/[pcre]/code/trunk/ChangeLog
ViewVC logotype

Contents of /code/trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 189 - (hide annotations) (download)
Thu Jul 5 11:50:49 2007 UTC (7 years, 3 months ago) by ph10
File size: 130580 byte(s)
Change #include <pcre.h> to #include "pcre.h" in pcre_internal.h (an error that 
crept in at 7.1).

1 nigel 3 ChangeLog for PCRE
2     ------------------
3    
4 ph10 189 Version 7.3 05-Jul-07
5 ph10 157 ---------------------
6    
7 ph10 189 1. In the rejigging of the build system that eventually resulted in 7.1, the
8     line "#include <pcre.h>" was included in pcre_internal.h. The use of angle
9     brackets there is not right, since it causes compilers to look for an
10     installed pcre.h, not the version that is in the source that is being
11     compiled (which of course may be different). I have changed it back to:
12    
13     #include "pcre.h"
14    
15     I have a vague recollection that the change was concerned with compiling in
16     different directories, but in the new build system, that is taken care of
17     by the VPATH setting the Makefile.
18    
19    
20    
21     Version 7.2 19-Jun-07
22     ---------------------
23    
24 ph10 157 1. If the fr_FR locale cannot be found for test 3, try the "french" locale,
25     which is apparently normally available under Windows.
26 ph10 159
27     2. Re-jig the pcregrep tests with different newline settings in an attempt
28     to make them independent of the local environment's newline setting.
29 ph10 157
30 ph10 160 3. Add code to configure.ac to remove -g from the CFLAGS default settings.
31 ph10 165
32 ph10 161 4. Some of the "internals" tests were previously cut out when the link size
33     was not 2, because the output contained actual offsets. The recent new
34 ph10 165 "Z" feature of pcretest means that these can be cut out, making the tests
35     usable with all link sizes.
36    
37 ph10 164 5. Implemented Stan Switzer's goto replacement for longjmp() when not using
38     stack recursion. This gives a massive performance boost under BSD, but just
39 ph10 165 a small improvement under Linux. However, it saves one field in the frame
40 ph10 164 in all cases.
41 ph10 172
42 ph10 166 6. Added more features from the forthcoming Perl 5.10:
43 ph10 172
44 ph10 166 (a) (?-n) (where n is a string of digits) is a relative subroutine or
45     recursion call. It refers to the nth most recently opened parentheses.
46 ph10 172
47 ph10 166 (b) (?+n) is also a relative subroutine call; it refers to the nth next
48 ph10 172 to be opened parentheses.
49    
50     (c) Conditions that refer to capturing parentheses can be specified
51 ph10 167 relatively, for example, (?(-2)... or (?(+3)...
52 ph10 172
53 ph10 168 (d) \K resets the start of the current match so that everything before
54 ph10 172 is not part of it.
55    
56 ph10 171 (e) \k{name} is synonymous with \k<name> and \k'name' (.NET compatible).
57 ph10 172
58 ph10 171 (f) \g{name} is another synonym - part of Perl 5.10's unification of
59 ph10 172 reference syntax.
60 ph10 182
61 ph10 175 (g) (?| introduces a group in which the numbering of parentheses in each
62 ph10 182 alternative starts with the same number.
63 ph10 172
64 ph10 182 (h) \h, \H, \v, and \V match horizontal and vertical whitespace.
65    
66 ph10 172 7. Added two new calls to pcre_fullinfo(): PCRE_INFO_OKPARTIAL and
67     PCRE_INFO_JCHANGED.
68    
69     8. A pattern such as (.*(.)?)* caused pcre_exec() to fail by either not
70     terminating or by crashing. Diagnosed by Viktor Griph; it was in the code
71 ph10 170 for detecting groups that can match an empty string.
72 ph10 159
73 ph10 172 9. A pattern with a very large number of alternatives (more than several
74     hundred) was running out of internal workspace during the pre-compile
75     phase, where pcre_compile() figures out how much memory will be needed. A
76     bit of new cunning has reduced the workspace needed for groups with
77     alternatives. The 1000-alternative test pattern now uses 12 bytes of
78     workspace instead of running out of the 4096 that are available.
79 ph10 182
80 ph10 176 10. Inserted some missing (unsigned int) casts to get rid of compiler warnings.
81 ph10 172
82 ph10 179 11. Applied patch from Google to remove an optimization that didn't quite work.
83     The report of the bug said:
84 ph10 182
85 ph10 179 pcrecpp::RE("a*").FullMatch("aaa") matches, while
86     pcrecpp::RE("a*?").FullMatch("aaa") does not, and
87 ph10 182 pcrecpp::RE("a*?\\z").FullMatch("aaa") does again.
88 ph10 185
89 ph10 184 12. If \p or \P was used in non-UTF-8 mode on a character greater than 127
90 ph10 185 it matched the wrong number of bytes.
91 ph10 172
92 ph10 179
93 ph10 155 Version 7.1 24-Apr-07
94 ph10 98 ---------------------
95    
96 ph10 111 1. Applied Bob Rossi and Daniel G's patches to convert the build system to one
97 ph10 122 that is more "standard", making use of automake and other Autotools. There
98 ph10 99 is some re-arrangement of the files and adjustment of comments consequent
99     on this.
100 ph10 111
101     2. Part of the patch fixed a problem with the pcregrep tests. The test of -r
102     for recursive directory scanning broke on some systems because the files
103     are not scanned in any specific order and on different systems the order
104     was different. A call to "sort" has been inserted into RunGrepTest for the
105     approprate test as a short-term fix. In the longer term there may be an
106 ph10 100 alternative.
107 ph10 111
108 ph10 100 3. I had an email from Eric Raymond about problems translating some of PCRE's
109 ph10 111 man pages to HTML (despite the fact that I distribute HTML pages, some
110     people do their own conversions for various reasons). The problems
111     concerned the use of low-level troff macros .br and .in. I have therefore
112     removed all such uses from the man pages (some were redundant, some could
113 ph10 113 be replaced by .nf/.fi pairs). The 132html script that I use to generate
114     HTML has been updated to handle .nf/.fi and to complain if it encounters
115     .br or .in.
116 ph10 111
117 ph10 100 4. Updated comments in configure.ac that get placed in config.h.in and also
118 ph10 123 arranged for config.h to be included in the distribution, with the name
119 ph10 111 config.h.generic, for the benefit of those who have to compile without
120     Autotools (compare pcre.h, which is now distributed as pcre.h.generic).
121    
122     5. Updated the support (such as it is) for Virtual Pascal, thanks to Stefan
123     Weber: (1) pcre_internal.h was missing some function renames; (2) updated
124 ph10 127 makevp.bat for the current PCRE, using the additional files
125 ph10 135 makevp_c.txt, makevp_l.txt, and pcregexp.pas.
126 ph10 111
127     6. A Windows user reported a minor discrepancy with test 2, which turned out
128     to be caused by a trailing space on an input line that had got lost in his
129 ph10 102 copy. The trailing space was an accident, so I've just removed it.
130 ph10 111
131 ph10 104 7. Add -Wl,-R... flags in pcre-config.in for *BSD* systems, as I'm told
132 ph10 111 that is needed.
133    
134 ph10 105 8. Mark ucp_table (in ucptable.h) and ucp_gentype (in pcre_ucp_searchfuncs.c)
135     as "const" (a) because they are and (b) because it helps the PHP
136     maintainers who have recently made a script to detect big data structures
137 ph10 111 in the php code that should be moved to the .rodata section. I remembered
138     to update Builducptable as well, so it won't revert if ucptable.h is ever
139 ph10 105 re-created.
140 ph10 111
141     9. Added some extra #ifdef SUPPORT_UTF8 conditionals into pcretest.c,
142 ph10 107 pcre_printint.src, pcre_compile.c, pcre_study.c, and pcre_tables.c, in
143 ph10 111 order to be able to cut out the UTF-8 tables in the latter when UTF-8
144     support is not required. This saves 1.5-2K of code, which is important in
145 ph10 107 some applications.
146 ph10 111
147 ph10 110 Later: more #ifdefs are needed in pcre_ord2utf8.c and pcre_valid_utf8.c
148 ph10 111 so as not to refer to the tables, even though these functions will never be
149     called when UTF-8 support is disabled. Otherwise there are problems with a
150     shared library.
151    
152 ph10 118 10. Fixed two bugs in the emulated memmove() function in pcre_internal.h:
153    
154     (a) It was defining its arguments as char * instead of void *.
155    
156 ph10 123 (b) It was assuming that all moves were upwards in memory; this was true
157     a long time ago when I wrote it, but is no longer the case.
158    
159 ph10 118 The emulated memove() is provided for those environments that have neither
160 ph10 123 memmove() nor bcopy(). I didn't think anyone used it these days, but that
161 ph10 118 is clearly not the case, as these two bugs were recently reported.
162 ph10 123
163 ph10 111 11. The script PrepareRelease is now distributed: it calls 132html, CleanTxt,
164 ph10 123 and Detrail to create the HTML documentation, the .txt form of the man
165     pages, and it removes trailing spaces from listed files. It also creates
166     pcre.h.generic and config.h.generic from pcre.h and config.h. In the latter
167     case, it wraps all the #defines with #ifndefs. This script should be run
168 ph10 111 before "make dist".
169 ph10 123
170 ph10 115 12. Fixed two fairly obscure bugs concerned with quantified caseless matching
171     with Unicode property support.
172 ph10 123
173     (a) For a maximizing quantifier, if the two different cases of the
174     character were of different lengths in their UTF-8 codings (there are
175     some cases like this - I found 11), and the matching function had to
176 ph10 115 back up over a mixture of the two cases, it incorrectly assumed they
177     were both the same length.
178 ph10 123
179     (b) When PCRE was configured to use the heap rather than the stack for
180     recursion during matching, it was not correctly preserving the data for
181     the other case of a UTF-8 character when checking ahead for a match
182     while processing a minimizing repeat. If the check also involved
183 ph10 115 matching a wide character, but failed, corruption could cause an
184     erroneous result when trying to check for a repeat of the original
185     character.
186 ph10 123
187 ph10 116 13. Some tidying changes to the testing mechanism:
188 ph10 98
189 ph10 116 (a) The RunTest script now detects the internal link size and whether there
190     is UTF-8 and UCP support by running ./pcretest -C instead of relying on
191 ph10 123 values substituted by "configure". (The RunGrepTest script already did
192     this for UTF-8.) The configure.ac script no longer substitutes the
193     relevant variables.
194    
195 ph10 116 (b) The debugging options /B and /D in pcretest show the compiled bytecode
196     with length and offset values. This means that the output is different
197     for different internal link sizes. Test 2 is skipped for link sizes
198     other than 2 because of this, bypassing the problem. Unfortunately,
199     there was also a test in test 3 (the locale tests) that used /B and
200 ph10 123 failed for link sizes other than 2. Rather than cut the whole test out,
201     I have added a new /Z option to pcretest that replaces the length and
202     offset values with spaces. This is now used to make test 3 independent
203 ph10 122 of link size. (Test 2 will be tidied up later.)
204 ph10 123
205     14. If erroroffset was passed as NULL to pcre_compile, it provoked a
206 ph10 122 segmentation fault instead of returning the appropriate error message.
207 ph10 134
208 ph10 131 15. In multiline mode when the newline sequence was set to "any", the pattern
209 ph10 134 ^$ would give a match between the \r and \n of a subject such as "A\r\nB".
210     This doesn't seem right; it now treats the CRLF combination as the line
211     ending, and so does not match in that case. It's only a pattern such as ^$
212     that would hit this one: something like ^ABC$ would have failed after \r
213     and then tried again after \r\n.
214    
215 ph10 131 16. Changed the comparison command for RunGrepTest from "diff -u" to "diff -ub"
216 ph10 134 in an attempt to make files that differ only in their line terminators
217     compare equal. This works on Linux.
218 ph10 142
219 ph10 141 17. Under certain error circumstances pcregrep might try to free random memory
220     as it exited. This is now fixed, thanks to valgrind.
221 ph10 142
222 ph10 141 19. In pcretest, if the pattern /(?m)^$/g<any> was matched against the string
223 ph10 142 "abc\r\n\r\n", it found an unwanted second match after the second \r. This
224     was because its rules for how to advance for /g after matching an empty
225 ph10 143 string at the end of a line did not allow for this case. They now check for
226     it specially.
227 ph10 150
228     20. pcretest is supposed to handle patterns and data of any length, by
229     extending its buffers when necessary. It was getting this wrong when the
230 ph10 147 buffer for a data line had to be extended.
231 ph10 150
232 ph10 149 21. Added PCRE_NEWLINE_ANYCRLF which is like ANY, but matches only CR, LF, or
233 ph10 150 CRLF as a newline sequence.
234 ph10 152
235 ph10 151 22. Code for handling Unicode properties in pcre_dfa_exec() wasn't being cut
236 ph10 152 out by #ifdef SUPPORT_UCP. This did no harm, as it could never be used, but
237     I have nevertheless tidied it up.
238 ph10 111
239 ph10 152 23. Added some casts to kill warnings from HP-UX ia64 compiler.
240 ph10 123
241 ph10 153 24. Added a man page for pcre-config.
242 ph10 152
243 ph10 153
244 nigel 93 Version 7.0 19-Dec-06
245     ---------------------
246    
247     1. Fixed a signed/unsigned compiler warning in pcre_compile.c, shown up by
248     moving to gcc 4.1.1.
249    
250     2. The -S option for pcretest uses setrlimit(); I had omitted to #include
251     sys/time.h, which is documented as needed for this function. It doesn't
252     seem to matter on Linux, but it showed up on some releases of OS X.
253    
254     3. It seems that there are systems where bytes whose values are greater than
255     127 match isprint() in the "C" locale. The "C" locale should be the
256     default when a C program starts up. In most systems, only ASCII printing
257     characters match isprint(). This difference caused the output from pcretest
258     to vary, making some of the tests fail. I have changed pcretest so that:
259    
260     (a) When it is outputting text in the compiled version of a pattern, bytes
261     other than 32-126 are always shown as hex escapes.
262    
263     (b) When it is outputting text that is a matched part of a subject string,
264     it does the same, unless a different locale has been set for the match
265     (using the /L modifier). In this case, it uses isprint() to decide.
266    
267     4. Fixed a major bug that caused incorrect computation of the amount of memory
268     required for a compiled pattern when options that changed within the
269     pattern affected the logic of the preliminary scan that determines the
270     length. The relevant options are -x, and -i in UTF-8 mode. The result was
271     that the computed length was too small. The symptoms of this bug were
272     either the PCRE error "internal error: code overflow" from pcre_compile(),
273     or a glibc crash with a message such as "pcretest: free(): invalid next
274     size (fast)". Examples of patterns that provoked this bug (shown in
275     pcretest format) are:
276    
277     /(?-x: )/x
278     /(?x)(?-x: \s*#\s*)/
279     /((?i)[\x{c0}])/8
280     /(?i:[\x{c0}])/8
281    
282     HOWEVER: Change 17 below makes this fix obsolete as the memory computation
283     is now done differently.
284    
285     5. Applied patches from Google to: (a) add a QuoteMeta function to the C++
286     wrapper classes; (b) implement a new function in the C++ scanner that is
287     more efficient than the old way of doing things because it avoids levels of
288     recursion in the regex matching; (c) add a paragraph to the documentation
289     for the FullMatch() function.
290    
291     6. The escape sequence \n was being treated as whatever was defined as
292     "newline". Not only was this contrary to the documentation, which states
293     that \n is character 10 (hex 0A), but it also went horribly wrong when
294     "newline" was defined as CRLF. This has been fixed.
295    
296     7. In pcre_dfa_exec.c the value of an unsigned integer (the variable called c)
297     was being set to -1 for the "end of line" case (supposedly a value that no
298     character can have). Though this value is never used (the check for end of
299     line is "zero bytes in current character"), it caused compiler complaints.
300     I've changed it to 0xffffffff.
301    
302     8. In pcre_version.c, the version string was being built by a sequence of
303     C macros that, in the event of PCRE_PRERELEASE being defined as an empty
304     string (as it is for production releases) called a macro with an empty
305     argument. The C standard says the result of this is undefined. The gcc
306     compiler treats it as an empty string (which was what was wanted) but it is
307     reported that Visual C gives an error. The source has been hacked around to
308     avoid this problem.
309    
310     9. On the advice of a Windows user, included <io.h> and <fcntl.h> in Windows
311     builds of pcretest, and changed the call to _setmode() to use _O_BINARY
312     instead of 0x8000. Made all the #ifdefs test both _WIN32 and WIN32 (not all
313     of them did).
