/[pcre]/code/trunk/ChangeLog
ViewVC logotype

Diff of /code/trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 227 by ph10, Tue Aug 21 15:00:15 2007 UTC revision 581 by ph10, Fri Dec 10 11:40:00 2010 UTC
# Line 1  Line 1 
1  ChangeLog for PCRE  ChangeLog for PCRE
2  ------------------  ------------------
3    
4  Version 7.3 20-Aug-07  Version 8.11 10-Dec-2010
5    ------------------------
6    
7    1.  (*THEN) was not working properly if there were untried alternatives prior
8        to it in the current branch. For example, in ((a|b)(*THEN)(*F)|c..) it
9        backtracked to try for "b" instead of moving to the next alternative branch
10        at the same level (in this case, to look for "c"). The Perl documentation
11        is clear that when (*THEN) is backtracked onto, it goes to the "next
12        alternative in the innermost enclosing group".
13    
14    2.  (*COMMIT) was not overriding (*THEN), as it does in Perl. In a pattern
15        such as   (A(*COMMIT)B(*THEN)C|D)  any failure after matching A should
16        result in overall failure. Similarly, (*COMMIT) now overrides (*PRUNE) and
17        (*SKIP), (*SKIP) overrides (*PRUNE) and (*THEN), and (*PRUNE) overrides
18        (*THEN).
19    
20    3.  If \s appeared in a character class, it removed the VT character from
21        the class, even if it had been included by some previous item, for example
22        in [\x00-\xff\s]. (This was a bug related to the fact that VT is not part
23        of \s, but is part of the POSIX "space" class.)
24    
25    4.  A partial match never returns an empty string (because you can always
26        match an empty string at the end of the subject); however the checking for
27        an empty string was starting at the "start of match" point. This has been
28        changed to the "earliest inspected character" point, because the returned
29        data for a partial match starts at this character. This means that, for
30        example, /(?<=abc)def/ gives a partial match for the subject "abc"
31        (previously it gave "no match").
32    
33    5.  Changes have been made to the way PCRE_PARTIAL_HARD affects the matching
34        of $, \z, \Z, \b, and \B. If the match point is at the end of the string,
35        previously a full match would be given. However, setting PCRE_PARTIAL_HARD
36        has an implication that the given string is incomplete (because a partial
37        match is preferred over a full match). For this reason, these items now
38        give a partial match in this situation. [Aside: previously, the one case
39        /t\b/ matched against "cat" with PCRE_PARTIAL_HARD set did return a partial
40        match rather than a full match, which was wrong by the old rules, but is
41        now correct.]
42    
43    6.  There was a bug in the handling of #-introduced comments, recognized when
44        PCRE_EXTENDED is set, when PCRE_NEWLINE_ANY and PCRE_UTF8 were also set.
45        If a UTF-8 multi-byte character included the byte 0x85 (e.g. +U0445, whose
46        UTF-8 encoding is 0xd1,0x85), this was misinterpreted as a newline when
47        scanning for the end of the comment. (*Character* 0x85 is an "any" newline,
48        but *byte* 0x85 is not, in UTF-8 mode). This bug was present in several
49        places in pcre_compile().
50    
51    7.  Related to (6) above, when pcre_compile() was skipping #-introduced
52        comments when looking ahead for named forward references to subpatterns,
53        the only newline sequence it recognized was NL. It now handles newlines
54        according to the set newline convention.
55    
56    8.  SunOS4 doesn't have strerror() or strtoul(); pcregrep dealt with the
57        former, but used strtoul(), whereas pcretest avoided strtoul() but did not
58        cater for a lack of strerror(). These oversights have been fixed.
59    
60    9.  Added --match-limit and --recursion-limit to pcregrep.
61    
62    10. Added two casts needed to build with Visual Studio when NO_RECURSE is set.
63    
64    11. When the -o option was used, pcregrep was setting a return code of 1, even
65        when matches were found, and --line-buffered was not being honoured.
66    
67    12. Added an optional parentheses number to the -o and --only-matching options
68        of pcregrep.
69    
70    13. Imitating Perl's /g action for multiple matches is tricky when the pattern
71        can match an empty string. The code to do it in pcretest and pcredemo
72        needed fixing:
73    
74        (a) When the newline convention was "crlf", pcretest got it wrong, skipping
75            only one byte after an empty string match just before CRLF (this case
76            just got forgotten; "any" and "anycrlf" were OK).
77    
78        (b) The pcretest code also had a bug, causing it to loop forever in UTF-8
79            mode when an empty string match preceded an ASCII character followed by
80            a non-ASCII character. (The code for advancing by one character rather
81            than one byte was nonsense.)
82    
83        (c) The pcredemo.c sample program did not have any code at all to handle
84            the cases when CRLF is a valid newline sequence.
85    
86    14. Neither pcre_exec() nor pcre_dfa_exec() was checking that the value given
87        as a starting offset was within the subject string. There is now a new
88        error, PCRE_ERROR_BADOFFSET, which is returned if the starting offset is
89        negative or greater than the length of the string. In order to test this,
90        pcretest is extended to allow the setting of negative starting offsets.
91    
92    15. In both pcre_exec() and pcre_dfa_exec() the code for checking that the
93        starting offset points to the beginning of a UTF-8 character was
94        unnecessarily clumsy. I tidied it up.
95    
96    16. Added PCRE_ERROR_SHORTUTF8 to make it possible to distinguish between a
97        bad UTF-8 sequence and one that is incomplete when using PCRE_PARTIAL_HARD.
98    
99    17. Nobody had reported that the --include_dir option, which was added in
100        release 7.7 should have been called --include-dir (hyphen, not underscore)
101        for compatibility with GNU grep. I have changed it to --include-dir, but
102        left --include_dir as an undocumented synonym, and the same for
103        --exclude-dir, though that is not available in GNU grep, at least as of
104        release 2.5.4.
105    
106    18. At a user's suggestion, the macros GETCHAR and friends (which pick up UTF-8
107        characters from a string of bytes) have been redefined so as not to use
108        loops, in order to improve performance in some environments. At the same
109        time, I abstracted some of the common code into auxiliary macros to save
110        repetition (this should not affect the compiled code).
111    
112    19. If \c was followed by a multibyte UTF-8 character, bad things happened. A
113        compile-time error is now given if \c is not followed by an ASCII
114        character, that is, a byte less than 128. (In EBCDIC mode, the code is
115        different, and any byte value is allowed.)
116    
117    20. Recognize (*NO_START_OPT) at the start of a pattern to set the PCRE_NO_
118        START_OPTIMIZE option, which is now allowed at compile time - but just
119        passed through to pcre_exec() or pcre_dfa_exec(). This makes it available
120        to pcregrep and other applications that have no direct access to PCRE
121        options. The new /Y option in pcretest sets this option when calling
122        pcre_compile().
123    
124    21. Change 18 of release 8.01 broke the use of named subpatterns for recursive
125        back references. Groups containing recursive back references were forced to
126        be atomic by that change, but in the case of named groups, the amount of
127        memory required was incorrectly computed, leading to "Failed: internal
128        error: code overflow". This has been fixed.
