/[pcre]/code/trunk/ChangeLog
ViewVC logotype

Contents of /code/trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 561 - (hide annotations) (download)
Sat Oct 30 18:37:47 2010 UTC (3 years, 11 months ago) by ph10
File size: 192853 byte(s)
Added --match-limit and --recursion-limit to pcregrep; tidied some error 
messages.

1 nigel 3 ChangeLog for PCRE
2     ------------------
3    
4 ph10 550 Version 8.11 10-Oct-2010
5     ------------------------
6    
7     1. (*THEN) was not working properly if there were untried alternatives prior
8     to it in the current branch. For example, in ((a|b)(*THEN)(*F)|c..) it
9     backtracked to try for "b" instead of moving to the next alternative branch
10     at the same level (in this case, to look for "c"). The Perl documentation
11     is clear that when (*THEN) is backtracked onto, it goes to the "next
12     alternative in the innermost enclosing group".
13 ph10 551
14     2. (*COMMIT) was not overriding (*THEN), as it does in Perl. In a pattern
15     such as (A(*COMMIT)B(*THEN)C|D) any failure after matching A should
16     result in overall failure. Similarly, (*COMMIT) now overrides (*PRUNE) and
17     (*SKIP), (*SKIP) overrides (*PRUNE) and (*THEN), and (*PRUNE) overrides
18     (*THEN).
19 ph10 552
20     3. If \s appeared in a character class, it removed the VT character from
21     the class, even if it had been included by some previous item, for example
22     in [\x00-\xff\s]. (This was a bug related to the fact that VT is not part
23     of \s, but is part of the POSIX "space" class.)
24 ph10 553
25     4. A partial match never returns an empty string (because you can always
26     match an empty string at the end of the subject); however the checking for
27     an empty string was starting at the "start of match" point. This has been
28     changed to the "earliest inspected character" point, because the returned
29     data for a partial match starts at this character. This means that, for
30     example, /(?<=abc)def/ gives a partial match for the subject "abc"
31     (previously it gave "no match").
32 ph10 550
33 ph10 553 5. Changes have been made to the way PCRE_PARTIAL_HARD affects the matching
34     of $, \z, \Z, \b, and \B. If the match point is at the end of the string,
35     previously a full match would be given. However, setting PCRE_PARTIAL_HARD
36     has an implication that the given string is incomplete (because a partial
37     match is preferred over a full match). For this reason, these items now
38     give a partial match in this situation. [Aside: previously, the one case
39     /t\b/ matched against "cat" with PCRE_PARTIAL_HARD set did return a partial
40     match rather than a full match, which was wrong by the old rules, but is
41     now correct.]
42 ph10 556
43     6. There was a bug in the handling of #-introduced comments, recognized when
44     PCRE_EXTENDED is set, when PCRE_NEWLINE_ANY and PCRE_UTF8 were also set.
45     If a UTF-8 multi-byte character included the byte 0x85 (e.g. +U0445, whose
46     UTF-8 encoding is 0xd1,0x85), this was misinterpreted as a newline when
47     scanning for the end of the comment. (*Character* 0x85 is an "any" newline,
48     but *byte* 0x85 is not, in UTF-8 mode). This bug was present in several
49     places in pcre_compile().
50    
51     7. Related to (6) above, when pcre_compile() was skipping #-introduced
52     comments when looking ahead for named forward references to subpatterns,
53     the only newline sequence it recognized was NL. It now handles newlines
54     according to the set newline convention.
55 ph10 558
56     8. SunOS4 doesn't have strerror() or strtoul(); pcregrep dealt with the
57     former, but used strtoul(), whereas pcretest avoided strtoul() but did not
58     cater for a lack of strerror(). These oversights have been fixed.
59 ph10 561
60     9. Added --match-limit and --recursion-limit to pcregrep.
61 ph10 550
62 ph10 553
63 ph10 548 Version 8.10 25-Jun-2010
64 ph10 510 ------------------------
65    
66 ph10 512 1. Added support for (*MARK:ARG) and for ARG additions to PRUNE, SKIP, and
67 ph10 510 THEN.
68    
69 ph10 512 2. (*ACCEPT) was not working when inside an atomic group.
70 ph10 510
71 ph10 535 3. Inside a character class, \B is treated as a literal by default, but
72     faulted if PCRE_EXTRA is set. This mimics Perl's behaviour (the -w option
73 ph10 513 causes the error). The code is unchanged, but I tidied the documentation.
74 ph10 535
75     4. Inside a character class, PCRE always treated \R and \X as literals,
76 ph10 513 whereas Perl faults them if its -w option is set. I have changed PCRE so
77     that it faults them when PCRE_EXTRA is set.
78 ph10 535
79 ph10 514 5. Added support for \N, which always matches any character other than
80     newline. (It is the same as "." when PCRE_DOTALL is not set.)
81 ph10 535
82 ph10 515 6. When compiling pcregrep with newer versions of gcc which may have
83 ph10 535 FORTIFY_SOURCE set, several warnings "ignoring return value of 'fwrite',
84 ph10 515 declared with attribute warn_unused_result" were given. Just casting the
85 ph10 535 result to (void) does not stop the warnings; a more elaborate fudge is
86     needed. I've used a macro to implement this.
87 ph10 512
88 ph10 535 7. Minor change to pcretest.c to avoid a compiler warning.
89    
90 ph10 517 8. Added four artifical Unicode properties to help with an option to make
91 ph10 518 \s etc use properties (see next item). The new properties are: Xan
92     (alphanumeric), Xsp (Perl space), Xps (POSIX space), and Xwd (word).
93 ph10 535
94 ph10 518 9. Added PCRE_UCP to make \b, \d, \s, \w, and certain POSIX character classes
95 ph10 535 use Unicode properties. (*UCP) at the start of a pattern can be used to set
96 ph10 518 this option. Modified pcretest to add /W to test this facility. Added
97     REG_UCP to make it available via the POSIX interface.
98 ph10 513
99 ph10 535 10. Added --line-buffered to pcregrep.
100    
101     11. In UTF-8 mode, if a pattern that was compiled with PCRE_CASELESS was
102     studied, and the match started with a letter with a code point greater than
103 ph10 520 127 whose first byte was different to the first byte of the other case of
104 ph10 545 the letter, the other case of this starting letter was not recognized
105 ph10 536 (#976).
106 ph10 535
107 ph10 536 12. If a pattern that was studied started with a repeated Unicode property
108 ph10 523 test, for example, \p{Nd}+, there was the theoretical possibility of
109 ph10 535 setting up an incorrect bitmap of starting bytes, but fortunately it could
110     not have actually happened in practice until change 8 above was made (it
111 ph10 523 added property types that matched character-matching opcodes).
112 ph10 535
113 ph10 536 13. pcre_study() now recognizes \h, \v, and \R when constructing a bit map of
114 ph10 535 possible starting bytes for non-anchored patterns.
115    
116 ph10 536 14. Extended the "auto-possessify" feature of pcre_compile(). It now recognizes
117 ph10 535 \R, and also a number of cases that involve Unicode properties, both
118 ph10 532 explicit and implicit when PCRE_UCP is set.
119 ph10 529
120 ph10 536 15. If a repeated Unicode property match (e.g. \p{Lu}*) was used with non-UTF-8
121 ph10 535 input, it could crash or give wrong results if characters with values
122     greater than 0xc0 were present in the subject string. (Detail: it assumed
123 ph10 529 UTF-8 input when processing these items.)
124 ph10 535
125 ph10 536 16. Added a lot of (int) casts to avoid compiler warnings in systems where
126     size_t is 64-bit (#991).
127 ph10 535
128 ph10 536 17. Added a check for running out of memory when PCRE is compiled with
129     --disable-stack-for-recursion (#990).
130 ph10 545
131 ph10 537 18. If the last data line in a file for pcretest does not have a newline on
132 ph10 545 the end, a newline was missing in the output.
133    
134     19. The default pcre_chartables.c file recognizes only ASCII characters (values
135     less than 128) in its various bitmaps. However, there is a facility for
136     generating tables according to the current locale when PCRE is compiled. It
137     turns out that in some environments, 0x85 and 0xa0, which are Unicode space
138     characters, are recognized by isspace() and therefore were getting set in
139 ph10 541 these tables, and indeed these tables seem to approximate to ISO 8859. This
140     caused a problem in UTF-8 mode when pcre_study() was used to create a list
141     of bytes that can start a match. For \s, it was including 0x85 and 0xa0,
142     which of course cannot start UTF-8 characters. I have changed the code so
143     that only real ASCII characters (less than 128) and the correct starting
144 ph10 545 bytes for UTF-8 encodings are set for characters greater than 127 when in
145 ph10 541 UTF-8 mode. (When PCRE_UCP is set - see 9 above - the code is different
146     altogether.)
147 ph10 545
148 ph10 541 20. Added the /T option to pcretest so as to be able to run tests with non-
149     standard character tables, thus making it possible to include the tests
150 ph10 545 used for 19 above in the standard set of tests.
151    
152     21. A pattern such as (?&t)(?#()(?(DEFINE)(?<t>a)) which has a forward
153     reference to a subpattern the other side of a comment that contains an
154     opening parenthesis caused either an internal compiling error, or a
155 ph10 544 reference to the wrong subpattern.
156 ph10 517
157 ph10 520
158 ph10 508 Version 8.02 19-Mar-2010
159 ph10 491 ------------------------
160    
161     1. The Unicode data tables have been updated to Unicode 5.2.0.
162    
163 ph10 492 2. Added the option --libs-cpp to pcre-config, but only when C++ support is
164     configured.
165 ph10 507
166 ph10 493 3. Updated the licensing terms in the pcregexp.pas file, as agreed with the
167 ph10 507 original author of that file, following a query about its status.
168    
169     4. On systems that do not have stdint.h (e.g. Solaris), check for and include
170 ph10 494 inttypes.h instead. This fixes a bug that was introduced by change 8.01/8.
171 ph10 507
172 ph10 496 5. A pattern such as (?&t)*+(?(DEFINE)(?<t>.)) which has a possessive
173     quantifier applied to a forward-referencing subroutine call, could compile
174     incorrect code or give the error "internal error: previously-checked
175     referenced subpattern not found".
176 ph10 507
177     6. Both MS Visual Studio and Symbian OS have problems with initializing
178 ph10 497 variables to point to external functions. For these systems, therefore,
179     pcre_malloc etc. are now initialized to local functions that call the
180     relevant global functions.
181 ph10 507
182 ph10 498 7. There were two entries missing in the vectors called coptable and poptable
183     in pcre_dfa_exec.c. This could lead to memory accesses outsize the vectors.
184 ph10 507 I've fixed the data, and added a kludgy way of testing at compile time that
185     the lengths are correct (equal to the number of opcodes).
186    
187     8. Following on from 7, I added a similar kludge to check the length of the
188     eint vector in pcreposix.c.
189    
190     9. Error texts for pcre_compile() are held as one long string to avoid too
191     much relocation at load time. To find a text, the string is searched,
192 ph10 499 counting zeros. There was no check for running off the end of the string,
193     which could happen if a new error number was added without updating the
194 ph10 507 string.
195    
196     10. \K gave a compile-time error if it appeared in a lookbehind assersion.
197    
198 ph10 500 11. \K was not working if it appeared in an atomic group or in a group that
199 ph10 507 was called as a "subroutine", or in an assertion. Perl 5.11 documents that
200     \K is "not well defined" if used in an assertion. PCRE now accepts it if
201     the assertion is positive, but not if it is negative.
202    
203 ph10 501 12. Change 11 fortuitously reduced the size of the stack frame used in the
204 ph10 507 "match()" function of pcre_exec.c by one pointer. Forthcoming
205     implementation of support for (*MARK) will need an extra pointer on the
206 ph10 501 stack; I have reserved it now, so that the stack frame size does not
207     decrease.
208 ph10 507
209     13. A pattern such as (?P<L1>(?P<L2>0)|(?P>L2)(?P>L1)) in which the only other
210     item in branch that calls a recursion is a subroutine call - as in the
211 ph10 503 second branch in the above example - was incorrectly given the compile-
212     time error "recursive call could loop indefinitely" because pcre_compile()
213 ph10 507 was not correctly checking the subroutine for matching a non-empty string.
214    
215 ph10 505 14. The checks for overrunning compiling workspace could trigger after an
216 ph10 507 overrun had occurred. This is a "should never occur" error, but it can be
217 ph10 505 triggered by pathological patterns such as hundreds of nested parentheses.
218 ph10 507 The checks now trigger 100 bytes before the end of the workspace.
219 ph10 491
220 ph10 507 15. Fix typo in configure.ac: "srtoq" should be "strtoq".
221 ph10 492
222 ph10 507
223 ph10 489 Version 8.01 19-Jan-2010
224     ------------------------
225 ph10 471
226     1. If a pattern contained a conditional subpattern with only one branch (in
227 ph10 489 particular, this includes all (*DEFINE) patterns), a call to pcre_study()
228 ph10 473 computed the wrong minimum data length (which is of course zero for such
229 ph10 489 subpatterns). This could cause incorrect "no match" results.
230 ph10 473
231     2. For patterns such as (?i)a(?-i)b|c where an option setting at the start of
232 ph10 472 the pattern is reset in the first branch, pcre_compile() failed with
233     "internal error: code overflow at offset...". This happened only when
234 ph10 473 the reset was to the original external option setting. (An optimization
235     abstracts leading options settings into an external setting, which was the
236 ph10 472 cause of this.)
237 ph10 471
238 ph10 473 3. A pattern such as ^(?!a(*SKIP)b) where a negative assertion contained one
239     of the verbs SKIP, PRUNE, or COMMIT, did not work correctly. When the
240     assertion pattern did not match (meaning that the assertion was true), it
241     was incorrectly treated as false if the SKIP had been reached during the
242     matching. This also applied to assertions used as conditions.
243 ph10 471
244 ph10 473 4. If an item that is not supported by pcre_dfa_exec() was encountered in an
245     assertion subpattern, including such a pattern used as a condition,
246     unpredictable results occurred, instead of the error return
247     PCRE_ERROR_DFA_UITEM.
248 ph10 478
249 ph10 474 5. The C++ GlobalReplace function was not working like Perl for the special
250     situation when an empty string is matched. It now does the fancy magic
251 ph10 478 stuff that is necessary.
252    
253     6. In pcre_internal.h, obsolete includes to setjmp.h and stdarg.h have been
254 ph10 475 removed. (These were left over from very, very early versions of PCRE.)
255 ph10 478
256 ph10 475 7. Some cosmetic changes to the code to make life easier when compiling it
257     as part of something else:
258 ph10 478
259     (a) Change DEBUG to PCRE_DEBUG.
260    
261     (b) In pcre_compile(), rename the member of the "branch_chain" structure
262     called "current" as "current_branch", to prevent a collision with the
263 ph10 475 Linux macro when compiled as a kernel module.
264 ph10 478
265     (c) In pcre_study(), rename the function set_bit() as set_table_bit(), to
266     prevent a collision with the Linux macro when compiled as a kernel
267 ph10 475 module.
268 ph10 478
269 ph10 475 8. In pcre_compile() there are some checks for integer overflows that used to
270     cast potentially large values to (double). This has been changed to that
271 ph10 478 when building, a check for int64_t is made, and if it is found, it is used
272     instead, thus avoiding the use of floating point arithmetic. (There is no
273     other use of FP in PCRE.) If int64_t is not found, the fallback is to
274     double.
275    
276     9. Added two casts to avoid signed/unsigned warnings from VS Studio Express
277 ph10 476 2005 (difference between two addresses compared to an unsigned value).
278 ph10 473
279 ph10 478 10. Change the standard AC_CHECK_LIB test for libbz2 in configure.ac to a
280     custom one, because of the following reported problem in Windows:
281 ph10 473
282 ph10 478 - libbz2 uses the Pascal calling convention (WINAPI) for the functions
283 ph10 489 under Win32.
284 ph10 478 - The standard autoconf AC_CHECK_LIB fails to include "bzlib.h",
285 ph10 489 therefore missing the function definition.
286 ph10 478 - The compiler thus generates a "C" signature for the test function.
287     - The linker fails to find the "C" function.
288     - PCRE fails to configure if asked to do so against libbz2.
289 ph10 486
290 ph10 479 11. When running libtoolize from libtool-2.2.6b as part of autogen.sh, these
291     messages were output:
292 ph10 478
293 ph10 479 Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and
294     rerunning libtoolize, to keep the correct libtool macros in-tree.
295     Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
296 ph10 486
297 ph10 479 I have done both of these things.
298 ph10 486
299 ph10 480 12. Although pcre_dfa_exec() does not use nearly as much stack as pcre_exec()
300 ph10 486 most of the time, it *can* run out if it is given a pattern that contains a
301     runaway infinite recursion. I updated the discussion in the pcrestack man
302     page.
303    
304     13. Now that we have gone to the x.xx style of version numbers, the minor
305     version may start with zero. Using 08 or 09 is a bad idea because users
306     might check the value of PCRE_MINOR in their code, and 08 or 09 may be
307     interpreted as invalid octal numbers. I've updated the previous comment in
308     configure.ac, and also added a check that gives an error if 08 or 09 are
309 ph10 481 used.
310 ph10 486
311 ph10 482 14. Change 8.00/11 was not quite complete: code had been accidentally omitted,
312 ph10 483 causing partial matching to fail when the end of the subject matched \W
313     in a UTF-8 pattern where \W was quantified with a minimum of 3.
314 ph10 486
315 ph10 483 15. There were some discrepancies between the declarations in pcre_internal.h
316 ph10 486 of _pcre_is_newline(), _pcre_was_newline(), and _pcre_valid_utf8() and
317 ph10 483 their definitions. The declarations used "const uschar *" and the
318     definitions used USPTR. Even though USPTR is normally defined as "const
319     unsigned char *" (and uschar is typedeffed as "unsigned char"), it was
320     reported that: "This difference in casting confuses some C++ compilers, for
321     example, SunCC recognizes above declarations as different functions and
322 ph10 486 generates broken code for hbpcre." I have changed the declarations to use
323 ph10 483 USPTR.
324 ph10 486
325     16. GNU libtool is named differently on some systems. The autogen.sh script now
326 ph10 484 tries several variants such as glibtoolize (MacOSX) and libtoolize1x
327     (FreeBSD).
328 ph10 478
329 ph10 486 17. Applied Craig's patch that fixes an HP aCC compile error in pcre 8.00
330     (strtoXX undefined when compiling pcrecpp.cc). The patch contains this
331     comment: "Figure out how to create a longlong from a string: strtoll and
332     equivalent. It's not enough to call AC_CHECK_FUNCS: hpux has a strtoll, for
333     instance, but it only takes 2 args instead of 3!"
334 ph10 479
335 ph10 488 18. A subtle bug concerned with back references has been fixed by a change of
336     specification, with a corresponding code fix. A pattern such as
337     ^(xa|=?\1a)+$ which contains a back reference inside the group to which it
338     refers, was giving matches when it shouldn't. For example, xa=xaaa would
339     match that pattern. Interestingly, Perl (at least up to 5.11.3) has the
340     same bug. Such groups have to be quantified to be useful, or contained
341     inside another quantified group. (If there's no repetition, the reference
342     can never match.) The problem arises because, having left the group and
343     moved on to the rest of the pattern, a later failure that backtracks into
344     the group uses the captured value from the final iteration of the group
345     rather than the correct earlier one. I have fixed this in PCRE by forcing
346     any group that contains a reference to itself to be an atomic group; that
347     is, there cannot be any backtracking into it once it has completed. This is
348     similar to recursive and subroutine calls.
349 ph10 486
350 ph10 488
351 ph10 469 Version 8.00 19-Oct-09
352 ph10 418 ----------------------
353    
354     1. The table for translating pcre_compile() error codes into POSIX error codes
355 ph10 461 was out-of-date, and there was no check on the pcre_compile() error code
356     being within the table. This could lead to an OK return being given in
357 ph10 418 error.
358 ph10 461
359     2. Changed the call to open a subject file in pcregrep from fopen(pathname,
360     "r") to fopen(pathname, "rb"), which fixed a problem with some of the tests
361     in a Windows environment.
362    
363 ph10 420 3. The pcregrep --count option prints the count for each file even when it is
364     zero, as does GNU grep. However, pcregrep was also printing all files when
365     --files-with-matches was added. Now, when both options are given, it prints
366     counts only for those files that have at least one match. (GNU grep just
367 ph10 461 prints the file name in this circumstance, but including the count seems
368     more useful - otherwise, why use --count?) Also ensured that the
369 ph10 420 combination -clh just lists non-zero counts, with no names.
370 ph10 461
371     4. The long form of the pcregrep -F option was incorrectly implemented as
372     --fixed_strings instead of --fixed-strings. This is an incompatible change,
373     but it seems right to fix it, and I didn't think it was worth preserving
374     the old behaviour.
375    
376     5. The command line items --regex=pattern and --regexp=pattern were not
377 ph10 422 recognized by pcregrep, which required --regex pattern or --regexp pattern
378 ph10 461 (with a space rather than an '='). The man page documented the '=' forms,
379 ph10 422 which are compatible with GNU grep; these now work.
380 ph10 461
381     6. No libpcreposix.pc file was created for pkg-config; there was just
382 ph10 423 libpcre.pc and libpcrecpp.pc. The omission has been rectified.
383 ph10 461
384 ph10 425 7. Added #ifndef SUPPORT_UCP into the pcre_ucd.c module, to reduce its size
385 ph10 461 when UCP support is not needed, by modifying the Python script that
386 ph10 425 generates it from Unicode data files. This should not matter if the module
387     is correctly used as a library, but I received one complaint about 50K of
388     unwanted data. My guess is that the person linked everything into his
389     program rather than using a library. Anyway, it does no harm.
390 ph10 461
391 ph10 426 8. A pattern such as /\x{123}{2,2}+/8 was incorrectly compiled; the trigger
392 ph10 461 was a minimum greater than 1 for a wide character in a possessive
393 ph10 431 repetition. The same bug could also affect patterns like /(\x{ff}{0,2})*/8
394     which had an unlimited repeat of a nested, fixed maximum repeat of a wide
395     character. Chaos in the form of incorrect output or a compiling loop could
396     result.
397 ph10 461
398 ph10 426 9. The restrictions on what a pattern can contain when partial matching is
399 ph10 461 requested for pcre_exec() have been removed. All patterns can now be
400 ph10 426 partially matched by this function. In addition, if there are at least two
401 ph10 435 slots in the offset vector, the offset of the earliest inspected character
402     for the match and the offset of the end of the subject are set in them when
403 ph10 461 PCRE_ERROR_PARTIAL is returned.
404    
405 ph10 428 10. Partial matching has been split into two forms: PCRE_PARTIAL_SOFT, which is
406     synonymous with PCRE_PARTIAL, for backwards compatibility, and
407     PCRE_PARTIAL_HARD, which causes a partial match to supersede a full match,
408 ph10 462 and may be more useful for multi-segment matching.
409 ph10 461
410     11. Partial matching with pcre_exec() is now more intuitive. A partial match
411     used to be given if ever the end of the subject was reached; now it is
412     given only if matching could not proceed because another character was
413     needed. This makes a difference in some odd cases such as Z(*FAIL) with the
414     string "Z", which now yields "no match" instead of "partial match". In the
415     case of pcre_dfa_exec(), "no match" is given if every matching path for the
416     final character ended with (*FAIL).
417    
418 ph10 428 12. Restarting a match using pcre_dfa_exec() after a partial match did not work
419 ph10 461 if the pattern had a "must contain" character that was already found in the
420 ph10 428 earlier partial match, unless partial matching was again requested. For
421     example, with the pattern /dog.(body)?/, the "must contain" character is
422     "g". If the first part-match was for the string "dog", restarting with
423 ph10 435 "sbody" failed. This bug has been fixed.