314    
315     10. Originally, pcretest opened its input and output without "b"; then I was
316     told that "b" was needed in some environments, so it was added for release
317     5.0 to both the input and output. (It makes no difference on Unix-like
318     systems.) Later I was told that it is wrong for the input on Windows. I've
319     now abstracted the modes into two macros, to make it easier to fiddle with
320     them, and removed "b" from the input mode under Windows.
321    
322     11. Added pkgconfig support for the C++ wrapper library, libpcrecpp.
323    
324     12. Added -help and --help to pcretest as an official way of being reminded
325     of the options.
326    
327     13. Removed some redundant semicolons after macro calls in pcrecpparg.h.in
328     and pcrecpp.cc because they annoy compilers at high warning levels.
329    
330     14. A bit of tidying/refactoring in pcre_exec.c in the main bumpalong loop.
331    
332     15. Fixed an occurrence of == in configure.ac that should have been = (shell
333     scripts are not C programs :-) and which was not noticed because it works
334     on Linux.
335    
336     16. pcretest is supposed to handle any length of pattern and data line (as one
337     line or as a continued sequence of lines) by extending its input buffer if
338     necessary. This feature was broken for very long pattern lines, leading to
339     a string of junk being passed to pcre_compile() if the pattern was longer
340     than about 50K.
341    
342     17. I have done a major re-factoring of the way pcre_compile() computes the
343     amount of memory needed for a compiled pattern. Previously, there was code
344     that made a preliminary scan of the pattern in order to do this. That was
345     OK when PCRE was new, but as the facilities have expanded, it has become
346     harder and harder to keep it in step with the real compile phase, and there
347     have been a number of bugs (see for example, 4 above). I have now found a
348     cunning way of running the real compile function in a "fake" mode that
349     enables it to compute how much memory it would need, while actually only
350     ever using a few hundred bytes of working memory and without too many
351     tests of the mode. This should make future maintenance and development
352     easier. A side effect of this work is that the limit of 200 on the nesting
353     depth of parentheses has been removed (though this was never a serious
354     limitation, I suspect). However, there is a downside: pcre_compile() now
355     runs more slowly than before (30% or more, depending on the pattern). I
356     hope this isn't a big issue. There is no effect on runtime performance.
357    
358     18. Fixed a minor bug in pcretest: if a pattern line was not terminated by a
359     newline (only possible for the last line of a file) and it was a
360     pattern that set a locale (followed by /Lsomething), pcretest crashed.
361    
362     19. Added additional timing features to pcretest. (1) The -tm option now times
363     matching only, not compiling. (2) Both -t and -tm can be followed, as a
364     separate command line item, by a number that specifies the number of
365     repeats to use when timing. The default is 50000; this gives better
366     precision, but takes uncomfortably long for very large patterns.
367    
368     20. Extended pcre_study() to be more clever in cases where a branch of a
369     subpattern has no definite first character. For example, (a*|b*)[cd] would
370     previously give no result from pcre_study(). Now it recognizes that the
371     first character must be a, b, c, or d.
372    
373     21. There was an incorrect error "recursive call could loop indefinitely" if
374     a subpattern (or the entire pattern) that was being tested for matching an
375     empty string contained only one non-empty item after a nested subpattern.
376     For example, the pattern (?>\x{100}*)\d(?R) provoked this error
377     incorrectly, because the \d was being skipped in the check.
378    
379     22. The pcretest program now has a new pattern option /B and a command line
380     option -b, which is equivalent to adding /B to every pattern. This causes
381     it to show the compiled bytecode, without the additional information that
382     -d shows. The effect of -d is now the same as -b with -i (and similarly, /D
383     is the same as /B/I).
384    
385     23. A new optimization is now able automatically to treat some sequences such
386     as a*b as a*+b. More specifically, if something simple (such as a character
387     or a simple class like \d) has an unlimited quantifier, and is followed by
388     something that cannot possibly match the quantified thing, the quantifier
389     is automatically "possessified".
390    
391     24. A recursive reference to a subpattern whose number was greater than 39
392     went wrong under certain circumstances in UTF-8 mode. This bug could also
393     have affected the operation of pcre_study().
394    
395     25. Realized that a little bit of performance could be had by replacing
396     (c & 0xc0) == 0xc0 with c >= 0xc0 when processing UTF-8 characters.
397    
398     26. Timing data from pcretest is now shown to 4 decimal places instead of 3.
399    
400     27. Possessive quantifiers such as a++ were previously implemented by turning
401     them into atomic groups such as ($>a+). Now they have their own opcodes,
402     which improves performance. This includes the automatically created ones
403     from 23 above.
404    
405     28. A pattern such as (?=(\w+))\1: which simulates an atomic group using a
406     lookahead was broken if it was not anchored. PCRE was mistakenly expecting
407     the first matched character to be a colon. This applied both to named and
408     numbered groups.
409    
410     29. The ucpinternal.h header file was missing its idempotency #ifdef.
411    
412     30. I was sent a "project" file called libpcre.a.dev which I understand makes
413     building PCRE on Windows easier, so I have included it in the distribution.
414    
415     31. There is now a check in pcretest against a ridiculously large number being
416     returned by pcre_exec() or pcre_dfa_exec(). If this happens in a /g or /G
417     loop, the loop is abandoned.
418    
419     32. Forward references to subpatterns in conditions such as (?(2)...) where
420     subpattern 2 is defined later cause pcre_compile() to search forwards in
421     the pattern for the relevant set of parentheses. This search went wrong
422     when there were unescaped parentheses in a character class, parentheses
423     escaped with \Q...\E, or parentheses in a #-comment in /x mode.
424    
425     33. "Subroutine" calls and backreferences were previously restricted to
426     referencing subpatterns earlier in the regex. This restriction has now
427     been removed.
428    
429     34. Added a number of extra features that are going to be in Perl 5.10. On the
430     whole, these are just syntactic alternatives for features that PCRE had
431     previously implemented using the Python syntax or my own invention. The
432     other formats are all retained for compatibility.
433    
434     (a) Named groups can now be defined as (?<name>...) or (?'name'...) as well
435     as (?P<name>...). The new forms, as well as being in Perl 5.10, are
436     also .NET compatible.
437    
438     (b) A recursion or subroutine call to a named group can now be defined as
439     (?&name) as well as (?P>name).
440    
441     (c) A backreference to a named group can now be defined as \k<name> or
442     \k'name' as well as (?P=name). The new forms, as well as being in Perl
443     5.10, are also .NET compatible.
444    
445     (d) A conditional reference to a named group can now use the syntax
446     (?(<name>) or (?('name') as well as (?(name).
447    
448     (e) A "conditional group" of the form (?(DEFINE)...) can be used to define
449     groups (named and numbered) that are never evaluated inline, but can be
450     called as "subroutines" from elsewhere. In effect, the DEFINE condition
451     is always false. There may be only one alternative in such a group.
452    
453     (f) A test for recursion can be given as (?(R1).. or (?(R&name)... as well
454     as the simple (?(R). The condition is true only if the most recent
455     recursion is that of the given number or name. It does not search out
456     through the entire recursion stack.
457    
458     (g) The escape \gN or \g{N} has been added, where N is a positive or
459     negative number, specifying an absolute or relative reference.
460    
461     35. Tidied to get rid of some further signed/unsigned compiler warnings and
462     some "unreachable code" warnings.
463    
464     36. Updated the Unicode property tables to Unicode version 5.0.0. Amongst other
465     things, this adds five new scripts.
466    
467     37. Perl ignores orphaned \E escapes completely. PCRE now does the same.
468     There were also incompatibilities regarding the handling of \Q..\E inside
469     character classes, for example with patterns like [\Qa\E-\Qz\E] where the
470     hyphen was adjacent to \Q or \E. I hope I've cleared all this up now.
471    
472     38. Like Perl, PCRE detects when an indefinitely repeated parenthesized group
473     matches an empty string, and forcibly breaks the loop. There were bugs in
474     this code in non-simple cases. For a pattern such as ^(a()*)* matched
475     against aaaa the result was just "a" rather than "aaaa", for example. Two
476     separate and independent bugs (that affected different cases) have been
477     fixed.
478    
479     39. Refactored the code to abolish the use of different opcodes for small
480     capturing bracket numbers. This is a tidy that I avoided doing when I
481     removed the limit on the number of capturing brackets for 3.5 back in 2001.
482     The new approach is not only tidier, it makes it possible to reduce the
483     memory needed to fix the previous bug (38).
484    
485     40. Implemented PCRE_NEWLINE_ANY to recognize any of the Unicode newline
486     sequences (http://unicode.org/unicode/reports/tr18/) as "newline" when
487     processing dot, circumflex, or dollar metacharacters, or #-comments in /x
488     mode.
489    
490     41. Add \R to match any Unicode newline sequence, as suggested in the Unicode
491     report.
492    
493     42. Applied patch, originally from Ari Pollak, modified by Google, to allow
494     copy construction and assignment in the C++ wrapper.
495    
496     43. Updated pcregrep to support "--newline=any". In the process, I fixed a
497     couple of bugs that could have given wrong results in the "--newline=crlf"
498     case.
499    
500     44. Added a number of casts and did some reorganization of signed/unsigned int
501     variables following suggestions from Dair Grant. Also renamed the variable
502     "this" as "item" because it is a C++ keyword.
503    
504     45. Arranged for dftables to add
505    
506     #include "pcre_internal.h"
507    
508     to pcre_chartables.c because without it, gcc 4.x may remove the array
509     definition from the final binary if PCRE is built into a static library and
510     dead code stripping is activated.
511    
512     46. For an unanchored pattern, if a match attempt fails at the start of a
513     newline sequence, and the newline setting is CRLF or ANY, and the next two
514     characters are CRLF, advance by two characters instead of one.
515    
516    
517 nigel 91 Version 6.7 04-Jul-06
518     ---------------------
519    
520     1. In order to handle tests when input lines are enormously long, pcretest has
521     been re-factored so that it automatically extends its buffers when
522     necessary. The code is crude, but this _is_ just a test program. The
523     default size has been increased from 32K to 50K.
524    
525     2. The code in pcre_study() was using the value of the re argument before
526     testing it for NULL. (Of course, in any sensible call of the function, it
527     won't be NULL.)
528    
529     3. The memmove() emulation function in pcre_internal.h, which is used on
530     systems that lack both memmove() and bcopy() - that is, hardly ever -
531     was missing a "static" storage class specifier.
532    
533     4. When UTF-8 mode was not set, PCRE looped when compiling certain patterns
534     containing an extended class (one that cannot be represented by a bitmap
535     because it contains high-valued characters or Unicode property items, e.g.
536     [\pZ]). Almost always one would set UTF-8 mode when processing such a
537     pattern, but PCRE should not loop if you do not (it no longer does).
538     [Detail: two cases were found: (a) a repeated subpattern containing an
539     extended class; (b) a recursive reference to a subpattern that followed a
540     previous extended class. It wasn't skipping over the extended class
541     correctly when UTF-8 mode was not set.]
542    
543     5. A negated single-character class was not being recognized as fixed-length
544     in lookbehind assertions such as (?<=[^f]), leading to an incorrect
545     compile error "lookbehind assertion is not fixed length".
546    
547     6. The RunPerlTest auxiliary script was showing an unexpected difference
548     between PCRE and Perl for UTF-8 tests. It turns out that it is hard to
549     write a Perl script that can interpret lines of an input file either as
550     byte characters or as UTF-8, which is what "perltest" was being required to
551     do for the non-UTF-8 and UTF-8 tests, respectively. Essentially what you
552     can't do is switch easily at run time between having the "use utf8;" pragma
553     or not. In the end, I fudged it by using the RunPerlTest script to insert
554     "use utf8;" explicitly for the UTF-8 tests.
555    
556     7. In multiline (/m) mode, PCRE was matching ^ after a terminating newline at
557     the end of the subject string, contrary to the documentation and to what
558     Perl does. This was true of both matching functions. Now it matches only at
559     the start of the subject and immediately after *internal* newlines.
560    
561     8. A call of pcre_fullinfo() from pcretest to get the option bits was passing
562     a pointer to an int instead of a pointer to an unsigned long int. This
563     caused problems on 64-bit systems.
564    
565     9. Applied a patch from the folks at Google to pcrecpp.cc, to fix "another
566     instance of the 'standard' template library not being so standard".
567    
568     10. There was no check on the number of named subpatterns nor the maximum
569     length of a subpattern name. The product of these values is used to compute
570     the size of the memory block for a compiled pattern. By supplying a very
571     long subpattern name and a large number of named subpatterns, the size
572     computation could be caused to overflow. This is now prevented by limiting
573     the length of names to 32 characters, and the number of named subpatterns
574     to 10,000.
575    
576     11. Subpatterns that are repeated with specific counts have to be replicated in
577     the compiled pattern. The size of memory for this was computed from the
578     length of the subpattern and the repeat count. The latter is limited to
579     65535, but there was no limit on the former, meaning that integer overflow
580     could in principle occur. The compiled length of a repeated subpattern is
581     now limited to 30,000 bytes in order to prevent this.
582    
583     12. Added the optional facility to have named substrings with the same name.
584    
585     13. Added the ability to use a named substring as a condition, using the
586     Python syntax: (?(name)yes|no). This overloads (?(R)... and names that
587     are numbers (not recommended). Forward references are permitted.
588    
589     14. Added forward references in named backreferences (if you see what I mean).
590    
591     15. In UTF-8 mode, with the PCRE_DOTALL option set, a quantified dot in the
592     pattern could run off the end of the subject. For example, the pattern
593     "(?s)(.{1,5})"8 did this with the subject "ab".
594    
595     16. If PCRE_DOTALL or PCRE_MULTILINE were set, pcre_dfa_exec() behaved as if
596     PCRE_CASELESS was set when matching characters that were quantified with ?
597     or *.
598    
599     17. A character class other than a single negated character that had a minimum
600     but no maximum quantifier - for example [ab]{6,} - was not handled
601     correctly by pce_dfa_exec(). It would match only one character.
602    
603     18. A valid (though odd) pattern that looked like a POSIX character
604     class but used an invalid character after [ (for example [[,abc,]]) caused
605     pcre_compile() to give the error "Failed: internal error: code overflow" or
606     in some cases to crash with a glibc free() error. This could even happen if
607     the pattern terminated after [[ but there just happened to be a sequence of
608     letters, a binary zero, and a closing ] in the memory that followed.
609    
610     19. Perl's treatment of octal escapes in the range \400 to \777 has changed
611     over the years. Originally (before any Unicode support), just the bottom 8
612     bits were taken. Thus, for example, \500 really meant \100. Nowadays the
613     output from "man perlunicode" includes this:
614    
615     The regular expression compiler produces polymorphic opcodes. That
616     is, the pattern adapts to the data and automatically switches to
617     the Unicode character scheme when presented with Unicode data--or
618     instead uses a traditional byte scheme when presented with byte
619     data.
620    
621     Sadly, a wide octal escape does not cause a switch, and in a string with
622     no other multibyte characters, these octal escapes are treated as before.
623     Thus, in Perl, the pattern /\500/ actually matches \100 but the pattern
624     /\500|\x{1ff}/ matches \500 or \777 because the whole thing is treated as a
625     Unicode string.
626    
627     I have not perpetrated such confusion in PCRE. Up till now, it took just
628     the bottom 8 bits, as in old Perl. I have now made octal escapes with
629     values greater than \377 illegal in non-UTF-8 mode. In UTF-8 mode they
630     translate to the appropriate multibyte character.
631    
632     29. Applied some refactoring to reduce the number of warnings from Microsoft
633     and Borland compilers. This has included removing the fudge introduced
634     seven years ago for the OS/2 compiler (see 2.02/2 below) because it caused
635     a warning about an unused variable.
636    
637     21. PCRE has not included VT (character 0x0b) in the set of whitespace
638     characters since release 4.0, because Perl (from release 5.004) does not.
639     [Or at least, is documented not to: some releases seem to be in conflict
640     with the documentation.] However, when a pattern was studied with
641     pcre_study() and all its branches started with \s, PCRE still included VT
642     as a possible starting character. Of course, this did no harm; it just
643     caused an unnecessary match attempt.
644    
645     22. Removed a now-redundant internal flag bit that recorded the fact that case
646     dependency changed within the pattern. This was once needed for "required
647     byte" processing, but is no longer used. This recovers a now-scarce options
648     bit. Also moved the least significant internal flag bit to the most-
649     significant bit of the word, which was not previously used (hangover from
650     the days when it was an int rather than a uint) to free up another bit for
651     the future.
