/[pcre]/code/trunk/ChangeLog
ViewVC logotype

Contents of /code/trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 184 - (hide annotations) (download)
Tue Jun 19 13:26:46 2007 UTC (7 years, 2 months ago) by ph10
File size: 129921 byte(s)
Fix non-UTF-8 mode Unicode properties bug; prepare for 7.2 release.

1 nigel 3 ChangeLog for PCRE
2     ------------------
3    
4 ph10 184 Version 7.2 19-June-07
5 ph10 157 ---------------------
6    
7     1. If the fr_FR locale cannot be found for test 3, try the "french" locale,
8     which is apparently normally available under Windows.
9 ph10 159
10     2. Re-jig the pcregrep tests with different newline settings in an attempt
11     to make them independent of the local environment's newline setting.
12 ph10 157
13 ph10 160 3. Add code to configure.ac to remove -g from the CFLAGS default settings.
14 ph10 165
15 ph10 161 4. Some of the "internals" tests were previously cut out when the link size
16     was not 2, because the output contained actual offsets. The recent new
17 ph10 165 "Z" feature of pcretest means that these can be cut out, making the tests
18     usable with all link sizes.
19    
20 ph10 164 5. Implemented Stan Switzer's goto replacement for longjmp() when not using
21     stack recursion. This gives a massive performance boost under BSD, but just
22 ph10 165 a small improvement under Linux. However, it saves one field in the frame
23 ph10 164 in all cases.
24 ph10 172
25 ph10 166 6. Added more features from the forthcoming Perl 5.10:
26 ph10 172
27 ph10 166 (a) (?-n) (where n is a string of digits) is a relative subroutine or
28     recursion call. It refers to the nth most recently opened parentheses.
29 ph10 172
30 ph10 166 (b) (?+n) is also a relative subroutine call; it refers to the nth next
31 ph10 172 to be opened parentheses.
32    
33     (c) Conditions that refer to capturing parentheses can be specified
34 ph10 167 relatively, for example, (?(-2)... or (?(+3)...
35 ph10 172
36 ph10 168 (d) \K resets the start of the current match so that everything before
37 ph10 172 is not part of it.
38    
39 ph10 171 (e) \k{name} is synonymous with \k<name> and \k'name' (.NET compatible).
40 ph10 172
41 ph10 171 (f) \g{name} is another synonym - part of Perl 5.10's unification of
42 ph10 172 reference syntax.
43 ph10 182
44 ph10 175 (g) (?| introduces a group in which the numbering of parentheses in each
45 ph10 182 alternative starts with the same number.
46 ph10 172
47 ph10 182 (h) \h, \H, \v, and \V match horizontal and vertical whitespace.
48    
49 ph10 172 7. Added two new calls to pcre_fullinfo(): PCRE_INFO_OKPARTIAL and
50     PCRE_INFO_JCHANGED.
51    
52     8. A pattern such as (.*(.)?)* caused pcre_exec() to fail by either not
53     terminating or by crashing. Diagnosed by Viktor Griph; it was in the code
54 ph10 170 for detecting groups that can match an empty string.
55 ph10 159
56 ph10 172 9. A pattern with a very large number of alternatives (more than several
57     hundred) was running out of internal workspace during the pre-compile
58     phase, where pcre_compile() figures out how much memory will be needed. A
59     bit of new cunning has reduced the workspace needed for groups with
60     alternatives. The 1000-alternative test pattern now uses 12 bytes of
61     workspace instead of running out of the 4096 that are available.
62 ph10 182
63 ph10 176 10. Inserted some missing (unsigned int) casts to get rid of compiler warnings.
64 ph10 172
65 ph10 179 11. Applied patch from Google to remove an optimization that didn't quite work.
66     The report of the bug said:
67 ph10 182
68 ph10 179 pcrecpp::RE("a*").FullMatch("aaa") matches, while
69     pcrecpp::RE("a*?").FullMatch("aaa") does not, and
70 ph10 182 pcrecpp::RE("a*?\\z").FullMatch("aaa") does again.
71 ph10 184
72     12. If \p or \P was used in non-UTF-8 mode on a character greater than 127
73     it matched the wrong number of bytes.
74 ph10 172
75 ph10 179
76 ph10 155 Version 7.1 24-Apr-07
77 ph10 98 ---------------------
78    
79 ph10 111 1. Applied Bob Rossi and Daniel G's patches to convert the build system to one
80 ph10 122 that is more "standard", making use of automake and other Autotools. There
81 ph10 99 is some re-arrangement of the files and adjustment of comments consequent
82     on this.
83 ph10 111
84     2. Part of the patch fixed a problem with the pcregrep tests. The test of -r
85     for recursive directory scanning broke on some systems because the files
86     are not scanned in any specific order and on different systems the order
87     was different. A call to "sort" has been inserted into RunGrepTest for the
88     approprate test as a short-term fix. In the longer term there may be an
89 ph10 100 alternative.
90 ph10 111
91 ph10 100 3. I had an email from Eric Raymond about problems translating some of PCRE's
92 ph10 111 man pages to HTML (despite the fact that I distribute HTML pages, some
93     people do their own conversions for various reasons). The problems
94     concerned the use of low-level troff macros .br and .in. I have therefore
95     removed all such uses from the man pages (some were redundant, some could
96 ph10 113 be replaced by .nf/.fi pairs). The 132html script that I use to generate
97     HTML has been updated to handle .nf/.fi and to complain if it encounters
98     .br or .in.
99 ph10 111
100 ph10 100 4. Updated comments in configure.ac that get placed in config.h.in and also
101 ph10 123 arranged for config.h to be included in the distribution, with the name
102 ph10 111 config.h.generic, for the benefit of those who have to compile without
103     Autotools (compare pcre.h, which is now distributed as pcre.h.generic).
104    
105     5. Updated the support (such as it is) for Virtual Pascal, thanks to Stefan
106     Weber: (1) pcre_internal.h was missing some function renames; (2) updated
107 ph10 127 makevp.bat for the current PCRE, using the additional files
108 ph10 135 makevp_c.txt, makevp_l.txt, and pcregexp.pas.
109 ph10 111
110     6. A Windows user reported a minor discrepancy with test 2, which turned out
111     to be caused by a trailing space on an input line that had got lost in his
112 ph10 102 copy. The trailing space was an accident, so I've just removed it.
113 ph10 111
114 ph10 104 7. Add -Wl,-R... flags in pcre-config.in for *BSD* systems, as I'm told
115 ph10 111 that is needed.
116    
117 ph10 105 8. Mark ucp_table (in ucptable.h) and ucp_gentype (in pcre_ucp_searchfuncs.c)
118     as "const" (a) because they are and (b) because it helps the PHP
119     maintainers who have recently made a script to detect big data structures
120 ph10 111 in the php code that should be moved to the .rodata section. I remembered
121     to update Builducptable as well, so it won't revert if ucptable.h is ever
122 ph10 105 re-created.
123 ph10 111
124     9. Added some extra #ifdef SUPPORT_UTF8 conditionals into pcretest.c,
125 ph10 107 pcre_printint.src, pcre_compile.c, pcre_study.c, and pcre_tables.c, in
126 ph10 111 order to be able to cut out the UTF-8 tables in the latter when UTF-8
127     support is not required. This saves 1.5-2K of code, which is important in
128 ph10 107 some applications.
129 ph10 111
130 ph10 110 Later: more #ifdefs are needed in pcre_ord2utf8.c and pcre_valid_utf8.c
131 ph10 111 so as not to refer to the tables, even though these functions will never be
132     called when UTF-8 support is disabled. Otherwise there are problems with a
133     shared library.
134    
135 ph10 118 10. Fixed two bugs in the emulated memmove() function in pcre_internal.h:
136    
137     (a) It was defining its arguments as char * instead of void *.
138    
139 ph10 123 (b) It was assuming that all moves were upwards in memory; this was true
140     a long time ago when I wrote it, but is no longer the case.
141    
142 ph10 118 The emulated memove() is provided for those environments that have neither
143 ph10 123 memmove() nor bcopy(). I didn't think anyone used it these days, but that
144 ph10 118 is clearly not the case, as these two bugs were recently reported.
145 ph10 123
146 ph10 111 11. The script PrepareRelease is now distributed: it calls 132html, CleanTxt,
147 ph10 123 and Detrail to create the HTML documentation, the .txt form of the man
148     pages, and it removes trailing spaces from listed files. It also creates
149     pcre.h.generic and config.h.generic from pcre.h and config.h. In the latter
150     case, it wraps all the #defines with #ifndefs. This script should be run
151 ph10 111 before "make dist".
152 ph10 123
153 ph10 115 12. Fixed two fairly obscure bugs concerned with quantified caseless matching
154     with Unicode property support.
155 ph10 123
156     (a) For a maximizing quantifier, if the two different cases of the
157     character were of different lengths in their UTF-8 codings (there are
158     some cases like this - I found 11), and the matching function had to
159 ph10 115 back up over a mixture of the two cases, it incorrectly assumed they
160     were both the same length.
161 ph10 123
162     (b) When PCRE was configured to use the heap rather than the stack for
163     recursion during matching, it was not correctly preserving the data for
164     the other case of a UTF-8 character when checking ahead for a match
165     while processing a minimizing repeat. If the check also involved
166 ph10 115 matching a wide character, but failed, corruption could cause an
167     erroneous result when trying to check for a repeat of the original
168     character.
169 ph10 123
170 ph10 116 13. Some tidying changes to the testing mechanism:
171 ph10 98
172 ph10 116 (a) The RunTest script now detects the internal link size and whether there
173     is UTF-8 and UCP support by running ./pcretest -C instead of relying on
174 ph10 123 values substituted by "configure". (The RunGrepTest script already did
175     this for UTF-8.) The configure.ac script no longer substitutes the
176     relevant variables.
177    
178 ph10 116 (b) The debugging options /B and /D in pcretest show the compiled bytecode
179     with length and offset values. This means that the output is different
180     for different internal link sizes. Test 2 is skipped for link sizes
181     other than 2 because of this, bypassing the problem. Unfortunately,
182     there was also a test in test 3 (the locale tests) that used /B and
183 ph10 123 failed for link sizes other than 2. Rather than cut the whole test out,
184     I have added a new /Z option to pcretest that replaces the length and
185     offset values with spaces. This is now used to make test 3 independent
186 ph10 122 of link size. (Test 2 will be tidied up later.)
187 ph10 123
188     14. If erroroffset was passed as NULL to pcre_compile, it provoked a
189 ph10 122 segmentation fault instead of returning the appropriate error message.
190 ph10 134
191 ph10 131 15. In multiline mode when the newline sequence was set to "any", the pattern
192 ph10 134 ^$ would give a match between the \r and \n of a subject such as "A\r\nB".
193     This doesn't seem right; it now treats the CRLF combination as the line
194     ending, and so does not match in that case. It's only a pattern such as ^$
195     that would hit this one: something like ^ABC$ would have failed after \r
196     and then tried again after \r\n.
197    
198 ph10 131 16. Changed the comparison command for RunGrepTest from "diff -u" to "diff -ub"
199 ph10 134 in an attempt to make files that differ only in their line terminators
200     compare equal. This works on Linux.
201 ph10 142
202 ph10 141 17. Under certain error circumstances pcregrep might try to free random memory
203     as it exited. This is now fixed, thanks to valgrind.
204 ph10 142
205 ph10 141 19. In pcretest, if the pattern /(?m)^$/g<any> was matched against the string
206 ph10 142 "abc\r\n\r\n", it found an unwanted second match after the second \r. This
207     was because its rules for how to advance for /g after matching an empty
208 ph10 143 string at the end of a line did not allow for this case. They now check for
209     it specially.
210 ph10 150
211     20. pcretest is supposed to handle patterns and data of any length, by
212     extending its buffers when necessary. It was getting this wrong when the
213 ph10 147 buffer for a data line had to be extended.
214 ph10 150
215 ph10 149 21. Added PCRE_NEWLINE_ANYCRLF which is like ANY, but matches only CR, LF, or
216 ph10 150 CRLF as a newline sequence.
217 ph10 152
218 ph10 151 22. Code for handling Unicode properties in pcre_dfa_exec() wasn't being cut
219 ph10 152 out by #ifdef SUPPORT_UCP. This did no harm, as it could never be used, but
220     I have nevertheless tidied it up.
221 ph10 111
222 ph10 152 23. Added some casts to kill warnings from HP-UX ia64 compiler.
223 ph10 123
224 ph10 153 24. Added a man page for pcre-config.
225 ph10 152
226 ph10 153
227 nigel 93 Version 7.0 19-Dec-06
228     ---------------------
229    
230     1. Fixed a signed/unsigned compiler warning in pcre_compile.c, shown up by
231     moving to gcc 4.1.1.
232    
233     2. The -S option for pcretest uses setrlimit(); I had omitted to #include
234     sys/time.h, which is documented as needed for this function. It doesn't
235     seem to matter on Linux, but it showed up on some releases of OS X.
236    
237     3. It seems that there are systems where bytes whose values are greater than
238     127 match isprint() in the "C" locale. The "C" locale should be the
239     default when a C program starts up. In most systems, only ASCII printing
240     characters match isprint(). This difference caused the output from pcretest
241     to vary, making some of the tests fail. I have changed pcretest so that:
242    
243     (a) When it is outputting text in the compiled version of a pattern, bytes
244     other than 32-126 are always shown as hex escapes.
245    
246     (b) When it is outputting text that is a matched part of a subject string,
247     it does the same, unless a different locale has been set for the match
248     (using the /L modifier). In this case, it uses isprint() to decide.
249    
250     4. Fixed a major bug that caused incorrect computation of the amount of memory
251     required for a compiled pattern when options that changed within the
252     pattern affected the logic of the preliminary scan that determines the
253     length. The relevant options are -x, and -i in UTF-8 mode. The result was
254     that the computed length was too small. The symptoms of this bug were
255     either the PCRE error "internal error: code overflow" from pcre_compile(),
256     or a glibc crash with a message such as "pcretest: free(): invalid next
257     size (fast)". Examples of patterns that provoked this bug (shown in
258     pcretest format) are:
259    
260     /(?-x: )/x
261     /(?x)(?-x: \s*#\s*)/
262     /((?i)[\x{c0}])/8
263     /(?i:[\x{c0}])/8
264    
265     HOWEVER: Change 17 below makes this fix obsolete as the memory computation
266     is now done differently.
267    
268     5. Applied patches from Google to: (a) add a QuoteMeta function to the C++
269     wrapper classes; (b) implement a new function in the C++ scanner that is
270     more efficient than the old way of doing things because it avoids levels of
271     recursion in the regex matching; (c) add a paragraph to the documentation
272     for the FullMatch() function.
273    
274     6. The escape sequence \n was being treated as whatever was defined as
275     "newline". Not only was this contrary to the documentation, which states
276     that \n is character 10 (hex 0A), but it also went horribly wrong when
277     "newline" was defined as CRLF. This has been fixed.
278    
279     7. In pcre_dfa_exec.c the value of an unsigned integer (the variable called c)
280     was being set to -1 for the "end of line" case (supposedly a value that no
281     character can have). Though this value is never used (the check for end of
282     line is "zero bytes in current character"), it caused compiler complaints.
283     I've changed it to 0xffffffff.
284    
285     8. In pcre_version.c, the version string was being built by a sequence of
286     C macros that, in the event of PCRE_PRERELEASE being defined as an empty
287     string (as it is for production releases) called a macro with an empty
288     argument. The C standard says the result of this is undefined. The gcc
289     compiler treats it as an empty string (which was what was wanted) but it is
290     reported that Visual C gives an error. The source has been hacked around to
291     avoid this problem.
292    
293     9. On the advice of a Windows user, included <io.h> and <fcntl.h> in Windows
294     builds of pcretest, and changed the call to _setmode() to use _O_BINARY
295     instead of 0x8000. Made all the #ifdefs test both _WIN32 and WIN32 (not all
296     of them did).
297    
298     10. Originally, pcretest opened its input and output without "b"; then I was
299     told that "b" was needed in some environments, so it was added for release
300     5.0 to both the input and output. (It makes no difference on Unix-like
301     systems.) Later I was told that it is wrong for the input on Windows. I've
302     now abstracted the modes into two macros, to make it easier to fiddle with
303     them, and removed "b" from the input mode under Windows.
304    
305     11. Added pkgconfig support for the C++ wrapper library, libpcrecpp.
306    
307     12. Added -help and --help to pcretest as an official way of being reminded
308     of the options.