424 ph10 461
425     13. The string returned by pcre_dfa_exec() after a partial match has been
426     changed so that it starts at the first inspected character rather than the
427     first character of the match. This makes a difference only if the pattern
428     starts with a lookbehind assertion or \b or \B (\K is not supported by
429     pcre_dfa_exec()). It's an incompatible change, but it makes the two
430 ph10 435 matching functions compatible, and I think it's the right thing to do.
431 ph10 461
432 ph10 435 14. Added a pcredemo man page, created automatically from the pcredemo.c file,
433 ph10 461 so that the demonstration program is easily available in environments where
434     PCRE has not been installed from source.
435    
436 ph10 435 15. Arranged to add -DPCRE_STATIC to cflags in libpcre.pc, libpcreposix.cp,
437 ph10 430 libpcrecpp.pc and pcre-config when PCRE is not compiled as a shared
438     library.
439 ph10 461
440 ph10 435 16. Added REG_UNGREEDY to the pcreposix interface, at the request of a user.
441 ph10 432 It maps to PCRE_UNGREEDY. It is not, of course, POSIX-compatible, but it
442 ph10 461 is not the first non-POSIX option to be added. Clearly some people find
443 ph10 433 these options useful.
444 ph10 461
445     17. If a caller to the POSIX matching function regexec() passes a non-zero
446 ph10 438 value for nmatch with a NULL value for pmatch, the value of
447 ph10 461 nmatch is forced to zero.
448    
449 ph10 437 18. RunGrepTest did not have a test for the availability of the -u option of
450 ph10 461 the diff command, as RunTest does. It now checks in the same way as
451 ph10 437 RunTest, and also checks for the -b option.
452 ph10 461
453 ph10 438 19. If an odd number of negated classes containing just a single character
454     interposed, within parentheses, between a forward reference to a named
455 ph10 461 subpattern and the definition of the subpattern, compilation crashed with
456     an internal error, complaining that it could not find the referenced
457 ph10 438 subpattern. An example of a crashing pattern is /(?&A)(([^m])(?<A>))/.
458 ph10 461 [The bug was that it was starting one character too far in when skipping
459     over the character class, thus treating the ] as data rather than
460     terminating the class. This meant it could skip too much.]
461    
462 ph10 442 20. Added PCRE_NOTEMPTY_ATSTART in order to be able to correctly implement the
463 ph10 461 /g option in pcretest when the pattern contains \K, which makes it possible
464 ph10 442 to have an empty string match not at the start, even when the pattern is
465 ph10 461 anchored. Updated pcretest and pcredemo to use this option.
466    
467 ph10 446 21. If the maximum number of capturing subpatterns in a recursion was greater
468 ph10 461 than the maximum at the outer level, the higher number was returned, but
469     with unset values at the outer level. The correct (outer level) value is
470 ph10 446 now given.
471 ph10 461
472 ph10 447 22. If (*ACCEPT) appeared inside capturing parentheses, previous releases of
473     PCRE did not set those parentheses (unlike Perl). I have now found a way to
474     make it do so. The string so far is captured, making this feature
475     compatible with Perl.
476 ph10 461
477     23. The tests have been re-organized, adding tests 11 and 12, to make it
478 ph10 448 possible to check the Perl 5.10 features against Perl 5.10.
479 ph10 461
480 ph10 454 24. Perl 5.10 allows subroutine calls in lookbehinds, as long as the subroutine
481 ph10 461 pattern matches a fixed length string. PCRE did not allow this; now it
482     does. Neither allows recursion.
483    
484     25. I finally figured out how to implement a request to provide the minimum
485     length of subject string that was needed in order to match a given pattern.
486     (It was back references and recursion that I had previously got hung up
487     on.) This code has now been added to pcre_study(); it finds a lower bound
488 ph10 455 to the length of subject needed. It is not necessarily the greatest lower
489     bound, but using it to avoid searching strings that are too short does give
490     some useful speed-ups. The value is available to calling programs via
491     pcre_fullinfo().
492 ph10 461
493 ph10 455 26. While implementing 25, I discovered to my embarrassment that pcretest had
494     not been passing the result of pcre_study() to pcre_dfa_exec(), so the
495     study optimizations had never been tested with that matching function.
496     Oops. What is worse, even when it was passed study data, there was a bug in
497     pcre_dfa_exec() that meant it never actually used it. Double oops. There
498     were also very few tests of studied patterns with pcre_dfa_exec().
499 ph10 461
500 ph10 457 27. If (?| is used to create subpatterns with duplicate numbers, they are now
501     allowed to have the same name, even if PCRE_DUPNAMES is not set. However,
502     on the other side of the coin, they are no longer allowed to have different
503     names, because these cannot be distinguished in PCRE, and this has caused
504     confusion. (This is a difference from Perl.)
505 ph10 461
506     28. When duplicate subpattern names are present (necessarily with different
507     numbers, as required by 27 above), and a test is made by name in a
508     conditional pattern, either for a subpattern having been matched, or for
509     recursion in such a pattern, all the associated numbered subpatterns are
510 ph10 459 tested, and the overall condition is true if the condition is true for any
511     one of them. This is the way Perl works, and is also more like the way
512     testing by number works.
513 ph10 418
514 ph10 461
515 ph10 412 Version 7.9 11-Apr-09
516 ph10 376 ---------------------
517    
518 ph10 392 1. When building with support for bzlib/zlib (pcregrep) and/or readline
519 ph10 376 (pcretest), all targets were linked against these libraries. This included
520     libpcre, libpcreposix, and libpcrecpp, even though they do not use these
521     libraries. This caused unwanted dependencies to be created. This problem
522 ph10 392 has been fixed, and now only pcregrep is linked with bzlib/zlib and only
523 ph10 376 pcretest is linked with readline.
524 ph10 392
525 ph10 376 2. The "typedef int BOOL" in pcre_internal.h that was included inside the
526     "#ifndef FALSE" condition by an earlier change (probably 7.8/18) has been
527     moved outside it again, because FALSE and TRUE are already defined in AIX,
528     but BOOL is not.
529 ph10 392
530     3. The pcre_config() function was treating the PCRE_MATCH_LIMIT and
531 ph10 409 PCRE_MATCH_LIMIT_RECURSION values as ints, when they should be long ints.
532 ph10 392
533 ph10 376 4. The pcregrep documentation said spaces were inserted as well as colons (or
534     hyphens) following file names and line numbers when outputting matching
535 ph10 392 lines. This is not true; no spaces are inserted. I have also clarified the
536 ph10 376 wording for the --colour (or --color) option.
537 ph10 392
538 ph10 378 5. In pcregrep, when --colour was used with -o, the list of matching strings
539     was not coloured; this is different to GNU grep, so I have changed it to be
540     the same.
541 ph10 392
542 ph10 378 6. When --colo(u)r was used in pcregrep, only the first matching substring in
543 ph10 392 each matching line was coloured. Now it goes on to look for further matches
544     of any of the test patterns, which is the same behaviour as GNU grep.
545    
546     7. A pattern that could match an empty string could cause pcregrep to loop; it
547     doesn't make sense to accept an empty string match in pcregrep, so I have
548 ph10 379 locked it out (using PCRE's PCRE_NOTEMPTY option). By experiment, this
549     seems to be how GNU grep behaves.
550 ph10 392
551 ph10 380 8. The pattern (?(?=.*b)b|^) was incorrectly compiled as "match must be at
552 ph10 392 start or after a newline", because the conditional assertion was not being
553     correctly handled. The rule now is that both the assertion and what follows
554     in the first alternative must satisfy the test.
555    
556 ph10 405 9. If auto-callout was enabled in a pattern with a conditional group whose
557 ph10 399 condition was an assertion, PCRE could crash during matching, both with
558     pcre_exec() and pcre_dfa_exec().
559 ph10 392
560     10. The PCRE_DOLLAR_ENDONLY option was not working when pcre_dfa_exec() was
561     used for matching.
562    
563     11. Unicode property support in character classes was not working for
564 ph10 385 characters (bytes) greater than 127 when not in UTF-8 mode.
565 ph10 388
566 ph10 392 12. Added the -M command line option to pcretest.
567    
568 ph10 388 14. Added the non-standard REG_NOTEMPTY option to the POSIX interface.
569 ph10 389
570     15. Added the PCRE_NO_START_OPTIMIZE match-time option.
571 ph10 390
572 ph10 392 16. Added comments and documentation about mis-use of no_arg in the C++
573 ph10 390 wrapper.
574 ph10 392
575 ph10 391 17. Implemented support for UTF-8 encoding in EBCDIC environments, a patch
576 ph10 392 from Martin Jerabek that uses macro names for all relevant character and
577 ph10 391 string constants.
578 ph10 405
579 ph10 393 18. Added to pcre_internal.h two configuration checks: (a) If both EBCDIC and
580     SUPPORT_UTF8 are set, give an error; (b) If SUPPORT_UCP is set without
581 ph10 405 SUPPORT_UTF8, define SUPPORT_UTF8. The "configure" script handles both of
582     these, but not everybody uses configure.
583    
584     19. A conditional group that had only one branch was not being correctly
585     recognized as an item that could match an empty string. This meant that an
586     enclosing group might also not be so recognized, causing infinite looping
587     (and probably a segfault) for patterns such as ^"((?(?=[a])[^"])|b)*"$
588     with the subject "ab", where knowledge that the repeated group can match
589 ph10 396 nothing is needed in order to break the loop.
590 ph10 405
591 ph10 397 20. If a pattern that was compiled with callouts was matched using pcre_dfa_
592 ph10 405 exec(), but without supplying a callout function, matching went wrong.
593    
594     21. If PCRE_ERROR_MATCHLIMIT occurred during a recursion, there was a memory
595     leak if the size of the offset vector was greater than 30. When the vector
596     is smaller, the saved offsets during recursion go onto a local stack
597     vector, but for larger vectors malloc() is used. It was failing to free
598     when the recursion yielded PCRE_ERROR_MATCH_LIMIT (or any other "abnormal"
599 ph10 400 error, in fact).
600 ph10 405
601 ph10 402 22. There was a missing #ifdef SUPPORT_UTF8 round one of the variables in the
602 ph10 405 heapframe that is used only when UTF-8 support is enabled. This caused no
603     problem, but was untidy.
604 ph10 376
605 ph10 405 23. Steven Van Ingelgem's patch to CMakeLists.txt to change the name
606     CMAKE_BINARY_DIR to PROJECT_BINARY_DIR so that it works when PCRE is
607     included within another project.
608 ph10 411
609 ph10 407 24. Steven Van Ingelgem's patches to add more options to the CMake support,
610     slightly modified by me:
611 ph10 411
612     (a) PCRE_BUILD_TESTS can be set OFF not to build the tests, including
613     not building pcregrep.
614    
615 ph10 407 (b) PCRE_BUILD_PCREGREP can be see OFF not to build pcregrep, but only
616 ph10 411 if PCRE_BUILD_TESTS is also set OFF, because the tests use pcregrep.
617    
618 ph10 408 25. Forward references, both numeric and by name, in patterns that made use of
619     duplicate group numbers, could behave incorrectly or give incorrect errors,
620     because when scanning forward to find the reference group, PCRE was not
621     taking into account the duplicate group numbers. A pattern such as
622     ^X(?3)(a)(?|(b)|(q))(Y) is an example.
623 ph10 411
624     26. Changed a few more instances of "const unsigned char *" to USPTR, making
625     the feature of a custom pointer more persuasive (as requested by a user).
626 ph10 416
627 ph10 411 27. Wrapped the definitions of fileno and isatty for Windows, which appear in
628 ph10 416 pcretest.c, inside #ifndefs, because it seems they are sometimes already
629     pre-defined.
630 ph10 392
631 ph10 416 28. Added support for (*UTF8) at the start of a pattern.
632    
633 ph10 413 29. Arrange for flags added by the "release type" setting in CMake to be shown
634     in the configuration summary.
635 ph10 405
636 ph10 411
637 ph10 374 Version 7.8 05-Sep-08
638 ph10 349 ---------------------
639    
640     1. Replaced UCP searching code with optimized version as implemented for Ad
641     Muncher (http://www.admuncher.com/) by Peter Kankowski. This uses a two-
642 ph10 351 stage table and inline lookup instead of a function, giving speed ups of 2
643     to 5 times on some simple patterns that I tested. Permission was given to
644     distribute the MultiStage2.py script that generates the tables (it's not in
645     the tarball, but is in the Subversion repository).
646 ph10 349
647 ph10 351 2. Updated the Unicode datatables to Unicode 5.1.0. This adds yet more
648     scripts.
649 ph10 358
650 ph10 353 3. Change 12 for 7.7 introduced a bug in pcre_study() when a pattern contained
651     a group with a zero qualifier. The result of the study could be incorrect,
652 ph10 358 or the function might crash, depending on the pattern.
653    
654     4. Caseless matching was not working for non-ASCII characters in back
655 ph10 354 references. For example, /(\x{de})\1/8i was not matching \x{de}\x{fe}.
656 ph10 358 It now works when Unicode Property Support is available.
657    
658 ph10 355 5. In pcretest, an escape such as \x{de} in the data was always generating
659     a UTF-8 string, even in non-UTF-8 mode. Now it generates a single byte in
660     non-UTF-8 mode. If the value is greater than 255, it gives a warning about
661 ph10 358 truncation.
662 ph10 349
663 ph10 358 6. Minor bugfix in pcrecpp.cc (change "" == ... to NULL == ...).
664    
665 ph10 357 7. Added two (int) casts to pcregrep when printing the difference of two
666     pointers, in case they are 64-bit values.
667 ph10 371
668     8. Added comments about Mac OS X stack usage to the pcrestack man page and to
669     test 2 if it fails.
670    
671 ph10 359 9. Added PCRE_CALL_CONVENTION just before the names of all exported functions,
672 ph10 371 and a #define of that name to empty if it is not externally set. This is to
673     allow users of MSVC to set it if necessary.
674    
675     10. The PCRE_EXP_DEFN macro which precedes exported functions was missing from
676 ph10 359 the convenience functions in the pcre_get.c source file.
677 ph10 371
678 ph10 360 11. An option change at the start of a pattern that had top-level alternatives
679     could cause overwriting and/or a crash. This command provoked a crash in
680 ph10 371 some environments:
681    
682     printf "/(?i)[\xc3\xa9\xc3\xbd]|[\xc3\xa9\xc3\xbdA]/8\n" | pcretest
683    
684 ph10 360 This potential security problem was recorded as CVE-2008-2371.
685 ph10 371
686 ph10 361 12. For a pattern where the match had to start at the beginning or immediately
687     after a newline (e.g /.*anything/ without the DOTALL flag), pcre_exec() and
688 ph10 371 pcre_dfa_exec() could read past the end of the passed subject if there was
689 ph10 361 no match. To help with detecting such bugs (e.g. with valgrind), I modified
690     pcretest so that it places the subject at the end of its malloc-ed buffer.
691 ph10 371
692 ph10 364 13. The change to pcretest in 12 above threw up a couple more cases when pcre_
693 ph10 371 exec() might read past the end of the data buffer in UTF-8 mode.
694    
695 ph10 364 14. A similar bug to 7.3/2 existed when the PCRE_FIRSTLINE option was set and
696 ph10 371 the data contained the byte 0x85 as part of a UTF-8 character within its
697     first line. This applied both to normal and DFA matching.
698    
699 ph10 366 15. Lazy qualifiers were not working in some cases in UTF-8 mode. For example,
700 ph10 371 /^[^d]*?$/8 failed to match "abc".
701 ph10 351
702 ph10 371 16. Added a missing copyright notice to pcrecpp_internal.h.
703    
704     17. Make it more clear in the documentation that values returned from
705 ph10 368 pcre_exec() in ovector are byte offsets, not character counts.
706 ph10 357
707 ph10 371 18. Tidied a few places to stop certain compilers from issuing warnings.
708 ph10 368
709 ph10 373 19. Updated the Virtual Pascal + BCC files to compile the latest v7.7, as
710     supplied by Stefan Weber. I made a further small update for 7.8 because
711 ph10 374 there is a change of source arrangements: the pcre_searchfuncs.c module is
712     replaced by pcre_ucd.c.
713 ph10 371
714 ph10 373
715 ph10 347 Version 7.7 07-May-08
716 ph10 321 ---------------------
717    
718     1. Applied Craig's patch to sort out a long long problem: "If we can't convert
719 ph10 345 a string to a long long, pretend we don't even have a long long." This is
720 ph10 321 done by checking for the strtoq, strtoll, and _strtoi64 functions.
721 ph10 345
722 ph10 322 2. Applied Craig's patch to pcrecpp.cc to restore ABI compatibility with
723     pre-7.6 versions, which defined a global no_arg variable instead of putting
724 ph10 332 it in the RE class. (See also #8 below.)
725 ph10 345
726     3. Remove a line of dead code, identified by coverity and reported by Nuno
727     Lopes.
728    
729 ph10 324 4. Fixed two related pcregrep bugs involving -r with --include or --exclude:
730 ph10 321
731 ph10 324 (1) The include/exclude patterns were being applied to the whole pathnames
732 ph10 345 of files, instead of just to the final components.
733    
734 ph10 324 (2) If there was more than one level of directory, the subdirectories were
735     skipped unless they satisfied the include/exclude conditions. This is
736     inconsistent with GNU grep (and could even be seen as contrary to the
737     pcregrep specification - which I improved to make it absolutely clear).
738     The action now is always to scan all levels of directory, and just
739     apply the include/exclude patterns to regular files.
740 ph10 345
741 ph10 325 5. Added the --include_dir and --exclude_dir patterns to pcregrep, and used
742 ph10 345 --exclude_dir in the tests to avoid scanning .svn directories.
743    
744 ph10 326 6. Applied Craig's patch to the QuoteMeta function so that it escapes the
745 ph10 345 NUL character as backslash + 0 rather than backslash + NUL, because PCRE
746 ph10 326 doesn't support NULs in patterns.
747 ph10 345
748     7. Added some missing "const"s to declarations of static tables in
749     pcre_compile.c and pcre_dfa_exec.c.
750    
751 ph10 328 8. Applied Craig's patch to pcrecpp.cc to fix a problem in OS X that was
752 ph10 329 caused by fix #2 above. (Subsequently also a second patch to fix the
753 ph10 345 first patch. And a third patch - this was a messy problem.)
754 ph10 321
755 ph10 345 9. Applied Craig's patch to remove the use of push_back().
756    
757 ph10 332 10. Applied Alan Lehotsky's patch to add REG_STARTEND support to the POSIX
758     matching function regexec().
759 ph10 345
760     11. Added support for the Oniguruma syntax \g<name>, \g<n>, \g'name', \g'n',
761     which, however, unlike Perl's \g{...}, are subroutine calls, not back
762 ph10 333 references. PCRE supports relative numbers with this syntax (I don't think
763     Oniguruma does).
764 ph10 345
765     12. Previously, a group with a zero repeat such as (...){0} was completely
766 ph10 335 omitted from the compiled regex. However, this means that if the group
767     was called as a subroutine from elsewhere in the pattern, things went wrong
768 ph10 345 (an internal error was given). Such groups are now left in the compiled
769     pattern, with a new opcode that causes them to be skipped at execution
770 ph10 335 time.
771 ph10 345
772 ph10 341 13. Added the PCRE_JAVASCRIPT_COMPAT option. This makes the following changes
773     to the way PCRE behaves:
774 ph10 345
775 ph10 336 (a) A lone ] character is dis-allowed (Perl treats it as data).
776 ph10 345
777     (b) A back reference to an unmatched subpattern matches an empty string
778 ph10 336 (Perl fails the current match path).
779 ph10 345
780 ph10 341 (c) A data ] in a character class must be notated as \] because if the
781 ph10 345 first data character in a class is ], it defines an empty class. (In
782 ph10 341 Perl it is not possible to have an empty class.) The empty class []
783     never matches; it forces failure and is equivalent to (*FAIL) or (?!).
784     The negative empty class [^] matches any one character, independently
785     of the DOTALL setting.
786 ph10 345
787     14. A pattern such as /(?2)[]a()b](abc)/ which had a forward reference to a
788 ph10 340 non-existent subpattern following a character class starting with ']' and
789     containing () gave an internal compiling error instead of "reference to
790     non-existent subpattern". Fortunately, when the pattern did exist, the
791 ph10 345 compiled code was correct. (When scanning forwards to check for the
792 ph10 340 existencd of the subpattern, it was treating the data ']' as terminating
793 ph10 345 the class, so got the count wrong. When actually compiling, the reference
794 ph10 340 was subsequently set up correctly.)
795 ph10 345
796 ph10 341 15. The "always fail" assertion (?!) is optimzed to (*FAIL) by pcre_compile;
797 ph10 345 it was being rejected as not supported by pcre_dfa_exec(), even though
798     other assertions are supported. I have made pcre_dfa_exec() support
799     (*FAIL).
800    
801 ph10 342 16. The implementation of 13c above involved the invention of a new opcode,
802 ph10 345 OP_ALLANY, which is like OP_ANY but doesn't check the /s flag. Since /s
803     cannot be changed at match time, I realized I could make a small
804     improvement to matching performance by compiling OP_ALLANY instead of
805     OP_ANY for "." when DOTALL was set, and then removing the runtime tests
806     on the OP_ANY path.
807    
808     17. Compiling pcretest on Windows with readline support failed without the
809 ph10 343 following two fixes: (1) Make the unistd.h include conditional on
810 ph10 345 HAVE_UNISTD_H; (2) #define isatty and fileno as _isatty and _fileno.
811    
812 ph10 344 18. Changed CMakeLists.txt and cmake/FindReadline.cmake to arrange for the
813 ph10 345 ncurses library to be included for pcretest when ReadLine support is
814     requested, but also to allow for it to be overridden. This patch came from
815     Daniel Bergström.
816 ph10 347
817 ph10 346 19. There was a typo in the file ucpinternal.h where f0_rangeflag was defined
818 ph10 347 as 0x00f00000 instead of 0x00800000. Luckily, this would not have caused
819     any errors with the current Unicode tables. Thanks to Peter Kankowski for
820     spotting this.
821 ph10 324
822 ph10 332
823 ph10 319 Version 7.6 28-Jan-08
824 ph10 300 ---------------------
825    
826 ph10 302 1. A character class containing a very large number of characters with
827     codepoints greater than 255 (in UTF-8 mode, of course) caused a buffer
828     overflow.
829 ph10 309
830     2. Patch to cut out the "long long" test in pcrecpp_unittest when
831     HAVE_LONG_LONG is not defined.
832    
833 ph10 303 3. Applied Christian Ehrlicher's patch to update the CMake build files to
834 ph10 304 bring them up to date and include new features. This patch includes:
835 ph10 309
836 ph10 304 - Fixed PH's badly added libz and libbz2 support.
837     - Fixed a problem with static linking.
838 ph10 312 - Added pcredemo. [But later removed - see 7 below.]
839 ph10 304 - Fixed dftables problem and added an option.
840     - Added a number of HAVE_XXX tests, including HAVE_WINDOWS_H and
841     HAVE_LONG_LONG.
842     - Added readline support for pcretest.
843 ph10 309 - Added an listing of the option settings after cmake has run.
844    
845 ph10 314 4. A user submitted a patch to Makefile that makes it easy to create
846     "pcre.dll" under mingw when using Configure/Make. I added stuff to
847     Makefile.am that cause it to include this special target, without
848     affecting anything else. Note that the same mingw target plus all
849     the other distribution libraries and programs are now supported
850     when configuring with CMake (see 6 below) instead of with
851     Configure/Make.
852 ph10 309
853 ph10 308 5. Applied Craig's patch that moves no_arg into the RE class in the C++ code.
854     This is an attempt to solve the reported problem "pcrecpp::no_arg is not
855 ph10 309 exported in the Windows port". It has not yet been confirmed that the patch
856     solves the problem, but it does no harm.
857 ph10 313
858 ph10 311 6. Applied Sheri's patch to CMakeLists.txt to add NON_STANDARD_LIB_PREFIX and
859 ph10 319 NON_STANDARD_LIB_SUFFIX for dll names built with mingw when configured
860 ph10 314 with CMake, and also correct the comment about stack recursion.