652    
653     23. Added support for CRLF line endings as well as CR and LF. As well as the
654     default being selectable at build time, it can now be changed at runtime
655     via the PCRE_NEWLINE_xxx flags. There are now options for pcregrep to
656     specify that it is scanning data with non-default line endings.
657    
658     24. Changed the definition of CXXLINK to make it agree with the definition of
659     LINK in the Makefile, by replacing LDFLAGS to CXXFLAGS.
660    
661     25. Applied Ian Taylor's patches to avoid using another stack frame for tail
662     recursions. This makes a big different to stack usage for some patterns.
663    
664     26. If a subpattern containing a named recursion or subroutine reference such
665     as (?P>B) was quantified, for example (xxx(?P>B)){3}, the calculation of
666     the space required for the compiled pattern went wrong and gave too small a
667     value. Depending on the environment, this could lead to "Failed: internal
668     error: code overflow at offset 49" or "glibc detected double free or
669     corruption" errors.
670    
671     27. Applied patches from Google (a) to support the new newline modes and (b) to
672     advance over multibyte UTF-8 characters in GlobalReplace.
673    
674     28. Change free() to pcre_free() in pcredemo.c. Apparently this makes a
675     difference for some implementation of PCRE in some Windows version.
676    
677     29. Added some extra testing facilities to pcretest:
678    
679     \q<number> in a data line sets the "match limit" value
680     \Q<number> in a data line sets the "match recursion limt" value
681     -S <number> sets the stack size, where <number> is in megabytes
682    
683     The -S option isn't available for Windows.
684    
685    
686 nigel 89 Version 6.6 06-Feb-06
687     ---------------------
688    
689     1. Change 16(a) for 6.5 broke things, because PCRE_DATA_SCOPE was not defined
690     in pcreposix.h. I have copied the definition from pcre.h.
691    
692     2. Change 25 for 6.5 broke compilation in a build directory out-of-tree
693     because pcre.h is no longer a built file.
694    
695     3. Added Jeff Friedl's additional debugging patches to pcregrep. These are
696     not normally included in the compiled code.
697    
698    
699 nigel 87 Version 6.5 01-Feb-06
700     ---------------------
701    
702     1. When using the partial match feature with pcre_dfa_exec(), it was not
703     anchoring the second and subsequent partial matches at the new starting
704     point. This could lead to incorrect results. For example, with the pattern
705     /1234/, partially matching against "123" and then "a4" gave a match.
706    
707     2. Changes to pcregrep:
708    
709     (a) All non-match returns from pcre_exec() were being treated as failures
710     to match the line. Now, unless the error is PCRE_ERROR_NOMATCH, an
711     error message is output. Some extra information is given for the
712     PCRE_ERROR_MATCHLIMIT and PCRE_ERROR_RECURSIONLIMIT errors, which are
713     probably the only errors that are likely to be caused by users (by
714     specifying a regex that has nested indefinite repeats, for instance).
715     If there are more than 20 of these errors, pcregrep is abandoned.
716    
717     (b) A binary zero was treated as data while matching, but terminated the
718     output line if it was written out. This has been fixed: binary zeroes
719     are now no different to any other data bytes.
720    
721     (c) Whichever of the LC_ALL or LC_CTYPE environment variables is set is
722     used to set a locale for matching. The --locale=xxxx long option has
723     been added (no short equivalent) to specify a locale explicitly on the
724     pcregrep command, overriding the environment variables.
725    
726     (d) When -B was used with -n, some line numbers in the output were one less
727     than they should have been.
728    
729     (e) Added the -o (--only-matching) option.
730    
731     (f) If -A or -C was used with -c (count only), some lines of context were
732     accidentally printed for the final match.
733    
734     (g) Added the -H (--with-filename) option.
735    
736     (h) The combination of options -rh failed to suppress file names for files
737     that were found from directory arguments.
738    
739     (i) Added the -D (--devices) and -d (--directories) options.
740    
741     (j) Added the -F (--fixed-strings) option.
742    
743     (k) Allow "-" to be used as a file name for -f as well as for a data file.
744    
745     (l) Added the --colo(u)r option.
746    
747     (m) Added Jeffrey Friedl's -S testing option, but within #ifdefs so that it
748     is not present by default.
749    
750     3. A nasty bug was discovered in the handling of recursive patterns, that is,
751     items such as (?R) or (?1), when the recursion could match a number of
752     alternatives. If it matched one of the alternatives, but subsequently,
753     outside the recursion, there was a failure, the code tried to back up into
754     the recursion. However, because of the way PCRE is implemented, this is not
755     possible, and the result was an incorrect result from the match.
756    
757     In order to prevent this happening, the specification of recursion has
758     been changed so that all such subpatterns are automatically treated as
759     atomic groups. Thus, for example, (?R) is treated as if it were (?>(?R)).
760    
761     4. I had overlooked the fact that, in some locales, there are characters for
762     which isalpha() is true but neither isupper() nor islower() are true. In
763     the fr_FR locale, for instance, the \xAA and \xBA characters (ordmasculine
764     and ordfeminine) are like this. This affected the treatment of \w and \W
765     when they appeared in character classes, but not when they appeared outside
766     a character class. The bit map for "word" characters is now created
767     separately from the results of isalnum() instead of just taking it from the
768     upper, lower, and digit maps. (Plus the underscore character, of course.)
769    
770     5. The above bug also affected the handling of POSIX character classes such as
771     [[:alpha:]] and [[:alnum:]]. These do not have their own bit maps in PCRE's
772     permanent tables. Instead, the bit maps for such a class were previously
773     created as the appropriate unions of the upper, lower, and digit bitmaps.
774     Now they are created by subtraction from the [[:word:]] class, which has
775     its own bitmap.
776    
777     6. The [[:blank:]] character class matches horizontal, but not vertical space.
778     It is created by subtracting the vertical space characters (\x09, \x0a,
779     \x0b, \x0c) from the [[:space:]] bitmap. Previously, however, the
780     subtraction was done in the overall bitmap for a character class, meaning
781     that a class such as [\x0c[:blank:]] was incorrect because \x0c would not
782     be recognized. This bug has been fixed.
783    
784     7. Patches from the folks at Google:
785    
786     (a) pcrecpp.cc: "to handle a corner case that may or may not happen in
787     real life, but is still worth protecting against".
788    
789     (b) pcrecpp.cc: "corrects a bug when negative radixes are used with
790     regular expressions".
791    
792     (c) pcre_scanner.cc: avoid use of std::count() because not all systems
793     have it.
794    
795     (d) Split off pcrecpparg.h from pcrecpp.h and had the former built by
796     "configure" and the latter not, in order to fix a problem somebody had
797     with compiling the Arg class on HP-UX.
798    
799     (e) Improve the error-handling of the C++ wrapper a little bit.
800    
801     (f) New tests for checking recursion limiting.
802    
803     8. The pcre_memmove() function, which is used only if the environment does not
804     have a standard memmove() function (and is therefore rarely compiled),
805     contained two bugs: (a) use of int instead of size_t, and (b) it was not
806     returning a result (though PCRE never actually uses the result).
807    
808     9. In the POSIX regexec() interface, if nmatch is specified as a ridiculously
809     large number - greater than INT_MAX/(3*sizeof(int)) - REG_ESPACE is
810     returned instead of calling malloc() with an overflowing number that would
811     most likely cause subsequent chaos.
812    
813     10. The debugging option of pcretest was not showing the NO_AUTO_CAPTURE flag.
814    
815     11. The POSIX flag REG_NOSUB is now supported. When a pattern that was compiled
816     with this option is matched, the nmatch and pmatch options of regexec() are
817     ignored.
818    
819     12. Added REG_UTF8 to the POSIX interface. This is not defined by POSIX, but is
820     provided in case anyone wants to the the POSIX interface with UTF-8
821     strings.
822    
823     13. Added CXXLDFLAGS to the Makefile parameters to provide settings only on the
824     C++ linking (needed for some HP-UX environments).
825    
826     14. Avoid compiler warnings in get_ucpname() when compiled without UCP support
827     (unused parameter) and in the pcre_printint() function (omitted "default"
828     switch label when the default is to do nothing).
829    
830     15. Added some code to make it possible, when PCRE is compiled as a C++
831     library, to replace subject pointers for pcre_exec() with a smart pointer
832     class, thus making it possible to process discontinuous strings.
833    
834     16. The two macros PCRE_EXPORT and PCRE_DATA_SCOPE are confusing, and perform
835     much the same function. They were added by different people who were trying
836     to make PCRE easy to compile on non-Unix systems. It has been suggested
837     that PCRE_EXPORT be abolished now that there is more automatic apparatus
838     for compiling on Windows systems. I have therefore replaced it with
839     PCRE_DATA_SCOPE. This is set automatically for Windows; if not set it
840     defaults to "extern" for C or "extern C" for C++, which works fine on
841     Unix-like systems. It is now possible to override the value of PCRE_DATA_
842     SCOPE with something explicit in config.h. In addition:
843    
844     (a) pcreposix.h still had just "extern" instead of either of these macros;
845     I have replaced it with PCRE_DATA_SCOPE.
846    
847     (b) Functions such as _pcre_xclass(), which are internal to the library,
848     but external in the C sense, all had PCRE_EXPORT in their definitions.
849     This is apparently wrong for the Windows case, so I have removed it.
850     (It makes no difference on Unix-like systems.)
851    
852     17. Added a new limit, MATCH_LIMIT_RECURSION, which limits the depth of nesting
853     of recursive calls to match(). This is different to MATCH_LIMIT because
854     that limits the total number of calls to match(), not all of which increase
855     the depth of recursion. Limiting the recursion depth limits the amount of
856     stack (or heap if NO_RECURSE is set) that is used. The default can be set
857     when PCRE is compiled, and changed at run time. A patch from Google adds
858     this functionality to the C++ interface.
859    
860     18. Changes to the handling of Unicode character properties:
861    
862     (a) Updated the table to Unicode 4.1.0.
863    
864     (b) Recognize characters that are not in the table as "Cn" (undefined).
865    
866     (c) I revised the way the table is implemented to a much improved format
867     which includes recognition of ranges. It now supports the ranges that
868     are defined in UnicodeData.txt, and it also amalgamates other
869     characters into ranges. This has reduced the number of entries in the
870     table from around 16,000 to around 3,000, thus reducing its size
871     considerably. I realized I did not need to use a tree structure after
872     all - a binary chop search is just as efficient. Having reduced the
873     number of entries, I extended their size from 6 bytes to 8 bytes to
874     allow for more data.
875    
876     (d) Added support for Unicode script names via properties such as \p{Han}.
877    
878     19. In UTF-8 mode, a backslash followed by a non-Ascii character was not
879     matching that character.
880    
881     20. When matching a repeated Unicode property with a minimum greater than zero,
882     (for example \pL{2,}), PCRE could look past the end of the subject if it
883     reached it while seeking the minimum number of characters. This could
884     happen only if some of the characters were more than one byte long, because
885     there is a check for at least the minimum number of bytes.
886    
887     21. Refactored the implementation of \p and \P so as to be more general, to
888     allow for more different types of property in future. This has changed the
889     compiled form incompatibly. Anybody with saved compiled patterns that use
890     \p or \P will have to recompile them.
891    
892     22. Added "Any" and "L&" to the supported property types.
893    
894     23. Recognize \x{...} as a code point specifier, even when not in UTF-8 mode,
895     but give a compile time error if the value is greater than 0xff.
896    
897     24. The man pages for pcrepartial, pcreprecompile, and pcre_compile2 were
898     accidentally not being installed or uninstalled.
899    
900     25. The pcre.h file was built from pcre.h.in, but the only changes that were
901     made were to insert the current release number. This seemed silly, because
902     it made things harder for people building PCRE on systems that don't run
903     "configure". I have turned pcre.h into a distributed file, no longer built
904     by "configure", with the version identification directly included. There is
905     no longer a pcre.h.in file.
906    
907     However, this change necessitated a change to the pcre-config script as
908     well. It is built from pcre-config.in, and one of the substitutions was the
909     release number. I have updated configure.ac so that ./configure now finds
910     the release number by grepping pcre.h.
911    
912     26. Added the ability to run the tests under valgrind.
913    
914    
915 nigel 85 Version 6.4 05-Sep-05
916     ---------------------
917    
918     1. Change 6.0/10/(l) to pcregrep introduced a bug that caused separator lines
919     "--" to be printed when multiple files were scanned, even when none of the
920     -A, -B, or -C options were used. This is not compatible with Gnu grep, so I
921     consider it to be a bug, and have restored the previous behaviour.
922    
923     2. A couple of code tidies to get rid of compiler warnings.
924    
925     3. The pcretest program used to cheat by referring to symbols in the library
926     whose names begin with _pcre_. These are internal symbols that are not
927     really supposed to be visible externally, and in some environments it is
928     possible to suppress them. The cheating is now confined to including
929     certain files from the library's source, which is a bit cleaner.
930    
931     4. Renamed pcre.in as pcre.h.in to go with pcrecpp.h.in; it also makes the
932     file's purpose clearer.
933    
934     5. Reorganized pcre_ucp_findchar().
935    
936    
937 nigel 83 Version 6.3 15-Aug-05
938     ---------------------
939    
940     1. The file libpcre.pc.in did not have general read permission in the tarball.
941    
942     2. There were some problems when building without C++ support:
943    
944     (a) If C++ support was not built, "make install" and "make test" still
945     tried to test it.
946    
947     (b) There were problems when the value of CXX was explicitly set. Some
948     changes have been made to try to fix these, and ...
949    
950     (c) --disable-cpp can now be used to explicitly disable C++ support.
951    
952     (d) The use of @CPP_OBJ@ directly caused a blank line preceded by a
953     backslash in a target when C++ was disabled. This confuses some
954     versions of "make", apparently. Using an intermediate variable solves
955     this. (Same for CPP_LOBJ.)
956    
957     3. $(LINK_FOR_BUILD) now includes $(CFLAGS_FOR_BUILD) and $(LINK)
958     (non-Windows) now includes $(CFLAGS) because these flags are sometimes
959     necessary on certain architectures.
960    
961     4. Added a setting of -export-symbols-regex to the link command to remove
962     those symbols that are exported in the C sense, but actually are local
963     within the library, and not documented. Their names all begin with
964     "_pcre_". This is not a perfect job, because (a) we have to except some
965     symbols that pcretest ("illegally") uses, and (b) the facility isn't always
966     available (and never for static libraries). I have made a note to try to
967     find a way round (a) in the future.
968    
969    
970 nigel 81 Version 6.2 01-Aug-05
971     ---------------------
972    
973     1. There was no test for integer overflow of quantifier values. A construction
974     such as {1111111111111111} would give undefined results. What is worse, if
975     a minimum quantifier for a parenthesized subpattern overflowed and became
976     negative, the calculation of the memory size went wrong. This could have
977     led to memory overwriting.
978    
979     2. Building PCRE using VPATH was broken. Hopefully it is now fixed.
980    
981     3. Added "b" to the 2nd argument of fopen() in dftables.c, for non-Unix-like
982     operating environments where this matters.
983    
984     4. Applied Giuseppe Maxia's patch to add additional features for controlling
985     PCRE options from within the C++ wrapper.
986    
987     5. Named capturing subpatterns were not being correctly counted when a pattern
988     was compiled. This caused two problems: (a) If there were more than 100
989     such subpatterns, the calculation of the memory needed for the whole
990     compiled pattern went wrong, leading to an overflow error. (b) Numerical
991     back references of the form \12, where the number was greater than 9, were
992     not recognized as back references, even though there were sufficient
993     previous subpatterns.
994    
995     6. Two minor patches to pcrecpp.cc in order to allow it to compile on older
996     versions of gcc, e.g. 2.95.4.
997    
998    
999 nigel 79 Version 6.1 21-Jun-05
1000     ---------------------
1001    
1002     1. There was one reference to the variable "posix" in pcretest.c that was not
1003     surrounded by "#if !defined NOPOSIX".
1004    
1005     2. Make it possible to compile pcretest without DFA support, UTF8 support, or
1006     the cross-check on the old pcre_info() function, for the benefit of the
1007     cut-down version of PCRE that is currently imported into Exim.
1008    
1009     3. A (silly) pattern starting with (?i)(?-i) caused an internal space
1010     allocation error. I've done the easy fix, which wastes 2 bytes for sensible
1011     patterns that start (?i) but I don't think that matters. The use of (?i) is
1012     just an example; this all applies to the other options as well.