309    
310     13. Removed some redundant semicolons after macro calls in pcrecpparg.h.in
311     and pcrecpp.cc because they annoy compilers at high warning levels.
312    
313     14. A bit of tidying/refactoring in pcre_exec.c in the main bumpalong loop.
314    
315     15. Fixed an occurrence of == in configure.ac that should have been = (shell
316     scripts are not C programs :-) and which was not noticed because it works
317     on Linux.
318    
319     16. pcretest is supposed to handle any length of pattern and data line (as one
320     line or as a continued sequence of lines) by extending its input buffer if
321     necessary. This feature was broken for very long pattern lines, leading to
322     a string of junk being passed to pcre_compile() if the pattern was longer
323     than about 50K.
324    
325     17. I have done a major re-factoring of the way pcre_compile() computes the
326     amount of memory needed for a compiled pattern. Previously, there was code
327     that made a preliminary scan of the pattern in order to do this. That was
328     OK when PCRE was new, but as the facilities have expanded, it has become
329     harder and harder to keep it in step with the real compile phase, and there
330     have been a number of bugs (see for example, 4 above). I have now found a
331     cunning way of running the real compile function in a "fake" mode that
332     enables it to compute how much memory it would need, while actually only
333     ever using a few hundred bytes of working memory and without too many
334     tests of the mode. This should make future maintenance and development
335     easier. A side effect of this work is that the limit of 200 on the nesting
336     depth of parentheses has been removed (though this was never a serious
337     limitation, I suspect). However, there is a downside: pcre_compile() now
338     runs more slowly than before (30% or more, depending on the pattern). I
339     hope this isn't a big issue. There is no effect on runtime performance.
340    
341     18. Fixed a minor bug in pcretest: if a pattern line was not terminated by a
342     newline (only possible for the last line of a file) and it was a
343     pattern that set a locale (followed by /Lsomething), pcretest crashed.
344    
345     19. Added additional timing features to pcretest. (1) The -tm option now times
346     matching only, not compiling. (2) Both -t and -tm can be followed, as a
347     separate command line item, by a number that specifies the number of
348     repeats to use when timing. The default is 50000; this gives better
349     precision, but takes uncomfortably long for very large patterns.
350    
351     20. Extended pcre_study() to be more clever in cases where a branch of a
352     subpattern has no definite first character. For example, (a*|b*)[cd] would
353     previously give no result from pcre_study(). Now it recognizes that the
354     first character must be a, b, c, or d.
355    
356     21. There was an incorrect error "recursive call could loop indefinitely" if
357     a subpattern (or the entire pattern) that was being tested for matching an
358     empty string contained only one non-empty item after a nested subpattern.
359     For example, the pattern (?>\x{100}*)\d(?R) provoked this error
360     incorrectly, because the \d was being skipped in the check.
361    
362     22. The pcretest program now has a new pattern option /B and a command line
363     option -b, which is equivalent to adding /B to every pattern. This causes
364     it to show the compiled bytecode, without the additional information that
365     -d shows. The effect of -d is now the same as -b with -i (and similarly, /D
366     is the same as /B/I).
367    
368     23. A new optimization is now able automatically to treat some sequences such
369     as a*b as a*+b. More specifically, if something simple (such as a character
370     or a simple class like \d) has an unlimited quantifier, and is followed by
371     something that cannot possibly match the quantified thing, the quantifier
372     is automatically "possessified".
373    
374     24. A recursive reference to a subpattern whose number was greater than 39
375     went wrong under certain circumstances in UTF-8 mode. This bug could also
376     have affected the operation of pcre_study().
377    
378     25. Realized that a little bit of performance could be had by replacing
379     (c & 0xc0) == 0xc0 with c >= 0xc0 when processing UTF-8 characters.
380    
381     26. Timing data from pcretest is now shown to 4 decimal places instead of 3.
382    
383     27. Possessive quantifiers such as a++ were previously implemented by turning
384     them into atomic groups such as ($>a+). Now they have their own opcodes,
385     which improves performance. This includes the automatically created ones
386     from 23 above.
387    
388     28. A pattern such as (?=(\w+))\1: which simulates an atomic group using a
389     lookahead was broken if it was not anchored. PCRE was mistakenly expecting
390     the first matched character to be a colon. This applied both to named and
391     numbered groups.
392    
393     29. The ucpinternal.h header file was missing its idempotency #ifdef.
394    
395     30. I was sent a "project" file called libpcre.a.dev which I understand makes
396     building PCRE on Windows easier, so I have included it in the distribution.
397    
398     31. There is now a check in pcretest against a ridiculously large number being
399     returned by pcre_exec() or pcre_dfa_exec(). If this happens in a /g or /G
400     loop, the loop is abandoned.
401    
402     32. Forward references to subpatterns in conditions such as (?(2)...) where
403     subpattern 2 is defined later cause pcre_compile() to search forwards in
404     the pattern for the relevant set of parentheses. This search went wrong
405     when there were unescaped parentheses in a character class, parentheses
406     escaped with \Q...\E, or parentheses in a #-comment in /x mode.
407    
408     33. "Subroutine" calls and backreferences were previously restricted to
409     referencing subpatterns earlier in the regex. This restriction has now
410     been removed.
411    
412     34. Added a number of extra features that are going to be in Perl 5.10. On the
413     whole, these are just syntactic alternatives for features that PCRE had
414     previously implemented using the Python syntax or my own invention. The
415     other formats are all retained for compatibility.
416    
417     (a) Named groups can now be defined as (?<name>...) or (?'name'...) as well
418     as (?P<name>...). The new forms, as well as being in Perl 5.10, are
419     also .NET compatible.
420    
421     (b) A recursion or subroutine call to a named group can now be defined as
422     (?&name) as well as (?P>name).
423    
424     (c) A backreference to a named group can now be defined as \k<name> or
425     \k'name' as well as (?P=name). The new forms, as well as being in Perl
426     5.10, are also .NET compatible.
427    
428     (d) A conditional reference to a named group can now use the syntax
429     (?(<name>) or (?('name') as well as (?(name).
430    
431     (e) A "conditional group" of the form (?(DEFINE)...) can be used to define
432     groups (named and numbered) that are never evaluated inline, but can be
433     called as "subroutines" from elsewhere. In effect, the DEFINE condition
434     is always false. There may be only one alternative in such a group.
435    
436     (f) A test for recursion can be given as (?(R1).. or (?(R&name)... as well
437     as the simple (?(R). The condition is true only if the most recent
438     recursion is that of the given number or name. It does not search out
439     through the entire recursion stack.
440    
441     (g) The escape \gN or \g{N} has been added, where N is a positive or
442     negative number, specifying an absolute or relative reference.
443    
444     35. Tidied to get rid of some further signed/unsigned compiler warnings and
445     some "unreachable code" warnings.
446    
447     36. Updated the Unicode property tables to Unicode version 5.0.0. Amongst other
448     things, this adds five new scripts.
449    
450     37. Perl ignores orphaned \E escapes completely. PCRE now does the same.
451     There were also incompatibilities regarding the handling of \Q..\E inside
452     character classes, for example with patterns like [\Qa\E-\Qz\E] where the
453     hyphen was adjacent to \Q or \E. I hope I've cleared all this up now.
454    
455     38. Like Perl, PCRE detects when an indefinitely repeated parenthesized group
456     matches an empty string, and forcibly breaks the loop. There were bugs in
457     this code in non-simple cases. For a pattern such as ^(a()*)* matched
458     against aaaa the result was just "a" rather than "aaaa", for example. Two
459     separate and independent bugs (that affected different cases) have been
460     fixed.
461    
462     39. Refactored the code to abolish the use of different opcodes for small
463     capturing bracket numbers. This is a tidy that I avoided doing when I
464     removed the limit on the number of capturing brackets for 3.5 back in 2001.
465     The new approach is not only tidier, it makes it possible to reduce the
466     memory needed to fix the previous bug (38).
467    
468     40. Implemented PCRE_NEWLINE_ANY to recognize any of the Unicode newline
469     sequences (http://unicode.org/unicode/reports/tr18/) as "newline" when
470     processing dot, circumflex, or dollar metacharacters, or #-comments in /x
471     mode.
472    
473     41. Add \R to match any Unicode newline sequence, as suggested in the Unicode
474     report.
475    
476     42. Applied patch, originally from Ari Pollak, modified by Google, to allow
477     copy construction and assignment in the C++ wrapper.
478    
479     43. Updated pcregrep to support "--newline=any". In the process, I fixed a
480     couple of bugs that could have given wrong results in the "--newline=crlf"
481     case.
482    
483     44. Added a number of casts and did some reorganization of signed/unsigned int
484     variables following suggestions from Dair Grant. Also renamed the variable
485     "this" as "item" because it is a C++ keyword.
486    
487     45. Arranged for dftables to add
488    
489     #include "pcre_internal.h"
490    
491     to pcre_chartables.c because without it, gcc 4.x may remove the array
492     definition from the final binary if PCRE is built into a static library and
493     dead code stripping is activated.
494    
495     46. For an unanchored pattern, if a match attempt fails at the start of a
496     newline sequence, and the newline setting is CRLF or ANY, and the next two
497     characters are CRLF, advance by two characters instead of one.
498    
499    
500 nigel 91 Version 6.7 04-Jul-06
501     ---------------------
502    
503     1. In order to handle tests when input lines are enormously long, pcretest has
504     been re-factored so that it automatically extends its buffers when
505     necessary. The code is crude, but this _is_ just a test program. The
506     default size has been increased from 32K to 50K.
507    
508     2. The code in pcre_study() was using the value of the re argument before
509     testing it for NULL. (Of course, in any sensible call of the function, it
510     won't be NULL.)
511    
512     3. The memmove() emulation function in pcre_internal.h, which is used on
513     systems that lack both memmove() and bcopy() - that is, hardly ever -
514     was missing a "static" storage class specifier.
515    
516     4. When UTF-8 mode was not set, PCRE looped when compiling certain patterns
517     containing an extended class (one that cannot be represented by a bitmap
518     because it contains high-valued characters or Unicode property items, e.g.
519     [\pZ]). Almost always one would set UTF-8 mode when processing such a
520     pattern, but PCRE should not loop if you do not (it no longer does).
521     [Detail: two cases were found: (a) a repeated subpattern containing an
522     extended class; (b) a recursive reference to a subpattern that followed a
523     previous extended class. It wasn't skipping over the extended class
524     correctly when UTF-8 mode was not set.]
525    
526     5. A negated single-character class was not being recognized as fixed-length
527     in lookbehind assertions such as (?<=[^f]), leading to an incorrect
528     compile error "lookbehind assertion is not fixed length".
529    
530     6. The RunPerlTest auxiliary script was showing an unexpected difference
531     between PCRE and Perl for UTF-8 tests. It turns out that it is hard to
532     write a Perl script that can interpret lines of an input file either as
533     byte characters or as UTF-8, which is what "perltest" was being required to
534     do for the non-UTF-8 and UTF-8 tests, respectively. Essentially what you
535     can't do is switch easily at run time between having the "use utf8;" pragma
536     or not. In the end, I fudged it by using the RunPerlTest script to insert
537     "use utf8;" explicitly for the UTF-8 tests.
538    
539     7. In multiline (/m) mode, PCRE was matching ^ after a terminating newline at
540     the end of the subject string, contrary to the documentation and to what
541     Perl does. This was true of both matching functions. Now it matches only at
542     the start of the subject and immediately after *internal* newlines.
543    
544     8. A call of pcre_fullinfo() from pcretest to get the option bits was passing
545     a pointer to an int instead of a pointer to an unsigned long int. This
546     caused problems on 64-bit systems.
547    
548     9. Applied a patch from the folks at Google to pcrecpp.cc, to fix "another
549     instance of the 'standard' template library not being so standard".
550    
551     10. There was no check on the number of named subpatterns nor the maximum
552     length of a subpattern name. The product of these values is used to compute
553     the size of the memory block for a compiled pattern. By supplying a very
554     long subpattern name and a large number of named subpatterns, the size
555     computation could be caused to overflow. This is now prevented by limiting
556     the length of names to 32 characters, and the number of named subpatterns
557     to 10,000.
558    
559     11. Subpatterns that are repeated with specific counts have to be replicated in
560     the compiled pattern. The size of memory for this was computed from the
561     length of the subpattern and the repeat count. The latter is limited to
562     65535, but there was no limit on the former, meaning that integer overflow
563     could in principle occur. The compiled length of a repeated subpattern is
564     now limited to 30,000 bytes in order to prevent this.
565    
566     12. Added the optional facility to have named substrings with the same name.
567    
568     13. Added the ability to use a named substring as a condition, using the
569     Python syntax: (?(name)yes|no). This overloads (?(R)... and names that
570     are numbers (not recommended). Forward references are permitted.
571    
572     14. Added forward references in named backreferences (if you see what I mean).
573    
574     15. In UTF-8 mode, with the PCRE_DOTALL option set, a quantified dot in the
575     pattern could run off the end of the subject. For example, the pattern
576     "(?s)(.{1,5})"8 did this with the subject "ab".
577    
578     16. If PCRE_DOTALL or PCRE_MULTILINE were set, pcre_dfa_exec() behaved as if
579     PCRE_CASELESS was set when matching characters that were quantified with ?
580     or *.
581    
582     17. A character class other than a single negated character that had a minimum
583     but no maximum quantifier - for example [ab]{6,} - was not handled
584     correctly by pce_dfa_exec(). It would match only one character.
585    
586     18. A valid (though odd) pattern that looked like a POSIX character
587     class but used an invalid character after [ (for example [[,abc,]]) caused
588     pcre_compile() to give the error "Failed: internal error: code overflow" or
589     in some cases to crash with a glibc free() error. This could even happen if
590     the pattern terminated after [[ but there just happened to be a sequence of
591     letters, a binary zero, and a closing ] in the memory that followed.
592    
593     19. Perl's treatment of octal escapes in the range \400 to \777 has changed
594     over the years. Originally (before any Unicode support), just the bottom 8
595     bits were taken. Thus, for example, \500 really meant \100. Nowadays the
596     output from "man perlunicode" includes this:
597    
598     The regular expression compiler produces polymorphic opcodes. That
599     is, the pattern adapts to the data and automatically switches to
600     the Unicode character scheme when presented with Unicode data--or
601     instead uses a traditional byte scheme when presented with byte
602     data.
603    
604     Sadly, a wide octal escape does not cause a switch, and in a string with
605     no other multibyte characters, these octal escapes are treated as before.
606     Thus, in Perl, the pattern /\500/ actually matches \100 but the pattern
607     /\500|\x{1ff}/ matches \500 or \777 because the whole thing is treated as a
608     Unicode string.
609    
610     I have not perpetrated such confusion in PCRE. Up till now, it took just
611     the bottom 8 bits, as in old Perl. I have now made octal escapes with
612     values greater than \377 illegal in non-UTF-8 mode. In UTF-8 mode they
613     translate to the appropriate multibyte character.
614    
615     29. Applied some refactoring to reduce the number of warnings from Microsoft
616     and Borland compilers. This has included removing the fudge introduced
617     seven years ago for the OS/2 compiler (see 2.02/2 below) because it caused
618     a warning about an unused variable.
619    
620     21. PCRE has not included VT (character 0x0b) in the set of whitespace
621     characters since release 4.0, because Perl (from release 5.004) does not.
622     [Or at least, is documented not to: some releases seem to be in conflict
623     with the documentation.] However, when a pattern was studied with
624     pcre_study() and all its branches started with \s, PCRE still included VT
625     as a possible starting character. Of course, this did no harm; it just
626     caused an unnecessary match attempt.
627    
628     22. Removed a now-redundant internal flag bit that recorded the fact that case
629     dependency changed within the pattern. This was once needed for "required
630     byte" processing, but is no longer used. This recovers a now-scarce options
631     bit. Also moved the least significant internal flag bit to the most-
632     significant bit of the word, which was not previously used (hangover from
633     the days when it was an int rather than a uint) to free up another bit for
634     the future.
635    
636     23. Added support for CRLF line endings as well as CR and LF. As well as the
637     default being selectable at build time, it can now be changed at runtime
638     via the PCRE_NEWLINE_xxx flags. There are now options for pcregrep to
639     specify that it is scanning data with non-default line endings.
640    
641     24. Changed the definition of CXXLINK to make it agree with the definition of
642     LINK in the Makefile, by replacing LDFLAGS to CXXFLAGS.
643    
644     25. Applied Ian Taylor's patches to avoid using another stack frame for tail
645     recursions. This makes a big different to stack usage for some patterns.
