/[pcre]/code/tags/pcre-4.3/internal.h
ViewVC logotype

Diff of /code/tags/pcre-4.3/internal.h

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 21 by nigel, Sat Feb 24 21:38:37 2007 UTC revision 63 by nigel, Sat Feb 24 21:40:03 2007 UTC
# Line 3  Line 3 
3  *************************************************/  *************************************************/
4    
5    
 #define PCRE_VERSION       "1.09 28-Apr-1998"  
   
   
6  /* This is a library of functions to support regular expressions whose syntax  /* This is a library of functions to support regular expressions whose syntax
7  and semantics are as close as possible to those of the Perl 5 language. See  and semantics are as close as possible to those of the Perl 5 language. See
8  the file Tech.Notes for some information on the internals.  the file Tech.Notes for some information on the internals.
9    
10  Written by: Philip Hazel <ph10@cam.ac.uk>  Written by: Philip Hazel <ph10@cam.ac.uk>
11    
12             Copyright (c) 1998 University of Cambridge             Copyright (c) 1997-2003 University of Cambridge
13    
14  -----------------------------------------------------------------------------  -----------------------------------------------------------------------------
15  Permission is granted to anyone to use this software for any purpose on any  Permission is granted to anyone to use this software for any purpose on any
# Line 28  restrictions: Line 25  restrictions:
25    
26  3. Altered versions must be plainly marked as such, and must not be  3. Altered versions must be plainly marked as such, and must not be
27     misrepresented as being the original software.     misrepresented as being the original software.
28    
29    4. If PCRE is embedded in any software that is released under the GNU
30       General Purpose Licence (GPL), then the terms of that licence shall
31       supersede any condition above with which it is incompatible.
32  -----------------------------------------------------------------------------  -----------------------------------------------------------------------------
33  */  */
34    
35  /* This header contains definitions that are shared between the different  /* This header contains definitions that are shared between the different
36  modules, but which are not relevant to the outside. */  modules, but which are not relevant to the outside. */
37    
38    /* Get the definitions provided by running "configure" */
39    
40    #include "config.h"
41    
42    /* When compiling for use with the Virtual Pascal compiler, these functions
43    need to have their names changed. PCRE must be compiled with the -DVPCOMPAT
44    option on the command line. */
45    
46    #ifdef VPCOMPAT
47    #define strncmp(s1,s2,m) _strncmp(s1,s2,m)
48    #define memcpy(d,s,n)    _memcpy(d,s,n)
49    #define memmove(d,s,n)   _memmove(d,s,n)
50    #define memset(s,c,n)    _memset(s,c,n)
51    #else  /* VPCOMPAT */
52    
53  /* To cope with SunOS4 and other systems that lack memmove() but have bcopy(),  /* To cope with SunOS4 and other systems that lack memmove() but have bcopy(),
54  define a macro for memmove() if USE_BCOPY is defined. */  define a macro for memmove() if HAVE_MEMMOVE is false, provided that HAVE_BCOPY
55    is set. Otherwise, include an emulating function for those systems that have
56    neither (there some non-Unix environments where this is the case). This assumes
57    that all calls to memmove are moving strings upwards in store, which is the
58    case in PCRE. */
59    
60  #ifdef USE_BCOPY  #if ! HAVE_MEMMOVE
61  #undef  memmove        /* some systems may have a macro */  #undef  memmove        /* some systems may have a macro */
62    #if HAVE_BCOPY
63  #define memmove(a, b, c) bcopy(b, a, c)  #define memmove(a, b, c) bcopy(b, a, c)
64    #else  /* HAVE_BCOPY */
65    void *
66    pcre_memmove(unsigned char *dest, const unsigned char *src, size_t n)
67    {
68    int i;
69    dest += n;
70    src += n;
71    for (i = 0; i < n; ++i) *(--dest) =  *(--src);
72    }
73    #define memmove(a, b, c) pcre_memmove(a, b, c)
74    #endif   /* not HAVE_BCOPY */
75    #endif   /* not HAVE_MEMMOVE */
76    #endif   /* not VPCOMPAT */
77    
78    
79    /* PCRE keeps offsets in its compiled code as 2-byte quantities by default.
80    These are used, for example, to link from the start of a subpattern to its
81    alternatives and its end. The use of 2 bytes per offset limits the size of the
82    compiled regex to around 64K, which is big enough for almost everybody.
83    However, I received a request for an even bigger limit. For this reason, and
84    also to make the code easier to maintain, the storing and loading of offsets
85    from the byte string is now handled by the macros that are defined here.