1013    
1014     4. Since libtool seems to echo the compile commands it is issuing, the output
1015     from "make" can be reduced a bit by putting "@" in front of each libtool
1016     compile command.
1017    
1018     5. Patch from the folks at Google for configure.in to be a bit more thorough
1019     in checking for a suitable C++ installation before trying to compile the
1020     C++ stuff. This should fix a reported problem when a compiler was present,
1021     but no suitable headers.
1022    
1023     6. The man pages all had just "PCRE" as their title. I have changed them to
1024     be the relevant file name. I have also arranged that these names are
1025     retained in the file doc/pcre.txt, which is a concatenation in text format
1026     of all the man pages except the little individual ones for each function.
1027    
1028     7. The NON-UNIX-USE file had not been updated for the different set of source
1029     files that come with release 6. I also added a few comments about the C++
1030     wrapper.
1031    
1032    
1033 nigel 77 Version 6.0 07-Jun-05
1034     ---------------------
1035    
1036     1. Some minor internal re-organization to help with my DFA experiments.
1037    
1038     2. Some missing #ifdef SUPPORT_UCP conditionals in pcretest and printint that
1039     didn't matter for the library itself when fully configured, but did matter
1040     when compiling without UCP support, or within Exim, where the ucp files are
1041     not imported.
1042    
1043     3. Refactoring of the library code to split up the various functions into
1044     different source modules. The addition of the new DFA matching code (see
1045     below) to a single monolithic source would have made it really too
1046     unwieldy, quite apart from causing all the code to be include in a
1047     statically linked application, when only some functions are used. This is
1048     relevant even without the DFA addition now that patterns can be compiled in
1049     one application and matched in another.
1050    
1051     The downside of splitting up is that there have to be some external
1052     functions and data tables that are used internally in different modules of
1053     the library but which are not part of the API. These have all had their
1054     names changed to start with "_pcre_" so that they are unlikely to clash
1055     with other external names.
1056    
1057     4. Added an alternate matching function, pcre_dfa_exec(), which matches using
1058     a different (DFA) algorithm. Although it is slower than the original
1059     function, it does have some advantages for certain types of matching
1060     problem.
1061    
1062     5. Upgrades to pcretest in order to test the features of pcre_dfa_exec(),
1063     including restarting after a partial match.
1064    
1065     6. A patch for pcregrep that defines INVALID_FILE_ATTRIBUTES if it is not
1066     defined when compiling for Windows was sent to me. I have put it into the
1067     code, though I have no means of testing or verifying it.
1068    
1069     7. Added the pcre_refcount() auxiliary function.
1070    
1071     8. Added the PCRE_FIRSTLINE option. This constrains an unanchored pattern to
1072     match before or at the first newline in the subject string. In pcretest,
1073     the /f option on a pattern can be used to set this.
1074    
1075     9. A repeated \w when used in UTF-8 mode with characters greater than 256
1076     would behave wrongly. This has been present in PCRE since release 4.0.
1077    
1078     10. A number of changes to the pcregrep command:
1079    
1080     (a) Refactored how -x works; insert ^(...)$ instead of setting
1081     PCRE_ANCHORED and checking the length, in preparation for adding
1082     something similar for -w.
1083    
1084     (b) Added the -w (match as a word) option.
1085    
1086     (c) Refactored the way lines are read and buffered so as to have more
1087     than one at a time available.
1088    
1089     (d) Implemented a pcregrep test script.
1090    
1091     (e) Added the -M (multiline match) option. This allows patterns to match
1092     over several lines of the subject. The buffering ensures that at least
1093     8K, or the rest of the document (whichever is the shorter) is available
1094     for matching (and similarly the previous 8K for lookbehind assertions).
1095    
1096     (f) Changed the --help output so that it now says
1097    
1098     -w, --word-regex(p)
1099    
1100     instead of two lines, one with "regex" and the other with "regexp"
1101     because that confused at least one person since the short forms are the
1102     same. (This required a bit of code, as the output is generated
1103     automatically from a table. It wasn't just a text change.)
1104    
1105     (g) -- can be used to terminate pcregrep options if the next thing isn't an
1106     option but starts with a hyphen. Could be a pattern or a path name
1107     starting with a hyphen, for instance.
1108    
1109     (h) "-" can be given as a file name to represent stdin.
1110    
1111     (i) When file names are being printed, "(standard input)" is used for
1112     the standard input, for compatibility with GNU grep. Previously
1113     "<stdin>" was used.
1114    
1115     (j) The option --label=xxx can be used to supply a name to be used for
1116     stdin when file names are being printed. There is no short form.
1117    
1118     (k) Re-factored the options decoding logic because we are going to add
1119     two more options that take data. Such options can now be given in four
1120     different ways, e.g. "-fname", "-f name", "--file=name", "--file name".
1121    
1122     (l) Added the -A, -B, and -C options for requesting that lines of context
1123     around matches be printed.
1124    
1125     (m) Added the -L option to print the names of files that do not contain
1126     any matching lines, that is, the complement of -l.
1127    
1128     (n) The return code is 2 if any file cannot be opened, but pcregrep does
1129     continue to scan other files.
1130    
1131     (o) The -s option was incorrectly implemented. For compatibility with other
1132     greps, it now suppresses the error message for a non-existent or non-
1133     accessible file (but not the return code). There is a new option called
1134     -q that suppresses the output of matching lines, which was what -s was
1135     previously doing.
1136    
1137     (p) Added --include and --exclude options to specify files for inclusion
1138     and exclusion when recursing.
1139    
1140     11. The Makefile was not using the Autoconf-supported LDFLAGS macro properly.
1141     Hopefully, it now does.
1142    
1143     12. Missing cast in pcre_study().
1144    
1145     13. Added an "uninstall" target to the makefile.
1146    
1147     14. Replaced "extern" in the function prototypes in Makefile.in with
1148     "PCRE_DATA_SCOPE", which defaults to 'extern' or 'extern "C"' in the Unix
1149     world, but is set differently for Windows.
1150    
1151     15. Added a second compiling function called pcre_compile2(). The only
1152     difference is that it has an extra argument, which is a pointer to an
1153     integer error code. When there is a compile-time failure, this is set
1154     non-zero, in addition to the error test pointer being set to point to an
1155     error message. The new argument may be NULL if no error number is required
1156     (but then you may as well call pcre_compile(), which is now just a
1157     wrapper). This facility is provided because some applications need a
1158     numeric error indication, but it has also enabled me to tidy up the way
1159     compile-time errors are handled in the POSIX wrapper.
1160    
1161     16. Added VPATH=.libs to the makefile; this should help when building with one
1162     prefix path and installing with another. (Or so I'm told by someone who
1163     knows more about this stuff than I do.)
1164    
1165     17. Added a new option, REG_DOTALL, to the POSIX function regcomp(). This
1166     passes PCRE_DOTALL to the pcre_compile() function, making the "." character
1167     match everything, including newlines. This is not POSIX-compatible, but
1168     somebody wanted the feature. From pcretest it can be activated by using
1169     both the P and the s flags.
1170    
1171     18. AC_PROG_LIBTOOL appeared twice in Makefile.in. Removed one.
1172    
1173     19. libpcre.pc was being incorrectly installed as executable.
1174    
1175     20. A couple of places in pcretest check for end-of-line by looking for '\n';
1176     it now also looks for '\r' so that it will work unmodified on Windows.
1177    
1178     21. Added Google's contributed C++ wrapper to the distribution.
1179    
1180     22. Added some untidy missing memory free() calls in pcretest, to keep
1181     Electric Fence happy when testing.
1182    
1183    
1184    
1185 nigel 75 Version 5.0 13-Sep-04
1186     ---------------------
1187    
1188     1. Internal change: literal characters are no longer packed up into items
1189     containing multiple characters in a single byte-string. Each character
1190     is now matched using a separate opcode. However, there may be more than one
1191     byte in the character in UTF-8 mode.
1192    
1193     2. The pcre_callout_block structure has two new fields: pattern_position and
1194     next_item_length. These contain the offset in the pattern to the next match
1195     item, and its length, respectively.
1196    
1197     3. The PCRE_AUTO_CALLOUT option for pcre_compile() requests the automatic
1198     insertion of callouts before each pattern item. Added the /C option to
1199     pcretest to make use of this.
1200    
1201     4. On the advice of a Windows user, the lines
1202    
1203     #if defined(_WIN32) || defined(WIN32)
1204     _setmode( _fileno( stdout ), 0x8000 );
1205     #endif /* defined(_WIN32) || defined(WIN32) */
1206    
1207     have been added to the source of pcretest. This apparently does useful
1208     magic in relation to line terminators.
1209    
1210     5. Changed "r" and "w" in the calls to fopen() in pcretest to "rb" and "wb"
1211     for the benefit of those environments where the "b" makes a difference.
1212    
1213     6. The icc compiler has the same options as gcc, but "configure" doesn't seem
1214     to know about it. I have put a hack into configure.in that adds in code
1215     to set GCC=yes if CC=icc. This seems to end up at a point in the
1216     generated configure script that is early enough to affect the setting of
1217     compiler options, which is what is needed, but I have no means of testing
1218     whether it really works. (The user who reported this had patched the
1219     generated configure script, which of course I cannot do.)
1220    
1221     LATER: After change 22 below (new libtool files), the configure script
1222     seems to know about icc (and also ecc). Therefore, I have commented out
1223     this hack in configure.in.
1224    
1225     7. Added support for pkg-config (2 patches were sent in).
1226    
1227     8. Negated POSIX character classes that used a combination of internal tables
1228     were completely broken. These were [[:^alpha:]], [[:^alnum:]], and
1229     [[:^ascii]]. Typically, they would match almost any characters. The other
1230     POSIX classes were not broken in this way.
1231    
1232     9. Matching the pattern "\b.*?" against "ab cd", starting at offset 1, failed
1233     to find the match, as PCRE was deluded into thinking that the match had to
1234     start at the start point or following a newline. The same bug applied to
1235     patterns with negative forward assertions or any backward assertions
1236     preceding ".*" at the start, unless the pattern required a fixed first
1237     character. This was a failing pattern: "(?!.bcd).*". The bug is now fixed.
1238    
1239     10. In UTF-8 mode, when moving forwards in the subject after a failed match
1240     starting at the last subject character, bytes beyond the end of the subject
1241     string were read.
1242    
1243     11. Renamed the variable "class" as "classbits" to make life easier for C++
1244     users. (Previously there was a macro definition, but it apparently wasn't
1245     enough.)
1246    
1247     12. Added the new field "tables" to the extra data so that tables can be passed
1248     in at exec time, or the internal tables can be re-selected. This allows
1249     a compiled regex to be saved and re-used at a later time by a different
1250     program that might have everything at different addresses.
1251    
1252     13. Modified the pcre-config script so that, when run on Solaris, it shows a
1253     -R library as well as a -L library.
1254    
1255     14. The debugging options of pcretest (-d on the command line or D on a
1256     pattern) showed incorrect output for anything following an extended class
1257     that contained multibyte characters and which was followed by a quantifier.
1258    
1259     15. Added optional support for general category Unicode character properties
1260     via the \p, \P, and \X escapes. Unicode property support implies UTF-8
1261     support. It adds about 90K to the size of the library. The meanings of the
1262     inbuilt class escapes such as \d and \s have NOT been changed.
1263    
1264     16. Updated pcredemo.c to include calls to free() to release the memory for the
1265     compiled pattern.
1266    
1267     17. The generated file chartables.c was being created in the source directory
1268     instead of in the building directory. This caused the build to fail if the
1269     source directory was different from the building directory, and was
1270     read-only.
1271    
1272     18. Added some sample Win commands from Mark Tetrode into the NON-UNIX-USE
1273     file. No doubt somebody will tell me if they don't make sense... Also added
1274     Dan Mooney's comments about building on OpenVMS.
1275    
1276     19. Added support for partial matching via the PCRE_PARTIAL option for
1277     pcre_exec() and the \P data escape in pcretest.
1278    
1279     20. Extended pcretest with 3 new pattern features:
1280    
1281     (i) A pattern option of the form ">rest-of-line" causes pcretest to
1282     write the compiled pattern to the file whose name is "rest-of-line".
1283     This is a straight binary dump of the data, with the saved pointer to
1284     the character tables forced to be NULL. The study data, if any, is
1285     written too. After writing, pcretest reads a new pattern.
1286    
1287     (ii) If, instead of a pattern, "<rest-of-line" is given, pcretest reads a
1288     compiled pattern from the given file. There must not be any
1289     occurrences of "<" in the file name (pretty unlikely); if there are,
1290     pcretest will instead treat the initial "<" as a pattern delimiter.
1291     After reading in the pattern, pcretest goes on to read data lines as
1292     usual.
1293    
1294     (iii) The F pattern option causes pcretest to flip the bytes in the 32-bit
1295     and 16-bit fields in a compiled pattern, to simulate a pattern that
1296     was compiled on a host of opposite endianness.
1297    
1298     21. The pcre-exec() function can now cope with patterns that were compiled on
1299     hosts of opposite endianness, with this restriction:
1300    
1301     As for any compiled expression that is saved and used later, the tables
1302     pointer field cannot be preserved; the extra_data field in the arguments
1303     to pcre_exec() should be used to pass in a tables address if a value
1304     other than the default internal tables were used at compile time.
1305    
1306     22. Calling pcre_exec() with a negative value of the "ovecsize" parameter is
1307     now diagnosed as an error. Previously, most of the time, a negative number
1308     would have been treated as zero, but if in addition "ovector" was passed as
1309     NULL, a crash could occur.
1310    
1311     23. Updated the files ltmain.sh, config.sub, config.guess, and aclocal.m4 with
1312     new versions from the libtool 1.5 distribution (the last one is a copy of
1313     a file called libtool.m4). This seems to have fixed the need to patch
1314     "configure" to support Darwin 1.3 (which I used to do). However, I still
1315     had to patch ltmain.sh to ensure that ${SED} is set (it isn't on my
1316     workstation).
1317    
1318     24. Changed the PCRE licence to be the more standard "BSD" licence.
1319    
1320    
1321 nigel 73 Version 4.5 01-Dec-03
1322     ---------------------
1323    
1324     1. There has been some re-arrangement of the code for the match() function so
1325     that it can be compiled in a version that does not call itself recursively.
1326     Instead, it keeps those local variables that need separate instances for
1327     each "recursion" in a frame on the heap, and gets/frees frames whenever it
1328     needs to "recurse". Keeping track of where control must go is done by means
1329     of setjmp/longjmp. The whole thing is implemented by a set of macros that
1330     hide most of the details from the main code, and operates only if
1331     NO_RECURSE is defined while compiling pcre.c. If PCRE is built using the
1332     "configure" mechanism, "--disable-stack-for-recursion" turns on this way of
1333     operating.
1334    
1335     To make it easier for callers to provide specially tailored get/free
1336     functions for this usage, two new functions, pcre_stack_malloc, and
1337     pcre_stack_free, are used. They are always called in strict stacking order,
1338     and the size of block requested is always the same.
1339    
1340     The PCRE_CONFIG_STACKRECURSE info parameter can be used to find out whether
1341     PCRE has been compiled to use the stack or the heap for recursion. The
1342     -C option of pcretest uses this to show which version is compiled.
1343    
1344     A new data escape \S, is added to pcretest; it causes the amounts of store
1345     obtained and freed by both kinds of malloc/free at match time to be added
1346     to the output.
1347    
1348     2. Changed the locale test to use "fr_FR" instead of "fr" because that's
1349     what's available on my current Linux desktop machine.
1350    
1351     3. When matching a UTF-8 string, the test for a valid string at the start has
1352     been extended. If start_offset is not zero, PCRE now checks that it points
1353     to a byte that is the start of a UTF-8 character. If not, it returns
1354     PCRE_ERROR_BADUTF8_OFFSET (-11). Note: the whole string is still checked;
1355     this is necessary because there may be backward assertions in the pattern.
1356     When matching the same subject several times, it may save resources to use
1357     PCRE_NO_UTF8_CHECK on all but the first call if the string is long.
1358    
1359     4. The code for checking the validity of UTF-8 strings has been tightened so
1360     that it rejects (a) strings containing 0xfe or 0xff bytes and (b) strings
1361     containing "overlong sequences".
1362    
1363     5. Fixed a bug (appearing twice) that I could not find any way of exploiting!
1364     I had written "if ((digitab[*p++] && chtab_digit) == 0)" where the "&&"
1365     should have been "&", but it just so happened that all the cases this let
1366     through by mistake were picked up later in the function.
1367    
1368     6. I had used a variable called "isblank" - this is a C99 function, causing
1369     some compilers to warn. To avoid this, I renamed it (as "blankclass").