646    
647     26. If a subpattern containing a named recursion or subroutine reference such
648     as (?P>B) was quantified, for example (xxx(?P>B)){3}, the calculation of
649     the space required for the compiled pattern went wrong and gave too small a
650     value. Depending on the environment, this could lead to "Failed: internal
651     error: code overflow at offset 49" or "glibc detected double free or
652     corruption" errors.
653    
654     27. Applied patches from Google (a) to support the new newline modes and (b) to
655     advance over multibyte UTF-8 characters in GlobalReplace.
656    
657     28. Change free() to pcre_free() in pcredemo.c. Apparently this makes a
658     difference for some implementation of PCRE in some Windows version.
659    
660     29. Added some extra testing facilities to pcretest:
661    
662     \q<number> in a data line sets the "match limit" value
663     \Q<number> in a data line sets the "match recursion limt" value
664     -S <number> sets the stack size, where <number> is in megabytes
665    
666     The -S option isn't available for Windows.
667    
668    
669 nigel 89 Version 6.6 06-Feb-06
670     ---------------------
671    
672     1. Change 16(a) for 6.5 broke things, because PCRE_DATA_SCOPE was not defined
673     in pcreposix.h. I have copied the definition from pcre.h.
674    
675     2. Change 25 for 6.5 broke compilation in a build directory out-of-tree
676     because pcre.h is no longer a built file.
677    
678     3. Added Jeff Friedl's additional debugging patches to pcregrep. These are
679     not normally included in the compiled code.
680    
681    
682 nigel 87 Version 6.5 01-Feb-06
683     ---------------------
684    
685     1. When using the partial match feature with pcre_dfa_exec(), it was not
686     anchoring the second and subsequent partial matches at the new starting
687     point. This could lead to incorrect results. For example, with the pattern
688     /1234/, partially matching against "123" and then "a4" gave a match.
689    
690     2. Changes to pcregrep:
691    
692     (a) All non-match returns from pcre_exec() were being treated as failures
693     to match the line. Now, unless the error is PCRE_ERROR_NOMATCH, an
694     error message is output. Some extra information is given for the
695     PCRE_ERROR_MATCHLIMIT and PCRE_ERROR_RECURSIONLIMIT errors, which are
696     probably the only errors that are likely to be caused by users (by
697     specifying a regex that has nested indefinite repeats, for instance).
698     If there are more than 20 of these errors, pcregrep is abandoned.
699    
700     (b) A binary zero was treated as data while matching, but terminated the
701     output line if it was written out. This has been fixed: binary zeroes
702     are now no different to any other data bytes.
703    
704     (c) Whichever of the LC_ALL or LC_CTYPE environment variables is set is
705     used to set a locale for matching. The --locale=xxxx long option has
706     been added (no short equivalent) to specify a locale explicitly on the
707     pcregrep command, overriding the environment variables.
708    
709     (d) When -B was used with -n, some line numbers in the output were one less
710     than they should have been.
711    
712     (e) Added the -o (--only-matching) option.
713    
714     (f) If -A or -C was used with -c (count only), some lines of context were
715     accidentally printed for the final match.
716    
717     (g) Added the -H (--with-filename) option.
718    
719     (h) The combination of options -rh failed to suppress file names for files
720     that were found from directory arguments.
721    
722     (i) Added the -D (--devices) and -d (--directories) options.
723    
724     (j) Added the -F (--fixed-strings) option.
725    
726     (k) Allow "-" to be used as a file name for -f as well as for a data file.
727    
728     (l) Added the --colo(u)r option.
729    
730     (m) Added Jeffrey Friedl's -S testing option, but within #ifdefs so that it
731     is not present by default.
732    
733     3. A nasty bug was discovered in the handling of recursive patterns, that is,
734     items such as (?R) or (?1), when the recursion could match a number of
735     alternatives. If it matched one of the alternatives, but subsequently,
736     outside the recursion, there was a failure, the code tried to back up into
737     the recursion. However, because of the way PCRE is implemented, this is not
738     possible, and the result was an incorrect result from the match.
739    
740     In order to prevent this happening, the specification of recursion has
741     been changed so that all such subpatterns are automatically treated as
742     atomic groups. Thus, for example, (?R) is treated as if it were (?>(?R)).
743    
744     4. I had overlooked the fact that, in some locales, there are characters for
745     which isalpha() is true but neither isupper() nor islower() are true. In
746     the fr_FR locale, for instance, the \xAA and \xBA characters (ordmasculine
747     and ordfeminine) are like this. This affected the treatment of \w and \W
748     when they appeared in character classes, but not when they appeared outside
749     a character class. The bit map for "word" characters is now created
750     separately from the results of isalnum() instead of just taking it from the
751     upper, lower, and digit maps. (Plus the underscore character, of course.)
752    
753     5. The above bug also affected the handling of POSIX character classes such as
754     [[:alpha:]] and [[:alnum:]]. These do not have their own bit maps in PCRE's
755     permanent tables. Instead, the bit maps for such a class were previously
756     created as the appropriate unions of the upper, lower, and digit bitmaps.
757     Now they are created by subtraction from the [[:word:]] class, which has
758     its own bitmap.
759    
760     6. The [[:blank:]] character class matches horizontal, but not vertical space.
761     It is created by subtracting the vertical space characters (\x09, \x0a,
762     \x0b, \x0c) from the [[:space:]] bitmap. Previously, however, the
763     subtraction was done in the overall bitmap for a character class, meaning
764     that a class such as [\x0c[:blank:]] was incorrect because \x0c would not
765     be recognized. This bug has been fixed.
766    
767     7. Patches from the folks at Google:
768    
769     (a) pcrecpp.cc: "to handle a corner case that may or may not happen in
770     real life, but is still worth protecting against".
771    
772     (b) pcrecpp.cc: "corrects a bug when negative radixes are used with
773     regular expressions".
774    
775     (c) pcre_scanner.cc: avoid use of std::count() because not all systems
776     have it.
777    
778     (d) Split off pcrecpparg.h from pcrecpp.h and had the former built by
779     "configure" and the latter not, in order to fix a problem somebody had
780     with compiling the Arg class on HP-UX.
781    
782     (e) Improve the error-handling of the C++ wrapper a little bit.
783    
784     (f) New tests for checking recursion limiting.
785    
786     8. The pcre_memmove() function, which is used only if the environment does not
787     have a standard memmove() function (and is therefore rarely compiled),
788     contained two bugs: (a) use of int instead of size_t, and (b) it was not
789     returning a result (though PCRE never actually uses the result).
790    
791     9. In the POSIX regexec() interface, if nmatch is specified as a ridiculously
792     large number - greater than INT_MAX/(3*sizeof(int)) - REG_ESPACE is
793     returned instead of calling malloc() with an overflowing number that would
794     most likely cause subsequent chaos.
795    
796     10. The debugging option of pcretest was not showing the NO_AUTO_CAPTURE flag.
797    
798     11. The POSIX flag REG_NOSUB is now supported. When a pattern that was compiled
799     with this option is matched, the nmatch and pmatch options of regexec() are
800     ignored.
801    
802     12. Added REG_UTF8 to the POSIX interface. This is not defined by POSIX, but is
803     provided in case anyone wants to the the POSIX interface with UTF-8
804     strings.
805    
806     13. Added CXXLDFLAGS to the Makefile parameters to provide settings only on the
807     C++ linking (needed for some HP-UX environments).
808    
809     14. Avoid compiler warnings in get_ucpname() when compiled without UCP support
810     (unused parameter) and in the pcre_printint() function (omitted "default"
811     switch label when the default is to do nothing).
812    
813     15. Added some code to make it possible, when PCRE is compiled as a C++
814     library, to replace subject pointers for pcre_exec() with a smart pointer
815     class, thus making it possible to process discontinuous strings.
816    
817     16. The two macros PCRE_EXPORT and PCRE_DATA_SCOPE are confusing, and perform
818     much the same function. They were added by different people who were trying
819     to make PCRE easy to compile on non-Unix systems. It has been suggested
820     that PCRE_EXPORT be abolished now that there is more automatic apparatus
821     for compiling on Windows systems. I have therefore replaced it with
822     PCRE_DATA_SCOPE. This is set automatically for Windows; if not set it
823     defaults to "extern" for C or "extern C" for C++, which works fine on
824     Unix-like systems. It is now possible to override the value of PCRE_DATA_
825     SCOPE with something explicit in config.h. In addition:
826    
827     (a) pcreposix.h still had just "extern" instead of either of these macros;
828     I have replaced it with PCRE_DATA_SCOPE.
829    
830     (b) Functions such as _pcre_xclass(), which are internal to the library,
831     but external in the C sense, all had PCRE_EXPORT in their definitions.
832     This is apparently wrong for the Windows case, so I have removed it.
833     (It makes no difference on Unix-like systems.)
834    
835     17. Added a new limit, MATCH_LIMIT_RECURSION, which limits the depth of nesting
836     of recursive calls to match(). This is different to MATCH_LIMIT because
837     that limits the total number of calls to match(), not all of which increase
838     the depth of recursion. Limiting the recursion depth limits the amount of
839     stack (or heap if NO_RECURSE is set) that is used. The default can be set
840     when PCRE is compiled, and changed at run time. A patch from Google adds
841     this functionality to the C++ interface.
842    
843     18. Changes to the handling of Unicode character properties:
844    
845     (a) Updated the table to Unicode 4.1.0.
846    
847     (b) Recognize characters that are not in the table as "Cn" (undefined).
848    
849     (c) I revised the way the table is implemented to a much improved format
850     which includes recognition of ranges. It now supports the ranges that
851     are defined in UnicodeData.txt, and it also amalgamates other
852     characters into ranges. This has reduced the number of entries in the
853     table from around 16,000 to around 3,000, thus reducing its size
854     considerably. I realized I did not need to use a tree structure after
855     all - a binary chop search is just as efficient. Having reduced the
856     number of entries, I extended their size from 6 bytes to 8 bytes to
857     allow for more data.
858    
859     (d) Added support for Unicode script names via properties such as \p{Han}.
860    
861     19. In UTF-8 mode, a backslash followed by a non-Ascii character was not
862     matching that character.
863    
864     20. When matching a repeated Unicode property with a minimum greater than zero,
865     (for example \pL{2,}), PCRE could look past the end of the subject if it
866     reached it while seeking the minimum number of characters. This could
867     happen only if some of the characters were more than one byte long, because
868     there is a check for at least the minimum number of bytes.
869    
870     21. Refactored the implementation of \p and \P so as to be more general, to
871     allow for more different types of property in future. This has changed the
872     compiled form incompatibly. Anybody with saved compiled patterns that use
873     \p or \P will have to recompile them.
874    
875     22. Added "Any" and "L&" to the supported property types.
876    
877     23. Recognize \x{...} as a code point specifier, even when not in UTF-8 mode,
878     but give a compile time error if the value is greater than 0xff.
879    
880     24. The man pages for pcrepartial, pcreprecompile, and pcre_compile2 were
881     accidentally not being installed or uninstalled.
882    
883     25. The pcre.h file was built from pcre.h.in, but the only changes that were
884     made were to insert the current release number. This seemed silly, because
885     it made things harder for people building PCRE on systems that don't run
886     "configure". I have turned pcre.h into a distributed file, no longer built
887     by "configure", with the version identification directly included. There is
888     no longer a pcre.h.in file.
889    
890     However, this change necessitated a change to the pcre-config script as
891     well. It is built from pcre-config.in, and one of the substitutions was the
892     release number. I have updated configure.ac so that ./configure now finds
893     the release number by grepping pcre.h.
894    
895     26. Added the ability to run the tests under valgrind.
896    
897    
898 nigel 85 Version 6.4 05-Sep-05
899     ---------------------
900    
901     1. Change 6.0/10/(l) to pcregrep introduced a bug that caused separator lines
902     "--" to be printed when multiple files were scanned, even when none of the
903     -A, -B, or -C options were used. This is not compatible with Gnu grep, so I
904     consider it to be a bug, and have restored the previous behaviour.
905    
906     2. A couple of code tidies to get rid of compiler warnings.
907    
908     3. The pcretest program used to cheat by referring to symbols in the library
909     whose names begin with _pcre_. These are internal symbols that are not
910     really supposed to be visible externally, and in some environments it is
911     possible to suppress them. The cheating is now confined to including
912     certain files from the library's source, which is a bit cleaner.
913    
914     4. Renamed pcre.in as pcre.h.in to go with pcrecpp.h.in; it also makes the
915     file's purpose clearer.
916    
917     5. Reorganized pcre_ucp_findchar().
918    
919    
920 nigel 83 Version 6.3 15-Aug-05
921     ---------------------
922    
923     1. The file libpcre.pc.in did not have general read permission in the tarball.
924    
925     2. There were some problems when building without C++ support:
926    
927     (a) If C++ support was not built, "make install" and "make test" still
928     tried to test it.
929    
930     (b) There were problems when the value of CXX was explicitly set. Some
931     changes have been made to try to fix these, and ...
932    
933     (c) --disable-cpp can now be used to explicitly disable C++ support.
934    
935     (d) The use of @CPP_OBJ@ directly caused a blank line preceded by a
936     backslash in a target when C++ was disabled. This confuses some
937     versions of "make", apparently. Using an intermediate variable solves
938     this. (Same for CPP_LOBJ.)
939    
940     3. $(LINK_FOR_BUILD) now includes $(CFLAGS_FOR_BUILD) and $(LINK)
941     (non-Windows) now includes $(CFLAGS) because these flags are sometimes
942     necessary on certain architectures.
943    
944     4. Added a setting of -export-symbols-regex to the link command to remove
945     those symbols that are exported in the C sense, but actually are local
946     within the library, and not documented. Their names all begin with
947     "_pcre_". This is not a perfect job, because (a) we have to except some
948     symbols that pcretest ("illegally") uses, and (b) the facility isn't always
949     available (and never for static libraries). I have made a note to try to
950     find a way round (a) in the future.
951    
952    
953 nigel 81 Version 6.2 01-Aug-05
954     ---------------------
955    
956     1. There was no test for integer overflow of quantifier values. A construction
957     such as {1111111111111111} would give undefined results. What is worse, if
958     a minimum quantifier for a parenthesized subpattern overflowed and became
959     negative, the calculation of the memory size went wrong. This could have
960     led to memory overwriting.
961    
962     2. Building PCRE using VPATH was broken. Hopefully it is now fixed.
963    
964     3. Added "b" to the 2nd argument of fopen() in dftables.c, for non-Unix-like
965     operating environments where this matters.
966    
967     4. Applied Giuseppe Maxia's patch to add additional features for controlling
968     PCRE options from within the C++ wrapper.
969    
970     5. Named capturing subpatterns were not being correctly counted when a pattern
971     was compiled. This caused two problems: (a) If there were more than 100
972     such subpatterns, the calculation of the memory needed for the whole
973     compiled pattern went wrong, leading to an overflow error. (b) Numerical
974     back references of the form \12, where the number was greater than 9, were
975     not recognized as back references, even though there were sufficient
976     previous subpatterns.
977    
978     6. Two minor patches to pcrecpp.cc in order to allow it to compile on older
979     versions of gcc, e.g. 2.95.4.
980    
981    
982 nigel 79 Version 6.1 21-Jun-05
983     ---------------------
984    
985     1. There was one reference to the variable "posix" in pcretest.c that was not
986     surrounded by "#if !defined NOPOSIX".
987    
988     2. Make it possible to compile pcretest without DFA support, UTF8 support, or
989     the cross-check on the old pcre_info() function, for the benefit of the
990     cut-down version of PCRE that is currently imported into Exim.
991    
992     3. A (silly) pattern starting with (?i)(?-i) caused an internal space
993     allocation error. I've done the easy fix, which wastes 2 bytes for sensible
994     patterns that start (?i) but I don't think that matters. The use of (?i) is
995     just an example; this all applies to the other options as well.
996    
997     4. Since libtool seems to echo the compile commands it is issuing, the output
998     from "make" can be reduced a bit by putting "@" in front of each libtool
999     compile command.
1000    
1001     5. Patch from the folks at Google for configure.in to be a bit more thorough
1002     in checking for a suitable C++ installation before trying to compile the
1003     C++ stuff. This should fix a reported problem when a compiler was present,
1004     but no suitable headers.
