/[pcre]/code/trunk/ChangeLog
ViewVC logotype

Diff of /code/trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 510 by ph10, Sat Mar 27 17:45:29 2010 UTC revision 616 by ph10, Mon Jul 11 15:55:25 2011 UTC
# Line 1  Line 1 
1  ChangeLog for PCRE  ChangeLog for PCRE
2  ------------------  ------------------
3    
4  Version 8.03 26-Mar-2010  Version 8.13 30-Apr-2011
5  ------------------------  ------------------------
6    
7  1.  Added support for (*MARK:ARG) and for ARG additions to PRUNE, SKIP, and  1.  The Unicode data tables have been updated to Unicode 6.0.0.
8    
9    2.  Two minor typos in pcre_internal.h have been fixed.
10    
11    3.  Added #include <string.h> to pcre_scanner_unittest.cc, pcrecpp.cc, and
12        pcrecpp_unittest.cc. They are needed for strcmp(), memset(), and strchr()
13        in some environments (e.g. Solaris 10/SPARC using Sun Studio 12U2).
14    
15    4.  There were a number of related bugs in the code for matching backrefences
16        caselessly in UTF-8 mode when codes for the characters concerned were
17        different numbers of bytes. For example, U+023A and U+2C65 are an upper
18        and lower case pair, using 2 and 3 bytes, respectively. The main bugs were:
19        (a) A reference to 3 copies of a 2-byte code matched only 2 of a 3-byte
20        code. (b) A reference to 2 copies of a 3-byte code would not match 2 of a
21        2-byte code at the end of the subject (it thought there wasn't enough data
22        left).
23    
24    5.  Comprehensive information about what went wrong is now returned by
25        pcre_exec() and pcre_dfa_exec() when the UTF-8 string check fails, as long
26        as the output vector has at least 2 elements. The offset of the start of
27        the failing character and a reason code are placed in the vector.
28    
29    6.  When the UTF-8 string check fails for pcre_compile(), the offset that is
30        now returned is for the first byte of the failing character, instead of the
31        last byte inspected. This is an incompatible change, but I hope it is small
32        enough not to be a problem. It makes the returned offset consistent with
33        pcre_exec() and pcre_dfa_exec().
34    
35    7.  pcretest now gives a text phrase as well as the error number when
36        pcre_exec() or pcre_dfa_exec() fails; if the error is a UTF-8 check
37        failure, the offset and reason code are output.
38    
39    8.  When \R was used with a maximizing quantifier it failed to skip backwards
40        over a \r\n pair if the subsequent match failed. Instead, it just skipped
41        back over a single character (\n). This seems wrong (because it treated the
42        two characters as a single entity when going forwards), conflicts with the
43        documentation that \R is equivalent to (?>\r\n|\n|...etc), and makes the
44        behaviour of \R* different to (\R)*, which also seems wrong. The behaviour
45        has been changed.
46    
47    9.  Some internal refactoring has changed the processing so that the handling
48        of the PCRE_CASELESS and PCRE_MULTILINE options is done entirely at compile
49        time (the PCRE_DOTALL option was changed this way some time ago: version
50        7.7 change 16). This has made it possible to abolish the OP_OPT op code,
51        which was always a bit of a fudge. It also means that there is one less
52        argument for the match() function, which reduces its stack requirements
53        slightly. This change also fixes an incompatibility with Perl: the pattern
54        (?i:([^b]))(?1) should not match "ab", but previously PCRE gave a match.
55    
56    10. More internal refactoring has drastically reduced the number of recursive
57        calls to match() for possessively repeated groups such as (abc)++ when
58        using pcre_exec().
59    
60    11. While implementing 10, a number of bugs in the handling of groups were
61        discovered and fixed:
62    
63        (?<=(a)+) was not diagnosed as invalid (non-fixed-length lookbehind).
64        (a|)*(?1) gave a compile-time internal error.
65        ((a|)+)+  did not notice that the outer group could match an empty string.
66        (^a|^)+   was not marked as anchored.
67        (.*a|.*)+ was not marked as matching at start or after a newline.
