCRE_CONFIG_LINK_SIZE
1888
1889 The output is an integer that contains the number of bytes used for internal
1890 linkage in compiled expressions. The value is 2, 3, or 4. See item 32 above.
1891
1892 PCRE_CONFIG_POSIX_MALLOC_THRESHOLD
1893
1894 The output is an integer that contains the threshold above which the POSIX
1895 interface uses malloc() for output vectors. See item 31 above.
1896
1897 PCRE_CONFIG_MATCH_LIMIT
1898
1899 The output is an unsigned integer that contains the default limit of the number
1900 of match() calls in a pcre_exec() execution. See 42 above.
1901
1902 44. pcretest has been upgraded by the addition of the -C option. This causes it
1903 to extract all the available output from the new pcre_config() function, and to
1904 output it. The program then exits immediately.
1905
1906 45. A need has arisen to pass over additional data with calls to pcre_exec() in
1907 order to support additional features. One way would have been to define
1908 pcre_exec2() (for example) with extra arguments, but this would not have been
1909 extensible, and would also have required all calls to the original function to
1910 be mapped to the new one. Instead, I have chosen to extend the mechanism that
1911 is used for passing in "extra" data from pcre_study().
1912
1913 The pcre_extra structure is now exposed and defined in pcre.h. It currently
1914 contains the following fields:
1915
1916 flags a bitmap indicating which of the following fields are set
1917 study_data opaque data from pcre_study()
1918 match_limit a way of specifying a limit on match() calls for a specific
1919 call to pcre_exec()
1920 callout_data data for callouts (see 49 below)
1921
1922 The flag bits are also defined in pcre.h, and are
1923
1924 PCRE_EXTRA_STUDY_DATA
1925 PCRE_EXTRA_MATCH_LIMIT
1926 PCRE_EXTRA_CALLOUT_DATA
1927
1928 The pcre_study() function now returns one of these new pcre_extra blocks, with
1929 the actual study data pointed to by the study_data field, and the
1930 PCRE_EXTRA_STUDY_DATA flag set. This can be passed directly to pcre_exec() as
1931 before. That is, this change is entirely upwards-compatible and requires no
1932 change to existing code.
1933
1934 If you want to pass in additional data to pcre_exec(), you can either place it
1935 in a pcre_extra block provided by pcre_study(), or create your own pcre_extra
1936 block.
1937
1938 46. pcretest has been extended to test the PCRE_EXTRA_MATCH_LIMIT feature. If a
1939 data string contains the escape sequence \M, pcretest calls pcre_exec() several
1940 times with different match limits, until it finds the minimum value needed for
1941 pcre_exec() to complete. The value is then output. This can be instructive; for
1942 most simple matches the number is quite small, but for pathological cases it
1943 gets very large very quickly.
1944
1945 47. There's a new option for pcre_fullinfo() called PCRE_INFO_STUDYSIZE. It
1946 returns the size of the data block pointed to by the study_data field in a
1947 pcre_extra block, that is, the value that was passed as the argument to
1948 pcre_malloc() when PCRE was getting memory in which to place the information
1949 created by pcre_study(). The fourth argument should point to a size_t variable.
1950 pcretest has been extended so that this information is shown after a successful
1951 pcre_study() call when information about the compiled regex is being displayed.
1952
1953 48. Cosmetic change to Makefile: there's no need to have / after $(DESTDIR)
1954 because what follows is always an absolute path. (Later: it turns out that this
1955 is more than cosmetic for MinGW, because it doesn't like empty path
1956 components.)
1957
1958 49. Some changes have been made to the callout feature (see 28 above):
1959
1960 (i) A callout function now has three choices for what it returns:
1961
1962 0 => success, carry on matching
1963 > 0 => failure at this point, but backtrack if possible
1964 < 0 => serious error, return this value from pcre_exec()
1965
1966 Negative values should normally be chosen from the set of PCRE_ERROR_xxx
1967 values. In particular, returning PCRE_ERROR_NOMATCH forces a standard
1968 "match failed" error. The error number PCRE_ERROR_CALLOUT is reserved for
1969 use by callout functions. It will never be used by PCRE itself.
1970
1971 (ii) The pcre_extra structure (see 45 above) has a void * field called
1972 callout_data, with corresponding flag bit PCRE_EXTRA_CALLOUT_DATA. The
1973 pcre_callout_block structure has a field of the same name. The contents of
1974 the field passed in the pcre_extra structure are passed to the callout
1975 function in the corresponding field in the callout block. This makes it
1976 easier to use the same callout-containing regex from multiple threads. For
1977 testing, the pcretest program has a new data escape
1978
1979 \C*n pass the number n (may be negative) as callout_data
1980
1981 If the callout function in pcretest receives a non-zero value as
1982 callout_data, it returns that value.
1983
1984 50. Makefile wasn't handling CFLAGS properly when compiling dftables. Also,
1985 there were some redundant $(CFLAGS) in commands that are now specified as
1986 $(LINK), which already includes $(CFLAGS).
