/[pcre]/code/trunk/ChangeLog
ViewVC logotype

Diff of /code/trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 743 by ph10, Tue Nov 8 09:59:38 2011 UTC revision 842 by ph10, Sat Dec 31 15:19:04 2011 UTC
# Line 1  Line 1 
1  ChangeLog for PCRE  ChangeLog for PCRE
2  ------------------  ------------------
3    
4  Version 8.21  Version 8.30
5  ------------  ------------
6    
7    1.  Renamed "isnumber" as "is_a_number" because in some Mac environments this
8        name is defined in ctype.h.
9    
10    2.  Fixed a bug in the code for calculating the fixed length of lookbehind
11        assertions.
12    
13    3.  Removed the function pcre_info(), which has been obsolete and deprecated
14        since it was replaced by pcre_fullinfo() in February 2000.
15    
16    4.  For a non-anchored pattern, if (*SKIP) was given with a name that did not
17        match a (*MARK), and the match failed at the start of the subject, a
18        reference to memory before the start of the subject could occur. This bug
19        was introduced by fix 17 of release 8.21.
20    
21    5.  A reference to an unset group with zero minimum repetition was giving
22        totally wrong answers (in non-JavaScript-compatibility mode). For example,
23        /(another)?(\1?)test/ matched against "hello world test". This bug was
24        introduced in release 8.13.
25    
26    6.  Add support for 16-bit character strings (a large amount of work involving
27        many changes and refactorings).
28    
29    7.  RunGrepTest failed on msys because \r\n was replaced by whitespace when the
30        command "pattern=`printf 'xxx\r\njkl'`" was run. The pattern is now taken
31        from a file.
32    
33    
34    Version 8.21 12-Dec-2011
35    ------------------------
36    
37  1.  Updating the JIT compiler.  1.  Updating the JIT compiler.
38    
39  2.  JIT compiler now supports OP_NCREF, OP_RREF and OP_NRREF. New test cases  2.  JIT compiler now supports OP_NCREF, OP_RREF and OP_NRREF. New test cases
# Line 12  Version 8.21 Line 42  Version 8.21
42  3.  Fix cache-flush issue on PowerPC (It is still an experimental JIT port).  3.  Fix cache-flush issue on PowerPC (It is still an experimental JIT port).
43      PCRE_EXTRA_TABLES is not suported by JIT, and should be checked before      PCRE_EXTRA_TABLES is not suported by JIT, and should be checked before
44      calling _pcre_jit_exec. Some extra comments are added.      calling _pcre_jit_exec. Some extra comments are added.
45    
46  4.  Mark settings inside atomic groups that do not contain any capturing  4.  (*MARK) settings inside atomic groups that do not contain any capturing
47      parentheses, for example, (?>a(*:m)), were not being passed out. This bug      parentheses, for example, (?>a(*:m)), were not being passed out. This bug
48      was introduced by change 18 for 8.20.      was introduced by change 18 for 8.20.
49    
50    5.  Supporting of \x, \U and \u in JavaScript compatibility mode based on the
51        ECMA-262 standard.
52    
53    6.  Lookbehinds such as (?<=a{2}b) that contained a fixed repetition were
54        erroneously being rejected as "not fixed length" if PCRE_CASELESS was set.
55        This bug was probably introduced by change 9 of 8.13.
56    
57    7.  While fixing 6 above, I noticed that a number of other items were being
58        incorrectly rejected as "not fixed length". This arose partly because newer
59        opcodes had not been added to the fixed-length checking code. I have (a)
60        corrected the bug and added tests for these items, and (b) arranged for an
61        error to occur if an unknown opcode is encountered while checking for fixed
62        length instead of just assuming "not fixed length". The items that were
63        rejected were: (*ACCEPT), (*COMMIT), (*FAIL), (*MARK), (*PRUNE), (*SKIP),
64        (*THEN), \h, \H, \v, \V, and single character negative classes with fixed
65        repetitions, e.g. [^a]{3}, with and without PCRE_CASELESS.
66    
67    8.  A possessively repeated conditional subpattern such as (?(?=c)c|d)++ was
68        being incorrectly compiled and would have given unpredicatble results.
69    
70    9.  A possessively repeated subpattern with minimum repeat count greater than
71        one behaved incorrectly. For example, (A){2,}+ behaved as if it was
72        (A)(A)++ which meant that, after a subsequent mismatch, backtracking into