1005    
1006     6. The man pages all had just "PCRE" as their title. I have changed them to
1007     be the relevant file name. I have also arranged that these names are
1008     retained in the file doc/pcre.txt, which is a concatenation in text format
1009     of all the man pages except the little individual ones for each function.
1010    
1011     7. The NON-UNIX-USE file had not been updated for the different set of source
1012     files that come with release 6. I also added a few comments about the C++
1013     wrapper.
1014    
1015    
1016 nigel 77 Version 6.0 07-Jun-05
1017     ---------------------
1018    
1019     1. Some minor internal re-organization to help with my DFA experiments.
1020    
1021     2. Some missing #ifdef SUPPORT_UCP conditionals in pcretest and printint that
1022     didn't matter for the library itself when fully configured, but did matter
1023     when compiling without UCP support, or within Exim, where the ucp files are
1024     not imported.
1025    
1026     3. Refactoring of the library code to split up the various functions into
1027     different source modules. The addition of the new DFA matching code (see
1028     below) to a single monolithic source would have made it really too
1029     unwieldy, quite apart from causing all the code to be include in a
1030     statically linked application, when only some functions are used. This is
1031     relevant even without the DFA addition now that patterns can be compiled in
1032     one application and matched in another.
1033    
1034     The downside of splitting up is that there have to be some external
1035     functions and data tables that are used internally in different modules of
1036     the library but which are not part of the API. These have all had their
1037     names changed to start with "_pcre_" so that they are unlikely to clash
1038     with other external names.
1039    
1040     4. Added an alternate matching function, pcre_dfa_exec(), which matches using
1041     a different (DFA) algorithm. Although it is slower than the original
1042     function, it does have some advantages for certain types of matching
1043     problem.
1044    
1045     5. Upgrades to pcretest in order to test the features of pcre_dfa_exec(),
1046     including restarting after a partial match.
1047    
1048     6. A patch for pcregrep that defines INVALID_FILE_ATTRIBUTES if it is not
1049     defined when compiling for Windows was sent to me. I have put it into the
1050     code, though I have no means of testing or verifying it.
1051    
1052     7. Added the pcre_refcount() auxiliary function.
1053    
1054     8. Added the PCRE_FIRSTLINE option. This constrains an unanchored pattern to
1055     match before or at the first newline in the subject string. In pcretest,
1056     the /f option on a pattern can be used to set this.
1057    
1058     9. A repeated \w when used in UTF-8 mode with characters greater than 256
1059     would behave wrongly. This has been present in PCRE since release 4.0.
1060    
1061     10. A number of changes to the pcregrep command:
1062    
1063     (a) Refactored how -x works; insert ^(...)$ instead of setting
1064     PCRE_ANCHORED and checking the length, in preparation for adding
1065     something similar for -w.
1066    
1067     (b) Added the -w (match as a word) option.
1068    
1069     (c) Refactored the way lines are read and buffered so as to have more
1070     than one at a time available.
1071    
1072     (d) Implemented a pcregrep test script.
1073    
1074     (e) Added the -M (multiline match) option. This allows patterns to match
1075     over several lines of the subject. The buffering ensures that at least
1076     8K, or the rest of the document (whichever is the shorter) is available
1077     for matching (and similarly the previous 8K for lookbehind assertions).
1078    
1079     (f) Changed the --help output so that it now says
1080    
1081     -w, --word-regex(p)
1082    
1083     instead of two lines, one with "regex" and the other with "regexp"
1084     because that confused at least one person since the short forms are the
1085     same. (This required a bit of code, as the output is generated
1086     automatically from a table. It wasn't just a text change.)
1087    
1088     (g) -- can be used to terminate pcregrep options if the next thing isn't an
1089     option but starts with a hyphen. Could be a pattern or a path name
1090     starting with a hyphen, for instance.
1091    
1092     (h) "-" can be given as a file name to represent stdin.
1093    
1094     (i) When file names are being printed, "(standard input)" is used for
1095     the standard input, for compatibility with GNU grep. Previously
1096     "<stdin>" was used.
1097    
1098     (j) The option --label=xxx can be used to supply a name to be used for
1099     stdin when file names are being printed. There is no short form.
1100    
1101     (k) Re-factored the options decoding logic because we are going to add
1102     two more options that take data. Such options can now be given in four
1103     different ways, e.g. "-fname", "-f name", "--file=name", "--file name".
1104    
1105     (l) Added the -A, -B, and -C options for requesting that lines of context
1106     around matches be printed.
1107    
1108     (m) Added the -L option to print the names of files that do not contain
1109     any matching lines, that is, the complement of -l.
1110    
1111     (n) The return code is 2 if any file cannot be opened, but pcregrep does
1112     continue to scan other files.
1113    
1114     (o) The -s option was incorrectly implemented. For compatibility with other
1115     greps, it now suppresses the error message for a non-existent or non-
1116     accessible file (but not the return code). There is a new option called
1117     -q that suppresses the output of matching lines, which was what -s was
1118     previously doing.
1119    
1120     (p) Added --include and --exclude options to specify files for inclusion
1121     and exclusion when recursing.
1122    
1123     11. The Makefile was not using the Autoconf-supported LDFLAGS macro properly.
1124     Hopefully, it now does.
1125    
1126     12. Missing cast in pcre_study().
1127    
1128     13. Added an "uninstall" target to the makefile.
1129    
1130     14. Replaced "extern" in the function prototypes in Makefile.in with
1131     "PCRE_DATA_SCOPE", which defaults to 'extern' or 'extern "C"' in the Unix
1132     world, but is set differently for Windows.
1133    
1134     15. Added a second compiling function called pcre_compile2(). The only
1135     difference is that it has an extra argument, which is a pointer to an
1136     integer error code. When there is a compile-time failure, this is set
1137     non-zero, in addition to the error test pointer being set to point to an
1138     error message. The new argument may be NULL if no error number is required
1139     (but then you may as well call pcre_compile(), which is now just a
1140     wrapper). This facility is provided because some applications need a
1141     numeric error indication, but it has also enabled me to tidy up the way
1142     compile-time errors are handled in the POSIX wrapper.
1143    
1144     16. Added VPATH=.libs to the makefile; this should help when building with one
1145     prefix path and installing with another. (Or so I'm told by someone who
1146     knows more about this stuff than I do.)
1147    
1148     17. Added a new option, REG_DOTALL, to the POSIX function regcomp(). This
1149     passes PCRE_DOTALL to the pcre_compile() function, making the "." character
1150     match everything, including newlines. This is not POSIX-compatible, but
1151     somebody wanted the feature. From pcretest it can be activated by using
1152     both the P and the s flags.
1153    
1154     18. AC_PROG_LIBTOOL appeared twice in Makefile.in. Removed one.
1155    
1156     19. libpcre.pc was being incorrectly installed as executable.
1157    
1158     20. A couple of places in pcretest check for end-of-line by looking for '\n';
1159     it now also looks for '\r' so that it will work unmodified on Windows.
1160    
1161     21. Added Google's contributed C++ wrapper to the distribution.
1162    
1163     22. Added some untidy missing memory free() calls in pcretest, to keep
1164     Electric Fence happy when testing.
1165    
1166    
1167    
1168 nigel 75 Version 5.0 13-Sep-04
1169     ---------------------
1170    
1171     1. Internal change: literal characters are no longer packed up into items
1172     containing multiple characters in a single byte-string. Each character
1173     is now matched using a separate opcode. However, there may be more than one
1174     byte in the character in UTF-8 mode.
1175    
1176     2. The pcre_callout_block structure has two new fields: pattern_position and
1177     next_item_length. These contain the offset in the pattern to the next match
1178     item, and its length, respectively.
1179    
1180     3. The PCRE_AUTO_CALLOUT option for pcre_compile() requests the automatic
1181     insertion of callouts before each pattern item. Added the /C option to
1182     pcretest to make use of this.
1183    
1184     4. On the advice of a Windows user, the lines
1185    
1186     #if defined(_WIN32) || defined(WIN32)
1187     _setmode( _fileno( stdout ), 0x8000 );
1188     #endif /* defined(_WIN32) || defined(WIN32) */
1189    
1190     have been added to the source of pcretest. This apparently does useful
1191     magic in relation to line terminators.
1192    
1193     5. Changed "r" and "w" in the calls to fopen() in pcretest to "rb" and "wb"
1194     for the benefit of those environments where the "b" makes a difference.
1195    
1196     6. The icc compiler has the same options as gcc, but "configure" doesn't seem
1197     to know about it. I have put a hack into configure.in that adds in code
1198     to set GCC=yes if CC=icc. This seems to end up at a point in the
1199     generated configure script that is early enough to affect the setting of
1200     compiler options, which is what is needed, but I have no means of testing
1201     whether it really works. (The user who reported this had patched the
1202     generated configure script, which of course I cannot do.)
1203    
1204     LATER: After change 22 below (new libtool files), the configure script
1205     seems to know about icc (and also ecc). Therefore, I have commented out
1206     this hack in configure.in.
1207    
1208     7. Added support for pkg-config (2 patches were sent in).
1209    
1210     8. Negated POSIX character classes that used a combination of internal tables
1211     were completely broken. These were [[:^alpha:]], [[:^alnum:]], and
1212     [[:^ascii]]. Typically, they would match almost any characters. The other
1213     POSIX classes were not broken in this way.
1214    
1215     9. Matching the pattern "\b.*?" against "ab cd", starting at offset 1, failed
1216     to find the match, as PCRE was deluded into thinking that the match had to
1217     start at the start point or following a newline. The same bug applied to
1218     patterns with negative forward assertions or any backward assertions
1219     preceding ".*" at the start, unless the pattern required a fixed first
1220     character. This was a failing pattern: "(?!.bcd).*". The bug is now fixed.
1221    
1222     10. In UTF-8 mode, when moving forwards in the subject after a failed match
1223     starting at the last subject character, bytes beyond the end of the subject
1224     string were read.
1225    
1226     11. Renamed the variable "class" as "classbits" to make life easier for C++
1227     users. (Previously there was a macro definition, but it apparently wasn't
1228     enough.)
1229    
1230     12. Added the new field "tables" to the extra data so that tables can be passed
1231     in at exec time, or the internal tables can be re-selected. This allows
1232     a compiled regex to be saved and re-used at a later time by a different
1233     program that might have everything at different addresses.
1234    
1235     13. Modified the pcre-config script so that, when run on Solaris, it shows a
1236     -R library as well as a -L library.
1237    
1238     14. The debugging options of pcretest (-d on the command line or D on a
1239     pattern) showed incorrect output for anything following an extended class
1240     that contained multibyte characters and which was followed by a quantifier.
1241    
1242     15. Added optional support for general category Unicode character properties
1243     via the \p, \P, and \X escapes. Unicode property support implies UTF-8
1244     support. It adds about 90K to the size of the library. The meanings of the
1245     inbuilt class escapes such as \d and \s have NOT been changed.
1246    
1247     16. Updated pcredemo.c to include calls to free() to release the memory for the
1248     compiled pattern.
1249    
1250     17. The generated file chartables.c was being created in the source directory
1251     instead of in the building directory. This caused the build to fail if the
1252     source directory was different from the building directory, and was
1253     read-only.
1254    
1255     18. Added some sample Win commands from Mark Tetrode into the NON-UNIX-USE
1256     file. No doubt somebody will tell me if they don't make sense... Also added
1257     Dan Mooney's comments about building on OpenVMS.
1258    
1259     19. Added support for partial matching via the PCRE_PARTIAL option for
1260     pcre_exec() and the \P data escape in pcretest.
1261    
1262     20. Extended pcretest with 3 new pattern features:
1263    
1264     (i) A pattern option of the form ">rest-of-line" causes pcretest to
1265     write the compiled pattern to the file whose name is "rest-of-line".
1266     This is a straight binary dump of the data, with the saved pointer to
1267     the character tables forced to be NULL. The study data, if any, is
1268     written too. After writing, pcretest reads a new pattern.
1269    
1270     (ii) If, instead of a pattern, "<rest-of-line" is given, pcretest reads a
1271     compiled pattern from the given file. There must not be any
1272     occurrences of "<" in the file name (pretty unlikely); if there are,
1273     pcretest will instead treat the initial "<" as a pattern delimiter.
1274     After reading in the pattern, pcretest goes on to read data lines as
1275     usual.
1276    
1277     (iii) The F pattern option causes pcretest to flip the bytes in the 32-bit
1278     and 16-bit fields in a compiled pattern, to simulate a pattern that
1279     was compiled on a host of opposite endianness.
1280    
1281     21. The pcre-exec() function can now cope with patterns that were compiled on
1282     hosts of opposite endianness, with this restriction:
1283    
1284     As for any compiled expression that is saved and used later, the tables
1285     pointer field cannot be preserved; the extra_data field in the arguments
1286     to pcre_exec() should be used to pass in a tables address if a value
1287     other than the default internal tables were used at compile time.
1288    
1289     22. Calling pcre_exec() with a negative value of the "ovecsize" parameter is
1290     now diagnosed as an error. Previously, most of the time, a negative number
1291     would have been treated as zero, but if in addition "ovector" was passed as
1292     NULL, a crash could occur.
1293    
1294     23. Updated the files ltmain.sh, config.sub, config.guess, and aclocal.m4 with
1295     new versions from the libtool 1.5 distribution (the last one is a copy of
1296     a file called libtool.m4). This seems to have fixed the need to patch
1297     "configure" to support Darwin 1.3 (which I used to do). However, I still
1298     had to patch ltmain.sh to ensure that ${SED} is set (it isn't on my
1299     workstation).
1300    
1301     24. Changed the PCRE licence to be the more standard "BSD" licence.
1302    
1303    
1304 nigel 73 Version 4.5 01-Dec-03
1305     ---------------------
1306    
1307     1. There has been some re-arrangement of the code for the match() function so
1308     that it can be compiled in a version that does not call itself recursively.
1309     Instead, it keeps those local variables that need separate instances for
1310     each "recursion" in a frame on the heap, and gets/frees frames whenever it
1311     needs to "recurse". Keeping track of where control must go is done by means
1312     of setjmp/longjmp. The whole thing is implemented by a set of macros that
1313     hide most of the details from the main code, and operates only if
1314     NO_RECURSE is defined while compiling pcre.c. If PCRE is built using the
1315     "configure" mechanism, "--disable-stack-for-recursion" turns on this way of
1316     operating.
1317    
1318     To make it easier for callers to provide specially tailored get/free
1319     functions for this usage, two new functions, pcre_stack_malloc, and
1320     pcre_stack_free, are used. They are always called in strict stacking order,
1321     and the size of block requested is always the same.
1322    
1323     The PCRE_CONFIG_STACKRECURSE info parameter can be used to find out whether
1324     PCRE has been compiled to use the stack or the heap for recursion. The
1325     -C option of pcretest uses this to show which version is compiled.
1326    
1327     A new data escape \S, is added to pcretest; it causes the amounts of store
1328     obtained and freed by both kinds of malloc/free at match time to be added
1329     to the output.
1330    
1331     2. Changed the locale test to use "fr_FR" instead of "fr" because that's
1332     what's available on my current Linux desktop machine.
1333    
1334     3. When matching a UTF-8 string, the test for a valid string at the start has
1335     been extended. If start_offset is not zero, PCRE now checks that it points
1336     to a byte that is the start of a UTF-8 character. If not, it returns
1337     PCRE_ERROR_BADUTF8_OFFSET (-11). Note: the whole string is still checked;
1338     this is necessary because there may be backward assertions in the pattern.
1339     When matching the same subject several times, it may save resources to use
1340     PCRE_NO_UTF8_CHECK on all but the first call if the string is long.
1341    
1342     4. The code for checking the validity of UTF-8 strings has been tightened so
1343     that it rejects (a) strings containing 0xfe or 0xff bytes and (b) strings
1344     containing "overlong sequences".
1345    
1346     5. Fixed a bug (appearing twice) that I could not find any way of exploiting!
1347     I had written "if ((digitab[*p++] && chtab_digit) == 0)" where the "&&"
1348     should have been "&", but it just so happened that all the cases this let
1349     through by mistake were picked up later in the function.
1350    
1351     6. I had used a variable called "isblank" - this is a C99 function, causing
1352     some compilers to warn. To avoid this, I renamed it (as "blankclass").
1353    
1354     7. Cosmetic: (a) only output another newline at the end of pcretest if it is
1355     prompting; (b) run "./pcretest /dev/null" at the start of the test script
1356     so the version is shown; (c) stop "make test" echoing "./RunTest".
1357    
1358     8. Added patches from David Burgess to enable PCRE to run on EBCDIC systems.