1370    
1371     7. Cosmetic: (a) only output another newline at the end of pcretest if it is
1372     prompting; (b) run "./pcretest /dev/null" at the start of the test script
1373     so the version is shown; (c) stop "make test" echoing "./RunTest".
1374    
1375     8. Added patches from David Burgess to enable PCRE to run on EBCDIC systems.
1376    
1377     9. The prototype for memmove() for systems that don't have it was using
1378     size_t, but the inclusion of the header that defines size_t was later. I've
1379     moved the #includes for the C headers earlier to avoid this.
1380    
1381     10. Added some adjustments to the code to make it easier to compiler on certain
1382     special systems:
1383    
1384     (a) Some "const" qualifiers were missing.
1385     (b) Added the macro EXPORT before all exported functions; by default this
1386     is defined to be empty.
1387     (c) Changed the dftables auxiliary program (that builds chartables.c) so
1388     that it reads its output file name as an argument instead of writing
1389     to the standard output and assuming this can be redirected.
1390    
1391     11. In UTF-8 mode, if a recursive reference (e.g. (?1)) followed a character
1392     class containing characters with values greater than 255, PCRE compilation
1393     went into a loop.
1394    
1395     12. A recursive reference to a subpattern that was within another subpattern
1396     that had a minimum quantifier of zero caused PCRE to crash. For example,
1397     (x(y(?2))z)? provoked this bug with a subject that got as far as the
1398     recursion. If the recursively-called subpattern itself had a zero repeat,
1399     that was OK.
1400    
1401     13. In pcretest, the buffer for reading a data line was set at 30K, but the
1402     buffer into which it was copied (for escape processing) was still set at
1403     1024, so long lines caused crashes.
1404    
1405     14. A pattern such as /[ab]{1,3}+/ failed to compile, giving the error
1406     "internal error: code overflow...". This applied to any character class
1407     that was followed by a possessive quantifier.
1408    
1409     15. Modified the Makefile to add libpcre.la as a prerequisite for
1410     libpcreposix.la because I was told this is needed for a parallel build to
1411     work.
1412    
1413     16. If a pattern that contained .* following optional items at the start was
1414     studied, the wrong optimizing data was generated, leading to matching
1415     errors. For example, studying /[ab]*.*c/ concluded, erroneously, that any
1416     matching string must start with a or b or c. The correct conclusion for
1417     this pattern is that a match can start with any character.
1418    
1419    
1420 nigel 71 Version 4.4 13-Aug-03
1421     ---------------------
1422    
1423     1. In UTF-8 mode, a character class containing characters with values between
1424     127 and 255 was not handled correctly if the compiled pattern was studied.
1425     In fixing this, I have also improved the studying algorithm for such
1426     classes (slightly).
1427    
1428     2. Three internal functions had redundant arguments passed to them. Removal
1429     might give a very teeny performance improvement.
1430    
1431     3. Documentation bug: the value of the capture_top field in a callout is *one
1432     more than* the number of the hightest numbered captured substring.
1433    
1434     4. The Makefile linked pcretest and pcregrep with -lpcre, which could result
1435     in incorrectly linking with a previously installed version. They now link
1436     explicitly with libpcre.la.
1437    
1438     5. configure.in no longer needs to recognize Cygwin specially.
1439    
1440     6. A problem in pcre.in for Windows platforms is fixed.
1441    
1442     7. If a pattern was successfully studied, and the -d (or /D) flag was given to
1443     pcretest, it used to include the size of the study block as part of its
1444     output. Unfortunately, the structure contains a field that has a different
1445     size on different hardware architectures. This meant that the tests that
1446     showed this size failed. As the block is currently always of a fixed size,
1447     this information isn't actually particularly useful in pcretest output, so
1448     I have just removed it.
1449    
1450     8. Three pre-processor statements accidentally did not start in column 1.
1451     Sadly, there are *still* compilers around that complain, even though
1452     standard C has not required this for well over a decade. Sigh.
1453    
1454     9. In pcretest, the code for checking callouts passed small integers in the
1455     callout_data field, which is a void * field. However, some picky compilers
1456     complained about the casts involved for this on 64-bit systems. Now
1457     pcretest passes the address of the small integer instead, which should get
1458     rid of the warnings.
1459    
1460     10. By default, when in UTF-8 mode, PCRE now checks for valid UTF-8 strings at
1461     both compile and run time, and gives an error if an invalid UTF-8 sequence
1462     is found. There is a option for disabling this check in cases where the
1463     string is known to be correct and/or the maximum performance is wanted.
1464    
1465     11. In response to a bug report, I changed one line in Makefile.in from
1466    
1467     -Wl,--out-implib,.libs/lib@WIN_PREFIX@pcreposix.dll.a \
1468     to
1469     -Wl,--out-implib,.libs/@WIN_PREFIX@libpcreposix.dll.a \
1470    
1471     to look similar to other lines, but I have no way of telling whether this
1472     is the right thing to do, as I do not use Windows. No doubt I'll get told
1473     if it's wrong...
1474    
1475    
1476 nigel 69 Version 4.3 21-May-03
1477     ---------------------
1478    
1479     1. Two instances of @WIN_PREFIX@ omitted from the Windows targets in the
1480     Makefile.
1481    
1482     2. Some refactoring to improve the quality of the code:
1483    
1484     (i) The utf8_table... variables are now declared "const".
1485    
1486     (ii) The code for \cx, which used the "case flipping" table to upper case
1487     lower case letters, now just substracts 32. This is ASCII-specific,
1488     but the whole concept of \cx is ASCII-specific, so it seems
1489     reasonable.
1490    
1491     (iii) PCRE was using its character types table to recognize decimal and
1492     hexadecimal digits in the pattern. This is silly, because it handles
1493     only 0-9, a-f, and A-F, but the character types table is locale-
1494     specific, which means strange things might happen. A private
1495     table is now used for this - though it costs 256 bytes, a table is
1496     much faster than multiple explicit tests. Of course, the standard
1497     character types table is still used for matching digits in subject
1498     strings against \d.
1499    
1500     (iv) Strictly, the identifier ESC_t is reserved by POSIX (all identifiers
1501     ending in _t are). So I've renamed it as ESC_tee.
1502    
1503     3. The first argument for regexec() in the POSIX wrapper should have been
1504     defined as "const".
1505    
1506     4. Changed pcretest to use malloc() for its buffers so that they can be
1507     Electric Fenced for debugging.
1508    
1509     5. There were several places in the code where, in UTF-8 mode, PCRE would try
1510     to read one or more bytes before the start of the subject string. Often this
1511     had no effect on PCRE's behaviour, but in some circumstances it could
1512     provoke a segmentation fault.
1513    
1514     6. A lookbehind at the start of a pattern in UTF-8 mode could also cause PCRE
1515     to try to read one or more bytes before the start of the subject string.
1516    
1517     7. A lookbehind in a pattern matched in non-UTF-8 mode on a PCRE compiled with
1518     UTF-8 support could misbehave in various ways if the subject string
1519     contained bytes with the 0x80 bit set and the 0x40 bit unset in a lookbehind
1520     area. (PCRE was not checking for the UTF-8 mode flag, and trying to move
1521     back over UTF-8 characters.)
1522    
1523    
1524 nigel 67 Version 4.2 14-Apr-03
1525     ---------------------
1526    
1527     1. Typo "#if SUPPORT_UTF8" instead of "#ifdef SUPPORT_UTF8" fixed.
1528    
1529     2. Changes to the building process, supplied by Ronald Landheer-Cieslak
1530     [ON_WINDOWS]: new variable, "#" on non-Windows platforms
1531     [NOT_ON_WINDOWS]: new variable, "#" on Windows platforms
1532     [WIN_PREFIX]: new variable, "cyg" for Cygwin
1533     * Makefile.in: use autoconf substitution for OBJEXT, EXEEXT, BUILD_OBJEXT
1534     and BUILD_EXEEXT
1535     Note: automatic setting of the BUILD variables is not yet working
1536     set CPPFLAGS and BUILD_CPPFLAGS (but don't use yet) - should be used at
1537     compile-time but not at link-time
1538     [LINK]: use for linking executables only
1539     make different versions for Windows and non-Windows
1540     [LINKLIB]: new variable, copy of UNIX-style LINK, used for linking
1541     libraries
1542     [LINK_FOR_BUILD]: new variable
1543     [OBJEXT]: use throughout
1544     [EXEEXT]: use throughout
1545     <winshared>: new target
1546     <wininstall>: new target
1547     <dftables.o>: use native compiler
1548     <dftables>: use native linker
1549     <install>: handle Windows platform correctly
1550     <clean>: ditto
1551     <check>: ditto
1552     copy DLL to top builddir before testing
1553    
1554     As part of these changes, -no-undefined was removed again. This was reported
1555     to give trouble on HP-UX 11.0, so getting rid of it seems like a good idea
1556     in any case.
1557    
1558     3. Some tidies to get rid of compiler warnings:
1559    
1560     . In the match_data structure, match_limit was an unsigned long int, whereas
1561     match_call_count was an int. I've made them both unsigned long ints.
1562    
1563     . In pcretest the fact that a const uschar * doesn't automatically cast to
1564     a void * provoked a warning.
1565    
1566     . Turning on some more compiler warnings threw up some "shadow" variables
1567     and a few more missing casts.
1568    
1569     4. If PCRE was complied with UTF-8 support, but called without the PCRE_UTF8
1570     option, a class that contained a single character with a value between 128
1571     and 255 (e.g. /[\xFF]/) caused PCRE to crash.
1572    
1573     5. If PCRE was compiled with UTF-8 support, but called without the PCRE_UTF8
1574     option, a class that contained several characters, but with at least one
1575     whose value was between 128 and 255 caused PCRE to crash.
1576    
1577    
1578 nigel 65 Version 4.1 12-Mar-03
1579     ---------------------
1580 nigel 63
1581 nigel 65 1. Compiling with gcc -pedantic found a couple of places where casts were
1582     needed, and a string in dftables.c that was longer than standard compilers are
1583     required to support.
1584    
1585     2. Compiling with Sun's compiler found a few more places where the code could
1586     be tidied up in order to avoid warnings.
1587    
1588     3. The variables for cross-compiling were called HOST_CC and HOST_CFLAGS; the
1589     first of these names is deprecated in the latest Autoconf in favour of the name
1590     CC_FOR_BUILD, because "host" is typically used to mean the system on which the
1591     compiled code will be run. I can't find a reference for HOST_CFLAGS, but by
1592     analogy I have changed it to CFLAGS_FOR_BUILD.
1593    
1594     4. Added -no-undefined to the linking command in the Makefile, because this is
1595     apparently helpful for Windows. To make it work, also added "-L. -lpcre" to the
1596     linking step for the pcreposix library.
1597    
1598     5. PCRE was failing to diagnose the case of two named groups with the same
1599     name.
1600    
1601     6. A problem with one of PCRE's optimizations was discovered. PCRE remembers a
1602     literal character that is needed in the subject for a match, and scans along to
1603     ensure that it is present before embarking on the full matching process. This
1604     saves time in cases of nested unlimited repeats that are never going to match.
1605     Problem: the scan can take a lot of time if the subject is very long (e.g.
1606     megabytes), thus penalizing straightforward matches. It is now done only if the
1607     amount of subject to be scanned is less than 1000 bytes.
1608    
1609     7. A lesser problem with the same optimization is that it was recording the
1610     first character of an anchored pattern as "needed", thus provoking a search
1611     right along the subject, even when the first match of the pattern was going to
1612     fail. The "needed" character is now not set for anchored patterns, unless it
1613     follows something in the pattern that is of non-fixed length. Thus, it still
1614     fulfils its original purpose of finding quick non-matches in cases of nested
1615     unlimited repeats, but isn't used for simple anchored patterns such as /^abc/.
1616    
1617    
1618     Version 4.0 17-Feb-03
1619     ---------------------
1620    
1621 nigel 63 1. If a comment in an extended regex that started immediately after a meta-item
1622     extended to the end of string, PCRE compiled incorrect data. This could lead to
1623     all kinds of weird effects. Example: /#/ was bad; /()#/ was bad; /a#/ was not.
1624    
1625     2. Moved to autoconf 2.53 and libtool 1.4.2.
1626    
1627     3. Perl 5.8 no longer needs "use utf8" for doing UTF-8 things. Consequently,
1628     the special perltest8 script is no longer needed - all the tests can be run
1629     from a single perltest script.
1630    
1631     4. From 5.004, Perl has not included the VT character (0x0b) in the set defined
1632     by \s. It has now been removed in PCRE. This means it isn't recognized as
1633     whitespace in /x regexes too, which is the same as Perl. Note that the POSIX
1634     class [:space:] *does* include VT, thereby creating a mess.
1635    
1636     5. Added the class [:blank:] (a GNU extension from Perl 5.8) to match only
1637     space and tab.
1638    
1639     6. Perl 5.005 was a long time ago. It's time to amalgamate the tests that use
1640     its new features into the main test script, reducing the number of scripts.
1641    
1642     7. Perl 5.8 has changed the meaning of patterns like /a(?i)b/. Earlier versions
1643     were backward compatible, and made the (?i) apply to the whole pattern, as if
1644     /i were given. Now it behaves more logically, and applies the option setting
1645     only to what follows. PCRE has been changed to follow suit. However, if it
1646     finds options settings right at the start of the pattern, it extracts them into
1647     the global options, as before. Thus, they show up in the info data.
1648    
1649     8. Added support for the \Q...\E escape sequence. Characters in between are
1650     treated as literals. This is slightly different from Perl in that $ and @ are
1651     also handled as literals inside the quotes. In Perl, they will cause variable
1652     interpolation. Note the following examples:
1653    
1654     Pattern PCRE matches Perl matches
1655    
1656     \Qabc$xyz\E abc$xyz abc followed by the contents of $xyz
1657     \Qabc\$xyz\E abc\$xyz abc\$xyz
1658     \Qabc\E\$\Qxyz\E abc$xyz abc$xyz
1659    
1660     For compatibility with Perl, \Q...\E sequences are recognized inside character
1661     classes as well as outside them.
1662    
1663     9. Re-organized 3 code statements in pcretest to avoid "overflow in
1664     floating-point constant arithmetic" warnings from a Microsoft compiler. Added a
1665     (size_t) cast to one statement in pcretest and one in pcreposix to avoid
1666     signed/unsigned warnings.
1667    
1668     10. SunOS4 doesn't have strtoul(). This was used only for unpicking the -o
1669     option for pcretest, so I've replaced it by a simple function that does just
1670     that job.
1671    
1672     11. pcregrep was ending with code 0 instead of 2 for the commands "pcregrep" or
1673     "pcregrep -".
1674    
1675     12. Added "possessive quantifiers" ?+, *+, ++, and {,}+ which come from Sun's
1676     Java package. This provides some syntactic sugar for simple cases of what my
1677     documentation calls "once-only subpatterns". A pattern such as x*+ is the same
1678     as (?>x*). In other words, if what is inside (?>...) is just a single repeated
1679     item, you can use this simplified notation. Note that only makes sense with
1680     greedy quantifiers. Consequently, the use of the possessive quantifier forces
1681     greediness, whatever the setting of the PCRE_UNGREEDY option.
1682    
1683     13. A change of greediness default within a pattern was not taking effect at
1684     the current level for patterns like /(b+(?U)a+)/. It did apply to parenthesized
1685     subpatterns that followed. Patterns like /b+(?U)a+/ worked because the option
1686     was abstracted outside.
1687    
1688     14. PCRE now supports the \G assertion. It is true when the current matching
1689     position is at the start point of the match. This differs from \A when the
1690     starting offset is non-zero. Used with the /g option of pcretest (or similar
1691     code), it works in the same way as it does for Perl's /g option. If all
1692     alternatives of a regex begin with \G, the expression is anchored to the start
1693     match position, and the "anchored" flag is set in the compiled expression.
1694    
1695     15. Some bugs concerning the handling of certain option changes within patterns
1696     have been fixed. These applied to options other than (?ims). For example,
1697     "a(?x: b c )d" did not match "XabcdY" but did match "Xa b c dY". It should have
1698     been the other way round. Some of this was related to change 7 above.