1987
1988 51. Extensions to UTF-8 support are listed below. These all apply when (a) PCRE
1989 has been compiled with UTF-8 support *and* pcre_compile() has been compiled
1990 with the PCRE_UTF8 flag. Patterns that are compiled without that flag assume
1991 one-byte characters throughout. Note that case-insensitive matching applies
1992 only to characters whose values are less than 256. PCRE doesn't support the
1993 notion of cases for higher-valued characters.
1994
1995 (i) A character class whose characters are all within 0-255 is handled as
1996 a bit map, and the map is inverted for negative classes. Previously, a
1997 character > 255 always failed to match such a class; however it should
1998 match if the class was a negative one (e.g. [^ab]). This has been fixed.
1999
2000 (ii) A negated character class with a single character < 255 is coded as
2001 "not this character" (OP_NOT). This wasn't working properly when the test
2002 character was multibyte, either singly or repeated.
2003
2004 (iii) Repeats of multibyte characters are now handled correctly in UTF-8
2005 mode, for example: \x{100}{2,3}.
2006
2007 (iv) The character escapes \b, \B, \d, \D, \s, \S, \w, and \W (either
2008 singly or repeated) now correctly test multibyte characters. However,
2009 PCRE doesn't recognize any characters with values greater than 255 as
2010 digits, spaces, or word characters. Such characters always match \D, \S,
2011 and \W, and never match \d, \s, or \w.
2012
2013 (v) Classes may now contain characters and character ranges with values
2014 greater than 255. For example: [ab\x{100}-\x{400}].
2015
2016 (vi) pcregrep now has a --utf-8 option (synonym -u) which makes it call
2017 PCRE in UTF-8 mode.
2018
2019 52. The info request value PCRE_INFO_FIRSTCHAR has been renamed
2020 PCRE_INFO_FIRSTBYTE because it is a byte value. However, the old name is
2021 retained for backwards compatibility. (Note that LASTLITERAL is also a byte
2022 value.)
2023
2024 53. The single man page has become too large. I have therefore split it up into
2025 a number of separate man pages. These also give rise to individual HTML pages;
2026 these are now put in a separate directory, and there is an index.html page that
2027 lists them all. Some hyperlinking between the pages has been installed.
2028
2029 54. Added convenience functions for handling named capturing parentheses.
2030
2031 55. Unknown escapes inside character classes (e.g. [\M]) and escapes that
2032 aren't interpreted therein (e.g. [\C]) are literals in Perl. This is now also
2033 true in PCRE, except when the PCRE_EXTENDED option is set, in which case they
2034 are faulted.
2035
2036 56. Introduced HOST_CC and HOST_CFLAGS which can be set in the environment when
2037 calling configure. These values are used when compiling the dftables.c program
2038 which is run to generate the source of the default character tables. They
2039 default to the values of CC and CFLAGS. If you are cross-compiling PCRE,
2040 you will need to set these values.
2041
2042 57. Updated the building process for Windows DLL, as provided by Fred Cox.
2043
2044
2045 Version 3.9 02-Jan-02
2046 ---------------------
2047
2048 1. A bit of extraneous text had somehow crept into the pcregrep documentation.
2049
2050 2. If --disable-static was given, the building process failed when trying to
2051 build pcretest and pcregrep. (For some reason it was using libtool to compile
2052 them, which is not right, as they aren't part of the library.)
2053
2054
2055 Version 3.8 18-Dec-01
2056 ---------------------
2057
2058 1. The experimental UTF-8 code was completely screwed up. It was packing the
2059 bytes in the wrong order. How dumb can you get?
2060
2061
2062 Version 3.7 29-Oct-01
2063 ---------------------
2064
2065 1. In updating pcretest to check change 1 of version 3.6, I screwed up.
2066 This caused pcretest, when used on the test data, to segfault. Unfortunately,
2067 this didn't happen under Solaris 8, where I normally test things.
2068
2069 2. The Makefile had to be changed to make it work on BSD systems, where 'make'
2070 doesn't seem to recognize that ./xxx and xxx are the same file. (This entry
2071 isn't in ChangeLog distributed with 3.7 because I forgot when I hastily made
2072 this fix an hour or so after the initial 3.7 release.)
2073
2074
2075 Version 3.6 23-Oct-01
2076 ---------------------
2077
2078 1. Crashed with /(sens|respons)e and \1ibility/ and "sense and sensibility" if
2079 offsets passed as NULL with zero offset count.
2080
2081 2. The config.guess and config.sub files had not been updated when I moved to
2082 the latest autoconf.
2083
2084
2085 Version 3.5 15-Aug-01
2086 ---------------------
2087
2088 1. Added some missing #if !defined NOPOSIX conditionals in pcretest.c that
2089 had been forgotten.
2090
2091 2. By using declared but undefined structures, we can avoid using "void"
2092 definitions in pcre.h while keeping the internal definitions of the structures
2093 private.