73        the first (A) could occur when it should not.
74    
75    10. Add a cast and remove a redundant test from the code.
76    
77    11. JIT should use pcre_malloc/pcre_free for allocation.
78    
79    12. Updated pcre-config so that it no longer shows -L/usr/lib, which seems
80        best practice nowadays, and helps with cross-compiling. (If the exec_prefix
81        is anything other than /usr, -L is still shown).
82    
83    13. In non-UTF-8 mode, \C is now supported in lookbehinds and DFA matching.
84    
85    14. Perl does not support \N without a following name in a [] class; PCRE now
86        also gives an error.
87    
88    15. If a forward reference was repeated with an upper limit of around 2000,
89        it caused the error "internal error: overran compiling workspace". The
90        maximum number of forward references (including repeats) was limited by the
91        internal workspace, and dependent on the LINK_SIZE. The code has been
92        rewritten so that the workspace expands (via pcre_malloc) if necessary, and
93        the default depends on LINK_SIZE. There is a new upper limit (for safety)
94        of around 200,000 forward references. While doing this, I also speeded up
95        the filling in of repeated forward references.
96    
97    16. A repeated forward reference in a pattern such as (a)(?2){2}(.) was
98        incorrectly expecting the subject to contain another "a" after the start.
99    
100    17. When (*SKIP:name) is activated without a corresponding (*MARK:name) earlier
101        in the match, the SKIP should be ignored. This was not happening; instead
102        the SKIP was being treated as NOMATCH. For patterns such as
103        /A(*MARK:A)A+(*SKIP:B)Z|AAC/ this meant that the AAC branch was never
104        tested.
105    
106    18. The behaviour of (*MARK), (*PRUNE), and (*THEN) has been reworked and is
107        now much more compatible with Perl, in particular in cases where the result
108        is a non-match for a non-anchored pattern. For example, if
109        /b(*:m)f|a(*:n)w/ is matched against "abc", the non-match returns the name
110        "m", where previously it did not return a name. A side effect of this
111        change is that for partial matches, the last encountered mark name is
112        returned, as for non matches. A number of tests that were previously not
113        Perl-compatible have been moved into the Perl-compatible test files. The
114        refactoring has had the pleasing side effect of removing one argument from
115        the match() function, thus reducing its stack requirements.
116    
117    19. If the /S+ option was used in pcretest to study a pattern using JIT,
118        subsequent uses of /S (without +) incorrectly behaved like /S+.
119    
120    21. Retrieve executable code size support for the JIT compiler and fixing
121        some warnings.
122    
123    22. A caseless match of a UTF-8 character whose other case uses fewer bytes did
124        not work when the shorter character appeared right at the end of the
125        subject string.
126    
127    23. Added some (int) casts to non-JIT modules to reduce warnings on 64-bit
128        systems.
129    
130    24. Added PCRE_INFO_JITSIZE to pass on the value from (21) above, and also
131        output it when the /M option is used in pcretest.
132    
133    25. The CheckMan script was not being included in the distribution. Also, added
134        an explicit "perl" to run Perl scripts from the PrepareRelease script
135        because this is reportedly needed in Windows.
136    
137    26. If study data was being save in a file and studying had not found a set of
138        "starts with" bytes for the pattern, the data written to the file (though
139        never used) was taken from uninitialized memory and so caused valgrind to
140        complain.
141    
142    27. Updated RunTest.bat as provided by Sheri Pierce.
143    
144    28. Fixed a possible uninitialized memory bug in pcre_jit_compile.c.
145    
146    29. Computation of memory usage for the table of capturing group names was
147        giving an unnecessarily large value.
148    
149    
150  Version 8.20 21-Oct-2011  Version 8.20 21-Oct-2011
151  ------------------------  ------------------------

Legend:
Removed from v.743  
changed lines
  Added in v.842

webmaster@exim.org
ViewVC Help
Powered by ViewVC 1.1.12