1359    
1360     9. The prototype for memmove() for systems that don't have it was using
1361     size_t, but the inclusion of the header that defines size_t was later. I've
1362     moved the #includes for the C headers earlier to avoid this.
1363    
1364     10. Added some adjustments to the code to make it easier to compiler on certain
1365     special systems:
1366    
1367     (a) Some "const" qualifiers were missing.
1368     (b) Added the macro EXPORT before all exported functions; by default this
1369     is defined to be empty.
1370     (c) Changed the dftables auxiliary program (that builds chartables.c) so
1371     that it reads its output file name as an argument instead of writing
1372     to the standard output and assuming this can be redirected.
1373    
1374     11. In UTF-8 mode, if a recursive reference (e.g. (?1)) followed a character
1375     class containing characters with values greater than 255, PCRE compilation
1376     went into a loop.
1377    
1378     12. A recursive reference to a subpattern that was within another subpattern
1379     that had a minimum quantifier of zero caused PCRE to crash. For example,
1380     (x(y(?2))z)? provoked this bug with a subject that got as far as the
1381     recursion. If the recursively-called subpattern itself had a zero repeat,
1382     that was OK.
1383    
1384     13. In pcretest, the buffer for reading a data line was set at 30K, but the
1385     buffer into which it was copied (for escape processing) was still set at
1386     1024, so long lines caused crashes.
1387    
1388     14. A pattern such as /[ab]{1,3}+/ failed to compile, giving the error
1389     "internal error: code overflow...". This applied to any character class
1390     that was followed by a possessive quantifier.
1391    
1392     15. Modified the Makefile to add libpcre.la as a prerequisite for
1393     libpcreposix.la because I was told this is needed for a parallel build to
1394     work.
1395    
1396     16. If a pattern that contained .* following optional items at the start was
1397     studied, the wrong optimizing data was generated, leading to matching
1398     errors. For example, studying /[ab]*.*c/ concluded, erroneously, that any
1399     matching string must start with a or b or c. The correct conclusion for
1400     this pattern is that a match can start with any character.
1401    
1402    
1403 nigel 71 Version 4.4 13-Aug-03
1404     ---------------------
1405    
1406     1. In UTF-8 mode, a character class containing characters with values between
1407     127 and 255 was not handled correctly if the compiled pattern was studied.
1408     In fixing this, I have also improved the studying algorithm for such
1409     classes (slightly).
1410    
1411     2. Three internal functions had redundant arguments passed to them. Removal
1412     might give a very teeny performance improvement.
1413    
1414     3. Documentation bug: the value of the capture_top field in a callout is *one
1415     more than* the number of the hightest numbered captured substring.
1416    
1417     4. The Makefile linked pcretest and pcregrep with -lpcre, which could result
1418     in incorrectly linking with a previously installed version. They now link
1419     explicitly with libpcre.la.
1420    
1421     5. configure.in no longer needs to recognize Cygwin specially.
1422    
1423     6. A problem in pcre.in for Windows platforms is fixed.
1424    
1425     7. If a pattern was successfully studied, and the -d (or /D) flag was given to
1426     pcretest, it used to include the size of the study block as part of its
1427     output. Unfortunately, the structure contains a field that has a different
1428     size on different hardware architectures. This meant that the tests that
1429     showed this size failed. As the block is currently always of a fixed size,
1430     this information isn't actually particularly useful in pcretest output, so
1431     I have just removed it.
1432    
1433     8. Three pre-processor statements accidentally did not start in column 1.
1434     Sadly, there are *still* compilers around that complain, even though
1435     standard C has not required this for well over a decade. Sigh.
1436    
1437     9. In pcretest, the code for checking callouts passed small integers in the
1438     callout_data field, which is a void * field. However, some picky compilers
1439     complained about the casts involved for this on 64-bit systems. Now
1440     pcretest passes the address of the small integer instead, which should get
1441     rid of the warnings.
1442    
1443     10. By default, when in UTF-8 mode, PCRE now checks for valid UTF-8 strings at
1444     both compile and run time, and gives an error if an invalid UTF-8 sequence
1445     is found. There is a option for disabling this check in cases where the
1446     string is known to be correct and/or the maximum performance is wanted.
1447    
1448     11. In response to a bug report, I changed one line in Makefile.in from
1449    
1450     -Wl,--out-implib,.libs/lib@WIN_PREFIX@pcreposix.dll.a \
1451     to
1452     -Wl,--out-implib,.libs/@WIN_PREFIX@libpcreposix.dll.a \
1453    
1454     to look similar to other lines, but I have no way of telling whether this
1455     is the right thing to do, as I do not use Windows. No doubt I'll get told
1456     if it's wrong...
1457    
1458    
1459 nigel 69 Version 4.3 21-May-03
1460     ---------------------
1461    
1462     1. Two instances of @WIN_PREFIX@ omitted from the Windows targets in the
1463     Makefile.
1464    
1465     2. Some refactoring to improve the quality of the code:
1466    
1467     (i) The utf8_table... variables are now declared "const".
1468    
1469     (ii) The code for \cx, which used the "case flipping" table to upper case
1470     lower case letters, now just substracts 32. This is ASCII-specific,
1471     but the whole concept of \cx is ASCII-specific, so it seems
1472     reasonable.
1473    
1474     (iii) PCRE was using its character types table to recognize decimal and
1475     hexadecimal digits in the pattern. This is silly, because it handles
1476     only 0-9, a-f, and A-F, but the character types table is locale-
1477     specific, which means strange things might happen. A private
1478     table is now used for this - though it costs 256 bytes, a table is
1479     much faster than multiple explicit tests. Of course, the standard
1480     character types table is still used for matching digits in subject
1481     strings against \d.
1482    
1483     (iv) Strictly, the identifier ESC_t is reserved by POSIX (all identifiers
1484     ending in _t are). So I've renamed it as ESC_tee.
1485    
1486     3. The first argument for regexec() in the POSIX wrapper should have been
1487     defined as "const".
1488    
1489     4. Changed pcretest to use malloc() for its buffers so that they can be
1490     Electric Fenced for debugging.
1491    
1492     5. There were several places in the code where, in UTF-8 mode, PCRE would try
1493     to read one or more bytes before the start of the subject string. Often this
1494     had no effect on PCRE's behaviour, but in some circumstances it could
1495     provoke a segmentation fault.
1496    
1497     6. A lookbehind at the start of a pattern in UTF-8 mode could also cause PCRE
1498     to try to read one or more bytes before the start of the subject string.
1499    
1500     7. A lookbehind in a pattern matched in non-UTF-8 mode on a PCRE compiled with
1501     UTF-8 support could misbehave in various ways if the subject string
1502     contained bytes with the 0x80 bit set and the 0x40 bit unset in a lookbehind
1503     area. (PCRE was not checking for the UTF-8 mode flag, and trying to move
1504     back over UTF-8 characters.)
1505    
1506    
1507 nigel 67 Version 4.2 14-Apr-03
1508     ---------------------
1509    
1510     1. Typo "#if SUPPORT_UTF8" instead of "#ifdef SUPPORT_UTF8" fixed.
1511    
1512     2. Changes to the building process, supplied by Ronald Landheer-Cieslak
1513     [ON_WINDOWS]: new variable, "#" on non-Windows platforms
1514     [NOT_ON_WINDOWS]: new variable, "#" on Windows platforms
1515     [WIN_PREFIX]: new variable, "cyg" for Cygwin
1516     * Makefile.in: use autoconf substitution for OBJEXT, EXEEXT, BUILD_OBJEXT
1517     and BUILD_EXEEXT
1518     Note: automatic setting of the BUILD variables is not yet working
1519     set CPPFLAGS and BUILD_CPPFLAGS (but don't use yet) - should be used at
1520     compile-time but not at link-time
1521     [LINK]: use for linking executables only
1522     make different versions for Windows and non-Windows
1523     [LINKLIB]: new variable, copy of UNIX-style LINK, used for linking
1524     libraries
1525     [LINK_FOR_BUILD]: new variable
1526     [OBJEXT]: use throughout
1527     [EXEEXT]: use throughout
1528     <winshared>: new target
1529     <wininstall>: new target
1530     <dftables.o>: use native compiler
1531     <dftables>: use native linker
1532     <install>: handle Windows platform correctly
1533     <clean>: ditto
1534     <check>: ditto
1535     copy DLL to top builddir before testing
1536    
1537     As part of these changes, -no-undefined was removed again. This was reported
1538     to give trouble on HP-UX 11.0, so getting rid of it seems like a good idea
1539     in any case.
1540    
1541     3. Some tidies to get rid of compiler warnings:
1542    
1543     . In the match_data structure, match_limit was an unsigned long int, whereas
1544     match_call_count was an int. I've made them both unsigned long ints.
1545    
1546     . In pcretest the fact that a const uschar * doesn't automatically cast to
1547     a void * provoked a warning.
1548    
1549     . Turning on some more compiler warnings threw up some "shadow" variables
1550     and a few more missing casts.
1551    
1552     4. If PCRE was complied with UTF-8 support, but called without the PCRE_UTF8
1553     option, a class that contained a single character with a value between 128
1554     and 255 (e.g. /[\xFF]/) caused PCRE to crash.
1555    
1556     5. If PCRE was compiled with UTF-8 support, but called without the PCRE_UTF8
1557     option, a class that contained several characters, but with at least one
1558     whose value was between 128 and 255 caused PCRE to crash.
1559    
1560    
1561 nigel 65 Version 4.1 12-Mar-03
1562     ---------------------
1563 nigel 63
1564 nigel 65 1. Compiling with gcc -pedantic found a couple of places where casts were
1565     needed, and a string in dftables.c that was longer than standard compilers are
1566     required to support.
1567    
1568     2. Compiling with Sun's compiler found a few more places where the code could
1569     be tidied up in order to avoid warnings.
1570    
1571     3. The variables for cross-compiling were called HOST_CC and HOST_CFLAGS; the
1572     first of these names is deprecated in the latest Autoconf in favour of the name
1573     CC_FOR_BUILD, because "host" is typically used to mean the system on which the
1574     compiled code will be run. I can't find a reference for HOST_CFLAGS, but by
1575     analogy I have changed it to CFLAGS_FOR_BUILD.
1576    
1577     4. Added -no-undefined to the linking command in the Makefile, because this is
1578     apparently helpful for Windows. To make it work, also added "-L. -lpcre" to the
1579     linking step for the pcreposix library.
1580    
1581     5. PCRE was failing to diagnose the case of two named groups with the same
1582     name.
1583    
1584     6. A problem with one of PCRE's optimizations was discovered. PCRE remembers a
1585     literal character that is needed in the subject for a match, and scans along to
1586     ensure that it is present before embarking on the full matching process. This
1587     saves time in cases of nested unlimited repeats that are never going to match.
1588     Problem: the scan can take a lot of time if the subject is very long (e.g.
1589     megabytes), thus penalizing straightforward matches. It is now done only if the
1590     amount of subject to be scanned is less than 1000 bytes.
1591    
1592     7. A lesser problem with the same optimization is that it was recording the
1593     first character of an anchored pattern as "needed", thus provoking a search
1594     right along the subject, even when the first match of the pattern was going to
1595     fail. The "needed" character is now not set for anchored patterns, unless it
1596     follows something in the pattern that is of non-fixed length. Thus, it still
1597     fulfils its original purpose of finding quick non-matches in cases of nested
1598     unlimited repeats, but isn't used for simple anchored patterns such as /^abc/.
1599    
1600    
1601     Version 4.0 17-Feb-03
1602     ---------------------
1603    
1604 nigel 63 1. If a comment in an extended regex that started immediately after a meta-item
1605     extended to the end of string, PCRE compiled incorrect data. This could lead to
1606     all kinds of weird effects. Example: /#/ was bad; /()#/ was bad; /a#/ was not.
1607    
1608     2. Moved to autoconf 2.53 and libtool 1.4.2.
1609    
1610     3. Perl 5.8 no longer needs "use utf8" for doing UTF-8 things. Consequently,
1611     the special perltest8 script is no longer needed - all the tests can be run
1612     from a single perltest script.
1613    
1614     4. From 5.004, Perl has not included the VT character (0x0b) in the set defined
1615     by \s. It has now been removed in PCRE. This means it isn't recognized as
1616     whitespace in /x regexes too, which is the same as Perl. Note that the POSIX
1617     class [:space:] *does* include VT, thereby creating a mess.
1618    
1619     5. Added the class [:blank:] (a GNU extension from Perl 5.8) to match only
1620     space and tab.
1621    
1622     6. Perl 5.005 was a long time ago. It's time to amalgamate the tests that use
1623     its new features into the main test script, reducing the number of scripts.
1624    
1625     7. Perl 5.8 has changed the meaning of patterns like /a(?i)b/. Earlier versions
1626     were backward compatible, and made the (?i) apply to the whole pattern, as if
1627     /i were given. Now it behaves more logically, and applies the option setting
1628     only to what follows. PCRE has been changed to follow suit. However, if it
1629     finds options settings right at the start of the pattern, it extracts them into
1630     the global options, as before. Thus, they show up in the info data.
1631    
1632     8. Added support for the \Q...\E escape sequence. Characters in between are
1633     treated as literals. This is slightly different from Perl in that $ and @ are
1634     also handled as literals inside the quotes. In Perl, they will cause variable
1635     interpolation. Note the following examples:
1636    
1637     Pattern PCRE matches Perl matches
1638    
1639     \Qabc$xyz\E abc$xyz abc followed by the contents of $xyz
1640     \Qabc\$xyz\E abc\$xyz abc\$xyz
1641     \Qabc\E\$\Qxyz\E abc$xyz abc$xyz
1642    
1643     For compatibility with Perl, \Q...\E sequences are recognized inside character
1644     classes as well as outside them.
1645    
1646     9. Re-organized 3 code statements in pcretest to avoid "overflow in
1647     floating-point constant arithmetic" warnings from a Microsoft compiler. Added a
1648     (size_t) cast to one statement in pcretest and one in pcreposix to avoid
1649     signed/unsigned warnings.
1650    
1651     10. SunOS4 doesn't have strtoul(). This was used only for unpicking the -o
1652     option for pcretest, so I've replaced it by a simple function that does just
1653     that job.
1654    
1655     11. pcregrep was ending with code 0 instead of 2 for the commands "pcregrep" or
1656     "pcregrep -".
1657    
1658     12. Added "possessive quantifiers" ?+, *+, ++, and {,}+ which come from Sun's
1659     Java package. This provides some syntactic sugar for simple cases of what my
1660     documentation calls "once-only subpatterns". A pattern such as x*+ is the same
1661     as (?>x*). In other words, if what is inside (?>...) is just a single repeated
1662     item, you can use this simplified notation. Note that only makes sense with
1663     greedy quantifiers. Consequently, the use of the possessive quantifier forces
1664     greediness, whatever the setting of the PCRE_UNGREEDY option.
1665    
1666     13. A change of greediness default within a pattern was not taking effect at
1667     the current level for patterns like /(b+(?U)a+)/. It did apply to parenthesized
1668     subpatterns that followed. Patterns like /b+(?U)a+/ worked because the option
1669     was abstracted outside.
1670    
1671     14. PCRE now supports the \G assertion. It is true when the current matching
1672     position is at the start point of the match. This differs from \A when the
1673     starting offset is non-zero. Used with the /g option of pcretest (or similar
1674     code), it works in the same way as it does for Perl's /g option. If all
1675     alternatives of a regex begin with \G, the expression is anchored to the start
1676     match position, and the "anchored" flag is set in the compiled expression.
1677    
1678     15. Some bugs concerning the handling of certain option changes within patterns
1679     have been fixed. These applied to options other than (?ims). For example,
1680     "a(?x: b c )d" did not match "XabcdY" but did match "Xa b c dY". It should have
1681     been the other way round. Some of this was related to change 7 above.
1682    
1683     16. PCRE now gives errors for /[.x.]/ and /[=x=]/ as unsupported POSIX
1684     features, as Perl does. Previously, PCRE gave the warnings only for /[[.x.]]/
1685     and /[[=x=]]/. PCRE now also gives an error for /[:name:]/ because it supports
1686     POSIX classes only within a class (e.g. /[[:alpha:]]/).
1687    
1688     17. Added support for Perl's \C escape. This matches one byte, even in UTF8
1689     mode. Unlike ".", it always matches newline, whatever the setting of
1690     PCRE_DOTALL. However, PCRE does not permit \C to appear in lookbehind
1691     assertions. Perl allows it, but it doesn't (in general) work because it can't
1692     calculate the length of the lookbehind. At least, that's the case for Perl
1693     5.8.0 - I've been told they are going to document that it doesn't work in
1694     future.