86    
87    The macros are controlled by the value of LINK_SIZE. This defaults to 2 in
88    the config.h file, but can be overridden by using -D on the command line. This
89    is automated on Unix systems via the "configure" command. */
90    
91    #if LINK_SIZE == 2
92    
93    #define PUT(a,n,d)   \
94      (a[n] = (d) >> 8), \
95      (a[(n)+1] = (d) & 255)
96    
97    #define GET(a,n) \
98      (((a)[n] << 8) | (a)[(n)+1])
99    
100    #define MAX_PATTERN_SIZE (1 << 16)
101    
102    
103    #elif LINK_SIZE == 3
104    
105    #define PUT(a,n,d)       \
106      (a[n] = (d) >> 16),    \
107      (a[(n)+1] = (d) >> 8), \
108      (a[(n)+2] = (d) & 255)
109    
110    #define GET(a,n) \
111      (((a)[n] << 16) | ((a)[(n)+1] << 8) | (a)[(n)+2])
112    
113    #define MAX_PATTERN_SIZE (1 << 24)
114    
115    
116    #elif LINK_SIZE == 4
117    
118    #define PUT(a,n,d)        \
119      (a[n] = (d) >> 24),     \
120      (a[(n)+1] = (d) >> 16), \
121      (a[(n)+2] = (d) >> 8),  \
122      (a[(n)+3] = (d) & 255)
123    
124    #define GET(a,n) \
125      (((a)[n] << 24) | ((a)[(n)+1] << 16) | ((a)[(n)+2] << 8) | (a)[(n)+3])
126    
127    #define MAX_PATTERN_SIZE (1 << 30)   /* Keep it positive */
128    
129    
130    #else
131    #error LINK_SIZE must be either 2, 3, or 4
132  #endif  #endif
133    
134    
135    /* Convenience macro defined in terms of the others */
136    
137    #define PUTINC(a,n,d)   PUT(a,n,d), a += LINK_SIZE
138    
139    
140    /* PCRE uses some other 2-byte quantities that do not change when the size of
141    offsets changes. There are used for repeat counts and for other things such as
142    capturing parenthesis numbers in back references. */
143    
144    #define PUT2(a,n,d)   \
145      a[n] = (d) >> 8; \
146      a[(n)+1] = (d) & 255
147    
148    #define GET2(a,n) \
149      (((a)[n] << 8) | (a)[(n)+1])
150    
151    #define PUT2INC(a,n,d)  PUT2(a,n,d), a += 2
152    
153    
154  /* Standard C headers plus the external interface definition */  /* Standard C headers plus the external interface definition */
155    
156  #include <ctype.h>  #include <ctype.h>
157  #include <limits.h>  #include <limits.h>
 #include <setjmp.h>  
158  #include <stddef.h>  #include <stddef.h>
159  #include <stdio.h>  #include <stdio.h>
160  #include <stdlib.h>  #include <stdlib.h>
161  #include <string.h>  #include <string.h>
162    
163    #ifndef PCRE_SPY
164    #define PCRE_DEFINITION       /* Win32 __declspec(export) trigger for .dll */
165    #endif
166    
167  #include "pcre.h"  #include "pcre.h"
168    
169  /* In case there is no definition of offsetof() provided - though any proper  /* In case there is no definition of offsetof() provided - though any proper
# Line 60  Standard C system should have one. */ Line 173  Standard C system should have one. */
173  #define offsetof(p_type,field) ((size_t)&(((p_type *)0)->field))  #define offsetof(p_type,field) ((size_t)&(((p_type *)0)->field))
174  #endif  #endif
175    
176  /* Private options flags start at the most significant end of the two bytes.  /* These are the public options that can change during matching. */
177  The public options defined in pcre.h start at the least significant end. Make  
178  sure they don't overlap! */  #define PCRE_IMS (PCRE_CASELESS|PCRE_MULTILINE|PCRE_DOTALL)
179    
180  #define PCRE_FIRSTSET           0x8000  /* first_char is set */  /* Private options flags start at the most significant end of the four bytes,
181  #define PCRE_STARTLINE          0x4000  /* start after \n for multiline */  but skip the top bit so we can use ints for convenience without getting tangled
182  #define PCRE_COMPILED_CASELESS  0x2000  /* like it says */  with negative values. The public options defined in pcre.h start at the least
183    significant end. Make sure they don't overlap, though now that we have expanded
184    to four bytes there is plenty of space. */
185    
186    #define PCRE_FIRSTSET      0x40000000  /* first_byte is set */
187    #define PCRE_REQCHSET      0x20000000  /* req_byte is set */
188    #define PCRE_STARTLINE     0x10000000  /* start after \n for multiline */
189    #define PCRE_ICHANGED      0x08000000  /* i option changes within regex */
190    
191  /* Options for the "extra" block produced by pcre_study(). */  /* Options for the "extra" block produced by pcre_study(). */
192    
193  #define PCRE_STUDY_CASELESS 0x01     /* study was caseless */  #define PCRE_STUDY_MAPPED   0x01     /* a map of starting chars exists */
 #define PCRE_STUDY_MAPPED   0x02     /* a map of starting chars exists */  
194    
195  /* Masks for identifying the public options: all permitted at compile time,  /* Masks for identifying the public options which are permitted at compile
196  only some permitted at run or study time. */  time, run time or study time, respectively. */
197    
198  #define PUBLIC_OPTIONS \  #define PUBLIC_OPTIONS \