2094
2095 3. The distribution is now built using autoconf 2.50 and libtool 1.4. From a
2096 user point of view, this means that both static and shared libraries are built
2097 by default, but this can be individually controlled. More of the work of
2098 handling this static/shared cases is now inside libtool instead of PCRE's make
2099 file.
2100
2101 4. The pcretest utility is now installed along with pcregrep because it is
2102 useful for users (to test regexs) and by doing this, it automatically gets
2103 relinked by libtool. The documentation has been turned into a man page, so
2104 there are now .1, .txt, and .html versions in /doc.
2105
2106 5. Upgrades to pcregrep:
2107 (i) Added long-form option names like gnu grep.
2108 (ii) Added --help to list all options with an explanatory phrase.
2109 (iii) Added -r, --recursive to recurse into sub-directories.
2110 (iv) Added -f, --file to read patterns from a file.
2111
2112 6. pcre_exec() was referring to its "code" argument before testing that
2113 argument for NULL (and giving an error if it was NULL).
2114
2115 7. Upgraded Makefile.in to allow for compiling in a different directory from
2116 the source directory.
2117
2118 8. Tiny buglet in pcretest: when pcre_fullinfo() was called to retrieve the
2119 options bits, the pointer it was passed was to an int instead of to an unsigned
2120 long int. This mattered only on 64-bit systems.
2121
2122 9. Fixed typo (3.4/1) in pcre.h again. Sigh. I had changed pcre.h (which is
2123 generated) instead of pcre.in, which it its source. Also made the same change
2124 in several of the .c files.
2125
2126 10. A new release of gcc defines printf() as a macro, which broke pcretest
2127 because it had an ifdef in the middle of a string argument for printf(). Fixed
2128 by using separate calls to printf().
2129
2130 11. Added --enable-newline-is-cr and --enable-newline-is-lf to the configure
2131 script, to force use of CR or LF instead of \n in the source. On non-Unix
2132 systems, the value can be set in config.h.
2133
2134 12. The limit of 200 on non-capturing parentheses is a _nesting_ limit, not an
2135 absolute limit. Changed the text of the error message to make this clear, and
2136 likewise updated the man page.
2137
2138 13. The limit of 99 on the number of capturing subpatterns has been removed.
2139 The new limit is 65535, which I hope will not be a "real" limit.
2140
2141
2142 Version 3.4 22-Aug-00
2143 ---------------------
2144
2145 1. Fixed typo in pcre.h: unsigned const char * changed to const unsigned char *.
2146
2147 2. Diagnose condition (?(0) as an error instead of crashing on matching.
2148
2149
2150 Version 3.3 01-Aug-00
2151 ---------------------
2152
2153 1. If an octal character was given, but the value was greater than \377, it
2154 was not getting masked to the least significant bits, as documented. This could
2155 lead to crashes in some systems.
2156
2157 2. Perl 5.6 (if not earlier versions) accepts classes like [a-\d] and treats
2158 the hyphen as a literal. PCRE used to give an error; it now behaves like Perl.
2159
2160 3. Added the functions pcre_free_substring() and pcre_free_substring_list().
2161 These just pass their arguments on to (pcre_free)(), but they are provided
2162 because some uses of PCRE bind it to non-C systems that can call its functions,
2163 but cannot call free() or pcre_free() directly.
2164
2165 4. Add "make test" as a synonym for "make check". Corrected some comments in
2166 the Makefile.
2167
2168 5. Add $(DESTDIR)/ in front of all the paths in the "install" target in the
2169 Makefile.
2170
2171 6. Changed the name of pgrep to pcregrep, because Solaris has introduced a
2172 command called pgrep for grepping around the active processes.
2173
2174 7. Added the beginnings of support for UTF-8 character strings.
2175
2176 8. Arranged for the Makefile to pass over the settings of CC, CFLAGS, and
2177 RANLIB to ./ltconfig so that they are used by libtool. I think these are all
2178 the relevant ones. (AR is not passed because ./ltconfig does its own figuring
2179 out for the ar command.)
2180
2181
2182 Version 3.2 12-May-00
2183 ---------------------
2184
2185 This is purely a bug fixing release.
2186
2187 1. If the pattern /((Z)+|A)*/ was matched agained ZABCDEFG it matched Z instead
2188 of ZA. This was just one example of several cases that could provoke this bug,
2189 which was introduced by change 9 of version 2.00. The code for breaking
2190 infinite loops after an iteration that matches an empty string was't working
2191 correctly.
2192
2193 2. The pcretest program was not imitating Perl correctly for the pattern /a*/g
2194 when matched against abbab (for example). After matching an empty string, it
2195 wasn't forcing anchoring when setting PCRE_NOTEMPTY for the next attempt; this
2196 caused it to match further down the string than it should.
2197
2198 3. The code contained an inclusion of sys/types.h. It isn't clear why this
2199 was there because it doesn't seem to be needed, and it causes trouble on some
2200 systems, as it is not a Standard C header. It has been removed.
