/[pcre]/code/trunk/ChangeLog
ViewVC logotype

Contents of /code/trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 197 - (hide annotations) (download)
Tue Jul 31 10:50:18 2007 UTC (6 years, 11 months ago) by ph10
File size: 132375 byte(s)
Abolish the NULLWSLIMIT error at the expense of using more stack when an 
unlimited repeat could match an empty string. Also, doc tidies for a test 
release.

1 nigel 3 ChangeLog for PCRE
2     ------------------
3    
4 ph10 189 Version 7.3 05-Jul-07
5 ph10 157 ---------------------
6    
7 ph10 189 1. In the rejigging of the build system that eventually resulted in 7.1, the
8     line "#include <pcre.h>" was included in pcre_internal.h. The use of angle
9     brackets there is not right, since it causes compilers to look for an
10     installed pcre.h, not the version that is in the source that is being
11     compiled (which of course may be different). I have changed it back to:
12 ph10 197
13 ph10 189 #include "pcre.h"
14 ph10 197
15     I have a vague recollection that the change was concerned with compiling in
16     different directories, but in the new build system, that is taken care of
17     by the VPATH setting the Makefile.
18    
19 ph10 190 2. The pattern .*$ when run in not-DOTALL UTF-8 mode with newline=any failed
20     when the subject happened to end in the byte 0x85 (e.g. if the last
21     character was \x{1ec5}). *Character* 0x85 is one of the "any" newline
22     characters but of course it shouldn't be taken as a newline when it is part
23     of another character. The bug was that, for an unlimited repeat of . in
24     not-DOTALL UTF-8 mode, PCRE was advancing by bytes rather than by
25     characters when looking for a newline.
26 ph10 197
27     3. A small performance improvement in the DOTALL UTF-8 mode .* case.
28    
29     4. Debugging: adjusted the names of opcodes for different kinds of parentheses
30     in debug output.
31    
32 ph10 193 5. Arrange to use "%I64d" instead of "%lld" for long printing in the pcrecpp
33 ph10 197 unittest when running under MinGW.
34 ph10 189
35 ph10 197 6. ESC_K was left out of the EBCDIC table.
36 ph10 189
37 ph10 197 7. Change 7.0/38 introduced a new limit on the number of nested non-capturing
38     parentheses; I made it 1000, which seemed large enough. Unfortunately, the
39     limit also applies to "virtual nesting" when a pattern is recursive, and in
40     this case 1000 isn't so big. I have been able to remove this limit at the
41     expense of backing off one optimization in certain circumstances. Normally,
42     when pcre_exec() would call its internal match() function recursively and
43     immediately return the result unconditionally, it uses a "tail recursion"
44     feature to save stack. However, when a subpattern that can match an empty
45     string has an unlimited repetition quantifier, it no longer makes this
46     optimization. That gives it a stack frame in which to save the data for
47     checking that an empty string has been matched. Previously this was taken
48     from the 1000-entry workspace that had been reserved. So now there is no
49     explicit limit, but more stack is used.
50 ph10 189
51 ph10 197
52 ph10 189 Version 7.2 19-Jun-07
53     ---------------------
54    
55 ph10 157 1. If the fr_FR locale cannot be found for test 3, try the "french" locale,
56     which is apparently normally available under Windows.
57 ph10 159
58     2. Re-jig the pcregrep tests with different newline settings in an attempt
59     to make them independent of the local environment's newline setting.
60 ph10 157
61 ph10 160 3. Add code to configure.ac to remove -g from the CFLAGS default settings.
62 ph10 165
63 ph10 161 4. Some of the "internals" tests were previously cut out when the link size
64     was not 2, because the output contained actual offsets. The recent new
65 ph10 165 "Z" feature of pcretest means that these can be cut out, making the tests
66     usable with all link sizes.
67    
68 ph10 164 5. Implemented Stan Switzer's goto replacement for longjmp() when not using
69     stack recursion. This gives a massive performance boost under BSD, but just
70 ph10 165 a small improvement under Linux. However, it saves one field in the frame
71 ph10 164 in all cases.
72 ph10 172
73 ph10 166 6. Added more features from the forthcoming Perl 5.10:
74 ph10 172
75 ph10 166 (a) (?-n) (where n is a string of digits) is a relative subroutine or
76     recursion call. It refers to the nth most recently opened parentheses.
77 ph10 172
78 ph10 166 (b) (?+n) is also a relative subroutine call; it refers to the nth next
79 ph10 172 to be opened parentheses.
80    
81     (c) Conditions that refer to capturing parentheses can be specified
82 ph10 167 relatively, for example, (?(-2)... or (?(+3)...
83 ph10 172
84 ph10 168 (d) \K resets the start of the current match so that everything before
85 ph10 172 is not part of it.
86    
87 ph10 171 (e) \k{name} is synonymous with \k<name> and \k'name' (.NET compatible).
88 ph10 172
89 ph10 171 (f) \g{name} is another synonym - part of Perl 5.10's unification of
90 ph10 172 reference syntax.
91 ph10 182
92 ph10 175 (g) (?| introduces a group in which the numbering of parentheses in each
93 ph10 182 alternative starts with the same number.
94 ph10 172
95 ph10 182 (h) \h, \H, \v, and \V match horizontal and vertical whitespace.
96    
97 ph10 172 7. Added two new calls to pcre_fullinfo(): PCRE_INFO_OKPARTIAL and
98     PCRE_INFO_JCHANGED.
99    
100     8. A pattern such as (.*(.)?)* caused pcre_exec() to fail by either not
101     terminating or by crashing. Diagnosed by Viktor Griph; it was in the code
102 ph10 170 for detecting groups that can match an empty string.
103 ph10 159
104 ph10 172 9. A pattern with a very large number of alternatives (more than several
105     hundred) was running out of internal workspace during the pre-compile
106     phase, where pcre_compile() figures out how much memory will be needed. A
107     bit of new cunning has reduced the workspace needed for groups with
108     alternatives. The 1000-alternative test pattern now uses 12 bytes of
109     workspace instead of running out of the 4096 that are available.
110 ph10 182
111 ph10 176 10. Inserted some missing (unsigned int) casts to get rid of compiler warnings.
112 ph10 172
113 ph10 179 11. Applied patch from Google to remove an optimization that didn't quite work.
114     The report of the bug said:
115 ph10 182
116 ph10 179 pcrecpp::RE("a*").FullMatch("aaa") matches, while
117     pcrecpp::RE("a*?").FullMatch("aaa") does not, and
118 ph10 182 pcrecpp::RE("a*?\\z").FullMatch("aaa") does again.
119 ph10 185
120 ph10 184 12. If \p or \P was used in non-UTF-8 mode on a character greater than 127
121 ph10 185 it matched the wrong number of bytes.
122 ph10 172
123 ph10 179
124 ph10 155 Version 7.1 24-Apr-07
125 ph10 98 ---------------------
126    
127 ph10 111 1. Applied Bob Rossi and Daniel G's patches to convert the build system to one
128 ph10 122 that is more "standard", making use of automake and other Autotools. There
129 ph10 99 is some re-arrangement of the files and adjustment of comments consequent
130     on this.
131 ph10 111
132     2. Part of the patch fixed a problem with the pcregrep tests. The test of -r
133     for recursive directory scanning broke on some systems because the files
134     are not scanned in any specific order and on different systems the order
135     was different. A call to "sort" has been inserted into RunGrepTest for the
136     approprate test as a short-term fix. In the longer term there may be an
137 ph10 100 alternative.
138 ph10 111
139 ph10 100 3. I had an email from Eric Raymond about problems translating some of PCRE's
140 ph10 111 man pages to HTML (despite the fact that I distribute HTML pages, some
141     people do their own conversions for various reasons). The problems
142     concerned the use of low-level troff macros .br and .in. I have therefore
143     removed all such uses from the man pages (some were redundant, some could
144 ph10 113 be replaced by .nf/.fi pairs). The 132html script that I use to generate
145     HTML has been updated to handle .nf/.fi and to complain if it encounters
146     .br or .in.
147 ph10 111
148 ph10 100 4. Updated comments in configure.ac that get placed in config.h.in and also
149 ph10 123 arranged for config.h to be included in the distribution, with the name
150 ph10 111 config.h.generic, for the benefit of those who have to compile without
151     Autotools (compare pcre.h, which is now distributed as pcre.h.generic).
152    
153     5. Updated the support (such as it is) for Virtual Pascal, thanks to Stefan
154     Weber: (1) pcre_internal.h was missing some function renames; (2) updated
155 ph10 127 makevp.bat for the current PCRE, using the additional files
156 ph10 135 makevp_c.txt, makevp_l.txt, and pcregexp.pas.
157 ph10 111
158     6. A Windows user reported a minor discrepancy with test 2, which turned out
159     to be caused by a trailing space on an input line that had got lost in his
160 ph10 102 copy. The trailing space was an accident, so I've just removed it.
161 ph10 111
162 ph10 104 7. Add -Wl,-R... flags in pcre-config.in for *BSD* systems, as I'm told
163 ph10 111 that is needed.
164    
165 ph10 105 8. Mark ucp_table (in ucptable.h) and ucp_gentype (in pcre_ucp_searchfuncs.c)
166     as "const" (a) because they are and (b) because it helps the PHP
167     maintainers who have recently made a script to detect big data structures
168 ph10 111 in the php code that should be moved to the .rodata section. I remembered
169     to update Builducptable as well, so it won't revert if ucptable.h is ever
170 ph10 105 re-created.
171 ph10 111
172     9. Added some extra #ifdef SUPPORT_UTF8 conditionals into pcretest.c,
173 ph10 107 pcre_printint.src, pcre_compile.c, pcre_study.c, and pcre_tables.c, in
174 ph10 111 order to be able to cut out the UTF-8 tables in the latter when UTF-8
175     support is not required. This saves 1.5-2K of code, which is important in
176 ph10 107 some applications.
177 ph10 111
178 ph10 110 Later: more #ifdefs are needed in pcre_ord2utf8.c and pcre_valid_utf8.c
179 ph10 111 so as not to refer to the tables, even though these functions will never be
180     called when UTF-8 support is disabled. Otherwise there are problems with a
181     shared library.
182    
183 ph10 118 10. Fixed two bugs in the emulated memmove() function in pcre_internal.h:
184    
185     (a) It was defining its arguments as char * instead of void *.
186    
187 ph10 123 (b) It was assuming that all moves were upwards in memory; this was true
188     a long time ago when I wrote it, but is no longer the case.
189    
190 ph10 118 The emulated memove() is provided for those environments that have neither
191 ph10 123 memmove() nor bcopy(). I didn't think anyone used it these days, but that
192 ph10 118 is clearly not the case, as these two bugs were recently reported.
193 ph10 123
194 ph10 111 11. The script PrepareRelease is now distributed: it calls 132html, CleanTxt,
195 ph10 123 and Detrail to create the HTML documentation, the .txt form of the man
196     pages, and it removes trailing spaces from listed files. It also creates
197     pcre.h.generic and config.h.generic from pcre.h and config.h. In the latter
198     case, it wraps all the #defines with #ifndefs. This script should be run
199 ph10 111 before "make dist".
200 ph10 123
201 ph10 115 12. Fixed two fairly obscure bugs concerned with quantified caseless matching
202     with Unicode property support.
203 ph10 123
204     (a) For a maximizing quantifier, if the two different cases of the
205     character were of different lengths in their UTF-8 codings (there are
206     some cases like this - I found 11), and the matching function had to
207 ph10 115 back up over a mixture of the two cases, it incorrectly assumed they
208     were both the same length.
209 ph10 123
210     (b) When PCRE was configured to use the heap rather than the stack for
211     recursion during matching, it was not correctly preserving the data for
212     the other case of a UTF-8 character when checking ahead for a match
213     while processing a minimizing repeat. If the check also involved
214 ph10 115 matching a wide character, but failed, corruption could cause an
215     erroneous result when trying to check for a repeat of the original
216     character.
217 ph10 123
218 ph10 116 13. Some tidying changes to the testing mechanism:
219 ph10 98
220 ph10 116 (a) The RunTest script now detects the internal link size and whether there
221     is UTF-8 and UCP support by running ./pcretest -C instead of relying on
222 ph10 123 values substituted by "configure". (The RunGrepTest script already did
223     this for UTF-8.) The configure.ac script no longer substitutes the
224     relevant variables.
225    
226 ph10 116 (b) The debugging options /B and /D in pcretest show the compiled bytecode
227     with length and offset values. This means that the output is different
228     for different internal link sizes. Test 2 is skipped for link sizes
229     other than 2 because of this, bypassing the problem. Unfortunately,
230     there was also a test in test 3 (the locale tests) that used /B and
231 ph10 123 failed for link sizes other than 2. Rather than cut the whole test out,
232     I have added a new /Z option to pcretest that replaces the length and
233     offset values with spaces. This is now used to make test 3 independent
234 ph10 122 of link size. (Test 2 will be tidied up later.)
235 ph10 123
236     14. If erroroffset was passed as NULL to pcre_compile, it provoked a
237 ph10 122 segmentation fault instead of returning the appropriate error message.
238 ph10 134
239 ph10 131 15. In multiline mode when the newline sequence was set to "any", the pattern
240 ph10 134 ^$ would give a match between the \r and \n of a subject such as "A\r\nB".
241     This doesn't seem right; it now treats the CRLF combination as the line
242     ending, and so does not match in that case. It's only a pattern such as ^$
243     that would hit this one: something like ^ABC$ would have failed after \r
244     and then tried again after \r\n.
245    
246 ph10 131 16. Changed the comparison command for RunGrepTest from "diff -u" to "diff -ub"
247 ph10 134 in an attempt to make files that differ only in their line terminators
248     compare equal. This works on Linux.
249 ph10 142
250 ph10 141 17. Under certain error circumstances pcregrep might try to free random memory
251     as it exited. This is now fixed, thanks to valgrind.
252 ph10 142
253 ph10 141 19. In pcretest, if the pattern /(?m)^$/g<any> was matched against the string
254 ph10 142 "abc\r\n\r\n", it found an unwanted second match after the second \r. This
255     was because its rules for how to advance for /g after matching an empty
256 ph10 143 string at the end of a line did not allow for this case. They now check for
257     it specially.
258 ph10 150
259     20. pcretest is supposed to handle patterns and data of any length, by
260     extending its buffers when necessary. It was getting this wrong when the
261 ph10 147 buffer for a data line had to be extended.
262 ph10 150
263 ph10 149 21. Added PCRE_NEWLINE_ANYCRLF which is like ANY, but matches only CR, LF, or
264 ph10 150 CRLF as a newline sequence.
265 ph10 152
266 ph10 151 22. Code for handling Unicode properties in pcre_dfa_exec() wasn't being cut
267 ph10 152 out by #ifdef SUPPORT_UCP. This did no harm, as it could never be used, but
268     I have nevertheless tidied it up.
269 ph10 111
270 ph10 152 23. Added some casts to kill warnings from HP-UX ia64 compiler.
271 ph10 123
272 ph10 153 24. Added a man page for pcre-config.
273 ph10 152
274 ph10 153
275 nigel 93 Version 7.0 19-Dec-06
276     ---------------------
277    
278     1. Fixed a signed/unsigned compiler warning in pcre_compile.c, shown up by
279     moving to gcc 4.1.1.
280    
281     2. The -S option for pcretest uses setrlimit(); I had omitted to #include
282     sys/time.h, which is documented as needed for this function. It doesn't
283     seem to matter on Linux, but it showed up on some releases of OS X.
284    
285     3. It seems that there are systems where bytes whose values are greater than
286     127 match isprint() in the "C" locale. The "C" locale should be the
287     default when a C program starts up. In most systems, only ASCII printing
288     characters match isprint(). This difference caused the output from pcretest
289     to vary, making some of the tests fail. I have changed pcretest so that:
290    
291     (a) When it is outputting text in the compiled version of a pattern, bytes
292     other than 32-126 are always shown as hex escapes.
293    
294     (b) When it is outputting text that is a matched part of a subject string,
295     it does the same, unless a different locale has been set for the match
296     (using the /L modifier). In this case, it uses isprint() to decide.
297    
298     4. Fixed a major bug that caused incorrect computation of the amount of memory
299     required for a compiled pattern when options that changed within the
300     pattern affected the logic of the preliminary scan that determines the
301     length. The relevant options are -x, and -i in UTF-8 mode. The result was
302     that the computed length was too small. The symptoms of this bug were
303     either the PCRE error "internal error: code overflow" from pcre_compile(),
304     or a glibc crash with a message such as "pcretest: free(): invalid next
305     size (fast)". Examples of patterns that provoked this bug (shown in
306     pcretest format) are:
307    
308     /(?-x: )/x
309     /(?x)(?-x: \s*#\s*)/
310     /((?i)[\x{c0}])/8
311     /(?i:[\x{c0}])/8
312    
313     HOWEVER: Change 17 below makes this fix obsolete as the memory computation
314     is now done differently.