68    
69    12. Yet more internal refactoring has removed another argument from the match()
70        function. Special calls to this function are now indicated by setting a
71        value in a variable in the "match data" data block.
72    
73    13. Be more explicit in pcre_study() instead of relying on "default" for
74        opcodes that mean there is no starting character; this means that when new
75        ones are added and accidentally left out of pcre_study(), testing should
76        pick them up.
77    
78    14. The -s option of pcretest has been documented for ages as being an old
79        synonym of -m (show memory usage). I have changed it to mean "force study
80        for every regex", that is, assume /S for every regex. This is similar to -i
81        and -d etc. It's slightly incompatible, but I'm hoping nobody is still
82        using it. It makes it easier to run collections of tests with and without
83        study enabled, and thereby test pcre_study() more easily. All the standard
84        tests are now run with and without -s (but some patterns can be marked as
85        "never study" - see 20 below).
86    
87    15. When (*ACCEPT) was used in a subpattern that was called recursively, the
88        restoration of the capturing data to the outer values was not happening
89        correctly.
90    
91    16. If a recursively called subpattern ended with (*ACCEPT) and matched an
92        empty string, and PCRE_NOTEMPTY was set, pcre_exec() thought the whole
93        pattern had matched an empty string, and so incorrectly returned a no
94        match.
95    
96    17. There was optimizing code for the last branch of non-capturing parentheses,
97        and also for the obeyed branch of a conditional subexpression, which used
98        tail recursion to cut down on stack usage. Unfortunately, not that there is
99        the possibility of (*THEN) occurring in these branches, tail recursion is
100        no longer possible because the return has to be checked for (*THEN). These
101        two optimizations have therefore been removed.
102    
103    18. If a pattern containing \R was studied, it was assumed that \R always
104        matched two bytes, thus causing the minimum subject length to be
105        incorrectly computed because \R can also match just one byte.
106    
107    19. If a pattern containing (*ACCEPT) was studied, the minimum subject length
108        was incorrectly computed.
109    
110    20. If /S is present twice on a test pattern in pcretest input, it *disables*
111        studying, thereby overriding the use of -s on the command line. This is
112        necessary for one or two tests to keep the output identical in both cases.
113    
114    21. When (*ACCEPT) was used in an assertion that matched an empty string and
115        PCRE_NOTEMPTY was set, PCRE applied the non-empty test to the assertion.
116    
117    22. When an atomic group that contained a capturing parenthesis was
118        successfully matched, but the branch in which it appeared failed, the
119        capturing was not being forgotten if a higher numbered group was later
120        captured. For example, /(?>(a))b|(a)c/ when matching "ac" set capturing
121        group 1 to "a", when in fact it should be unset. This applied to multi-
122        branched capturing and non-capturing groups, repeated or not, and also to
123        positive assertions (capturing in negative assertions is not well defined
124        in PCRE) and also to nested atomic groups.
125    
126    23. Add the ++ qualifier feature to pcretest, to show the remainder of the
127        subject after a captured substring (to make it easier to tell which of a
128        number of identical substrings has been captured).
129    
130    
131    Version 8.12 15-Jan-2011
132    ------------------------
133    
134    1.  Fixed some typos in the markup of the man pages, and wrote a script that
135        checks for such things as part of the documentation building process.
136    
137    2.  On a big-endian 64-bit system, pcregrep did not correctly process the
138        --match-limit and --recursion-limit options (added for 8.11). In
139        particular, this made one of the standard tests fail. (The integer value
140        went into the wrong half of a long int.)
141    
142    3.  If the --colour option was given to pcregrep with -v (invert match), it
143        did strange things, either producing crazy output, or crashing. It should,
144        of course, ignore a request for colour when reporting lines that do not
145        match.
146    
147    4.  Another pcregrep bug caused similar problems if --colour was specified with
148        -M (multiline) and the pattern match finished with a line ending.
149    
150    5.  In pcregrep, when a pattern that ended with a literal newline sequence was
151        matched in multiline mode, the following line was shown as part of the
152        match. This seems wrong, so I have changed it.
153    
154    6.  Another pcregrep bug in multiline mode, when --colour was specified, caused
155        the check for further matches in the same line (so they could be coloured)
156        to overrun the end of the current line. If another match was found, it was
157        incorrectly shown (and then shown again when found in the next line).