1695    
1696     18. Added an error diagnosis for escapes that PCRE does not support: these are
1697     \L, \l, \N, \P, \p, \U, \u, and \X.
1698    
1699     19. Although correctly diagnosing a missing ']' in a character class, PCRE was
1700     reading past the end of the pattern in cases such as /[abcd/.
1701    
1702     20. PCRE was getting more memory than necessary for patterns with classes that
1703     contained both POSIX named classes and other characters, e.g. /[[:space:]abc/.
1704    
1705     21. Added some code, conditional on #ifdef VPCOMPAT, to make life easier for
1706     compiling PCRE for use with Virtual Pascal.
1707    
1708     22. Small fix to the Makefile to make it work properly if the build is done
1709     outside the source tree.
1710    
1711     23. Added a new extension: a condition to go with recursion. If a conditional
1712     subpattern starts with (?(R) the "true" branch is used if recursion has
1713     happened, whereas the "false" branch is used only at the top level.
1714    
1715     24. When there was a very long string of literal characters (over 255 bytes
1716     without UTF support, over 250 bytes with UTF support), the computation of how
1717     much memory was required could be incorrect, leading to segfaults or other
1718     strange effects.
1719    
1720     25. PCRE was incorrectly assuming anchoring (either to start of subject or to
1721     start of line for a non-DOTALL pattern) when a pattern started with (.*) and
1722     there was a subsequent back reference to those brackets. This meant that, for
1723     example, /(.*)\d+\1/ failed to match "abc123bc". Unfortunately, it isn't
1724     possible to check for precisely this case. All we can do is abandon the
1725     optimization if .* occurs inside capturing brackets when there are any back
1726     references whatsoever. (See below for a better fix that came later.)
1727    
1728     26. The handling of the optimization for finding the first character of a
1729     non-anchored pattern, and for finding a character that is required later in the
1730     match were failing in some cases. This didn't break the matching; it just
1731     failed to optimize when it could. The way this is done has been re-implemented.
1732    
1733     27. Fixed typo in error message for invalid (?R item (it said "(?p").
1734    
1735     28. Added a new feature that provides some of the functionality that Perl
1736     provides with (?{...}). The facility is termed a "callout". The way it is done
1737     in PCRE is for the caller to provide an optional function, by setting
1738     pcre_callout to its entry point. Like pcre_malloc and pcre_free, this is a
1739     global variable. By default it is unset, which disables all calling out. To get
1740     the function called, the regex must include (?C) at appropriate points. This
1741     is, in fact, equivalent to (?C0), and any number <= 255 may be given with (?C).
1742     This provides a means of identifying different callout points. When PCRE
1743     reaches such a point in the regex, if pcre_callout has been set, the external
1744     function is called. It is provided with data in a structure called
1745     pcre_callout_block, which is defined in pcre.h. If the function returns 0,
1746     matching continues; if it returns a non-zero value, the match at the current
1747     point fails. However, backtracking will occur if possible. [This was changed
1748     later and other features added - see item 49 below.]
1749    
1750     29. pcretest is upgraded to test the callout functionality. It provides a
1751     callout function that displays information. By default, it shows the start of
1752     the match and the current position in the text. There are some new data escapes
1753     to vary what happens:
1754    
1755     \C+ in addition, show current contents of captured substrings
1756     \C- do not supply a callout function
1757     \C!n return 1 when callout number n is reached
1758     \C!n!m return 1 when callout number n is reached for the mth time
1759    
1760     30. If pcregrep was called with the -l option and just a single file name, it
1761     output "<stdin>" if a match was found, instead of the file name.
1762    
1763     31. Improve the efficiency of the POSIX API to PCRE. If the number of capturing
1764     slots is less than POSIX_MALLOC_THRESHOLD, use a block on the stack to pass to
1765     pcre_exec(). This saves a malloc/free per call. The default value of
1766     POSIX_MALLOC_THRESHOLD is 10; it can be changed by --with-posix-malloc-threshold
1767     when configuring.
1768    
1769     32. The default maximum size of a compiled pattern is 64K. There have been a
1770     few cases of people hitting this limit. The code now uses macros to handle the
1771     storing of links as offsets within the compiled pattern. It defaults to 2-byte
1772     links, but this can be changed to 3 or 4 bytes by --with-link-size when
1773     configuring. Tests 2 and 5 work only with 2-byte links because they output
1774     debugging information about compiled patterns.
1775    
1776     33. Internal code re-arrangements:
1777    
1778     (a) Moved the debugging function for printing out a compiled regex into
1779     its own source file (printint.c) and used #include to pull it into
1780     pcretest.c and, when DEBUG is defined, into pcre.c, instead of having two
1781     separate copies.
1782    
1783     (b) Defined the list of op-code names for debugging as a macro in
1784     internal.h so that it is next to the definition of the opcodes.
1785    
1786     (c) Defined a table of op-code lengths for simpler skipping along compiled
1787     code. This is again a macro in internal.h so that it is next to the
1788     definition of the opcodes.
1789    
1790     34. Added support for recursive calls to individual subpatterns, along the
1791     lines of Robin Houston's patch (but implemented somewhat differently).
1792    
1793     35. Further mods to the Makefile to help Win32. Also, added code to pcregrep to
1794     allow it to read and process whole directories in Win32. This code was
1795     contributed by Lionel Fourquaux; it has not been tested by me.
1796    
1797     36. Added support for named subpatterns. The Python syntax (?P<name>...) is
1798     used to name a group. Names consist of alphanumerics and underscores, and must
1799     be unique. Back references use the syntax (?P=name) and recursive calls use
1800     (?P>name) which is a PCRE extension to the Python extension. Groups still have
1801     numbers. The function pcre_fullinfo() can be used after compilation to extract
1802     a name/number map. There are three relevant calls:
1803    
1804     PCRE_INFO_NAMEENTRYSIZE yields the size of each entry in the map
1805     PCRE_INFO_NAMECOUNT yields the number of entries
1806     PCRE_INFO_NAMETABLE yields a pointer to the map.
1807    
1808     The map is a vector of fixed-size entries. The size of each entry depends on
1809     the length of the longest name used. The first two bytes of each entry are the
1810     group number, most significant byte first. There follows the corresponding
1811     name, zero terminated. The names are in alphabetical order.
1812    
1813     37. Make the maximum literal string in the compiled code 250 for the non-UTF-8
1814     case instead of 255. Making it the same both with and without UTF-8 support
1815     means that the same test output works with both.
1816    
1817     38. There was a case of malloc(0) in the POSIX testing code in pcretest. Avoid
1818     calling malloc() with a zero argument.
1819    
1820     39. Change 25 above had to resort to a heavy-handed test for the .* anchoring
1821     optimization. I've improved things by keeping a bitmap of backreferences with
1822     numbers 1-31 so that if .* occurs inside capturing brackets that are not in
1823     fact referenced, the optimization can be applied. It is unlikely that a
1824     relevant occurrence of .* (i.e. one which might indicate anchoring or forcing
1825     the match to follow \n) will appear inside brackets with a number greater than
1826     31, but if it does, any back reference > 31 suppresses the optimization.
1827    
1828     40. Added a new compile-time option PCRE_NO_AUTO_CAPTURE. This has the effect
1829     of disabling numbered capturing parentheses. Any opening parenthesis that is
1830     not followed by ? behaves as if it were followed by ?: but named parentheses
1831     can still be used for capturing (and they will acquire numbers in the usual
1832     way).
1833    
1834     41. Redesigned the return codes from the match() function into yes/no/error so
1835     that errors can be passed back from deep inside the nested calls. A malloc
1836     failure while inside a recursive subpattern call now causes the
1837     PCRE_ERROR_NOMEMORY return instead of quietly going wrong.
1838    
1839     42. It is now possible to set a limit on the number of times the match()
1840     function is called in a call to pcre_exec(). This facility makes it possible to
1841     limit the amount of recursion and backtracking, though not in a directly
1842     obvious way, because the match() function is used in a number of different
1843     circumstances. The count starts from zero for each position in the subject
1844     string (for non-anchored patterns). The default limit is, for compatibility, a
1845     large number, namely 10 000 000. You can change this in two ways:
1846    
1847     (a) When configuring PCRE before making, you can use --with-match-limit=n
1848     to set a default value for the compiled library.
1849    
1850     (b) For each call to pcre_exec(), you can pass a pcre_extra block in which
1851     a different value is set. See 45 below.
1852    
1853     If the limit is exceeded, pcre_exec() returns PCRE_ERROR_MATCHLIMIT.
1854    
1855     43. Added a new function pcre_config(int, void *) to enable run-time extraction
1856     of things that can be changed at compile time. The first argument specifies
1857     what is wanted and the second points to where the information is to be placed.
1858     The current list of available information is:
1859    
1860     PCRE_CONFIG_UTF8
1861    
1862     The output is an integer that is set to one if UTF-8 support is available;
1863     otherwise it is set to zero.
1864    
1865     PCRE_CONFIG_NEWLINE
1866    
1867     The output is an integer that it set to the value of the code that is used for
1868     newline. It is either LF (10) or CR (13).
1869    
1870     PCRE_CONFIG_LINK_SIZE
1871    
1872     The output is an integer that contains the number of bytes used for internal
1873     linkage in compiled expressions. The value is 2, 3, or 4. See item 32 above.
1874    
1875     PCRE_CONFIG_POSIX_MALLOC_THRESHOLD
1876    
1877     The output is an integer that contains the threshold above which the POSIX
1878     interface uses malloc() for output vectors. See item 31 above.
1879    
1880     PCRE_CONFIG_MATCH_LIMIT
1881    
1882     The output is an unsigned integer that contains the default limit of the number
1883     of match() calls in a pcre_exec() execution. See 42 above.
1884    
1885     44. pcretest has been upgraded by the addition of the -C option. This causes it
1886     to extract all the available output from the new pcre_config() function, and to
1887     output it. The program then exits immediately.
1888    
1889     45. A need has arisen to pass over additional data with calls to pcre_exec() in
1890     order to support additional features. One way would have been to define
1891     pcre_exec2() (for example) with extra arguments, but this would not have been
1892     extensible, and would also have required all calls to the original function to
1893     be mapped to the new one. Instead, I have chosen to extend the mechanism that
1894     is used for passing in "extra" data from pcre_study().
1895    
1896     The pcre_extra structure is now exposed and defined in pcre.h. It currently
1897     contains the following fields:
1898    
1899     flags a bitmap indicating which of the following fields are set
1900     study_data opaque data from pcre_study()
1901     match_limit a way of specifying a limit on match() calls for a specific
1902     call to pcre_exec()
1903     callout_data data for callouts (see 49 below)
1904    
1905     The flag bits are also defined in pcre.h, and are
1906    
1907     PCRE_EXTRA_STUDY_DATA
1908     PCRE_EXTRA_MATCH_LIMIT
1909     PCRE_EXTRA_CALLOUT_DATA
1910    
1911     The pcre_study() function now returns one of these new pcre_extra blocks, with
1912     the actual study data pointed to by the study_data field, and the
1913     PCRE_EXTRA_STUDY_DATA flag set. This can be passed directly to pcre_exec() as
1914     before. That is, this change is entirely upwards-compatible and requires no
1915     change to existing code.
1916    
1917     If you want to pass in additional data to pcre_exec(), you can either place it
1918     in a pcre_extra block provided by pcre_study(), or create your own pcre_extra
1919     block.
1920    
1921     46. pcretest has been extended to test the PCRE_EXTRA_MATCH_LIMIT feature. If a
1922     data string contains the escape sequence \M, pcretest calls pcre_exec() several
1923     times with different match limits, until it finds the minimum value needed for
1924     pcre_exec() to complete. The value is then output. This can be instructive; for
1925     most simple matches the number is quite small, but for pathological cases it
1926     gets very large very quickly.
1927    
1928     47. There's a new option for pcre_fullinfo() called PCRE_INFO_STUDYSIZE. It
1929     returns the size of the data block pointed to by the study_data field in a
1930     pcre_extra block, that is, the value that was passed as the argument to
1931     pcre_malloc() when PCRE was getting memory in which to place the information
1932     created by pcre_study(). The fourth argument should point to a size_t variable.
1933     pcretest has been extended so that this information is shown after a successful
1934     pcre_study() call when information about the compiled regex is being displayed.
1935    
1936     48. Cosmetic change to Makefile: there's no need to have / after $(DESTDIR)
1937     because what follows is always an absolute path. (Later: it turns out that this
1938     is more than cosmetic for MinGW, because it doesn't like empty path
1939     components.)
1940    
1941     49. Some changes have been made to the callout feature (see 28 above):
1942    
1943     (i) A callout function now has three choices for what it returns:
1944    
1945     0 => success, carry on matching
1946     > 0 => failure at this point, but backtrack if possible
1947     < 0 => serious error, return this value from pcre_exec()
1948    
1949     Negative values should normally be chosen from the set of PCRE_ERROR_xxx
1950     values. In particular, returning PCRE_ERROR_NOMATCH forces a standard
1951     "match failed" error. The error number PCRE_ERROR_CALLOUT is reserved for
1952     use by callout functions. It will never be used by PCRE itself.
1953    
1954     (ii) The pcre_extra structure (see 45 above) has a void * field called
1955     callout_data, with corresponding flag bit PCRE_EXTRA_CALLOUT_DATA. The
1956     pcre_callout_block structure has a field of the same name. The contents of
1957     the field passed in the pcre_extra structure are passed to the callout
1958     function in the corresponding field in the callout block. This makes it
1959     easier to use the same callout-containing regex from multiple threads. For
1960     testing, the pcretest program has a new data escape
1961    
1962     \C*n pass the number n (may be negative) as callout_data
1963    
1964     If the callout function in pcretest receives a non-zero value as
1965     callout_data, it returns that value.
1966    
1967     50. Makefile wasn't handling CFLAGS properly when compiling dftables. Also,
1968     there were some redundant $(CFLAGS) in commands that are now specified as
1969     $(LINK), which already includes $(CFLAGS).
1970    
1971     51. Extensions to UTF-8 support are listed below. These all apply when (a) PCRE
1972     has been compiled with UTF-8 support *and* pcre_compile() has been compiled
1973     with the PCRE_UTF8 flag. Patterns that are compiled without that flag assume
1974     one-byte characters throughout. Note that case-insensitive matching applies
1975     only to characters whose values are less than 256. PCRE doesn't support the
1976     notion of cases for higher-valued characters.
1977    
1978     (i) A character class whose characters are all within 0-255 is handled as
1979     a bit map, and the map is inverted for negative classes. Previously, a
1980     character > 255 always failed to match such a class; however it should
1981     match if the class was a negative one (e.g. [^ab]). This has been fixed.
1982    
1983     (ii) A negated character class with a single character < 255 is coded as
1984     "not this character" (OP_NOT). This wasn't working properly when the test
1985     character was multibyte, either singly or repeated.
1986    
1987     (iii) Repeats of multibyte characters are now handled correctly in UTF-8
1988     mode, for example: \x{100}{2,3}.
1989    
1990     (iv) The character escapes \b, \B, \d, \D, \s, \S, \w, and \W (either
1991     singly or repeated) now correctly test multibyte characters. However,
1992     PCRE doesn't recognize any characters with values greater than 255 as
1993     digits, spaces, or word characters. Such characters always match \D, \S,
1994     and \W, and never match \d, \s, or \w.
1995    
1996     (v) Classes may now contain characters and character ranges with values
1997     greater than 255. For example: [ab\x{100}-\x{400}].
1998    
1999     (vi) pcregrep now has a --utf-8 option (synonym -u) which makes it call
2000     PCRE in UTF-8 mode.
2001    
2002     52. The info request value PCRE_INFO_FIRSTCHAR has been renamed
2003     PCRE_INFO_FIRSTBYTE because it is a byte value. However, the old name is
2004     retained for backwards compatibility. (Note that LASTLITERAL is also a byte
2005     value.)
2006    
2007     53. The single man page has become too large. I have therefore split it up into
2008     a number of separate man pages. These also give rise to individual HTML pages;
2009     these are now put in a separate directory, and there is an index.html page that
2010     lists them all. Some hyperlinking between the pages has been installed.
2011    
2012     54. Added convenience functions for handling named capturing parentheses.