199    (PCRE_CASELESS|PCRE_EXTENDED|PCRE_ANCHORED|PCRE_MULTILINE| \    (PCRE_CASELESS|PCRE_EXTENDED|PCRE_ANCHORED|PCRE_MULTILINE| \
200     PCRE_DOTALL|PCRE_DOLLAR_ENDONLY|PCRE_EXTRA|PCRE_UNGREEDY)     PCRE_DOTALL|PCRE_DOLLAR_ENDONLY|PCRE_EXTRA|PCRE_UNGREEDY|PCRE_UTF8| \
201       PCRE_NO_AUTO_CAPTURE)
202    
203  #define PUBLIC_EXEC_OPTIONS \  #define PUBLIC_EXEC_OPTIONS \
204    (PCRE_CASELESS|PCRE_ANCHORED|PCRE_MULTILINE|PCRE_NOTBOL|PCRE_NOTEOL| \    (PCRE_ANCHORED|PCRE_NOTBOL|PCRE_NOTEOL|PCRE_NOTEMPTY)
    PCRE_DOTALL|PCRE_DOLLAR_ENDONLY)  
205    
206  #define PUBLIC_STUDY_OPTIONS (PCRE_CASELESS)  #define PUBLIC_STUDY_OPTIONS 0   /* None defined */
207    
208  /* Magic number to provide a small check against being handed junk. */  /* Magic number to provide a small check against being handed junk. */
209    
210  #define MAGIC_NUMBER  0x50435245   /* 'PCRE' */  #define MAGIC_NUMBER  0x50435245UL   /* 'PCRE' */
211    
212    /* Negative values for the firstchar and reqchar variables */
213    
214    #define REQ_UNSET (-2)
215    #define REQ_NONE  (-1)
216    
217    /* Flags added to firstchar or reqchar */
218    
219    #define REQ_CASELESS 0x0100    /* indicates caselessness */
220    #define REQ_EOL      0x0200    /* indicates reqchar followed by $ */
221    
222  /* Miscellaneous definitions */  /* Miscellaneous definitions */
223    
# Line 97  typedef int BOOL; Line 226  typedef int BOOL;
226  #define FALSE   0  #define FALSE   0
227  #define TRUE    1  #define TRUE    1
228    
229    /* Escape items that are just an encoding of a particular data value. Note that
230    ESC_n is defined as yet another macro, which is set in config.h to either \n
231    (the default) or \r (which some people want). */
232    
233    #ifndef ESC_e
234    #define ESC_e 27
235    #endif
236    
237    #ifndef ESC_f
238    #define ESC_f '\f'
239    #endif
240    
241    #ifndef ESC_n
242    #define ESC_n NEWLINE
243    #endif
244    
245    #ifndef ESC_r
246    #define ESC_r '\r'
247    #endif
248    
249    #ifndef ESC_t
250    #define ESC_t '\t'
251    #endif
252    
253  /* These are escaped items that aren't just an encoding of a particular data  /* These are escaped items that aren't just an encoding of a particular data
254  value such as \n. They must have non-zero values, as check_escape() returns  value such as \n. They must have non-zero values, as check_escape() returns
255  their negation. Also, they must appear in the same order as in the opcode  their negation. Also, they must appear in the same order as in the opcode
256  definitions below, up to ESC_Z. The final one must be ESC_REF as subsequent  definitions below, up to ESC_z. There's a dummy for OP_ANY because it
257  values are used for \1, \2, \3, etc. There is a test in the code for an escape  corresponds to "." rather than an escape sequence. The final one must be
258  greater than ESC_b and less than ESC_X to detect the types that may be  ESC_REF as subsequent values are used for \1, \2, \3, etc. There is are two
259  repeated. If any new escapes are put in-between that don't consume a character,  tests in the code for an escape greater than ESC_b and less than ESC_Z to
260  that code will have to change. */  detect the types that may be repeated. These are the types that consume a
261    character. If any new escapes are put in between that don't consume a
262  enum { ESC_A = 1, ESC_B, ESC_b, ESC_D, ESC_d, ESC_S, ESC_s, ESC_W, ESC_w,  character, that code will have to change. */
263    
264                      /* These are not Perl escapes, so can't appear in the */  enum { ESC_A = 1, ESC_G, ESC_B, ESC_b, ESC_D, ESC_d, ESC_S, ESC_s, ESC_W,
265         ESC_X,       /* simple table-lookup because they must be conditional */         ESC_w, ESC_dum1, ESC_C, ESC_Z, ESC_z, ESC_E, ESC_Q, ESC_REF };
266                      /* on PCRE_EXTRA. */  
267         ESC_Z,  /* Flag bits and data types for the extended class (OP_XCLASS) for classes that
268         ESC_REF };  contain UTF-8 characters with values greater than 255. */
269    
270    #define XCL_NOT    0x01    /* Flag: this is a negative class */
271    #define XCL_MAP    0x02    /* Flag: a 32-byte map is present */
272    
273    #define XCL_END       0    /* Marks end of individual items */
274    #define XCL_SINGLE    1    /* Single item (one multibyte char) follows */
275    #define XCL_RANGE     2    /* A range (two multibyte chars) follows */
276    
277    
278  /* Opcode table: OP_BRA must be last, as all values >= it are used for brackets  /* Opcode table: OP_BRA must be last, as all values >= it are used for brackets
279  that extract substrings. Starting from 1 (i.e. after OP_END), the values up to  that extract substrings. Starting from 1 (i.e. after OP_END), the values up to
280  OP_EOD must correspond in order to the list of escapes immediately above. */  OP_EOD must correspond in order to the list of escapes immediately above.