2201
2202 4. Made 4 silly changes to the source to avoid stupid compiler warnings that
2203 were reported on the Macintosh. The changes were from
2204
2205 while ((c = *(++ptr)) != 0 && c != '\n');
2206 to
2207 while ((c = *(++ptr)) != 0 && c != '\n') ;
2208
2209 Totally extraordinary, but if that's what it takes...
2210
2211 5. PCRE is being used in one environment where neither memmove() nor bcopy() is
2212 available. Added HAVE_BCOPY and an autoconf test for it; if neither
2213 HAVE_MEMMOVE nor HAVE_BCOPY is set, use a built-in emulation function which
2214 assumes the way PCRE uses memmove() (always moving upwards).
2215
2216 6. PCRE is being used in one environment where strchr() is not available. There
2217 was only one use in pcre.c, and writing it out to avoid strchr() probably gives
2218 faster code anyway.
2219
2220
2221 Version 3.1 09-Feb-00
2222 ---------------------
2223
2224 The only change in this release is the fixing of some bugs in Makefile.in for
2225 the "install" target:
2226
2227 (1) It was failing to install pcreposix.h.
2228
2229 (2) It was overwriting the pcre.3 man page with the pcreposix.3 man page.
2230
2231
2232 Version 3.0 01-Feb-00
2233 ---------------------
2234
2235 1. Add support for the /+ modifier to perltest (to output $` like it does in
2236 pcretest).
2237
2238 2. Add support for the /g modifier to perltest.
2239
2240 3. Fix pcretest so that it behaves even more like Perl for /g when the pattern
2241 matches null strings.
2242
2243 4. Fix perltest so that it doesn't do unwanted things when fed an empty
2244 pattern. Perl treats empty patterns specially - it reuses the most recent
2245 pattern, which is not what we want. Replace // by /(?#)/ in order to avoid this
2246 effect.
2247
2248 5. The POSIX interface was broken in that it was just handing over the POSIX
2249 captured string vector to pcre_exec(), but (since release 2.00) PCRE has
2250 required a bigger vector, with some working space on the end. This means that
2251 the POSIX wrapper now has to get and free some memory, and copy the results.
2252
2253 6. Added some simple autoconf support, placing the test data and the
2254 documentation in separate directories, re-organizing some of the
2255 information files, and making it build pcre-config (a GNU standard). Also added
2256 libtool support for building PCRE as a shared library, which is now the
2257 default.
2258
2259 7. Got rid of the leading zero in the definition of PCRE_MINOR because 08 and
2260 09 are not valid octal constants. Single digits will be used for minor values
2261 less than 10.
2262
2263 8. Defined REG_EXTENDED and REG_NOSUB as zero in the POSIX header, so that
2264 existing programs that set these in the POSIX interface can use PCRE without
2265 modification.
2266
2267 9. Added a new function, pcre_fullinfo() with an extensible interface. It can
2268 return all that pcre_info() returns, plus additional data. The pcre_info()
2269 function is retained for compatibility, but is considered to be obsolete.
2270
2271 10. Added experimental recursion feature (?R) to handle one common case that
2272 Perl 5.6 will be able to do with (?p{...}).
2273
2274 11. Added support for POSIX character classes like [:alpha:], which Perl is
2275 adopting.
2276
2277
2278 Version 2.08 31-Aug-99
2279 ----------------------
2280
2281 1. When startoffset was not zero and the pattern began with ".*", PCRE was not
2282 trying to match at the startoffset position, but instead was moving forward to
2283 the next newline as if a previous match had failed.
2284
2285 2. pcretest was not making use of PCRE_NOTEMPTY when repeating for /g and /G,
2286 and could get into a loop if a null string was matched other than at the start
2287 of the subject.
2288
2289 3. Added definitions of PCRE_MAJOR and PCRE_MINOR to pcre.h so the version can
2290 be distinguished at compile time, and for completeness also added PCRE_DATE.
2291
2292 5. Added Paul Sokolovsky's minor changes to make it easy to compile a Win32 DLL
2293 in GnuWin32 environments.
2294
2295
2296 Version 2.07 29-Jul-99
2297 ----------------------
2298
2299 1. The documentation is now supplied in plain text form and HTML as well as in
2300 the form of man page sources.
2301
2302 2. C++ compilers don't like assigning (void *) values to other pointer types.
2303 In particular this affects malloc(). Although there is no problem in Standard
2304 C, I've put in casts to keep C++ compilers happy.
2305
2306 3. Typo on pcretest.c; a cast of (unsigned char *) in the POSIX regexec() call
2307 should be (const char *).
2308
2309 4. If NOPOSIX is defined, pcretest.c compiles without POSIX support. This may
2310 be useful for non-Unix systems who don't want to bother with the POSIX stuff.
2311 However, I haven't made this a standard facility. The documentation doesn't
2312 mention it, and the Makefile doesn't support it.
2313
2314 5. The Makefile now contains an "install" target, with editable destinations at
2315 the top of the file. The pcretest program is not installed.