2013    
2014     55. Unknown escapes inside character classes (e.g. [\M]) and escapes that
2015     aren't interpreted therein (e.g. [\C]) are literals in Perl. This is now also
2016     true in PCRE, except when the PCRE_EXTENDED option is set, in which case they
2017     are faulted.
2018    
2019     56. Introduced HOST_CC and HOST_CFLAGS which can be set in the environment when
2020     calling configure. These values are used when compiling the dftables.c program
2021     which is run to generate the source of the default character tables. They
2022     default to the values of CC and CFLAGS. If you are cross-compiling PCRE,
2023     you will need to set these values.
2024    
2025     57. Updated the building process for Windows DLL, as provided by Fred Cox.
2026    
2027    
2028     Version 3.9 02-Jan-02
2029 nigel 61 ---------------------
2030    
2031     1. A bit of extraneous text had somehow crept into the pcregrep documentation.
2032    
2033     2. If --disable-static was given, the building process failed when trying to
2034     build pcretest and pcregrep. (For some reason it was using libtool to compile
2035     them, which is not right, as they aren't part of the library.)
2036    
2037    
2038 nigel 59 Version 3.8 18-Dec-01
2039     ---------------------
2040    
2041     1. The experimental UTF-8 code was completely screwed up. It was packing the
2042     bytes in the wrong order. How dumb can you get?
2043    
2044    
2045 nigel 57 Version 3.7 29-Oct-01
2046     ---------------------
2047    
2048     1. In updating pcretest to check change 1 of version 3.6, I screwed up.
2049     This caused pcretest, when used on the test data, to segfault. Unfortunately,
2050     this didn't happen under Solaris 8, where I normally test things.
2051    
2052 nigel 59 2. The Makefile had to be changed to make it work on BSD systems, where 'make'
2053     doesn't seem to recognize that ./xxx and xxx are the same file. (This entry
2054     isn't in ChangeLog distributed with 3.7 because I forgot when I hastily made
2055     this fix an hour or so after the initial 3.7 release.)
2056 nigel 57
2057 nigel 59
2058 nigel 55 Version 3.6 23-Oct-01
2059     ---------------------
2060    
2061     1. Crashed with /(sens|respons)e and \1ibility/ and "sense and sensibility" if
2062     offsets passed as NULL with zero offset count.
2063    
2064     2. The config.guess and config.sub files had not been updated when I moved to
2065     the latest autoconf.
2066    
2067    
2068 nigel 53 Version 3.5 15-Aug-01
2069     ---------------------
2070 nigel 5
2071 nigel 53 1. Added some missing #if !defined NOPOSIX conditionals in pcretest.c that
2072     had been forgotten.
2073    
2074     2. By using declared but undefined structures, we can avoid using "void"
2075     definitions in pcre.h while keeping the internal definitions of the structures
2076     private.
2077    
2078     3. The distribution is now built using autoconf 2.50 and libtool 1.4. From a
2079     user point of view, this means that both static and shared libraries are built
2080     by default, but this can be individually controlled. More of the work of
2081     handling this static/shared cases is now inside libtool instead of PCRE's make
2082     file.
2083    
2084     4. The pcretest utility is now installed along with pcregrep because it is
2085     useful for users (to test regexs) and by doing this, it automatically gets
2086     relinked by libtool. The documentation has been turned into a man page, so
2087     there are now .1, .txt, and .html versions in /doc.
2088    
2089     5. Upgrades to pcregrep:
2090     (i) Added long-form option names like gnu grep.
2091     (ii) Added --help to list all options with an explanatory phrase.
2092     (iii) Added -r, --recursive to recurse into sub-directories.
2093     (iv) Added -f, --file to read patterns from a file.
2094    
2095     6. pcre_exec() was referring to its "code" argument before testing that
2096     argument for NULL (and giving an error if it was NULL).
2097    
2098     7. Upgraded Makefile.in to allow for compiling in a different directory from
2099     the source directory.
2100    
2101     8. Tiny buglet in pcretest: when pcre_fullinfo() was called to retrieve the
2102     options bits, the pointer it was passed was to an int instead of to an unsigned
2103     long int. This mattered only on 64-bit systems.
2104    
2105     9. Fixed typo (3.4/1) in pcre.h again. Sigh. I had changed pcre.h (which is
2106     generated) instead of pcre.in, which it its source. Also made the same change
2107     in several of the .c files.
2108    
2109     10. A new release of gcc defines printf() as a macro, which broke pcretest
2110     because it had an ifdef in the middle of a string argument for printf(). Fixed
2111     by using separate calls to printf().
2112    
2113     11. Added --enable-newline-is-cr and --enable-newline-is-lf to the configure
2114     script, to force use of CR or LF instead of \n in the source. On non-Unix
2115     systems, the value can be set in config.h.
2116    
2117     12. The limit of 200 on non-capturing parentheses is a _nesting_ limit, not an
2118     absolute limit. Changed the text of the error message to make this clear, and
2119     likewise updated the man page.
2120    
2121     13. The limit of 99 on the number of capturing subpatterns has been removed.
2122     The new limit is 65535, which I hope will not be a "real" limit.
2123    
2124    
2125 nigel 51 Version 3.4 22-Aug-00
2126     ---------------------
2127    
2128     1. Fixed typo in pcre.h: unsigned const char * changed to const unsigned char *.
2129    
2130     2. Diagnose condition (?(0) as an error instead of crashing on matching.
2131    
2132    
2133 nigel 49 Version 3.3 01-Aug-00
2134     ---------------------
2135    
2136     1. If an octal character was given, but the value was greater than \377, it
2137     was not getting masked to the least significant bits, as documented. This could
2138     lead to crashes in some systems.
2139    
2140     2. Perl 5.6 (if not earlier versions) accepts classes like [a-\d] and treats
2141     the hyphen as a literal. PCRE used to give an error; it now behaves like Perl.
2142    
2143     3. Added the functions pcre_free_substring() and pcre_free_substring_list().
2144     These just pass their arguments on to (pcre_free)(), but they are provided
2145     because some uses of PCRE bind it to non-C systems that can call its functions,
2146     but cannot call free() or pcre_free() directly.
2147    
2148     4. Add "make test" as a synonym for "make check". Corrected some comments in
2149     the Makefile.
2150    
2151     5. Add $(DESTDIR)/ in front of all the paths in the "install" target in the
2152     Makefile.
2153    
2154     6. Changed the name of pgrep to pcregrep, because Solaris has introduced a
2155     command called pgrep for grepping around the active processes.
2156    
2157     7. Added the beginnings of support for UTF-8 character strings.
2158    
2159     8. Arranged for the Makefile to pass over the settings of CC, CFLAGS, and
2160     RANLIB to ./ltconfig so that they are used by libtool. I think these are all
2161     the relevant ones. (AR is not passed because ./ltconfig does its own figuring
2162     out for the ar command.)
2163    
2164    
2165 nigel 47 Version 3.2 12-May-00
2166     ---------------------
2167    
2168     This is purely a bug fixing release.
2169    
2170     1. If the pattern /((Z)+|A)*/ was matched agained ZABCDEFG it matched Z instead
2171     of ZA. This was just one example of several cases that could provoke this bug,
2172     which was introduced by change 9 of version 2.00. The code for breaking
2173     infinite loops after an iteration that matches an empty string was't working
2174     correctly.
2175    
2176     2. The pcretest program was not imitating Perl correctly for the pattern /a*/g
2177     when matched against abbab (for example). After matching an empty string, it
2178     wasn't forcing anchoring when setting PCRE_NOTEMPTY for the next attempt; this
2179     caused it to match further down the string than it should.
2180    
2181     3. The code contained an inclusion of sys/types.h. It isn't clear why this
2182     was there because it doesn't seem to be needed, and it causes trouble on some
2183     systems, as it is not a Standard C header. It has been removed.
2184    
2185     4. Made 4 silly changes to the source to avoid stupid compiler warnings that
2186     were reported on the Macintosh. The changes were from
2187    
2188     while ((c = *(++ptr)) != 0 && c != '\n');
2189     to
2190     while ((c = *(++ptr)) != 0 && c != '\n') ;
2191    
2192     Totally extraordinary, but if that's what it takes...
2193    
2194     5. PCRE is being used in one environment where neither memmove() nor bcopy() is
2195     available. Added HAVE_BCOPY and an autoconf test for it; if neither
2196     HAVE_MEMMOVE nor HAVE_BCOPY is set, use a built-in emulation function which
2197     assumes the way PCRE uses memmove() (always moving upwards).
2198    
2199     6. PCRE is being used in one environment where strchr() is not available. There
2200     was only one use in pcre.c, and writing it out to avoid strchr() probably gives
2201     faster code anyway.
2202    
2203    
2204 nigel 45 Version 3.1 09-Feb-00
2205     ---------------------
2206    
2207     The only change in this release is the fixing of some bugs in Makefile.in for
2208     the "install" target:
2209    
2210     (1) It was failing to install pcreposix.h.
2211    
2212     (2) It was overwriting the pcre.3 man page with the pcreposix.3 man page.
2213    
2214    
2215 nigel 43 Version 3.0 01-Feb-00
2216     ---------------------
2217 nigel 41
2218     1. Add support for the /+ modifier to perltest (to output $` like it does in
2219     pcretest).
2220    
2221     2. Add support for the /g modifier to perltest.
2222    
2223     3. Fix pcretest so that it behaves even more like Perl for /g when the pattern
2224     matches null strings.
2225    
2226     4. Fix perltest so that it doesn't do unwanted things when fed an empty
2227     pattern. Perl treats empty patterns specially - it reuses the most recent
2228     pattern, which is not what we want. Replace // by /(?#)/ in order to avoid this
2229     effect.
2230    
2231     5. The POSIX interface was broken in that it was just handing over the POSIX
2232     captured string vector to pcre_exec(), but (since release 2.00) PCRE has
2233     required a bigger vector, with some working space on the end. This means that
2234     the POSIX wrapper now has to get and free some memory, and copy the results.
2235    
2236 nigel 43 6. Added some simple autoconf support, placing the test data and the
2237     documentation in separate directories, re-organizing some of the
2238     information files, and making it build pcre-config (a GNU standard). Also added
2239     libtool support for building PCRE as a shared library, which is now the
2240     default.
2241 nigel 41
2242 nigel 43 7. Got rid of the leading zero in the definition of PCRE_MINOR because 08 and
2243     09 are not valid octal constants. Single digits will be used for minor values
2244     less than 10.
2245    
2246     8. Defined REG_EXTENDED and REG_NOSUB as zero in the POSIX header, so that
2247     existing programs that set these in the POSIX interface can use PCRE without
2248     modification.
2249    
2250     9. Added a new function, pcre_fullinfo() with an extensible interface. It can
2251     return all that pcre_info() returns, plus additional data. The pcre_info()
2252     function is retained for compatibility, but is considered to be obsolete.
2253    
2254     10. Added experimental recursion feature (?R) to handle one common case that
2255     Perl 5.6 will be able to do with (?p{...}).
2256    
2257     11. Added support for POSIX character classes like [:alpha:], which Perl is
2258     adopting.
2259    
2260    
2261 nigel 39 Version 2.08 31-Aug-99
2262     ----------------------
2263    
2264     1. When startoffset was not zero and the pattern began with ".*", PCRE was not
2265     trying to match at the startoffset position, but instead was moving forward to
2266     the next newline as if a previous match had failed.
2267    
2268     2. pcretest was not making use of PCRE_NOTEMPTY when repeating for /g and /G,
2269     and could get into a loop if a null string was matched other than at the start
2270     of the subject.
2271    
2272     3. Added definitions of PCRE_MAJOR and PCRE_MINOR to pcre.h so the version can
2273     be distinguished at compile time, and for completeness also added PCRE_DATE.
2274    
2275     5. Added Paul Sokolovsky's minor changes to make it easy to compile a Win32 DLL
2276     in GnuWin32 environments.
2277    
2278    
2279 nigel 37 Version 2.07 29-Jul-99
2280     ----------------------
2281    
2282     1. The documentation is now supplied in plain text form and HTML as well as in
2283     the form of man page sources.
2284    
2285     2. C++ compilers don't like assigning (void *) values to other pointer types.
2286     In particular this affects malloc(). Although there is no problem in Standard
2287     C, I've put in casts to keep C++ compilers happy.
2288    
2289     3. Typo on pcretest.c; a cast of (unsigned char *) in the POSIX regexec() call
2290     should be (const char *).
2291    
2292     4. If NOPOSIX is defined, pcretest.c compiles without POSIX support. This may
2293     be useful for non-Unix systems who don't want to bother with the POSIX stuff.
2294     However, I haven't made this a standard facility. The documentation doesn't
2295     mention it, and the Makefile doesn't support it.
2296    
2297     5. The Makefile now contains an "install" target, with editable destinations at
2298     the top of the file. The pcretest program is not installed.
2299    
2300     6. pgrep -V now gives the PCRE version number and date.
2301    
2302     7. Fixed bug: a zero repetition after a literal string (e.g. /abcde{0}/) was
2303     causing the entire string to be ignored, instead of just the last character.
2304    
2305     8. If a pattern like /"([^\\"]+|\\.)*"/ is applied in the normal way to a
2306     non-matching string, it can take a very, very long time, even for strings of
2307     quite modest length, because of the nested recursion. PCRE now does better in
2308     some of these cases. It does this by remembering the last required literal
2309     character in the pattern, and pre-searching the subject to ensure it is present
2310     before running the real match. In other words, it applies a heuristic to detect
2311     some types of certain failure quickly, and in the above example, if presented
2312     with a string that has no trailing " it gives "no match" very quickly.
2313    
2314     9. A new runtime option PCRE_NOTEMPTY causes null string matches to be ignored;
2315     other alternatives are tried instead.
2316    
2317    
2318 nigel 35 Version 2.06 09-Jun-99
2319     ----------------------
2320    
2321     1. Change pcretest's output for amount of store used to show just the code
2322     space, because the remainder (the data block) varies in size between 32-bit and
2323     64-bit systems.
2324    
2325     2. Added an extra argument to pcre_exec() to supply an offset in the subject to
2326     start matching at. This allows lookbehinds to work when searching for multiple
2327     occurrences in a string.
2328    
2329     3. Added additional options to pcretest for testing multiple occurrences:
2330    
2331     /+ outputs the rest of the string that follows a match
2332     /g loops for multiple occurrences, using the new startoffset argument
2333     /G loops for multiple occurrences by passing an incremented pointer
2334    
2335     4. PCRE wasn't doing the "first character" optimization for patterns starting
2336     with \b or \B, though it was doing it for other lookbehind assertions. That is,
2337     it wasn't noticing that a match for a pattern such as /\bxyz/ has to start with
2338     the letter 'x'. On long subject strings, this gives a significant speed-up.
2339    
2340    
2341 nigel 33 Version 2.05 21-Apr-99
2342     ----------------------
2343    
2344     1. Changed the type of magic_number from int to long int so that it works
2345     properly on 16-bit systems.
2346    
2347     2. Fixed a bug which caused patterns starting with .* not to work correctly
2348     when the subject string contained newline characters. PCRE was assuming
2349     anchoring for such patterns in all cases, which is not correct because .* will
2350     not pass a newline unless PCRE_DOTALL is set. It now assumes anchoring only if
2351     DOTALL is set at top level; otherwise it knows that patterns starting with .*
2352     must be retried after every newline in the subject.
2353    
2354    
2355 nigel 31 Version 2.04 18-Feb-99
2356     ----------------------
2357    
2358     1. For parenthesized subpatterns with repeats whose minimum was zero, the
2359     computation of the store needed to hold the pattern was incorrect (too large).
2360     If such patterns were nested a few deep, this could multiply and become a real
2361     problem.
2362    
2363     2. Added /M option to pcretest to show the memory requirement of a specific
2364     pattern. Made -m a synonym of -s (which does this globally) for compatibility.
2365    
2366     3. Subpatterns of the form (regex){n,m} (i.e. limited maximum) were being
2367     compiled in such a way that the backtracking after subsequent failure was
2368     pessimal. Something like (a){0,3} was compiled as (a)?(a)?(a)? instead of
2369     ((a)((a)(a)?)?)? with disastrous performance if the maximum was of any size.
2370    
2371    
2372 nigel 29 Version 2.03 02-Feb-99
2373     ----------------------
2374    
2375     1. Fixed typo and small mistake in man page.