281    Note that whenever this list is updated, the two macro definitions that follow
282    must also be updated to match. */
283    
284  enum {  enum {
285    OP_END,            /* End of pattern */    OP_END,            /* 0 End of pattern */
286    
287    /* Values corresponding to backslashed metacharacters */    /* Values corresponding to backslashed metacharacters */
288    
289    OP_SOD,            /* Start of data: \A */    OP_SOD,            /* 1 Start of data: \A */
290    OP_NOT_WORD_BOUNDARY,  /* \B */    OP_SOM,            /* 2 Start of match (subject + offset): \G */
291    OP_WORD_BOUNDARY,      /* \b */    OP_NOT_WORD_BOUNDARY,  /*  3 \B */
292    OP_NOT_DIGIT,          /* \D */    OP_WORD_BOUNDARY,      /*  4 \b */
293    OP_DIGIT,              /* \d */    OP_NOT_DIGIT,          /*  5 \D */
294    OP_NOT_WHITESPACE,     /* \S */    OP_DIGIT,              /*  6 \d */
295    OP_WHITESPACE,         /* \s */    OP_NOT_WHITESPACE,     /*  7 \S */
296    OP_NOT_WORDCHAR,       /* \W */    OP_WHITESPACE,         /*  8 \s */
297    OP_WORDCHAR,           /* \w */    OP_NOT_WORDCHAR,       /*  9 \W */
298    OP_CUT,            /* The analogue of Prolog's "cut" operation (extension) */    OP_WORDCHAR,           /* 10 \w */
299    OP_EOD,            /* End of data: \Z. */    OP_ANY,            /* 11 Match any character */
300      OP_ANYBYTE,        /* 12 Match any byte (\C); different to OP_ANY for UTF-8 */
301    OP_CIRC,           /* Start of line - varies with multiline switch */    OP_EODN,           /* 13 End of data or \n at end of data: \Z. */
302    OP_DOLL,           /* End of line - varies with multiline switch */    OP_EOD,            /* 14 End of data: \z */
303    OP_ANY,            /* Match any character */  
304    OP_CHARS,          /* Match string of characters */    OP_OPT,            /* 15 Set runtime options */
305    OP_NOT,            /* Match anything but the following char */    OP_CIRC,           /* 16 Start of line - varies with multiline switch */
306      OP_DOLL,           /* 17 End of line - varies with multiline switch */
307    OP_STAR,           /* The maximizing and minimizing versions of */    OP_CHARS,          /* 18 Match string of characters */
308    OP_MINSTAR,        /* all these opcodes must come in pairs, with */    OP_NOT,            /* 19 Match anything but the following char */
309    OP_PLUS,           /* the minimizing one second. */  
310    OP_MINPLUS,        /* This first set applies to single characters */    OP_STAR,           /* 20 The maximizing and minimizing versions of */
311    OP_QUERY,    OP_MINSTAR,        /* 21 all these opcodes must come in pairs, with */
312    OP_MINQUERY,    OP_PLUS,           /* 22 the minimizing one second. */
313    OP_UPTO,           /* From 0 to n matches */    OP_MINPLUS,        /* 23 This first set applies to single characters */
314    OP_MINUPTO,    OP_QUERY,          /* 24 */
315    OP_EXACT,          /* Exactly n matches */    OP_MINQUERY,       /* 25 */
316      OP_UPTO,           /* 26 From 0 to n matches */
317    OP_NOTSTAR,        /* The maximizing and minimizing versions of */    OP_MINUPTO,        /* 27 */
318    OP_NOTMINSTAR,     /* all these opcodes must come in pairs, with */    OP_EXACT,          /* 28 Exactly n matches */
319    OP_NOTPLUS,        /* the minimizing one second. */  
320    OP_NOTMINPLUS,     /* This first set applies to "not" single characters */    OP_NOTSTAR,        /* 29 The maximizing and minimizing versions of */
321    OP_NOTQUERY,    OP_NOTMINSTAR,     /* 30 all these opcodes must come in pairs, with */
322    OP_NOTMINQUERY,    OP_NOTPLUS,        /* 31 the minimizing one second. */
323    OP_NOTUPTO,        /* From 0 to n matches */    OP_NOTMINPLUS,     /* 32 This set applies to "not" single characters */
324    OP_NOTMINUPTO,    OP_NOTQUERY,       /* 33 */
325    OP_NOTEXACT,       /* Exactly n matches */    OP_NOTMINQUERY,    /* 34 */
326      OP_NOTUPTO,        /* 35 From 0 to n matches */
327    OP_TYPESTAR,       /* The maximizing and minimizing versions of */    OP_NOTMINUPTO,     /* 36 */
328    OP_TYPEMINSTAR,    /* all these opcodes must come in pairs, with */    OP_NOTEXACT,       /* 37 Exactly n matches */
329    OP_TYPEPLUS,       /* the minimizing one second. These codes must */  
330    OP_TYPEMINPLUS,    /* be in exactly the same order as those above. */    OP_TYPESTAR,       /* 38 The maximizing and minimizing versions of */
331    OP_TYPEQUERY,      /* This set applies to character types such as \d */    OP_TYPEMINSTAR,    /* 39 all these opcodes must come in pairs, with */