861 ph10 313
862 ph10 312 7. Remove the automatic building of pcredemo from the ./configure system and
863 ph10 313 from CMakeLists.txt. The whole idea of pcredemo.c is that it is an example
864     of a program that users should build themselves after PCRE is installed, so
865     building it automatically is not really right. What is more, it gave
866 ph10 312 trouble in some build environments.
867 ph10 300
868 ph10 319 8. Further tidies to CMakeLists.txt from Sheri and Christian.
869 ph10 308
870 ph10 319
871 ph10 298 Version 7.5 10-Jan-08
872 ph10 263 ---------------------
873    
874     1. Applied a patch from Craig: "This patch makes it possible to 'ignore'
875     values in parens when parsing an RE using the C++ wrapper."
876 ph10 286
877 ph10 264 2. Negative specials like \S did not work in character classes in UTF-8 mode.
878     Characters greater than 255 were excluded from the class instead of being
879     included.
880 ph10 286
881     3. The same bug as (2) above applied to negated POSIX classes such as
882 ph10 265 [:^space:].
883 ph10 286
884 ph10 267 4. PCRECPP_STATIC was referenced in pcrecpp_internal.h, but nowhere was it
885     defined or documented. It seems to have been a typo for PCRE_STATIC, so
886 ph10 286 I have changed it.
887    
888 ph10 268 5. The construct (?&) was not diagnosed as a syntax error (it referenced the
889 ph10 286 first named subpattern) and a construct such as (?&a) would reference the
890     first named subpattern whose name started with "a" (in other words, the
891 ph10 272 length check was missing). Both these problems are fixed. "Subpattern name
892     expected" is now given for (?&) (a zero-length name), and this patch also
893     makes it give the same error for \k'' (previously it complained that that
894     was a reference to a non-existent subpattern).
895 ph10 286
896 ph10 269 6. The erroneous patterns (?+-a) and (?-+a) give different error messages;
897 ph10 286 this is right because (?- can be followed by option settings as well as by
898 ph10 269 digits. I have, however, made the messages clearer.
899 ph10 286
900 ph10 270 7. Patterns such as (?(1)a|b) (a pattern that contains fewer subpatterns
901     than the number used in the conditional) now cause a compile-time error.
902     This is actually not compatible with Perl, which accepts such patterns, but
903     treats the conditional as always being FALSE (as PCRE used to), but it
904     seems to me that giving a diagnostic is better.
905 ph10 286
906 ph10 274 8. Change "alphameric" to the more common word "alphanumeric" in comments
907 ph10 275 and messages.
908 ph10 286
909     9. Fix two occurrences of "backslash" in comments that should have been
910     "backspace".
911    
912     10. Remove two redundant lines of code that can never be obeyed (their function
913     was moved elsewhere).
914    
915     11. The program that makes PCRE's Unicode character property table had a bug
916     which caused it to generate incorrect table entries for sequences of
917 ph10 277 characters that have the same character type, but are in different scripts.
918 ph10 286 It amalgamated them into a single range, with the script of the first of
919 ph10 277 them. In other words, some characters were in the wrong script. There were
920     thirteen such cases, affecting characters in the following ranges:
921 ph10 286
922 ph10 277 U+002b0 - U+002c1
923     U+0060c - U+0060d
924 ph10 286 U+0061e - U+00612
925 ph10 277 U+0064b - U+0065e
926     U+0074d - U+0076d
927     U+01800 - U+01805
928     U+01d00 - U+01d77
929     U+01d9b - U+01dbf
930     U+0200b - U+0200f
931     U+030fc - U+030fe
932     U+03260 - U+0327f
933     U+0fb46 - U+0fbb1
934     U+10450 - U+1049d
935 ph10 286
936 ph10 279 12. The -o option (show only the matching part of a line) for pcregrep was not
937     compatible with GNU grep in that, if there was more than one match in a
938     line, it showed only the first of them. It now behaves in the same way as
939     GNU grep.
940 ph10 286
941     13. If the -o and -v options were combined for pcregrep, it printed a blank
942     line for every non-matching line. GNU grep prints nothing, and pcregrep now
943     does the same. The return code can be used to tell if there were any
944     non-matching lines.
945    
946 ph10 289 14. Added --file-offsets and --line-offsets to pcregrep.
947    
948     15. The pattern (?=something)(?R) was not being diagnosed as a potentially
949 ph10 282 infinitely looping recursion. The bug was that positive lookaheads were not
950 ph10 286 being skipped when checking for a possible empty match (negative lookaheads
951     and both kinds of lookbehind were skipped).
952    
953 ph10 289 16. Fixed two typos in the Windows-only code in pcregrep.c, and moved the
954 ph10 284 inclusion of <windows.h> to before rather than after the definition of
955     INVALID_FILE_ATTRIBUTES (patch from David Byron).
956 ph10 263
957 ph10 289 17. Specifying a possessive quantifier with a specific limit for a Unicode
958 ph10 286 character property caused pcre_compile() to compile bad code, which led at
959     runtime to PCRE_ERROR_INTERNAL (-14). Examples of patterns that caused this
960     are: /\p{Zl}{2,3}+/8 and /\p{Cc}{2}+/8. It was the possessive "+" that
961     caused the error; without that there was no problem.
962 ph10 263
963 ph10 289 18. Added --enable-pcregrep-libz and --enable-pcregrep-libbz2.
964 ph10 286
965 ph10 289 19. Added --enable-pcretest-libreadline.
966 ph10 286
967 ph10 289 20. In pcrecpp.cc, the variable 'count' was incremented twice in
968 ph10 288 RE::GlobalReplace(). As a result, the number of replacements returned was
969 ph10 298 double what it should be. I removed one of the increments, but Craig sent a
970     later patch that removed the other one (the right fix) and added unit tests
971     that check the return values (which was not done before).
972 ph10 292
973 ph10 291 21. Several CMake things:
974 ph10 287
975 ph10 291 (1) Arranged that, when cmake is used on Unix, the libraries end up with
976 ph10 292 the names libpcre and libpcreposix, not just pcre and pcreposix.
977 ph10 288
978 ph10 292 (2) The above change means that pcretest and pcregrep are now correctly
979     linked with the newly-built libraries, not previously installed ones.
980 ph10 291
981 ph10 292 (3) Added PCRE_SUPPORT_LIBREADLINE, PCRE_SUPPORT_LIBZ, PCRE_SUPPORT_LIBBZ2.
982 ph10 298
983     22. In UTF-8 mode, with newline set to "any", a pattern such as .*a.*=.b.*
984     crashed when matching a string such as a\x{2029}b (note that \x{2029} is a
985     UTF-8 newline character). The key issue is that the pattern starts .*;
986     this means that the match must be either at the beginning, or after a
987     newline. The bug was in the code for advancing after a failed match and
988     checking that the new position followed a newline. It was not taking
989 ph10 294 account of UTF-8 characters correctly.
990 ph10 298
991     23. PCRE was behaving differently from Perl in the way it recognized POSIX
992     character classes. PCRE was not treating the sequence [:...:] as a
993     character class unless the ... were all letters. Perl, however, seems to
994     allow any characters between [: and :], though of course it rejects as
995     unknown any "names" that contain non-letters, because all the known class
996     names consist only of letters. Thus, Perl gives an error for [[:1234:]],
997     for example, whereas PCRE did not - it did not recognize a POSIX character
998     class. This seemed a bit dangerous, so the code has been changed to be
999     closer to Perl. The behaviour is not identical to Perl, because PCRE will
1000     diagnose an unknown class for, for example, [[:l\ower:]] where Perl will
1001     treat it as [[:lower:]]. However, PCRE does now give "unknown" errors where
1002     Perl does, and where it didn't before.
1003    
1004 ph10 296 24. Rewrite so as to remove the single use of %n from pcregrep because in some
1005     Windows environments %n is disabled by default.
1006 ph10 292
1007    
1008 ph10 260 Version 7.4 21-Sep-07
1009 ph10 230 ---------------------
1010    
1011     1. Change 7.3/28 was implemented for classes by looking at the bitmap. This
1012 ph10 231 means that a class such as [\s] counted as "explicit reference to CR or
1013     LF". That isn't really right - the whole point of the change was to try to
1014     help when there was an actual mention of one of the two characters. So now
1015     the change happens only if \r or \n (or a literal CR or LF) character is
1016 ph10 230 encountered.
1017 ph10 231
1018     2. The 32-bit options word was also used for 6 internal flags, but the numbers
1019     of both had grown to the point where there were only 3 bits left.
1020     Fortunately, there was spare space in the data structure, and so I have
1021     moved the internal flags into a new 16-bit field to free up more option
1022 ph10 230 bits.
1023 ph10 231
1024     3. The appearance of (?J) at the start of a pattern set the DUPNAMES option,
1025     but did not set the internal JCHANGED flag - either of these is enough to
1026     control the way the "get" function works - but the PCRE_INFO_JCHANGED
1027     facility is supposed to tell if (?J) was ever used, so now (?J) at the
1028 ph10 230 start sets both bits.
1029    
1030 ph10 231 4. Added options (at build time, compile time, exec time) to change \R from
1031     matching any Unicode line ending sequence to just matching CR, LF, or CRLF.
1032 ph10 230
1033 ph10 243 5. doc/pcresyntax.html was missing from the distribution.
1034    
1035     6. Put back the definition of PCRE_ERROR_NULLWSLIMIT, for backward
1036 ph10 233 compatibility, even though it is no longer used.
1037 ph10 243
1038     7. Added macro for snprintf to pcrecpp_unittest.cc and also for strtoll and
1039 ph10 254 strtoull to pcrecpp.cc to select the available functions in WIN32 when the
1040 ph10 259 windows.h file is present (where different names are used). [This was
1041 ph10 257 reversed later after testing - see 16 below.]
1042 ph10 243
1043     8. Changed all #include <config.h> to #include "config.h". There were also
1044 ph10 236 some further <pcre.h> cases that I changed to "pcre.h".
1045 ph10 243
1046 ph10 239 9. When pcregrep was used with the --colour option, it missed the line ending
1047 ph10 243 sequence off the lines that it output.
1048    
1049     10. It was pointed out to me that arrays of string pointers cause lots of
1050     relocations when a shared library is dynamically loaded. A technique of
1051     using a single long string with a table of offsets can drastically reduce
1052     these. I have refactored PCRE in four places to do this. The result is
1053 ph10 240 dramatic:
1054 ph10 243
1055 ph10 240 Originally: 290
1056     After changing UCP table: 187
1057 ph10 243 After changing error message table: 43
1058 ph10 240 After changing table of "verbs" 36
1059     After changing table of Posix names 22
1060 ph10 243
1061 ph10 240 Thanks to the folks working on Gregex for glib for this insight.
1062 ph10 247
1063 ph10 244 11. --disable-stack-for-recursion caused compiling to fail unless -enable-
1064 ph10 247 unicode-properties was also set.
1065    
1066 ph10 248 12. Updated the tests so that they work when \R is defaulted to ANYCRLF.
1067 ph10 231
1068 ph10 253 13. Added checks for ANY and ANYCRLF to pcrecpp.cc where it previously
1069     checked only for CRLF.
1070 ph10 233
1071 ph10 259 14. Added casts to pcretest.c to avoid compiler warnings.
1072    
1073 ph10 256 15. Added Craig's patch to various pcrecpp modules to avoid compiler warnings.
1074 ph10 253
1075 ph10 257 16. Added Craig's patch to remove the WINDOWS_H tests, that were not working,
1076 ph10 259 and instead check for _strtoi64 explicitly, and avoid the use of snprintf()
1077     entirely. This removes changes made in 7 above.
1078 ph10 256
1079 ph10 261 17. The CMake files have been updated, and there is now more information about
1080     building with CMake in the NON-UNIX-USE document.
1081 ph10 257
1082 ph10 261
1083 ph10 228 Version 7.3 28-Aug-07
1084 ph10 157 ---------------------
1085    
1086 ph10 189 1. In the rejigging of the build system that eventually resulted in 7.1, the
1087     line "#include <pcre.h>" was included in pcre_internal.h. The use of angle
1088     brackets there is not right, since it causes compilers to look for an
1089     installed pcre.h, not the version that is in the source that is being
1090     compiled (which of course may be different). I have changed it back to:
1091 ph10 197
1092 ph10 189 #include "pcre.h"
1093 ph10 197
1094     I have a vague recollection that the change was concerned with compiling in
1095     different directories, but in the new build system, that is taken care of
1096     by the VPATH setting the Makefile.
1097    
1098 ph10 190 2. The pattern .*$ when run in not-DOTALL UTF-8 mode with newline=any failed
1099     when the subject happened to end in the byte 0x85 (e.g. if the last
1100     character was \x{1ec5}). *Character* 0x85 is one of the "any" newline
1101     characters but of course it shouldn't be taken as a newline when it is part
1102     of another character. The bug was that, for an unlimited repeat of . in
1103     not-DOTALL UTF-8 mode, PCRE was advancing by bytes rather than by
1104     characters when looking for a newline.
1105 ph10 197
1106     3. A small performance improvement in the DOTALL UTF-8 mode .* case.
1107    
1108     4. Debugging: adjusted the names of opcodes for different kinds of parentheses
1109     in debug output.
1110    
1111 ph10 201 5. Arrange to use "%I64d" instead of "%lld" and "%I64u" instead of "%llu" for
1112     long printing in the pcrecpp unittest when running under MinGW.
1113 ph10 189
1114 ph10 197 6. ESC_K was left out of the EBCDIC table.
1115 ph10 189
1116 ph10 197 7. Change 7.0/38 introduced a new limit on the number of nested non-capturing
1117     parentheses; I made it 1000, which seemed large enough. Unfortunately, the
1118     limit also applies to "virtual nesting" when a pattern is recursive, and in
1119     this case 1000 isn't so big. I have been able to remove this limit at the
1120     expense of backing off one optimization in certain circumstances. Normally,
1121     when pcre_exec() would call its internal match() function recursively and
1122     immediately return the result unconditionally, it uses a "tail recursion"
1123     feature to save stack. However, when a subpattern that can match an empty
1124     string has an unlimited repetition quantifier, it no longer makes this
1125     optimization. That gives it a stack frame in which to save the data for
1126     checking that an empty string has been matched. Previously this was taken
1127     from the 1000-entry workspace that had been reserved. So now there is no
1128     explicit limit, but more stack is used.
1129 ph10 189
1130 ph10 200 8. Applied Daniel's patches to solve problems with the import/export magic
1131     syntax that is required for Windows, and which was going wrong for the
1132     pcreposix and pcrecpp parts of the library. These were overlooked when this
1133     problem was solved for the main library.
1134 ph10 197
1135 ph10 202 9. There were some crude static tests to avoid integer overflow when computing
1136     the size of patterns that contain repeated groups with explicit upper
1137     limits. As the maximum quantifier is 65535, the maximum group length was
1138     set at 30,000 so that the product of these two numbers did not overflow a
1139     32-bit integer. However, it turns out that people want to use groups that
1140     are longer than 30,000 bytes (though not repeat them that many times).
1141     Change 7.0/17 (the refactoring of the way the pattern size is computed) has
1142     made it possible to implement the integer overflow checks in a much more
1143     dynamic way, which I have now done. The artificial limitation on group
1144     length has been removed - we now have only the limit on the total length of
1145     the compiled pattern, which depends on the LINK_SIZE setting.
1146 ph10 208
1147     10. Fixed a bug in the documentation for get/copy named substring when
1148     duplicate names are permitted. If none of the named substrings are set, the
1149     functions return PCRE_ERROR_NOSUBSTRING (7); the doc said they returned an
1150     empty string.
1151    
1152     11. Because Perl interprets \Q...\E at a high level, and ignores orphan \E
1153     instances, patterns such as [\Q\E] or [\E] or even [^\E] cause an error,
1154     because the ] is interpreted as the first data character and the
1155     terminating ] is not found. PCRE has been made compatible with Perl in this
1156     regard. Previously, it interpreted [\Q\E] as an empty class, and [\E] could
1157     cause memory overwriting.
1158    
1159 ph10 206 10. Like Perl, PCRE automatically breaks an unlimited repeat after an empty
1160     string has been matched (to stop an infinite loop). It was not recognizing
1161 ph10 208 a conditional subpattern that could match an empty string if that
1162 ph10 206 subpattern was within another subpattern. For example, it looped when
1163 ph10 208 trying to match (((?(1)X|))*) but it was OK with ((?(1)X|)*) where the
1164 ph10 206 condition was not nested. This bug has been fixed.
1165 ph10 208
1166 ph10 207 12. A pattern like \X?\d or \P{L}?\d in non-UTF-8 mode could cause a backtrack
1167     past the start of the subject in the presence of bytes with the top bit
1168     set, for example "\x8aBCD".
1169 ph10 211
1170 ph10 210 13. Added Perl 5.10 experimental backtracking controls (*FAIL), (*F), (*PRUNE),
1171     (*SKIP), (*THEN), (*COMMIT), and (*ACCEPT).
1172 ph10 200
1173 ph10 211 14. Optimized (?!) to (*FAIL).
1174 ph10 202
1175 ph10 212 15. Updated the test for a valid UTF-8 string to conform to the later RFC 3629.
1176     This restricts code points to be within the range 0 to 0x10FFFF, excluding
1177     the "low surrogate" sequence 0xD800 to 0xDFFF. Previously, PCRE allowed the
1178     full range 0 to 0x7FFFFFFF, as defined by RFC 2279. Internally, it still
1179     does: it's just the validity check that is more restrictive.
1180 ph10 220
1181     16. Inserted checks for integer overflows during escape sequence (backslash)
1182     processing, and also fixed erroneous offset values for syntax errors during
1183     backslash processing.
1184    
1185 ph10 214 17. Fixed another case of looking too far back in non-UTF-8 mode (cf 12 above)
1186 ph10 220 for patterns like [\PPP\x8a]{1,}\x80 with the subject "A\x80".
1187    
1188 ph10 215 18. An unterminated class in a pattern like (?1)\c[ with a "forward reference"
1189     caused an overrun.
1190 ph10 220
1191     19. A pattern like (?:[\PPa*]*){8,} which had an "extended class" (one with
1192     something other than just ASCII characters) inside a group that had an
1193     unlimited repeat caused a loop at compile time (while checking to see
1194     whether the group could match an empty string).
1195    
1196 ph10 217 20. Debugging a pattern containing \p or \P could cause a crash. For example,
1197     [\P{Any}] did so. (Error in the code for printing property names.)
1198 ph10 210
1199 ph10 220 21. An orphan \E inside a character class could cause a crash.
1200    
1201     22. A repeated capturing bracket such as (A)? could cause a wild memory
1202 ph10 218 reference during compilation.
1203 ph10 220
1204     23. There are several functions in pcre_compile() that scan along a compiled
1205     expression for various reasons (e.g. to see if it's fixed length for look
1206 ph10 218 behind). There were bugs in these functions when a repeated \p or \P was
1207 ph10 220 present in the pattern. These operators have additional parameters compared
1208     with \d, etc, and these were not being taken into account when moving along
1209 ph10 218 the compiled data. Specifically:
1210 ph10 220
1211     (a) A item such as \p{Yi}{3} in a lookbehind was not treated as fixed
1212     length.
1213    
1214     (b) An item such as \pL+ within a repeated group could cause crashes or
1215 ph10 218 loops.
1216 ph10 220
1217 ph10 218 (c) A pattern such as \p{Yi}+(\P{Yi}+)(?1) could give an incorrect
1218 ph10 220 "reference to non-existent subpattern" error.
1219    
1220 ph10 221 (d) A pattern like (\P{Yi}{2}\277)? could loop at compile time.
1221    
1222 ph10 219 24. A repeated \S or \W in UTF-8 mode could give wrong answers when multibyte
1223 ph10 220 characters were involved (for example /\S{2}/8g with "A\x{a3}BC").
1224 ph10 211
1225 ph10 222 25. Using pcregrep in multiline, inverted mode (-Mv) caused it to loop.
1226 ph10 218
1227 ph10 227 26. Patterns such as [\P{Yi}A] which include \p or \P and just one other
1228 ph10 223 character were causing crashes (broken optimization).
1229 ph10 227
1230 ph10 224 27. Patterns such as (\P{Yi}*\277)* (group with possible zero repeat containing
1231 ph10 227 \p or \P) caused a compile-time loop.
1232    
1233 ph10 226 28. More problems have arisen in unanchored patterns when CRLF is a valid line
1234     break. For example, the unstudied pattern [\r\n]A does not match the string
1235     "\r\nA" because change 7.0/46 below moves the current point on by two
1236     characters after failing to match at the start. However, the pattern \nA
1237 ph10 227 *does* match, because it doesn't start till \n, and if [\r\n]A is studied,
1238     the same is true. There doesn't seem any very clean way out of this, but
1239     what I have chosen to do makes the common cases work: PCRE now takes note
1240     of whether there can be an explicit match for \r or \n anywhere in the
1241     pattern, and if so, 7.0/46 no longer applies. As part of this change,
1242     there's a new PCRE_INFO_HASCRORLF option for finding out whether a compiled
1243     pattern has explicit CR or LF references.
1244 ph10 222
1245 ph10 227 29. Added (*CR) etc for changing newline setting at start of pattern.
1246 ph10 223
1247 ph10 227
1248 ph10 189 Version 7.2 19-Jun-07
1249     ---------------------
1250    
1251 ph10 157 1. If the fr_FR locale cannot be found for test 3, try the "french" locale,
1252     which is apparently normally available under Windows.
1253 ph10 159
1254     2. Re-jig the pcregrep tests with different newline settings in an attempt
1255     to make them independent of the local environment's newline setting.
1256 ph10 157
1257 ph10 160 3. Add code to configure.ac to remove -g from the CFLAGS default settings.
1258 ph10 165
1259 ph10 161 4. Some of the "internals" tests were previously cut out when the link size
1260     was not 2, because the output contained actual offsets. The recent new
1261 ph10 165 "Z" feature of pcretest means that these can be cut out, making the tests
1262     usable with all link sizes.
1263    
1264 ph10 164 5. Implemented Stan Switzer's goto replacement for longjmp() when not using
1265     stack recursion. This gives a massive performance boost under BSD, but just
1266 ph10 165 a small improvement under Linux. However, it saves one field in the frame
1267 ph10 164 in all cases.
1268 ph10 172
1269 ph10 166 6. Added more features from the forthcoming Perl 5.10:
1270 ph10 172
1271 ph10 166 (a) (?-n) (where n is a string of digits) is a relative subroutine or
1272     recursion call. It refers to the nth most recently opened parentheses.
1273 ph10 172
1274 ph10 166 (b) (?+n) is also a relative subroutine call; it refers to the nth next
1275 ph10 172 to be opened parentheses.
1276    
1277     (c) Conditions that refer to capturing parentheses can be specified
1278 ph10 167 relatively, for example, (?(-2)... or (?(+3)...
1279 ph10 172
1280 ph10 168 (d) \K resets the start of the current match so that everything before
1281 ph10 172 is not part of it.
1282    
1283 ph10 171 (e) \k{name} is synonymous with \k<name> and \k'name' (.NET compatible).
1284 ph10 172
1285 ph10 171 (f) \g{name} is another synonym - part of Perl 5.10's unification of
1286 ph10 172 reference syntax.
1287 ph10 182
1288 ph10 175 (g) (?| introduces a group in which the numbering of parentheses in each
1289 ph10 182 alternative starts with the same number.
1290 ph10 172
1291 ph10 182 (h) \h, \H, \v, and \V match horizontal and vertical whitespace.
1292    
1293 ph10 172 7. Added two new calls to pcre_fullinfo(): PCRE_INFO_OKPARTIAL and
1294     PCRE_INFO_JCHANGED.
1295    
1296     8. A pattern such as (.*(.)?)* caused pcre_exec() to fail by either not
1297     terminating or by crashing. Diagnosed by Viktor Griph; it was in the code
1298 ph10 170 for detecting groups that can match an empty string.