2376    
2377 nigel 31 2. Added 4th condition (GPL supersedes if conflict) and created separate
2378     LICENCE file containing the conditions.
2379 nigel 29
2380     3. Updated pcretest so that patterns such as /abc\/def/ work like they do in
2381     Perl, that is the internal \ allows the delimiter to be included in the
2382     pattern. Locked out the use of \ as a delimiter. If \ immediately follows
2383     the final delimiter, add \ to the end of the pattern (to test the error).
2384    
2385     4. Added the convenience functions for extracting substrings after a successful
2386     match. Updated pcretest to make it able to test these functions.
2387    
2388    
2389 nigel 27 Version 2.02 14-Jan-99
2390     ----------------------
2391    
2392     1. Initialized the working variables associated with each extraction so that
2393     their saving and restoring doesn't refer to uninitialized store.
2394    
2395     2. Put dummy code into study.c in order to trick the optimizer of the IBM C
2396     compiler for OS/2 into generating correct code. Apparently IBM isn't going to
2397     fix the problem.
2398    
2399     3. Pcretest: the timing code wasn't using LOOPREPEAT for timing execution
2400     calls, and wasn't printing the correct value for compiling calls. Increased the
2401     default value of LOOPREPEAT, and the number of significant figures in the
2402     times.
2403    
2404     4. Changed "/bin/rm" in the Makefile to "-rm" so it works on Windows NT.
2405    
2406     5. Renamed "deftables" as "dftables" to get it down to 8 characters, to avoid
2407     a building problem on Windows NT with a FAT file system.
2408    
2409    
2410 nigel 25 Version 2.01 21-Oct-98
2411     ----------------------
2412    
2413     1. Changed the API for pcre_compile() to allow for the provision of a pointer
2414     to character tables built by pcre_maketables() in the current locale. If NULL
2415     is passed, the default tables are used.
2416    
2417    
2418 nigel 23 Version 2.00 24-Sep-98
2419 nigel 21 ----------------------
2420    
2421 nigel 23 1. Since the (>?) facility is in Perl 5.005, don't require PCRE_EXTRA to enable
2422     it any more.
2423    
2424     2. Allow quantification of (?>) groups, and make it work correctly.
2425    
2426     3. The first character computation wasn't working for (?>) groups.
2427    
2428     4. Correct the implementation of \Z (it is permitted to match on the \n at the
2429     end of the subject) and add 5.005's \z, which really does match only at the
2430     very end of the subject.
2431    
2432     5. Remove the \X "cut" facility; Perl doesn't have it, and (?> is neater.
2433    
2434     6. Remove the ability to specify CASELESS, MULTILINE, DOTALL, and
2435     DOLLAR_END_ONLY at runtime, to make it possible to implement the Perl 5.005
2436     localized options. All options to pcre_study() were also removed.
2437    
2438     7. Add other new features from 5.005:
2439    
2440     $(?<= positive lookbehind
2441     $(?<! negative lookbehind
2442     (?imsx-imsx) added the unsetting capability
2443     such a setting is global if at outer level; local otherwise
2444     (?imsx-imsx:) non-capturing groups with option setting
2445     (?(cond)re|re) conditional pattern matching
2446    
2447     A backreference to itself in a repeated group matches the previous
2448     captured string.
2449    
2450     8. General tidying up of studying (both automatic and via "study")
2451     consequential on the addition of new assertions.
2452    
2453     9. As in 5.005, unlimited repeated groups that could match an empty substring
2454     are no longer faulted at compile time. Instead, the loop is forcibly broken at
2455     runtime if any iteration does actually match an empty substring.
2456    
2457     10. Include the RunTest script in the distribution.
2458    
2459     11. Added tests from the Perl 5.005_02 distribution. This showed up a few
2460     discrepancies, some of which were old and were also with respect to 5.004. They
2461     have now been fixed.
2462    
2463    
2464     Version 1.09 28-Apr-98
2465     ----------------------
2466    
2467 nigel 21 1. A negated single character class followed by a quantifier with a minimum
2468     value of one (e.g. [^x]{1,6} ) was not compiled correctly. This could lead to
2469     program crashes, or just wrong answers. This did not apply to negated classes
2470     containing more than one character, or to minima other than one.
2471    
2472    
2473 nigel 19 Version 1.08 27-Mar-98
2474     ----------------------
2475    
2476     1. Add PCRE_UNGREEDY to invert the greediness of quantifiers.
2477    
2478     2. Add (?U) and (?X) to set PCRE_UNGREEDY and PCRE_EXTRA respectively. The
2479     latter must appear before anything that relies on it in the pattern.
2480    
2481    
2482 nigel 17 Version 1.07 16-Feb-98
2483     ----------------------
2484    
2485     1. A pattern such as /((a)*)*/ was not being diagnosed as in error (unlimited
2486     repeat of a potentially empty string).
2487    
2488    
2489 nigel 15 Version 1.06 23-Jan-98
2490     ----------------------
2491    
2492     1. Added Markus Oberhumer's little patches for C++.
2493    
2494     2. Literal strings longer than 255 characters were broken.
2495    
2496    
2497 nigel 13 Version 1.05 23-Dec-97
2498     ----------------------
2499    
2500     1. Negated character classes containing more than one character were failing if
2501     PCRE_CASELESS was set at run time.
2502    
2503    
2504 nigel 11 Version 1.04 19-Dec-97
2505     ----------------------
2506    
2507     1. Corrected the man page, where some "const" qualifiers had been omitted.
2508    
2509     2. Made debugging output print "{0,xxx}" instead of just "{,xxx}" to agree with
2510     input syntax.
2511    
2512     3. Fixed memory leak which occurred when a regex with back references was
2513     matched with an offsets vector that wasn't big enough. The temporary memory
2514     that is used in this case wasn't being freed if the match failed.
2515    
2516     4. Tidied pcretest to ensure it frees memory that it gets.
2517    
2518     5. Temporary memory was being obtained in the case where the passed offsets
2519     vector was exactly big enough.
2520    
2521     6. Corrected definition of offsetof() from change 5 below.
2522    
2523     7. I had screwed up change 6 below and broken the rules for the use of
2524     setjmp(). Now fixed.
2525    
2526    
2527 nigel 9 Version 1.03 18-Dec-97
2528     ----------------------
2529    
2530     1. A erroneous regex with a missing opening parenthesis was correctly
2531     diagnosed, but PCRE attempted to access brastack[-1], which could cause crashes
2532     on some systems.
2533    
2534     2. Replaced offsetof(real_pcre, code) by offsetof(real_pcre, code[0]) because
2535     it was reported that one broken compiler failed on the former because "code" is
2536     also an independent variable.
2537    
2538     3. The erroneous regex a[]b caused an array overrun reference.
2539    
2540     4. A regex ending with a one-character negative class (e.g. /[^k]$/) did not
2541     fail on data ending with that character. (It was going on too far, and checking
2542     the next character, typically a binary zero.) This was specific to the
2543     optimized code for single-character negative classes.
2544    
2545     5. Added a contributed patch from the TIN world which does the following:
2546    
2547     + Add an undef for memmove, in case the the system defines a macro for it.
2548    
2549     + Add a definition of offsetof(), in case there isn't one. (I don't know
2550     the reason behind this - offsetof() is part of the ANSI standard - but
2551     it does no harm).
2552    
2553     + Reduce the ifdef's in pcre.c using macro DPRINTF, thereby eliminating
2554     most of the places where whitespace preceded '#'. I have given up and
2555     allowed the remaining 2 cases to be at the margin.
2556    
2557     + Rename some variables in pcre to eliminate shadowing. This seems very
2558     pedantic, but does no harm, of course.
2559    
2560     6. Moved the call to setjmp() into its own function, to get rid of warnings
2561     from gcc -Wall, and avoided calling it at all unless PCRE_EXTRA is used.
2562    
2563     7. Constructs such as \d{8,} were compiling into the equivalent of
2564 nigel 11 \d{8}\d{0,65527} instead of \d{8}\d* which didn't make much difference to the
2565 nigel 9 outcome, but in this particular case used more store than had been allocated,
2566     which caused the bug to be discovered because it threw up an internal error.
2567    
2568     8. The debugging code in both pcre and pcretest for outputting the compiled
2569     form of a regex was going wrong in the case of back references followed by
2570     curly-bracketed repeats.
2571    
2572    
2573 nigel 7 Version 1.02 12-Dec-97
2574     ----------------------
2575    
2576     1. Typos in pcre.3 and comments in the source fixed.
2577    
2578     2. Applied a contributed patch to get rid of places where it used to remove
2579     'const' from variables, and fixed some signed/unsigned and uninitialized
2580     variable warnings.
2581    
2582     3. Added the "runtest" target to Makefile.
2583    
2584     4. Set default compiler flag to -O2 rather than just -O.
2585    
2586    
2587 nigel 5 Version 1.01 19-Nov-97
2588     ----------------------
2589    
2590     1. PCRE was failing to diagnose unlimited repeat of empty string for patterns
2591     like /([ab]*)*/, that is, for classes with more than one character in them.
2592    
2593     2. Likewise, it wasn't diagnosing patterns with "once-only" subpatterns, such
2594     as /((?>a*))*/ (a PCRE_EXTRA facility).
2595    
2596    
2597     Version 1.00 18-Nov-97
2598     ----------------------
2599    
2600     1. Added compile-time macros to support systems such as SunOS4 which don't have
2601     memmove() or strerror() but have other things that can be used instead.
2602    
2603     2. Arranged that "make clean" removes the executables.
2604    
2605    
2606 nigel 3 Version 0.99 27-Oct-97
2607     ----------------------
2608    
2609     1. Fixed bug in code for optimizing classes with only one character. It was
2610     initializing a 32-byte map regardless, which could cause it to run off the end
2611     of the memory it had got.
2612    
2613     2. Added, conditional on PCRE_EXTRA, the proposed (?>REGEX) construction.
2614    
2615    
2616     Version 0.98 22-Oct-97
2617     ----------------------
2618    
2619     1. Fixed bug in code for handling temporary memory usage when there are more
2620     back references than supplied space in the ovector. This could cause segfaults.
2621    
2622    
2623     Version 0.97 21-Oct-97
2624     ----------------------
2625    
2626     1. Added the \X "cut" facility, conditional on PCRE_EXTRA.
2627    
2628     2. Optimized negated single characters not to use a bit map.
2629    
2630     3. Brought error texts together as macro definitions; clarified some of them;
2631     fixed one that was wrong - it said "range out of order" when it meant "invalid
2632     escape sequence".
2633    
2634     4. Changed some char * arguments to const char *.
2635    
2636     5. Added PCRE_NOTBOL and PCRE_NOTEOL (from POSIX).
2637    
2638     6. Added the POSIX-style API wrapper in pcreposix.a and testing facilities in
2639     pcretest.
2640    
2641    
2642     Version 0.96 16-Oct-97
2643     ----------------------
2644    
2645     1. Added a simple "pgrep" utility to the distribution.
2646    
2647     2. Fixed an incompatibility with Perl: "{" is now treated as a normal character
2648     unless it appears in one of the precise forms "{ddd}", "{ddd,}", or "{ddd,ddd}"
2649     where "ddd" means "one or more decimal digits".
2650    
2651     3. Fixed serious bug. If a pattern had a back reference, but the call to
2652     pcre_exec() didn't supply a large enough ovector to record the related
2653     identifying subpattern, the match always failed. PCRE now remembers the number
2654     of the largest back reference, and gets some temporary memory in which to save
2655     the offsets during matching if necessary, in order to ensure that
2656     backreferences always work.
2657    
2658     4. Increased the compatibility with Perl in a number of ways:
2659    
2660     (a) . no longer matches \n by default; an option PCRE_DOTALL is provided
2661     to request this handling. The option can be set at compile or exec time.
2662    
2663     (b) $ matches before a terminating newline by default; an option
2664     PCRE_DOLLAR_ENDONLY is provided to override this (but not in multiline
2665     mode). The option can be set at compile or exec time.
2666    
2667     (c) The handling of \ followed by a digit other than 0 is now supposed to be
2668     the same as Perl's. If the decimal number it represents is less than 10
2669     or there aren't that many previous left capturing parentheses, an octal
2670     escape is read. Inside a character class, it's always an octal escape,
2671     even if it is a single digit.
2672    
2673     (d) An escaped but undefined alphabetic character is taken as a literal,
2674     unless PCRE_EXTRA is set. Currently this just reserves the remaining
2675     escapes.
2676    
2677     (e) {0} is now permitted. (The previous item is removed from the compiled
2678     pattern).
2679    
2680     5. Changed all the names of code files so that the basic parts are no longer
2681     than 10 characters, and abolished the teeny "globals.c" file.
2682    
2683     6. Changed the handling of character classes; they are now done with a 32-byte
2684     bit map always.
2685    
2686     7. Added the -d and /D options to pcretest to make it possible to look at the
2687     internals of compilation without having to recompile pcre.
2688    
2689    
2690     Version 0.95 23-Sep-97
2691     ----------------------
2692    
2693     1. Fixed bug in pre-pass concerning escaped "normal" characters such as \x5c or
2694     \x20 at the start of a run of normal characters. These were being treated as
2695     real characters, instead of the source characters being re-checked.
2696    
2697    
2698     Version 0.94 18-Sep-97
2699     ----------------------
2700    
2701     1. The functions are now thread-safe, with the caveat that the global variables
2702     containing pointers to malloc() and free() or alternative functions are the
2703     same for all threads.
2704    
2705     2. Get pcre_study() to generate a bitmap of initial characters for non-
2706     anchored patterns when this is possible, and use it if passed to pcre_exec().
2707    
2708    
2709     Version 0.93 15-Sep-97
2710     ----------------------
2711    
2712     1. /(b)|(:+)/ was computing an incorrect first character.
2713    
2714     2. Add pcre_study() to the API and the passing of pcre_extra to pcre_exec(),
2715     but not actually doing anything yet.
2716    
2717     3. Treat "-" characters in classes that cannot be part of ranges as literals,
2718     as Perl does (e.g. [-az] or [az-]).
2719    
2720     4. Set the anchored flag if a branch starts with .* or .*? because that tests
2721     all possible positions.
2722    
2723     5. Split up into different modules to avoid including unneeded functions in a
2724     compiled binary. However, compile and exec are still in one module. The "study"
2725     function is split off.
2726    
2727     6. The character tables are now in a separate module whose source is generated
2728     by an auxiliary program - but can then be edited by hand if required. There are
2729     now no calls to isalnum(), isspace(), isdigit(), isxdigit(), tolower() or
2730     toupper() in the code.
2731    
2732     7. Turn the malloc/free funtions variables into pcre_malloc and pcre_free and
2733     make them global. Abolish the function for setting them, as the caller can now
2734     set them directly.
2735    
2736    
2737     Version 0.92 11-Sep-97
2738     ----------------------
2739    
2740     1. A repeat with a fixed maximum and a minimum of 1 for an ordinary character
2741     (e.g. /a{1,3}/) was broken (I mis-optimized it).
2742    
2743     2. Caseless matching was not working in character classes if the characters in
2744     the pattern were in upper case.
2745    
2746     3. Make ranges like [W-c] work in the same way as Perl for caseless matching.
2747    
2748     4. Make PCRE_ANCHORED public and accept as a compile option.
2749    
2750     5. Add an options word to pcre_exec() and accept PCRE_ANCHORED and
2751     PCRE_CASELESS at run time. Add escapes \A and \I to pcretest to cause it to
2752     pass them.
2753    
2754     6. Give an error if bad option bits passed at compile or run time.
2755    
2756     7. Add PCRE_MULTILINE at compile and exec time, and (?m) as well. Add \M to
2757     pcretest to cause it to pass that flag.
2758    
2759     8. Add pcre_info(), to get the number of identifying subpatterns, the stored
2760     options, and the first character, if set.
2761    
2762     9. Recognize C+ or C{n,m} where n >= 1 as providing a fixed starting character.
2763    
2764    
2765     Version 0.91 10-Sep-97
2766     ----------------------
2767    
2768     1. PCRE was failing to diagnose unlimited repeats of subpatterns that could
2769     match the empty string as in /(a*)*/. It was looping and ultimately crashing.
2770    
2771     2. PCRE was looping on encountering an indefinitely repeated back reference to
2772     a subpattern that had matched an empty string, e.g. /(a|)\1*/. It now does what
2773     Perl does - treats the match as successful.
2774    
2775     ****

Properties

Name Value
svn:eol-style native
svn:keywords "Author Date Id Revision Url"

webmaster@exim.org
ViewVC Help
Powered by ViewVC 1.1.12