129    
130    22. Some patches to pcre_stringpiece.h, pcre_stringpiece_unittest.cc, and
131        pcretest.c, to avoid build problems in some Borland environments.
132    
133    
134    Version 8.10 25-Jun-2010
135    ------------------------
136    
137    1.  Added support for (*MARK:ARG) and for ARG additions to PRUNE, SKIP, and
138        THEN.
139    
140    2.  (*ACCEPT) was not working when inside an atomic group.
141    
142    3.  Inside a character class, \B is treated as a literal by default, but
143        faulted if PCRE_EXTRA is set. This mimics Perl's behaviour (the -w option
144        causes the error). The code is unchanged, but I tidied the documentation.
145    
146    4.  Inside a character class, PCRE always treated \R and \X as literals,
147        whereas Perl faults them if its -w option is set. I have changed PCRE so
148        that it faults them when PCRE_EXTRA is set.
149    
150    5.  Added support for \N, which always matches any character other than
151        newline. (It is the same as "." when PCRE_DOTALL is not set.)
152    
153    6.  When compiling pcregrep with newer versions of gcc which may have
154        FORTIFY_SOURCE set, several warnings "ignoring return value of 'fwrite',
155        declared with attribute warn_unused_result" were given. Just casting the
156        result to (void) does not stop the warnings; a more elaborate fudge is
157        needed. I've used a macro to implement this.
158    
159    7.  Minor change to pcretest.c to avoid a compiler warning.
160    
161    8.  Added four artifical Unicode properties to help with an option to make
162        \s etc use properties (see next item). The new properties are: Xan
163        (alphanumeric), Xsp (Perl space), Xps (POSIX space), and Xwd (word).
164    
165    9.  Added PCRE_UCP to make \b, \d, \s, \w, and certain POSIX character classes
166        use Unicode properties. (*UCP) at the start of a pattern can be used to set
167        this option. Modified pcretest to add /W to test this facility. Added
168        REG_UCP to make it available via the POSIX interface.
169    
170    10. Added --line-buffered to pcregrep.
171    
172    11. In UTF-8 mode, if a pattern that was compiled with PCRE_CASELESS was
173        studied, and the match started with a letter with a code point greater than
174        127 whose first byte was different to the first byte of the other case of
175        the letter, the other case of this starting letter was not recognized
176        (#976).
177    
178    12. If a pattern that was studied started with a repeated Unicode property
179        test, for example, \p{Nd}+, there was the theoretical possibility of
180        setting up an incorrect bitmap of starting bytes, but fortunately it could
181        not have actually happened in practice until change 8 above was made (it
182        added property types that matched character-matching opcodes).
183    
184    13. pcre_study() now recognizes \h, \v, and \R when constructing a bit map of
185        possible starting bytes for non-anchored patterns.
186    
187    14. Extended the "auto-possessify" feature of pcre_compile(). It now recognizes
188        \R, and also a number of cases that involve Unicode properties, both
189        explicit and implicit when PCRE_UCP is set.
190    
191    15. If a repeated Unicode property match (e.g. \p{Lu}*) was used with non-UTF-8
192        input, it could crash or give wrong results if characters with values
193        greater than 0xc0 were present in the subject string. (Detail: it assumed
194        UTF-8 input when processing these items.)
195    
196    16. Added a lot of (int) casts to avoid compiler warnings in systems where
197        size_t is 64-bit (#991).
198    
199    17. Added a check for running out of memory when PCRE is compiled with
200        --disable-stack-for-recursion (#990).
201    
202    18. If the last data line in a file for pcretest does not have a newline on
203        the end, a newline was missing in the output.
204    
205    19. The default pcre_chartables.c file recognizes only ASCII characters (values
206        less than 128) in its various bitmaps. However, there is a facility for
207        generating tables according to the current locale when PCRE is compiled. It
208        turns out that in some environments, 0x85 and 0xa0, which are Unicode space
209        characters, are recognized by isspace() and therefore were getting set in
210        these tables, and indeed these tables seem to approximate to ISO 8859. This
211        caused a problem in UTF-8 mode when pcre_study() was used to create a list
212        of bytes that can start a match. For \s, it was including 0x85 and 0xa0,
213        which of course cannot start UTF-8 characters. I have changed the code so
214        that only real ASCII characters (less than 128) and the correct starting
215        bytes for UTF-8 encodings are set for characters greater than 127 when in
216        UTF-8 mode. (When PCRE_UCP is set - see 9 above - the code is different
217        altogether.)
218    
219    20. Added the /T option to pcretest so as to be able to run tests with non-
220        standard character tables, thus making it possible to include the tests
221        used for 19 above in the standard set of tests.
222    
223    21. A pattern such as (?&t)(?#()(?(DEFINE)(?<t>a)) which has a forward
224        reference to a subpattern the other side of a comment that contains an
225        opening parenthesis caused either an internal compiling error, or a
226        reference to the wrong subpattern.
227    
228    
229    Version 8.02 19-Mar-2010
230    ------------------------
231    
232    1.  The Unicode data tables have been updated to Unicode 5.2.0.
233    
234    2.  Added the option --libs-cpp to pcre-config, but only when C++ support is
235        configured.
236    
237    3.  Updated the licensing terms in the pcregexp.pas file, as agreed with the
238        original author of that file, following a query about its status.
239    
240    4.  On systems that do not have stdint.h (e.g. Solaris), check for and include
241        inttypes.h instead. This fixes a bug that was introduced by change 8.01/8.
242    
243    5.  A pattern such as (?&t)*+(?(DEFINE)(?<t>.)) which has a possessive
244        quantifier applied to a forward-referencing subroutine call, could compile
245        incorrect code or give the error "internal error: previously-checked
246        referenced subpattern not found".
247    
248    6.  Both MS Visual Studio and Symbian OS have problems with initializing
249        variables to point to external functions. For these systems, therefore,
250        pcre_malloc etc. are now initialized to local functions that call the
251        relevant global functions.
252    
253    7.  There were two entries missing in the vectors called coptable and poptable
254        in pcre_dfa_exec.c. This could lead to memory accesses outsize the vectors.
255        I've fixed the data, and added a kludgy way of testing at compile time that
256        the lengths are correct (equal to the number of opcodes).
257    
258    8.  Following on from 7, I added a similar kludge to check the length of the
259        eint vector in pcreposix.c.
260    
261    9.  Error texts for pcre_compile() are held as one long string to avoid too
262        much relocation at load time. To find a text, the string is searched,
263        counting zeros. There was no check for running off the end of the string,
264        which could happen if a new error number was added without updating the
265        string.
266    
267    10. \K gave a compile-time error if it appeared in a lookbehind assersion.
268    
269    11. \K was not working if it appeared in an atomic group or in a group that
270        was called as a "subroutine", or in an assertion. Perl 5.11 documents that
271        \K is "not well defined" if used in an assertion. PCRE now accepts it if
272        the assertion is positive, but not if it is negative.
273    
274    12. Change 11 fortuitously reduced the size of the stack frame used in the
275        "match()" function of pcre_exec.c by one pointer. Forthcoming
276        implementation of support for (*MARK) will need an extra pointer on the
277        stack; I have reserved it now, so that the stack frame size does not
278        decrease.