332    OP_TYPEMINQUERY,    OP_TYPEPLUS,       /* 40 the minimizing one second. These codes must */
333    OP_TYPEUPTO,       /* From 0 to n matches */    OP_TYPEMINPLUS,    /* 41 be in exactly the same order as those above. */
334    OP_TYPEMINUPTO,    OP_TYPEQUERY,      /* 42 This set applies to character types such as \d */
335    OP_TYPEEXACT,      /* Exactly n matches */    OP_TYPEMINQUERY,   /* 43 */
336      OP_TYPEUPTO,       /* 44 From 0 to n matches */
337    OP_CRSTAR,         /* The maximizing and minimizing versions of */    OP_TYPEMINUPTO,    /* 45 */
338    OP_CRMINSTAR,      /* all these opcodes must come in pairs, with */    OP_TYPEEXACT,      /* 46 Exactly n matches */
339    OP_CRPLUS,         /* the minimizing one second. These codes must */  
340    OP_CRMINPLUS,      /* be in exactly the same order as those above. */    OP_CRSTAR,         /* 47 The maximizing and minimizing versions of */
341    OP_CRQUERY,        /* These are for character classes and back refs */    OP_CRMINSTAR,      /* 48 all these opcodes must come in pairs, with */
342    OP_CRMINQUERY,    OP_CRPLUS,         /* 49 the minimizing one second. These codes must */
343    OP_CRRANGE,        /* These are different to the three seta above. */    OP_CRMINPLUS,      /* 50 be in exactly the same order as those above. */
344    OP_CRMINRANGE,    OP_CRQUERY,        /* 51 These are for character classes and back refs */
345      OP_CRMINQUERY,     /* 52 */
346    OP_CLASS,          /* Match a character class */    OP_CRRANGE,        /* 53 These are different to the three seta above. */
347    OP_NEGCLASS,       /* Match a character class, specified negatively */    OP_CRMINRANGE,     /* 54 */
348    OP_REF,            /* Match a back reference */  
349      OP_CLASS,          /* 55 Match a character class, chars < 256 only */
350    OP_ALT,            /* Start of alternation */    OP_NCLASS,         /* 56 Same, but the bitmap was created from a negative
351    OP_KET,            /* End of group that doesn't have an unbounded repeat */                             class - the difference is relevant only when a UTF-8
352    OP_KETRMAX,        /* These two must remain together and in this */                             character > 255 is encountered. */
353    OP_KETRMIN,        /* order. They are for groups the repeat for ever. */  
354      OP_XCLASS,         /* 56 Extended class for handling UTF-8 chars within the
355    OP_ASSERT,                             class. This does both positive and negative. */
356    OP_ASSERT_NOT,  
357    OP_ONCE,           /* Once matched, don't back up into the subpattern */    OP_REF,            /* 57 Match a back reference */
358      OP_RECURSE,        /* 58 Match a numbered subpattern (possibly recursive) */
359      OP_CALLOUT,        /* 59 Call out to external function if provided */
360    
361      OP_ALT,            /* 60 Start of alternation */
362      OP_KET,            /* 61 End of group that doesn't have an unbounded repeat */
363      OP_KETRMAX,        /* 62 These two must remain together and in this */
364      OP_KETRMIN,        /* 63 order. They are for groups the repeat for ever. */
365    
366      /* The assertions must come before ONCE and COND */
367    
368      OP_ASSERT,         /* 64 Positive lookahead */
369      OP_ASSERT_NOT,     /* 65 Negative lookahead */
370      OP_ASSERTBACK,     /* 66 Positive lookbehind */
371      OP_ASSERTBACK_NOT, /* 67 Negative lookbehind */
372      OP_REVERSE,        /* 68 Move pointer back - used in lookbehind assertions */
373    
374      /* ONCE and COND must come after the assertions, with ONCE first, as there's
375      a test for >= ONCE for a subpattern that isn't an assertion. */
376    
377      OP_ONCE,           /* 69 Once matched, don't back up into the subpattern */
378      OP_COND,           /* 70 Conditional group */
379      OP_CREF,           /* 71 Used to hold an extraction string number (cond ref) */
380    
381      OP_BRAZERO,        /* 72 These two must remain together and in this */
382      OP_BRAMINZERO,     /* 73 order. */
383    
384      OP_BRANUMBER,      /* 74 Used for extracting brackets whose number is greater
385                               than can fit into an opcode. */
386    
387      OP_BRA             /* 75 This and greater values are used for brackets that
388                               extract substrings up to a basic limit. After that,
389                               use is made of OP_BRANUMBER. */
390    };
391    
392    /* WARNING: There is an implicit assumption in study.c that all opcodes are
393    less than 128 in value. This makes handling UTF-8 character sequences easier.
