tags/pcre-5.0/pcre.c

/*************************************************
*      Perl-Compatible Regular Expressions       *
*************************************************/

/*
This is a library of functions to support regular expressions whose syntax
and semantics are as close as possible to those of the Perl 5 language. See
the file Tech.Notes for some information on the internals.

Written by: Philip Hazel <ph10@cam.ac.uk>

           Copyright (c) 1997-2004 University of Cambridge

-----------------------------------------------------------------------------
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:

    * Redistributions of source code must retain the above copyright notice,
      this list of conditions and the following disclaimer.

    * Redistributions in binary form must reproduce the above copyright
      notice, this list of conditions and the following disclaimer in the
      documentation and/or other materials provided with the distribution.

    * Neither the name of the University of Cambridge nor the names of its
      contributors may be used to endorse or promote products derived from
      this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
-----------------------------------------------------------------------------
*/


/* Define DEBUG to get debugging output on stdout. */
/* #define DEBUG */

/* Use a macro for debugging printing, 'cause that eliminates the use of #ifdef
inline, and there are *still* stupid compilers about that don't like indented
pre-processor statements. I suppose it's only been 10 years... */

#ifdef DEBUG
#define DPRINTF(p) printf p
#else
#define DPRINTF(p) /*nothing*/
#endif

/* Include the internals header, which itself includes "config.h", the Standard
C headers, and the external pcre header. */

#include "internal.h"

/* If Unicode Property support is wanted, include a private copy of the
function that does it, and the table that translates names to numbers. */

#ifdef SUPPORT_UCP
#include "ucp.c"
#include "ucptypetable.c"
#endif

/* Maximum number of items on the nested bracket stacks at compile time. This
applies to the nesting of all kinds of parentheses. It does not limit
un-nested, non-capturing parentheses. This number can be made bigger if
necessary - it is used to dimension one int and one unsigned char vector at
compile time. */

#define BRASTACK_SIZE 200


/* Maximum number of ints of offset to save on the stack for recursive calls.
If the offset vector is bigger, malloc is used. This should be a multiple of 3,
because the offset vector is always a multiple of 3 long. */

#define REC_STACK_SAVE_MAX 30


/* The maximum remaining length of subject we are prepared to search for a
req_byte match. */

#define REQ_BYTE_MAX 1000


/* Table of sizes for the fixed-length opcodes. It's defined in a macro so that
the definition is next to the definition of the opcodes in internal.h. */

static const uschar OP_lengths[] = { OP_LENGTHS };

/* Min and max values for the common repeats; for the maxima, 0 => infinity */

static const char rep_min[] = { 0, 0, 1, 1, 0, 0 };
static const char rep_max[] = { 0, 0, 0, 0, 1, 1 };

/* Table for handling escaped characters in the range '0'-'z'. Positive returns
are simple data values; negative values are for special things like \d and so
on. Zero means further processing is needed (for things like \x), or the escape
is invalid. */

#if !EBCDIC   /* This is the "normal" table for ASCII systems */
static const short int escapes[] = {
     0,      0,      0,      0,      0,      0,      0,      0,   /* 0 - 7 */
     0,      0,    ':',    ';',    '<',    '=',    '>',    '?',   /* 8 - ? */
   '@', -ESC_A, -ESC_B, -ESC_C, -ESC_D, -ESC_E,      0, -ESC_G,   /* @ - G */
     0,      0,      0,      0,      0,      0,      0,      0,   /* H - O */
-ESC_P, -ESC_Q,      0, -ESC_S,      0,      0,      0, -ESC_W,   /* P - W */
-ESC_X,      0, -ESC_Z,    '[',   '\\',    ']',    '^',    '_',   /* X - _ */
   '`',      7, -ESC_b,      0, -ESC_d,  ESC_e,  ESC_f,      0,   /* ` - g */
     0,      0,      0,      0,      0,      0,  ESC_n,      0,   /* h - o */
-ESC_p,      0,  ESC_r, -ESC_s,  ESC_tee,    0,      0, -ESC_w,   /* p - w */
     0,      0, -ESC_z                                            /* x - z */
};

#else         /* This is the "abnormal" table for EBCDIC systems */
static const short int escapes[] = {
/*  48 */     0,     0,      0,     '.',    '<',   '(',    '+',    '|',
/*  50 */   '&',     0,      0,       0,      0,     0,      0,      0,
/*  58 */     0,     0,    '!',     '$',    '*',   ')',    ';',    '~',
/*  60 */   '-',   '/',      0,       0,      0,     0,      0,      0,
/*  68 */     0,     0,    '|',     ',',    '%',   '_',    '>',    '?',
/*  70 */     0,     0,      0,       0,      0,     0,      0,      0,
/*  78 */     0,   '`',    ':',     '#',    '@',  '\'',    '=',    '"',
/*  80 */     0,     7, -ESC_b,       0, -ESC_d, ESC_e,  ESC_f,      0,
/*  88 */     0,     0,      0,     '{',      0,     0,      0,      0,
/*  90 */     0,     0,      0,     'l',      0, ESC_n,      0, -ESC_p,
/*  98 */     0, ESC_r,      0,     '}',      0,     0,      0,      0,
/*  A0 */     0,   '~', -ESC_s, ESC_tee,      0,     0, -ESC_w,      0,
/*  A8 */     0,-ESC_z,      0,       0,      0,   '[',      0,      0,
/*  B0 */     0,     0,      0,       0,      0,     0,      0,      0,
/*  B8 */     0,     0,      0,       0,      0,   ']',    '=',    '-',
/*  C0 */   '{',-ESC_A, -ESC_B,  -ESC_C, -ESC_D,-ESC_E,      0, -ESC_G,
/*  C8 */     0,     0,      0,       0,      0,     0,      0,      0,
/*  D0 */   '}',     0,      0,       0,      0,     0,      0, -ESC_P,
/*  D8 */-ESC_Q,     0,      0,       0,      0,     0,      0,      0,
/*  E0 */  '\\',     0, -ESC_S,       0,      0,     0, -ESC_W, -ESC_X,
/*  E8 */     0,-ESC_Z,      0,       0,      0,     0,      0,      0,
/*  F0 */     0,     0,      0,       0,      0,     0,      0,      0,
/*  F8 */     0,     0,      0,       0,      0,     0,      0,      0
};
#endif


/* Tables of names of POSIX character classes and their lengths. The list is
terminated by a zero length entry. The first three must be alpha, upper, lower,
as this is assumed for handling case independence. */

static const char *const posix_names[] = {
  "alpha", "lower", "upper",
  "alnum", "ascii", "blank", "cntrl", "digit", "graph",
  "print", "punct", "space", "word",  "xdigit" };

static const uschar posix_name_lengths[] = {
  5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 4, 6, 0 };

/* Table of class bit maps for each POSIX class; up to three may be combined
to form the class. The table for [:blank:] is dynamically modified to remove
the vertical space characters. */

static const int posix_class_maps[] = {
  cbit_lower, cbit_upper, -1,             /* alpha */
  cbit_lower, -1,         -1,             /* lower */
  cbit_upper, -1,         -1,             /* upper */
  cbit_digit, cbit_lower, cbit_upper,     /* alnum */
  cbit_print, cbit_cntrl, -1,             /* ascii */
  cbit_space, -1,         -1,             /* blank - a GNU extension */
  cbit_cntrl, -1,         -1,             /* cntrl */
  cbit_digit, -1,         -1,             /* digit */
  cbit_graph, -1,         -1,             /* graph */
  cbit_print, -1,         -1,             /* print */
  cbit_punct, -1,         -1,             /* punct */
  cbit_space, -1,         -1,             /* space */
  cbit_word,  -1,         -1,             /* word - a Perl extension */
  cbit_xdigit,-1,         -1              /* xdigit */
};

/* Table to identify digits and hex digits. This is used when compiling
patterns. Note that the tables in chartables are dependent on the locale, and
may mark arbitrary characters as digits - but the PCRE compiling code expects
to handle only 0-9, a-z, and A-Z as digits when compiling. That is why we have
a private table here. It costs 256 bytes, but it is a lot faster than doing
character value tests (at least in some simple cases I timed), and in some
applications one wants PCRE to compile efficiently as well as match
efficiently.

For convenience, we use the same bit definitions as in chartables:

  0x04   decimal digit
  0x08   hexadecimal digit

Then we can use ctype_digit and ctype_xdigit in the code. */

#if !EBCDIC    /* This is the "normal" case, for ASCII systems */
static const unsigned char digitab[] =
  {
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*   0-  7 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*   8- 15 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  16- 23 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  24- 31 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*    - '  */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  ( - /  */
  0x0c,0x0c,0x0c,0x0c,0x0c,0x0c,0x0c,0x0c, /*  0 - 7  */
  0x0c,0x0c,0x00,0x00,0x00,0x00,0x00,0x00, /*  8 - ?  */
  0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x00, /*  @ - G  */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  H - O  */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  P - W  */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  X - _  */
  0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x00, /*  ` - g  */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  h - o  */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  p - w  */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  x -127 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 128-135 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 136-143 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 144-151 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 152-159 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 160-167 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 168-175 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 176-183 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 184-191 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 192-199 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 200-207 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 208-215 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 216-223 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 224-231 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 232-239 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 240-247 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};/* 248-255 */

#else          /* This is the "abnormal" case, for EBCDIC systems */
static const unsigned char digitab[] =
  {
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*   0-  7  0 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*   8- 15    */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  16- 23 10 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  24- 31    */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  32- 39 20 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  40- 47    */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  48- 55 30 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  56- 63    */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*    - 71 40 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  72- |     */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  & - 87 50 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  88- �     */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  - -103 60 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 104- ?     */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 112-119 70 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 120- "     */
  0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x00, /* 128- g  80 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  h -143    */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 144- p  90 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  q -159    */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 160- x  A0 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  y -175    */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  ^ -183 B0 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 184-191    */
  0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x00, /*  { - G  C0 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  H -207    */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  } - P  D0 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  Q -223    */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  \ - X  E0 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  Y -239    */
  0x0c,0x0c,0x0c,0x0c,0x0c,0x0c,0x0c,0x0c, /*  0 - 7  F0 */
  0x0c,0x0c,0x00,0x00,0x00,0x00,0x00,0x00};/*  8 -255    */

static const unsigned char ebcdic_chartab[] = { /* chartable partial dup */
  0x80,0x00,0x00,0x00,0x00,0x01,0x00,0x00, /*   0-  7 */
  0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00, /*   8- 15 */
  0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00, /*  16- 23 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  24- 31 */
  0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00, /*  32- 39 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  40- 47 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  48- 55 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  56- 63 */
  0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*    - 71 */
  0x00,0x00,0x00,0x80,0x00,0x80,0x80,0x80, /*  72- |  */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  & - 87 */
  0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00, /*  88- �  */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  - -103 */
  0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x80, /* 104- ?  */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 112-119 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 120- "  */
  0x00,0x1a,0x1a,0x1a,0x1a,0x1a,0x1a,0x12, /* 128- g  */
  0x12,0x12,0x00,0x00,0x00,0x00,0x00,0x00, /*  h -143 */
  0x00,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /* 144- p  */
  0x12,0x12,0x00,0x00,0x00,0x00,0x00,0x00, /*  q -159 */
  0x00,0x00,0x12,0x12,0x12,0x12,0x12,0x12, /* 160- x  */
  0x12,0x12,0x00,0x00,0x00,0x00,0x00,0x00, /*  y -175 */
  0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  ^ -183 */
  0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00, /* 184-191 */
  0x80,0x1a,0x1a,0x1a,0x1a,0x1a,0x1a,0x12, /*  { - G  */
  0x12,0x12,0x00,0x00,0x00,0x00,0x00,0x00, /*  H -207 */
  0x00,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /*  } - P  */
  0x12,0x12,0x00,0x00,0x00,0x00,0x00,0x00, /*  Q -223 */
  0x00,0x00,0x12,0x12,0x12,0x12,0x12,0x12, /*  \ - X  */
  0x12,0x12,0x00,0x00,0x00,0x00,0x00,0x00, /*  Y -239 */
  0x1c,0x1c,0x1c,0x1c,0x1c,0x1c,0x1c,0x1c, /*  0 - 7  */
  0x1c,0x1c,0x00,0x00,0x00,0x00,0x00,0x00};/*  8 -255 */
#endif


/* Definition to allow mutual recursion */

static BOOL
  compile_regex(int, int, int *, uschar **, const uschar **, const char **,
    BOOL, int, int *, int *, branch_chain *, compile_data *);

/* Structure for building a chain of data that actually lives on the
stack, for holding the values of the subject pointer at the start of each
subpattern, so as to detect when an empty string has been matched by a
subpattern - to break infinite loops. When NO_RECURSE is set, these blocks
are on the heap, not on the stack. */

typedef struct eptrblock {
  struct eptrblock *epb_prev;
  const uschar *epb_saved_eptr;
} eptrblock;

/* Flag bits for the match() function */

#define match_condassert   0x01    /* Called to check a condition assertion */
#define match_isgroup      0x02    /* Set if start of bracketed group */

/* Non-error returns from the match() function. Error returns are externally
defined PCRE_ERROR_xxx codes, which are all negative. */

#define MATCH_MATCH        1
#define MATCH_NOMATCH      0


/*************************************************
*               Global variables                 *
*************************************************/

/* PCRE is thread-clean and doesn't use any global variables in the normal
sense. However, it calls memory allocation and free functions via the four
indirections below, and it can optionally do callouts. These values can be
changed by the caller, but are shared between all threads. However, when
compiling for Virtual Pascal, things are done differently (see pcre.in). */

#ifndef VPCOMPAT
#ifdef __cplusplus
extern "C" void *(*pcre_malloc)(size_t) = malloc;
extern "C" void  (*pcre_free)(void *) = free;
extern "C" void *(*pcre_stack_malloc)(size_t) = malloc;
extern "C" void  (*pcre_stack_free)(void *) = free;
extern "C" int   (*pcre_callout)(pcre_callout_block *) = NULL;
#else
void *(*pcre_malloc)(size_t) = malloc;
void  (*pcre_free)(void *) = free;
void *(*pcre_stack_malloc)(size_t) = malloc;
void  (*pcre_stack_free)(void *) = free;
int   (*pcre_callout)(pcre_callout_block *) = NULL;
#endif
#endif


/*************************************************
*    Macros and tables for character handling    *
*************************************************/

/* When UTF-8 encoding is being used, a character is no longer just a single
byte. The macros for character handling generate simple sequences when used in
byte-mode, and more complicated ones for UTF-8 characters. */

#ifndef SUPPORT_UTF8
#define GETCHAR(c, eptr) c = *eptr;
#define GETCHARINC(c, eptr) c = *eptr++;
#define GETCHARINCTEST(c, eptr) c = *eptr++;
#define GETCHARLEN(c, eptr, len) c = *eptr;
#define BACKCHAR(eptr)

#else   /* SUPPORT_UTF8 */

/* Get the next UTF-8 character, not advancing the pointer. This is called when
we know we are in UTF-8 mode. */

#define GETCHAR(c, eptr) \
  c = *eptr; \
  if ((c & 0xc0) == 0xc0) \
    { \
    int gcii; \
    int gcaa = utf8_table4[c & 0x3f];  /* Number of additional bytes */ \
    int gcss = 6*gcaa; \
    c = (c & utf8_table3[gcaa]) << gcss; \
    for (gcii = 1; gcii <= gcaa; gcii++) \
      { \
      gcss -= 6; \
      c |= (eptr[gcii] & 0x3f) << gcss; \
      } \
    }

/* Get the next UTF-8 character, advancing the pointer. This is called when we
know we are in UTF-8 mode. */

#define GETCHARINC(c, eptr) \
  c = *eptr++; \
  if ((c & 0xc0) == 0xc0) \
    { \
    int gcaa = utf8_table4[c & 0x3f];  /* Number of additional bytes */ \
    int gcss = 6*gcaa; \
    c = (c & utf8_table3[gcaa]) << gcss; \
    while (gcaa-- > 0) \
      { \
      gcss -= 6; \
      c |= (*eptr++ & 0x3f) << gcss; \
      } \
    }

/* Get the next character, testing for UTF-8 mode, and advancing the pointer */

#define GETCHARINCTEST(c, eptr) \
  c = *eptr++; \
  if (md->utf8 && (c & 0xc0) == 0xc0) \
    { \
    int gcaa = utf8_table4[c & 0x3f];  /* Number of additional bytes */ \
    int gcss = 6*gcaa; \
    c = (c & utf8_table3[gcaa]) << gcss; \
    while (gcaa-- > 0) \
      { \
      gcss -= 6; \
      c |= (*eptr++ & 0x3f) << gcss; \
      } \
    }

/* Get the next UTF-8 character, not advancing the pointer, incrementing length
if there are extra bytes. This is called when we know we are in UTF-8 mode. */

#define GETCHARLEN(c, eptr, len) \
  c = *eptr; \
  if ((c & 0xc0) == 0xc0) \
    { \
    int gcii; \
    int gcaa = utf8_table4[c & 0x3f];  /* Number of additional bytes */ \
    int gcss = 6*gcaa; \
    c = (c & utf8_table3[gcaa]) << gcss; \
    for (gcii = 1; gcii <= gcaa; gcii++) \
      { \
      gcss -= 6; \
      c |= (eptr[gcii] & 0x3f) << gcss; \
      } \
    len += gcaa; \
    }

/* If the pointer is not at the start of a character, move it back until
it is. Called only in UTF-8 mode. */

#define BACKCHAR(eptr) while((*eptr & 0xc0) == 0x80) eptr--;

#endif


/*************************************************
*             Default character tables           *
*************************************************/

/* A default set of character tables is included in the PCRE binary. Its source
is built by the maketables auxiliary program, which uses the default C ctypes
functions, and put in the file chartables.c. These tables are used by PCRE
whenever the caller of pcre_compile() does not provide an alternate set of
tables. */

#include "chartables.c"


#ifdef SUPPORT_UTF8
/*************************************************
*           Tables for UTF-8 support             *
*************************************************/

/* These are the breakpoints for different numbers of bytes in a UTF-8
character. */

static const int utf8_table1[] =
  { 0x7f, 0x7ff, 0xffff, 0x1fffff, 0x3ffffff, 0x7fffffff};

/* These are the indicator bits and the mask for the data bits to set in the
first byte of a character, indexed by the number of additional bytes. */

static const int utf8_table2[] = { 0,    0xc0, 0xe0, 0xf0, 0xf8, 0xfc};
static const int utf8_table3[] = { 0xff, 0x1f, 0x0f, 0x07, 0x03, 0x01};

/* Table of the number of extra characters, indexed by the first character
masked with 0x3f. The highest number for a valid UTF-8 character is in fact
0x3d. */

static const uschar utf8_table4[] = {
  1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  3,3,3,3,3,3,3,3,4,4,4,4,5,5,5,5 };


/*************************************************
*       Convert character value to UTF-8         *
*************************************************/

/* This function takes an integer value in the range 0 - 0x7fffffff
and encodes it as a UTF-8 character in 0 to 6 bytes.

Arguments:
  cvalue     the character value
  buffer     pointer to buffer for result - at least 6 bytes long

Returns:     number of characters placed in the buffer
*/

static int
ord2utf8(int cvalue, uschar *buffer)
{
register int i, j;
for (i = 0; i < sizeof(utf8_table1)/sizeof(int); i++)
  if (cvalue <= utf8_table1[i]) break;
buffer += i;
for (j = i; j > 0; j--)
 {
 *buffer-- = 0x80 | (cvalue & 0x3f);
 cvalue >>= 6;
 }
*buffer = utf8_table2[i] | cvalue;
return i + 1;
}
#endif


/*************************************************
*         Print compiled regex                   *
*************************************************/

/* The code for doing this is held in a separate file that is also included in
pcretest.c. It defines a function called print_internals(). */

#ifdef DEBUG
#include "printint.c"
#endif


/*************************************************
*          Return version string                 *
*************************************************/

#define STRING(a)  # a
#define XSTRING(s) STRING(s)

EXPORT const char *
pcre_version(void)
{
return XSTRING(PCRE_MAJOR) "." XSTRING(PCRE_MINOR) " " XSTRING(PCRE_DATE);
}


/*************************************************
*         Flip bytes in an integer               *
*************************************************/

/* This function is called when the magic number in a regex doesn't match in
order to flip its bytes to see if we are dealing with a pattern that was
compiled on a host of different endianness. If so, this function is used to
flip other byte values.

Arguments:
  value        the number to flip
  n            the number of bytes to flip (assumed to be 2 or 4)

Returns:       the flipped value
*/

static long int
byteflip(long int value, int n)
{
if (n == 2) return ((value & 0x00ff) << 8) | ((value & 0xff00) >> 8);
return ((value & 0x000000ff) << 24) |
       ((value & 0x0000ff00) <<  8) |
       ((value & 0x00ff0000) >>  8) |
       ((value & 0xff000000) >> 24);
}


/*************************************************
*       Test for a byte-flipped compiled regex   *
*************************************************/

/* This function is called from pce_exec() and also from pcre_fullinfo(). Its
job is to test whether the regex is byte-flipped - that is, it was compiled on
a system of opposite endianness. The function is called only when the native
MAGIC_NUMBER test fails. If the regex is indeed flipped, we flip all the
relevant values into a different data block, and return it.

Arguments:
  re               points to the regex
  study            points to study data, or NULL
  internal_re      points to a new regex block
  internal_study   points to a new study block

Returns:           the new block if is is indeed a byte-flipped regex
                   NULL if it is not
*/

static real_pcre *
try_flipped(const real_pcre *re, real_pcre *internal_re,
  const pcre_study_data *study, pcre_study_data *internal_study)
{
if (byteflip(re->magic_number, sizeof(re->magic_number)) != MAGIC_NUMBER)
  return NULL;

*internal_re = *re;           /* To copy other fields */
internal_re->size = byteflip(re->size, sizeof(re->size));
internal_re->options = byteflip(re->options, sizeof(re->options));
internal_re->top_bracket = byteflip(re->top_bracket, sizeof(re->top_bracket));
internal_re->top_backref = byteflip(re->top_backref, sizeof(re->top_backref));
internal_re->first_byte = byteflip(re->first_byte, sizeof(re->first_byte));
internal_re->req_byte = byteflip(re->req_byte, sizeof(re->req_byte));
internal_re->name_table_offset = byteflip(re->name_table_offset,
  sizeof(re->name_table_offset));
internal_re->name_entry_size = byteflip(re->name_entry_size,
  sizeof(re->name_entry_size));
internal_re->name_count = byteflip(re->name_count, sizeof(re->name_count));

if (study != NULL)
  {
  *internal_study = *study;   /* To copy other fields */
  internal_study->size = byteflip(study->size, sizeof(study->size));
  internal_study->options = byteflip(study->options, sizeof(study->options));
  }

return internal_re;
}


/*************************************************
* (Obsolete) Return info about compiled pattern  *
*************************************************/

/* This is the original "info" function. It picks potentially useful data out
of the private structure, but its interface was too rigid. It remains for
backwards compatibility. The public options are passed back in an int - though
the re->options field has been expanded to a long int, all the public options
at the low end of it, and so even on 16-bit systems this will still be OK.
Therefore, I haven't changed the API for pcre_info().

Arguments:
  argument_re   points to compiled code
  optptr        where to pass back the options
  first_byte    where to pass back the first character,
                or -1 if multiline and all branches start ^,
                or -2 otherwise

Returns:        number of capturing subpatterns
                or negative values on error
*/

EXPORT int
pcre_info(const pcre *argument_re, int *optptr, int *first_byte)
{
real_pcre internal_re;
const real_pcre *re = (const real_pcre *)argument_re;
if (re == NULL) return PCRE_ERROR_NULL;
if (re->magic_number != MAGIC_NUMBER)
  {
  re = try_flipped(re, &internal_re, NULL, NULL);
  if (re == NULL) return PCRE_ERROR_BADMAGIC;
  }
if (optptr != NULL) *optptr = (int)(re->options & PUBLIC_OPTIONS);
if (first_byte != NULL)
  *first_byte = ((re->options & PCRE_FIRSTSET) != 0)? re->first_byte :
     ((re->options & PCRE_STARTLINE) != 0)? -1 : -2;
return re->top_bracket;
}


/*************************************************
*        Return info about compiled pattern      *
*************************************************/

/* This is a newer "info" function which has an extensible interface so
that additional items can be added compatibly.