279    
280    13. A pattern such as (?P<L1>(?P<L2>0)|(?P>L2)(?P>L1)) in which the only other
281        item in branch that calls a recursion is a subroutine call - as in the
282        second branch in the above example - was incorrectly given the compile-
283        time error "recursive call could loop indefinitely" because pcre_compile()
284        was not correctly checking the subroutine for matching a non-empty string.
285    
286    14. The checks for overrunning compiling workspace could trigger after an
287        overrun had occurred. This is a "should never occur" error, but it can be
288        triggered by pathological patterns such as hundreds of nested parentheses.
289        The checks now trigger 100 bytes before the end of the workspace.
290    
291    15. Fix typo in configure.ac: "srtoq" should be "strtoq".
292    
293    
294    Version 8.01 19-Jan-2010
295    ------------------------
296    
297    1.  If a pattern contained a conditional subpattern with only one branch (in
298        particular, this includes all (*DEFINE) patterns), a call to pcre_study()
299        computed the wrong minimum data length (which is of course zero for such
300        subpatterns). This could cause incorrect "no match" results.
301    
302    2.  For patterns such as (?i)a(?-i)b|c where an option setting at the start of
303        the pattern is reset in the first branch, pcre_compile() failed with
304        "internal error: code overflow at offset...". This happened only when
305        the reset was to the original external option setting. (An optimization
306        abstracts leading options settings into an external setting, which was the
307        cause of this.)
308    
309    3.  A pattern such as ^(?!a(*SKIP)b) where a negative assertion contained one
310        of the verbs SKIP, PRUNE, or COMMIT, did not work correctly. When the
311        assertion pattern did not match (meaning that the assertion was true), it
312        was incorrectly treated as false if the SKIP had been reached during the
313        matching. This also applied to assertions used as conditions.
314    
315    4.  If an item that is not supported by pcre_dfa_exec() was encountered in an
316        assertion subpattern, including such a pattern used as a condition,
317        unpredictable results occurred, instead of the error return
318        PCRE_ERROR_DFA_UITEM.
319    
320    5.  The C++ GlobalReplace function was not working like Perl for the special
321        situation when an empty string is matched. It now does the fancy magic
322        stuff that is necessary.
323    
324    6.  In pcre_internal.h, obsolete includes to setjmp.h and stdarg.h have been
325        removed. (These were left over from very, very early versions of PCRE.)
326    
327    7.  Some cosmetic changes to the code to make life easier when compiling it
328        as part of something else:
329    
330        (a) Change DEBUG to PCRE_DEBUG.
331    
332        (b) In pcre_compile(), rename the member of the "branch_chain" structure
333            called "current" as "current_branch", to prevent a collision with the
334            Linux macro when compiled as a kernel module.
335    
336        (c) In pcre_study(), rename the function set_bit() as set_table_bit(), to
337            prevent a collision with the Linux macro when compiled as a kernel
338            module.
339    
340    8.  In pcre_compile() there are some checks for integer overflows that used to
341        cast potentially large values to (double). This has been changed to that
342        when building, a check for int64_t is made, and if it is found, it is used
343        instead, thus avoiding the use of floating point arithmetic. (There is no
344        other use of FP in PCRE.) If int64_t is not found, the fallback is to
345        double.
346    
347    9.  Added two casts to avoid signed/unsigned warnings from VS Studio Express
348        2005 (difference between two addresses compared to an unsigned value).
349    
350    10. Change the standard AC_CHECK_LIB test for libbz2 in configure.ac to a
351        custom one, because of the following reported problem in Windows:
352    
353          - libbz2 uses the Pascal calling convention (WINAPI) for the functions
354              under Win32.
355          - The standard autoconf AC_CHECK_LIB fails to include "bzlib.h",
356              therefore missing the function definition.
357          - The compiler thus generates a "C" signature for the test function.
358          - The linker fails to find the "C" function.
359          - PCRE fails to configure if asked to do so against libbz2.
360    
361    11. When running libtoolize from libtool-2.2.6b as part of autogen.sh, these
362        messages were output:
363    
364          Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and
365          rerunning libtoolize, to keep the correct libtool macros in-tree.
366          Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
367    
368        I have done both of these things.
369    
370    12. Although pcre_dfa_exec() does not use nearly as much stack as pcre_exec()
371        most of the time, it *can* run out if it is given a pattern that contains a
372        runaway infinite recursion. I updated the discussion in the pcrestack man
373        page.
374    
375    13. Now that we have gone to the x.xx style of version numbers, the minor
376        version may start with zero. Using 08 or 09 is a bad idea because users
377        might check the value of PCRE_MINOR in their code, and 08 or 09 may be
378        interpreted as invalid octal numbers. I've updated the previous comment in
379        configure.ac, and also added a check that gives an error if 08 or 09 are
380        used.
381    
382    14. Change 8.00/11 was not quite complete: code had been accidentally omitted,
383        causing partial matching to fail when the end of the subject matched \W
384        in a UTF-8 pattern where \W was quantified with a minimum of 3.
385    
386    15. There were some discrepancies between the declarations in pcre_internal.h
387        of _pcre_is_newline(), _pcre_was_newline(), and _pcre_valid_utf8() and
388        their definitions. The declarations used "const uschar *" and the
389        definitions used USPTR. Even though USPTR is normally defined as "const
390        unsigned char *" (and uschar is typedeffed as "unsigned char"), it was
391        reported that: "This difference in casting confuses some C++ compilers, for
392        example, SunCC recognizes above declarations as different functions and
393        generates broken code for hbpcre." I have changed the declarations to use
394        USPTR.
395    
396    16. GNU libtool is named differently on some systems. The autogen.sh script now
397        tries several variants such as glibtoolize (MacOSX) and libtoolize1x
398        (FreeBSD).
399    
400    17. Applied Craig's patch that fixes an HP aCC compile error in pcre 8.00
401        (strtoXX undefined when compiling pcrecpp.cc). The patch contains this
402        comment: "Figure out how to create a longlong from a string: strtoll and
403        equivalent. It's not enough to call AC_CHECK_FUNCS: hpux has a strtoll, for
404        instance, but it only takes 2 args instead of 3!"
405    
406    18. A subtle bug concerned with back references has been fixed by a change of
407        specification, with a corresponding code fix. A pattern such as
408        ^(xa|=?\1a)+$ which contains a back reference inside the group to which it
409        refers, was giving matches when it shouldn't. For example, xa=xaaa would
410        match that pattern. Interestingly, Perl (at least up to 5.11.3) has the
411        same bug. Such groups have to be quantified to be useful, or contained
412        inside another quantified group. (If there's no repetition, the reference
413        can never match.) The problem arises because, having left the group and
414        moved on to the rest of the pattern, a later failure that backtracks into
415        the group uses the captured value from the final iteration of the group
416        rather than the correct earlier one. I have fixed this in PCRE by forcing
417        any group that contains a reference to itself to be an atomic group; that
418        is, there cannot be any backtracking into it once it has completed. This is
419        similar to recursive and subroutine calls.
420    
421    
422    Version 8.00 19-Oct-09
423    ----------------------
424    
425    1.  The table for translating pcre_compile() error codes into POSIX error codes
426        was out-of-date, and there was no check on the pcre_compile() error code
427        being within the table. This could lead to an OK return being given in
428        error.