1299 ph10 159
1300 ph10 172 9. A pattern with a very large number of alternatives (more than several
1301     hundred) was running out of internal workspace during the pre-compile
1302     phase, where pcre_compile() figures out how much memory will be needed. A
1303     bit of new cunning has reduced the workspace needed for groups with
1304     alternatives. The 1000-alternative test pattern now uses 12 bytes of
1305     workspace instead of running out of the 4096 that are available.
1306 ph10 182
1307 ph10 176 10. Inserted some missing (unsigned int) casts to get rid of compiler warnings.
1308 ph10 172
1309 ph10 179 11. Applied patch from Google to remove an optimization that didn't quite work.
1310     The report of the bug said:
1311 ph10 182
1312 ph10 179 pcrecpp::RE("a*").FullMatch("aaa") matches, while
1313     pcrecpp::RE("a*?").FullMatch("aaa") does not, and
1314 ph10 182 pcrecpp::RE("a*?\\z").FullMatch("aaa") does again.
1315 ph10 185
1316 ph10 184 12. If \p or \P was used in non-UTF-8 mode on a character greater than 127
1317 ph10 185 it matched the wrong number of bytes.
1318 ph10 172
1319 ph10 179
1320 ph10 155 Version 7.1 24-Apr-07
1321 ph10 98 ---------------------
1322    
1323 ph10 111 1. Applied Bob Rossi and Daniel G's patches to convert the build system to one
1324 ph10 122 that is more "standard", making use of automake and other Autotools. There
1325 ph10 99 is some re-arrangement of the files and adjustment of comments consequent
1326     on this.
1327 ph10 111
1328     2. Part of the patch fixed a problem with the pcregrep tests. The test of -r
1329     for recursive directory scanning broke on some systems because the files
1330     are not scanned in any specific order and on different systems the order
1331     was different. A call to "sort" has been inserted into RunGrepTest for the
1332     approprate test as a short-term fix. In the longer term there may be an
1333 ph10 100 alternative.
1334 ph10 111
1335 ph10 100 3. I had an email from Eric Raymond about problems translating some of PCRE's
1336 ph10 111 man pages to HTML (despite the fact that I distribute HTML pages, some
1337     people do their own conversions for various reasons). The problems
1338     concerned the use of low-level troff macros .br and .in. I have therefore
1339     removed all such uses from the man pages (some were redundant, some could
1340 ph10 113 be replaced by .nf/.fi pairs). The 132html script that I use to generate
1341     HTML has been updated to handle .nf/.fi and to complain if it encounters
1342     .br or .in.
1343 ph10 111
1344 ph10 100 4. Updated comments in configure.ac that get placed in config.h.in and also
1345 ph10 123 arranged for config.h to be included in the distribution, with the name
1346 ph10 111 config.h.generic, for the benefit of those who have to compile without
1347     Autotools (compare pcre.h, which is now distributed as pcre.h.generic).
1348    
1349     5. Updated the support (such as it is) for Virtual Pascal, thanks to Stefan
1350     Weber: (1) pcre_internal.h was missing some function renames; (2) updated
1351 ph10 127 makevp.bat for the current PCRE, using the additional files
1352 ph10 135 makevp_c.txt, makevp_l.txt, and pcregexp.pas.
1353 ph10 111
1354     6. A Windows user reported a minor discrepancy with test 2, which turned out
1355     to be caused by a trailing space on an input line that had got lost in his
1356 ph10 102 copy. The trailing space was an accident, so I've just removed it.
1357 ph10 111
1358 ph10 104 7. Add -Wl,-R... flags in pcre-config.in for *BSD* systems, as I'm told
1359 ph10 111 that is needed.
1360    
1361 ph10 105 8. Mark ucp_table (in ucptable.h) and ucp_gentype (in pcre_ucp_searchfuncs.c)
1362     as "const" (a) because they are and (b) because it helps the PHP
1363     maintainers who have recently made a script to detect big data structures
1364 ph10 111 in the php code that should be moved to the .rodata section. I remembered
1365     to update Builducptable as well, so it won't revert if ucptable.h is ever
1366 ph10 105 re-created.
1367 ph10 111
1368     9. Added some extra #ifdef SUPPORT_UTF8 conditionals into pcretest.c,
1369 ph10 107 pcre_printint.src, pcre_compile.c, pcre_study.c, and pcre_tables.c, in
1370 ph10 111 order to be able to cut out the UTF-8 tables in the latter when UTF-8
1371     support is not required. This saves 1.5-2K of code, which is important in
1372 ph10 107 some applications.
1373 ph10 111
1374 ph10 110 Later: more #ifdefs are needed in pcre_ord2utf8.c and pcre_valid_utf8.c
1375 ph10 111 so as not to refer to the tables, even though these functions will never be
1376     called when UTF-8 support is disabled. Otherwise there are problems with a
1377     shared library.
1378    
1379 ph10 118 10. Fixed two bugs in the emulated memmove() function in pcre_internal.h:
1380    
1381     (a) It was defining its arguments as char * instead of void *.
1382    
1383 ph10 123 (b) It was assuming that all moves were upwards in memory; this was true
1384     a long time ago when I wrote it, but is no longer the case.
1385    
1386 ph10 118 The emulated memove() is provided for those environments that have neither
1387 ph10 123 memmove() nor bcopy(). I didn't think anyone used it these days, but that
1388 ph10 118 is clearly not the case, as these two bugs were recently reported.
1389 ph10 123
1390 ph10 111 11. The script PrepareRelease is now distributed: it calls 132html, CleanTxt,
1391 ph10 123 and Detrail to create the HTML documentation, the .txt form of the man
1392     pages, and it removes trailing spaces from listed files. It also creates
1393     pcre.h.generic and config.h.generic from pcre.h and config.h. In the latter
1394     case, it wraps all the #defines with #ifndefs. This script should be run
1395 ph10 111 before "make dist".
1396 ph10 123
1397 ph10 115 12. Fixed two fairly obscure bugs concerned with quantified caseless matching
1398     with Unicode property support.
1399 ph10 123
1400     (a) For a maximizing quantifier, if the two different cases of the
1401     character were of different lengths in their UTF-8 codings (there are
1402     some cases like this - I found 11), and the matching function had to
1403 ph10 115 back up over a mixture of the two cases, it incorrectly assumed they
1404     were both the same length.
1405 ph10 123
1406     (b) When PCRE was configured to use the heap rather than the stack for
1407     recursion during matching, it was not correctly preserving the data for
1408     the other case of a UTF-8 character when checking ahead for a match
1409     while processing a minimizing repeat. If the check also involved
1410 ph10 115 matching a wide character, but failed, corruption could cause an
1411     erroneous result when trying to check for a repeat of the original
1412     character.
1413 ph10 123
1414 ph10 116 13. Some tidying changes to the testing mechanism:
1415 ph10 98
1416 ph10 116 (a) The RunTest script now detects the internal link size and whether there
1417     is UTF-8 and UCP support by running ./pcretest -C instead of relying on
1418 ph10 123 values substituted by "configure". (The RunGrepTest script already did
1419     this for UTF-8.) The configure.ac script no longer substitutes the
1420     relevant variables.
1421    
1422 ph10 116 (b) The debugging options /B and /D in pcretest show the compiled bytecode
1423     with length and offset values. This means that the output is different
1424     for different internal link sizes. Test 2 is skipped for link sizes
1425     other than 2 because of this, bypassing the problem. Unfortunately,
1426     there was also a test in test 3 (the locale tests) that used /B and
1427 ph10 123 failed for link sizes other than 2. Rather than cut the whole test out,
1428     I have added a new /Z option to pcretest that replaces the length and
1429     offset values with spaces. This is now used to make test 3 independent
1430 ph10 122 of link size. (Test 2 will be tidied up later.)
1431 ph10 123
1432     14. If erroroffset was passed as NULL to pcre_compile, it provoked a
1433 ph10 122 segmentation fault instead of returning the appropriate error message.
1434 ph10 134
1435 ph10 131 15. In multiline mode when the newline sequence was set to "any", the pattern
1436 ph10 134 ^$ would give a match between the \r and \n of a subject such as "A\r\nB".
1437     This doesn't seem right; it now treats the CRLF combination as the line
1438     ending, and so does not match in that case. It's only a pattern such as ^$
1439     that would hit this one: something like ^ABC$ would have failed after \r
1440     and then tried again after \r\n.
1441    
1442 ph10 131 16. Changed the comparison command for RunGrepTest from "diff -u" to "diff -ub"
1443 ph10 134 in an attempt to make files that differ only in their line terminators
1444     compare equal. This works on Linux.
1445 ph10 142
1446 ph10 141 17. Under certain error circumstances pcregrep might try to free random memory
1447     as it exited. This is now fixed, thanks to valgrind.
1448 ph10 142
1449 ph10 141 19. In pcretest, if the pattern /(?m)^$/g<any> was matched against the string
1450 ph10 142 "abc\r\n\r\n", it found an unwanted second match after the second \r. This
1451     was because its rules for how to advance for /g after matching an empty
1452 ph10 143 string at the end of a line did not allow for this case. They now check for
1453     it specially.
1454 ph10 150
1455     20. pcretest is supposed to handle patterns and data of any length, by
1456     extending its buffers when necessary. It was getting this wrong when the
1457 ph10 147 buffer for a data line had to be extended.
1458 ph10 150
1459 ph10 149 21. Added PCRE_NEWLINE_ANYCRLF which is like ANY, but matches only CR, LF, or
1460 ph10 150 CRLF as a newline sequence.
1461 ph10 152
1462 ph10 151 22. Code for handling Unicode properties in pcre_dfa_exec() wasn't being cut
1463 ph10 152 out by #ifdef SUPPORT_UCP. This did no harm, as it could never be used, but
1464     I have nevertheless tidied it up.
1465 ph10 111
1466 ph10 152 23. Added some casts to kill warnings from HP-UX ia64 compiler.
1467 ph10 123
1468 ph10 153 24. Added a man page for pcre-config.
1469 ph10 152
1470 ph10 153
1471 nigel 93 Version 7.0 19-Dec-06
1472     ---------------------
1473    
1474     1. Fixed a signed/unsigned compiler warning in pcre_compile.c, shown up by
1475     moving to gcc 4.1.1.
1476    
1477     2. The -S option for pcretest uses setrlimit(); I had omitted to #include
1478     sys/time.h, which is documented as needed for this function. It doesn't
1479     seem to matter on Linux, but it showed up on some releases of OS X.
1480    
1481     3. It seems that there are systems where bytes whose values are greater than
1482     127 match isprint() in the "C" locale. The "C" locale should be the
1483     default when a C program starts up. In most systems, only ASCII printing
1484     characters match isprint(). This difference caused the output from pcretest
1485     to vary, making some of the tests fail. I have changed pcretest so that:
1486    
1487     (a) When it is outputting text in the compiled version of a pattern, bytes
1488     other than 32-126 are always shown as hex escapes.
1489    
1490     (b) When it is outputting text that is a matched part of a subject string,
1491     it does the same, unless a different locale has been set for the match
1492     (using the /L modifier). In this case, it uses isprint() to decide.
1493    
1494     4. Fixed a major bug that caused incorrect computation of the amount of memory
1495     required for a compiled pattern when options that changed within the
1496     pattern affected the logic of the preliminary scan that determines the
1497     length. The relevant options are -x, and -i in UTF-8 mode. The result was
1498     that the computed length was too small. The symptoms of this bug were
1499     either the PCRE error "internal error: code overflow" from pcre_compile(),
1500     or a glibc crash with a message such as "pcretest: free(): invalid next
1501     size (fast)". Examples of patterns that provoked this bug (shown in
1502     pcretest format) are:
1503    
1504     /(?-x: )/x
1505     /(?x)(?-x: \s*#\s*)/
1506     /((?i)[\x{c0}])/8
1507     /(?i:[\x{c0}])/8
1508    
1509     HOWEVER: Change 17 below makes this fix obsolete as the memory computation
1510     is now done differently.
1511    
1512     5. Applied patches from Google to: (a) add a QuoteMeta function to the C++
1513     wrapper classes; (b) implement a new function in the C++ scanner that is
1514     more efficient than the old way of doing things because it avoids levels of
1515     recursion in the regex matching; (c) add a paragraph to the documentation
1516     for the FullMatch() function.
1517    
1518     6. The escape sequence \n was being treated as whatever was defined as
1519     "newline". Not only was this contrary to the documentation, which states
1520     that \n is character 10 (hex 0A), but it also went horribly wrong when
1521     "newline" was defined as CRLF. This has been fixed.
1522    
1523     7. In pcre_dfa_exec.c the value of an unsigned integer (the variable called c)
1524     was being set to -1 for the "end of line" case (supposedly a value that no
1525     character can have). Though this value is never used (the check for end of
1526     line is "zero bytes in current character"), it caused compiler complaints.
1527     I've changed it to 0xffffffff.
1528    
1529     8. In pcre_version.c, the version string was being built by a sequence of
1530     C macros that, in the event of PCRE_PRERELEASE being defined as an empty
1531     string (as it is for production releases) called a macro with an empty
1532     argument. The C standard says the result of this is undefined. The gcc
1533     compiler treats it as an empty string (which was what was wanted) but it is
1534     reported that Visual C gives an error. The source has been hacked around to
1535     avoid this problem.
1536    
1537     9. On the advice of a Windows user, included <io.h> and <fcntl.h> in Windows
1538     builds of pcretest, and changed the call to _setmode() to use _O_BINARY
1539     instead of 0x8000. Made all the #ifdefs test both _WIN32 and WIN32 (not all
1540     of them did).
1541    
1542     10. Originally, pcretest opened its input and output without "b"; then I was
1543     told that "b" was needed in some environments, so it was added for release
1544     5.0 to both the input and output. (It makes no difference on Unix-like
1545     systems.) Later I was told that it is wrong for the input on Windows. I've
1546     now abstracted the modes into two macros, to make it easier to fiddle with
1547     them, and removed "b" from the input mode under Windows.
1548    
1549     11. Added pkgconfig support for the C++ wrapper library, libpcrecpp.
1550    
1551     12. Added -help and --help to pcretest as an official way of being reminded
1552     of the options.
1553    
1554     13. Removed some redundant semicolons after macro calls in pcrecpparg.h.in
1555     and pcrecpp.cc because they annoy compilers at high warning levels.
1556    
1557     14. A bit of tidying/refactoring in pcre_exec.c in the main bumpalong loop.
1558    
1559     15. Fixed an occurrence of == in configure.ac that should have been = (shell
1560     scripts are not C programs :-) and which was not noticed because it works
1561     on Linux.
1562    
1563     16. pcretest is supposed to handle any length of pattern and data line (as one
1564     line or as a continued sequence of lines) by extending its input buffer if
1565     necessary. This feature was broken for very long pattern lines, leading to
1566     a string of junk being passed to pcre_compile() if the pattern was longer
1567     than about 50K.
1568    
1569     17. I have done a major re-factoring of the way pcre_compile() computes the
1570     amount of memory needed for a compiled pattern. Previously, there was code
1571     that made a preliminary scan of the pattern in order to do this. That was
1572     OK when PCRE was new, but as the facilities have expanded, it has become
1573     harder and harder to keep it in step with the real compile phase, and there
1574     have been a number of bugs (see for example, 4 above). I have now found a
1575     cunning way of running the real compile function in a "fake" mode that
1576     enables it to compute how much memory it would need, while actually only
1577     ever using a few hundred bytes of working memory and without too many
1578     tests of the mode. This should make future maintenance and development
1579     easier. A side effect of this work is that the limit of 200 on the nesting
1580     depth of parentheses has been removed (though this was never a serious
1581     limitation, I suspect). However, there is a downside: pcre_compile() now
1582     runs more slowly than before (30% or more, depending on the pattern). I
1583     hope this isn't a big issue. There is no effect on runtime performance.
1584    
1585     18. Fixed a minor bug in pcretest: if a pattern line was not terminated by a
1586     newline (only possible for the last line of a file) and it was a
1587     pattern that set a locale (followed by /Lsomething), pcretest crashed.
1588    
1589     19. Added additional timing features to pcretest. (1) The -tm option now times
1590     matching only, not compiling. (2) Both -t and -tm can be followed, as a
1591     separate command line item, by a number that specifies the number of
1592     repeats to use when timing. The default is 50000; this gives better
1593     precision, but takes uncomfortably long for very large patterns.
1594    
1595     20. Extended pcre_study() to be more clever in cases where a branch of a
1596     subpattern has no definite first character. For example, (a*|b*)[cd] would
1597     previously give no result from pcre_study(). Now it recognizes that the
1598     first character must be a, b, c, or d.
1599    
1600     21. There was an incorrect error "recursive call could loop indefinitely" if
1601     a subpattern (or the entire pattern) that was being tested for matching an
1602     empty string contained only one non-empty item after a nested subpattern.
1603     For example, the pattern (?>\x{100}*)\d(?R) provoked this error
1604     incorrectly, because the \d was being skipped in the check.
1605    
1606     22. The pcretest program now has a new pattern option /B and a command line
1607     option -b, which is equivalent to adding /B to every pattern. This causes
1608     it to show the compiled bytecode, without the additional information that
1609     -d shows. The effect of -d is now the same as -b with -i (and similarly, /D
1610     is the same as /B/I).
1611    
1612     23. A new optimization is now able automatically to treat some sequences such
1613     as a*b as a*+b. More specifically, if something simple (such as a character
1614     or a simple class like \d) has an unlimited quantifier, and is followed by
1615     something that cannot possibly match the quantified thing, the quantifier
1616     is automatically "possessified".
1617    
1618     24. A recursive reference to a subpattern whose number was greater than 39
1619     went wrong under certain circumstances in UTF-8 mode. This bug could also
1620     have affected the operation of pcre_study().
1621    
1622     25. Realized that a little bit of performance could be had by replacing
1623     (c & 0xc0) == 0xc0 with c >= 0xc0 when processing UTF-8 characters.
1624    
1625     26. Timing data from pcretest is now shown to 4 decimal places instead of 3.
1626    
1627     27. Possessive quantifiers such as a++ were previously implemented by turning
1628     them into atomic groups such as ($>a+). Now they have their own opcodes,
1629     which improves performance. This includes the automatically created ones
1630     from 23 above.
1631    
1632     28. A pattern such as (?=(\w+))\1: which simulates an atomic group using a
1633     lookahead was broken if it was not anchored. PCRE was mistakenly expecting
1634     the first matched character to be a colon. This applied both to named and
1635     numbered groups.
1636    
1637     29. The ucpinternal.h header file was missing its idempotency #ifdef.
1638    
1639     30. I was sent a "project" file called libpcre.a.dev which I understand makes
1640     building PCRE on Windows easier, so I have included it in the distribution.
1641    
1642     31. There is now a check in pcretest against a ridiculously large number being
1643     returned by pcre_exec() or pcre_dfa_exec(). If this happens in a /g or /G
1644     loop, the loop is abandoned.
1645    
1646     32. Forward references to subpatterns in conditions such as (?(2)...) where
1647     subpattern 2 is defined later cause pcre_compile() to search forwards in
1648     the pattern for the relevant set of parentheses. This search went wrong
1649     when there were unescaped parentheses in a character class, parentheses
1650     escaped with \Q...\E, or parentheses in a #-comment in /x mode.
1651    
1652     33. "Subroutine" calls and backreferences were previously restricted to
1653     referencing subpatterns earlier in the regex. This restriction has now
1654     been removed.
1655    
1656     34. Added a number of extra features that are going to be in Perl 5.10. On the
1657     whole, these are just syntactic alternatives for features that PCRE had
1658     previously implemented using the Python syntax or my own invention. The
1659     other formats are all retained for compatibility.
1660    
1661     (a) Named groups can now be defined as (?<name>...) or (?'name'...) as well
1662     as (?P<name>...). The new forms, as well as being in Perl 5.10, are
1663     also .NET compatible.
1664    
1665     (b) A recursion or subroutine call to a named group can now be defined as
1666     (?&name) as well as (?P>name).
1667    
1668     (c) A backreference to a named group can now be defined as \k<name> or
1669     \k'name' as well as (?P=name). The new forms, as well as being in Perl
1670     5.10, are also .NET compatible.
1671    
1672     (d) A conditional reference to a named group can now use the syntax
1673     (?(<name>) or (?('name') as well as (?(name).
1674    
1675     (e) A "conditional group" of the form (?(DEFINE)...) can be used to define
1676     groups (named and numbered) that are never evaluated inline, but can be
1677     called as "subroutines" from elsewhere. In effect, the DEFINE condition
1678     is always false. There may be only one alternative in such a group.
1679    
1680     (f) A test for recursion can be given as (?(R1).. or (?(R&name)... as well
1681     as the simple (?(R). The condition is true only if the most recent
1682     recursion is that of the given number or name. It does not search out
1683     through the entire recursion stack.
1684    
1685     (g) The escape \gN or \g{N} has been added, where N is a positive or
1686     negative number, specifying an absolute or relative reference.
1687    
1688     35. Tidied to get rid of some further signed/unsigned compiler warnings and
1689     some "unreachable code" warnings.
1690    
1691     36. Updated the Unicode property tables to Unicode version 5.0.0. Amongst other
1692     things, this adds five new scripts.
1693    
1694     37. Perl ignores orphaned \E escapes completely. PCRE now does the same.
1695     There were also incompatibilities regarding the handling of \Q..\E inside
1696     character classes, for example with patterns like [\Qa\E-\Qz\E] where the
1697     hyphen was adjacent to \Q or \E. I hope I've cleared all this up now.
1698    
1699     38. Like Perl, PCRE detects when an indefinitely repeated parenthesized group
1700     matches an empty string, and forcibly breaks the loop. There were bugs in
1701     this code in non-simple cases. For a pattern such as ^(a()*)* matched
1702     against aaaa the result was just "a" rather than "aaaa", for example. Two
1703     separate and independent bugs (that affected different cases) have been
1704     fixed.
1705    
1706     39. Refactored the code to abolish the use of different opcodes for small
1707     capturing bracket numbers. This is a tidy that I avoided doing when I
1708     removed the limit on the number of capturing brackets for 3.5 back in 2001.
1709     The new approach is not only tidier, it makes it possible to reduce the
1710     memory needed to fix the previous bug (38).
1711    
1712     40. Implemented PCRE_NEWLINE_ANY to recognize any of the Unicode newline
1713     sequences (http://unicode.org/unicode/reports/tr18/) as "newline" when
1714     processing dot, circumflex, or dollar metacharacters, or #-comments in /x
1715     mode.
1716    
1717     41. Add \R to match any Unicode newline sequence, as suggested in the Unicode
1718     report.
1719    
1720     42. Applied patch, originally from Ari Pollak, modified by Google, to allow
1721     copy construction and assignment in the C++ wrapper.
1722    
1723     43. Updated pcregrep to support "--newline=any". In the process, I fixed a
1724     couple of bugs that could have given wrong results in the "--newline=crlf"
1725     case.
1726    
1727     44. Added a number of casts and did some reorganization of signed/unsigned int
1728     variables following suggestions from Dair Grant. Also renamed the variable
1729     "this" as "item" because it is a C++ keyword.
1730    
1731     45. Arranged for dftables to add
1732    
1733     #include "pcre_internal.h"
1734    
1735     to pcre_chartables.c because without it, gcc 4.x may remove the array
1736     definition from the final binary if PCRE is built into a static library and
1737     dead code stripping is activated.
1738    
1739     46. For an unanchored pattern, if a match attempt fails at the start of a
1740     newline sequence, and the newline setting is CRLF or ANY, and the next two
1741     characters are CRLF, advance by two characters instead of one.
1742    
1743    
1744 nigel 91 Version 6.7 04-Jul-06
1745     ---------------------
1746    
1747     1. In order to handle tests when input lines are enormously long, pcretest has
1748     been re-factored so that it automatically extends its buffers when
1749     necessary. The code is crude, but this _is_ just a test program. The
1750     default size has been increased from 32K to 50K.