Arguments:
  argument_re      points to compiled code
  extra_data       points extra data, or NULL
  what             what information is required
  where            where to put the information

Returns:           0 if data returned, negative on error
*/

EXPORT int
pcre_fullinfo(const pcre *argument_re, const pcre_extra *extra_data, int what,
  void *where)
{
real_pcre internal_re;
pcre_study_data internal_study;
const real_pcre *re = (const real_pcre *)argument_re;
const pcre_study_data *study = NULL;

if (re == NULL || where == NULL) return PCRE_ERROR_NULL;

if (extra_data != NULL && (extra_data->flags & PCRE_EXTRA_STUDY_DATA) != 0)
  study = (const pcre_study_data *)extra_data->study_data;

if (re->magic_number != MAGIC_NUMBER)
  {
  re = try_flipped(re, &internal_re, study, &internal_study);
  if (re == NULL) return PCRE_ERROR_BADMAGIC;
  if (study != NULL) study = &internal_study;
  }

switch (what)
  {
  case PCRE_INFO_OPTIONS:
  *((unsigned long int *)where) = re->options & PUBLIC_OPTIONS;
  break;

  case PCRE_INFO_SIZE:
  *((size_t *)where) = re->size;
  break;

  case PCRE_INFO_STUDYSIZE:
  *((size_t *)where) = (study == NULL)? 0 : study->size;
  break;

  case PCRE_INFO_CAPTURECOUNT:
  *((int *)where) = re->top_bracket;
  break;

  case PCRE_INFO_BACKREFMAX:
  *((int *)where) = re->top_backref;
  break;

  case PCRE_INFO_FIRSTBYTE:
  *((int *)where) =
    ((re->options & PCRE_FIRSTSET) != 0)? re->first_byte :
    ((re->options & PCRE_STARTLINE) != 0)? -1 : -2;
  break;

  /* Make sure we pass back the pointer to the bit vector in the external
  block, not the internal copy (with flipped integer fields). */

  case PCRE_INFO_FIRSTTABLE:
  *((const uschar **)where) =
    (study != NULL && (study->options & PCRE_STUDY_MAPPED) != 0)?
      ((const pcre_study_data *)extra_data->study_data)->start_bits : NULL;
  break;

  case PCRE_INFO_LASTLITERAL:
  *((int *)where) =
    ((re->options & PCRE_REQCHSET) != 0)? re->req_byte : -1;
  break;

  case PCRE_INFO_NAMEENTRYSIZE:
  *((int *)where) = re->name_entry_size;
  break;

  case PCRE_INFO_NAMECOUNT:
  *((int *)where) = re->name_count;
  break;

  case PCRE_INFO_NAMETABLE:
  *((const uschar **)where) = (const uschar *)re + re->name_table_offset;
  break;

  case PCRE_INFO_DEFAULT_TABLES:
  *((const uschar **)where) = (const uschar *)pcre_default_tables;
  break;

  default: return PCRE_ERROR_BADOPTION;
  }

return 0;
}


/*************************************************
* Return info about what features are configured *
*************************************************/

/* This is function which has an extensible interface so that additional items
can be added compatibly.

Arguments:
  what             what information is required
  where            where to put the information

Returns:           0 if data returned, negative on error
*/

EXPORT int
pcre_config(int what, void *where)
{
switch (what)
  {
  case PCRE_CONFIG_UTF8:
#ifdef SUPPORT_UTF8
  *((int *)where) = 1;
#else
  *((int *)where) = 0;
#endif
  break;

  case PCRE_CONFIG_UNICODE_PROPERTIES:
#ifdef SUPPORT_UCP
  *((int *)where) = 1;
#else
  *((int *)where) = 0;
#endif
  break;

  case PCRE_CONFIG_NEWLINE:
  *((int *)where) = NEWLINE;
  break;

  case PCRE_CONFIG_LINK_SIZE:
  *((int *)where) = LINK_SIZE;
  break;

  case PCRE_CONFIG_POSIX_MALLOC_THRESHOLD:
  *((int *)where) = POSIX_MALLOC_THRESHOLD;
  break;

  case PCRE_CONFIG_MATCH_LIMIT:
  *((unsigned int *)where) = MATCH_LIMIT;
  break;

  case PCRE_CONFIG_STACKRECURSE:
#ifdef NO_RECURSE
  *((int *)where) = 0;
#else
  *((int *)where) = 1;
#endif
  break;

  default: return PCRE_ERROR_BADOPTION;
  }

return 0;
}


#ifdef DEBUG
/*************************************************
*        Debugging function to print chars       *
*************************************************/

/* Print a sequence of chars in printable format, stopping at the end of the
subject if the requested.

Arguments:
  p           points to characters
  length      number to print
  is_subject  TRUE if printing from within md->start_subject
  md          pointer to matching data block, if is_subject is TRUE

Returns:     nothing
*/

static void
pchars(const uschar *p, int length, BOOL is_subject, match_data *md)
{
int c;
if (is_subject && length > md->end_subject - p) length = md->end_subject - p;
while (length-- > 0)
  if (isprint(c = *(p++))) printf("%c", c); else printf("\\x%02x", c);
}
#endif


/*************************************************
*            Handle escapes                      *
*************************************************/

/* This function is called when a \ has been encountered. It either returns a
positive value for a simple escape such as \n, or a negative value which
encodes one of the more complicated things such as \d. When UTF-8 is enabled,
a positive value greater than 255 may be returned. On entry, ptr is pointing at
the \. On exit, it is on the final character of the escape sequence.

Arguments:
  ptrptr     points to the pattern position pointer
  errorptr   points to the pointer to the error message
  bracount   number of previous extracting brackets
  options    the options bits
  isclass    TRUE if inside a character class

Returns:     zero or positive => a data character
             negative => a special escape sequence
             on error, errorptr is set
*/

static int
check_escape(const uschar **ptrptr, const char **errorptr, int bracount,
  int options, BOOL isclass)
{
const uschar *ptr = *ptrptr;
int c, i;

/* If backslash is at the end of the pattern, it's an error. */

c = *(++ptr);
if (c == 0) *errorptr = ERR1;

/* Non-alphamerics are literals. For digits or letters, do an initial lookup in
a table. A non-zero result is something that can be returned immediately.
Otherwise further processing may be required. */

#if !EBCDIC    /* ASCII coding */
else if (c < '0' || c > 'z') {}                           /* Not alphameric */
else if ((i = escapes[c - '0']) != 0) c = i;

#else          /* EBCDIC coding */
else if (c < 'a' || (ebcdic_chartab[c] & 0x0E) == 0) {}   /* Not alphameric */
else if ((i = escapes[c - 0x48]) != 0)  c = i;
#endif

/* Escapes that need further processing, or are illegal. */

else
  {
  const uschar *oldptr;
  switch (c)
    {
    /* A number of Perl escapes are not handled by PCRE. We give an explicit
    error. */

    case 'l':
    case 'L':
    case 'N':
    case 'u':
    case 'U':
    *errorptr = ERR37;
    break;

    /* The handling of escape sequences consisting of a string of digits
    starting with one that is not zero is not straightforward. By experiment,
    the way Perl works seems to be as follows:

    Outside a character class, the digits are read as a decimal number. If the
    number is less than 10, or if there are that many previous extracting
    left brackets, then it is a back reference. Otherwise, up to three octal
    digits are read to form an escaped byte. Thus \123 is likely to be octal
    123 (cf \0123, which is octal 012 followed by the literal 3). If the octal
    value is greater than 377, the least significant 8 bits are taken. Inside a
    character class, \ followed by a digit is always an octal number. */

    case '1': case '2': case '3': case '4': case '5':
    case '6': case '7': case '8': case '9':

    if (!isclass)
      {
      oldptr = ptr;
      c -= '0';
      while ((digitab[ptr[1]] & ctype_digit) != 0)
        c = c * 10 + *(++ptr) - '0';
      if (c < 10 || c <= bracount)
        {
        c = -(ESC_REF + c);
        break;
        }
      ptr = oldptr;      /* Put the pointer back and fall through */
      }

    /* Handle an octal number following \. If the first digit is 8 or 9, Perl
    generates a binary zero byte and treats the digit as a following literal.
    Thus we have to pull back the pointer by one. */

    if ((c = *ptr) >= '8')
      {
      ptr--;
      c = 0;
      break;
      }

    /* \0 always starts an octal number, but we may drop through to here with a
    larger first octal digit. */

    case '0':
    c -= '0';
    while(i++ < 2 && ptr[1] >= '0' && ptr[1] <= '7')
        c = c * 8 + *(++ptr) - '0';
    c &= 255;     /* Take least significant 8 bits */
    break;

    /* \x is complicated when UTF-8 is enabled. \x{ddd} is a character number
    which can be greater than 0xff, but only if the ddd are hex digits. */

    case 'x':
#ifdef SUPPORT_UTF8
    if (ptr[1] == '{' && (options & PCRE_UTF8) != 0)
      {
      const uschar *pt = ptr + 2;
      register int count = 0;
      c = 0;
      while ((digitab[*pt] & ctype_xdigit) != 0)
        {
        int cc = *pt++;
        count++;
#if !EBCDIC    /* ASCII coding */
        if (cc >= 'a') cc -= 32;               /* Convert to upper case */
        c = c * 16 + cc - ((cc < 'A')? '0' : ('A' - 10));
#else          /* EBCDIC coding */
        if (cc >= 'a' && cc <= 'z') cc += 64;  /* Convert to upper case */
        c = c * 16 + cc - ((cc >= '0')? '0' : ('A' - 10));
#endif
        }
      if (*pt == '}')
        {
        if (c < 0 || count > 8) *errorptr = ERR34;
        ptr = pt;
        break;
        }
      /* If the sequence of hex digits does not end with '}', then we don't
      recognize this construct; fall through to the normal \x handling. */
      }
#endif

    /* Read just a single hex char */

    c = 0;
    while (i++ < 2 && (digitab[ptr[1]] & ctype_xdigit) != 0)
      {
      int cc;                               /* Some compilers don't like ++ */
      cc = *(++ptr);                        /* in initializers */
#if !EBCDIC    /* ASCII coding */
      if (cc >= 'a') cc -= 32;              /* Convert to upper case */
      c = c * 16 + cc - ((cc < 'A')? '0' : ('A' - 10));
#else          /* EBCDIC coding */
      if (cc <= 'z') cc += 64;              /* Convert to upper case */
      c = c * 16 + cc - ((cc >= '0')? '0' : ('A' - 10));
#endif
      }
    break;

    /* Other special escapes not starting with a digit are straightforward */

    case 'c':
    c = *(++ptr);
    if (c == 0)
      {
      *errorptr = ERR2;
      return 0;
      }

    /* A letter is upper-cased; then the 0x40 bit is flipped. This coding
    is ASCII-specific, but then the whole concept of \cx is ASCII-specific.
    (However, an EBCDIC equivalent has now been added.) */

#if !EBCDIC    /* ASCII coding */
    if (c >= 'a' && c <= 'z') c -= 32;
    c ^= 0x40;
#else          /* EBCDIC coding */
    if (c >= 'a' && c <= 'z') c += 64;
    c ^= 0xC0;
#endif
    break;

    /* PCRE_EXTRA enables extensions to Perl in the matter of escapes. Any
    other alphameric following \ is an error if PCRE_EXTRA was set; otherwise,
    for Perl compatibility, it is a literal. This code looks a bit odd, but
    there used to be some cases other than the default, and there may be again
    in future, so I haven't "optimized" it. */

    default:
    if ((options & PCRE_EXTRA) != 0) switch(c)
      {
      default:
      *errorptr = ERR3;
      break;
      }
    break;
    }
  }

*ptrptr = ptr;
return c;
}


#ifdef SUPPORT_UCP
/*************************************************
*               Handle \P and \p                 *
*************************************************/

/* This function is called after \P or \p has been encountered, provided that
PCRE is compiled with support for Unicode properties. On entry, ptrptr is
pointing at the P or p. On exit, it is pointing at the final character of the
escape sequence.

Argument:
  ptrptr     points to the pattern position pointer
  negptr     points to a boolean that is set TRUE for negation else FALSE
  errorptr   points to the pointer to the error message

Returns:     value from ucp_type_table, or -1 for an invalid type
*/

static int
get_ucp(const uschar **ptrptr, BOOL *negptr, const char **errorptr)
{
int c, i, bot, top;
const uschar *ptr = *ptrptr;
char name[4];

c = *(++ptr);
if (c == 0) goto ERROR_RETURN;

*negptr = FALSE;

/* \P or \p can be followed by a one- or two-character name in {}, optionally
preceded by ^ for negation. */

if (c == '{')
  {
  if (ptr[1] == '^')
    {
    *negptr = TRUE;
    ptr++;
    }
  for (i = 0; i <= 2; i++)
    {
    c = *(++ptr);
    if (c == 0) goto ERROR_RETURN;
    if (c == '}') break;
    name[i] = c;
    }
  if (c !='}')   /* Try to distinguish error cases */
    {
    while (*(++ptr) != 0 && *ptr != '}');
    if (*ptr == '}') goto UNKNOWN_RETURN; else goto ERROR_RETURN;
    }
  name[i] = 0;
  }

/* Otherwise there is just one following character */

else
  {
  name[0] = c;
  name[1] = 0;
  }

*ptrptr = ptr;

/* Search for a recognized property name using binary chop */

bot = 0;
top = sizeof(utt)/sizeof(ucp_type_table);

while (bot < top)
  {
  i = (bot + top)/2;
  c = strcmp(name, utt[i].name);
  if (c == 0) return utt[i].value;
  if (c > 0) bot = i + 1; else top = i;
  }

UNKNOWN_RETURN:
*errorptr = ERR47;
*ptrptr = ptr;
return -1;

ERROR_RETURN:
*errorptr = ERR46;
*ptrptr = ptr;
return -1;
}
#endif


/*************************************************
*            Check for counted repeat            *
*************************************************/

/* This function is called when a '{' is encountered in a place where it might
start a quantifier. It looks ahead to see if it really is a quantifier or not.
It is only a quantifier if it is one of the forms {ddd} {ddd,} or {ddd,ddd}
where the ddds are digits.

Arguments:
  p         pointer to the first char after '{'

Returns:    TRUE or FALSE
*/

static BOOL
is_counted_repeat(const uschar *p)
{
if ((digitab[*p++] & ctype_digit) == 0) return FALSE;
while ((digitab[*p] & ctype_digit) != 0) p++;
if (*p == '}') return TRUE;

if (*p++ != ',') return FALSE;
if (*p == '}') return TRUE;

if ((digitab[*p++] & ctype_digit) == 0) return FALSE;
while ((digitab[*p] & ctype_digit) != 0) p++;

return (*p == '}');
}


/*************************************************
*         Read repeat counts                     *
*************************************************/

/* Read an item of the form {n,m} and return the values. This is called only
after is_counted_repeat() has confirmed that a repeat-count quantifier exists,
so the syntax is guaranteed to be correct, but we need to check the values.

Arguments:
  p          pointer to first char after '{'
  minp       pointer to int for min
  maxp       pointer to int for max
             returned as -1 if no max
  errorptr   points to pointer to error message

Returns:     pointer to '}' on success;
             current ptr on error, with errorptr set
*/

static const uschar *
read_repeat_counts(const uschar *p, int *minp, int *maxp, const char **errorptr)
{
int min = 0;
int max = -1;

while ((digitab[*p] & ctype_digit) != 0) min = min * 10 + *p++ - '0';

if (*p == '}') max = min; else
  {
  if (*(++p) != '}')
    {
    max = 0;
    while((digitab[*p] & ctype_digit) != 0) max = max * 10 + *p++ - '0';
    if (max < min)
      {
      *errorptr = ERR4;
      return p;
      }
    }
  }

/* Do paranoid checks, then fill in the required variables, and pass back the
pointer to the terminating '}'. */

if (min > 65535 || max > 65535)
  *errorptr = ERR5;
else
  {
  *minp = min;
  *maxp = max;
  }
return p;
}


/*************************************************
*      Find first significant op code            *
*************************************************/

/* This is called by several functions that scan a compiled expression looking
for a fixed first character, or an anchoring op code etc. It skips over things
that do not influence this. For some calls, a change of option is important.
For some calls, it makes sense to skip negative forward and all backward
assertions, and also the \b assertion; for others it does not.

Arguments:
  code         pointer to the start of the group
  options      pointer to external options
  optbit       the option bit whose changing is significant, or
                 zero if none are
  skipassert   TRUE if certain assertions are to be skipped

Returns:       pointer to the first significant opcode
*/

static const uschar*
first_significant_code(const uschar *code, int *options, int optbit,
  BOOL skipassert)
{
for (;;)
  {
  switch ((int)*code)
    {
    case OP_OPT:
    if (optbit > 0 && ((int)code[1] & optbit) != (*options & optbit))
      *options = (int)code[1];
    code += 2;
    break;

    case OP_ASSERT_NOT:
    case OP_ASSERTBACK:
    case OP_ASSERTBACK_NOT:
    if (!skipassert) return code;
    do code += GET(code, 1); while (*code == OP_ALT);
    code += OP_lengths[*code];
    break;

    case OP_WORD_BOUNDARY:
    case OP_NOT_WORD_BOUNDARY:
    if (!skipassert) return code;
    /* Fall through */

    case OP_CALLOUT:
    case OP_CREF:
    case OP_BRANUMBER:
    code += OP_lengths[*code];
    break;

    default:
    return code;
    }
  }
/* Control never reaches here */
}


/*************************************************
*        Find the fixed length of a pattern      *
*************************************************/

/* Scan a pattern and compute the fixed length of subject that will match it,
if the length is fixed. This is needed for dealing with backward assertions.
In UTF8 mode, the result is in characters rather than bytes.

Arguments:
  code     points to the start of the pattern (the bracket)
  options  the compiling options

Returns:   the fixed length, or -1 if there is no fixed length,
             or -2 if \C was encountered
*/

static int
find_fixedlength(uschar *code, int options)
{
int length = -1;

register int branchlength = 0;
register uschar *cc = code + 1 + LINK_SIZE;

/* Scan along the opcodes for this branch. If we get to the end of the
branch, check the length against that of the other branches. */

for (;;)
  {
  int d;
  register int op = *cc;
  if (op >= OP_BRA) op = OP_BRA;

  switch (op)
    {
    case OP_BRA:
    case OP_ONCE:
    case OP_COND:
    d = find_fixedlength(cc, options);
    if (d < 0) return d;
    branchlength += d;
    do cc += GET(cc, 1); while (*cc == OP_ALT);
    cc += 1 + LINK_SIZE;
    break;

    /* Reached end of a branch; if it's a ket it is the end of a nested
    call. If it's ALT it is an alternation in a nested call. If it is
    END it's the end of the outer call. All can be handled by the same code. */

    case OP_ALT:
    case OP_KET:
    case OP_KETRMAX:
    case OP_KETRMIN:
    case OP_END:
    if (length < 0) length = branchlength;
      else if (length != branchlength) return -1;
    if (*cc != OP_ALT) return length;
    cc += 1 + LINK_SIZE;
    branchlength = 0;
    break;

    /* Skip over assertive subpatterns */

    case OP_ASSERT:
    case OP_ASSERT_NOT:
    case OP_ASSERTBACK:
    case OP_ASSERTBACK_NOT:
    do cc += GET(cc, 1); while (*cc == OP_ALT);
    /* Fall through */

    /* Skip over things that don't match chars */

    case OP_REVERSE:
    case OP_BRANUMBER:
    case OP_CREF:
    case OP_OPT:
    case OP_CALLOUT:
    case OP_SOD:
    case OP_SOM:
    case OP_EOD:
    case OP_EODN:
    case OP_CIRC:
    case OP_DOLL:
    case OP_NOT_WORD_BOUNDARY:
    case OP_WORD_BOUNDARY:
    cc += OP_lengths[*cc];
    break;

    /* Handle literal characters */

    case OP_CHAR:
    case OP_CHARNC:
    branchlength++;
    cc += 2;
#ifdef SUPPORT_UTF8
    if ((options & PCRE_UTF8) != 0)
      {
      while ((*cc & 0xc0) == 0x80) cc++;
      }
#endif
    break;

    /* Handle exact repetitions. The count is already in characters, but we
    need to skip over a multibyte character in UTF8 mode.  */

    case OP_EXACT:
    branchlength += GET2(cc,1);
    cc += 4;
#ifdef SUPPORT_UTF8
    if ((options & PCRE_UTF8) != 0)
      {
      while((*cc & 0x80) == 0x80) cc++;
      }
#endif
    break;

    case OP_TYPEEXACT:
    branchlength += GET2(cc,1);
    cc += 4;
    break;

    /* Handle single-char matchers */

    case OP_PROP:
    case OP_NOTPROP:
    cc++;
    /* Fall through */

    case OP_NOT_DIGIT:
    case OP_DIGIT:
    case OP_NOT_WHITESPACE:
    case OP_WHITESPACE:
    case OP_NOT_WORDCHAR:
    case OP_WORDCHAR:
    case OP_ANY:
    branchlength++;
    cc++;
    break;

    /* The single-byte matcher isn't allowed */

    case OP_ANYBYTE:
    return -2;

    /* Check a class for variable quantification */

#ifdef SUPPORT_UTF8
    case OP_XCLASS:
    cc += GET(cc, 1) - 33;
    /* Fall through */
#endif

    case OP_CLASS:
    case OP_NCLASS:
    cc += 33;

    switch (*cc)
      {
      case OP_CRSTAR:
      case OP_CRMINSTAR:
      case OP_CRQUERY:
      case OP_CRMINQUERY:
      return -1;

      case OP_CRRANGE:
      case OP_CRMINRANGE:
      if (GET2(cc,1) != GET2(cc,3)) return -1;
      branchlength += GET2(cc,1);
      cc += 5;
      break;

      default:
      branchlength++;
      }
    break;

    /* Anything else is variable length */

    default:
    return -1;
    }
  }
/* Control never gets here */
}


/*************************************************
*    Scan compiled regex for numbered bracket    *
*************************************************/

/* This little function scans through a compiled pattern until it finds a
capturing bracket with the given number.

Arguments:
  code        points to start of expression
  utf8        TRUE in UTF-8 mode
  number      the required bracket number

Returns:      pointer to the opcode for the bracket, or NULL if not found
*/

static const uschar *
find_bracket(const uschar *code, BOOL utf8, int number)
{
#ifndef SUPPORT_UTF8
utf8 = utf8;               /* Stop pedantic compilers complaining */
#endif

for (;;)
  {
  register int c = *code;
  if (c == OP_END) return NULL;
  else if (c > OP_BRA)
    {
    int n = c - OP_BRA;
    if (n > EXTRACT_BASIC_MAX) n = GET2(code, 2+LINK_SIZE);
    if (n == number) return (uschar *)code;
    code += OP_lengths[OP_BRA];
    }
  else
    {
    code += OP_lengths[c];

#ifdef SUPPORT_UTF8

    /* In UTF-8 mode, opcodes that are followed by a character may be followed
    by a multi-byte character. The length in the table is a minimum, so we have
    to scan along to skip the extra bytes. All opcodes are less than 128, so we
    can use relatively efficient code. */

    if (utf8) switch(c)
      {
      case OP_CHAR:
      case OP_CHARNC:
      case OP_EXACT:
      case OP_UPTO:
      case OP_MINUPTO:
      case OP_STAR:
      case OP_MINSTAR:
      case OP_PLUS:
      case OP_MINPLUS:
      case OP_QUERY:
      case OP_MINQUERY:
      while ((*code & 0xc0) == 0x80) code++;
      break;

      /* XCLASS is used for classes that cannot be represented just by a bit
      map. This includes negated single high-valued characters. The length in
      the table is zero; the actual length is stored in the compiled code. */

      case OP_XCLASS:
      code += GET(code, 1) + 1;
      break;
      }
#endif
    }
  }
}


/*************************************************
*   Scan compiled regex for recursion reference  *
*************************************************/

/* This little function scans through a compiled pattern until it finds an
instance of OP_RECURSE.

Arguments:
  code        points to start of expression
  utf8        TRUE in UTF-8 mode

Returns:      pointer to the opcode for OP_RECURSE, or NULL if not found
*/

static const uschar *
find_recurse(const uschar *code, BOOL utf8)
{
#ifndef SUPPORT_UTF8
utf8 = utf8;               /* Stop pedantic compilers complaining */
#endif

for (;;)
  {
  register int c = *code;
  if (c == OP_END) return NULL;
  else if (c == OP_RECURSE) return code;
  else if (c > OP_BRA)
    {
    code += OP_lengths[OP_BRA];
    }
  else
    {
    code += OP_lengths[c];

#ifdef SUPPORT_UTF8

    /* In UTF-8 mode, opcodes that are followed by a character may be followed
    by a multi-byte character. The length in the table is a minimum, so we have
    to scan along to skip the extra bytes. All opcodes are less than 128, so we
    can use relatively efficient code. */

    if (utf8) switch(c)
      {
      case OP_CHAR:
      case OP_CHARNC:
      case OP_EXACT:
      case OP_UPTO:
      case OP_MINUPTO:
      case OP_STAR:
      case OP_MINSTAR:
      case OP_PLUS:
      case OP_MINPLUS:
      case OP_QUERY:
      case OP_MINQUERY:
      while ((*code & 0xc0) == 0x80) code++;
      break;

      /* XCLASS is used for classes that cannot be represented just by a bit
      map. This includes negated single high-valued characters. The length in
      the table is zero; the actual length is stored in the compiled code. */

      case OP_XCLASS:
      code += GET(code, 1) + 1;
      break;
      }
#endif
    }
  }
}


/*************************************************
*    Scan compiled branch for non-emptiness      *
*************************************************/

/* This function scans through a branch of a compiled pattern to see whether it
can match the empty string or not. It is called only from could_be_empty()
below. Note that first_significant_code() skips over assertions. If we hit an
unclosed bracket, we return "empty" - this means we've struck an inner bracket
whose current branch will already have been scanned.