429    
430    2.  Changed the call to open a subject file in pcregrep from fopen(pathname,
431        "r") to fopen(pathname, "rb"), which fixed a problem with some of the tests
432        in a Windows environment.
433    
434    3.  The pcregrep --count option prints the count for each file even when it is
435        zero, as does GNU grep. However, pcregrep was also printing all files when
436        --files-with-matches was added. Now, when both options are given, it prints
437        counts only for those files that have at least one match. (GNU grep just
438        prints the file name in this circumstance, but including the count seems
439        more useful - otherwise, why use --count?) Also ensured that the
440        combination -clh just lists non-zero counts, with no names.
441    
442    4.  The long form of the pcregrep -F option was incorrectly implemented as
443        --fixed_strings instead of --fixed-strings. This is an incompatible change,
444        but it seems right to fix it, and I didn't think it was worth preserving
445        the old behaviour.
446    
447    5.  The command line items --regex=pattern and --regexp=pattern were not
448        recognized by pcregrep, which required --regex pattern or --regexp pattern
449        (with a space rather than an '='). The man page documented the '=' forms,
450        which are compatible with GNU grep; these now work.
451    
452    6.  No libpcreposix.pc file was created for pkg-config; there was just
453        libpcre.pc and libpcrecpp.pc. The omission has been rectified.
454    
455    7.  Added #ifndef SUPPORT_UCP into the pcre_ucd.c module, to reduce its size
456        when UCP support is not needed, by modifying the Python script that
457        generates it from Unicode data files. This should not matter if the module
458        is correctly used as a library, but I received one complaint about 50K of
459        unwanted data. My guess is that the person linked everything into his
460        program rather than using a library. Anyway, it does no harm.
461    
462    8.  A pattern such as /\x{123}{2,2}+/8 was incorrectly compiled; the trigger
463        was a minimum greater than 1 for a wide character in a possessive
464        repetition. The same bug could also affect patterns like /(\x{ff}{0,2})*/8
465        which had an unlimited repeat of a nested, fixed maximum repeat of a wide
466        character. Chaos in the form of incorrect output or a compiling loop could
467        result.
468    
469    9.  The restrictions on what a pattern can contain when partial matching is
470        requested for pcre_exec() have been removed. All patterns can now be
471        partially matched by this function. In addition, if there are at least two
472        slots in the offset vector, the offset of the earliest inspected character
473        for the match and the offset of the end of the subject are set in them when
474        PCRE_ERROR_PARTIAL is returned.
475    
476    10. Partial matching has been split into two forms: PCRE_PARTIAL_SOFT, which is
477        synonymous with PCRE_PARTIAL, for backwards compatibility, and
478        PCRE_PARTIAL_HARD, which causes a partial match to supersede a full match,
479        and may be more useful for multi-segment matching.
480    
481    11. Partial matching with pcre_exec() is now more intuitive. A partial match
482        used to be given if ever the end of the subject was reached; now it is
483        given only if matching could not proceed because another character was
484        needed. This makes a difference in some odd cases such as Z(*FAIL) with the
485        string "Z", which now yields "no match" instead of "partial match". In the
486        case of pcre_dfa_exec(), "no match" is given if every matching path for the
487        final character ended with (*FAIL).
488    
489    12. Restarting a match using pcre_dfa_exec() after a partial match did not work
490        if the pattern had a "must contain" character that was already found in the
491        earlier partial match, unless partial matching was again requested. For
492        example, with the pattern /dog.(body)?/, the "must contain" character is
493        "g". If the first part-match was for the string "dog", restarting with
494        "sbody" failed. This bug has been fixed.
495    
496    13. The string returned by pcre_dfa_exec() after a partial match has been
497        changed so that it starts at the first inspected character rather than the
498        first character of the match. This makes a difference only if the pattern
499        starts with a lookbehind assertion or \b or \B (\K is not supported by
500        pcre_dfa_exec()). It's an incompatible change, but it makes the two
501        matching functions compatible, and I think it's the right thing to do.
502    
503    14. Added a pcredemo man page, created automatically from the pcredemo.c file,
504        so that the demonstration program is easily available in environments where
505        PCRE has not been installed from source.
506    
507    15. Arranged to add -DPCRE_STATIC to cflags in libpcre.pc, libpcreposix.cp,
508        libpcrecpp.pc and pcre-config when PCRE is not compiled as a shared
509        library.
510    
511    16. Added REG_UNGREEDY to the pcreposix interface, at the request of a user.
512        It maps to PCRE_UNGREEDY. It is not, of course, POSIX-compatible, but it
513        is not the first non-POSIX option to be added. Clearly some people find
514        these options useful.
515    
516    17. If a caller to the POSIX matching function regexec() passes a non-zero
517        value for nmatch with a NULL value for pmatch, the value of
518        nmatch is forced to zero.
519    
520    18. RunGrepTest did not have a test for the availability of the -u option of
521        the diff command, as RunTest does. It now checks in the same way as
522        RunTest, and also checks for the -b option.
523    
524    19. If an odd number of negated classes containing just a single character
525        interposed, within parentheses, between a forward reference to a named
526        subpattern and the definition of the subpattern, compilation crashed with
527        an internal error, complaining that it could not find the referenced
528        subpattern. An example of a crashing pattern is /(?&A)(([^m])(?<A>))/.
529        [The bug was that it was starting one character too far in when skipping
530        over the character class, thus treating the ] as data rather than
531        terminating the class. This meant it could skip too much.]
532    
533    20. Added PCRE_NOTEMPTY_ATSTART in order to be able to correctly implement the
534        /g option in pcretest when the pattern contains \K, which makes it possible
535        to have an empty string match not at the start, even when the pattern is
536        anchored. Updated pcretest and pcredemo to use this option.
537    
538    21. If the maximum number of capturing subpatterns in a recursion was greater
539        than the maximum at the outer level, the higher number was returned, but
540        with unset values at the outer level. The correct (outer level) value is
541        now given.
542    
543    22. If (*ACCEPT) appeared inside capturing parentheses, previous releases of
544        PCRE did not set those parentheses (unlike Perl). I have now found a way to
545        make it do so. The string so far is captured, making this feature
546        compatible with Perl.
547    
548    23. The tests have been re-organized, adding tests 11 and 12, to make it
549        possible to check the Perl 5.10 features against Perl 5.10.
550    
551    24. Perl 5.10 allows subroutine calls in lookbehinds, as long as the subroutine
552        pattern matches a fixed length string. PCRE did not allow this; now it
553        does. Neither allows recursion.
554    
555    25. I finally figured out how to implement a request to provide the minimum
556        length of subject string that was needed in order to match a given pattern.
557        (It was back references and recursion that I had previously got hung up
558        on.) This code has now been added to pcre_study(); it finds a lower bound
559        to the length of subject needed. It is not necessarily the greatest lower
560        bound, but using it to avoid searching strings that are too short does give
561        some useful speed-ups. The value is available to calling programs via
562        pcre_fullinfo().
563    
564    26. While implementing 25, I discovered to my embarrassment that pcretest had
565        not been passing the result of pcre_study() to pcre_dfa_exec(), so the
566        study optimizations had never been tested with that matching function.