158    
159    7.  If pcregrep was compiled under Windows, there was a reference to the
160        function pcregrep_exit() before it was defined. I am assuming this was
161        the cause of the "error C2371: 'pcregrep_exit' : redefinition;" that was
162        reported by a user. I've moved the definition above the reference.
163    
164    
165    Version 8.11 10-Dec-2010
166    ------------------------
167    
168    1.  (*THEN) was not working properly if there were untried alternatives prior
169        to it in the current branch. For example, in ((a|b)(*THEN)(*F)|c..) it
170        backtracked to try for "b" instead of moving to the next alternative branch
171        at the same level (in this case, to look for "c"). The Perl documentation
172        is clear that when (*THEN) is backtracked onto, it goes to the "next
173        alternative in the innermost enclosing group".
174    
175    2.  (*COMMIT) was not overriding (*THEN), as it does in Perl. In a pattern
176        such as   (A(*COMMIT)B(*THEN)C|D)  any failure after matching A should
177        result in overall failure. Similarly, (*COMMIT) now overrides (*PRUNE) and
178        (*SKIP), (*SKIP) overrides (*PRUNE) and (*THEN), and (*PRUNE) overrides
179        (*THEN).
180    
181    3.  If \s appeared in a character class, it removed the VT character from
182        the class, even if it had been included by some previous item, for example
183        in [\x00-\xff\s]. (This was a bug related to the fact that VT is not part
184        of \s, but is part of the POSIX "space" class.)
185    
186    4.  A partial match never returns an empty string (because you can always
187        match an empty string at the end of the subject); however the checking for
188        an empty string was starting at the "start of match" point. This has been
189        changed to the "earliest inspected character" point, because the returned
190        data for a partial match starts at this character. This means that, for
191        example, /(?<=abc)def/ gives a partial match for the subject "abc"
192        (previously it gave "no match").
193    
194    5.  Changes have been made to the way PCRE_PARTIAL_HARD affects the matching
195        of $, \z, \Z, \b, and \B. If the match point is at the end of the string,
196        previously a full match would be given. However, setting PCRE_PARTIAL_HARD
197        has an implication that the given string is incomplete (because a partial
198        match is preferred over a full match). For this reason, these items now
199        give a partial match in this situation. [Aside: previously, the one case
200        /t\b/ matched against "cat" with PCRE_PARTIAL_HARD set did return a partial
201        match rather than a full match, which was wrong by the old rules, but is
202        now correct.]
203    
204    6.  There was a bug in the handling of #-introduced comments, recognized when
205        PCRE_EXTENDED is set, when PCRE_NEWLINE_ANY and PCRE_UTF8 were also set.
206        If a UTF-8 multi-byte character included the byte 0x85 (e.g. +U0445, whose
207        UTF-8 encoding is 0xd1,0x85), this was misinterpreted as a newline when
208        scanning for the end of the comment. (*Character* 0x85 is an "any" newline,
209        but *byte* 0x85 is not, in UTF-8 mode). This bug was present in several
210        places in pcre_compile().
211    
212    7.  Related to (6) above, when pcre_compile() was skipping #-introduced
213        comments when looking ahead for named forward references to subpatterns,
214        the only newline sequence it recognized was NL. It now handles newlines
215        according to the set newline convention.
216    
217    8.  SunOS4 doesn't have strerror() or strtoul(); pcregrep dealt with the
218        former, but used strtoul(), whereas pcretest avoided strtoul() but did not
219        cater for a lack of strerror(). These oversights have been fixed.
220    
221    9.  Added --match-limit and --recursion-limit to pcregrep.
222    
223    10. Added two casts needed to build with Visual Studio when NO_RECURSE is set.
224    
225    11. When the -o option was used, pcregrep was setting a return code of 1, even
226        when matches were found, and --line-buffered was not being honoured.
227    
228    12. Added an optional parentheses number to the -o and --only-matching options
229        of pcregrep.