315    
316     5. Applied patches from Google to: (a) add a QuoteMeta function to the C++
317     wrapper classes; (b) implement a new function in the C++ scanner that is
318     more efficient than the old way of doing things because it avoids levels of
319     recursion in the regex matching; (c) add a paragraph to the documentation
320     for the FullMatch() function.
321    
322     6. The escape sequence \n was being treated as whatever was defined as
323     "newline". Not only was this contrary to the documentation, which states
324     that \n is character 10 (hex 0A), but it also went horribly wrong when
325     "newline" was defined as CRLF. This has been fixed.
326    
327     7. In pcre_dfa_exec.c the value of an unsigned integer (the variable called c)
328     was being set to -1 for the "end of line" case (supposedly a value that no
329     character can have). Though this value is never used (the check for end of
330     line is "zero bytes in current character"), it caused compiler complaints.
331     I've changed it to 0xffffffff.
332    
333     8. In pcre_version.c, the version string was being built by a sequence of
334     C macros that, in the event of PCRE_PRERELEASE being defined as an empty
335     string (as it is for production releases) called a macro with an empty
336     argument. The C standard says the result of this is undefined. The gcc
337     compiler treats it as an empty string (which was what was wanted) but it is
338     reported that Visual C gives an error. The source has been hacked around to
339     avoid this problem.
340    
341     9. On the advice of a Windows user, included <io.h> and <fcntl.h> in Windows
342     builds of pcretest, and changed the call to _setmode() to use _O_BINARY
343     instead of 0x8000. Made all the #ifdefs test both _WIN32 and WIN32 (not all
344     of them did).
345    
346     10. Originally, pcretest opened its input and output without "b"; then I was
347     told that "b" was needed in some environments, so it was added for release
348     5.0 to both the input and output. (It makes no difference on Unix-like
349     systems.) Later I was told that it is wrong for the input on Windows. I've
350     now abstracted the modes into two macros, to make it easier to fiddle with
351     them, and removed "b" from the input mode under Windows.
352    
353     11. Added pkgconfig support for the C++ wrapper library, libpcrecpp.
354    
355     12. Added -help and --help to pcretest as an official way of being reminded
356     of the options.
357    
358     13. Removed some redundant semicolons after macro calls in pcrecpparg.h.in
359     and pcrecpp.cc because they annoy compilers at high warning levels.
360    
361     14. A bit of tidying/refactoring in pcre_exec.c in the main bumpalong loop.
362    
363     15. Fixed an occurrence of == in configure.ac that should have been = (shell
364     scripts are not C programs :-) and which was not noticed because it works
365     on Linux.
366    
367     16. pcretest is supposed to handle any length of pattern and data line (as one
368     line or as a continued sequence of lines) by extending its input buffer if
369     necessary. This feature was broken for very long pattern lines, leading to
370     a string of junk being passed to pcre_compile() if the pattern was longer
371     than about 50K.
372    
373     17. I have done a major re-factoring of the way pcre_compile() computes the
374     amount of memory needed for a compiled pattern. Previously, there was code
375     that made a preliminary scan of the pattern in order to do this. That was
376     OK when PCRE was new, but as the facilities have expanded, it has become
377     harder and harder to keep it in step with the real compile phase, and there
378     have been a number of bugs (see for example, 4 above). I have now found a
379     cunning way of running the real compile function in a "fake" mode that
380     enables it to compute how much memory it would need, while actually only
381     ever using a few hundred bytes of working memory and without too many
382     tests of the mode. This should make future maintenance and development
383     easier. A side effect of this work is that the limit of 200 on the nesting
384     depth of parentheses has been removed (though this was never a serious
385     limitation, I suspect). However, there is a downside: pcre_compile() now
386     runs more slowly than before (30% or more, depending on the pattern). I
387     hope this isn't a big issue. There is no effect on runtime performance.
388    
389     18. Fixed a minor bug in pcretest: if a pattern line was not terminated by a
390     newline (only possible for the last line of a file) and it was a
391     pattern that set a locale (followed by /Lsomething), pcretest crashed.
392    
393     19. Added additional timing features to pcretest. (1) The -tm option now times
394     matching only, not compiling. (2) Both -t and -tm can be followed, as a
395     separate command line item, by a number that specifies the number of
396     repeats to use when timing. The default is 50000; this gives better
397     precision, but takes uncomfortably long for very large patterns.
398    
399     20. Extended pcre_study() to be more clever in cases where a branch of a
400     subpattern has no definite first character. For example, (a*|b*)[cd] would
401     previously give no result from pcre_study(). Now it recognizes that the
402     first character must be a, b, c, or d.
403    
404     21. There was an incorrect error "recursive call could loop indefinitely" if
405     a subpattern (or the entire pattern) that was being tested for matching an
406     empty string contained only one non-empty item after a nested subpattern.
407     For example, the pattern (?>\x{100}*)\d(?R) provoked this error
408     incorrectly, because the \d was being skipped in the check.
409    
410     22. The pcretest program now has a new pattern option /B and a command line
411     option -b, which is equivalent to adding /B to every pattern. This causes
412     it to show the compiled bytecode, without the additional information that
413     -d shows. The effect of -d is now the same as -b with -i (and similarly, /D
414     is the same as /B/I).
415    
416     23. A new optimization is now able automatically to treat some sequences such
417     as a*b as a*+b. More specifically, if something simple (such as a character
418     or a simple class like \d) has an unlimited quantifier, and is followed by
419     something that cannot possibly match the quantified thing, the quantifier
420     is automatically "possessified".
421    
422     24. A recursive reference to a subpattern whose number was greater than 39
423     went wrong under certain circumstances in UTF-8 mode. This bug could also
424     have affected the operation of pcre_study().
425    
426     25. Realized that a little bit of performance could be had by replacing
427     (c & 0xc0) == 0xc0 with c >= 0xc0 when processing UTF-8 characters.
428    
429     26. Timing data from pcretest is now shown to 4 decimal places instead of 3.
430    
431     27. Possessive quantifiers such as a++ were previously implemented by turning
432     them into atomic groups such as ($>a+). Now they have their own opcodes,
433     which improves performance. This includes the automatically created ones
434     from 23 above.
435    
436     28. A pattern such as (?=(\w+))\1: which simulates an atomic group using a
437     lookahead was broken if it was not anchored. PCRE was mistakenly expecting
438     the first matched character to be a colon. This applied both to named and
439     numbered groups.
440    
441     29. The ucpinternal.h header file was missing its idempotency #ifdef.
442    
443     30. I was sent a "project" file called libpcre.a.dev which I understand makes
444     building PCRE on Windows easier, so I have included it in the distribution.
445    
446     31. There is now a check in pcretest against a ridiculously large number being
447     returned by pcre_exec() or pcre_dfa_exec(). If this happens in a /g or /G
448     loop, the loop is abandoned.
449    
450     32. Forward references to subpatterns in conditions such as (?(2)...) where
451     subpattern 2 is defined later cause pcre_compile() to search forwards in
452     the pattern for the relevant set of parentheses. This search went wrong
453     when there were unescaped parentheses in a character class, parentheses
454     escaped with \Q...\E, or parentheses in a #-comment in /x mode.
455    
456     33. "Subroutine" calls and backreferences were previously restricted to
457     referencing subpatterns earlier in the regex. This restriction has now
458     been removed.
459    
460     34. Added a number of extra features that are going to be in Perl 5.10. On the
461     whole, these are just syntactic alternatives for features that PCRE had
462     previously implemented using the Python syntax or my own invention. The
463     other formats are all retained for compatibility.
464    
465     (a) Named groups can now be defined as (?<name>...) or (?'name'...) as well
466     as (?P<name>...). The new forms, as well as being in Perl 5.10, are
467     also .NET compatible.
468    
469     (b) A recursion or subroutine call to a named group can now be defined as
470     (?&name) as well as (?P>name).
471    
472     (c) A backreference to a named group can now be defined as \k<name> or
473     \k'name' as well as (?P=name). The new forms, as well as being in Perl
474     5.10, are also .NET compatible.
475    
476     (d) A conditional reference to a named group can now use the syntax
477     (?(<name>) or (?('name') as well as (?(name).
478    
479     (e) A "conditional group" of the form (?(DEFINE)...) can be used to define
480     groups (named and numbered) that are never evaluated inline, but can be
481     called as "subroutines" from elsewhere. In effect, the DEFINE condition
482     is always false. There may be only one alternative in such a group.
483    
484     (f) A test for recursion can be given as (?(R1).. or (?(R&name)... as well
485     as the simple (?(R). The condition is true only if the most recent
486     recursion is that of the given number or name. It does not search out
487     through the entire recursion stack.
488    
489     (g) The escape \gN or \g{N} has been added, where N is a positive or
490     negative number, specifying an absolute or relative reference.
491    
492     35. Tidied to get rid of some further signed/unsigned compiler warnings and
493     some "unreachable code" warnings.
494    
495     36. Updated the Unicode property tables to Unicode version 5.0.0. Amongst other
496     things, this adds five new scripts.
497    
498     37. Perl ignores orphaned \E escapes completely. PCRE now does the same.
499     There were also incompatibilities regarding the handling of \Q..\E inside
500     character classes, for example with patterns like [\Qa\E-\Qz\E] where the
501     hyphen was adjacent to \Q or \E. I hope I've cleared all this up now.
502    
503     38. Like Perl, PCRE detects when an indefinitely repeated parenthesized group
504     matches an empty string, and forcibly breaks the loop. There were bugs in
505     this code in non-simple cases. For a pattern such as ^(a()*)* matched
506     against aaaa the result was just "a" rather than "aaaa", for example. Two
507     separate and independent bugs (that affected different cases) have been
508     fixed.
509    
510     39. Refactored the code to abolish the use of different opcodes for small
511     capturing bracket numbers. This is a tidy that I avoided doing when I
512     removed the limit on the number of capturing brackets for 3.5 back in 2001.
513     The new approach is not only tidier, it makes it possible to reduce the
514     memory needed to fix the previous bug (38).
515    
516     40. Implemented PCRE_NEWLINE_ANY to recognize any of the Unicode newline
517     sequences (http://unicode.org/unicode/reports/tr18/) as "newline" when
518     processing dot, circumflex, or dollar metacharacters, or #-comments in /x
519     mode.
520    
521     41. Add \R to match any Unicode newline sequence, as suggested in the Unicode
522     report.
523    
524     42. Applied patch, originally from Ari Pollak, modified by Google, to allow
525     copy construction and assignment in the C++ wrapper.
526    
527     43. Updated pcregrep to support "--newline=any". In the process, I fixed a
528     couple of bugs that could have given wrong results in the "--newline=crlf"
529     case.
530    
531     44. Added a number of casts and did some reorganization of signed/unsigned int
532     variables following suggestions from Dair Grant. Also renamed the variable
533     "this" as "item" because it is a C++ keyword.
534    
535     45. Arranged for dftables to add
536    
537     #include "pcre_internal.h"
538    
539     to pcre_chartables.c because without it, gcc 4.x may remove the array
540     definition from the final binary if PCRE is built into a static library and
541     dead code stripping is activated.
542    
543     46. For an unanchored pattern, if a match attempt fails at the start of a
544     newline sequence, and the newline setting is CRLF or ANY, and the next two
545     characters are CRLF, advance by two characters instead of one.
546    
547    
548 nigel 91 Version 6.7 04-Jul-06
549     ---------------------
550    
551     1. In order to handle tests when input lines are enormously long, pcretest has
552     been re-factored so that it automatically extends its buffers when
553     necessary. The code is crude, but this _is_ just a test program. The
554     default size has been increased from 32K to 50K.
555    
556     2. The code in pcre_study() was using the value of the re argument before
557     testing it for NULL. (Of course, in any sensible call of the function, it
558     won't be NULL.)
559    
560     3. The memmove() emulation function in pcre_internal.h, which is used on
561     systems that lack both memmove() and bcopy() - that is, hardly ever -
562     was missing a "static" storage class specifier.
563    
564     4. When UTF-8 mode was not set, PCRE looped when compiling certain patterns
565     containing an extended class (one that cannot be represented by a bitmap
566     because it contains high-valued characters or Unicode property items, e.g.
567     [\pZ]). Almost always one would set UTF-8 mode when processing such a
568     pattern, but PCRE should not loop if you do not (it no longer does).
569     [Detail: two cases were found: (a) a repeated subpattern containing an
570     extended class; (b) a recursive reference to a subpattern that followed a
571     previous extended class. It wasn't skipping over the extended class
572     correctly when UTF-8 mode was not set.]
573    
574     5. A negated single-character class was not being recognized as fixed-length
575     in lookbehind assertions such as (?<=[^f]), leading to an incorrect
576     compile error "lookbehind assertion is not fixed length".
577    
578     6. The RunPerlTest auxiliary script was showing an unexpected difference
579     between PCRE and Perl for UTF-8 tests. It turns out that it is hard to
580     write a Perl script that can interpret lines of an input file either as
581     byte characters or as UTF-8, which is what "perltest" was being required to
582     do for the non-UTF-8 and UTF-8 tests, respectively. Essentially what you
583     can't do is switch easily at run time between having the "use utf8;" pragma
584     or not. In the end, I fudged it by using the RunPerlTest script to insert
585     "use utf8;" explicitly for the UTF-8 tests.
586    
587     7. In multiline (/m) mode, PCRE was matching ^ after a terminating newline at
588     the end of the subject string, contrary to the documentation and to what
589     Perl does. This was true of both matching functions. Now it matches only at
590     the start of the subject and immediately after *internal* newlines.
591    
592     8. A call of pcre_fullinfo() from pcretest to get the option bits was passing
593     a pointer to an int instead of a pointer to an unsigned long int. This
594     caused problems on 64-bit systems.
595    
596     9. Applied a patch from the folks at Google to pcrecpp.cc, to fix "another
597     instance of the 'standard' template library not being so standard".
598    
599     10. There was no check on the number of named subpatterns nor the maximum
600     length of a subpattern name. The product of these values is used to compute
601     the size of the memory block for a compiled pattern. By supplying a very
602     long subpattern name and a large number of named subpatterns, the size
603     computation could be caused to overflow. This is now prevented by limiting
604     the length of names to 32 characters, and the number of named subpatterns
605     to 10,000.
606    
607     11. Subpatterns that are repeated with specific counts have to be replicated in
608     the compiled pattern. The size of memory for this was computed from the
609     length of the subpattern and the repeat count. The latter is limited to
610     65535, but there was no limit on the former, meaning that integer overflow
611     could in principle occur. The compiled length of a repeated subpattern is
612     now limited to 30,000 bytes in order to prevent this.
613    
614     12. Added the optional facility to have named substrings with the same name.
615    
616     13. Added the ability to use a named substring as a condition, using the
617     Python syntax: (?(name)yes|no). This overloads (?(R)... and names that
618     are numbers (not recommended). Forward references are permitted.
619    
620     14. Added forward references in named backreferences (if you see what I mean).
621    
622     15. In UTF-8 mode, with the PCRE_DOTALL option set, a quantified dot in the
623     pattern could run off the end of the subject. For example, the pattern
624     "(?s)(.{1,5})"8 did this with the subject "ab".
625    
626     16. If PCRE_DOTALL or PCRE_MULTILINE were set, pcre_dfa_exec() behaved as if
627     PCRE_CASELESS was set when matching characters that were quantified with ?
628     or *.
629    
630     17. A character class other than a single negated character that had a minimum
631     but no maximum quantifier - for example [ab]{6,} - was not handled
632     correctly by pce_dfa_exec(). It would match only one character.
633    
634     18. A valid (though odd) pattern that looked like a POSIX character
635     class but used an invalid character after [ (for example [[,abc,]]) caused
636     pcre_compile() to give the error "Failed: internal error: code overflow" or
637     in some cases to crash with a glibc free() error. This could even happen if
638     the pattern terminated after [[ but there just happened to be a sequence of
639     letters, a binary zero, and a closing ] in the memory that followed.
640    
641     19. Perl's treatment of octal escapes in the range \400 to \777 has changed
642     over the years. Originally (before any Unicode support), just the bottom 8
643     bits were taken. Thus, for example, \500 really meant \100. Nowadays the
644     output from "man perlunicode" includes this:
645    
646     The regular expression compiler produces polymorphic opcodes. That
647     is, the pattern adapts to the data and automatically switches to
648     the Unicode character scheme when presented with Unicode data--or
649     instead uses a traditional byte scheme when presented with byte
650     data.
651    
652     Sadly, a wide octal escape does not cause a switch, and in a string with
653     no other multibyte characters, these octal escapes are treated as before.