567        Oops. What is worse, even when it was passed study data, there was a bug in
568        pcre_dfa_exec() that meant it never actually used it. Double oops. There
569        were also very few tests of studied patterns with pcre_dfa_exec().
570    
571    27. If (?| is used to create subpatterns with duplicate numbers, they are now
572        allowed to have the same name, even if PCRE_DUPNAMES is not set. However,
573        on the other side of the coin, they are no longer allowed to have different
574        names, because these cannot be distinguished in PCRE, and this has caused
575        confusion. (This is a difference from Perl.)
576    
577    28. When duplicate subpattern names are present (necessarily with different
578        numbers, as required by 27 above), and a test is made by name in a
579        conditional pattern, either for a subpattern having been matched, or for
580        recursion in such a pattern, all the associated numbered subpatterns are
581        tested, and the overall condition is true if the condition is true for any
582        one of them. This is the way Perl works, and is also more like the way
583        testing by number works.
584    
585    
586    Version 7.9 11-Apr-09
587    ---------------------
588    
589    1.  When building with support for bzlib/zlib (pcregrep) and/or readline
590        (pcretest), all targets were linked against these libraries. This included
591        libpcre, libpcreposix, and libpcrecpp, even though they do not use these
592        libraries. This caused unwanted dependencies to be created. This problem
593        has been fixed, and now only pcregrep is linked with bzlib/zlib and only
594        pcretest is linked with readline.
595    
596    2.  The "typedef int BOOL" in pcre_internal.h that was included inside the
597        "#ifndef FALSE" condition by an earlier change (probably 7.8/18) has been
598        moved outside it again, because FALSE and TRUE are already defined in AIX,
599        but BOOL is not.
600    
601    3.  The pcre_config() function was treating the PCRE_MATCH_LIMIT and
602        PCRE_MATCH_LIMIT_RECURSION values as ints, when they should be long ints.
603    
604    4.  The pcregrep documentation said spaces were inserted as well as colons (or
605        hyphens) following file names and line numbers when outputting matching
606        lines. This is not true; no spaces are inserted. I have also clarified the
607        wording for the --colour (or --color) option.
608    
609    5.  In pcregrep, when --colour was used with -o, the list of matching strings
610        was not coloured; this is different to GNU grep, so I have changed it to be
611        the same.
612    
613    6.  When --colo(u)r was used in pcregrep, only the first matching substring in
614        each matching line was coloured. Now it goes on to look for further matches
615        of any of the test patterns, which is the same behaviour as GNU grep.
616    
617    7.  A pattern that could match an empty string could cause pcregrep to loop; it
618        doesn't make sense to accept an empty string match in pcregrep, so I have
619        locked it out (using PCRE's PCRE_NOTEMPTY option). By experiment, this
620        seems to be how GNU grep behaves.
621    
622    8.  The pattern (?(?=.*b)b|^) was incorrectly compiled as "match must be at
623        start or after a newline", because the conditional assertion was not being
624        correctly handled. The rule now is that both the assertion and what follows
625        in the first alternative must satisfy the test.
626    
627    9.  If auto-callout was enabled in a pattern with a conditional group whose
628        condition was an assertion, PCRE could crash during matching, both with
629        pcre_exec() and pcre_dfa_exec().
630    
631    10. The PCRE_DOLLAR_ENDONLY option was not working when pcre_dfa_exec() was
632        used for matching.
633    
634    11. Unicode property support in character classes was not working for
635        characters (bytes) greater than 127 when not in UTF-8 mode.
636    
637    12. Added the -M command line option to pcretest.
638    
639    14. Added the non-standard REG_NOTEMPTY option to the POSIX interface.
640    
641    15. Added the PCRE_NO_START_OPTIMIZE match-time option.
642    
643    16. Added comments and documentation about mis-use of no_arg in the C++
644        wrapper.
645    
646    17. Implemented support for UTF-8 encoding in EBCDIC environments, a patch
647        from Martin Jerabek that uses macro names for all relevant character and
648        string constants.
649    
650    18. Added to pcre_internal.h two configuration checks: (a) If both EBCDIC and
651        SUPPORT_UTF8 are set, give an error; (b) If SUPPORT_UCP is set without
652        SUPPORT_UTF8, define SUPPORT_UTF8. The "configure" script handles both of
653        these, but not everybody uses configure.
654    
655    19. A conditional group that had only one branch was not being correctly
656        recognized as an item that could match an empty string. This meant that an
657        enclosing group might also not be so recognized, causing infinite looping
658        (and probably a segfault) for patterns such as ^"((?(?=[a])[^"])|b)*"$
659        with the subject "ab", where knowledge that the repeated group can match
660        nothing is needed in order to break the loop.
661    
662    20. If a pattern that was compiled with callouts was matched using pcre_dfa_
663        exec(), but without supplying a callout function, matching went wrong.
664    
665    21. If PCRE_ERROR_MATCHLIMIT occurred during a recursion, there was a memory
666        leak if the size of the offset vector was greater than 30. When the vector
667        is smaller, the saved offsets during recursion go onto a local stack
668        vector, but for larger vectors malloc() is used. It was failing to free
669        when the recursion yielded PCRE_ERROR_MATCH_LIMIT (or any other "abnormal"
670        error, in fact).
671    
672    22. There was a missing #ifdef SUPPORT_UTF8 round one of the variables in the
673        heapframe that is used only when UTF-8 support is enabled. This caused no
674        problem, but was untidy.
675    
676    23. Steven Van Ingelgem's patch to CMakeLists.txt to change the name
677        CMAKE_BINARY_DIR to PROJECT_BINARY_DIR so that it works when PCRE is
678        included within another project.
679    
680    24. Steven Van Ingelgem's patches to add more options to the CMake support,
681        slightly modified by me:
682    
683          (a) PCRE_BUILD_TESTS can be set OFF not to build the tests, including
684              not building pcregrep.
685    
686          (b) PCRE_BUILD_PCREGREP can be see OFF not to build pcregrep, but only
687              if PCRE_BUILD_TESTS is also set OFF, because the tests use pcregrep.
688    
689    25. Forward references, both numeric and by name, in patterns that made use of
690        duplicate group numbers, could behave incorrectly or give incorrect errors,
691        because when scanning forward to find the reference group, PCRE was not
692        taking into account the duplicate group numbers. A pattern such as
693        ^X(?3)(a)(?|(b)|(q))(Y) is an example.
694    
695    26. Changed a few more instances of "const unsigned char *" to USPTR, making
696        the feature of a custom pointer more persuasive (as requested by a user).
697    
698    27. Wrapped the definitions of fileno and isatty for Windows, which appear in
699        pcretest.c, inside #ifndefs, because it seems they are sometimes already
700        pre-defined.
701    
702    28. Added support for (*UTF8) at the start of a pattern.
703    
704    29. Arrange for flags added by the "release type" setting in CMake to be shown
705        in the configuration summary.
706    
707    
708    Version 7.8 05-Sep-08
709    ---------------------
710    
711    1.  Replaced UCP searching code with optimized version as implemented for Ad
712        Muncher (http://www.admuncher.com/) by Peter Kankowski. This uses a two-
713        stage table and inline lookup instead of a function, giving speed ups of 2
714        to 5 times on some simple patterns that I tested. Permission was given to
715        distribute the MultiStage2.py script that generates the tables (it's not in
716        the tarball, but is in the Subversion repository).