2316
2317 6. pgrep -V now gives the PCRE version number and date.
2318
2319 7. Fixed bug: a zero repetition after a literal string (e.g. /abcde{0}/) was
2320 causing the entire string to be ignored, instead of just the last character.
2321
2322 8. If a pattern like /"([^\\"]+|\\.)*"/ is applied in the normal way to a
2323 non-matching string, it can take a very, very long time, even for strings of
2324 quite modest length, because of the nested recursion. PCRE now does better in
2325 some of these cases. It does this by remembering the last required literal
2326 character in the pattern, and pre-searching the subject to ensure it is present
2327 before running the real match. In other words, it applies a heuristic to detect
2328 some types of certain failure quickly, and in the above example, if presented
2329 with a string that has no trailing " it gives "no match" very quickly.
2330
2331 9. A new runtime option PCRE_NOTEMPTY causes null string matches to be ignored;
2332 other alternatives are tried instead.
2333
2334
2335 Version 2.06 09-Jun-99
2336 ----------------------
2337
2338 1. Change pcretest's output for amount of store used to show just the code
2339 space, because the remainder (the data block) varies in size between 32-bit and
2340 64-bit systems.
2341
2342 2. Added an extra argument to pcre_exec() to supply an offset in the subject to
2343 start matching at. This allows lookbehinds to work when searching for multiple
2344 occurrences in a string.
2345
2346 3. Added additional options to pcretest for testing multiple occurrences:
2347
2348 /+ outputs the rest of the string that follows a match
2349 /g loops for multiple occurrences, using the new startoffset argument
2350 /G loops for multiple occurrences by passing an incremented pointer
2351
2352 4. PCRE wasn't doing the "first character" optimization for patterns starting
2353 with \b or \B, though it was doing it for other lookbehind assertions. That is,
2354 it wasn't noticing that a match for a pattern such as /\bxyz/ has to start with
2355 the letter 'x'. On long subject strings, this gives a significant speed-up.
2356
2357
2358 Version 2.05 21-Apr-99
2359 ----------------------
2360
2361 1. Changed the type of magic_number from int to long int so that it works
2362 properly on 16-bit systems.
2363
2364 2. Fixed a bug which caused patterns starting with .* not to work correctly
2365 when the subject string contained newline characters. PCRE was assuming
2366 anchoring for such patterns in all cases, which is not correct because .* will
2367 not pass a newline unless PCRE_DOTALL is set. It now assumes anchoring only if
2368 DOTALL is set at top level; otherwise it knows that patterns starting with .*
2369 must be retried after every newline in the subject.
2370
2371
2372 Version 2.04 18-Feb-99
2373 ----------------------
2374
2375 1. For parenthesized subpatterns with repeats whose minimum was zero, the
2376 computation of the store needed to hold the pattern was incorrect (too large).
2377 If such patterns were nested a few deep, this could multiply and become a real
2378 problem.
2379
2380 2. Added /M option to pcretest to show the memory requirement of a specific
2381 pattern. Made -m a synonym of -s (which does this globally) for compatibility.
2382
2383 3. Subpatterns of the form (regex){n,m} (i.e. limited maximum) were being
2384 compiled in such a way that the backtracking after subsequent failure was
2385 pessimal. Something like (a){0,3} was compiled as (a)?(a)?(a)? instead of
2386 ((a)((a)(a)?)?)? with disastrous performance if the maximum was of any size.
2387
2388
2389 Version 2.03 02-Feb-99
2390 ----------------------
2391
2392 1. Fixed typo and small mistake in man page.
2393
2394 2. Added 4th condition (GPL supersedes if conflict) and created separate
2395 LICENCE file containing the conditions.
2396
2397 3. Updated pcretest so that patterns such as /abc\/def/ work like they do in
2398 Perl, that is the internal \ allows the delimiter to be included in the
2399 pattern. Locked out the use of \ as a delimiter. If \ immediately follows
2400 the final delimiter, add \ to the end of the pattern (to test the error).
2401
2402 4. Added the convenience functions for extracting substrings after a successful
2403 match. Updated pcretest to make it able to test these functions.
2404
2405
2406 Version 2.02 14-Jan-99
2407 ----------------------
2408
2409 1. Initialized the working variables associated with each extraction so that
2410 their saving and restoring doesn't refer to uninitialized store.
2411
2412 2. Put dummy code into study.c in order to trick the optimizer of the IBM C
2413 compiler for OS/2 into generating correct code. Apparently IBM isn't going to
2414 fix the problem.
2415
2416 3. Pcretest: the timing code wasn't using LOOPREPEAT for timing execution
2417 calls, and wasn't printing the correct value for compiling calls. Increased the
2418 default value of LOOPREPEAT, and the number of significant figures in the
2419 times.
2420
2421 4. Changed "/bin/rm" in the Makefile to "-rm" so it works on Windows NT.
2422
2423 5. Renamed "deftables" as "dftables" to get it down to 8 characters, to avoid
2424 a building problem on Windows NT with a FAT file system.