1751    
1752     2. The code in pcre_study() was using the value of the re argument before
1753     testing it for NULL. (Of course, in any sensible call of the function, it
1754     won't be NULL.)
1755    
1756     3. The memmove() emulation function in pcre_internal.h, which is used on
1757     systems that lack both memmove() and bcopy() - that is, hardly ever -
1758     was missing a "static" storage class specifier.
1759    
1760     4. When UTF-8 mode was not set, PCRE looped when compiling certain patterns
1761     containing an extended class (one that cannot be represented by a bitmap
1762     because it contains high-valued characters or Unicode property items, e.g.
1763     [\pZ]). Almost always one would set UTF-8 mode when processing such a
1764     pattern, but PCRE should not loop if you do not (it no longer does).
1765     [Detail: two cases were found: (a) a repeated subpattern containing an
1766     extended class; (b) a recursive reference to a subpattern that followed a
1767     previous extended class. It wasn't skipping over the extended class
1768     correctly when UTF-8 mode was not set.]
1769    
1770     5. A negated single-character class was not being recognized as fixed-length
1771     in lookbehind assertions such as (?<=[^f]), leading to an incorrect
1772     compile error "lookbehind assertion is not fixed length".
1773    
1774     6. The RunPerlTest auxiliary script was showing an unexpected difference
1775     between PCRE and Perl for UTF-8 tests. It turns out that it is hard to
1776     write a Perl script that can interpret lines of an input file either as
1777     byte characters or as UTF-8, which is what "perltest" was being required to
1778     do for the non-UTF-8 and UTF-8 tests, respectively. Essentially what you
1779     can't do is switch easily at run time between having the "use utf8;" pragma
1780     or not. In the end, I fudged it by using the RunPerlTest script to insert
1781     "use utf8;" explicitly for the UTF-8 tests.
1782    
1783     7. In multiline (/m) mode, PCRE was matching ^ after a terminating newline at
1784     the end of the subject string, contrary to the documentation and to what
1785     Perl does. This was true of both matching functions. Now it matches only at
1786     the start of the subject and immediately after *internal* newlines.
1787    
1788     8. A call of pcre_fullinfo() from pcretest to get the option bits was passing
1789     a pointer to an int instead of a pointer to an unsigned long int. This
1790     caused problems on 64-bit systems.
1791    
1792     9. Applied a patch from the folks at Google to pcrecpp.cc, to fix "another
1793     instance of the 'standard' template library not being so standard".
1794    
1795     10. There was no check on the number of named subpatterns nor the maximum
1796     length of a subpattern name. The product of these values is used to compute
1797     the size of the memory block for a compiled pattern. By supplying a very
1798     long subpattern name and a large number of named subpatterns, the size
1799     computation could be caused to overflow. This is now prevented by limiting
1800     the length of names to 32 characters, and the number of named subpatterns
1801     to 10,000.
1802    
1803     11. Subpatterns that are repeated with specific counts have to be replicated in
1804     the compiled pattern. The size of memory for this was computed from the
1805     length of the subpattern and the repeat count. The latter is limited to
1806     65535, but there was no limit on the former, meaning that integer overflow
1807     could in principle occur. The compiled length of a repeated subpattern is
1808     now limited to 30,000 bytes in order to prevent this.
1809    
1810     12. Added the optional facility to have named substrings with the same name.
1811    
1812     13. Added the ability to use a named substring as a condition, using the
1813     Python syntax: (?(name)yes|no). This overloads (?(R)... and names that
1814     are numbers (not recommended). Forward references are permitted.
1815    
1816     14. Added forward references in named backreferences (if you see what I mean).
1817    
1818     15. In UTF-8 mode, with the PCRE_DOTALL option set, a quantified dot in the
1819     pattern could run off the end of the subject. For example, the pattern
1820     "(?s)(.{1,5})"8 did this with the subject "ab".
1821    
1822     16. If PCRE_DOTALL or PCRE_MULTILINE were set, pcre_dfa_exec() behaved as if
1823     PCRE_CASELESS was set when matching characters that were quantified with ?
1824     or *.
1825    
1826     17. A character class other than a single negated character that had a minimum
1827     but no maximum quantifier - for example [ab]{6,} - was not handled
1828     correctly by pce_dfa_exec(). It would match only one character.
1829    
1830     18. A valid (though odd) pattern that looked like a POSIX character
1831     class but used an invalid character after [ (for example [[,abc,]]) caused
1832     pcre_compile() to give the error "Failed: internal error: code overflow" or
1833     in some cases to crash with a glibc free() error. This could even happen if
1834     the pattern terminated after [[ but there just happened to be a sequence of
1835     letters, a binary zero, and a closing ] in the memory that followed.
1836    
1837     19. Perl's treatment of octal escapes in the range \400 to \777 has changed
1838     over the years. Originally (before any Unicode support), just the bottom 8
1839     bits were taken. Thus, for example, \500 really meant \100. Nowadays the
1840     output from "man perlunicode" includes this:
1841    
1842     The regular expression compiler produces polymorphic opcodes. That
1843     is, the pattern adapts to the data and automatically switches to
1844     the Unicode character scheme when presented with Unicode data--or
1845     instead uses a traditional byte scheme when presented with byte
1846     data.
1847    
1848     Sadly, a wide octal escape does not cause a switch, and in a string with
1849     no other multibyte characters, these octal escapes are treated as before.
1850     Thus, in Perl, the pattern /\500/ actually matches \100 but the pattern
1851     /\500|\x{1ff}/ matches \500 or \777 because the whole thing is treated as a
1852     Unicode string.
1853    
1854     I have not perpetrated such confusion in PCRE. Up till now, it took just
1855     the bottom 8 bits, as in old Perl. I have now made octal escapes with
1856     values greater than \377 illegal in non-UTF-8 mode. In UTF-8 mode they
1857     translate to the appropriate multibyte character.
1858    
1859     29. Applied some refactoring to reduce the number of warnings from Microsoft
1860     and Borland compilers. This has included removing the fudge introduced
1861     seven years ago for the OS/2 compiler (see 2.02/2 below) because it caused
1862     a warning about an unused variable.
1863    
1864     21. PCRE has not included VT (character 0x0b) in the set of whitespace
1865     characters since release 4.0, because Perl (from release 5.004) does not.
1866     [Or at least, is documented not to: some releases seem to be in conflict
1867     with the documentation.] However, when a pattern was studied with
1868     pcre_study() and all its branches started with \s, PCRE still included VT
1869     as a possible starting character. Of course, this did no harm; it just
1870     caused an unnecessary match attempt.
1871    
1872     22. Removed a now-redundant internal flag bit that recorded the fact that case
1873     dependency changed within the pattern. This was once needed for "required
1874     byte" processing, but is no longer used. This recovers a now-scarce options
1875     bit. Also moved the least significant internal flag bit to the most-
1876     significant bit of the word, which was not previously used (hangover from
1877     the days when it was an int rather than a uint) to free up another bit for
1878     the future.
1879    
1880     23. Added support for CRLF line endings as well as CR and LF. As well as the
1881     default being selectable at build time, it can now be changed at runtime
1882     via the PCRE_NEWLINE_xxx flags. There are now options for pcregrep to
1883     specify that it is scanning data with non-default line endings.
1884    
1885     24. Changed the definition of CXXLINK to make it agree with the definition of
1886     LINK in the Makefile, by replacing LDFLAGS to CXXFLAGS.
1887    
1888     25. Applied Ian Taylor's patches to avoid using another stack frame for tail
1889     recursions. This makes a big different to stack usage for some patterns.
1890    
1891     26. If a subpattern containing a named recursion or subroutine reference such
1892     as (?P>B) was quantified, for example (xxx(?P>B)){3}, the calculation of
1893     the space required for the compiled pattern went wrong and gave too small a
1894     value. Depending on the environment, this could lead to "Failed: internal
1895     error: code overflow at offset 49" or "glibc detected double free or
1896     corruption" errors.
1897    
1898     27. Applied patches from Google (a) to support the new newline modes and (b) to
1899     advance over multibyte UTF-8 characters in GlobalReplace.
1900    
1901     28. Change free() to pcre_free() in pcredemo.c. Apparently this makes a
1902     difference for some implementation of PCRE in some Windows version.
1903    
1904     29. Added some extra testing facilities to pcretest:
1905    
1906     \q<number> in a data line sets the "match limit" value
1907     \Q<number> in a data line sets the "match recursion limt" value
1908     -S <number> sets the stack size, where <number> is in megabytes
1909    
1910     The -S option isn't available for Windows.
1911    
1912    
1913 nigel 89 Version 6.6 06-Feb-06
1914     ---------------------
1915    
1916     1. Change 16(a) for 6.5 broke things, because PCRE_DATA_SCOPE was not defined
1917     in pcreposix.h. I have copied the definition from pcre.h.
1918    
1919     2. Change 25 for 6.5 broke compilation in a build directory out-of-tree
1920     because pcre.h is no longer a built file.
1921    
1922     3. Added Jeff Friedl's additional debugging patches to pcregrep. These are
1923     not normally included in the compiled code.
1924    
1925    
1926 nigel 87 Version 6.5 01-Feb-06
1927     ---------------------
1928    
1929     1. When using the partial match feature with pcre_dfa_exec(), it was not
1930     anchoring the second and subsequent partial matches at the new starting
1931     point. This could lead to incorrect results. For example, with the pattern
1932     /1234/, partially matching against "123" and then "a4" gave a match.
1933    
1934     2. Changes to pcregrep:
1935    
1936     (a) All non-match returns from pcre_exec() were being treated as failures
1937     to match the line. Now, unless the error is PCRE_ERROR_NOMATCH, an
1938     error message is output. Some extra information is given for the
1939     PCRE_ERROR_MATCHLIMIT and PCRE_ERROR_RECURSIONLIMIT errors, which are
1940     probably the only errors that are likely to be caused by users (by
1941     specifying a regex that has nested indefinite repeats, for instance).
1942     If there are more than 20 of these errors, pcregrep is abandoned.
1943    
1944     (b) A binary zero was treated as data while matching, but terminated the
1945     output line if it was written out. This has been fixed: binary zeroes
1946     are now no different to any other data bytes.
1947    
1948     (c) Whichever of the LC_ALL or LC_CTYPE environment variables is set is
1949     used to set a locale for matching. The --locale=xxxx long option has
1950     been added (no short equivalent) to specify a locale explicitly on the
1951     pcregrep command, overriding the environment variables.
1952    
1953     (d) When -B was used with -n, some line numbers in the output were one less
1954     than they should have been.
1955    
1956     (e) Added the -o (--only-matching) option.
1957    
1958     (f) If -A or -C was used with -c (count only), some lines of context were
1959     accidentally printed for the final match.
1960    
1961     (g) Added the -H (--with-filename) option.
1962    
1963     (h) The combination of options -rh failed to suppress file names for files
1964     that were found from directory arguments.
1965    
1966     (i) Added the -D (--devices) and -d (--directories) options.
1967    
1968     (j) Added the -F (--fixed-strings) option.
1969    
1970     (k) Allow "-" to be used as a file name for -f as well as for a data file.
1971    
1972     (l) Added the --colo(u)r option.
1973    
1974     (m) Added Jeffrey Friedl's -S testing option, but within #ifdefs so that it
1975     is not present by default.
1976    
1977     3. A nasty bug was discovered in the handling of recursive patterns, that is,
1978     items such as (?R) or (?1), when the recursion could match a number of
1979     alternatives. If it matched one of the alternatives, but subsequently,
1980     outside the recursion, there was a failure, the code tried to back up into
1981     the recursion. However, because of the way PCRE is implemented, this is not
1982     possible, and the result was an incorrect result from the match.
1983    
1984     In order to prevent this happening, the specification of recursion has
1985     been changed so that all such subpatterns are automatically treated as
1986     atomic groups. Thus, for example, (?R) is treated as if it were (?>(?R)).
1987    
1988     4. I had overlooked the fact that, in some locales, there are characters for
1989     which isalpha() is true but neither isupper() nor islower() are true. In
1990     the fr_FR locale, for instance, the \xAA and \xBA characters (ordmasculine
1991     and ordfeminine) are like this. This affected the treatment of \w and \W
1992     when they appeared in character classes, but not when they appeared outside
1993     a character class. The bit map for "word" characters is now created
1994     separately from the results of isalnum() instead of just taking it from the
1995     upper, lower, and digit maps. (Plus the underscore character, of course.)
1996    
1997     5. The above bug also affected the handling of POSIX character classes such as
1998     [[:alpha:]] and [[:alnum:]]. These do not have their own bit maps in PCRE's
1999     permanent tables. Instead, the bit maps for such a class were previously
2000     created as the appropriate unions of the upper, lower, and digit bitmaps.
2001     Now they are created by subtraction from the [[:word:]] class, which has
2002     its own bitmap.
2003    
2004     6. The [[:blank:]] character class matches horizontal, but not vertical space.
2005     It is created by subtracting the vertical space characters (\x09, \x0a,
2006     \x0b, \x0c) from the [[:space:]] bitmap. Previously, however, the
2007     subtraction was done in the overall bitmap for a character class, meaning
2008     that a class such as [\x0c[:blank:]] was incorrect because \x0c would not
2009     be recognized. This bug has been fixed.
2010    
2011     7. Patches from the folks at Google:
2012    
2013     (a) pcrecpp.cc: "to handle a corner case that may or may not happen in
2014     real life, but is still worth protecting against".
2015    
2016     (b) pcrecpp.cc: "corrects a bug when negative radixes are used with
2017     regular expressions".
2018    
2019     (c) pcre_scanner.cc: avoid use of std::count() because not all systems
2020     have it.
2021    
2022     (d) Split off pcrecpparg.h from pcrecpp.h and had the former built by
2023     "configure" and the latter not, in order to fix a problem somebody had
2024     with compiling the Arg class on HP-UX.
2025    
2026     (e) Improve the error-handling of the C++ wrapper a little bit.
2027    
2028     (f) New tests for checking recursion limiting.
2029    
2030     8. The pcre_memmove() function, which is used only if the environment does not
2031     have a standard memmove() function (and is therefore rarely compiled),
2032     contained two bugs: (a) use of int instead of size_t, and (b) it was not
2033     returning a result (though PCRE never actually uses the result).
2034    
2035     9. In the POSIX regexec() interface, if nmatch is specified as a ridiculously
2036     large number - greater than INT_MAX/(3*sizeof(int)) - REG_ESPACE is
2037     returned instead of calling malloc() with an overflowing number that would
2038     most likely cause subsequent chaos.
2039    
2040     10. The debugging option of pcretest was not showing the NO_AUTO_CAPTURE flag.
2041    
2042     11. The POSIX flag REG_NOSUB is now supported. When a pattern that was compiled
2043     with this option is matched, the nmatch and pmatch options of regexec() are
2044     ignored.
2045    
2046     12. Added REG_UTF8 to the POSIX interface. This is not defined by POSIX, but is
2047     provided in case anyone wants to the the POSIX interface with UTF-8
2048     strings.
2049    
2050     13. Added CXXLDFLAGS to the Makefile parameters to provide settings only on the
2051     C++ linking (needed for some HP-UX environments).
2052    
2053     14. Avoid compiler warnings in get_ucpname() when compiled without UCP support
2054     (unused parameter) and in the pcre_printint() function (omitted "default"
2055     switch label when the default is to do nothing).
2056    
2057     15. Added some code to make it possible, when PCRE is compiled as a C++
2058     library, to replace subject pointers for pcre_exec() with a smart pointer
2059     class, thus making it possible to process discontinuous strings.
2060    
2061     16. The two macros PCRE_EXPORT and PCRE_DATA_SCOPE are confusing, and perform
2062     much the same function. They were added by different people who were trying
2063     to make PCRE easy to compile on non-Unix systems. It has been suggested
2064     that PCRE_EXPORT be abolished now that there is more automatic apparatus
2065     for compiling on Windows systems. I have therefore replaced it with
2066     PCRE_DATA_SCOPE. This is set automatically for Windows; if not set it
2067     defaults to "extern" for C or "extern C" for C++, which works fine on
2068     Unix-like systems. It is now possible to override the value of PCRE_DATA_
2069     SCOPE with something explicit in config.h. In addition:
2070    
2071     (a) pcreposix.h still had just "extern" instead of either of these macros;
2072     I have replaced it with PCRE_DATA_SCOPE.
2073    
2074     (b) Functions such as _pcre_xclass(), which are internal to the library,
2075     but external in the C sense, all had PCRE_EXPORT in their definitions.
2076     This is apparently wrong for the Windows case, so I have removed it.
2077     (It makes no difference on Unix-like systems.)
2078    
2079     17. Added a new limit, MATCH_LIMIT_RECURSION, which limits the depth of nesting
2080     of recursive calls to match(). This is different to MATCH_LIMIT because
2081     that limits the total number of calls to match(), not all of which increase
2082     the depth of recursion. Limiting the recursion depth limits the amount of
2083     stack (or heap if NO_RECURSE is set) that is used. The default can be set
2084     when PCRE is compiled, and changed at run time. A patch from Google adds
2085     this functionality to the C++ interface.
2086    
2087     18. Changes to the handling of Unicode character properties:
2088    
2089     (a) Updated the table to Unicode 4.1.0.
2090    
2091     (b) Recognize characters that are not in the table as "Cn" (undefined).
2092    
2093     (c) I revised the way the table is implemented to a much improved format
2094     which includes recognition of ranges. It now supports the ranges that
2095     are defined in UnicodeData.txt, and it also amalgamates other
2096     characters into ranges. This has reduced the number of entries in the
2097     table from around 16,000 to around 3,000, thus reducing its size
2098     considerably. I realized I did not need to use a tree structure after
2099     all - a binary chop search is just as efficient. Having reduced the
2100     number of entries, I extended their size from 6 bytes to 8 bytes to
2101     allow for more data.
2102    
2103     (d) Added support for Unicode script names via properties such as \p{Han}.
2104    
2105     19. In UTF-8 mode, a backslash followed by a non-Ascii character was not
2106     matching that character.
2107    
2108     20. When matching a repeated Unicode property with a minimum greater than zero,
2109     (for example \pL{2,}), PCRE could look past the end of the subject if it
2110     reached it while seeking the minimum number of characters. This could
2111     happen only if some of the characters were more than one byte long, because
2112     there is a check for at least the minimum number of bytes.
2113    
2114     21. Refactored the implementation of \p and \P so as to be more general, to
2115     allow for more different types of property in future. This has changed the
2116     compiled form incompatibly. Anybody with saved compiled patterns that use
2117     \p or \P will have to recompile them.
2118    
2119     22. Added "Any" and "L&" to the supported property types.
2120    
2121     23. Recognize \x{...} as a code point specifier, even when not in UTF-8 mode,
2122     but give a compile time error if the value is greater than 0xff.
2123    
2124     24. The man pages for pcrepartial, pcreprecompile, and pcre_compile2 were
2125     accidentally not being installed or uninstalled.
2126    
2127     25. The pcre.h file was built from pcre.h.in, but the only changes that were
2128     made were to insert the current release number. This seemed silly, because
2129     it made things harder for people building PCRE on systems that don't run
2130     "configure". I have turned pcre.h into a distributed file, no longer built
2131     by "configure", with the version identification directly included. There is
2132     no longer a pcre.h.in file.
2133    
2134     However, this change necessitated a change to the pcre-config script as
2135     well. It is built from pcre-config.in, and one of the substitutions was the
2136     release number. I have updated configure.ac so that ./configure now finds
2137     the release number by grepping pcre.h.
2138    
2139     26. Added the ability to run the tests under valgrind.
2140    
2141    
2142 nigel 85 Version 6.4 05-Sep-05
2143     ---------------------
2144    
2145     1. Change 6.0/10/(l) to pcregrep introduced a bug that caused separator lines
2146     "--" to be printed when multiple files were scanned, even when none of the
2147     -A, -B, or -C options were used. This is not compatible with Gnu grep, so I
2148     consider it to be a bug, and have restored the previous behaviour.
2149    
2150     2. A couple of code tidies to get rid of compiler warnings.
2151    
2152     3. The pcretest program used to cheat by referring to symbols in the library
2153     whose names begin with _pcre_. These are internal symbols that are not
2154     really supposed to be visible externally, and in some environments it is
2155     possible to suppress them. The cheating is now confined to including
2156     certain files from the library's source, which is a bit cleaner.
2157    
2158     4. Renamed pcre.in as pcre.h.in to go with pcrecpp.h.in; it also makes the
2159     file's purpose clearer.
2160    
2161     5. Reorganized pcre_ucp_findchar().
2162    
2163    
2164 nigel 83 Version 6.3 15-Aug-05
2165     ---------------------
2166    
2167     1. The file libpcre.pc.in did not have general read permission in the tarball.
2168    
2169     2. There were some problems when building without C++ support:
2170    
2171     (a) If C++ support was not built, "make install" and "make test" still
2172     tried to test it.
2173    
2174     (b) There were problems when the value of CXX was explicitly set. Some
2175     changes have been made to try to fix these, and ...
2176    
2177     (c) --disable-cpp can now be used to explicitly disable C++ support.
2178    
2179     (d) The use of @CPP_OBJ@ directly caused a blank line preceded by a
2180     backslash in a target when C++ was disabled. This confuses some
2181     versions of "make", apparently. Using an intermediate variable solves
2182     this. (Same for CPP_LOBJ.)
2183    
2184     3. $(LINK_FOR_BUILD) now includes $(CFLAGS_FOR_BUILD) and $(LINK)
2185     (non-Windows) now includes $(CFLAGS) because these flags are sometimes
2186     necessary on certain architectures.
2187    
2188     4. Added a setting of -export-symbols-regex to the link command to remove
2189     those symbols that are exported in the C sense, but actually are local
2190     within the library, and not documented. Their names all begin with
2191     "_pcre_". This is not a perfect job, because (a) we have to except some
2192     symbols that pcretest ("illegally") uses, and (b) the facility isn't always
2193     available (and never for static libraries). I have made a note to try to
2194     find a way round (a) in the future.
2195    
2196    
2197 nigel 81 Version 6.2 01-Aug-05
2198     ---------------------
2199    
2200     1. There was no test for integer overflow of quantifier values. A construction
2201     such as {1111111111111111} would give undefined results. What is worse, if
2202     a minimum quantifier for a parenthesized subpattern overflowed and became
2203     negative, the calculation of the memory size went wrong. This could have
2204     led to memory overwriting.
2205    
2206     2. Building PCRE using VPATH was broken. Hopefully it is now fixed.
2207    
2208     3. Added "b" to the 2nd argument of fopen() in dftables.c, for non-Unix-like
2209     operating environments where this matters.
2210    
2211     4. Applied Giuseppe Maxia's patch to add additional features for controlling
2212     PCRE options from within the C++ wrapper.
2213    
2214     5. Named capturing subpatterns were not being correctly counted when a pattern
2215     was compiled. This caused two problems: (a) If there were more than 100
2216     such subpatterns, the calculation of the memory needed for the whole
2217     compiled pattern went wrong, leading to an overflow error. (b) Numerical
2218     back references of the form \12, where the number was greater than 9, were
2219     not recognized as back references, even though there were sufficient
2220     previous subpatterns.
2221    
2222     6. Two minor patches to pcrecpp.cc in order to allow it to compile on older
2223     versions of gcc, e.g. 2.95.4.
2224    
2225    
2226 nigel 79 Version 6.1 21-Jun-05
2227     ---------------------
2228    
2229     1. There was one reference to the variable "posix" in pcretest.c that was not
2230     surrounded by "#if !defined NOPOSIX".
2231    
2232     2. Make it possible to compile pcretest without DFA support, UTF8 support, or
2233     the cross-check on the old pcre_info() function, for the benefit of the
2234     cut-down version of PCRE that is currently imported into Exim.