717    
718    2.  Updated the Unicode datatables to Unicode 5.1.0. This adds yet more
719        scripts.
720    
721    3.  Change 12 for 7.7 introduced a bug in pcre_study() when a pattern contained
722        a group with a zero qualifier. The result of the study could be incorrect,
723        or the function might crash, depending on the pattern.
724    
725    4.  Caseless matching was not working for non-ASCII characters in back
726        references. For example, /(\x{de})\1/8i was not matching \x{de}\x{fe}.
727        It now works when Unicode Property Support is available.
728    
729    5.  In pcretest, an escape such as \x{de} in the data was always generating
730        a UTF-8 string, even in non-UTF-8 mode. Now it generates a single byte in
731        non-UTF-8 mode. If the value is greater than 255, it gives a warning about
732        truncation.
733    
734    6.  Minor bugfix in pcrecpp.cc (change "" == ... to NULL == ...).
735    
736    7.  Added two (int) casts to pcregrep when printing the difference of two
737        pointers, in case they are 64-bit values.
738    
739    8.  Added comments about Mac OS X stack usage to the pcrestack man page and to
740        test 2 if it fails.
741    
742    9.  Added PCRE_CALL_CONVENTION just before the names of all exported functions,
743        and a #define of that name to empty if it is not externally set. This is to
744        allow users of MSVC to set it if necessary.
745    
746    10. The PCRE_EXP_DEFN macro which precedes exported functions was missing from
747        the convenience functions in the pcre_get.c source file.
748    
749    11. An option change at the start of a pattern that had top-level alternatives
750        could cause overwriting and/or a crash. This command provoked a crash in
751        some environments:
752    
753          printf "/(?i)[\xc3\xa9\xc3\xbd]|[\xc3\xa9\xc3\xbdA]/8\n" | pcretest
754    
755        This potential security problem was recorded as CVE-2008-2371.
756    
757    12. For a pattern where the match had to start at the beginning or immediately
758        after a newline (e.g /.*anything/ without the DOTALL flag), pcre_exec() and
759        pcre_dfa_exec() could read past the end of the passed subject if there was
760        no match. To help with detecting such bugs (e.g. with valgrind), I modified
761        pcretest so that it places the subject at the end of its malloc-ed buffer.
762    
763    13. The change to pcretest in 12 above threw up a couple more cases when pcre_
764        exec() might read past the end of the data buffer in UTF-8 mode.
765    
766    14. A similar bug to 7.3/2 existed when the PCRE_FIRSTLINE option was set and
767        the data contained the byte 0x85 as part of a UTF-8 character within its
768        first line. This applied both to normal and DFA matching.
769    
770    15. Lazy qualifiers were not working in some cases in UTF-8 mode. For example,
771        /^[^d]*?$/8 failed to match "abc".
772    
773    16. Added a missing copyright notice to pcrecpp_internal.h.
774    
775    17. Make it more clear in the documentation that values returned from
776        pcre_exec() in ovector are byte offsets, not character counts.
777    
778    18. Tidied a few places to stop certain compilers from issuing warnings.
779    
780    19. Updated the Virtual Pascal + BCC files to compile the latest v7.7, as
781        supplied by Stefan Weber. I made a further small update for 7.8 because
782        there is a change of source arrangements: the pcre_searchfuncs.c module is
783        replaced by pcre_ucd.c.
784    
785    
786    Version 7.7 07-May-08
787    ---------------------
788    
789    1.  Applied Craig's patch to sort out a long long problem: "If we can't convert
790        a string to a long long, pretend we don't even have a long long." This is
791        done by checking for the strtoq, strtoll, and _strtoi64 functions.
792    
793    2.  Applied Craig's patch to pcrecpp.cc to restore ABI compatibility with
794        pre-7.6 versions, which defined a global no_arg variable instead of putting
795        it in the RE class. (See also #8 below.)
796    
797    3.  Remove a line of dead code, identified by coverity and reported by Nuno
798        Lopes.
799    
800    4.  Fixed two related pcregrep bugs involving -r with --include or --exclude:
801    
802        (1) The include/exclude patterns were being applied to the whole pathnames
803            of files, instead of just to the final components.
804    
805        (2) If there was more than one level of directory, the subdirectories were
806            skipped unless they satisfied the include/exclude conditions. This is
807            inconsistent with GNU grep (and could even be seen as contrary to the
808            pcregrep specification - which I improved to make it absolutely clear).
809            The action now is always to scan all levels of directory, and just
810            apply the include/exclude patterns to regular files.
811    
812    5.  Added the --include_dir and --exclude_dir patterns to pcregrep, and used
813        --exclude_dir in the tests to avoid scanning .svn directories.
814    
815    6.  Applied Craig's patch to the QuoteMeta function so that it escapes the
816        NUL character as backslash + 0 rather than backslash + NUL, because PCRE
817        doesn't support NULs in patterns.
818    
819    7.  Added some missing "const"s to declarations of static tables in
820        pcre_compile.c and pcre_dfa_exec.c.
821    
822    8.  Applied Craig's patch to pcrecpp.cc to fix a problem in OS X that was
823        caused by fix #2  above. (Subsequently also a second patch to fix the
824        first patch. And a third patch - this was a messy problem.)
825    
826    9.  Applied Craig's patch to remove the use of push_back().
827    
828    10. Applied Alan Lehotsky's patch to add REG_STARTEND support to the POSIX
829        matching function regexec().
830    
831    11. Added support for the Oniguruma syntax \g<name>, \g<n>, \g'name', \g'n',
832        which, however, unlike Perl's \g{...}, are subroutine calls, not back
833        references. PCRE supports relative numbers with this syntax (I don't think
834        Oniguruma does).
835    
836    12. Previously, a group with a zero repeat such as (...){0} was completely
837        omitted from the compiled regex. However, this means that if the group
838        was called as a subroutine from elsewhere in the pattern, things went wrong
839        (an internal error was given). Such groups are now left in the compiled
840        pattern, with a new opcode that causes them to be skipped at execution
841        time.
842    
843    13. Added the PCRE_JAVASCRIPT_COMPAT option. This makes the following changes
844        to the way PCRE behaves:
845    
846        (a) A lone ] character is dis-allowed (Perl treats it as data).
847    
848        (b) A back reference to an unmatched subpattern matches an empty string
849            (Perl fails the current match path).
850    
851        (c) A data ] in a character class must be notated as \] because if the
852            first data character in a class is ], it defines an empty class. (In
853            Perl it is not possible to have an empty class.) The empty class []
854            never matches; it forces failure and is equivalent to (*FAIL) or (?!).
855            The negative empty class [^] matches any one character, independently
856            of the DOTALL setting.
857    
858    14. A pattern such as /(?2)[]a()b](abc)/ which had a forward reference to a
859        non-existent subpattern following a character class starting with ']' and
860        containing () gave an internal compiling error instead of "reference to
861        non-existent subpattern". Fortunately, when the pattern did exist, the
862        compiled code was correct. (When scanning forwards to check for the
863        existencd of the subpattern, it was treating the data ']' as terminating
864        the class, so got the count wrong. When actually compiling, the reference
865        was subsequently set up correctly.)