394    */
395    
   OP_BRAZERO,        /* These two must remain together and in this */  
   OP_BRAMINZERO,     /* order. */  
396    
397    OP_BRA             /* This and greater values are used for brackets that  /* This macro defines textual names for all the opcodes. There are used only
398                          extract substrings. */  for debugging, in pcre.c when DEBUG is defined, and also in pcretest.c. The
399  };  macro is referenced only in printint.c. */
400    
401    #define OP_NAME_LIST \
402      "End", "\\A", "\\G", "\\B", "\\b", "\\D", "\\d",                \
403      "\\S", "\\s", "\\W", "\\w", "Any", "Anybyte", "\\Z", "\\z",     \
404      "Opt", "^", "$", "chars", "not",                                \
405      "*", "*?", "+", "+?", "?", "??", "{", "{", "{",                 \
406      "*", "*?", "+", "+?", "?", "??", "{", "{", "{",                 \
407      "*", "*?", "+", "+?", "?", "??", "{", "{", "{",                 \
408      "*", "*?", "+", "+?", "?", "??", "{", "{",                      \
409      "class", "nclass", "xclass", "Ref", "Recurse", "Callout",       \
410      "Alt", "Ket", "KetRmax", "KetRmin", "Assert", "Assert not",     \
411      "AssertB", "AssertB not", "Reverse", "Once", "Cond", "Cond ref",\
412      "Brazero", "Braminzero", "Branumber", "Bra"
413    
414    
415    /* This macro defines the length of fixed length operations in the compiled
416    regex. The lengths are used when searching for specific things, and also in the
417    debugging printing of a compiled regex. We use a macro so that it can be
418    incorporated both into pcre.c and pcretest.c without being publicly exposed.
419    
420    As things have been extended, some of these are no longer fixed lenths, but are
421    minima instead. For example, the length of a single-character repeat may vary
422    in UTF-8 mode. The code that uses this table must know about such things. */
423    
424    #define OP_LENGTHS \
425      1,                             /* End                                    */ \
426      1, 1, 1, 1, 1, 1, 1, 1, 1, 1,  /* \A, \G, \B, \B, \D, \d, \S, \s, \W, \w */ \
427      1, 1, 1, 1, 2, 1, 1,           /* Any, Anybyte, \Z, \z, Opt, ^, $        */ \
428      2,                             /* Chars - the minimum length             */ \
429      2,                             /* not                                    */ \
430      /* Positive single-char repeats                                          */ \
431      2, 2, 2, 2, 2, 2,              /* *, *?, +, +?, ?, ??      ** These are  */ \
432      4, 4, 4,                       /* upto, minupto, exact     ** minima     */ \
433      /* Negative single-char repeats                                          */ \
434      2, 2, 2, 2, 2, 2,              /* NOT *, *?, +, +?, ?, ??                */ \
435      4, 4, 4,                       /* NOT upto, minupto, exact               */ \
436      /* Positive type repeats                                                 */ \
437      2, 2, 2, 2, 2, 2,              /* Type *, *?, +, +?, ?, ??               */ \
438      4, 4, 4,                       /* Type upto, minupto, exact              */ \
439      /* Character class & ref repeats                                         */ \
440      1, 1, 1, 1, 1, 1,              /* *, *?, +, +?, ?, ??                    */ \
441      5, 5,                          /* CRRANGE, CRMINRANGE                    */ \
442     33,                             /* CLASS                                  */ \
443     33,                             /* NCLASS                                 */ \
444      0,                             /* XCLASS - variable length               */ \
445      3,                             /* REF                                    */ \
446      1+LINK_SIZE,                   /* RECURSE                                */ \
447      2,                             /* CALLOUT                                */ \
448      1+LINK_SIZE,                   /* Alt                                    */ \
449      1+LINK_SIZE,                   /* Ket                                    */ \
450      1+LINK_SIZE,                   /* KetRmax                                */ \
451      1+LINK_SIZE,                   /* KetRmin                                */ \
452      1+LINK_SIZE,                   /* Assert                                 */ \
453      1+LINK_SIZE,                   /* Assert not                             */ \
454      1+LINK_SIZE,                   /* Assert behind                          */ \
455      1+LINK_SIZE,                   /* Assert behind not                      */ \
456      1+LINK_SIZE,                   /* Reverse                                */ \
457      1+LINK_SIZE,                   /* Once                                   */ \
458      1+LINK_SIZE,                   /* COND                                   */ \
459      3,                             /* CREF                                   */ \
460      1, 1,                          /* BRAZERO, BRAMINZERO                    */ \
461      3,                             /* BRANUMBER                              */ \
462      1+LINK_SIZE                    /* BRA                                    */ \
463    
464    
465    /* The highest extraction number before we have to start using additional
466    bytes. (Originally PCRE didn't have support for extraction counts highter than
467    this number.) The value is limited by the number of opcodes left after OP_BRA,
468    i.e. 255 - OP_BRA. We actually set it a bit lower to leave room for additional
469    opcodes. */
470    
471  /* The highest extraction number. This is limited by the number of opcodes  #define EXTRACT_BASIC_MAX  150
 left after OP_BRA, i.e. 255 - OP_BRA. We actually set it somewhat lower. */  
472    
473  #define EXTRACT_MAX  99  /* A magic value for OP_CREF to indicate the "in recursion" condition. */
474    
475    #define CREF_RECURSE  0xffff
476    
477  /* The texts of compile-time error messages are defined as macros here so that  /* The texts of compile-time error messages are defined as macros here so that
478  they can be accessed by the POSIX wrapper and converted into error codes.  Yes,  they can be accessed by the POSIX wrapper and converted into error codes.  Yes,
# Line 222  just to accommodate the POSIX wrapper. * Line 491  just to accommodate the POSIX wrapper. *
491  #define ERR10 "operand of unlimited repeat could match the empty string"  #define ERR10 "operand of unlimited repeat could match the empty string"
492  #define ERR11 "internal error: unexpected repeat"  #define ERR11 "internal error: unexpected repeat"
493  #define ERR12 "unrecognized character after (?"  #define ERR12 "unrecognized character after (?"