2235    
2236     3. A (silly) pattern starting with (?i)(?-i) caused an internal space
2237     allocation error. I've done the easy fix, which wastes 2 bytes for sensible
2238     patterns that start (?i) but I don't think that matters. The use of (?i) is
2239     just an example; this all applies to the other options as well.
2240    
2241     4. Since libtool seems to echo the compile commands it is issuing, the output
2242     from "make" can be reduced a bit by putting "@" in front of each libtool
2243     compile command.
2244    
2245     5. Patch from the folks at Google for configure.in to be a bit more thorough
2246     in checking for a suitable C++ installation before trying to compile the
2247     C++ stuff. This should fix a reported problem when a compiler was present,
2248     but no suitable headers.
2249    
2250     6. The man pages all had just "PCRE" as their title. I have changed them to
2251     be the relevant file name. I have also arranged that these names are
2252     retained in the file doc/pcre.txt, which is a concatenation in text format
2253     of all the man pages except the little individual ones for each function.
2254    
2255     7. The NON-UNIX-USE file had not been updated for the different set of source
2256     files that come with release 6. I also added a few comments about the C++
2257     wrapper.
2258    
2259    
2260 nigel 77 Version 6.0 07-Jun-05
2261     ---------------------
2262    
2263     1. Some minor internal re-organization to help with my DFA experiments.
2264    
2265     2. Some missing #ifdef SUPPORT_UCP conditionals in pcretest and printint that
2266     didn't matter for the library itself when fully configured, but did matter
2267     when compiling without UCP support, or within Exim, where the ucp files are
2268     not imported.
2269    
2270     3. Refactoring of the library code to split up the various functions into
2271     different source modules. The addition of the new DFA matching code (see
2272     below) to a single monolithic source would have made it really too
2273     unwieldy, quite apart from causing all the code to be include in a
2274     statically linked application, when only some functions are used. This is
2275     relevant even without the DFA addition now that patterns can be compiled in
2276     one application and matched in another.
2277    
2278     The downside of splitting up is that there have to be some external
2279     functions and data tables that are used internally in different modules of
2280     the library but which are not part of the API. These have all had their
2281     names changed to start with "_pcre_" so that they are unlikely to clash
2282     with other external names.
2283    
2284     4. Added an alternate matching function, pcre_dfa_exec(), which matches using
2285     a different (DFA) algorithm. Although it is slower than the original
2286     function, it does have some advantages for certain types of matching
2287     problem.
2288    
2289     5. Upgrades to pcretest in order to test the features of pcre_dfa_exec(),
2290     including restarting after a partial match.
2291    
2292     6. A patch for pcregrep that defines INVALID_FILE_ATTRIBUTES if it is not
2293     defined when compiling for Windows was sent to me. I have put it into the
2294     code, though I have no means of testing or verifying it.
2295    
2296     7. Added the pcre_refcount() auxiliary function.
2297    
2298     8. Added the PCRE_FIRSTLINE option. This constrains an unanchored pattern to
2299     match before or at the first newline in the subject string. In pcretest,
2300     the /f option on a pattern can be used to set this.
2301    
2302     9. A repeated \w when used in UTF-8 mode with characters greater than 256
2303     would behave wrongly. This has been present in PCRE since release 4.0.
2304    
2305     10. A number of changes to the pcregrep command:
2306    
2307     (a) Refactored how -x works; insert ^(...)$ instead of setting
2308     PCRE_ANCHORED and checking the length, in preparation for adding
2309     something similar for -w.
2310    
2311     (b) Added the -w (match as a word) option.
2312    
2313     (c) Refactored the way lines are read and buffered so as to have more
2314     than one at a time available.
2315    
2316     (d) Implemented a pcregrep test script.
2317    
2318     (e) Added the -M (multiline match) option. This allows patterns to match
2319     over several lines of the subject. The buffering ensures that at least
2320     8K, or the rest of the document (whichever is the shorter) is available
2321     for matching (and similarly the previous 8K for lookbehind assertions).
2322    
2323     (f) Changed the --help output so that it now says
2324    
2325     -w, --word-regex(p)
2326    
2327     instead of two lines, one with "regex" and the other with "regexp"
2328     because that confused at least one person since the short forms are the
2329     same. (This required a bit of code, as the output is generated
2330     automatically from a table. It wasn't just a text change.)
2331    
2332     (g) -- can be used to terminate pcregrep options if the next thing isn't an
2333     option but starts with a hyphen. Could be a pattern or a path name
2334     starting with a hyphen, for instance.
2335    
2336     (h) "-" can be given as a file name to represent stdin.
2337    
2338     (i) When file names are being printed, "(standard input)" is used for
2339     the standard input, for compatibility with GNU grep. Previously
2340     "<stdin>" was used.
2341    
2342     (j) The option --label=xxx can be used to supply a name to be used for
2343     stdin when file names are being printed. There is no short form.
2344    
2345     (k) Re-factored the options decoding logic because we are going to add
2346     two more options that take data. Such options can now be given in four
2347     different ways, e.g. "-fname", "-f name", "--file=name", "--file name".
2348    
2349     (l) Added the -A, -B, and -C options for requesting that lines of context
2350     around matches be printed.
2351    
2352     (m) Added the -L option to print the names of files that do not contain
2353     any matching lines, that is, the complement of -l.
2354    
2355     (n) The return code is 2 if any file cannot be opened, but pcregrep does
2356     continue to scan other files.
2357    
2358     (o) The -s option was incorrectly implemented. For compatibility with other
2359     greps, it now suppresses the error message for a non-existent or non-
2360     accessible file (but not the return code). There is a new option called
2361     -q that suppresses the output of matching lines, which was what -s was
2362     previously doing.
2363    
2364     (p) Added --include and --exclude options to specify files for inclusion
2365     and exclusion when recursing.
2366    
2367     11. The Makefile was not using the Autoconf-supported LDFLAGS macro properly.
2368     Hopefully, it now does.
2369    
2370     12. Missing cast in pcre_study().
2371    
2372     13. Added an "uninstall" target to the makefile.
2373    
2374     14. Replaced "extern" in the function prototypes in Makefile.in with
2375     "PCRE_DATA_SCOPE", which defaults to 'extern' or 'extern "C"' in the Unix
2376     world, but is set differently for Windows.
2377    
2378     15. Added a second compiling function called pcre_compile2(). The only
2379     difference is that it has an extra argument, which is a pointer to an
2380     integer error code. When there is a compile-time failure, this is set
2381     non-zero, in addition to the error test pointer being set to point to an
2382     error message. The new argument may be NULL if no error number is required
2383     (but then you may as well call pcre_compile(), which is now just a
2384     wrapper). This facility is provided because some applications need a
2385     numeric error indication, but it has also enabled me to tidy up the way
2386     compile-time errors are handled in the POSIX wrapper.
2387    
2388     16. Added VPATH=.libs to the makefile; this should help when building with one
2389     prefix path and installing with another. (Or so I'm told by someone who
2390     knows more about this stuff than I do.)
2391    
2392     17. Added a new option, REG_DOTALL, to the POSIX function regcomp(). This
2393     passes PCRE_DOTALL to the pcre_compile() function, making the "." character
2394     match everything, including newlines. This is not POSIX-compatible, but
2395     somebody wanted the feature. From pcretest it can be activated by using
2396     both the P and the s flags.
2397    
2398     18. AC_PROG_LIBTOOL appeared twice in Makefile.in. Removed one.
2399    
2400     19. libpcre.pc was being incorrectly installed as executable.
2401    
2402     20. A couple of places in pcretest check for end-of-line by looking for '\n';
2403     it now also looks for '\r' so that it will work unmodified on Windows.
2404    
2405     21. Added Google's contributed C++ wrapper to the distribution.
2406    
2407     22. Added some untidy missing memory free() calls in pcretest, to keep
2408     Electric Fence happy when testing.
2409    
2410    
2411    
2412 nigel 75 Version 5.0 13-Sep-04
2413     ---------------------
2414    
2415     1. Internal change: literal characters are no longer packed up into items
2416     containing multiple characters in a single byte-string. Each character
2417     is now matched using a separate opcode. However, there may be more than one
2418     byte in the character in UTF-8 mode.
2419    
2420     2. The pcre_callout_block structure has two new fields: pattern_position and
2421     next_item_length. These contain the offset in the pattern to the next match
2422     item, and its length, respectively.
2423    
2424     3. The PCRE_AUTO_CALLOUT option for pcre_compile() requests the automatic
2425     insertion of callouts before each pattern item. Added the /C option to
2426     pcretest to make use of this.
2427    
2428     4. On the advice of a Windows user, the lines
2429    
2430     #if defined(_WIN32) || defined(WIN32)
2431     _setmode( _fileno( stdout ), 0x8000 );
2432     #endif /* defined(_WIN32) || defined(WIN32) */
2433    
2434     have been added to the source of pcretest. This apparently does useful
2435     magic in relation to line terminators.
2436    
2437     5. Changed "r" and "w" in the calls to fopen() in pcretest to "rb" and "wb"
2438     for the benefit of those environments where the "b" makes a difference.
2439    
2440     6. The icc compiler has the same options as gcc, but "configure" doesn't seem
2441     to know about it. I have put a hack into configure.in that adds in code
2442     to set GCC=yes if CC=icc. This seems to end up at a point in the
2443     generated configure script that is early enough to affect the setting of
2444     compiler options, which is what is needed, but I have no means of testing
2445     whether it really works. (The user who reported this had patched the
2446     generated configure script, which of course I cannot do.)
2447    
2448     LATER: After change 22 below (new libtool files), the configure script
2449     seems to know about icc (and also ecc). Therefore, I have commented out
2450     this hack in configure.in.
2451    
2452     7. Added support for pkg-config (2 patches were sent in).
2453    
2454     8. Negated POSIX character classes that used a combination of internal tables
2455     were completely broken. These were [[:^alpha:]], [[:^alnum:]], and
2456     [[:^ascii]]. Typically, they would match almost any characters. The other
2457     POSIX classes were not broken in this way.
2458    
2459     9. Matching the pattern "\b.*?" against "ab cd", starting at offset 1, failed
2460     to find the match, as PCRE was deluded into thinking that the match had to
2461     start at the start point or following a newline. The same bug applied to
2462     patterns with negative forward assertions or any backward assertions
2463     preceding ".*" at the start, unless the pattern required a fixed first
2464     character. This was a failing pattern: "(?!.bcd).*". The bug is now fixed.
2465    
2466     10. In UTF-8 mode, when moving forwards in the subject after a failed match
2467     starting at the last subject character, bytes beyond the end of the subject
2468     string were read.
2469    
2470     11. Renamed the variable "class" as "classbits" to make life easier for C++
2471     users. (Previously there was a macro definition, but it apparently wasn't
2472     enough.)
2473    
2474     12. Added the new field "tables" to the extra data so that tables can be passed
2475     in at exec time, or the internal tables can be re-selected. This allows
2476     a compiled regex to be saved and re-used at a later time by a different
2477     program that might have everything at different addresses.
2478    
2479     13. Modified the pcre-config script so that, when run on Solaris, it shows a
2480     -R library as well as a -L library.
2481    
2482     14. The debugging options of pcretest (-d on the command line or D on a
2483     pattern) showed incorrect output for anything following an extended class
2484     that contained multibyte characters and which was followed by a quantifier.
2485    
2486     15. Added optional support for general category Unicode character properties
2487     via the \p, \P, and \X escapes. Unicode property support implies UTF-8
2488     support. It adds about 90K to the size of the library. The meanings of the
2489     inbuilt class escapes such as \d and \s have NOT been changed.
2490    
2491     16. Updated pcredemo.c to include calls to free() to release the memory for the
2492     compiled pattern.
2493    
2494     17. The generated file chartables.c was being created in the source directory
2495     instead of in the building directory. This caused the build to fail if the
2496     source directory was different from the building directory, and was
2497     read-only.
2498    
2499     18. Added some sample Win commands from Mark Tetrode into the NON-UNIX-USE
2500     file. No doubt somebody will tell me if they don't make sense... Also added
2501     Dan Mooney's comments about building on OpenVMS.
2502    
2503     19. Added support for partial matching via the PCRE_PARTIAL option for
2504     pcre_exec() and the \P data escape in pcretest.
2505    
2506     20. Extended pcretest with 3 new pattern features:
2507    
2508     (i) A pattern option of the form ">rest-of-line" causes pcretest to
2509     write the compiled pattern to the file whose name is "rest-of-line".
2510     This is a straight binary dump of the data, with the saved pointer to
2511     the character tables forced to be NULL. The study data, if any, is
2512     written too. After writing, pcretest reads a new pattern.
2513    
2514     (ii) If, instead of a pattern, "<rest-of-line" is given, pcretest reads a
2515     compiled pattern from the given file. There must not be any
2516     occurrences of "<" in the file name (pretty unlikely); if there are,
2517     pcretest will instead treat the initial "<" as a pattern delimiter.
2518     After reading in the pattern, pcretest goes on to read data lines as
2519     usual.
2520    
2521     (iii) The F pattern option causes pcretest to flip the bytes in the 32-bit
2522     and 16-bit fields in a compiled pattern, to simulate a pattern that
2523     was compiled on a host of opposite endianness.
2524    
2525     21. The pcre-exec() function can now cope with patterns that were compiled on
2526     hosts of opposite endianness, with this restriction:
2527    
2528     As for any compiled expression that is saved and used later, the tables
2529     pointer field cannot be preserved; the extra_data field in the arguments
2530     to pcre_exec() should be used to pass in a tables address if a value
2531     other than the default internal tables were used at compile time.
2532    
2533     22. Calling pcre_exec() with a negative value of the "ovecsize" parameter is
2534     now diagnosed as an error. Previously, most of the time, a negative number
2535     would have been treated as zero, but if in addition "ovector" was passed as
2536     NULL, a crash could occur.
2537    
2538     23. Updated the files ltmain.sh, config.sub, config.guess, and aclocal.m4 with
2539     new versions from the libtool 1.5 distribution (the last one is a copy of
2540     a file called libtool.m4). This seems to have fixed the need to patch
2541     "configure" to support Darwin 1.3 (which I used to do). However, I still
2542     had to patch ltmain.sh to ensure that ${SED} is set (it isn't on my
2543     workstation).
2544    
2545     24. Changed the PCRE licence to be the more standard "BSD" licence.
2546    
2547    
2548 nigel 73 Version 4.5 01-Dec-03
2549     ---------------------
2550    
2551     1. There has been some re-arrangement of the code for the match() function so
2552     that it can be compiled in a version that does not call itself recursively.
2553     Instead, it keeps those local variables that need separate instances for
2554     each "recursion" in a frame on the heap, and gets/frees frames whenever it
2555     needs to "recurse". Keeping track of where control must go is done by means
2556     of setjmp/longjmp. The whole thing is implemented by a set of macros that
2557     hide most of the details from the main code, and operates only if
2558     NO_RECURSE is defined while compiling pcre.c. If PCRE is built using the
2559     "configure" mechanism, "--disable-stack-for-recursion" turns on this way of
2560     operating.
2561    
2562     To make it easier for callers to provide specially tailored get/free
2563     functions for this usage, two new functions, pcre_stack_malloc, and
2564     pcre_stack_free, are used. They are always called in strict stacking order,
2565     and the size of block requested is always the same.
2566    
2567     The PCRE_CONFIG_STACKRECURSE info parameter can be used to find out whether
2568     PCRE has been compiled to use the stack or the heap for recursion. The
2569     -C option of pcretest uses this to show which version is compiled.
2570    
2571     A new data escape \S, is added to pcretest; it causes the amounts of store
2572     obtained and freed by both kinds of malloc/free at match time to be added
2573     to the output.
2574    
2575     2. Changed the locale test to use "fr_FR" instead of "fr" because that's
2576     what's available on my current Linux desktop machine.
2577    
2578     3. When matching a UTF-8 string, the test for a valid string at the start has
2579     been extended. If start_offset is not zero, PCRE now checks that it points
2580     to a byte that is the start of a UTF-8 character. If not, it returns
2581     PCRE_ERROR_BADUTF8_OFFSET (-11). Note: the whole string is still checked;
2582     this is necessary because there may be backward assertions in the pattern.
2583     When matching the same subject several times, it may save resources to use
2584     PCRE_NO_UTF8_CHECK on all but the first call if the string is long.
2585    
2586     4. The code for checking the validity of UTF-8 strings has been tightened so
2587     that it rejects (a) strings containing 0xfe or 0xff bytes and (b) strings
2588     containing "overlong sequences".
2589    
2590     5. Fixed a bug (appearing twice) that I could not find any way of exploiting!
2591     I had written "if ((digitab[*p++] && chtab_digit) == 0)" where the "&&"
2592     should have been "&", but it just so happened that all the cases this let
2593     through by mistake were picked up later in the function.
2594    
2595     6. I had used a variable called "isblank" - this is a C99 function, causing
2596     some compilers to warn. To avoid this, I renamed it (as "blankclass").
2597    
2598     7. Cosmetic: (a) only output another newline at the end of pcretest if it is
2599     prompting; (b) run "./pcretest /dev/null" at the start of the test script
2600     so the version is shown; (c) stop "make test" echoing "./RunTest".
2601    
2602     8. Added patches from David Burgess to enable PCRE to run on EBCDIC systems.
2603    
2604     9. The prototype for memmove() for systems that don't have it was using
2605     size_t, but the inclusion of the header that defines size_t was later. I've
2606     moved the #includes for the C headers earlier to avoid this.
2607    
2608     10. Added some adjustments to the code to make it easier to compiler on certain
2609     special systems:
2610    
2611     (a) Some "const" qualifiers were missing.
2612     (b) Added the macro EXPORT before all exported functions; by default this
2613     is defined to be empty.
2614     (c) Changed the dftables auxiliary program (that builds chartables.c) so
2615     that it reads its output file name as an argument instead of writing
2616     to the standard output and assuming this can be redirected.
2617    
2618     11. In UTF-8 mode, if a recursive reference (e.g. (?1)) followed a character
2619     class containing characters with values greater than 255, PCRE compilation
2620     went into a loop.
2621    
2622     12. A recursive reference to a subpattern that was within another subpattern
2623     that had a minimum quantifier of zero caused PCRE to crash. For example,
2624     (x(y(?2))z)? provoked this bug with a subject that got as far as the
2625     recursion. If the recursively-called subpattern itself had a zero repeat,
2626     that was OK.
2627    
2628     13. In pcretest, the buffer for reading a data line was set at 30K, but the
2629     buffer into which it was copied (for escape processing) was still set at
2630     1024, so long lines caused crashes.
2631    
2632     14. A pattern such as /[ab]{1,3}+/ failed to compile, giving the error
2633     "internal error: code overflow...". This applied to any character class
2634     that was followed by a possessive quantifier.
2635    
2636     15. Modified the Makefile to add libpcre.la as a prerequisite for
2637     libpcreposix.la because I was told this is needed for a parallel build to
2638     work.
2639    
2640     16. If a pattern that contained .* following optional items at the start was
2641     studied, the wrong optimizing data was generated, leading to matching
2642     errors. For example, studying /[ab]*.*c/ concluded, erroneously, that any
2643     matching string must start with a or b or c. The correct conclusion for
2644     this pattern is that a match can start with any character.
2645    
2646    
2647 nigel 71 Version 4.4 13-Aug-03
2648     ---------------------
2649    
2650     1. In UTF-8 mode, a character class containing characters with values between
2651     127 and 255 was not handled correctly if the compiled pattern was studied.
2652     In fixing this, I have also improved the studying algorithm for such
2653     classes (slightly).
2654    
2655     2. Three internal functions had redundant arguments passed to them. Removal
2656     might give a very teeny performance improvement.
2657    
2658     3. Documentation bug: the value of the capture_top field in a callout is *one
2659     more than* the number of the hightest numbered captured substring.
2660    
2661     4. The Makefile linked pcretest and pcregrep with -lpcre, which could result
2662     in incorrectly linking with a previously installed version. They now link
2663     explicitly with libpcre.la.
2664    
2665     5. configure.in no longer needs to recognize Cygwin specially.
2666    
2667     6. A problem in pcre.in for Windows platforms is fixed.
2668    
2669     7. If a pattern was successfully studied, and the -d (or /D) flag was given to
2670     pcretest, it used to include the size of the study block as part of its
2671     output. Unfortunately, the structure contains a field that has a different
2672     size on different hardware architectures. This meant that the tests that
2673     showed this size failed. As the block is currently always of a fixed size,
2674     this information isn't actually particularly useful in pcretest output, so
2675     I have just removed it.
2676    
2677     8. Three pre-processor statements accidentally did not start in column 1.
2678     Sadly, there are *still* compilers around that complain, even though
2679     standard C has not required this for well over a decade. Sigh.
2680    
2681     9. In pcretest, the code for checking callouts passed small integers in the
2682     callout_data field, which is a void * field. However, some picky compilers
2683     complained about the casts involved for this on 64-bit systems. Now
2684     pcretest passes the address of the small integer instead, which should get
2685     rid of the warnings.
2686    
2687     10. By default, when in UTF-8 mode, PCRE now checks for valid UTF-8 strings at
2688     both compile and run time, and gives an error if an invalid UTF-8 sequence
2689     is found. There is a option for disabling this check in cases where the
2690     string is known to be correct and/or the maximum performance is wanted.
2691    
2692     11. In response to a bug report, I changed one line in Makefile.in from
2693    
2694     -Wl,--out-implib,.libs/lib@WIN_PREFIX@pcreposix.dll.a \
2695     to
2696     -Wl,--out-implib,.libs/@WIN_PREFIX@libpcreposix.dll.a \
2697    
2698     to look similar to other lines, but I have no way of telling whether this
2699     is the right thing to do, as I do not use Windows. No doubt I'll get told
2700     if it's wrong...
2701    
2702    
2703 nigel 69 Version 4.3 21-May-03
2704     ---------------------
2705    
2706     1. Two instances of @WIN_PREFIX@ omitted from the Windows targets in the
2707     Makefile.
2708    
2709     2. Some refactoring to improve the quality of the code:
2710    
2711     (i) The utf8_table... variables are now declared "const".
2712    
2713     (ii) The code for \cx, which used the "case flipping" table to upper case
2714     lower case letters, now just substracts 32. This is ASCII-specific,
2715     but the whole concept of \cx is ASCII-specific, so it seems
2716     reasonable.
2717    
2718     (iii) PCRE was using its character types table to recognize decimal and
2719     hexadecimal digits in the pattern. This is silly, because it handles
2720     only 0-9, a-f, and A-F, but the character types table is locale-
2721     specific, which means strange things might happen. A private
2722     table is now used for this - though it costs 256 bytes, a table is
2723     much faster than multiple explicit tests. Of course, the standard
2724     character types table is still used for matching digits in subject
2725     strings against \d.
2726    
2727     (iv) Strictly, the identifier ESC_t is reserved by POSIX (all identifiers
2728     ending in _t are). So I've renamed it as ESC_tee.
2729    
2730     3. The first argument for regexec() in the POSIX wrapper should have been
2731     defined as "const".
2732    
2733     4. Changed pcretest to use malloc() for its buffers so that they can be
2734     Electric Fenced for debugging.
2735    
2736     5. There were several places in the code where, in UTF-8 mode, PCRE would try
2737     to read one or more bytes before the start of the subject string. Often this
2738     had no effect on PCRE's behaviour, but in some circumstances it could
2739     provoke a segmentation fault.
2740    
2741     6. A lookbehind at the start of a pattern in UTF-8 mode could also cause PCRE
2742     to try to read one or more bytes before the start of the subject string.
2743    
2744     7. A lookbehind in a pattern matched in non-UTF-8 mode on a PCRE compiled with
2745     UTF-8 support could misbehave in various ways if the subject string
2746     contained bytes with the 0x80 bit set and the 0x40 bit unset in a lookbehind
2747     area. (PCRE was not checking for the UTF-8 mode flag, and trying to move
2748     back over UTF-8 characters.)