Arguments:
  code        points to start of search
  endcode     points to where to stop
  utf8        TRUE if in UTF8 mode

Returns:      TRUE if what is matched could be empty
*/

static BOOL
could_be_empty_branch(const uschar *code, const uschar *endcode, BOOL utf8)
{
register int c;
for (code = first_significant_code(code + 1 + LINK_SIZE, NULL, 0, TRUE);
     code < endcode;
     code = first_significant_code(code + OP_lengths[c], NULL, 0, TRUE))
  {
  const uschar *ccode;

  c = *code;

  if (c >= OP_BRA)
    {
    BOOL empty_branch;
    if (GET(code, 1) == 0) return TRUE;    /* Hit unclosed bracket */

    /* Scan a closed bracket */

    empty_branch = FALSE;
    do
      {
      if (!empty_branch && could_be_empty_branch(code, endcode, utf8))
        empty_branch = TRUE;
      code += GET(code, 1);
      }
    while (*code == OP_ALT);
    if (!empty_branch) return FALSE;   /* All branches are non-empty */
    code += 1 + LINK_SIZE;
    c = *code;
    }

  else switch (c)
    {
    /* Check for quantifiers after a class */

#ifdef SUPPORT_UTF8
    case OP_XCLASS:
    ccode = code + GET(code, 1);
    goto CHECK_CLASS_REPEAT;
#endif

    case OP_CLASS:
    case OP_NCLASS:
    ccode = code + 33;

#ifdef SUPPORT_UTF8
    CHECK_CLASS_REPEAT:
#endif

    switch (*ccode)
      {
      case OP_CRSTAR:            /* These could be empty; continue */
      case OP_CRMINSTAR:
      case OP_CRQUERY:
      case OP_CRMINQUERY:
      break;

      default:                   /* Non-repeat => class must match */
      case OP_CRPLUS:            /* These repeats aren't empty */
      case OP_CRMINPLUS:
      return FALSE;

      case OP_CRRANGE:
      case OP_CRMINRANGE:
      if (GET2(ccode, 1) > 0) return FALSE;  /* Minimum > 0 */
      break;
      }
    break;

    /* Opcodes that must match a character */

    case OP_PROP:
    case OP_NOTPROP:
    case OP_EXTUNI:
    case OP_NOT_DIGIT:
    case OP_DIGIT:
    case OP_NOT_WHITESPACE:
    case OP_WHITESPACE:
    case OP_NOT_WORDCHAR:
    case OP_WORDCHAR:
    case OP_ANY:
    case OP_ANYBYTE:
    case OP_CHAR:
    case OP_CHARNC:
    case OP_NOT:
    case OP_PLUS:
    case OP_MINPLUS:
    case OP_EXACT:
    case OP_NOTPLUS:
    case OP_NOTMINPLUS:
    case OP_NOTEXACT:
    case OP_TYPEPLUS:
    case OP_TYPEMINPLUS:
    case OP_TYPEEXACT:
    return FALSE;

    /* End of branch */

    case OP_KET:
    case OP_KETRMAX:
    case OP_KETRMIN:
    case OP_ALT:
    return TRUE;

    /* In UTF-8 mode, STAR, MINSTAR, QUERY, MINQUERY, UPTO, and MINUPTO  may be
    followed by a multibyte character */

#ifdef SUPPORT_UTF8
    case OP_STAR:
    case OP_MINSTAR:
    case OP_QUERY:
    case OP_MINQUERY:
    case OP_UPTO:
    case OP_MINUPTO:
    if (utf8) while ((code[2] & 0xc0) == 0x80) code++;
    break;
#endif
    }
  }

return TRUE;
}


/*************************************************
*    Scan compiled regex for non-emptiness       *
*************************************************/

/* This function is called to check for left recursive calls. We want to check
the current branch of the current pattern to see if it could match the empty
string. If it could, we must look outwards for branches at other levels,
stopping when we pass beyond the bracket which is the subject of the recursion.

Arguments:
  code        points to start of the recursion
  endcode     points to where to stop (current RECURSE item)
  bcptr       points to the chain of current (unclosed) branch starts
  utf8        TRUE if in UTF-8 mode

Returns:      TRUE if what is matched could be empty
*/

static BOOL
could_be_empty(const uschar *code, const uschar *endcode, branch_chain *bcptr,
  BOOL utf8)
{
while (bcptr != NULL && bcptr->current >= code)
  {
  if (!could_be_empty_branch(bcptr->current, endcode, utf8)) return FALSE;
  bcptr = bcptr->outer;
  }
return TRUE;
}


/*************************************************
*           Check for POSIX class syntax         *
*************************************************/

/* This function is called when the sequence "[:" or "[." or "[=" is
encountered in a character class. It checks whether this is followed by an
optional ^ and then a sequence of letters, terminated by a matching ":]" or
".]" or "=]".

Argument:
  ptr      pointer to the initial [
  endptr   where to return the end pointer
  cd       pointer to compile data

Returns:   TRUE or FALSE
*/

static BOOL
check_posix_syntax(const uschar *ptr, const uschar **endptr, compile_data *cd)
{
int terminator;          /* Don't combine these lines; the Solaris cc */
terminator = *(++ptr);   /* compiler warns about "non-constant" initializer. */
if (*(++ptr) == '^') ptr++;
while ((cd->ctypes[*ptr] & ctype_letter) != 0) ptr++;
if (*ptr == terminator && ptr[1] == ']')
  {
  *endptr = ptr;
  return TRUE;
  }
return FALSE;
}


/*************************************************
*          Check POSIX class name                *
*************************************************/

/* This function is called to check the name given in a POSIX-style class entry
such as [:alnum:].

Arguments:
  ptr        points to the first letter
  len        the length of the name

Returns:     a value representing the name, or -1 if unknown
*/

static int
check_posix_name(const uschar *ptr, int len)
{
register int yield = 0;
while (posix_name_lengths[yield] != 0)
  {
  if (len == posix_name_lengths[yield] &&
    strncmp((const char *)ptr, posix_names[yield], len) == 0) return yield;
  yield++;
  }
return -1;
}


/*************************************************
*    Adjust OP_RECURSE items in repeated group   *
*************************************************/

/* OP_RECURSE items contain an offset from the start of the regex to the group
that is referenced. This means that groups can be replicated for fixed
repetition simply by copying (because the recursion is allowed to refer to
earlier groups that are outside the current group). However, when a group is
optional (i.e. the minimum quantifier is zero), OP_BRAZERO is inserted before
it, after it has been compiled. This means that any OP_RECURSE items within it
that refer to the group itself or any contained groups have to have their
offsets adjusted. That is the job of this function. Before it is called, the
partially compiled regex must be temporarily terminated with OP_END.

Arguments:
  group      points to the start of the group
  adjust     the amount by which the group is to be moved
  utf8       TRUE in UTF-8 mode
  cd         contains pointers to tables etc.

Returns:     nothing
*/

static void
adjust_recurse(uschar *group, int adjust, BOOL utf8, compile_data *cd)
{
uschar *ptr = group;
while ((ptr = (uschar *)find_recurse(ptr, utf8)) != NULL)
  {
  int offset = GET(ptr, 1);
  if (cd->start_code + offset >= group) PUT(ptr, 1, offset + adjust);
  ptr += 1 + LINK_SIZE;
  }
}


/*************************************************
*        Insert an automatic callout point       *
*************************************************/

/* This function is called when the PCRE_AUTO_CALLOUT option is set, to insert
callout points before each pattern item.

Arguments:
  code           current code pointer
  ptr            current pattern pointer
  cd             pointers to tables etc

Returns:         new code pointer
*/

static uschar *
auto_callout(uschar *code, const uschar *ptr, compile_data *cd)
{
*code++ = OP_CALLOUT;
*code++ = 255;
PUT(code, 0, ptr - cd->start_pattern);  /* Pattern offset */
PUT(code, LINK_SIZE, 0);                /* Default length */
return code + 2*LINK_SIZE;
}


/*************************************************
*         Complete a callout item                *
*************************************************/

/* A callout item contains the length of the next item in the pattern, which
we can't fill in till after we have reached the relevant point. This is used
for both automatic and manual callouts.

Arguments:
  previous_callout   points to previous callout item
  ptr                current pattern pointer
  cd                 pointers to tables etc

Returns:             nothing
*/

static void
complete_callout(uschar *previous_callout, const uschar *ptr, compile_data *cd)
{
int length = ptr - cd->start_pattern - GET(previous_callout, 2);
PUT(previous_callout, 2 + LINK_SIZE, length);
}


#ifdef SUPPORT_UCP
/*************************************************
*           Get othercase range                  *
*************************************************/

/* This function is passed the start and end of a class range, in UTF-8 mode
with UCP support. It searches up the characters, looking for internal ranges of
characters in the "other" case. Each call returns the next one, updating the
start address.

Arguments:
  cptr        points to starting character value; updated
  d           end value
  ocptr       where to put start of othercase range
  odptr       where to put end of othercase range

Yield:        TRUE when range returned; FALSE when no more
*/

static BOOL
get_othercase_range(int *cptr, int d, int *ocptr, int *odptr)
{
int c, chartype, othercase, next;

for (c = *cptr; c <= d; c++)
  {
  if (ucp_findchar(c, &chartype, &othercase) == ucp_L && othercase != 0) break;
  }

if (c > d) return FALSE;

*ocptr = othercase;
next = othercase + 1;

for (++c; c <= d; c++)
  {
  if (ucp_findchar(c, &chartype, &othercase) != ucp_L || othercase != next)
    break;
  next++;
  }

*odptr = next - 1;
*cptr = c;

return TRUE;
}
#endif  /* SUPPORT_UCP */


/*************************************************
*           Compile one branch                   *
*************************************************/

/* Scan the pattern, compiling it into the code vector. If the options are
changed during the branch, the pointer is used to change the external options
bits.

Arguments:
  optionsptr     pointer to the option bits
  brackets       points to number of extracting brackets used
  codeptr        points to the pointer to the current code point
  ptrptr         points to the current pattern pointer
  errorptr       points to pointer to error message
  firstbyteptr   set to initial literal character, or < 0 (REQ_UNSET, REQ_NONE)
  reqbyteptr     set to the last literal character required, else < 0
  bcptr          points to current branch chain
  cd             contains pointers to tables etc.

Returns:         TRUE on success
                 FALSE, with *errorptr set on error
*/

static BOOL
compile_branch(int *optionsptr, int *brackets, uschar **codeptr,
  const uschar **ptrptr, const char **errorptr, int *firstbyteptr,
  int *reqbyteptr, branch_chain *bcptr, compile_data *cd)
{
int repeat_type, op_type;
int repeat_min = 0, repeat_max = 0;      /* To please picky compilers */
int bravalue = 0;
int greedy_default, greedy_non_default;
int firstbyte, reqbyte;
int zeroreqbyte, zerofirstbyte;
int req_caseopt, reqvary, tempreqvary;
int condcount = 0;
int options = *optionsptr;
int after_manual_callout = 0;
register int c;
register uschar *code = *codeptr;
uschar *tempcode;
BOOL inescq = FALSE;
BOOL groupsetfirstbyte = FALSE;
const uschar *ptr = *ptrptr;
const uschar *tempptr;
uschar *previous = NULL;
uschar *previous_callout = NULL;
uschar classbits[32];

#ifdef SUPPORT_UTF8
BOOL class_utf8;
BOOL utf8 = (options & PCRE_UTF8) != 0;
uschar *class_utf8data;
uschar utf8_char[6];
#else
BOOL utf8 = FALSE;
#endif

/* Set up the default and non-default settings for greediness */

greedy_default = ((options & PCRE_UNGREEDY) != 0);
greedy_non_default = greedy_default ^ 1;

/* Initialize no first byte, no required byte. REQ_UNSET means "no char
matching encountered yet". It gets changed to REQ_NONE if we hit something that
matches a non-fixed char first char; reqbyte just remains unset if we never
find one.

When we hit a repeat whose minimum is zero, we may have to adjust these values
to take the zero repeat into account. This is implemented by setting them to
zerofirstbyte and zeroreqbyte when such a repeat is encountered. The individual
item types that can be repeated set these backoff variables appropriately. */

firstbyte = reqbyte = zerofirstbyte = zeroreqbyte = REQ_UNSET;

/* The variable req_caseopt contains either the REQ_CASELESS value or zero,
according to the current setting of the caseless flag. REQ_CASELESS is a bit
value > 255. It is added into the firstbyte or reqbyte variables to record the
case status of the value. This is used only for ASCII characters. */

req_caseopt = ((options & PCRE_CASELESS) != 0)? REQ_CASELESS : 0;

/* Switch on next character until the end of the branch */

for (;; ptr++)
  {
  BOOL negate_class;
  BOOL possessive_quantifier;
  BOOL is_quantifier;
  int class_charcount;
  int class_lastchar;
  int newoptions;
  int recno;
  int skipbytes;
  int subreqbyte;
  int subfirstbyte;
  int mclength;
  uschar mcbuffer[8];

  /* Next byte in the pattern */

  c = *ptr;

  /* If in \Q...\E, check for the end; if not, we have a literal */

  if (inescq && c != 0)
    {
    if (c == '\\' && ptr[1] == 'E')
      {
      inescq = FALSE;
      ptr++;
      continue;
      }
    else
      {
      if (previous_callout != NULL)
        {
        complete_callout(previous_callout, ptr, cd);
        previous_callout = NULL;
        }
      if ((options & PCRE_AUTO_CALLOUT) != 0)
        {
        previous_callout = code;
        code = auto_callout(code, ptr, cd);
        }
      goto NORMAL_CHAR;
      }
    }

  /* Fill in length of a previous callout, except when the next thing is
  a quantifier. */

  is_quantifier = c == '*' || c == '+' || c == '?' ||
    (c == '{' && is_counted_repeat(ptr+1));

  if (!is_quantifier && previous_callout != NULL &&
       after_manual_callout-- <= 0)
    {
    complete_callout(previous_callout, ptr, cd);
    previous_callout = NULL;
    }

  /* In extended mode, skip white space and comments */

  if ((options & PCRE_EXTENDED) != 0)
    {
    if ((cd->ctypes[c] & ctype_space) != 0) continue;
    if (c == '#')
      {
      /* The space before the ; is to avoid a warning on a silly compiler
      on the Macintosh. */
      while ((c = *(++ptr)) != 0 && c != NEWLINE) ;
      if (c != 0) continue;   /* Else fall through to handle end of string */
      }
    }

  /* No auto callout for quantifiers. */

  if ((options & PCRE_AUTO_CALLOUT) != 0 && !is_quantifier)
    {
    previous_callout = code;
    code = auto_callout(code, ptr, cd);
    }

  switch(c)
    {
    /* The branch terminates at end of string, |, or ). */

    case 0:
    case '|':
    case ')':
    *firstbyteptr = firstbyte;
    *reqbyteptr = reqbyte;
    *codeptr = code;
    *ptrptr = ptr;
    return TRUE;

    /* Handle single-character metacharacters. In multiline mode, ^ disables
    the setting of any following char as a first character. */

    case '^':
    if ((options & PCRE_MULTILINE) != 0)
      {
      if (firstbyte == REQ_UNSET) firstbyte = REQ_NONE;
      }
    previous = NULL;
    *code++ = OP_CIRC;
    break;

    case '$':
    previous = NULL;
    *code++ = OP_DOLL;
    break;

    /* There can never be a first char if '.' is first, whatever happens about
    repeats. The value of reqbyte doesn't change either. */

    case '.':
    if (firstbyte == REQ_UNSET) firstbyte = REQ_NONE;
    zerofirstbyte = firstbyte;
    zeroreqbyte = reqbyte;
    previous = code;
    *code++ = OP_ANY;
    break;

    /* Character classes. If the included characters are all < 255 in value, we
    build a 32-byte bitmap of the permitted characters, except in the special
    case where there is only one such character. For negated classes, we build
    the map as usual, then invert it at the end. However, we use a different
    opcode so that data characters > 255 can be handled correctly.

    If the class contains characters outside the 0-255 range, a different
    opcode is compiled. It may optionally have a bit map for characters < 256,
    but those above are are explicitly listed afterwards. A flag byte tells
    whether the bitmap is present, and whether this is a negated class or not.
    */

    case '[':
    previous = code;

    /* PCRE supports POSIX class stuff inside a class. Perl gives an error if
    they are encountered at the top level, so we'll do that too. */

    if ((ptr[1] == ':' || ptr[1] == '.' || ptr[1] == '=') &&
        check_posix_syntax(ptr, &tempptr, cd))
      {
      *errorptr = (ptr[1] == ':')? ERR13 : ERR31;
      goto FAILED;
      }

    /* If the first character is '^', set the negation flag and skip it. */

    if ((c = *(++ptr)) == '^')
      {
      negate_class = TRUE;
      c = *(++ptr);
      }
    else
      {
      negate_class = FALSE;
      }

    /* Keep a count of chars with values < 256 so that we can optimize the case
    of just a single character (as long as it's < 256). For higher valued UTF-8
    characters, we don't yet do any optimization. */

    class_charcount = 0;
    class_lastchar = -1;

#ifdef SUPPORT_UTF8
    class_utf8 = FALSE;                       /* No chars >= 256 */
    class_utf8data = code + LINK_SIZE + 34;   /* For UTF-8 items */
#endif

    /* Initialize the 32-char bit map to all zeros. We have to build the
    map in a temporary bit of store, in case the class contains only 1
    character (< 256), because in that case the compiled code doesn't use the
    bit map. */

    memset(classbits, 0, 32 * sizeof(uschar));

    /* Process characters until ] is reached. By writing this as a "do" it
    means that an initial ] is taken as a data character. The first pass
    through the regex checked the overall syntax, so we don't need to be very
    strict here. At the start of the loop, c contains the first byte of the
    character. */

    do
      {
#ifdef SUPPORT_UTF8
      if (utf8 && c > 127)
        {                           /* Braces are required because the */
        GETCHARLEN(c, ptr, ptr);    /* macro generates multiple statements */
        }
#endif

      /* Inside \Q...\E everything is literal except \E */

      if (inescq)
        {
        if (c == '\\' && ptr[1] == 'E')
          {
          inescq = FALSE;
          ptr++;
          continue;
          }
        else goto LONE_SINGLE_CHARACTER;
        }

      /* Handle POSIX class names. Perl allows a negation extension of the
      form [:^name:]. A square bracket that doesn't match the syntax is
      treated as a literal. We also recognize the POSIX constructions
      [.ch.] and [=ch=] ("collating elements") and fault them, as Perl
      5.6 and 5.8 do. */

      if (c == '[' &&
          (ptr[1] == ':' || ptr[1] == '.' || ptr[1] == '=') &&
          check_posix_syntax(ptr, &tempptr, cd))
        {
        BOOL local_negate = FALSE;
        int posix_class, i;
        register const uschar *cbits = cd->cbits;

        if (ptr[1] != ':')
          {
          *errorptr = ERR31;
          goto FAILED;
          }

        ptr += 2;
        if (*ptr == '^')
          {
          local_negate = TRUE;
          ptr++;
          }

        posix_class = check_posix_name(ptr, tempptr - ptr);
        if (posix_class < 0)
          {
          *errorptr = ERR30;
          goto FAILED;
          }

        /* If matching is caseless, upper and lower are converted to
        alpha. This relies on the fact that the class table starts with
        alpha, lower, upper as the first 3 entries. */

        if ((options & PCRE_CASELESS) != 0 && posix_class <= 2)
          posix_class = 0;

        /* Or into the map we are building up to 3 of the static class
        tables, or their negations. The [:blank:] class sets up the same
        chars as the [:space:] class (all white space). We remove the vertical
        white space chars afterwards. */

        posix_class *= 3;
        for (i = 0; i < 3; i++)
          {
          BOOL blankclass = strncmp((char *)ptr, "blank", 5) == 0;
          int taboffset = posix_class_maps[posix_class + i];
          if (taboffset < 0) break;
          if (local_negate)
            {
            if (i == 0)
              for (c = 0; c < 32; c++) classbits[c] |= ~cbits[c+taboffset];
            else
              for (c = 0; c < 32; c++) classbits[c] &= ~cbits[c+taboffset];
            if (blankclass) classbits[1] |= 0x3c;
            }
          else
            {
            for (c = 0; c < 32; c++) classbits[c] |= cbits[c+taboffset];
            if (blankclass) classbits[1] &= ~0x3c;
            }
          }

        ptr = tempptr + 1;
        class_charcount = 10;  /* Set > 1; assumes more than 1 per class */
        continue;    /* End of POSIX syntax handling */
        }

      /* Backslash may introduce a single character, or it may introduce one
      of the specials, which just set a flag. Escaped items are checked for
      validity in the pre-compiling pass. The sequence \b is a special case.
      Inside a class (and only there) it is treated as backspace. Elsewhere
      it marks a word boundary. Other escapes have preset maps ready to
      or into the one we are building. We assume they have more than one
      character in them, so set class_charcount bigger than one. */

      if (c == '\\')
        {
        c = check_escape(&ptr, errorptr, *brackets, options, TRUE);

        if (-c == ESC_b) c = '\b';       /* \b is backslash in a class */
        else if (-c == ESC_X) c = 'X';   /* \X is literal X in a class */
        else if (-c == ESC_Q)            /* Handle start of quoted string */
          {
          if (ptr[1] == '\\' && ptr[2] == 'E')
            {
            ptr += 2; /* avoid empty string */
            }
          else inescq = TRUE;
          continue;
          }

        if (c < 0)
          {
          register const uschar *cbits = cd->cbits;
          class_charcount += 2;     /* Greater than 1 is what matters */
          switch (-c)
            {
            case ESC_d:
            for (c = 0; c < 32; c++) classbits[c] |= cbits[c+cbit_digit];
            continue;

            case ESC_D:
            for (c = 0; c < 32; c++) classbits[c] |= ~cbits[c+cbit_digit];
            continue;

            case ESC_w:
            for (c = 0; c < 32; c++) classbits[c] |= cbits[c+cbit_word];
            continue;

            case ESC_W:
            for (c = 0; c < 32; c++) classbits[c] |= ~cbits[c+cbit_word];
            continue;

            case ESC_s:
            for (c = 0; c < 32; c++) classbits[c] |= cbits[c+cbit_space];
            classbits[1] &= ~0x08;   /* Perl 5.004 onwards omits VT from \s */
            continue;

            case ESC_S:
            for (c = 0; c < 32; c++) classbits[c] |= ~cbits[c+cbit_space];
            classbits[1] |= 0x08;    /* Perl 5.004 onwards omits VT from \s */
            continue;

#ifdef SUPPORT_UCP
            case ESC_p:
            case ESC_P:
              {
              BOOL negated;
              int property = get_ucp(&ptr, &negated, errorptr);
              if (property < 0) goto FAILED;
              class_utf8 = TRUE;
              *class_utf8data++ = ((-c == ESC_p) != negated)?
                XCL_PROP : XCL_NOTPROP;
              *class_utf8data++ = property;
              class_charcount -= 2;   /* Not a < 256 character */
              }
            continue;
#endif

            /* Unrecognized escapes are faulted if PCRE is running in its
            strict mode. By default, for compatibility with Perl, they are
            treated as literals. */

            default:
            if ((options & PCRE_EXTRA) != 0)
              {
              *errorptr = ERR7;
              goto FAILED;
              }
            c = *ptr;              /* The final character */
            class_charcount -= 2;  /* Undo the default count from above */
            }
          }

        /* Fall through if we have a single character (c >= 0). This may be
        > 256 in UTF-8 mode. */

        }   /* End of backslash handling */

      /* A single character may be followed by '-' to form a range. However,
      Perl does not permit ']' to be the end of the range. A '-' character
      here is treated as a literal. */

      if (ptr[1] == '-' && ptr[2] != ']')
        {
        int d;
        ptr += 2;

#ifdef SUPPORT_UTF8
        if (utf8)
          {                           /* Braces are required because the */
          GETCHARLEN(d, ptr, ptr);    /* macro generates multiple statements */
          }
        else
#endif
        d = *ptr;  /* Not UTF-8 mode */

        /* The second part of a range can be a single-character escape, but
        not any of the other escapes. Perl 5.6 treats a hyphen as a literal
        in such circumstances. */

        if (d == '\\')
          {
          const uschar *oldptr = ptr;
          d = check_escape(&ptr, errorptr, *brackets, options, TRUE);

          /* \b is backslash; \X is literal X; any other special means the '-'
          was literal */

          if (d < 0)
            {
            if (d == -ESC_b) d = '\b';
            else if (d == -ESC_X) d = 'X'; else
              {
              ptr = oldptr - 2;
              goto LONE_SINGLE_CHARACTER;  /* A few lines below */
              }
            }
          }

        /* The check that the two values are in the correct order happens in
        the pre-pass. Optimize one-character ranges */

        if (d == c) goto LONE_SINGLE_CHARACTER;  /* A few lines below */

        /* In UTF-8 mode, if the upper limit is > 255, or > 127 for caseless
        matching, we have to use an XCLASS with extra data items. Caseless
        matching for characters > 127 is available only if UCP support is
        available. */

#ifdef SUPPORT_UTF8
        if (utf8 && (d > 255 || ((options & PCRE_CASELESS) != 0 && d > 127)))
          {
          class_utf8 = TRUE;

          /* With UCP support, we can find the other case equivalents of
          the relevant characters. There may be several ranges. Optimize how
          they fit with the basic range. */

#ifdef SUPPORT_UCP
          if ((options & PCRE_CASELESS) != 0)
            {
            int occ, ocd;
            int cc = c;
            int origd = d;
            while (get_othercase_range(&cc, origd, &occ, &ocd))
              {
              if (occ >= c && ocd <= d) continue;  /* Skip embedded ranges */

              if (occ < c  && ocd >= c - 1)        /* Extend the basic range */
                {                                  /* if there is overlap,   */
                c = occ;                           /* noting that if occ < c */
                continue;                          /* we can't have ocd > d  */
                }                                  /* because a subrange is  */
              if (ocd > d && occ <= d + 1)         /* always shorter than    */
                {                                  /* the basic range.       */
                d = ocd;
                continue;
                }

              if (occ == ocd)
                {
                *class_utf8data++ = XCL_SINGLE;
                }
              else
                {
                *class_utf8data++ = XCL_RANGE;
                class_utf8data += ord2utf8(occ, class_utf8data);
                }
              class_utf8data += ord2utf8(ocd, class_utf8data);
              }
            }
#endif  /* SUPPORT_UCP */

          /* Now record the original range, possibly modified for UCP caseless
          overlapping ranges. */

          *class_utf8data++ = XCL_RANGE;
          class_utf8data += ord2utf8(c, class_utf8data);
          class_utf8data += ord2utf8(d, class_utf8data);

          /* With UCP support, we are done. Without UCP support, there is no
          caseless matching for UTF-8 characters > 127; we can use the bit map
          for the smaller ones. */

#ifdef SUPPORT_UCP
          continue;    /* With next character in the class */
#else
          if ((options & PCRE_CASELESS) == 0 || c > 127) continue;

          /* Adjust upper limit and fall through to set up the map */

          d = 127;

#endif  /* SUPPORT_UCP */
          }
#endif  /* SUPPORT_UTF8 */

        /* We use the bit map for all cases when not in UTF-8 mode; else
        ranges that lie entirely within 0-127 when there is UCP support; else
        for partial ranges without UCP support. */

        for (; c <= d; c++)
          {
          classbits[c/8] |= (1 << (c&7));
          if ((options & PCRE_CASELESS) != 0)
            {
            int uc = cd->fcc[c];           /* flip case */
            classbits[uc/8] |= (1 << (uc&7));
            }
          class_charcount++;                /* in case a one-char range */
          class_lastchar = c;
          }

        continue;   /* Go get the next char in the class */
        }

      /* Handle a lone single character - we can get here for a normal
      non-escape char, or after \ that introduces a single character or for an
      apparent range that isn't. */

      LONE_SINGLE_CHARACTER:

      /* Handle a character that cannot go in the bit map */

#ifdef SUPPORT_UTF8
      if (utf8 && (c > 255 || ((options & PCRE_CASELESS) != 0 && c > 127)))
        {
        class_utf8 = TRUE;
        *class_utf8data++ = XCL_SINGLE;
        class_utf8data += ord2utf8(c, class_utf8data);

#ifdef SUPPORT_UCP
        if ((options & PCRE_CASELESS) != 0)
          {
          int chartype;
          int othercase;
          if (ucp_findchar(c, &chartype, &othercase) >= 0 && othercase > 0)
            {
            *class_utf8data++ = XCL_SINGLE;
            class_utf8data += ord2utf8(othercase, class_utf8data);
            }
          }
#endif  /* SUPPORT_UCP */

        }
      else
#endif  /* SUPPORT_UTF8 */

      /* Handle a single-byte character */
        {
        classbits[c/8] |= (1 << (c&7));
        if ((options & PCRE_CASELESS) != 0)
          {
          c = cd->fcc[c];   /* flip case */
          classbits[c/8] |= (1 << (c&7));
          }
        class_charcount++;
        class_lastchar = c;
        }
      }

    /* Loop until ']' reached; the check for end of string happens inside the
    loop. This "while" is the end of the "do" above. */

    while ((c = *(++ptr)) != ']' || inescq);

    /* If class_charcount is 1, we saw precisely one character whose value is
    less than 256. In non-UTF-8 mode we can always optimize. In UTF-8 mode, we
    can optimize the negative case only if there were no characters >= 128
    because OP_NOT and the related opcodes like OP_NOTSTAR operate on
    single-bytes only. This is an historical hangover. Maybe one day we can
    tidy these opcodes to handle multi-byte characters.