230    
231    13. Imitating Perl's /g action for multiple matches is tricky when the pattern
232        can match an empty string. The code to do it in pcretest and pcredemo
233        needed fixing:
234    
235        (a) When the newline convention was "crlf", pcretest got it wrong, skipping
236            only one byte after an empty string match just before CRLF (this case
237            just got forgotten; "any" and "anycrlf" were OK).
238    
239        (b) The pcretest code also had a bug, causing it to loop forever in UTF-8
240            mode when an empty string match preceded an ASCII character followed by
241            a non-ASCII character. (The code for advancing by one character rather
242            than one byte was nonsense.)
243    
244        (c) The pcredemo.c sample program did not have any code at all to handle
245            the cases when CRLF is a valid newline sequence.
246    
247    14. Neither pcre_exec() nor pcre_dfa_exec() was checking that the value given
248        as a starting offset was within the subject string. There is now a new
249        error, PCRE_ERROR_BADOFFSET, which is returned if the starting offset is
250        negative or greater than the length of the string. In order to test this,
251        pcretest is extended to allow the setting of negative starting offsets.
252    
253    15. In both pcre_exec() and pcre_dfa_exec() the code for checking that the
254        starting offset points to the beginning of a UTF-8 character was
255        unnecessarily clumsy. I tidied it up.
256    
257    16. Added PCRE_ERROR_SHORTUTF8 to make it possible to distinguish between a
258        bad UTF-8 sequence and one that is incomplete when using PCRE_PARTIAL_HARD.
259    
260    17. Nobody had reported that the --include_dir option, which was added in
261        release 7.7 should have been called --include-dir (hyphen, not underscore)
262        for compatibility with GNU grep. I have changed it to --include-dir, but
263        left --include_dir as an undocumented synonym, and the same for
264        --exclude-dir, though that is not available in GNU grep, at least as of
265        release 2.5.4.
266    
267    18. At a user's suggestion, the macros GETCHAR and friends (which pick up UTF-8
268        characters from a string of bytes) have been redefined so as not to use
269        loops, in order to improve performance in some environments. At the same
270        time, I abstracted some of the common code into auxiliary macros to save
271        repetition (this should not affect the compiled code).
272    
273    19. If \c was followed by a multibyte UTF-8 character, bad things happened. A
274        compile-time error is now given if \c is not followed by an ASCII
275        character, that is, a byte less than 128. (In EBCDIC mode, the code is
276        different, and any byte value is allowed.)
277    
278    20. Recognize (*NO_START_OPT) at the start of a pattern to set the PCRE_NO_
279        START_OPTIMIZE option, which is now allowed at compile time - but just
280        passed through to pcre_exec() or pcre_dfa_exec(). This makes it available
281        to pcregrep and other applications that have no direct access to PCRE
282        options. The new /Y option in pcretest sets this option when calling
283        pcre_compile().
284    
285    21. Change 18 of release 8.01 broke the use of named subpatterns for recursive
286        back references. Groups containing recursive back references were forced to
287        be atomic by that change, but in the case of named groups, the amount of
288        memory required was incorrectly computed, leading to "Failed: internal
289        error: code overflow". This has been fixed.
290    
291    22. Some patches to pcre_stringpiece.h, pcre_stringpiece_unittest.cc, and
292        pcretest.c, to avoid build problems in some Borland environments.
293    
294    
295    Version 8.10 25-Jun-2010
296    ------------------------
297    
298    1.  Added support for (*MARK:ARG) and for ARG additions to PRUNE, SKIP, and
299      THEN.      THEN.
300    
301    2.  (*ACCEPT) was not working when inside an atomic group.
302    
303    3.  Inside a character class, \B is treated as a literal by default, but
304        faulted if PCRE_EXTRA is set. This mimics Perl's behaviour (the -w option
305        causes the error). The code is unchanged, but I tidied the documentation.
306    
307    4.  Inside a character class, PCRE always treated \R and \X as literals,
308        whereas Perl faults them if its -w option is set. I have changed PCRE so
309        that it faults them when PCRE_EXTRA is set.
310    
311    5.  Added support for \N, which always matches any character other than
312        newline. (It is the same as "." when PCRE_DOTALL is not set.)