2749    
2750    
2751 nigel 67 Version 4.2 14-Apr-03
2752     ---------------------
2753    
2754     1. Typo "#if SUPPORT_UTF8" instead of "#ifdef SUPPORT_UTF8" fixed.
2755    
2756     2. Changes to the building process, supplied by Ronald Landheer-Cieslak
2757     [ON_WINDOWS]: new variable, "#" on non-Windows platforms
2758     [NOT_ON_WINDOWS]: new variable, "#" on Windows platforms
2759     [WIN_PREFIX]: new variable, "cyg" for Cygwin
2760     * Makefile.in: use autoconf substitution for OBJEXT, EXEEXT, BUILD_OBJEXT
2761     and BUILD_EXEEXT
2762     Note: automatic setting of the BUILD variables is not yet working
2763     set CPPFLAGS and BUILD_CPPFLAGS (but don't use yet) - should be used at
2764     compile-time but not at link-time
2765     [LINK]: use for linking executables only
2766     make different versions for Windows and non-Windows
2767     [LINKLIB]: new variable, copy of UNIX-style LINK, used for linking
2768     libraries
2769     [LINK_FOR_BUILD]: new variable
2770     [OBJEXT]: use throughout
2771     [EXEEXT]: use throughout
2772     <winshared>: new target
2773     <wininstall>: new target
2774     <dftables.o>: use native compiler
2775     <dftables>: use native linker
2776     <install>: handle Windows platform correctly
2777     <clean>: ditto
2778     <check>: ditto
2779     copy DLL to top builddir before testing
2780    
2781     As part of these changes, -no-undefined was removed again. This was reported
2782     to give trouble on HP-UX 11.0, so getting rid of it seems like a good idea
2783     in any case.
2784    
2785     3. Some tidies to get rid of compiler warnings:
2786    
2787     . In the match_data structure, match_limit was an unsigned long int, whereas
2788     match_call_count was an int. I've made them both unsigned long ints.
2789    
2790     . In pcretest the fact that a const uschar * doesn't automatically cast to
2791     a void * provoked a warning.
2792    
2793     . Turning on some more compiler warnings threw up some "shadow" variables
2794     and a few more missing casts.
2795    
2796     4. If PCRE was complied with UTF-8 support, but called without the PCRE_UTF8
2797     option, a class that contained a single character with a value between 128
2798     and 255 (e.g. /[\xFF]/) caused PCRE to crash.
2799    
2800     5. If PCRE was compiled with UTF-8 support, but called without the PCRE_UTF8
2801     option, a class that contained several characters, but with at least one
2802     whose value was between 128 and 255 caused PCRE to crash.
2803    
2804    
2805 nigel 65 Version 4.1 12-Mar-03
2806     ---------------------
2807 nigel 63
2808 nigel 65 1. Compiling with gcc -pedantic found a couple of places where casts were
2809     needed, and a string in dftables.c that was longer than standard compilers are
2810     required to support.
2811    
2812     2. Compiling with Sun's compiler found a few more places where the code could
2813     be tidied up in order to avoid warnings.
2814    
2815     3. The variables for cross-compiling were called HOST_CC and HOST_CFLAGS; the
2816     first of these names is deprecated in the latest Autoconf in favour of the name
2817     CC_FOR_BUILD, because "host" is typically used to mean the system on which the
2818     compiled code will be run. I can't find a reference for HOST_CFLAGS, but by
2819     analogy I have changed it to CFLAGS_FOR_BUILD.
2820    
2821     4. Added -no-undefined to the linking command in the Makefile, because this is
2822     apparently helpful for Windows. To make it work, also added "-L. -lpcre" to the
2823     linking step for the pcreposix library.
2824    
2825     5. PCRE was failing to diagnose the case of two named groups with the same
2826     name.
2827    
2828     6. A problem with one of PCRE's optimizations was discovered. PCRE remembers a
2829     literal character that is needed in the subject for a match, and scans along to
2830     ensure that it is present before embarking on the full matching process. This
2831     saves time in cases of nested unlimited repeats that are never going to match.
2832     Problem: the scan can take a lot of time if the subject is very long (e.g.
2833     megabytes), thus penalizing straightforward matches. It is now done only if the
2834     amount of subject to be scanned is less than 1000 bytes.
2835    
2836     7. A lesser problem with the same optimization is that it was recording the
2837     first character of an anchored pattern as "needed", thus provoking a search
2838     right along the subject, even when the first match of the pattern was going to
2839     fail. The "needed" character is now not set for anchored patterns, unless it
2840     follows something in the pattern that is of non-fixed length. Thus, it still
2841     fulfils its original purpose of finding quick non-matches in cases of nested
2842     unlimited repeats, but isn't used for simple anchored patterns such as /^abc/.
2843    
2844    
2845     Version 4.0 17-Feb-03
2846     ---------------------
2847    
2848 nigel 63 1. If a comment in an extended regex that started immediately after a meta-item
2849     extended to the end of string, PCRE compiled incorrect data. This could lead to
2850     all kinds of weird effects. Example: /#/ was bad; /()#/ was bad; /a#/ was not.
2851    
2852     2. Moved to autoconf 2.53 and libtool 1.4.2.
2853    
2854     3. Perl 5.8 no longer needs "use utf8" for doing UTF-8 things. Consequently,
2855     the special perltest8 script is no longer needed - all the tests can be run
2856     from a single perltest script.
2857    
2858     4. From 5.004, Perl has not included the VT character (0x0b) in the set defined
2859     by \s. It has now been removed in PCRE. This means it isn't recognized as
2860     whitespace in /x regexes too, which is the same as Perl. Note that the POSIX
2861     class [:space:] *does* include VT, thereby creating a mess.
2862    
2863     5. Added the class [:blank:] (a GNU extension from Perl 5.8) to match only
2864     space and tab.
2865    
2866     6. Perl 5.005 was a long time ago. It's time to amalgamate the tests that use
2867     its new features into the main test script, reducing the number of scripts.
2868    
2869     7. Perl 5.8 has changed the meaning of patterns like /a(?i)b/. Earlier versions
2870     were backward compatible, and made the (?i) apply to the whole pattern, as if
2871     /i were given. Now it behaves more logically, and applies the option setting
2872     only to what follows. PCRE has been changed to follow suit. However, if it
2873     finds options settings right at the start of the pattern, it extracts them into
2874     the global options, as before. Thus, they show up in the info data.
2875    
2876     8. Added support for the \Q...\E escape sequence. Characters in between are
2877     treated as literals. This is slightly different from Perl in that $ and @ are
2878     also handled as literals inside the quotes. In Perl, they will cause variable
2879     interpolation. Note the following examples:
2880    
2881     Pattern PCRE matches Perl matches
2882    
2883     \Qabc$xyz\E abc$xyz abc followed by the contents of $xyz
2884     \Qabc\$xyz\E abc\$xyz abc\$xyz
2885     \Qabc\E\$\Qxyz\E abc$xyz abc$xyz
2886    
2887     For compatibility with Perl, \Q...\E sequences are recognized inside character
2888     classes as well as outside them.
2889    
2890     9. Re-organized 3 code statements in pcretest to avoid "overflow in
2891     floating-point constant arithmetic" warnings from a Microsoft compiler. Added a
2892     (size_t) cast to one statement in pcretest and one in pcreposix to avoid
2893     signed/unsigned warnings.
2894    
2895     10. SunOS4 doesn't have strtoul(). This was used only for unpicking the -o
2896     option for pcretest, so I've replaced it by a simple function that does just
2897     that job.
2898    
2899     11. pcregrep was ending with code 0 instead of 2 for the commands "pcregrep" or
2900     "pcregrep -".
2901    
2902     12. Added "possessive quantifiers" ?+, *+, ++, and {,}+ which come from Sun's
2903     Java package. This provides some syntactic sugar for simple cases of what my
2904     documentation calls "once-only subpatterns". A pattern such as x*+ is the same
2905     as (?>x*). In other words, if what is inside (?>...) is just a single repeated
2906     item, you can use this simplified notation. Note that only makes sense with
2907     greedy quantifiers. Consequently, the use of the possessive quantifier forces
2908     greediness, whatever the setting of the PCRE_UNGREEDY option.
2909    
2910     13. A change of greediness default within a pattern was not taking effect at
2911     the current level for patterns like /(b+(?U)a+)/. It did apply to parenthesized
2912     subpatterns that followed. Patterns like /b+(?U)a+/ worked because the option
2913     was abstracted outside.
2914    
2915     14. PCRE now supports the \G assertion. It is true when the current matching
2916     position is at the start point of the match. This differs from \A when the
2917     starting offset is non-zero. Used with the /g option of pcretest (or similar
2918     code), it works in the same way as it does for Perl's /g option. If all
2919     alternatives of a regex begin with \G, the expression is anchored to the start
2920     match position, and the "anchored" flag is set in the compiled expression.
2921    
2922     15. Some bugs concerning the handling of certain option changes within patterns
2923     have been fixed. These applied to options other than (?ims). For example,
2924     "a(?x: b c )d" did not match "XabcdY" but did match "Xa b c dY". It should have
2925     been the other way round. Some of this was related to change 7 above.
2926    
2927     16. PCRE now gives errors for /[.x.]/ and /[=x=]/ as unsupported POSIX
2928     features, as Perl does. Previously, PCRE gave the warnings only for /[[.x.]]/
2929     and /[[=x=]]/. PCRE now also gives an error for /[:name:]/ because it supports
2930     POSIX classes only within a class (e.g. /[[:alpha:]]/).
2931    
2932     17. Added support for Perl's \C escape. This matches one byte, even in UTF8
2933     mode. Unlike ".", it always matches newline, whatever the setting of
2934     PCRE_DOTALL. However, PCRE does not permit \C to appear in lookbehind
2935     assertions. Perl allows it, but it doesn't (in general) work because it can't
2936     calculate the length of the lookbehind. At least, that's the case for Perl
2937     5.8.0 - I've been told they are going to document that it doesn't work in
2938     future.
2939    
2940     18. Added an error diagnosis for escapes that PCRE does not support: these are
2941     \L, \l, \N, \P, \p, \U, \u, and \X.
2942    
2943     19. Although correctly diagnosing a missing ']' in a character class, PCRE was
2944     reading past the end of the pattern in cases such as /[abcd/.
2945    
2946     20. PCRE was getting more memory than necessary for patterns with classes that
2947     contained both POSIX named classes and other characters, e.g. /[[:space:]abc/.
2948    
2949     21. Added some code, conditional on #ifdef VPCOMPAT, to make life easier for
2950     compiling PCRE for use with Virtual Pascal.
2951    
2952     22. Small fix to the Makefile to make it work properly if the build is done
2953     outside the source tree.
2954    
2955     23. Added a new extension: a condition to go with recursion. If a conditional
2956     subpattern starts with (?(R) the "true" branch is used if recursion has
2957     happened, whereas the "false" branch is used only at the top level.
2958    
2959     24. When there was a very long string of literal characters (over 255 bytes
2960     without UTF support, over 250 bytes with UTF support), the computation of how
2961     much memory was required could be incorrect, leading to segfaults or other
2962     strange effects.
2963    
2964     25. PCRE was incorrectly assuming anchoring (either to start of subject or to
2965     start of line for a non-DOTALL pattern) when a pattern started with (.*) and
2966     there was a subsequent back reference to those brackets. This meant that, for
2967     example, /(.*)\d+\1/ failed to match "abc123bc". Unfortunately, it isn't
2968     possible to check for precisely this case. All we can do is abandon the
2969     optimization if .* occurs inside capturing brackets when there are any back
2970     references whatsoever. (See below for a better fix that came later.)
2971    
2972     26. The handling of the optimization for finding the first character of a
2973     non-anchored pattern, and for finding a character that is required later in the
2974     match were failing in some cases. This didn't break the matching; it just
2975     failed to optimize when it could. The way this is done has been re-implemented.
2976    
2977     27. Fixed typo in error message for invalid (?R item (it said "(?p").
2978    
2979     28. Added a new feature that provides some of the functionality that Perl
2980     provides with (?{...}). The facility is termed a "callout". The way it is done
2981     in PCRE is for the caller to provide an optional function, by setting
2982     pcre_callout to its entry point. Like pcre_malloc and pcre_free, this is a
2983     global variable. By default it is unset, which disables all calling out. To get
2984     the function called, the regex must include (?C) at appropriate points. This
2985     is, in fact, equivalent to (?C0), and any number <= 255 may be given with (?C).
2986     This provides a means of identifying different callout points. When PCRE
2987     reaches such a point in the regex, if pcre_callout has been set, the external
2988     function is called. It is provided with data in a structure called
2989     pcre_callout_block, which is defined in pcre.h. If the function returns 0,
2990     matching continues; if it returns a non-zero value, the match at the current
2991     point fails. However, backtracking will occur if possible. [This was changed
2992     later and other features added - see item 49 below.]
2993    
2994     29. pcretest is upgraded to test the callout functionality. It provides a
2995     callout function that displays information. By default, it shows the start of
2996     the match and the current position in the text. There are some new data escapes
2997     to vary what happens:
2998    
2999     \C+ in addition, show current contents of captured substrings
3000     \C- do not supply a callout function
3001     \C!n return 1 when callout number n is reached
3002     \C!n!m return 1 when callout number n is reached for the mth time
3003    
3004     30. If pcregrep was called with the -l option and just a single file name, it
3005     output "<stdin>" if a match was found, instead of the file name.
3006    
3007     31. Improve the efficiency of the POSIX API to PCRE. If the number of capturing
3008     slots is less than POSIX_MALLOC_THRESHOLD, use a block on the stack to pass to
3009     pcre_exec(). This saves a malloc/free per call. The default value of
3010     POSIX_MALLOC_THRESHOLD is 10; it can be changed by --with-posix-malloc-threshold
3011     when configuring.
3012    
3013     32. The default maximum size of a compiled pattern is 64K. There have been a
3014     few cases of people hitting this limit. The code now uses macros to handle the
3015     storing of links as offsets within the compiled pattern. It defaults to 2-byte
3016     links, but this can be changed to 3 or 4 bytes by --with-link-size when
3017     configuring. Tests 2 and 5 work only with 2-byte links because they output
3018     debugging information about compiled patterns.
3019    
3020     33. Internal code re-arrangements:
3021    
3022     (a) Moved the debugging function for printing out a compiled regex into
3023     its own source file (printint.c) and used #include to pull it into
3024     pcretest.c and, when DEBUG is defined, into pcre.c, instead of having two
3025     separate copies.
3026    
3027     (b) Defined the list of op-code names for debugging as a macro in
3028     internal.h so that it is next to the definition of the opcodes.
3029    
3030     (c) Defined a table of op-code lengths for simpler skipping along compiled
3031     code. This is again a macro in internal.h so that it is next to the
3032     definition of the opcodes.
3033    
3034     34. Added support for recursive calls to individual subpatterns, along the
3035     lines of Robin Houston's patch (but implemented somewhat differently).
3036    
3037     35. Further mods to the Makefile to help Win32. Also, added code to pcregrep to
3038     allow it to read and process whole directories in Win32. This code was
3039     contributed by Lionel Fourquaux; it has not been tested by me.
3040    
3041     36. Added support for named subpatterns. The Python syntax (?P<name>...) is
3042     used to name a group. Names consist of alphanumerics and underscores, and must
3043     be unique. Back references use the syntax (?P=name) and recursive calls use
3044     (?P>name) which is a PCRE extension to the Python extension. Groups still have
3045     numbers. The function pcre_fullinfo() can be used after compilation to extract
3046     a name/number map. There are three relevant calls:
3047    
3048     PCRE_INFO_NAMEENTRYSIZE yields the size of each entry in the map
3049     PCRE_INFO_NAMECOUNT yields the number of entries
3050     PCRE_INFO_NAMETABLE yields a pointer to the map.
3051    
3052     The map is a vector of fixed-size entries. The size of each entry depends on
3053     the length of the longest name used. The first two bytes of each entry are the
3054     group number, most significant byte first. There follows the corresponding
3055     name, zero terminated. The names are in alphabetical order.
3056    
3057     37. Make the maximum literal string in the compiled code 250 for the non-UTF-8
3058     case instead of 255. Making it the same both with and without UTF-8 support
3059     means that the same test output works with both.
3060    
3061     38. There was a case of malloc(0) in the POSIX testing code in pcretest. Avoid
3062     calling malloc() with a zero argument.
3063    
3064     39. Change 25 above had to resort to a heavy-handed test for the .* anchoring
3065     optimization. I've improved things by keeping a bitmap of backreferences with
3066     numbers 1-31 so that if .* occurs inside capturing brackets that are not in
3067     fact referenced, the optimization can be applied. It is unlikely that a
3068     relevant occurrence of .* (i.e. one which might indicate anchoring or forcing
3069     the match to follow \n) will appear inside brackets with a number greater than
3070     31, but if it does, any back reference > 31 suppresses the optimization.
3071    
3072     40. Added a new compile-time option PCRE_NO_AUTO_CAPTURE. This has the effect
3073     of disabling numbered capturing parentheses. Any opening parenthesis that is
3074     not followed by ? behaves as if it were followed by ?: but named parentheses
3075     can still be used for capturing (and they will acquire numbers in the usual
3076     way).
3077    
3078     41. Redesigned the return codes from the match() function into yes/no/error so
3079     that errors can be passed back from deep inside the nested calls. A malloc
3080     failure while inside a recursive subpattern call now causes the
3081     PCRE_ERROR_NOMEMORY return instead of quietly going wrong.
3082    
3083     42. It is now possible to set a limit on the number of times the match()
3084     function is called in a call to pcre_exec(). This facility makes it possible to
3085     limit the amount of recursion and backtracking, though not in a directly
3086     obvious way, because the match() function is used in a number of different
3087     circumstances. The count starts from zero for each position in the subject
3088     string (for non-anchored patterns). The default limit is, for compatibility, a
3089     large number, namely 10 000 000. You can change this in two ways:
3090    
3091     (a) When configuring PCRE before making, you can use --with-match-limit=n
3092     to set a default value for the compiled library.
3093    
3094     (b) For each call to pcre_exec(), you can pass a pcre_extra block in which
3095     a different value is set. See 45 below.
3096    
3097     If the limit is exceeded, pcre_exec() returns PCRE_ERROR_MATCHLIMIT.
3098    
3099     43. Added a new function pcre_config(int, void *) to enable run-time extraction
3100     of things that can be changed at compile time. The first argument specifies
3101     what is wanted and the second points to where the information is to be placed.
3102     The current list of available information is:
3103    
3104     PCRE_CONFIG_UTF8
3105    
3106     The output is an integer that is set to one if UTF-8 support is available;
3107     otherwise it is set to zero.
3108    
3109     PCRE_CONFIG_NEWLINE
3110    
3111     The output is an integer that it set to the value of the code that is used for
3112     newline. It is either LF (10) or CR (13).
3113    
3114     PCRE_CONFIG_LINK_SIZE
3115    
3116     The output is an integer that contains the number of bytes used for internal
3117     linkage in compiled expressions. The value is 2, 3, or 4. See item 32 above.
3118    
3119     PCRE_CONFIG_POSIX_MALLOC_THRESHOLD
3120    
3121     The output is an integer that contains the threshold above which the POSIX
3122     interface uses malloc() for output vectors. See item 31 above.
3123    
3124     PCRE_CONFIG_MATCH_LIMIT
3125    
3126     The output is an unsigned integer that contains the default limit of the number
3127     of match() calls in a pcre_exec() execution. See 42 above.
3128    
3129     44. pcretest has been upgraded by the addition of the -C option. This causes it
3130     to extract all the available output from the new pcre_config() function, and to
3131     output it. The program then exits immediately.
3132    
3133     45. A need has arisen to pass over additional data with calls to pcre_exec() in
3134     order to support additional features. One way would have been to define
3135     pcre_exec2() (for example) with extra arguments, but this would not have been
3136     extensible, and would also have required all calls to the original function to
3137     be mapped to the new one. Instead, I have chosen to extend the mechanism that
3138     is used for passing in "extra" data from pcre_study().
3139    
3140     The pcre_extra structure is now exposed and defined in pcre.h. It currently
3141     contains the following fields:
3142    
3143     flags a bitmap indicating which of the following fields are set
3144     study_data opaque data from pcre_study()
3145     match_limit a way of specifying a limit on match() calls for a specific
3146     call to pcre_exec()
3147     callout_data data for callouts (see 49 below)
3148    
3149     The flag bits are also defined in pcre.h, and are
3150    
3151     PCRE_EXTRA_STUDY_DATA
3152     PCRE_EXTRA_MATCH_LIMIT
3153     PCRE_EXTRA_CALLOUT_DATA
3154    
3155     The pcre_study() function now returns one of these new pcre_extra blocks, with
3156     the actual study data pointed to by the study_data field, and the
3157     PCRE_EXTRA_STUDY_DATA flag set. This can be passed directly to pcre_exec() as
3158     before. That is, this change is entirely upwards-compatible and requires no
3159     change to existing code.
3160    
3161     If you want to pass in additional data to pcre_exec(), you can either place it
3162     in a pcre_extra block provided by pcre_study(), or create your own pcre_extra
3163     block.
3164    
3165     46. pcretest has been extended to test the PCRE_EXTRA_MATCH_LIMIT feature. If a
3166     data string contains the escape sequence \M, pcretest calls pcre_exec() several
3167     times with different match limits, until it finds the minimum value needed for
3168     pcre_exec() to complete. The value is then output. This can be instructive; for
3169     most simple matches the number is quite small, but for pathological cases it
3170     gets very large very quickly.
3171    
3172     47. There's a new option for pcre_fullinfo() called PCRE_INFO_STUDYSIZE. It
3173     returns the size of the data block pointed to by the study_data field in a
3174     pcre_extra block, that is, the value that was passed as the argument to
3175     pcre_malloc() when PCRE was getting memory in which to place the information
3176     created by pcre_study(). The fourth argument should point to a size_t variable.
3177     pcretest has been extended so that this information is shown after a successful
3178     pcre_study() call when information about the compiled regex is being displayed.
3179    
3180     48. Cosmetic change to Makefile: there's no need to have / after $(DESTDIR)
3181     because what follows is always an absolute path. (Later: it turns out that this
3182     is more than cosmetic for MinGW, because it doesn't like empty path
3183     components.)
3184    
3185     49. Some changes have been made to the callout feature (see 28 above):
3186    
3187     (i) A callout function now has three choices for what it returns:
3188    
3189     0 => success, carry on matching
3190     > 0 => failure at this point, but backtrack if possible
3191     < 0 => serious error, return this value from pcre_exec()
3192    
3193     Negative values should normally be chosen from the set of PCRE_ERROR_xxx
3194     values. In particular, returning PCRE_ERROR_NOMATCH forces a standard
3195     "match failed" error. The error number PCRE_ERROR_CALLOUT is reserved for
3196     use by callout functions. It will never be used by PCRE itself.
3197    
3198     (ii) The pcre_extra structure (see 45 above) has a void * field called
3199     callout_data, with corresponding flag bit PCRE_EXTRA_CALLOUT_DATA. The
3200     pcre_callout_block structure has a field of the same name. The contents of
3201     the field passed in the pcre_extra structure are passed to the callout
3202     function in the corresponding field in the callout block. This makes it
3203     easier to use the same callout-containing regex from multiple threads. For
3204     testing, the pcretest program has a new data escape
3205    
3206     \C*n pass the number n (may be negative) as callout_data
3207    
3208     If the callout function in pcretest receives a non-zero value as
3209     callout_data, it returns that value.
3210    
3211     50. Makefile wasn't handling CFLAGS properly when compiling dftables. Also,
3212     there were some redundant $(CFLAGS) in commands that are now specified as
3213     $(LINK), which already includes $(CFLAGS).
3214    
3215     51. Extensions to UTF-8 support are listed below. These all apply when (a) PCRE
3216     has been compiled with UTF-8 support *and* pcre_compile() has been compiled
3217     with the PCRE_UTF8 flag. Patterns that are compiled without that flag assume
3218     one-byte characters throughout. Note that case-insensitive matching applies
3219     only to characters whose values are less than 256. PCRE doesn't support the
3220     notion of cases for higher-valued characters.