    The optimization throws away the bit map. We turn the item into a
    1-character OP_CHAR[NC] if it's positive, or OP_NOT if it's negative. Note
    that OP_NOT does not support multibyte characters. In the positive case, it
    can cause firstbyte to be set. Otherwise, there can be no first char if
    this item is first, whatever repeat count may follow. In the case of
    reqbyte, save the previous value for reinstating. */

#ifdef SUPPORT_UTF8
    if (class_charcount == 1 &&
          (!utf8 ||
          (!class_utf8 && (!negate_class || class_lastchar < 128))))

#else
    if (class_charcount == 1)
#endif
      {
      zeroreqbyte = reqbyte;

      /* The OP_NOT opcode works on one-byte characters only. */

      if (negate_class)
        {
        if (firstbyte == REQ_UNSET) firstbyte = REQ_NONE;
        zerofirstbyte = firstbyte;
        *code++ = OP_NOT;
        *code++ = class_lastchar;
        break;
        }

      /* For a single, positive character, get the value into mcbuffer, and
      then we can handle this with the normal one-character code. */

#ifdef SUPPORT_UTF8
      if (utf8 && class_lastchar > 127)
        mclength = ord2utf8(class_lastchar, mcbuffer);
      else
#endif
        {
        mcbuffer[0] = class_lastchar;
        mclength = 1;
        }
      goto ONE_CHAR;
      }       /* End of 1-char optimization */

    /* The general case - not the one-char optimization. If this is the first
    thing in the branch, there can be no first char setting, whatever the
    repeat count. Any reqbyte setting must remain unchanged after any kind of
    repeat. */

    if (firstbyte == REQ_UNSET) firstbyte = REQ_NONE;
    zerofirstbyte = firstbyte;
    zeroreqbyte = reqbyte;

    /* If there are characters with values > 255, we have to compile an
    extended class, with its own opcode. If there are no characters < 256,
    we can omit the bitmap. */

#ifdef SUPPORT_UTF8
    if (class_utf8)
      {
      *class_utf8data++ = XCL_END;    /* Marks the end of extra data */
      *code++ = OP_XCLASS;
      code += LINK_SIZE;
      *code = negate_class? XCL_NOT : 0;

      /* If the map is required, install it, and move on to the end of
      the extra data */

      if (class_charcount > 0)
        {
        *code++ |= XCL_MAP;
        memcpy(code, classbits, 32);
        code = class_utf8data;
        }

      /* If the map is not required, slide down the extra data. */

      else
        {
        int len = class_utf8data - (code + 33);
        memmove(code + 1, code + 33, len);
        code += len + 1;
        }

      /* Now fill in the complete length of the item */

      PUT(previous, 1, code - previous);
      break;   /* End of class handling */
      }
#endif

    /* If there are no characters > 255, negate the 32-byte map if necessary,
    and copy it into the code vector. If this is the first thing in the branch,
    there can be no first char setting, whatever the repeat count. Any reqbyte
    setting must remain unchanged after any kind of repeat. */

    if (negate_class)
      {
      *code++ = OP_NCLASS;
      for (c = 0; c < 32; c++) code[c] = ~classbits[c];
      }
    else
      {
      *code++ = OP_CLASS;
      memcpy(code, classbits, 32);
      }
    code += 32;
    break;

    /* Various kinds of repeat; '{' is not necessarily a quantifier, but this
    has been tested above. */

    case '{':
    if (!is_quantifier) goto NORMAL_CHAR;
    ptr = read_repeat_counts(ptr+1, &repeat_min, &repeat_max, errorptr);
    if (*errorptr != NULL) goto FAILED;
    goto REPEAT;

    case '*':
    repeat_min = 0;
    repeat_max = -1;
    goto REPEAT;

    case '+':
    repeat_min = 1;
    repeat_max = -1;
    goto REPEAT;

    case '?':
    repeat_min = 0;
    repeat_max = 1;

    REPEAT:
    if (previous == NULL)
      {
      *errorptr = ERR9;
      goto FAILED;
      }

    if (repeat_min == 0)
      {
      firstbyte = zerofirstbyte;    /* Adjust for zero repeat */
      reqbyte = zeroreqbyte;        /* Ditto */
      }

    /* Remember whether this is a variable length repeat */

    reqvary = (repeat_min == repeat_max)? 0 : REQ_VARY;

    op_type = 0;                    /* Default single-char op codes */
    possessive_quantifier = FALSE;  /* Default not possessive quantifier */

    /* Save start of previous item, in case we have to move it up to make space
    for an inserted OP_ONCE for the additional '+' extension. */

    tempcode = previous;

    /* If the next character is '+', we have a possessive quantifier. This
    implies greediness, whatever the setting of the PCRE_UNGREEDY option.
    If the next character is '?' this is a minimizing repeat, by default,
    but if PCRE_UNGREEDY is set, it works the other way round. We change the
    repeat type to the non-default. */

    if (ptr[1] == '+')
      {
      repeat_type = 0;                  /* Force greedy */
      possessive_quantifier = TRUE;
      ptr++;
      }
    else if (ptr[1] == '?')
      {
      repeat_type = greedy_non_default;
      ptr++;
      }
    else repeat_type = greedy_default;

    /* If previous was a recursion, we need to wrap it inside brackets so that
    it can be replicated if necessary. */

    if (*previous == OP_RECURSE)
      {
      memmove(previous + 1 + LINK_SIZE, previous, 1 + LINK_SIZE);
      code += 1 + LINK_SIZE;
      *previous = OP_BRA;
      PUT(previous, 1, code - previous);
      *code = OP_KET;
      PUT(code, 1, code - previous);
      code += 1 + LINK_SIZE;
      }

    /* If previous was a character match, abolish the item and generate a
    repeat item instead. If a char item has a minumum of more than one, ensure
    that it is set in reqbyte - it might not be if a sequence such as x{3} is
    the first thing in a branch because the x will have gone into firstbyte
    instead.  */

    if (*previous == OP_CHAR || *previous == OP_CHARNC)
      {
      /* Deal with UTF-8 characters that take up more than one byte. It's
      easier to write this out separately than try to macrify it. Use c to
      hold the length of the character in bytes, plus 0x80 to flag that it's a
      length rather than a small character. */

#ifdef SUPPORT_UTF8
      if (utf8 && (code[-1] & 0x80) != 0)
        {
        uschar *lastchar = code - 1;
        while((*lastchar & 0xc0) == 0x80) lastchar--;
        c = code - lastchar;            /* Length of UTF-8 character */
        memcpy(utf8_char, lastchar, c); /* Save the char */
        c |= 0x80;                      /* Flag c as a length */
        }
      else
#endif

      /* Handle the case of a single byte - either with no UTF8 support, or
      with UTF-8 disabled, or for a UTF-8 character < 128. */

        {
        c = code[-1];
        if (repeat_min > 1) reqbyte = c | req_caseopt | cd->req_varyopt;
        }

      goto OUTPUT_SINGLE_REPEAT;   /* Code shared with single character types */
      }

    /* If previous was a single negated character ([^a] or similar), we use
    one of the special opcodes, replacing it. The code is shared with single-
    character repeats by setting opt_type to add a suitable offset into
    repeat_type. OP_NOT is currently used only for single-byte chars. */

    else if (*previous == OP_NOT)
      {
      op_type = OP_NOTSTAR - OP_STAR;  /* Use "not" opcodes */
      c = previous[1];
      goto OUTPUT_SINGLE_REPEAT;
      }

    /* If previous was a character type match (\d or similar), abolish it and
    create a suitable repeat item. The code is shared with single-character
    repeats by setting op_type to add a suitable offset into repeat_type. Note
    the the Unicode property types will be present only when SUPPORT_UCP is
    defined, but we don't wrap the little bits of code here because it just
    makes it horribly messy. */

    else if (*previous < OP_EODN)
      {
      uschar *oldcode;
      int prop_type;
      op_type = OP_TYPESTAR - OP_STAR;  /* Use type opcodes */
      c = *previous;

      OUTPUT_SINGLE_REPEAT:
      prop_type = (*previous == OP_PROP || *previous == OP_NOTPROP)?
        previous[1] : -1;

      oldcode = code;
      code = previous;                  /* Usually overwrite previous item */

      /* If the maximum is zero then the minimum must also be zero; Perl allows
      this case, so we do too - by simply omitting the item altogether. */

      if (repeat_max == 0) goto END_REPEAT;

      /* All real repeats make it impossible to handle partial matching (maybe
      one day we will be able to remove this restriction). */

      if (repeat_max != 1) cd->nopartial = TRUE;

      /* Combine the op_type with the repeat_type */

      repeat_type += op_type;

      /* A minimum of zero is handled either as the special case * or ?, or as
      an UPTO, with the maximum given. */

      if (repeat_min == 0)
        {
        if (repeat_max == -1) *code++ = OP_STAR + repeat_type;
          else if (repeat_max == 1) *code++ = OP_QUERY + repeat_type;
        else
          {
          *code++ = OP_UPTO + repeat_type;
          PUT2INC(code, 0, repeat_max);
          }
        }

      /* A repeat minimum of 1 is optimized into some special cases. If the
      maximum is unlimited, we use OP_PLUS. Otherwise, the original item it
      left in place and, if the maximum is greater than 1, we use OP_UPTO with
      one less than the maximum. */

      else if (repeat_min == 1)
        {
        if (repeat_max == -1)
          *code++ = OP_PLUS + repeat_type;
        else
          {
          code = oldcode;                 /* leave previous item in place */
          if (repeat_max == 1) goto END_REPEAT;
          *code++ = OP_UPTO + repeat_type;
          PUT2INC(code, 0, repeat_max - 1);
          }
        }

      /* The case {n,n} is just an EXACT, while the general case {n,m} is
      handled as an EXACT followed by an UPTO. */

      else
        {
        *code++ = OP_EXACT + op_type;  /* NB EXACT doesn't have repeat_type */
        PUT2INC(code, 0, repeat_min);

        /* If the maximum is unlimited, insert an OP_STAR. Before doing so,
        we have to insert the character for the previous code. For a repeated
        Unicode property match, there is an extra byte that defines the
        required property. In UTF-8 mode, long characters have their length in
        c, with the 0x80 bit as a flag. */

        if (repeat_max < 0)
          {
#ifdef SUPPORT_UTF8
          if (utf8 && c >= 128)
            {
            memcpy(code, utf8_char, c & 7);
            code += c & 7;
            }
          else
#endif
            {
            *code++ = c;
            if (prop_type >= 0) *code++ = prop_type;
            }
          *code++ = OP_STAR + repeat_type;
          }

        /* Else insert an UPTO if the max is greater than the min, again
        preceded by the character, for the previously inserted code. */

        else if (repeat_max != repeat_min)
          {
#ifdef SUPPORT_UTF8
          if (utf8 && c >= 128)
            {
            memcpy(code, utf8_char, c & 7);
            code += c & 7;
            }
          else
#endif
          *code++ = c;
          if (prop_type >= 0) *code++ = prop_type;
          repeat_max -= repeat_min;
          *code++ = OP_UPTO + repeat_type;
          PUT2INC(code, 0, repeat_max);
          }
        }

      /* The character or character type itself comes last in all cases. */

#ifdef SUPPORT_UTF8
      if (utf8 && c >= 128)
        {
        memcpy(code, utf8_char, c & 7);
        code += c & 7;
        }
      else
#endif
      *code++ = c;

      /* For a repeated Unicode property match, there is an extra byte that
      defines the required property. */

#ifdef SUPPORT_UCP
      if (prop_type >= 0) *code++ = prop_type;
#endif
      }

    /* If previous was a character class or a back reference, we put the repeat
    stuff after it, but just skip the item if the repeat was {0,0}. */

    else if (*previous == OP_CLASS ||
             *previous == OP_NCLASS ||
#ifdef SUPPORT_UTF8
             *previous == OP_XCLASS ||
#endif
             *previous == OP_REF)
      {
      if (repeat_max == 0)
        {
        code = previous;
        goto END_REPEAT;
        }

      /* All real repeats make it impossible to handle partial matching (maybe
      one day we will be able to remove this restriction). */

      if (repeat_max != 1) cd->nopartial = TRUE;

      if (repeat_min == 0 && repeat_max == -1)
        *code++ = OP_CRSTAR + repeat_type;
      else if (repeat_min == 1 && repeat_max == -1)
        *code++ = OP_CRPLUS + repeat_type;
      else if (repeat_min == 0 && repeat_max == 1)
        *code++ = OP_CRQUERY + repeat_type;
      else
        {
        *code++ = OP_CRRANGE + repeat_type;
        PUT2INC(code, 0, repeat_min);
        if (repeat_max == -1) repeat_max = 0;  /* 2-byte encoding for max */
        PUT2INC(code, 0, repeat_max);
        }
      }

    /* If previous was a bracket group, we may have to replicate it in certain
    cases. */

    else if (*previous >= OP_BRA || *previous == OP_ONCE ||
             *previous == OP_COND)
      {
      register int i;
      int ketoffset = 0;
      int len = code - previous;
      uschar *bralink = NULL;

      /* If the maximum repeat count is unlimited, find the end of the bracket
      by scanning through from the start, and compute the offset back to it
      from the current code pointer. There may be an OP_OPT setting following
      the final KET, so we can't find the end just by going back from the code
      pointer. */

      if (repeat_max == -1)
        {
        register uschar *ket = previous;
        do ket += GET(ket, 1); while (*ket != OP_KET);
        ketoffset = code - ket;
        }

      /* The case of a zero minimum is special because of the need to stick
      OP_BRAZERO in front of it, and because the group appears once in the
      data, whereas in other cases it appears the minimum number of times. For
      this reason, it is simplest to treat this case separately, as otherwise
      the code gets far too messy. There are several special subcases when the
      minimum is zero. */

      if (repeat_min == 0)
        {
        /* If the maximum is also zero, we just omit the group from the output
        altogether. */

        if (repeat_max == 0)
          {
          code = previous;
          goto END_REPEAT;
          }

        /* If the maximum is 1 or unlimited, we just have to stick in the
        BRAZERO and do no more at this point. However, we do need to adjust
        any OP_RECURSE calls inside the group that refer to the group itself or
        any internal group, because the offset is from the start of the whole
        regex. Temporarily terminate the pattern while doing this. */

        if (repeat_max <= 1)
          {
          *code = OP_END;
          adjust_recurse(previous, 1, utf8, cd);
          memmove(previous+1, previous, len);
          code++;
          *previous++ = OP_BRAZERO + repeat_type;
          }

        /* If the maximum is greater than 1 and limited, we have to replicate
        in a nested fashion, sticking OP_BRAZERO before each set of brackets.
        The first one has to be handled carefully because it's the original
        copy, which has to be moved up. The remainder can be handled by code
        that is common with the non-zero minimum case below. We have to
        adjust the value or repeat_max, since one less copy is required. Once
        again, we may have to adjust any OP_RECURSE calls inside the group. */

        else
          {
          int offset;
          *code = OP_END;
          adjust_recurse(previous, 2 + LINK_SIZE, utf8, cd);
          memmove(previous + 2 + LINK_SIZE, previous, len);
          code += 2 + LINK_SIZE;
          *previous++ = OP_BRAZERO + repeat_type;
          *previous++ = OP_BRA;

          /* We chain together the bracket offset fields that have to be
          filled in later when the ends of the brackets are reached. */

          offset = (bralink == NULL)? 0 : previous - bralink;
          bralink = previous;
          PUTINC(previous, 0, offset);
          }

        repeat_max--;
        }

      /* If the minimum is greater than zero, replicate the group as many
      times as necessary, and adjust the maximum to the number of subsequent
      copies that we need. If we set a first char from the group, and didn't
      set a required char, copy the latter from the former. */

      else
        {
        if (repeat_min > 1)
          {
          if (groupsetfirstbyte && reqbyte < 0) reqbyte = firstbyte;
          for (i = 1; i < repeat_min; i++)
            {
            memcpy(code, previous, len);
            code += len;
            }
          }
        if (repeat_max > 0) repeat_max -= repeat_min;
        }

      /* This code is common to both the zero and non-zero minimum cases. If
      the maximum is limited, it replicates the group in a nested fashion,
      remembering the bracket starts on a stack. In the case of a zero minimum,
      the first one was set up above. In all cases the repeat_max now specifies
      the number of additional copies needed. */

      if (repeat_max >= 0)
        {
        for (i = repeat_max - 1; i >= 0; i--)
          {
          *code++ = OP_BRAZERO + repeat_type;

          /* All but the final copy start a new nesting, maintaining the
          chain of brackets outstanding. */

          if (i != 0)
            {
            int offset;
            *code++ = OP_BRA;
            offset = (bralink == NULL)? 0 : code - bralink;
            bralink = code;
            PUTINC(code, 0, offset);
            }

          memcpy(code, previous, len);
          code += len;
          }

        /* Now chain through the pending brackets, and fill in their length
        fields (which are holding the chain links pro tem). */

        while (bralink != NULL)
          {
          int oldlinkoffset;
          int offset = code - bralink + 1;
          uschar *bra = code - offset;
          oldlinkoffset = GET(bra, 1);
          bralink = (oldlinkoffset == 0)? NULL : bralink - oldlinkoffset;
          *code++ = OP_KET;
          PUTINC(code, 0, offset);
          PUT(bra, 1, offset);
          }
        }

      /* If the maximum is unlimited, set a repeater in the final copy. We
      can't just offset backwards from the current code point, because we
      don't know if there's been an options resetting after the ket. The
      correct offset was computed above. */

      else code[-ketoffset] = OP_KETRMAX + repeat_type;
      }

    /* Else there's some kind of shambles */

    else
      {
      *errorptr = ERR11;
      goto FAILED;
      }

    /* If the character following a repeat is '+', we wrap the entire repeated
    item inside OP_ONCE brackets. This is just syntactic sugar, taken from
    Sun's Java package. The repeated item starts at tempcode, not at previous,
    which might be the first part of a string whose (former) last char we
    repeated. However, we don't support '+' after a greediness '?'. */

    if (possessive_quantifier)
      {
      int len = code - tempcode;
      memmove(tempcode + 1+LINK_SIZE, tempcode, len);
      code += 1 + LINK_SIZE;
      len += 1 + LINK_SIZE;
      tempcode[0] = OP_ONCE;
      *code++ = OP_KET;
      PUTINC(code, 0, len);
      PUT(tempcode, 1, len);
      }

    /* In all case we no longer have a previous item. We also set the
    "follows varying string" flag for subsequently encountered reqbytes if
    it isn't already set and we have just passed a varying length item. */

    END_REPEAT:
    previous = NULL;
    cd->req_varyopt |= reqvary;
    break;


    /* Start of nested bracket sub-expression, or comment or lookahead or
    lookbehind or option setting or condition. First deal with special things
    that can come after a bracket; all are introduced by ?, and the appearance
    of any of them means that this is not a referencing group. They were
    checked for validity in the first pass over the string, so we don't have to
    check for syntax errors here.  */

    case '(':
    newoptions = options;
    skipbytes = 0;

    if (*(++ptr) == '?')
      {
      int set, unset;
      int *optset;

      switch (*(++ptr))
        {
        case '#':                 /* Comment; skip to ket */
        ptr++;
        while (*ptr != ')') ptr++;
        continue;

        case ':':                 /* Non-extracting bracket */
        bravalue = OP_BRA;
        ptr++;
        break;

        case '(':
        bravalue = OP_COND;       /* Conditional group */

        /* Condition to test for recursion */

        if (ptr[1] == 'R')
          {
          code[1+LINK_SIZE] = OP_CREF;
          PUT2(code, 2+LINK_SIZE, CREF_RECURSE);
          skipbytes = 3;
          ptr += 3;
          }

        /* Condition to test for a numbered subpattern match. We know that
        if a digit follows ( then there will just be digits until ) because
        the syntax was checked in the first pass. */

        else if ((digitab[ptr[1]] && ctype_digit) != 0)
          {
          int condref;                 /* Don't amalgamate; some compilers */
          condref = *(++ptr) - '0';    /* grumble at autoincrement in declaration */
          while (*(++ptr) != ')') condref = condref*10 + *ptr - '0';
          if (condref == 0)
            {
            *errorptr = ERR35;
            goto FAILED;
            }
          ptr++;
          code[1+LINK_SIZE] = OP_CREF;
          PUT2(code, 2+LINK_SIZE, condref);
          skipbytes = 3;
          }
        /* For conditions that are assertions, we just fall through, having
        set bravalue above. */
        break;

        case '=':                 /* Positive lookahead */
        bravalue = OP_ASSERT;
        ptr++;
        break;

        case '!':                 /* Negative lookahead */
        bravalue = OP_ASSERT_NOT;
        ptr++;
        break;

        case '<':                 /* Lookbehinds */
        switch (*(++ptr))
          {
          case '=':               /* Positive lookbehind */
          bravalue = OP_ASSERTBACK;
          ptr++;
          break;

          case '!':               /* Negative lookbehind */
          bravalue = OP_ASSERTBACK_NOT;
          ptr++;
          break;
          }
        break;

        case '>':                 /* One-time brackets */
        bravalue = OP_ONCE;
        ptr++;
        break;

        case 'C':                 /* Callout - may be followed by digits; */
        previous_callout = code;  /* Save for later completion */
        after_manual_callout = 1; /* Skip one item before completing */
        *code++ = OP_CALLOUT;     /* Already checked that the terminating */
          {                       /* closing parenthesis is present. */
          int n = 0;
          while ((digitab[*(++ptr)] & ctype_digit) != 0)
            n = n * 10 + *ptr - '0';
          if (n > 255)
            {
            *errorptr = ERR38;
            goto FAILED;
            }
          *code++ = n;
          PUT(code, 0, ptr - cd->start_pattern + 1);  /* Pattern offset */
          PUT(code, LINK_SIZE, 0);                    /* Default length */
          code += 2 * LINK_SIZE;
          }
        previous = NULL;
        continue;

        case 'P':                 /* Named subpattern handling */
        if (*(++ptr) == '<')      /* Definition */
          {
          int i, namelen;
          uschar *slot = cd->name_table;
          const uschar *name;     /* Don't amalgamate; some compilers */
          name = ++ptr;           /* grumble at autoincrement in declaration */

          while (*ptr++ != '>');
          namelen = ptr - name - 1;

          for (i = 0; i < cd->names_found; i++)
            {
            int crc = memcmp(name, slot+2, namelen);
            if (crc == 0)
              {
              if (slot[2+namelen] == 0)
                {
                *errorptr = ERR43;
                goto FAILED;
                }
              crc = -1;             /* Current name is substring */
              }
            if (crc < 0)
              {
              memmove(slot + cd->name_entry_size, slot,
                (cd->names_found - i) * cd->name_entry_size);
              break;
              }
            slot += cd->name_entry_size;
            }