654     Thus, in Perl, the pattern /\500/ actually matches \100 but the pattern
655     /\500|\x{1ff}/ matches \500 or \777 because the whole thing is treated as a
656     Unicode string.
657    
658     I have not perpetrated such confusion in PCRE. Up till now, it took just
659     the bottom 8 bits, as in old Perl. I have now made octal escapes with
660     values greater than \377 illegal in non-UTF-8 mode. In UTF-8 mode they
661     translate to the appropriate multibyte character.
662    
663     29. Applied some refactoring to reduce the number of warnings from Microsoft
664     and Borland compilers. This has included removing the fudge introduced
665     seven years ago for the OS/2 compiler (see 2.02/2 below) because it caused
666     a warning about an unused variable.
667    
668     21. PCRE has not included VT (character 0x0b) in the set of whitespace
669     characters since release 4.0, because Perl (from release 5.004) does not.
670     [Or at least, is documented not to: some releases seem to be in conflict
671     with the documentation.] However, when a pattern was studied with
672     pcre_study() and all its branches started with \s, PCRE still included VT
673     as a possible starting character. Of course, this did no harm; it just
674     caused an unnecessary match attempt.
675    
676     22. Removed a now-redundant internal flag bit that recorded the fact that case
677     dependency changed within the pattern. This was once needed for "required
678     byte" processing, but is no longer used. This recovers a now-scarce options
679     bit. Also moved the least significant internal flag bit to the most-
680     significant bit of the word, which was not previously used (hangover from
681     the days when it was an int rather than a uint) to free up another bit for
682     the future.
683    
684     23. Added support for CRLF line endings as well as CR and LF. As well as the
685     default being selectable at build time, it can now be changed at runtime
686     via the PCRE_NEWLINE_xxx flags. There are now options for pcregrep to
687     specify that it is scanning data with non-default line endings.
688    
689     24. Changed the definition of CXXLINK to make it agree with the definition of
690     LINK in the Makefile, by replacing LDFLAGS to CXXFLAGS.
691    
692     25. Applied Ian Taylor's patches to avoid using another stack frame for tail
693     recursions. This makes a big different to stack usage for some patterns.
694    
695     26. If a subpattern containing a named recursion or subroutine reference such
696     as (?P>B) was quantified, for example (xxx(?P>B)){3}, the calculation of
697     the space required for the compiled pattern went wrong and gave too small a
698     value. Depending on the environment, this could lead to "Failed: internal
699     error: code overflow at offset 49" or "glibc detected double free or
700     corruption" errors.
701    
702     27. Applied patches from Google (a) to support the new newline modes and (b) to
703     advance over multibyte UTF-8 characters in GlobalReplace.
704    
705     28. Change free() to pcre_free() in pcredemo.c. Apparently this makes a
706     difference for some implementation of PCRE in some Windows version.
707    
708     29. Added some extra testing facilities to pcretest:
709    
710     \q<number> in a data line sets the "match limit" value
711     \Q<number> in a data line sets the "match recursion limt" value
712     -S <number> sets the stack size, where <number> is in megabytes
713    
714     The -S option isn't available for Windows.
715    
716    
717 nigel 89 Version 6.6 06-Feb-06
718     ---------------------
719    
720     1. Change 16(a) for 6.5 broke things, because PCRE_DATA_SCOPE was not defined
721     in pcreposix.h. I have copied the definition from pcre.h.
722    
723     2. Change 25 for 6.5 broke compilation in a build directory out-of-tree
724     because pcre.h is no longer a built file.
725    
726     3. Added Jeff Friedl's additional debugging patches to pcregrep. These are
727     not normally included in the compiled code.
728    
729    
730 nigel 87 Version 6.5 01-Feb-06
731     ---------------------
732    
733     1. When using the partial match feature with pcre_dfa_exec(), it was not
734     anchoring the second and subsequent partial matches at the new starting
735     point. This could lead to incorrect results. For example, with the pattern
736     /1234/, partially matching against "123" and then "a4" gave a match.
737    
738     2. Changes to pcregrep:
739    
740     (a) All non-match returns from pcre_exec() were being treated as failures
741     to match the line. Now, unless the error is PCRE_ERROR_NOMATCH, an
742     error message is output. Some extra information is given for the
743     PCRE_ERROR_MATCHLIMIT and PCRE_ERROR_RECURSIONLIMIT errors, which are
744     probably the only errors that are likely to be caused by users (by
745     specifying a regex that has nested indefinite repeats, for instance).
746     If there are more than 20 of these errors, pcregrep is abandoned.
747    
748     (b) A binary zero was treated as data while matching, but terminated the
749     output line if it was written out. This has been fixed: binary zeroes
750     are now no different to any other data bytes.
751    
752     (c) Whichever of the LC_ALL or LC_CTYPE environment variables is set is
753     used to set a locale for matching. The --locale=xxxx long option has
754     been added (no short equivalent) to specify a locale explicitly on the
755     pcregrep command, overriding the environment variables.
756    
757     (d) When -B was used with -n, some line numbers in the output were one less
758     than they should have been.
759    
760     (e) Added the -o (--only-matching) option.
761    
762     (f) If -A or -C was used with -c (count only), some lines of context were
763     accidentally printed for the final match.
764    
765     (g) Added the -H (--with-filename) option.
766    
767     (h) The combination of options -rh failed to suppress file names for files
768     that were found from directory arguments.
769    
770     (i) Added the -D (--devices) and -d (--directories) options.
771    
772     (j) Added the -F (--fixed-strings) option.
773    
774     (k) Allow "-" to be used as a file name for -f as well as for a data file.
775    
776     (l) Added the --colo(u)r option.
777    
778     (m) Added Jeffrey Friedl's -S testing option, but within #ifdefs so that it
779     is not present by default.
780    
781     3. A nasty bug was discovered in the handling of recursive patterns, that is,
782     items such as (?R) or (?1), when the recursion could match a number of
783     alternatives. If it matched one of the alternatives, but subsequently,
784     outside the recursion, there was a failure, the code tried to back up into
785     the recursion. However, because of the way PCRE is implemented, this is not
786     possible, and the result was an incorrect result from the match.
787    
788     In order to prevent this happening, the specification of recursion has
789     been changed so that all such subpatterns are automatically treated as
790     atomic groups. Thus, for example, (?R) is treated as if it were (?>(?R)).
791    
792     4. I had overlooked the fact that, in some locales, there are characters for
793     which isalpha() is true but neither isupper() nor islower() are true. In
794     the fr_FR locale, for instance, the \xAA and \xBA characters (ordmasculine
795     and ordfeminine) are like this. This affected the treatment of \w and \W
796     when they appeared in character classes, but not when they appeared outside
797     a character class. The bit map for "word" characters is now created
798     separately from the results of isalnum() instead of just taking it from the
799     upper, lower, and digit maps. (Plus the underscore character, of course.)
800    
801     5. The above bug also affected the handling of POSIX character classes such as
802     [[:alpha:]] and [[:alnum:]]. These do not have their own bit maps in PCRE's
803     permanent tables. Instead, the bit maps for such a class were previously
804     created as the appropriate unions of the upper, lower, and digit bitmaps.
805     Now they are created by subtraction from the [[:word:]] class, which has
806     its own bitmap.
807    
808     6. The [[:blank:]] character class matches horizontal, but not vertical space.
809     It is created by subtracting the vertical space characters (\x09, \x0a,
810     \x0b, \x0c) from the [[:space:]] bitmap. Previously, however, the
811     subtraction was done in the overall bitmap for a character class, meaning
812     that a class such as [\x0c[:blank:]] was incorrect because \x0c would not
813     be recognized. This bug has been fixed.
814    
815     7. Patches from the folks at Google:
816    
817     (a) pcrecpp.cc: "to handle a corner case that may or may not happen in
818     real life, but is still worth protecting against".
819    
820     (b) pcrecpp.cc: "corrects a bug when negative radixes are used with
821     regular expressions".
822    
823     (c) pcre_scanner.cc: avoid use of std::count() because not all systems
824     have it.
825    
826     (d) Split off pcrecpparg.h from pcrecpp.h and had the former built by
827     "configure" and the latter not, in order to fix a problem somebody had
828     with compiling the Arg class on HP-UX.
829    
830     (e) Improve the error-handling of the C++ wrapper a little bit.
831    
832     (f) New tests for checking recursion limiting.
833    
834     8. The pcre_memmove() function, which is used only if the environment does not
835     have a standard memmove() function (and is therefore rarely compiled),
836     contained two bugs: (a) use of int instead of size_t, and (b) it was not
837     returning a result (though PCRE never actually uses the result).
838    
839     9. In the POSIX regexec() interface, if nmatch is specified as a ridiculously
840     large number - greater than INT_MAX/(3*sizeof(int)) - REG_ESPACE is
841     returned instead of calling malloc() with an overflowing number that would
842     most likely cause subsequent chaos.
843    
844     10. The debugging option of pcretest was not showing the NO_AUTO_CAPTURE flag.
845    
846     11. The POSIX flag REG_NOSUB is now supported. When a pattern that was compiled
847     with this option is matched, the nmatch and pmatch options of regexec() are
848     ignored.
849    
850     12. Added REG_UTF8 to the POSIX interface. This is not defined by POSIX, but is
851     provided in case anyone wants to the the POSIX interface with UTF-8
852     strings.
853    
854     13. Added CXXLDFLAGS to the Makefile parameters to provide settings only on the
855     C++ linking (needed for some HP-UX environments).
856    
857     14. Avoid compiler warnings in get_ucpname() when compiled without UCP support
858     (unused parameter) and in the pcre_printint() function (omitted "default"
859     switch label when the default is to do nothing).
860    
861     15. Added some code to make it possible, when PCRE is compiled as a C++
862     library, to replace subject pointers for pcre_exec() with a smart pointer
863     class, thus making it possible to process discontinuous strings.
864    
865     16. The two macros PCRE_EXPORT and PCRE_DATA_SCOPE are confusing, and perform
866     much the same function. They were added by different people who were trying
867     to make PCRE easy to compile on non-Unix systems. It has been suggested
868     that PCRE_EXPORT be abolished now that there is more automatic apparatus
869     for compiling on Windows systems. I have therefore replaced it with
870     PCRE_DATA_SCOPE. This is set automatically for Windows; if not set it
871     defaults to "extern" for C or "extern C" for C++, which works fine on
872     Unix-like systems. It is now possible to override the value of PCRE_DATA_
873     SCOPE with something explicit in config.h. In addition:
874    
875     (a) pcreposix.h still had just "extern" instead of either of these macros;
876     I have replaced it with PCRE_DATA_SCOPE.
877    
878     (b) Functions such as _pcre_xclass(), which are internal to the library,
879     but external in the C sense, all had PCRE_EXPORT in their definitions.
880     This is apparently wrong for the Windows case, so I have removed it.
881     (It makes no difference on Unix-like systems.)
882    
883     17. Added a new limit, MATCH_LIMIT_RECURSION, which limits the depth of nesting
884     of recursive calls to match(). This is different to MATCH_LIMIT because
885     that limits the total number of calls to match(), not all of which increase
886     the depth of recursion. Limiting the recursion depth limits the amount of
887     stack (or heap if NO_RECURSE is set) that is used. The default can be set
888     when PCRE is compiled, and changed at run time. A patch from Google adds
889     this functionality to the C++ interface.
890    
891     18. Changes to the handling of Unicode character properties:
892    
893     (a) Updated the table to Unicode 4.1.0.
894    
895     (b) Recognize characters that are not in the table as "Cn" (undefined).
896    
897     (c) I revised the way the table is implemented to a much improved format
898     which includes recognition of ranges. It now supports the ranges that
899     are defined in UnicodeData.txt, and it also amalgamates other
900     characters into ranges. This has reduced the number of entries in the
901     table from around 16,000 to around 3,000, thus reducing its size
902     considerably. I realized I did not need to use a tree structure after
903     all - a binary chop search is just as efficient. Having reduced the
904     number of entries, I extended their size from 6 bytes to 8 bytes to
905     allow for more data.
906    
907     (d) Added support for Unicode script names via properties such as \p{Han}.
908    
909     19. In UTF-8 mode, a backslash followed by a non-Ascii character was not
910     matching that character.
911    
912     20. When matching a repeated Unicode property with a minimum greater than zero,
913     (for example \pL{2,}), PCRE could look past the end of the subject if it
914     reached it while seeking the minimum number of characters. This could
915     happen only if some of the characters were more than one byte long, because
916     there is a check for at least the minimum number of bytes.
917    
918     21. Refactored the implementation of \p and \P so as to be more general, to
919     allow for more different types of property in future. This has changed the
920     compiled form incompatibly. Anybody with saved compiled patterns that use
921     \p or \P will have to recompile them.
922    
923     22. Added "Any" and "L&" to the supported property types.
924    
925     23. Recognize \x{...} as a code point specifier, even when not in UTF-8 mode,
926     but give a compile time error if the value is greater than 0xff.
927    
928     24. The man pages for pcrepartial, pcreprecompile, and pcre_compile2 were
929     accidentally not being installed or uninstalled.
930    
931     25. The pcre.h file was built from pcre.h.in, but the only changes that were
932     made were to insert the current release number. This seemed silly, because
933     it made things harder for people building PCRE on systems that don't run
934     "configure". I have turned pcre.h into a distributed file, no longer built
935     by "configure", with the version identification directly included. There is
936     no longer a pcre.h.in file.
937    
938     However, this change necessitated a change to the pcre-config script as
939     well. It is built from pcre-config.in, and one of the substitutions was the
940     release number. I have updated configure.ac so that ./configure now finds
941     the release number by grepping pcre.h.
942    
943     26. Added the ability to run the tests under valgrind.
944    
945    
946 nigel 85 Version 6.4 05-Sep-05
947     ---------------------
948    
949     1. Change 6.0/10/(l) to pcregrep introduced a bug that caused separator lines
950     "--" to be printed when multiple files were scanned, even when none of the
951     -A, -B, or -C options were used. This is not compatible with Gnu grep, so I
952     consider it to be a bug, and have restored the previous behaviour.
953    
954     2. A couple of code tidies to get rid of compiler warnings.
955    
956     3. The pcretest program used to cheat by referring to symbols in the library
957     whose names begin with _pcre_. These are internal symbols that are not
958     really supposed to be visible externally, and in some environments it is
959     possible to suppress them. The cheating is now confined to including
960     certain files from the library's source, which is a bit cleaner.
961    
962     4. Renamed pcre.in as pcre.h.in to go with pcrecpp.h.in; it also makes the
963     file's purpose clearer.
964    
965     5. Reorganized pcre_ucp_findchar().
966    
967    
968 nigel 83 Version 6.3 15-Aug-05
969     ---------------------
970    
971     1. The file libpcre.pc.in did not have general read permission in the tarball.
972    
973     2. There were some problems when building without C++ support:
974    
975     (a) If C++ support was not built, "make install" and "make test" still
976     tried to test it.
977    
978     (b) There were problems when the value of CXX was explicitly set. Some
979     changes have been made to try to fix these, and ...
980    
981     (c) --disable-cpp can now be used to explicitly disable C++ support.
982    
983     (d) The use of @CPP_OBJ@ directly caused a blank line preceded by a
984     backslash in a target when C++ was disabled. This confuses some
985     versions of "make", apparently. Using an intermediate variable solves
986     this. (Same for CPP_LOBJ.)
987    
988     3. $(LINK_FOR_BUILD) now includes $(CFLAGS_FOR_BUILD) and $(LINK)
989     (non-Windows) now includes $(CFLAGS) because these flags are sometimes
990     necessary on certain architectures.
991    
992     4. Added a setting of -export-symbols-regex to the link command to remove
993     those symbols that are exported in the C sense, but actually are local
994     within the library, and not documented. Their names all begin with
995     "_pcre_". This is not a perfect job, because (a) we have to except some
996     symbols that pcretest ("illegally") uses, and (b) the facility isn't always
997     available (and never for static libraries). I have made a note to try to
998     find a way round (a) in the future.
999    
1000    
1001 nigel 81 Version 6.2 01-Aug-05
1002     ---------------------
1003    
1004     1. There was no test for integer overflow of quantifier values. A construction
1005     such as {1111111111111111} would give undefined results. What is worse, if
1006     a minimum quantifier for a parenthesized subpattern overflowed and became
1007     negative, the calculation of the memory size went wrong. This could have
1008     led to memory overwriting.
1009    
1010     2. Building PCRE using VPATH was broken. Hopefully it is now fixed.
1011    
1012     3. Added "b" to the 2nd argument of fopen() in dftables.c, for non-Unix-like
1013     operating environments where this matters.