2425
2426
2427 Version 2.01 21-Oct-98
2428 ----------------------
2429
2430 1. Changed the API for pcre_compile() to allow for the provision of a pointer
2431 to character tables built by pcre_maketables() in the current locale. If NULL
2432 is passed, the default tables are used.
2433
2434
2435 Version 2.00 24-Sep-98
2436 ----------------------
2437
2438 1. Since the (>?) facility is in Perl 5.005, don't require PCRE_EXTRA to enable
2439 it any more.
2440
2441 2. Allow quantification of (?>) groups, and make it work correctly.
2442
2443 3. The first character computation wasn't working for (?>) groups.
2444
2445 4. Correct the implementation of \Z (it is permitted to match on the \n at the
2446 end of the subject) and add 5.005's \z, which really does match only at the
2447 very end of the subject.
2448
2449 5. Remove the \X "cut" facility; Perl doesn't have it, and (?> is neater.
2450
2451 6. Remove the ability to specify CASELESS, MULTILINE, DOTALL, and
2452 DOLLAR_END_ONLY at runtime, to make it possible to implement the Perl 5.005
2453 localized options. All options to pcre_study() were also removed.
2454
2455 7. Add other new features from 5.005:
2456
2457 $(?<= positive lookbehind
2458 $(?<! negative lookbehind
2459 (?imsx-imsx) added the unsetting capability
2460 such a setting is global if at outer level; local otherwise
2461 (?imsx-imsx:) non-capturing groups with option setting
2462 (?(cond)re|re) conditional pattern matching
2463
2464 A backreference to itself in a repeated group matches the previous
2465 captured string.
2466
2467 8. General tidying up of studying (both automatic and via "study")
2468 consequential on the addition of new assertions.
2469
2470 9. As in 5.005, unlimited repeated groups that could match an empty substring
2471 are no longer faulted at compile time. Instead, the loop is forcibly broken at
2472 runtime if any iteration does actually match an empty substring.
2473
2474 10. Include the RunTest script in the distribution.
2475
2476 11. Added tests from the Perl 5.005_02 distribution. This showed up a few
2477 discrepancies, some of which were old and were also with respect to 5.004. They
2478 have now been fixed.
2479
2480
2481 Version 1.09 28-Apr-98
2482 ----------------------
2483
2484 1. A negated single character class followed by a quantifier with a minimum
2485 value of one (e.g. [^x]{1,6} ) was not compiled correctly. This could lead to
2486 program crashes, or just wrong answers. This did not apply to negated classes
2487 containing more than one character, or to minima other than one.
2488
2489
2490 Version 1.08 27-Mar-98
2491 ----------------------
2492
2493 1. Add PCRE_UNGREEDY to invert the greediness of quantifiers.
2494
2495 2. Add (?U) and (?X) to set PCRE_UNGREEDY and PCRE_EXTRA respectively. The
2496 latter must appear before anything that relies on it in the pattern.
2497
2498
2499 Version 1.07 16-Feb-98
2500 ----------------------
2501
2502 1. A pattern such as /((a)*)*/ was not being diagnosed as in error (unlimited
2503 repeat of a potentially empty string).
2504
2505
2506 Version 1.06 23-Jan-98
2507 ----------------------
2508
2509 1. Added Markus Oberhumer's little patches for C++.
2510
2511 2. Literal strings longer than 255 characters were broken.
2512
2513
2514 Version 1.05 23-Dec-97
2515 ----------------------
2516
2517 1. Negated character classes containing more than one character were failing if
2518 PCRE_CASELESS was set at run time.
2519
2520
2521 Version 1.04 19-Dec-97
2522 ----------------------
2523
2524 1. Corrected the man page, where some "const" qualifiers had been omitted.
2525
2526 2. Made debugging output print "{0,xxx}" instead of just "{,xxx}" to agree with
2527 input syntax.
2528
2529 3. Fixed memory leak which occurred when a regex with back references was
2530 matched with an offsets vector that wasn't big enough. The temporary memory
2531 that is used in this case wasn't being freed if the match failed.
2532
2533 4. Tidied pcretest to ensure it frees memory that it gets.
2534
2535 5. Temporary memory was being obtained in the case where the passed offsets
2536 vector was exactly big enough.
2537
2538 6. Corrected definition of offsetof() from change 5 below.
2539
2540 7. I had screwed up change 6 below and broken the rules for the use of
2541 setjmp(). Now fixed.
2542
2543
2544 Version 1.03 18-Dec-97
2545 ----------------------
2546
2547 1. A erroneous regex with a missing opening parenthesis was correctly
2548 diagnosed, but PCRE attempted to access brastack[-1], which could cause crashes
2549 on some systems.
2550
2551 2. Replaced offsetof(real_pcre, code) by offsetof(real_pcre, code[0]) because
2552 it was reported that one broken compiler failed on the former because "code" is
2553 also an independent variable.
2554
2555 3. The erroneous regex a[]b caused an array overrun reference.