          PUT2(slot, 0, *brackets + 1);
          memcpy(slot + 2, name, namelen);
          slot[2+namelen] = 0;
          cd->names_found++;
          goto NUMBERED_GROUP;
          }

        if (*ptr == '=' || *ptr == '>')  /* Reference or recursion */
          {
          int i, namelen;
          int type = *ptr++;
          const uschar *name = ptr;
          uschar *slot = cd->name_table;

          while (*ptr != ')') ptr++;
          namelen = ptr - name;

          for (i = 0; i < cd->names_found; i++)
            {
            if (strncmp((char *)name, (char *)slot+2, namelen) == 0) break;
            slot += cd->name_entry_size;
            }
          if (i >= cd->names_found)
            {
            *errorptr = ERR15;
            goto FAILED;
            }

          recno = GET2(slot, 0);

          if (type == '>') goto HANDLE_RECURSION;  /* A few lines below */

          /* Back reference */

          previous = code;
          *code++ = OP_REF;
          PUT2INC(code, 0, recno);
          cd->backref_map |= (recno < 32)? (1 << recno) : 1;
          if (recno > cd->top_backref) cd->top_backref = recno;
          continue;
          }

        /* Should never happen */
        break;

        case 'R':                 /* Pattern recursion */
        ptr++;                    /* Same as (?0)      */
        /* Fall through */

        /* Recursion or "subroutine" call */

        case '0': case '1': case '2': case '3': case '4':
        case '5': case '6': case '7': case '8': case '9':
          {
          const uschar *called;
          recno = 0;
          while((digitab[*ptr] & ctype_digit) != 0)
            recno = recno * 10 + *ptr++ - '0';

          /* Come here from code above that handles a named recursion */

          HANDLE_RECURSION:

          previous = code;

          /* Find the bracket that is being referenced. Temporarily end the
          regex in case it doesn't exist. */

          *code = OP_END;
          called = (recno == 0)?
            cd->start_code : find_bracket(cd->start_code, utf8, recno);

          if (called == NULL)
            {
            *errorptr = ERR15;
            goto FAILED;
            }

          /* If the subpattern is still open, this is a recursive call. We
          check to see if this is a left recursion that could loop for ever,
          and diagnose that case. */

          if (GET(called, 1) == 0 && could_be_empty(called, code, bcptr, utf8))
            {
            *errorptr = ERR40;
            goto FAILED;
            }

          /* Insert the recursion/subroutine item */

          *code = OP_RECURSE;
          PUT(code, 1, called - cd->start_code);
          code += 1 + LINK_SIZE;
          }
        continue;

        /* Character after (? not specially recognized */

        default:                  /* Option setting */
        set = unset = 0;
        optset = &set;

        while (*ptr != ')' && *ptr != ':')
          {
          switch (*ptr++)
            {
            case '-': optset = &unset; break;

            case 'i': *optset |= PCRE_CASELESS; break;
            case 'm': *optset |= PCRE_MULTILINE; break;
            case 's': *optset |= PCRE_DOTALL; break;
            case 'x': *optset |= PCRE_EXTENDED; break;
            case 'U': *optset |= PCRE_UNGREEDY; break;
            case 'X': *optset |= PCRE_EXTRA; break;
            }
          }

        /* Set up the changed option bits, but don't change anything yet. */

        newoptions = (options | set) & (~unset);

        /* If the options ended with ')' this is not the start of a nested
        group with option changes, so the options change at this level. Compile
        code to change the ims options if this setting actually changes any of
        them. We also pass the new setting back so that it can be put at the
        start of any following branches, and when this group ends (if we are in
        a group), a resetting item can be compiled.

        Note that if this item is right at the start of the pattern, the
        options will have been abstracted and made global, so there will be no
        change to compile. */

        if (*ptr == ')')
          {
          if ((options & PCRE_IMS) != (newoptions & PCRE_IMS))
            {
            *code++ = OP_OPT;
            *code++ = newoptions & PCRE_IMS;
            }

          /* Change options at this level, and pass them back for use
          in subsequent branches. Reset the greedy defaults and the case
          value for firstbyte and reqbyte. */

          *optionsptr = options = newoptions;
          greedy_default = ((newoptions & PCRE_UNGREEDY) != 0);
          greedy_non_default = greedy_default ^ 1;
          req_caseopt = ((options & PCRE_CASELESS) != 0)? REQ_CASELESS : 0;

          previous = NULL;       /* This item can't be repeated */
          continue;              /* It is complete */
          }

        /* If the options ended with ':' we are heading into a nested group
        with possible change of options. Such groups are non-capturing and are
        not assertions of any kind. All we need to do is skip over the ':';
        the newoptions value is handled below. */

        bravalue = OP_BRA;
        ptr++;
        }
      }

    /* If PCRE_NO_AUTO_CAPTURE is set, all unadorned brackets become
    non-capturing and behave like (?:...) brackets */

    else if ((options & PCRE_NO_AUTO_CAPTURE) != 0)
      {
      bravalue = OP_BRA;
      }

    /* Else we have a referencing group; adjust the opcode. If the bracket
    number is greater than EXTRACT_BASIC_MAX, we set the opcode one higher, and
    arrange for the true number to follow later, in an OP_BRANUMBER item. */

    else
      {
      NUMBERED_GROUP:
      if (++(*brackets) > EXTRACT_BASIC_MAX)
        {
        bravalue = OP_BRA + EXTRACT_BASIC_MAX + 1;
        code[1+LINK_SIZE] = OP_BRANUMBER;
        PUT2(code, 2+LINK_SIZE, *brackets);
        skipbytes = 3;
        }
      else bravalue = OP_BRA + *brackets;
      }

    /* Process nested bracketed re. Assertions may not be repeated, but other
    kinds can be. We copy code into a non-register variable in order to be able
    to pass its address because some compilers complain otherwise. Pass in a
    new setting for the ims options if they have changed. */

    previous = (bravalue >= OP_ONCE)? code : NULL;
    *code = bravalue;
    tempcode = code;
    tempreqvary = cd->req_varyopt;     /* Save value before bracket */

    if (!compile_regex(
         newoptions,                   /* The complete new option state */
         options & PCRE_IMS,           /* The previous ims option state */
         brackets,                     /* Extracting bracket count */
         &tempcode,                    /* Where to put code (updated) */
         &ptr,                         /* Input pointer (updated) */
         errorptr,                     /* Where to put an error message */
         (bravalue == OP_ASSERTBACK ||
          bravalue == OP_ASSERTBACK_NOT), /* TRUE if back assert */
         skipbytes,                    /* Skip over OP_COND/OP_BRANUMBER */
         &subfirstbyte,                /* For possible first char */
         &subreqbyte,                  /* For possible last char */
         bcptr,                        /* Current branch chain */
         cd))                          /* Tables block */
      goto FAILED;

    /* At the end of compiling, code is still pointing to the start of the
    group, while tempcode has been updated to point past the end of the group
    and any option resetting that may follow it. The pattern pointer (ptr)
    is on the bracket. */

    /* If this is a conditional bracket, check that there are no more than
    two branches in the group. */

    else if (bravalue == OP_COND)
      {
      uschar *tc = code;
      condcount = 0;

      do {
         condcount++;
         tc += GET(tc,1);
         }
      while (*tc != OP_KET);

      if (condcount > 2)
        {
        *errorptr = ERR27;
        goto FAILED;
        }

      /* If there is just one branch, we must not make use of its firstbyte or
      reqbyte, because this is equivalent to an empty second branch. */

      if (condcount == 1) subfirstbyte = subreqbyte = REQ_NONE;
      }

    /* Handle updating of the required and first characters. Update for normal
    brackets of all kinds, and conditions with two branches (see code above).
    If the bracket is followed by a quantifier with zero repeat, we have to
    back off. Hence the definition of zeroreqbyte and zerofirstbyte outside the
    main loop so that they can be accessed for the back off. */

    zeroreqbyte = reqbyte;
    zerofirstbyte = firstbyte;
    groupsetfirstbyte = FALSE;

    if (bravalue >= OP_BRA || bravalue == OP_ONCE || bravalue == OP_COND)
      {
      /* If we have not yet set a firstbyte in this branch, take it from the
      subpattern, remembering that it was set here so that a repeat of more
      than one can replicate it as reqbyte if necessary. If the subpattern has
      no firstbyte, set "none" for the whole branch. In both cases, a zero
      repeat forces firstbyte to "none". */

      if (firstbyte == REQ_UNSET)
        {
        if (subfirstbyte >= 0)
          {
          firstbyte = subfirstbyte;
          groupsetfirstbyte = TRUE;
          }
        else firstbyte = REQ_NONE;
        zerofirstbyte = REQ_NONE;
        }

      /* If firstbyte was previously set, convert the subpattern's firstbyte
      into reqbyte if there wasn't one, using the vary flag that was in
      existence beforehand. */

      else if (subfirstbyte >= 0 && subreqbyte < 0)
        subreqbyte = subfirstbyte | tempreqvary;

      /* If the subpattern set a required byte (or set a first byte that isn't
      really the first byte - see above), set it. */

      if (subreqbyte >= 0) reqbyte = subreqbyte;
      }

    /* For a forward assertion, we take the reqbyte, if set. This can be
    helpful if the pattern that follows the assertion doesn't set a different
    char. For example, it's useful for /(?=abcde).+/. We can't set firstbyte
    for an assertion, however because it leads to incorrect effect for patterns
    such as /(?=a)a.+/ when the "real" "a" would then become a reqbyte instead
    of a firstbyte. This is overcome by a scan at the end if there's no
    firstbyte, looking for an asserted first char. */

    else if (bravalue == OP_ASSERT && subreqbyte >= 0) reqbyte = subreqbyte;

    /* Now update the main code pointer to the end of the group. */

    code = tempcode;

    /* Error if hit end of pattern */

    if (*ptr != ')')
      {
      *errorptr = ERR14;
      goto FAILED;
      }
    break;

    /* Check \ for being a real metacharacter; if not, fall through and handle
    it as a data character at the start of a string. Escape items are checked
    for validity in the pre-compiling pass. */

    case '\\':
    tempptr = ptr;
    c = check_escape(&ptr, errorptr, *brackets, options, FALSE);

    /* Handle metacharacters introduced by \. For ones like \d, the ESC_ values
    are arranged to be the negation of the corresponding OP_values. For the
    back references, the values are ESC_REF plus the reference number. Only
    back references and those types that consume a character may be repeated.
    We can test for values between ESC_b and ESC_Z for the latter; this may
    have to change if any new ones are ever created. */

    if (c < 0)
      {
      if (-c == ESC_Q)            /* Handle start of quoted string */
        {
        if (ptr[1] == '\\' && ptr[2] == 'E') ptr += 2; /* avoid empty string */
          else inescq = TRUE;
        continue;
        }

      /* For metasequences that actually match a character, we disable the
      setting of a first character if it hasn't already been set. */

      if (firstbyte == REQ_UNSET && -c > ESC_b && -c < ESC_Z)
        firstbyte = REQ_NONE;

      /* Set values to reset to if this is followed by a zero repeat. */

      zerofirstbyte = firstbyte;
      zeroreqbyte = reqbyte;

      /* Back references are handled specially */

      if (-c >= ESC_REF)
        {
        int number = -c - ESC_REF;
        previous = code;
        *code++ = OP_REF;
        PUT2INC(code, 0, number);
        }

      /* So are Unicode property matches, if supported. We know that get_ucp
      won't fail because it was tested in the pre-pass. */

#ifdef SUPPORT_UCP
      else if (-c == ESC_P || -c == ESC_p)
        {
        BOOL negated;
        int value = get_ucp(&ptr, &negated, errorptr);
        previous = code;
        *code++ = ((-c == ESC_p) != negated)? OP_PROP : OP_NOTPROP;
        *code++ = value;
        }
#endif

      /* For the rest, we can obtain the OP value by negating the escape
      value */

      else
        {
        previous = (-c > ESC_b && -c < ESC_Z)? code : NULL;
        *code++ = -c;
        }
      continue;
      }

    /* We have a data character whose value is in c. In UTF-8 mode it may have
    a value > 127. We set its representation in the length/buffer, and then
    handle it as a data character. */

#ifdef SUPPORT_UTF8
    if (utf8 && c > 127)
      mclength = ord2utf8(c, mcbuffer);
    else
#endif

     {
     mcbuffer[0] = c;
     mclength = 1;
     }

    goto ONE_CHAR;

    /* Handle a literal character. It is guaranteed not to be whitespace or #
    when the extended flag is set. If we are in UTF-8 mode, it may be a
    multi-byte literal character. */

    default:
    NORMAL_CHAR:
    mclength = 1;
    mcbuffer[0] = c;

#ifdef SUPPORT_UTF8
    if (utf8 && (c & 0xc0) == 0xc0)
      {
      while ((ptr[1] & 0xc0) == 0x80)
        mcbuffer[mclength++] = *(++ptr);
      }
#endif

    /* At this point we have the character's bytes in mcbuffer, and the length
    in mclength. When not in UTF-8 mode, the length is always 1. */

    ONE_CHAR:
    previous = code;
    *code++ = ((options & PCRE_CASELESS) != 0)? OP_CHARNC : OP_CHAR;
    for (c = 0; c < mclength; c++) *code++ = mcbuffer[c];

    /* Set the first and required bytes appropriately. If no previous first
    byte, set it from this character, but revert to none on a zero repeat.
    Otherwise, leave the firstbyte value alone, and don't change it on a zero
    repeat. */

    if (firstbyte == REQ_UNSET)
      {
      zerofirstbyte = REQ_NONE;
      zeroreqbyte = reqbyte;

      /* If the character is more than one byte long, we can set firstbyte
      only if it is not to be matched caselessly. */

      if (mclength == 1 || req_caseopt == 0)
        {
        firstbyte = mcbuffer[0] | req_caseopt;
        if (mclength != 1) reqbyte = code[-1] | cd->req_varyopt;
        }
      else firstbyte = reqbyte = REQ_NONE;
      }

    /* firstbyte was previously set; we can set reqbyte only the length is
    1 or the matching is caseful. */

    else
      {
      zerofirstbyte = firstbyte;
      zeroreqbyte = reqbyte;
      if (mclength == 1 || req_caseopt == 0)
        reqbyte = code[-1] | req_caseopt | cd->req_varyopt;
      }

    break;            /* End of literal character handling */
    }
  }                   /* end of big loop */

/* Control never reaches here by falling through, only by a goto for all the
error states. Pass back the position in the pattern so that it can be displayed
to the user for diagnosing the error. */

FAILED:
*ptrptr = ptr;
return FALSE;
}


/*************************************************
*     Compile sequence of alternatives           *
*************************************************/

/* On entry, ptr is pointing past the bracket character, but on return
it points to the closing bracket, or vertical bar, or end of string.
The code variable is pointing at the byte into which the BRA operator has been
stored. If the ims options are changed at the start (for a (?ims: group) or
during any branch, we need to insert an OP_OPT item at the start of every
following branch to ensure they get set correctly at run time, and also pass
the new options into every subsequent branch compile.

Argument:
  options        option bits, including any changes for this subpattern
  oldims         previous settings of ims option bits
  brackets       -> int containing the number of extracting brackets used
  codeptr        -> the address of the current code pointer
  ptrptr         -> the address of the current pattern pointer
  errorptr       -> pointer to error message
  lookbehind     TRUE if this is a lookbehind assertion
  skipbytes      skip this many bytes at start (for OP_COND, OP_BRANUMBER)
  firstbyteptr   place to put the first required character, or a negative number
  reqbyteptr     place to put the last required character, or a negative number
  bcptr          pointer to the chain of currently open branches
  cd             points to the data block with tables pointers etc.

Returns:      TRUE on success
*/

static BOOL
compile_regex(int options, int oldims, int *brackets, uschar **codeptr,
  const uschar **ptrptr, const char **errorptr, BOOL lookbehind, int skipbytes,
  int *firstbyteptr, int *reqbyteptr, branch_chain *bcptr, compile_data *cd)
{
const uschar *ptr = *ptrptr;
uschar *code = *codeptr;
uschar *last_branch = code;
uschar *start_bracket = code;
uschar *reverse_count = NULL;
int firstbyte, reqbyte;
int branchfirstbyte, branchreqbyte;
branch_chain bc;

bc.outer = bcptr;
bc.current = code;

firstbyte = reqbyte = REQ_UNSET;

/* Offset is set zero to mark that this bracket is still open */

PUT(code, 1, 0);
code += 1 + LINK_SIZE + skipbytes;

/* Loop for each alternative branch */

for (;;)
  {
  /* Handle a change of ims options at the start of the branch */

  if ((options & PCRE_IMS) != oldims)
    {
    *code++ = OP_OPT;
    *code++ = options & PCRE_IMS;
    }

  /* Set up dummy OP_REVERSE if lookbehind assertion */

  if (lookbehind)
    {
    *code++ = OP_REVERSE;
    reverse_count = code;
    PUTINC(code, 0, 0);
    }

  /* Now compile the branch */

  if (!compile_branch(&options, brackets, &code, &ptr, errorptr,
        &branchfirstbyte, &branchreqbyte, &bc, cd))
    {
    *ptrptr = ptr;
    return FALSE;
    }

  /* If this is the first branch, the firstbyte and reqbyte values for the
  branch become the values for the regex. */

  if (*last_branch != OP_ALT)
    {
    firstbyte = branchfirstbyte;
    reqbyte = branchreqbyte;
    }

  /* If this is not the first branch, the first char and reqbyte have to
  match the values from all the previous branches, except that if the previous
  value for reqbyte didn't have REQ_VARY set, it can still match, and we set
  REQ_VARY for the regex. */

  else
    {
    /* If we previously had a firstbyte, but it doesn't match the new branch,
    we have to abandon the firstbyte for the regex, but if there was previously
    no reqbyte, it takes on the value of the old firstbyte. */

    if (firstbyte >= 0 && firstbyte != branchfirstbyte)
      {
      if (reqbyte < 0) reqbyte = firstbyte;
      firstbyte = REQ_NONE;
      }

    /* If we (now or from before) have no firstbyte, a firstbyte from the
    branch becomes a reqbyte if there isn't a branch reqbyte. */

    if (firstbyte < 0 && branchfirstbyte >= 0 && branchreqbyte < 0)
        branchreqbyte = branchfirstbyte;

    /* Now ensure that the reqbytes match */

    if ((reqbyte & ~REQ_VARY) != (branchreqbyte & ~REQ_VARY))
      reqbyte = REQ_NONE;
    else reqbyte |= branchreqbyte;   /* To "or" REQ_VARY */
    }

  /* If lookbehind, check that this branch matches a fixed-length string,
  and put the length into the OP_REVERSE item. Temporarily mark the end of
  the branch with OP_END. */

  if (lookbehind)
    {
    int length;
    *code = OP_END;
    length = find_fixedlength(last_branch, options);
    DPRINTF(("fixed length = %d\n", length));
    if (length < 0)
      {
      *errorptr = (length == -2)? ERR36 : ERR25;
      *ptrptr = ptr;
      return FALSE;
      }
    PUT(reverse_count, 0, length);
    }

  /* Reached end of expression, either ')' or end of pattern. Go back through
  the alternative branches and reverse the chain of offsets, with the field in
  the BRA item now becoming an offset to the first alternative. If there are
  no alternatives, it points to the end of the group. The length in the
  terminating ket is always the length of the whole bracketed item. If any of
  the ims options were changed inside the group, compile a resetting op-code
  following, except at the very end of the pattern. Return leaving the pointer
  at the terminating char. */

  if (*ptr != '|')
    {
    int length = code - last_branch;
    do
      {
      int prev_length = GET(last_branch, 1);
      PUT(last_branch, 1, length);
      length = prev_length;
      last_branch -= length;
      }
    while (length > 0);

    /* Fill in the ket */

    *code = OP_KET;
    PUT(code, 1, code - start_bracket);
    code += 1 + LINK_SIZE;

    /* Resetting option if needed */

    if ((options & PCRE_IMS) != oldims && *ptr == ')')
      {
      *code++ = OP_OPT;
      *code++ = oldims;
      }

    /* Set values to pass back */

    *codeptr = code;
    *ptrptr = ptr;
    *firstbyteptr = firstbyte;
    *reqbyteptr = reqbyte;
    return TRUE;
    }

  /* Another branch follows; insert an "or" node. Its length field points back
  to the previous branch while the bracket remains open. At the end the chain
  is reversed. It's done like this so that the start of the bracket has a
  zero offset until it is closed, making it possible to detect recursion. */

  *code = OP_ALT;
  PUT(code, 1, code - last_branch);
  bc.current = last_branch = code;
  code += 1 + LINK_SIZE;
  ptr++;
  }
/* Control never reaches here */
}


/*************************************************
*          Check for anchored expression         *
*************************************************/

/* Try to find out if this is an anchored regular expression. Consider each
alternative branch. If they all start with OP_SOD or OP_CIRC, or with a bracket
all of whose alternatives start with OP_SOD or OP_CIRC (recurse ad lib), then
it's anchored. However, if this is a multiline pattern, then only OP_SOD
counts, since OP_CIRC can match in the middle.

We can also consider a regex to be anchored if OP_SOM starts all its branches.
This is the code for \G, which means "match at start of match position, taking
into account the match offset".

A branch is also implicitly anchored if it starts with .* and DOTALL is set,
because that will try the rest of the pattern at all possible matching points,
so there is no point trying again.... er ....

.... except when the .* appears inside capturing parentheses, and there is a
subsequent back reference to those parentheses. We haven't enough information
to catch that case precisely.

At first, the best we could do was to detect when .* was in capturing brackets
and the highest back reference was greater than or equal to that level.
However, by keeping a bitmap of the first 31 back references, we can catch some
of the more common cases more precisely.

Arguments:
  code           points to start of expression (the bracket)
  options        points to the options setting
  bracket_map    a bitmap of which brackets we are inside while testing; this
                  handles up to substring 31; after that we just have to take
                  the less precise approach
  backref_map    the back reference bitmap

Returns:     TRUE or FALSE
*/

static BOOL
is_anchored(register const uschar *code, int *options, unsigned int bracket_map,
  unsigned int backref_map)
{
do {
   const uschar *scode =
     first_significant_code(code + 1+LINK_SIZE, options, PCRE_MULTILINE, FALSE);
   register int op = *scode;

   /* Capturing brackets */

   if (op > OP_BRA)
     {
     int new_map;
     op -= OP_BRA;
     if (op > EXTRACT_BASIC_MAX) op = GET2(scode, 2+LINK_SIZE);
     new_map = bracket_map | ((op < 32)? (1 << op) : 1);
     if (!is_anchored(scode, options, new_map, backref_map)) return FALSE;
     }

   /* Other brackets */

   else if (op == OP_BRA || op == OP_ASSERT || op == OP_ONCE || op == OP_COND)
     {
     if (!is_anchored(scode, options, bracket_map, backref_map)) return FALSE;
     }

   /* .* is not anchored unless DOTALL is set and it isn't in brackets that
   are or may be referenced. */

   else if ((op == OP_TYPESTAR || op == OP_TYPEMINSTAR) &&
            (*options & PCRE_DOTALL) != 0)
     {
     if (scode[1] != OP_ANY || (bracket_map & backref_map) != 0) return FALSE;
     }

   /* Check for explicit anchoring */

   else if (op != OP_SOD && op != OP_SOM &&
           ((*options & PCRE_MULTILINE) != 0 || op != OP_CIRC))
     return FALSE;
   code += GET(code, 1);
   }
while (*code == OP_ALT);   /* Loop for each alternative */
return TRUE;
}


/*************************************************
*         Check for starting with ^ or .*        *
*************************************************/

/* This is called to find out if every branch starts with ^ or .* so that
"first char" processing can be done to speed things up in multiline
matching and for non-DOTALL patterns that start with .* (which must start at
the beginning or after \n). As in the case of is_anchored() (see above), we
have to take account of back references to capturing brackets that contain .*
because in that case we can't make the assumption.