1014    
1015     4. Applied Giuseppe Maxia's patch to add additional features for controlling
1016     PCRE options from within the C++ wrapper.
1017    
1018     5. Named capturing subpatterns were not being correctly counted when a pattern
1019     was compiled. This caused two problems: (a) If there were more than 100
1020     such subpatterns, the calculation of the memory needed for the whole
1021     compiled pattern went wrong, leading to an overflow error. (b) Numerical
1022     back references of the form \12, where the number was greater than 9, were
1023     not recognized as back references, even though there were sufficient
1024     previous subpatterns.
1025    
1026     6. Two minor patches to pcrecpp.cc in order to allow it to compile on older
1027     versions of gcc, e.g. 2.95.4.
1028    
1029    
1030 nigel 79 Version 6.1 21-Jun-05
1031     ---------------------
1032    
1033     1. There was one reference to the variable "posix" in pcretest.c that was not
1034     surrounded by "#if !defined NOPOSIX".
1035    
1036     2. Make it possible to compile pcretest without DFA support, UTF8 support, or
1037     the cross-check on the old pcre_info() function, for the benefit of the
1038     cut-down version of PCRE that is currently imported into Exim.
1039    
1040     3. A (silly) pattern starting with (?i)(?-i) caused an internal space
1041     allocation error. I've done the easy fix, which wastes 2 bytes for sensible
1042     patterns that start (?i) but I don't think that matters. The use of (?i) is
1043     just an example; this all applies to the other options as well.
1044    
1045     4. Since libtool seems to echo the compile commands it is issuing, the output
1046     from "make" can be reduced a bit by putting "@" in front of each libtool
1047     compile command.
1048    
1049     5. Patch from the folks at Google for configure.in to be a bit more thorough
1050     in checking for a suitable C++ installation before trying to compile the
1051     C++ stuff. This should fix a reported problem when a compiler was present,
1052     but no suitable headers.
1053    
1054     6. The man pages all had just "PCRE" as their title. I have changed them to
1055     be the relevant file name. I have also arranged that these names are
1056     retained in the file doc/pcre.txt, which is a concatenation in text format
1057     of all the man pages except the little individual ones for each function.
1058    
1059     7. The NON-UNIX-USE file had not been updated for the different set of source
1060     files that come with release 6. I also added a few comments about the C++
1061     wrapper.
1062    
1063    
1064 nigel 77 Version 6.0 07-Jun-05
1065     ---------------------
1066    
1067     1. Some minor internal re-organization to help with my DFA experiments.
1068    
1069     2. Some missing #ifdef SUPPORT_UCP conditionals in pcretest and printint that
1070     didn't matter for the library itself when fully configured, but did matter
1071     when compiling without UCP support, or within Exim, where the ucp files are
1072     not imported.
1073    
1074     3. Refactoring of the library code to split up the various functions into
1075     different source modules. The addition of the new DFA matching code (see
1076     below) to a single monolithic source would have made it really too
1077     unwieldy, quite apart from causing all the code to be include in a
1078     statically linked application, when only some functions are used. This is
1079     relevant even without the DFA addition now that patterns can be compiled in
1080     one application and matched in another.
1081    
1082     The downside of splitting up is that there have to be some external
1083     functions and data tables that are used internally in different modules of
1084     the library but which are not part of the API. These have all had their
1085     names changed to start with "_pcre_" so that they are unlikely to clash
1086     with other external names.
1087    
1088     4. Added an alternate matching function, pcre_dfa_exec(), which matches using
1089     a different (DFA) algorithm. Although it is slower than the original
1090     function, it does have some advantages for certain types of matching
1091     problem.
1092    
1093     5. Upgrades to pcretest in order to test the features of pcre_dfa_exec(),
1094     including restarting after a partial match.
1095    
1096     6. A patch for pcregrep that defines INVALID_FILE_ATTRIBUTES if it is not
1097     defined when compiling for Windows was sent to me. I have put it into the
1098     code, though I have no means of testing or verifying it.
1099    
1100     7. Added the pcre_refcount() auxiliary function.
1101    
1102     8. Added the PCRE_FIRSTLINE option. This constrains an unanchored pattern to
1103     match before or at the first newline in the subject string. In pcretest,
1104     the /f option on a pattern can be used to set this.
1105    
1106     9. A repeated \w when used in UTF-8 mode with characters greater than 256
1107     would behave wrongly. This has been present in PCRE since release 4.0.
1108    
1109     10. A number of changes to the pcregrep command:
1110    
1111     (a) Refactored how -x works; insert ^(...)$ instead of setting
1112     PCRE_ANCHORED and checking the length, in preparation for adding
1113     something similar for -w.
1114    
1115     (b) Added the -w (match as a word) option.
1116    
1117     (c) Refactored the way lines are read and buffered so as to have more
1118     than one at a time available.
1119    
1120     (d) Implemented a pcregrep test script.
1121    
1122     (e) Added the -M (multiline match) option. This allows patterns to match
1123     over several lines of the subject. The buffering ensures that at least
1124     8K, or the rest of the document (whichever is the shorter) is available
1125     for matching (and similarly the previous 8K for lookbehind assertions).
1126    
1127     (f) Changed the --help output so that it now says
1128    
1129     -w, --word-regex(p)
1130    
1131     instead of two lines, one with "regex" and the other with "regexp"
1132     because that confused at least one person since the short forms are the
1133     same. (This required a bit of code, as the output is generated
1134     automatically from a table. It wasn't just a text change.)
1135    
1136     (g) -- can be used to terminate pcregrep options if the next thing isn't an
1137     option but starts with a hyphen. Could be a pattern or a path name
1138     starting with a hyphen, for instance.
1139    
1140     (h) "-" can be given as a file name to represent stdin.
1141    
1142     (i) When file names are being printed, "(standard input)" is used for
1143     the standard input, for compatibility with GNU grep. Previously
1144     "<stdin>" was used.
1145    
1146     (j) The option --label=xxx can be used to supply a name to be used for
1147     stdin when file names are being printed. There is no short form.
1148    
1149     (k) Re-factored the options decoding logic because we are going to add
1150     two more options that take data. Such options can now be given in four
1151     different ways, e.g. "-fname", "-f name", "--file=name", "--file name".
1152    
1153     (l) Added the -A, -B, and -C options for requesting that lines of context
1154     around matches be printed.
1155    
1156     (m) Added the -L option to print the names of files that do not contain
1157     any matching lines, that is, the complement of -l.
1158    
1159     (n) The return code is 2 if any file cannot be opened, but pcregrep does
1160     continue to scan other files.
1161    
1162     (o) The -s option was incorrectly implemented. For compatibility with other
1163     greps, it now suppresses the error message for a non-existent or non-
1164     accessible file (but not the return code). There is a new option called
1165     -q that suppresses the output of matching lines, which was what -s was
1166     previously doing.
1167    
1168     (p) Added --include and --exclude options to specify files for inclusion
1169     and exclusion when recursing.
1170    
1171     11. The Makefile was not using the Autoconf-supported LDFLAGS macro properly.
1172     Hopefully, it now does.
1173    
1174     12. Missing cast in pcre_study().
1175    
1176     13. Added an "uninstall" target to the makefile.
1177    
1178     14. Replaced "extern" in the function prototypes in Makefile.in with
1179     "PCRE_DATA_SCOPE", which defaults to 'extern' or 'extern "C"' in the Unix
1180     world, but is set differently for Windows.
1181    
1182     15. Added a second compiling function called pcre_compile2(). The only
1183     difference is that it has an extra argument, which is a pointer to an
1184     integer error code. When there is a compile-time failure, this is set
1185     non-zero, in addition to the error test pointer being set to point to an
1186     error message. The new argument may be NULL if no error number is required
1187     (but then you may as well call pcre_compile(), which is now just a
1188     wrapper). This facility is provided because some applications need a
1189     numeric error indication, but it has also enabled me to tidy up the way
1190     compile-time errors are handled in the POSIX wrapper.
1191    
1192     16. Added VPATH=.libs to the makefile; this should help when building with one
1193     prefix path and installing with another. (Or so I'm told by someone who
1194     knows more about this stuff than I do.)
1195    
1196     17. Added a new option, REG_DOTALL, to the POSIX function regcomp(). This
1197     passes PCRE_DOTALL to the pcre_compile() function, making the "." character
1198     match everything, including newlines. This is not POSIX-compatible, but
1199     somebody wanted the feature. From pcretest it can be activated by using
1200     both the P and the s flags.
1201    
1202     18. AC_PROG_LIBTOOL appeared twice in Makefile.in. Removed one.
1203    
1204     19. libpcre.pc was being incorrectly installed as executable.
1205    
1206     20. A couple of places in pcretest check for end-of-line by looking for '\n';
1207     it now also looks for '\r' so that it will work unmodified on Windows.
1208    
1209     21. Added Google's contributed C++ wrapper to the distribution.
1210    
1211     22. Added some untidy missing memory free() calls in pcretest, to keep
1212     Electric Fence happy when testing.
1213    
1214    
1215    
1216 nigel 75 Version 5.0 13-Sep-04
1217     ---------------------
1218    
1219     1. Internal change: literal characters are no longer packed up into items
1220     containing multiple characters in a single byte-string. Each character
1221     is now matched using a separate opcode. However, there may be more than one
1222     byte in the character in UTF-8 mode.
1223    
1224     2. The pcre_callout_block structure has two new fields: pattern_position and
1225     next_item_length. These contain the offset in the pattern to the next match
1226     item, and its length, respectively.
1227    
1228     3. The PCRE_AUTO_CALLOUT option for pcre_compile() requests the automatic
1229     insertion of callouts before each pattern item. Added the /C option to
1230     pcretest to make use of this.
1231    
1232     4. On the advice of a Windows user, the lines
1233    
1234     #if defined(_WIN32) || defined(WIN32)
1235     _setmode( _fileno( stdout ), 0x8000 );
1236     #endif /* defined(_WIN32) || defined(WIN32) */
1237    
1238     have been added to the source of pcretest. This apparently does useful
1239     magic in relation to line terminators.
1240    
1241     5. Changed "r" and "w" in the calls to fopen() in pcretest to "rb" and "wb"
1242     for the benefit of those environments where the "b" makes a difference.
1243    
1244     6. The icc compiler has the same options as gcc, but "configure" doesn't seem
1245     to know about it. I have put a hack into configure.in that adds in code
1246     to set GCC=yes if CC=icc. This seems to end up at a point in the
1247     generated configure script that is early enough to affect the setting of
1248     compiler options, which is what is needed, but I have no means of testing
1249     whether it really works. (The user who reported this had patched the
1250     generated configure script, which of course I cannot do.)
1251    
1252     LATER: After change 22 below (new libtool files), the configure script
1253     seems to know about icc (and also ecc). Therefore, I have commented out
1254     this hack in configure.in.
1255    
1256     7. Added support for pkg-config (2 patches were sent in).
1257    
1258     8. Negated POSIX character classes that used a combination of internal tables
1259     were completely broken. These were [[:^alpha:]], [[:^alnum:]], and
1260     [[:^ascii]]. Typically, they would match almost any characters. The other
1261     POSIX classes were not broken in this way.
1262    
1263     9. Matching the pattern "\b.*?" against "ab cd", starting at offset 1, failed
1264     to find the match, as PCRE was deluded into thinking that the match had to
1265     start at the start point or following a newline. The same bug applied to
1266     patterns with negative forward assertions or any backward assertions
1267     preceding ".*" at the start, unless the pattern required a fixed first
1268     character. This was a failing pattern: "(?!.bcd).*". The bug is now fixed.
1269    
1270     10. In UTF-8 mode, when moving forwards in the subject after a failed match
1271     starting at the last subject character, bytes beyond the end of the subject
1272     string were read.
1273    
1274     11. Renamed the variable "class" as "classbits" to make life easier for C++
1275     users. (Previously there was a macro definition, but it apparently wasn't
1276     enough.)
1277    
1278     12. Added the new field "tables" to the extra data so that tables can be passed
1279     in at exec time, or the internal tables can be re-selected. This allows
1280     a compiled regex to be saved and re-used at a later time by a different
1281     program that might have everything at different addresses.
1282    
1283     13. Modified the pcre-config script so that, when run on Solaris, it shows a
1284     -R library as well as a -L library.
1285    
1286     14. The debugging options of pcretest (-d on the command line or D on a
1287     pattern) showed incorrect output for anything following an extended class
1288     that contained multibyte characters and which was followed by a quantifier.
1289    
1290     15. Added optional support for general category Unicode character properties
1291     via the \p, \P, and \X escapes. Unicode property support implies UTF-8
1292     support. It adds about 90K to the size of the library. The meanings of the
1293     inbuilt class escapes such as \d and \s have NOT been changed.
1294    
1295     16. Updated pcredemo.c to include calls to free() to release the memory for the
1296     compiled pattern.
1297    
1298     17. The generated file chartables.c was being created in the source directory
1299     instead of in the building directory. This caused the build to fail if the
1300     source directory was different from the building directory, and was
1301     read-only.
1302    
1303     18. Added some sample Win commands from Mark Tetrode into the NON-UNIX-USE
1304     file. No doubt somebody will tell me if they don't make sense... Also added
1305     Dan Mooney's comments about building on OpenVMS.
1306    
1307     19. Added support for partial matching via the PCRE_PARTIAL option for
1308     pcre_exec() and the \P data escape in pcretest.
1309    
1310     20. Extended pcretest with 3 new pattern features:
1311    
1312     (i) A pattern option of the form ">rest-of-line" causes pcretest to
1313     write the compiled pattern to the file whose name is "rest-of-line".
1314     This is a straight binary dump of the data, with the saved pointer to
1315     the character tables forced to be NULL. The study data, if any, is
1316     written too. After writing, pcretest reads a new pattern.
1317    
1318     (ii) If, instead of a pattern, "<rest-of-line" is given, pcretest reads a
1319     compiled pattern from the given file. There must not be any
1320     occurrences of "<" in the file name (pretty unlikely); if there are,
1321     pcretest will instead treat the initial "<" as a pattern delimiter.
1322     After reading in the pattern, pcretest goes on to read data lines as
1323     usual.
1324    
1325     (iii) The F pattern option causes pcretest to flip the bytes in the 32-bit
1326     and 16-bit fields in a compiled pattern, to simulate a pattern that
1327     was compiled on a host of opposite endianness.
1328    
1329     21. The pcre-exec() function can now cope with patterns that were compiled on
1330     hosts of opposite endianness, with this restriction:
1331    
1332     As for any compiled expression that is saved and used later, the tables
1333     pointer field cannot be preserved; the extra_data field in the arguments
1334     to pcre_exec() should be used to pass in a tables address if a value
1335     other than the default internal tables were used at compile time.
1336    
1337     22. Calling pcre_exec() with a negative value of the "ovecsize" parameter is
1338     now diagnosed as an error. Previously, most of the time, a negative number
1339     would have been treated as zero, but if in addition "ovector" was passed as
1340     NULL, a crash could occur.
1341    
1342     23. Updated the files ltmain.sh, config.sub, config.guess, and aclocal.m4 with
1343     new versions from the libtool 1.5 distribution (the last one is a copy of
1344     a file called libtool.m4). This seems to have fixed the need to patch
1345     "configure" to support Darwin 1.3 (which I used to do). However, I still
1346     had to patch ltmain.sh to ensure that ${SED} is set (it isn't on my
1347     workstation).
1348    
1349     24. Changed the PCRE licence to be the more standard "BSD" licence.
1350    
1351    
1352 nigel 73 Version 4.5 01-Dec-03
1353     ---------------------
1354    
1355     1. There has been some re-arrangement of the code for the match() function so
1356     that it can be compiled in a version that does not call itself recursively.
1357     Instead, it keeps those local variables that need separate instances for
1358     each "recursion" in a frame on the heap, and gets/frees frames whenever it
1359     needs to "recurse". Keeping track of where control must go is done by means
1360     of setjmp/longjmp. The whole thing is implemented by a set of macros that
1361     hide most of the details from the main code, and operates only if
1362     NO_RECURSE is defined while compiling pcre.c. If PCRE is built using the
1363     "configure" mechanism, "--disable-stack-for-recursion" turns on this way of
1364     operating.
1365    
1366     To make it easier for callers to provide specially tailored get/free
1367     functions for this usage, two new functions, pcre_stack_malloc, and
1368     pcre_stack_free, are used. They are always called in strict stacking order,
1369     and the size of block requested is always the same.
1370    
1371     The PCRE_CONFIG_STACKRECURSE info parameter can be used to find out whether
1372     PCRE has been compiled to use the stack or the heap for recursion. The
1373     -C option of pcretest uses this to show which version is compiled.
1374    
1375     A new data escape \S, is added to pcretest; it causes the amounts of store
1376     obtained and freed by both kinds of malloc/free at match time to be added
1377     to the output.
1378    
1379     2. Changed the locale test to use "fr_FR" instead of "fr" because that's
1380     what's available on my current Linux desktop machine.