494  #define ERR13 "too many capturing parenthesized sub-patterns"  #define ERR13 "POSIX named classes are supported only within a class"
495  #define ERR14 "missing )"  #define ERR14 "missing )"
496  #define ERR15 "back reference to non-existent subpattern"  #define ERR15 "reference to non-existent subpattern"
497  #define ERR16 "erroffset passed as NULL"  #define ERR16 "erroffset passed as NULL"
498  #define ERR17 "unknown option bit(s) set"  #define ERR17 "unknown option bit(s) set"
499  #define ERR18 "missing ) after comment"  #define ERR18 "missing ) after comment"
500  #define ERR19 "too many sets of parentheses"  #define ERR19 "parentheses nested too deeply"
501  #define ERR20 "regular expression too large"  #define ERR20 "regular expression too large"
502  #define ERR21 "failed to get memory"  #define ERR21 "failed to get memory"
503  #define ERR22 "unmatched brackets"  #define ERR22 "unmatched parentheses"
504  #define ERR23 "internal error: code overflow"  #define ERR23 "internal error: code overflow"
505    #define ERR24 "unrecognized character after (?<"
506    #define ERR25 "lookbehind assertion is not fixed length"
507    #define ERR26 "malformed number after (?("
508    #define ERR27 "conditional group contains more than two branches"
509    #define ERR28 "assertion expected after (?("
510    #define ERR29 "(?R or (?digits must be followed by )"
511    #define ERR30 "unknown POSIX class name"
512    #define ERR31 "POSIX collating elements are not supported"
513    #define ERR32 "this version of PCRE is not compiled with PCRE_UTF8 support"
514    #define ERR33 "spare error"
515    #define ERR34 "character value in \\x{...} sequence is too large"
516    #define ERR35 "invalid condition (?(0)"
517    #define ERR36 "\\C not allowed in lookbehind assertion"
518    #define ERR37 "PCRE does not support \\L, \\l, \\N, \\P, \\p, \\U, \\u, or \\X"
519    #define ERR38 "number after (?C is > 255"
520    #define ERR39 "closing ) for (?C expected"
521    #define ERR40 "recursive call could loop indefinitely"
522    #define ERR41 "unrecognized character after (?P"
523    #define ERR42 "syntax error after (?P"
524    #define ERR43 "two named groups have the same name"
525    
526  /* All character handling must be done as unsigned characters. Otherwise there  /* All character handling must be done as unsigned characters. Otherwise there
527  are problems with top-bit-set characters and functions such as isspace().  are problems with top-bit-set characters and functions such as isspace().
# Line 243  Unix, where it is defined in sys/types, Line 532  Unix, where it is defined in sys/types,
532    
533  typedef unsigned char uschar;  typedef unsigned char uschar;
534    
535  /* The real format of the start of the pcre block; the actual code vector  /* The real format of the start of the pcre block; the index of names and the
536  runs on as long as necessary after the end. */  code vector run on as long as necessary after the end. */
537    
538  typedef struct real_pcre {  typedef struct real_pcre {
539    unsigned int  magic_number;    unsigned long int magic_number;
540    unsigned short int options;    size_t size;                        /* Total that was malloced */
541    unsigned char top_bracket;    const unsigned char *tables;        /* Pointer to tables */
542    unsigned char top_backref;    unsigned long int options;
543    unsigned char first_char;    unsigned short int top_bracket;
544    unsigned char code[1];    unsigned short int top_backref;
545      unsigned short int first_byte;
546      unsigned short int req_byte;
547      unsigned short int name_entry_size; /* Size of any name items; 0 => none */
548      unsigned short int name_count;      /* Number of name items */
549  } real_pcre;  } real_pcre;
550    
551  /* The real format of the extra block returned by pcre_study(). */  /* The format of the block used to store data from pcre_study(). */
   
 typedef struct real_pcre_extra {  
   unsigned char options;  
   unsigned char start_bits[32];  
 } real_pcre_extra;  
   
 /* Global tables from chartables.c */  
552    
553  extern uschar pcre_lcc[];  typedef struct pcre_study_data {
554  extern uschar pcre_fcc[];    size_t size;                        /* Total that was malloced */
555  extern uschar pcre_cbits[];    uschar options;
556  extern uschar pcre_ctypes[];    uschar start_bits[32];
557    } pcre_study_data;
558    
559    /* Structure for passing "static" information around between the functions
560    doing the compiling, so that they are thread-safe. */
561    
562    typedef struct compile_data {
563      const uschar *lcc;            /* Points to lower casing table */
564      const uschar *fcc;            /* Points to case-flipping table */
565      const uschar *cbits;          /* Points to character type table */
566      const uschar *ctypes;         /* Points to table of type maps */
567      const uschar *start_code;     /* The start of the compiled code */
568      uschar *name_table;           /* The name/number table */