2556
2557 4. A regex ending with a one-character negative class (e.g. /[^k]$/) did not
2558 fail on data ending with that character. (It was going on too far, and checking
2559 the next character, typically a binary zero.) This was specific to the
2560 optimized code for single-character negative classes.
2561
2562 5. Added a contributed patch from the TIN world which does the following:
2563
2564 + Add an undef for memmove, in case the the system defines a macro for it.
2565
2566 + Add a definition of offsetof(), in case there isn't one. (I don't know
2567 the reason behind this - offsetof() is part of the ANSI standard - but
2568 it does no harm).
2569
2570 + Reduce the ifdef's in pcre.c using macro DPRINTF, thereby eliminating
2571 most of the places where whitespace preceded '#'. I have given up and
2572 allowed the remaining 2 cases to be at the margin.
2573
2574 + Rename some variables in pcre to eliminate shadowing. This seems very
2575 pedantic, but does no harm, of course.
2576
2577 6. Moved the call to setjmp() into its own function, to get rid of warnings
2578 from gcc -Wall, and avoided calling it at all unless PCRE_EXTRA is used.
2579
2580 7. Constructs such as \d{8,} were compiling into the equivalent of
2581 \d{8}\d{0,65527} instead of \d{8}\d* which didn't make much difference to the
2582 outcome, but in this particular case used more store than had been allocated,
2583 which caused the bug to be discovered because it threw up an internal error.
2584
2585 8. The debugging code in both pcre and pcretest for outputting the compiled
2586 form of a regex was going wrong in the case of back references followed by
2587 curly-bracketed repeats.
2588
2589
2590 Version 1.02 12-Dec-97
2591 ----------------------
2592
2593 1. Typos in pcre.3 and comments in the source fixed.
2594
2595 2. Applied a contributed patch to get rid of places where it used to remove
2596 'const' from variables, and fixed some signed/unsigned and uninitialized
2597 variable warnings.
2598
2599 3. Added the "runtest" target to Makefile.
2600
2601 4. Set default compiler flag to -O2 rather than just -O.
2602
2603
2604 Version 1.01 19-Nov-97
2605 ----------------------
2606
2607 1. PCRE was failing to diagnose unlimited repeat of empty string for patterns
2608 like /([ab]*)*/, that is, for classes with more than one character in them.
2609
2610 2. Likewise, it wasn't diagnosing patterns with "once-only" subpatterns, such
2611 as /((?>a*))*/ (a PCRE_EXTRA facility).
2612
2613
2614 Version 1.00 18-Nov-97
2615 ----------------------
2616
2617 1. Added compile-time macros to support systems such as SunOS4 which don't have
2618 memmove() or strerror() but have other things that can be used instead.
2619
2620 2. Arranged that "make clean" removes the executables.
2621
2622
2623 Version 0.99 27-Oct-97
2624 ----------------------
2625
2626 1. Fixed bug in code for optimizing classes with only one character. It was
2627 initializing a 32-byte map regardless, which could cause it to run off the end
2628 of the memory it had got.
2629
2630 2. Added, conditional on PCRE_EXTRA, the proposed (?>REGEX) construction.
2631
2632
2633 Version 0.98 22-Oct-97
2634 ----------------------
2635
2636 1. Fixed bug in code for handling temporary memory usage when there are more
2637 back references than supplied space in the ovector. This could cause segfaults.
2638
2639
2640 Version 0.97 21-Oct-97
2641 ----------------------
2642
2643 1. Added the \X "cut" facility, conditional on PCRE_EXTRA.
2644
2645 2. Optimized negated single characters not to use a bit map.
2646
2647 3. Brought error texts together as macro definitions; clarified some of them;
2648 fixed one that was wrong - it said "range out of order" when it meant "invalid
2649 escape sequence".
2650
2651 4. Changed some char * arguments to const char *.
2652
2653 5. Added PCRE_NOTBOL and PCRE_NOTEOL (from POSIX).
2654
2655 6. Added the POSIX-style API wrapper in pcreposix.a and testing facilities in
2656 pcretest.
2657
2658
2659 Version 0.96 16-Oct-97
2660 ----------------------
2661
2662 1. Added a simple "pgrep" utility to the distribution.
2663
2664 2. Fixed an incompatibility with Perl: "{" is now treated as a normal character
2665 unless it appears in one of the precise forms "{ddd}", "{ddd,}", or "{ddd,ddd}"
2666 where "ddd" means "one or more decimal digits".
2667
2668 3. Fixed serious bug. If a pattern had a back reference, but the call to
2669 pcre_exec() didn't supply a large enough ovector to record the related
2670 identifying subpattern, the match always failed. PCRE now remembers the number
2671 of the largest back reference, and gets some temporary memory in which to save
2672 the offsets during matching if necessary, in order to ensure that
2673 backreferences always work.
2674
2675 4. Increased the compatibility with Perl in a number of ways:
2676
2677 (a) . no longer matches \n by default; an option PCRE_DOTALL is provided
2678 to request this handling. The option can be set at compile or exec time.