1381    
1382     3. When matching a UTF-8 string, the test for a valid string at the start has
1383     been extended. If start_offset is not zero, PCRE now checks that it points
1384     to a byte that is the start of a UTF-8 character. If not, it returns
1385     PCRE_ERROR_BADUTF8_OFFSET (-11). Note: the whole string is still checked;
1386     this is necessary because there may be backward assertions in the pattern.
1387     When matching the same subject several times, it may save resources to use
1388     PCRE_NO_UTF8_CHECK on all but the first call if the string is long.
1389    
1390     4. The code for checking the validity of UTF-8 strings has been tightened so
1391     that it rejects (a) strings containing 0xfe or 0xff bytes and (b) strings
1392     containing "overlong sequences".
1393    
1394     5. Fixed a bug (appearing twice) that I could not find any way of exploiting!
1395     I had written "if ((digitab[*p++] && chtab_digit) == 0)" where the "&&"
1396     should have been "&", but it just so happened that all the cases this let
1397     through by mistake were picked up later in the function.
1398    
1399     6. I had used a variable called "isblank" - this is a C99 function, causing
1400     some compilers to warn. To avoid this, I renamed it (as "blankclass").
1401    
1402     7. Cosmetic: (a) only output another newline at the end of pcretest if it is
1403     prompting; (b) run "./pcretest /dev/null" at the start of the test script
1404     so the version is shown; (c) stop "make test" echoing "./RunTest".
1405    
1406     8. Added patches from David Burgess to enable PCRE to run on EBCDIC systems.
1407    
1408     9. The prototype for memmove() for systems that don't have it was using
1409     size_t, but the inclusion of the header that defines size_t was later. I've
1410     moved the #includes for the C headers earlier to avoid this.
1411    
1412     10. Added some adjustments to the code to make it easier to compiler on certain
1413     special systems:
1414    
1415     (a) Some "const" qualifiers were missing.
1416     (b) Added the macro EXPORT before all exported functions; by default this
1417     is defined to be empty.
1418     (c) Changed the dftables auxiliary program (that builds chartables.c) so
1419     that it reads its output file name as an argument instead of writing
1420     to the standard output and assuming this can be redirected.
1421    
1422     11. In UTF-8 mode, if a recursive reference (e.g. (?1)) followed a character
1423     class containing characters with values greater than 255, PCRE compilation
1424     went into a loop.
1425    
1426     12. A recursive reference to a subpattern that was within another subpattern
1427     that had a minimum quantifier of zero caused PCRE to crash. For example,
1428     (x(y(?2))z)? provoked this bug with a subject that got as far as the
1429     recursion. If the recursively-called subpattern itself had a zero repeat,
1430     that was OK.
1431    
1432     13. In pcretest, the buffer for reading a data line was set at 30K, but the
1433     buffer into which it was copied (for escape processing) was still set at
1434     1024, so long lines caused crashes.
1435    
1436     14. A pattern such as /[ab]{1,3}+/ failed to compile, giving the error
1437     "internal error: code overflow...". This applied to any character class
1438     that was followed by a possessive quantifier.
1439    
1440     15. Modified the Makefile to add libpcre.la as a prerequisite for
1441     libpcreposix.la because I was told this is needed for a parallel build to
1442     work.
1443    
1444     16. If a pattern that contained .* following optional items at the start was
1445     studied, the wrong optimizing data was generated, leading to matching
1446     errors. For example, studying /[ab]*.*c/ concluded, erroneously, that any
1447     matching string must start with a or b or c. The correct conclusion for
1448     this pattern is that a match can start with any character.
1449    
1450    
1451 nigel 71 Version 4.4 13-Aug-03
1452     ---------------------
1453    
1454     1. In UTF-8 mode, a character class containing characters with values between
1455     127 and 255 was not handled correctly if the compiled pattern was studied.
1456     In fixing this, I have also improved the studying algorithm for such
1457     classes (slightly).
1458    
1459     2. Three internal functions had redundant arguments passed to them. Removal
1460     might give a very teeny performance improvement.
1461    
1462     3. Documentation bug: the value of the capture_top field in a callout is *one
1463     more than* the number of the hightest numbered captured substring.
1464    
1465     4. The Makefile linked pcretest and pcregrep with -lpcre, which could result
1466     in incorrectly linking with a previously installed version. They now link
1467     explicitly with libpcre.la.
1468    
1469     5. configure.in no longer needs to recognize Cygwin specially.
1470    
1471     6. A problem in pcre.in for Windows platforms is fixed.
1472    
1473     7. If a pattern was successfully studied, and the -d (or /D) flag was given to
1474     pcretest, it used to include the size of the study block as part of its
1475     output. Unfortunately, the structure contains a field that has a different
1476     size on different hardware architectures. This meant that the tests that
1477     showed this size failed. As the block is currently always of a fixed size,
1478     this information isn't actually particularly useful in pcretest output, so
1479     I have just removed it.
1480    
1481     8. Three pre-processor statements accidentally did not start in column 1.
1482     Sadly, there are *still* compilers around that complain, even though
1483     standard C has not required this for well over a decade. Sigh.
1484    
1485     9. In pcretest, the code for checking callouts passed small integers in the
1486     callout_data field, which is a void * field. However, some picky compilers
1487     complained about the casts involved for this on 64-bit systems. Now
1488     pcretest passes the address of the small integer instead, which should get
1489     rid of the warnings.
1490    
1491     10. By default, when in UTF-8 mode, PCRE now checks for valid UTF-8 strings at
1492     both compile and run time, and gives an error if an invalid UTF-8 sequence
1493     is found. There is a option for disabling this check in cases where the
1494     string is known to be correct and/or the maximum performance is wanted.
1495    
1496     11. In response to a bug report, I changed one line in Makefile.in from
1497    
1498     -Wl,--out-implib,.libs/lib@WIN_PREFIX@pcreposix.dll.a \
1499     to
1500     -Wl,--out-implib,.libs/@WIN_PREFIX@libpcreposix.dll.a \
1501    
1502     to look similar to other lines, but I have no way of telling whether this
1503     is the right thing to do, as I do not use Windows. No doubt I'll get told
1504     if it's wrong...
1505    
1506    
1507 nigel 69 Version 4.3 21-May-03
1508     ---------------------
1509    
1510     1. Two instances of @WIN_PREFIX@ omitted from the Windows targets in the
1511     Makefile.
1512    
1513     2. Some refactoring to improve the quality of the code:
1514    
1515     (i) The utf8_table... variables are now declared "const".
1516    
1517     (ii) The code for \cx, which used the "case flipping" table to upper case
1518     lower case letters, now just substracts 32. This is ASCII-specific,
1519     but the whole concept of \cx is ASCII-specific, so it seems
1520     reasonable.
1521    
1522     (iii) PCRE was using its character types table to recognize decimal and
1523     hexadecimal digits in the pattern. This is silly, because it handles
1524     only 0-9, a-f, and A-F, but the character types table is locale-
1525     specific, which means strange things might happen. A private
1526     table is now used for this - though it costs 256 bytes, a table is
1527     much faster than multiple explicit tests. Of course, the standard
1528     character types table is still used for matching digits in subject
1529     strings against \d.
1530    
1531     (iv) Strictly, the identifier ESC_t is reserved by POSIX (all identifiers
1532     ending in _t are). So I've renamed it as ESC_tee.
1533    
1534     3. The first argument for regexec() in the POSIX wrapper should have been
1535     defined as "const".
1536    
1537     4. Changed pcretest to use malloc() for its buffers so that they can be
1538     Electric Fenced for debugging.
1539    
1540     5. There were several places in the code where, in UTF-8 mode, PCRE would try
1541     to read one or more bytes before the start of the subject string. Often this
1542     had no effect on PCRE's behaviour, but in some circumstances it could
1543     provoke a segmentation fault.
1544    
1545     6. A lookbehind at the start of a pattern in UTF-8 mode could also cause PCRE
1546     to try to read one or more bytes before the start of the subject string.
1547    
1548     7. A lookbehind in a pattern matched in non-UTF-8 mode on a PCRE compiled with
1549     UTF-8 support could misbehave in various ways if the subject string
1550     contained bytes with the 0x80 bit set and the 0x40 bit unset in a lookbehind
1551     area. (PCRE was not checking for the UTF-8 mode flag, and trying to move
1552     back over UTF-8 characters.)
1553    
1554    
1555 nigel 67 Version 4.2 14-Apr-03
1556     ---------------------
1557    
1558     1. Typo "#if SUPPORT_UTF8" instead of "#ifdef SUPPORT_UTF8" fixed.
1559    
1560     2. Changes to the building process, supplied by Ronald Landheer-Cieslak
1561     [ON_WINDOWS]: new variable, "#" on non-Windows platforms
1562     [NOT_ON_WINDOWS]: new variable, "#" on Windows platforms
1563     [WIN_PREFIX]: new variable, "cyg" for Cygwin
1564     * Makefile.in: use autoconf substitution for OBJEXT, EXEEXT, BUILD_OBJEXT
1565     and BUILD_EXEEXT
1566     Note: automatic setting of the BUILD variables is not yet working
1567     set CPPFLAGS and BUILD_CPPFLAGS (but don't use yet) - should be used at
1568     compile-time but not at link-time
1569     [LINK]: use for linking executables only
1570     make different versions for Windows and non-Windows
1571     [LINKLIB]: new variable, copy of UNIX-style LINK, used for linking
1572     libraries
1573     [LINK_FOR_BUILD]: new variable
1574     [OBJEXT]: use throughout
1575     [EXEEXT]: use throughout
1576     <winshared>: new target
1577     <wininstall>: new target
1578     <dftables.o>: use native compiler
1579     <dftables>: use native linker
1580     <install>: handle Windows platform correctly
1581     <clean>: ditto
1582     <check>: ditto
1583     copy DLL to top builddir before testing
1584    
1585     As part of these changes, -no-undefined was removed again. This was reported
1586     to give trouble on HP-UX 11.0, so getting rid of it seems like a good idea
1587     in any case.
1588    
1589     3. Some tidies to get rid of compiler warnings:
1590    
1591     . In the match_data structure, match_limit was an unsigned long int, whereas
1592     match_call_count was an int. I've made them both unsigned long ints.
1593    
1594     . In pcretest the fact that a const uschar * doesn't automatically cast to
1595     a void * provoked a warning.
1596    
1597     . Turning on some more compiler warnings threw up some "shadow" variables
1598     and a few more missing casts.
1599    
1600     4. If PCRE was complied with UTF-8 support, but called without the PCRE_UTF8
1601     option, a class that contained a single character with a value between 128
1602     and 255 (e.g. /[\xFF]/) caused PCRE to crash.
1603    
1604     5. If PCRE was compiled with UTF-8 support, but called without the PCRE_UTF8
1605     option, a class that contained several characters, but with at least one
1606     whose value was between 128 and 255 caused PCRE to crash.
1607    
1608    
1609 nigel 65 Version 4.1 12-Mar-03
1610     ---------------------
1611 nigel 63
1612 nigel 65 1. Compiling with gcc -pedantic found a couple of places where casts were
1613     needed, and a string in dftables.c that was longer than standard compilers are
1614     required to support.
1615    
1616     2. Compiling with Sun's compiler found a few more places where the code could
1617     be tidied up in order to avoid warnings.
1618    
1619     3. The variables for cross-compiling were called HOST_CC and HOST_CFLAGS; the
1620     first of these names is deprecated in the latest Autoconf in favour of the name
1621     CC_FOR_BUILD, because "host" is typically used to mean the system on which the
1622     compiled code will be run. I can't find a reference for HOST_CFLAGS, but by
1623     analogy I have changed it to CFLAGS_FOR_BUILD.
1624    
1625     4. Added -no-undefined to the linking command in the Makefile, because this is
1626     apparently helpful for Windows. To make it work, also added "-L. -lpcre" to the
1627     linking step for the pcreposix library.
1628    
1629     5. PCRE was failing to diagnose the case of two named groups with the same
1630     name.
1631    
1632     6. A problem with one of PCRE's optimizations was discovered. PCRE remembers a
1633     literal character that is needed in the subject for a match, and scans along to
1634     ensure that it is present before embarking on the full matching process. This
1635     saves time in cases of nested unlimited repeats that are never going to match.
1636     Problem: the scan can take a lot of time if the subject is very long (e.g.
1637     megabytes), thus penalizing straightforward matches. It is now done only if the
1638     amount of subject to be scanned is less than 1000 bytes.
1639    
1640     7. A lesser problem with the same optimization is that it was recording the
1641     first character of an anchored pattern as "needed", thus provoking a search
1642     right along the subject, even when the first match of the pattern was going to
1643     fail. The "needed" character is now not set for anchored patterns, unless it
1644     follows something in the pattern that is of non-fixed length. Thus, it still
1645     fulfils its original purpose of finding quick non-matches in cases of nested
1646     unlimited repeats, but isn't used for simple anchored patterns such as /^abc/.
1647    
1648    
1649     Version 4.0 17-Feb-03
1650     ---------------------
1651    
1652 nigel 63 1. If a comment in an extended regex that started immediately after a meta-item
1653     extended to the end of string, PCRE compiled incorrect data. This could lead to
1654     all kinds of weird effects. Example: /#/ was bad; /()#/ was bad; /a#/ was not.
1655    
1656     2. Moved to autoconf 2.53 and libtool 1.4.2.
1657    
1658     3. Perl 5.8 no longer needs "use utf8" for doing UTF-8 things. Consequently,
1659     the special perltest8 script is no longer needed - all the tests can be run
1660     from a single perltest script.
1661    
1662     4. From 5.004, Perl has not included the VT character (0x0b) in the set defined
1663     by \s. It has now been removed in PCRE. This means it isn't recognized as
1664     whitespace in /x regexes too, which is the same as Perl. Note that the POSIX
1665     class [:space:] *does* include VT, thereby creating a mess.
1666    
1667     5. Added the class [:blank:] (a GNU extension from Perl 5.8) to match only
1668     space and tab.
1669    
1670     6. Perl 5.005 was a long time ago. It's time to amalgamate the tests that use
1671     its new features into the main test script, reducing the number of scripts.
1672    
1673     7. Perl 5.8 has changed the meaning of patterns like /a(?i)b/. Earlier versions
1674     were backward compatible, and made the (?i) apply to the whole pattern, as if
1675     /i were given. Now it behaves more logically, and applies the option setting
1676     only to what follows. PCRE has been changed to follow suit. However, if it
1677     finds options settings right at the start of the pattern, it extracts them into
1678     the global options, as before. Thus, they show up in the info data.
1679    
1680     8. Added support for the \Q...\E escape sequence. Characters in between are
1681     treated as literals. This is slightly different from Perl in that $ and @ are
1682     also handled as literals inside the quotes. In Perl, they will cause variable
1683     interpolation. Note the following examples:
1684    
1685     Pattern PCRE matches Perl matches
1686    
1687     \Qabc$xyz\E abc$xyz abc followed by the contents of $xyz
1688     \Qabc\$xyz\E abc\$xyz abc\$xyz
1689     \Qabc\E\$\Qxyz\E abc$xyz abc$xyz
1690    
1691     For compatibility with Perl, \Q...\E sequences are recognized inside character
1692     classes as well as outside them.
1693    
1694     9. Re-organized 3 code statements in pcretest to avoid "overflow in
1695     floating-point constant arithmetic" warnings from a Microsoft compiler. Added a
1696     (size_t) cast to one statement in pcretest and one in pcreposix to avoid
1697     signed/unsigned warnings.
1698    
1699     10. SunOS4 doesn't have strtoul(). This was used only for unpicking the -o
1700     option for pcretest, so I've replaced it by a simple function that does just
1701     that job.
1702    
1703     11. pcregrep was ending with code 0 instead of 2 for the commands "pcregrep" or
1704     "pcregrep -".
1705    
1706     12. Added "possessive quantifiers" ?+, *+, ++, and {,}+ which come from Sun's
1707     Java package. This provides some syntactic sugar for simple cases of what my
1708     documentation calls "once-only subpatterns". A pattern such as x*+ is the same
1709     as (?>x*). In other words, if what is inside (?>...) is just a single repeated
1710     item, you can use this simplified notation. Note that only makes sense with
1711     greedy quantifiers. Consequently, the use of the possessive quantifier forces
1712     greediness, whatever the setting of the PCRE_UNGREEDY option.
1713    
1714     13. A change of greediness default within a pattern was not taking effect at
1715     the current level for patterns like /(b+(?U)a+)/. It did apply to parenthesized
1716     subpatterns that followed. Patterns like /b+(?U)a+/ worked because the option
1717     was abstracted outside.
1718    
1719     14. PCRE now supports the \G assertion. It is true when the current matching
1720     position is at the start point of the match. This differs from \A when the
1721     starting offset is non-zero. Used with the /g option of pcretest (or similar
1722     code), it works in the same way as it does for Perl's /g option. If all
1723     alternatives of a regex begin with \G, the expression is anchored to the start
1724     match position, and the "anchored" flag is set in the compiled expression.