569      int  names_found;             /* Number of entries so far */
570      int  name_entry_size;         /* Size of each entry */
571      int  top_backref;             /* Maximum back reference */
572      unsigned int backref_map;     /* Bitmap of low back refs */
573    } compile_data;
574    
575    /* Structure for maintaining a chain of pointers to the currently incomplete
576    branches, for testing for left recursion. */
577    
578    typedef struct branch_chain {
579      struct branch_chain *outer;
580      uschar *current;
581    } branch_chain;
582    
583    /* Structure for items in a linked list that represents an explicit recursive
584    call within the pattern. */
585    
586    typedef struct recursion_info {
587      struct recursion_info *prev;  /* Previous recursion record (or NULL) */
588      int group_num;                /* Number of group that was called */
589      const uschar *after_call;     /* "Return value": points after the call in the expr */
590      const uschar *save_start;     /* Old value of md->start_match */
591      int *offset_save;             /* Pointer to start of saved offsets */
592      int saved_max;                /* Number of saved offsets */
593    } recursion_info;
594    
595    /* Structure for passing "static" information around between the functions
596    doing the matching, so that they are thread-safe. */
597    
598    typedef struct match_data {
599      int    match_call_count;      /* As it says */
600      int    match_limit;           /* As it says */
601      int   *offset_vector;         /* Offset vector */
602      int    offset_end;            /* One past the end */
603      int    offset_max;            /* The maximum usable for return data */
604      const uschar *lcc;            /* Points to lower casing table */
605      const uschar *ctypes;         /* Points to table of type maps */
606      BOOL   offset_overflow;       /* Set if too many extractions */
607      BOOL   notbol;                /* NOTBOL flag */
608      BOOL   noteol;                /* NOTEOL flag */
609      BOOL   utf8;                  /* UTF8 flag */
610      BOOL   endonly;               /* Dollar not before final \n */
611      BOOL   notempty;              /* Empty string match not wanted */
612      const uschar *start_code;     /* For use when recursing */
613      const uschar *start_subject;  /* Start of the subject string */
614      const uschar *end_subject;    /* End of the subject string */
615      const uschar *start_match;    /* Start of this match attempt */
616      const uschar *end_match_ptr;  /* Subject position at end match */
617      int    end_offset_top;        /* Highwater mark at end of match */
618      int    capture_last;          /* Most recent capture number */
619      int    start_offset;          /* The start offset value */
620      recursion_info *recursive;    /* Linked list of recursion data */
621      void  *callout_data;          /* To pass back to callouts */
622    } match_data;
623    
624  /* Bit definitions for entries in pcre_ctypes[]. */  /* Bit definitions for entries in the pcre_ctypes table. */
625    
626  #define ctype_space   0x01  #define ctype_space   0x01
627  #define ctype_letter  0x02  #define ctype_letter  0x02
# Line 278  extern uschar pcre_ctypes[]; Line 630  extern uschar pcre_ctypes[];
630  #define ctype_word    0x10   /* alphameric or '_' */  #define ctype_word    0x10   /* alphameric or '_' */
631  #define ctype_meta    0x80   /* regexp meta char or zero (end pattern) */  #define ctype_meta    0x80   /* regexp meta char or zero (end pattern) */
632    
633  /* Offsets for the bitmap tables */  /* Offsets for the bitmap tables in pcre_cbits. Each table contains a set
634    of bits for a class map. Some classes are built by combining these tables. */
635    
636  #define cbit_digit    0  #define cbit_space     0      /* [:space:] or \s */
637  #define cbit_letter  32  #define cbit_xdigit   32      /* [:xdigit:] */
638  #define cbit_word    64  #define cbit_digit    64      /* [:digit:] or \d */
639  #define cbit_space   96  #define cbit_upper    96      /* [:upper:] */
640  #define cbit_length 128      /* Length of the cbits table */  #define cbit_lower   128      /* [:lower:] */
641    #define cbit_word    160      /* [:word:] or \w */
642    #define cbit_graph   192      /* [:graph:] */
643    #define cbit_print   224      /* [:print:] */
644    #define cbit_punct   256      /* [:punct:] */
645    #define cbit_cntrl   288      /* [:cntrl:] */
646    #define cbit_length  320      /* Length of the cbits table */
647    
648    /* Offsets of the various tables from the base tables pointer, and
649    total length. */
650    
651    #define lcc_offset      0
652    #define fcc_offset    256
653    #define cbits_offset  512
654    #define ctypes_offset (cbits_offset + cbit_length)
655    #define tables_length (ctypes_offset + 256)
656    
657  /* End of internal.h */  /* End of internal.h */

Legend:
Removed from v.21  
changed lines
  Added in v.63

webmaster@exim.org
ViewVC Help
Powered by ViewVC 1.1.12