866    
867    15. The "always fail" assertion (?!) is optimzed to (*FAIL) by pcre_compile;
868        it was being rejected as not supported by pcre_dfa_exec(), even though
869        other assertions are supported. I have made pcre_dfa_exec() support
870        (*FAIL).
871    
872    16. The implementation of 13c above involved the invention of a new opcode,
873        OP_ALLANY, which is like OP_ANY but doesn't check the /s flag. Since /s
874        cannot be changed at match time, I realized I could make a small
875        improvement to matching performance by compiling OP_ALLANY instead of
876        OP_ANY for "." when DOTALL was set, and then removing the runtime tests
877        on the OP_ANY path.
878    
879    17. Compiling pcretest on Windows with readline support failed without the
880        following two fixes: (1) Make the unistd.h include conditional on
881        HAVE_UNISTD_H; (2) #define isatty and fileno as _isatty and _fileno.
882    
883    18. Changed CMakeLists.txt and cmake/FindReadline.cmake to arrange for the
884        ncurses library to be included for pcretest when ReadLine support is
885        requested, but also to allow for it to be overridden. This patch came from
886        Daniel Bergström.
887    
888    19. There was a typo in the file ucpinternal.h where f0_rangeflag was defined
889        as 0x00f00000 instead of 0x00800000. Luckily, this would not have caused
890        any errors with the current Unicode tables. Thanks to Peter Kankowski for
891        spotting this.
892    
893    
894    Version 7.6 28-Jan-08
895    ---------------------
896    
897    1.  A character class containing a very large number of characters with
898        codepoints greater than 255 (in UTF-8 mode, of course) caused a buffer
899        overflow.
900    
901    2.  Patch to cut out the "long long" test in pcrecpp_unittest when
902        HAVE_LONG_LONG is not defined.
903    
904    3.  Applied Christian Ehrlicher's patch to update the CMake build files to
905        bring them up to date and include new features. This patch includes:
906    
907        - Fixed PH's badly added libz and libbz2 support.
908        - Fixed a problem with static linking.
909        - Added pcredemo. [But later removed - see 7 below.]
910        - Fixed dftables problem and added an option.
911        - Added a number of HAVE_XXX tests, including HAVE_WINDOWS_H and
912            HAVE_LONG_LONG.
913        - Added readline support for pcretest.
914        - Added an listing of the option settings after cmake has run.
915    
916    4.  A user submitted a patch to Makefile that makes it easy to create
917        "pcre.dll" under mingw when using Configure/Make. I added stuff to
918        Makefile.am that cause it to include this special target, without
919        affecting anything else. Note that the same mingw target plus all
920        the other distribution libraries and programs are now supported
921        when configuring with CMake (see 6 below) instead of with
922        Configure/Make.
923    
924    5.  Applied Craig's patch that moves no_arg into the RE class in the C++ code.
925        This is an attempt to solve the reported problem "pcrecpp::no_arg is not
926        exported in the Windows port". It has not yet been confirmed that the patch
927        solves the problem, but it does no harm.
928    
929    6.  Applied Sheri's patch to CMakeLists.txt to add NON_STANDARD_LIB_PREFIX and
930        NON_STANDARD_LIB_SUFFIX for dll names built with mingw when configured
931        with CMake, and also correct the comment about stack recursion.
932    
933    7.  Remove the automatic building of pcredemo from the ./configure system and
934        from CMakeLists.txt. The whole idea of pcredemo.c is that it is an example
935        of a program that users should build themselves after PCRE is installed, so
936        building it automatically is not really right. What is more, it gave
937        trouble in some build environments.
938    
939    8.  Further tidies to CMakeLists.txt from Sheri and Christian.
940    
941    
942    Version 7.5 10-Jan-08
943    ---------------------
944    
945    1.  Applied a patch from Craig: "This patch makes it possible to 'ignore'
946        values in parens when parsing an RE using the C++ wrapper."
947    
948    2.  Negative specials like \S did not work in character classes in UTF-8 mode.
949        Characters greater than 255 were excluded from the class instead of being
950        included.
951    
952    3.  The same bug as (2) above applied to negated POSIX classes such as
953        [:^space:].
954    
955    4.  PCRECPP_STATIC was referenced in pcrecpp_internal.h, but nowhere was it
956        defined or documented. It seems to have been a typo for PCRE_STATIC, so
957        I have changed it.
958    
959    5.  The construct (?&) was not diagnosed as a syntax error (it referenced the
960        first named subpattern) and a construct such as (?&a) would reference the
961        first named subpattern whose name started with "a" (in other words, the
962        length check was missing). Both these problems are fixed. "Subpattern name
963        expected" is now given for (?&) (a zero-length name), and this patch also
964        makes it give the same error for \k'' (previously it complained that that
965        was a reference to a non-existent subpattern).
966    
967    6.  The erroneous patterns (?+-a) and (?-+a) give different error messages;
968        this is right because (?- can be followed by option settings as well as by
969        digits. I have, however, made the messages clearer.
970    
971    7.  Patterns such as (?(1)a|b) (a pattern that contains fewer subpatterns
972        than the number used in the conditional) now cause a compile-time error.
973        This is actually not compatible with Perl, which accepts such patterns, but
974        treats the conditional as always being FALSE (as PCRE used to), but it
975        seems to me that giving a diagnostic is better.
976    
977    8.  Change "alphameric" to the more common word "alphanumeric" in comments
978        and messages.
979    
980    9.  Fix two occurrences of "backslash" in comments that should have been
981        "backspace".
982    
983    10. Remove two redundant lines of code that can never be obeyed (their function
984        was moved elsewhere).
985    
986    11. The program that makes PCRE's Unicode character property table had a bug
987        which caused it to generate incorrect table entries for sequences of
988        characters that have the same character type, but are in different scripts.
989        It amalgamated them into a single range, with the script of the first of
990        them. In other words, some characters were in the wrong script. There were
991        thirteen such cases, affecting characters in the following ranges:
992    
993          U+002b0 - U+002c1
994          U+0060c - U+0060d
995          U+0061e - U+00612
996          U+0064b - U+0065e
997          U+0074d - U+0076d
998          U+01800 - U+01805
999          U+01d00 - U+01d77
1000          U+01d9b - U+01dbf
1001          U+0200b - U+0200f
1002          U+030fc - U+030fe
1003          U+03260 - U+0327f
1004          U+0fb46 - U+0fbb1
1005          U+10450 - U+1049d
1006    
1007    12. The -o option (show only the matching part of a line) for pcregrep was not
1008        compatible with GNU grep in that, if there was more than one match in a
1009        line, it showed only the first of them. It now behaves in the same way as
1010        GNU grep.
1011    
1012    13. If the -o and -v options were combined for pcregrep, it printed a blank
1013        line for every non-matching line. GNU grep prints nothing, and pcregrep now
1014        does the same. The return code can be used to tell if there were any
1015        non-matching lines.
1016    
1017    14. Added --file-offsets and --line-offsets to pcregrep.