1725    
1726     15. Some bugs concerning the handling of certain option changes within patterns
1727     have been fixed. These applied to options other than (?ims). For example,
1728     "a(?x: b c )d" did not match "XabcdY" but did match "Xa b c dY". It should have
1729     been the other way round. Some of this was related to change 7 above.
1730    
1731     16. PCRE now gives errors for /[.x.]/ and /[=x=]/ as unsupported POSIX
1732     features, as Perl does. Previously, PCRE gave the warnings only for /[[.x.]]/
1733     and /[[=x=]]/. PCRE now also gives an error for /[:name:]/ because it supports
1734     POSIX classes only within a class (e.g. /[[:alpha:]]/).
1735    
1736     17. Added support for Perl's \C escape. This matches one byte, even in UTF8
1737     mode. Unlike ".", it always matches newline, whatever the setting of
1738     PCRE_DOTALL. However, PCRE does not permit \C to appear in lookbehind
1739     assertions. Perl allows it, but it doesn't (in general) work because it can't
1740     calculate the length of the lookbehind. At least, that's the case for Perl
1741     5.8.0 - I've been told they are going to document that it doesn't work in
1742     future.
1743    
1744     18. Added an error diagnosis for escapes that PCRE does not support: these are
1745     \L, \l, \N, \P, \p, \U, \u, and \X.
1746    
1747     19. Although correctly diagnosing a missing ']' in a character class, PCRE was
1748     reading past the end of the pattern in cases such as /[abcd/.
1749    
1750     20. PCRE was getting more memory than necessary for patterns with classes that
1751     contained both POSIX named classes and other characters, e.g. /[[:space:]abc/.
1752    
1753     21. Added some code, conditional on #ifdef VPCOMPAT, to make life easier for
1754     compiling PCRE for use with Virtual Pascal.
1755    
1756     22. Small fix to the Makefile to make it work properly if the build is done
1757     outside the source tree.
1758    
1759     23. Added a new extension: a condition to go with recursion. If a conditional
1760     subpattern starts with (?(R) the "true" branch is used if recursion has
1761     happened, whereas the "false" branch is used only at the top level.
1762    
1763     24. When there was a very long string of literal characters (over 255 bytes
1764     without UTF support, over 250 bytes with UTF support), the computation of how
1765     much memory was required could be incorrect, leading to segfaults or other
1766     strange effects.
1767    
1768     25. PCRE was incorrectly assuming anchoring (either to start of subject or to
1769     start of line for a non-DOTALL pattern) when a pattern started with (.*) and
1770     there was a subsequent back reference to those brackets. This meant that, for
1771     example, /(.*)\d+\1/ failed to match "abc123bc". Unfortunately, it isn't
1772     possible to check for precisely this case. All we can do is abandon the
1773     optimization if .* occurs inside capturing brackets when there are any back
1774     references whatsoever. (See below for a better fix that came later.)
1775    
1776     26. The handling of the optimization for finding the first character of a
1777     non-anchored pattern, and for finding a character that is required later in the
1778     match were failing in some cases. This didn't break the matching; it just
1779     failed to optimize when it could. The way this is done has been re-implemented.
1780    
1781     27. Fixed typo in error message for invalid (?R item (it said "(?p").
1782    
1783     28. Added a new feature that provides some of the functionality that Perl
1784     provides with (?{...}). The facility is termed a "callout". The way it is done
1785     in PCRE is for the caller to provide an optional function, by setting
1786     pcre_callout to its entry point. Like pcre_malloc and pcre_free, this is a
1787     global variable. By default it is unset, which disables all calling out. To get
1788     the function called, the regex must include (?C) at appropriate points. This
1789     is, in fact, equivalent to (?C0), and any number <= 255 may be given with (?C).
1790     This provides a means of identifying different callout points. When PCRE
1791     reaches such a point in the regex, if pcre_callout has been set, the external
1792     function is called. It is provided with data in a structure called
1793     pcre_callout_block, which is defined in pcre.h. If the function returns 0,
1794     matching continues; if it returns a non-zero value, the match at the current
1795     point fails. However, backtracking will occur if possible. [This was changed
1796     later and other features added - see item 49 below.]
1797    
1798     29. pcretest is upgraded to test the callout functionality. It provides a
1799     callout function that displays information. By default, it shows the start of
1800     the match and the current position in the text. There are some new data escapes
1801     to vary what happens:
1802    
1803     \C+ in addition, show current contents of captured substrings
1804     \C- do not supply a callout function
1805     \C!n return 1 when callout number n is reached
1806     \C!n!m return 1 when callout number n is reached for the mth time
1807    
1808     30. If pcregrep was called with the -l option and just a single file name, it
1809     output "<stdin>" if a match was found, instead of the file name.
1810    
1811     31. Improve the efficiency of the POSIX API to PCRE. If the number of capturing
1812     slots is less than POSIX_MALLOC_THRESHOLD, use a block on the stack to pass to
1813     pcre_exec(). This saves a malloc/free per call. The default value of
1814     POSIX_MALLOC_THRESHOLD is 10; it can be changed by --with-posix-malloc-threshold
1815     when configuring.
1816    
1817     32. The default maximum size of a compiled pattern is 64K. There have been a
1818     few cases of people hitting this limit. The code now uses macros to handle the
1819     storing of links as offsets within the compiled pattern. It defaults to 2-byte
1820     links, but this can be changed to 3 or 4 bytes by --with-link-size when
1821     configuring. Tests 2 and 5 work only with 2-byte links because they output
1822     debugging information about compiled patterns.
1823    
1824     33. Internal code re-arrangements:
1825    
1826     (a) Moved the debugging function for printing out a compiled regex into
1827     its own source file (printint.c) and used #include to pull it into
1828     pcretest.c and, when DEBUG is defined, into pcre.c, instead of having two
1829     separate copies.
1830    
1831     (b) Defined the list of op-code names for debugging as a macro in
1832     internal.h so that it is next to the definition of the opcodes.
1833    
1834     (c) Defined a table of op-code lengths for simpler skipping along compiled
1835     code. This is again a macro in internal.h so that it is next to the
1836     definition of the opcodes.
1837    
1838     34. Added support for recursive calls to individual subpatterns, along the
1839     lines of Robin Houston's patch (but implemented somewhat differently).
1840    
1841     35. Further mods to the Makefile to help Win32. Also, added code to pcregrep to
1842     allow it to read and process whole directories in Win32. This code was
1843     contributed by Lionel Fourquaux; it has not been tested by me.
1844    
1845     36. Added support for named subpatterns. The Python syntax (?P<name>...) is
1846     used to name a group. Names consist of alphanumerics and underscores, and must
1847     be unique. Back references use the syntax (?P=name) and recursive calls use
1848     (?P>name) which is a PCRE extension to the Python extension. Groups still have
1849     numbers. The function pcre_fullinfo() can be used after compilation to extract
1850     a name/number map. There are three relevant calls:
1851    
1852     PCRE_INFO_NAMEENTRYSIZE yields the size of each entry in the map
1853     PCRE_INFO_NAMECOUNT yields the number of entries
1854     PCRE_INFO_NAMETABLE yields a pointer to the map.
1855    
1856     The map is a vector of fixed-size entries. The size of each entry depends on
1857     the length of the longest name used. The first two bytes of each entry are the
1858     group number, most significant byte first. There follows the corresponding
1859     name, zero terminated. The names are in alphabetical order.
1860    
1861     37. Make the maximum literal string in the compiled code 250 for the non-UTF-8
1862     case instead of 255. Making it the same both with and without UTF-8 support
1863     means that the same test output works with both.
1864    
1865     38. There was a case of malloc(0) in the POSIX testing code in pcretest. Avoid
1866     calling malloc() with a zero argument.
1867    
1868     39. Change 25 above had to resort to a heavy-handed test for the .* anchoring
1869     optimization. I've improved things by keeping a bitmap of backreferences with
1870     numbers 1-31 so that if .* occurs inside capturing brackets that are not in
1871     fact referenced, the optimization can be applied. It is unlikely that a
1872     relevant occurrence of .* (i.e. one which might indicate anchoring or forcing
1873     the match to follow \n) will appear inside brackets with a number greater than
1874     31, but if it does, any back reference > 31 suppresses the optimization.
1875    
1876     40. Added a new compile-time option PCRE_NO_AUTO_CAPTURE. This has the effect
1877     of disabling numbered capturing parentheses. Any opening parenthesis that is
1878     not followed by ? behaves as if it were followed by ?: but named parentheses
1879     can still be used for capturing (and they will acquire numbers in the usual
1880     way).
1881    
1882     41. Redesigned the return codes from the match() function into yes/no/error so
1883     that errors can be passed back from deep inside the nested calls. A malloc
1884     failure while inside a recursive subpattern call now causes the
1885     PCRE_ERROR_NOMEMORY return instead of quietly going wrong.
1886    
1887     42. It is now possible to set a limit on the number of times the match()
1888     function is called in a call to pcre_exec(). This facility makes it possible to
1889     limit the amount of recursion and backtracking, though not in a directly
1890     obvious way, because the match() function is used in a number of different
1891     circumstances. The count starts from zero for each position in the subject
1892     string (for non-anchored patterns). The default limit is, for compatibility, a
1893     large number, namely 10 000 000. You can change this in two ways:
1894    
1895     (a) When configuring PCRE before making, you can use --with-match-limit=n
1896     to set a default value for the compiled library.
1897    
1898     (b) For each call to pcre_exec(), you can pass a pcre_extra block in which
1899     a different value is set. See 45 below.
1900    
1901     If the limit is exceeded, pcre_exec() returns PCRE_ERROR_MATCHLIMIT.
1902    
1903     43. Added a new function pcre_config(int, void *) to enable run-time extraction
1904     of things that can be changed at compile time. The first argument specifies
1905     what is wanted and the second points to where the information is to be placed.
1906     The current list of available information is:
1907    
1908     PCRE_CONFIG_UTF8
1909    
1910     The output is an integer that is set to one if UTF-8 support is available;
1911     otherwise it is set to zero.
1912    
1913     PCRE_CONFIG_NEWLINE
1914    
1915     The output is an integer that it set to the value of the code that is used for
1916     newline. It is either LF (10) or CR (13).
1917    
1918     PCRE_CONFIG_LINK_SIZE
1919    
1920     The output is an integer that contains the number of bytes used for internal
1921     linkage in compiled expressions. The value is 2, 3, or 4. See item 32 above.
1922    
1923     PCRE_CONFIG_POSIX_MALLOC_THRESHOLD
1924    
1925     The output is an integer that contains the threshold above which the POSIX
1926     interface uses malloc() for output vectors. See item 31 above.
1927    
1928     PCRE_CONFIG_MATCH_LIMIT
1929    
1930     The output is an unsigned integer that contains the default limit of the number
1931     of match() calls in a pcre_exec() execution. See 42 above.
1932    
1933     44. pcretest has been upgraded by the addition of the -C option. This causes it
1934     to extract all the available output from the new pcre_config() function, and to
1935     output it. The program then exits immediately.
1936    
1937     45. A need has arisen to pass over additional data with calls to pcre_exec() in
1938     order to support additional features. One way would have been to define
1939     pcre_exec2() (for example) with extra arguments, but this would not have been
1940     extensible, and would also have required all calls to the original function to
1941     be mapped to the new one. Instead, I have chosen to extend the mechanism that
1942     is used for passing in "extra" data from pcre_study().
1943    
1944     The pcre_extra structure is now exposed and defined in pcre.h. It currently
1945     contains the following fields:
1946    
1947     flags a bitmap indicating which of the following fields are set
1948     study_data opaque data from pcre_study()
1949     match_limit a way of specifying a limit on match() calls for a specific
1950     call to pcre_exec()
1951     callout_data data for callouts (see 49 below)
1952    
1953     The flag bits are also defined in pcre.h, and are
1954    
1955     PCRE_EXTRA_STUDY_DATA
1956     PCRE_EXTRA_MATCH_LIMIT
1957     PCRE_EXTRA_CALLOUT_DATA
1958    
1959     The pcre_study() function now returns one of these new pcre_extra blocks, with
1960     the actual study data pointed to by the study_data field, and the
1961     PCRE_EXTRA_STUDY_DATA flag set. This can be passed directly to pcre_exec() as
1962     before. That is, this change is entirely upwards-compatible and requires no
1963     change to existing code.
1964    
1965     If you want to pass in additional data to pcre_exec(), you can either place it
1966     in a pcre_extra block provided by pcre_study(), or create your own pcre_extra
1967     block.
1968    
1969     46. pcretest has been extended to test the PCRE_EXTRA_MATCH_LIMIT feature. If a
1970     data string contains the escape sequence \M, pcretest calls pcre_exec() several
1971     times with different match limits, until it finds the minimum value needed for
1972     pcre_exec() to complete. The value is then output. This can be instructive; for
1973     most simple matches the number is quite small, but for pathological cases it
1974     gets very large very quickly.
1975    
1976     47. There's a new option for pcre_fullinfo() called PCRE_INFO_STUDYSIZE. It
1977     returns the size of the data block pointed to by the study_data field in a
1978     pcre_extra block, that is, the value that was passed as the argument to
1979     pcre_malloc() when PCRE was getting memory in which to place the information
1980     created by pcre_study(). The fourth argument should point to a size_t variable.
1981     pcretest has been extended so that this information is shown after a successful
1982     pcre_study() call when information about the compiled regex is being displayed.
1983    
1984     48. Cosmetic change to Makefile: there's no need to have / after $(DESTDIR)
1985     because what follows is always an absolute path. (Later: it turns out that this
1986     is more than cosmetic for MinGW, because it doesn't like empty path
1987     components.)
1988    
1989     49. Some changes have been made to the callout feature (see 28 above):
1990    
1991     (i) A callout function now has three choices for what it returns:
1992    
1993     0 => success, carry on matching
1994     > 0 => failure at this point, but backtrack if possible
1995     < 0 => serious error, return this value from pcre_exec()
1996    
1997     Negative values should normally be chosen from the set of PCRE_ERROR_xxx
1998     values. In particular, returning PCRE_ERROR_NOMATCH forces a standard
1999     "match failed" error. The error number PCRE_ERROR_CALLOUT is reserved for
2000     use by callout functions. It will never be used by PCRE itself.
2001    
2002     (ii) The pcre_extra structure (see 45 above) has a void * field called
2003     callout_data, with corresponding flag bit PCRE_EXTRA_CALLOUT_DATA. The
2004     pcre_callout_block structure has a field of the same name. The contents of
2005     the field passed in the pcre_extra structure are passed to the callout
2006     function in the corresponding field in the callout block. This makes it
2007     easier to use the same callout-containing regex from multiple threads. For
2008     testing, the pcretest program has a new data escape
2009    
2010     \C*n pass the number n (may be negative) as callout_data
2011    
2012     If the callout function in pcretest receives a non-zero value as
2013     callout_data, it returns that value.
2014    
2015     50. Makefile wasn't handling CFLAGS properly when compiling dftables. Also,
2016     there were some redundant $(CFLAGS) in commands that are now specified as
2017     $(LINK), which already includes $(CFLAGS).
2018    
2019     51. Extensions to UTF-8 support are listed below. These all apply when (a) PCRE
2020     has been compiled with UTF-8 support *and* pcre_compile() has been compiled
2021     with the PCRE_UTF8 flag. Patterns that are compiled without that flag assume
2022     one-byte characters throughout. Note that case-insensitive matching applies
2023     only to characters whose values are less than 256. PCRE doesn't support the
2024     notion of cases for higher-valued characters.
2025    
2026     (i) A character class whose characters are all within 0-255 is handled as
2027     a bit map, and the map is inverted for negative classes. Previously, a
2028     character > 255 always failed to match such a class; however it should
2029     match if the class was a negative one (e.g. [^ab]). This has been fixed.
2030    
2031     (ii) A negated character class with a single character < 255 is coded as
2032     "not this character" (OP_NOT). This wasn't working properly when the test
2033     character was multibyte, either singly or repeated.
2034    
2035     (iii) Repeats of multibyte characters are now handled correctly in UTF-8
2036     mode, for example: \x{100}{2,3}.
2037    
2038     (iv) The character escapes \b, \B, \d, \D, \s, \S, \w, and \W (either
2039     singly or repeated) now correctly test multibyte characters. However,
2040     PCRE doesn't recognize any characters with values greater than 255 as
2041     digits, spaces, or word characters. Such characters always match \D, \S,
2042     and \W, and never match \d, \s, or \w.
2043    
2044     (v) Classes may now contain characters and character ranges with values
2045     greater than 255. For example: [ab\x{100}-\x{400}].