2679
2680 (b) $ matches before a terminating newline by default; an option
2681 PCRE_DOLLAR_ENDONLY is provided to override this (but not in multiline
2682 mode). The option can be set at compile or exec time.
2683
2684 (c) The handling of \ followed by a digit other than 0 is now supposed to be
2685 the same as Perl's. If the decimal number it represents is less than 10
2686 or there aren't that many previous left capturing parentheses, an octal
2687 escape is read. Inside a character class, it's always an octal escape,
2688 even if it is a single digit.
2689
2690 (d) An escaped but undefined alphabetic character is taken as a literal,
2691 unless PCRE_EXTRA is set. Currently this just reserves the remaining
2692 escapes.
2693
2694 (e) {0} is now permitted. (The previous item is removed from the compiled
2695 pattern).
2696
2697 5. Changed all the names of code files so that the basic parts are no longer
2698 than 10 characters, and abolished the teeny "globals.c" file.
2699
2700 6. Changed the handling of character classes; they are now done with a 32-byte
2701 bit map always.
2702
2703 7. Added the -d and /D options to pcretest to make it possible to look at the
2704 internals of compilation without having to recompile pcre.
2705
2706
2707 Version 0.95 23-Sep-97
2708 ----------------------
2709
2710 1. Fixed bug in pre-pass concerning escaped "normal" characters such as \x5c or
2711 \x20 at the start of a run of normal characters. These were being treated as
2712 real characters, instead of the source characters being re-checked.
2713
2714
2715 Version 0.94 18-Sep-97
2716 ----------------------
2717
2718 1. The functions are now thread-safe, with the caveat that the global variables
2719 containing pointers to malloc() and free() or alternative functions are the
2720 same for all threads.
2721
2722 2. Get pcre_study() to generate a bitmap of initial characters for non-
2723 anchored patterns when this is possible, and use it if passed to pcre_exec().
2724
2725
2726 Version 0.93 15-Sep-97
2727 ----------------------
2728
2729 1. /(b)|(:+)/ was computing an incorrect first character.
2730
2731 2. Add pcre_study() to the API and the passing of pcre_extra to pcre_exec(),
2732 but not actually doing anything yet.
2733
2734 3. Treat "-" characters in classes that cannot be part of ranges as literals,
2735 as Perl does (e.g. [-az] or [az-]).
2736
2737 4. Set the anchored flag if a branch starts with .* or .*? because that tests
2738 all possible positions.
2739
2740 5. Split up into different modules to avoid including unneeded functions in a
2741 compiled binary. However, compile and exec are still in one module. The "study"
2742 function is split off.
2743
2744 6. The character tables are now in a separate module whose source is generated
2745 by an auxiliary program - but can then be edited by hand if required. There are
2746 now no calls to isalnum(), isspace(), isdigit(), isxdigit(), tolower() or
2747 toupper() in the code.
2748
2749 7. Turn the malloc/free funtions variables into pcre_malloc and pcre_free and
2750 make them global. Abolish the function for setting them, as the caller can now
2751 set them directly.
2752
2753
2754 Version 0.92 11-Sep-97
2755 ----------------------
2756
2757 1. A repeat with a fixed maximum and a minimum of 1 for an ordinary character
2758 (e.g. /a{1,3}/) was broken (I mis-optimized it).
2759
2760 2. Caseless matching was not working in character classes if the characters in
2761 the pattern were in upper case.
2762
2763 3. Make ranges like [W-c] work in the same way as Perl for caseless matching.
2764
2765 4. Make PCRE_ANCHORED public and accept as a compile option.
2766
2767 5. Add an options word to pcre_exec() and accept PCRE_ANCHORED and
2768 PCRE_CASELESS at run time. Add escapes \A and \I to pcretest to cause it to
2769 pass them.
2770
2771 6. Give an error if bad option bits passed at compile or run time.
2772
2773 7. Add PCRE_MULTILINE at compile and exec time, and (?m) as well. Add \M to
2774 pcretest to cause it to pass that flag.
2775
2776 8. Add pcre_info(), to get the number of identifying subpatterns, the stored
2777 options, and the first character, if set.
2778
2779 9. Recognize C+ or C{n,m} where n >= 1 as providing a fixed starting character.
2780
2781
2782 Version 0.91 10-Sep-97
2783 ----------------------
2784
2785 1. PCRE was failing to diagnose unlimited repeats of subpatterns that could
2786 match the empty string as in /(a*)*/. It was looping and ultimately crashing.
2787
2788 2. PCRE was looping on encountering an indefinitely repeated back reference to
2789 a subpattern that had matched an empty string, e.g. /(a|)\1*/. It now does what
2790 Perl does - treats the match as successful.
2791
2792 ****

Properties

Name Value
svn:eol-style native
svn:keywords "Author Date Id Revision Url"

webmaster@exim.org
ViewVC Help
Powered by ViewVC 1.1.12