1699    
1700     16. PCRE now gives errors for /[.x.]/ and /[=x=]/ as unsupported POSIX
1701     features, as Perl does. Previously, PCRE gave the warnings only for /[[.x.]]/
1702     and /[[=x=]]/. PCRE now also gives an error for /[:name:]/ because it supports
1703     POSIX classes only within a class (e.g. /[[:alpha:]]/).
1704    
1705     17. Added support for Perl's \C escape. This matches one byte, even in UTF8
1706     mode. Unlike ".", it always matches newline, whatever the setting of
1707     PCRE_DOTALL. However, PCRE does not permit \C to appear in lookbehind
1708     assertions. Perl allows it, but it doesn't (in general) work because it can't
1709     calculate the length of the lookbehind. At least, that's the case for Perl
1710     5.8.0 - I've been told they are going to document that it doesn't work in
1711     future.
1712    
1713     18. Added an error diagnosis for escapes that PCRE does not support: these are
1714     \L, \l, \N, \P, \p, \U, \u, and \X.
1715    
1716     19. Although correctly diagnosing a missing ']' in a character class, PCRE was
1717     reading past the end of the pattern in cases such as /[abcd/.
1718    
1719     20. PCRE was getting more memory than necessary for patterns with classes that
1720     contained both POSIX named classes and other characters, e.g. /[[:space:]abc/.
1721    
1722     21. Added some code, conditional on #ifdef VPCOMPAT, to make life easier for
1723     compiling PCRE for use with Virtual Pascal.
1724    
1725     22. Small fix to the Makefile to make it work properly if the build is done
1726     outside the source tree.
1727    
1728     23. Added a new extension: a condition to go with recursion. If a conditional
1729     subpattern starts with (?(R) the "true" branch is used if recursion has
1730     happened, whereas the "false" branch is used only at the top level.
1731    
1732     24. When there was a very long string of literal characters (over 255 bytes
1733     without UTF support, over 250 bytes with UTF support), the computation of how
1734     much memory was required could be incorrect, leading to segfaults or other
1735     strange effects.
1736    
1737     25. PCRE was incorrectly assuming anchoring (either to start of subject or to
1738     start of line for a non-DOTALL pattern) when a pattern started with (.*) and
1739     there was a subsequent back reference to those brackets. This meant that, for
1740     example, /(.*)\d+\1/ failed to match "abc123bc". Unfortunately, it isn't
1741     possible to check for precisely this case. All we can do is abandon the
1742     optimization if .* occurs inside capturing brackets when there are any back
1743     references whatsoever. (See below for a better fix that came later.)
1744    
1745     26. The handling of the optimization for finding the first character of a
1746     non-anchored pattern, and for finding a character that is required later in the
1747     match were failing in some cases. This didn't break the matching; it just
1748     failed to optimize when it could. The way this is done has been re-implemented.
1749    
1750     27. Fixed typo in error message for invalid (?R item (it said "(?p").
1751    
1752     28. Added a new feature that provides some of the functionality that Perl
1753     provides with (?{...}). The facility is termed a "callout". The way it is done
1754     in PCRE is for the caller to provide an optional function, by setting
1755     pcre_callout to its entry point. Like pcre_malloc and pcre_free, this is a
1756     global variable. By default it is unset, which disables all calling out. To get
1757     the function called, the regex must include (?C) at appropriate points. This
1758     is, in fact, equivalent to (?C0), and any number <= 255 may be given with (?C).
1759     This provides a means of identifying different callout points. When PCRE
1760     reaches such a point in the regex, if pcre_callout has been set, the external
1761     function is called. It is provided with data in a structure called
1762     pcre_callout_block, which is defined in pcre.h. If the function returns 0,
1763     matching continues; if it returns a non-zero value, the match at the current
1764     point fails. However, backtracking will occur if possible. [This was changed
1765     later and other features added - see item 49 below.]
1766    
1767     29. pcretest is upgraded to test the callout functionality. It provides a
1768     callout function that displays information. By default, it shows the start of
1769     the match and the current position in the text. There are some new data escapes
1770     to vary what happens:
1771    
1772     \C+ in addition, show current contents of captured substrings
1773     \C- do not supply a callout function
1774     \C!n return 1 when callout number n is reached
1775     \C!n!m return 1 when callout number n is reached for the mth time
1776    
1777     30. If pcregrep was called with the -l option and just a single file name, it
1778     output "<stdin>" if a match was found, instead of the file name.
1779    
1780     31. Improve the efficiency of the POSIX API to PCRE. If the number of capturing
1781     slots is less than POSIX_MALLOC_THRESHOLD, use a block on the stack to pass to
1782     pcre_exec(). This saves a malloc/free per call. The default value of
1783     POSIX_MALLOC_THRESHOLD is 10; it can be changed by --with-posix-malloc-threshold
1784     when configuring.
1785    
1786     32. The default maximum size of a compiled pattern is 64K. There have been a
1787     few cases of people hitting this limit. The code now uses macros to handle the
1788     storing of links as offsets within the compiled pattern. It defaults to 2-byte
1789     links, but this can be changed to 3 or 4 bytes by --with-link-size when
1790     configuring. Tests 2 and 5 work only with 2-byte links because they output
1791     debugging information about compiled patterns.
1792    
1793     33. Internal code re-arrangements:
1794    
1795     (a) Moved the debugging function for printing out a compiled regex into
1796     its own source file (printint.c) and used #include to pull it into
1797     pcretest.c and, when DEBUG is defined, into pcre.c, instead of having two
1798     separate copies.
1799    
1800     (b) Defined the list of op-code names for debugging as a macro in
1801     internal.h so that it is next to the definition of the opcodes.
1802    
1803     (c) Defined a table of op-code lengths for simpler skipping along compiled
1804     code. This is again a macro in internal.h so that it is next to the
1805     definition of the opcodes.
1806    
1807     34. Added support for recursive calls to individual subpatterns, along the
1808     lines of Robin Houston's patch (but implemented somewhat differently).
1809    
1810     35. Further mods to the Makefile to help Win32. Also, added code to pcregrep to
1811     allow it to read and process whole directories in Win32. This code was
1812     contributed by Lionel Fourquaux; it has not been tested by me.
1813    
1814     36. Added support for named subpatterns. The Python syntax (?P<name>...) is
1815     used to name a group. Names consist of alphanumerics and underscores, and must
1816     be unique. Back references use the syntax (?P=name) and recursive calls use
1817     (?P>name) which is a PCRE extension to the Python extension. Groups still have
1818     numbers. The function pcre_fullinfo() can be used after compilation to extract
1819     a name/number map. There are three relevant calls:
1820    
1821     PCRE_INFO_NAMEENTRYSIZE yields the size of each entry in the map
1822     PCRE_INFO_NAMECOUNT yields the number of entries
1823     PCRE_INFO_NAMETABLE yields a pointer to the map.
1824    
1825     The map is a vector of fixed-size entries. The size of each entry depends on
1826     the length of the longest name used. The first two bytes of each entry are the
1827     group number, most significant byte first. There follows the corresponding
1828     name, zero terminated. The names are in alphabetical order.
1829    
1830     37. Make the maximum literal string in the compiled code 250 for the non-UTF-8
1831     case instead of 255. Making it the same both with and without UTF-8 support
1832     means that the same test output works with both.
1833    
1834     38. There was a case of malloc(0) in the POSIX testing code in pcretest. Avoid
1835     calling malloc() with a zero argument.
1836    
1837     39. Change 25 above had to resort to a heavy-handed test for the .* anchoring
1838     optimization. I've improved things by keeping a bitmap of backreferences with
1839     numbers 1-31 so that if .* occurs inside capturing brackets that are not in
1840     fact referenced, the optimization can be applied. It is unlikely that a
1841     relevant occurrence of .* (i.e. one which might indicate anchoring or forcing
1842     the match to follow \n) will appear inside brackets with a number greater than
1843     31, but if it does, any back reference > 31 suppresses the optimization.
1844    
1845     40. Added a new compile-time option PCRE_NO_AUTO_CAPTURE. This has the effect
1846     of disabling numbered capturing parentheses. Any opening parenthesis that is
1847     not followed by ? behaves as if it were followed by ?: but named parentheses
1848     can still be used for capturing (and they will acquire numbers in the usual
1849     way).
1850    
1851     41. Redesigned the return codes from the match() function into yes/no/error so
1852     that errors can be passed back from deep inside the nested calls. A malloc
1853     failure while inside a recursive subpattern call now causes the
1854     PCRE_ERROR_NOMEMORY return instead of quietly going wrong.
1855    
1856     42. It is now possible to set a limit on the number of times the match()
1857     function is called in a call to pcre_exec(). This facility makes it possible to
1858     limit the amount of recursion and backtracking, though not in a directly
1859     obvious way, because the match() function is used in a number of different
1860     circumstances. The count starts from zero for each position in the subject
1861     string (for non-anchored patterns). The default limit is, for compatibility, a
1862     large number, namely 10 000 000. You can change this in two ways:
1863    
1864     (a) When configuring PCRE before making, you can use --with-match-limit=n
1865     to set a default value for the compiled library.
1866    
1867     (b) For each call to pcre_exec(), you can pass a pcre_extra block in which
1868     a different value is set. See 45 below.
1869    
1870     If the limit is exceeded, pcre_exec() returns PCRE_ERROR_MATCHLIMIT.
1871    
1872     43. Added a new function pcre_config(int, void *) to enable run-time extraction
1873     of things that can be changed at compile time. The first argument specifies
1874     what is wanted and the second points to where the information is to be placed.
1875     The current list of available information is:
1876    
1877     PCRE_CONFIG_UTF8
1878    
1879     The output is an integer that is set to one if UTF-8 support is available;
1880     otherwise it is set to zero.
1881    
1882     PCRE_CONFIG_NEWLINE
1883    
1884     The output is an integer that it set to the value of the code that is used for
1885     newline. It is either LF (10) or CR (13).
1886    
1887     PCRE_CONFIG_LINK_SIZE
1888    
1889     The output is an integer that contains the number of bytes used for internal
1890     linkage in compiled expressions. The value is 2, 3, or 4. See item 32 above.
1891    
1892     PCRE_CONFIG_POSIX_MALLOC_THRESHOLD
1893    
1894     The output is an integer that contains the threshold above which the POSIX
1895     interface uses malloc() for output vectors. See item 31 above.
1896    
1897     PCRE_CONFIG_MATCH_LIMIT
1898    
1899     The output is an unsigned integer that contains the default limit of the number
1900     of match() calls in a pcre_exec() execution. See 42 above.
1901    
1902     44. pcretest has been upgraded by the addition of the -C option. This causes it
1903     to extract all the available output from the new pcre_config() function, and to
1904     output it. The program then exits immediately.
1905    
1906     45. A need has arisen to pass over additional data with calls to pcre_exec() in
1907     order to support additional features. One way would have been to define
1908     pcre_exec2() (for example) with extra arguments, but this would not have been
1909     extensible, and would also have required all calls to the original function to
1910     be mapped to the new one. Instead, I have chosen to extend the mechanism that
1911     is used for passing in "extra" data from pcre_study().
1912    
1913     The pcre_extra structure is now exposed and defined in pcre.h. It currently
1914     contains the following fields:
1915    
1916     flags a bitmap indicating which of the following fields are set
1917     study_data opaque data from pcre_study()
1918     match_limit a way of specifying a limit on match() calls for a specific
1919     call to pcre_exec()
1920     callout_data data for callouts (see 49 below)
1921    
1922     The flag bits are also defined in pcre.h, and are
1923    
1924     PCRE_EXTRA_STUDY_DATA
1925     PCRE_EXTRA_MATCH_LIMIT
1926     PCRE_EXTRA_CALLOUT_DATA
1927    
1928     The pcre_study() function now returns one of these new pcre_extra blocks, with
1929     the actual study data pointed to by the study_data field, and the
1930     PCRE_EXTRA_STUDY_DATA flag set. This can be passed directly to pcre_exec() as
1931     before. That is, this change is entirely upwards-compatible and requires no
1932     change to existing code.
1933    
1934     If you want to pass in additional data to pcre_exec(), you can either place it
1935     in a pcre_extra block provided by pcre_study(), or create your own pcre_extra
1936     block.
1937    
1938     46. pcretest has been extended to test the PCRE_EXTRA_MATCH_LIMIT feature. If a
1939     data string contains the escape sequence \M, pcretest calls pcre_exec() several
1940     times with different match limits, until it finds the minimum value needed for
1941     pcre_exec() to complete. The value is then output. This can be instructive; for
1942     most simple matches the number is quite small, but for pathological cases it
1943     gets very large very quickly.
1944    
1945     47. There's a new option for pcre_fullinfo() called PCRE_INFO_STUDYSIZE. It
1946     returns the size of the data block pointed to by the study_data field in a
1947     pcre_extra block, that is, the value that was passed as the argument to
1948     pcre_malloc() when PCRE was getting memory in which to place the information
1949     created by pcre_study(). The fourth argument should point to a size_t variable.
1950     pcretest has been extended so that this information is shown after a successful
1951     pcre_study() call when information about the compiled regex is being displayed.
1952    
1953     48. Cosmetic change to Makefile: there's no need to have / after $(DESTDIR)
1954     because what follows is always an absolute path. (Later: it turns out that this
1955     is more than cosmetic for MinGW, because it doesn't like empty path
1956     components.)
1957    
1958     49. Some changes have been made to the callout feature (see 28 above):
1959    
1960     (i) A callout function now has three choices for what it returns:
1961    
1962     0 => success, carry on matching
1963     > 0 => failure at this point, but backtrack if possible
1964     < 0 => serious error, return this value from pcre_exec()
1965    
1966     Negative values should normally be chosen from the set of PCRE_ERROR_xxx
1967     values. In particular, returning PCRE_ERROR_NOMATCH forces a standard
1968     "match failed" error. The error number PCRE_ERROR_CALLOUT is reserved for
1969     use by callout functions. It will never be used by PCRE itself.
1970    
1971     (ii) The pcre_extra structure (see 45 above) has a void * field called
1972     callout_data, with corresponding flag bit PCRE_EXTRA_CALLOUT_DATA. The
1973     pcre_callout_block structure has a field of the same name. The contents of
1974     the field passed in the pcre_extra structure are passed to the callout
1975     function in the corresponding field in the callout block. This makes it
1976     easier to use the same callout-containing regex from multiple threads. For
1977     testing, the pcretest program has a new data escape
1978    
1979     \C*n pass the number n (may be negative) as callout_data
1980    
1981     If the callout function in pcretest receives a non-zero value as
1982     callout_data, it returns that value.
1983    
1984     50. Makefile wasn't handling CFLAGS properly when compiling dftables. Also,
1985     there were some redundant $(CFLAGS) in commands that are now specified as
1986     $(LINK), which already includes $(CFLAGS).
1987    
1988     51. Extensions to UTF-8 support are listed below. These all apply when (a) PCRE
1989     has been compiled with UTF-8 support *and* pcre_compile() has been compiled
1990     with the PCRE_UTF8 flag. Patterns that are compiled without that flag assume
1991     one-byte characters throughout. Note that case-insensitive matching applies
1992     only to characters whose values are less than 256. PCRE doesn't support the
1993     notion of cases for higher-valued characters.
1994    
1995     (i) A character class whose characters are all within 0-255 is handled as
1996     a bit map, and the map is inverted for negative classes. Previously, a
1997     character > 255 always failed to match such a class; however it should
1998     match if the class was a negative one (e.g. [^ab]). This has been fixed.
1999    
2000     (ii) A negated character class with a single character < 255 is coded as
2001     "not this character" (OP_NOT). This wasn't working properly when the test
2002     character was multibyte, either singly or repeated.
2003    
2004     (iii) Repeats of multibyte characters are now handled correctly in UTF-8
2005     mode, for example: \x{100}{2,3}.
2006    
2007     (iv) The character escapes \b, \B, \d, \D, \s, \S, \w, and \W (either
2008     singly or repeated) now correctly test multibyte characters. However,
2009     PCRE doesn't recognize any characters with values greater than 255 as
2010     digits, spaces, or word characters. Such characters always match \D, \S,
2011     and \W, and never match \d, \s, or \w.
2012    
2013     (v) Classes may now contain characters and character ranges with values
2014     greater than 255. For example: [ab\x{100}-\x{400}].
2015    
2016     (vi) pcregrep now has a --utf-8 option (synonym -u) which makes it call
2017     PCRE in UTF-8 mode.
2018    
2019     52. The info request value PCRE_INFO_FIRSTCHAR has been renamed
2020     PCRE_INFO_FIRSTBYTE because it is a byte value. However, the old name is
2021     retained for backwards compatibility. (Note that LASTLITERAL is also a byte
2022     value.)
2023    
2024     53. The single man page has become too large. I have therefore split it up into
2025     a number of separate man pages. These also give rise to individual HTML pages;
2026     these are now put in a separate directory, and there is an index.html page that
2027     lists them all. Some hyperlinking between the pages has been installed.