Arguments:
  code           points to start of expression (the bracket)
  bracket_map    a bitmap of which brackets we are inside while testing; this
                  handles up to substring 31; after that we just have to take
                  the less precise approach
  backref_map    the back reference bitmap

Returns:         TRUE or FALSE
*/

static BOOL
is_startline(const uschar *code, unsigned int bracket_map,
  unsigned int backref_map)
{
do {
   const uschar *scode = first_significant_code(code + 1+LINK_SIZE, NULL, 0,
     FALSE);
   register int op = *scode;

   /* Capturing brackets */

   if (op > OP_BRA)
     {
     int new_map;
     op -= OP_BRA;
     if (op > EXTRACT_BASIC_MAX) op = GET2(scode, 2+LINK_SIZE);
     new_map = bracket_map | ((op < 32)? (1 << op) : 1);
     if (!is_startline(scode, new_map, backref_map)) return FALSE;
     }

   /* Other brackets */

   else if (op == OP_BRA || op == OP_ASSERT || op == OP_ONCE || op == OP_COND)
     { if (!is_startline(scode, bracket_map, backref_map)) return FALSE; }

   /* .* means "start at start or after \n" if it isn't in brackets that
   may be referenced. */

   else if (op == OP_TYPESTAR || op == OP_TYPEMINSTAR)
     {
     if (scode[1] != OP_ANY || (bracket_map & backref_map) != 0) return FALSE;
     }

   /* Check for explicit circumflex */

   else if (op != OP_CIRC) return FALSE;

   /* Move on to the next alternative */

   code += GET(code, 1);
   }
while (*code == OP_ALT);  /* Loop for each alternative */
return TRUE;
}


/*************************************************
*       Check for asserted fixed first char      *
*************************************************/

/* During compilation, the "first char" settings from forward assertions are
discarded, because they can cause conflicts with actual literals that follow.
However, if we end up without a first char setting for an unanchored pattern,
it is worth scanning the regex to see if there is an initial asserted first
char. If all branches start with the same asserted char, or with a bracket all
of whose alternatives start with the same asserted char (recurse ad lib), then
we return that char, otherwise -1.

Arguments:
  code       points to start of expression (the bracket)
  options    pointer to the options (used to check casing changes)
  inassert   TRUE if in an assertion

Returns:     -1 or the fixed first char
*/

static int
find_firstassertedchar(const uschar *code, int *options, BOOL inassert)
{
register int c = -1;
do {
   int d;
   const uschar *scode =
     first_significant_code(code + 1+LINK_SIZE, options, PCRE_CASELESS, TRUE);
   register int op = *scode;

   if (op >= OP_BRA) op = OP_BRA;

   switch(op)
     {
     default:
     return -1;

     case OP_BRA:
     case OP_ASSERT:
     case OP_ONCE:
     case OP_COND:
     if ((d = find_firstassertedchar(scode, options, op == OP_ASSERT)) < 0)
       return -1;
     if (c < 0) c = d; else if (c != d) return -1;
     break;

     case OP_EXACT:       /* Fall through */
     scode += 2;

     case OP_CHAR:
     case OP_CHARNC:
     case OP_PLUS:
     case OP_MINPLUS:
     if (!inassert) return -1;
     if (c < 0)
       {
       c = scode[1];
       if ((*options & PCRE_CASELESS) != 0) c |= REQ_CASELESS;
       }
     else if (c != scode[1]) return -1;
     break;
     }

   code += GET(code, 1);
   }
while (*code == OP_ALT);
return c;
}


#ifdef SUPPORT_UTF8
/*************************************************
*         Validate a UTF-8 string                *
*************************************************/

/* This function is called (optionally) at the start of compile or match, to
validate that a supposed UTF-8 string is actually valid. The early check means
that subsequent code can assume it is dealing with a valid string. The check
can be turned off for maximum performance, but then consequences of supplying
an invalid string are then undefined.

Arguments:
  string       points to the string
  length       length of string, or -1 if the string is zero-terminated

Returns:       < 0    if the string is a valid UTF-8 string
               >= 0   otherwise; the value is the offset of the bad byte
*/

static int
valid_utf8(const uschar *string, int length)
{
register const uschar *p;

if (length < 0)
  {
  for (p = string; *p != 0; p++);
  length = p - string;
  }

for (p = string; length-- > 0; p++)
  {
  register int ab;
  register int c = *p;
  if (c < 128) continue;
  if ((c & 0xc0) != 0xc0) return p - string;
  ab = utf8_table4[c & 0x3f];  /* Number of additional bytes */
  if (length < ab) return p - string;
  length -= ab;

  /* Check top bits in the second byte */
  if ((*(++p) & 0xc0) != 0x80) return p - string;

  /* Check for overlong sequences for each different length */
  switch (ab)
    {
    /* Check for xx00 000x */
    case 1:
    if ((c & 0x3e) == 0) return p - string;
    continue;   /* We know there aren't any more bytes to check */

    /* Check for 1110 0000, xx0x xxxx */
    case 2:
    if (c == 0xe0 && (*p & 0x20) == 0) return p - string;
    break;

    /* Check for 1111 0000, xx00 xxxx */
    case 3:
    if (c == 0xf0 && (*p & 0x30) == 0) return p - string;
    break;

    /* Check for 1111 1000, xx00 0xxx */
    case 4:
    if (c == 0xf8 && (*p & 0x38) == 0) return p - string;
    break;

    /* Check for leading 0xfe or 0xff, and then for 1111 1100, xx00 00xx */
    case 5:
    if (c == 0xfe || c == 0xff ||
       (c == 0xfc && (*p & 0x3c) == 0)) return p - string;
    break;
    }

  /* Check for valid bytes after the 2nd, if any; all must start 10 */
  while (--ab > 0)
    {
    if ((*(++p) & 0xc0) != 0x80) return p - string;
    }
  }

return -1;
}
#endif


/*************************************************
*        Compile a Regular Expression            *
*************************************************/

/* This function takes a string and returns a pointer to a block of store
holding a compiled version of the expression.

Arguments:
  pattern      the regular expression
  options      various option bits
  errorptr     pointer to pointer to error text
  erroroffset  ptr offset in pattern where error was detected
  tables       pointer to character tables or NULL

Returns:       pointer to compiled data block, or NULL on error,
               with errorptr and erroroffset set
*/

EXPORT pcre *
pcre_compile(const char *pattern, int options, const char **errorptr,
  int *erroroffset, const unsigned char *tables)
{
real_pcre *re;
int length = 1 + LINK_SIZE;      /* For initial BRA plus length */
int runlength;
int c, firstbyte, reqbyte;
int bracount = 0;
int branch_extra = 0;
int branch_newextra;
int item_count = -1;
int name_count = 0;
int max_name_size = 0;
int lastitemlength = 0;
#ifdef SUPPORT_UTF8
BOOL utf8;
BOOL class_utf8;
#endif
BOOL inescq = FALSE;
unsigned int brastackptr = 0;
size_t size;
uschar *code;
const uschar *codestart;
const uschar *ptr;
compile_data compile_block;
int brastack[BRASTACK_SIZE];
uschar bralenstack[BRASTACK_SIZE];

/* We can't pass back an error message if errorptr is NULL; I guess the best we
can do is just return NULL. */

if (errorptr == NULL) return NULL;
*errorptr = NULL;

/* However, we can give a message for this error */

if (erroroffset == NULL)
  {
  *errorptr = ERR16;
  return NULL;
  }
*erroroffset = 0;

/* Can't support UTF8 unless PCRE has been compiled to include the code. */

#ifdef SUPPORT_UTF8
utf8 = (options & PCRE_UTF8) != 0;
if (utf8 && (options & PCRE_NO_UTF8_CHECK) == 0 &&
     (*erroroffset = valid_utf8((uschar *)pattern, -1)) >= 0)
  {
  *errorptr = ERR44;
  return NULL;
  }
#else
if ((options & PCRE_UTF8) != 0)
  {
  *errorptr = ERR32;
  return NULL;
  }
#endif

if ((options & ~PUBLIC_OPTIONS) != 0)
  {
  *errorptr = ERR17;
  return NULL;
  }

/* Set up pointers to the individual character tables */

if (tables == NULL) tables = pcre_default_tables;
compile_block.lcc = tables + lcc_offset;
compile_block.fcc = tables + fcc_offset;
compile_block.cbits = tables + cbits_offset;
compile_block.ctypes = tables + ctypes_offset;

/* Maximum back reference and backref bitmap. This is updated for numeric
references during the first pass, but for named references during the actual
compile pass. The bitmap records up to 31 back references to help in deciding
whether (.*) can be treated as anchored or not. */

compile_block.top_backref = 0;
compile_block.backref_map = 0;

/* Reflect pattern for debugging output */

DPRINTF(("------------------------------------------------------------------\n"));
DPRINTF(("%s\n", pattern));

/* The first thing to do is to make a pass over the pattern to compute the
amount of store required to hold the compiled code. This does not have to be
perfect as long as errors are overestimates. At the same time we can detect any
flag settings right at the start, and extract them. Make an attempt to correct
for any counted white space if an "extended" flag setting appears late in the
pattern. We can't be so clever for #-comments. */

ptr = (const uschar *)(pattern - 1);
while ((c = *(++ptr)) != 0)
  {
  int min, max;
  int class_optcount;
  int bracket_length;
  int duplength;

  /* If we are inside a \Q...\E sequence, all chars are literal */

  if (inescq)
    {
    if ((options & PCRE_AUTO_CALLOUT) != 0) length += 2 + 2*LINK_SIZE;
    goto NORMAL_CHAR;
    }

  /* Otherwise, first check for ignored whitespace and comments */

  if ((options & PCRE_EXTENDED) != 0)
    {
    if ((compile_block.ctypes[c] & ctype_space) != 0) continue;
    if (c == '#')
      {
      /* The space before the ; is to avoid a warning on a silly compiler
      on the Macintosh. */
      while ((c = *(++ptr)) != 0 && c != NEWLINE) ;
      if (c == 0) break;
      continue;
      }
    }

  item_count++;    /* Is zero for the first non-comment item */

  /* Allow space for auto callout before every item except quantifiers. */

  if ((options & PCRE_AUTO_CALLOUT) != 0 &&
       c != '*' && c != '+' && c != '?' &&
       (c != '{' || !is_counted_repeat(ptr + 1)))
    length += 2 + 2*LINK_SIZE;

  switch(c)
    {
    /* A backslashed item may be an escaped data character or it may be a
    character type. */

    case '\\':
    c = check_escape(&ptr, errorptr, bracount, options, FALSE);
    if (*errorptr != NULL) goto PCRE_ERROR_RETURN;

    lastitemlength = 1;     /* Default length of last item for repeats */

    if (c >= 0)             /* Data character */
      {
      length += 2;          /* For a one-byte character */

#ifdef SUPPORT_UTF8
      if (utf8 && c > 127)
        {
        int i;
        for (i = 0; i < sizeof(utf8_table1)/sizeof(int); i++)
          if (c <= utf8_table1[i]) break;
        length += i;
        lastitemlength += i;
        }
#endif

      continue;
      }

    /* If \Q, enter "literal" mode */

    if (-c == ESC_Q)
      {
      inescq = TRUE;
      continue;
      }

    /* \X is supported only if Unicode property support is compiled */

#ifndef SUPPORT_UCP
    if (-c == ESC_X)
      {
      *errorptr = ERR45;
      goto PCRE_ERROR_RETURN;
      }
#endif

    /* \P and \p are for Unicode properties, but only when the support has
    been compiled. Each item needs 2 bytes. */

    else if (-c == ESC_P || -c == ESC_p)
      {
#ifdef SUPPORT_UCP
      BOOL negated;
      length += 2;
      lastitemlength = 2;
      if (get_ucp(&ptr, &negated, errorptr) < 0) goto PCRE_ERROR_RETURN;
      continue;
#else
      *errorptr = ERR45;
      goto PCRE_ERROR_RETURN;
#endif
      }

    /* Other escapes need one byte */

    length++;

    /* A back reference needs an additional 2 bytes, plus either one or 5
    bytes for a repeat. We also need to keep the value of the highest
    back reference. */

    if (c <= -ESC_REF)
      {
      int refnum = -c - ESC_REF;
      compile_block.backref_map |= (refnum < 32)? (1 << refnum) : 1;
      if (refnum > compile_block.top_backref)
        compile_block.top_backref = refnum;
      length += 2;   /* For single back reference */
      if (ptr[1] == '{' && is_counted_repeat(ptr+2))
        {
        ptr = read_repeat_counts(ptr+2, &min, &max, errorptr);
        if (*errorptr != NULL) goto PCRE_ERROR_RETURN;
        if ((min == 0 && (max == 1 || max == -1)) ||
          (min == 1 && max == -1))
            length++;
        else length += 5;
        if (ptr[1] == '?') ptr++;
        }
      }
    continue;

    case '^':     /* Single-byte metacharacters */
    case '.':
    case '$':
    length++;
    lastitemlength = 1;
    continue;

    case '*':            /* These repeats won't be after brackets; */
    case '+':            /* those are handled separately */
    case '?':
    length++;
    goto POSESSIVE;      /* A few lines below */

    /* This covers the cases of braced repeats after a single char, metachar,
    class, or back reference. */

    case '{':
    if (!is_counted_repeat(ptr+1)) goto NORMAL_CHAR;
    ptr = read_repeat_counts(ptr+1, &min, &max, errorptr);
    if (*errorptr != NULL) goto PCRE_ERROR_RETURN;

    /* These special cases just insert one extra opcode */

    if ((min == 0 && (max == 1 || max == -1)) ||
      (min == 1 && max == -1))
        length++;

    /* These cases might insert additional copies of a preceding character. */

    else
      {
      if (min != 1)
        {
        length -= lastitemlength;   /* Uncount the original char or metachar */
        if (min > 0) length += 3 + lastitemlength;
        }
      length += lastitemlength + ((max > 0)? 3 : 1);
      }

    if (ptr[1] == '?') ptr++;      /* Needs no extra length */

    POSESSIVE:                     /* Test for possessive quantifier */
    if (ptr[1] == '+')
      {
      ptr++;
      length += 2 + 2*LINK_SIZE;   /* Allow for atomic brackets */
      }
    continue;

    /* An alternation contains an offset to the next branch or ket. If any ims
    options changed in the previous branch(es), and/or if we are in a
    lookbehind assertion, extra space will be needed at the start of the
    branch. This is handled by branch_extra. */

    case '|':
    length += 1 + LINK_SIZE + branch_extra;
    continue;

    /* A character class uses 33 characters provided that all the character
    values are less than 256. Otherwise, it uses a bit map for low valued
    characters, and individual items for others. Don't worry about character
    types that aren't allowed in classes - they'll get picked up during the
    compile. A character class that contains only one single-byte character
    uses 2 or 3 bytes, depending on whether it is negated or not. Notice this
    where we can. (In UTF-8 mode we can do this only for chars < 128.) */

    case '[':
    if (*(++ptr) == '^')
      {
      class_optcount = 10;  /* Greater than one */
      ptr++;
      }
    else class_optcount = 0;

#ifdef SUPPORT_UTF8
    class_utf8 = FALSE;
#endif

    /* Written as a "do" so that an initial ']' is taken as data */

    if (*ptr != 0) do
      {
      /* Inside \Q...\E everything is literal except \E */

      if (inescq)
        {
        if (*ptr != '\\' || ptr[1] != 'E') goto GET_ONE_CHARACTER;
        inescq = FALSE;
        ptr += 1;
        continue;
        }

      /* Outside \Q...\E, check for escapes */

      if (*ptr == '\\')
        {
        c = check_escape(&ptr, errorptr, bracount, options, TRUE);
        if (*errorptr != NULL) goto PCRE_ERROR_RETURN;

        /* \b is backspace inside a class; \X is literal */

        if (-c == ESC_b) c = '\b';
        else if (-c == ESC_X) c = 'X';

        /* \Q enters quoting mode */

        else if (-c == ESC_Q)
          {
          inescq = TRUE;
          continue;
          }

        /* Handle escapes that turn into characters */

        if (c >= 0) goto NON_SPECIAL_CHARACTER;

        /* Escapes that are meta-things. The normal ones just affect the
        bit map, but Unicode properties require an XCLASS extended item. */

        else
          {
          class_optcount = 10;         /* \d, \s etc; make sure > 1 */
#ifdef SUPPORT_UTF8
          if (-c == ESC_p || -c == ESC_P)
            {
            if (!class_utf8)
              {
              class_utf8 = TRUE;
              length += LINK_SIZE + 2;
              }
            length += 2;
            }
#endif
          }
        }

      /* Check the syntax for POSIX stuff. The bits we actually handle are
      checked during the real compile phase. */

      else if (*ptr == '[' && check_posix_syntax(ptr, &ptr, &compile_block))
        {
        ptr++;
        class_optcount = 10;    /* Make sure > 1 */
        }

      /* Anything else increments the possible optimization count. We have to
      detect ranges here so that we can compute the number of extra ranges for
      caseless wide characters when UCP support is available. If there are wide
      characters, we are going to have to use an XCLASS, even for single
      characters. */

      else
        {
        int d;

        GET_ONE_CHARACTER:

#ifdef SUPPORT_UTF8
        if (utf8)
          {
          int extra = 0;
          GETCHARLEN(c, ptr, extra);
          ptr += extra;
          }
        else c = *ptr;
#else
        c = *ptr;
#endif

        /* Come here from handling \ above when it escapes to a char value */

        NON_SPECIAL_CHARACTER:
        class_optcount++;

        d = -1;
        if (ptr[1] == '-')
          {
          uschar const *hyptr = ptr++;
          if (ptr[1] == '\\')
            {
            ptr++;
            d = check_escape(&ptr, errorptr, bracount, options, TRUE);
            if (*errorptr != NULL) goto PCRE_ERROR_RETURN;
            if (-d == ESC_b) d = '\b';        /* backspace */
            else if (-d == ESC_X) d = 'X';    /* literal X in a class */
            }
          else if (ptr[1] != 0 && ptr[1] != ']')
            {
            ptr++;
#ifdef SUPPORT_UTF8
            if (utf8)
              {
              int extra = 0;
              GETCHARLEN(d, ptr, extra);
              ptr += extra;
              }
            else
#endif
            d = *ptr;
            }
          if (d < 0) ptr = hyptr;      /* go back to hyphen as data */
          }

        /* If d >= 0 we have a range. In UTF-8 mode, if the end is > 255, or >
        127 for caseless matching, we will need to use an XCLASS. */

        if (d >= 0)
          {
          class_optcount = 10;     /* Ensure > 1 */
          if (d < c)
            {
            *errorptr = ERR8;
            goto PCRE_ERROR_RETURN;
            }

#ifdef SUPPORT_UTF8
          if (utf8 && (d > 255 || ((options & PCRE_CASELESS) != 0 && d > 127)))
            {
            uschar buffer[6];
            if (!class_utf8)         /* Allow for XCLASS overhead */
              {
              class_utf8 = TRUE;
              length += LINK_SIZE + 2;
              }

#ifdef SUPPORT_UCP
            /* If we have UCP support, find out how many extra ranges are
            needed to map the other case of characters within this range. We
            have to mimic the range optimization here, because extending the
            range upwards might push d over a boundary that makes is use
            another byte in the UTF-8 representation. */

            if ((options & PCRE_CASELESS) != 0)
              {
              int occ, ocd;
              int cc = c;
              int origd = d;
              while (get_othercase_range(&cc, origd, &occ, &ocd))
                {
                if (occ >= c && ocd <= d) continue;   /* Skip embedded */

                if (occ < c  && ocd >= c - 1)  /* Extend the basic range */
                  {                            /* if there is overlap,   */
                  c = occ;                     /* noting that if occ < c */
                  continue;                    /* we can't have ocd > d  */
                  }                            /* because a subrange is  */
                if (ocd > d && occ <= d + 1)   /* always shorter than    */
                  {                            /* the basic range.       */
                  d = ocd;
                  continue;
                  }

                /* An extra item is needed */

                length += 1 + ord2utf8(occ, buffer) +
                  ((occ == ocd)? 0 : ord2utf8(ocd, buffer));
                }
              }
#endif  /* SUPPORT_UCP */

            /* The length of the (possibly extended) range */

            length += 1 + ord2utf8(c, buffer) + ord2utf8(d, buffer);
            }
#endif  /* SUPPORT_UTF8 */

          }

        /* We have a single character. There is nothing to be done unless we
        are in UTF-8 mode. If the char is > 255, or 127 when caseless, we must
        allow for an XCL_SINGLE item, doubled for caselessness if there is UCP
        support. */

        else
          {
#ifdef SUPPORT_UTF8
          if (utf8 && (c > 255 || ((options & PCRE_CASELESS) != 0 && c > 127)))
            {
            uschar buffer[6];
            class_optcount = 10;     /* Ensure > 1 */
            if (!class_utf8)         /* Allow for XCLASS overhead */
              {
              class_utf8 = TRUE;
              length += LINK_SIZE + 2;
              }
#ifdef SUPPORT_UCP
            length += (((options & PCRE_CASELESS) != 0)? 2 : 1) *
              (1 + ord2utf8(c, buffer));
#else   /* SUPPORT_UCP */
            length += 1 + ord2utf8(c, buffer);
#endif  /* SUPPORT_UCP */
            }
#endif  /* SUPPORT_UTF8 */
          }
        }
      }
    while (*(++ptr) != 0 && (inescq || *ptr != ']')); /* Concludes "do" above */

    if (*ptr == 0)                          /* Missing terminating ']' */
      {
      *errorptr = ERR6;
      goto PCRE_ERROR_RETURN;
      }

    /* We can optimize when there was only one optimizable character. Repeats
    for positive and negated single one-byte chars are handled by the general
    code. Here, we handle repeats for the class opcodes. */

    if (class_optcount == 1) length += 3; else
      {
      length += 33;

      /* A repeat needs either 1 or 5 bytes. If it is a possessive quantifier,
      we also need extra for wrapping the whole thing in a sub-pattern. */

      if (*ptr != 0 && ptr[1] == '{' && is_counted_repeat(ptr+2))
        {
        ptr = read_repeat_counts(ptr+2, &min, &max, errorptr);
        if (*errorptr != NULL) goto PCRE_ERROR_RETURN;
        if ((min == 0 && (max == 1 || max == -1)) ||
          (min == 1 && max == -1))
            length++;
        else length += 5;
        if (ptr[1] == '+')
          {
          ptr++;
          length += 2 + 2*LINK_SIZE;
          }
        else if (ptr[1] == '?') ptr++;
        }
      }
    continue;

    /* Brackets may be genuine groups or special things */

    case '(':
    branch_newextra = 0;
    bracket_length = 1 + LINK_SIZE;

    /* Handle special forms of bracket, which all start (? */

    if (ptr[1] == '?')
      {
      int set, unset;
      int *optset;

      switch (c = ptr[2])
        {
        /* Skip over comments entirely */
        case '#':
        ptr += 3;
        while (*ptr != 0 && *ptr != ')') ptr++;
        if (*ptr == 0)
          {
          *errorptr = ERR18;
          goto PCRE_ERROR_RETURN;
          }
        continue;

        /* Non-referencing groups and lookaheads just move the pointer on, and
        then behave like a non-special bracket, except that they don't increment
        the count of extracting brackets. Ditto for the "once only" bracket,
        which is in Perl from version 5.005. */

        case ':':
        case '=':
        case '!':
        case '>':
        ptr += 2;
        break;

        /* (?R) specifies a recursive call to the regex, which is an extension
        to provide the facility which can be obtained by (?p{perl-code}) in
        Perl 5.6. In Perl 5.8 this has become (??{perl-code}).