313    
314    6.  When compiling pcregrep with newer versions of gcc which may have
315        FORTIFY_SOURCE set, several warnings "ignoring return value of 'fwrite',
316        declared with attribute warn_unused_result" were given. Just casting the
317        result to (void) does not stop the warnings; a more elaborate fudge is
318        needed. I've used a macro to implement this.
319    
320    7.  Minor change to pcretest.c to avoid a compiler warning.
321    
322    8.  Added four artifical Unicode properties to help with an option to make
323        \s etc use properties (see next item). The new properties are: Xan
324        (alphanumeric), Xsp (Perl space), Xps (POSIX space), and Xwd (word).
325    
326    9.  Added PCRE_UCP to make \b, \d, \s, \w, and certain POSIX character classes
327        use Unicode properties. (*UCP) at the start of a pattern can be used to set
328        this option. Modified pcretest to add /W to test this facility. Added
329        REG_UCP to make it available via the POSIX interface.
330    
331    10. Added --line-buffered to pcregrep.
332    
333    11. In UTF-8 mode, if a pattern that was compiled with PCRE_CASELESS was
334        studied, and the match started with a letter with a code point greater than
335        127 whose first byte was different to the first byte of the other case of
336        the letter, the other case of this starting letter was not recognized
337        (#976).
338    
339    12. If a pattern that was studied started with a repeated Unicode property
340        test, for example, \p{Nd}+, there was the theoretical possibility of
341        setting up an incorrect bitmap of starting bytes, but fortunately it could
342        not have actually happened in practice until change 8 above was made (it
343        added property types that matched character-matching opcodes).
344    
345    13. pcre_study() now recognizes \h, \v, and \R when constructing a bit map of
346        possible starting bytes for non-anchored patterns.
347    
348    14. Extended the "auto-possessify" feature of pcre_compile(). It now recognizes
349        \R, and also a number of cases that involve Unicode properties, both
350        explicit and implicit when PCRE_UCP is set.
351    
352    15. If a repeated Unicode property match (e.g. \p{Lu}*) was used with non-UTF-8
353        input, it could crash or give wrong results if characters with values
354        greater than 0xc0 were present in the subject string. (Detail: it assumed
355        UTF-8 input when processing these items.)
356    
357    16. Added a lot of (int) casts to avoid compiler warnings in systems where
358        size_t is 64-bit (#991).
359    
360    17. Added a check for running out of memory when PCRE is compiled with
361        --disable-stack-for-recursion (#990).
362    
363    18. If the last data line in a file for pcretest does not have a newline on
364        the end, a newline was missing in the output.
365    
366    19. The default pcre_chartables.c file recognizes only ASCII characters (values
367        less than 128) in its various bitmaps. However, there is a facility for
368        generating tables according to the current locale when PCRE is compiled. It
369        turns out that in some environments, 0x85 and 0xa0, which are Unicode space
370        characters, are recognized by isspace() and therefore were getting set in
371        these tables, and indeed these tables seem to approximate to ISO 8859. This
372        caused a problem in UTF-8 mode when pcre_study() was used to create a list
373        of bytes that can start a match. For \s, it was including 0x85 and 0xa0,
374        which of course cannot start UTF-8 characters. I have changed the code so
375        that only real ASCII characters (less than 128) and the correct starting
376        bytes for UTF-8 encodings are set for characters greater than 127 when in
377        UTF-8 mode. (When PCRE_UCP is set - see 9 above - the code is different
378        altogether.)
379    
380    20. Added the /T option to pcretest so as to be able to run tests with non-
381        standard character tables, thus making it possible to include the tests
382        used for 19 above in the standard set of tests.
383    
384    21. A pattern such as (?&t)(?#()(?(DEFINE)(?<t>a)) which has a forward
385        reference to a subpattern the other side of a comment that contains an
386        opening parenthesis caused either an internal compiling error, or a
387        reference to the wrong subpattern.
388    
389    
390  Version 8.02 19-Mar-2010  Version 8.02 19-Mar-2010
391  ------------------------  ------------------------

Legend:
Removed from v.510  
changed lines
  Added in v.616

webmaster@exim.org
ViewVC Help
Powered by ViewVC 1.1.12