2028    
2029     54. Added convenience functions for handling named capturing parentheses.
2030    
2031     55. Unknown escapes inside character classes (e.g. [\M]) and escapes that
2032     aren't interpreted therein (e.g. [\C]) are literals in Perl. This is now also
2033     true in PCRE, except when the PCRE_EXTENDED option is set, in which case they
2034     are faulted.
2035    
2036     56. Introduced HOST_CC and HOST_CFLAGS which can be set in the environment when
2037     calling configure. These values are used when compiling the dftables.c program
2038     which is run to generate the source of the default character tables. They
2039     default to the values of CC and CFLAGS. If you are cross-compiling PCRE,
2040     you will need to set these values.
2041    
2042     57. Updated the building process for Windows DLL, as provided by Fred Cox.
2043    
2044    
2045     Version 3.9 02-Jan-02
2046 nigel 61 ---------------------
2047    
2048     1. A bit of extraneous text had somehow crept into the pcregrep documentation.
2049    
2050     2. If --disable-static was given, the building process failed when trying to
2051     build pcretest and pcregrep. (For some reason it was using libtool to compile
2052     them, which is not right, as they aren't part of the library.)
2053    
2054    
2055 nigel 59 Version 3.8 18-Dec-01
2056     ---------------------
2057    
2058     1. The experimental UTF-8 code was completely screwed up. It was packing the
2059     bytes in the wrong order. How dumb can you get?
2060    
2061    
2062 nigel 57 Version 3.7 29-Oct-01
2063     ---------------------
2064    
2065     1. In updating pcretest to check change 1 of version 3.6, I screwed up.
2066     This caused pcretest, when used on the test data, to segfault. Unfortunately,
2067     this didn't happen under Solaris 8, where I normally test things.
2068    
2069 nigel 59 2. The Makefile had to be changed to make it work on BSD systems, where 'make'
2070     doesn't seem to recognize that ./xxx and xxx are the same file. (This entry
2071     isn't in ChangeLog distributed with 3.7 because I forgot when I hastily made
2072     this fix an hour or so after the initial 3.7 release.)
2073 nigel 57
2074 nigel 59
2075 nigel 55 Version 3.6 23-Oct-01
2076     ---------------------
2077    
2078     1. Crashed with /(sens|respons)e and \1ibility/ and "sense and sensibility" if
2079     offsets passed as NULL with zero offset count.
2080    
2081     2. The config.guess and config.sub files had not been updated when I moved to
2082     the latest autoconf.
2083    
2084    
2085 nigel 53 Version 3.5 15-Aug-01
2086     ---------------------
2087 nigel 5
2088 nigel 53 1. Added some missing #if !defined NOPOSIX conditionals in pcretest.c that
2089     had been forgotten.
2090    
2091     2. By using declared but undefined structures, we can avoid using "void"
2092     definitions in pcre.h while keeping the internal definitions of the structures
2093     private.
2094    
2095     3. The distribution is now built using autoconf 2.50 and libtool 1.4. From a
2096     user point of view, this means that both static and shared libraries are built
2097     by default, but this can be individually controlled. More of the work of
2098     handling this static/shared cases is now inside libtool instead of PCRE's make
2099     file.
2100    
2101     4. The pcretest utility is now installed along with pcregrep because it is
2102     useful for users (to test regexs) and by doing this, it automatically gets
2103     relinked by libtool. The documentation has been turned into a man page, so
2104     there are now .1, .txt, and .html versions in /doc.
2105    
2106     5. Upgrades to pcregrep:
2107     (i) Added long-form option names like gnu grep.
2108     (ii) Added --help to list all options with an explanatory phrase.
2109     (iii) Added -r, --recursive to recurse into sub-directories.
2110     (iv) Added -f, --file to read patterns from a file.
2111    
2112     6. pcre_exec() was referring to its "code" argument before testing that
2113     argument for NULL (and giving an error if it was NULL).
2114    
2115     7. Upgraded Makefile.in to allow for compiling in a different directory from
2116     the source directory.
2117    
2118     8. Tiny buglet in pcretest: when pcre_fullinfo() was called to retrieve the
2119     options bits, the pointer it was passed was to an int instead of to an unsigned
2120     long int. This mattered only on 64-bit systems.
2121    
2122     9. Fixed typo (3.4/1) in pcre.h again. Sigh. I had changed pcre.h (which is
2123     generated) instead of pcre.in, which it its source. Also made the same change
2124     in several of the .c files.
2125    
2126     10. A new release of gcc defines printf() as a macro, which broke pcretest
2127     because it had an ifdef in the middle of a string argument for printf(). Fixed
2128     by using separate calls to printf().
2129    
2130     11. Added --enable-newline-is-cr and --enable-newline-is-lf to the configure
2131     script, to force use of CR or LF instead of \n in the source. On non-Unix
2132     systems, the value can be set in config.h.
2133    
2134     12. The limit of 200 on non-capturing parentheses is a _nesting_ limit, not an
2135     absolute limit. Changed the text of the error message to make this clear, and
2136     likewise updated the man page.
2137    
2138     13. The limit of 99 on the number of capturing subpatterns has been removed.
2139     The new limit is 65535, which I hope will not be a "real" limit.
2140    
2141    
2142 nigel 51 Version 3.4 22-Aug-00
2143     ---------------------
2144    
2145     1. Fixed typo in pcre.h: unsigned const char * changed to const unsigned char *.
2146    
2147     2. Diagnose condition (?(0) as an error instead of crashing on matching.
2148    
2149    
2150 nigel 49 Version 3.3 01-Aug-00
2151     ---------------------
2152    
2153     1. If an octal character was given, but the value was greater than \377, it
2154     was not getting masked to the least significant bits, as documented. This could
2155     lead to crashes in some systems.
2156    
2157     2. Perl 5.6 (if not earlier versions) accepts classes like [a-\d] and treats
2158     the hyphen as a literal. PCRE used to give an error; it now behaves like Perl.
2159    
2160     3. Added the functions pcre_free_substring() and pcre_free_substring_list().
2161     These just pass their arguments on to (pcre_free)(), but they are provided
2162     because some uses of PCRE bind it to non-C systems that can call its functions,
2163     but cannot call free() or pcre_free() directly.
2164    
2165     4. Add "make test" as a synonym for "make check". Corrected some comments in
2166     the Makefile.
2167    
2168     5. Add $(DESTDIR)/ in front of all the paths in the "install" target in the
2169     Makefile.
2170    
2171     6. Changed the name of pgrep to pcregrep, because Solaris has introduced a
2172     command called pgrep for grepping around the active processes.
2173    
2174     7. Added the beginnings of support for UTF-8 character strings.
2175    
2176     8. Arranged for the Makefile to pass over the settings of CC, CFLAGS, and
2177     RANLIB to ./ltconfig so that they are used by libtool. I think these are all
2178     the relevant ones. (AR is not passed because ./ltconfig does its own figuring
2179     out for the ar command.)
2180    
2181    
2182 nigel 47 Version 3.2 12-May-00
2183     ---------------------
2184    
2185     This is purely a bug fixing release.
2186    
2187     1. If the pattern /((Z)+|A)*/ was matched agained ZABCDEFG it matched Z instead
2188     of ZA. This was just one example of several cases that could provoke this bug,
2189     which was introduced by change 9 of version 2.00. The code for breaking
2190     infinite loops after an iteration that matches an empty string was't working
2191     correctly.
2192    
2193     2. The pcretest program was not imitating Perl correctly for the pattern /a*/g
2194     when matched against abbab (for example). After matching an empty string, it
2195     wasn't forcing anchoring when setting PCRE_NOTEMPTY for the next attempt; this
2196     caused it to match further down the string than it should.
2197    
2198     3. The code contained an inclusion of sys/types.h. It isn't clear why this
2199     was there because it doesn't seem to be needed, and it causes trouble on some
2200     systems, as it is not a Standard C header. It has been removed.
2201    
2202     4. Made 4 silly changes to the source to avoid stupid compiler warnings that
2203     were reported on the Macintosh. The changes were from
2204    
2205     while ((c = *(++ptr)) != 0 && c != '\n');
2206     to
2207     while ((c = *(++ptr)) != 0 && c != '\n') ;
2208    
2209     Totally extraordinary, but if that's what it takes...
2210    
2211     5. PCRE is being used in one environment where neither memmove() nor bcopy() is
2212     available. Added HAVE_BCOPY and an autoconf test for it; if neither
2213     HAVE_MEMMOVE nor HAVE_BCOPY is set, use a built-in emulation function which
2214     assumes the way PCRE uses memmove() (always moving upwards).
2215    
2216     6. PCRE is being used in one environment where strchr() is not available. There
2217     was only one use in pcre.c, and writing it out to avoid strchr() probably gives
2218     faster code anyway.
2219    
2220    
2221 nigel 45 Version 3.1 09-Feb-00
2222     ---------------------
2223    
2224     The only change in this release is the fixing of some bugs in Makefile.in for
2225     the "install" target:
2226    
2227     (1) It was failing to install pcreposix.h.
2228    
2229     (2) It was overwriting the pcre.3 man page with the pcreposix.3 man page.
2230    
2231    
2232 nigel 43 Version 3.0 01-Feb-00
2233     ---------------------
2234 nigel 41
2235     1. Add support for the /+ modifier to perltest (to output $` like it does in
2236     pcretest).
2237    
2238     2. Add support for the /g modifier to perltest.
2239    
2240     3. Fix pcretest so that it behaves even more like Perl for /g when the pattern
2241     matches null strings.
2242    
2243     4. Fix perltest so that it doesn't do unwanted things when fed an empty
2244     pattern. Perl treats empty patterns specially - it reuses the most recent
2245     pattern, which is not what we want. Replace // by /(?#)/ in order to avoid this
2246     effect.
2247    
2248     5. The POSIX interface was broken in that it was just handing over the POSIX
2249     captured string vector to pcre_exec(), but (since release 2.00) PCRE has
2250     required a bigger vector, with some working space on the end. This means that
2251     the POSIX wrapper now has to get and free some memory, and copy the results.
2252    
2253 nigel 43 6. Added some simple autoconf support, placing the test data and the
2254     documentation in separate directories, re-organizing some of the
2255     information files, and making it build pcre-config (a GNU standard). Also added
2256     libtool support for building PCRE as a shared library, which is now the
2257     default.
2258 nigel 41
2259 nigel 43 7. Got rid of the leading zero in the definition of PCRE_MINOR because 08 and
2260     09 are not valid octal constants. Single digits will be used for minor values
2261     less than 10.
2262    
2263     8. Defined REG_EXTENDED and REG_NOSUB as zero in the POSIX header, so that
2264     existing programs that set these in the POSIX interface can use PCRE without
2265     modification.
2266    
2267     9. Added a new function, pcre_fullinfo() with an extensible interface. It can
2268     return all that pcre_info() returns, plus additional data. The pcre_info()
2269     function is retained for compatibility, but is considered to be obsolete.
2270    
2271     10. Added experimental recursion feature (?R) to handle one common case that
2272     Perl 5.6 will be able to do with (?p{...}).
2273    
2274     11. Added support for POSIX character classes like [:alpha:], which Perl is
2275     adopting.
2276    
2277    
2278 nigel 39 Version 2.08 31-Aug-99
2279     ----------------------
2280    
2281     1. When startoffset was not zero and the pattern began with ".*", PCRE was not
2282     trying to match at the startoffset position, but instead was moving forward to
2283     the next newline as if a previous match had failed.
2284    
2285     2. pcretest was not making use of PCRE_NOTEMPTY when repeating for /g and /G,
2286     and could get into a loop if a null string was matched other than at the start
2287     of the subject.
2288    
2289     3. Added definitions of PCRE_MAJOR and PCRE_MINOR to pcre.h so the version can
2290     be distinguished at compile time, and for completeness also added PCRE_DATE.
2291    
2292     5. Added Paul Sokolovsky's minor changes to make it easy to compile a Win32 DLL
2293     in GnuWin32 environments.
2294    
2295    
2296 nigel 37 Version 2.07 29-Jul-99
2297     ----------------------
2298    
2299     1. The documentation is now supplied in plain text form and HTML as well as in
2300     the form of man page sources.
2301    
2302     2. C++ compilers don't like assigning (void *) values to other pointer types.
2303     In particular this affects malloc(). Although there is no problem in Standard
2304     C, I've put in casts to keep C++ compilers happy.
2305    
2306     3. Typo on pcretest.c; a cast of (unsigned char *) in the POSIX regexec() call
2307     should be (const char *).
2308    
2309     4. If NOPOSIX is defined, pcretest.c compiles without POSIX support. This may
2310     be useful for non-Unix systems who don't want to bother with the POSIX stuff.
2311     However, I haven't made this a standard facility. The documentation doesn't
2312     mention it, and the Makefile doesn't support it.
2313    
2314     5. The Makefile now contains an "install" target, with editable destinations at
2315     the top of the file. The pcretest program is not installed.
2316    
2317     6. pgrep -V now gives the PCRE version number and date.
2318    
2319     7. Fixed bug: a zero repetition after a literal string (e.g. /abcde{0}/) was
2320     causing the entire string to be ignored, instead of just the last character.
2321    
2322     8. If a pattern like /"([^\\"]+|\\.)*"/ is applied in the normal way to a
2323     non-matching string, it can take a very, very long time, even for strings of
2324     quite modest length, because of the nested recursion. PCRE now does better in
2325     some of these cases. It does this by remembering the last required literal
2326     character in the pattern, and pre-searching the subject to ensure it is present
2327     before running the real match. In other words, it applies a heuristic to detect
2328     some types of certain failure quickly, and in the above example, if presented
2329     with a string that has no trailing " it gives "no match" very quickly.
2330    
2331     9. A new runtime option PCRE_NOTEMPTY causes null string matches to be ignored;
2332     other alternatives are tried instead.
2333    
2334    
2335 nigel 35 Version 2.06 09-Jun-99
2336     ----------------------
2337    
2338     1. Change pcretest's output for amount of store used to show just the code
2339     space, because the remainder (the data block) varies in size between 32-bit and
2340     64-bit systems.
2341    
2342     2. Added an extra argument to pcre_exec() to supply an offset in the subject to
2343     start matching at. This allows lookbehinds to work when searching for multiple
2344     occurrences in a string.
2345    
2346     3. Added additional options to pcretest for testing multiple occurrences:
2347    
2348     /+ outputs the rest of the string that follows a match
2349     /g loops for multiple occurrences, using the new startoffset argument
2350     /G loops for multiple occurrences by passing an incremented pointer
2351    
2352     4. PCRE wasn't doing the "first character" optimization for patterns starting
2353     with \b or \B, though it was doing it for other lookbehind assertions. That is,
2354     it wasn't noticing that a match for a pattern such as /\bxyz/ has to start with
2355     the letter 'x'. On long subject strings, this gives a significant speed-up.
2356    
2357    
2358 nigel 33 Version 2.05 21-Apr-99
2359     ----------------------
2360    
2361     1. Changed the type of magic_number from int to long int so that it works
2362     properly on 16-bit systems.
2363    
2364     2. Fixed a bug which caused patterns starting with .* not to work correctly
2365     when the subject string contained newline characters. PCRE was assuming
2366     anchoring for such patterns in all cases, which is not correct because .* will
2367     not pass a newline unless PCRE_DOTALL is set. It now assumes anchoring only if
2368     DOTALL is set at top level; otherwise it knows that patterns starting with .*
2369     must be retried after every newline in the subject.
2370    
2371    
2372 nigel 31 Version 2.04 18-Feb-99
2373     ----------------------
2374    
2375     1. For parenthesized subpatterns with repeats whose minimum was zero, the
2376     computation of the store needed to hold the pattern was incorrect (too large).
2377     If such patterns were nested a few deep, this could multiply and become a real
2378     problem.
2379    
2380     2. Added /M option to pcretest to show the memory requirement of a specific
2381     pattern. Made -m a synonym of -s (which does this globally) for compatibility.
2382    
2383     3. Subpatterns of the form (regex){n,m} (i.e. limited maximum) were being
2384     compiled in such a way that the backtracking after subsequent failure was
2385     pessimal. Something like (a){0,3} was compiled as (a)?(a)?(a)? instead of
2386     ((a)((a)(a)?)?)? with disastrous performance if the maximum was of any size.
2387    
2388    
2389 nigel 29 Version 2.03 02-Feb-99
2390     ----------------------
2391    
2392     1. Fixed typo and small mistake in man page.