3221    
3222     (i) A character class whose characters are all within 0-255 is handled as
3223     a bit map, and the map is inverted for negative classes. Previously, a
3224     character > 255 always failed to match such a class; however it should
3225     match if the class was a negative one (e.g. [^ab]). This has been fixed.
3226    
3227     (ii) A negated character class with a single character < 255 is coded as
3228     "not this character" (OP_NOT). This wasn't working properly when the test
3229     character was multibyte, either singly or repeated.
3230    
3231     (iii) Repeats of multibyte characters are now handled correctly in UTF-8
3232     mode, for example: \x{100}{2,3}.
3233    
3234     (iv) The character escapes \b, \B, \d, \D, \s, \S, \w, and \W (either
3235     singly or repeated) now correctly test multibyte characters. However,
3236     PCRE doesn't recognize any characters with values greater than 255 as
3237     digits, spaces, or word characters. Such characters always match \D, \S,
3238     and \W, and never match \d, \s, or \w.
3239    
3240     (v) Classes may now contain characters and character ranges with values
3241     greater than 255. For example: [ab\x{100}-\x{400}].
3242    
3243     (vi) pcregrep now has a --utf-8 option (synonym -u) which makes it call
3244     PCRE in UTF-8 mode.
3245    
3246     52. The info request value PCRE_INFO_FIRSTCHAR has been renamed
3247     PCRE_INFO_FIRSTBYTE because it is a byte value. However, the old name is
3248     retained for backwards compatibility. (Note that LASTLITERAL is also a byte
3249     value.)
3250    
3251     53. The single man page has become too large. I have therefore split it up into
3252     a number of separate man pages. These also give rise to individual HTML pages;
3253     these are now put in a separate directory, and there is an index.html page that
3254     lists them all. Some hyperlinking between the pages has been installed.
3255    
3256     54. Added convenience functions for handling named capturing parentheses.
3257    
3258     55. Unknown escapes inside character classes (e.g. [\M]) and escapes that
3259     aren't interpreted therein (e.g. [\C]) are literals in Perl. This is now also
3260     true in PCRE, except when the PCRE_EXTENDED option is set, in which case they
3261     are faulted.
3262    
3263     56. Introduced HOST_CC and HOST_CFLAGS which can be set in the environment when
3264     calling configure. These values are used when compiling the dftables.c program
3265     which is run to generate the source of the default character tables. They
3266     default to the values of CC and CFLAGS. If you are cross-compiling PCRE,
3267     you will need to set these values.
3268    
3269     57. Updated the building process for Windows DLL, as provided by Fred Cox.
3270    
3271    
3272     Version 3.9 02-Jan-02
3273 nigel 61 ---------------------
3274    
3275     1. A bit of extraneous text had somehow crept into the pcregrep documentation.
3276    
3277     2. If --disable-static was given, the building process failed when trying to
3278     build pcretest and pcregrep. (For some reason it was using libtool to compile
3279     them, which is not right, as they aren't part of the library.)
3280    
3281    
3282 nigel 59 Version 3.8 18-Dec-01
3283     ---------------------
3284    
3285     1. The experimental UTF-8 code was completely screwed up. It was packing the
3286     bytes in the wrong order. How dumb can you get?
3287    
3288    
3289 nigel 57 Version 3.7 29-Oct-01
3290     ---------------------
3291    
3292     1. In updating pcretest to check change 1 of version 3.6, I screwed up.
3293     This caused pcretest, when used on the test data, to segfault. Unfortunately,
3294     this didn't happen under Solaris 8, where I normally test things.
3295    
3296 nigel 59 2. The Makefile had to be changed to make it work on BSD systems, where 'make'
3297     doesn't seem to recognize that ./xxx and xxx are the same file. (This entry
3298     isn't in ChangeLog distributed with 3.7 because I forgot when I hastily made
3299     this fix an hour or so after the initial 3.7 release.)
3300 nigel 57
3301 nigel 59
3302 nigel 55 Version 3.6 23-Oct-01
3303     ---------------------
3304    
3305     1. Crashed with /(sens|respons)e and \1ibility/ and "sense and sensibility" if
3306     offsets passed as NULL with zero offset count.
3307    
3308     2. The config.guess and config.sub files had not been updated when I moved to
3309     the latest autoconf.
3310    
3311    
3312 nigel 53 Version 3.5 15-Aug-01
3313     ---------------------
3314 nigel 5
3315 nigel 53 1. Added some missing #if !defined NOPOSIX conditionals in pcretest.c that
3316     had been forgotten.
3317    
3318     2. By using declared but undefined structures, we can avoid using "void"
3319     definitions in pcre.h while keeping the internal definitions of the structures
3320     private.
3321    
3322     3. The distribution is now built using autoconf 2.50 and libtool 1.4. From a
3323     user point of view, this means that both static and shared libraries are built
3324     by default, but this can be individually controlled. More of the work of
3325     handling this static/shared cases is now inside libtool instead of PCRE's make
3326     file.
3327    
3328     4. The pcretest utility is now installed along with pcregrep because it is
3329     useful for users (to test regexs) and by doing this, it automatically gets
3330     relinked by libtool. The documentation has been turned into a man page, so
3331     there are now .1, .txt, and .html versions in /doc.
3332    
3333     5. Upgrades to pcregrep:
3334     (i) Added long-form option names like gnu grep.
3335     (ii) Added --help to list all options with an explanatory phrase.
3336     (iii) Added -r, --recursive to recurse into sub-directories.
3337     (iv) Added -f, --file to read patterns from a file.
3338    
3339     6. pcre_exec() was referring to its "code" argument before testing that
3340     argument for NULL (and giving an error if it was NULL).
3341    
3342     7. Upgraded Makefile.in to allow for compiling in a different directory from
3343     the source directory.
3344    
3345     8. Tiny buglet in pcretest: when pcre_fullinfo() was called to retrieve the
3346     options bits, the pointer it was passed was to an int instead of to an unsigned
3347     long int. This mattered only on 64-bit systems.
3348    
3349     9. Fixed typo (3.4/1) in pcre.h again. Sigh. I had changed pcre.h (which is
3350     generated) instead of pcre.in, which it its source. Also made the same change
3351     in several of the .c files.
3352    
3353     10. A new release of gcc defines printf() as a macro, which broke pcretest
3354     because it had an ifdef in the middle of a string argument for printf(). Fixed
3355     by using separate calls to printf().
3356    
3357     11. Added --enable-newline-is-cr and --enable-newline-is-lf to the configure
3358     script, to force use of CR or LF instead of \n in the source. On non-Unix
3359     systems, the value can be set in config.h.
3360    
3361     12. The limit of 200 on non-capturing parentheses is a _nesting_ limit, not an
3362     absolute limit. Changed the text of the error message to make this clear, and
3363     likewise updated the man page.
3364    
3365     13. The limit of 99 on the number of capturing subpatterns has been removed.
3366     The new limit is 65535, which I hope will not be a "real" limit.
3367    
3368    
3369 nigel 51 Version 3.4 22-Aug-00
3370     ---------------------
3371    
3372     1. Fixed typo in pcre.h: unsigned const char * changed to const unsigned char *.
3373    
3374     2. Diagnose condition (?(0) as an error instead of crashing on matching.
3375    
3376    
3377 nigel 49 Version 3.3 01-Aug-00
3378     ---------------------
3379    
3380     1. If an octal character was given, but the value was greater than \377, it
3381     was not getting masked to the least significant bits, as documented. This could
3382     lead to crashes in some systems.
3383    
3384     2. Perl 5.6 (if not earlier versions) accepts classes like [a-\d] and treats
3385     the hyphen as a literal. PCRE used to give an error; it now behaves like Perl.
3386    
3387     3. Added the functions pcre_free_substring() and pcre_free_substring_list().
3388     These just pass their arguments on to (pcre_free)(), but they are provided
3389     because some uses of PCRE bind it to non-C systems that can call its functions,
3390     but cannot call free() or pcre_free() directly.
3391    
3392     4. Add "make test" as a synonym for "make check". Corrected some comments in
3393     the Makefile.
3394    
3395     5. Add $(DESTDIR)/ in front of all the paths in the "install" target in the
3396     Makefile.
3397    
3398     6. Changed the name of pgrep to pcregrep, because Solaris has introduced a
3399     command called pgrep for grepping around the active processes.
3400    
3401     7. Added the beginnings of support for UTF-8 character strings.
3402    
3403     8. Arranged for the Makefile to pass over the settings of CC, CFLAGS, and
3404     RANLIB to ./ltconfig so that they are used by libtool. I think these are all
3405     the relevant ones. (AR is not passed because ./ltconfig does its own figuring
3406     out for the ar command.)
3407    
3408    
3409 nigel 47 Version 3.2 12-May-00
3410     ---------------------
3411    
3412     This is purely a bug fixing release.
3413    
3414     1. If the pattern /((Z)+|A)*/ was matched agained ZABCDEFG it matched Z instead
3415     of ZA. This was just one example of several cases that could provoke this bug,
3416     which was introduced by change 9 of version 2.00. The code for breaking
3417     infinite loops after an iteration that matches an empty string was't working
3418     correctly.
3419    
3420     2. The pcretest program was not imitating Perl correctly for the pattern /a*/g
3421     when matched against abbab (for example). After matching an empty string, it
3422     wasn't forcing anchoring when setting PCRE_NOTEMPTY for the next attempt; this
3423     caused it to match further down the string than it should.
3424    
3425     3. The code contained an inclusion of sys/types.h. It isn't clear why this
3426     was there because it doesn't seem to be needed, and it causes trouble on some
3427     systems, as it is not a Standard C header. It has been removed.
3428    
3429     4. Made 4 silly changes to the source to avoid stupid compiler warnings that
3430     were reported on the Macintosh. The changes were from
3431    
3432     while ((c = *(++ptr)) != 0 && c != '\n');
3433     to
3434     while ((c = *(++ptr)) != 0 && c != '\n') ;
3435    
3436     Totally extraordinary, but if that's what it takes...
3437    
3438     5. PCRE is being used in one environment where neither memmove() nor bcopy() is
3439     available. Added HAVE_BCOPY and an autoconf test for it; if neither
3440     HAVE_MEMMOVE nor HAVE_BCOPY is set, use a built-in emulation function which
3441     assumes the way PCRE uses memmove() (always moving upwards).
3442    
3443     6. PCRE is being used in one environment where strchr() is not available. There
3444     was only one use in pcre.c, and writing it out to avoid strchr() probably gives
3445     faster code anyway.
3446    
3447    
3448 nigel 45 Version 3.1 09-Feb-00
3449     ---------------------
3450    
3451     The only change in this release is the fixing of some bugs in Makefile.in for
3452     the "install" target:
3453    
3454     (1) It was failing to install pcreposix.h.
3455    
3456     (2) It was overwriting the pcre.3 man page with the pcreposix.3 man page.
3457    
3458    
3459 nigel 43 Version 3.0 01-Feb-00
3460     ---------------------
3461 nigel 41
3462     1. Add support for the /+ modifier to perltest (to output $` like it does in
3463     pcretest).
3464    
3465     2. Add support for the /g modifier to perltest.
3466    
3467     3. Fix pcretest so that it behaves even more like Perl for /g when the pattern
3468     matches null strings.
3469    
3470     4. Fix perltest so that it doesn't do unwanted things when fed an empty
3471     pattern. Perl treats empty patterns specially - it reuses the most recent
3472     pattern, which is not what we want. Replace // by /(?#)/ in order to avoid this
3473     effect.
3474    
3475     5. The POSIX interface was broken in that it was just handing over the POSIX
3476     captured string vector to pcre_exec(), but (since release 2.00) PCRE has
3477     required a bigger vector, with some working space on the end. This means that
3478     the POSIX wrapper now has to get and free some memory, and copy the results.
3479    
3480 nigel 43 6. Added some simple autoconf support, placing the test data and the
3481     documentation in separate directories, re-organizing some of the
3482     information files, and making it build pcre-config (a GNU standard). Also added
3483     libtool support for building PCRE as a shared library, which is now the
3484     default.
3485 nigel 41
3486 nigel 43 7. Got rid of the leading zero in the definition of PCRE_MINOR because 08 and
3487     09 are not valid octal constants. Single digits will be used for minor values
3488     less than 10.
3489    
3490     8. Defined REG_EXTENDED and REG_NOSUB as zero in the POSIX header, so that
3491     existing programs that set these in the POSIX interface can use PCRE without
3492     modification.
3493    
3494     9. Added a new function, pcre_fullinfo() with an extensible interface. It can
3495     return all that pcre_info() returns, plus additional data. The pcre_info()
3496     function is retained for compatibility, but is considered to be obsolete.
3497    
3498     10. Added experimental recursion feature (?R) to handle one common case that
3499     Perl 5.6 will be able to do with (?p{...}).
3500    
3501     11. Added support for POSIX character classes like [:alpha:], which Perl is
3502     adopting.
3503    
3504    
3505 nigel 39 Version 2.08 31-Aug-99
3506     ----------------------
3507    
3508     1. When startoffset was not zero and the pattern began with ".*", PCRE was not
3509     trying to match at the startoffset position, but instead was moving forward to
3510     the next newline as if a previous match had failed.
3511    
3512     2. pcretest was not making use of PCRE_NOTEMPTY when repeating for /g and /G,
3513     and could get into a loop if a null string was matched other than at the start
3514     of the subject.
3515    
3516     3. Added definitions of PCRE_MAJOR and PCRE_MINOR to pcre.h so the version can
3517     be distinguished at compile time, and for completeness also added PCRE_DATE.
3518    
3519     5. Added Paul Sokolovsky's minor changes to make it easy to compile a Win32 DLL
3520     in GnuWin32 environments.
3521    
3522    
3523 nigel 37 Version 2.07 29-Jul-99
3524     ----------------------
3525    
3526     1. The documentation is now supplied in plain text form and HTML as well as in
3527     the form of man page sources.
3528    
3529     2. C++ compilers don't like assigning (void *) values to other pointer types.
3530     In particular this affects malloc(). Although there is no problem in Standard
3531     C, I've put in casts to keep C++ compilers happy.
3532    
3533     3. Typo on pcretest.c; a cast of (unsigned char *) in the POSIX regexec() call
3534     should be (const char *).
3535    
3536     4. If NOPOSIX is defined, pcretest.c compiles without POSIX support. This may
3537     be useful for non-Unix systems who don't want to bother with the POSIX stuff.
3538     However, I haven't made this a standard facility. The documentation doesn't
3539     mention it, and the Makefile doesn't support it.
3540    
3541     5. The Makefile now contains an "install" target, with editable destinations at
3542     the top of the file. The pcretest program is not installed.
3543    
3544     6. pgrep -V now gives the PCRE version number and date.
3545    
3546     7. Fixed bug: a zero repetition after a literal string (e.g. /abcde{0}/) was
3547     causing the entire string to be ignored, instead of just the last character.
3548    
3549     8. If a pattern like /"([^\\"]+|\\.)*"/ is applied in the normal way to a
3550     non-matching string, it can take a very, very long time, even for strings of
3551     quite modest length, because of the nested recursion. PCRE now does better in
3552     some of these cases. It does this by remembering the last required literal
3553     character in the pattern, and pre-searching the subject to ensure it is present
3554     before running the real match. In other words, it applies a heuristic to detect
3555     some types of certain failure quickly, and in the above example, if presented
3556     with a string that has no trailing " it gives "no match" very quickly.
3557    
3558     9. A new runtime option PCRE_NOTEMPTY causes null string matches to be ignored;
3559     other alternatives are tried instead.
3560    
3561    
3562 nigel 35 Version 2.06 09-Jun-99
3563     ----------------------
3564    
3565     1. Change pcretest's output for amount of store used to show just the code
3566     space, because the remainder (the data block) varies in size between 32-bit and
3567     64-bit systems.
3568    
3569     2. Added an extra argument to pcre_exec() to supply an offset in the subject to
3570     start matching at. This allows lookbehinds to work when searching for multiple
3571     occurrences in a string.
3572    
3573     3. Added additional options to pcretest for testing multiple occurrences:
3574    
3575     /+ outputs the rest of the string that follows a match
3576     /g loops for multiple occurrences, using the new startoffset argument
3577     /G loops for multiple occurrences by passing an incremented pointer
3578    
3579     4. PCRE wasn't doing the "first character" optimization for patterns starting
3580     with \b or \B, though it was doing it for other lookbehind assertions. That is,
3581     it wasn't noticing that a match for a pattern such as /\bxyz/ has to start with
3582     the letter 'x'. On long subject strings, this gives a significant speed-up.
3583    
3584    
3585 nigel 33 Version 2.05 21-Apr-99
3586     ----------------------
3587    
3588     1. Changed the type of magic_number from int to long int so that it works
3589     properly on 16-bit systems.
3590    
3591     2. Fixed a bug which caused patterns starting with .* not to work correctly
3592     when the subject string contained newline characters. PCRE was assuming
3593     anchoring for such patterns in all cases, which is not correct because .* will
3594     not pass a newline unless PCRE_DOTALL is set. It now assumes anchoring only if
3595     DOTALL is set at top level; otherwise it knows that patterns starting with .*
3596     must be retried after every newline in the subject.
3597    
3598    
3599 nigel 31 Version 2.04 18-Feb-99
3600     ----------------------
3601    
3602     1. For parenthesized subpatterns with repeats whose minimum was zero, the
3603     computation of the store needed to hold the pattern was incorrect (too large).
3604     If such patterns were nested a few deep, this could multiply and become a real
3605     problem.
3606    
3607     2. Added /M option to pcretest to show the memory requirement of a specific
3608     pattern. Made -m a synonym of -s (which does this globally) for compatibility.
3609    
3610     3. Subpatterns of the form (regex){n,m} (i.e. limited maximum) were being
3611     compiled in such a way that the backtracking after subsequent failure was
3612     pessimal. Something like (a){0,3} was compiled as (a)?(a)?(a)? instead of
3613     ((a)((a)(a)?)?)? with disastrous performance if the maximum was of any size.
3614    
3615    
3616 nigel 29 Version 2.03 02-Feb-99
3617     ----------------------
3618    
3619     1. Fixed typo and small mistake in man page.
3620    
3621 nigel 31 2. Added 4th condition (GPL supersedes if conflict) and created separate
3622     LICENCE file containing the conditions.
3623 nigel 29
3624     3. Updated pcretest so that patterns such as /abc\/def/ work like they do in
3625     Perl, that is the internal \ allows the delimiter to be included in the
3626     pattern. Locked out the use of \ as a delimiter. If \ immediately follows
3627     the final delimiter, add \ to the end of the pattern (to test the error).
3628    
3629     4. Added the convenience functions for extracting substrings after a successful
3630     match. Updated pcretest to make it able to test these functions.
3631    
3632    
3633 nigel 27 Version 2.02 14-Jan-99
3634     ----------------------
3635    
3636     1. Initialized the working variables associated with each extraction so that
3637     their saving and restoring doesn't refer to uninitialized store.
3638    
3639     2. Put dummy code into study.c in order to trick the optimizer of the IBM C
3640     compiler for OS/2 into generating correct code. Apparently IBM isn't going to
3641     fix the problem.
3642    
3643     3. Pcretest: the timing code wasn't using LOOPREPEAT for timing execution
3644     calls, and wasn't printing the correct value for compiling calls. Increased the
3645     default value of LOOPREPEAT, and the number of significant figures in the
3646     times.
3647    
3648     4. Changed "/bin/rm" in the Makefile to "-rm" so it works on Windows NT.
3649    
3650     5. Renamed "deftables" as "dftables" to get it down to 8 characters, to avoid
3651     a building problem on Windows NT with a FAT file system.
3652    
3653    
3654 nigel 25 Version 2.01 21-Oct-98
3655     ----------------------
3656    
3657     1. Changed the API for pcre_compile() to allow for the provision of a pointer
3658     to character tables built by pcre_maketables() in the current locale. If NULL
3659     is passed, the default tables are used.
3660    
3661    
3662 nigel 23 Version 2.00 24-Sep-98
3663 nigel 21 ----------------------
3664    
3665 nigel 23 1. Since the (>?) facility is in Perl 5.005, don't require PCRE_EXTRA to enable
3666     it any more.
3667    
3668     2. Allow quantification of (?>) groups, and make it work correctly.
3669    
3670     3. The first character computation wasn't working for (?>) groups.
3671    
3672     4. Correct the implementation of \Z (it is permitted to match on the \n at the
3673     end of the subject) and add 5.005's \z, which really does match only at the
3674     very end of the subject.
3675    
3676     5. Remove the \X "cut" facility; Perl doesn't have it, and (?> is neater.
3677    
3678     6. Remove the ability to specify CASELESS, MULTILINE, DOTALL, and
3679     DOLLAR_END_ONLY at runtime, to make it possible to implement the Perl 5.005
3680     localized options. All options to pcre_study() were also removed.
3681    
3682     7. Add other new features from 5.005:
3683    
3684     $(?<= positive lookbehind
3685     $(?<! negative lookbehind
3686     (?imsx-imsx) added the unsetting capability
3687     such a setting is global if at outer level; local otherwise
3688     (?imsx-imsx:) non-capturing groups with option setting
3689     (?(cond)re|re) conditional pattern matching
3690    
3691     A backreference to itself in a repeated group matches the previous
3692     captured string.
3693    
3694     8. General tidying up of studying (both automatic and via "study")
3695     consequential on the addition of new assertions.
3696    
3697     9. As in 5.005, unlimited repeated groups that could match an empty substring
3698     are no longer faulted at compile time. Instead, the loop is forcibly broken at
3699     runtime if any iteration does actually match an empty substring.
3700    
3701     10. Include the RunTest script in the distribution.
3702    
3703     11. Added tests from the Perl 5.005_02 distribution. This showed up a few
3704     discrepancies, some of which were old and were also with respect to 5.004. They
3705     have now been fixed.
3706    
3707    
3708     Version 1.09 28-Apr-98
3709     ----------------------
3710    
3711 nigel 21 1. A negated single character class followed by a quantifier with a minimum
3712     value of one (e.g. [^x]{1,6} ) was not compiled correctly. This could lead to
3713     program crashes, or just wrong answers. This did not apply to negated classes
3714     containing more than one character, or to minima other than one.
3715    
3716    
3717 nigel 19 Version 1.08 27-Mar-98
3718     ----------------------
3719    
3720     1. Add PCRE_UNGREEDY to invert the greediness of quantifiers.
3721    
3722     2. Add (?U) and (?X) to set PCRE_UNGREEDY and PCRE_EXTRA respectively. The
3723     latter must appear before anything that relies on it in the pattern.
3724    
3725    
3726 nigel 17 Version 1.07 16-Feb-98
3727     ----------------------
3728    
3729     1. A pattern such as /((a)*)*/ was not being diagnosed as in error (unlimited
3730     repeat of a potentially empty string).
3731    
3732    
3733 nigel 15 Version 1.06 23-Jan-98
3734     ----------------------
3735    
3736     1. Added Markus Oberhumer's little patches for C++.
3737    
3738     2. Literal strings longer than 255 characters were broken.
3739    
3740    
3741 nigel 13 Version 1.05 23-Dec-97
3742     ----------------------
3743    
3744     1. Negated character classes containing more than one character were failing if
3745     PCRE_CASELESS was set at run time.
3746    
3747    
3748 nigel 11 Version 1.04 19-Dec-97
3749     ----------------------
3750    
3751     1. Corrected the man page, where some "const" qualifiers had been omitted.
3752    
3753     2. Made debugging output print "{0,xxx}" instead of just "{,xxx}" to agree with
3754     input syntax.
3755    
3756     3. Fixed memory leak which occurred when a regex with back references was
3757     matched with an offsets vector that wasn't big enough. The temporary memory
3758     that is used in this case wasn't being freed if the match failed.
3759