1018    
1019    15. The pattern (?=something)(?R) was not being diagnosed as a potentially
1020        infinitely looping recursion. The bug was that positive lookaheads were not
1021        being skipped when checking for a possible empty match (negative lookaheads
1022        and both kinds of lookbehind were skipped).
1023    
1024    16. Fixed two typos in the Windows-only code in pcregrep.c, and moved the
1025        inclusion of <windows.h> to before rather than after the definition of
1026        INVALID_FILE_ATTRIBUTES (patch from David Byron).
1027    
1028    17. Specifying a possessive quantifier with a specific limit for a Unicode
1029        character property caused pcre_compile() to compile bad code, which led at
1030        runtime to PCRE_ERROR_INTERNAL (-14). Examples of patterns that caused this
1031        are: /\p{Zl}{2,3}+/8 and /\p{Cc}{2}+/8. It was the possessive "+" that
1032        caused the error; without that there was no problem.
1033    
1034    18. Added --enable-pcregrep-libz and --enable-pcregrep-libbz2.
1035    
1036    19. Added --enable-pcretest-libreadline.
1037    
1038    20. In pcrecpp.cc, the variable 'count' was incremented twice in
1039        RE::GlobalReplace(). As a result, the number of replacements returned was
1040        double what it should be. I removed one of the increments, but Craig sent a
1041        later patch that removed the other one (the right fix) and added unit tests
1042        that check the return values (which was not done before).
1043    
1044    21. Several CMake things:
1045    
1046        (1) Arranged that, when cmake is used on Unix, the libraries end up with
1047            the names libpcre and libpcreposix, not just pcre and pcreposix.
1048    
1049        (2) The above change means that pcretest and pcregrep are now correctly
1050            linked with the newly-built libraries, not previously installed ones.
1051    
1052        (3) Added PCRE_SUPPORT_LIBREADLINE, PCRE_SUPPORT_LIBZ, PCRE_SUPPORT_LIBBZ2.
1053    
1054    22. In UTF-8 mode, with newline set to "any", a pattern such as .*a.*=.b.*
1055        crashed when matching a string such as a\x{2029}b (note that \x{2029} is a
1056        UTF-8 newline character). The key issue is that the pattern starts .*;
1057        this means that the match must be either at the beginning, or after a
1058        newline. The bug was in the code for advancing after a failed match and
1059        checking that the new position followed a newline. It was not taking
1060        account of UTF-8 characters correctly.
1061    
1062    23. PCRE was behaving differently from Perl in the way it recognized POSIX
1063        character classes. PCRE was not treating the sequence [:...:] as a
1064        character class unless the ... were all letters. Perl, however, seems to
1065        allow any characters between [: and :], though of course it rejects as
1066        unknown any "names" that contain non-letters, because all the known class
1067        names consist only of letters. Thus, Perl gives an error for [[:1234:]],
1068        for example, whereas PCRE did not - it did not recognize a POSIX character
1069        class. This seemed a bit dangerous, so the code has been changed to be
1070        closer to Perl. The behaviour is not identical to Perl, because PCRE will
1071        diagnose an unknown class for, for example, [[:l\ower:]] where Perl will
1072        treat it as [[:lower:]]. However, PCRE does now give "unknown" errors where
1073        Perl does, and where it didn't before.
1074    
1075    24. Rewrite so as to remove the single use of %n from pcregrep because in some
1076        Windows environments %n is disabled by default.
1077    
1078    
1079    Version 7.4 21-Sep-07
1080    ---------------------
1081    
1082    1.  Change 7.3/28 was implemented for classes by looking at the bitmap. This
1083        means that a class such as [\s] counted as "explicit reference to CR or
1084        LF". That isn't really right - the whole point of the change was to try to
1085        help when there was an actual mention of one of the two characters. So now
1086        the change happens only if \r or \n (or a literal CR or LF) character is
1087        encountered.
1088    
1089    2.  The 32-bit options word was also used for 6 internal flags, but the numbers
1090        of both had grown to the point where there were only 3 bits left.
1091        Fortunately, there was spare space in the data structure, and so I have
1092        moved the internal flags into a new 16-bit field to free up more option
1093        bits.
1094    
1095    3.  The appearance of (?J) at the start of a pattern set the DUPNAMES option,
1096        but did not set the internal JCHANGED flag - either of these is enough to
1097        control the way the "get" function works - but the PCRE_INFO_JCHANGED
1098        facility is supposed to tell if (?J) was ever used, so now (?J) at the
1099        start sets both bits.
1100    
1101    4.  Added options (at build time, compile time, exec time) to change \R from
1102        matching any Unicode line ending sequence to just matching CR, LF, or CRLF.
1103    
1104    5.  doc/pcresyntax.html was missing from the distribution.
1105    
1106    6.  Put back the definition of PCRE_ERROR_NULLWSLIMIT, for backward
1107        compatibility, even though it is no longer used.
1108    
1109    7.  Added macro for snprintf to pcrecpp_unittest.cc and also for strtoll and
1110        strtoull to pcrecpp.cc to select the available functions in WIN32 when the
1111        windows.h file is present (where different names are used). [This was
1112        reversed later after testing - see 16 below.]
1113    
1114    8.  Changed all #include <config.h> to #include "config.h". There were also
1115        some further <pcre.h> cases that I changed to "pcre.h".
1116    
1117    9.  When pcregrep was used with the --colour option, it missed the line ending
1118        sequence off the lines that it output.
1119    
1120    10. It was pointed out to me that arrays of string pointers cause lots of
1121        relocations when a shared library is dynamically loaded. A technique of
1122        using a single long string with a table of offsets can drastically reduce
1123        these. I have refactored PCRE in four places to do this. The result is
1124        dramatic:
1125    
1126          Originally:                          290
1127          After changing UCP table:            187
1128          After changing error message table:   43
1129          After changing table of "verbs"       36
1130          After changing table of Posix names   22
1131    
1132        Thanks to the folks working on Gregex for glib for this insight.
1133    
1134    11. --disable-stack-for-recursion caused compiling to fail unless -enable-
1135        unicode-properties was also set.
1136    
1137    12. Updated the tests so that they work when \R is defaulted to ANYCRLF.
1138    
1139    13. Added checks for ANY and ANYCRLF to pcrecpp.cc where it previously
1140        checked only for CRLF.
1141    
1142    14. Added casts to pcretest.c to avoid compiler warnings.
1143    
1144    15. Added Craig's patch to various pcrecpp modules to avoid compiler warnings.
1145    
1146    16. Added Craig's patch to remove the WINDOWS_H tests, that were not working,
1147        and instead check for _strtoi64 explicitly, and avoid the use of snprintf()
1148        entirely. This removes changes made in 7 above.
1149    
1150    17. The CMake files have been updated, and there is now more information about
1151        building with CMake in the NON-UNIX-USE document.
1152    
1153    
1154    Version 7.3 28-Aug-07
1155  ---------------------  ---------------------
1156    
1157   1. In the rejigging of the build system that eventually resulted in 7.1, the   1. In the rejigging of the build system that eventually resulted in 7.1, the

Legend:
Removed from v.227  
changed lines
  Added in v.581

webmaster@exim.org
ViewVC Help
Powered by ViewVC 1.1.12