2393    
2394 nigel 31 2. Added 4th condition (GPL supersedes if conflict) and created separate
2395     LICENCE file containing the conditions.
2396 nigel 29
2397     3. Updated pcretest so that patterns such as /abc\/def/ work like they do in
2398     Perl, that is the internal \ allows the delimiter to be included in the
2399     pattern. Locked out the use of \ as a delimiter. If \ immediately follows
2400     the final delimiter, add \ to the end of the pattern (to test the error).
2401    
2402     4. Added the convenience functions for extracting substrings after a successful
2403     match. Updated pcretest to make it able to test these functions.
2404    
2405    
2406 nigel 27 Version 2.02 14-Jan-99
2407     ----------------------
2408    
2409     1. Initialized the working variables associated with each extraction so that
2410     their saving and restoring doesn't refer to uninitialized store.
2411    
2412     2. Put dummy code into study.c in order to trick the optimizer of the IBM C
2413     compiler for OS/2 into generating correct code. Apparently IBM isn't going to
2414     fix the problem.
2415    
2416     3. Pcretest: the timing code wasn't using LOOPREPEAT for timing execution
2417     calls, and wasn't printing the correct value for compiling calls. Increased the
2418     default value of LOOPREPEAT, and the number of significant figures in the
2419     times.
2420    
2421     4. Changed "/bin/rm" in the Makefile to "-rm" so it works on Windows NT.
2422    
2423     5. Renamed "deftables" as "dftables" to get it down to 8 characters, to avoid
2424     a building problem on Windows NT with a FAT file system.
2425    
2426    
2427 nigel 25 Version 2.01 21-Oct-98
2428     ----------------------
2429    
2430     1. Changed the API for pcre_compile() to allow for the provision of a pointer
2431     to character tables built by pcre_maketables() in the current locale. If NULL
2432     is passed, the default tables are used.
2433    
2434    
2435 nigel 23 Version 2.00 24-Sep-98
2436 nigel 21 ----------------------
2437    
2438 nigel 23 1. Since the (>?) facility is in Perl 5.005, don't require PCRE_EXTRA to enable
2439     it any more.
2440    
2441     2. Allow quantification of (?>) groups, and make it work correctly.
2442    
2443     3. The first character computation wasn't working for (?>) groups.
2444    
2445     4. Correct the implementation of \Z (it is permitted to match on the \n at the
2446     end of the subject) and add 5.005's \z, which really does match only at the
2447     very end of the subject.
2448    
2449     5. Remove the \X "cut" facility; Perl doesn't have it, and (?> is neater.
2450    
2451     6. Remove the ability to specify CASELESS, MULTILINE, DOTALL, and
2452     DOLLAR_END_ONLY at runtime, to make it possible to implement the Perl 5.005
2453     localized options. All options to pcre_study() were also removed.
2454    
2455     7. Add other new features from 5.005:
2456    
2457     $(?<= positive lookbehind
2458     $(?<! negative lookbehind
2459     (?imsx-imsx) added the unsetting capability
2460     such a setting is global if at outer level; local otherwise
2461     (?imsx-imsx:) non-capturing groups with option setting
2462     (?(cond)re|re) conditional pattern matching
2463    
2464     A backreference to itself in a repeated group matches the previous
2465     captured string.
2466    
2467     8. General tidying up of studying (both automatic and via "study")
2468     consequential on the addition of new assertions.
2469    
2470     9. As in 5.005, unlimited repeated groups that could match an empty substring
2471     are no longer faulted at compile time. Instead, the loop is forcibly broken at
2472     runtime if any iteration does actually match an empty substring.
2473    
2474     10. Include the RunTest script in the distribution.
2475    
2476     11. Added tests from the Perl 5.005_02 distribution. This showed up a few
2477     discrepancies, some of which were old and were also with respect to 5.004. They
2478     have now been fixed.
2479    
2480    
2481     Version 1.09 28-Apr-98
2482     ----------------------
2483    
2484 nigel 21 1. A negated single character class followed by a quantifier with a minimum
2485     value of one (e.g. [^x]{1,6} ) was not compiled correctly. This could lead to
2486     program crashes, or just wrong answers. This did not apply to negated classes
2487     containing more than one character, or to minima other than one.
2488    
2489    
2490 nigel 19 Version 1.08 27-Mar-98
2491     ----------------------
2492    
2493     1. Add PCRE_UNGREEDY to invert the greediness of quantifiers.
2494    
2495     2. Add (?U) and (?X) to set PCRE_UNGREEDY and PCRE_EXTRA respectively. The
2496     latter must appear before anything that relies on it in the pattern.
2497    
2498    
2499 nigel 17 Version 1.07 16-Feb-98
2500     ----------------------
2501    
2502     1. A pattern such as /((a)*)*/ was not being diagnosed as in error (unlimited
2503     repeat of a potentially empty string).
2504    
2505    
2506 nigel 15 Version 1.06 23-Jan-98
2507     ----------------------
2508    
2509     1. Added Markus Oberhumer's little patches for C++.
2510    
2511     2. Literal strings longer than 255 characters were broken.
2512    
2513    
2514 nigel 13 Version 1.05 23-Dec-97
2515     ----------------------
2516    
2517     1. Negated character classes containing more than one character were failing if
2518     PCRE_CASELESS was set at run time.
2519    
2520    
2521 nigel 11 Version 1.04 19-Dec-97
2522     ----------------------
2523    
2524     1. Corrected the man page, where some "const" qualifiers had been omitted.
2525    
2526     2. Made debugging output print "{0,xxx}" instead of just "{,xxx}" to agree with
2527     input syntax.
2528    
2529     3. Fixed memory leak which occurred when a regex with back references was
2530     matched with an offsets vector that wasn't big enough. The temporary memory
2531     that is used in this case wasn't being freed if the match failed.
2532    
2533     4. Tidied pcretest to ensure it frees memory that it gets.
2534    
2535     5. Temporary memory was being obtained in the case where the passed offsets
2536     vector was exactly big enough.
2537    
2538     6. Corrected definition of offsetof() from change 5 below.
2539    
2540     7. I had screwed up change 6 below and broken the rules for the use of
2541     setjmp(). Now fixed.
2542    
2543    
2544 nigel 9 Version 1.03 18-Dec-97
2545     ----------------------
2546    
2547     1. A erroneous regex with a missing opening parenthesis was correctly
2548     diagnosed, but PCRE attempted to access brastack[-1], which could cause crashes
2549     on some systems.
2550    
2551     2. Replaced offsetof(real_pcre, code) by offsetof(real_pcre, code[0]) because
2552     it was reported that one broken compiler failed on the former because "code" is
2553     also an independent variable.
2554    
2555     3. The erroneous regex a[]b caused an array overrun reference.
2556    
2557     4. A regex ending with a one-character negative class (e.g. /[^k]$/) did not
2558     fail on data ending with that character. (It was going on too far, and checking
2559     the next character, typically a binary zero.) This was specific to the
2560     optimized code for single-character negative classes.
2561    
2562     5. Added a contributed patch from the TIN world which does the following:
2563    
2564     + Add an undef for memmove, in case the the system defines a macro for it.
2565    
2566     + Add a definition of offsetof(), in case there isn't one. (I don't know
2567     the reason behind this - offsetof() is part of the ANSI standard - but
2568     it does no harm).
2569    
2570     + Reduce the ifdef's in pcre.c using macro DPRINTF, thereby eliminating
2571     most of the places where whitespace preceded '#'. I have given up and
2572     allowed the remaining 2 cases to be at the margin.
2573    
2574     + Rename some variables in pcre to eliminate shadowing. This seems very
2575     pedantic, but does no harm, of course.
2576    
2577     6. Moved the call to setjmp() into its own function, to get rid of warnings
2578     from gcc -Wall, and avoided calling it at all unless PCRE_EXTRA is used.
2579    
2580     7. Constructs such as \d{8,} were compiling into the equivalent of
2581 nigel 11 \d{8}\d{0,65527} instead of \d{8}\d* which didn't make much difference to the
2582 nigel 9 outcome, but in this particular case used more store than had been allocated,
2583     which caused the bug to be discovered because it threw up an internal error.
2584    
2585     8. The debugging code in both pcre and pcretest for outputting the compiled
2586     form of a regex was going wrong in the case of back references followed by
2587     curly-bracketed repeats.
2588    
2589    
2590 nigel 7 Version 1.02 12-Dec-97
2591     ----------------------
2592    
2593     1. Typos in pcre.3 and comments in the source fixed.
2594    
2595     2. Applied a contributed patch to get rid of places where it used to remove
2596     'const' from variables, and fixed some signed/unsigned and uninitialized
2597     variable warnings.
2598    
2599     3. Added the "runtest" target to Makefile.
2600    
2601     4. Set default compiler flag to -O2 rather than just -O.
2602    
2603    
2604 nigel 5 Version 1.01 19-Nov-97
2605     ----------------------
2606    
2607     1. PCRE was failing to diagnose unlimited repeat of empty string for patterns
2608     like /([ab]*)*/, that is, for classes with more than one character in them.
2609    
2610     2. Likewise, it wasn't diagnosing patterns with "once-only" subpatterns, such
2611     as /((?>a*))*/ (a PCRE_EXTRA facility).
2612    
2613    
2614     Version 1.00 18-Nov-97
2615     ----------------------
2616    
2617     1. Added compile-time macros to support systems such as SunOS4 which don't have
2618     memmove() or strerror() but have other things that can be used instead.
2619    
2620     2. Arranged that "make clean" removes the executables.
2621    
2622    
2623 nigel 3 Version 0.99 27-Oct-97
2624     ----------------------
2625    
2626     1. Fixed bug in code for optimizing classes with only one character. It was
2627     initializing a 32-byte map regardless, which could cause it to run off the end
2628     of the memory it had got.
2629    
2630     2. Added, conditional on PCRE_EXTRA, the proposed (?>REGEX) construction.
2631    
2632    
2633     Version 0.98 22-Oct-97
2634     ----------------------
2635    
2636     1. Fixed bug in code for handling temporary memory usage when there are more
2637     back references than supplied space in the ovector. This could cause segfaults.
2638    
2639    
2640     Version 0.97 21-Oct-97
2641     ----------------------
2642    
2643     1. Added the \X "cut" facility, conditional on PCRE_EXTRA.
2644    
2645     2. Optimized negated single characters not to use a bit map.
2646    
2647     3. Brought error texts together as macro definitions; clarified some of them;
2648     fixed one that was wrong - it said "range out of order" when it meant "invalid
2649     escape sequence".
2650    
2651     4. Changed some char * arguments to const char *.
2652    
2653     5. Added PCRE_NOTBOL and PCRE_NOTEOL (from POSIX).
2654    
2655     6. Added the POSIX-style API wrapper in pcreposix.a and testing facilities in
2656     pcretest.
2657    
2658    
2659     Version 0.96 16-Oct-97
2660     ----------------------
2661    
2662     1. Added a simple "pgrep" utility to the distribution.
2663    
2664     2. Fixed an incompatibility with Perl: "{" is now treated as a normal character
2665     unless it appears in one of the precise forms "{ddd}", "{ddd,}", or "{ddd,ddd}"
2666     where "ddd" means "one or more decimal digits".
2667    
2668     3. Fixed serious bug. If a pattern had a back reference, but the call to
2669     pcre_exec() didn't supply a large enough ovector to record the related
2670     identifying subpattern, the match always failed. PCRE now remembers the number
2671     of the largest back reference, and gets some temporary memory in which to save
2672     the offsets during matching if necessary, in order to ensure that
2673     backreferences always work.
2674    
2675     4. Increased the compatibility with Perl in a number of ways:
2676    
2677     (a) . no longer matches \n by default; an option PCRE_DOTALL is provided
2678     to request this handling. The option can be set at compile or exec time.
2679    
2680     (b) $ matches before a terminating newline by default; an option
2681     PCRE_DOLLAR_ENDONLY is provided to override this (but not in multiline
2682     mode). The option can be set at compile or exec time.
2683    
2684     (c) The handling of \ followed by a digit other than 0 is now supposed to be
2685     the same as Perl's. If the decimal number it represents is less than 10
2686     or there aren't that many previous left capturing parentheses, an octal
2687     escape is read. Inside a character class, it's always an octal escape,
2688     even if it is a single digit.
2689    
2690     (d) An escaped but undefined alphabetic character is taken as a literal,
2691     unless PCRE_EXTRA is set. Currently this just reserves the remaining
2692     escapes.
2693    
2694     (e) {0} is now permitted. (The previous item is removed from the compiled
2695     pattern).
2696    
2697     5. Changed all the names of code files so that the basic parts are no longer
2698     than 10 characters, and abolished the teeny "globals.c" file.
2699    
2700     6. Changed the handling of character classes; they are now done with a 32-byte
2701     bit map always.
2702    
2703     7. Added the -d and /D options to pcretest to make it possible to look at the
2704     internals of compilation without having to recompile pcre.
2705    
2706    
2707     Version 0.95 23-Sep-97
2708     ----------------------
2709    
2710     1. Fixed bug in pre-pass concerning escaped "normal" characters such as \x5c or
2711     \x20 at the start of a run of normal characters. These were being treated as
2712     real characters, instead of the source characters being re-checked.
2713    
2714    
2715     Version 0.94 18-Sep-97
2716     ----------------------
2717    
2718     1. The functions are now thread-safe, with the caveat that the global variables
2719     containing pointers to malloc() and free() or alternative functions are the
2720     same for all threads.
2721    
2722     2. Get pcre_study() to generate a bitmap of initial characters for non-
2723     anchored patterns when this is possible, and use it if passed to pcre_exec().
2724    
2725    
2726     Version 0.93 15-Sep-97
2727     ----------------------
2728    
2729     1. /(b)|(:+)/ was computing an incorrect first character.
2730    
2731     2. Add pcre_study() to the API and the passing of pcre_extra to pcre_exec(),
2732     but not actually doing anything yet.
2733    
2734     3. Treat "-" characters in classes that cannot be part of ranges as literals,
2735     as Perl does (e.g. [-az] or [az-]).
2736    
2737     4. Set the anchored flag if a branch starts with .* or .*? because that tests
2738     all possible positions.
2739    
2740     5. Split up into different modules to avoid including unneeded functions in a
2741     compiled binary. However, compile and exec are still in one module. The "study"
2742     function is split off.
2743    
2744     6. The character tables are now in a separate module whose source is generated
2745     by an auxiliary program - but can then be edited by hand if required. There are
2746     now no calls to isalnum(), isspace(), isdigit(), isxdigit(), tolower() or
2747     toupper() in the code.
2748    
2749     7. Turn the malloc/free funtions variables into pcre_malloc and pcre_free and
2750     make them global. Abolish the function for setting them, as the caller can now
2751     set them directly.
2752    
2753    
2754     Version 0.92 11-Sep-97
2755     ----------------------
2756    
2757     1. A repeat with a fixed maximum and a minimum of 1 for an ordinary character
2758     (e.g. /a{1,3}/) was broken (I mis-optimized it).
2759    
2760     2. Caseless matching was not working in character classes if the characters in
2761     the pattern were in upper case.
2762    
2763     3. Make ranges like [W-c] work in the same way as Perl for caseless matching.
2764    
2765     4. Make PCRE_ANCHORED public and accept as a compile option.
2766    
2767     5. Add an options word to pcre_exec() and accept PCRE_ANCHORED and
2768     PCRE_CASELESS at run time. Add escapes \A and \I to pcretest to cause it to
2769     pass them.
2770    
2771     6. Give an error if bad option bits passed at compile or run time.
2772    
2773     7. Add PCRE_MULTILINE at compile and exec time, and (?m) as well. Add \M to
2774     pcretest to cause it to pass that flag.
2775    
2776     8. Add pcre_info(), to get the number of identifying subpatterns, the stored
2777     options, and the first character, if set.
2778    
2779     9. Recognize C+ or C{n,m} where n >= 1 as providing a fixed starting character.
2780    
2781    
2782     Version 0.91 10-Sep-97
2783     ----------------------
2784    
2785     1. PCRE was failing to diagnose unlimited repeats of subpatterns that could
2786     match the empty string as in /(a*)*/. It was looping and ultimately crashing.
2787    
2788     2. PCRE was looping on encountering an indefinitely repeated back reference to
2789     a subpattern that had matched an empty string, e.g. /(a|)\1*/. It now does what
2790     Perl does - treats the match as successful.
2791    
2792     ****

Properties

Name Value
svn:eol-style native
svn:keywords "Author Date Id Revision Url"

webmaster@exim.org
ViewVC Help
Powered by ViewVC 1.1.12