        From PCRE 4.00, items such as (?3) specify subroutine-like "calls" to
        the appropriate numbered brackets. This includes both recursive and
        non-recursive calls. (?R) is now synonymous with (?0). */

        case 'R':
        ptr++;

        case '0': case '1': case '2': case '3': case '4':
        case '5': case '6': case '7': case '8': case '9':
        ptr += 2;
        if (c != 'R')
          while ((digitab[*(++ptr)] & ctype_digit) != 0);
        if (*ptr != ')')
          {
          *errorptr = ERR29;
          goto PCRE_ERROR_RETURN;
          }
        length += 1 + LINK_SIZE;

        /* If this item is quantified, it will get wrapped inside brackets so
        as to use the code for quantified brackets. We jump down and use the
        code that handles this for real brackets. */

        if (ptr[1] == '+' || ptr[1] == '*' || ptr[1] == '?' || ptr[1] == '{')
          {
          length += 2 + 2 * LINK_SIZE;       /* to make bracketed */
          duplength = 5 + 3 * LINK_SIZE;
          goto HANDLE_QUANTIFIED_BRACKETS;
          }
        continue;

        /* (?C) is an extension which provides "callout" - to provide a bit of
        the functionality of the Perl (?{...}) feature. An optional number may
        follow (default is zero). */

        case 'C':
        ptr += 2;
        while ((digitab[*(++ptr)] & ctype_digit) != 0);
        if (*ptr != ')')
          {
          *errorptr = ERR39;
          goto PCRE_ERROR_RETURN;
          }
        length += 2 + 2*LINK_SIZE;
        continue;

        /* Named subpatterns are an extension copied from Python */

        case 'P':
        ptr += 3;
        if (*ptr == '<')
          {
          const uschar *p;    /* Don't amalgamate; some compilers */
          p = ++ptr;          /* grumble at autoincrement in declaration */
          while ((compile_block.ctypes[*ptr] & ctype_word) != 0) ptr++;
          if (*ptr != '>')
            {
            *errorptr = ERR42;
            goto PCRE_ERROR_RETURN;
            }
          name_count++;
          if (ptr - p > max_name_size) max_name_size = (ptr - p);
          break;
          }

        if (*ptr == '=' || *ptr == '>')
          {
          while ((compile_block.ctypes[*(++ptr)] & ctype_word) != 0);
          if (*ptr != ')')
            {
            *errorptr = ERR42;
            goto PCRE_ERROR_RETURN;
            }
          break;
          }

        /* Unknown character after (?P */

        *errorptr = ERR41;
        goto PCRE_ERROR_RETURN;

        /* Lookbehinds are in Perl from version 5.005 */

        case '<':
        ptr += 3;
        if (*ptr == '=' || *ptr == '!')
          {
          branch_newextra = 1 + LINK_SIZE;
          length += 1 + LINK_SIZE;         /* For the first branch */
          break;
          }
        *errorptr = ERR24;
        goto PCRE_ERROR_RETURN;

        /* Conditionals are in Perl from version 5.005. The bracket must either
        be followed by a number (for bracket reference) or by an assertion
        group, or (a PCRE extension) by 'R' for a recursion test. */

        case '(':
        if (ptr[3] == 'R' && ptr[4] == ')')
          {
          ptr += 4;
          length += 3;
          }
        else if ((digitab[ptr[3]] & ctype_digit) != 0)
          {
          ptr += 4;
          length += 3;
          while ((digitab[*ptr] & ctype_digit) != 0) ptr++;
          if (*ptr != ')')
            {
            *errorptr = ERR26;
            goto PCRE_ERROR_RETURN;
            }
          }
        else   /* An assertion must follow */
          {
          ptr++;   /* Can treat like ':' as far as spacing is concerned */
          if (ptr[2] != '?' ||
             (ptr[3] != '=' && ptr[3] != '!' && ptr[3] != '<') )
            {
            ptr += 2;    /* To get right offset in message */
            *errorptr = ERR28;
            goto PCRE_ERROR_RETURN;
            }
          }
        break;

        /* Else loop checking valid options until ) is met. Anything else is an
        error. If we are without any brackets, i.e. at top level, the settings
        act as if specified in the options, so massage the options immediately.
        This is for backward compatibility with Perl 5.004. */

        default:
        set = unset = 0;
        optset = &set;
        ptr += 2;

        for (;; ptr++)
          {
          c = *ptr;
          switch (c)
            {
            case 'i':
            *optset |= PCRE_CASELESS;
            continue;

            case 'm':
            *optset |= PCRE_MULTILINE;
            continue;

            case 's':
            *optset |= PCRE_DOTALL;
            continue;

            case 'x':
            *optset |= PCRE_EXTENDED;
            continue;

            case 'X':
            *optset |= PCRE_EXTRA;
            continue;

            case 'U':
            *optset |= PCRE_UNGREEDY;
            continue;

            case '-':
            optset = &unset;
            continue;

            /* A termination by ')' indicates an options-setting-only item; if
            this is at the very start of the pattern (indicated by item_count
            being zero), we use it to set the global options. This is helpful
            when analyzing the pattern for first characters, etc. Otherwise
            nothing is done here and it is handled during the compiling
            process.

            [Historical note: Up to Perl 5.8, options settings at top level
            were always global settings, wherever they appeared in the pattern.
            That is, they were equivalent to an external setting. From 5.8
            onwards, they apply only to what follows (which is what you might
            expect).] */

            case ')':
            if (item_count == 0)
              {
              options = (options | set) & (~unset);
              set = unset = 0;     /* To save length */
              item_count--;        /* To allow for several */
              }

            /* Fall through */

            /* A termination by ':' indicates the start of a nested group with
            the given options set. This is again handled at compile time, but
            we must allow for compiled space if any of the ims options are
            set. We also have to allow for resetting space at the end of
            the group, which is why 4 is added to the length and not just 2.
            If there are several changes of options within the same group, this
            will lead to an over-estimate on the length, but this shouldn't
            matter very much. We also have to allow for resetting options at
            the start of any alternations, which we do by setting
            branch_newextra to 2. Finally, we record whether the case-dependent
            flag ever changes within the regex. This is used by the "required
            character" code. */

            case ':':
            if (((set|unset) & PCRE_IMS) != 0)
              {
              length += 4;
              branch_newextra = 2;
              if (((set|unset) & PCRE_CASELESS) != 0) options |= PCRE_ICHANGED;
              }
            goto END_OPTIONS;

            /* Unrecognized option character */

            default:
            *errorptr = ERR12;
            goto PCRE_ERROR_RETURN;
            }
          }

        /* If we hit a closing bracket, that's it - this is a freestanding
        option-setting. We need to ensure that branch_extra is updated if
        necessary. The only values branch_newextra can have here are 0 or 2.
        If the value is 2, then branch_extra must either be 2 or 5, depending
        on whether this is a lookbehind group or not. */

        END_OPTIONS:
        if (c == ')')
          {
          if (branch_newextra == 2 &&
              (branch_extra == 0 || branch_extra == 1+LINK_SIZE))
            branch_extra += branch_newextra;
          continue;
          }

        /* If options were terminated by ':' control comes here. Fall through
        to handle the group below. */
        }
      }

    /* Extracting brackets must be counted so we can process escapes in a
    Perlish way. If the number exceeds EXTRACT_BASIC_MAX we are going to
    need an additional 3 bytes of store per extracting bracket. However, if
    PCRE_NO_AUTO)CAPTURE is set, unadorned brackets become non-capturing, so we
    must leave the count alone (it will aways be zero). */

    else if ((options & PCRE_NO_AUTO_CAPTURE) == 0)
      {
      bracount++;
      if (bracount > EXTRACT_BASIC_MAX) bracket_length += 3;
      }

    /* Save length for computing whole length at end if there's a repeat that
    requires duplication of the group. Also save the current value of
    branch_extra, and start the new group with the new value. If non-zero, this
    will either be 2 for a (?imsx: group, or 3 for a lookbehind assertion. */

    if (brastackptr >= sizeof(brastack)/sizeof(int))
      {
      *errorptr = ERR19;
      goto PCRE_ERROR_RETURN;
      }

    bralenstack[brastackptr] = branch_extra;
    branch_extra = branch_newextra;

    brastack[brastackptr++] = length;
    length += bracket_length;
    continue;

    /* Handle ket. Look for subsequent max/min; for certain sets of values we
    have to replicate this bracket up to that many times. If brastackptr is
    0 this is an unmatched bracket which will generate an error, but take care
    not to try to access brastack[-1] when computing the length and restoring
    the branch_extra value. */

    case ')':
    length += 1 + LINK_SIZE;
    if (brastackptr > 0)
      {
      duplength = length - brastack[--brastackptr];
      branch_extra = bralenstack[brastackptr];
      }
    else duplength = 0;

    /* The following code is also used when a recursion such as (?3) is
    followed by a quantifier, because in that case, it has to be wrapped inside
    brackets so that the quantifier works. The value of duplength must be
    set before arrival. */

    HANDLE_QUANTIFIED_BRACKETS:

    /* Leave ptr at the final char; for read_repeat_counts this happens
    automatically; for the others we need an increment. */

    if ((c = ptr[1]) == '{' && is_counted_repeat(ptr+2))
      {
      ptr = read_repeat_counts(ptr+2, &min, &max, errorptr);
      if (*errorptr != NULL) goto PCRE_ERROR_RETURN;
      }
    else if (c == '*') { min = 0; max = -1; ptr++; }
    else if (c == '+') { min = 1; max = -1; ptr++; }
    else if (c == '?') { min = 0; max = 1;  ptr++; }
    else { min = 1; max = 1; }

    /* If the minimum is zero, we have to allow for an OP_BRAZERO before the
    group, and if the maximum is greater than zero, we have to replicate
    maxval-1 times; each replication acquires an OP_BRAZERO plus a nesting
    bracket set. */

    if (min == 0)
      {
      length++;
      if (max > 0) length += (max - 1) * (duplength + 3 + 2*LINK_SIZE);
      }

    /* When the minimum is greater than zero, we have to replicate up to
    minval-1 times, with no additions required in the copies. Then, if there
    is a limited maximum we have to replicate up to maxval-1 times allowing
    for a BRAZERO item before each optional copy and nesting brackets for all
    but one of the optional copies. */

    else
      {
      length += (min - 1) * duplength;
      if (max > min)   /* Need this test as max=-1 means no limit */
        length += (max - min) * (duplength + 3 + 2*LINK_SIZE)
          - (2 + 2*LINK_SIZE);
      }

    /* Allow space for once brackets for "possessive quantifier" */

    if (ptr[1] == '+')
      {
      ptr++;
      length += 2 + 2*LINK_SIZE;
      }
    continue;

    /* Non-special character. It won't be space or # in extended mode, so it is
    always a genuine character. If we are in a \Q...\E sequence, check for the
    end; if not, we have a literal. */

    default:
    NORMAL_CHAR:

    if (inescq && c == '\\' && ptr[1] == 'E')
      {
      inescq = FALSE;
      ptr++;
      continue;
      }

    length += 2;          /* For a one-byte character */
    lastitemlength = 1;   /* Default length of last item for repeats */

    /* In UTF-8 mode, check for additional bytes. */

#ifdef SUPPORT_UTF8
    if (utf8 && (c & 0xc0) == 0xc0)
      {
      while ((ptr[1] & 0xc0) == 0x80)         /* Can't flow over the end */
        {                                     /* because the end is marked */
        lastitemlength++;                     /* by a zero byte. */
        length++;
        ptr++;
        }
      }
#endif

    continue;
    }
  }

length += 2 + LINK_SIZE;    /* For final KET and END */

if ((options & PCRE_AUTO_CALLOUT) != 0)
  length += 2 + 2*LINK_SIZE;  /* For final callout */

if (length > MAX_PATTERN_SIZE)
  {
  *errorptr = ERR20;
  return NULL;
  }

/* Compute the size of data block needed and get it, either from malloc or
externally provided function. */

size = length + sizeof(real_pcre) + name_count * (max_name_size + 3);
re = (real_pcre *)(pcre_malloc)(size);

if (re == NULL)
  {
  *errorptr = ERR21;
  return NULL;
  }

/* Put in the magic number, and save the sizes, options, and character table
pointer. NULL is used for the default character tables. The nullpad field is at
the end; it's there to help in the case when a regex compiled on a system with
4-byte pointers is run on another with 8-byte pointers. */

re->magic_number = MAGIC_NUMBER;
re->size = size;
re->options = options;
re->dummy1 = re->dummy2 = 0;
re->name_table_offset = sizeof(real_pcre);
re->name_entry_size = max_name_size + 3;
re->name_count = name_count;
re->tables = (tables == pcre_default_tables)? NULL : tables;
re->nullpad = NULL;

/* The starting points of the name/number translation table and of the code are
passed around in the compile data block. */

compile_block.names_found = 0;
compile_block.name_entry_size = max_name_size + 3;
compile_block.name_table = (uschar *)re + re->name_table_offset;
codestart = compile_block.name_table + re->name_entry_size * re->name_count;
compile_block.start_code = codestart;
compile_block.start_pattern = (const uschar *)pattern;
compile_block.req_varyopt = 0;
compile_block.nopartial = FALSE;

/* Set up a starting, non-extracting bracket, then compile the expression. On
error, *errorptr will be set non-NULL, so we don't need to look at the result
of the function here. */

ptr = (const uschar *)pattern;
code = (uschar *)codestart;
*code = OP_BRA;
bracount = 0;
(void)compile_regex(options, options & PCRE_IMS, &bracount, &code, &ptr,
  errorptr, FALSE, 0, &firstbyte, &reqbyte, NULL, &compile_block);
re->top_bracket = bracount;
re->top_backref = compile_block.top_backref;

if (compile_block.nopartial) re->options |= PCRE_NOPARTIAL;

/* If not reached end of pattern on success, there's an excess bracket. */

if (*errorptr == NULL && *ptr != 0) *errorptr = ERR22;

/* Fill in the terminating state and check for disastrous overflow, but
if debugging, leave the test till after things are printed out. */

*code++ = OP_END;

#ifndef DEBUG
if (code - codestart > length) *errorptr = ERR23;
#endif

/* Give an error if there's back reference to a non-existent capturing
subpattern. */

if (re->top_backref > re->top_bracket) *errorptr = ERR15;

/* Failed to compile, or error while post-processing */

if (*errorptr != NULL)
  {
  (pcre_free)(re);
  PCRE_ERROR_RETURN:
  *erroroffset = ptr - (const uschar *)pattern;
  return NULL;
  }

/* If the anchored option was not passed, set the flag if we can determine that
the pattern is anchored by virtue of ^ characters or \A or anything else (such
as starting with .* when DOTALL is set).

Otherwise, if we know what the first character has to be, save it, because that
speeds up unanchored matches no end. If not, see if we can set the
PCRE_STARTLINE flag. This is helpful for multiline matches when all branches
start with ^. and also when all branches start with .* for non-DOTALL matches.
*/

if ((options & PCRE_ANCHORED) == 0)
  {
  int temp_options = options;
  if (is_anchored(codestart, &temp_options, 0, compile_block.backref_map))
    re->options |= PCRE_ANCHORED;
  else
    {
    if (firstbyte < 0)
      firstbyte = find_firstassertedchar(codestart, &temp_options, FALSE);
    if (firstbyte >= 0)   /* Remove caseless flag for non-caseable chars */
      {
      int ch = firstbyte & 255;
      re->first_byte = ((firstbyte & REQ_CASELESS) != 0 &&
         compile_block.fcc[ch] == ch)? ch : firstbyte;
      re->options |= PCRE_FIRSTSET;
      }
    else if (is_startline(codestart, 0, compile_block.backref_map))
      re->options |= PCRE_STARTLINE;
    }
  }

/* For an anchored pattern, we use the "required byte" only if it follows a
variable length item in the regex. Remove the caseless flag for non-caseable
bytes. */

if (reqbyte >= 0 &&
     ((re->options & PCRE_ANCHORED) == 0 || (reqbyte & REQ_VARY) != 0))
  {
  int ch = reqbyte & 255;
  re->req_byte = ((reqbyte & REQ_CASELESS) != 0 &&
    compile_block.fcc[ch] == ch)? (reqbyte & ~REQ_CASELESS) : reqbyte;
  re->options |= PCRE_REQCHSET;
  }

/* Print out the compiled data for debugging */

#ifdef DEBUG

printf("Length = %d top_bracket = %d top_backref = %d\n",
  length, re->top_bracket, re->top_backref);

if (re->options != 0)
  {
  printf("%s%s%s%s%s%s%s%s%s%s\n",
    ((re->options & PCRE_NOPARTIAL) != 0)? "nopartial " : "",
    ((re->options & PCRE_ANCHORED) != 0)? "anchored " : "",
    ((re->options & PCRE_CASELESS) != 0)? "caseless " : "",
    ((re->options & PCRE_ICHANGED) != 0)? "case state changed " : "",
    ((re->options & PCRE_EXTENDED) != 0)? "extended " : "",
    ((re->options & PCRE_MULTILINE) != 0)? "multiline " : "",
    ((re->options & PCRE_DOTALL) != 0)? "dotall " : "",
    ((re->options & PCRE_DOLLAR_ENDONLY) != 0)? "endonly " : "",
    ((re->options & PCRE_EXTRA) != 0)? "extra " : "",
    ((re->options & PCRE_UNGREEDY) != 0)? "ungreedy " : "");
  }

if ((re->options & PCRE_FIRSTSET) != 0)
  {
  int ch = re->first_byte & 255;
  const char *caseless = ((re->first_byte & REQ_CASELESS) == 0)? "" : " (caseless)";
  if (isprint(ch)) printf("First char = %c%s\n", ch, caseless);
    else printf("First char = \\x%02x%s\n", ch, caseless);
  }

if ((re->options & PCRE_REQCHSET) != 0)
  {
  int ch = re->req_byte & 255;
  const char *caseless = ((re->req_byte & REQ_CASELESS) == 0)? "" : " (caseless)";
  if (isprint(ch)) printf("Req char = %c%s\n", ch, caseless);
    else printf("Req char = \\x%02x%s\n", ch, caseless);
  }

print_internals(re, stdout);

/* This check is done here in the debugging case so that the code that
was compiled can be seen. */

if (code - codestart > length)
  {
  *errorptr = ERR23;
  (pcre_free)(re);
  *erroroffset = ptr - (uschar *)pattern;
  return NULL;
  }
#endif

return (pcre *)re;
}


/*************************************************
*          Match a back-reference                *
*************************************************/

/* If a back reference hasn't been set, the length that is passed is greater
than the number of characters left in the string, so the match fails.

Arguments:
  offset      index into the offset vector
  eptr        points into the subject
  length      length to be matched
  md          points to match data block
  ims         the ims flags

Returns:      TRUE if matched
*/

static BOOL
match_ref(int offset, register const uschar *eptr, int length, match_data *md,
  unsigned long int ims)
{
const uschar *p = md->start_subject + md->offset_vector[offset];

#ifdef DEBUG
if (eptr >= md->end_subject)
  printf("matching subject <null>");
else
  {
  printf("matching subject ");
  pchars(eptr, length, TRUE, md);
  }
printf(" against backref ");
pchars(p, length, FALSE, md);
printf("\n");
#endif

/* Always fail if not enough characters left */

if (length > md->end_subject - eptr) return FALSE;

/* Separate the caselesss case for speed */

if ((ims & PCRE_CASELESS) != 0)
  {
  while (length-- > 0)
    if (md->lcc[*p++] != md->lcc[*eptr++]) return FALSE;
  }
else
  { while (length-- > 0) if (*p++ != *eptr++) return FALSE; }

return TRUE;
}


#ifdef SUPPORT_UTF8
/*************************************************
*       Match character against an XCLASS        *
*************************************************/

/* This function is called from within the XCLASS code below, to match a
character against an extended class which might match values > 255.

Arguments:
  c           the character
  data        points to the flag byte of the XCLASS data

Returns:      TRUE if character matches, else FALSE
*/

static BOOL
match_xclass(int c, const uschar *data)
{
int t;
BOOL negated = (*data & XCL_NOT) != 0;

/* Character values < 256 are matched against a bitmap, if one is present. If
not, we still carry on, because there may be ranges that start below 256 in the
additional data. */

if (c < 256)
  {
  if ((*data & XCL_MAP) != 0 && (data[1 + c/8] & (1 << (c&7))) != 0)
    return !negated;   /* char found */
  }

/* First skip the bit map if present. Then match against the list of Unicode
properties or large chars or ranges that end with a large char. We won't ever
encounter XCL_PROP or XCL_NOTPROP when UCP support is not compiled. */

if ((*data++ & XCL_MAP) != 0) data += 32;

while ((t = *data++) != XCL_END)
  {
  int x, y;
  if (t == XCL_SINGLE)
    {
    GETCHARINC(x, data);
    if (c == x) return !negated;
    }
  else if (t == XCL_RANGE)
    {
    GETCHARINC(x, data);
    GETCHARINC(y, data);
    if (c >= x && c <= y) return !negated;
    }

#ifdef SUPPORT_UCP
  else  /* XCL_PROP & XCL_NOTPROP */
    {
    int chartype, othercase;
    int rqdtype = *data++;
    int category = ucp_findchar(c, &chartype, &othercase);
    if (rqdtype >= 128)
      {
      if ((rqdtype - 128 == category) == (t == XCL_PROP)) return !negated;
      }
    else
      {
      if ((rqdtype == chartype) == (t == XCL_PROP)) return !negated;
      }
    }
#endif  /* SUPPORT_UCP */
  }

return negated;   /* char did not match */
}
#endif


/***************************************************************************
****************************************************************************
                   RECURSION IN THE match() FUNCTION

The match() function is highly recursive. Some regular expressions can cause
it to recurse thousands of times. I was writing for Unix, so I just let it
call itself recursively. This uses the stack for saving everything that has
to be saved for a recursive call. On Unix, the stack can be large, and this
works fine.

It turns out that on non-Unix systems there are problems with programs that
use a lot of stack. (This despite the fact that every last chip has oodles
of memory these days, and techniques for extending the stack have been known
for decades.) So....

There is a fudge, triggered by defining NO_RECURSE, which avoids recursive
calls by keeping local variables that need to be preserved in blocks of memory
obtained from malloc instead instead of on the stack. Macros are used to
achieve this so that the actual code doesn't look very different to what it
always used to.
****************************************************************************
***************************************************************************/


/* These versions of the macros use the stack, as normal */

#ifndef NO_RECURSE
#define REGISTER register
#define RMATCH(rx,ra,rb,rc,rd,re,rf,rg) rx = match(ra,rb,rc,rd,re,rf,rg)
#define RRETURN(ra) return ra
#else


/* These versions of the macros manage a private stack on the heap. Note
that the rd argument of RMATCH isn't actually used. It's the md argument of
match(), which never changes. */

#define REGISTER

#define RMATCH(rx,ra,rb,rc,rd,re,rf,rg)\
  {\
  heapframe *newframe = (pcre_stack_malloc)(sizeof(heapframe));\
  if (setjmp(frame->Xwhere) == 0)\
    {\
    newframe->Xeptr = ra;\
    newframe->Xecode = rb;\
    newframe->Xoffset_top = rc;\
    newframe->Xims = re;\
    newframe->Xeptrb = rf;\
    newframe->Xflags = rg;\
    newframe->Xprevframe = frame;\
    frame = newframe;\
    DPRINTF(("restarting from line %d\n", __LINE__));\
    goto HEAP_RECURSE;\
    }\
  else\
    {\
    DPRINTF(("longjumped back to line %d\n", __LINE__));\
    frame = md->thisframe;\
    rx = frame->Xresult;\
    }\
  }

#define RRETURN(ra)\
  {\
  heapframe *newframe = frame;\
  frame = newframe->Xprevframe;\
  (pcre_stack_free)(newframe);\
  if (frame != NULL)\
    {\
    frame->Xresult = ra;\
    md->thisframe = frame;\
    longjmp(frame->Xwhere, 1);\
    }\
  return ra;\
  }


/* Structure for remembering the local variables in a private frame */

typedef struct heapframe {
  struct heapframe *Xprevframe;

  /* Function arguments that may change */

  const uschar *Xeptr;
  const uschar *Xecode;
  int Xoffset_top;
  long int Xims;
  eptrblock *Xeptrb;
  int Xflags;

  /* Function local variables */

  const uschar *Xcallpat;
  const uschar *Xcharptr;
  const uschar *Xdata;
  const uschar *Xnext;
  const uschar *Xpp;
  const uschar *Xprev;
  const uschar *Xsaved_eptr;

  recursion_info Xnew_recursive;

  BOOL Xcur_is_word;
  BOOL Xcondition;
  BOOL Xminimize;
  BOOL Xprev_is_word;

  unsigned long int Xoriginal_ims;

#ifdef SUPPORT_UCP
  int Xprop_type;
  int Xprop_fail_result;
  int Xprop_category;
  int Xprop_chartype;
  int Xprop_othercase;
  int Xprop_test_against;
  int *Xprop_test_variable;
#endif

  int Xctype;
  int Xfc;
  int Xfi;
  int Xlength;
  int Xmax;
  int Xmin;
  int Xnumber;
  int Xoffset;
  int Xop;
  int Xsave_capture_last;
  int Xsave_offset1, Xsave_offset2, Xsave_offset3;
  int Xstacksave[REC_STACK_SAVE_MAX];

  eptrblock Xnewptrb;

  /* Place to pass back result, and where to jump back to */

  int  Xresult;
  jmp_buf Xwhere;

} heapframe;

#endif


/***************************************************************************
***************************************************************************/


/*************************************************
*         Match from current position            *
*************************************************/

/* On entry ecode points to the first opcode, and eptr to the first character
in the subject string, while eptrb holds the value of eptr at the start of the
last bracketed group - used for breaking infinite loops matching zero-length
strings. This function is called recursively in many circumstances. Whenever it
returns a negative (error) response, the outer incarnation must also return the
same response.

Performance note: It might be tempting to extract commonly used fields from the
md structure (e.g. utf8, end_subject) into individual variables to improve
performance. Tests using gcc on a SPARC disproved this; in the first case, it
made performance worse.