2046    
2047     (vi) pcregrep now has a --utf-8 option (synonym -u) which makes it call
2048     PCRE in UTF-8 mode.
2049    
2050     52. The info request value PCRE_INFO_FIRSTCHAR has been renamed
2051     PCRE_INFO_FIRSTBYTE because it is a byte value. However, the old name is
2052     retained for backwards compatibility. (Note that LASTLITERAL is also a byte
2053     value.)
2054    
2055     53. The single man page has become too large. I have therefore split it up into
2056     a number of separate man pages. These also give rise to individual HTML pages;
2057     these are now put in a separate directory, and there is an index.html page that
2058     lists them all. Some hyperlinking between the pages has been installed.
2059    
2060     54. Added convenience functions for handling named capturing parentheses.
2061    
2062     55. Unknown escapes inside character classes (e.g. [\M]) and escapes that
2063     aren't interpreted therein (e.g. [\C]) are literals in Perl. This is now also
2064     true in PCRE, except when the PCRE_EXTENDED option is set, in which case they
2065     are faulted.
2066    
2067     56. Introduced HOST_CC and HOST_CFLAGS which can be set in the environment when
2068     calling configure. These values are used when compiling the dftables.c program
2069     which is run to generate the source of the default character tables. They
2070     default to the values of CC and CFLAGS. If you are cross-compiling PCRE,
2071     you will need to set these values.
2072    
2073     57. Updated the building process for Windows DLL, as provided by Fred Cox.
2074    
2075    
2076     Version 3.9 02-Jan-02
2077 nigel 61 ---------------------
2078    
2079     1. A bit of extraneous text had somehow crept into the pcregrep documentation.
2080    
2081     2. If --disable-static was given, the building process failed when trying to
2082     build pcretest and pcregrep. (For some reason it was using libtool to compile
2083     them, which is not right, as they aren't part of the library.)
2084    
2085    
2086 nigel 59 Version 3.8 18-Dec-01
2087     ---------------------
2088    
2089     1. The experimental UTF-8 code was completely screwed up. It was packing the
2090     bytes in the wrong order. How dumb can you get?
2091    
2092    
2093 nigel 57 Version 3.7 29-Oct-01
2094     ---------------------
2095    
2096     1. In updating pcretest to check change 1 of version 3.6, I screwed up.
2097     This caused pcretest, when used on the test data, to segfault. Unfortunately,
2098     this didn't happen under Solaris 8, where I normally test things.
2099    
2100 nigel 59 2. The Makefile had to be changed to make it work on BSD systems, where 'make'
2101     doesn't seem to recognize that ./xxx and xxx are the same file. (This entry
2102     isn't in ChangeLog distributed with 3.7 because I forgot when I hastily made
2103     this fix an hour or so after the initial 3.7 release.)
2104 nigel 57
2105 nigel 59
2106 nigel 55 Version 3.6 23-Oct-01
2107     ---------------------
2108    
2109     1. Crashed with /(sens|respons)e and \1ibility/ and "sense and sensibility" if
2110     offsets passed as NULL with zero offset count.
2111    
2112     2. The config.guess and config.sub files had not been updated when I moved to
2113     the latest autoconf.
2114    
2115    
2116 nigel 53 Version 3.5 15-Aug-01
2117     ---------------------
2118 nigel 5
2119 nigel 53 1. Added some missing #if !defined NOPOSIX conditionals in pcretest.c that
2120     had been forgotten.
2121    
2122     2. By using declared but undefined structures, we can avoid using "void"
2123     definitions in pcre.h while keeping the internal definitions of the structures
2124     private.
2125    
2126     3. The distribution is now built using autoconf 2.50 and libtool 1.4. From a
2127     user point of view, this means that both static and shared libraries are built
2128     by default, but this can be individually controlled. More of the work of
2129     handling this static/shared cases is now inside libtool instead of PCRE's make
2130     file.
2131    
2132     4. The pcretest utility is now installed along with pcregrep because it is
2133     useful for users (to test regexs) and by doing this, it automatically gets
2134     relinked by libtool. The documentation has been turned into a man page, so
2135     there are now .1, .txt, and .html versions in /doc.
2136    
2137     5. Upgrades to pcregrep:
2138     (i) Added long-form option names like gnu grep.
2139     (ii) Added --help to list all options with an explanatory phrase.
2140     (iii) Added -r, --recursive to recurse into sub-directories.
2141     (iv) Added -f, --file to read patterns from a file.
2142    
2143     6. pcre_exec() was referring to its "code" argument before testing that
2144     argument for NULL (and giving an error if it was NULL).
2145    
2146     7. Upgraded Makefile.in to allow for compiling in a different directory from
2147     the source directory.
2148    
2149     8. Tiny buglet in pcretest: when pcre_fullinfo() was called to retrieve the
2150     options bits, the pointer it was passed was to an int instead of to an unsigned
2151     long int. This mattered only on 64-bit systems.
2152    
2153     9. Fixed typo (3.4/1) in pcre.h again. Sigh. I had changed pcre.h (which is
2154     generated) instead of pcre.in, which it its source. Also made the same change
2155     in several of the .c files.
2156    
2157     10. A new release of gcc defines printf() as a macro, which broke pcretest
2158     because it had an ifdef in the middle of a string argument for printf(). Fixed
2159     by using separate calls to printf().
2160    
2161     11. Added --enable-newline-is-cr and --enable-newline-is-lf to the configure
2162     script, to force use of CR or LF instead of \n in the source. On non-Unix
2163     systems, the value can be set in config.h.
2164    
2165     12. The limit of 200 on non-capturing parentheses is a _nesting_ limit, not an
2166     absolute limit. Changed the text of the error message to make this clear, and
2167     likewise updated the man page.
2168    
2169     13. The limit of 99 on the number of capturing subpatterns has been removed.
2170     The new limit is 65535, which I hope will not be a "real" limit.
2171    
2172    
2173 nigel 51 Version 3.4 22-Aug-00
2174     ---------------------
2175    
2176     1. Fixed typo in pcre.h: unsigned const char * changed to const unsigned char *.
2177    
2178     2. Diagnose condition (?(0) as an error instead of crashing on matching.
2179    
2180    
2181 nigel 49 Version 3.3 01-Aug-00
2182     ---------------------
2183    
2184     1. If an octal character was given, but the value was greater than \377, it
2185     was not getting masked to the least significant bits, as documented. This could
2186     lead to crashes in some systems.
2187    
2188     2. Perl 5.6 (if not earlier versions) accepts classes like [a-\d] and treats
2189     the hyphen as a literal. PCRE used to give an error; it now behaves like Perl.
2190    
2191     3. Added the functions pcre_free_substring() and pcre_free_substring_list().
2192     These just pass their arguments on to (pcre_free)(), but they are provided
2193     because some uses of PCRE bind it to non-C systems that can call its functions,
2194     but cannot call free() or pcre_free() directly.
2195    
2196     4. Add "make test" as a synonym for "make check". Corrected some comments in
2197     the Makefile.
2198    
2199     5. Add $(DESTDIR)/ in front of all the paths in the "install" target in the
2200     Makefile.
2201    
2202     6. Changed the name of pgrep to pcregrep, because Solaris has introduced a
2203     command called pgrep for grepping around the active processes.
2204    
2205     7. Added the beginnings of support for UTF-8 character strings.
2206    
2207     8. Arranged for the Makefile to pass over the settings of CC, CFLAGS, and
2208     RANLIB to ./ltconfig so that they are used by libtool. I think these are all
2209     the relevant ones. (AR is not passed because ./ltconfig does its own figuring
2210     out for the ar command.)
2211    
2212    
2213 nigel 47 Version 3.2 12-May-00
2214     ---------------------
2215    
2216     This is purely a bug fixing release.
2217    
2218     1. If the pattern /((Z)+|A)*/ was matched agained ZABCDEFG it matched Z instead
2219     of ZA. This was just one example of several cases that could provoke this bug,
2220     which was introduced by change 9 of version 2.00. The code for breaking
2221     infinite loops after an iteration that matches an empty string was't working
2222     correctly.
2223    
2224     2. The pcretest program was not imitating Perl correctly for the pattern /a*/g
2225     when matched against abbab (for example). After matching an empty string, it
2226     wasn't forcing anchoring when setting PCRE_NOTEMPTY for the next attempt; this
2227     caused it to match further down the string than it should.
2228    
2229     3. The code contained an inclusion of sys/types.h. It isn't clear why this
2230     was there because it doesn't seem to be needed, and it causes trouble on some
2231     systems, as it is not a Standard C header. It has been removed.
2232    
2233     4. Made 4 silly changes to the source to avoid stupid compiler warnings that
2234     were reported on the Macintosh. The changes were from
2235    
2236     while ((c = *(++ptr)) != 0 && c != '\n');
2237     to
2238     while ((c = *(++ptr)) != 0 && c != '\n') ;
2239    
2240     Totally extraordinary, but if that's what it takes...
2241    
2242     5. PCRE is being used in one environment where neither memmove() nor bcopy() is
2243     available. Added HAVE_BCOPY and an autoconf test for it; if neither
2244     HAVE_MEMMOVE nor HAVE_BCOPY is set, use a built-in emulation function which
2245     assumes the way PCRE uses memmove() (always moving upwards).
2246    
2247     6. PCRE is being used in one environment where strchr() is not available. There
2248     was only one use in pcre.c, and writing it out to avoid strchr() probably gives
2249     faster code anyway.
2250    
2251    
2252 nigel 45 Version 3.1 09-Feb-00
2253     ---------------------
2254    
2255     The only change in this release is the fixing of some bugs in Makefile.in for
2256     the "install" target:
2257    
2258     (1) It was failing to install pcreposix.h.
2259    
2260     (2) It was overwriting the pcre.3 man page with the pcreposix.3 man page.
2261    
2262    
2263 nigel 43 Version 3.0 01-Feb-00
2264     ---------------------
2265 nigel 41
2266     1. Add support for the /+ modifier to perltest (to output $` like it does in
2267     pcretest).
2268    
2269     2. Add support for the /g modifier to perltest.
2270    
2271     3. Fix pcretest so that it behaves even more like Perl for /g when the pattern
2272     matches null strings.
2273    
2274     4. Fix perltest so that it doesn't do unwanted things when fed an empty
2275     pattern. Perl treats empty patterns specially - it reuses the most recent
2276     pattern, which is not what we want. Replace // by /(?#)/ in order to avoid this
2277     effect.
2278    
2279     5. The POSIX interface was broken in that it was just handing over the POSIX
2280     captured string vector to pcre_exec(), but (since release 2.00) PCRE has
2281     required a bigger vector, with some working space on the end. This means that
2282     the POSIX wrapper now has to get and free some memory, and copy the results.
2283    
2284 nigel 43 6. Added some simple autoconf support, placing the test data and the
2285     documentation in separate directories, re-organizing some of the
2286     information files, and making it build pcre-config (a GNU standard). Also added
2287     libtool support for building PCRE as a shared library, which is now the
2288     default.
2289 nigel 41
2290 nigel 43 7. Got rid of the leading zero in the definition of PCRE_MINOR because 08 and
2291     09 are not valid octal constants. Single digits will be used for minor values
2292     less than 10.
2293    
2294     8. Defined REG_EXTENDED and REG_NOSUB as zero in the POSIX header, so that
2295     existing programs that set these in the POSIX interface can use PCRE without
2296     modification.
2297    
2298     9. Added a new function, pcre_fullinfo() with an extensible interface. It can
2299     return all that pcre_info() returns, plus additional data. The pcre_info()
2300     function is retained for compatibility, but is considered to be obsolete.
2301    
2302     10. Added experimental recursion feature (?R) to handle one common case that
2303     Perl 5.6 will be able to do with (?p{...}).
2304    
2305     11. Added support for POSIX character classes like [:alpha:], which Perl is
2306     adopting.
2307    
2308    
2309 nigel 39 Version 2.08 31-Aug-99
2310     ----------------------
2311    
2312     1. When startoffset was not zero and the pattern began with ".*", PCRE was not
2313     trying to match at the startoffset position, but instead was moving forward to
2314     the next newline as if a previous match had failed.
2315    
2316     2. pcretest was not making use of PCRE_NOTEMPTY when repeating for /g and /G,
2317     and could get into a loop if a null string was matched other than at the start
2318     of the subject.
2319    
2320     3. Added definitions of PCRE_MAJOR and PCRE_MINOR to pcre.h so the version can
2321     be distinguished at compile time, and for completeness also added PCRE_DATE.
2322    
2323     5. Added Paul Sokolovsky's minor changes to make it easy to compile a Win32 DLL
2324     in GnuWin32 environments.
2325    
2326    
2327 nigel 37 Version 2.07 29-Jul-99
2328     ----------------------
2329    
2330     1. The documentation is now supplied in plain text form and HTML as well as in
2331     the form of man page sources.
2332    
2333     2. C++ compilers don't like assigning (void *) values to other pointer types.
2334     In particular this affects malloc(). Although there is no problem in Standard
2335     C, I've put in casts to keep C++ compilers happy.
2336    
2337     3. Typo on pcretest.c; a cast of (unsigned char *) in the POSIX regexec() call
2338     should be (const char *).
2339    
2340     4. If NOPOSIX is defined, pcretest.c compiles without POSIX support. This may
2341     be useful for non-Unix systems who don't want to bother with the POSIX stuff.
2342     However, I haven't made this a standard facility. The documentation doesn't
2343     mention it, and the Makefile doesn't support it.
2344    
2345     5. The Makefile now contains an "install" target, with editable destinations at
2346     the top of the file. The pcretest program is not installed.
2347    
2348     6. pgrep -V now gives the PCRE version number and date.
2349    
2350     7. Fixed bug: a zero repetition after a literal string (e.g. /abcde{0}/) was
2351     causing the entire string to be ignored, instead of just the last character.
2352    
2353     8. If a pattern like /"([^\\"]+|\\.)*"/ is applied in the normal way to a
2354     non-matching string, it can take a very, very long time, even for strings of
2355     quite modest length, because of the nested recursion. PCRE now does better in
2356     some of these cases. It does this by remembering the last required literal
2357     character in the pattern, and pre-searching the subject to ensure it is present
2358     before running the real match. In other words, it applies a heuristic to detect
2359     some types of certain failure quickly, and in the above example, if presented
2360     with a string that has no trailing " it gives "no match" very quickly.
2361    
2362     9. A new runtime option PCRE_NOTEMPTY causes null string matches to be ignored;
2363     other alternatives are tried instead.
2364    
2365    
2366 nigel 35 Version 2.06 09-Jun-99
2367     ----------------------
2368    
2369     1. Change pcretest's output for amount of store used to show just the code
2370     space, because the remainder (the data block) varies in size between 32-bit and
2371     64-bit systems.
2372    
2373     2. Added an extra argument to pcre_exec() to supply an offset in the subject to
2374     start matching at. This allows lookbehinds to work when searching for multiple
2375     occurrences in a string.
2376    
2377     3. Added additional options to pcretest for testing multiple occurrences:
2378    
2379     /+ outputs the rest of the string that follows a match
2380     /g loops for multiple occurrences, using the new startoffset argument
2381     /G loops for multiple occurrences by passing an incremented pointer
2382    
2383     4. PCRE wasn't doing the "first character" optimization for patterns starting
2384     with \b or \B, though it was doing it for other lookbehind assertions. That is,
2385     it wasn't noticing that a match for a pattern such as /\bxyz/ has to start with
2386     the letter 'x'. On long subject strings, this gives a significant speed-up.
2387    
2388    
2389 nigel 33 Version 2.05 21-Apr-99
2390     ----------------------
2391    
2392     1. Changed the type of magic_number from int to long int so that it works
2393     properly on 16-bit systems.
2394    
2395     2. Fixed a bug which caused patterns starting with .* not to work correctly
2396     when the subject string contained newline characters. PCRE was assuming
2397     anchoring for such patterns in all cases, which is not correct because .* will
2398     not pass a newline unless PCRE_DOTALL is set. It now assumes anchoring only if
2399     DOTALL is set at top level; otherwise it knows that patterns starting with .*
2400     must be retried after every newline in the subject.
2401    
2402    
2403 nigel 31 Version 2.04 18-Feb-99
2404     ----------------------
2405    
2406     1. For parenthesized subpatterns with repeats whose minimum was zero, the
2407     computation of the store needed to hold the pattern was incorrect (too large).
2408     If such patterns were nested a few deep, this could multiply and become a real
2409     problem.
2410    
2411     2. Added /M option to pcretest to show the memory requirement of a specific
2412     pattern. Made -m a synonym of -s (which does this globally) for compatibility.
2413    
2414     3. Subpatterns of the form (regex){n,m} (i.e. limited maximum) were being
2415     compiled in such a way that the backtracking after subsequent failure was
2416     pessimal. Something like (a){0,3} was compiled as (a)?(a)?(a)? instead of
2417     ((a)((a)(a)?)?)? with disastrous performance if the maximum was of any size.
2418    
2419    
2420 nigel 29 Version 2.03 02-Feb-99
2421     ----------------------
2422    
2423     1. Fixed typo and small mistake in man page.
2424    
2425 nigel 31 2. Added 4th condition (GPL supersedes if conflict) and created separate
2426     LICENCE file containing the conditions.
2427 nigel 29
2428     3. Updated pcretest so that patterns such as /abc\/def/ work like they do in
2429     Perl, that is the internal \ allows the delimiter to be included in the
2430     pattern. Locked out the use of \ as a delimiter. If \ immediately follows
2431     the final delimiter, add \ to the end of the pattern (to test the error).
2432    
2433     4. Added the convenience functions for extracting substrings after a successful
2434     match. Updated pcretest to make it able to test these functions.
2435    
2436    
2437 nigel 27 Version 2.02 14-Jan-99
2438     ----------------------
2439    
2440     1. Initialized the working variables associated with each extraction so that
2441     their saving and restoring doesn't refer to uninitialized store.
2442    
2443     2. Put dummy code into study.c in order to trick the optimizer of the IBM C
2444     compiler for OS/2 into generating correct code. Apparently IBM isn't going to
2445     fix the problem.
2446    
2447     3. Pcretest: the timing code wasn't using LOOPREPEAT for timing execution
2448     calls, and wasn't printing the correct value for compiling calls. Increased the
2449     default value of LOOPREPEAT, and the number of significant figures in the
2450     times.
2451    
2452     4. Changed "/bin/rm" in the Makefile to "-rm" so it works on Windows NT.
2453    
2454     5. Renamed "deftables" as "dftables" to get it down to 8 characters, to avoid
2455     a building problem on Windows NT with a FAT file system.
2456    
2457    
2458 nigel 25 Version 2.01 21-Oct-98
2459     ----------------------
2460    
2461     1. Changed the API for pcre_compile() to allow for the provision of a pointer
2462     to character tables built by pcre_maketables() in the current locale. If NULL
2463     is passed, the default tables are used.
2464    
2465    
2466 nigel 23 Version 2.00 24-Sep-98
2467 nigel 21 ----------------------
2468    
2469 nigel 23 1. Since the (>?) facility is in Perl 5.005, don't require PCRE_EXTRA to enable
2470     it any more.
2471    
2472     2. Allow quantification of (?>) groups, and make it work correctly.
2473    
2474     3. The first character computation wasn't working for (?>) groups.
2475    
2476     4. Correct the implementation of \Z (it is permitted to match on the \n at the
2477     end of the subject) and add 5.005's \z, which really does match only at the
2478     very end of the subject.
2479    
2480     5. Remove the \X "cut" facility; Perl doesn't have it, and (?> is neater.
2481    
2482     6. Remove the ability to specify CASELESS, MULTILINE, DOTALL, and
2483     DOLLAR_END_ONLY at runtime, to make it possible to implement the Perl 5.005
2484     localized options. All options to pcre_study() were also removed.
2485    
2486     7. Add other new features from 5.005:
2487    
2488     $(?<= positive lookbehind
2489     $(?<! negative lookbehind
2490     (?imsx-imsx) added the unsetting capability
2491     such a setting is global if at outer level; local otherwise
2492     (?imsx-imsx:) non-capturing groups with option setting
2493     (?(cond)re|re) conditional pattern matching
2494    
2495     A backreference to itself in a repeated group matches the previous
2496     captured string.
2497    
2498     8. General tidying up of studying (both automatic and via "study")
2499     consequential on the addition of new assertions.
2500    
2501     9. As in 5.005, unlimited repeated groups that could match an empty substring
2502     are no longer faulted at compile time. Instead, the loop is forcibly broken at
2503     runtime if any iteration does actually match an empty substring.
2504    
2505     10. Include the RunTest script in the distribution.
2506    
2507     11. Added tests from the Perl 5.005_02 distribution. This showed up a few
2508     discrepancies, some of which were old and were also with respect to 5.004. They
2509     have now been fixed.
2510    
2511    
2512     Version 1.09 28-Apr-98
2513     ----------------------
2514    
2515 nigel 21 1. A negated single character class followed by a quantifier with a minimum
2516     value of one (e.g. [^x]{1,6} ) was not compiled correctly. This could lead to
2517     program crashes, or just wrong answers. This did not apply to negated classes
2518     containing more than one character, or to minima other than one.
2519    
2520    
2521 nigel 19 Version 1.08 27-Mar-98
2522     ----------------------
2523    
2524     1. Add PCRE_UNGREEDY to invert the greediness of quantifiers.
2525    
2526     2. Add (?U) and (?X) to set PCRE_UNGREEDY and PCRE_EXTRA respectively. The
2527     latter must appear before anything that relies on it in the pattern.
2528    
2529    
2530 nigel 17 Version 1.07 16-Feb-98
2531     ----------------------
2532    
2533     1. A pattern such as /((a)*)*/ was not being diagnosed as in error (unlimited
2534     repeat of a potentially empty string).
2535    
2536    
2537 nigel 15 Version 1.06 23-Jan-98
2538     ----------------------
2539    
2540     1. Added Markus Oberhumer's little patches for C++.
2541    
2542     2. Literal strings longer than 255 characters were broken.
2543    
2544    
2545 nigel 13 Version 1.05 23-Dec-97
2546     ----------------------
2547    
2548     1. Negated character classes containing more than one character were failing if
2549     PCRE_CASELESS was set at run time.
2550    
2551    
2552 nigel 11 Version 1.04 19-Dec-97
2553     ----------------------
2554    
2555     1. Corrected the man page, where some "const" qualifiers had been omitted.
2556    
2557     2. Made debugging output print "{0,xxx}" instead of just "{,xxx}" to agree with
2558     input syntax.
2559    
2560     3. Fixed memory leak which occurred when a regex with back references was
2561     matched with an offsets vector that wasn't big enough. The temporary memory
2562     that is used in this case wasn't being freed if the match failed.
2563    
2564     4. Tidied pcretest to ensure it frees memory that it gets.
2565    
2566     5. Temporary memory was being obtained in the case where the passed offsets
2567     vector was exactly big enough.
2568    
2569     6. Corrected definition of offsetof() from change 5 below.
2570    
2571     7. I had screwed up change 6 below and broken the rules for the use of
2572     setjmp(). Now fixed.
2573    
2574    
2575 nigel 9 Version 1.03 18-Dec-97
2576     ----------------------
2577    
2578     1. A erroneous regex with a missing opening parenthesis was correctly
2579     diagnosed, but PCRE attempted to access brastack[-1], which could cause crashes
2580     on some systems.
2581    
2582     2. Replaced offsetof(real_pcre, code) by offsetof(real_pcre, code[0]) because
2583     it was reported that one broken compiler failed on the former because "code" is
2584     also an independent variable.
2585    
2586     3. The erroneous regex a[]b caused an array overrun reference.
2587    
2588     4. A regex ending with a one-character negative class (e.g. /[^k]$/) did not
2589     fail on data ending with that character. (It was going on too far, and checking
2590     the next character, typically a binary zero.) This was specific to the
2591     optimized code for single-character negative classes.
2592    
2593     5. Added a contributed patch from the TIN world which does the following:
2594    
2595     + Add an undef for memmove, in case the the system defines a macro for it.
2596    
2597     + Add a definition of offsetof(), in case there isn't one. (I don't know
2598     the reason behind this - offsetof() is part of the ANSI standard - but
2599     it does no harm).
2600    
2601     + Reduce the ifdef's in pcre.c using macro DPRINTF, thereby eliminating
2602     most of the places where whitespace preceded '#'. I have given up and
2603     allowed the remaining 2 cases to be at the margin.
2604    
2605     + Rename some variables in pcre to eliminate shadowing. This seems very
2606     pedantic, but does no harm, of course.
2607    
2608     6. Moved the call to setjmp() into its own function, to get rid of warnings
2609     from gcc -Wall, and avoided calling it at all unless PCRE_EXTRA is used.
2610    
2611     7. Constructs such as \d{8,} were compiling into the equivalent of
2612 nigel 11 \d{8}\d{0,65527} instead of \d{8}\d* which didn't make much difference to the
2613 nigel 9 outcome, but in this particular case used more store than had been allocated,
2614     which caused the bug to be discovered because it threw up an internal error.
2615    
2616     8. The debugging code in both pcre and pcretest for outputting the compiled
2617     form of a regex was going wrong in the case of back references followed by
2618     curly-bracketed repeats.
2619    
2620    
2621 nigel 7 Version 1.02 12-Dec-97
2622     ----------------------
2623    
2624     1. Typos in pcre.3 and comments in the source fixed.
2625    
2626     2. Applied a contributed patch to get rid of places where it used to remove
2627     'const' from variables, and fixed some signed/unsigned and uninitialized
2628     variable warnings.
2629    
2630     3. Added the "runtest" target to Makefile.
2631    
2632     4. Set default compiler flag to -O2 rather than just -O.
2633    
2634    
2635 nigel 5 Version 1.01 19-Nov-97
2636     ----------------------
2637    
2638     1. PCRE was failing to diagnose unlimited repeat of empty string for patterns
2639     like /([ab]*)*/, that is, for classes with more than one character in them.
2640    
2641     2. Likewise, it wasn't diagnosing patterns with "once-only" subpatterns, such
2642     as /((?>a*))*/ (a PCRE_EXTRA facility).
2643    
2644    
2645     Version 1.00 18-Nov-97
2646     ----------------------
2647    
2648     1. Added compile-time macros to support systems such as SunOS4 which don't have
2649     memmove() or strerror() but have other things that can be used instead.
2650    
2651     2. Arranged that "make clean" removes the executables.
2652    
2653    
2654 nigel 3 Version 0.99 27-Oct-97
2655     ----------------------
2656    
2657     1. Fixed bug in code for optimizing classes with only one character. It was
2658     initializing a 32-byte map regardless, which could cause it to run off the end
2659     of the memory it had got.
2660    
2661     2. Added, conditional on PCRE_EXTRA, the proposed (?>REGEX) construction.
2662    
2663    
2664     Version 0.98 22-Oct-97
2665     ----------------------
2666    
2667     1. Fixed bug in code for handling temporary memory usage when there are more
2668     back references than supplied space in the ovector. This could cause segfaults.
2669    
2670    
2671     Version 0.97 21-Oct-97
2672     ----------------------
2673    
2674     1. Added the \X "cut" facility, conditional on PCRE_EXTRA.
2675    
2676     2. Optimized negated single characters not to use a bit map.
2677    
2678     3. Brought error texts together as macro definitions; clarified some of them;
2679     fixed one that was wrong - it said "range out of order" when it meant "invalid
2680     escape sequence".
2681    
2682     4. Changed some char * arguments to const char *.
2683    
2684     5. Added PCRE_NOTBOL and PCRE_NOTEOL (from POSIX).
2685    
2686     6. Added the POSIX-style API wrapper in pcreposix.a and testing facilities in
2687     pcretest.
2688    
2689    
2690     Version 0.96 16-Oct-97
2691     ----------------------
2692    
2693     1. Added a simple "pgrep" utility to the distribution.
2694    
2695     2. Fixed an incompatibility with Perl: "{" is now treated as a normal character
2696     unless it appears in one of the precise forms "{ddd}", "{ddd,}", or "{ddd,ddd}"
2697     where "ddd" means "one or more decimal digits".
2698    
2699     3. Fixed serious bug. If a pattern had a back reference, but the call to
2700     pcre_exec() didn't supply a large enough ovector to record the related
2701     identifying subpattern, the match always failed. PCRE now remembers the number
2702     of the largest back reference, and gets some temporary memory in which to save
2703     the offsets during matching if necessary, in order to ensure that
2704     backreferences always work.
2705    
2706     4. Increased the compatibility with Perl in a number of ways:
2707    
2708     (a) . no longer matches \n by default; an option PCRE_DOTALL is provided
2709     to request this handling. The option can be set at compile or exec time.
2710    
2711     (b) $ matches before a terminating newline by default; an option
2712     PCRE_DOLLAR_ENDONLY is provided to override this (but not in multiline
2713     mode). The option can be set at compile or exec time.
2714    
2715     (c) The handling of \ followed by a digit other than 0 is now supposed to be
2716     the same as Perl's. If the decimal number it represents is less than 10
2717     or there aren't that many previous left capturing parentheses, an octal
2718     escape is read. Inside a character class, it's always an octal escape,
2719     even if it is a single digit.
2720    
2721     (d) An escaped but undefined alphabetic character is taken as a literal,
2722     unless PCRE_EXTRA is set. Currently this just reserves the remaining
2723     escapes.
2724    
2725     (e) {0} is now permitted. (The previous item is removed from the compiled
2726     pattern).
2727    
2728     5. Changed all the names of code files so that the basic parts are no longer
2729     than 10 characters, and abolished the teeny "globals.c" file.
2730    
2731     6. Changed the handling of character classes; they are now done with a 32-byte
2732     bit map always.
2733    
2734     7. Added the -d and /D options to pcretest to make it possible to look at the
2735     internals of compilation without having to recompile pcre.
2736    
2737    
2738     Version 0.95 23-Sep-97
2739     ----------------------
2740    
2741     1. Fixed bug in pre-pass concerning escaped "normal" characters such as \x5c or
2742     \x20 at the start of a run of normal characters. These were being treated as
2743     real characters, instead of the source characters being re-checked.
2744    
2745    
2746     Version 0.94 18-Sep-97
2747     ----------------------
2748    
2749     1. The functions are now thread-safe, with the caveat that the global variables
2750     containing pointers to malloc() and free() or alternative functions are the
2751     same for all threads.
2752    
2753     2. Get pcre_study() to generate a bitmap of initial characters for non-
2754     anchored patterns when this is possible, and use it if passed to pcre_exec().
2755    
2756    
2757     Version 0.93 15-Sep-97
2758     ----------------------
2759    
2760     1. /(b)|(:+)/ was computing an incorrect first character.
2761    
2762     2. Add pcre_study() to the API and the passing of pcre_extra to pcre_exec(),
2763     but not actually doing anything yet.
2764    
2765     3. Treat "-" characters in classes that cannot be part of ranges as literals,
2766     as Perl does (e.g. [-az] or [az-]).
2767    
2768     4. Set the anchored flag if a branch starts with .* or .*? because that tests
2769     all possible positions.
2770    
2771     5. Split up into different modules to avoid including unneeded functions in a
2772     compiled binary. However, compile and exec are still in one module. The "study"
2773     function is split off.
2774    
2775     6. The character tables are now in a separate module whose source is generated
2776     by an auxiliary program - but can then be edited by hand if required. There are
2777     now no calls to isalnum(), isspace(), isdigit(), isxdigit(), tolower() or
2778     toupper() in the code.
2779    
2780     7. Turn the malloc/free funtions variables into pcre_malloc and pcre_free and
2781     make them global. Abolish the function for setting them, as the caller can now
2782     set them directly.
2783    
2784    
2785     Version 0.92 11-Sep-97
2786     ----------------------
2787    
2788     1. A repeat with a fixed maximum and a minimum of 1 for an ordinary character
2789     (e.g. /a{1,3}/) was broken (I mis-optimized it).
2790    
2791     2. Caseless matching was not working in character classes if the characters in
2792     the pattern were in upper case.
2793    
2794     3. Make ranges like [W-c] work in the same way as Perl for caseless matching.
2795    
2796     4. Make PCRE_ANCHORED public and accept as a compile option.
2797    
2798     5. Add an options word to pcre_exec() and accept PCRE_ANCHORED and
2799     PCRE_CASELESS at run time. Add escapes \A and \I to pcretest to cause it to
2800     pass them.
2801    
2802     6. Give an error if bad option bits passed at compile or run time.
2803    
2804     7. Add PCRE_MULTILINE at compile and exec time, and (?m) as well. Add \M to
2805     pcretest to cause it to pass that flag.
2806    
2807     8. Add pcre_info(), to get the number of identifying subpatterns, the stored
2808     options, and the first character, if set.
2809    
2810     9. Recognize C+ or C{n,m} where n >= 1 as providing a fixed starting character.
2811    
2812    
2813     Version 0.91 10-Sep-97
2814     ----------------------
2815    
2816     1. PCRE was failing to diagnose unlimited repeats of subpatterns that could
2817     match the empty string as in /(a*)*/. It was looping and ultimately crashing.
2818    
2819     2. PCRE was looping on encountering an indefinitely repeated back reference to
2820     a subpattern that had matched an empty string, e.g. /(a|)\1*/. It now does what
2821     Perl does - treats the match as successful.
2822    
2823     ****

Properties

Name Value
svn:eol-style native
svn:keywords "Author Date Id Revision Url"

webmaster@exim.org
ViewVC Help
Powered by ViewVC 1.1.12