Arguments:
   eptr        pointer in subject
   ecode       position in code
   offset_top  current top pointer
   md          pointer to "static" info for the match
   ims         current /i, /m, and /s options
   eptrb       pointer to chain of blocks containing eptr at start of
                 brackets - for testing for empty matches
   flags       can contain
                 match_condassert - this is an assertion condition
                 match_isgroup - this is the start of a bracketed group

Returns:       MATCH_MATCH if matched            )  these values are >= 0
               MATCH_NOMATCH if failed to match  )
               a negative PCRE_ERROR_xxx value if aborted by an error condition
                 (e.g. stopped by recursion limit)
*/

static int
match(REGISTER const uschar *eptr, REGISTER const uschar *ecode,
  int offset_top, match_data *md, unsigned long int ims, eptrblock *eptrb,
  int flags)
{
/* These variables do not need to be preserved over recursion in this function,
so they can be ordinary variables in all cases. Mark them with "register"
because they are used a lot in loops. */

register int rrc;    /* Returns from recursive calls */
register int i;      /* Used for loops not involving calls to RMATCH() */
register int c;      /* Character values not kept over RMATCH() calls */

/* When recursion is not being used, all "local" variables that have to be
preserved over calls to RMATCH() are part of a "frame" which is obtained from
heap storage. Set up the top-level frame here; others are obtained from the
heap whenever RMATCH() does a "recursion". See the macro definitions above. */

#ifdef NO_RECURSE
heapframe *frame = (pcre_stack_malloc)(sizeof(heapframe));
frame->Xprevframe = NULL;            /* Marks the top level */

/* Copy in the original argument variables */

frame->Xeptr = eptr;
frame->Xecode = ecode;
frame->Xoffset_top = offset_top;
frame->Xims = ims;
frame->Xeptrb = eptrb;
frame->Xflags = flags;

/* This is where control jumps back to to effect "recursion" */

HEAP_RECURSE:

/* Macros make the argument variables come from the current frame */

#define eptr               frame->Xeptr
#define ecode              frame->Xecode
#define offset_top         frame->Xoffset_top
#define ims                frame->Xims
#define eptrb              frame->Xeptrb
#define flags              frame->Xflags

/* Ditto for the local variables */

#ifdef SUPPORT_UTF8
#define charptr            frame->Xcharptr
#endif
#define callpat            frame->Xcallpat
#define data               frame->Xdata
#define next               frame->Xnext
#define pp                 frame->Xpp
#define prev               frame->Xprev
#define saved_eptr         frame->Xsaved_eptr

#define new_recursive      frame->Xnew_recursive

#define cur_is_word        frame->Xcur_is_word
#define condition          frame->Xcondition
#define minimize           frame->Xminimize
#define prev_is_word       frame->Xprev_is_word

#define original_ims       frame->Xoriginal_ims

#ifdef SUPPORT_UCP
#define prop_type          frame->Xprop_type
#define prop_fail_result   frame->Xprop_fail_result
#define prop_category      frame->Xprop_category
#define prop_chartype      frame->Xprop_chartype
#define prop_othercase     frame->Xprop_othercase
#define prop_test_against  frame->Xprop_test_against
#define prop_test_variable frame->Xprop_test_variable
#endif

#define ctype              frame->Xctype
#define fc                 frame->Xfc
#define fi                 frame->Xfi
#define length             frame->Xlength
#define max                frame->Xmax
#define min                frame->Xmin
#define number             frame->Xnumber
#define offset             frame->Xoffset
#define op                 frame->Xop
#define save_capture_last  frame->Xsave_capture_last
#define save_offset1       frame->Xsave_offset1
#define save_offset2       frame->Xsave_offset2
#define save_offset3       frame->Xsave_offset3
#define stacksave          frame->Xstacksave

#define newptrb            frame->Xnewptrb

/* When recursion is being used, local variables are allocated on the stack and
get preserved during recursion in the normal way. In this environment, fi and
i, and fc and c, can be the same variables. */

#else
#define fi i
#define fc c


#ifdef SUPPORT_UTF8                /* Many of these variables are used ony */
const uschar *charptr;             /* small blocks of the code. My normal  */
#endif                             /* style of coding would have declared  */
const uschar *callpat;             /* them within each of those blocks.    */
const uschar *data;                /* However, in order to accommodate the */
const uschar *next;                /* version of this code that uses an    */
const uschar *pp;                  /* external "stack" implemented on the  */
const uschar *prev;                /* heap, it is easier to declare them   */
const uschar *saved_eptr;          /* all here, so the declarations can    */
                                   /* be cut out in a block. The only      */
recursion_info new_recursive;      /* declarations within blocks below are */
                                   /* for variables that do not have to    */
BOOL cur_is_word;                  /* be preserved over a recursive call   */
BOOL condition;                    /* to RMATCH().                         */
BOOL minimize;
BOOL prev_is_word;

unsigned long int original_ims;

#ifdef SUPPORT_UCP
int prop_type;
int prop_fail_result;
int prop_category;
int prop_chartype;
int prop_othercase;
int prop_test_against;
int *prop_test_variable;
#endif

int ctype;
int length;
int max;
int min;
int number;
int offset;
int op;
int save_capture_last;
int save_offset1, save_offset2, save_offset3;
int stacksave[REC_STACK_SAVE_MAX];

eptrblock newptrb;
#endif

/* These statements are here to stop the compiler complaining about unitialized
variables. */

#ifdef SUPPORT_UCP
prop_fail_result = 0;
prop_test_against = 0;
prop_test_variable = NULL;
#endif

/* OK, now we can get on with the real code of the function. Recursion is
specified by the macros RMATCH and RRETURN. When NO_RECURSE is *not* defined,
these just turn into a recursive call to match() and a "return", respectively.
However, RMATCH isn't like a function call because it's quite a complicated
macro. It has to be used in one particular way. This shouldn't, however, impact
performance when true recursion is being used. */

if (md->match_call_count++ >= md->match_limit) RRETURN(PCRE_ERROR_MATCHLIMIT);

original_ims = ims;    /* Save for resetting on ')' */

/* At the start of a bracketed group, add the current subject pointer to the
stack of such pointers, to be re-instated at the end of the group when we hit
the closing ket. When match() is called in other circumstances, we don't add to
this stack. */

if ((flags & match_isgroup) != 0)
  {
  newptrb.epb_prev = eptrb;
  newptrb.epb_saved_eptr = eptr;
  eptrb = &newptrb;
  }

/* Now start processing the operations. */

for (;;)
  {
  op = *ecode;
  minimize = FALSE;

  /* For partial matching, remember if we ever hit the end of the subject after
  matching at least one subject character. */

  if (md->partial &&
      eptr >= md->end_subject &&
      eptr > md->start_match)
    md->hitend = TRUE;

  /* Opening capturing bracket. If there is space in the offset vector, save
  the current subject position in the working slot at the top of the vector. We
  mustn't change the current values of the data slot, because they may be set
  from a previous iteration of this group, and be referred to by a reference
  inside the group.

  If the bracket fails to match, we need to restore this value and also the
  values of the final offsets, in case they were set by a previous iteration of
  the same bracket.

  If there isn't enough space in the offset vector, treat this as if it were a
  non-capturing bracket. Don't worry about setting the flag for the error case
  here; that is handled in the code for KET. */

  if (op > OP_BRA)
    {
    number = op - OP_BRA;

    /* For extended extraction brackets (large number), we have to fish out the
    number from a dummy opcode at the start. */

    if (number > EXTRACT_BASIC_MAX)
      number = GET2(ecode, 2+LINK_SIZE);
    offset = number << 1;

#ifdef DEBUG
    printf("start bracket %d subject=", number);
    pchars(eptr, 16, TRUE, md);
    printf("\n");
#endif

    if (offset < md->offset_max)
      {
      save_offset1 = md->offset_vector[offset];
      save_offset2 = md->offset_vector[offset+1];
      save_offset3 = md->offset_vector[md->offset_end - number];
      save_capture_last = md->capture_last;

      DPRINTF(("saving %d %d %d\n", save_offset1, save_offset2, save_offset3));
      md->offset_vector[md->offset_end - number] = eptr - md->start_subject;

      do
        {
        RMATCH(rrc, eptr, ecode + 1 + LINK_SIZE, offset_top, md, ims, eptrb,
          match_isgroup);
        if (rrc != MATCH_NOMATCH) RRETURN(rrc);
        md->capture_last = save_capture_last;
        ecode += GET(ecode, 1);
        }
      while (*ecode == OP_ALT);

      DPRINTF(("bracket %d failed\n", number));

      md->offset_vector[offset] = save_offset1;
      md->offset_vector[offset+1] = save_offset2;
      md->offset_vector[md->offset_end - number] = save_offset3;

      RRETURN(MATCH_NOMATCH);
      }

    /* Insufficient room for saving captured contents */

    else op = OP_BRA;
    }

  /* Other types of node can be handled by a switch */

  switch(op)
    {
    case OP_BRA:     /* Non-capturing bracket: optimized */
    DPRINTF(("start bracket 0\n"));
    do
      {
      RMATCH(rrc, eptr, ecode + 1 + LINK_SIZE, offset_top, md, ims, eptrb,
        match_isgroup);
      if (rrc != MATCH_NOMATCH) RRETURN(rrc);
      ecode += GET(ecode, 1);
      }
    while (*ecode == OP_ALT);
    DPRINTF(("bracket 0 failed\n"));
    RRETURN(MATCH_NOMATCH);

    /* Conditional group: compilation checked that there are no more than
    two branches. If the condition is false, skipping the first branch takes us
    past the end if there is only one branch, but that's OK because that is
    exactly what going to the ket would do. */

    case OP_COND:
    if (ecode[LINK_SIZE+1] == OP_CREF) /* Condition extract or recurse test */
      {
      offset = GET2(ecode, LINK_SIZE+2) << 1;  /* Doubled ref number */
      condition = (offset == CREF_RECURSE * 2)?
        (md->recursive != NULL) :
        (offset < offset_top && md->offset_vector[offset] >= 0);
      RMATCH(rrc, eptr, ecode + (condition?
        (LINK_SIZE + 4) : (LINK_SIZE + 1 + GET(ecode, 1))),
        offset_top, md, ims, eptrb, match_isgroup);
      RRETURN(rrc);
      }

    /* The condition is an assertion. Call match() to evaluate it - setting
    the final argument TRUE causes it to stop at the end of an assertion. */

    else
      {
      RMATCH(rrc, eptr, ecode + 1 + LINK_SIZE, offset_top, md, ims, NULL,
          match_condassert | match_isgroup);
      if (rrc == MATCH_MATCH)
        {
        ecode += 1 + LINK_SIZE + GET(ecode, LINK_SIZE+2);
        while (*ecode == OP_ALT) ecode += GET(ecode, 1);
        }
      else if (rrc != MATCH_NOMATCH)
        {
        RRETURN(rrc);         /* Need braces because of following else */
        }
      else ecode += GET(ecode, 1);
      RMATCH(rrc, eptr, ecode + 1 + LINK_SIZE, offset_top, md, ims, eptrb,
        match_isgroup);
      RRETURN(rrc);
      }
    /* Control never reaches here */

    /* Skip over conditional reference or large extraction number data if
    encountered. */

    case OP_CREF:
    case OP_BRANUMBER:
    ecode += 3;
    break;

    /* End of the pattern. If we are in a recursion, we should restore the
    offsets appropriately and continue from after the call. */

    case OP_END:
    if (md->recursive != NULL && md->recursive->group_num == 0)
      {
      recursion_info *rec = md->recursive;
      DPRINTF(("Hit the end in a (?0) recursion\n"));
      md->recursive = rec->prevrec;
      memmove(md->offset_vector, rec->offset_save,
        rec->saved_max * sizeof(int));
      md->start_match = rec->save_start;
      ims = original_ims;
      ecode = rec->after_call;
      break;
      }

    /* Otherwise, if PCRE_NOTEMPTY is set, fail if we have matched an empty
    string - backtracking will then try other alternatives, if any. */

    if (md->notempty && eptr == md->start_match) RRETURN(MATCH_NOMATCH);
    md->end_match_ptr = eptr;          /* Record where we ended */
    md->end_offset_top = offset_top;   /* and how many extracts were taken */
    RRETURN(MATCH_MATCH);

    /* Change option settings */

    case OP_OPT:
    ims = ecode[1];
    ecode += 2;
    DPRINTF(("ims set to %02lx\n", ims));
    break;

    /* Assertion brackets. Check the alternative branches in turn - the
    matching won't pass the KET for an assertion. If any one branch matches,
    the assertion is true. Lookbehind assertions have an OP_REVERSE item at the
    start of each branch to move the current point backwards, so the code at
    this level is identical to the lookahead case. */

    case OP_ASSERT:
    case OP_ASSERTBACK:
    do
      {
      RMATCH(rrc, eptr, ecode + 1 + LINK_SIZE, offset_top, md, ims, NULL,
        match_isgroup);
      if (rrc == MATCH_MATCH) break;
      if (rrc != MATCH_NOMATCH) RRETURN(rrc);
      ecode += GET(ecode, 1);
      }
    while (*ecode == OP_ALT);
    if (*ecode == OP_KET) RRETURN(MATCH_NOMATCH);

    /* If checking an assertion for a condition, return MATCH_MATCH. */

    if ((flags & match_condassert) != 0) RRETURN(MATCH_MATCH);

    /* Continue from after the assertion, updating the offsets high water
    mark, since extracts may have been taken during the assertion. */

    do ecode += GET(ecode,1); while (*ecode == OP_ALT);
    ecode += 1 + LINK_SIZE;
    offset_top = md->end_offset_top;
    continue;

    /* Negative assertion: all branches must fail to match */

    case OP_ASSERT_NOT:
    case OP_ASSERTBACK_NOT:
    do
      {
      RMATCH(rrc, eptr, ecode + 1 + LINK_SIZE, offset_top, md, ims, NULL,
        match_isgroup);
      if (rrc == MATCH_MATCH) RRETURN(MATCH_NOMATCH);
      if (rrc != MATCH_NOMATCH) RRETURN(rrc);
      ecode += GET(ecode,1);
      }
    while (*ecode == OP_ALT);

    if ((flags & match_condassert) != 0) RRETURN(MATCH_MATCH);

    ecode += 1 + LINK_SIZE;
    continue;

    /* Move the subject pointer back. This occurs only at the start of
    each branch of a lookbehind assertion. If we are too close to the start to
    move back, this match function fails. When working with UTF-8 we move
    back a number of characters, not bytes. */

    case OP_REVERSE:
#ifdef SUPPORT_UTF8
    if (md->utf8)
      {
      c = GET(ecode,1);
      for (i = 0; i < c; i++)
        {
        eptr--;
        if (eptr < md->start_subject) RRETURN(MATCH_NOMATCH);
        BACKCHAR(eptr)
        }
      }
    else
#endif

    /* No UTF-8 support, or not in UTF-8 mode: count is byte count */

      {
      eptr -= GET(ecode,1);
      if (eptr < md->start_subject) RRETURN(MATCH_NOMATCH);
      }

    /* Skip to next op code */

    ecode += 1 + LINK_SIZE;
    break;

    /* The callout item calls an external function, if one is provided, passing
    details of the match so far. This is mainly for debugging, though the
    function is able to force a failure. */

    case OP_CALLOUT:
    if (pcre_callout != NULL)
      {
      pcre_callout_block cb;
      cb.version          = 1;   /* Version 1 of the callout block */
      cb.callout_number   = ecode[1];
      cb.offset_vector    = md->offset_vector;
      cb.subject          = (const char *)md->start_subject;
      cb.subject_length   = md->end_subject - md->start_subject;
      cb.start_match      = md->start_match - md->start_subject;
      cb.current_position = eptr - md->start_subject;
      cb.pattern_position = GET(ecode, 2);
      cb.next_item_length = GET(ecode, 2 + LINK_SIZE);
      cb.capture_top      = offset_top/2;
      cb.capture_last     = md->capture_last;
      cb.callout_data     = md->callout_data;
      if ((rrc = (*pcre_callout)(&cb)) > 0) RRETURN(MATCH_NOMATCH);
      if (rrc < 0) RRETURN(rrc);
      }
    ecode += 2 + 2*LINK_SIZE;
    break;

    /* Recursion either matches the current regex, or some subexpression. The
    offset data is the offset to the starting bracket from the start of the
    whole pattern. (This is so that it works from duplicated subpatterns.)

    If there are any capturing brackets started but not finished, we have to
    save their starting points and reinstate them after the recursion. However,
    we don't know how many such there are (offset_top records the completed
    total) so we just have to save all the potential data. There may be up to
    65535 such values, which is too large to put on the stack, but using malloc
    for small numbers seems expensive. As a compromise, the stack is used when
    there are no more than REC_STACK_SAVE_MAX values to store; otherwise malloc
    is used. A problem is what to do if the malloc fails ... there is no way of
    returning to the top level with an error. Save the top REC_STACK_SAVE_MAX
    values on the stack, and accept that the rest may be wrong.

    There are also other values that have to be saved. We use a chained
    sequence of blocks that actually live on the stack. Thanks to Robin Houston
    for the original version of this logic. */

    case OP_RECURSE:
      {
      callpat = md->start_code + GET(ecode, 1);
      new_recursive.group_num = *callpat - OP_BRA;

      /* For extended extraction brackets (large number), we have to fish out
      the number from a dummy opcode at the start. */

      if (new_recursive.group_num > EXTRACT_BASIC_MAX)
        new_recursive.group_num = GET2(callpat, 2+LINK_SIZE);

      /* Add to "recursing stack" */

      new_recursive.prevrec = md->recursive;
      md->recursive = &new_recursive;

      /* Find where to continue from afterwards */

      ecode += 1 + LINK_SIZE;
      new_recursive.after_call = ecode;

      /* Now save the offset data. */

      new_recursive.saved_max = md->offset_end;
      if (new_recursive.saved_max <= REC_STACK_SAVE_MAX)
        new_recursive.offset_save = stacksave;
      else
        {
        new_recursive.offset_save =
          (int *)(pcre_malloc)(new_recursive.saved_max * sizeof(int));
        if (new_recursive.offset_save == NULL) RRETURN(PCRE_ERROR_NOMEMORY);
        }

      memcpy(new_recursive.offset_save, md->offset_vector,
            new_recursive.saved_max * sizeof(int));
      new_recursive.save_start = md->start_match;
      md->start_match = eptr;

      /* OK, now we can do the recursion. For each top-level alternative we
      restore the offset and recursion data. */

      DPRINTF(("Recursing into group %d\n", new_recursive.group_num));
      do
        {
        RMATCH(rrc, eptr, callpat + 1 + LINK_SIZE, offset_top, md, ims,
            eptrb, match_isgroup);
        if (rrc == MATCH_MATCH)
          {
          md->recursive = new_recursive.prevrec;
          if (new_recursive.offset_save != stacksave)
            (pcre_free)(new_recursive.offset_save);
          RRETURN(MATCH_MATCH);
          }
        else if (rrc != MATCH_NOMATCH) RRETURN(rrc);

        md->recursive = &new_recursive;
        memcpy(md->offset_vector, new_recursive.offset_save,
            new_recursive.saved_max * sizeof(int));
        callpat += GET(callpat, 1);
        }
      while (*callpat == OP_ALT);

      DPRINTF(("Recursion didn't match\n"));
      md->recursive = new_recursive.prevrec;
      if (new_recursive.offset_save != stacksave)
        (pcre_free)(new_recursive.offset_save);
      RRETURN(MATCH_NOMATCH);
      }
    /* Control never reaches here */

    /* "Once" brackets are like assertion brackets except that after a match,
    the point in the subject string is not moved back. Thus there can never be
    a move back into the brackets. Friedl calls these "atomic" subpatterns.
    Check the alternative branches in turn - the matching won't pass the KET
    for this kind of subpattern. If any one branch matches, we carry on as at
    the end of a normal bracket, leaving the subject pointer. */

    case OP_ONCE:
      {
      prev = ecode;
      saved_eptr = eptr;

      do
        {
        RMATCH(rrc, eptr, ecode + 1 + LINK_SIZE, offset_top, md, ims,
          eptrb, match_isgroup);
        if (rrc == MATCH_MATCH) break;
        if (rrc != MATCH_NOMATCH) RRETURN(rrc);
        ecode += GET(ecode,1);
        }
      while (*ecode == OP_ALT);

      /* If hit the end of the group (which could be repeated), fail */

      if (*ecode != OP_ONCE && *ecode != OP_ALT) RRETURN(MATCH_NOMATCH);

      /* Continue as from after the assertion, updating the offsets high water
      mark, since extracts may have been taken. */

      do ecode += GET(ecode,1); while (*ecode == OP_ALT);

      offset_top = md->end_offset_top;
      eptr = md->end_match_ptr;

      /* For a non-repeating ket, just continue at this level. This also
      happens for a repeating ket if no characters were matched in the group.
      This is the forcible breaking of infinite loops as implemented in Perl
      5.005. If there is an options reset, it will get obeyed in the normal
      course of events. */

      if (*ecode == OP_KET || eptr == saved_eptr)
        {
        ecode += 1+LINK_SIZE;
        break;
        }

      /* The repeating kets try the rest of the pattern or restart from the
      preceding bracket, in the appropriate order. We need to reset any options
      that changed within the bracket before re-running it, so check the next
      opcode. */

      if (ecode[1+LINK_SIZE] == OP_OPT)
        {
        ims = (ims & ~PCRE_IMS) | ecode[4];
        DPRINTF(("ims set to %02lx at group repeat\n", ims));
        }

      if (*ecode == OP_KETRMIN)
        {
        RMATCH(rrc, eptr, ecode + 1 + LINK_SIZE, offset_top, md, ims, eptrb, 0);
        if (rrc != MATCH_NOMATCH) RRETURN(rrc);
        RMATCH(rrc, eptr, prev, offset_top, md, ims, eptrb, match_isgroup);
        if (rrc != MATCH_NOMATCH) RRETURN(rrc);
        }
      else  /* OP_KETRMAX */
        {
        RMATCH(rrc, eptr, prev, offset_top, md, ims, eptrb, match_isgroup);
        if (rrc != MATCH_NOMATCH) RRETURN(rrc);
        RMATCH(rrc, eptr, ecode + 1+LINK_SIZE, offset_top, md, ims, eptrb, 0);
        if (rrc != MATCH_NOMATCH) RRETURN(rrc);
        }
      }
    RRETURN(MATCH_NOMATCH);

    /* An alternation is the end of a branch; scan along to find the end of the
    bracketed group and go to there. */

    case OP_ALT:
    do ecode += GET(ecode,1); while (*ecode == OP_ALT);
    break;

    /* BRAZERO and BRAMINZERO occur just before a bracket group, indicating
    that it may occur zero times. It may repeat infinitely, or not at all -
    i.e. it could be ()* or ()? in the pattern. Brackets with fixed upper
    repeat limits are compiled as a number of copies, with the optional ones
    preceded by BRAZERO or BRAMINZERO. */

    case OP_BRAZERO:
      {
      next = ecode+1;
      RMATCH(rrc, eptr, next, offset_top, md, ims, eptrb, match_isgroup);
      if (rrc != MATCH_NOMATCH) RRETURN(rrc);
      do next += GET(next,1); while (*next == OP_ALT);
      ecode = next + 1+LINK_SIZE;
      }
    break;

    case OP_BRAMINZERO:
      {
      next = ecode+1;
      do next += GET(next,1); while (*next == OP_ALT);
      RMATCH(rrc, eptr, next + 1+LINK_SIZE, offset_top, md, ims, eptrb,
        match_isgroup);
      if (rrc != MATCH_NOMATCH) RRETURN(rrc);
      ecode++;
      }
    break;

    /* End of a group, repeated or non-repeating. If we are at the end of
    an assertion "group", stop matching and return MATCH_MATCH, but record the
    current high water mark for use by positive assertions. Do this also
    for the "once" (not-backup up) groups. */

    case OP_KET:
    case OP_KETRMIN:
    case OP_KETRMAX:
      {
      prev = ecode - GET(ecode, 1);
      saved_eptr = eptrb->epb_saved_eptr;

      /* Back up the stack of bracket start pointers. */

      eptrb = eptrb->epb_prev;

      if (*prev == OP_ASSERT || *prev == OP_ASSERT_NOT ||
          *prev == OP_ASSERTBACK || *prev == OP_ASSERTBACK_NOT ||
          *prev == OP_ONCE)
        {
        md->end_match_ptr = eptr;      /* For ONCE */
        md->end_offset_top = offset_top;
        RRETURN(MATCH_MATCH);
        }

      /* In all other cases except a conditional group we have to check the
      group number back at the start and if necessary complete handling an
      extraction by setting the offsets and bumping the high water mark. */

      if (*prev != OP_COND)
        {
        number = *prev - OP_BRA;

        /* For extended extraction brackets (large number), we have to fish out
        the number from a dummy opcode at the start. */

        if (number > EXTRACT_BASIC_MAX) number = GET2(prev, 2+LINK_SIZE);
        offset = number << 1;

#ifdef DEBUG
        printf("end bracket %d", number);
        printf("\n");
#endif

        /* Test for a numbered group. This includes groups called as a result
        of recursion. Note that whole-pattern recursion is coded as a recurse
        into group 0, so it won't be picked up here. Instead, we catch it when
        the OP_END is reached. */

        if (number > 0)
          {
          md->capture_last = number;
          if (offset >= md->offset_max) md->offset_overflow = TRUE; else
            {
            md->offset_vector[offset] =
              md->offset_vector[md->offset_end - number];
            md->offset_vector[offset+1] = eptr - md->start_subject;
            if (offset_top <= offset) offset_top = offset + 2;
            }

          /* Handle a recursively called group. Restore the offsets
          appropriately and continue from after the call. */

          if (md->recursive != NULL && md->recursive->group_num == number)
            {
            recursion_info *rec = md->recursive;
            DPRINTF(("Recursion (%d) succeeded - continuing\n", number));
            md->recursive = rec->prevrec;
            md->start_match = rec->save_start;
            memcpy(md->offset_vector, rec->offset_save,
              rec->saved_max * sizeof(int));
            ecode = rec->after_call;
            ims = original_ims;
            break;
            }
          }
        }

      /* Reset the value of the ims flags, in case they got changed during
      the group. */

      ims = original_ims;
      DPRINTF(("ims reset to %02lx\n", ims));

      /* For a non-repeating ket, just continue at this level. This also
      happens for a repeating ket if no characters were matched in the group.
      This is the forcible breaking of infinite loops as implemented in Perl
      5.005. If there is an options reset, it will get obeyed in the normal
      course of events. */

      if (*ecode == OP_KET || eptr == saved_eptr)
        {
        ecode += 1 + LINK_SIZE;
        break;
        }

      /* The repeating kets try the rest of the pattern or restart from the
      preceding bracket, in the appropriate order. */

      if (*ecode == OP_KETRMIN)
        {
        RMATCH(rrc, eptr, ecode +